From b9b05fff4bf50b03e2e3e39b88a526c4d7403bbb Mon Sep 17 00:00:00 2001 From: Hao Zhu Date: Tue, 11 Dec 2018 22:53:25 +0800 Subject: [PATCH] =?UTF-8?q?[bsp][stm32][stm32f767]=20=E7=A7=BB=E6=A4=8D?= =?UTF-8?q?=E7=89=87=E5=86=85flash=E9=A9=B1=E5=8A=A8?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit 补全了必要的hal库，stm32f767-fire的sram大小更正为512 --- bsp/stm32/libraries/HAL_Drivers/SConscript | 3 + .../HAL_Drivers/config/f7/adc_config.h | 79 + .../HAL_Drivers/config/f7/spi_config.h | 133 + .../HAL_Drivers/drv_flash/drv_flash_f7.c | 312 + bsp/stm32/libraries/HAL_Drivers/drv_spi.c | 65 +- .../Device/ST/STM32F7xx/Include/stm32f730xx.h | 15488 ++++++++++++++ .../Device/ST/STM32F7xx/Include/stm32f750xx.h | 17854 ++++++++++++++++ .../Device/ST/STM32F7xx/Release_Notes.html | 199 + .../Templates/arm/startup_stm32f730xx.s | 463 + .../Templates/arm/startup_stm32f750xx.s | 485 + .../Templates/gcc/startup_stm32f730xx.s | 556 + .../Templates/gcc/startup_stm32f750xx.s | 592 + .../iar/linker/stm32f730xx_ITCM_flash.icf | 35 + .../iar/linker/stm32f730xx_flash.icf | 34 + .../Templates/iar/linker/stm32f730xx_sram.icf | 34 + .../iar/linker/stm32f750xx_ITCM_flash.icf | 35 + .../iar/linker/stm32f750xx_flash.icf | 34 + .../Templates/iar/linker/stm32f750xx_sram.icf | 34 + .../Templates/iar/startup_stm32f730xx.s | 671 + .../Templates/iar/startup_stm32f750xx.s | 735 + .../CMSIS/Documentation/index.html | 14 + .../STM32F7xx_HAL_Driver/Release_Notes.html | 1096 + .../Src/Legacy/stm32f7xx_hal_can.c | 1688 ++ bsp/stm32/stm32f767-fire-challenger/.config | 6 +- bsp/stm32/stm32f767-fire-challenger/README.md | 6 +- .../board/CubeMX_Config/.mxproject | 6 +- .../stm32f767-fire-challenger/board/Kconfig | 6 +- .../stm32f767-fire-challenger/board/board.c | 24 +- .../stm32f767-fire-challenger/board/board.h | 5 +- .../board/ports/fal_cfg.h | 34 + .../stm32f767-fire-challenger/project.uvprojx | 2 +- .../stm32f767-fire-challenger/rtconfig.h | 1 + 32 files changed, 40695 insertions(+), 34 deletions(-) create mode 100644 bsp/stm32/libraries/HAL_Drivers/config/f7/adc_config.h create mode 100644 bsp/stm32/libraries/HAL_Drivers/config/f7/spi_config.h create mode 100644 bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_f7.c create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Include/stm32f730xx.h create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Include/stm32f750xx.h create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Release_Notes.html create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f730xx.s create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f750xx.s create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f730xx.s create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f750xx.s create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_ITCM_flash.icf create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_flash.icf create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_sram.icf create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_ITCM_flash.icf create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_flash.icf create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_sram.icf create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f730xx.s create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f750xx.s create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Documentation/index.html create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Release_Notes.html create mode 100644 bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Src/Legacy/stm32f7xx_hal_can.c create mode 100644 bsp/stm32/stm32f767-fire-challenger/board/ports/fal_cfg.h diff --git a/bsp/stm32/libraries/HAL_Drivers/SConscript b/bsp/stm32/libraries/HAL_Drivers/SConscript index c37704bb8..f9849e81a 100644 --- a/bsp/stm32/libraries/HAL_Drivers/SConscript +++ b/bsp/stm32/libraries/HAL_Drivers/SConscript @@ -47,6 +47,9 @@ if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F1']): if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F4']): src += ['drv_flash/drv_flash_f4.c'] +if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32F7']): + src += ['drv_flash/drv_flash_f7.c'] + if GetDepend(['BSP_USING_ON_CHIP_FLASH', 'SOC_SERIES_STM32L4']): src += ['drv_flash/drv_flash_l4.c'] diff --git a/bsp/stm32/libraries/HAL_Drivers/config/f7/adc_config.h b/bsp/stm32/libraries/HAL_Drivers/config/f7/adc_config.h new file mode 100644 index 000000000..478f4b3ca --- /dev/null +++ b/bsp/stm32/libraries/HAL_Drivers/config/f7/adc_config.h @@ -0,0 +1,79 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-12-06 zylx first version + */ + +#ifndef __ADC_CONFIG_H__ +#define __ADC_CONFIG_H__ + +#include + +#ifdef BSP_USING_ADC1 +#ifndef ADC1_CONFIG +#define ADC1_CONFIG \ + { \ + .Instance = ADC1, \ + .Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4, \ + .Init.Resolution = ADC_RESOLUTION_12B, \ + .Init.DataAlign = ADC_DATAALIGN_RIGHT, \ + .Init.ScanConvMode = DISABLE, \ + .Init.EOCSelection = DISABLE, \ + .Init.ContinuousConvMode = DISABLE, \ + .Init.NbrOfConversion = 1, \ + .Init.DiscontinuousConvMode = DISABLE, \ + .Init.NbrOfDiscConversion = 0, \ + .Init.ExternalTrigConv = ADC_SOFTWARE_START, \ + .Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE, \ + .Init.DMAContinuousRequests = DISABLE, \ + } +#endif /* ADC1_CONFIG */ +#endif /* BSP_USING_ADC1 */ + +#ifdef BSP_USING_ADC2 +#ifndef ADC2_CONFIG +#define ADC2_CONFIG \ + { \ + .Instance = ADC2, \ + .Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4, \ + .Init.Resolution = ADC_RESOLUTION_12B, \ + .Init.DataAlign = ADC_DATAALIGN_RIGHT, \ + .Init.ScanConvMode = DISABLE, \ + .Init.EOCSelection = DISABLE, \ + .Init.ContinuousConvMode = DISABLE, \ + .Init.NbrOfConversion = 1, \ + .Init.DiscontinuousConvMode = DISABLE, \ + .Init.NbrOfDiscConversion = 0, \ + .Init.ExternalTrigConv = ADC_SOFTWARE_START, \ + .Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE, \ + .Init.DMAContinuousRequests = DISABLE, \ + } +#endif /* ADC2_CONFIG */ +#endif /* BSP_USING_ADC2 */ + +#ifdef BSP_USING_ADC3 +#ifndef ADC3_CONFIG +#define ADC3_CONFIG \ + { \ + .Instance = ADC3, \ + .Init.ClockPrescaler = ADC_CLOCK_SYNC_PCLK_DIV4, \ + .Init.Resolution = ADC_RESOLUTION_12B, \ + .Init.DataAlign = ADC_DATAALIGN_RIGHT, \ + .Init.ScanConvMode = DISABLE, \ + .Init.EOCSelection = DISABLE, \ + .Init.ContinuousConvMode = DISABLE, \ + .Init.NbrOfConversion = 1, \ + .Init.DiscontinuousConvMode = DISABLE, \ + .Init.NbrOfDiscConversion = 0, \ + .Init.ExternalTrigConv = ADC_SOFTWARE_START, \ + .Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE, \ + .Init.DMAContinuousRequests = DISABLE, \ + } +#endif /* ADC3_CONFIG */ +#endif /* BSP_USING_ADC3 */ + +#endif /* __ADC_CONFIG_H__ */ diff --git a/bsp/stm32/libraries/HAL_Drivers/config/f7/spi_config.h b/bsp/stm32/libraries/HAL_Drivers/config/f7/spi_config.h new file mode 100644 index 000000000..1fb4ddbf0 --- /dev/null +++ b/bsp/stm32/libraries/HAL_Drivers/config/f7/spi_config.h @@ -0,0 +1,133 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-11-06 SummerGift change to new framework + */ + +#ifndef __SPI_CONFIG_H__ +#define __SPI_CONFIG_H__ + +#include + +#ifdef BSP_USING_SPI1 +#define SPI1_BUS_CONFIG \ + { \ + .Instance = SPI1, \ + .bus_name = "spi1", \ + .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_rx.Instance = DMA2_Stream2, \ + .dma_rx.channel = DMA_CHANNEL_3, \ + .dma_rx.dma_irq = DMA2_Stream2_IRQn, \ + .dma_tx.Instance = DMA2_Stream3, \ + .dma_tx.channel = DMA_CHANNEL_3, \ + .dma_tx.dma_irq = DMA2_Stream3_IRQn, \ + } + +#define SPI1_DMA_RX_IRQHandler DMA2_Stream2_IRQHandler +#define SPI1_DMA_TX_IRQHandler DMA2_Stream3_IRQHandler +#endif + +#ifdef BSP_USING_SPI2 +#define SPI2_BUS_CONFIG \ + { \ + .Instance = SPI2, \ + .bus_name = "spi2", \ + .dma_rx.dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN, \ + .dma_tx.dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN, \ + .dma_rx.Instance = DMA1_Stream3, \ + .dma_rx.channel = DMA_CHANNEL_0, \ + .dma_rx.dma_irq = DMA1_Stream3_IRQn, \ + .dma_tx.Instance = DMA1_Stream4, \ + .dma_tx.channel = DMA_CHANNEL_0, \ + .dma_tx.dma_irq = DMA1_Stream4_IRQn, \ + } + +#define SPI2_DMA_RX_IRQHandler DMA1_Stream3_IRQHandler +#define SPI2_DMA_TX_IRQHandler DMA1_Stream4_IRQHandler +#endif + +#ifdef BSP_USING_SPI3 +#define SPI3_BUS_CONFIG \ + { \ + .Instance = SPI3, \ + .bus_name = "spi3", \ + .dma_rx.dma_rcc = RCC_AHB1ENR_DMA1EN, \ + .dma_tx.dma_rcc = RCC_AHB1ENR_DMA1EN, \ + .dma_rx.Instance = DMA1_Stream0, \ + .dma_rx.channel = DMA_CHANNEL_0, \ + .dma_rx.dma_irq = DMA1_Stream0_IRQn, \ + .dma_tx.Instance = DMA1_Stream7, \ + .dma_tx.channel = DMA_CHANNEL_0, \ + .dma_tx.dma_irq = DMA1_Stream7_IRQn, \ + } + +#define SPI3_DMA_RX_IRQHandler DMA1_Stream0_IRQHandler +#define SPI3_DMA_TX_IRQHandler DMA1_Stream7_IRQHandler +#endif + +#ifdef BSP_USING_SPI4 +#define SPI4_BUS_CONFIG \ + { \ + .Instance = SPI4, \ + .bus_name = "spi4", \ + .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_rx.Instance = DMA2_Stream0, \ + .dma_rx.channel = DMA_CHANNEL_4, \ + .dma_rx.dma_irq = DMA2_Stream0_IRQn, \ + .dma_tx.Instance = DMA2_Stream1, \ + .dma_tx.channel = DMA_CHANNEL_4, \ + .dma_tx.dma_irq = DMA2_Stream1_IRQn, \ + } + +#define SPI4_DMA_RX_IRQHandler DMA2_Stream0_IRQHandler +#define SPI4_DMA_TX_IRQHandler DMA2_Stream1_IRQHandler +#endif + +#ifdef BSP_USING_SPI5 +#define SPI5_BUS_CONFIG \ + { \ + .Instance = SPI5, \ + .bus_name = "spi5", \ + .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_rx.Instance = DMA2_Stream3, \ + .dma_rx.channel = DMA_CHANNEL_2, \ + .dma_rx.dma_irq = DMA2_Stream3_IRQn, \ + .dma_tx.Instance = DMA2_Stream4, \ + .dma_tx.channel = DMA_CHANNEL_2, \ + .dma_tx.dma_irq = DMA2_Stream4_IRQn, \ + } + +#define SPI5_DMA_RX_IRQHandler DMA2_Stream3_IRQHandler +#define SPI5_DMA_TX_IRQHandler DMA2_Stream4_IRQHandler +#endif + +#ifdef BSP_USING_SPI6 +#define SPI5_BUS_CONFIG \ + { \ + .Instance = SPI6, \ + .bus_name = "spi6", \ + .dma_rx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_tx.dma_rcc = RCC_AHB1ENR_DMA2EN, \ + .dma_rx.Instance = DMA2_Stream6, \ + .dma_rx.channel = DMA_CHANNEL_1, \ + .dma_rx.dma_irq = DMA2_Stream6_IRQn, \ + .dma_tx.Instance = DMA2_Stream5, \ + .dma_tx.channel = DMA_CHANNEL_1, \ + .dma_tx.dma_irq = DMA2_Stream5_IRQn, \ + } + +#define SPI6_DMA_RX_IRQHandler DMA2_Stream6_IRQHandler +#define SPI6_DMA_TX_IRQHandler DMA2_Stream5_IRQHandler +#endif + +#endif /*__SPI_CONFIG_H__ */ + + + diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_f7.c b/bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_f7.c new file mode 100644 index 000000000..178cc2923 --- /dev/null +++ b/bsp/stm32/libraries/HAL_Drivers/drv_flash/drv_flash_f7.c @@ -0,0 +1,312 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-12-5 SummerGift first version + */ + +#include "board.h" + +#ifdef BSP_USING_ON_CHIP_FLASH +#include "drv_config.h" +#include "drv_flash.h" + +#if defined(PKG_USING_FAL) +#include "fal.h" +#endif + +//#define DRV_DEBUG +#define LOG_TAG "drv.flash" +#include + +/* Base address of the Flash sectors Bank 1 */ +#define ADDR_FLASH_SECTOR_0 ((uint32_t)0x08000000) /* Base @ of Sector 0, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_1 ((uint32_t)0x08004000) /* Base @ of Sector 1, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_2 ((uint32_t)0x08008000) /* Base @ of Sector 2, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_3 ((uint32_t)0x0800C000) /* Base @ of Sector 3, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_4 ((uint32_t)0x08010000) /* Base @ of Sector 4, 64 Kbytes */ +#define ADDR_FLASH_SECTOR_5 ((uint32_t)0x08020000) /* Base @ of Sector 5, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_6 ((uint32_t)0x08040000) /* Base @ of Sector 6, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_7 ((uint32_t)0x08060000) /* Base @ of Sector 7, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_8 ((uint32_t)0x08080000) /* Base @ of Sector 8, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_9 ((uint32_t)0x080A0000) /* Base @ of Sector 9, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_10 ((uint32_t)0x080C0000) /* Base @ of Sector 10, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_11 ((uint32_t)0x080E0000) /* Base @ of Sector 11, 128 Kbytes */ + +/* Base address of the Flash sectors Bank 2 */ +#define ADDR_FLASH_SECTOR_12 ((uint32_t)0x08100000) /* Base @ of Sector 0, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_13 ((uint32_t)0x08104000) /* Base @ of Sector 1, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_14 ((uint32_t)0x08108000) /* Base @ of Sector 2, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_15 ((uint32_t)0x0810C000) /* Base @ of Sector 3, 16 Kbytes */ +#define ADDR_FLASH_SECTOR_16 ((uint32_t)0x08110000) /* Base @ of Sector 4, 64 Kbytes */ +#define ADDR_FLASH_SECTOR_17 ((uint32_t)0x08120000) /* Base @ of Sector 5, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_18 ((uint32_t)0x08140000) /* Base @ of Sector 6, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_19 ((uint32_t)0x08160000) /* Base @ of Sector 7, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_20 ((uint32_t)0x08180000) /* Base @ of Sector 8, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_21 ((uint32_t)0x081A0000) /* Base @ of Sector 9, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_22 ((uint32_t)0x081C0000) /* Base @ of Sector 10, 128 Kbytes */ +#define ADDR_FLASH_SECTOR_23 ((uint32_t)0x081E0000) /* Base @ of Sector 11, 128 Kbytes */ + +/** + * @brief Gets the sector of a given address + * @param None + * @retval The sector of a given address + */ +static rt_uint32_t GetSector(rt_uint32_t Address) +{ + rt_uint32_t sector = 0; + + if((Address < ADDR_FLASH_SECTOR_1) && (Address >= ADDR_FLASH_SECTOR_0)) + { + sector = FLASH_SECTOR_0; + } + else if((Address < ADDR_FLASH_SECTOR_2) && (Address >= ADDR_FLASH_SECTOR_1)) + { + sector = FLASH_SECTOR_1; + } + else if((Address < ADDR_FLASH_SECTOR_3) && (Address >= ADDR_FLASH_SECTOR_2)) + { + sector = FLASH_SECTOR_2; + } + else if((Address < ADDR_FLASH_SECTOR_4) && (Address >= ADDR_FLASH_SECTOR_3)) + { + sector = FLASH_SECTOR_3; + } + else if((Address < ADDR_FLASH_SECTOR_5) && (Address >= ADDR_FLASH_SECTOR_4)) + { + sector = FLASH_SECTOR_4; + } + else if((Address < ADDR_FLASH_SECTOR_6) && (Address >= ADDR_FLASH_SECTOR_5)) + { + sector = FLASH_SECTOR_5; + } + else if((Address < ADDR_FLASH_SECTOR_7) && (Address >= ADDR_FLASH_SECTOR_6)) + { + sector = FLASH_SECTOR_6; + } + else if((Address < ADDR_FLASH_SECTOR_8) && (Address >= ADDR_FLASH_SECTOR_7)) + { + sector = FLASH_SECTOR_7; + } + else if((Address < ADDR_FLASH_SECTOR_9) && (Address >= ADDR_FLASH_SECTOR_8)) + { + sector = FLASH_SECTOR_8; + } + else if((Address < ADDR_FLASH_SECTOR_10) && (Address >= ADDR_FLASH_SECTOR_9)) + { + sector = FLASH_SECTOR_9; + } + else if((Address < ADDR_FLASH_SECTOR_11) && (Address >= ADDR_FLASH_SECTOR_10)) + { + sector = FLASH_SECTOR_10; + } + else if((Address < ADDR_FLASH_SECTOR_12) && (Address >= ADDR_FLASH_SECTOR_11)) + { + sector = FLASH_SECTOR_11; + } +#if defined(STM32F765xx) || defined(STM32F767xx) || defined(STM32F769xx)|| defined(STM32F777xx) || defined(STM32F779xx) + else if((Address < ADDR_FLASH_SECTOR_13) && (Address >= ADDR_FLASH_SECTOR_12)) + { + sector = FLASH_SECTOR_12; + } + else if((Address < ADDR_FLASH_SECTOR_14) && (Address >= ADDR_FLASH_SECTOR_13)) + { + sector = FLASH_SECTOR_13; + } + else if((Address < ADDR_FLASH_SECTOR_15) && (Address >= ADDR_FLASH_SECTOR_14)) + { + sector = FLASH_SECTOR_14; + } + else if((Address < ADDR_FLASH_SECTOR_16) && (Address >= ADDR_FLASH_SECTOR_15)) + { + sector = FLASH_SECTOR_15; + } + else if((Address < ADDR_FLASH_SECTOR_17) && (Address >= ADDR_FLASH_SECTOR_16)) + { + sector = FLASH_SECTOR_16; + } + else if((Address < ADDR_FLASH_SECTOR_18) && (Address >= ADDR_FLASH_SECTOR_17)) + { + sector = FLASH_SECTOR_17; + } + else if((Address < ADDR_FLASH_SECTOR_19) && (Address >= ADDR_FLASH_SECTOR_18)) + { + sector = FLASH_SECTOR_18; + } + else if((Address < ADDR_FLASH_SECTOR_20) && (Address >= ADDR_FLASH_SECTOR_19)) + { + sector = FLASH_SECTOR_19; + } + else if((Address < ADDR_FLASH_SECTOR_21) && (Address >= ADDR_FLASH_SECTOR_20)) + { + sector = FLASH_SECTOR_20; + } + else if((Address < ADDR_FLASH_SECTOR_22) && (Address >= ADDR_FLASH_SECTOR_21)) + { + sector = FLASH_SECTOR_21; + } + else if((Address < ADDR_FLASH_SECTOR_23) && (Address >= ADDR_FLASH_SECTOR_22)) + { + sector = FLASH_SECTOR_22; + } + else /* (Address < FLASH_END_ADDR) && (Address >= ADDR_FLASH_SECTOR_23) */ + { + sector = FLASH_SECTOR_23; + } +#endif + return sector; +} + +/** + * Read data from flash. + * @note This operation's units is word. + * + * @param addr flash address + * @param buf buffer to store read data + * @param size read bytes size + * + * @return result + */ +int stm32_flash_read(long offset, rt_uint8_t *buf, size_t size) +{ + size_t i; + rt_uint32_t addr = STM32_FLASH_START_ADRESS + offset; + + if ((addr + size) > STM32_FLASH_END_ADDRESS) + { + LOG_E("read outrange flash size! addr is (0x%p)", (void*)(addr + size)); + return -1; + } + + for (i = 0; i < size; i++, buf++, addr++) + { + *buf = *(rt_uint8_t *) addr; + } + + return size; +} + +/** + * Write data to flash. + * @note This operation's units is word. + * @note This operation must after erase. @see flash_erase. + * + * @param addr flash address + * @param buf the write data buffer + * @param size write bytes size + * + * @return result + */ +int stm32_flash_write(long offset, const rt_uint8_t *buf, size_t size) +{ + rt_err_t result = RT_EOK; + rt_uint32_t addr = STM32_FLASH_START_ADRESS + offset; + rt_uint32_t end_addr = addr + size; + + if ((end_addr) > STM32_FLASH_END_ADDRESS) + { + LOG_E("write outrange flash size! addr is (0x%p)", (void*)(addr + size)); + return -RT_EINVAL; + } + + if (size < 1) + { + return -RT_EINVAL; + } + + HAL_FLASH_Unlock(); + + __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR | FLASH_FLAG_ERSERR); + + for (size_t i = 0; i < size; i++, addr++, buf++) + { + /* write data to flash */ + if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, addr, (rt_uint64_t)(*buf)) == HAL_OK) + { + if (*(rt_uint8_t *)addr != *buf) + { + result = -RT_ERROR; + break; + } + } + else + { + result = -RT_ERROR; + break; + } + } + + HAL_FLASH_Lock(); + + if (result != RT_EOK) + { + return result; + } + + return size; +} + +/** + * Erase data on flash. + * @note This operation is irreversible. + * @note This operation's units is different which on many chips. + * + * @param addr flash address + * @param size erase bytes size + * + * @return result + */ +int stm32_flash_erase(long offset, size_t size) +{ + rt_err_t result = RT_EOK; + rt_uint32_t addr = STM32_FLASH_START_ADRESS + offset; + rt_uint32_t FirstSector = 0, NbOfSectors = 0; + rt_uint32_t SECTORError = 0; + + if ((addr + size) > STM32_FLASH_END_ADDRESS) + { + LOG_E("ERROR: erase outrange flash size! addr is (0x%p)\n", (void*)(addr + size)); + return -RT_EINVAL; + } + + /*Variable used for Erase procedure*/ + FLASH_EraseInitTypeDef EraseInitStruct; + + /* Unlock the Flash to enable the flash control register access */ + HAL_FLASH_Unlock(); + + /* Get the 1st sector to erase */ + FirstSector = GetSector(addr); + /* Get the number of sector to erase from 1st sector*/ + NbOfSectors = GetSector(addr + size) - FirstSector + 1; + /* Fill EraseInit structure*/ + EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS; + EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3; + EraseInitStruct.Sector = FirstSector; + EraseInitStruct.NbSectors = NbOfSectors; + + if (HAL_FLASHEx_Erase(&EraseInitStruct, &SECTORError) != HAL_OK) + { + result = -RT_ERROR; + goto __exit; + } + +__exit: + HAL_FLASH_Lock(); + + if (result != RT_EOK) + { + return result; + } + + LOG_D("erase done: addr (0x%p), size %d", (void*)addr, size); + return result; +} + +#if defined(PKG_USING_FAL) +const struct fal_flash_dev stm32_onchip_flash = { "onchip_flash", STM32_FLASH_START_ADRESS, STM32_FLASH_SIZE, (128 * 1024), {NULL, stm32_flash_read, stm32_flash_write, stm32_flash_erase} }; +#endif +#endif /* BSP_USING_ON_CHIP_FLASH */ diff --git a/bsp/stm32/libraries/HAL_Drivers/drv_spi.c b/bsp/stm32/libraries/HAL_Drivers/drv_spi.c index a07391a09..ed0930cc1 100644 --- a/bsp/stm32/libraries/HAL_Drivers/drv_spi.c +++ b/bsp/stm32/libraries/HAL_Drivers/drv_spi.c @@ -9,10 +9,10 @@ */ #include "board.h" - +#define RT_USING_SPI #ifdef RT_USING_SPI - -#if defined(BSP_USING_SPI1) || defined(BSP_USING_SPI2) || defined(BSP_USING_SPI3) || defined(BSP_USING_SPI4) || defined(BSP_USING_SPI5) +#define BSP_USING_SPI1 +#if defined(BSP_USING_SPI1) || defined(BSP_USING_SPI2) || defined(BSP_USING_SPI3) || defined(BSP_USING_SPI4) || defined(BSP_USING_SPI5) || defined(BSP_USING_SPI6) /* this driver can be disabled at menuconfig → RT-Thread Components → Device Drivers */ #include "drv_spi.h" @@ -39,6 +39,9 @@ enum #ifdef BSP_USING_SPI5 SPI5_INDEX, #endif +#ifdef BSP_USING_SPI6 + SPI6_INDEX, +#endif }; static struct stm32_spi_config spi_config[] = @@ -62,6 +65,10 @@ static struct stm32_spi_config spi_config[] = #ifdef BSP_USING_SPI5 SPI5_BUS_CONFIG, #endif + +#ifdef BSP_USING_SPI6 + SPI6_BUS_CONFIG, +#endif }; static struct stm32_spi spi_bus_obj[sizeof(spi_config) / sizeof(spi_config[0])]; @@ -194,7 +201,7 @@ static rt_err_t stm32_spi_init(struct stm32_spi *spi_drv, struct rt_spi_configur return RT_EIO; } -#if defined(SOC_SERIES_STM32L4) +#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) SET_BIT(spi_handle->Instance->CR2, SPI_RXFIFO_THRESHOLD_HF); #endif @@ -220,7 +227,7 @@ static void spi_dma_transfer_prepare(struct rt_spi_bus * spi_bus, struct rt_spi_ * Check if the DMA Stream is disabled before enabling it. * Note that this step is useful when the same Stream is used multiple times. */ -#if defined(SOC_SERIES_STM32F4) +#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) while (hdma_tx->Instance->CR & DMA_SxCR_EN); while (hdma_rx->Instance->CR & DMA_SxCR_EN); #endif @@ -348,7 +355,7 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message * *(volatile rt_uint8_t *)(&spi_handle->Instance->DR) = data; /* receive data once */ -#if defined(SOC_SERIES_STM32L4) +#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) SET_BIT(spi_handle->Instance->CR2, SPI_RXFIFO_THRESHOLD_HF); #endif while (__HAL_SPI_GET_FLAG(spi_handle, SPI_FLAG_RXNE) == RESET); @@ -379,7 +386,7 @@ static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message * *(volatile rt_uint16_t *)(&spi_handle->Instance->DR) = data; /* receive data once */ -#if defined(SOC_SERIES_STM32L4) +#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32F7) SET_BIT(spi_handle->Instance->CR2, SPI_RXFIFO_THRESHOLD_HF); #endif while (__HAL_SPI_GET_FLAG(spi_handle, SPI_FLAG_RXNE) == RESET); @@ -434,7 +441,7 @@ static int rt_hw_spi_bus_init(void) #ifdef BSP_SPI_USING_DMA /* Configure the DMA handler for Transmission process */ spi_bus_obj[i].dma.handle_tx.Instance = spi_config[i].dma_tx.Instance; -#if defined(SOC_SERIES_STM32F4) +#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) spi_bus_obj[i].dma.handle_tx.Init.Channel = spi_config[i].dma_tx.channel; #elif defined(SOC_SERIES_STM32L4) spi_bus_obj[i].dma.handle_tx.Init.Request = spi_config[i].dma_tx.request; @@ -445,7 +452,7 @@ static int rt_hw_spi_bus_init(void) spi_bus_obj[i].dma.handle_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; spi_bus_obj[i].dma.handle_tx.Init.Mode = DMA_NORMAL; spi_bus_obj[i].dma.handle_tx.Init.Priority = DMA_PRIORITY_LOW; -#if defined(SOC_SERIES_STM32F4) +#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) spi_bus_obj[i].dma.handle_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; spi_bus_obj[i].dma.handle_tx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; spi_bus_obj[i].dma.handle_tx.Init.MemBurst = DMA_MBURST_INC4; @@ -453,7 +460,7 @@ static int rt_hw_spi_bus_init(void) #endif spi_bus_obj[i].dma.handle_rx.Instance = spi_config[i].dma_rx.Instance; -#if defined(SOC_SERIES_STM32F4) +#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) spi_bus_obj[i].dma.handle_rx.Init.Channel = spi_config[i].dma_rx.channel; #elif defined(SOC_SERIES_STM32L4) spi_bus_obj[i].dma.handle_rx.Init.Request = spi_config[i].dma_rx.request; @@ -464,7 +471,7 @@ static int rt_hw_spi_bus_init(void) spi_bus_obj[i].dma.handle_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; spi_bus_obj[i].dma.handle_rx.Init.Mode = DMA_NORMAL; spi_bus_obj[i].dma.handle_rx.Init.Priority = DMA_PRIORITY_HIGH; -#if defined(SOC_SERIES_STM32F4) +#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) spi_bus_obj[i].dma.handle_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; spi_bus_obj[i].dma.handle_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; spi_bus_obj[i].dma.handle_rx.Init.MemBurst = DMA_MBURST_INC4; @@ -476,7 +483,7 @@ static int rt_hw_spi_bus_init(void) /* enable DMA clock && Delay after an RCC peripheral clock enabling*/ SET_BIT(RCC->AHBENR, spi_config[i].dma_rx.dma_rcc); tmpreg = READ_BIT(RCC->AHBENR, spi_config[i].dma_rx.dma_rcc); -#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L4) +#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L4) SET_BIT(RCC->AHB1ENR, spi_config[i].dma_rx.dma_rcc); /* Delay after an RCC peripheral clock enabling */ tmpreg = READ_BIT(RCC->AHB1ENR, spi_config[i].dma_rx.dma_rcc); @@ -709,6 +716,40 @@ void SPI5_DMA_TX_IRQHandler(void) } #endif /* defined(BSP_USING_SPI5) && defined(BSP_SPI_USING_DMA) */ +#if defined(BSP_USING_SPI6) && defined(BSP_SPI_USING_DMA) +/** + * @brief This function handles DMA Rx interrupt request. + * @param None + * @retval None + */ +void SPI6_DMA_RX_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + HAL_DMA_IRQHandler(&spi_bus_obj[SPI6_INDEX].dma.handle_rx); + + /* leave interrupt */ + rt_interrupt_leave(); +} + +/** + * @brief This function handles DMA Tx interrupt request. + * @param None + * @retval None + */ +void SPI6_DMA_TX_IRQHandler(void) +{ + /* enter interrupt */ + rt_interrupt_enter(); + + HAL_DMA_IRQHandler(&spi_bus_obj[SPI6_INDEX].dma.handle_tx); + + /* leave interrupt */ + rt_interrupt_leave(); +} +#endif /* defined(BSP_USING_SPI6) && defined(BSP_SPI_USING_DMA) */ + int rt_hw_spi_init(void) { return rt_hw_spi_bus_init(); diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Include/stm32f730xx.h b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Include/stm32f730xx.h new file mode 100644 index 000000000..bcd909b11 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Include/stm32f730xx.h @@ -0,0 +1,15488 @@ +/** + ****************************************************************************** + * @file stm32f730xx.h + * @author MCD Application Team + * @brief CMSIS Cortex-M7 Device Peripheral Access Layer Header File. + * + * This file contains: + * - Data structures and the address mapping for all peripherals + * - Peripheral's registers declarations and bits definition + * - Macros to access peripherals registers hardware + * + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32f730xx + * @{ + */ + +#ifndef __STM32F730xx_H +#define __STM32F730xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief STM32F7xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M7 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M7 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M7 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M7 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M7 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M7 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + AES_IRQn = 79, /*!< AES global interrupt */ + RNG_IRQn = 80, /*!< RNG global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */ + LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ + SDMMC2_IRQn = 103, /*!< SDMMC2 global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +/** + * @brief Configuration of the Cortex-M7 Processor and Core Peripherals + */ +#define __CM7_REV 0x0100U /*!< Cortex-M7 revision r1p0 */ +#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ +#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */ +#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */ +#include "core_cm7.h" /*!< Cortex-M7 processor and core peripherals */ + + +#include "system_stm32f7xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual + AND triple modes, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ + __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ + __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */ + __IO uint32_t OPTCR2; /*!< FLASH option control register 2 , Address offset: 0x1C */ +} FLASH_TypeDef; + + + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */ +} PWR_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, 0x3C */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, 0x5C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ + uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ + __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ + __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ + __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */ + __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */ + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */ + +} TIM_TypeDef; + +/** + * @brief LPTIMIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ +} LPTIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + + +/** + * @brief AES hardware accelerator + */ + +typedef struct +{ + __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */ + __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */ + __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */ + __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */ + __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */ + __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */ + __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */ + __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */ + __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */ + __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */ + __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */ + __IO uint32_t KEYR4; /*!< AES key register 4, Address offset: 0x30 */ + __IO uint32_t KEYR5; /*!< AES key register 5, Address offset: 0x34 */ + __IO uint32_t KEYR6; /*!< AES key register 6, Address offset: 0x38 */ + __IO uint32_t KEYR7; /*!< AES key register 7, Address offset: 0x3C */ + __IO uint32_t SUSP0R; /*!< AES Suspend register 0, Address offset: 0x40 */ + __IO uint32_t SUSP1R; /*!< AES Suspend register 1, Address offset: 0x44 */ + __IO uint32_t SUSP2R; /*!< AES Suspend register 2, Address offset: 0x48 */ + __IO uint32_t SUSP3R; /*!< AES Suspend register 3, Address offset: 0x4C */ + __IO uint32_t SUSP4R; /*!< AES Suspend register 4, Address offset: 0x50 */ + __IO uint32_t SUSP5R; /*!< AES Suspend register 5, Address offset: 0x54 */ + __IO uint32_t SUSP6R; /*!< AES Suspend register 6, Address offset: 0x58 */ + __IO uint32_t SUSP7R; /*!< AES Suspend register 7, Address offset: 0x6C */ +} AES_TypeDef; +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @} + */ + +/** + * @brief USB_OTG_Core_Registers + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ + __IO uint32_t CID; /*!< User ID Register 03Ch */ + uint32_t Reserved5[3]; /*!< Reserved 040h-048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ + uint32_t Reserved6; /*!< Reserved 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */ + uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + +/** + * @brief USB_HS_PHY_Registers + */ +typedef struct +{ + +__IO uint32_t USB_HS_PHYC_PLL; /*!< This register is used to control the PLL of the HS PHY. 000h */ +__IO uint32_t Reserved04; /*!< Reserved 004h */ +__IO uint32_t Reserved08; /*!< Reserved 008h */ +__IO uint32_t USB_HS_PHYC_TUNE; /*!< This register is used to control the tuning interface of the High Speed PHY. 00Ch */ +__IO uint32_t Reserved10; /*!< Reserved 010h */ +__IO uint32_t Reserved14; /*!< Reserved 014h */ +__IO uint32_t USB_HS_PHYC_LDO; /*!< This register is used to control the regulator (LDO). 018h */ +} USB_HS_PHYC_GlobalTypeDef; + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ + __IO uint32_t DCTL; /*!< dev Control Register 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ + uint32_t Reserved0C; /*!< Reserved 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ + uint32_t Reserved20; /*!< Reserved 820h */ + uint32_t Reserved9; /*!< Reserved 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ +} USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ + uint32_t Reserved40C; /*!< Reserved 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ + uint32_t Reserved[2]; /*!< Reserved */ +} USB_OTG_HostChannelTypeDef; +/** + * @} + */ + + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define RAMITCM_BASE 0x00000000U /*!< Base address of : 16KB RAM reserved for CPU execution/instruction accessible over ITCM */ +#define FLASHITCM_BASE 0x00200000U /*!< Base address of : (up to 64 KB) embedded FLASH memory accessible over ITCM */ +#define FLASHAXI_BASE 0x08000000U /*!< Base address of : (up to 64 KB) embedded FLASH memory accessible over AXI */ +#define RAMDTCM_BASE 0x20000000U /*!< Base address of : 64KB system data RAM accessible over DTCM */ +#define PERIPH_BASE 0x40000000U /*!< Base address of : AHB/ABP Peripherals */ +#define BKPSRAM_BASE 0x40024000U /*!< Base address of : Backup SRAM(4 KB) */ +#define QSPI_BASE 0x90000000U /*!< Base address of : QSPI memories accessible over AXI */ +#define FMC_R_BASE 0xA0000000U /*!< Base address of : FMC Control registers */ +#define QSPI_R_BASE 0xA0001000U /*!< Base address of : QSPI Control registers */ +#define SRAM1_BASE 0x20010000U /*!< Base address of : 176KB RAM1 accessible over AXI/AHB */ +#define SRAM2_BASE 0x2003C000U /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */ +#define FLASH_END 0x0800FFFFU /*!< FLASH end address */ +#define FLASH_OTP_BASE 0x1FF07800U /*!< Base address of : (up to 528 Bytes) embedded FLASH OTP Area */ +#define FLASH_OTP_END 0x1FF07A0FU /*!< End address of : (up to 528 Bytes) embedded FLASH OTP Area */ + +/* Legacy define */ +#define FLASH_BASE FLASHAXI_BASE + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000U) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400U) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800U) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00U) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000U) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400U) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800U) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400U) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800U) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00U) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000U) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400U) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000U) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400U) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800U) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00U) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400U) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000U) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400U) +#define SDMMC2_BASE (APB2PERIPH_BASE + 0x1C00U) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100U) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200U) +#define ADC_BASE (APB2PERIPH_BASE + 0x2300U) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00U) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U) +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U) +#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U) +#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U) +#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000U) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800U) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00U) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004U) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024U) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004U) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024U) +/*!< AHB1 peripherals */ +#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U) +#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U) +#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U) +#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U) +#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400U) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800U) +#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000U) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U) +#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U) +#define UID_BASE 0x1FF07A10U /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE 0x1FF07A22U /*!< FLASH Size register base address */ +#define PACKAGE_BASE 0x1FFF7BF0U /*!< Package size register base address */ +/* Legacy define */ +#define PACKAGESIZE_BASE PACKAGE_BASE + +#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U) +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U) +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U) +/*!< AHB2 peripherals */ +#define AES_BASE (AHB2PERIPH_BASE + 0x60000U) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800U) +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000U) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104U) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080U) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140U) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE 0xE0042000U + +/*!< USB registers base address */ +#define USB_OTG_HS_PERIPH_BASE 0x40040000U +#define USB_OTG_FS_PERIPH_BASE 0x50000000U +#define USB_HS_PHYC_CONTROLLER_BASE 0x40017C00U + +#define USB_OTG_GLOBAL_BASE 0x000U +#define USB_OTG_DEVICE_BASE 0x800U +#define USB_OTG_IN_ENDPOINT_BASE 0x900U +#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U +#define USB_OTG_EP_REG_SIZE 0x20U +#define USB_OTG_HOST_BASE 0x400U +#define USB_OTG_HOST_PORT_BASE 0x440U +#define USB_OTG_HOST_CHANNEL_BASE 0x500U +#define USB_OTG_HOST_CHANNEL_SIZE 0x20U +#define USB_OTG_PCGCCTL_BASE 0xE00U +#define USB_OTG_FIFO_BASE 0x1000U +#define USB_OTG_FIFO_SIZE 0x1000U + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC1 ((DAC_TypeDef *) DAC_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define AES ((AES_TypeDef *) AES_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) +#define USB_HS_PHYC ((USB_HS_PHYC_GlobalTypeDef *) USB_HS_PHYC_CONTROLLER_BASE) +#define SDMMC2 ((SDMMC_TypeDef *) SDMMC2_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1U << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*!
© COPYRIGHT(c) 2016 STMicroelectronics
+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/** @addtogroup CMSIS_Device + * @{ + */ + +/** @addtogroup stm32f750xx + * @{ + */ + +#ifndef __STM32F750xx_H +#define __STM32F750xx_H + +#ifdef __cplusplus + extern "C" { +#endif /* __cplusplus */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief STM32F7xx Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum +{ +/****** Cortex-M7 Processor Exceptions Numbers ****************************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M7 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M7 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M7 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M7 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M7 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M7 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M7 System Tick Interrupt */ +/****** STM32 specific Interrupt Numbers **********************************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMP_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ + RTC_WKUP_IRQn = 3, /*!< RTC Wakeup interrupt through the EXTI line */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Stream0_IRQn = 11, /*!< DMA1 Stream 0 global Interrupt */ + DMA1_Stream1_IRQn = 12, /*!< DMA1 Stream 1 global Interrupt */ + DMA1_Stream2_IRQn = 13, /*!< DMA1 Stream 2 global Interrupt */ + DMA1_Stream3_IRQn = 14, /*!< DMA1 Stream 3 global Interrupt */ + DMA1_Stream4_IRQn = 15, /*!< DMA1 Stream 4 global Interrupt */ + DMA1_Stream5_IRQn = 16, /*!< DMA1 Stream 5 global Interrupt */ + DMA1_Stream6_IRQn = 17, /*!< DMA1 Stream 6 global Interrupt */ + ADC_IRQn = 18, /*!< ADC1, ADC2 and ADC3 global Interrupts */ + CAN1_TX_IRQn = 19, /*!< CAN1 TX Interrupt */ + CAN1_RX0_IRQn = 20, /*!< CAN1 RX0 Interrupt */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_TIM9_IRQn = 24, /*!< TIM1 Break interrupt and TIM9 global interrupt */ + TIM1_UP_TIM10_IRQn = 25, /*!< TIM1 Update Interrupt and TIM10 global interrupt */ + TIM1_TRG_COM_TIM11_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt and TIM11 global interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTC_Alarm_IRQn = 41, /*!< RTC Alarm (A and B) through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS Wakeup through EXTI line interrupt */ + TIM8_BRK_TIM12_IRQn = 43, /*!< TIM8 Break Interrupt and TIM12 global interrupt */ + TIM8_UP_TIM13_IRQn = 44, /*!< TIM8 Update Interrupt and TIM13 global interrupt */ + TIM8_TRG_COM_TIM14_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt and TIM14 global interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + DMA1_Stream7_IRQn = 47, /*!< DMA1 Stream7 Interrupt */ + FMC_IRQn = 48, /*!< FMC global Interrupt */ + SDMMC1_IRQn = 49, /*!< SDMMC1 global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_DAC_IRQn = 54, /*!< TIM6 global and DAC1&2 underrun error interrupts */ + TIM7_IRQn = 55, /*!< TIM7 global interrupt */ + DMA2_Stream0_IRQn = 56, /*!< DMA2 Stream 0 global Interrupt */ + DMA2_Stream1_IRQn = 57, /*!< DMA2 Stream 1 global Interrupt */ + DMA2_Stream2_IRQn = 58, /*!< DMA2 Stream 2 global Interrupt */ + DMA2_Stream3_IRQn = 59, /*!< DMA2 Stream 3 global Interrupt */ + DMA2_Stream4_IRQn = 60, /*!< DMA2 Stream 4 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67, /*!< USB OTG FS global Interrupt */ + DMA2_Stream5_IRQn = 68, /*!< DMA2 Stream 5 global interrupt */ + DMA2_Stream6_IRQn = 69, /*!< DMA2 Stream 6 global interrupt */ + DMA2_Stream7_IRQn = 70, /*!< DMA2 Stream 7 global interrupt */ + USART6_IRQn = 71, /*!< USART6 global interrupt */ + I2C3_EV_IRQn = 72, /*!< I2C3 event interrupt */ + I2C3_ER_IRQn = 73, /*!< I2C3 error interrupt */ + OTG_HS_EP1_OUT_IRQn = 74, /*!< USB OTG HS End Point 1 Out global interrupt */ + OTG_HS_EP1_IN_IRQn = 75, /*!< USB OTG HS End Point 1 In global interrupt */ + OTG_HS_WKUP_IRQn = 76, /*!< USB OTG HS Wakeup through EXTI interrupt */ + OTG_HS_IRQn = 77, /*!< USB OTG HS global interrupt */ + DCMI_IRQn = 78, /*!< DCMI global interrupt */ + CRYP_IRQn = 79, /*!< CRYP crypto global interrupt */ + HASH_RNG_IRQn = 80, /*!< Hash and Rng global interrupt */ + FPU_IRQn = 81, /*!< FPU global interrupt */ + UART7_IRQn = 82, /*!< UART7 global interrupt */ + UART8_IRQn = 83, /*!< UART8 global interrupt */ + SPI4_IRQn = 84, /*!< SPI4 global Interrupt */ + SPI5_IRQn = 85, /*!< SPI5 global Interrupt */ + SPI6_IRQn = 86, /*!< SPI6 global Interrupt */ + SAI1_IRQn = 87, /*!< SAI1 global Interrupt */ + LTDC_IRQn = 88, /*!< LTDC global Interrupt */ + LTDC_ER_IRQn = 89, /*!< LTDC Error global Interrupt */ + DMA2D_IRQn = 90, /*!< DMA2D global Interrupt */ + SAI2_IRQn = 91, /*!< SAI2 global Interrupt */ + QUADSPI_IRQn = 92, /*!< Quad SPI global interrupt */ + LPTIM1_IRQn = 93, /*!< LP TIM1 interrupt */ + CEC_IRQn = 94, /*!< HDMI-CEC global Interrupt */ + I2C4_EV_IRQn = 95, /*!< I2C4 Event Interrupt */ + I2C4_ER_IRQn = 96, /*!< I2C4 Error Interrupt */ + SPDIF_RX_IRQn = 97, /*!< SPDIF-RX global Interrupt */ +} IRQn_Type; + +/** + * @} + */ + +/** + * @brief Configuration of the Cortex-M7 Processor and Core Peripherals + */ +#define __CM7_REV 0x0001U /*!< Cortex-M7 revision r0p1 */ +#define __MPU_PRESENT 1 /*!< CM7 provides an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< CM7 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ +#define __FPU_PRESENT 1 /*!< FPU present */ +#define __ICACHE_PRESENT 1 /*!< CM7 instruction cache present */ +#define __DCACHE_PRESENT 1 /*!< CM7 data cache present */ +#include "core_cm7.h" /*!< Cortex-M7 processor and core peripherals */ + + +#include "system_stm32f7xx.h" +#include + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ + __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ + __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ + __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ + __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x14 */ + __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x18 */ + __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x1C */ + __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x20 */ + __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x24 */ + __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x28 */ + __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x2C */ + __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x30 */ + __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x34 */ + __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x38*/ + __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x3C */ + __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x40 */ + __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x44 */ + __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x48 */ + __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x4C */ +} ADC_TypeDef; + +typedef struct +{ + __IO uint32_t CSR; /*!< ADC Common status register, Address offset: ADC1 base address + 0x300 */ + __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ + __IO uint32_t CDR; /*!< ADC common regular data register for dual + AND triple modes, Address offset: ADC1 base address + 0x308 */ +} ADC_Common_TypeDef; + + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; /*!< CAN TX mailbox identifier register */ + __IO uint32_t TDTR; /*!< CAN mailbox data length control and time stamp register */ + __IO uint32_t TDLR; /*!< CAN mailbox data low register */ + __IO uint32_t TDHR; /*!< CAN mailbox data high register */ +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; /*!< CAN receive FIFO mailbox identifier register */ + __IO uint32_t RDTR; /*!< CAN receive FIFO mailbox data length control and time stamp register */ + __IO uint32_t RDLR; /*!< CAN receive FIFO mailbox data low register */ + __IO uint32_t RDHR; /*!< CAN receive FIFO mailbox data high register */ +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; /*!< CAN Filter bank register 1 */ + __IO uint32_t FR2; /*!< CAN Filter bank register 1 */ +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; /*!< CAN master control register, Address offset: 0x00 */ + __IO uint32_t MSR; /*!< CAN master status register, Address offset: 0x04 */ + __IO uint32_t TSR; /*!< CAN transmit status register, Address offset: 0x08 */ + __IO uint32_t RF0R; /*!< CAN receive FIFO 0 register, Address offset: 0x0C */ + __IO uint32_t RF1R; /*!< CAN receive FIFO 1 register, Address offset: 0x10 */ + __IO uint32_t IER; /*!< CAN interrupt enable register, Address offset: 0x14 */ + __IO uint32_t ESR; /*!< CAN error status register, Address offset: 0x18 */ + __IO uint32_t BTR; /*!< CAN bit timing register, Address offset: 0x1C */ + uint32_t RESERVED0[88]; /*!< Reserved, 0x020 - 0x17F */ + CAN_TxMailBox_TypeDef sTxMailBox[3]; /*!< CAN Tx MailBox, Address offset: 0x180 - 0x1AC */ + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; /*!< CAN FIFO MailBox, Address offset: 0x1B0 - 0x1CC */ + uint32_t RESERVED1[12]; /*!< Reserved, 0x1D0 - 0x1FF */ + __IO uint32_t FMR; /*!< CAN filter master register, Address offset: 0x200 */ + __IO uint32_t FM1R; /*!< CAN filter mode register, Address offset: 0x204 */ + uint32_t RESERVED2; /*!< Reserved, 0x208 */ + __IO uint32_t FS1R; /*!< CAN filter scale register, Address offset: 0x20C */ + uint32_t RESERVED3; /*!< Reserved, 0x210 */ + __IO uint32_t FFA1R; /*!< CAN filter FIFO assignment register, Address offset: 0x214 */ + uint32_t RESERVED4; /*!< Reserved, 0x218 */ + __IO uint32_t FA1R; /*!< CAN filter activation register, Address offset: 0x21C */ + uint32_t RESERVED5[8]; /*!< Reserved, 0x220-0x23F */ + CAN_FilterRegister_TypeDef sFilterRegister[28]; /*!< CAN Filter Register, Address offset: 0x240-0x31C */ +} CAN_TypeDef; + +/** + * @brief HDMI-CEC + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CEC control register, Address offset:0x00 */ + __IO uint32_t CFGR; /*!< CEC configuration register, Address offset:0x04 */ + __IO uint32_t TXDR; /*!< CEC Tx data register , Address offset:0x08 */ + __IO uint32_t RXDR; /*!< CEC Rx Data Register, Address offset:0x0C */ + __IO uint32_t ISR; /*!< CEC Interrupt and Status Register, Address offset:0x10 */ + __IO uint32_t IER; /*!< CEC interrupt enable register, Address offset:0x14 */ +}CEC_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ + __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ + uint8_t RESERVED0; /*!< Reserved, 0x05 */ + uint16_t RESERVED1; /*!< Reserved, 0x06 */ + __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ + uint32_t RESERVED2; /*!< Reserved, 0x0C */ + __IO uint32_t INIT; /*!< Initial CRC value register, Address offset: 0x10 */ + __IO uint32_t POL; /*!< CRC polynomial register, Address offset: 0x14 */ +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ + __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ + __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ + __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ + __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ + __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ + __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ + __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ + __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ + __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ + __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ + __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ + __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ + __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ +} DAC_TypeDef; + + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ + __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ + __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ + __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ +}DBGMCU_TypeDef; + +/** + * @brief DCMI + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DCMI control register 1, Address offset: 0x00 */ + __IO uint32_t SR; /*!< DCMI status register, Address offset: 0x04 */ + __IO uint32_t RISR; /*!< DCMI raw interrupt status register, Address offset: 0x08 */ + __IO uint32_t IER; /*!< DCMI interrupt enable register, Address offset: 0x0C */ + __IO uint32_t MISR; /*!< DCMI masked interrupt status register, Address offset: 0x10 */ + __IO uint32_t ICR; /*!< DCMI interrupt clear register, Address offset: 0x14 */ + __IO uint32_t ESCR; /*!< DCMI embedded synchronization code register, Address offset: 0x18 */ + __IO uint32_t ESUR; /*!< DCMI embedded synchronization unmask register, Address offset: 0x1C */ + __IO uint32_t CWSTRTR; /*!< DCMI crop window start, Address offset: 0x20 */ + __IO uint32_t CWSIZER; /*!< DCMI crop window size, Address offset: 0x24 */ + __IO uint32_t DR; /*!< DCMI data register, Address offset: 0x28 */ +} DCMI_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA stream x configuration register */ + __IO uint32_t NDTR; /*!< DMA stream x number of data register */ + __IO uint32_t PAR; /*!< DMA stream x peripheral address register */ + __IO uint32_t M0AR; /*!< DMA stream x memory 0 address register */ + __IO uint32_t M1AR; /*!< DMA stream x memory 1 address register */ + __IO uint32_t FCR; /*!< DMA stream x FIFO control register */ +} DMA_Stream_TypeDef; + +typedef struct +{ + __IO uint32_t LISR; /*!< DMA low interrupt status register, Address offset: 0x00 */ + __IO uint32_t HISR; /*!< DMA high interrupt status register, Address offset: 0x04 */ + __IO uint32_t LIFCR; /*!< DMA low interrupt flag clear register, Address offset: 0x08 */ + __IO uint32_t HIFCR; /*!< DMA high interrupt flag clear register, Address offset: 0x0C */ +} DMA_TypeDef; + +/** + * @brief DMA2D Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< DMA2D Control Register, Address offset: 0x00 */ + __IO uint32_t ISR; /*!< DMA2D Interrupt Status Register, Address offset: 0x04 */ + __IO uint32_t IFCR; /*!< DMA2D Interrupt Flag Clear Register, Address offset: 0x08 */ + __IO uint32_t FGMAR; /*!< DMA2D Foreground Memory Address Register, Address offset: 0x0C */ + __IO uint32_t FGOR; /*!< DMA2D Foreground Offset Register, Address offset: 0x10 */ + __IO uint32_t BGMAR; /*!< DMA2D Background Memory Address Register, Address offset: 0x14 */ + __IO uint32_t BGOR; /*!< DMA2D Background Offset Register, Address offset: 0x18 */ + __IO uint32_t FGPFCCR; /*!< DMA2D Foreground PFC Control Register, Address offset: 0x1C */ + __IO uint32_t FGCOLR; /*!< DMA2D Foreground Color Register, Address offset: 0x20 */ + __IO uint32_t BGPFCCR; /*!< DMA2D Background PFC Control Register, Address offset: 0x24 */ + __IO uint32_t BGCOLR; /*!< DMA2D Background Color Register, Address offset: 0x28 */ + __IO uint32_t FGCMAR; /*!< DMA2D Foreground CLUT Memory Address Register, Address offset: 0x2C */ + __IO uint32_t BGCMAR; /*!< DMA2D Background CLUT Memory Address Register, Address offset: 0x30 */ + __IO uint32_t OPFCCR; /*!< DMA2D Output PFC Control Register, Address offset: 0x34 */ + __IO uint32_t OCOLR; /*!< DMA2D Output Color Register, Address offset: 0x38 */ + __IO uint32_t OMAR; /*!< DMA2D Output Memory Address Register, Address offset: 0x3C */ + __IO uint32_t OOR; /*!< DMA2D Output Offset Register, Address offset: 0x40 */ + __IO uint32_t NLR; /*!< DMA2D Number of Line Register, Address offset: 0x44 */ + __IO uint32_t LWR; /*!< DMA2D Line Watermark Register, Address offset: 0x48 */ + __IO uint32_t AMTCR; /*!< DMA2D AHB Master Timer Configuration Register, Address offset: 0x4C */ + uint32_t RESERVED[236]; /*!< Reserved, 0x50-0x3FF */ + __IO uint32_t FGCLUT[256]; /*!< DMA2D Foreground CLUT, Address offset:400-7FF */ + __IO uint32_t BGCLUT[256]; /*!< DMA2D Background CLUT, Address offset:800-BFF */ +} DMA2D_TypeDef; + + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1; + __IO uint32_t MACDBGR; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + __IO uint32_t RESERVED8; + __IO uint32_t PTPTSSR; + uint32_t RESERVED9[565]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + __IO uint32_t DMARSWTR; + uint32_t RESERVED10[8]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; /*!< EXTI Interrupt mask register, Address offset: 0x00 */ + __IO uint32_t EMR; /*!< EXTI Event mask register, Address offset: 0x04 */ + __IO uint32_t RTSR; /*!< EXTI Rising trigger selection register, Address offset: 0x08 */ + __IO uint32_t FTSR; /*!< EXTI Falling trigger selection register, Address offset: 0x0C */ + __IO uint32_t SWIER; /*!< EXTI Software interrupt event register, Address offset: 0x10 */ + __IO uint32_t PR; /*!< EXTI Pending register, Address offset: 0x14 */ +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; /*!< FLASH access control register, Address offset: 0x00 */ + __IO uint32_t KEYR; /*!< FLASH key register, Address offset: 0x04 */ + __IO uint32_t OPTKEYR; /*!< FLASH option key register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< FLASH status register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< FLASH control register, Address offset: 0x10 */ + __IO uint32_t OPTCR; /*!< FLASH option control register , Address offset: 0x14 */ + __IO uint32_t OPTCR1; /*!< FLASH option control register 1 , Address offset: 0x18 */ +} FLASH_TypeDef; + + + +/** + * @brief Flexible Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */ +} FMC_Bank1_TypeDef; + +/** + * @brief Flexible Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */ +} FMC_Bank1E_TypeDef; + +/** + * @brief Flexible Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR; /*!< NAND Flash control register, Address offset: 0x80 */ + __IO uint32_t SR; /*!< NAND Flash FIFO status and interrupt register, Address offset: 0x84 */ + __IO uint32_t PMEM; /*!< NAND Flash Common memory space timing register, Address offset: 0x88 */ + __IO uint32_t PATT; /*!< NAND Flash Attribute memory space timing register, Address offset: 0x8C */ + uint32_t RESERVED0; /*!< Reserved, 0x90 */ + __IO uint32_t ECCR; /*!< NAND Flash ECC result registers, Address offset: 0x94 */ +} FMC_Bank3_TypeDef; + +/** + * @brief Flexible Memory Controller Bank5_6 + */ + +typedef struct +{ + __IO uint32_t SDCR[2]; /*!< SDRAM Control registers , Address offset: 0x140-0x144 */ + __IO uint32_t SDTR[2]; /*!< SDRAM Timing registers , Address offset: 0x148-0x14C */ + __IO uint32_t SDCMR; /*!< SDRAM Command Mode register, Address offset: 0x150 */ + __IO uint32_t SDRTR; /*!< SDRAM Refresh Timer register, Address offset: 0x154 */ + __IO uint32_t SDSR; /*!< SDRAM Status register, Address offset: 0x158 */ +} FMC_Bank5_6_TypeDef; + + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ + __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ + __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ + __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ + __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ + __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ + __IO uint32_t BSRR; /*!< GPIO port bit set/reset register, Address offset: 0x18 */ + __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ + __IO uint32_t AFR[2]; /*!< GPIO alternate function registers, Address offset: 0x20-0x24 */ +} GPIO_TypeDef; + +/** + * @brief System configuration controller + */ + +typedef struct +{ + __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ + __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ + __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ + uint32_t RESERVED[2]; /*!< Reserved, 0x18-0x1C */ + __IO uint32_t CMPCR; /*!< SYSCFG Compensation cell control register, Address offset: 0x20 */ +} SYSCFG_TypeDef; + +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ + __IO uint32_t OAR1; /*!< I2C Own address 1 register, Address offset: 0x08 */ + __IO uint32_t OAR2; /*!< I2C Own address 2 register, Address offset: 0x0C */ + __IO uint32_t TIMINGR; /*!< I2C Timing register, Address offset: 0x10 */ + __IO uint32_t TIMEOUTR; /*!< I2C Timeout register, Address offset: 0x14 */ + __IO uint32_t ISR; /*!< I2C Interrupt and status register, Address offset: 0x18 */ + __IO uint32_t ICR; /*!< I2C Interrupt clear register, Address offset: 0x1C */ + __IO uint32_t PECR; /*!< I2C PEC register, Address offset: 0x20 */ + __IO uint32_t RXDR; /*!< I2C Receive data register, Address offset: 0x24 */ + __IO uint32_t TXDR; /*!< I2C Transmit data register, Address offset: 0x28 */ +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; /*!< IWDG Key register, Address offset: 0x00 */ + __IO uint32_t PR; /*!< IWDG Prescaler register, Address offset: 0x04 */ + __IO uint32_t RLR; /*!< IWDG Reload register, Address offset: 0x08 */ + __IO uint32_t SR; /*!< IWDG Status register, Address offset: 0x0C */ + __IO uint32_t WINR; /*!< IWDG Window register, Address offset: 0x10 */ +} IWDG_TypeDef; + + +/** + * @brief LCD-TFT Display Controller + */ + +typedef struct +{ + uint32_t RESERVED0[2]; /*!< Reserved, 0x00-0x04 */ + __IO uint32_t SSCR; /*!< LTDC Synchronization Size Configuration Register, Address offset: 0x08 */ + __IO uint32_t BPCR; /*!< LTDC Back Porch Configuration Register, Address offset: 0x0C */ + __IO uint32_t AWCR; /*!< LTDC Active Width Configuration Register, Address offset: 0x10 */ + __IO uint32_t TWCR; /*!< LTDC Total Width Configuration Register, Address offset: 0x14 */ + __IO uint32_t GCR; /*!< LTDC Global Control Register, Address offset: 0x18 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x1C-0x20 */ + __IO uint32_t SRCR; /*!< LTDC Shadow Reload Configuration Register, Address offset: 0x24 */ + uint32_t RESERVED2[1]; /*!< Reserved, 0x28 */ + __IO uint32_t BCCR; /*!< LTDC Background Color Configuration Register, Address offset: 0x2C */ + uint32_t RESERVED3[1]; /*!< Reserved, 0x30 */ + __IO uint32_t IER; /*!< LTDC Interrupt Enable Register, Address offset: 0x34 */ + __IO uint32_t ISR; /*!< LTDC Interrupt Status Register, Address offset: 0x38 */ + __IO uint32_t ICR; /*!< LTDC Interrupt Clear Register, Address offset: 0x3C */ + __IO uint32_t LIPCR; /*!< LTDC Line Interrupt Position Configuration Register, Address offset: 0x40 */ + __IO uint32_t CPSR; /*!< LTDC Current Position Status Register, Address offset: 0x44 */ + __IO uint32_t CDSR; /*!< LTDC Current Display Status Register, Address offset: 0x48 */ +} LTDC_TypeDef; + +/** + * @brief LCD-TFT Display layer x Controller + */ + +typedef struct +{ + __IO uint32_t CR; /*!< LTDC Layerx Control Register Address offset: 0x84 */ + __IO uint32_t WHPCR; /*!< LTDC Layerx Window Horizontal Position Configuration Register Address offset: 0x88 */ + __IO uint32_t WVPCR; /*!< LTDC Layerx Window Vertical Position Configuration Register Address offset: 0x8C */ + __IO uint32_t CKCR; /*!< LTDC Layerx Color Keying Configuration Register Address offset: 0x90 */ + __IO uint32_t PFCR; /*!< LTDC Layerx Pixel Format Configuration Register Address offset: 0x94 */ + __IO uint32_t CACR; /*!< LTDC Layerx Constant Alpha Configuration Register Address offset: 0x98 */ + __IO uint32_t DCCR; /*!< LTDC Layerx Default Color Configuration Register Address offset: 0x9C */ + __IO uint32_t BFCR; /*!< LTDC Layerx Blending Factors Configuration Register Address offset: 0xA0 */ + uint32_t RESERVED0[2]; /*!< Reserved */ + __IO uint32_t CFBAR; /*!< LTDC Layerx Color Frame Buffer Address Register Address offset: 0xAC */ + __IO uint32_t CFBLR; /*!< LTDC Layerx Color Frame Buffer Length Register Address offset: 0xB0 */ + __IO uint32_t CFBLNR; /*!< LTDC Layerx ColorFrame Buffer Line Number Register Address offset: 0xB4 */ + uint32_t RESERVED1[3]; /*!< Reserved */ + __IO uint32_t CLUTWR; /*!< LTDC Layerx CLUT Write Register Address offset: 0x144 */ + +} LTDC_Layer_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< PWR power control register 1, Address offset: 0x00 */ + __IO uint32_t CSR1; /*!< PWR power control/status register 2, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< PWR power control register 2, Address offset: 0x08 */ + __IO uint32_t CSR2; /*!< PWR power control/status register 2, Address offset: 0x0C */ +} PWR_TypeDef; + + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ + __IO uint32_t PLLCFGR; /*!< RCC PLL configuration register, Address offset: 0x04 */ + __IO uint32_t CFGR; /*!< RCC clock configuration register, Address offset: 0x08 */ + __IO uint32_t CIR; /*!< RCC clock interrupt register, Address offset: 0x0C */ + __IO uint32_t AHB1RSTR; /*!< RCC AHB1 peripheral reset register, Address offset: 0x10 */ + __IO uint32_t AHB2RSTR; /*!< RCC AHB2 peripheral reset register, Address offset: 0x14 */ + __IO uint32_t AHB3RSTR; /*!< RCC AHB3 peripheral reset register, Address offset: 0x18 */ + uint32_t RESERVED0; /*!< Reserved, 0x1C */ + __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x20 */ + __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x24 */ + uint32_t RESERVED1[2]; /*!< Reserved, 0x28-0x2C */ + __IO uint32_t AHB1ENR; /*!< RCC AHB1 peripheral clock register, Address offset: 0x30 */ + __IO uint32_t AHB2ENR; /*!< RCC AHB2 peripheral clock register, Address offset: 0x34 */ + __IO uint32_t AHB3ENR; /*!< RCC AHB3 peripheral clock register, Address offset: 0x38 */ + uint32_t RESERVED2; /*!< Reserved, 0x3C */ + __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x40 */ + __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x44 */ + uint32_t RESERVED3[2]; /*!< Reserved, 0x48-0x4C */ + __IO uint32_t AHB1LPENR; /*!< RCC AHB1 peripheral clock enable in low power mode register, Address offset: 0x50 */ + __IO uint32_t AHB2LPENR; /*!< RCC AHB2 peripheral clock enable in low power mode register, Address offset: 0x54 */ + __IO uint32_t AHB3LPENR; /*!< RCC AHB3 peripheral clock enable in low power mode register, Address offset: 0x58 */ + uint32_t RESERVED4; /*!< Reserved, 0x5C */ + __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x60 */ + __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x64 */ + uint32_t RESERVED5[2]; /*!< Reserved, 0x68-0x6C */ + __IO uint32_t BDCR; /*!< RCC Backup domain control register, Address offset: 0x70 */ + __IO uint32_t CSR; /*!< RCC clock control & status register, Address offset: 0x74 */ + uint32_t RESERVED6[2]; /*!< Reserved, 0x78-0x7C */ + __IO uint32_t SSCGR; /*!< RCC spread spectrum clock generation register, Address offset: 0x80 */ + __IO uint32_t PLLI2SCFGR; /*!< RCC PLLI2S configuration register, Address offset: 0x84 */ + __IO uint32_t PLLSAICFGR; /*!< RCC PLLSAI configuration register, Address offset: 0x88 */ + __IO uint32_t DCKCFGR1; /*!< RCC Dedicated Clocks configuration register1, Address offset: 0x8C */ + __IO uint32_t DCKCFGR2; /*!< RCC Dedicated Clocks configuration register 2, Address offset: 0x90 */ + +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ + __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ + __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ + __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ + __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ + __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ + uint32_t reserved; /*!< Reserved */ + __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ + __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ + __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ + __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ + __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ + __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ + __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ + __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ + __IO uint32_t CALR; /*!< RTC calibration register, Address offset: 0x3C */ + __IO uint32_t TAMPCR; /*!< RTC tamper configuration register, Address offset: 0x40 */ + __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ + __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ + __IO uint32_t OR; /*!< RTC option register, Address offset: 0x4C */ + __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ + __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ + __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ + __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ + __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ + __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ + __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ + __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ + __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ + __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ + __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ + __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ + __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ + __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ + __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ + __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ + __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ + __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ + __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ + __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ + __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ + __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ + __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ + __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ + __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ + __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ + __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ + __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ + __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ + __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ + __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ + __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ +} RTC_TypeDef; + + +/** + * @brief Serial Audio Interface + */ + +typedef struct +{ + __IO uint32_t GCR; /*!< SAI global configuration register, Address offset: 0x00 */ +} SAI_TypeDef; + +typedef struct +{ + __IO uint32_t CR1; /*!< SAI block x configuration register 1, Address offset: 0x04 */ + __IO uint32_t CR2; /*!< SAI block x configuration register 2, Address offset: 0x08 */ + __IO uint32_t FRCR; /*!< SAI block x frame configuration register, Address offset: 0x0C */ + __IO uint32_t SLOTR; /*!< SAI block x slot register, Address offset: 0x10 */ + __IO uint32_t IMR; /*!< SAI block x interrupt mask register, Address offset: 0x14 */ + __IO uint32_t SR; /*!< SAI block x status register, Address offset: 0x18 */ + __IO uint32_t CLRFR; /*!< SAI block x clear flag register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< SAI block x data register, Address offset: 0x20 */ +} SAI_Block_TypeDef; + +/** + * @brief SPDIF-RX Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< Control register, Address offset: 0x00 */ + __IO uint32_t IMR; /*!< Interrupt mask register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< Status register, Address offset: 0x08 */ + __IO uint32_t IFCR; /*!< Interrupt Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DR; /*!< Data input register, Address offset: 0x10 */ + __IO uint32_t CSR; /*!< Channel Status register, Address offset: 0x14 */ + __IO uint32_t DIR; /*!< Debug Information register, Address offset: 0x18 */ +} SPDIFRX_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; /*!< SDMMC power control register, Address offset: 0x00 */ + __IO uint32_t CLKCR; /*!< SDMMClock control register, Address offset: 0x04 */ + __IO uint32_t ARG; /*!< SDMMC argument register, Address offset: 0x08 */ + __IO uint32_t CMD; /*!< SDMMC command register, Address offset: 0x0C */ + __I uint32_t RESPCMD; /*!< SDMMC command response register, Address offset: 0x10 */ + __I uint32_t RESP1; /*!< SDMMC response 1 register, Address offset: 0x14 */ + __I uint32_t RESP2; /*!< SDMMC response 2 register, Address offset: 0x18 */ + __I uint32_t RESP3; /*!< SDMMC response 3 register, Address offset: 0x1C */ + __I uint32_t RESP4; /*!< SDMMC response 4 register, Address offset: 0x20 */ + __IO uint32_t DTIMER; /*!< SDMMC data timer register, Address offset: 0x24 */ + __IO uint32_t DLEN; /*!< SDMMC data length register, Address offset: 0x28 */ + __IO uint32_t DCTRL; /*!< SDMMC data control register, Address offset: 0x2C */ + __I uint32_t DCOUNT; /*!< SDMMC data counter register, Address offset: 0x30 */ + __I uint32_t STA; /*!< SDMMC status register, Address offset: 0x34 */ + __IO uint32_t ICR; /*!< SDMMC interrupt clear register, Address offset: 0x38 */ + __IO uint32_t MASK; /*!< SDMMC mask register, Address offset: 0x3C */ + uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */ + __I uint32_t FIFOCNT; /*!< SDMMC FIFO counter register, Address offset: 0x48 */ + uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */ + __IO uint32_t FIFO; /*!< SDMMC data FIFO register, Address offset: 0x80 */ +} SDMMC_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */ + __IO uint32_t CR2; /*!< SPI control register 2, Address offset: 0x04 */ + __IO uint32_t SR; /*!< SPI status register, Address offset: 0x08 */ + __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ + __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ + __IO uint32_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */ + __IO uint32_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */ + __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ + __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ +} SPI_TypeDef; + +/** + * @brief QUAD Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint32_t CR; /*!< QUADSPI Control register, Address offset: 0x00 */ + __IO uint32_t DCR; /*!< QUADSPI Device Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< QUADSPI Status register, Address offset: 0x08 */ + __IO uint32_t FCR; /*!< QUADSPI Flag Clear register, Address offset: 0x0C */ + __IO uint32_t DLR; /*!< QUADSPI Data Length register, Address offset: 0x10 */ + __IO uint32_t CCR; /*!< QUADSPI Communication Configuration register, Address offset: 0x14 */ + __IO uint32_t AR; /*!< QUADSPI Address register, Address offset: 0x18 */ + __IO uint32_t ABR; /*!< QUADSPI Alternate Bytes register, Address offset: 0x1C */ + __IO uint32_t DR; /*!< QUADSPI Data register, Address offset: 0x20 */ + __IO uint32_t PSMKR; /*!< QUADSPI Polling Status Mask register, Address offset: 0x24 */ + __IO uint32_t PSMAR; /*!< QUADSPI Polling Status Match register, Address offset: 0x28 */ + __IO uint32_t PIR; /*!< QUADSPI Polling Interval register, Address offset: 0x2C */ + __IO uint32_t LPTR; /*!< QUADSPI Low Power Timeout register, Address offset: 0x30 */ +} QUADSPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ + __IO uint32_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */ + __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ + __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ + __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ + __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ + __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ + __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ + __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ + __IO uint32_t PSC; /*!< TIM prescaler, Address offset: 0x28 */ + __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ + __IO uint32_t RCR; /*!< TIM repetition counter register, Address offset: 0x30 */ + __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ + __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ + __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ + __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ + __IO uint32_t BDTR; /*!< TIM break and dead-time register, Address offset: 0x44 */ + __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ + __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ + __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ + __IO uint32_t CCMR3; /*!< TIM capture/compare mode register 3, Address offset: 0x54 */ + __IO uint32_t CCR5; /*!< TIM capture/compare mode register5, Address offset: 0x58 */ + __IO uint32_t CCR6; /*!< TIM capture/compare mode register6, Address offset: 0x5C */ + +} TIM_TypeDef; + +/** + * @brief LPTIMIMER + */ +typedef struct +{ + __IO uint32_t ISR; /*!< LPTIM Interrupt and Status register, Address offset: 0x00 */ + __IO uint32_t ICR; /*!< LPTIM Interrupt Clear register, Address offset: 0x04 */ + __IO uint32_t IER; /*!< LPTIM Interrupt Enable register, Address offset: 0x08 */ + __IO uint32_t CFGR; /*!< LPTIM Configuration register, Address offset: 0x0C */ + __IO uint32_t CR; /*!< LPTIM Control register, Address offset: 0x10 */ + __IO uint32_t CMP; /*!< LPTIM Compare register, Address offset: 0x14 */ + __IO uint32_t ARR; /*!< LPTIM Autoreload register, Address offset: 0x18 */ + __IO uint32_t CNT; /*!< LPTIM Counter register, Address offset: 0x1C */ +} LPTIM_TypeDef; + + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x00 */ + __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x04 */ + __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x08 */ + __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x0C */ + __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x10 */ + __IO uint32_t RTOR; /*!< USART Receiver Time Out register, Address offset: 0x14 */ + __IO uint32_t RQR; /*!< USART Request register, Address offset: 0x18 */ + __IO uint32_t ISR; /*!< USART Interrupt and status register, Address offset: 0x1C */ + __IO uint32_t ICR; /*!< USART Interrupt flag Clear register, Address offset: 0x20 */ + __IO uint32_t RDR; /*!< USART Receive Data register, Address offset: 0x24 */ + __IO uint32_t TDR; /*!< USART Transmit Data register, Address offset: 0x28 */ +} USART_TypeDef; + + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ + __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ + __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ +} WWDG_TypeDef; + +/** + * @brief Crypto Processor + */ + +typedef struct +{ + __IO uint32_t CR; /*!< CRYP control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< CRYP status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< CRYP data input register, Address offset: 0x08 */ + __IO uint32_t DOUT; /*!< CRYP data output register, Address offset: 0x0C */ + __IO uint32_t DMACR; /*!< CRYP DMA control register, Address offset: 0x10 */ + __IO uint32_t IMSCR; /*!< CRYP interrupt mask set/clear register, Address offset: 0x14 */ + __IO uint32_t RISR; /*!< CRYP raw interrupt status register, Address offset: 0x18 */ + __IO uint32_t MISR; /*!< CRYP masked interrupt status register, Address offset: 0x1C */ + __IO uint32_t K0LR; /*!< CRYP key left register 0, Address offset: 0x20 */ + __IO uint32_t K0RR; /*!< CRYP key right register 0, Address offset: 0x24 */ + __IO uint32_t K1LR; /*!< CRYP key left register 1, Address offset: 0x28 */ + __IO uint32_t K1RR; /*!< CRYP key right register 1, Address offset: 0x2C */ + __IO uint32_t K2LR; /*!< CRYP key left register 2, Address offset: 0x30 */ + __IO uint32_t K2RR; /*!< CRYP key right register 2, Address offset: 0x34 */ + __IO uint32_t K3LR; /*!< CRYP key left register 3, Address offset: 0x38 */ + __IO uint32_t K3RR; /*!< CRYP key right register 3, Address offset: 0x3C */ + __IO uint32_t IV0LR; /*!< CRYP initialization vector left-word register 0, Address offset: 0x40 */ + __IO uint32_t IV0RR; /*!< CRYP initialization vector right-word register 0, Address offset: 0x44 */ + __IO uint32_t IV1LR; /*!< CRYP initialization vector left-word register 1, Address offset: 0x48 */ + __IO uint32_t IV1RR; /*!< CRYP initialization vector right-word register 1, Address offset: 0x4C */ + __IO uint32_t CSGCMCCM0R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 0, Address offset: 0x50 */ + __IO uint32_t CSGCMCCM1R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 1, Address offset: 0x54 */ + __IO uint32_t CSGCMCCM2R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 2, Address offset: 0x58 */ + __IO uint32_t CSGCMCCM3R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 3, Address offset: 0x5C */ + __IO uint32_t CSGCMCCM4R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 4, Address offset: 0x60 */ + __IO uint32_t CSGCMCCM5R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 5, Address offset: 0x64 */ + __IO uint32_t CSGCMCCM6R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 6, Address offset: 0x68 */ + __IO uint32_t CSGCMCCM7R; /*!< CRYP GCM/GMAC or CCM/CMAC context swap register 7, Address offset: 0x6C */ + __IO uint32_t CSGCM0R; /*!< CRYP GCM/GMAC context swap register 0, Address offset: 0x70 */ + __IO uint32_t CSGCM1R; /*!< CRYP GCM/GMAC context swap register 1, Address offset: 0x74 */ + __IO uint32_t CSGCM2R; /*!< CRYP GCM/GMAC context swap register 2, Address offset: 0x78 */ + __IO uint32_t CSGCM3R; /*!< CRYP GCM/GMAC context swap register 3, Address offset: 0x7C */ + __IO uint32_t CSGCM4R; /*!< CRYP GCM/GMAC context swap register 4, Address offset: 0x80 */ + __IO uint32_t CSGCM5R; /*!< CRYP GCM/GMAC context swap register 5, Address offset: 0x84 */ + __IO uint32_t CSGCM6R; /*!< CRYP GCM/GMAC context swap register 6, Address offset: 0x88 */ + __IO uint32_t CSGCM7R; /*!< CRYP GCM/GMAC context swap register 7, Address offset: 0x8C */ +} CRYP_TypeDef; + +/** + * @brief HASH + */ + +typedef struct +{ + __IO uint32_t CR; /*!< HASH control register, Address offset: 0x00 */ + __IO uint32_t DIN; /*!< HASH data input register, Address offset: 0x04 */ + __IO uint32_t STR; /*!< HASH start register, Address offset: 0x08 */ + __IO uint32_t HR[5]; /*!< HASH digest registers, Address offset: 0x0C-0x1C */ + __IO uint32_t IMR; /*!< HASH interrupt enable register, Address offset: 0x20 */ + __IO uint32_t SR; /*!< HASH status register, Address offset: 0x24 */ + uint32_t RESERVED[52]; /*!< Reserved, 0x28-0xF4 */ + __IO uint32_t CSR[54]; /*!< HASH context swap registers, Address offset: 0x0F8-0x1CC */ +} HASH_TypeDef; + +/** + * @brief HASH_DIGEST + */ + +typedef struct +{ + __IO uint32_t HR[8]; /*!< HASH digest registers, Address offset: 0x310-0x32C */ +} HASH_DIGEST_TypeDef; + +/** + * @brief RNG + */ + +typedef struct +{ + __IO uint32_t CR; /*!< RNG control register, Address offset: 0x00 */ + __IO uint32_t SR; /*!< RNG status register, Address offset: 0x04 */ + __IO uint32_t DR; /*!< RNG data register, Address offset: 0x08 */ +} RNG_TypeDef; + +/** + * @} + */ + +/** + * @brief USB_OTG_Core_Registers + */ +typedef struct +{ + __IO uint32_t GOTGCTL; /*!< USB_OTG Control and Status Register 000h */ + __IO uint32_t GOTGINT; /*!< USB_OTG Interrupt Register 004h */ + __IO uint32_t GAHBCFG; /*!< Core AHB Configuration Register 008h */ + __IO uint32_t GUSBCFG; /*!< Core USB Configuration Register 00Ch */ + __IO uint32_t GRSTCTL; /*!< Core Reset Register 010h */ + __IO uint32_t GINTSTS; /*!< Core Interrupt Register 014h */ + __IO uint32_t GINTMSK; /*!< Core Interrupt Mask Register 018h */ + __IO uint32_t GRXSTSR; /*!< Receive Sts Q Read Register 01Ch */ + __IO uint32_t GRXSTSP; /*!< Receive Sts Q Read & POP Register 020h */ + __IO uint32_t GRXFSIZ; /*!< Receive FIFO Size Register 024h */ + __IO uint32_t DIEPTXF0_HNPTXFSIZ; /*!< EP0 / Non Periodic Tx FIFO Size Register 028h */ + __IO uint32_t HNPTXSTS; /*!< Non Periodic Tx FIFO/Queue Sts reg 02Ch */ + uint32_t Reserved30[2]; /*!< Reserved 030h */ + __IO uint32_t GCCFG; /*!< General Purpose IO Register 038h */ + __IO uint32_t CID; /*!< User ID Register 03Ch */ + uint32_t Reserved5[3]; /*!< Reserved 040h-048h */ + __IO uint32_t GHWCFG3; /*!< User HW config3 04Ch */ + uint32_t Reserved6; /*!< Reserved 050h */ + __IO uint32_t GLPMCFG; /*!< LPM Register 054h */ + __IO uint32_t GPWRDN; /*!< Power Down Register 058h */ + __IO uint32_t GDFIFOCFG; /*!< DFIFO Software Config Register 05Ch */ + __IO uint32_t GADPCTL; /*!< ADP Timer, Control and Status Register 60Ch */ + uint32_t Reserved43[39]; /*!< Reserved 058h-0FFh */ + __IO uint32_t HPTXFSIZ; /*!< Host Periodic Tx FIFO Size Reg 100h */ + __IO uint32_t DIEPTXF[0x0F]; /*!< dev Periodic Transmit FIFO */ +} USB_OTG_GlobalTypeDef; + + +/** + * @brief USB_OTG_device_Registers + */ +typedef struct +{ + __IO uint32_t DCFG; /*!< dev Configuration Register 800h */ + __IO uint32_t DCTL; /*!< dev Control Register 804h */ + __IO uint32_t DSTS; /*!< dev Status Register (RO) 808h */ + uint32_t Reserved0C; /*!< Reserved 80Ch */ + __IO uint32_t DIEPMSK; /*!< dev IN Endpoint Mask 810h */ + __IO uint32_t DOEPMSK; /*!< dev OUT Endpoint Mask 814h */ + __IO uint32_t DAINT; /*!< dev All Endpoints Itr Reg 818h */ + __IO uint32_t DAINTMSK; /*!< dev All Endpoints Itr Mask 81Ch */ + uint32_t Reserved20; /*!< Reserved 820h */ + uint32_t Reserved9; /*!< Reserved 824h */ + __IO uint32_t DVBUSDIS; /*!< dev VBUS discharge Register 828h */ + __IO uint32_t DVBUSPULSE; /*!< dev VBUS Pulse Register 82Ch */ + __IO uint32_t DTHRCTL; /*!< dev threshold 830h */ + __IO uint32_t DIEPEMPMSK; /*!< dev empty msk 834h */ + __IO uint32_t DEACHINT; /*!< dedicated EP interrupt 838h */ + __IO uint32_t DEACHMSK; /*!< dedicated EP msk 83Ch */ + uint32_t Reserved40; /*!< dedicated EP mask 840h */ + __IO uint32_t DINEP1MSK; /*!< dedicated EP mask 844h */ + uint32_t Reserved44[15]; /*!< Reserved 844-87Ch */ + __IO uint32_t DOUTEP1MSK; /*!< dedicated EP msk 884h */ +} USB_OTG_DeviceTypeDef; + + +/** + * @brief USB_OTG_IN_Endpoint-Specific_Register + */ +typedef struct +{ + __IO uint32_t DIEPCTL; /*!< dev IN Endpoint Control Reg 900h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved 900h + (ep_num * 20h) + 04h */ + __IO uint32_t DIEPINT; /*!< dev IN Endpoint Itr Reg 900h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved 900h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DIEPTSIZ; /*!< IN Endpoint Txfer Size 900h + (ep_num * 20h) + 10h */ + __IO uint32_t DIEPDMA; /*!< IN Endpoint DMA Address Reg 900h + (ep_num * 20h) + 14h */ + __IO uint32_t DTXFSTS; /*!< IN Endpoint Tx FIFO Status Reg 900h + (ep_num * 20h) + 18h */ + uint32_t Reserved18; /*!< Reserved 900h+(ep_num*20h)+1Ch-900h+ (ep_num * 20h) + 1Ch */ +} USB_OTG_INEndpointTypeDef; + + +/** + * @brief USB_OTG_OUT_Endpoint-Specific_Registers + */ +typedef struct +{ + __IO uint32_t DOEPCTL; /*!< dev OUT Endpoint Control Reg B00h + (ep_num * 20h) + 00h */ + uint32_t Reserved04; /*!< Reserved B00h + (ep_num * 20h) + 04h */ + __IO uint32_t DOEPINT; /*!< dev OUT Endpoint Itr Reg B00h + (ep_num * 20h) + 08h */ + uint32_t Reserved0C; /*!< Reserved B00h + (ep_num * 20h) + 0Ch */ + __IO uint32_t DOEPTSIZ; /*!< dev OUT Endpoint Txfer Size B00h + (ep_num * 20h) + 10h */ + __IO uint32_t DOEPDMA; /*!< dev OUT Endpoint DMA Address B00h + (ep_num * 20h) + 14h */ + uint32_t Reserved18[2]; /*!< Reserved B00h + (ep_num * 20h) + 18h - B00h + (ep_num * 20h) + 1Ch */ +} USB_OTG_OUTEndpointTypeDef; + + +/** + * @brief USB_OTG_Host_Mode_Register_Structures + */ +typedef struct +{ + __IO uint32_t HCFG; /*!< Host Configuration Register 400h */ + __IO uint32_t HFIR; /*!< Host Frame Interval Register 404h */ + __IO uint32_t HFNUM; /*!< Host Frame Nbr/Frame Remaining 408h */ + uint32_t Reserved40C; /*!< Reserved 40Ch */ + __IO uint32_t HPTXSTS; /*!< Host Periodic Tx FIFO/ Queue Status 410h */ + __IO uint32_t HAINT; /*!< Host All Channels Interrupt Register 414h */ + __IO uint32_t HAINTMSK; /*!< Host All Channels Interrupt Mask 418h */ +} USB_OTG_HostTypeDef; + +/** + * @brief USB_OTG_Host_Channel_Specific_Registers + */ +typedef struct +{ + __IO uint32_t HCCHAR; /*!< Host Channel Characteristics Register 500h */ + __IO uint32_t HCSPLT; /*!< Host Channel Split Control Register 504h */ + __IO uint32_t HCINT; /*!< Host Channel Interrupt Register 508h */ + __IO uint32_t HCINTMSK; /*!< Host Channel Interrupt Mask Register 50Ch */ + __IO uint32_t HCTSIZ; /*!< Host Channel Transfer Size Register 510h */ + __IO uint32_t HCDMA; /*!< Host Channel DMA Address Register 514h */ + uint32_t Reserved[2]; /*!< Reserved */ +} USB_OTG_HostChannelTypeDef; +/** + * @} + */ + + + + +/** @addtogroup Peripheral_memory_map + * @{ + */ +#define RAMITCM_BASE 0x00000000U /*!< Base address of : 16KB RAM reserved for CPU execution/instruction accessible over ITCM */ +#define FLASHITCM_BASE 0x00200000U /*!< Base address of : (up to 64 KB) embedded FLASH memory accessible over ITCM */ +#define FLASHAXI_BASE 0x08000000U /*!< Base address of : (up to 64 KB) embedded FLASH memory accessible over AXI */ +#define RAMDTCM_BASE 0x20000000U /*!< Base address of : 64KB system data RAM accessible over DTCM */ +#define PERIPH_BASE 0x40000000U /*!< Base address of : AHB/ABP Peripherals */ +#define BKPSRAM_BASE 0x40024000U /*!< Base address of : Backup SRAM(4 KB) */ +#define QSPI_BASE 0x90000000U /*!< Base address of : QSPI memories accessible over AXI */ +#define FMC_R_BASE 0xA0000000U /*!< Base address of : FMC Control registers */ +#define QSPI_R_BASE 0xA0001000U /*!< Base address of : QSPI Control registers */ +#define SRAM1_BASE 0x20010000U /*!< Base address of : 240KB RAM1 accessible over AXI/AHB */ +#define SRAM2_BASE 0x2004C000U /*!< Base address of : 16KB RAM2 accessible over AXI/AHB */ +#define FLASH_END 0x0800FFFFU /*!< FLASH end address */ +#define FLASH_OTP_BASE 0x1FF0F000U /*!< Base address of : (up to 1024 Bytes) embedded FLASH OTP Area */ +#define FLASH_OTP_END 0x1FF0F41FU /*!< End address of : (up to 1024 Bytes) embedded FLASH OTP Area */ + +/* Legacy define */ +#define FLASH_BASE FLASHAXI_BASE + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000U) +#define AHB1PERIPH_BASE (PERIPH_BASE + 0x00020000U) +#define AHB2PERIPH_BASE (PERIPH_BASE + 0x10000000U) + +/*!< APB1 peripherals */ +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000U) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400U) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800U) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00U) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000U) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400U) +#define TIM12_BASE (APB1PERIPH_BASE + 0x1800U) +#define TIM13_BASE (APB1PERIPH_BASE + 0x1C00U) +#define TIM14_BASE (APB1PERIPH_BASE + 0x2000U) +#define LPTIM1_BASE (APB1PERIPH_BASE + 0x2400U) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800U) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00U) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000U) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800U) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00U) +#define SPDIFRX_BASE (APB1PERIPH_BASE + 0x4000U) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400U) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800U) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00U) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000U) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400U) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800U) +#define I2C3_BASE (APB1PERIPH_BASE + 0x5C00U) +#define I2C4_BASE (APB1PERIPH_BASE + 0x6000U) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400U) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800U) +#define CEC_BASE (APB1PERIPH_BASE + 0x6C00U) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000U) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400U) +#define UART7_BASE (APB1PERIPH_BASE + 0x7800U) +#define UART8_BASE (APB1PERIPH_BASE + 0x7C00U) + +/*!< APB2 peripherals */ +#define TIM1_BASE (APB2PERIPH_BASE + 0x0000U) +#define TIM8_BASE (APB2PERIPH_BASE + 0x0400U) +#define USART1_BASE (APB2PERIPH_BASE + 0x1000U) +#define USART6_BASE (APB2PERIPH_BASE + 0x1400U) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2000U) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2100U) +#define ADC3_BASE (APB2PERIPH_BASE + 0x2200U) +#define ADC_BASE (APB2PERIPH_BASE + 0x2300U) +#define SDMMC1_BASE (APB2PERIPH_BASE + 0x2C00U) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000U) +#define SPI4_BASE (APB2PERIPH_BASE + 0x3400U) +#define SYSCFG_BASE (APB2PERIPH_BASE + 0x3800U) +#define EXTI_BASE (APB2PERIPH_BASE + 0x3C00U) +#define TIM9_BASE (APB2PERIPH_BASE + 0x4000U) +#define TIM10_BASE (APB2PERIPH_BASE + 0x4400U) +#define TIM11_BASE (APB2PERIPH_BASE + 0x4800U) +#define SPI5_BASE (APB2PERIPH_BASE + 0x5000U) +#define SPI6_BASE (APB2PERIPH_BASE + 0x5400U) +#define SAI1_BASE (APB2PERIPH_BASE + 0x5800U) +#define SAI2_BASE (APB2PERIPH_BASE + 0x5C00U) +#define SAI1_Block_A_BASE (SAI1_BASE + 0x004U) +#define SAI1_Block_B_BASE (SAI1_BASE + 0x024U) +#define SAI2_Block_A_BASE (SAI2_BASE + 0x004U) +#define SAI2_Block_B_BASE (SAI2_BASE + 0x024U) +#define LTDC_BASE (APB2PERIPH_BASE + 0x6800U) +#define LTDC_Layer1_BASE (LTDC_BASE + 0x84U) +#define LTDC_Layer2_BASE (LTDC_BASE + 0x104U) +/*!< AHB1 peripherals */ +#define GPIOA_BASE (AHB1PERIPH_BASE + 0x0000U) +#define GPIOB_BASE (AHB1PERIPH_BASE + 0x0400U) +#define GPIOC_BASE (AHB1PERIPH_BASE + 0x0800U) +#define GPIOD_BASE (AHB1PERIPH_BASE + 0x0C00U) +#define GPIOE_BASE (AHB1PERIPH_BASE + 0x1000U) +#define GPIOF_BASE (AHB1PERIPH_BASE + 0x1400U) +#define GPIOG_BASE (AHB1PERIPH_BASE + 0x1800U) +#define GPIOH_BASE (AHB1PERIPH_BASE + 0x1C00U) +#define GPIOI_BASE (AHB1PERIPH_BASE + 0x2000U) +#define GPIOJ_BASE (AHB1PERIPH_BASE + 0x2400U) +#define GPIOK_BASE (AHB1PERIPH_BASE + 0x2800U) +#define CRC_BASE (AHB1PERIPH_BASE + 0x3000U) +#define RCC_BASE (AHB1PERIPH_BASE + 0x3800U) +#define FLASH_R_BASE (AHB1PERIPH_BASE + 0x3C00U) +#define UID_BASE 0x1FF0F420U /*!< Unique device ID register base address */ +#define FLASHSIZE_BASE 0x1FF0F442U /*!< FLASH Size register base address */ +#define PACKAGE_BASE 0x1FFF7BF0U /*!< Package size register base address */ +/* Legacy define */ +#define PACKAGESIZE_BASE PACKAGE_BASE + +#define DMA1_BASE (AHB1PERIPH_BASE + 0x6000U) +#define DMA1_Stream0_BASE (DMA1_BASE + 0x010U) +#define DMA1_Stream1_BASE (DMA1_BASE + 0x028U) +#define DMA1_Stream2_BASE (DMA1_BASE + 0x040U) +#define DMA1_Stream3_BASE (DMA1_BASE + 0x058U) +#define DMA1_Stream4_BASE (DMA1_BASE + 0x070U) +#define DMA1_Stream5_BASE (DMA1_BASE + 0x088U) +#define DMA1_Stream6_BASE (DMA1_BASE + 0x0A0U) +#define DMA1_Stream7_BASE (DMA1_BASE + 0x0B8U) +#define DMA2_BASE (AHB1PERIPH_BASE + 0x6400U) +#define DMA2_Stream0_BASE (DMA2_BASE + 0x010U) +#define DMA2_Stream1_BASE (DMA2_BASE + 0x028U) +#define DMA2_Stream2_BASE (DMA2_BASE + 0x040U) +#define DMA2_Stream3_BASE (DMA2_BASE + 0x058U) +#define DMA2_Stream4_BASE (DMA2_BASE + 0x070U) +#define DMA2_Stream5_BASE (DMA2_BASE + 0x088U) +#define DMA2_Stream6_BASE (DMA2_BASE + 0x0A0U) +#define DMA2_Stream7_BASE (DMA2_BASE + 0x0B8U) +#define ETH_BASE (AHB1PERIPH_BASE + 0x8000U) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100U) +#define ETH_PTP_BASE (ETH_BASE + 0x0700U) +#define ETH_DMA_BASE (ETH_BASE + 0x1000U) +#define DMA2D_BASE (AHB1PERIPH_BASE + 0xB000U) +/*!< AHB2 peripherals */ +#define DCMI_BASE (AHB2PERIPH_BASE + 0x50000U) +#define CRYP_BASE (AHB2PERIPH_BASE + 0x60000U) +#define HASH_BASE (AHB2PERIPH_BASE + 0x60400U) +#define HASH_DIGEST_BASE (AHB2PERIPH_BASE + 0x60710U) +#define RNG_BASE (AHB2PERIPH_BASE + 0x60800U) +/*!< FMC Bankx registers base address */ +#define FMC_Bank1_R_BASE (FMC_R_BASE + 0x0000U) +#define FMC_Bank1E_R_BASE (FMC_R_BASE + 0x0104U) +#define FMC_Bank3_R_BASE (FMC_R_BASE + 0x0080U) +#define FMC_Bank5_6_R_BASE (FMC_R_BASE + 0x0140U) + +/* Debug MCU registers base address */ +#define DBGMCU_BASE 0xE0042000U + +/*!< USB registers base address */ +#define USB_OTG_HS_PERIPH_BASE 0x40040000U +#define USB_OTG_FS_PERIPH_BASE 0x50000000U + +#define USB_OTG_GLOBAL_BASE 0x000U +#define USB_OTG_DEVICE_BASE 0x800U +#define USB_OTG_IN_ENDPOINT_BASE 0x900U +#define USB_OTG_OUT_ENDPOINT_BASE 0xB00U +#define USB_OTG_EP_REG_SIZE 0x20U +#define USB_OTG_HOST_BASE 0x400U +#define USB_OTG_HOST_PORT_BASE 0x440U +#define USB_OTG_HOST_CHANNEL_BASE 0x500U +#define USB_OTG_HOST_CHANNEL_SIZE 0x20U +#define USB_OTG_PCGCCTL_BASE 0xE00U +#define USB_OTG_FIFO_BASE 0x1000U +#define USB_OTG_FIFO_SIZE 0x1000U + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define TIM12 ((TIM_TypeDef *) TIM12_BASE) +#define TIM13 ((TIM_TypeDef *) TIM13_BASE) +#define TIM14 ((TIM_TypeDef *) TIM14_BASE) +#define LPTIM1 ((LPTIM_TypeDef *) LPTIM1_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define SPDIFRX ((SPDIFRX_TypeDef *) SPDIFRX_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define I2C3 ((I2C_TypeDef *) I2C3_BASE) +#define I2C4 ((I2C_TypeDef *) I2C4_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define CEC ((CEC_TypeDef *) CEC_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC1 ((DAC_TypeDef *) DAC_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) /* Kept for legacy purpose */ +#define UART7 ((USART_TypeDef *) UART7_BASE) +#define UART8 ((USART_TypeDef *) UART8_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define USART6 ((USART_TypeDef *) USART6_BASE) +#define ADC ((ADC_Common_TypeDef *) ADC_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define ADC123_COMMON ((ADC_Common_TypeDef *) ADC_BASE) +#define SDMMC1 ((SDMMC_TypeDef *) SDMMC1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define SPI4 ((SPI_TypeDef *) SPI4_BASE) +#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define TIM9 ((TIM_TypeDef *) TIM9_BASE) +#define TIM10 ((TIM_TypeDef *) TIM10_BASE) +#define TIM11 ((TIM_TypeDef *) TIM11_BASE) +#define SPI5 ((SPI_TypeDef *) SPI5_BASE) +#define SPI6 ((SPI_TypeDef *) SPI6_BASE) +#define SAI1 ((SAI_TypeDef *) SAI1_BASE) +#define SAI2 ((SAI_TypeDef *) SAI2_BASE) +#define SAI1_Block_A ((SAI_Block_TypeDef *)SAI1_Block_A_BASE) +#define SAI1_Block_B ((SAI_Block_TypeDef *)SAI1_Block_B_BASE) +#define SAI2_Block_A ((SAI_Block_TypeDef *)SAI2_Block_A_BASE) +#define SAI2_Block_B ((SAI_Block_TypeDef *)SAI2_Block_B_BASE) +#define LTDC ((LTDC_TypeDef *)LTDC_BASE) +#define LTDC_Layer1 ((LTDC_Layer_TypeDef *)LTDC_Layer1_BASE) +#define LTDC_Layer2 ((LTDC_Layer_TypeDef *)LTDC_Layer2_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) +#define GPIOI ((GPIO_TypeDef *) GPIOI_BASE) +#define GPIOJ ((GPIO_TypeDef *) GPIOJ_BASE) +#define GPIOK ((GPIO_TypeDef *) GPIOK_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA1_Stream0 ((DMA_Stream_TypeDef *) DMA1_Stream0_BASE) +#define DMA1_Stream1 ((DMA_Stream_TypeDef *) DMA1_Stream1_BASE) +#define DMA1_Stream2 ((DMA_Stream_TypeDef *) DMA1_Stream2_BASE) +#define DMA1_Stream3 ((DMA_Stream_TypeDef *) DMA1_Stream3_BASE) +#define DMA1_Stream4 ((DMA_Stream_TypeDef *) DMA1_Stream4_BASE) +#define DMA1_Stream5 ((DMA_Stream_TypeDef *) DMA1_Stream5_BASE) +#define DMA1_Stream6 ((DMA_Stream_TypeDef *) DMA1_Stream6_BASE) +#define DMA1_Stream7 ((DMA_Stream_TypeDef *) DMA1_Stream7_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA2_Stream0 ((DMA_Stream_TypeDef *) DMA2_Stream0_BASE) +#define DMA2_Stream1 ((DMA_Stream_TypeDef *) DMA2_Stream1_BASE) +#define DMA2_Stream2 ((DMA_Stream_TypeDef *) DMA2_Stream2_BASE) +#define DMA2_Stream3 ((DMA_Stream_TypeDef *) DMA2_Stream3_BASE) +#define DMA2_Stream4 ((DMA_Stream_TypeDef *) DMA2_Stream4_BASE) +#define DMA2_Stream5 ((DMA_Stream_TypeDef *) DMA2_Stream5_BASE) +#define DMA2_Stream6 ((DMA_Stream_TypeDef *) DMA2_Stream6_BASE) +#define DMA2_Stream7 ((DMA_Stream_TypeDef *) DMA2_Stream7_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define DMA2D ((DMA2D_TypeDef *)DMA2D_BASE) +#define DCMI ((DCMI_TypeDef *) DCMI_BASE) +#define CRYP ((CRYP_TypeDef *) CRYP_BASE) +#define HASH ((HASH_TypeDef *) HASH_BASE) +#define HASH_DIGEST ((HASH_DIGEST_TypeDef *) HASH_DIGEST_BASE) +#define RNG ((RNG_TypeDef *) RNG_BASE) +#define FMC_Bank1 ((FMC_Bank1_TypeDef *) FMC_Bank1_R_BASE) +#define FMC_Bank1E ((FMC_Bank1E_TypeDef *) FMC_Bank1E_R_BASE) +#define FMC_Bank3 ((FMC_Bank3_TypeDef *) FMC_Bank3_R_BASE) +#define FMC_Bank5_6 ((FMC_Bank5_6_TypeDef *) FMC_Bank5_6_R_BASE) +#define QUADSPI ((QUADSPI_TypeDef *) QSPI_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) +#define USB_OTG_FS ((USB_OTG_GlobalTypeDef *) USB_OTG_FS_PERIPH_BASE) +#define USB_OTG_HS ((USB_OTG_GlobalTypeDef *) USB_OTG_HS_PERIPH_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* Analog to Digital Converter */ +/* */ +/******************************************************************************/ +/******************** Bit definition for ADC_SR register ********************/ +#define ADC_SR_AWD_Pos (0U) +#define ADC_SR_AWD_Msk (0x1U << ADC_SR_AWD_Pos) /*!< 0x00000001 */ +#define ADC_SR_AWD ADC_SR_AWD_Msk /*! + + + + + + + +Release Notes for STM32F7xx CMSIS + + +
+


+

+
+ + + + + + +
+ + + + + + + + + +
Back to Release page
+

Release +Notes for STM32F7xx CMSIS

+

Copyright +2016 STMicroelectronics

+

+
+

 

+ + + + + + +
+ +

Update History

+

V1.2.3 +/ 29-June-2018

      Main +Changes
  • Add the support of STM32F730xx and  STM32F750xx  devices
    • Add "stm32f730xx.h" and "stm32f750xx.h" header files
    • Add startup files "startup_stm32f730xx.s" and "startup_stm32f750xx.s" for EWARM, MDK-ARM and SW4STM32 toolchains
    • Add Linker files "stm32f730xx_flash.icf", "stm32f730xx_sram.icf" and "stm32f730xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f750xx_flash.icf", "stm32f750xx_sram.icf" and "stm32f750xx_ITCM_flash.icf" used within EWARM Workspaces

V1.2.2 +/ 26-December-2017

Main +Changes

+
  • Update bits definition for USBPHYC_PLL1 and USBPHYC_LDO registers to be inline with products documentation.

V1.2.1 +/ 25-August-2017

Main +Changes

+
  • Update FLASHSIZE_BASE and UID_BASE defined values for STM32F72x and STM32F73x devices.
  • Update stm32f7xx.h to include stm32f7xx_hal.h file instead of stm32f7xx_hal_conf.h file
  • Remove Date and Version from header files

V1.2.0 +/ 30-December-2016

Main +Changes

+
  • Add the support of STM32F722xx, STM32F723xx, STM32F732xx and STM32F733xx devices
    • Add "stm32f722xx.h", "stm32f723xx.h", "stm32f732xx.h" and "stm32f733xx.h" header files
    • Add startup files "startup_stm32f722xx.s", "startup_stm32f723xx.s", "startup_stm32f732xx.s" and "startup_stm32f733xx.s" for EWARM, MDK-ARM and SW4STM32 toolchains
    • Add Linker files "stm32f722xx_flash.icf", "stm32f722xx_sram.icf" and "stm32f722xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f723xx_flash.icf", "stm32f723xx_sram.icf" and "stm32f723xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f732xx_flash.icf", "stm32f732xx_sram.icf" and "stm32f732xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f733xx_flash.icf", "stm32f733xx_sram.icf" and "stm32f733xx_ITCM_flash.icf" used within EWARM Workspaces
  • All devices header files
    • Use _Pos and _Mask macro for all Bit Definitions
    • Use DAC1 instance instead of DAC
    • Add IS_SMBUS_ALL_INSTANCE macro
    • Add ADC123_COMMON instance
    • Add DMA_SxPAR_PA, DMA_SxM0AR_M0A and DMA_SxM1AR_M1A registers Bits Definition
    • Add DBGMCU_APB1_FZ_DBG_LPTIM1_STOP and DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT Bits Definition
    • Add FLASH_OTP_BASE and FLASH_OTP_END defines
    • Add MACDBGR register Bits Definition
    • Add GPIO_AFRL and GPIO_AFRH registers Bits Definition 
    • Add TIM2_OR, TIM5_OR and TIM11_OR registers Bits Definition
    • Add TIM1_AF1_BKINP Bit Definition for TIM1_AF1 register
    • Add +IS_TIM_32B_COUNTER_INSTANCE, IS_TIM_BREAK_INSTANCE, +IS_TIM_BREAKSOURCE_INSTANCE and IS_TIM_BKIN2_INSTANCE, +IS_TIM_CLOCK_DIVISION_INSTANCE, IS_TIM_REPETITION_COUNTER_INSTANCE, +IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE, +IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE, +IS_TIM_HALL_SENSOR_INTERFACE_INSTANCE and +IS_TIM_COMMUTATION_EVENT_INSTANCE macros
    • Add IS_USART_AUTOBAUDRATE_DETECTION_INSTANCE, IS_UART_HALFDUPLEX_INSTANCE and IS_UART_LIN_INSTANCE macros
    • Remove TIM_SMCR_OCCS Bit Definition for TIM_SMCR register
    • Remove USART_ISR_WUF and USART_ISR_REACK Bits Definition from USART_ISR register
    • Rename USART_CR1_M_0 / USART_CR1_M_1 defines to USART_CR1_M0 / USART_CR1_M1
    • Rename PACKAGESIZE_BASE define to PACKAGE_BASE
    • Rename RTC_OR_ALARMTYPE Bit Definition to RTC_OR_ALARMOUTTYPE
    • Rename RTC_CR_BCK Bit Definition to RTC_CR_BKP in RTC_CR register

V1.1.1 +/ 01-July-2016

Main +Changes

+
  • stm32f7xx.h
    • update to respectively associate STM32F778xx and STM32F768xx devices to STM32F779xx and STM32F769xx devices

V1.1.0 +/ 22-April-2016

Main +Changes

+
  • Add the support of STM32F765xx, STM32F767xx, STM32F768xx, STM32F769xx, STM32F777xx, STM32F778xx and STM32F779xx devices
    • Add "stm32f765xx.h", "stm32f767xx.h", "stm32f769xx.h", "stm32f777xx.h" and "stm32f779xx.h" header files
    • Add startup files "startup_stm32f765xx.s", "startup_stm32f767xx.s", "startup_stm32f769xx.s", "startup_stm32f777xx.s" and "startup_stm32f779xx.s" for EWARM, MDK-ARM and SW4STM32 toolchains
    • Add Linker files "stm32f765xx_flash.icf", "stm32f765xx_sram.icf" and "stm32f765xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f767xx_flash.icf", "stm32f767xx_sram.icf" and "stm32f767xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f769xx_flash.icf", "stm32f769xx_sram.icf" and "stm32f769xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f777xx_flash.icf", "stm32f777xx_sram.icf" and "stm32f777xx_ITCM_flash.icf" used within EWARM Workspaces
    • Add Linker files "stm32f779xx_flash.icf", "stm32f779xx_sram.icf" and "stm32f779xx_ITCM_flash.icf" used within EWARM Workspaces
    • STM32F768xx cmsis files are associated with STM32F767xx ones, as there is no difference between these devices on HAL side
    • STM32F778xx cmsis files are associated with STM32F777xx ones, as there is no difference between these devices on HAL side
  • All devices header files
    • Update Bit Definition names in DCMI_RISR / DCMI_IER registers
    • Update Bit Definition names in DMA2D_CR / DMA2D_FGPFCCR / DMA2D_BGPFCCR / DMA2D_OPFCCR registers
    • Update QUADSPI_CR_FTHRES Bit Definition in QUADSPI_CR register
    • Rename SAI_xFRCR_FSPO to SAI_xFRCR_FSPOL in SAI_xFRCR register
    • Rename ADC_CSR_DOVRx Bit Definition to ADC_CSR_OVRx in ADC_CSR register
    • Rename LTDC_GCR_DTEN Bit Definition to LTDC_GCR_DEN in LTDC_GCR register
    • Rename PWR_CSR1_UDSWRDY Bit Definition to PWR_CSR1_UDRDY in PWR_CSR1 register
    • Rename RTC_TAMPCR_TAMPx_TRG Bit Definition to RTC_TAMPCR_TAMPxTRG in RTC_TAMPCR register
    • Rename USART_ISR_LBD Bit Definition to USART_ISR_LBDF in USART_ISR register
    • Rename IS_SAI_BLOCK_PERIPH macro to IS_SAI_ALL_INSTANCE
    • Rename DCMI_ICR_OVF_ISC Bit Definition to DCMI_ICR_OVR_ISC
    • Rename DMA2D_IFSR register to DMA2D_IFCR
    • Rename EXTI_IMR_MRx Bit Definition to EXTI_IMR_IM0x
    • Rename EXTI_EMR_MRx Bit Definition to EXTI_EMR_EMx
    • Fix LPTIM_CR_SNGSTRT Bit Definition value in LPTIM_CR register
    • Fix mask incorrect naming in DBGMCU_APB2_FZ register
    • Fix Bits Definition for SYSCFG_EXTICR4_EXTI13_PI and SYSCFG_EXTICR4_EXTI13_PJ
    • Add DAC_CR_DMAUDRIEx Bit Definition in DAC_CR register
    • Add a new mask EXTI_IMR_IM in EXTI bits definition: Interrupt Mask All
    • Add UID_BASE define for Unique ID register base address
    • Add FLASHSIZE_BASE define for register base address
    • Add PACKAGESIZE_BASE define for register base address
    • Add FLASH_SECTOR_TOTAL define for total Flash sector number
    • Add Bits Definition for DCMI_ESCR, DCMI_ESUR, DCMI_CWSTRT, DCMI_CWSIZE and DCMI_DR registers
    • Add PWR_CSR1_EIWUP Bit Definition in PWR_CSR1 register
    • Add IP version define for QSPI: QSPI_V1_0
    • Add IS_UART_DRIVER_ENABLE_INSTANCE macro
    • Apply an 'U' suffix to all constants of 'unsigned' type (MISRA-C 2004 rule 10.6)
    • Remove uint32_t cast in all defines
    • Remove DMA_SxCR_ACK Bit Definition in DMA_SxCR register
    • Remove I2C_CR1_SWRST / I2C_CR1_WUPEN Bit Definitions in I2C_CR1 register
    • Keep the same DCMI register names (RISR, MISR, CWSTRTR and CWSIZER) as F4 family
  • system_stm32f7xx.c/.h files
    • Remove external memories configuration from the system_stm32f7xx.c common file (moved to Template Projects)
    • Add declaration of AHBPrescTable / APBPrescTable constant tables
  • stm32f7xx.h
    • Rename __STM32F7xx_CMSIS_DEVICE_VERSION_xx defines to __STM32F7_CMSIS_VERSION_xx (MISRA-C 2004 rule 5.1)

V1.0.3 +/ 13-November-2015

+

Main +Changes

+
  • stm32f745xx.h, stm32f746xx.h and stm32f756xx.h files
    • update __CM7_REV with proper Cortex M7 core revision
    • update SAI_xCR2_CPL bit definition
    • update WWDG bits naming to be aligned with reference manual
    • rename I2C_CR1_DFN bit to I2C_CR1_DNF
    • remove OR register definition from LPTIM_TypeDef structure
  • system_stm32f7xx.c
    • update SystemInit_ExtMemCtl() function implementation to allow simultaneous use of SDRAM and SRAM external memories

V1.0.2 +/ 21-September-2015

+

Main +Changes

+
  • stm32f745xx.h, stm32f746xx.h and stm32f756xx.h files
    • add new define USB_OTG_DOEPMSK_OTEPSPRM
    • add new define USB_OTG_DOEPINT_OTEPSPR

V1.0.1 +/ 25-June-2015

+

Main +Changes

+
  • stm32f745xx.h, stm32f746xx.h and stm32f756xx.h files
    • update IDR field declaration in CRC_TypeDef sructure
    • add I2C Own address 2 mask bits defininition in the I2C_OAR2 register
    • update SAI_xSR_FLVL_2 bit definition
  • stm32f756xx.h file
    • rename HASH_STR_NBWx bits definition to HASH_STR_NBLWx
    • rename HASH_IMR_DINIM bit definition to HASH_IMR_DINIE
    • rename HASH_IMR_DCIM bit definition to HASH_IMR_DCIE

V1.0.0 +/ 28-April-2015

+

Main +Changes

+
  • First +official release for STM32F756xx/746xx/745xx +devices
+
    +
+

License

+

+
+
+
Redistribution +and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met:
+ +
    +
  1. Redistributions +of source code must retain the above copyright notice, this list of +conditions and the following disclaimer.
    2. +
  2. Redistributions +in binary form must reproduce the above copyright notice, this list of +conditions and the following disclaimer in the +documentation and/or other materials provided with the distribution.
    3. +
  3. Neither the +name of STMicroelectronics nor the names of its contributors may be +used to endorse or promote products derived
    +
    4. +
+       +from this software without specific prior written permission.
+
+THIS +SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +THE POSSIBILITY OF SUCH DAMAGE.
+
+
+

  

+ +
+
+

For +complete documentation on STM32 Microcontrollers +visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f730xx.s b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f730xx.s new file mode 100644 index 000000000..0d5ce06b3 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f730xx.s @@ -0,0 +1,463 @@ +;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f730xx.s +;* Author : MCD Application Team +;* Description : STM32F730xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM7 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD 0 ; Reserved + DCD AES_IRQHandler ; AES + DCD RNG_IRQHandler ; RNG + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD 0 ; Reserved + DCD SAI1_IRQHandler ; SAI1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SDMMC2_IRQHandler ; SDMMC2 +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_HS_WKUP_IRQHandler [WEAK] + EXPORT OTG_HS_IRQHandler [WEAK] + EXPORT AES_IRQHandler [WEAK] + EXPORT RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT UART7_IRQHandler [WEAK] + EXPORT UART8_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT SDMMC2_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +OTG_FS_WKUP_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +DMA1_Stream7_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +OTG_FS_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +OTG_HS_EP1_OUT_IRQHandler +OTG_HS_EP1_IN_IRQHandler +OTG_HS_WKUP_IRQHandler +OTG_HS_IRQHandler +AES_IRQHandler +RNG_IRQHandler +FPU_IRQHandler +UART7_IRQHandler +UART8_IRQHandler +SPI4_IRQHandler +SPI5_IRQHandler +SAI1_IRQHandler +SAI2_IRQHandler +QUADSPI_IRQHandler +LPTIM1_IRQHandler +SDMMC2_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f750xx.s b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f750xx.s new file mode 100644 index 000000000..315d56871 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/arm/startup_stm32f750xx.s @@ -0,0 +1,485 @@ +;******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f750xx.s +;* Author : MCD Application Team +;* Description : STM32F750xx devices vector table for MDK-ARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM7 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +; +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD CAN2_TX_IRQHandler ; CAN2 TX + DCD CAN2_RX0_IRQHandler ; CAN2 RX0 + DCD CAN2_RX1_IRQHandler ; CAN2 RX1 + DCD CAN2_SCE_IRQHandler ; CAN2 SCE + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD DCMI_IRQHandler ; DCMI + DCD CRYP_IRQHandler ; CRYP crypto + DCD HASH_RNG_IRQHandler ; Hash and Rng + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD SPI6_IRQHandler ; SPI6 + DCD SAI1_IRQHandler ; SAI1 + DCD LTDC_IRQHandler ; LTDC + DCD LTDC_ER_IRQHandler ; LTDC error + DCD DMA2D_IRQHandler ; DMA2D + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD CEC_IRQHandler ; HDMI_CEC + DCD I2C4_EV_IRQHandler ; I2C4 Event + DCD I2C4_ER_IRQHandler ; I2C4 Error + DCD SPDIF_RX_IRQHandler ; SPDIF_RX +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT SystemInit + IMPORT __main + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMP_STAMP_IRQHandler [WEAK] + EXPORT RTC_WKUP_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Stream0_IRQHandler [WEAK] + EXPORT DMA1_Stream1_IRQHandler [WEAK] + EXPORT DMA1_Stream2_IRQHandler [WEAK] + EXPORT DMA1_Stream3_IRQHandler [WEAK] + EXPORT DMA1_Stream4_IRQHandler [WEAK] + EXPORT DMA1_Stream5_IRQHandler [WEAK] + EXPORT DMA1_Stream6_IRQHandler [WEAK] + EXPORT ADC_IRQHandler [WEAK] + EXPORT CAN1_TX_IRQHandler [WEAK] + EXPORT CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_TIM9_IRQHandler [WEAK] + EXPORT TIM1_UP_TIM10_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_TIM11_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTC_Alarm_IRQHandler [WEAK] + EXPORT OTG_FS_WKUP_IRQHandler [WEAK] + EXPORT TIM8_BRK_TIM12_IRQHandler [WEAK] + EXPORT TIM8_UP_TIM13_IRQHandler [WEAK] + EXPORT TIM8_TRG_COM_TIM14_IRQHandler [WEAK] + EXPORT TIM8_CC_IRQHandler [WEAK] + EXPORT DMA1_Stream7_IRQHandler [WEAK] + EXPORT FMC_IRQHandler [WEAK] + EXPORT SDMMC1_IRQHandler [WEAK] + EXPORT TIM5_IRQHandler [WEAK] + EXPORT SPI3_IRQHandler [WEAK] + EXPORT UART4_IRQHandler [WEAK] + EXPORT UART5_IRQHandler [WEAK] + EXPORT TIM6_DAC_IRQHandler [WEAK] + EXPORT TIM7_IRQHandler [WEAK] + EXPORT DMA2_Stream0_IRQHandler [WEAK] + EXPORT DMA2_Stream1_IRQHandler [WEAK] + EXPORT DMA2_Stream2_IRQHandler [WEAK] + EXPORT DMA2_Stream3_IRQHandler [WEAK] + EXPORT DMA2_Stream4_IRQHandler [WEAK] + EXPORT ETH_IRQHandler [WEAK] + EXPORT ETH_WKUP_IRQHandler [WEAK] + EXPORT CAN2_TX_IRQHandler [WEAK] + EXPORT CAN2_RX0_IRQHandler [WEAK] + EXPORT CAN2_RX1_IRQHandler [WEAK] + EXPORT CAN2_SCE_IRQHandler [WEAK] + EXPORT OTG_FS_IRQHandler [WEAK] + EXPORT DMA2_Stream5_IRQHandler [WEAK] + EXPORT DMA2_Stream6_IRQHandler [WEAK] + EXPORT DMA2_Stream7_IRQHandler [WEAK] + EXPORT USART6_IRQHandler [WEAK] + EXPORT I2C3_EV_IRQHandler [WEAK] + EXPORT I2C3_ER_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_OUT_IRQHandler [WEAK] + EXPORT OTG_HS_EP1_IN_IRQHandler [WEAK] + EXPORT OTG_HS_WKUP_IRQHandler [WEAK] + EXPORT OTG_HS_IRQHandler [WEAK] + EXPORT DCMI_IRQHandler [WEAK] + EXPORT CRYP_IRQHandler [WEAK] + EXPORT HASH_RNG_IRQHandler [WEAK] + EXPORT FPU_IRQHandler [WEAK] + EXPORT UART7_IRQHandler [WEAK] + EXPORT UART8_IRQHandler [WEAK] + EXPORT SPI4_IRQHandler [WEAK] + EXPORT SPI5_IRQHandler [WEAK] + EXPORT SPI6_IRQHandler [WEAK] + EXPORT SAI1_IRQHandler [WEAK] + EXPORT LTDC_IRQHandler [WEAK] + EXPORT LTDC_ER_IRQHandler [WEAK] + EXPORT DMA2D_IRQHandler [WEAK] + EXPORT SAI2_IRQHandler [WEAK] + EXPORT QUADSPI_IRQHandler [WEAK] + EXPORT LPTIM1_IRQHandler [WEAK] + EXPORT CEC_IRQHandler [WEAK] + EXPORT I2C4_EV_IRQHandler [WEAK] + EXPORT I2C4_ER_IRQHandler [WEAK] + EXPORT SPDIF_RX_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMP_STAMP_IRQHandler +RTC_WKUP_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Stream0_IRQHandler +DMA1_Stream1_IRQHandler +DMA1_Stream2_IRQHandler +DMA1_Stream3_IRQHandler +DMA1_Stream4_IRQHandler +DMA1_Stream5_IRQHandler +DMA1_Stream6_IRQHandler +ADC_IRQHandler +CAN1_TX_IRQHandler +CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_TIM9_IRQHandler +TIM1_UP_TIM10_IRQHandler +TIM1_TRG_COM_TIM11_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTC_Alarm_IRQHandler +OTG_FS_WKUP_IRQHandler +TIM8_BRK_TIM12_IRQHandler +TIM8_UP_TIM13_IRQHandler +TIM8_TRG_COM_TIM14_IRQHandler +TIM8_CC_IRQHandler +DMA1_Stream7_IRQHandler +FMC_IRQHandler +SDMMC1_IRQHandler +TIM5_IRQHandler +SPI3_IRQHandler +UART4_IRQHandler +UART5_IRQHandler +TIM6_DAC_IRQHandler +TIM7_IRQHandler +DMA2_Stream0_IRQHandler +DMA2_Stream1_IRQHandler +DMA2_Stream2_IRQHandler +DMA2_Stream3_IRQHandler +DMA2_Stream4_IRQHandler +ETH_IRQHandler +ETH_WKUP_IRQHandler +CAN2_TX_IRQHandler +CAN2_RX0_IRQHandler +CAN2_RX1_IRQHandler +CAN2_SCE_IRQHandler +OTG_FS_IRQHandler +DMA2_Stream5_IRQHandler +DMA2_Stream6_IRQHandler +DMA2_Stream7_IRQHandler +USART6_IRQHandler +I2C3_EV_IRQHandler +I2C3_ER_IRQHandler +OTG_HS_EP1_OUT_IRQHandler +OTG_HS_EP1_IN_IRQHandler +OTG_HS_WKUP_IRQHandler +OTG_HS_IRQHandler +DCMI_IRQHandler +CRYP_IRQHandler +HASH_RNG_IRQHandler +FPU_IRQHandler +UART7_IRQHandler +UART8_IRQHandler +SPI4_IRQHandler +SPI5_IRQHandler +SPI6_IRQHandler +SAI1_IRQHandler +LTDC_IRQHandler +LTDC_ER_IRQHandler +DMA2D_IRQHandler +SAI2_IRQHandler +QUADSPI_IRQHandler +LPTIM1_IRQHandler +CEC_IRQHandler +I2C4_EV_IRQHandler +I2C4_ER_IRQHandler +SPDIF_RX_IRQHandler + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f730xx.s b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f730xx.s new file mode 100644 index 000000000..6c34df2b7 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f730xx.s @@ -0,0 +1,556 @@ +/** + ****************************************************************************** + * @file startup_stm32f730xx.s + * @author MCD Application Team + * @brief STM32F730xx Devices vector table for GCC based toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M7 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m7 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M7. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word 0 /* Reserved */ + .word AES_IRQHandler /* AES */ + .word RNG_IRQHandler /* RNG */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word 0 /* Reserved */ + .word SAI1_IRQHandler /* SAI1 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SAI2_IRQHandler /* SAI2 */ + .word QUADSPI_IRQHandler /* QUADSPI */ + .word LPTIM1_IRQHandler /* LPTIM1 */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word 0 /* Reserved */ + .word SDMMC2_IRQHandler /* SDMMC2 */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak AES_IRQHandler + .thumb_set AES_IRQHandler,Default_Handler + + .weak RNG_IRQHandler + .thumb_set RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak SDMMC2_IRQHandler + .thumb_set SDMMC2_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f750xx.s b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f750xx.s new file mode 100644 index 000000000..e0858cc3b --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/gcc/startup_stm32f750xx.s @@ -0,0 +1,592 @@ +/** + ****************************************************************************** + * @file startup_stm32f750xx.s + * @author MCD Application Team + * @brief STM32F750xx Devices vector table for GCC based toolchain. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M7 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + *

© COPYRIGHT 2016 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m7 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M7. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDMMC1_IRQHandler /* SDMMC1 */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word CRYP_IRQHandler /* Crypto */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC */ + .word LTDC_ER_IRQHandler /* LTDC error */ + .word DMA2D_IRQHandler /* DMA2D */ + .word SAI2_IRQHandler /* SAI2 */ + .word QUADSPI_IRQHandler /* QUADSPI */ + .word LPTIM1_IRQHandler /* LPTIM1 */ + .word CEC_IRQHandler /* HDMI_CEC */ + .word I2C4_EV_IRQHandler /* I2C4 Event */ + .word I2C4_ER_IRQHandler /* I2C4 Error */ + .word SPDIF_RX_IRQHandler /* SPDIF_RX */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDMMC1_IRQHandler + .thumb_set SDMMC1_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak CRYP_IRQHandler + .thumb_set CRYP_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + + .weak SAI2_IRQHandler + .thumb_set SAI2_IRQHandler,Default_Handler + + .weak QUADSPI_IRQHandler + .thumb_set QUADSPI_IRQHandler,Default_Handler + + .weak LPTIM1_IRQHandler + .thumb_set LPTIM1_IRQHandler,Default_Handler + + .weak CEC_IRQHandler + .thumb_set CEC_IRQHandler,Default_Handler + + .weak I2C4_EV_IRQHandler + .thumb_set I2C4_EV_IRQHandler,Default_Handler + + .weak I2C4_ER_IRQHandler + .thumb_set I2C4_ER_IRQHandler,Default_Handler + + .weak SPDIF_RX_IRQHandler + .thumb_set SPDIF_RX_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_ITCM_flash.icf b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_ITCM_flash.icf new file mode 100644 index 000000000..22f187dbc --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_ITCM_flash.icf @@ -0,0 +1,35 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x00200000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x00200000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0020FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003FFFF; +define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x00003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; +place in ITCMRAM_region { }; \ No newline at end of file diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_flash.icf b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_flash.icf new file mode 100644 index 000000000..60db2a31c --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_flash.icf @@ -0,0 +1,34 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003FFFF; +define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x00003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; \ No newline at end of file diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_sram.icf b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_sram.icf new file mode 100644 index 000000000..4c4ae8250 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f730xx_sram.icf @@ -0,0 +1,34 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x20000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x20000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x2002FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20030000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2003FFFF; +define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x00003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_ITCM_flash.icf b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_ITCM_flash.icf new file mode 100644 index 000000000..89c396f44 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_ITCM_flash.icf @@ -0,0 +1,35 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x00200000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x00200000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0020FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2004FFFF; +define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x00003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; +place in ITCMRAM_region { }; \ No newline at end of file diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_flash.icf b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_flash.icf new file mode 100644 index 000000000..63028a054 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_flash.icf @@ -0,0 +1,34 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x08000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x0800FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2004FFFF; +define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x00003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; \ No newline at end of file diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_sram.icf b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_sram.icf new file mode 100644 index 000000000..3e3947d8b --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/linker/stm32f750xx_sram.icf @@ -0,0 +1,34 @@ +/*###ICF### Section handled by ICF editor, don't touch! ****/ +/*-Editor annotation file-*/ +/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ +/*-Specials-*/ +define symbol __ICFEDIT_intvec_start__ = 0x20000000; +/*-Memory Regions-*/ +define symbol __ICFEDIT_region_ROM_start__ = 0x20000000; +define symbol __ICFEDIT_region_ROM_end__ = 0x2002FFFF; +define symbol __ICFEDIT_region_RAM_start__ = 0x20030000; +define symbol __ICFEDIT_region_RAM_end__ = 0x2004FFFF; +define symbol __ICFEDIT_region_ITCMRAM_start__ = 0x00000000; +define symbol __ICFEDIT_region_ITCMRAM_end__ = 0x00003FFF; +/*-Sizes-*/ +define symbol __ICFEDIT_size_cstack__ = 0x400; +define symbol __ICFEDIT_size_heap__ = 0x200; +/**** End of ICF editor section. ###ICF###*/ + + +define memory mem with size = 4G; +define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; +define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; +define region ITCMRAM_region = mem:[from __ICFEDIT_region_ITCMRAM_start__ to __ICFEDIT_region_ITCMRAM_end__]; + +define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; +define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; + +initialize by copy { readwrite }; +do not initialize { section .noinit }; + +place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; + +place in ROM_region { readonly }; +place in RAM_region { readwrite, + block CSTACK, block HEAP }; diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f730xx.s b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f730xx.s new file mode 100644 index 000000000..30e1ba897 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f730xx.s @@ -0,0 +1,671 @@ +;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f730xx.s +;* Author : MCD Application Team +;* Description : STM32F730xx devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M7 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD 0 ; Reserved + DCD AES_IRQHandler ; AES + DCD RNG_IRQHandler ; RNG + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD 0 ; Reserved + DCD SAI1_IRQHandler ; SAI1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SDMMC2_IRQHandler ; SDMMC2 +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + PUBWEAK TAMP_STAMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_IRQHandler + B TAMP_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Stream0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream0_IRQHandler + B DMA1_Stream0_IRQHandler + + PUBWEAK DMA1_Stream1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream1_IRQHandler + B DMA1_Stream1_IRQHandler + + PUBWEAK DMA1_Stream2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream2_IRQHandler + B DMA1_Stream2_IRQHandler + + PUBWEAK DMA1_Stream3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream3_IRQHandler + B DMA1_Stream3_IRQHandler + + PUBWEAK DMA1_Stream4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream4_IRQHandler + B DMA1_Stream4_IRQHandler + + PUBWEAK DMA1_Stream5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream5_IRQHandler + B DMA1_Stream5_IRQHandler + + PUBWEAK DMA1_Stream6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream6_IRQHandler + B DMA1_Stream6_IRQHandler + + PUBWEAK ADC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC_IRQHandler + B ADC_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_SCE_IRQHandler + B CAN1_SCE_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_TIM9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_TIM9_IRQHandler + B TIM1_BRK_TIM9_IRQHandler + + PUBWEAK TIM1_UP_TIM10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM10_IRQHandler + B TIM1_UP_TIM10_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM11_IRQHandler + B TIM1_TRG_COM_TIM11_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + PUBWEAK TIM4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM4_IRQHandler + B TIM4_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK USART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART3_IRQHandler + B USART3_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK OTG_FS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_WKUP_IRQHandler + B OTG_FS_WKUP_IRQHandler + + PUBWEAK TIM8_BRK_TIM12_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_BRK_TIM12_IRQHandler + B TIM8_BRK_TIM12_IRQHandler + + PUBWEAK TIM8_UP_TIM13_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_UP_TIM13_IRQHandler + B TIM8_UP_TIM13_IRQHandler + + PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_TRG_COM_TIM14_IRQHandler + B TIM8_TRG_COM_TIM14_IRQHandler + + PUBWEAK TIM8_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_CC_IRQHandler + B TIM8_CC_IRQHandler + + PUBWEAK DMA1_Stream7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream7_IRQHandler + B DMA1_Stream7_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK SDMMC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDMMC1_IRQHandler + B SDMMC1_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK UART5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART5_IRQHandler + B UART5_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK DMA2_Stream0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream0_IRQHandler + B DMA2_Stream0_IRQHandler + + PUBWEAK DMA2_Stream1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream1_IRQHandler + B DMA2_Stream1_IRQHandler + + PUBWEAK DMA2_Stream2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream2_IRQHandler + B DMA2_Stream2_IRQHandler + + PUBWEAK DMA2_Stream3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream3_IRQHandler + B DMA2_Stream3_IRQHandler + + PUBWEAK DMA2_Stream4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream4_IRQHandler + B DMA2_Stream4_IRQHandler + + PUBWEAK OTG_FS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_IRQHandler + B OTG_FS_IRQHandler + + PUBWEAK DMA2_Stream5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream5_IRQHandler + B DMA2_Stream5_IRQHandler + + PUBWEAK DMA2_Stream6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream6_IRQHandler + B DMA2_Stream6_IRQHandler + + PUBWEAK DMA2_Stream7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream7_IRQHandler + B DMA2_Stream7_IRQHandler + + PUBWEAK USART6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART6_IRQHandler + B USART6_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK OTG_HS_EP1_OUT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_EP1_OUT_IRQHandler + B OTG_HS_EP1_OUT_IRQHandler + + PUBWEAK OTG_HS_EP1_IN_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_EP1_IN_IRQHandler + B OTG_HS_EP1_IN_IRQHandler + + PUBWEAK OTG_HS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_WKUP_IRQHandler + B OTG_HS_WKUP_IRQHandler + + PUBWEAK OTG_HS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_IRQHandler + B OTG_HS_IRQHandler + + PUBWEAK AES_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +AES_IRQHandler + B AES_IRQHandler + + PUBWEAK RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RNG_IRQHandler + B RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK UART7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART7_IRQHandler + B UART7_IRQHandler + + PUBWEAK UART8_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART8_IRQHandler + B UART8_IRQHandler + + PUBWEAK SPI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI4_IRQHandler + B SPI4_IRQHandler + + PUBWEAK SPI5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI5_IRQHandler + B SPI5_IRQHandler + + PUBWEAK SAI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI1_IRQHandler + B SAI1_IRQHandler + + PUBWEAK SAI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI2_IRQHandler + B SAI2_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK SDMMC2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDMMC2_IRQHandler + B SDMMC2_IRQHandler + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f750xx.s b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f750xx.s new file mode 100644 index 000000000..f0bd8a834 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Device/ST/STM32F7xx/Source/Templates/iar/startup_stm32f750xx.s @@ -0,0 +1,735 @@ +;/******************** (C) COPYRIGHT 2016 STMicroelectronics ******************** +;* File Name : startup_stm32f750xx.s +;* Author : MCD Application Team +;* Description : STM32F750xx devices vector table for EWARM toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == _iar_program_start, +;* - Set the vector table entries with the exceptions ISR +;* address. +;* - Branches to main in the C library (which eventually +;* calls main()). +;* After Reset the Cortex-M7 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;******************************************************************************** +;* +;* Redistribution and use in source and binary forms, with or without modification, +;* are permitted provided that the following conditions are met: +;* 1. Redistributions of source code must retain the above copyright notice, +;* this list of conditions and the following disclaimer. +;* 2. Redistributions in binary form must reproduce the above copyright notice, +;* this list of conditions and the following disclaimer in the documentation +;* and/or other materials provided with the distribution. +;* 3. Neither the name of STMicroelectronics nor the names of its contributors +;* may be used to endorse or promote products derived from this software +;* without specific prior written permission. +;* +;* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +;* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +;* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +;* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +;* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +;* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +;* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +;* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +;* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +;* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +;* +;******************************************************************************* +; +; +; The modules in this file are included in the libraries, and may be replaced +; by any user-defined modules that define the PUBLIC symbol _program_start or +; a user defined start symbol. +; To override the cstartup defined in the library, simply add your modified +; version to the workbench project. +; +; The vector table is normally located at address 0. +; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. +; The name "__vector_table" has special meaning for C-SPY: +; it is where the SP start value is found, and the NVIC vector +; table register (VTOR) is initialized to this address if != 0. +; +; Cortex-M version +; + + MODULE ?cstartup + + ;; Forward declaration of sections. + SECTION CSTACK:DATA:NOROOT(3) + + SECTION .intvec:CODE:NOROOT(2) + + EXTERN __iar_program_start + EXTERN SystemInit + PUBLIC __vector_table + + DATA +__vector_table + DCD sfe(CSTACK) + DCD Reset_Handler ; Reset Handler + + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window WatchDog + DCD PVD_IRQHandler ; PVD through EXTI Line detection + DCD TAMP_STAMP_IRQHandler ; Tamper and TimeStamps through the EXTI line + DCD RTC_WKUP_IRQHandler ; RTC Wakeup through the EXTI line + DCD FLASH_IRQHandler ; FLASH + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line0 + DCD EXTI1_IRQHandler ; EXTI Line1 + DCD EXTI2_IRQHandler ; EXTI Line2 + DCD EXTI3_IRQHandler ; EXTI Line3 + DCD EXTI4_IRQHandler ; EXTI Line4 + DCD DMA1_Stream0_IRQHandler ; DMA1 Stream 0 + DCD DMA1_Stream1_IRQHandler ; DMA1 Stream 1 + DCD DMA1_Stream2_IRQHandler ; DMA1 Stream 2 + DCD DMA1_Stream3_IRQHandler ; DMA1 Stream 3 + DCD DMA1_Stream4_IRQHandler ; DMA1 Stream 4 + DCD DMA1_Stream5_IRQHandler ; DMA1 Stream 5 + DCD DMA1_Stream6_IRQHandler ; DMA1 Stream 6 + DCD ADC_IRQHandler ; ADC1, ADC2 and ADC3s + DCD CAN1_TX_IRQHandler ; CAN1 TX + DCD CAN1_RX0_IRQHandler ; CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; External Line[9:5]s + DCD TIM1_BRK_TIM9_IRQHandler ; TIM1 Break and TIM9 + DCD TIM1_UP_TIM10_IRQHandler ; TIM1 Update and TIM10 + DCD TIM1_TRG_COM_TIM11_IRQHandler ; TIM1 Trigger and Commutation and TIM11 + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; External Line[15:10]s + DCD RTC_Alarm_IRQHandler ; RTC Alarm (A and B) through EXTI Line + DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line + DCD TIM8_BRK_TIM12_IRQHandler ; TIM8 Break and TIM12 + DCD TIM8_UP_TIM13_IRQHandler ; TIM8 Update and TIM13 + DCD TIM8_TRG_COM_TIM14_IRQHandler ; TIM8 Trigger and Commutation and TIM14 + DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare + DCD DMA1_Stream7_IRQHandler ; DMA1 Stream7 + DCD FMC_IRQHandler ; FMC + DCD SDMMC1_IRQHandler ; SDMMC1 + DCD TIM5_IRQHandler ; TIM5 + DCD SPI3_IRQHandler ; SPI3 + DCD UART4_IRQHandler ; UART4 + DCD UART5_IRQHandler ; UART5 + DCD TIM6_DAC_IRQHandler ; TIM6 and DAC1&2 underrun errors + DCD TIM7_IRQHandler ; TIM7 + DCD DMA2_Stream0_IRQHandler ; DMA2 Stream 0 + DCD DMA2_Stream1_IRQHandler ; DMA2 Stream 1 + DCD DMA2_Stream2_IRQHandler ; DMA2 Stream 2 + DCD DMA2_Stream3_IRQHandler ; DMA2 Stream 3 + DCD DMA2_Stream4_IRQHandler ; DMA2 Stream 4 + DCD ETH_IRQHandler ; Ethernet + DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line + DCD CAN2_TX_IRQHandler ; CAN2 TX + DCD CAN2_RX0_IRQHandler ; CAN2 RX0 + DCD CAN2_RX1_IRQHandler ; CAN2 RX1 + DCD CAN2_SCE_IRQHandler ; CAN2 SCE + DCD OTG_FS_IRQHandler ; USB OTG FS + DCD DMA2_Stream5_IRQHandler ; DMA2 Stream 5 + DCD DMA2_Stream6_IRQHandler ; DMA2 Stream 6 + DCD DMA2_Stream7_IRQHandler ; DMA2 Stream 7 + DCD USART6_IRQHandler ; USART6 + DCD I2C3_EV_IRQHandler ; I2C3 event + DCD I2C3_ER_IRQHandler ; I2C3 error + DCD OTG_HS_EP1_OUT_IRQHandler ; USB OTG HS End Point 1 Out + DCD OTG_HS_EP1_IN_IRQHandler ; USB OTG HS End Point 1 In + DCD OTG_HS_WKUP_IRQHandler ; USB OTG HS Wakeup through EXTI + DCD OTG_HS_IRQHandler ; USB OTG HS + DCD DCMI_IRQHandler ; DCMI + DCD CRYP_IRQHandler ; CRYP crypto + DCD HASH_RNG_IRQHandler ; Hash and Rng + DCD FPU_IRQHandler ; FPU + DCD UART7_IRQHandler ; UART7 + DCD UART8_IRQHandler ; UART8 + DCD SPI4_IRQHandler ; SPI4 + DCD SPI5_IRQHandler ; SPI5 + DCD SPI6_IRQHandler ; SPI6 + DCD SAI1_IRQHandler ; SAI1 + DCD LTDC_IRQHandler ; LTDC + DCD LTDC_ER_IRQHandler ; LTDC error + DCD DMA2D_IRQHandler ; DMA2D + DCD SAI2_IRQHandler ; SAI2 + DCD QUADSPI_IRQHandler ; QUADSPI + DCD LPTIM1_IRQHandler ; LPTIM1 + DCD CEC_IRQHandler ; HDMI_CEC + DCD I2C4_EV_IRQHandler ; I2C4 Event + DCD I2C4_ER_IRQHandler ; I2C4 Error + DCD SPDIF_RX_IRQHandler ; SPDIF_RX +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; +;; +;; Default interrupt handlers. +;; + THUMB + PUBWEAK Reset_Handler + SECTION .text:CODE:NOROOT:REORDER(2) +Reset_Handler + + LDR R0, =SystemInit + BLX R0 + LDR R0, =__iar_program_start + BX R0 + + PUBWEAK NMI_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +NMI_Handler + B NMI_Handler + + PUBWEAK HardFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +HardFault_Handler + B HardFault_Handler + + PUBWEAK MemManage_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +MemManage_Handler + B MemManage_Handler + + PUBWEAK BusFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +BusFault_Handler + B BusFault_Handler + + PUBWEAK UsageFault_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +UsageFault_Handler + B UsageFault_Handler + + PUBWEAK SVC_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SVC_Handler + B SVC_Handler + + PUBWEAK DebugMon_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +DebugMon_Handler + B DebugMon_Handler + + PUBWEAK PendSV_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +PendSV_Handler + B PendSV_Handler + + PUBWEAK SysTick_Handler + SECTION .text:CODE:NOROOT:REORDER(1) +SysTick_Handler + B SysTick_Handler + + PUBWEAK WWDG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +WWDG_IRQHandler + B WWDG_IRQHandler + + PUBWEAK PVD_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +PVD_IRQHandler + B PVD_IRQHandler + + PUBWEAK TAMP_STAMP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TAMP_STAMP_IRQHandler + B TAMP_STAMP_IRQHandler + + PUBWEAK RTC_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_WKUP_IRQHandler + B RTC_WKUP_IRQHandler + + PUBWEAK FLASH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FLASH_IRQHandler + B FLASH_IRQHandler + + PUBWEAK RCC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RCC_IRQHandler + B RCC_IRQHandler + + PUBWEAK EXTI0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI0_IRQHandler + B EXTI0_IRQHandler + + PUBWEAK EXTI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI1_IRQHandler + B EXTI1_IRQHandler + + PUBWEAK EXTI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI2_IRQHandler + B EXTI2_IRQHandler + + PUBWEAK EXTI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI3_IRQHandler + B EXTI3_IRQHandler + + PUBWEAK EXTI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI4_IRQHandler + B EXTI4_IRQHandler + + PUBWEAK DMA1_Stream0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream0_IRQHandler + B DMA1_Stream0_IRQHandler + + PUBWEAK DMA1_Stream1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream1_IRQHandler + B DMA1_Stream1_IRQHandler + + PUBWEAK DMA1_Stream2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream2_IRQHandler + B DMA1_Stream2_IRQHandler + + PUBWEAK DMA1_Stream3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream3_IRQHandler + B DMA1_Stream3_IRQHandler + + PUBWEAK DMA1_Stream4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream4_IRQHandler + B DMA1_Stream4_IRQHandler + + PUBWEAK DMA1_Stream5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream5_IRQHandler + B DMA1_Stream5_IRQHandler + + PUBWEAK DMA1_Stream6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream6_IRQHandler + B DMA1_Stream6_IRQHandler + + PUBWEAK ADC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ADC_IRQHandler + B ADC_IRQHandler + + PUBWEAK CAN1_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_TX_IRQHandler + B CAN1_TX_IRQHandler + + PUBWEAK CAN1_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX0_IRQHandler + B CAN1_RX0_IRQHandler + + PUBWEAK CAN1_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_RX1_IRQHandler + B CAN1_RX1_IRQHandler + + PUBWEAK CAN1_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN1_SCE_IRQHandler + B CAN1_SCE_IRQHandler + + PUBWEAK EXTI9_5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI9_5_IRQHandler + B EXTI9_5_IRQHandler + + PUBWEAK TIM1_BRK_TIM9_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_BRK_TIM9_IRQHandler + B TIM1_BRK_TIM9_IRQHandler + + PUBWEAK TIM1_UP_TIM10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_UP_TIM10_IRQHandler + B TIM1_UP_TIM10_IRQHandler + + PUBWEAK TIM1_TRG_COM_TIM11_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_TRG_COM_TIM11_IRQHandler + B TIM1_TRG_COM_TIM11_IRQHandler + + PUBWEAK TIM1_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM1_CC_IRQHandler + B TIM1_CC_IRQHandler + + PUBWEAK TIM2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM2_IRQHandler + B TIM2_IRQHandler + + PUBWEAK TIM3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM3_IRQHandler + B TIM3_IRQHandler + + PUBWEAK TIM4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM4_IRQHandler + B TIM4_IRQHandler + + PUBWEAK I2C1_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_EV_IRQHandler + B I2C1_EV_IRQHandler + + PUBWEAK I2C1_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C1_ER_IRQHandler + B I2C1_ER_IRQHandler + + PUBWEAK I2C2_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_EV_IRQHandler + B I2C2_EV_IRQHandler + + PUBWEAK I2C2_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C2_ER_IRQHandler + B I2C2_ER_IRQHandler + + PUBWEAK SPI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI1_IRQHandler + B SPI1_IRQHandler + + PUBWEAK SPI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI2_IRQHandler + B SPI2_IRQHandler + + PUBWEAK USART1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART1_IRQHandler + B USART1_IRQHandler + + PUBWEAK USART2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART2_IRQHandler + B USART2_IRQHandler + + PUBWEAK USART3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART3_IRQHandler + B USART3_IRQHandler + + PUBWEAK EXTI15_10_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +EXTI15_10_IRQHandler + B EXTI15_10_IRQHandler + + PUBWEAK RTC_Alarm_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +RTC_Alarm_IRQHandler + B RTC_Alarm_IRQHandler + + PUBWEAK OTG_FS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_WKUP_IRQHandler + B OTG_FS_WKUP_IRQHandler + + PUBWEAK TIM8_BRK_TIM12_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_BRK_TIM12_IRQHandler + B TIM8_BRK_TIM12_IRQHandler + + PUBWEAK TIM8_UP_TIM13_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_UP_TIM13_IRQHandler + B TIM8_UP_TIM13_IRQHandler + + PUBWEAK TIM8_TRG_COM_TIM14_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_TRG_COM_TIM14_IRQHandler + B TIM8_TRG_COM_TIM14_IRQHandler + + PUBWEAK TIM8_CC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM8_CC_IRQHandler + B TIM8_CC_IRQHandler + + PUBWEAK DMA1_Stream7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA1_Stream7_IRQHandler + B DMA1_Stream7_IRQHandler + + PUBWEAK FMC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FMC_IRQHandler + B FMC_IRQHandler + + PUBWEAK SDMMC1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SDMMC1_IRQHandler + B SDMMC1_IRQHandler + + PUBWEAK TIM5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM5_IRQHandler + B TIM5_IRQHandler + + PUBWEAK SPI3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI3_IRQHandler + B SPI3_IRQHandler + + PUBWEAK UART4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART4_IRQHandler + B UART4_IRQHandler + + PUBWEAK UART5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART5_IRQHandler + B UART5_IRQHandler + + PUBWEAK TIM6_DAC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM6_DAC_IRQHandler + B TIM6_DAC_IRQHandler + + PUBWEAK TIM7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +TIM7_IRQHandler + B TIM7_IRQHandler + + PUBWEAK DMA2_Stream0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream0_IRQHandler + B DMA2_Stream0_IRQHandler + + PUBWEAK DMA2_Stream1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream1_IRQHandler + B DMA2_Stream1_IRQHandler + + PUBWEAK DMA2_Stream2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream2_IRQHandler + B DMA2_Stream2_IRQHandler + + PUBWEAK DMA2_Stream3_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream3_IRQHandler + B DMA2_Stream3_IRQHandler + + PUBWEAK DMA2_Stream4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream4_IRQHandler + B DMA2_Stream4_IRQHandler + + PUBWEAK ETH_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ETH_IRQHandler + B ETH_IRQHandler + + PUBWEAK ETH_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +ETH_WKUP_IRQHandler + B ETH_WKUP_IRQHandler + + PUBWEAK CAN2_TX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_TX_IRQHandler + B CAN2_TX_IRQHandler + + PUBWEAK CAN2_RX0_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_RX0_IRQHandler + B CAN2_RX0_IRQHandler + + PUBWEAK CAN2_RX1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_RX1_IRQHandler + B CAN2_RX1_IRQHandler + + PUBWEAK CAN2_SCE_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CAN2_SCE_IRQHandler + B CAN2_SCE_IRQHandler + + PUBWEAK OTG_FS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_FS_IRQHandler + B OTG_FS_IRQHandler + + PUBWEAK DMA2_Stream5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream5_IRQHandler + B DMA2_Stream5_IRQHandler + + PUBWEAK DMA2_Stream6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream6_IRQHandler + B DMA2_Stream6_IRQHandler + + PUBWEAK DMA2_Stream7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2_Stream7_IRQHandler + B DMA2_Stream7_IRQHandler + + PUBWEAK USART6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +USART6_IRQHandler + B USART6_IRQHandler + + PUBWEAK I2C3_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_EV_IRQHandler + B I2C3_EV_IRQHandler + + PUBWEAK I2C3_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C3_ER_IRQHandler + B I2C3_ER_IRQHandler + + PUBWEAK OTG_HS_EP1_OUT_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_EP1_OUT_IRQHandler + B OTG_HS_EP1_OUT_IRQHandler + + PUBWEAK OTG_HS_EP1_IN_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_EP1_IN_IRQHandler + B OTG_HS_EP1_IN_IRQHandler + + PUBWEAK OTG_HS_WKUP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_WKUP_IRQHandler + B OTG_HS_WKUP_IRQHandler + + PUBWEAK OTG_HS_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +OTG_HS_IRQHandler + B OTG_HS_IRQHandler + + PUBWEAK DCMI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DCMI_IRQHandler + B DCMI_IRQHandler + + PUBWEAK CRYP_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CRYP_IRQHandler + B CRYP_IRQHandler + + PUBWEAK HASH_RNG_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +HASH_RNG_IRQHandler + B HASH_RNG_IRQHandler + + PUBWEAK FPU_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +FPU_IRQHandler + B FPU_IRQHandler + + PUBWEAK UART7_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART7_IRQHandler + B UART7_IRQHandler + + PUBWEAK UART8_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +UART8_IRQHandler + B UART8_IRQHandler + + PUBWEAK SPI4_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI4_IRQHandler + B SPI4_IRQHandler + + PUBWEAK SPI5_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI5_IRQHandler + B SPI5_IRQHandler + + PUBWEAK SPI6_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPI6_IRQHandler + B SPI6_IRQHandler + + PUBWEAK SAI1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI1_IRQHandler + B SAI1_IRQHandler + + PUBWEAK LTDC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LTDC_IRQHandler + B LTDC_IRQHandler + + PUBWEAK LTDC_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LTDC_ER_IRQHandler + B LTDC_ER_IRQHandler + + PUBWEAK DMA2D_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +DMA2D_IRQHandler + B DMA2D_IRQHandler + + PUBWEAK SAI2_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SAI2_IRQHandler + B SAI2_IRQHandler + + PUBWEAK QUADSPI_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +QUADSPI_IRQHandler + B QUADSPI_IRQHandler + + PUBWEAK LPTIM1_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +LPTIM1_IRQHandler + B LPTIM1_IRQHandler + + PUBWEAK CEC_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +CEC_IRQHandler + B CEC_IRQHandler + + PUBWEAK I2C4_EV_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C4_EV_IRQHandler + B I2C4_EV_IRQHandler + + PUBWEAK I2C4_ER_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +I2C4_ER_IRQHandler + B I2C4_ER_IRQHandler + + PUBWEAK SPDIF_RX_IRQHandler + SECTION .text:CODE:NOROOT:REORDER(1) +SPDIF_RX_IRQHandler + B SPDIF_RX_IRQHandler + END +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Documentation/index.html b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Documentation/index.html new file mode 100644 index 000000000..e86662157 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/CMSIS/Documentation/index.html @@ -0,0 +1,14 @@ + + + +Redirect to the CMSIS main page after 0 seconds + + + + + + +If the automatic redirection is failing, click open CMSIS Documentation. + + + diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Release_Notes.html b/bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Release_Notes.html new file mode 100644 index 000000000..692362e08 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Release_Notes.html @@ -0,0 +1,1096 @@ + + + + + + + + +Release Notes for STM32F7xx HAL Drivers + + + + + +
+

 

+
+ + + + + + +
+ + + + + + + + + +
+

Back to Release page

+
+

Release +Notes for STM32F7xx HAL Drivers

+

Copyright +2017 STMicroelectronics

+

+
+

 The hardware +abstraction layer (HAL) provides low level drivers and the hardware +interfacing methods to interact with upper layer (application, +libraries and stacks).  It includes a complete set of ready-to-use +APIs, that are feature-oriented instead of IP-Oriented to simplify user +application development.

+ + + + + + +
+

Update History

V1.2.6 / 29-June-2018

Main Changes

  • Update to support STM32F730xx and STM32F750xx value lines
  • HAL DMA update
    • DMA_CHANNEL_8 to DMA_CHANNEL_15 are also defined in case of STM32F730xx (same features as STM32F733xx line)
  • HAL FLASH update
    • Add support of STM32F730xx with 4 FLash sectors of 16KB each.
    • Add support of STM32F750xx with 2 FLash sectors of 32KB each.
  • HAL GPIO update
    • Add support of STM32F730xx value line : same features as STM32F733xx line
    • Add support of STM32F750xx value line : same features as STM32F756xx line
  • HAL RCC update
    • Add support of STM32F730xx value line : same features as STM32F733xx line
    • Add support of STM32F750xx value line : same features as STM32F756xx line

V1.2.5 / 02-February-2018

+

Main +Changes

  • General updates to fix known defects and enhancements implementation
  • HAL update
    • Add new macro to get variable aligned on 32-bytes, required for cache maintenance purpose
    • Update UNUSED() macro implementation to avoid GCC warning
      • The warning is detected when the UNUSED() macro is called from C++ file
  • HAL SAI update
    • Update HAL_SAI_DMAStop() and HAL_SAI_Abort() process to fix the lock/unlock audio issue
  • HAL PWR update
    • Update +HAL_PWR_EnterSLEEPMode() and HAL_PWR_EnterSTOPMode() APIs to ensure +that all instructions finished before entering STOP mode.
  • HAL HCD update
    • Add new callback to be used to handle usb device connection/disconnection
      • HAL_HCD_PortEnabled_Callback()
      • HAL_HCD_PortDisabled_Callback()
    • Update to prevent reactivate host interrrupt channel

V1.2.4 / 22-December-2017

+

Main +Changes

  • General updates to fix known defects and enhancements implementation
  • The following changes done on the HAL drivers require an update on the application code based on older HAL versions
    • Rework of HAL CAN driver (compatibility break) 
      • A +new HAL CAN driver has been redesigned with new APIs, to bypass +limitations on CAN Tx/Rx FIFO management present with previous HAL CAN +driver version.
      • The +new HAL CAN driver is the recommended version. It is located as usual +in Drivers/STM32F7xx_HAL_Driver/Src and +Drivers/STM32f7xx_HAL_Driver/Inc folders. It can be enabled through +switch HAL_CAN_MODULE_ENABLED in stm32f7xx_hal_conf.h
      • The +legacy HAL CAN driver is also present in the release in +Drivers/STM32F7xx_HAL_Driver/Src/Legacy and +Drivers/STM32F7xx_HAL_Driver/Inc/Legacy folders for software +compatibility reasons. Its usage is not recommended as deprecated. It +can however be enabled through switch HAL_CAN_LEGACY_MODULE_ENABLED in +stm32f7xx_hal_conf.h
  • HAL update
    • Update HAL driver to allow user to change systick period to 1ms , 10 ms or 100 ms :
      • Add the following API's :  
        • HAL_GetTickPrio() : Returns a tick priority.
        • HAL_SetTickFreq() : Sets new tick frequency.
        • HAL_GetTickFreq() : Returns tick frequency.
      • Add HAL_TickFreqTypeDef enumeration for the different Tick Frequencies : 10 Hz , 100 Hz and 1KHz (default).
  • HAL CAN update
    • Fields of CAN_InitTypeDef structure are reworked:
      • SJW +to SyncJumpWidth, BS1 to TimeSeg1, BS2 to TimeSeg2, TTCM to +TimeTriggeredMode, ABOM to AutoBusOff, AWUM to AutoWakeUp, NART to +AutoRetransmission (inversed), RFLM to ReceiveFifoLocked and TXFP to +TransmitFifoPriority
    • HAL_CAN_Init() is split into both HAL_CAN_Init() and HAL_CAN_Start() API's
    • HAL_CAN_Transmit() +is replaced by HAL_CAN_AddTxMessage() to place Tx Request, then +HAL_CAN_GetTxMailboxesFreeLevel() for polling until completion.
    • HAL_CAN_Transmit_IT() +is replaced by HAL_CAN_ActivateNotification() to enable transmit IT, then +HAL_CAN_AddTxMessage() for place Tx request.
    • HAL_CAN_Receive() +is replaced by HAL_CAN_GetRxFifoFillLevel() for polling until +reception, then HAL_CAN_GetRxMessage()
      to get Rx message.
    • HAL_CAN_Receive_IT() +is replaced by HAL_CAN_ActivateNotification() to enable receive IT, then +HAL_CAN_GetRxMessage()
       in the receivecallback to get Rx message
    • HAL_CAN_Slepp() is renamed as HAL_CAN_RequestSleep()
    • HAL_CAN_TxCpltCallback() is split into HAL_CAN_TxMailbox0CompleteCallback(), HAL_CAN_TxMailbox1CompleteCallback() and HAL_CAN_TxMailbox2CompleteCallback().
    • HAL_CAN_RxCpltCallback is split into HAL_CAN_RxFifo0MsgPendingCallback() and HAL_CAN_RxFifo1MsgPendingCallback().
    • More complete "How to use the new driver" is detailed in the driver header section itself.
  • HAL RCC update
      • Add new LL macro
        • LL_RCC_PLL_SetMainSource() + allowing to configure PLL clock source
      • Add new HAL macros
        • __HAL_RCC_GET_RTC_SOURCE() + allowing to get the RTC clock source
        • __HAL_RCC_GET_RTC_HSE_PRESCALER() + allowing to get the HSE clock divider for RTC peripheral
      • Ensure reset of CIR and CSR + registers when issuing HAL_RCC_DeInit()/LL_RCC_DeInit functions
      • Update HAL_RCC_GetSysClockFreq() + to avoid risk of rounding error which may leads to a wrong returned + value. 
      • Update HAL_RCC_DeInit() +  and LL_RCC_DeInit() APIs to
        • Be able to return HAL/LL + status
        • Add checks for HSI, PLL and + PLLI2S  ready before modifying RCC CFGR registers
        • Clear all interrupt flags
        • Initialize systick interrupt + period
  • HAL DMA update
    • Add clean of callbacks in HAL_DMA_DeInit() API
    • Fix wrong DMA_FLAG_FEIFO_4 and DMA_FLAGDMAEIFO_4 defines values 
  • HAL I2C update
    • Update Interface APIs headers to remove confusing message about device address
    • Update I2C_WaitOnRXNEFlagUntilTimeout() to resolve a race condition between STOPF and RXNE Flags
    • Update I2C_TransferConfig() to fix wrong bit management
  • LL USART update
    • Add assert macros to check USART BaudRate register
  • HAL ETH update
    • Do{..} While(0) insured in multi statement macros :
      • __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() 
      • __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER()
  • HAL FLASH update
    • HAL_FLASH_Unlock() update to return state error when the FLASH is already unlocked
  • HAL GPIO update
    • Add missing define of GPIO_PIN_2 in GPIOK_PIN_AVAILABLE list
  • HAL PCD update
    • Do{..} While(0)  insured in multi statement macros
  • LL UTILS update
    • stm32f7xx_ll_utils.h : Update LL_GetPackageType command to return uint32_t instead of uint16_t
  • HAL TIM update
    • stm32f7xx_hal_tim_ex.c : Update HAL_TIMEx_ConfigBreakDeadTime API to avoid to block timer behavior when
      remains in the state HAL_TIM_STATE_BUSY.
    •  stm32f7xx_hal_tim.h : 
      • Fix __HAL_TIM_SET_PRESCALER() macro
      • Fix typos in some exported macros description 
  • LL FMC update
    • HAL_SDRAM_SendCommand() API: Remove the timeout check
  • HAL NAND update
    • Fix wrong check for NAND status
+

V1.2.3 / 25-August-2017

+

Main +Changes

  • General updates +to fix known defects and enhancements implementation
  • Remove Date and Version from header files
  • Update HAL drivers to refer to the new CMSIS bit position defines instead of usage the POSITION_VAL() macro
  • HAL CAN update
    • Add missing unlock in HAL_CAN_Receive_IT() process
  • HAL DCMI update
    • HAL DCMI driver clean-up: remove non referenced callback APIs: HAL_DCMI_VsyncCallback() and HAL_DCMI_HsyncCallback()
  • HAL DFSDM update
    • Fix cast issue on APIs that return signed integer value (uint32_t) 
  • HAL DMA update
    • HAL DMA driver clean-up: remove non referenced callback APIs: HAL_DMA_CleanCallbacks()
  • HAL FLASH update
    • FLASH_Program_DoubleWord() API: Replace 64-bit accesses with 2 double words operations
  • HAL Generic update
    • Update assert_param() macro definition to be in line with stm32_ll_utils.c driver
  • HAL GPIO update
    • GPIOK_PIN_AVAILABLE() assert macro update to allow possibility to configure GPIO_PIN_2
  • HAL LTDC update
    • Rename HAL_LTDC_LineEvenCallback() API to HAL_LTDC_LineEventCallback()
  • HAL PCD update
    • Update HAL_PCD_IRQHandler() API to fix transfer issues when USB HS is used with DMA enabled
  • HAL RCC update
    • Update HAL_RCC_GetOscConfig() API to:
      • set PLLR in the RCC_OscInitStruct
      • check on null pointer
    • Update HAL_RCC_ClockConfig() API to:
      • check on null pointer
      • optimize code size by updating the handling method of the SWS bits
      • update +to use  __HAL_FLASH_GET_LATENCY() flash macro instead of using +direct register access to LATENCY bits in FLASH ACR register.
  • HAL SAI update
    • Update HAL_SAI_DMAStop() API to flush fifo after disabling SAI
  • HAL TIM update
    • Update HAL_TIMEx_ConfigBreakInput() API to support BKINP/BKIN2P polarity bits.
  • LL DMA update
    • Update +SET_BIT() access to LIFCR and HIFCR registers by WRITE_REG() to avoid +read access that is not allowed when clearing DMA flags
  • LL I2C update
    • Update LL_I2C_Init() API to avoid enabling own address1 when OwnAddress1 parameter value in the I2C_InitStruct is equal to 0.
  • LL TIM update
    • Update LL_TIM_EnableUpdateEvent() API to clear UDIS bit in CR1 register instead of setting it.
    • Update LL_TIM_DisableUpdateEvent() API to set UDIS bit in CR1 register instead of clearing it.
  • LL USB update
    • Update USB_EP0StartXfer() API to fix transfer issues when USB HS is used with DMA enabled

V1.2.2 / 14-April-2017

+

Main +Changes

  • General updates +to fix known defects and enhancements implementation
  • HAL CAN update
    • Add + management of overrun error. 
    • Allow + possibility to receive messages from the 2 RX FIFOs in parallel via + interrupt.
    • Fix message + lost issue with specific sequence of transmit requests.
    • Handle + transmission failure with error callback, when NART is enabled.
    • Add __HAL_CAN_CANCEL_TRANSMIT() call to abort transmission when + timeout is reached

V1.2.1 / 24-March-2017

+

Main +Changes

  • Update CHM UserManuals to support LL drivers
  • General updates +to fix known defects and enhancements implementation
  • HAL DMA update
    • Update HAL_DMA_Init() function to adjust the compatibility check between FIFO threshold and burst configuration
  • HAL MMC update
    • Update HAL_MMC_InitCard() function with proper initialization sequence adding a delay after MMC clock enable
    • Update MMC_DMAError() function ignore DMA FIFO error as not impacting the data transfer
  • HAL SD update
    • Update HAL_SD_InitCard() function with proper initialization sequence adding a delay after SD clock enable
    • Update SD_DMAError() function ignore DMA FIFO error as not impacting the data transfer
  • HAL NAND update
    • Update HAL_NAND_Address_Inc() function implementation for proper plane number check
  • LL SDMMC update
    • Update SDMMC_DATATIMEOUT value with appropriate value needed by reading and writing operations of SD and MMC cards
  • LL RTC update
    • LL_RTC_TIME_Get() and LL_RTC_DATE_Get() inline macros optimization
  • LL ADC update
    • Fix wrong ADC group injected sequence configuration
      • LL_ADC_INJ_SetSequencerRanks() +and LL_ADC_INJ_GetSequencerRanks() API's update to take in +consideration the ADC number of conversions
      • Update the defined values for ADC group injected seqencer ranks 

V1.2.0 / 30-December-2016

+

Main +Changes

  • Official release to add the support of STM32F722xx, STM32F723xx, STM32F732xx and STM32F733xx devices
  • Add Low Layer drivers allowing performance and footprint optimization
    • Low +Layer drivers APIs provide register level programming: require deep +knowledge of peripherals described in STM32F7xx Reference Manuals
    • Low +Layer drivers are available for: ADC, Cortex, CRC, DAC, DMA, +DMA2D, EXTI, GPIO, I2C, IWDG, LPTIM, PWR, RCC, RNG, RTC, SPI, TIM, +USART, WWDG peripherals and additionnal Low Level Bus, System and +Utilities APIs.
    • Low Layer drivers APIs are implemented as static inline function in new Inc/stm32f7xx_ll_ppp.h files for PPP peripherals, there is no configuration file and each stm32f7xx_ll_ppp.h file must be included in user code.
  • General updates +to fix known defects and enhancements implementation
  • Add new HAL MMC and SMBUS drivers
  • HAL Cortex update
    • Move HAL_MPU_Disable() and HAL_MPU_Enable() from stm32f7xx_hal_cortex.h to stm32f7xx_hal_cortex.c
    • Clear the whole MPU control register in HAL_MPU_Disable() API
  • HAL CRYP update
    • Add support of AES
  • HAL DMA update
    • Add a check on DMA stream instance in HAL_DMA_DeInit() API
  • HAL ETH update 
    • Fix wrong definitions in driver header file stm32f7_hal_eth.h
  • HAL FLASH update
    • Support OTP program operation
    • Add the support of PCROP feature
    • Update the clearing of error flags
  • HAL I2C update
    • Align driver source code with other STM32 families
  • HAL JPEG update 
    • Update the output data management when HAL_JPEG_Pause() is performed during the last data sending
  • HAL RCC update
    • Enable PWR only if necessary for LSE configuration in HAL_RCC_OscConfig() API
    • Rename RCC_LPTIM1CLKSOURCE_PCLK define to RCC_LPTIM1CLKSOURCE_PCLK1
    • Rename RCC_DFSDM1CLKSOURCE_PCLK define to RCC_DFSDM1CLKSOURCE_PCLK2
  • HAL SPI update
    • Clear RX FIFO at the end of each transaction
  • HAL UART update
    • Remove USART_CR2_LINEN bit clearing when initializing in synchronous mode
  • HAL USB update
    • Add support of embedded USB PHY Controller
    • Add support of Battery Charging Detector (BCD) feature
  • LL SDMMC update
    • Add new SDMMC_CmdSDEraseStartAdd, SDMMC_CmdSDEraseEndAdd, SDMMC_CmdOpCondition and SDMMC_CmdSwitch functions
  • LL USB update
    • Update PENA bit clearing in OTG_HPRT0 register
  • The following changes done on the HAL drivers require an update on the +application code based on older HAL versions
    • HAL SD update
      • Overall rework of the driver for a more efficient implementation
        • Modify initialization API and structures
        • Modify Read / Write sequences: separate transfer process and SD Cards state management 
        • Adding interrupt mode for Read / Write operations
        • Update the HAL_SD_IRQHandler function by optimizing the management of interrupt errors
      • Refer to the following example to identify the changes: BSP example and USB_Device/MSC_Standalone application
    • HAL TIM update
      • Add new AutoReloadPreload field in TIM_Base_InitTypeDef structure
      • Refer to the TIM examples to identify the changes 
    • HAL NAND update
      • Modify NAND_AddressTypeDef, NAND_DeviceConfigTypeDef and NAND_HandleTypeDef structures fields
      • Add new HAL_NAND_ConfigDevice API

V1.1.1 / 01-July-2016

+

Main +Changes

  • HAL DMA update 
    • Update HAL_DMA_PollForTransfer() function implementation to avoid early TIMEOUT error.
  • HAL JPEG update
    • Update HAL_JPEG_ConfigEncoding() function to properly set the ImageHeight and ImageWidth
  • HAL SPI update
    • Update SPI_DMATransmitReceiveCplt() function to properly handle the CRC and avoid conditional statement duplication

V1.1.0 / 22-April-2016

+

Main +Changes

  • Official release to add the support of STM32F765xx, STM32F767xx, STM32F768xx, STM32F769xx, STM32F777xx, STM32F778xx and STM32F779xx devices
  • General updates +to fix known defects and enhancements implementation
  • Add new HAL drivers for DFSDM, DSI, JPEG and MDIOS peripherals
  • Enhance HAL delay and timebase implementation
    • Add new +drivers stm32f7xx_hal_timebase_tim_template.c, stm32f7xx_hal_timebase_rtc_alarm_template.c and +stm32f7xx_hal_timebase_rtc_wakeup_template.c which override the native HAL time +base functions (defined as weak) to either use the TIM or the RTC as time base tick source. For +more details about the usage of these drivers, please refer to HAL\HAL_TimeBase +examples and FreeRTOS-based applications
  • The following changes done on the HAL drivers require an update on the +application code based on HAL V1.0.4
    • HAL UART, USART, IRDA, SMARTCARD, SPI, I2C, QSPI (referenced as PPP here below) drivers
      • Add PPP error management during DMA process. This requires the following updates on user application:
        • Configure and enable +the PPP IRQ in HAL_PPP_MspInit() function
        • In stm32f7xx_it.c file, +PPP_IRQHandler() +function: add a call to +HAL_PPP_IRQHandler() function +
        • Add and customize +the Error Callback API: HAL_PPP_ErrorCallback()
+
    • HAL I2C (referenced as PPP here below) drivers: +
      • Update to avoid waiting on STOPF/BTF/AF flag under DMA ISR by using the PPP end of transfer interrupt in the DMA transfer process. This requires the following updates on user application:
        • Configure and enable +the PPP IRQ in HAL_PPP_MspInit() function
      +
        • In stm32f7xx_it.c file, +PPP_IRQHandler() +function: add a call to +HAL_PPP_IRQHandler() function
+
    • HAL IWDG driver: rework overall driver for better implementation
      • Remove HAL_IWDG_Start(), HAL_IWDG_MspInit() and HAL_IWDG_GetState() APIs
    • HAL WWDG driver: rework overall driver for better implementation +
      • Remove HAL_WWDG_Start(), HAL_WWDG_Start_IT(), +HAL_WWDG_MspDeInit() and HAL_WWDG_GetState() APIs  +
      • Update the HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t counter)  function and API  by removing the  "counter" parameter
    • HAL QSPI driver:  Enhance the DMA transmit process by using PPP TC interrupt instead of waiting on TC flag under DMA ISR. This requires the following updates on user application:
      • Configure and enable +the QSPI IRQ in HAL_QSPI_MspInit() function
      • In stm32f7xx_it.c file, QSPI_IRQHandler() +function: add a call to +HAL_QSPI_IRQHandler() function
+
    • HAL CEC driver:  Overall driver rework with compatibility break versus previous HAL version
      • Remove HAL CEC polling Process functions: HAL_CEC_Transmit() and HAL_CEC_Receive() +
      • Remove +HAL CEC receive interrupt process function HAL_CEC_Receive_IT() +and enable the "receive"  mode during the Init phase +
      • Rename HAL_CEC_GetReceivedFrameSize() funtion to HAL_CEC_GetLastReceivedFrameSize()
         +
      • Add new HAL APIs: HAL_CEC_SetDeviceAddress() and +HAL_CEC_ChangeRxBuffer() +
      • Remove the 'InitiatorAddress' field from the CEC_InitTypeDef +structure and manage it as a parameter in the HAL_CEC_Transmit_IT() function +
      • Add new parameter 'RxFrameSize' in HAL_CEC_RxCpltCallback() function +
      • Move CEC Rx buffer pointer from CEC_HandleTypeDef structure to +CEC_InitTypeDef structure
  • HAL CAN update 
    • Add the support of CAN3
  • HAL CEC update
    • Overall driver rework with break of compatibility with HAL +V1.0.4
      • Remove the HAL CEC polling Process: HAL_CEC_Transmit() and HAL_CEC_Receive()
+
      • Remove the HAL CEC receive interrupt process (HAL_CEC_Receive_IT()) and manage the "Receive" mode enable within the Init phase +
      • Rename HAL_CEC_GetReceivedFrameSize() function to HAL_CEC_GetLastReceivedFrameSize() function
      • Add new HAL APIs: HAL_CEC_SetDeviceAddress() and +HAL_CEC_ChangeRxBuffer()
      • Remove the 'InitiatorAddress' field from the CEC_InitTypeDef +structure and manage it as a parameter in the HAL_CEC_Transmit_IT() function
      • Add new parameter 'RxFrameSize' in HAL_CEC_RxCpltCallback() function
      • Move CEC Rx buffer pointer from CEC_HandleTypeDef structure to +CEC_InitTypeDef structure
+
    • Update driver to implement the new CEC state machine:
      • Add new "rxState" field in +CEC_HandleTypeDef structure to provide the CEC +state +information related to Rx Operations
      • Rename "state" +field in CEC_HandleTypeDef structure to "gstate": CEC state information +related to global Handle management and Tx Operations +
      • Update CEC process +to manage the new CEC states. +
      • Update __HAL_CEC_RESET_HANDLE_STATE() macro to handle the new CEC +state parameters (gState, rxState)
  • HAL DMA update 
    • Add +new APIs HAL_DMA_RegisterCallback() and HAL_DMA_UnRegisterCallback to +register/unregister the different callbacks identified by +the enum typedef HAL_DMA_CallbackIDTypeDef
    • Add new API HAL_DMA_Abort_IT() to abort DMA transfer under interrupt context
      • The new registered Abort callback is called when DMA transfer abortion is completed
    • Add the check of +compatibility between FIFO threshold level and size of the memory burst in the +HAL_DMA_Init() API +
    • Add new Error Codes: +HAL_DMA_ERROR_PARAM, HAL_DMA_ERROR_NO_XFER and +HAL_DMA_ERROR_NOT_SUPPORTED
    • Remove all DMA states +related to MEM0/MEM1 in HAL_DMA_StateTypeDef
  • HAL DMA2D update 
    • Update the +HAL_DMA2D_DeInit() function to: +
      • Abort transfer in case +of ongoing DMA2D transfer
      +
      • Reset DMA2D control +registers
    • Update +HAL_DMA2D_Abort() to disable DMA2D interrupts after stopping transfer
    • Optimize +HAL_DMA2D_IRQHandler() by reading status registers only once +
    • Update +HAL_DMA2D_ProgramLineEvent() function to: +
      • Return HAL error state +in case of wrong line value
      +
      • Enable line interrupt +after setting the line watermark configuration
    • Add new HAL_DMA2D_CLUTLoad() and HAL_DMA2D_CLUTLoad_IT() +functions to start DMA2D CLUT loading
      • HAL_DMA2D_CLUTLoading_Abort() +function to abort the DMA2D CLUT loading
      • HAL_DMA2D_CLUTLoading_Suspend() +function to suspend the DMA2D CLUT loading
      • HAL_DMA2D_CLUTLoading_Resume() +function to resume the DMA2D CLUT loading
    • Add new DMA2D dead time +management:
      • HAL_DMA2D_EnableDeadTime() +function to enable DMA2D dead time feature
      • HAL_DMA2D_DisableDeadTime() +function to disable DMA2D dead time feature
      • HAL_DMA2D_ConfigDeadTime() +function to configure dead time
    • Update the name of +DMA2D Input/Output color mode defines to be more clear for user (DMA2D_INPUT_XXX +for input layers Colors, DMA2D_OUTPUT_XXX for output framebuffer +Colors)
+ +
  • HAL DCMI update 
    • Rename DCMI_DMAConvCplt +to DCMI_DMAXferCplt +
    • Update HAL_DCMI_Start_DMA() function to Enable the DCMI peripheral +
    • Add new timeout +implementation based on cpu cycles for DCMI stop +
    • Add HAL_DCMI_Suspend() +function to suspend DCMI capture +
    • Add HAL_DCMI_Resume() +function to resume capture after DCMI suspend +
    • Update lock mechanism +for DCMI process +
    • Update HAL_DCMI_IRQHandler() function to: +
      • Add error management in +case DMA errors through XferAbortCallback() and +HAL_DMA_Abort_IT()
      +
      • Optimize code by using +direct register read
    • Move +the content of the stm32f7xx_hal_dcmi_ex.c/.h files to common driver +files (the extension files are kept empty for projects compatibility +reason)
  • HAL FLASH update 
    • Add the support of Dual BANK feature
    • Add __HAL_FLASH_CALC_BOOT_BASE_ADR() macro to calculate the FLASH Boot Base Adress
    • Move Flash total sector define to CMSIS header files
  • HAL FMC update
    • Update FMC_NORSRAM_Init() to remove the Burst access mode configuration
    • Update FMC_SDRAM_Timing_Init() to fix initialization issue when configuring 2 SDRAM banks
  • HAL HCD update
    • Update HCD_Port_IRQHandler() to be compliant with new Time base implementation
  • HAL +I2C update +
    • Add the support of I2C fast mode plus (FM+)
    • Update Polling management:
      • The Timeout value must be estimated for the overall process duration: the Timeout measurement is cumulative
    +
    • Add the management of Abort service: Abort DMA transfer through interrupt
      • In the case of Master Abort IT transfer usage:
        • Add new user HAL_I2C_AbortCpltCallback() to inform user of the end of abort process
        • A new abort state is defined in the HAL_I2C_StateTypeDef structure
    +
    • Add the management of I2C peripheral errors, ACK +failure and STOP condition detection during DMA process. This requires the following updates +on user application:
      • Configure and enable the I2C IRQ in HAL_I2C_MspInit() function
      • In stm32f7xx_it.c file, I2C_IRQHandler() function: add a call to HAL_I2C_IRQHandler() function
      • Add and customize the Error Callback API: HAL_I2C_ErrorCallback()
      • Refer to the I2C_EEPROM or I2C_TwoBoards_ComDMA project examples usage of the API
    • Add the support of I2C repeated start feature: +
      • With the following new APIs
      +
        • HAL_I2C_Master_Sequential_Transmit_IT() +
        • HAL_I2C_Master_Sequential_Receive_IT() +
        • HAL_I2C_Master_Abort_IT() +
        • HAL_I2C_Slave_Sequential_Transmit_IT() +
        • HAL_I2C_Slave_Sequential_Receive_IT() +
        • HAL_I2C_EnableListen_IT() +
        • HAL_I2C_DisableListen_IT()
      +
      • Add new user callbacks:
      +
        • HAL_I2C_ListenCpltCallback()
        • HAL_I2C_AddrCallback()
      +
    • Several +updates on HAL I2C driver to implement the new I2C state machine: +
      • Add new API to get the I2C mode: +HAL_I2C_GetMode() +
      • Update I2C process to +manage the new I2C states
    +
  • HAL IWDG update
    • Overall rework of the driver for a more efficient implementation
      • Remove the following APIs:
        • HAL_IWDG_Start()
        • HAL_IWDG_MspInit()
        • HAL_IWDG_GetState()
      • Update implementation:
        • HAL_IWDG_Init() : this function insures the configuration and the start of the IWDG counter
        • HAL_IWDG_Refresh() : this function insures the reload of the IWDG counter
      • Refer to the following example to identify the changes: IWDG_Example
  • HAL LPTIM update
    • Update HAL_LPTIM_TimeOut_Start_IT() and HAL_LPTIM_Counter_Start_IT( ) APIs +to configure WakeUp Timer EXTI interrupt to be able to wakeup MCU from low power +mode by pressing the EXTI line +
    • Update HAL_LPTIM_TimeOut_Stop_IT() and HAL_LPTIM_Counter_Stop_IT( ) APIs to +disable WakeUp Timer EXTI interrupt
  • HAL LTDC update
    • Update +HAL_LTDC_IRQHandler() to manage the case of reload interrupt
    • Add LTDC extension driver needed with DSI
    • Add HAL_LTDC_SetPitch() function for pitch reconfiguration
    • Add new callback API +HAL_LTDC_ReloadEventCallback() +
    • Add HAL_LTDC_Reload() +to configure LTDC reload feature +
    • Add new No Reload LTDC +variant APIs
       +
      • HAL_LTDC_ConfigLayer_NoReload() +to configure the LTDC Layer according to the specified without reloading +
      • HAL_LTDC_SetWindowSize_NoReload() +to set the LTDC window size without reloading +
      • HAL_LTDC_SetWindowPosition_NoReload() +to set the LTDC window position without reloading +
      • HAL_LTDC_SetPixelFormat_NoReload() +to reconfigure the pixel format without reloading +
      • HAL_LTDC_SetAlpha_NoReload() +to reconfigure the layer alpha value without reloading +
      • HAL_LTDC_SetAddress_NoReload() +to reconfigure the frame buffer Address without reloading +
      • HAL_LTDC_SetPitch_NoReload() +to reconfigure the pitch for specific cases +
      • HAL_LTDC_ConfigColorKeying_NoReload() +to configure the color keying without reloading +
      • HAL_LTDC_EnableColorKeying_NoReload() +to enable the color keying without reloading +
      • HAL_LTDC_DisableColorKeying_NoReload() +to disable the color keying without reloading +
      • HAL_LTDC_EnableCLUT_NoReload() +to enable the color lookup table without reloading +
      • HAL_LTDC_DisableCLUT_NoReload() +to disable the color lookup table without +reloading
      • Note: +Variant functions with _NoReload post fix allows to set the LTDC +configuration/settings without immediate reload. This is useful in case +when the program requires to modify several LTDC settings (on one or +both layers) then applying (reload) these settings in one shot by +calling the function HAL_LTDC_Reload
+
  • HAL NOR update
    • Update NOR_ADDR_SHIFT macro implementation
  • HAL PCD update
    • Update HAL_PCD_IRQHandler() to get HCLK frequency before setting TRDT value
  • HAL QSPI update
    • Update to manage QSPI error management during DMA process
    • Improve the DMA transmit process by using QSPI TC interrupt instead of waiting loop on TC flag under DMA ISR
    • These two improvements require the following updates on user application:
      • Configure and enable the QSPI IRQ in HAL_QSPI_MspInit() function
      • In stm32f7xx_it.c file, QSPI_IRQHandler() function: add a call to HAL_QSPI_IRQHandler() function
      • Add and customize the Error Callback API: HAL_QSPI_ErrorCallback()
    • Add +the management of non-blocking transfer abort service: HAL_QSPI_Abort_IT(). In +this case the user must:
      • Add new callback HAL_QSPI_AbortCpltCallback() to inform user at the end of abort process
      • A new value of State in the HAL_QSPI_StateTypeDef provides the current state during the abort phase
    • Polling management update:
      • The Timeout value user must be estimated for the overall process duration: the Timeout measurement is cumulative. 
    • Refer to the following examples, which describe the changes:
      • QSPI_ReadWrite_DMA
      • QSPI_MemoryMapped
      • QSPI_ExecuteInPlace
    • Add two new APIs for the QSPI fifo threshold: +
      • HAL_QSPI_SetFifoThreshold(): configure the FIFO threshold of +the QSPI +
      • HAL_QSPI_GetFifoThreshold(): give the current FIFO +threshold
      +
    • Fix wrong data size management in HAL_QSPI_Receive_DMA()
  • HAL RCC update
    • Update HAL_RCC_PeriphCLKConfig() function to adjust the SystemCoreClock
    • Optimize HAL_RCC_ClockConfig() function code
    • Optimize internal oscillators and PLL startup times
  • HAL RTC update 
    • Update HAL_RTC_GetTime() with proper 'SubSeconds' and 'SecondFraction' management
  • HAL SAI update 
    • Update SAI state in case of TIMEOUT error within the HAL_SAI_Transmit() / HAL_SAI_Receive() +
    • Update HAL_SAI_IRQHandler: +
      • Add error management in +case DMA errors through XferAbortCallback() and HAL_DMA_Abort_IT() +
      • Add error management in +case of IT
    • Move +SAI_BlockSynchroConfig() and SAI_GetInputClock() functions to +stm32f7xx_hal_sai.c/.h files (extension files are kept empty for +projects compatibility reason)
+
  • HAL SPDIFRX update
    • Overall driver update for wait on flag management optimization
  • HAL SPI update
    • Overall driver optimization to improve performance in polling/interrupt mode to reach maximum peripheral frequency
      • Polling mode: +
        • Replace the use of SPI_WaitOnFlagUnitTimeout() function by "if" +statement to check on RXNE/TXE flage while transferring +data
+
      •  Interrupt mode:
        • Minimize access on SPI registers +
      • All modes:
        • Add the USE_SPI_CRC switch to minimize the number of statements when CRC calculation is disabled
        • Update timeout management to check on global processes
        • Update error code management in all processes
    • Update DMA process: +
      • Add the management of SPI peripheral errors during DMA process. This requires the following updates in +the user application:
        • Configure and enable the SPI IRQ in HAL_SPI_MspInit() function
        • In stm32f7xx_it.c file, SPI_IRQHandler() function: add a call to HAL_SPI_IRQHandler() function
        • Add and customize the Error Callback API: HAL_SPI_ErrorCallback()
        • Refer to the following example which describe the changes: SPI_FullDuplex_ComDMA
      +
  • HAL TIM update 
    • Update HAL_TIM_ConfigOCrefClear() function for proper configuration of the SMCR register
    • Add new function HAL_TIMEx_ConfigBreakInput() to configure the break input source
  • HAL UART, USART, SMARTCARD and IRDA (referenced as PPP here below) update +
    • Update Polling management:
      • The user Timeout value must be estimated for the overall process duration: the Timeout measurement is cumulative
    • Update DMA process:
      • Update the management of PPP peripheral errors during DMA process. This requires the following updates in user application:
        • Configure and enable the PPP IRQ in HAL_PPP_MspInit() function
        • In stm32f7xx_it.c file, PPP_IRQHandler() function: add a call to HAL_PPP_IRQHandler() function
        • Add and customize the Error Callback API: HAL_PPP_ErrorCallback()
  • HAL WWDG update 
    • Overall rework of the driver for more efficient implementation
      • Remove the following APIs:
        • HAL_WWDG_Start()
        • HAL_WWDG_Start_IT()
        • HAL_WWDG_MspDeInit()
        • HAL_WWDG_GetState()
      • Update implementation:
        • HAL_WWDG_Init()
          • A new parameter in the Init Structure: EWIMode
        • HAL_WWDG_MspInit()
        • HAL_WWDG_Refresh() 
          • This function insures the reload of the counter
          • The "counter" parameter has been removed
        • HAL_WWDG_IRQHandler()
        • HAL_WWDG_EarlyWakeupCallback() is the new prototype of HAL_WWDG_WakeupCallback()
    • Refer to the following example to identify the changes: WWDG_Example

V1.0.4 / 09-December-2015

+

Main +Changes

  • HAL Generic update
    • Update HAL +weak empty callbacks to prevent unused argument compilation warnings with some +compilers by calling the following line: +
      • UNUSED(hppp);
  • HAL ETH update 
    • Update HAL_ETH_Init() function to add timeout on the Software reset management

V1.0.3 / 13-November-2015

+

Main +Changes

  • General updates +to fix known defects and enhancements implementation
  • One change done on the HAL CRYP requires an update on +the application code based on HAL V1.0.2 +
    • Update +HAL_CRYP_DESECB_Decrypt() API to invert pPlainData and pCypherData +parameters
  • HAL Generic update
    • Update HAL +weak empty callbacks to prevent unused argument compilation warnings with some +compilers by calling the following line: +
      • UNUSED(hppp);
    • Remove references to STM32CubeMX and MicroXplorer from stm32f7xx_hal_msp_template.c file
  • HAL ADC update
    • Replace ADC_CHANNEL_TEMPSENSOR definition from ADC_CHANNEL_16 to ADC_CHANNEL_18  
    • Update HAL ADC driver state machine for code efficiency
    • Add new literal: ADC_INJECTED_SOFTWARE_START to be used as possible +value for the ExternalTrigInjecConvEdge parameter in the ADC_InitTypeDef +structure to select the ADC software trigger mode.
  • HAL CORTEX update +
    • Remove duplication +for __HAL_CORTEX_SYSTICKCLK_CONFIG() macro
  • HAL CRYP update
    • Update HAL_CRYP_DESECB_Decrypt() API to fix the inverted pPlainData and pCypherData parameters issue
  • HAL FLASH update
    • Update OB_IWDG_STOP_ACTIVE definition
    • Update OB_RDP_LEVEL_x definition by proper values
    • Update FLASH_MassErase() function to consider the voltage range parameter in the mass erase configuration
  • HAL RCC update
    • update values for LSE Drive capability defines
    • update PLLN min value 50 instead of 100
    • add RCC_PLLI2SP_DIVx defines for PLLI2SP clock divider
    • Update __HAL_RCC_USB_OTG_FS_CLK_DISABLE() macro to remove the disable of the SYSCFG 
    • Update HAL_RCCEx_GetPeriphCLKFreq() function for proper SAI clock configuration
  • HAL SAI update
    • update for proper management of the external synchronization input selection
      • update of HAL_SAI_Init () funciton
      • update definition of SAI_Block_SyncExt and SAI_Block_Synchronization groups
    • update SAI_SLOTACTIVE_X  defines values
    • update HAL_SAI_Init() function for proper companding mode management
    • update SAI_Transmit_ITxxBit() functions to add the check on transfer counter before writing new data to SAIx_DR registers
    • update SAI_FillFifo() function to avoid issue when the number of data to transmit is smaller than the FIFO size
    • update HAL_SAI_EnableRxMuteMode() function for proper mute management
    • update SAI_InitPCM() function to support 24bits configuration
  • HAL SD update
    • update HAL_SD_Get_CardInfo() to properly support high capacity cards
  • HAL SPDIFRX update
    • update SPDIFRX_DMARxCplt() function implementation to check on circular mode before disabling the DMA
  • HAL TIM update
    • Update HAL_TIM_ConfigClockSource() function implementation for proper parameters check
  • HAL UART update
    • Update __HAL_UART_CLEAR_IT macro for proper functionning 
  • ll FMC update
    • add FMC_PAGE_SIZE_512 define
  • ll SDMMC update
    • update SDMMC_SetSDMMCReadWaitMode() function for proper functionning

V1.0.2 / 21-September-2015

+

Main +Changes

  • HAL Generic update
    • stm32f7xx_hal.conf_template.h: update HSE_STARTUP_TIMEOUT
    • stm32f7xx_hal_def.h: update the quotation marks used in #error"USE_RTOS should be 0 in the current HAL release"
  • HAL DMA update
    • Overall +driver update for code optimization
      • add +StreamBaseAddress and StreamIndex new fields in the DMA_HandleTypeDef +structure +
      • add +DMA_Base_Registers private structure +
      • add static function +DMA_CalcBaseAndBitshift() +
      • update +HAL_DMA_Init() function to use the new added static function +
      • update +HAL_DMA_DeInit() function to optimize clear flag operations +
      • update +HAL_DMA_Start_IT() function to optimize interrupts enable +
      • update +HAL_DMA_PollForTransfer() function to optimize check on flags +
      • update +HAL_DMA_IRQHandler() function to optimize interrupt flag management
  • HAL ETH update
    • remove duplicated macro IS_ETH_RX_MODE()
  • HAL GPIO update
    • Rename +GPIO_SPEED_LOW define to GPIO_SPEED_FREQ_LOW +
    • Rename +GPIO_SPEED_MEDIUM define to GPIO_SPEED_FREQ_MEDIUM +
    • Rename +GPIO_SPEED_FAST define to GPIO_SPEED_FREQ_HIGH +
    • Rename +GPIO_SPEED_HIGH define to GPIO_SPEED_FREQ_VERY_HIGH
  • HAL HASH update
    • Rename +HAL_HASH_STATETypeDef to HAL_HASH_StateTypeDef +
    • Rename +HAL_HASH_PhaseTypeDef to HAL_HASHPhaseTypeDef
  • HAL RCC update
    • update values for LSE Drive capability defines
    • update PLLN/PLLI2SN/PLLSAI VCO min value 100MHz instead of 192MHz
    • add __HAL_RCC_MCO1_CONFIG() and __HAL_RCC_MCO2_CONFIG() macros
    • update HAL_RCCEx_PeriphCLKConfig() function to reset the Backup domain only if the RTC Clock source selection is modified 
  • HAL TIM update
    • update the implementation of __HAL_TIM_SET_COMPARE() macro
    • remove useless assert() in HAL_TIM_PWM_ConfigChannel(), TIM_OC2_SetConfig() and HAL_TIM_PWM_ConfigChannel() functions
  • HAL CAN update
    • add the clear flag ERRI bit in HAL_CAN_IRQHandler()
  • HAL I2S update
    • update I2S HAL_I2S_Transmit() API to keep the check on busy flag only for the slave
  • HAL QSPI update
    • Add __HAL_QSPI_CLEAR_FLAG() before QSPI_Config()
  • HAL UART update
    • Remove +enabling of ERR IT source and PE source from HAL_UART_Transmit_IT() and +remove the corresponding disabling ERR/PE IT from UART_EndTransmit_IT()
  • HAL PCD update 
    • Clean status phase received interrupt when DMA mode enabled 
  • HAL HCD update
    • Update to use local +variable in USB Host channel re-activation
  • ll FMC update
    • update the define FMC Write FIFO Disable/Enable: FMC_WRITE_FIFO_DISABLE and FMC_WRITE_FIFO_ENABLE
    • remove return HAL_ERROR from FMC_SDRAM_SendCommand() function

V1.0.1 / 25-June-2015

+

Main +Changes

  • General updates +to fix known defects and enhancements implementation
  • HAL CRC update
    • update __HAL_CRC_SET_IDR() macro implementation to use WRITE_REG() instead of MODIFY_REG()
  • HAL CEC update
    • update timeout management in HAL_CEC_Transmit() and HAL_CEC_Receive() functions
  • HAL Cortex update
    • update HAL_MPU_ConfigRegion() function to be misra compliant
  • HAL ETH update
    • Remove +duplicated IS_ETH_DUPLEX_MODE() and IS_ETH_RX_MODE() macros
    • Remove +illegal space ETH_MAC_READCONTROLLER_FLUSHING macro
    • Update +ETH_MAC_READCONTROLLER_XXX defined values (XXX can be IDLE, READING_DATA and +READING_STATUS)
  • HAL FLASH update
    • update FLASH_OB_GetRDP() function to return uint8_t  instead of FlagStatus
    • update OB_RDP_LEVELx definition
    • add __HAL_FLASH_GET_LATENCY() macro
  • HAL HASH update
    • update +HASH_DMAXferCplt() and HASHEx_DMAXferCplt() functions to properly +configure the number of valid bits in last word of the message
    • update HAL_HASH_SHA1_Accumulate() function to check on the length of the input buffer
    • update +HAL_HASH_MODE_Start_IT() functions (Mode stands for MD5, SHA1, SHA224 and SHA256 ) to :
      • Fix processing +fail for small input buffers +
      • to unlock +the process and call return HAL_OK at the end of HASH processing to avoid +incorrect repeating software +
      • properly to manage +the HashITCounter efficiency +
      • Update to call the +HAL_HASH_InCpltCallback() at the end of the complete buffer instead +of +every each 512 bits
    • update HASH_IT_DINI and HASH_IT_DCI definition
    • update __HAL_HASH_GET_FLAG() macro definition
  • HAL I2S update
    • update HAL_I2S_Transmit() function to ensure the waiting on Busy flag in case of slave mode selection
  • HAL RTC update
    • update HAL_RTCEx_SetWakeUpTimer() and HAL_RTCEx_SetWakeUpTimer_IT() functions to properly check on WUTWF flag
    • rename RTC_TIMESTAMPPIN_PI8 define to RTC_TIMESTAMPPIN_POS1
    • rename RTC_TIMESTAMPPIN_PC1 define to RTC_TIMESTAMPPIN_POS2
    • update __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG() macro definition
    • update __HAL_RTC_TAMPER_GET_IT() macro definition
    • update __HAL_RTC_TAMPER_CLEAR_FLAG() macro definition
    • update __HAL_RTC_TIMESTAMP_CLEAR_FLAG() macro definition
    • update __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() macro definition
    • add RTC_TAMPCR_TAMPXE and RTC_TAMPCR_TAMPXIE defines
  • HAL SMARTCARD update
    • add SMARTCARD_FLAG_IDLE, SMARTCARD_IT_IDLE and  SMARTCARD_CLEAR_IDLEF defines
  • HAL UART update
    • update HAL_UART_DMAResume() function to clear overrun flag before resuming the Rx transfer
    • update UART_FLAG_SBKF definition
  • HAL USART update
    • update HAL_USART_DMAResume() function to clear overrun flag before resuming the Rx transfer
  • LL FMC update
    • update NAND timing maximum values
  • LL USB update +
    • USB_FlushTxFifo API: +update to flush all Tx FIFO +
    • Update to use local +variable in USB Host channel re-activation
+ +

V1.0.0 / 12-May-2015

+

Main +Changes

  • First official release for STM32F756xx/746xx/745xx +devices
+ +

License

+
+
Redistribution +and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met:
+ +
    +
  1. Redistributions +of source code must retain the above copyright notice, this list of +conditions and the following disclaimer.
    2. +
  2. Redistributions +in binary form must reproduce the above copyright notice, this list of +conditions and the following disclaimer in the +documentation and/or other materials provided with the distribution.
    3. +
  3. Neither the +name of STMicroelectronics nor the names of its contributors may be +used to endorse or promote products derived
    +
    4. +
+       +from this software without specific prior written permission.
+
+THIS +SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, +INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR +CONTRIBUTORS BE LIABLE FOR ANY DIRECT, +INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR +BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +THE POSSIBILITY OF SUCH DAMAGE.
+
+ +
+
+

For +complete documentation on STM32 Microcontrollers visit www.st.com/STM32

+
+

+
+
+

 

+
+ \ No newline at end of file diff --git a/bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Src/Legacy/stm32f7xx_hal_can.c b/bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Src/Legacy/stm32f7xx_hal_can.c new file mode 100644 index 000000000..33c70e933 --- /dev/null +++ b/bsp/stm32/libraries/STM32F7xx_HAL/STM32F7xx_HAL_Driver/Src/Legacy/stm32f7xx_hal_can.c @@ -0,0 +1,1688 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_can.c + * @author MCD Application Team + * @brief CAN HAL module driver. + * This file provides firmware functions to manage the following + * functionalities of the Controller Area Network (CAN) peripheral: + * + Initialization and de-initialization functions + * + IO operation functions + * + Peripheral Control functions + * + Peripheral State and Error functions + * + @verbatim + ============================================================================== + ##### User NOTE ##### + ============================================================================== + [..] + (#) This HAL CAN driver is deprecated, it contains some CAN Tx/Rx FIFO management limitations. + Another HAL CAN driver version has been designed with new API's, to fix these limitations. + + ============================================================================== + ##### How to use this driver ##### + ============================================================================== + [..] + (#) Enable the CAN controller interface clock using + __HAL_RCC_CAN1_CLK_ENABLE() for CAN1, __HAL_RCC_CAN2_CLK_ENABLE() for CAN2 + and __HAL_RCC_CAN3_CLK_ENABLE() for CAN3 + -@- In case you are using CAN2 only, you have to enable the CAN1 clock. + + (#) CAN pins configuration + (++) Enable the clock for the CAN GPIOs using the following function: + __HAL_RCC_GPIOx_CLK_ENABLE() + (++) Connect and configure the involved CAN pins to AF9 using the + following function HAL_GPIO_Init() + + (#) Initialize and configure the CAN using HAL_CAN_Init() function. + + (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function. + + (#) Or transmit the desired CAN frame using HAL_CAN_Transmit_IT() function. + + (#) Receive a CAN frame using HAL_CAN_Receive() function. + + (#) Or receive a CAN frame using HAL_CAN_Receive_IT() function. + + *** Polling mode IO operation *** + ================================= + [..] + (+) Start the CAN peripheral transmission and wait the end of this operation + using HAL_CAN_Transmit(), at this stage user can specify the value of timeout + according to his end application + (+) Start the CAN peripheral reception and wait the end of this operation + using HAL_CAN_Receive(), at this stage user can specify the value of timeout + according to his end application + + *** Interrupt mode IO operation *** + =================================== + [..] + (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT() + (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT() + (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine + (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can + add his own code by customization of function pointer HAL_CAN_TxCpltCallback + (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can + add his own code by customization of function pointer HAL_CAN_ErrorCallback + + *** CAN HAL driver macros list *** + ============================================= + [..] + Below the list of most used macros in CAN HAL driver. + + (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts + (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts + (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled + (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags + (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status + + [..] + (@) You can refer to the CAN Legacy HAL driver header file for more useful macros + + @endverbatim + + ****************************************************************************** + * @attention + * + *

© COPYRIGHT(c) 2017 STMicroelectronics

+ * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @defgroup CAN CAN + * @brief CAN driver modules + * @{ + */ + +#ifdef HAL_CAN_LEGACY_MODULE_ENABLED +#ifdef HAL_CAN_MODULE_ENABLED +/* Select HAL CAN module in stm32f7xx_hal_conf.h file: + (#) HAL_CAN_MODULE_ENABLED for new HAL CAN driver fixing FIFO limitations + (#) HAL_CAN_LEGACY_MODULE_ENABLED for legacy HAL CAN driver */ +#error 'The HAL CAN driver cannot be used with its legacy, Please ensure to enable only one HAL CAN module at once in stm32f7xx_hal_conf.h file' +#endif /* HAL_CAN_MODULE_ENABLED */ + +#warning 'Legacy HAL CAN driver is enabled! It can be used with known limitations, refer to the release notes. However it is recommended to use rather the new HAL CAN driver' + +/* Private typedef -----------------------------------------------------------*/ +/* Private define ------------------------------------------------------------*/ +/** @addtogroup CAN_Private_Constants + * @{ + */ +#define CAN_TIMEOUT_VALUE 10U +/** + * @} + */ +/* Private macro -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private function prototypes -----------------------------------------------*/ +/** @addtogroup CAN_Private_Functions + * @{ + */ +static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber); +static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan); +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup CAN_Exported_Functions CAN Exported Functions + * @{ + */ + +/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions + * @brief Initialization and Configuration functions + * +@verbatim + ============================================================================== + ##### Initialization and de-initialization functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Initialize and configure the CAN. + (+) De-initialize the CAN. + +@endverbatim + * @{ + */ + +/** + * @brief Initializes the CAN peripheral according to the specified + * parameters in the CAN_InitStruct. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan) +{ + uint32_t InitStatus = CAN_INITSTATUS_FAILED; + uint32_t tickstart = 0U; + + /* Check CAN handle */ + if(hcan == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance)); + assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM)); + assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM)); + assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM)); + assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART)); + assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM)); + assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP)); + assert_param(IS_CAN_MODE(hcan->Init.Mode)); + assert_param(IS_CAN_SJW(hcan->Init.SJW)); + assert_param(IS_CAN_BS1(hcan->Init.BS1)); + assert_param(IS_CAN_BS2(hcan->Init.BS2)); + assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler)); + + + if(hcan->State == HAL_CAN_STATE_RESET) + { + /* Allocate lock resource and initialize it */ + hcan->Lock = HAL_UNLOCKED; + /* Init the low level hardware */ + HAL_CAN_MspInit(hcan); + } + + /* Initialize the CAN state*/ + hcan->State = HAL_CAN_STATE_BUSY; + + /* Exit from sleep mode */ + hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP); + + /* Request initialisation */ + hcan->Instance->MCR |= CAN_MCR_INRQ ; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait the acknowledge */ + while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE) + { + hcan->State= HAL_CAN_STATE_TIMEOUT; + /* Process unlocked */ + __HAL_UNLOCK(hcan); + return HAL_TIMEOUT; + } + } + + /* Check acknowledge */ + if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + /* Set the time triggered communication mode */ + if (hcan->Init.TTCM == ENABLE) + { + hcan->Instance->MCR |= CAN_MCR_TTCM; + } + else + { + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM; + } + + /* Set the automatic bus-off management */ + if (hcan->Init.ABOM == ENABLE) + { + hcan->Instance->MCR |= CAN_MCR_ABOM; + } + else + { + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM; + } + + /* Set the automatic wake-up mode */ + if (hcan->Init.AWUM == ENABLE) + { + hcan->Instance->MCR |= CAN_MCR_AWUM; + } + else + { + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM; + } + + /* Set the no automatic retransmission */ + if (hcan->Init.NART == ENABLE) + { + hcan->Instance->MCR |= CAN_MCR_NART; + } + else + { + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART; + } + + /* Set the receive FIFO locked mode */ + if (hcan->Init.RFLM == ENABLE) + { + hcan->Instance->MCR |= CAN_MCR_RFLM; + } + else + { + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM; + } + + /* Set the transmit FIFO priority */ + if (hcan->Init.TXFP == ENABLE) + { + hcan->Instance->MCR |= CAN_MCR_TXFP; + } + else + { + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP; + } + + /* Set the bit timing register */ + hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \ + ((uint32_t)hcan->Init.SJW) | \ + ((uint32_t)hcan->Init.BS1) | \ + ((uint32_t)hcan->Init.BS2) | \ + ((uint32_t)hcan->Init.Prescaler - 1U); + + /* Request leave initialisation */ + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait the acknowledge */ + while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK) + { + if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE) + { + hcan->State= HAL_CAN_STATE_TIMEOUT; + /* Process unlocked */ + __HAL_UNLOCK(hcan); + return HAL_TIMEOUT; + } + } + + /* Check acknowledged */ + if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK) + { + InitStatus = CAN_INITSTATUS_SUCCESS; + } + } + + if(InitStatus == CAN_INITSTATUS_SUCCESS) + { + /* Set CAN error code to none */ + hcan->ErrorCode = HAL_CAN_ERROR_NONE; + + /* Initialize the CAN state */ + hcan->State = HAL_CAN_STATE_READY; + + /* Return function status */ + return HAL_OK; + } + else + { + /* Initialize the CAN state */ + hcan->State = HAL_CAN_STATE_ERROR; + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Configures the CAN reception filter according to the specified + * parameters in the CAN_FilterInitStruct. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @param sFilterConfig pointer to a CAN_FilterConfTypeDef structure that + * contains the filter configuration information. + * @retval None + */ +HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig) +{ + uint32_t filternbrbitpos = 0U; + CAN_TypeDef *can_ip; + +#if !defined(CAN3) + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcan); +#endif /* CAN3 */ + + /* Check the parameters */ + assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber)); + assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode)); + assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale)); + assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment)); + assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation)); + assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber)); + + filternbrbitpos = 1U << sFilterConfig->FilterNumber; +#if defined (CAN3) + /* Check the CAN instance */ + if(hcan->Instance == CAN3) + { + can_ip = CAN3; + } + else + { + can_ip = CAN1; + } +#else + can_ip = CAN1; +#endif + + /* Initialisation mode for the filter */ + can_ip->FMR |= (uint32_t)CAN_FMR_FINIT; + +#if defined (CAN2) + /* Select the start slave bank */ + can_ip->FMR &= ~((uint32_t)CAN_FMR_CAN2SB); + can_ip->FMR |= (uint32_t)(sFilterConfig->BankNumber << 8U); +#endif + + /* Filter Deactivation */ + can_ip->FA1R &= ~(uint32_t)filternbrbitpos; + + /* Filter Scale */ + if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT) + { + /* 16-bit scale for the filter */ + can_ip->FS1R &= ~(uint32_t)filternbrbitpos; + + /* First 16-bit identifier and First 16-bit mask */ + /* Or First 16-bit identifier and Second 16-bit identifier */ + can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR1 = + ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16U) | + (0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow); + + /* Second 16-bit identifier and Second 16-bit mask */ + /* Or Third 16-bit identifier and Fourth 16-bit identifier */ + can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR2 = + ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) | + (0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh); + } + + if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT) + { + /* 32-bit scale for the filter */ + can_ip->FS1R |= filternbrbitpos; + + /* 32-bit identifier or First 32-bit identifier */ + can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR1 = + ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdHigh) << 16U) | + (0x0000FFFFU & (uint32_t)sFilterConfig->FilterIdLow); + /* 32-bit mask or Second 32-bit identifier */ + can_ip->sFilterRegister[sFilterConfig->FilterNumber].FR2 = + ((0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16U) | + (0x0000FFFFU & (uint32_t)sFilterConfig->FilterMaskIdLow); + } + + /* Filter Mode */ + if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK) + { + /*Id/Mask mode for the filter*/ + can_ip->FM1R &= ~(uint32_t)filternbrbitpos; + } + else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ + { + /*Identifier list mode for the filter*/ + can_ip->FM1R |= (uint32_t)filternbrbitpos; + } + + /* Filter FIFO assignment */ + if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0) + { + /* FIFO 0 assignation for the filter */ + can_ip->FFA1R &= ~(uint32_t)filternbrbitpos; + } + + if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1) + { + /* FIFO 1 assignation for the filter */ + can_ip->FFA1R |= (uint32_t)filternbrbitpos; + } + + /* Filter activation */ + if (sFilterConfig->FilterActivation == ENABLE) + { + can_ip->FA1R |= filternbrbitpos; + } + + /* Leave the initialisation mode for the filter */ + can_ip->FMR &= ~((uint32_t)CAN_FMR_FINIT); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Deinitializes the CANx peripheral registers to their default reset values. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan) +{ + /* Check CAN handle */ + if(hcan == NULL) + { + return HAL_ERROR; + } + + /* Check the parameters */ + assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance)); + + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_BUSY; + + /* DeInit the low level hardware */ + HAL_CAN_MspDeInit(hcan); + + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_RESET; + + /* Release Lock */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Initializes the CAN MSP. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval None + */ +__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CAN_MspInit could be implemented in the user file + */ +} + +/** + * @brief DeInitializes the CAN MSP. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval None + */ +__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CAN_MspDeInit could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CAN_Exported_Functions_Group2 IO operation functions + * @brief IO operation functions + * +@verbatim + ============================================================================== + ##### IO operation functions ##### + ============================================================================== + [..] This section provides functions allowing to: + (+) Transmit a CAN frame message. + (+) Receive a CAN frame message. + (+) Enter CAN peripheral in sleep mode. + (+) Wake up the CAN peripheral from sleep mode. + +@endverbatim + * @{ + */ + +/** + * @brief Initiates and transmits a CAN frame message. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout) +{ + uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX; + uint32_t tickstart = 0U; + + /* Check the parameters */ + assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE)); + assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR)); + assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC)); + + if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \ + ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \ + ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)) + { + /* Process locked */ + __HAL_LOCK(hcan); + + /* Change CAN state */ + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_RX0): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0; + break; + case(HAL_CAN_STATE_BUSY_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX1; + break; + case(HAL_CAN_STATE_BUSY_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1; + break; + default: /* HAL_CAN_STATE_READY */ + hcan->State = HAL_CAN_STATE_BUSY_TX; + break; + } + + /* Select one empty transmit mailbox */ + if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmitmailbox = CAN_TXMAILBOX_0; + } + else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmitmailbox = CAN_TXMAILBOX_1; + } + else + { + transmitmailbox = CAN_TXMAILBOX_2; + } + + /* Set up the Id */ + hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ; + if (hcan->pTxMsg->IDE == CAN_ID_STD) + { + assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId)); + hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \ + hcan->pTxMsg->RTR); + } + else + { + assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId)); + hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \ + hcan->pTxMsg->IDE | \ + hcan->pTxMsg->RTR); + } + + /* Set up the DLC */ + hcan->pTxMsg->DLC &= (uint8_t)0x0000000F; + hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0U; + hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC; + + /* Set up the data field */ + hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) | + ((uint32_t)hcan->pTxMsg->Data[2U] << 16U) | + ((uint32_t)hcan->pTxMsg->Data[1U] << 8U) | + ((uint32_t)hcan->pTxMsg->Data[0U])); + hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) | + ((uint32_t)hcan->pTxMsg->Data[6U] << 16U) | + ((uint32_t)hcan->pTxMsg->Data[5U] << 8U) | + ((uint32_t)hcan->pTxMsg->Data[4U])); + /* Request transmission */ + hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check End of transmission flag */ + while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox))) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hcan->State = HAL_CAN_STATE_TIMEOUT; + __HAL_CAN_CANCEL_TRANSMIT(hcan, transmitmailbox); + /* Process unlocked */ + __HAL_UNLOCK(hcan); + return HAL_TIMEOUT; + } + } + } + + /* Change CAN state */ + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX_RX0): + hcan->State = HAL_CAN_STATE_BUSY_RX0; + break; + case(HAL_CAN_STATE_BUSY_TX_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1; + break; + default: /* HAL_CAN_STATE_BUSY_TX */ + hcan->State = HAL_CAN_STATE_READY; + break; + } + + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_OK; + } + else + { + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_ERROR; + + /* Return function status */ + return HAL_ERROR; + } +} + +/** + * @brief Initiates and transmits a CAN frame message. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan) +{ + uint32_t transmitmailbox = CAN_TXSTATUS_NOMAILBOX; + + /* Check the parameters */ + assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE)); + assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR)); + assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC)); + + if(((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) || \ + ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) || \ + ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)) + { + /* Process Locked */ + __HAL_LOCK(hcan); + + /* Select one empty transmit mailbox */ + if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0) + { + transmitmailbox = CAN_TXMAILBOX_0; + } + else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1) + { + transmitmailbox = CAN_TXMAILBOX_1; + } + else + { + transmitmailbox = CAN_TXMAILBOX_2; + } + + /* Set up the Id */ + hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ; + if(hcan->pTxMsg->IDE == CAN_ID_STD) + { + assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId)); + hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21U) | \ + hcan->pTxMsg->RTR); + } + else + { + assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId)); + hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3U) | \ + hcan->pTxMsg->IDE | \ + hcan->pTxMsg->RTR); + } + + /* Set up the DLC */ + hcan->pTxMsg->DLC &= (uint8_t)0x0000000F; + hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= 0xFFFFFFF0U; + hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC; + + /* Set up the data field */ + hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3U] << 24U) | + ((uint32_t)hcan->pTxMsg->Data[2U] << 16U) | + ((uint32_t)hcan->pTxMsg->Data[1U] << 8U) | + ((uint32_t)hcan->pTxMsg->Data[0U])); + hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7U] << 24U) | + ((uint32_t)hcan->pTxMsg->Data[6U] << 16U) | + ((uint32_t)hcan->pTxMsg->Data[5U] << 8U) | + ((uint32_t)hcan->pTxMsg->Data[4U])); + + /* Change CAN state */ + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_RX0): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0; + break; + case(HAL_CAN_STATE_BUSY_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX1; + break; + case(HAL_CAN_STATE_BUSY_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1; + break; + default: /* HAL_CAN_STATE_READY */ + hcan->State = HAL_CAN_STATE_BUSY_TX; + break; + } + + /* Set CAN error code to none */ + hcan->ErrorCode = HAL_CAN_ERROR_NONE; + + /* Process Unlocked */ + __HAL_UNLOCK(hcan); + + /* Request transmission */ + hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ; + + /* Enable Error warning, Error passive, Bus-off, + Last error and Error Interrupts */ + __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG | + CAN_IT_EPV | + CAN_IT_BOF | + CAN_IT_LEC | + CAN_IT_ERR | + CAN_IT_TME); + } + else + { + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_ERROR; + + /* Return function status */ + return HAL_ERROR; + } + + return HAL_OK; +} + +/** + * @brief Receives a correct CAN frame. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @param FIFONumber FIFO Number value + * @param Timeout Specify Timeout value + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout) +{ + uint32_t tickstart = 0U; + CanRxMsgTypeDef* pRxMsg = NULL; + + /* Check the parameters */ + assert_param(IS_CAN_FIFO(FIFONumber)); + + /* Check if CAN state is not busy for RX FIFO0 */ + if ((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \ + (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1))) + { + return HAL_BUSY; + } + + /* Check if CAN state is not busy for RX FIFO1 */ + if ((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1))) + { + return HAL_BUSY; + } + + /* Process locked */ + __HAL_LOCK(hcan); + + /* Change CAN state */ + if (FIFONumber == CAN_FIFO0) + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0; + break; + case(HAL_CAN_STATE_BUSY_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1; + break; + default: /* HAL_CAN_STATE_READY */ + hcan->State = HAL_CAN_STATE_BUSY_RX0; + break; + } + } + else /* FIFONumber == CAN_FIFO1 */ + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX1; + break; + case(HAL_CAN_STATE_BUSY_RX0): + hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1; + break; + default: /* HAL_CAN_STATE_READY */ + hcan->State = HAL_CAN_STATE_BUSY_RX1; + break; + } + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Check pending message */ + while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0U) + { + /* Check for the Timeout */ + if(Timeout != HAL_MAX_DELAY) + { + if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout)) + { + hcan->State = HAL_CAN_STATE_TIMEOUT; + /* Process unlocked */ + __HAL_UNLOCK(hcan); + return HAL_TIMEOUT; + } + } + } + + /* Set RxMsg pointer */ + if(FIFONumber == CAN_FIFO0) + { + pRxMsg = hcan->pRxMsg; + } + else /* FIFONumber == CAN_FIFO1 */ + { + pRxMsg = hcan->pRx1Msg; + } + + /* Get the Id */ + pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; + if (pRxMsg->IDE == CAN_ID_STD) + { + pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U); + } + else + { + pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U); + } + + pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FMI */ + pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U); + /* Get the FIFONumber */ + pRxMsg->FIFONumber = FIFONumber; + /* Get the data field */ + pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR; + pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U); + pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U); + pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U); + pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR; + pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U); + pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U); + pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U); + + /* Release the FIFO */ + if(FIFONumber == CAN_FIFO0) + { + /* Release FIFO0 */ + __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0); + } + else /* FIFONumber == CAN_FIFO1 */ + { + /* Release FIFO1 */ + __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1); + } + + /* Change CAN state */ + if (FIFONumber == CAN_FIFO0) + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX_RX0): + hcan->State = HAL_CAN_STATE_BUSY_TX; + break; + case(HAL_CAN_STATE_BUSY_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX1; + break; + default: /* HAL_CAN_STATE_BUSY_RX0 */ + hcan->State = HAL_CAN_STATE_READY; + break; + } + } + else /* FIFONumber == CAN_FIFO1 */ + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX; + break; + case(HAL_CAN_STATE_BUSY_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX0; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0; + break; + default: /* HAL_CAN_STATE_BUSY_RX1 */ + hcan->State = HAL_CAN_STATE_READY; + break; + } + } + + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Receives a correct CAN frame. + * @param hcan Pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @param FIFONumber Specify the FIFO number + * @retval HAL status + */ +HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber) +{ + /* Check the parameters */ + assert_param(IS_CAN_FIFO(FIFONumber)); + + /* Check if CAN state is not busy for RX FIFO0 */ + if((FIFONumber == CAN_FIFO0) && ((hcan->State == HAL_CAN_STATE_BUSY_RX0) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0) || \ + (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1))) + { + return HAL_BUSY; + } + + /* Check if CAN state is not busy for RX FIFO1 */ + if((FIFONumber == CAN_FIFO1) && ((hcan->State == HAL_CAN_STATE_BUSY_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_RX0_RX1) || \ + (hcan->State == HAL_CAN_STATE_BUSY_TX_RX0_RX1))) + { + return HAL_BUSY; + } + + /* Process locked */ + __HAL_LOCK(hcan); + + /* Change CAN state */ + if(FIFONumber == CAN_FIFO0) + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0; + break; + case(HAL_CAN_STATE_BUSY_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1; + break; + default: /* HAL_CAN_STATE_READY */ + hcan->State = HAL_CAN_STATE_BUSY_RX0; + break; + } + } + else /* FIFONumber == CAN_FIFO1 */ + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX1; + break; + case(HAL_CAN_STATE_BUSY_RX0): + hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0_RX1; + break; + default: /* HAL_CAN_STATE_READY */ + hcan->State = HAL_CAN_STATE_BUSY_RX1; + break; + } + } + /* Set CAN error code to none */ + hcan->ErrorCode = HAL_CAN_ERROR_NONE; + + /* Enable interrupts: */ + /* - Enable Error warning Interrupt */ + /* - Enable Error passive Interrupt */ + /* - Enable Bus-off Interrupt */ + /* - Enable Last error code Interrupt */ + /* - Enable Error Interrupt */ + /* - Enable Transmit mailbox empty Interrupt */ + __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG | + CAN_IT_EPV | + CAN_IT_BOF | + CAN_IT_LEC | + CAN_IT_ERR | + CAN_IT_TME); + + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + if(FIFONumber == CAN_FIFO0) + { + /* Enable FIFO 0 overrun and message pending Interrupt */ + __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0); + } + else + { + /* Enable FIFO 1 overrun and message pending Interrupt */ + __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1); + } + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Enters the Sleep (low power) mode. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan) +{ + uint32_t tickstart = 0U; + + /* Process locked */ + __HAL_LOCK(hcan); + + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_BUSY; + + /* Request Sleep mode */ + hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP); + + /* Sleep mode status */ + if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK) + { + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_ERROR; + } + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Wait the acknowledge */ + while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK) + { + if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE) + { + hcan->State = HAL_CAN_STATE_TIMEOUT; + /* Process unlocked */ + __HAL_UNLOCK(hcan); + return HAL_TIMEOUT; + } + } + + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral + * is in the normal mode. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL status. + */ +HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan) +{ + uint32_t tickstart = 0U; + + /* Process locked */ + __HAL_LOCK(hcan); + + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_BUSY; + + /* Wake up request */ + hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP; + + /* Get tick */ + tickstart = HAL_GetTick(); + + /* Sleep mode status */ + while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK) + { + if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE) + { + hcan->State= HAL_CAN_STATE_TIMEOUT; + /* Process unlocked */ + __HAL_UNLOCK(hcan); + return HAL_TIMEOUT; + } + } + if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK) + { + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_ERROR; + } + + /* Change CAN state */ + hcan->State = HAL_CAN_STATE_READY; + + /* Process unlocked */ + __HAL_UNLOCK(hcan); + + /* Return function status */ + return HAL_OK; +} + +/** + * @brief Handles CAN interrupt request + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval None + */ +void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan) +{ + uint32_t tmp1 = 0U, tmp2 = 0U, tmp3 = 0U; + uint32_t errorcode = HAL_CAN_ERROR_NONE; + + /* Check Overrun flag for FIFO0 */ + tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV0); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV0); + if(tmp1 && tmp2) + { + /* Set CAN error code to FOV0 error */ + errorcode |= HAL_CAN_ERROR_FOV0; + + /* Clear FIFO0 Overrun Flag */ + __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV0); + } + /* Check Overrun flag for FIFO1 */ + tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_FOV1); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FOV1); + + if(tmp1 && tmp2) + { + /* Set CAN error code to FOV1 error */ + errorcode |= HAL_CAN_ERROR_FOV1; + + /* Clear FIFO1 Overrun Flag */ + __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_FOV1); + } + + /* Check End of transmission flag */ + if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME)) + { + tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0); + tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1); + tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2); + if(tmp1 || tmp2 || tmp3) + { + tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK0); + tmp2 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK1); + tmp3 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_TXOK2); + /* Check Transmit success */ + if(tmp1 || tmp2 || tmp3) + { + /* Call transmit function */ + CAN_Transmit_IT(hcan); + } + else /* Transmit failure */ + { + /* Set CAN error code to TXFAIL error */ + errorcode |= HAL_CAN_ERROR_TXFAIL; + } + + /* Clear transmission status flags (RQCPx and TXOKx) */ + SET_BIT(hcan->Instance->TSR, CAN_TSR_RQCP0 | CAN_TSR_RQCP1 | CAN_TSR_RQCP2 | \ + CAN_FLAG_TXOK0 | CAN_FLAG_TXOK1 | CAN_FLAG_TXOK2); + } + } + + tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0); + /* Check End of reception flag for FIFO0 */ + if((tmp1 != 0U) && tmp2) + { + /* Call receive function */ + CAN_Receive_IT(hcan, CAN_FIFO0); + } + + tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1); + /* Check End of reception flag for FIFO1 */ + if((tmp1 != 0U) && tmp2) + { + /* Call receive function */ + CAN_Receive_IT(hcan, CAN_FIFO1); + } + + /* Set error code in handle */ + hcan->ErrorCode |= errorcode; + + tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG); + tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR); + /* Check Error Warning Flag */ + if(tmp1 && tmp2 && tmp3) + { + /* Set CAN error code to EWG error */ + hcan->ErrorCode |= HAL_CAN_ERROR_EWG; + } + + tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV); + tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR); + /* Check Error Passive Flag */ + if(tmp1 && tmp2 && tmp3) + { + /* Set CAN error code to EPV error */ + hcan->ErrorCode |= HAL_CAN_ERROR_EPV; + } + + tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF); + tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR); + /* Check Bus-Off Flag */ + if(tmp1 && tmp2 && tmp3) + { + /* Set CAN error code to BOF error */ + hcan->ErrorCode |= HAL_CAN_ERROR_BOF; + } + + tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC); + tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC); + tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR); + /* Check Last error code Flag */ + if((!tmp1) && tmp2 && tmp3) + { + tmp1 = (hcan->Instance->ESR) & CAN_ESR_LEC; + switch(tmp1) + { + case(CAN_ESR_LEC_0): + /* Set CAN error code to STF error */ + hcan->ErrorCode |= HAL_CAN_ERROR_STF; + break; + case(CAN_ESR_LEC_1): + /* Set CAN error code to FOR error */ + hcan->ErrorCode |= HAL_CAN_ERROR_FOR; + break; + case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0): + /* Set CAN error code to ACK error */ + hcan->ErrorCode |= HAL_CAN_ERROR_ACK; + break; + case(CAN_ESR_LEC_2): + /* Set CAN error code to BR error */ + hcan->ErrorCode |= HAL_CAN_ERROR_BR; + break; + case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0): + /* Set CAN error code to BD error */ + hcan->ErrorCode |= HAL_CAN_ERROR_BD; + break; + case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1): + /* Set CAN error code to CRC error */ + hcan->ErrorCode |= HAL_CAN_ERROR_CRC; + break; + default: + break; + } + + /* Clear Last error code Flag */ + hcan->Instance->ESR &= ~(CAN_ESR_LEC); + } + + /* Call the Error call Back in case of Errors */ + if(hcan->ErrorCode != HAL_CAN_ERROR_NONE) + { + /* Clear ERRI Flag */ + hcan->Instance->MSR = CAN_MSR_ERRI; + /* Set the CAN state ready to be able to start again the process */ + hcan->State = HAL_CAN_STATE_READY; + + /* Disable interrupts: */ + /* - Disable Error warning Interrupt */ + /* - Disable Error passive Interrupt */ + /* - Disable Bus-off Interrupt */ + /* - Disable Last error code Interrupt */ + /* - Disable Error Interrupt */ + /* - Disable FIFO 0 message pending Interrupt */ + /* - Disable FIFO 0 Overrun Interrupt */ + /* - Disable FIFO 1 message pending Interrupt */ + /* - Disable FIFO 1 Overrun Interrupt */ + /* - Disable Transmit mailbox empty Interrupt */ + __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG | + CAN_IT_EPV | + CAN_IT_BOF | + CAN_IT_LEC | + CAN_IT_ERR | + CAN_IT_FMP0| + CAN_IT_FOV0| + CAN_IT_FMP1| + CAN_IT_FOV1| + CAN_IT_TME); + + /* Call Error callback function */ + HAL_CAN_ErrorCallback(hcan); + } +} + +/** + * @brief Transmission complete callback in non blocking mode + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval None + */ +__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CAN_TxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Transmission complete callback in non blocking mode + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval None + */ +__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CAN_RxCpltCallback could be implemented in the user file + */ +} + +/** + * @brief Error CAN callback. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval None + */ +__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan) +{ + /* Prevent unused argument(s) compilation warning */ + UNUSED(hcan); + /* NOTE : This function Should not be modified, when the callback is needed, + the HAL_CAN_ErrorCallback could be implemented in the user file + */ +} + +/** + * @} + */ + +/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions + * @brief CAN Peripheral State functions + * +@verbatim + ============================================================================== + ##### Peripheral State and Error functions ##### + ============================================================================== + [..] + This subsection provides functions allowing to : + (+) Check the CAN state. + (+) Check CAN Errors detected during interrupt process + +@endverbatim + * @{ + */ + +/** + * @brief return the CAN state + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL state + */ +HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan) +{ + /* Return CAN state */ + return hcan->State; +} + +/** + * @brief Return the CAN error code + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval CAN Error Code + */ +uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan) +{ + return hcan->ErrorCode; +} + +/** + * @} + */ +/** + * @brief Initiates and transmits a CAN frame message. + * @param hcan pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @retval HAL status + */ +static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan) +{ + /* Disable Transmit mailbox empty Interrupt */ + __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME); + + if(hcan->State == HAL_CAN_STATE_BUSY_TX) + { + /* Disable Error warning, Error passive, Bus-off, Last error code + and Error Interrupts */ + __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG | + CAN_IT_EPV | + CAN_IT_BOF | + CAN_IT_LEC | + CAN_IT_ERR ); + } + + /* Change CAN state */ + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX_RX0): + hcan->State = HAL_CAN_STATE_BUSY_RX0; + break; + case(HAL_CAN_STATE_BUSY_TX_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX0_RX1; + break; + default: /* HAL_CAN_STATE_BUSY_TX */ + hcan->State = HAL_CAN_STATE_READY; + break; + } + + /* Transmission complete callback */ + HAL_CAN_TxCpltCallback(hcan); + + return HAL_OK; +} + +/** + * @brief Receives a correct CAN frame. + * @param hcan Pointer to a CAN_HandleTypeDef structure that contains + * the configuration information for the specified CAN. + * @param FIFONumber Specify the FIFO number + * @retval HAL status + * @retval None + */ +static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber) +{ + uint32_t tmp1 = 0U; + CanRxMsgTypeDef* pRxMsg = NULL; + + /* Set RxMsg pointer */ + if(FIFONumber == CAN_FIFO0) + { + pRxMsg = hcan->pRxMsg; + } + else /* FIFONumber == CAN_FIFO1 */ + { + pRxMsg = hcan->pRx1Msg; + } + + /* Get the Id */ + pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; + if (pRxMsg->IDE == CAN_ID_STD) + { + pRxMsg->StdId = 0x000007FFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21U); + } + else + { + pRxMsg->ExtId = 0x1FFFFFFFU & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3U); + } + + pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR; + /* Get the DLC */ + pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR; + /* Get the FIFONumber */ + pRxMsg->FIFONumber = FIFONumber; + /* Get the FMI */ + pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8U); + /* Get the data field */ + pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR; + pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8U); + pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16U); + pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24U); + pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR; + pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8U); + pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16U); + pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24U); + /* Release the FIFO */ + /* Release FIFO0 */ + if (FIFONumber == CAN_FIFO0) + { + __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0); + + /* Disable FIFO 0 overrun and message pending Interrupt */ + __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV0 | CAN_IT_FMP0); + } + /* Release FIFO1 */ + else /* FIFONumber == CAN_FIFO1 */ + { + __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1); + + /* Disable FIFO 1 overrun and message pending Interrupt */ + __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FOV1 | CAN_IT_FMP1); + } + + tmp1 = hcan->State; + if((tmp1 == HAL_CAN_STATE_BUSY_RX0) || (tmp1 == HAL_CAN_STATE_BUSY_RX1)) + { + /* Disable Error warning, Error passive, Bus-off, Last error code + and Error Interrupts */ + __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG | + CAN_IT_EPV | + CAN_IT_BOF | + CAN_IT_LEC | + CAN_IT_ERR); + } + + /* Change CAN state */ + if (FIFONumber == CAN_FIFO0) + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX_RX0): + hcan->State = HAL_CAN_STATE_BUSY_TX; + break; + case(HAL_CAN_STATE_BUSY_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX1; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX1; + break; + default: /* HAL_CAN_STATE_BUSY_RX0 */ + hcan->State = HAL_CAN_STATE_READY; + break; + } + } + else /* FIFONumber == CAN_FIFO1 */ + { + switch(hcan->State) + { + case(HAL_CAN_STATE_BUSY_TX_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX; + break; + case(HAL_CAN_STATE_BUSY_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_RX0; + break; + case(HAL_CAN_STATE_BUSY_TX_RX0_RX1): + hcan->State = HAL_CAN_STATE_BUSY_TX_RX0; + break; + default: /* HAL_CAN_STATE_BUSY_RX1 */ + hcan->State = HAL_CAN_STATE_READY; + break; + } + } + + /* Receive complete callback */ + HAL_CAN_RxCpltCallback(hcan); + + /* Return function status */ + return HAL_OK; +} + +/** + * @} + */ + +#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */ +/** + * @} + */ + +/** + * @} + */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f767-fire-challenger/.config b/bsp/stm32/stm32f767-fire-challenger/.config index c5d1fc091..5cb84f7e8 100644 --- a/bsp/stm32/stm32f767-fire-challenger/.config +++ b/bsp/stm32/stm32f767-fire-challenger/.config @@ -111,6 +111,7 @@ CONFIG_FINSH_ARG_MAX=10 CONFIG_RT_USING_DEVICE_IPC=y CONFIG_RT_PIPE_BUFSZ=512 CONFIG_RT_USING_SERIAL=y +CONFIG_RT_SERIAL_USING_DMA=y # CONFIG_RT_USING_CAN is not set # CONFIG_RT_USING_HWTIMER is not set # CONFIG_RT_USING_CPUTIME is not set @@ -186,6 +187,7 @@ CONFIG_RT_USING_PIN=y # # CONFIG_RT_USING_CMSIS_OS is not set # CONFIG_RT_USING_RTT_CMSIS is not set +# CONFIG_RT_USING_LWP is not set # # RT-Thread online packages @@ -326,10 +328,6 @@ CONFIG_SOC_STM32F767IG=y CONFIG_BSP_USING_USB_TO_USART=y # CONFIG_BSP_USING_RS232 is not set # CONFIG_BSP_USING_SDRAM is not set -# CONFIG_BSP_USING_SPI_FLASH is not set -# CONFIG_BSP_USING_MPU6050 is not set -# CONFIG_BSP_USING_ETH is not set -# CONFIG_BSP_USING_POT is not set # # On-chip Peripheral Drivers diff --git a/bsp/stm32/stm32f767-fire-challenger/README.md b/bsp/stm32/stm32f767-fire-challenger/README.md index eed759bc9..eaf4afa7b 100644 --- a/bsp/stm32/stm32f767-fire-challenger/README.md +++ b/bsp/stm32/stm32f767-fire-challenger/README.md @@ -22,7 +22,7 @@ 该开发板常用 **板载资源** 如下： -- MCU：STM32f767，主频 216MHz，1MB FLASH ，256KB RAM +- MCU：STM32f767，主频 216MHz，1MB FLASH ，512KB RAM ，16K CACHE - 外部 RAM：型号，8MB - 外部 FLASH：型号，16MB - 常用外设 @@ -42,7 +42,7 @@ | USB 转串口 | 支持 | | | RS232 | 支持 | 与以太网有引脚冲突 | | QSPI Flash | 暂不支持 | | -| 电位器 | 暂不支持 | 使用 ADC1 | +| 电位器 | 暂不支持 | 使用 ADC1 | | 以太网 | 暂不支持 | | | MPU6050六轴传感器 | 暂不支持 | | | SDRAM | 支持 | | @@ -56,7 +56,7 @@ | ADC | 支持 | | | RTC | 支持 | | | WDT | 支持 | | -| FLASH | 暂不支持 | | +| FLASH | 支持 | 已适配 [FAL](https://github.com/RT-Thread-packages/fal) | | SDIO | 暂不支持 | 即将支持 | | PWM | 暂不支持 | 即将支持 | | USB Device | 暂不支持 | 即将支持 | diff --git a/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/.mxproject b/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/.mxproject index 2253bdb2d..086ecbff2 100644 --- a/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/.mxproject +++ b/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/.mxproject @@ -1,13 +1,13 @@ [PreviousGenFiles] -HeaderPath=D:/Files/github/rt-thread/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/Inc +HeaderPath=D:/Files/github/rt-thread-master/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/Inc HeaderFiles=stm32f7xx_it.h;stm32f7xx_hal_conf.h;main.h; -SourcePath=D:/Files/github/rt-thread/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/Src +SourcePath=D:/Files/github/rt-thread-master/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config/Src SourceFiles=stm32f7xx_it.c;stm32f7xx_hal_msp.c;main.c; [PreviousLibFiles] LibFiles=Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_cortex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_tim_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_uart_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_rcc_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_flash_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_gpio_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_dma_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_pwr_ex.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_def.h;Drivers/STM32F7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c.h;Drivers/STM32F7xx_HAL_Driver/Inc/stm32f7xx_hal_i2c_ex.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f767xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Include/system_stm32f7xx.h;Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;Drivers/CMSIS/Include/arm_common_tables.h;Drivers/CMSIS/Include/arm_const_structs.h;Drivers/CMSIS/Include/arm_math.h;Drivers/CMSIS/Include/cmsis_armcc.h;Drivers/CMSIS/Include/cmsis_armcc_V6.h;Drivers/CMSIS/Include/cmsis_gcc.h;Drivers/CMSIS/Include/core_cm0.h;Drivers/CMSIS/Include/core_cm0plus.h;Drivers/CMSIS/Include/core_cm3.h;Drivers/CMSIS/Include/core_cm4.h;Drivers/CMSIS/Include/core_cm7.h;Drivers/CMSIS/Include/core_cmFunc.h;Drivers/CMSIS/Include/core_cmInstr.h;Drivers/CMSIS/Include/core_cmSimd.h;Drivers/CMSIS/Include/core_sc000.h;Drivers/CMSIS/Include/core_sc300.h; [PreviousUsedKeilFiles] -SourceFiles=..\Src\main.c;..\Src\stm32f7xx_it.c;..\Src\stm32f7xx_hal_msp.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;D:/Files/github/rt-thread/bsp/stm32/stm32f767-fire-challenger/board/CubeMX_Config//MDK-ARM/startup_stm32f767xx.s; +SourceFiles=..\Src\main.c;..\Src\stm32f7xx_it.c;..\Src\stm32f7xx_hal_msp.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_cortex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_tim_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_uart.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_rcc_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_flash_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_gpio.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_dma_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_pwr_ex.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c.c;../Drivers/STM32F7xx_HAL_Driver/Src/stm32f7xx_hal_i2c_ex.c;../\Src/system_stm32f7xx.c;../Drivers/CMSIS/Device/ST/STM32F7xx/Source/Templates/system_stm32f7xx.c;null; HeaderPath=..\Drivers\STM32F7xx_HAL_Driver\Inc;..\Drivers\STM32F7xx_HAL_Driver\Inc\Legacy;..\Drivers\CMSIS\Device\ST\STM32F7xx\Include;..\Drivers\CMSIS\Include;..\Inc; diff --git a/bsp/stm32/stm32f767-fire-challenger/board/Kconfig b/bsp/stm32/stm32f767-fire-challenger/board/Kconfig index e0c9ac386..defcdcacd 100644 --- a/bsp/stm32/stm32f767-fire-challenger/board/Kconfig +++ b/bsp/stm32/stm32f767-fire-challenger/board/Kconfig @@ -16,7 +16,11 @@ menu "Onboard Peripheral Drivers" bool "Enable RS232 (uart2 pin conflict with Ethernet)" select BSP_USING_UART2 default n - + + config BSP_USING_SDRAM + bool "Enable SDRAM" + default n + endmenu menu "On-chip Peripheral Drivers" diff --git a/bsp/stm32/stm32f767-fire-challenger/board/board.c b/bsp/stm32/stm32f767-fire-challenger/board/board.c index 623e1e0f0..6bf5be309 100644 --- a/bsp/stm32/stm32f767-fire-challenger/board/board.c +++ b/bsp/stm32/stm32f767-fire-challenger/board/board.c @@ -14,6 +14,7 @@ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; /**Configure the main internal regulator output voltage */ @@ -25,10 +26,10 @@ void SystemClock_Config(void) RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; - RCC_OscInitStruct.PLL.PLLM = 15; - RCC_OscInitStruct.PLL.PLLN = 216; + RCC_OscInitStruct.PLL.PLLM = 25; + RCC_OscInitStruct.PLL.PLLN = 432; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; - RCC_OscInitStruct.PLL.PLLQ = 4; + RCC_OscInitStruct.PLL.PLLQ = 2; if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) { Error_Handler(); @@ -48,7 +49,13 @@ void SystemClock_Config(void) RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; - if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) + if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_7) != HAL_OK) + { + Error_Handler(); + } + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1; + PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { Error_Handler(); } @@ -58,12 +65,13 @@ void MX_GPIO_Init(void) { /* GPIO Ports Clock Enable */ - __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOF_CLK_ENABLE(); __HAL_RCC_GPIOH_CLK_ENABLE(); - __HAL_RCC_GPIOA_CLK_ENABLE(); - __HAL_RCC_GPIOB_CLK_ENABLE(); + __HAL_RCC_GPIOC_CLK_ENABLE(); __HAL_RCC_GPIOG_CLK_ENABLE(); + __HAL_RCC_GPIOE_CLK_ENABLE(); + __HAL_RCC_GPIOD_CLK_ENABLE(); + __HAL_RCC_GPIOA_CLK_ENABLE(); } @@ -71,7 +79,7 @@ void MX_GPIO_Init(void) int board_pin_init(void) { rt_pin_mode(LED0_PIN, PIN_MODE_OUTPUT); - rt_pin_mode(LED1_PIN, PIN_MODE_OUTPUT); + // rt_pin_mode(LED1_PIN, PIN_MODE_OUTPUT); return 0; } diff --git a/bsp/stm32/stm32f767-fire-challenger/board/board.h b/bsp/stm32/stm32f767-fire-challenger/board/board.h index e00193850..2cf1db8a5 100644 --- a/bsp/stm32/stm32f767-fire-challenger/board/board.h +++ b/bsp/stm32/stm32f767-fire-challenger/board/board.h @@ -19,11 +19,11 @@ #include "drv_gpio.h" #endif -#define STM32_SRAM_SIZE (256) +#define STM32_SRAM_SIZE (512) #define STM32_SRAM_END (0x20000000 + STM32_SRAM_SIZE * 1024) #define STM32_FLASH_START_ADRESS ((uint32_t)0x08000000) -#define STM32_FLASH_SIZE (8 * 1024 * 1024) +#define STM32_FLASH_SIZE (1024 * 1024) #define STM32_FLASH_END_ADDRESS ((uint32_t)(STM32_FLASH_START_ADRESS + STM32_FLASH_SIZE)) #if defined(__CC_ARM) || defined(__CLANG_ARM) @@ -42,6 +42,7 @@ extern int __bss_end; /* Board Pin definitions */ #define LED0_PIN GET_PIN(H, 10) #define LED1_PIN GET_PIN(H, 11) +#define LED2_PIN GET_PIN(H, 12) void SystemClock_Config(void); void MX_GPIO_Init(void); diff --git a/bsp/stm32/stm32f767-fire-challenger/board/ports/fal_cfg.h b/bsp/stm32/stm32f767-fire-challenger/board/ports/fal_cfg.h new file mode 100644 index 000000000..3f014dbc9 --- /dev/null +++ b/bsp/stm32/stm32f767-fire-challenger/board/ports/fal_cfg.h @@ -0,0 +1,34 @@ +/* + * Copyright (c) 2006-2018, RT-Thread Development Team + * + * SPDX-License-Identifier: Apache-2.0 + * + * Change Logs: + * Date Author Notes + * 2018-12-5 SummerGift first version + */ + +#ifndef _FAL_CFG_H_ +#define _FAL_CFG_H_ + +#include +#include + +extern const struct fal_flash_dev stm32_onchip_flash; + +/* flash device table */ +#define FAL_FLASH_DEV_TABLE \ +{ \ + &stm32_onchip_flash, \ +} +/* ====================== Partition Configuration ========================== */ +#ifdef FAL_PART_HAS_TABLE_CFG + +/* partition table */ +#define FAL_PART_TABLE \ +{ \ + {FAL_PART_MAGIC_WROD, "app", "onchip_flash", 0, 1008 * 1024, 0},\ + {FAL_PART_MAGIC_WROD, "param", "onchip_flash", 1008* 1024 , 16 * 1024, 0},\ +} +#endif /* FAL_PART_HAS_TABLE_CFG */ +#endif /* _FAL_CFG_H_ */ diff --git a/bsp/stm32/stm32f767-fire-challenger/project.uvprojx b/bsp/stm32/stm32f767-fire-challenger/project.uvprojx index fe648f2ae..746cbc6e4 100644 --- a/bsp/stm32/stm32f767-fire-challenger/project.uvprojx +++ b/bsp/stm32/stm32f767-fire-challenger/project.uvprojx @@ -338,7 +338,7 @@ STM32F767xx, USE_HAL_DRIVER - applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\libraries\HAL_Drivers\drv_flash;..\..\..\include;..\..\..\libcpu\arm\cortex-m7;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Inc;..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Include;..\libraries\STM32F7xx_HAL\CMSIS\Include + applications;.;board;board\CubeMX_Config\Inc;board\ports;..\libraries\HAL_Drivers;..\libraries\HAL_Drivers\config;..\..\..\include;..\..\..\libcpu\arm\cortex-m7;..\..\..\libcpu\arm\common;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\drivers\include;..\..\..\components\finsh;..\libraries\STM32F7xx_HAL\STM32F7xx_HAL_Driver\Inc;..\libraries\STM32F7xx_HAL\CMSIS\Device\ST\STM32F7xx\Include;..\libraries\STM32F7xx_HAL\CMSIS\Include diff --git a/bsp/stm32/stm32f767-fire-challenger/rtconfig.h b/bsp/stm32/stm32f767-fire-challenger/rtconfig.h index b452bdc55..69261c5e1 100644 --- a/bsp/stm32/stm32f767-fire-challenger/rtconfig.h +++ b/bsp/stm32/stm32f767-fire-challenger/rtconfig.h @@ -78,6 +78,7 @@ #define RT_USING_DEVICE_IPC #define RT_PIPE_BUFSZ 512 #define RT_USING_SERIAL +#define RT_SERIAL_USING_DMA #define RT_USING_PIN /* Using WiFi */ -- GitLab