diff --git a/bsp/stm3210/board.c b/bsp/stm3210/board.c index 20373aa40638524a4cd89d7962073fe73f69ae74..68de1e2c73eb3effffdeaf9c417e3e319bf0fc05 100644 --- a/bsp/stm3210/board.c +++ b/bsp/stm3210/board.c @@ -94,8 +94,8 @@ void rt_hw_board_init() } #if STM32_CONSOLE_USART == 1 -#define CONSOLE_RX_PIN GPIO_Pin_9 -#define CONSOLE_TX_PIN GPIO_Pin_10 +#define CONSOLE_TX_PIN GPIO_Pin_9 +#define CONSOLE_RX_PIN GPIO_Pin_10 #define CONSOLE_GPIO GPIOA #define CONSOLE_USART USART1 #define CONSOLE_RCC RCC_APB2Periph_USART1 @@ -103,14 +103,14 @@ void rt_hw_board_init() #elif STM32_CONSOLE_USART == 2 #if defined(STM32F10X_LD) || defined(STM32F10X_MD) || defined(STM32F10X_CL) -#define CONSOLE_RX_PIN GPIO_Pin_6 #define CONSOLE_TX_PIN GPIO_Pin_5 +#define CONSOLE_RX_PIN GPIO_Pin_6 #define CONSOLE_GPIO GPIOD #define CONSOLE_RCC RCC_APB1Periph_USART2 #define CONSOLE_RCC_GPIO RCC_APB2Periph_GPIOD #elif defined(STM32F10X_HD) -#define CONSOLE_RX_PIN GPIO_Pin_3 #define CONSOLE_TX_PIN GPIO_Pin_2 +#define CONSOLE_RX_PIN GPIO_Pin_3 #define CONSOLE_GPIO GPIOA #define CONSOLE_RCC RCC_APB1Periph_USART2 #define CONSOLE_RCC_GPIO RCC_APB2Periph_GPIOA @@ -154,13 +154,13 @@ static void rt_hw_console_init() GPIO_InitTypeDef GPIO_InitStructure; /* Configure USART Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = CONSOLE_RX_PIN; + GPIO_InitStructure.GPIO_Pin = CONSOLE_TX_PIN; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(CONSOLE_GPIO, &GPIO_InitStructure); /* Configure USART Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = CONSOLE_TX_PIN; + GPIO_InitStructure.GPIO_Pin = CONSOLE_RX_PIN; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; GPIO_Init(CONSOLE_GPIO, &GPIO_InitStructure); } diff --git a/bsp/stm3210/project_107/board.h b/bsp/stm3210/project_107/board.h index 22968525fdf8d3cfb0c794908d2b57c9db397204..63fc9c0d52e9d9367c1e0dac8b9a6f6168f1218a 100644 --- a/bsp/stm3210/project_107/board.h +++ b/bsp/stm3210/project_107/board.h @@ -40,7 +40,7 @@ // Console on USART: <0=> no console <1=>USART 1 <2=>USART 2 <3=> USART 3 // Default: 1 -#define STM32_CONSOLE_USART 1 +#define STM32_CONSOLE_USART 2 void rt_hw_board_led_on(int n); void rt_hw_board_led_off(int n); diff --git a/bsp/stm3210/project_107/rtconfig.h b/bsp/stm3210/project_107/rtconfig.h index 85a4c3628b1c1dfa322065cfa4f3b62d9ea18349..20685cce728a723109ffe0d9e9e57b5e1ef9ae14 100644 --- a/bsp/stm3210/project_107/rtconfig.h +++ b/bsp/stm3210/project_107/rtconfig.h @@ -53,7 +53,7 @@ /* SECTION: Device System */ /* Using Device System */ #define RT_USING_DEVICE -#define RT_USING_UART1 +#define RT_USING_UART2 /* SECTION: Console options */ /* the buffer size of console*/ @@ -64,7 +64,7 @@ /* Using symbol table */ #define FINSH_USING_SYMTAB #define FINSH_USING_DESCRIPTION -#define FINSH_DEVICE_NAME "uart1" +#define FINSH_DEVICE_NAME "uart2" /* SECTION: device filesystem */ #define RT_USING_DFS diff --git a/bsp/stm3210/project_107/stm32f10x_it.c b/bsp/stm3210/project_107/stm32f10x_it.c index 3b787c3a52bb8d8322b516a6ac6b7057d49c7f4a..26447a8f272cd8d79dfde8abb470ef2cab83eb74 100644 --- a/bsp/stm3210/project_107/stm32f10x_it.c +++ b/bsp/stm3210/project_107/stm32f10x_it.c @@ -156,31 +156,6 @@ void DMA1_Channel2_IRQHandler(void) #endif } -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -#ifdef RT_USING_UART2 - extern struct rt_device uart2_device; - extern void rt_hw_serial_dma_rx_isr(struct rt_device *device); - - /* enter interrupt */ - rt_interrupt_enter(); - - /* clear DMA flag */ - DMA_ClearFlag(DMA1_FLAG_TC6 | DMA1_FLAG_TE6); - rt_hw_serial_dma_rx_isr(&uart2_device); - - /* leave interrupt */ - rt_interrupt_leave(); -#endif -} - /******************************************************************************* * Function Name : USART1_IRQHandler * Description : This function handles USART1 global interrupt request. diff --git a/bsp/stm3210/project_107/usart.c b/bsp/stm3210/project_107/usart.c new file mode 100644 index 0000000000000000000000000000000000000000..efa426deb8d802cd44648524f3d2887b2247ad04 --- /dev/null +++ b/bsp/stm3210/project_107/usart.c @@ -0,0 +1,317 @@ +#include "usart.h" +#include +#include + +/* + * Use UART1 as console output and finsh input + * interrupt Rx and poll Tx (stream mode) + * + * Use UART2 with DMA Rx and poll Tx -- DMA channel 6 + * Use UART3 with DMA Tx and interrupt Rx -- DMA channel 2 + * + * USART DMA setting on STM32 + * USART1 Tx --> DMA Channel 4 + * USART1 Rx --> DMA Channel 5 + * USART2 Tx --> DMA Channel 7 + * USART2 Rx --> DMA Channel 6 + * USART3 Tx --> DMA Channel 2 + * USART3 Rx --> DMA Channel 3 + */ + +#ifdef RT_USING_UART1 +struct stm32_serial_int_rx uart1_int_rx; +struct stm32_serial_device uart1 = +{ + USART1, + &uart1_int_rx, + RT_NULL, + RT_NULL, + RT_NULL +}; +struct rt_device uart1_device; +#endif + +#ifdef RT_USING_UART2 +struct stm32_serial_int_rx uart2_int_rx; +struct stm32_serial_dma_rx uart2_dma_rx; +struct stm32_serial_device uart2 = +{ + USART2, + &uart2_int_rx, + RT_NULL, + RT_NULL, + RT_NULL +}; +struct rt_device uart2_device; +#endif + +#ifdef RT_USING_UART3 +struct stm32_serial_int_rx uart3_int_rx; +struct stm32_serial_dma_tx uart3_dma_tx; +struct stm32_serial_device uart3 = +{ + USART3, + &uart3_int_rx, + RT_NULL, + RT_NULL, + &uart3_dma_tx +}; +struct rt_device uart3_device; +#endif + +#define USART1_DR_Base 0x40013804 +#define USART2_DR_Base 0x40004404 +#define USART3_DR_Base 0x40004804 + +/* USART1_REMAP = 0 */ +#define UART1_GPIO_TX GPIO_Pin_9 +#define UART1_GPIO_RX GPIO_Pin_10 +#define UART1_GPIO GPIOA +#define RCC_APBPeriph_UART1 RCC_APB2Periph_USART1 +#define UART1_TX_DMA DMA1_Channel4 +#define UART1_RX_DMA DMA1_Channel5 + +/* USART2_REMAP = 0 */ +#define UART2_GPIO_TX GPIO_Pin_2 +#define UART2_GPIO_RX GPIO_Pin_3 +#define UART2_GPIO GPIOA +#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2 +#define UART2_TX_DMA DMA1_Channel7 +#define UART2_RX_DMA DMA1_Channel6 + +/* USART3_REMAP[1:0] = 00 */ +#define UART3_GPIO_RX GPIO_Pin_11 +#define UART3_GPIO_TX GPIO_Pin_10 +#define UART3_GPIO GPIOB +#define RCC_APBPeriph_UART3 RCC_APB1Periph_USART3 +#define UART3_TX_DMA DMA1_Channel2 +#define UART3_RX_DMA DMA1_Channel3 + +static void RCC_Configuration(void) +{ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); + +#ifdef RT_USING_UART1 + /* Enable USART1 and GPIOA clocks */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); +#endif + +#ifdef RT_USING_UART2 + /* Enable GPIOD clocks */ + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE); + /* Enable USART2 clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); +#endif + +#ifdef RT_USING_UART3 + RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); + /* Enable USART3 clock */ + RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE); +#endif + +#if defined (RT_USING_UART2) || defined (RT_USING_UART3) + /* DMA clock enable */ + RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); +#endif +} + +static void GPIO_Configuration(void) +{ + GPIO_InitTypeDef GPIO_InitStructure; + +#ifdef RT_USING_UART1 + /* Configure USART1 Rx (PA.10) as input floating */ + GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(UART1_GPIO, &GPIO_InitStructure); + + /* Configure USART1 Tx (PA.09) as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_Init(UART1_GPIO, &GPIO_InitStructure); +#endif + +#ifdef RT_USING_UART2 + /* Configure USART2 Rx as input floating */ + GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(UART2_GPIO, &GPIO_InitStructure); + + /* Configure USART2 Tx as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(UART2_GPIO, &GPIO_InitStructure); +#endif + +#ifdef RT_USING_UART3 + /* Configure USART3 Rx as input floating */ + GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; + GPIO_Init(UART3_GPIO, &GPIO_InitStructure); + + /* Configure USART3 Tx as alternate function push-pull */ + GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX; + GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; + GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; + GPIO_Init(UART3_GPIO, &GPIO_InitStructure); +#endif +} + +static void NVIC_Configuration(void) +{ + NVIC_InitTypeDef NVIC_InitStructure; + + /* Configure the NVIC Preemption Priority Bits */ + NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0); + +#ifdef RT_USING_UART1 + /* Enable the USART1 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQn; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#endif + +#ifdef RT_USING_UART2 + /* Enable the USART2 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#endif + +#ifdef RT_USING_UART3 + /* Enable the USART3 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQn; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); + + /* Enable the DMA1 Channel2 Interrupt */ + NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel2_IRQn; + NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; + NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; + NVIC_Init(&NVIC_InitStructure); +#endif +} + +static void DMA_Configuration(void) +{ +#if defined (RT_USING_UART3) + DMA_InitTypeDef DMA_InitStructure; + + /* fill init structure */ + DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; + DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; + DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; + DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; + DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; + DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh; + DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; + + /* DMA1 Channel5 (triggered by USART3 Tx event) Config */ + DMA_DeInit(UART3_TX_DMA); + DMA_InitStructure.DMA_PeripheralBaseAddr = USART3_DR_Base; + DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; + DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0; + DMA_InitStructure.DMA_BufferSize = 0; + DMA_Init(UART3_TX_DMA, &DMA_InitStructure); + DMA_ITConfig(UART3_TX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE); + DMA_ClearFlag(DMA1_FLAG_TC5); +#endif +} + +/* + * Init all related hardware in here + * rt_hw_serial_init() will register all supported USART device + */ +void rt_hw_usart_init() +{ + USART_InitTypeDef USART_InitStructure; + USART_ClockInitTypeDef USART_ClockInitStructure; + + RCC_Configuration(); + + GPIO_Configuration(); + + NVIC_Configuration(); + + DMA_Configuration(); + + /* uart init */ +#ifdef RT_USING_UART1 + USART_InitStructure.USART_BaudRate = 115200; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; + USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; + USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; + USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; + USART_Init(USART1, &USART_InitStructure); + USART_ClockInit(USART1, &USART_ClockInitStructure); + + /* register uart1 */ + rt_hw_serial_register(&uart1_device, "uart1", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, + &uart1); + + /* enable interrupt */ + USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); +#endif + +#ifdef RT_USING_UART2 + USART_InitStructure.USART_BaudRate = 115200; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; + USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; + USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; + USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; + USART_Init(USART2, &USART_InitStructure); + USART_ClockInit(USART2, &USART_ClockInitStructure); + + /* register uart2 */ + rt_hw_serial_register(&uart2_device, "uart2", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, + &uart2); + + /* Enable USART2 DMA Rx request */ + USART_ITConfig(USART2, USART_IT_RXNE, ENABLE); +#endif + +#ifdef RT_USING_UART3 + USART_InitStructure.USART_BaudRate = 115200; + USART_InitStructure.USART_WordLength = USART_WordLength_8b; + USART_InitStructure.USART_StopBits = USART_StopBits_1; + USART_InitStructure.USART_Parity = USART_Parity_No; + USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; + USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; + USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; + USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; + USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; + USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; + USART_Init(USART3, &USART_InitStructure); + USART_ClockInit(USART3, &USART_ClockInitStructure); + + uart3_dma_tx.dma_channel= UART3_TX_DMA; + + /* register uart3 */ + rt_hw_serial_register(&uart3_device, "uart3", + RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_TX, + &uart3); + + /* Enable USART3 DMA Tx request */ + USART_DMACmd(USART3, USART_DMAReq_Tx , ENABLE); + + /* enable interrupt */ + USART_ITConfig(USART3, USART_IT_RXNE, ENABLE); +#endif +}