From 1b48b064ddb3939d0242cdbeaebed175a79ecfd4 Mon Sep 17 00:00:00 2001 From: "bernard.xiong" Date: Wed, 16 Dec 2009 08:29:18 +0000 Subject: [PATCH] remove stm32 and stm32_lib3.1.0 bsp. git-svn-id: https://rt-thread.googlecode.com/svn/trunk@202 bbd45198-f89e-11dd-88c7-29a3b14d5316 --- bsp/stm32/application.c | 82 - bsp/stm32/board.c | 405 - bsp/stm32/board.h | 25 - bsp/stm32/cortexm3_macro.s | 279 - bsp/stm32/enc28j60.c | 727 -- bsp/stm32/enc28j60.h | 256 - bsp/stm32/kbd.c | 91 - bsp/stm32/kbd.h | 7 - bsp/stm32/lcd.c | 487 - bsp/stm32/lcd.h | 148 - bsp/stm32/library/inc/cortexm3_macro.h | 53 - bsp/stm32/library/inc/stm32f10x_adc.h | 300 - bsp/stm32/library/inc/stm32f10x_bkp.h | 122 - bsp/stm32/library/inc/stm32f10x_can.h | 263 - bsp/stm32/library/inc/stm32f10x_crc.h | 37 - bsp/stm32/library/inc/stm32f10x_dac.h | 167 - bsp/stm32/library/inc/stm32f10x_dbgmcu.h | 55 - bsp/stm32/library/inc/stm32f10x_dma.h | 297 - bsp/stm32/library/inc/stm32f10x_exti.h | 107 - bsp/stm32/library/inc/stm32f10x_flash.h | 208 - bsp/stm32/library/inc/stm32f10x_fsmc.h | 337 - bsp/stm32/library/inc/stm32f10x_gpio.h | 237 - bsp/stm32/library/inc/stm32f10x_i2c.h | 285 - bsp/stm32/library/inc/stm32f10x_iwdg.h | 69 - bsp/stm32/library/inc/stm32f10x_lib.h | 124 - bsp/stm32/library/inc/stm32f10x_map.h | 7603 ---------------- bsp/stm32/library/inc/stm32f10x_nvic.h | 287 - bsp/stm32/library/inc/stm32f10x_pwr.h | 77 - bsp/stm32/library/inc/stm32f10x_rcc.h | 288 - bsp/stm32/library/inc/stm32f10x_rtc.h | 70 - bsp/stm32/library/inc/stm32f10x_sdio.h | 337 - bsp/stm32/library/inc/stm32f10x_spi.h | 289 - bsp/stm32/library/inc/stm32f10x_systick.h | 64 - bsp/stm32/library/inc/stm32f10x_tim.h | 778 -- bsp/stm32/library/inc/stm32f10x_type.h | 80 - bsp/stm32/library/inc/stm32f10x_usart.h | 253 - bsp/stm32/library/inc/stm32f10x_wwdg.h | 54 - bsp/stm32/library/src/stm32f10x_adc.c | 1402 --- bsp/stm32/library/src/stm32f10x_bkp.c | 272 - bsp/stm32/library/src/stm32f10x_can.c | 907 -- bsp/stm32/library/src/stm32f10x_crc.c | 114 - bsp/stm32/library/src/stm32f10x_dac.c | 389 - bsp/stm32/library/src/stm32f10x_dbgmcu.c | 97 - bsp/stm32/library/src/stm32f10x_dma.c | 678 -- bsp/stm32/library/src/stm32f10x_exti.c | 219 - bsp/stm32/library/src/stm32f10x_flash.c | 919 -- bsp/stm32/library/src/stm32f10x_fsmc.c | 851 -- bsp/stm32/library/src/stm32f10x_gpio.c | 583 -- bsp/stm32/library/src/stm32f10x_i2c.c | 1216 --- bsp/stm32/library/src/stm32f10x_iwdg.c | 148 - bsp/stm32/library/src/stm32f10x_lib.c | 303 - bsp/stm32/library/src/stm32f10x_nvic.c | 751 -- bsp/stm32/library/src/stm32f10x_pwr.c | 280 - bsp/stm32/library/src/stm32f10x_rcc.c | 1105 --- bsp/stm32/library/src/stm32f10x_rtc.c | 320 - bsp/stm32/library/src/stm32f10x_sdio.c | 832 -- bsp/stm32/library/src/stm32f10x_spi.c | 863 -- bsp/stm32/library/src/stm32f10x_systick.c | 181 - bsp/stm32/library/src/stm32f10x_tim.c | 3219 ------- bsp/stm32/library/src/stm32f10x_usart.c | 1001 --- bsp/stm32/library/src/stm32f10x_wwdg.c | 185 - bsp/stm32/project.Opt | 169 - bsp/stm32/project.Uv2 | 227 - bsp/stm32/project.ewd | 1299 --- bsp/stm32/project.ewp | 1805 ---- bsp/stm32/project.eww | 10 - bsp/stm32/rtc.c | 217 - bsp/stm32/rtc.h | 6 - bsp/stm32/rtconfig.h | 157 - bsp/stm32/sdcard.c | 3108 ------- bsp/stm32/sdcard.h | 264 - bsp/stm32/startup.c | 150 - bsp/stm32/stm32f10x.h | 6 - bsp/stm32/stm32f10x_conf.h | 174 - bsp/stm32/stm32f10x_flash.icf | 32 - bsp/stm32/stm32f10x_it.c | 953 -- bsp/stm32/stm32f10x_it.h | 110 - bsp/stm32/usart.c | 341 - bsp/stm32/usart.h | 9 - .../Libraries/CMSIS/Core/CM3/core_cm3.c | 829 -- .../Libraries/CMSIS/Core/CM3/core_cm3.h | 1367 --- .../CM3/startup/arm/startup_stm32f10x_cl.s | 364 - .../CM3/startup/arm/startup_stm32f10x_hd.s | 370 - .../CM3/startup/arm/startup_stm32f10x_ld.s | 293 - .../CM3/startup/arm/startup_stm32f10x_md.s | 238 - .../CM3/startup/gcc/startup_stm32f10x_cl.s | 465 - .../CM3/startup/gcc/startup_stm32f10x_hd.s | 483 - .../CM3/startup/gcc/startup_stm32f10x_ld.s | 340 - .../CM3/startup/gcc/startup_stm32f10x_md.s | 356 - .../CM3/startup/iar/startup_stm32f10x_cl.s | 498 -- .../CM3/startup/iar/startup_stm32f10x_hd.s | 510 -- .../CM3/startup/iar/startup_stm32f10x_ld.s | 357 - .../CM3/startup/iar/startup_stm32f10x_md.s | 382 - .../Libraries/CMSIS/Core/CM3/stm32f10x.h | 7851 ----------------- .../CMSIS/Core/CM3/system_stm32f10x.c | 930 -- .../CMSIS/Core/CM3/system_stm32f10x.h | 100 - .../CMSIS/Core/Documentation/CMSIS_Core.htm | 1231 --- .../Libraries/CMSIS/License.doc | Bin 39936 -> 0 bytes .../STM32F10x_StdPeriph_Driver/inc/misc.h | 219 - .../inc/stm32f10x_adc.h | 479 - .../inc/stm32f10x_bkp.h | 194 - .../inc/stm32f10x_can.h | 535 -- .../inc/stm32f10x_crc.h | 93 - .../inc/stm32f10x_dac.h | 282 - .../inc/stm32f10x_dbgmcu.h | 109 - .../inc/stm32f10x_dma.h | 437 - .../inc/stm32f10x_exti.h | 183 - .../inc/stm32f10x_flash.h | 346 - .../inc/stm32f10x_fsmc.h | 716 -- .../inc/stm32f10x_gpio.h | 359 - .../inc/stm32f10x_i2c.h | 472 - .../inc/stm32f10x_iwdg.h | 139 - .../inc/stm32f10x_pwr.h | 155 - .../inc/stm32f10x_rcc.h | 700 -- .../inc/stm32f10x_rtc.h | 134 - .../inc/stm32f10x_sdio.h | 530 -- .../inc/stm32f10x_spi.h | 490 - .../inc/stm32f10x_tim.h | 1040 --- .../inc/stm32f10x_usart.h | 409 - .../inc/stm32f10x_wwdg.h | 114 - .../STM32F10x_StdPeriph_Driver/src/misc.c | 223 - .../src/stm32f10x_adc.c | 1306 --- .../src/stm32f10x_bkp.c | 311 - .../src/stm32f10x_can.c | 990 --- .../src/stm32f10x_crc.c | 163 - .../src/stm32f10x_dac.c | 431 - .../src/stm32f10x_dbgmcu.c | 152 - .../src/stm32f10x_dma.c | 693 -- .../src/stm32f10x_exti.c | 268 - .../src/stm32f10x_flash.c | 874 -- .../src/stm32f10x_fsmc.c | 858 -- .../src/stm32f10x_gpio.c | 617 -- .../src/stm32f10x_i2c.c | 1152 --- .../src/stm32f10x_iwdg.c | 189 - .../src/stm32f10x_pwr.c | 311 - .../src/stm32f10x_rcc.c | 1447 --- .../src/stm32f10x_rtc.c | 341 - .../src/stm32f10x_sdio.c | 798 -- .../src/stm32f10x_spi.c | 907 -- .../src/stm32f10x_tim.c | 2799 ------ .../src/stm32f10x_usart.c | 967 -- .../src/stm32f10x_wwdg.c | 223 - bsp/stm32_lib3.1.0/app.c | 70 - bsp/stm32_lib3.1.0/board.c | 145 - bsp/stm32_lib3.1.0/main.c | 72 - bsp/stm32_lib3.1.0/project.Opt | 76 - bsp/stm32_lib3.1.0/project.Uv2 | 138 - bsp/stm32_lib3.1.0/rtconfig.h | 157 - bsp/stm32_lib3.1.0/stm32f10x_conf.h | 76 - bsp/stm32_lib3.1.0/stm32f10x_it.c | 968 -- bsp/stm32_lib3.1.0/stm32f10x_it.h | 134 - 151 files changed, 84175 deletions(-) delete mode 100644 bsp/stm32/application.c delete mode 100644 bsp/stm32/board.c delete mode 100644 bsp/stm32/board.h delete mode 100644 bsp/stm32/cortexm3_macro.s delete mode 100644 bsp/stm32/enc28j60.c delete mode 100644 bsp/stm32/enc28j60.h delete mode 100644 bsp/stm32/kbd.c delete mode 100644 bsp/stm32/kbd.h delete mode 100644 bsp/stm32/lcd.c delete mode 100644 bsp/stm32/lcd.h delete mode 100644 bsp/stm32/library/inc/cortexm3_macro.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_adc.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_bkp.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_can.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_crc.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_dac.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_dbgmcu.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_dma.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_exti.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_flash.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_fsmc.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_gpio.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_i2c.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_iwdg.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_lib.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_map.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_nvic.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_pwr.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_rcc.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_rtc.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_sdio.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_spi.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_systick.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_tim.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_type.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_usart.h delete mode 100644 bsp/stm32/library/inc/stm32f10x_wwdg.h delete mode 100644 bsp/stm32/library/src/stm32f10x_adc.c delete mode 100644 bsp/stm32/library/src/stm32f10x_bkp.c delete mode 100644 bsp/stm32/library/src/stm32f10x_can.c delete mode 100644 bsp/stm32/library/src/stm32f10x_crc.c delete mode 100644 bsp/stm32/library/src/stm32f10x_dac.c delete mode 100644 bsp/stm32/library/src/stm32f10x_dbgmcu.c delete mode 100644 bsp/stm32/library/src/stm32f10x_dma.c delete mode 100644 bsp/stm32/library/src/stm32f10x_exti.c delete mode 100644 bsp/stm32/library/src/stm32f10x_flash.c delete mode 100644 bsp/stm32/library/src/stm32f10x_fsmc.c delete mode 100644 bsp/stm32/library/src/stm32f10x_gpio.c delete mode 100644 bsp/stm32/library/src/stm32f10x_i2c.c delete mode 100644 bsp/stm32/library/src/stm32f10x_iwdg.c delete mode 100644 bsp/stm32/library/src/stm32f10x_lib.c delete mode 100644 bsp/stm32/library/src/stm32f10x_nvic.c delete mode 100644 bsp/stm32/library/src/stm32f10x_pwr.c delete mode 100644 bsp/stm32/library/src/stm32f10x_rcc.c delete mode 100644 bsp/stm32/library/src/stm32f10x_rtc.c delete mode 100644 bsp/stm32/library/src/stm32f10x_sdio.c delete mode 100644 bsp/stm32/library/src/stm32f10x_spi.c delete mode 100644 bsp/stm32/library/src/stm32f10x_systick.c delete mode 100644 bsp/stm32/library/src/stm32f10x_tim.c delete mode 100644 bsp/stm32/library/src/stm32f10x_usart.c delete mode 100644 bsp/stm32/library/src/stm32f10x_wwdg.c delete mode 100644 bsp/stm32/project.Opt delete mode 100644 bsp/stm32/project.Uv2 delete mode 100644 bsp/stm32/project.ewd delete mode 100644 bsp/stm32/project.ewp delete mode 100644 bsp/stm32/project.eww delete mode 100644 bsp/stm32/rtc.c delete mode 100644 bsp/stm32/rtc.h delete mode 100644 bsp/stm32/rtconfig.h delete mode 100644 bsp/stm32/sdcard.c delete mode 100644 bsp/stm32/sdcard.h delete mode 100644 bsp/stm32/startup.c delete mode 100644 bsp/stm32/stm32f10x.h delete mode 100644 bsp/stm32/stm32f10x_conf.h delete mode 100644 bsp/stm32/stm32f10x_flash.icf delete mode 100644 bsp/stm32/stm32f10x_it.c delete mode 100644 bsp/stm32/stm32f10x_it.h delete mode 100644 bsp/stm32/usart.c delete mode 100644 bsp/stm32/usart.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_cl.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_hd.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_ld.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_md.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_cl.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_hd.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_ld.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_md.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_cl.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_hd.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_ld.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_md.s delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/stm32f10x.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/system_stm32f10x.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/system_stm32f10x.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/Documentation/CMSIS_Core.htm delete mode 100644 bsp/stm32_lib3.1.0/Libraries/CMSIS/License.doc delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c delete mode 100644 bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c delete mode 100644 bsp/stm32_lib3.1.0/app.c delete mode 100644 bsp/stm32_lib3.1.0/board.c delete mode 100644 bsp/stm32_lib3.1.0/main.c delete mode 100644 bsp/stm32_lib3.1.0/project.Opt delete mode 100644 bsp/stm32_lib3.1.0/project.Uv2 delete mode 100644 bsp/stm32_lib3.1.0/rtconfig.h delete mode 100644 bsp/stm32_lib3.1.0/stm32f10x_conf.h delete mode 100644 bsp/stm32_lib3.1.0/stm32f10x_it.c delete mode 100644 bsp/stm32_lib3.1.0/stm32f10x_it.h diff --git a/bsp/stm32/application.c b/bsp/stm32/application.c deleted file mode 100644 index 639dcbea7..000000000 --- a/bsp/stm32/application.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * File : application.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2006, RT-Thread Development Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.rt-thread.org/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2009-01-05 Bernard the first version - */ - -/** - * @addtogroup STM32 - */ -/*@{*/ - -#include -#include - -#ifdef RT_USING_DFS -/* dfs init */ -#include -/* dfs filesystem:FAT filesystem init */ -#include -/* dfs filesystem:EFS filesystem init */ -#include -/* dfs Filesystem APIs */ -#include -#endif - -#ifdef RT_USING_LWIP -#include -#include -#endif - -/* thread phase init */ -void rt_init_thread_entry(void *parameter) -{ -/* Filesystem Initialization */ -#ifdef RT_USING_DFS - { - /* init the device filesystem */ - dfs_init(); - /* init the efsl filesystam*/ - efsl_init(); - - /* mount sd card fat partition 1 as root directory */ - if (dfs_mount("sd0", "/", "efs", 0, 0) == 0) - rt_kprintf("File System initialized!\n"); - else - rt_kprintf("File System init failed!\n"); - } -#endif - -/* LwIP Initialization */ -#ifdef RT_USING_LWIP - { - extern void lwip_sys_init(void); - - /* init lwip system */ - lwip_sys_init(); - rt_kprintf("TCP/IP initialized!\n"); - } -#endif -} - -int rt_application_init() -{ - rt_thread_t init_thread; - - init_thread = rt_thread_create("init", - rt_init_thread_entry, RT_NULL, - 2048, 80, 20); - rt_thread_startup(init_thread); - - return 0; -} - -/*@}*/ diff --git a/bsp/stm32/board.c b/bsp/stm32/board.c deleted file mode 100644 index f166f8763..000000000 --- a/bsp/stm32/board.c +++ /dev/null @@ -1,405 +0,0 @@ -/* - * File : board.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2006 - 2009 RT-Thread Develop Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://openlab.rt-thread.com/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2006-08-23 Bernard first implementation - */ - -#include -#include - -#include "stm32f10x_lib.h" - -static void rt_hw_console_init(void); - -/** - * @addtogroup STM32 - */ - -/*@{*/ - -ErrorStatus HSEStartUpStatus; - -/******************************************************************************* - * Function Name : RCC_Configuration - * Description : Configures the different system clocks. - * Input : None - * Output : None - * Return : None - *******************************************************************************/ -void RCC_Configuration(void) -{ - /* RCC system reset(for debug purpose) */ - RCC_DeInit(); - - /* Enable HSE */ - RCC_HSEConfig(RCC_HSE_ON); - - /* Wait till HSE is ready */ - HSEStartUpStatus = RCC_WaitForHSEStartUp(); - - if(HSEStartUpStatus == SUCCESS) - { - /* HCLK = SYSCLK */ - RCC_HCLKConfig(RCC_SYSCLK_Div1); - - /* PCLK2 = HCLK */ - RCC_PCLK2Config(RCC_HCLK_Div1); - /* PCLK1 = HCLK/2 */ - RCC_PCLK1Config(RCC_HCLK_Div2); - - /* Flash 2 wait state */ - FLASH_SetLatency(FLASH_Latency_2); - /* Enable Prefetch Buffer */ - FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); - - /* PLLCLK = 8MHz * 9 = 72 MHz */ - RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); - - /* Enable PLL */ - RCC_PLLCmd(ENABLE); - - /* Wait till PLL is ready */ - while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) ; - - /* Select PLL as system clock source */ - RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK); - - /* Wait till PLL is used as system clock source */ - while(RCC_GetSYSCLKSource() != 0x08) ; - } -} - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures Vector Table base location. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* - * Function Name : SysTick_Configuration - * Description : Configures the SysTick for OS tick. - * Input : None - * Output : None - * Return : None - *******************************************************************************/ -void SysTick_Configuration(void) -{ - RCC_ClocksTypeDef rcc_clocks; - rt_uint32_t cnts; - - RCC_GetClocksFreq(&rcc_clocks); - - cnts = (rt_uint32_t)rcc_clocks.HCLK_Frequency / RT_TICK_PER_SECOND; - - SysTick_SetReload(cnts); - SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK); - SysTick_CounterCmd(SysTick_Counter_Enable); - SysTick_ITConfig(ENABLE); -} - -extern void rt_hw_interrupt_thread_switch(void); -/** - * This is the timer interrupt service routine. - * - */ -void rt_hw_timer_handler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - rt_tick_increase(); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -} - -/******************************************************************************* -* Function Name : FSMC_SRAM_Init -* Description : Configures the FSMC and GPIOs to interface with the SRAM memory. -* This function must be called before any write/read operation -* on the SRAM. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_SRAM_Init(void) -{ - FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure; - FSMC_NORSRAMTimingInitTypeDef p; - GPIO_InitTypeDef GPIO_InitStructure; - - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOG | RCC_APB2Periph_GPIOE | - RCC_APB2Periph_GPIOF, ENABLE); - -/*-- GPIO Configuration ------------------------------------------------------*/ - /* SRAM Data lines configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | GPIO_Pin_9 | - GPIO_Pin_10 | GPIO_Pin_14 | GPIO_Pin_15; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | - GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | - GPIO_Pin_15; - GPIO_Init(GPIOE, &GPIO_InitStructure); - - /* SRAM Address lines configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | - GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_12 | GPIO_Pin_13 | - GPIO_Pin_14 | GPIO_Pin_15; - GPIO_Init(GPIOF, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | - GPIO_Pin_4 | GPIO_Pin_5; - GPIO_Init(GPIOG, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - /* NOE and NWE configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 |GPIO_Pin_5; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - /* NE3 configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; - GPIO_Init(GPIOG, &GPIO_InitStructure); - - /* NBL0, NBL1 configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1; - GPIO_Init(GPIOE, &GPIO_InitStructure); - -/*-- FSMC Configuration ------------------------------------------------------*/ - p.FSMC_AddressSetupTime = 0; - p.FSMC_AddressHoldTime = 0; - p.FSMC_DataSetupTime = 2; - p.FSMC_BusTurnAroundDuration = 0; - p.FSMC_CLKDivision = 0; - p.FSMC_DataLatency = 0; - p.FSMC_AccessMode = FSMC_AccessMode_A; - - FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM3; - FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; - FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; - FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; - FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; - FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; - FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; - - FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); - - /* Enable FSMC Bank1_SRAM Bank */ - FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM3, ENABLE); -} - -/******************************************************************************* -* Function Name : FSMC_NOR_Init -* Description : Configures the FSMC and GPIOs to interface with the NOR memory. -* This function must be called before any write/read operation -* on the NOR. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NOR_Init(void) -{ - FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure; - FSMC_NORSRAMTimingInitTypeDef p; - GPIO_InitTypeDef GPIO_InitStructure; - - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | - RCC_APB2Periph_GPIOF | RCC_APB2Periph_GPIOG, ENABLE); - - /*-- GPIO Configuration ------------------------------------------------------*/ - /* NOR Data lines configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | GPIO_Pin_9 | - GPIO_Pin_10 | GPIO_Pin_14 | GPIO_Pin_15; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | - GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | - GPIO_Pin_14 | GPIO_Pin_15; - GPIO_Init(GPIOE, &GPIO_InitStructure); - - /* NOR Address lines configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | - GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_12 | GPIO_Pin_13 | - GPIO_Pin_14 | GPIO_Pin_15; - GPIO_Init(GPIOF, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | - GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5; - GPIO_Init(GPIOG, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_6; - GPIO_Init(GPIOE, &GPIO_InitStructure); - - /* NOE and NWE configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 | GPIO_Pin_5; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - /* NE2 configuration */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; - GPIO_Init(GPIOG, &GPIO_InitStructure); - - /*-- FSMC Configuration ----------------------------------------------------*/ - p.FSMC_AddressSetupTime = 0x03; - p.FSMC_AddressHoldTime = 0x00; - p.FSMC_DataSetupTime = 0x04; - p.FSMC_BusTurnAroundDuration = 0x00; - p.FSMC_CLKDivision = 0x00; - p.FSMC_DataLatency = 0x00; - p.FSMC_AccessMode = FSMC_AccessMode_B; - - FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2; - FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; - FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_NOR; - FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; - FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; - FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; - FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; - - FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); - - /* Enable FSMC Bank1_NOR Bank */ - FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM2, ENABLE); -} - -/** - * This function will initial STM32 board. - */ -void rt_hw_board_init() -{ - /* Configure the system clocks */ - RCC_Configuration(); - - /* NVIC Configuration */ - NVIC_Configuration(); - - /* SRAM init */ - FSMC_SRAM_Init(); - - /* Configure the SysTick */ - SysTick_Configuration(); - - rt_hw_console_init(); -} - -/* init console to support rt_kprintf */ -static void rt_hw_console_init() -{ - /* Enable USART1 and GPIOA clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); - - /* GPIO configuration */ - { - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure USART1 Tx (PA.09) as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - /* Configure USART1 Rx (PA.10) as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOA, &GPIO_InitStructure); - } - - /* USART configuration */ - { - USART_InitTypeDef USART_InitStructure; - - /* USART1 configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - - USART Clock disabled - - USART CPOL: Clock is active low - - USART CPHA: Data is captured on the middle - - USART LastBit: The clock pulse of the last data bit is not output to - the SCLK pin - */ - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_Init(USART1, &USART_InitStructure); - /* Enable USART1 */ - USART_Cmd(USART1, ENABLE); - } -} - -/* write one character to serial, must not trigger interrupt */ -static void rt_hw_console_putc(const char c) -{ - /* - to be polite with serial console add a line feed - to the carriage return character - */ - if (c=='\n')rt_hw_console_putc('\r'); - - while (!(USART1->SR & USART_FLAG_TXE)); - USART1->DR = (c & 0x1FF); -} - -/** - * This function is used by rt_kprintf to display a string on console. - * - * @param str the displayed string - */ -void rt_hw_console_output(const char* str) -{ - while (*str) - { - rt_hw_console_putc (*str++); - } -} - -/*@}*/ diff --git a/bsp/stm32/board.h b/bsp/stm32/board.h deleted file mode 100644 index b1be7c47a..000000000 --- a/bsp/stm32/board.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * File : board.h - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2006, RT-Thread Develop Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://openlab.rt-thread.com/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2006-10-08 Bernard add board.h to this bsp - */ - -#ifndef __BOARD_H__ -#define __BOARD_H__ - -void rt_hw_board_led_on(int n); -void rt_hw_board_led_off(int n); -void rt_hw_board_init(void); - -void rt_hw_usart_init(void); -void rt_hw_sdcard_init(void); - -#endif diff --git a/bsp/stm32/cortexm3_macro.s b/bsp/stm32/cortexm3_macro.s deleted file mode 100644 index 5984b58ef..000000000 --- a/bsp/stm32/cortexm3_macro.s +++ /dev/null @@ -1,279 +0,0 @@ -;******************** (C) COPYRIGHT 2007 STMicroelectronics ******************** -;* File Name : cortexm3_macro.s -;* Author : MCD Application Team -;* Version : V1.1 -;* Date : 11/26/2007 -;* Description : Instruction wrappers for special Cortex-M3 instructions. -;******************************************************************************* -; THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - - THUMB - REQUIRE8 - PRESERVE8 - - AREA |.text|, CODE, READONLY, ALIGN=2 - - ; Exported functions - EXPORT __WFI - EXPORT __WFE - EXPORT __SEV - EXPORT __ISB - EXPORT __DSB - EXPORT __DMB - EXPORT __SVC - EXPORT __MRS_CONTROL - EXPORT __MSR_CONTROL - EXPORT __MRS_PSP - EXPORT __MSR_PSP - EXPORT __MRS_MSP - EXPORT __MSR_MSP - EXPORT __SETPRIMASK - EXPORT __RESETPRIMASK - EXPORT __SETFAULTMASK - EXPORT __RESETFAULTMASK - EXPORT __BASEPRICONFIG - EXPORT __GetBASEPRI - EXPORT __REV_HalfWord - EXPORT __REV_Word - -;******************************************************************************* -; Function Name : __WFI -; Description : Assembler function for the WFI instruction. -; Input : None -; Return : None -;******************************************************************************* -__WFI - - WFI - BX r14 - -;******************************************************************************* -; Function Name : __WFE -; Description : Assembler function for the WFE instruction. -; Input : None -; Return : None -;******************************************************************************* -__WFE - - WFE - BX r14 - -;******************************************************************************* -; Function Name : __SEV -; Description : Assembler function for the SEV instruction. -; Input : None -; Return : None -;******************************************************************************* -__SEV - - SEV - BX r14 - -;******************************************************************************* -; Function Name : __ISB -; Description : Assembler function for the ISB instruction. -; Input : None -; Return : None -;******************************************************************************* -__ISB - - ISB - BX r14 - -;******************************************************************************* -; Function Name : __DSB -; Description : Assembler function for the DSB instruction. -; Input : None -; Return : None -;******************************************************************************* -__DSB - - DSB - BX r14 - -;******************************************************************************* -; Function Name : __DMB -; Description : Assembler function for the DMB instruction. -; Input : None -; Return : None -;******************************************************************************* -__DMB - - DMB - BX r14 - -;******************************************************************************* -; Function Name : __SVC -; Description : Assembler function for the SVC instruction. -; Input : None -; Return : None -;******************************************************************************* -__SVC - - SVC 0x01 - BX r14 - -;******************************************************************************* -; Function Name : __MRS_CONTROL -; Description : Assembler function for the MRS instruction. -; Input : None -; Return : - r0 : Cortex-M3 CONTROL register value. -;******************************************************************************* -__MRS_CONTROL - - MRS r0, CONTROL - BX r14 - -;******************************************************************************* -; Function Name : __MSR_CONTROL -; Description : Assembler function for the MSR instruction. -; Input : - r0 : Cortex-M3 CONTROL register new value. -; Return : None -;******************************************************************************* -__MSR_CONTROL - - MSR CONTROL, r0 - ISB - BX r14 - -;******************************************************************************* -; Function Name : __MRS_PSP -; Description : Assembler function for the MRS instruction. -; Input : None -; Return : - r0 : Process Stack value. -;******************************************************************************* -__MRS_PSP - - MRS r0, PSP - BX r14 - -;******************************************************************************* -; Function Name : __MSR_PSP -; Description : Assembler function for the MSR instruction. -; Input : - r0 : Process Stack new value. -; Return : None -;******************************************************************************* -__MSR_PSP - - MSR PSP, r0 ; set Process Stack value - BX r14 - -;******************************************************************************* -; Function Name : __MRS_MSP -; Description : Assembler function for the MRS instruction. -; Input : None -; Return : - r0 : Main Stack value. -;******************************************************************************* -__MRS_MSP - - MRS r0, MSP - BX r14 - -;******************************************************************************* -; Function Name : __MSR_MSP -; Description : Assembler function for the MSR instruction. -; Input : - r0 : Main Stack new value. -; Return : None -;******************************************************************************* -__MSR_MSP - - MSR MSP, r0 ; set Main Stack value - BX r14 - -;******************************************************************************* -; Function Name : __SETPRIMASK -; Description : Assembler function to set the PRIMASK. -; Input : None -; Return : None -;******************************************************************************* -__SETPRIMASK - - CPSID i - BX r14 - -;******************************************************************************* -; Function Name : __RESETPRIMASK -; Description : Assembler function to reset the PRIMASK. -; Input : None -; Return : None -;******************************************************************************* -__RESETPRIMASK - - CPSIE i - BX r14 - -;******************************************************************************* -; Function Name : __SETFAULTMASK -; Description : Assembler function to set the FAULTMASK. -; Input : None -; Return : None -;******************************************************************************* -__SETFAULTMASK - - CPSID f - BX r14 - -;******************************************************************************* -; Function Name : __RESETFAULTMASK -; Description : Assembler function to reset the FAULTMASK. -; Input : None -; Return : None -;******************************************************************************* -__RESETFAULTMASK - - CPSIE f - BX r14 - -;******************************************************************************* -; Function Name : __BASEPRICONFIG -; Description : Assembler function to set the Base Priority. -; Input : - r0 : Base Priority new value -; Return : None -;******************************************************************************* -__BASEPRICONFIG - - MSR BASEPRI, r0 - BX r14 - -;******************************************************************************* -; Function Name : __GetBASEPRI -; Description : Assembler function to get the Base Priority value. -; Input : None -; Return : - r0 : Base Priority value -;******************************************************************************* -__GetBASEPRI - - MRS r0, BASEPRI_MAX - BX r14 - -;******************************************************************************* -; Function Name : __REV_HalfWord -; Description : Reverses the byte order in HalfWord(16-bit) input variable. -; Input : - r0 : specifies the input variable -; Return : - r0 : holds tve variable value after byte reversing. -;******************************************************************************* -__REV_HalfWord - - REV16 r0, r0 - BX r14 - -;******************************************************************************* -; Function Name : __REV_Word -; Description : Reverses the byte order in Word(32-bit) input variable. -; Input : - r0 : specifies the input variable -; Return : - r0 : holds tve variable value after byte reversing. -;******************************************************************************* -__REV_Word - - REV r0, r0 - BX r14 - - END - -;******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32/enc28j60.c b/bsp/stm32/enc28j60.c deleted file mode 100644 index 841b740e9..000000000 --- a/bsp/stm32/enc28j60.c +++ /dev/null @@ -1,727 +0,0 @@ -#include "enc28j60.h" - -#include -#include "lwipopts.h" -#include "stm32f10x_lib.h" - -#define MAX_ADDR_LEN 6 - -// #define CSACTIVE GPIO_ResetBits(GPIOB, GPIO_Pin_12); -// #define CSPASSIVE GPIO_SetBits(GPIOB, GPIO_Pin_12); -#define CSACTIVE GPIOB->BRR = GPIO_Pin_12; -#define CSPASSIVE GPIOB->BSRR = GPIO_Pin_12; - -struct net_device -{ - /* inherit from ethernet device */ - struct eth_device parent; - - /* interface address info. */ - rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */ -}; - -static struct net_device enc28j60_dev_entry; -static struct net_device *enc28j60_dev =&enc28j60_dev_entry; -static rt_uint8_t Enc28j60Bank; -static rt_uint16_t NextPacketPtr; -static struct rt_semaphore tx_sem; - -void _delay_us(rt_uint32_t us) -{ - rt_uint32_t len; - for (;us > 0; us --) - for (len = 0; len < 20; len++ ); -} - -void delay_ms(rt_uint32_t ms) -{ - rt_uint32_t len; - for (;ms > 0; ms --) - for (len = 0; len < 100; len++ ); -} - -rt_uint8_t spi_read_op(rt_uint8_t op, rt_uint8_t address) -{ - int temp=0; - CSACTIVE; - - SPI_I2S_SendData(SPI2, (op | (address & ADDR_MASK))); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - SPI_I2S_ReceiveData(SPI2); - SPI_I2S_SendData(SPI2, 0x00); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - - // do dummy read if needed (for mac and mii, see datasheet page 29) - if(address & 0x80) - { - SPI_I2S_ReceiveData(SPI2); - SPI_I2S_SendData(SPI2, 0x00); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - } - // release CS - - temp=SPI_I2S_ReceiveData(SPI2); - // for(t=0;t<20;t++); - CSPASSIVE; - return (temp); -} - -void spi_write_op(rt_uint8_t op, rt_uint8_t address, rt_uint8_t data) -{ - rt_uint32_t level; - - level = rt_hw_interrupt_disable(); - - CSACTIVE; - SPI_I2S_SendData(SPI2, op | (address & ADDR_MASK)); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - SPI_I2S_SendData(SPI2,data); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - CSPASSIVE; - - rt_hw_interrupt_enable(level); -} - -void enc28j60_set_bank(rt_uint8_t address) -{ - // set the bank (if needed) - if((address & BANK_MASK) != Enc28j60Bank) - { - // set the bank - spi_write_op(ENC28J60_BIT_FIELD_CLR, ECON1, (ECON1_BSEL1|ECON1_BSEL0)); - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, (address & BANK_MASK)>>5); - Enc28j60Bank = (address & BANK_MASK); - } -} - -rt_uint8_t spi_read(rt_uint8_t address) -{ - // set the bank - enc28j60_set_bank(address); - // do the read - return spi_read_op(ENC28J60_READ_CTRL_REG, address); -} - -void spi_write(rt_uint8_t address, rt_uint8_t data) -{ - // set the bank - enc28j60_set_bank(address); - // do the write - spi_write_op(ENC28J60_WRITE_CTRL_REG, address, data); -} - -void enc28j60_phy_write(rt_uint8_t address, rt_uint16_t data) -{ - // set the PHY register address - spi_write(MIREGADR, address); - - // write the PHY data - spi_write(MIWRL, data); - spi_write(MIWRH, data>>8); - - // wait until the PHY write completes - while(spi_read(MISTAT) & MISTAT_BUSY) - { - _delay_us(15); - } -} - -// read upper 8 bits -rt_uint16_t enc28j60_phy_read(rt_uint8_t address) -{ - // Set the right address and start the register read operation - spi_write(MIREGADR, address); - spi_write(MICMD, MICMD_MIIRD); - - _delay_us(15); - - // wait until the PHY read completes - while(spi_read(MISTAT) & MISTAT_BUSY); - - // reset reading bit - spi_write(MICMD, 0x00); - - return (spi_read(MIRDH)); -} - -void enc28j60_clkout(rt_uint8_t clk) -{ - //setup clkout: 2 is 12.5MHz: - spi_write(ECOCON, clk & 0x7); -} - -/* - * Access the PHY to determine link status - */ -static void enc28j60_check_link_status() -{ - rt_uint16_t reg; - int duplex; - - reg = enc28j60_phy_read(PHSTAT2); - duplex = reg & PHSTAT2_DPXSTAT; - - if (reg & PHSTAT2_LSTAT) - { - /* on */ - } - else - { - /* off */ - } -} - -#ifdef RT_USING_FINSH -#include -/* - * Debug routine to dump useful register contents - */ -static void enc28j60(void) -{ - rt_kprintf("-- enc28j60 registers:\n"); - rt_kprintf("HwRevID: 0x%02x\n", spi_read(EREVID)); - rt_kprintf("Cntrl: ECON1 ECON2 ESTAT EIR EIE\n"); - rt_kprintf(" 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",spi_read(ECON1), spi_read(ECON2), spi_read(ESTAT), spi_read(EIR), spi_read(EIE)); - rt_kprintf("MAC : MACON1 MACON3 MACON4\n"); - rt_kprintf(" 0x%02x 0x%02x 0x%02x\n", spi_read(MACON1), spi_read(MACON3), spi_read(MACON4)); - rt_kprintf("Rx : ERXST ERXND ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"); - rt_kprintf(" 0x%04x 0x%04x 0x%04x 0x%04x ", - (spi_read(ERXSTH) << 8) | spi_read(ERXSTL), - (spi_read(ERXNDH) << 8) | spi_read(ERXNDL), - (spi_read(ERXWRPTH) << 8) | spi_read(ERXWRPTL), - (spi_read(ERXRDPTH) << 8) | spi_read(ERXRDPTL)); - rt_kprintf("0x%02x 0x%02x 0x%04x\n", spi_read(ERXFCON), spi_read(EPKTCNT), - (spi_read(MAMXFLH) << 8) | spi_read(MAMXFLL)); - - rt_kprintf("Tx : ETXST ETXND MACLCON1 MACLCON2 MAPHSUP\n"); - rt_kprintf(" 0x%04x 0x%04x 0x%02x 0x%02x 0x%02x\n", - (spi_read(ETXSTH) << 8) | spi_read(ETXSTL), - (spi_read(ETXNDH) << 8) | spi_read(ETXNDL), - spi_read(MACLCON1), spi_read(MACLCON2), spi_read(MAPHSUP)); -} -FINSH_FUNCTION_EXPORT(enc28j60, dump enc28j60 registers) -#endif - -/* - * RX handler - * ignore PKTIF because is unreliable! (look at the errata datasheet) - * check EPKTCNT is the suggested workaround. - * We don't need to clear interrupt flag, automatically done when - * enc28j60_hw_rx() decrements the packet counter. - * Returns how many packet processed. - */ -void enc28j60_isr() -{ - /* Variable definitions can be made now. */ - volatile rt_uint32_t eir, pk_counter; - volatile rt_bool_t rx_activiated; - - rx_activiated = RT_FALSE; - - /* get EIR */ - eir = spi_read(EIR); - // rt_kprintf("eir: 0x%08x\n", eir); - - do - { - /* errata #4, PKTIF does not reliable */ - pk_counter = spi_read(EPKTCNT); - if (pk_counter) - { - rt_err_t result; - /* a frame has been received */ - result = eth_device_ready((struct eth_device*)&(enc28j60_dev->parent)); - RT_ASSERT(result == RT_EOK); - - // switch to bank 0 - enc28j60_set_bank(EIE); - // disable rx interrutps - spi_write_op(ENC28J60_BIT_FIELD_CLR, EIE, EIE_PKTIE); - } - - /* clear PKTIF */ - if (eir & EIR_PKTIF) - { - enc28j60_set_bank(EIR); - spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_PKTIF); - - rx_activiated = RT_TRUE; - } - - /* clear DMAIF */ - if (eir & EIR_DMAIF) - { - enc28j60_set_bank(EIR); - spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_DMAIF); - } - - /* LINK changed handler */ - if ( eir & EIR_LINKIF) - { - enc28j60_check_link_status(); - - /* read PHIR to clear the flag */ - enc28j60_phy_read(PHIR); - - enc28j60_set_bank(EIR); - spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_LINKIF); - } - - if (eir & EIR_TXIF) - { - /* A frame has been transmitted. */ - rt_sem_release(&tx_sem); - - enc28j60_set_bank(EIR); - spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_TXIF); - } - eir = spi_read(EIR); - // rt_kprintf("inner eir: 0x%08x\n", eir); - } while ((rx_activiated != RT_TRUE && eir != 0)); -} - -/* RT-Thread Device Interface */ - -/* initialize the interface */ -rt_err_t enc28j60_init(rt_device_t dev) -{ - CSPASSIVE; - - // perform system reset - spi_write_op(ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET); - delay_ms(50); - NextPacketPtr = RXSTART_INIT; - - // Rx start - spi_write(ERXSTL, RXSTART_INIT&0xFF); - spi_write(ERXSTH, RXSTART_INIT>>8); - // set receive pointer address - spi_write(ERXRDPTL, RXSTOP_INIT&0xFF); - spi_write(ERXRDPTH, RXSTOP_INIT>>8); - // RX end - spi_write(ERXNDL, RXSTOP_INIT&0xFF); - spi_write(ERXNDH, RXSTOP_INIT>>8); - - // TX start - spi_write(ETXSTL, TXSTART_INIT&0xFF); - spi_write(ETXSTH, TXSTART_INIT>>8); - // set transmission pointer address - spi_write(EWRPTL, TXSTART_INIT&0xFF); - spi_write(EWRPTH, TXSTART_INIT>>8); - // TX end - spi_write(ETXNDL, TXSTOP_INIT&0xFF); - spi_write(ETXNDH, TXSTOP_INIT>>8); - - // do bank 1 stuff, packet filter: - // For broadcast packets we allow only ARP packtets - // All other packets should be unicast only for our mac (MAADR) - // - // The pattern to match on is therefore - // Type ETH.DST - // ARP BROADCAST - // 06 08 -- ff ff ff ff ff ff -> ip checksum for theses bytes=f7f9 - // in binary these poitions are:11 0000 0011 1111 - // This is hex 303F->EPMM0=0x3f,EPMM1=0x30 - spi_write(ERXFCON, ERXFCON_UCEN|ERXFCON_CRCEN|ERXFCON_BCEN); - - // do bank 2 stuff - // enable MAC receive - spi_write(MACON1, MACON1_MARXEN|MACON1_TXPAUS|MACON1_RXPAUS); - // enable automatic padding to 60bytes and CRC operations - // spi_write_op(ENC28J60_BIT_FIELD_SET, MACON3, MACON3_PADCFG0|MACON3_TXCRCEN|MACON3_FRMLNEN); - spi_write_op(ENC28J60_BIT_FIELD_SET, MACON3, MACON3_PADCFG0 | MACON3_TXCRCEN | MACON3_FRMLNEN | MACON3_FULDPX); - // bring MAC out of reset - - // set inter-frame gap (back-to-back) - // spi_write(MABBIPG, 0x12); - spi_write(MABBIPG, 0x15); - - spi_write(MACON4, MACON4_DEFER); - spi_write(MACLCON2, 63); - - // set inter-frame gap (non-back-to-back) - spi_write(MAIPGL, 0x12); - spi_write(MAIPGH, 0x0C); - - // Set the maximum packet size which the controller will accept - // Do not send packets longer than MAX_FRAMELEN: - spi_write(MAMXFLL, MAX_FRAMELEN&0xFF); - spi_write(MAMXFLH, MAX_FRAMELEN>>8); - - // do bank 3 stuff - // write MAC address - // NOTE: MAC address in ENC28J60 is byte-backward - spi_write(MAADR0, enc28j60_dev->dev_addr[5]); - spi_write(MAADR1, enc28j60_dev->dev_addr[4]); - spi_write(MAADR2, enc28j60_dev->dev_addr[3]); - spi_write(MAADR3, enc28j60_dev->dev_addr[2]); - spi_write(MAADR4, enc28j60_dev->dev_addr[1]); - spi_write(MAADR5, enc28j60_dev->dev_addr[0]); - - /* output off */ - spi_write(ECOCON, 0x00); - - // enc28j60_phy_write(PHCON1, 0x00); - enc28j60_phy_write(PHCON1, PHCON1_PDPXMD); // full duplex - // no loopback of transmitted frames - enc28j60_phy_write(PHCON2, PHCON2_HDLDIS); - - enc28j60_set_bank(ECON2); - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON2, ECON2_AUTOINC); - - // switch to bank 0 - enc28j60_set_bank(ECON1); - // enable interrutps - spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_INTIE|EIE_PKTIE|EIR_TXIF); - // enable packet reception - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN); - - /* clock out */ - // enc28j60_clkout(2); - - enc28j60_phy_write(PHLCON, 0xD76); //0x476 - delay_ms(20); - - rt_kprintf("enc28j60 init ok!\n"); - - return RT_EOK; -} - -/* control the interface */ -rt_err_t enc28j60_control(rt_device_t dev, rt_uint8_t cmd, void *args) -{ - switch(cmd) - { - case NIOCTL_GADDR: - /* get mac address */ - if(args) rt_memcpy(args, enc28j60_dev_entry.dev_addr, 6); - else return -RT_ERROR; - break; - - default : - break; - } - - return RT_EOK; -} - -/* Open the ethernet interface */ -rt_err_t enc28j60_open(rt_device_t dev, rt_uint16_t oflag) -{ - return RT_EOK; -} - -/* Close the interface */ -rt_err_t enc28j60_close(rt_device_t dev) -{ - return RT_EOK; -} - -/* Read */ -rt_size_t enc28j60_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) -{ - rt_set_errno(-RT_ENOSYS); - return 0; -} - -/* Write */ -rt_size_t enc28j60_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) -{ - rt_set_errno(-RT_ENOSYS); - return 0; -} - -/* ethernet device interface */ -/* - * Transmit packet. - */ -rt_err_t enc28j60_tx( rt_device_t dev, struct pbuf* p) -{ - struct pbuf* q; - rt_uint32_t len; - rt_uint8_t* ptr; - - // rt_kprintf("tx pbuf: 0x%08x\n", p); - - /* lock tx operation */ - rt_sem_take(&tx_sem, RT_WAITING_FOREVER); - - // Set the write pointer to start of transmit buffer area - spi_write(EWRPTL, TXSTART_INIT&0xFF); - spi_write(EWRPTH, TXSTART_INIT>>8); - // Set the TXND pointer to correspond to the packet size given - spi_write(ETXNDL, (TXSTART_INIT+ p->tot_len + 1)&0xFF); - spi_write(ETXNDH, (TXSTART_INIT+ p->tot_len + 1)>>8); - - // write per-packet control byte (0x00 means use macon3 settings) - spi_write_op(ENC28J60_WRITE_BUF_MEM, 0, 0x00); - - for (q = p; q != NULL; q = q->next) - { - CSACTIVE; - - SPI_I2S_SendData(SPI2, ENC28J60_WRITE_BUF_MEM); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - - len = q->len; - ptr = q->payload; - while(len) - { - SPI_I2S_SendData(SPI2,*ptr) ; - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);; - ptr++; - - len--; - } - - CSPASSIVE; - } - - // send the contents of the transmit buffer onto the network - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_TXRTS); - // Reset the transmit logic problem. See Rev. B4 Silicon Errata point 12. - if( (spi_read(EIR) & EIR_TXERIF) ) - { - spi_write_op(ENC28J60_BIT_FIELD_CLR, ECON1, ECON1_TXRTS); - } - - // rt_kprintf("tx ok\n"); - - return RT_EOK; -} - -struct pbuf *enc28j60_rx(rt_device_t dev) -{ - struct pbuf* p; - rt_uint32_t len; - rt_uint16_t rxstat; - rt_uint32_t pk_counter; - - p = RT_NULL; - - pk_counter = spi_read(EPKTCNT); - if (pk_counter) - { - // Set the read pointer to the start of the received packet - spi_write(ERDPTL, (NextPacketPtr)); - spi_write(ERDPTH, (NextPacketPtr)>>8); - - // read the next packet pointer - NextPacketPtr = spi_read_op(ENC28J60_READ_BUF_MEM, 0); - NextPacketPtr |= spi_read_op(ENC28J60_READ_BUF_MEM, 0)<<8; - - // read the packet length (see datasheet page 43) - len = spi_read_op(ENC28J60_READ_BUF_MEM, 0); //0x54 - len |= spi_read_op(ENC28J60_READ_BUF_MEM, 0) <<8; //5554 - - len-=4; //remove the CRC count - - // read the receive status (see datasheet page 43) - rxstat = spi_read_op(ENC28J60_READ_BUF_MEM, 0); - rxstat |= ((rt_uint16_t)spi_read_op(ENC28J60_READ_BUF_MEM, 0))<<8; - - // check CRC and symbol errors (see datasheet page 44, table 7-3): - // The ERXFCON.CRCEN is set by default. Normally we should not - // need to check this. - if ((rxstat & 0x80)==0) - { - // invalid - len=0; - } - else - { - /* allocation pbuf */ - p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM); - if (p != RT_NULL) - { - rt_uint8_t* data; - struct pbuf* q; - - for (q = p; q != RT_NULL; q= q->next) - { - data = q->payload; - len = q->len; - - CSACTIVE; - - SPI_I2S_SendData(SPI2,ENC28J60_READ_BUF_MEM); - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - - SPI_I2S_ReceiveData(SPI2); - - while(len) - { - len--; - SPI_I2S_SendData(SPI2,0x00) ; - while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET); - - *data= SPI_I2S_ReceiveData(SPI2); - data++; - } - - CSPASSIVE; - } - } - } - - // Move the RX read pointer to the start of the next received packet - // This frees the memory we just read out - spi_write(ERXRDPTL, (NextPacketPtr)); - spi_write(ERXRDPTH, (NextPacketPtr)>>8); - - // decrement the packet counter indicate we are done with this packet - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON2, ECON2_PKTDEC); - } - else - { - rt_uint32_t level; - /* lock enc28j60 */ - level = rt_hw_interrupt_disable(); - - // switch to bank 0 - enc28j60_set_bank(EIE); - // enable interrutps - spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_PKTIE); - // switch to bank 0 - enc28j60_set_bank(ECON1); - // enable packet reception - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN); - - /* enable interrupt */ - rt_hw_interrupt_enable(level); - } - - return p; -} - -static void RCC_Configuration(void) -{ - /* enable spi2 clock */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE); - - /* enable gpiob port clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE); -} - -static void NVIC_Configuration(void) -{ - NVIC_InitTypeDef NVIC_InitStructure; - - /* Configure one bit for preemption priority */ - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); - - /* Enable the EXTI0 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -} - -static void GPIO_Configuration() -{ - GPIO_InitTypeDef GPIO_InitStructure; - EXTI_InitTypeDef EXTI_InitStructure; - - /* configure PB0 as external interrupt */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOB, &GPIO_InitStructure); - - /* Configure SPI2 pins: SCK, MISO and MOSI ----------------------------*/ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOB, &GPIO_InitStructure); - - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOB, &GPIO_InitStructure); - - /* Connect ENC28J60 EXTI Line to GPIOB Pin 0 */ - GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0); - - /* Configure ENC28J60 EXTI Line to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_Line0; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); - - /* Clear the Key Button EXTI line pending bit */ - EXTI_ClearITPendingBit(EXTI_Line0); -} - -static void SetupSPI (void) -{ - SPI_InitTypeDef SPI_InitStructure; - SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex; - SPI_InitStructure.SPI_Mode = SPI_Mode_Master; - SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b; - SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low; - SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge; - SPI_InitStructure.SPI_NSS = SPI_NSS_Soft; - SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4; - SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB; - SPI_InitStructure.SPI_CRCPolynomial = 7; - SPI_Init(SPI2, &SPI_InitStructure); - SPI_Cmd(SPI2, ENABLE); -} - -static rt_timer_t enc28j60_timer; -void rt_hw_enc28j60_timeout(void* parameter) -{ - // switch to bank 0 - enc28j60_set_bank(EIE); - // enable interrutps - spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_PKTIE); - // switch to bank 0 - enc28j60_set_bank(ECON1); - // enable packet reception - spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN); - - enc28j60_isr(); -} - -int rt_hw_enc28j60_init() -{ - rt_err_t result; - - /* configuration PB5 as INT */ - RCC_Configuration(); - NVIC_Configuration(); - GPIO_Configuration(); - SetupSPI(); - - /* init rt-thread device interface */ - enc28j60_dev_entry.parent.parent.init = enc28j60_init; - enc28j60_dev_entry.parent.parent.open = enc28j60_open; - enc28j60_dev_entry.parent.parent.close = enc28j60_close; - enc28j60_dev_entry.parent.parent.read = enc28j60_read; - enc28j60_dev_entry.parent.parent.write = enc28j60_write; - enc28j60_dev_entry.parent.parent.control = enc28j60_control; - enc28j60_dev_entry.parent.eth_rx = enc28j60_rx; - enc28j60_dev_entry.parent.eth_tx = enc28j60_tx; - - /* Update MAC address */ - enc28j60_dev_entry.dev_addr[0] = 0x1e; - enc28j60_dev_entry.dev_addr[1] = 0x30; - enc28j60_dev_entry.dev_addr[2] = 0x6c; - enc28j60_dev_entry.dev_addr[3] = 0xa2; - enc28j60_dev_entry.dev_addr[4] = 0x45; - enc28j60_dev_entry.dev_addr[5] = 0x5e; - - rt_sem_init(&tx_sem, "emac", 1, RT_IPC_FLAG_FIFO); - - result = eth_device_init(&(enc28j60_dev->parent), "E0"); - - /* workaround for enc28j60 interrupt */ - enc28j60_timer = rt_timer_create("etimer", - rt_hw_enc28j60_timeout, RT_NULL, - 50, RT_TIMER_FLAG_PERIODIC); - if (enc28j60_timer != RT_NULL) - rt_timer_start(enc28j60_timer); - - return RT_EOK; -} diff --git a/bsp/stm32/enc28j60.h b/bsp/stm32/enc28j60.h deleted file mode 100644 index c8d27c2a5..000000000 --- a/bsp/stm32/enc28j60.h +++ /dev/null @@ -1,256 +0,0 @@ -#ifndef __ENC28J60_H__ -#define __ENC28J60_H__ - -#include - -// ENC28J60 Control Registers -// Control register definitions are a combination of address, -// bank number, and Ethernet/MAC/PHY indicator bits. -// - Register address (bits 0-4) -// - Bank number (bits 5-6) -// - MAC/PHY indicator (bit 7) -#define ADDR_MASK 0x1F -#define BANK_MASK 0x60 -#define SPRD_MASK 0x80 -// All-bank registers -#define EIE 0x1B -#define EIR 0x1C -#define ESTAT 0x1D -#define ECON2 0x1E -#define ECON1 0x1F -// Bank 0 registers -#define ERDPTL (0x00|0x00) -#define ERDPTH (0x01|0x00) -#define EWRPTL (0x02|0x00) -#define EWRPTH (0x03|0x00) -#define ETXSTL (0x04|0x00) -#define ETXSTH (0x05|0x00) -#define ETXNDL (0x06|0x00) -#define ETXNDH (0x07|0x00) -#define ERXSTL (0x08|0x00) -#define ERXSTH (0x09|0x00) -#define ERXNDL (0x0A|0x00) -#define ERXNDH (0x0B|0x00) -#define ERXRDPTL (0x0C|0x00) -#define ERXRDPTH (0x0D|0x00) -#define ERXWRPTL (0x0E|0x00) -#define ERXWRPTH (0x0F|0x00) -#define EDMASTL (0x10|0x00) -#define EDMASTH (0x11|0x00) -#define EDMANDL (0x12|0x00) -#define EDMANDH (0x13|0x00) -#define EDMADSTL (0x14|0x00) -#define EDMADSTH (0x15|0x00) -#define EDMACSL (0x16|0x00) -#define EDMACSH (0x17|0x00) -// Bank 1 registers -#define EHT0 (0x00|0x20) -#define EHT1 (0x01|0x20) -#define EHT2 (0x02|0x20) -#define EHT3 (0x03|0x20) -#define EHT4 (0x04|0x20) -#define EHT5 (0x05|0x20) -#define EHT6 (0x06|0x20) -#define EHT7 (0x07|0x20) -#define EPMM0 (0x08|0x20) -#define EPMM1 (0x09|0x20) -#define EPMM2 (0x0A|0x20) -#define EPMM3 (0x0B|0x20) -#define EPMM4 (0x0C|0x20) -#define EPMM5 (0x0D|0x20) -#define EPMM6 (0x0E|0x20) -#define EPMM7 (0x0F|0x20) -#define EPMCSL (0x10|0x20) -#define EPMCSH (0x11|0x20) -#define EPMOL (0x14|0x20) -#define EPMOH (0x15|0x20) -#define EWOLIE (0x16|0x20) -#define EWOLIR (0x17|0x20) -#define ERXFCON (0x18|0x20) -#define EPKTCNT (0x19|0x20) -// Bank 2 registers -#define MACON1 (0x00|0x40|0x80) -#define MACON2 (0x01|0x40|0x80) -#define MACON3 (0x02|0x40|0x80) -#define MACON4 (0x03|0x40|0x80) -#define MABBIPG (0x04|0x40|0x80) -#define MAIPGL (0x06|0x40|0x80) -#define MAIPGH (0x07|0x40|0x80) -#define MACLCON1 (0x08|0x40|0x80) -#define MACLCON2 (0x09|0x40|0x80) -#define MAMXFLL (0x0A|0x40|0x80) -#define MAMXFLH (0x0B|0x40|0x80) -#define MAPHSUP (0x0D|0x40|0x80) -#define MICON (0x11|0x40|0x80) -#define MICMD (0x12|0x40|0x80) -#define MIREGADR (0x14|0x40|0x80) -#define MIWRL (0x16|0x40|0x80) -#define MIWRH (0x17|0x40|0x80) -#define MIRDL (0x18|0x40|0x80) -#define MIRDH (0x19|0x40|0x80) -// Bank 3 registers -#define MAADR1 (0x00|0x60|0x80) -#define MAADR0 (0x01|0x60|0x80) -#define MAADR3 (0x02|0x60|0x80) -#define MAADR2 (0x03|0x60|0x80) -#define MAADR5 (0x04|0x60|0x80) -#define MAADR4 (0x05|0x60|0x80) -#define EBSTSD (0x06|0x60) -#define EBSTCON (0x07|0x60) -#define EBSTCSL (0x08|0x60) -#define EBSTCSH (0x09|0x60) -#define MISTAT (0x0A|0x60|0x80) -#define EREVID (0x12|0x60) -#define ECOCON (0x15|0x60) -#define EFLOCON (0x17|0x60) -#define EPAUSL (0x18|0x60) -#define EPAUSH (0x19|0x60) -// PHY registers -#define PHCON1 0x00 -#define PHSTAT1 0x01 -#define PHHID1 0x02 -#define PHHID2 0x03 -#define PHCON2 0x10 -#define PHSTAT2 0x11 -#define PHIE 0x12 -#define PHIR 0x13 -#define PHLCON 0x14 - -// ENC28J60 ERXFCON Register Bit Definitions -#define ERXFCON_UCEN 0x80 -#define ERXFCON_ANDOR 0x40 -#define ERXFCON_CRCEN 0x20 -#define ERXFCON_PMEN 0x10 -#define ERXFCON_MPEN 0x08 -#define ERXFCON_HTEN 0x04 -#define ERXFCON_MCEN 0x02 -#define ERXFCON_BCEN 0x01 -// ENC28J60 EIE Register Bit Definitions -#define EIE_INTIE 0x80 -#define EIE_PKTIE 0x40 -#define EIE_DMAIE 0x20 -#define EIE_LINKIE 0x10 -#define EIE_TXIE 0x08 -#define EIE_WOLIE 0x04 -#define EIE_TXERIE 0x02 -#define EIE_RXERIE 0x01 -// ENC28J60 EIR Register Bit Definitions -#define EIR_PKTIF 0x40 -#define EIR_DMAIF 0x20 -#define EIR_LINKIF 0x10 -#define EIR_TXIF 0x08 -#define EIR_WOLIF 0x04 -#define EIR_TXERIF 0x02 -#define EIR_RXERIF 0x01 -// ENC28J60 ESTAT Register Bit Definitions -#define ESTAT_INT 0x80 -#define ESTAT_LATECOL 0x10 -#define ESTAT_RXBUSY 0x04 -#define ESTAT_TXABRT 0x02 -#define ESTAT_CLKRDY 0x01 -// ENC28J60 ECON2 Register Bit Definitions -#define ECON2_AUTOINC 0x80 -#define ECON2_PKTDEC 0x40 -#define ECON2_PWRSV 0x20 -#define ECON2_VRPS 0x08 -// ENC28J60 ECON1 Register Bit Definitions -#define ECON1_TXRST 0x80 -#define ECON1_RXRST 0x40 -#define ECON1_DMAST 0x20 -#define ECON1_CSUMEN 0x10 -#define ECON1_TXRTS 0x08 -#define ECON1_RXEN 0x04 -#define ECON1_BSEL1 0x02 -#define ECON1_BSEL0 0x01 -// ENC28J60 MACON1 Register Bit Definitions -#define MACON1_LOOPBK 0x10 -#define MACON1_TXPAUS 0x08 -#define MACON1_RXPAUS 0x04 -#define MACON1_PASSALL 0x02 -#define MACON1_MARXEN 0x01 -// ENC28J60 MACON2 Register Bit Definitions -#define MACON2_MARST 0x80 -#define MACON2_RNDRST 0x40 -#define MACON2_MARXRST 0x08 -#define MACON2_RFUNRST 0x04 -#define MACON2_MATXRST 0x02 -#define MACON2_TFUNRST 0x01 -// ENC28J60 MACON3 Register Bit Definitions -#define MACON3_PADCFG2 0x80 -#define MACON3_PADCFG1 0x40 -#define MACON3_PADCFG0 0x20 -#define MACON3_TXCRCEN 0x10 -#define MACON3_PHDRLEN 0x08 -#define MACON3_HFRMLEN 0x04 -#define MACON3_FRMLNEN 0x02 -#define MACON3_FULDPX 0x01 -// ENC28J60 MACON4 Register Bit Definitions -#define MACON4_DEFER (1<<6) -#define MACON4_BPEN (1<<5) -#define MACON4_NOBKOFF (1<<4) -// ENC28J60 MICMD Register Bit Definitions -#define MICMD_MIISCAN 0x02 -#define MICMD_MIIRD 0x01 -// ENC28J60 MISTAT Register Bit Definitions -#define MISTAT_NVALID 0x04 -#define MISTAT_SCAN 0x02 -#define MISTAT_BUSY 0x01 -// ENC28J60 PHY PHCON1 Register Bit Definitions -#define PHCON1_PRST 0x8000 -#define PHCON1_PLOOPBK 0x4000 -#define PHCON1_PPWRSV 0x0800 -#define PHCON1_PDPXMD 0x0100 -// ENC28J60 PHY PHSTAT1 Register Bit Definitions -#define PHSTAT1_PFDPX 0x1000 -#define PHSTAT1_PHDPX 0x0800 -#define PHSTAT1_LLSTAT 0x0004 -#define PHSTAT1_JBSTAT 0x0002 -/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */ -#define PHSTAT2_TXSTAT (1 << 13) -#define PHSTAT2_RXSTAT (1 << 12) -#define PHSTAT2_COLSTAT (1 << 11) -#define PHSTAT2_LSTAT (1 << 10) -#define PHSTAT2_DPXSTAT (1 << 9) -#define PHSTAT2_PLRITY (1 << 5) -// ENC28J60 PHY PHCON2 Register Bit Definitions -#define PHCON2_FRCLINK 0x4000 -#define PHCON2_TXDIS 0x2000 -#define PHCON2_JABBER 0x0400 -#define PHCON2_HDLDIS 0x0100 - -// ENC28J60 Packet Control Byte Bit Definitions -#define PKTCTRL_PHUGEEN 0x08 -#define PKTCTRL_PPADEN 0x04 -#define PKTCTRL_PCRCEN 0x02 -#define PKTCTRL_POVERRIDE 0x01 - -// SPI operation codes -#define ENC28J60_READ_CTRL_REG 0x00 -#define ENC28J60_READ_BUF_MEM 0x3A -#define ENC28J60_WRITE_CTRL_REG 0x40 -#define ENC28J60_WRITE_BUF_MEM 0x7A -#define ENC28J60_BIT_FIELD_SET 0x80 -#define ENC28J60_BIT_FIELD_CLR 0xA0 -#define ENC28J60_SOFT_RESET 0xFF - -// The RXSTART_INIT should be zero. See Rev. B4 Silicon Errata -// buffer boundaries applied to internal 8K ram -// the entire available packet buffer space is allocated -// - -// start with recbuf at 0/ -#define RXSTART_INIT 0x0 -// receive buffer end -#define RXSTOP_INIT (0x1FFF-0x0600) - 1 -// start TX buffer at 0x1FFF-0x0600, pace for one full ethernet frame (~1500 bytes) - -#define TXSTART_INIT (0x1FFF-0x0600) -// stp TX buffer at end of mem -#define TXSTOP_INIT 0x1FFF - -// max frame length which the conroller will accept: -#define MAX_FRAMELEN 1518 - -int rt_hw_enc28j60_init(void); - -#endif diff --git a/bsp/stm32/kbd.c b/bsp/stm32/kbd.c deleted file mode 100644 index ee9aee941..000000000 --- a/bsp/stm32/kbd.c +++ /dev/null @@ -1,91 +0,0 @@ -#include "kbd.h" -#include "stm32f10x_lib.h" - -#define GPIO_Pin_KB1 GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 -#define GPIO_Pin_KB2 GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_9 -#define GPIO_KB1 GPIOA -#define GPIO_KB2 GPIOB - -#define RCC_APB2Periph_GPIO_KB1 RCC_APB2Periph_GPIOA -#define RCC_APB2Periph_GPIO_KB2 RCC_APB2Periph_GPIOB - -#define EXTI_LINE_KB1 EXTI_Line0 | EXTI_Line1 | EXTI_Line2 | EXTI_Line3 -#define GPIO_PORT_SOURCE_KB1 GPIO_PortSourceGPIOA -#define EXTI_LINE_KB2 EXTI_Line0 | EXTI_Line1 | EXTI_Line9 -#define GPIO_PORT_SOURCE_KB2 GPIO_PortSourceGPIOB - -void rt_hw_kbd_init() -{ - GPIO_InitTypeDef GPIO_InitStructure; - NVIC_InitTypeDef NVIC_InitStructure; - EXTI_InitTypeDef EXTI_InitStructure; - - /* Configure Key Button 1 GPIO Pin as input floating (Key Button EXTI Line) */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_KB1; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIO_KB1, &GPIO_InitStructure); - - /* Configure Key Button 2 GPIO Pin as input floating (Key Button EXTI Line) */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_KB2; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIO_KB2, &GPIO_InitStructure); - - /* Enable Key Button GPIO Port clock */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIO_KB1 | RCC_APB2Periph_GPIO_KB2 | - RCC_APB2Periph_AFIO, ENABLE); - - /* Configure one bit for preemption priority */ - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1); - - /* Enable the EXTI9_5 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - NVIC_InitStructure.NVIC_IRQChannel = EXTI1_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - NVIC_InitStructure.NVIC_IRQChannel = EXTI2_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - NVIC_InitStructure.NVIC_IRQChannel = EXTI3_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - NVIC_InitStructure.NVIC_IRQChannel = EXTI9_5_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Connect Key Button EXTI Line to Key Button GPIO Pin */ - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB1, GPIO_PinSource0); - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB1, GPIO_PinSource1); - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB1, GPIO_PinSource2); - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB1, GPIO_PinSource3); - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB2, GPIO_PinSource0); - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB2, GPIO_PinSource1); - GPIO_EXTILineConfig(GPIO_PORT_SOURCE_KB2, GPIO_PinSource9); - - /* Configure Key Button EXTI Line to generate an interrupt on falling edge */ - EXTI_InitStructure.EXTI_Line = EXTI_LINE_KB1 | EXTI_LINE_KB2; - EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStructure.EXTI_LineCmd = ENABLE; - EXTI_Init(&EXTI_InitStructure); -} - -void rt_hw_kbd_scan() -{ - /* KBD1 */ - - /* KBD2 */ -} diff --git a/bsp/stm32/kbd.h b/bsp/stm32/kbd.h deleted file mode 100644 index 6bafa9007..000000000 --- a/bsp/stm32/kbd.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __KBD_H__ -#define __KBD_H__ - -#include -#include - -#endif diff --git a/bsp/stm32/lcd.c b/bsp/stm32/lcd.c deleted file mode 100644 index 849cc2f16..000000000 --- a/bsp/stm32/lcd.c +++ /dev/null @@ -1,487 +0,0 @@ -#include "lcd.h" -#include "finsh.h" -#include "stm32f10x_lib.h" -#include "stm32f10x_rcc.h" - -#ifdef RT_USING_RTGUI - -#include -#include - -/* - * LCD Driver - * RGB mode (5-6-5) - * 240 x 320 pixel LCD - */ -/* convert rtgui color to hardware color, rgb 5-6-5 */ -typedef struct -{ - rt_uint16_t LCD_REG; - rt_uint16_t LCD_RAM; -} LCD_TypeDef; - -/* Note: LCD /CS is CE4 - Bank 4 of NOR/SRAM Bank 1~4 */ -#define LCD_BASE ((rt_uint32_t)(0x60000000 | 0x0C000000)) -#define LCD ((LCD_TypeDef *) LCD_BASE) - -#define HW_COLOR_FROM(c) \ - (((RTGUI_RGB_R(c) >> 3) << 11) | \ - ((RTGUI_RGB_B(c) >> 2) << 5) | \ - ((RTGUI_RGB_B(c) >> 3) & 0x1f)) -#define HW_COLOR_TO(c) \ - ((c & 0x1f) * 255 / 31) | \ - (((c >> 5) & 0x3f) * 255 / 63) | \ - (((c >> 11) & 0x1f) * 255 / 31) - -#ifdef RT_USING_FRAMEBUFFER -rt_uint16_t _rt_hw_framebuffer[320 x 240]; -#endif - -/******************************************************************************* -* Function Name : LCD_WriteReg -* Description : Writes to the selected LCD register. -* Input : - LCD_Reg: address of the selected register. -* - LCD_RegValue: value to write to the selected register. -* Output : None -* Return : None -*******************************************************************************/ -void LCD_WriteReg(rt_uint8_t LCD_Reg, rt_uint16_t LCD_RegValue) -{ - /* Write 16-bit Index, then Write Reg */ - LCD->LCD_REG = LCD_Reg; - /* Write 16-bit Reg */ - LCD->LCD_RAM = LCD_RegValue; -} - -/******************************************************************************* -* Function Name : LCD_ReadReg -* Description : Reads the selected LCD Register. -* Input : None -* Output : None -* Return : LCD Register Value. -*******************************************************************************/ -rt_uint16_t LCD_ReadReg(rt_uint8_t LCD_Reg) -{ - /* Write 16-bit Index (then Read Reg) */ - LCD->LCD_REG = LCD_Reg; - /* Read 16-bit Reg */ - return (LCD->LCD_RAM); -} - -/******************************************************************************* -* Function Name : LCD_WriteRAM_Prepare -* Description : Prepare to write to the LCD RAM. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void LCD_WriteRAM_Prepare(void) -{ - LCD->LCD_REG = R34; -} - -/******************************************************************************* -* Function Name : LCD_WriteRAM -* Description : Writes to the LCD RAM. -* Input : - RGB_Code: the pixel color in RGB mode (5-6-5). -* Output : None -* Return : None -*******************************************************************************/ -rt_inline void LCD_WriteRAM(rt_uint16_t RGB_Code) -{ - /* Write 16-bit GRAM Reg */ - LCD->LCD_RAM = RGB_Code; -} - -/******************************************************************************* -* Function Name : LCD_ReadRAM -* Description : Reads the LCD RAM. -* Input : None -* Output : None -* Return : LCD RAM Value. -*******************************************************************************/ -rt_inline rt_uint16_t LCD_ReadRAM(void) -{ - /* Write 16-bit Index (then Read Reg) */ - LCD->LCD_REG = R34; /* Select GRAM Reg */ - /* Read 16-bit Reg */ - return LCD->LCD_RAM; -} - -/******************************************************************************* -* Function Name : LCD_DisplayOn -* Description : Enables the Display. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void LCD_DisplayOn(void) -{ - /* Display On */ - LCD_WriteReg(0x26, 0x3C); /* 262K color and display ON */ -} - -/******************************************************************************* -* Function Name : LCD_DisplayOff -* Description : Disables the Display. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void LCD_DisplayOff(void) -{ - /* Display Off */ - LCD_WriteReg(0x26, 0x0); -} - -/******************************************************************************* -* Function Name : LCD_SetCursor -* Description : Sets the cursor position. -* Input : - Xpos: specifies the X position. -* - Ypos: specifies the Y position. -* Output : None -* Return : None -*******************************************************************************/ -void LCD_SetCursor(rt_uint32_t x, rt_uint32_t y) -{ - LCD_WriteReg(0x06, (x & 0xff00) >> 8); - LCD_WriteReg(0x07, (x & 0x00ff)); - - LCD_WriteReg(0x02, (y & 0xff00) >> 8); - LCD_WriteReg(0x03, (y & 0x00ff)); -} - -/******************************************************************************* -* Function Name : LCD_CtrlLinesConfig -* Description : Configures LCD Control lines (FSMC Pins) in alternate function - Push-Pull mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void LCD_CtrlLinesConfig(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* Enable FSMC, GPIOD, GPIOE, GPIOF, GPIOG and AFIO clocks */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE); - - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA|RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOE | - RCC_APB2Periph_GPIOF | RCC_APB2Periph_GPIOG | - RCC_APB2Periph_AFIO, ENABLE); - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; - //±łąâ - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_Init(GPIOA, &GPIO_InitStructure); - GPIO_ResetBits(GPIOA, GPIO_Pin_8); - //·äĂůĆ÷ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6; - GPIO_Init(GPIOC, &GPIO_InitStructure); - GPIO_SetBits(GPIOC, GPIO_Pin_6); - - /* Set PD.00(D2), PD.01(D3), PD.04(NOE), PD.05(NWE), PD.08(D13), PD.09(D14), - PD.10(D15), PD.14(D0), PD.15(D1) as alternate - function push pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | GPIO_Pin_5 | - GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_14 | - GPIO_Pin_15; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOD, &GPIO_InitStructure); - - /* Set PE.07(D4), PE.08(D5), PE.09(D6), PE.10(D7), PE.11(D8), PE.12(D9), PE.13(D10), - PE.14(D11), PE.15(D12) as alternate function push pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6 | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | - GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | - GPIO_Pin_15; - GPIO_Init(GPIOE, &GPIO_InitStructure); - - // GPIO_WriteBit(GPIOE, GPIO_Pin_6, Bit_SET); - /* Set PF.00(A0 (RS)) as alternate function push pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0; - GPIO_Init(GPIOF, &GPIO_InitStructure); - - /* Set PG.12(NE4 (LCD/CS)) as alternate function push pull - CE3(LCD /CS) */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12; - GPIO_Init(GPIOG, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : LCD_FSMCConfig -* Description : Configures the Parallel interface (FSMC) for LCD(Parallel mode) -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void LCD_FSMCConfig(void) -{ - FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure; - FSMC_NORSRAMTimingInitTypeDef p; - - /*-- FSMC Configuration ------------------------------------------------------*/ - /*----------------------- SRAM Bank 4 ----------------------------------------*/ - /* FSMC_Bank1_NORSRAM4 configuration */ - p.FSMC_AddressSetupTime = 0; - p.FSMC_AddressHoldTime = 0; - p.FSMC_DataSetupTime = 2; - p.FSMC_BusTurnAroundDuration = 0; - p.FSMC_CLKDivision = 0; - p.FSMC_DataLatency = 0; - p.FSMC_AccessMode = FSMC_AccessMode_A; - - /* Color LCD configuration ------------------------------------ - LCD configured as follow: - - Data/Address MUX = Disable - - Memory Type = SRAM - - Data Width = 16bit - - Write Operation = Enable - - Extended Mode = Enable - - Asynchronous Wait = Disable */ - FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM4; - FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable; - FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM; - FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_16b; - FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable; - FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - // FSMC_NORSRAMInitStructure.FSMC_AsyncWait = FSMC_AsyncWait_Disable; - FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p; - FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p; - - FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure); - - /* BANK 4 (of NOR/SRAM Bank 1~4) is enabled */ - FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE); -} - -void rt_hw_lcd_update(rtgui_rect_t *rect) -{ - /* nothing */ -} - -rt_uint8_t * rt_hw_lcd_get_framebuffer(void) -{ -#ifdef RT_USING_FRAMEBUFFER - return (rt_uint8_t *)_rt_hw_framebuffer; -#else - return RT_NULL; -#endif -} - -void rt_hw_lcd_set_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y) -{ - LCD_SetCursor(x, 319 - y); - - /* Prepare to write GRAM */ - LCD_WriteRAM_Prepare(); - LCD_WriteRAM(HW_COLOR_FROM(*c)); -} - -void rt_hw_lcd_get_pixel(rtgui_color_t *c, rt_base_t x, rt_base_t y) -{ - rt_uint16_t hc; - - LCD_SetCursor(x, 319 - y); - hc = LCD_ReadRAM(); - *c = HW_COLOR_TO(hc); -} - -void rt_hw_lcd_draw_hline(rtgui_color_t *c, rt_base_t x1, rt_base_t x2, rt_base_t y) -{ - rt_uint32_t index; - rt_uint16_t hc; - - hc = HW_COLOR_FROM(*c); - - for (index = x1; index < x2; index ++) - { - LCD_SetCursor(index, 319 - y); - - /* Prepare to write GRAM */ - LCD_WriteRAM_Prepare(); - LCD_WriteRAM(hc); - } -} - -void rt_hw_lcd_draw_vline(rtgui_color_t *c, rt_base_t x, rt_base_t y1, rt_base_t y2) -{ - rt_uint32_t index; - rt_uint16_t hc; - - hc = HW_COLOR_FROM(*c); - - for (index = y1; index < y2; index ++) - { - LCD_SetCursor(x, 319 - index); - - /* Prepare to write GRAM */ - LCD_WriteRAM_Prepare(); - LCD_WriteRAM(hc); - } -} - -struct rtgui_graphic_driver _rtgui_lcd_driver = -{ - "lcd", - 2, - 240, - 320, - rt_hw_lcd_update, - rt_hw_lcd_get_framebuffer, - rt_hw_lcd_set_pixel, - rt_hw_lcd_get_pixel, - rt_hw_lcd_draw_hline, - rt_hw_lcd_draw_vline -}; - -#define Delay(v) \ - { \ - volatile rt_uint32_t index; \ - for (index = 0; index < v * 100; index ++) \ - ; \ - } - -void rt_hw_lcd_init() -{ - /* Configure the LCD Control pins --------------------------------------------*/ - LCD_CtrlLinesConfig(); - - /* Configure the FSMC Parallel interface -------------------------------------*/ - LCD_FSMCConfig(); - - Delay(5); /* delay 50 ms */ - // Gamma for CMO 3.2ˇ± - LCD_WriteReg(0x46,0x94); - LCD_WriteReg(0x47,0x41); - LCD_WriteReg(0x48,0x00); - LCD_WriteReg(0x49,0x33); - LCD_WriteReg(0x4a,0x23); - LCD_WriteReg(0x4b,0x45); - LCD_WriteReg(0x4c,0x44); - LCD_WriteReg(0x4d,0x77); - LCD_WriteReg(0x4e,0x12); - LCD_WriteReg(0x4f,0xcc); - LCD_WriteReg(0x50,0x46); - LCD_WriteReg(0x51,0x82); - - //240x320 window setting - LCD_WriteReg(0x02,0x00); - LCD_WriteReg(0x03,0x00); - LCD_WriteReg(0x04,0x01); - LCD_WriteReg(0x05,0x3f); - LCD_WriteReg(0x06,0x00); - LCD_WriteReg(0x07,0x00); - LCD_WriteReg(0x08,0x00); - LCD_WriteReg(0x09,0xef); - - // Display Setting - LCD_WriteReg(0x01,0x06); - LCD_WriteReg(0x16,0x68); - LCD_WriteReg(0x23,0x95); - LCD_WriteReg(0x24,0x95); - LCD_WriteReg(0x25,0xff); - - LCD_WriteReg(0x27,0x02); - LCD_WriteReg(0x28,0x02); - LCD_WriteReg(0x29,0x02); - LCD_WriteReg(0x2a,0x02); - LCD_WriteReg(0x2c,0x02); - LCD_WriteReg(0x2d,0x02); - - LCD_WriteReg(0x3a,0x01);///******************* - LCD_WriteReg(0x3b,0x01); - LCD_WriteReg(0x3c,0xf0); - LCD_WriteReg(0x3d,0x00); - - Delay(2); - - LCD_WriteReg(0x35,0x38); - LCD_WriteReg(0x36,0x78); - - LCD_WriteReg(0x3e,0x38); - - LCD_WriteReg(0x40,0x0f); - LCD_WriteReg(0x41,0xf0); - - // Power Supply Setting - LCD_WriteReg(0x19,0x49);//******** - LCD_WriteReg(0x93,0x0f);//******* - - Delay(1); - - LCD_WriteReg(0x20,0x30); - LCD_WriteReg(0x1d,0x07); - LCD_WriteReg(0x1e,0x00); - LCD_WriteReg(0x1f,0x07); - - // VCOM Setting for CMO 3.2ˇ± Panel - LCD_WriteReg(0x44,0x4d);//4d***************4f - LCD_WriteReg(0x45,0x13);//0x0a); - Delay(1); - LCD_WriteReg(0x1c,0x04); - Delay(2); - LCD_WriteReg(0x43,0x80); - Delay(5); - LCD_WriteReg(0x1b,0x08); - Delay(4); - LCD_WriteReg(0x1b,0x10); - Delay(4); - - // Display ON Setting - LCD_WriteReg(0x90,0x7f); - LCD_WriteReg(0x26,0x04); - Delay(4); - LCD_WriteReg(0x26,0x24); - LCD_WriteReg(0x26,0x2c); - Delay(4); - LCD_WriteReg(0x26,0x3c); - - // Set internal VDDD voltage - LCD_WriteReg(0x57,0x02); - LCD_WriteReg(0x55,0x00); - LCD_WriteReg(0x57,0x00); - - /* add lcd driver into graphic driver */ - rtgui_list_init(&_rtgui_lcd_driver.list); - rtgui_graphic_driver_add(&_rtgui_lcd_driver); -} - -void hline(rt_uint32_t c, rt_base_t x1, rt_base_t x2, rt_base_t y) -{ - rtgui_color_t color = (rtgui_color_t)c; - rt_hw_lcd_draw_hline(&color, x1, x2, y); -} -FINSH_FUNCTION_EXPORT(hline, Horizontal Line) - -void vline(rt_uint32_t c, rt_base_t x, rt_base_t y1, rt_base_t y2) -{ - rtgui_color_t color = (rtgui_color_t)c; - rt_hw_lcd_draw_vline(&color, x, y1, y2); -} -FINSH_FUNCTION_EXPORT(vline, Vertical Line) -FINSH_FUNCTION_EXPORT(rt_hw_lcd_init, LCD Init) - -void clear() -{ - rt_uint32_t index; -#if 0 - for (index = 0; index < 320; index ++) - { - rt_hw_lcd_draw_hline((rtgui_color_t*)&white, 0, 240, index); - } -#else - for (index = 0; index < 240; index ++) - { - rt_hw_lcd_draw_vline((rtgui_color_t*)&white, index, 0, 320); - } -#endif -} -FINSH_FUNCTION_EXPORT(clear, clear screen) - -#endif diff --git a/bsp/stm32/lcd.h b/bsp/stm32/lcd.h deleted file mode 100644 index 72cc1211a..000000000 --- a/bsp/stm32/lcd.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef __LCD_H__ -#define __LCD_H__ - -#include -#include - -/* LCD Registers */ -#define R0 0x00 -#define R1 0x01 -#define R2 0x02 -#define R3 0x03 -#define R4 0x04 -#define R5 0x05 -#define R6 0x06 -#define R7 0x07 -#define R8 0x08 -#define R9 0x09 -#define R10 0x0A -#define R12 0x0C -#define R13 0x0D -#define R14 0x0E -#define R15 0x0F -#define R16 0x10 -#define R17 0x11 -#define R18 0x12 -#define R19 0x13 -#define R20 0x14 -#define R21 0x15 -#define R22 0x16 -#define R23 0x17 -#define R24 0x18 -#define R25 0x19 -#define R26 0x1A -#define R27 0x1B -#define R28 0x1C -#define R29 0x1D -#define R30 0x1E -#define R31 0x1F -#define R32 0x20 -#define R33 0x21 -#define R34 0x22 -#define R36 0x24 -#define R37 0x25 -#define R40 0x28 -#define R41 0x29 -#define R43 0x2B -#define R45 0x2D -#define R48 0x30 -#define R49 0x31 -#define R50 0x32 -#define R51 0x33 -#define R52 0x34 -#define R53 0x35 -#define R54 0x36 -#define R55 0x37 -#define R56 0x38 -#define R57 0x39 -#define R59 0x3B -#define R60 0x3C -#define R61 0x3D -#define R62 0x3E -#define R63 0x3F -#define R64 0x40 -#define R65 0x41 -#define R66 0x42 -#define R67 0x43 -#define R68 0x44 -#define R69 0x45 -#define R70 0x46 -#define R71 0x47 -#define R72 0x48 -#define R73 0x49 -#define R74 0x4A -#define R75 0x4B -#define R76 0x4C -#define R77 0x4D -#define R78 0x4E -#define R79 0x4F -#define R80 0x50 -#define R81 0x51 -#define R82 0x52 -#define R83 0x53 -#define R96 0x60 -#define R97 0x61 -#define R106 0x6A -#define R118 0x76 -#define R128 0x80 -#define R129 0x81 -#define R130 0x82 -#define R131 0x83 -#define R132 0x84 -#define R133 0x85 -#define R134 0x86 -#define R135 0x87 -#define R136 0x88 -#define R137 0x89 -#define R139 0x8B -#define R140 0x8C -#define R141 0x8D -#define R143 0x8F -#define R144 0x90 -#define R145 0x91 -#define R146 0x92 -#define R147 0x93 -#define R148 0x94 -#define R149 0x95 -#define R150 0x96 -#define R151 0x97 -#define R152 0x98 -#define R153 0x99 -#define R154 0x9A -#define R157 0x9D -#define R192 0xC0 -#define R193 0xC1 -#define R229 0xE5 - -/* LCD Control pins */ -#define CtrlPin_NCS GPIO_Pin_2 /* PB.02 */ -#define CtrlPin_RS GPIO_Pin_7 /* PD.07 */ -#define CtrlPin_NWR GPIO_Pin_15 /* PD.15 */ - -/* LCD color */ -#define White 0xFFFF -#define Black 0x0000 -#define Grey 0xF7DE -#define Blue 0x001F -#define Blue2 0x051F -#define Red 0xF800 -#define Magenta 0xF81F -#define Green 0x07E0 -#define Cyan 0x7FFF -#define Yellow 0xFFE0 - -#define Line0 0 -#define Line1 24 -#define Line2 48 -#define Line3 72 -#define Line4 96 -#define Line5 120 -#define Line6 144 -#define Line7 168 -#define Line8 192 -#define Line9 216 - -#define Horizontal 0x00 -#define Vertical 0x01 - -#endif diff --git a/bsp/stm32/library/inc/cortexm3_macro.h b/bsp/stm32/library/inc/cortexm3_macro.h deleted file mode 100644 index b26807f92..000000000 --- a/bsp/stm32/library/inc/cortexm3_macro.h +++ /dev/null @@ -1,53 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : cortexm3_macro.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : Header file for cortexm3_macro.s. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __CORTEXM3_MACRO_H -#define __CORTEXM3_MACRO_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void __WFI(void); -void __WFE(void); -void __SEV(void); -void __ISB(void); -void __DSB(void); -void __DMB(void); -void __SVC(void); -u32 __MRS_CONTROL(void); -void __MSR_CONTROL(u32 Control); -u32 __MRS_PSP(void); -void __MSR_PSP(u32 TopOfProcessStack); -u32 __MRS_MSP(void); -void __MSR_MSP(u32 TopOfMainStack); -void __RESETPRIMASK(void); -void __SETPRIMASK(void); -u32 __READ_PRIMASK(void); -void __RESETFAULTMASK(void); -void __SETFAULTMASK(void); -u32 __READ_FAULTMASK(void); -void __BASEPRICONFIG(u32 NewPriority); -u32 __GetBASEPRI(void); -u16 __REV_HalfWord(u16 Data); -u32 __REV_Word(u32 Data); - -#endif /* __CORTEXM3_MACRO_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_adc.h b/bsp/stm32/library/inc/stm32f10x_adc.h deleted file mode 100644 index b68716023..000000000 --- a/bsp/stm32/library/inc/stm32f10x_adc.h +++ /dev/null @@ -1,300 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_adc.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* ADC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_ADC_H -#define __STM32F10x_ADC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* ADC Init structure definition */ -typedef struct -{ - u32 ADC_Mode; - FunctionalState ADC_ScanConvMode; - FunctionalState ADC_ContinuousConvMode; - u32 ADC_ExternalTrigConv; - u32 ADC_DataAlign; - u8 ADC_NbrOfChannel; -}ADC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_ADC_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == ADC1_BASE) || \ - ((*(u32*)&(PERIPH)) == ADC2_BASE) || \ - ((*(u32*)&(PERIPH)) == ADC3_BASE)) - -#define IS_ADC_DMA_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == ADC1_BASE) || \ - ((*(u32*)&(PERIPH)) == ADC3_BASE)) - -/* ADC dual mode -------------------------------------------------------------*/ -#define ADC_Mode_Independent ((u32)0x00000000) -#define ADC_Mode_RegInjecSimult ((u32)0x00010000) -#define ADC_Mode_RegSimult_AlterTrig ((u32)0x00020000) -#define ADC_Mode_InjecSimult_FastInterl ((u32)0x00030000) -#define ADC_Mode_InjecSimult_SlowInterl ((u32)0x00040000) -#define ADC_Mode_InjecSimult ((u32)0x00050000) -#define ADC_Mode_RegSimult ((u32)0x00060000) -#define ADC_Mode_FastInterl ((u32)0x00070000) -#define ADC_Mode_SlowInterl ((u32)0x00080000) -#define ADC_Mode_AlterTrig ((u32)0x00090000) - -#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ - ((MODE) == ADC_Mode_RegInjecSimult) || \ - ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ - ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ - ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ - ((MODE) == ADC_Mode_InjecSimult) || \ - ((MODE) == ADC_Mode_RegSimult) || \ - ((MODE) == ADC_Mode_FastInterl) || \ - ((MODE) == ADC_Mode_SlowInterl) || \ - ((MODE) == ADC_Mode_AlterTrig)) - -/* ADC extrenal trigger sources for regular channels conversion --------------*/ -/* for ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_T1_CC1 ((u32)0x00000000) -#define ADC_ExternalTrigConv_T1_CC2 ((u32)0x00020000) -#define ADC_ExternalTrigConv_T2_CC2 ((u32)0x00060000) -#define ADC_ExternalTrigConv_T3_TRGO ((u32)0x00080000) -#define ADC_ExternalTrigConv_T4_CC4 ((u32)0x000A0000) -#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((u32)0x000C0000) -/* for ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigConv_T1_CC3 ((u32)0x00040000) -#define ADC_ExternalTrigConv_None ((u32)0x000E0000) -/* for ADC3 */ -#define ADC_ExternalTrigConv_T3_CC1 ((u32)0x00000000) -#define ADC_ExternalTrigConv_T2_CC3 ((u32)0x00020000) -#define ADC_ExternalTrigConv_T8_CC1 ((u32)0x00060000) -#define ADC_ExternalTrigConv_T8_TRGO ((u32)0x00080000) -#define ADC_ExternalTrigConv_T5_CC1 ((u32)0x000A0000) -#define ADC_ExternalTrigConv_T5_CC3 ((u32)0x000C0000) - -#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ - ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_None) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) - -/* ADC data align ------------------------------------------------------------*/ -#define ADC_DataAlign_Right ((u32)0x00000000) -#define ADC_DataAlign_Left ((u32)0x00000800) - -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ - ((ALIGN) == ADC_DataAlign_Left)) - -/* ADC channels --------------------------------------------------------------*/ -#define ADC_Channel_0 ((u8)0x00) -#define ADC_Channel_1 ((u8)0x01) -#define ADC_Channel_2 ((u8)0x02) -#define ADC_Channel_3 ((u8)0x03) -#define ADC_Channel_4 ((u8)0x04) -#define ADC_Channel_5 ((u8)0x05) -#define ADC_Channel_6 ((u8)0x06) -#define ADC_Channel_7 ((u8)0x07) -#define ADC_Channel_8 ((u8)0x08) -#define ADC_Channel_9 ((u8)0x09) -#define ADC_Channel_10 ((u8)0x0A) -#define ADC_Channel_11 ((u8)0x0B) -#define ADC_Channel_12 ((u8)0x0C) -#define ADC_Channel_13 ((u8)0x0D) -#define ADC_Channel_14 ((u8)0x0E) -#define ADC_Channel_15 ((u8)0x0F) -#define ADC_Channel_16 ((u8)0x10) -#define ADC_Channel_17 ((u8)0x11) - -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ - ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ - ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ - ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ - ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ - ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ - ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ - ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ - ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) - -/* ADC sampling times --------------------------------------------------------*/ -#define ADC_SampleTime_1Cycles5 ((u8)0x00) -#define ADC_SampleTime_7Cycles5 ((u8)0x01) -#define ADC_SampleTime_13Cycles5 ((u8)0x02) -#define ADC_SampleTime_28Cycles5 ((u8)0x03) -#define ADC_SampleTime_41Cycles5 ((u8)0x04) -#define ADC_SampleTime_55Cycles5 ((u8)0x05) -#define ADC_SampleTime_71Cycles5 ((u8)0x06) -#define ADC_SampleTime_239Cycles5 ((u8)0x07) - -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ - ((TIME) == ADC_SampleTime_7Cycles5) || \ - ((TIME) == ADC_SampleTime_13Cycles5) || \ - ((TIME) == ADC_SampleTime_28Cycles5) || \ - ((TIME) == ADC_SampleTime_41Cycles5) || \ - ((TIME) == ADC_SampleTime_55Cycles5) || \ - ((TIME) == ADC_SampleTime_71Cycles5) || \ - ((TIME) == ADC_SampleTime_239Cycles5)) - -/* ADC extrenal trigger sources for injected channels conversion -------------*/ -/* For ADC1 and ADC2 */ -#define ADC_ExternalTrigInjecConv_T2_TRGO ((u32)0x00002000) -#define ADC_ExternalTrigInjecConv_T2_CC1 ((u32)0x00003000) -#define ADC_ExternalTrigInjecConv_T3_CC4 ((u32)0x00004000) -#define ADC_ExternalTrigInjecConv_T4_TRGO ((u32)0x00005000) -#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((u32)0x00006000) -/* For ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigInjecConv_T1_TRGO ((u32)0x00000000) -#define ADC_ExternalTrigInjecConv_T1_CC4 ((u32)0x00001000) -#define ADC_ExternalTrigInjecConv_None ((u32)0x00007000) -/* For ADC3 */ -#define ADC_ExternalTrigInjecConv_T4_CC3 ((u32)0x00002000) -#define ADC_ExternalTrigInjecConv_T8_CC2 ((u32)0x00003000) -#define ADC_ExternalTrigInjecConv_T8_CC4 ((u32)0x00004000) -#define ADC_ExternalTrigInjecConv_T5_TRGO ((u32)0x00005000) -#define ADC_ExternalTrigInjecConv_T5_CC4 ((u32)0x00006000) - -#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) - -/* ADC injected channel selection --------------------------------------------*/ -#define ADC_InjectedChannel_1 ((u8)0x14) -#define ADC_InjectedChannel_2 ((u8)0x18) -#define ADC_InjectedChannel_3 ((u8)0x1C) -#define ADC_InjectedChannel_4 ((u8)0x20) - -#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ - ((CHANNEL) == ADC_InjectedChannel_2) || \ - ((CHANNEL) == ADC_InjectedChannel_3) || \ - ((CHANNEL) == ADC_InjectedChannel_4)) - -/* ADC analog watchdog selection ---------------------------------------------*/ -#define ADC_AnalogWatchdog_SingleRegEnable ((u32)0x00800200) -#define ADC_AnalogWatchdog_SingleInjecEnable ((u32)0x00400200) -#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((u32)0x00C00200) -#define ADC_AnalogWatchdog_AllRegEnable ((u32)0x00800000) -#define ADC_AnalogWatchdog_AllInjecEnable ((u32)0x00400000) -#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((u32)0x00C00000) -#define ADC_AnalogWatchdog_None ((u32)0x00000000) - -#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_None)) - -/* ADC interrupts definition -------------------------------------------------*/ -#define ADC_IT_EOC ((u16)0x0220) -#define ADC_IT_AWD ((u16)0x0140) -#define ADC_IT_JEOC ((u16)0x0480) - -#define IS_ADC_IT(IT) ((((IT) & (u16)0xF81F) == 0x00) && ((IT) != 0x00)) -#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ - ((IT) == ADC_IT_JEOC)) - -/* ADC flags definition ------------------------------------------------------*/ -#define ADC_FLAG_AWD ((u8)0x01) -#define ADC_FLAG_EOC ((u8)0x02) -#define ADC_FLAG_JEOC ((u8)0x04) -#define ADC_FLAG_JSTRT ((u8)0x08) -#define ADC_FLAG_STRT ((u8)0x10) - -#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (u8)0xE0) == 0x00) && ((FLAG) != 0x00)) -#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ - ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ - ((FLAG) == ADC_FLAG_STRT)) - -/* ADC thresholds ------------------------------------------------------------*/ -#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) - -/* ADC injected offset -------------------------------------------------------*/ -#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) - -/* ADC injected length -------------------------------------------------------*/ -#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) - -/* ADC injected rank ---------------------------------------------------------*/ -#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) - -/* ADC regular length --------------------------------------------------------*/ -#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) - -/* ADC regular rank ----------------------------------------------------------*/ -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) - -/* ADC regular discontinuous mode number -------------------------------------*/ -#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void ADC_DeInit(ADC_TypeDef* ADCx); -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState); -void ADC_ResetCalibration(ADC_TypeDef* ADCx); -FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); -void ADC_StartCalibration(ADC_TypeDef* ADCx); -FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); -void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, u8 Number); -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime); -void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -u16 ADC_GetConversionValue(ADC_TypeDef* ADCx); -u32 ADC_GetDualModeConversionValue(void); -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv); -void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime); -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, u8 Length); -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel, u16 Offset); -u16 ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel); -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, u32 ADC_AnalogWatchdog); -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, u16 HighThreshold, u16 LowThreshold); -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel); -void ADC_TempSensorVrefintCmd(FunctionalState NewState); -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, u8 ADC_FLAG); -void ADC_ClearFlag(ADC_TypeDef* ADCx, u8 ADC_FLAG); -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, u16 ADC_IT); -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, u16 ADC_IT); - -#endif /*__STM32F10x_ADC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_bkp.h b/bsp/stm32/library/inc/stm32f10x_bkp.h deleted file mode 100644 index 5fe02009a..000000000 --- a/bsp/stm32/library/inc/stm32f10x_bkp.h +++ /dev/null @@ -1,122 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_bkp.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* BKP firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_BKP_H -#define __STM32F10x_BKP_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Tamper Pin active level */ -#define BKP_TamperPinLevel_High ((u16)0x0000) -#define BKP_TamperPinLevel_Low ((u16)0x0001) - -#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \ - ((LEVEL) == BKP_TamperPinLevel_Low)) - -/* RTC output source to output on the Tamper pin */ -#define BKP_RTCOutputSource_None ((u16)0x0000) -#define BKP_RTCOutputSource_CalibClock ((u16)0x0080) -#define BKP_RTCOutputSource_Alarm ((u16)0x0100) -#define BKP_RTCOutputSource_Second ((u16)0x0300) - -#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \ - ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \ - ((SOURCE) == BKP_RTCOutputSource_Alarm) || \ - ((SOURCE) == BKP_RTCOutputSource_Second)) - -/* Data Backup Register */ -#define BKP_DR1 ((u16)0x0004) -#define BKP_DR2 ((u16)0x0008) -#define BKP_DR3 ((u16)0x000C) -#define BKP_DR4 ((u16)0x0010) -#define BKP_DR5 ((u16)0x0014) -#define BKP_DR6 ((u16)0x0018) -#define BKP_DR7 ((u16)0x001C) -#define BKP_DR8 ((u16)0x0020) -#define BKP_DR9 ((u16)0x0024) -#define BKP_DR10 ((u16)0x0028) -#define BKP_DR11 ((u16)0x0040) -#define BKP_DR12 ((u16)0x0044) -#define BKP_DR13 ((u16)0x0048) -#define BKP_DR14 ((u16)0x004C) -#define BKP_DR15 ((u16)0x0050) -#define BKP_DR16 ((u16)0x0054) -#define BKP_DR17 ((u16)0x0058) -#define BKP_DR18 ((u16)0x005C) -#define BKP_DR19 ((u16)0x0060) -#define BKP_DR20 ((u16)0x0064) -#define BKP_DR21 ((u16)0x0068) -#define BKP_DR22 ((u16)0x006C) -#define BKP_DR23 ((u16)0x0070) -#define BKP_DR24 ((u16)0x0074) -#define BKP_DR25 ((u16)0x0078) -#define BKP_DR26 ((u16)0x007C) -#define BKP_DR27 ((u16)0x0080) -#define BKP_DR28 ((u16)0x0084) -#define BKP_DR29 ((u16)0x0088) -#define BKP_DR30 ((u16)0x008C) -#define BKP_DR31 ((u16)0x0090) -#define BKP_DR32 ((u16)0x0094) -#define BKP_DR33 ((u16)0x0098) -#define BKP_DR34 ((u16)0x009C) -#define BKP_DR35 ((u16)0x00A0) -#define BKP_DR36 ((u16)0x00A4) -#define BKP_DR37 ((u16)0x00A8) -#define BKP_DR38 ((u16)0x00AC) -#define BKP_DR39 ((u16)0x00B0) -#define BKP_DR40 ((u16)0x00B4) -#define BKP_DR41 ((u16)0x00B8) -#define BKP_DR42 ((u16)0x00BC) - -#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \ - ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \ - ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \ - ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \ - ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \ - ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \ - ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \ - ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \ - ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \ - ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \ - ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \ - ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \ - ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \ - ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42)) - -#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void BKP_DeInit(void); -void BKP_TamperPinLevelConfig(u16 BKP_TamperPinLevel); -void BKP_TamperPinCmd(FunctionalState NewState); -void BKP_ITConfig(FunctionalState NewState); -void BKP_RTCOutputConfig(u16 BKP_RTCOutputSource); -void BKP_SetRTCCalibrationValue(u8 CalibrationValue); -void BKP_WriteBackupRegister(u16 BKP_DR, u16 Data); -u16 BKP_ReadBackupRegister(u16 BKP_DR); -FlagStatus BKP_GetFlagStatus(void); -void BKP_ClearFlag(void); -ITStatus BKP_GetITStatus(void); -void BKP_ClearITPendingBit(void); - -#endif /* __STM32F10x_BKP_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_can.h b/bsp/stm32/library/inc/stm32f10x_can.h deleted file mode 100644 index bb99109ae..000000000 --- a/bsp/stm32/library/inc/stm32f10x_can.h +++ /dev/null @@ -1,263 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_can.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* CAN firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CAN_H -#define __STM32F10x_CAN_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* CAN init structure definition */ -typedef struct -{ - FunctionalState CAN_TTCM; - FunctionalState CAN_ABOM; - FunctionalState CAN_AWUM; - FunctionalState CAN_NART; - FunctionalState CAN_RFLM; - FunctionalState CAN_TXFP; - u8 CAN_Mode; - u8 CAN_SJW; - u8 CAN_BS1; - u8 CAN_BS2; - u16 CAN_Prescaler; -} CAN_InitTypeDef; - -/* CAN filter init structure definition */ -typedef struct -{ - u8 CAN_FilterNumber; - u8 CAN_FilterMode; - u8 CAN_FilterScale; - u16 CAN_FilterIdHigh; - u16 CAN_FilterIdLow; - u16 CAN_FilterMaskIdHigh; - u16 CAN_FilterMaskIdLow; - u16 CAN_FilterFIFOAssignment; - FunctionalState CAN_FilterActivation; -} CAN_FilterInitTypeDef; - -/* CAN Tx message structure definition */ -typedef struct -{ - u32 StdId; - u32 ExtId; - u8 IDE; - u8 RTR; - u8 DLC; - u8 Data[8]; -} CanTxMsg; - -/* CAN Rx message structure definition */ -typedef struct -{ - u32 StdId; - u32 ExtId; - u8 IDE; - u8 RTR; - u8 DLC; - u8 Data[8]; - u8 FMI; -} CanRxMsg; - -/* Exported constants --------------------------------------------------------*/ - -/* CAN sleep constants */ -#define CANINITFAILED ((u8)0x00) /* CAN initialization failed */ -#define CANINITOK ((u8)0x01) /* CAN initialization failed */ - -/* CAN operating mode */ -#define CAN_Mode_Normal ((u8)0x00) /* normal mode */ -#define CAN_Mode_LoopBack ((u8)0x01) /* loopback mode */ -#define CAN_Mode_Silent ((u8)0x02) /* silent mode */ -#define CAN_Mode_Silent_LoopBack ((u8)0x03) /* loopback combined with silent mode */ - -#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || ((MODE) == CAN_Mode_LoopBack)|| \ - ((MODE) == CAN_Mode_Silent) || ((MODE) == CAN_Mode_Silent_LoopBack)) - -/* CAN synchronisation jump width */ -#define CAN_SJW_1tq ((u8)0x00) /* 1 time quantum */ -#define CAN_SJW_2tq ((u8)0x01) /* 2 time quantum */ -#define CAN_SJW_3tq ((u8)0x02) /* 3 time quantum */ -#define CAN_SJW_4tq ((u8)0x03) /* 4 time quantum */ - -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ - ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) - -/* time quantum in bit segment 1 */ -#define CAN_BS1_1tq ((u8)0x00) /* 1 time quantum */ -#define CAN_BS1_2tq ((u8)0x01) /* 2 time quantum */ -#define CAN_BS1_3tq ((u8)0x02) /* 3 time quantum */ -#define CAN_BS1_4tq ((u8)0x03) /* 4 time quantum */ -#define CAN_BS1_5tq ((u8)0x04) /* 5 time quantum */ -#define CAN_BS1_6tq ((u8)0x05) /* 6 time quantum */ -#define CAN_BS1_7tq ((u8)0x06) /* 7 time quantum */ -#define CAN_BS1_8tq ((u8)0x07) /* 8 time quantum */ -#define CAN_BS1_9tq ((u8)0x08) /* 9 time quantum */ -#define CAN_BS1_10tq ((u8)0x09) /* 10 time quantum */ -#define CAN_BS1_11tq ((u8)0x0A) /* 11 time quantum */ -#define CAN_BS1_12tq ((u8)0x0B) /* 12 time quantum */ -#define CAN_BS1_13tq ((u8)0x0C) /* 13 time quantum */ -#define CAN_BS1_14tq ((u8)0x0D) /* 14 time quantum */ -#define CAN_BS1_15tq ((u8)0x0E) /* 15 time quantum */ -#define CAN_BS1_16tq ((u8)0x0F) /* 16 time quantum */ - -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) - -/* time quantum in bit segment 2 */ -#define CAN_BS2_1tq ((u8)0x00) /* 1 time quantum */ -#define CAN_BS2_2tq ((u8)0x01) /* 2 time quantum */ -#define CAN_BS2_3tq ((u8)0x02) /* 3 time quantum */ -#define CAN_BS2_4tq ((u8)0x03) /* 4 time quantum */ -#define CAN_BS2_5tq ((u8)0x04) /* 5 time quantum */ -#define CAN_BS2_6tq ((u8)0x05) /* 6 time quantum */ -#define CAN_BS2_7tq ((u8)0x06) /* 7 time quantum */ -#define CAN_BS2_8tq ((u8)0x07) /* 8 time quantum */ - -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) - -/* CAN clock prescaler */ -#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) - -/* CAN filter number */ -#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) - -/* CAN filter mode */ -#define CAN_FilterMode_IdMask ((u8)0x00) /* id/mask mode */ -#define CAN_FilterMode_IdList ((u8)0x01) /* identifier list mode */ - -#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ - ((MODE) == CAN_FilterMode_IdList)) - -/* CAN filter scale */ -#define CAN_FilterScale_16bit ((u8)0x00) /* 16-bit filter scale */ -#define CAN_FilterScale_32bit ((u8)0x01) /* 2-bit filter scale */ - -#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ - ((SCALE) == CAN_FilterScale_32bit)) - -/* CAN filter FIFO assignation */ -#define CAN_FilterFIFO0 ((u8)0x00) /* Filter FIFO 0 assignment for filter x */ -#define CAN_FilterFIFO1 ((u8)0x01) /* Filter FIFO 1 assignment for filter x */ - -#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ - ((FIFO) == CAN_FilterFIFO1)) - -/* CAN Tx */ -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((u8)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((u32)0x7FF)) -#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((u32)0x1FFFFFFF)) -#define IS_CAN_DLC(DLC) ((DLC) <= ((u8)0x08)) - -/* CAN identifier type */ -#define CAN_ID_STD ((u32)0x00000000) /* Standard Id */ -#define CAN_ID_EXT ((u32)0x00000004) /* Extended Id */ - -#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || ((IDTYPE) == CAN_ID_EXT)) - -/* CAN remote transmission request */ -#define CAN_RTR_DATA ((u32)0x00000000) /* Data frame */ -#define CAN_RTR_REMOTE ((u32)0x00000002) /* Remote frame */ - -#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE)) - -/* CAN transmit constants */ -#define CANTXFAILED ((u8)0x00) /* CAN transmission failed */ -#define CANTXOK ((u8)0x01) /* CAN transmission succeeded */ -#define CANTXPENDING ((u8)0x02) /* CAN transmission pending */ -#define CAN_NO_MB ((u8)0x04) /* CAN cell did not provide an empty mailbox */ - -/* CAN receive FIFO number constants */ -#define CAN_FIFO0 ((u8)0x00) /* CAN FIFO0 used to receive */ -#define CAN_FIFO1 ((u8)0x01) /* CAN FIFO1 used to receive */ - -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) - -/* CAN sleep constants */ -#define CANSLEEPFAILED ((u8)0x00) /* CAN did not enter the sleep mode */ -#define CANSLEEPOK ((u8)0x01) /* CAN entered the sleep mode */ - -/* CAN wake up constants */ -#define CANWAKEUPFAILED ((u8)0x00) /* CAN did not leave the sleep mode */ -#define CANWAKEUPOK ((u8)0x01) /* CAN leaved the sleep mode */ - -/* CAN flags */ -#define CAN_FLAG_EWG ((u32)0x00000001) /* Error Warning Flag */ -#define CAN_FLAG_EPV ((u32)0x00000002) /* Error Passive Flag */ -#define CAN_FLAG_BOF ((u32)0x00000004) /* Bus-Off Flag */ - -#define IS_CAN_FLAG(FLAG) (((FLAG) == CAN_FLAG_EWG) || ((FLAG) == CAN_FLAG_EPV) ||\ - ((FLAG) == CAN_FLAG_BOF)) - -/* CAN interrupts */ -#define CAN_IT_RQCP0 ((u32)0x00000005) /* Request completed mailbox 0 */ -#define CAN_IT_RQCP1 ((u32)0x00000006) /* Request completed mailbox 1 */ -#define CAN_IT_RQCP2 ((u32)0x00000007) /* Request completed mailbox 2 */ -#define CAN_IT_TME ((u32)0x00000001) /* Transmit mailbox empty */ -#define CAN_IT_FMP0 ((u32)0x00000002) /* FIFO 0 message pending */ -#define CAN_IT_FF0 ((u32)0x00000004) /* FIFO 0 full */ -#define CAN_IT_FOV0 ((u32)0x00000008) /* FIFO 0 overrun */ -#define CAN_IT_FMP1 ((u32)0x00000010) /* FIFO 1 message pending */ -#define CAN_IT_FF1 ((u32)0x00000020) /* FIFO 1 full */ -#define CAN_IT_FOV1 ((u32)0x00000040) /* FIFO 1 overrun */ -#define CAN_IT_EWG ((u32)0x00000100) /* Error warning */ -#define CAN_IT_EPV ((u32)0x00000200) /* Error passive */ -#define CAN_IT_BOF ((u32)0x00000400) /* Bus-off */ -#define CAN_IT_LEC ((u32)0x00000800) /* Last error code */ -#define CAN_IT_ERR ((u32)0x00008000) /* Error */ -#define CAN_IT_WKU ((u32)0x00010000) /* Wake-up */ -#define CAN_IT_SLK ((u32)0x00020000) /* Sleep */ - -#define IS_CAN_ITConfig(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ - ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ - ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -#define IS_CAN_ITStatus(IT) (((IT) == CAN_IT_RQCP0) || ((IT) == CAN_IT_RQCP1) ||\ - ((IT) == CAN_IT_RQCP2) || ((IT) == CAN_IT_FF0) ||\ - ((IT) == CAN_IT_FOV0) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported function protypes ----------------------------------------------- */ -void CAN_DeInit(void); -u8 CAN_Init(CAN_InitTypeDef* CAN_InitStruct); -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); -void CAN_ITConfig(u32 CAN_IT, FunctionalState NewState); -u8 CAN_Transmit(CanTxMsg* TxMessage); -u8 CAN_TransmitStatus(u8 TransmitMailbox); -void CAN_CancelTransmit(u8 Mailbox); -void CAN_FIFORelease(u8 FIFONumber); -u8 CAN_MessagePending(u8 FIFONumber); -void CAN_Receive(u8 FIFONumber, CanRxMsg* RxMessage); -u8 CAN_Sleep(void); -u8 CAN_WakeUp(void); -FlagStatus CAN_GetFlagStatus(u32 CAN_FLAG); -void CAN_ClearFlag(u32 CAN_FLAG); -ITStatus CAN_GetITStatus(u32 CAN_IT); -void CAN_ClearITPendingBit(u32 CAN_IT); - -#endif /* __STM32F10x_CAN_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_crc.h b/bsp/stm32/library/inc/stm32f10x_crc.h deleted file mode 100644 index 14f6ec54c..000000000 --- a/bsp/stm32/library/inc/stm32f10x_crc.h +++ /dev/null @@ -1,37 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_crc.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* CRC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CRC_H -#define __STM32F10x_CRC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void CRC_ResetDR(void); -u32 CRC_CalcCRC(u32 Data); -u32 CRC_CalcBlockCRC(u32 pBuffer[], u32 BufferLength); -u32 CRC_GetCRC(void); -void CRC_SetIDRegister(u8 IDValue); -u8 CRC_GetIDRegister(void); - -#endif /* __STM32F10x_CRC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_dac.h b/bsp/stm32/library/inc/stm32f10x_dac.h deleted file mode 100644 index 8f0f844a3..000000000 --- a/bsp/stm32/library/inc/stm32f10x_dac.h +++ /dev/null @@ -1,167 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dac.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* DAC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DAC_H -#define __STM32F10x_DAC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* DAC Init structure definition */ -typedef struct -{ - u32 DAC_Trigger; - u32 DAC_WaveGeneration; - u32 DAC_LFSRUnmask_TriangleAmplitude; - u32 DAC_OutputBuffer; -}DAC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* DAC trigger selection */ -#define DAC_Trigger_None ((u32)0x00000000) -#define DAC_Trigger_T6_TRGO ((u32)0x00000004) -#define DAC_Trigger_T8_TRGO ((u32)0x0000000C) -#define DAC_Trigger_T7_TRGO ((u32)0x00000014) -#define DAC_Trigger_T5_TRGO ((u32)0x0000001C) -#define DAC_Trigger_T2_TRGO ((u32)0x00000024) -#define DAC_Trigger_T4_TRGO ((u32)0x0000002C) -#define DAC_Trigger_Ext_IT9 ((u32)0x00000034) -#define DAC_Trigger_Software ((u32)0x0000003C) - -#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ - ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ - ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ - ((TRIGGER) == DAC_Trigger_Software)) - -/* DAC wave generation */ -#define DAC_WaveGeneration_None ((u32)0x00000000) -#define DAC_WaveGeneration_Noise ((u32)0x00000040) -#define DAC_WaveGeneration_Triangle ((u32)0x00000080) - -#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ - ((WAVE) == DAC_WaveGeneration_Noise) || \ - ((WAVE) == DAC_WaveGeneration_Triangle)) - -/* DAC noise wave generation mask / triangle wave generation max amplitude */ -#define DAC_LFSRUnmask_Bit0 ((u32)0x00000000) -#define DAC_LFSRUnmask_Bits1_0 ((u32)0x00000100) -#define DAC_LFSRUnmask_Bits2_0 ((u32)0x00000200) -#define DAC_LFSRUnmask_Bits3_0 ((u32)0x00000300) -#define DAC_LFSRUnmask_Bits4_0 ((u32)0x00000400) -#define DAC_LFSRUnmask_Bits5_0 ((u32)0x00000500) -#define DAC_LFSRUnmask_Bits6_0 ((u32)0x00000600) -#define DAC_LFSRUnmask_Bits7_0 ((u32)0x00000700) -#define DAC_LFSRUnmask_Bits8_0 ((u32)0x00000800) -#define DAC_LFSRUnmask_Bits9_0 ((u32)0x00000900) -#define DAC_LFSRUnmask_Bits10_0 ((u32)0x00000A00) -#define DAC_LFSRUnmask_Bits11_0 ((u32)0x00000B00) - -#define DAC_TriangleAmplitude_1 ((u32)0x00000000) -#define DAC_TriangleAmplitude_3 ((u32)0x00000100) -#define DAC_TriangleAmplitude_7 ((u32)0x00000200) -#define DAC_TriangleAmplitude_15 ((u32)0x00000300) -#define DAC_TriangleAmplitude_31 ((u32)0x00000400) -#define DAC_TriangleAmplitude_63 ((u32)0x00000500) -#define DAC_TriangleAmplitude_127 ((u32)0x00000600) -#define DAC_TriangleAmplitude_255 ((u32)0x00000700) -#define DAC_TriangleAmplitude_511 ((u32)0x00000800) -#define DAC_TriangleAmplitude_1023 ((u32)0x00000900) -#define DAC_TriangleAmplitude_2047 ((u32)0x00000A00) -#define DAC_TriangleAmplitude_4095 ((u32)0x00000B00) - -#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ - ((VALUE) == DAC_TriangleAmplitude_1) || \ - ((VALUE) == DAC_TriangleAmplitude_3) || \ - ((VALUE) == DAC_TriangleAmplitude_7) || \ - ((VALUE) == DAC_TriangleAmplitude_15) || \ - ((VALUE) == DAC_TriangleAmplitude_31) || \ - ((VALUE) == DAC_TriangleAmplitude_63) || \ - ((VALUE) == DAC_TriangleAmplitude_127) || \ - ((VALUE) == DAC_TriangleAmplitude_255) || \ - ((VALUE) == DAC_TriangleAmplitude_511) || \ - ((VALUE) == DAC_TriangleAmplitude_1023) || \ - ((VALUE) == DAC_TriangleAmplitude_2047) || \ - ((VALUE) == DAC_TriangleAmplitude_4095)) - -/* DAC output buffer */ -#define DAC_OutputBuffer_Enable ((u32)0x00000000) -#define DAC_OutputBuffer_Disable ((u32)0x00000002) - -#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ - ((STATE) == DAC_OutputBuffer_Disable)) - -/* DAC Channel selection */ -#define DAC_Channel_1 ((u32)0x00000000) -#define DAC_Channel_2 ((u32)0x00000010) - -#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ - ((CHANNEL) == DAC_Channel_2)) - -/* DAC data alignement */ -#define DAC_Align_12b_R ((u32)0x00000000) -#define DAC_Align_12b_L ((u32)0x00000004) -#define DAC_Align_8b_R ((u32)0x00000008) - -#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ - ((ALIGN) == DAC_Align_12b_L) || \ - ((ALIGN) == DAC_Align_8b_R)) - -/* DAC wave generation */ -#define DAC_Wave_Noise ((u32)0x00000040) -#define DAC_Wave_Triangle ((u32)0x00000080) - -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ - ((WAVE) == DAC_Wave_Triangle)) - -/* DAC data ------------------------------------------------------------------*/ -#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -void DAC_DeInit(void); -void DAC_Init(u32 DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); -void DAC_Cmd(u32 DAC_Channel, FunctionalState NewState); -void DAC_DMACmd(u32 DAC_Channel, FunctionalState NewState); -void DAC_SoftwareTriggerCmd(u32 DAC_Channel, FunctionalState NewState); -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); -void DAC_WaveGenerationCmd(u32 DAC_Channel, u32 DAC_Wave, FunctionalState NewState); -void DAC_SetChannel1Data(u32 DAC_Align, u16 Data); -void DAC_SetChannel2Data(u32 DAC_Align, u16 Data); -void DAC_SetDualChannelData(u32 DAC_Align, u16 Data2, u16 Data1); -u16 DAC_GetDataOutputValue(u32 DAC_Channel); - -#endif /*__STM32F10x_DAC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_dbgmcu.h b/bsp/stm32/library/inc/stm32f10x_dbgmcu.h deleted file mode 100644 index bd74964e3..000000000 --- a/bsp/stm32/library/inc/stm32f10x_dbgmcu.h +++ /dev/null @@ -1,55 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_dbgmcu.h -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file contains all the functions prototypes for the -* DBGMCU firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DBGMCU_H -#define __STM32F10x_DBGMCU_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -#define DBGMCU_SLEEP ((u32)0x00000001) -#define DBGMCU_STOP ((u32)0x00000002) -#define DBGMCU_STANDBY ((u32)0x00000004) -#define DBGMCU_IWDG_STOP ((u32)0x00000100) -#define DBGMCU_WWDG_STOP ((u32)0x00000200) -#define DBGMCU_TIM1_STOP ((u32)0x00000400) -#define DBGMCU_TIM2_STOP ((u32)0x00000800) -#define DBGMCU_TIM3_STOP ((u32)0x00001000) -#define DBGMCU_TIM4_STOP ((u32)0x00002000) -#define DBGMCU_CAN_STOP ((u32)0x00004000) -#define DBGMCU_I2C1_SMBUS_TIMEOUT ((u32)0x00008000) -#define DBGMCU_I2C2_SMBUS_TIMEOUT ((u32)0x00010000) -#define DBGMCU_TIM8_STOP ((u32)0x00020000) -#define DBGMCU_TIM5_STOP ((u32)0x00040000) -#define DBGMCU_TIM6_STOP ((u32)0x00080000) -#define DBGMCU_TIM7_STOP ((u32)0x00100000) - -#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFE000F8) == 0x00) && ((PERIPH) != 0x00)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -u32 DBGMCU_GetREVID(void); -u32 DBGMCU_GetDEVID(void); -void DBGMCU_Config(u32 DBGMCU_Periph, FunctionalState NewState); - -#endif /* __STM32F10x_DBGMCU_H */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ - - diff --git a/bsp/stm32/library/inc/stm32f10x_dma.h b/bsp/stm32/library/inc/stm32f10x_dma.h deleted file mode 100644 index e18b3e963..000000000 --- a/bsp/stm32/library/inc/stm32f10x_dma.h +++ /dev/null @@ -1,297 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dma.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* DMA firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DMA_H -#define __STM32F10x_DMA_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* DMA Init structure definition */ -typedef struct -{ - u32 DMA_PeripheralBaseAddr; - u32 DMA_MemoryBaseAddr; - u32 DMA_DIR; - u32 DMA_BufferSize; - u32 DMA_PeripheralInc; - u32 DMA_MemoryInc; - u32 DMA_PeripheralDataSize; - u32 DMA_MemoryDataSize; - u32 DMA_Mode; - u32 DMA_Priority; - u32 DMA_M2M; -}DMA_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_DMA_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == DMA1_Channel1_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel2_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel3_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel4_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel5_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel6_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA1_Channel7_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel1_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel2_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel3_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel4_BASE) || \ - ((*(u32*)&(PERIPH)) == DMA2_Channel5_BASE)) - -/* DMA data transfer direction -----------------------------------------------*/ -#define DMA_DIR_PeripheralDST ((u32)0x00000010) -#define DMA_DIR_PeripheralSRC ((u32)0x00000000) - -#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ - ((DIR) == DMA_DIR_PeripheralSRC)) - -/* DMA peripheral incremented mode -------------------------------------------*/ -#define DMA_PeripheralInc_Enable ((u32)0x00000040) -#define DMA_PeripheralInc_Disable ((u32)0x00000000) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ - ((STATE) == DMA_PeripheralInc_Disable)) - -/* DMA memory incremented mode -----------------------------------------------*/ -#define DMA_MemoryInc_Enable ((u32)0x00000080) -#define DMA_MemoryInc_Disable ((u32)0x00000000) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ - ((STATE) == DMA_MemoryInc_Disable)) - -/* DMA peripheral data size --------------------------------------------------*/ -#define DMA_PeripheralDataSize_Byte ((u32)0x00000000) -#define DMA_PeripheralDataSize_HalfWord ((u32)0x00000100) -#define DMA_PeripheralDataSize_Word ((u32)0x00000200) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ - ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ - ((SIZE) == DMA_PeripheralDataSize_Word)) - -/* DMA memory data size ------------------------------------------------------*/ -#define DMA_MemoryDataSize_Byte ((u32)0x00000000) -#define DMA_MemoryDataSize_HalfWord ((u32)0x00000400) -#define DMA_MemoryDataSize_Word ((u32)0x00000800) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ - ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ - ((SIZE) == DMA_MemoryDataSize_Word)) - -/* DMA circular/normal mode --------------------------------------------------*/ -#define DMA_Mode_Circular ((u32)0x00000020) -#define DMA_Mode_Normal ((u32)0x00000000) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) - -/* DMA priority level --------------------------------------------------------*/ -#define DMA_Priority_VeryHigh ((u32)0x00003000) -#define DMA_Priority_High ((u32)0x00002000) -#define DMA_Priority_Medium ((u32)0x00001000) -#define DMA_Priority_Low ((u32)0x00000000) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ - ((PRIORITY) == DMA_Priority_High) || \ - ((PRIORITY) == DMA_Priority_Medium) || \ - ((PRIORITY) == DMA_Priority_Low)) - -/* DMA memory to memory ------------------------------------------------------*/ -#define DMA_M2M_Enable ((u32)0x00004000) -#define DMA_M2M_Disable ((u32)0x00000000) - -#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) - -/* DMA interrupts definition -------------------------------------------------*/ -#define DMA_IT_TC ((u32)0x00000002) -#define DMA_IT_HT ((u32)0x00000004) -#define DMA_IT_TE ((u32)0x00000008) - -#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) - -/* For DMA1 */ -#define DMA1_IT_GL1 ((u32)0x00000001) -#define DMA1_IT_TC1 ((u32)0x00000002) -#define DMA1_IT_HT1 ((u32)0x00000004) -#define DMA1_IT_TE1 ((u32)0x00000008) -#define DMA1_IT_GL2 ((u32)0x00000010) -#define DMA1_IT_TC2 ((u32)0x00000020) -#define DMA1_IT_HT2 ((u32)0x00000040) -#define DMA1_IT_TE2 ((u32)0x00000080) -#define DMA1_IT_GL3 ((u32)0x00000100) -#define DMA1_IT_TC3 ((u32)0x00000200) -#define DMA1_IT_HT3 ((u32)0x00000400) -#define DMA1_IT_TE3 ((u32)0x00000800) -#define DMA1_IT_GL4 ((u32)0x00001000) -#define DMA1_IT_TC4 ((u32)0x00002000) -#define DMA1_IT_HT4 ((u32)0x00004000) -#define DMA1_IT_TE4 ((u32)0x00008000) -#define DMA1_IT_GL5 ((u32)0x00010000) -#define DMA1_IT_TC5 ((u32)0x00020000) -#define DMA1_IT_HT5 ((u32)0x00040000) -#define DMA1_IT_TE5 ((u32)0x00080000) -#define DMA1_IT_GL6 ((u32)0x00100000) -#define DMA1_IT_TC6 ((u32)0x00200000) -#define DMA1_IT_HT6 ((u32)0x00400000) -#define DMA1_IT_TE6 ((u32)0x00800000) -#define DMA1_IT_GL7 ((u32)0x01000000) -#define DMA1_IT_TC7 ((u32)0x02000000) -#define DMA1_IT_HT7 ((u32)0x04000000) -#define DMA1_IT_TE7 ((u32)0x08000000) -/* For DMA2 */ -#define DMA2_IT_GL1 ((u32)0x10000001) -#define DMA2_IT_TC1 ((u32)0x10000002) -#define DMA2_IT_HT1 ((u32)0x10000004) -#define DMA2_IT_TE1 ((u32)0x10000008) -#define DMA2_IT_GL2 ((u32)0x10000010) -#define DMA2_IT_TC2 ((u32)0x10000020) -#define DMA2_IT_HT2 ((u32)0x10000040) -#define DMA2_IT_TE2 ((u32)0x10000080) -#define DMA2_IT_GL3 ((u32)0x10000100) -#define DMA2_IT_TC3 ((u32)0x10000200) -#define DMA2_IT_HT3 ((u32)0x10000400) -#define DMA2_IT_TE3 ((u32)0x10000800) -#define DMA2_IT_GL4 ((u32)0x10001000) -#define DMA2_IT_TC4 ((u32)0x10002000) -#define DMA2_IT_HT4 ((u32)0x10004000) -#define DMA2_IT_TE4 ((u32)0x10008000) -#define DMA2_IT_GL5 ((u32)0x10010000) -#define DMA2_IT_TC5 ((u32)0x10020000) -#define DMA2_IT_HT5 ((u32)0x10040000) -#define DMA2_IT_TE5 ((u32)0x10080000) - -#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) -#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ - ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ - ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ - ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ - ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ - ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ - ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ - ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ - ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ - ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ - ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ - ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ - ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ - ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ - ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ - ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ - ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ - ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ - ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ - ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ - ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ - ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ - ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ - ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) - -/* DMA flags definition ------------------------------------------------------*/ -/* For DMA1 */ -#define DMA1_FLAG_GL1 ((u32)0x00000001) -#define DMA1_FLAG_TC1 ((u32)0x00000002) -#define DMA1_FLAG_HT1 ((u32)0x00000004) -#define DMA1_FLAG_TE1 ((u32)0x00000008) -#define DMA1_FLAG_GL2 ((u32)0x00000010) -#define DMA1_FLAG_TC2 ((u32)0x00000020) -#define DMA1_FLAG_HT2 ((u32)0x00000040) -#define DMA1_FLAG_TE2 ((u32)0x00000080) -#define DMA1_FLAG_GL3 ((u32)0x00000100) -#define DMA1_FLAG_TC3 ((u32)0x00000200) -#define DMA1_FLAG_HT3 ((u32)0x00000400) -#define DMA1_FLAG_TE3 ((u32)0x00000800) -#define DMA1_FLAG_GL4 ((u32)0x00001000) -#define DMA1_FLAG_TC4 ((u32)0x00002000) -#define DMA1_FLAG_HT4 ((u32)0x00004000) -#define DMA1_FLAG_TE4 ((u32)0x00008000) -#define DMA1_FLAG_GL5 ((u32)0x00010000) -#define DMA1_FLAG_TC5 ((u32)0x00020000) -#define DMA1_FLAG_HT5 ((u32)0x00040000) -#define DMA1_FLAG_TE5 ((u32)0x00080000) -#define DMA1_FLAG_GL6 ((u32)0x00100000) -#define DMA1_FLAG_TC6 ((u32)0x00200000) -#define DMA1_FLAG_HT6 ((u32)0x00400000) -#define DMA1_FLAG_TE6 ((u32)0x00800000) -#define DMA1_FLAG_GL7 ((u32)0x01000000) -#define DMA1_FLAG_TC7 ((u32)0x02000000) -#define DMA1_FLAG_HT7 ((u32)0x04000000) -#define DMA1_FLAG_TE7 ((u32)0x08000000) -/* For DMA2 */ -#define DMA2_FLAG_GL1 ((u32)0x10000001) -#define DMA2_FLAG_TC1 ((u32)0x10000002) -#define DMA2_FLAG_HT1 ((u32)0x10000004) -#define DMA2_FLAG_TE1 ((u32)0x10000008) -#define DMA2_FLAG_GL2 ((u32)0x10000010) -#define DMA2_FLAG_TC2 ((u32)0x10000020) -#define DMA2_FLAG_HT2 ((u32)0x10000040) -#define DMA2_FLAG_TE2 ((u32)0x10000080) -#define DMA2_FLAG_GL3 ((u32)0x10000100) -#define DMA2_FLAG_TC3 ((u32)0x10000200) -#define DMA2_FLAG_HT3 ((u32)0x10000400) -#define DMA2_FLAG_TE3 ((u32)0x10000800) -#define DMA2_FLAG_GL4 ((u32)0x10001000) -#define DMA2_FLAG_TC4 ((u32)0x10002000) -#define DMA2_FLAG_HT4 ((u32)0x10004000) -#define DMA2_FLAG_TE4 ((u32)0x10008000) -#define DMA2_FLAG_GL5 ((u32)0x10010000) -#define DMA2_FLAG_TC5 ((u32)0x10020000) -#define DMA2_FLAG_HT5 ((u32)0x10040000) -#define DMA2_FLAG_TE5 ((u32)0x10080000) - -#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) -#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ - ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ - ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ - ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ - ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ - ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ - ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ - ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ - ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ - ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ - ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ - ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ - ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ - ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ - ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ - ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ - ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ - ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ - ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ - ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ - ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ - ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ - ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ - ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) - -/* DMA Buffer Size -----------------------------------------------------------*/ -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, u32 DMA_IT, FunctionalState NewState); -u16 DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); -FlagStatus DMA_GetFlagStatus(u32 DMA_FLAG); -void DMA_ClearFlag(u32 DMA_FLAG); -ITStatus DMA_GetITStatus(u32 DMA_IT); -void DMA_ClearITPendingBit(u32 DMA_IT); - -#endif /*__STM32F10x_DMA_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_exti.h b/bsp/stm32/library/inc/stm32f10x_exti.h deleted file mode 100644 index c9bfe5903..000000000 --- a/bsp/stm32/library/inc/stm32f10x_exti.h +++ /dev/null @@ -1,107 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_exti.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* EXTI firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_EXTI_H -#define __STM32F10x_EXTI_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* EXTI mode enumeration -----------------------------------------------------*/ -typedef enum -{ - EXTI_Mode_Interrupt = 0x00, - EXTI_Mode_Event = 0x04 -}EXTIMode_TypeDef; - -#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) - -/* EXTI Trigger enumeration --------------------------------------------------*/ -typedef enum -{ - EXTI_Trigger_Rising = 0x08, - EXTI_Trigger_Falling = 0x0C, - EXTI_Trigger_Rising_Falling = 0x10 -}EXTITrigger_TypeDef; - -#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ - ((TRIGGER) == EXTI_Trigger_Falling) || \ - ((TRIGGER) == EXTI_Trigger_Rising_Falling)) - -/* EXTI Init Structure definition --------------------------------------------*/ -typedef struct -{ - u32 EXTI_Line; - EXTIMode_TypeDef EXTI_Mode; - EXTITrigger_TypeDef EXTI_Trigger; - FunctionalState EXTI_LineCmd; -}EXTI_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* EXTI Lines ----------------------------------------------------------------*/ -#define EXTI_Line0 ((u32)0x00001) /* External interrupt line 0 */ -#define EXTI_Line1 ((u32)0x00002) /* External interrupt line 1 */ -#define EXTI_Line2 ((u32)0x00004) /* External interrupt line 2 */ -#define EXTI_Line3 ((u32)0x00008) /* External interrupt line 3 */ -#define EXTI_Line4 ((u32)0x00010) /* External interrupt line 4 */ -#define EXTI_Line5 ((u32)0x00020) /* External interrupt line 5 */ -#define EXTI_Line6 ((u32)0x00040) /* External interrupt line 6 */ -#define EXTI_Line7 ((u32)0x00080) /* External interrupt line 7 */ -#define EXTI_Line8 ((u32)0x00100) /* External interrupt line 8 */ -#define EXTI_Line9 ((u32)0x00200) /* External interrupt line 9 */ -#define EXTI_Line10 ((u32)0x00400) /* External interrupt line 10 */ -#define EXTI_Line11 ((u32)0x00800) /* External interrupt line 11 */ -#define EXTI_Line12 ((u32)0x01000) /* External interrupt line 12 */ -#define EXTI_Line13 ((u32)0x02000) /* External interrupt line 13 */ -#define EXTI_Line14 ((u32)0x04000) /* External interrupt line 14 */ -#define EXTI_Line15 ((u32)0x08000) /* External interrupt line 15 */ -#define EXTI_Line16 ((u32)0x10000) /* External interrupt line 16 - Connected to the PVD Output */ -#define EXTI_Line17 ((u32)0x20000) /* External interrupt line 17 - Connected to the RTC Alarm event */ -#define EXTI_Line18 ((u32)0x40000) /* External interrupt line 18 - Connected to the USB Wakeup from - suspend event */ - -#define IS_EXTI_LINE(LINE) ((((LINE) & (u32)0xFFF80000) == 0x00) && ((LINE) != (u16)0x00)) - -#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ - ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ - ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ - ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ - ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ - ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ - ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ - ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ - ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ - ((LINE) == EXTI_Line18)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void EXTI_DeInit(void); -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_GenerateSWInterrupt(u32 EXTI_Line); -FlagStatus EXTI_GetFlagStatus(u32 EXTI_Line); -void EXTI_ClearFlag(u32 EXTI_Line); -ITStatus EXTI_GetITStatus(u32 EXTI_Line); -void EXTI_ClearITPendingBit(u32 EXTI_Line); - -#endif /* __STM32F10x_EXTI_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_flash.h b/bsp/stm32/library/inc/stm32f10x_flash.h deleted file mode 100644 index 449fca0f9..000000000 --- a/bsp/stm32/library/inc/stm32f10x_flash.h +++ /dev/null @@ -1,208 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_flash.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* FLASH firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FLASH_H -#define __STM32F10x_FLASH_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -#ifdef _FLASH_PROG -/* FLASH Status */ -typedef enum -{ - FLASH_BUSY = 1, - FLASH_ERROR_PG, - FLASH_ERROR_WRP, - FLASH_COMPLETE, - FLASH_TIMEOUT -}FLASH_Status; -#endif - -/* Flash Latency -------------------------------------------------------------*/ -#define FLASH_Latency_0 ((u32)0x00000000) /* FLASH Zero Latency cycle */ -#define FLASH_Latency_1 ((u32)0x00000001) /* FLASH One Latency cycle */ -#define FLASH_Latency_2 ((u32)0x00000002) /* FLASH Two Latency cycles */ - -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ - ((LATENCY) == FLASH_Latency_1) || \ - ((LATENCY) == FLASH_Latency_2)) - -/* Half Cycle Enable/Disable -------------------------------------------------*/ -#define FLASH_HalfCycleAccess_Enable ((u32)0x00000008) /* FLASH Half Cycle Enable */ -#define FLASH_HalfCycleAccess_Disable ((u32)0x00000000) /* FLASH Half Cycle Disable */ - -#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ - ((STATE) == FLASH_HalfCycleAccess_Disable)) - - -/* Prefetch Buffer Enable/Disable --------------------------------------------*/ -#define FLASH_PrefetchBuffer_Enable ((u32)0x00000010) /* FLASH Prefetch Buffer Enable */ -#define FLASH_PrefetchBuffer_Disable ((u32)0x00000000) /* FLASH Prefetch Buffer Disable */ - -#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ - ((STATE) == FLASH_PrefetchBuffer_Disable)) - -#ifdef _FLASH_PROG -/* Option Bytes Write Protection ---------------------------------------------*/ -/* Values to be used with STM32F10Xxx Medium-density devices: FLASH memory density - ranges between 32 and 128 Kbytes with page size equal to 1 Kbytes */ -#define FLASH_WRProt_Pages0to3 ((u32)0x00000001) /* Write protection of page 0 to 3 */ -#define FLASH_WRProt_Pages4to7 ((u32)0x00000002) /* Write protection of page 4 to 7 */ -#define FLASH_WRProt_Pages8to11 ((u32)0x00000004) /* Write protection of page 8 to 11 */ -#define FLASH_WRProt_Pages12to15 ((u32)0x00000008) /* Write protection of page 12 to 15 */ -#define FLASH_WRProt_Pages16to19 ((u32)0x00000010) /* Write protection of page 16 to 19 */ -#define FLASH_WRProt_Pages20to23 ((u32)0x00000020) /* Write protection of page 20 to 23 */ -#define FLASH_WRProt_Pages24to27 ((u32)0x00000040) /* Write protection of page 24 to 27 */ -#define FLASH_WRProt_Pages28to31 ((u32)0x00000080) /* Write protection of page 28 to 31 */ -#define FLASH_WRProt_Pages32to35 ((u32)0x00000100) /* Write protection of page 32 to 35 */ -#define FLASH_WRProt_Pages36to39 ((u32)0x00000200) /* Write protection of page 36 to 39 */ -#define FLASH_WRProt_Pages40to43 ((u32)0x00000400) /* Write protection of page 40 to 43 */ -#define FLASH_WRProt_Pages44to47 ((u32)0x00000800) /* Write protection of page 44 to 47 */ -#define FLASH_WRProt_Pages48to51 ((u32)0x00001000) /* Write protection of page 48 to 51 */ -#define FLASH_WRProt_Pages52to55 ((u32)0x00002000) /* Write protection of page 52 to 55 */ -#define FLASH_WRProt_Pages56to59 ((u32)0x00004000) /* Write protection of page 56 to 59 */ -#define FLASH_WRProt_Pages60to63 ((u32)0x00008000) /* Write protection of page 60 to 63 */ -#define FLASH_WRProt_Pages64to67 ((u32)0x00010000) /* Write protection of page 64 to 67 */ -#define FLASH_WRProt_Pages68to71 ((u32)0x00020000) /* Write protection of page 68 to 71 */ -#define FLASH_WRProt_Pages72to75 ((u32)0x00040000) /* Write protection of page 72 to 75 */ -#define FLASH_WRProt_Pages76to79 ((u32)0x00080000) /* Write protection of page 76 to 79 */ -#define FLASH_WRProt_Pages80to83 ((u32)0x00100000) /* Write protection of page 80 to 83 */ -#define FLASH_WRProt_Pages84to87 ((u32)0x00200000) /* Write protection of page 84 to 87 */ -#define FLASH_WRProt_Pages88to91 ((u32)0x00400000) /* Write protection of page 88 to 91 */ -#define FLASH_WRProt_Pages92to95 ((u32)0x00800000) /* Write protection of page 92 to 95 */ -#define FLASH_WRProt_Pages96to99 ((u32)0x01000000) /* Write protection of page 96 to 99 */ -#define FLASH_WRProt_Pages100to103 ((u32)0x02000000) /* Write protection of page 100 to 103 */ -#define FLASH_WRProt_Pages104to107 ((u32)0x04000000) /* Write protection of page 104 to 107 */ -#define FLASH_WRProt_Pages108to111 ((u32)0x08000000) /* Write protection of page 108 to 111 */ -#define FLASH_WRProt_Pages112to115 ((u32)0x10000000) /* Write protection of page 112 to 115 */ -#define FLASH_WRProt_Pages116to119 ((u32)0x20000000) /* Write protection of page 115 to 119 */ -#define FLASH_WRProt_Pages120to123 ((u32)0x40000000) /* Write protection of page 120 to 123 */ -#define FLASH_WRProt_Pages124to127 ((u32)0x80000000) /* Write protection of page 124 to 127 */ -/* Values to be used with STM32F10Xxx High-density devices: FLASH memory density - ranges between 256 and 512 Kbytes with page size equal to 2 Kbytes */ -#define FLASH_WRProt_Pages0to1 ((u32)0x00000001) /* Write protection of page 0 to 1 */ -#define FLASH_WRProt_Pages2to3 ((u32)0x00000002) /* Write protection of page 2 to 3 */ -#define FLASH_WRProt_Pages4to5 ((u32)0x00000004) /* Write protection of page 4 to 5 */ -#define FLASH_WRProt_Pages6to7 ((u32)0x00000008) /* Write protection of page 6 to 7 */ -#define FLASH_WRProt_Pages8to9 ((u32)0x00000010) /* Write protection of page 8 to 9 */ -#define FLASH_WRProt_Pages10to11 ((u32)0x00000020) /* Write protection of page 10 to 11 */ -#define FLASH_WRProt_Pages12to13 ((u32)0x00000040) /* Write protection of page 12 to 13 */ -#define FLASH_WRProt_Pages14to15 ((u32)0x00000080) /* Write protection of page 14 to 15 */ -#define FLASH_WRProt_Pages16to17 ((u32)0x00000100) /* Write protection of page 16 to 17 */ -#define FLASH_WRProt_Pages18to19 ((u32)0x00000200) /* Write protection of page 18 to 19 */ -#define FLASH_WRProt_Pages20to21 ((u32)0x00000400) /* Write protection of page 20 to 21 */ -#define FLASH_WRProt_Pages22to23 ((u32)0x00000800) /* Write protection of page 22 to 23 */ -#define FLASH_WRProt_Pages24to25 ((u32)0x00001000) /* Write protection of page 24 to 25 */ -#define FLASH_WRProt_Pages26to27 ((u32)0x00002000) /* Write protection of page 26 to 27 */ -#define FLASH_WRProt_Pages28to29 ((u32)0x00004000) /* Write protection of page 28 to 29 */ -#define FLASH_WRProt_Pages30to31 ((u32)0x00008000) /* Write protection of page 30 to 31 */ -#define FLASH_WRProt_Pages32to33 ((u32)0x00010000) /* Write protection of page 32 to 33 */ -#define FLASH_WRProt_Pages34to35 ((u32)0x00020000) /* Write protection of page 34 to 35 */ -#define FLASH_WRProt_Pages36to37 ((u32)0x00040000) /* Write protection of page 36 to 37 */ -#define FLASH_WRProt_Pages38to39 ((u32)0x00080000) /* Write protection of page 38 to 39 */ -#define FLASH_WRProt_Pages40to41 ((u32)0x00100000) /* Write protection of page 40 to 41 */ -#define FLASH_WRProt_Pages42to43 ((u32)0x00200000) /* Write protection of page 42 to 43 */ -#define FLASH_WRProt_Pages44to45 ((u32)0x00400000) /* Write protection of page 44 to 45 */ -#define FLASH_WRProt_Pages46to47 ((u32)0x00800000) /* Write protection of page 46 to 47 */ -#define FLASH_WRProt_Pages48to49 ((u32)0x01000000) /* Write protection of page 48 to 49 */ -#define FLASH_WRProt_Pages50to51 ((u32)0x02000000) /* Write protection of page 50 to 51 */ -#define FLASH_WRProt_Pages52to53 ((u32)0x04000000) /* Write protection of page 52 to 53 */ -#define FLASH_WRProt_Pages54to55 ((u32)0x08000000) /* Write protection of page 54 to 55 */ -#define FLASH_WRProt_Pages56to57 ((u32)0x10000000) /* Write protection of page 56 to 57 */ -#define FLASH_WRProt_Pages58to59 ((u32)0x20000000) /* Write protection of page 58 to 59 */ -#define FLASH_WRProt_Pages60to61 ((u32)0x40000000) /* Write protection of page 60 to 61 */ -#define FLASH_WRProt_Pages62to255 ((u32)0x80000000) /* Write protection of page 62 to 255 */ -#define FLASH_WRProt_AllPages ((u32)0xFFFFFFFF) /* Write protection of all Pages */ - -#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) - -#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0807FFFF)) -#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) - -/* Option Bytes IWatchdog ----------------------------------------------------*/ -#define OB_IWDG_SW ((u16)0x0001) /* Software IWDG selected */ -#define OB_IWDG_HW ((u16)0x0000) /* Hardware IWDG selected */ - -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) - -/* Option Bytes nRST_STOP ----------------------------------------------------*/ -#define OB_STOP_NoRST ((u16)0x0002) /* No reset generated when entering in STOP */ -#define OB_STOP_RST ((u16)0x0000) /* Reset generated when entering in STOP */ - -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) - -/* Option Bytes nRST_STDBY ---------------------------------------------------*/ -#define OB_STDBY_NoRST ((u16)0x0004) /* No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((u16)0x0000) /* Reset generated when entering in STANDBY */ - -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) - -/* FLASH Interrupts ----------------------------------------------------------*/ -#define FLASH_IT_ERROR ((u32)0x00000400) /* FPEC error interrupt source */ -#define FLASH_IT_EOP ((u32)0x00001000) /* End of FLASH Operation Interrupt source */ - -#define IS_FLASH_IT(IT) ((((IT) & (u32)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) - -/* FLASH Flags ---------------------------------------------------------------*/ -#define FLASH_FLAG_BSY ((u32)0x00000001) /* FLASH Busy flag */ -#define FLASH_FLAG_EOP ((u32)0x00000020) /* FLASH End of Operation flag */ -#define FLASH_FLAG_PGERR ((u32)0x00000004) /* FLASH Program error flag */ -#define FLASH_FLAG_WRPRTERR ((u32)0x00000010) /* FLASH Write protected error flag */ -#define FLASH_FLAG_OPTERR ((u32)0x00000001) /* FLASH Option Byte error flag */ - -#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) - -#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ - ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ - ((FLAG) == FLASH_FLAG_OPTERR)) -#endif - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void FLASH_SetLatency(u32 FLASH_Latency); -void FLASH_HalfCycleAccessCmd(u32 FLASH_HalfCycleAccess); -void FLASH_PrefetchBufferCmd(u32 FLASH_PrefetchBuffer); - -#ifdef _FLASH_PROG -void FLASH_Unlock(void); -void FLASH_Lock(void); -FLASH_Status FLASH_ErasePage(u32 Page_Address); -FLASH_Status FLASH_EraseAllPages(void); -FLASH_Status FLASH_EraseOptionBytes(void); -FLASH_Status FLASH_ProgramWord(u32 Address, u32 Data); -FLASH_Status FLASH_ProgramHalfWord(u32 Address, u16 Data); -FLASH_Status FLASH_ProgramOptionByteData(u32 Address, u8 Data); -FLASH_Status FLASH_EnableWriteProtection(u32 FLASH_Pages); -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); -FLASH_Status FLASH_UserOptionByteConfig(u16 OB_IWDG, u16 OB_STOP, u16 OB_STDBY); -u32 FLASH_GetUserOptionByte(void); -u32 FLASH_GetWriteProtectionOptionByte(void); -FlagStatus FLASH_GetReadOutProtectionStatus(void); -FlagStatus FLASH_GetPrefetchBufferStatus(void); -void FLASH_ITConfig(u16 FLASH_IT, FunctionalState NewState); -FlagStatus FLASH_GetFlagStatus(u16 FLASH_FLAG); -void FLASH_ClearFlag(u16 FLASH_FLAG); -FLASH_Status FLASH_GetStatus(void); -FLASH_Status FLASH_WaitForLastOperation(u32 Timeout); -#endif - -#endif /* __STM32F10x_FLASH_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_fsmc.h b/bsp/stm32/library/inc/stm32f10x_fsmc.h deleted file mode 100644 index 699d69fa3..000000000 --- a/bsp/stm32/library/inc/stm32f10x_fsmc.h +++ /dev/null @@ -1,337 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_fsmc.h -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file contains all the functions prototypes for the -* FSMC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FSMC_H -#define __STM32F10x_FSMC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Timing parameters For NOR/SRAM Banks */ -typedef struct -{ - u32 FSMC_AddressSetupTime; - u32 FSMC_AddressHoldTime; - u32 FSMC_DataSetupTime; - u32 FSMC_BusTurnAroundDuration; - u32 FSMC_CLKDivision; - u32 FSMC_DataLatency; - u32 FSMC_AccessMode; -}FSMC_NORSRAMTimingInitTypeDef; - -/* FSMC NOR/SRAM Init structure definition */ -typedef struct -{ - u32 FSMC_Bank; - u32 FSMC_DataAddressMux; - u32 FSMC_MemoryType; - u32 FSMC_MemoryDataWidth; - u32 FSMC_BurstAccessMode; - u32 FSMC_WaitSignalPolarity; - u32 FSMC_WrapMode; - u32 FSMC_WaitSignalActive; - u32 FSMC_WriteOperation; - u32 FSMC_WaitSignal; - u32 FSMC_ExtendedMode; - u32 FSMC_WriteBurst; - /* Timing Parameters for write and read access if the ExtendedMode is not used*/ - FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; - /* Timing Parameters for write access if the ExtendedMode is used*/ - FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; -}FSMC_NORSRAMInitTypeDef; - -/* Timing parameters For FSMC NAND and PCCARD Banks */ -typedef struct -{ - u32 FSMC_SetupTime; - u32 FSMC_WaitSetupTime; - u32 FSMC_HoldSetupTime; - u32 FSMC_HiZSetupTime; -}FSMC_NAND_PCCARDTimingInitTypeDef; - -/* FSMC NAND Init structure definition */ -typedef struct -{ - u32 FSMC_Bank; - u32 FSMC_Waitfeature; - u32 FSMC_MemoryDataWidth; - u32 FSMC_ECC; - u32 FSMC_ECCPageSize; - u32 FSMC_TCLRSetupTime; - u32 FSMC_TARSetupTime; - /* FSMC Common Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; - /* FSMC Attribute Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; -}FSMC_NANDInitTypeDef; - -/* FSMC PCCARD Init structure definition */ -typedef struct -{ - u32 FSMC_Waitfeature; - u32 FSMC_TCLRSetupTime; - u32 FSMC_TARSetupTime; - /* FSMC Common Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; - /* FSMC Attribute Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; - /* FSMC IO Space Timing */ - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; -}FSMC_PCCARDInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/*-------------------------------FSMC Banks definitions ----------------------*/ -#define FSMC_Bank1_NORSRAM1 ((u32)0x00000000) -#define FSMC_Bank1_NORSRAM2 ((u32)0x00000002) -#define FSMC_Bank1_NORSRAM3 ((u32)0x00000004) -#define FSMC_Bank1_NORSRAM4 ((u32)0x00000006) -#define FSMC_Bank2_NAND ((u32)0x00000010) -#define FSMC_Bank3_NAND ((u32)0x00000100) -#define FSMC_Bank4_PCCARD ((u32)0x00001000) - -#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ - ((BANK) == FSMC_Bank1_NORSRAM2) || \ - ((BANK) == FSMC_Bank1_NORSRAM3) || \ - ((BANK) == FSMC_Bank1_NORSRAM4)) - - -#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND)) - -#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - -#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - - -/*------------------------------- NOR/SRAM Banks -----------------------------*/ -/* FSMC Data/Address Bus Multiplexing ----------------------------------------*/ -#define FSMC_DataAddressMux_Disable ((u32)0x00000000) -#define FSMC_DataAddressMux_Enable ((u32)0x00000002) - -#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ - ((MUX) == FSMC_DataAddressMux_Enable)) - -/* FSMC Memory Type ----------------------------------------------------------*/ -#define FSMC_MemoryType_SRAM ((u32)0x00000000) -#define FSMC_MemoryType_PSRAM ((u32)0x00000004) -#define FSMC_MemoryType_NOR ((u32)0x00000008) - -#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ - ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ - ((MEMORY) == FSMC_MemoryType_NOR)) - -/* FSMC Data Width ----------------------------------------------------------*/ -#define FSMC_MemoryDataWidth_8b ((u32)0x00000000) -#define FSMC_MemoryDataWidth_16b ((u32)0x00000010) - -#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ - ((WIDTH) == FSMC_MemoryDataWidth_16b)) - - -/* FSMC Burst Access Mode ----------------------------------------------------*/ -#define FSMC_BurstAccessMode_Disable ((u32)0x00000000) -#define FSMC_BurstAccessMode_Enable ((u32)0x00000100) - -#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ - ((STATE) == FSMC_BurstAccessMode_Enable)) - -/* FSMC Wait Signal Polarity -------------------------------------------------*/ -#define FSMC_WaitSignalPolarity_Low ((u32)0x00000000) -#define FSMC_WaitSignalPolarity_High ((u32)0x00000200) - -#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ - ((POLARITY) == FSMC_WaitSignalPolarity_High)) - -/* FSMC Wrap Mode ------------------------------------------------------------*/ -#define FSMC_WrapMode_Disable ((u32)0x00000000) -#define FSMC_WrapMode_Enable ((u32)0x00000400) - -#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ - ((MODE) == FSMC_WrapMode_Enable)) - -/* FSMC Wait Timing ----------------------------------------------------------*/ -#define FSMC_WaitSignalActive_BeforeWaitState ((u32)0x00000000) -#define FSMC_WaitSignalActive_DuringWaitState ((u32)0x00000800) - -#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ - ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) - -/* FSMC Write Operation ------------------------------------------------------*/ -#define FSMC_WriteOperation_Disable ((u32)0x00000000) -#define FSMC_WriteOperation_Enable ((u32)0x00001000) - -#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ - ((OPERATION) == FSMC_WriteOperation_Enable)) - -/* FSMC Wait Signal ----------------------------------------------------------*/ -#define FSMC_WaitSignal_Disable ((u32)0x00000000) -#define FSMC_WaitSignal_Enable ((u32)0x00002000) - -#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ - ((SIGNAL) == FSMC_WaitSignal_Enable)) - -/* FSMC Extended Mode --------------------------------------------------------*/ -#define FSMC_ExtendedMode_Disable ((u32)0x00000000) -#define FSMC_ExtendedMode_Enable ((u32)0x00004000) - -#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ - ((MODE) == FSMC_ExtendedMode_Enable)) - -/* FSMC Write Burst ----------------------------------------------------------*/ -#define FSMC_WriteBurst_Disable ((u32)0x00000000) -#define FSMC_WriteBurst_Enable ((u32)0x00080000) - -#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ - ((BURST) == FSMC_WriteBurst_Enable)) - -/* FSMC Address Setup Time ---------------------------------------------------*/ -#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) - -/* FSMC Address Hold Time ----------------------------------------------------*/ -#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) - -/* FSMC Data Setup Time ------------------------------------------------------*/ -#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) - -/* FSMC Bus Turn around Duration ---------------------------------------------*/ -#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) - -/* FSMC CLK Division ---------------------------------------------------------*/ -#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) - -/* FSMC Data Latency ---------------------------------------------------------*/ -#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) - -/* FSMC Access Mode ----------------------------------------------------------*/ -#define FSMC_AccessMode_A ((u32)0x00000000) -#define FSMC_AccessMode_B ((u32)0x10000000) -#define FSMC_AccessMode_C ((u32)0x20000000) -#define FSMC_AccessMode_D ((u32)0x30000000) - -#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ - ((MODE) == FSMC_AccessMode_B) || \ - ((MODE) == FSMC_AccessMode_C) || \ - ((MODE) == FSMC_AccessMode_D)) - -/*----------------------------- NAND and PCCARD Banks ------------------------*/ -/* FSMC Wait feature ---------------------------------------------------------*/ -#define FSMC_Waitfeature_Disable ((u32)0x00000000) -#define FSMC_Waitfeature_Enable ((u32)0x00000002) - -#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ - ((FEATURE) == FSMC_Waitfeature_Enable)) - -/* FSMC Memory Data Width ----------------------------------------------------*/ -#define FSMC_MemoryDataWidth_8b ((u32)0x00000000) -#define FSMC_MemoryDataWidth_16b ((u32)0x00000010) - -#define IS_FSMC_DATA_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ - ((WIDTH) == FSMC_MemoryDataWidth_16b)) - -/* FSMC ECC ------------------------------------------------------------------*/ -#define FSMC_ECC_Disable ((u32)0x00000000) -#define FSMC_ECC_Enable ((u32)0x00000040) - -#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ - ((STATE) == FSMC_ECC_Enable)) - -/* FSMC ECC Page Size --------------------------------------------------------*/ -#define FSMC_ECCPageSize_256Bytes ((u32)0x00000000) -#define FSMC_ECCPageSize_512Bytes ((u32)0x00020000) -#define FSMC_ECCPageSize_1024Bytes ((u32)0x00040000) -#define FSMC_ECCPageSize_2048Bytes ((u32)0x00060000) -#define FSMC_ECCPageSize_4096Bytes ((u32)0x00080000) -#define FSMC_ECCPageSize_8192Bytes ((u32)0x000A0000) - -#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_8192Bytes)) - -/* FSMC TCLR Setup Time ------------------------------------------------------*/ -#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC TAR Setup Time -------------------------------------------------------*/ -#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Setup Time ----------------------------------------------------*/ -#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Wait Setup Time -----------------------------------------------*/ -#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Hold Setup Time -----------------------------------------------*/ -#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC HiZ Setup Time ------------------------------------------------*/ -#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) - -/* FSMC Interrupt sources ----------------------------------------------------*/ -#define FSMC_IT_RisingEdge ((u32)0x00000008) -#define FSMC_IT_Level ((u32)0x00000010) -#define FSMC_IT_FallingEdge ((u32)0x00000020) - -#define IS_FSMC_IT(IT) ((((IT) & (u32)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) - -#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ - ((IT) == FSMC_IT_Level) || \ - ((IT) == FSMC_IT_FallingEdge)) - -/* FSMC Flags ----------------------------------------------------------------*/ -#define FSMC_FLAG_RisingEdge ((u32)0x00000001) -#define FSMC_FLAG_Level ((u32)0x00000002) -#define FSMC_FLAG_FallingEdge ((u32)0x00000004) -#define FSMC_FLAG_FEMPT ((u32)0x00000040) - -#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ - ((FLAG) == FSMC_FLAG_Level) || \ - ((FLAG) == FSMC_FLAG_FallingEdge) || \ - ((FLAG) == FSMC_FLAG_FEMPT)) - -#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void FSMC_NORSRAMDeInit(u32 FSMC_Bank); -void FSMC_NANDDeInit(u32 FSMC_Bank); -void FSMC_PCCARDDeInit(void); -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMCmd(u32 FSMC_Bank, FunctionalState NewState); -void FSMC_NANDCmd(u32 FSMC_Bank, FunctionalState NewState); -void FSMC_PCCARDCmd(FunctionalState NewState); -void FSMC_NANDECCCmd(u32 FSMC_Bank, FunctionalState NewState); -u32 FSMC_GetECC(u32 FSMC_Bank); -void FSMC_ITConfig(u32 FSMC_Bank, u32 FSMC_IT, FunctionalState NewState); -FlagStatus FSMC_GetFlagStatus(u32 FSMC_Bank, u32 FSMC_FLAG); -void FSMC_ClearFlag(u32 FSMC_Bank, u32 FSMC_FLAG); -ITStatus FSMC_GetITStatus(u32 FSMC_Bank, u32 FSMC_IT); -void FSMC_ClearITPendingBit(u32 FSMC_Bank, u32 FSMC_IT); - -#endif /*__STM32F10x_FSMC_H */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_gpio.h b/bsp/stm32/library/inc/stm32f10x_gpio.h deleted file mode 100644 index 484584100..000000000 --- a/bsp/stm32/library/inc/stm32f10x_gpio.h +++ /dev/null @@ -1,237 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_gpio.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* GPIO firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_GPIO_H -#define __STM32F10x_GPIO_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -#define IS_GPIO_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == GPIOA_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOB_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOC_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOD_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOE_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOF_BASE) || \ - ((*(u32*)&(PERIPH)) == GPIOG_BASE)) - -/* Output Maximum frequency selection ----------------------------------------*/ -typedef enum -{ - GPIO_Speed_10MHz = 1, - GPIO_Speed_2MHz, - GPIO_Speed_50MHz -}GPIOSpeed_TypeDef; - -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ - ((SPEED) == GPIO_Speed_50MHz)) - -/* Configuration Mode enumeration --------------------------------------------*/ -typedef enum -{ GPIO_Mode_AIN = 0x0, - GPIO_Mode_IN_FLOATING = 0x04, - GPIO_Mode_IPD = 0x28, - GPIO_Mode_IPU = 0x48, - GPIO_Mode_Out_OD = 0x14, - GPIO_Mode_Out_PP = 0x10, - GPIO_Mode_AF_OD = 0x1C, - GPIO_Mode_AF_PP = 0x18 -}GPIOMode_TypeDef; - -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ - ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ - ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ - ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) - -/* GPIO Init structure definition */ -typedef struct -{ - u16 GPIO_Pin; - GPIOSpeed_TypeDef GPIO_Speed; - GPIOMode_TypeDef GPIO_Mode; -}GPIO_InitTypeDef; - -/* Bit_SET and Bit_RESET enumeration -----------------------------------------*/ -typedef enum -{ Bit_RESET = 0, - Bit_SET -}BitAction; -#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) - -/* Exported constants --------------------------------------------------------*/ -/* GPIO pins define ----------------------------------------------------------*/ -#define GPIO_Pin_0 ((u16)0x0001) /* Pin 0 selected */ -#define GPIO_Pin_1 ((u16)0x0002) /* Pin 1 selected */ -#define GPIO_Pin_2 ((u16)0x0004) /* Pin 2 selected */ -#define GPIO_Pin_3 ((u16)0x0008) /* Pin 3 selected */ -#define GPIO_Pin_4 ((u16)0x0010) /* Pin 4 selected */ -#define GPIO_Pin_5 ((u16)0x0020) /* Pin 5 selected */ -#define GPIO_Pin_6 ((u16)0x0040) /* Pin 6 selected */ -#define GPIO_Pin_7 ((u16)0x0080) /* Pin 7 selected */ -#define GPIO_Pin_8 ((u16)0x0100) /* Pin 8 selected */ -#define GPIO_Pin_9 ((u16)0x0200) /* Pin 9 selected */ -#define GPIO_Pin_10 ((u16)0x0400) /* Pin 10 selected */ -#define GPIO_Pin_11 ((u16)0x0800) /* Pin 11 selected */ -#define GPIO_Pin_12 ((u16)0x1000) /* Pin 12 selected */ -#define GPIO_Pin_13 ((u16)0x2000) /* Pin 13 selected */ -#define GPIO_Pin_14 ((u16)0x4000) /* Pin 14 selected */ -#define GPIO_Pin_15 ((u16)0x8000) /* Pin 15 selected */ -#define GPIO_Pin_All ((u16)0xFFFF) /* All pins selected */ - -#define IS_GPIO_PIN(PIN) ((((PIN) & (u16)0x00) == 0x00) && ((PIN) != (u16)0x00)) - -#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ - ((PIN) == GPIO_Pin_1) || \ - ((PIN) == GPIO_Pin_2) || \ - ((PIN) == GPIO_Pin_3) || \ - ((PIN) == GPIO_Pin_4) || \ - ((PIN) == GPIO_Pin_5) || \ - ((PIN) == GPIO_Pin_6) || \ - ((PIN) == GPIO_Pin_7) || \ - ((PIN) == GPIO_Pin_8) || \ - ((PIN) == GPIO_Pin_9) || \ - ((PIN) == GPIO_Pin_10) || \ - ((PIN) == GPIO_Pin_11) || \ - ((PIN) == GPIO_Pin_12) || \ - ((PIN) == GPIO_Pin_13) || \ - ((PIN) == GPIO_Pin_14) || \ - ((PIN) == GPIO_Pin_15)) - -/* GPIO Remap define ---------------------------------------------------------*/ -#define GPIO_Remap_SPI1 ((u32)0x00000001) /* SPI1 Alternate Function mapping */ -#define GPIO_Remap_I2C1 ((u32)0x00000002) /* I2C1 Alternate Function mapping */ -#define GPIO_Remap_USART1 ((u32)0x00000004) /* USART1 Alternate Function mapping */ -#define GPIO_Remap_USART2 ((u32)0x00000008) /* USART2 Alternate Function mapping */ -#define GPIO_PartialRemap_USART3 ((u32)0x00140010) /* USART3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_USART3 ((u32)0x00140030) /* USART3 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM1 ((u32)0x00160040) /* TIM1 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM1 ((u32)0x001600C0) /* TIM1 Full Alternate Function mapping */ -#define GPIO_PartialRemap1_TIM2 ((u32)0x00180100) /* TIM2 Partial1 Alternate Function mapping */ -#define GPIO_PartialRemap2_TIM2 ((u32)0x00180200) /* TIM2 Partial2 Alternate Function mapping */ -#define GPIO_FullRemap_TIM2 ((u32)0x00180300) /* TIM2 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM3 ((u32)0x001A0800) /* TIM3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM3 ((u32)0x001A0C00) /* TIM3 Full Alternate Function mapping */ -#define GPIO_Remap_TIM4 ((u32)0x00001000) /* TIM4 Alternate Function mapping */ -#define GPIO_Remap1_CAN ((u32)0x001D4000) /* CAN Alternate Function mapping */ -#define GPIO_Remap2_CAN ((u32)0x001D6000) /* CAN Alternate Function mapping */ -#define GPIO_Remap_PD01 ((u32)0x00008000) /* PD01 Alternate Function mapping */ -#define GPIO_Remap_TIM5CH4_LSI ((u32)0x00200001) /* LSI connected to TIM5 Channel4 input capture for calibration */ -#define GPIO_Remap_ADC1_ETRGINJ ((u32)0x00200002) /* ADC1 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC1_ETRGREG ((u32)0x00200004) /* ADC1 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGINJ ((u32)0x00200008) /* ADC2 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGREG ((u32)0x00200010) /* ADC2 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_SWJ_NoJTRST ((u32)0x00300100) /* Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ -#define GPIO_Remap_SWJ_JTAGDisable ((u32)0x00300200) /* JTAG-DP Disabled and SW-DP Enabled */ -#define GPIO_Remap_SWJ_Disable ((u32)0x00300400) /* Full SWJ Disabled (JTAG-DP + SW-DP) */ - - -#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ - ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ - ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ - ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ - ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ - ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ - ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ - ((REMAP) == GPIO_Remap1_CAN) || ((REMAP) == GPIO_Remap2_CAN) || \ - ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ - ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ - ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ - ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable)|| \ - ((REMAP) == GPIO_Remap_SWJ_Disable)) - -/* GPIO Port Sources ---------------------------------------------------------*/ -#define GPIO_PortSourceGPIOA ((u8)0x00) -#define GPIO_PortSourceGPIOB ((u8)0x01) -#define GPIO_PortSourceGPIOC ((u8)0x02) -#define GPIO_PortSourceGPIOD ((u8)0x03) -#define GPIO_PortSourceGPIOE ((u8)0x04) -#define GPIO_PortSourceGPIOF ((u8)0x05) -#define GPIO_PortSourceGPIOG ((u8)0x06) - -#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE)) - -#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOG)) - -/* GPIO Pin sources ----------------------------------------------------------*/ -#define GPIO_PinSource0 ((u8)0x00) -#define GPIO_PinSource1 ((u8)0x01) -#define GPIO_PinSource2 ((u8)0x02) -#define GPIO_PinSource3 ((u8)0x03) -#define GPIO_PinSource4 ((u8)0x04) -#define GPIO_PinSource5 ((u8)0x05) -#define GPIO_PinSource6 ((u8)0x06) -#define GPIO_PinSource7 ((u8)0x07) -#define GPIO_PinSource8 ((u8)0x08) -#define GPIO_PinSource9 ((u8)0x09) -#define GPIO_PinSource10 ((u8)0x0A) -#define GPIO_PinSource11 ((u8)0x0B) -#define GPIO_PinSource12 ((u8)0x0C) -#define GPIO_PinSource13 ((u8)0x0D) -#define GPIO_PinSource14 ((u8)0x0E) -#define GPIO_PinSource15 ((u8)0x0F) - -#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ - ((PINSOURCE) == GPIO_PinSource1) || \ - ((PINSOURCE) == GPIO_PinSource2) || \ - ((PINSOURCE) == GPIO_PinSource3) || \ - ((PINSOURCE) == GPIO_PinSource4) || \ - ((PINSOURCE) == GPIO_PinSource5) || \ - ((PINSOURCE) == GPIO_PinSource6) || \ - ((PINSOURCE) == GPIO_PinSource7) || \ - ((PINSOURCE) == GPIO_PinSource8) || \ - ((PINSOURCE) == GPIO_PinSource9) || \ - ((PINSOURCE) == GPIO_PinSource10) || \ - ((PINSOURCE) == GPIO_PinSource11) || \ - ((PINSOURCE) == GPIO_PinSource12) || \ - ((PINSOURCE) == GPIO_PinSource13) || \ - ((PINSOURCE) == GPIO_PinSource14) || \ - ((PINSOURCE) == GPIO_PinSource15)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void GPIO_DeInit(GPIO_TypeDef* GPIOx); -void GPIO_AFIODeInit(void); -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); -u8 GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -u16 GPIO_ReadInputData(GPIO_TypeDef* GPIOx); -u8 GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -u16 GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); -void GPIO_SetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin, BitAction BitVal); -void GPIO_Write(GPIO_TypeDef* GPIOx, u16 PortVal); -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, u16 GPIO_Pin); -void GPIO_EventOutputConfig(u8 GPIO_PortSource, u8 GPIO_PinSource); -void GPIO_EventOutputCmd(FunctionalState NewState); -void GPIO_PinRemapConfig(u32 GPIO_Remap, FunctionalState NewState); -void GPIO_EXTILineConfig(u8 GPIO_PortSource, u8 GPIO_PinSource); - -#endif /* __STM32F10x_GPIO_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_i2c.h b/bsp/stm32/library/inc/stm32f10x_i2c.h deleted file mode 100644 index 52d196008..000000000 --- a/bsp/stm32/library/inc/stm32f10x_i2c.h +++ /dev/null @@ -1,285 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_i2c.h -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file contains all the functions prototypes for the -* I2C firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_I2C_H -#define __STM32F10x_I2C_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* I2C Init structure definition */ -typedef struct -{ - u16 I2C_Mode; - u16 I2C_DutyCycle; - u16 I2C_OwnAddress1; - u16 I2C_Ack; - u16 I2C_AcknowledgedAddress; - u32 I2C_ClockSpeed; -}I2C_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_I2C_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == I2C1_BASE) || \ - ((*(u32*)&(PERIPH)) == I2C2_BASE)) - -/* I2C modes */ -#define I2C_Mode_I2C ((u16)0x0000) -#define I2C_Mode_SMBusDevice ((u16)0x0002) -#define I2C_Mode_SMBusHost ((u16)0x000A) - -#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ - ((MODE) == I2C_Mode_SMBusDevice) || \ - ((MODE) == I2C_Mode_SMBusHost)) -/* I2C duty cycle in fast mode */ -#define I2C_DutyCycle_16_9 ((u16)0x4000) -#define I2C_DutyCycle_2 ((u16)0xBFFF) - -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ - ((CYCLE) == I2C_DutyCycle_2)) - -/* I2C cknowledgementy */ -#define I2C_Ack_Enable ((u16)0x0400) -#define I2C_Ack_Disable ((u16)0x0000) - -#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ - ((STATE) == I2C_Ack_Disable)) - -/* I2C transfer direction */ -#define I2C_Direction_Transmitter ((u8)0x00) -#define I2C_Direction_Receiver ((u8)0x01) - -#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ - ((DIRECTION) == I2C_Direction_Receiver)) - -/* I2C acknowledged address defines */ -#define I2C_AcknowledgedAddress_7bit ((u16)0x4000) -#define I2C_AcknowledgedAddress_10bit ((u16)0xC000) - -#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ - ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) - -/* I2C registers */ -#define I2C_Register_CR1 ((u8)0x00) -#define I2C_Register_CR2 ((u8)0x04) -#define I2C_Register_OAR1 ((u8)0x08) -#define I2C_Register_OAR2 ((u8)0x0C) -#define I2C_Register_DR ((u8)0x10) -#define I2C_Register_SR1 ((u8)0x14) -#define I2C_Register_SR2 ((u8)0x18) -#define I2C_Register_CCR ((u8)0x1C) -#define I2C_Register_TRISE ((u8)0x20) - -#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ - ((REGISTER) == I2C_Register_CR2) || \ - ((REGISTER) == I2C_Register_OAR1) || \ - ((REGISTER) == I2C_Register_OAR2) || \ - ((REGISTER) == I2C_Register_DR) || \ - ((REGISTER) == I2C_Register_SR1) || \ - ((REGISTER) == I2C_Register_SR2) || \ - ((REGISTER) == I2C_Register_CCR) || \ - ((REGISTER) == I2C_Register_TRISE)) - -/* I2C SMBus alert pin level */ -#define I2C_SMBusAlert_Low ((u16)0x2000) -#define I2C_SMBusAlert_High ((u16)0xDFFF) - -#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ - ((ALERT) == I2C_SMBusAlert_High)) - -/* I2C PEC position */ -#define I2C_PECPosition_Next ((u16)0x0800) -#define I2C_PECPosition_Current ((u16)0xF7FF) - -#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ - ((POSITION) == I2C_PECPosition_Current)) - -/* I2C interrupts definition */ -#define I2C_IT_BUF ((u16)0x0400) -#define I2C_IT_EVT ((u16)0x0200) -#define I2C_IT_ERR ((u16)0x0100) - -#define IS_I2C_CONFIG_IT(IT) ((((IT) & (u16)0xF8FF) == 0x00) && ((IT) != 0x00)) - -/* I2C interrupts definition */ -#define I2C_IT_SMBALERT ((u32)0x01008000) -#define I2C_IT_TIMEOUT ((u32)0x01004000) -#define I2C_IT_PECERR ((u32)0x01001000) -#define I2C_IT_OVR ((u32)0x01000800) -#define I2C_IT_AF ((u32)0x01000400) -#define I2C_IT_ARLO ((u32)0x01000200) -#define I2C_IT_BERR ((u32)0x01000100) -#define I2C_IT_TXE ((u32)0x06000080) -#define I2C_IT_RXNE ((u32)0x06000040) -#define I2C_IT_STOPF ((u32)0x02000010) -#define I2C_IT_ADD10 ((u32)0x02000008) -#define I2C_IT_BTF ((u32)0x02000004) -#define I2C_IT_ADDR ((u32)0x02000002) -#define I2C_IT_SB ((u32)0x02000001) - -#define IS_I2C_CLEAR_IT(IT) ((((IT) & (u16)0x20FF) == 0x00) && ((IT) != (u16)0x00)) - -#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ - ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ - ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ - ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ - ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ - ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ - ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) - -/* I2C flags definition */ -/* SR2 register flags */ -#define I2C_FLAG_DUALF ((u32)0x00800000) -#define I2C_FLAG_SMBHOST ((u32)0x00400000) -#define I2C_FLAG_SMBDEFAULT ((u32)0x00200000) -#define I2C_FLAG_GENCALL ((u32)0x00100000) -#define I2C_FLAG_TRA ((u32)0x00040000) -#define I2C_FLAG_BUSY ((u32)0x00020000) -#define I2C_FLAG_MSL ((u32)0x00010000) -/* SR1 register flags */ -#define I2C_FLAG_SMBALERT ((u32)0x10008000) -#define I2C_FLAG_TIMEOUT ((u32)0x10004000) -#define I2C_FLAG_PECERR ((u32)0x10001000) -#define I2C_FLAG_OVR ((u32)0x10000800) -#define I2C_FLAG_AF ((u32)0x10000400) -#define I2C_FLAG_ARLO ((u32)0x10000200) -#define I2C_FLAG_BERR ((u32)0x10000100) -#define I2C_FLAG_TXE ((u32)0x10000080) -#define I2C_FLAG_RXNE ((u32)0x10000040) -#define I2C_FLAG_STOPF ((u32)0x10000010) -#define I2C_FLAG_ADD10 ((u32)0x10000008) -#define I2C_FLAG_BTF ((u32)0x10000004) -#define I2C_FLAG_ADDR ((u32)0x10000002) -#define I2C_FLAG_SB ((u32)0x10000001) - -#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (u16)0x20FF) == 0x00) && ((FLAG) != (u16)0x00)) - -#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ - ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ - ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ - ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ - ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ - ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ - ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ - ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ - ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ - ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ - ((FLAG) == I2C_FLAG_SB)) - -/* I2C Events */ -/* EV1 */ -#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((u32)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ -#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((u32)0x00020002) /* BUSY and ADDR flags */ -#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((u32)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ -#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((u32)0x00820000) /* DUALF and BUSY flags */ -#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((u32)0x00120000) /* GENCALL and BUSY flags */ - -/* EV2 */ -#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((u32)0x00020040) /* BUSY and RXNE flags */ - -/* EV3 */ -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((u32)0x00060084) /* TRA, BUSY, TXE and BTF flags */ - -/* EV4 */ -#define I2C_EVENT_SLAVE_STOP_DETECTED ((u32)0x00000010) /* STOPF flag */ - -/* EV5 */ -#define I2C_EVENT_MASTER_MODE_SELECT ((u32)0x00030001) /* BUSY, MSL and SB flag */ - -/* EV6 */ -#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((u32)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ -#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((u32)0x00030002) /* BUSY, MSL and ADDR flags */ - -/* EV7 */ -#define I2C_EVENT_MASTER_BYTE_RECEIVED ((u32)0x00030040) /* BUSY, MSL and RXNE flags */ - -/* EV8 */ -#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((u32)0x00070080) /* TRA, BUSY, MSL, TXE flags */ - -/* EV8_2 */ -#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((u32)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ - -/* EV9 */ -#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((u32)0x00030008) /* BUSY, MSL and ADD10 flags */ - -/* EV3_2 */ -#define I2C_EVENT_SLAVE_ACK_FAILURE ((u32)0x00000400) /* AF flag */ - -#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ - ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ - ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) - -/* I2C own address1 -----------------------------------------------------------*/ -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) -/* I2C clock speed ------------------------------------------------------------*/ -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void I2C_DeInit(I2C_TypeDef* I2Cx); -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, u8 Address); -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_ITConfig(I2C_TypeDef* I2Cx, u16 I2C_IT, FunctionalState NewState); -void I2C_SendData(I2C_TypeDef* I2Cx, u8 Data); -u8 I2C_ReceiveData(I2C_TypeDef* I2Cx); -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 I2C_Direction); -u16 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register); -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, u16 I2C_SMBusAlert); -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, u16 I2C_PECPosition); -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -u8 I2C_GetPEC(I2C_TypeDef* I2Cx); -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, u16 I2C_DutyCycle); -u32 I2C_GetLastEvent(I2C_TypeDef* I2Cx); -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, u32 I2C_EVENT); -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u32 I2C_FLAG); -void I2C_ClearFlag(I2C_TypeDef* I2Cx, u32 I2C_FLAG); -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, u32 I2C_IT); -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, u32 I2C_IT); - -#endif /*__STM32F10x_I2C_H */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_iwdg.h b/bsp/stm32/library/inc/stm32f10x_iwdg.h deleted file mode 100644 index 97332f58c..000000000 --- a/bsp/stm32/library/inc/stm32f10x_iwdg.h +++ /dev/null @@ -1,69 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_iwdg.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* IWDG firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IWDG_H -#define __STM32F10x_IWDG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Write access to IWDG_PR and IWDG_RLR registers */ -#define IWDG_WriteAccess_Enable ((u16)0x5555) -#define IWDG_WriteAccess_Disable ((u16)0x0000) - -#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ - ((ACCESS) == IWDG_WriteAccess_Disable)) - -/* IWDG prescaler */ -#define IWDG_Prescaler_4 ((u8)0x00) -#define IWDG_Prescaler_8 ((u8)0x01) -#define IWDG_Prescaler_16 ((u8)0x02) -#define IWDG_Prescaler_32 ((u8)0x03) -#define IWDG_Prescaler_64 ((u8)0x04) -#define IWDG_Prescaler_128 ((u8)0x05) -#define IWDG_Prescaler_256 ((u8)0x06) - -#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ - ((PRESCALER) == IWDG_Prescaler_8) || \ - ((PRESCALER) == IWDG_Prescaler_16) || \ - ((PRESCALER) == IWDG_Prescaler_32) || \ - ((PRESCALER) == IWDG_Prescaler_64) || \ - ((PRESCALER) == IWDG_Prescaler_128)|| \ - ((PRESCALER) == IWDG_Prescaler_256)) - -/* IWDG Flag */ -#define IWDG_FLAG_PVU ((u16)0x0001) -#define IWDG_FLAG_RVU ((u16)0x0002) - -#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) - -#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void IWDG_WriteAccessCmd(u16 IWDG_WriteAccess); -void IWDG_SetPrescaler(u8 IWDG_Prescaler); -void IWDG_SetReload(u16 Reload); -void IWDG_ReloadCounter(void); -void IWDG_Enable(void); -FlagStatus IWDG_GetFlagStatus(u16 IWDG_FLAG); - -#endif /* __STM32F10x_IWDG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_lib.h b/bsp/stm32/library/inc/stm32f10x_lib.h deleted file mode 100644 index 77aa7274b..000000000 --- a/bsp/stm32/library/inc/stm32f10x_lib.h +++ /dev/null @@ -1,124 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_lib.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file includes the peripherals header files in the -* user application. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_LIB_H -#define __STM32F10x_LIB_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -#ifdef _ADC - #include "stm32f10x_adc.h" -#endif /*_ADC */ - -#ifdef _BKP - #include "stm32f10x_bkp.h" -#endif /*_BKP */ - -#ifdef _CAN - #include "stm32f10x_can.h" -#endif /*_CAN */ - -#ifdef _CRC - #include "stm32f10x_crc.h" -#endif /*_CRC */ - -#ifdef _DAC - #include "stm32f10x_dac.h" -#endif /*_DAC */ - -#ifdef _DBGMCU - #include "stm32f10x_dbgmcu.h" -#endif /*_DBGMCU */ - -#ifdef _DMA - #include "stm32f10x_dma.h" -#endif /*_DMA */ - -#ifdef _EXTI - #include "stm32f10x_exti.h" -#endif /*_EXTI */ - -#ifdef _FLASH - #include "stm32f10x_flash.h" -#endif /*_FLASH */ - -#ifdef _FSMC - #include "stm32f10x_fsmc.h" -#endif /*_FSMC */ - -#ifdef _GPIO - #include "stm32f10x_gpio.h" -#endif /*_GPIO */ - -#ifdef _I2C - #include "stm32f10x_i2c.h" -#endif /*_I2C */ - -#ifdef _IWDG - #include "stm32f10x_iwdg.h" -#endif /*_IWDG */ - -#ifdef _NVIC - #include "stm32f10x_nvic.h" -#endif /*_NVIC */ - -#ifdef _PWR - #include "stm32f10x_pwr.h" -#endif /*_PWR */ - -#ifdef _RCC - #include "stm32f10x_rcc.h" -#endif /*_RCC */ - -#ifdef _RTC - #include "stm32f10x_rtc.h" -#endif /*_RTC */ - -#ifdef _SDIO - #include "stm32f10x_sdio.h" -#endif /*_SDIO */ - -#ifdef _SPI - #include "stm32f10x_spi.h" -#endif /*_SPI */ - -#ifdef _SysTick - #include "stm32f10x_systick.h" -#endif /*_SysTick */ - -#ifdef _TIM - #include "stm32f10x_tim.h" -#endif /*_TIM */ - -#ifdef _USART - #include "stm32f10x_usart.h" -#endif /*_USART */ - -#ifdef _WWDG - #include "stm32f10x_wwdg.h" -#endif /*_WWDG */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void debug(void); - -#endif /* __STM32F10x_LIB_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_map.h b/bsp/stm32/library/inc/stm32f10x_map.h deleted file mode 100644 index 851dff410..000000000 --- a/bsp/stm32/library/inc/stm32f10x_map.h +++ /dev/null @@ -1,7603 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_map.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the peripheral register's definitions, -* bits definitions and memory mapping. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_MAP_H -#define __STM32F10x_MAP_H - -#ifndef EXT - #define EXT extern -#endif /* EXT */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_conf.h" -#include "stm32f10x_type.h" -#include "cortexm3_macro.h" - -/* Exported types ------------------------------------------------------------*/ -/******************************************************************************/ -/* Peripheral registers structures */ -/******************************************************************************/ - -/*------------------------ Analog to Digital Converter -----------------------*/ -typedef struct -{ - vu32 SR; - vu32 CR1; - vu32 CR2; - vu32 SMPR1; - vu32 SMPR2; - vu32 JOFR1; - vu32 JOFR2; - vu32 JOFR3; - vu32 JOFR4; - vu32 HTR; - vu32 LTR; - vu32 SQR1; - vu32 SQR2; - vu32 SQR3; - vu32 JSQR; - vu32 JDR1; - vu32 JDR2; - vu32 JDR3; - vu32 JDR4; - vu32 DR; -} ADC_TypeDef; - -/*------------------------ Backup Registers ----------------------------------*/ -typedef struct -{ - u32 RESERVED0; - vu16 DR1; - u16 RESERVED1; - vu16 DR2; - u16 RESERVED2; - vu16 DR3; - u16 RESERVED3; - vu16 DR4; - u16 RESERVED4; - vu16 DR5; - u16 RESERVED5; - vu16 DR6; - u16 RESERVED6; - vu16 DR7; - u16 RESERVED7; - vu16 DR8; - u16 RESERVED8; - vu16 DR9; - u16 RESERVED9; - vu16 DR10; - u16 RESERVED10; - vu16 RTCCR; - u16 RESERVED11; - vu16 CR; - u16 RESERVED12; - vu16 CSR; - u16 RESERVED13[5]; - vu16 DR11; - u16 RESERVED14; - vu16 DR12; - u16 RESERVED15; - vu16 DR13; - u16 RESERVED16; - vu16 DR14; - u16 RESERVED17; - vu16 DR15; - u16 RESERVED18; - vu16 DR16; - u16 RESERVED19; - vu16 DR17; - u16 RESERVED20; - vu16 DR18; - u16 RESERVED21; - vu16 DR19; - u16 RESERVED22; - vu16 DR20; - u16 RESERVED23; - vu16 DR21; - u16 RESERVED24; - vu16 DR22; - u16 RESERVED25; - vu16 DR23; - u16 RESERVED26; - vu16 DR24; - u16 RESERVED27; - vu16 DR25; - u16 RESERVED28; - vu16 DR26; - u16 RESERVED29; - vu16 DR27; - u16 RESERVED30; - vu16 DR28; - u16 RESERVED31; - vu16 DR29; - u16 RESERVED32; - vu16 DR30; - u16 RESERVED33; - vu16 DR31; - u16 RESERVED34; - vu16 DR32; - u16 RESERVED35; - vu16 DR33; - u16 RESERVED36; - vu16 DR34; - u16 RESERVED37; - vu16 DR35; - u16 RESERVED38; - vu16 DR36; - u16 RESERVED39; - vu16 DR37; - u16 RESERVED40; - vu16 DR38; - u16 RESERVED41; - vu16 DR39; - u16 RESERVED42; - vu16 DR40; - u16 RESERVED43; - vu16 DR41; - u16 RESERVED44; - vu16 DR42; - u16 RESERVED45; -} BKP_TypeDef; - -/*------------------------ Controller Area Network ---------------------------*/ -typedef struct -{ - vu32 TIR; - vu32 TDTR; - vu32 TDLR; - vu32 TDHR; -} CAN_TxMailBox_TypeDef; - -typedef struct -{ - vu32 RIR; - vu32 RDTR; - vu32 RDLR; - vu32 RDHR; -} CAN_FIFOMailBox_TypeDef; - -typedef struct -{ - vu32 FR1; - vu32 FR2; -} CAN_FilterRegister_TypeDef; - -typedef struct -{ - vu32 MCR; - vu32 MSR; - vu32 TSR; - vu32 RF0R; - vu32 RF1R; - vu32 IER; - vu32 ESR; - vu32 BTR; - u32 RESERVED0[88]; - CAN_TxMailBox_TypeDef sTxMailBox[3]; - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; - u32 RESERVED1[12]; - vu32 FMR; - vu32 FM1R; - u32 RESERVED2; - vu32 FS1R; - u32 RESERVED3; - vu32 FFA1R; - u32 RESERVED4; - vu32 FA1R; - u32 RESERVED5[8]; - CAN_FilterRegister_TypeDef sFilterRegister[14]; -} CAN_TypeDef; - -/*------------------------ CRC calculation unit ------------------------------*/ -typedef struct -{ - vu32 DR; - vu8 IDR; - u8 RESERVED0; - u16 RESERVED1; - vu32 CR; -} CRC_TypeDef; - - -/*------------------------ Digital to Analog Converter -----------------------*/ -typedef struct -{ - vu32 CR; - vu32 SWTRIGR; - vu32 DHR12R1; - vu32 DHR12L1; - vu32 DHR8R1; - vu32 DHR12R2; - vu32 DHR12L2; - vu32 DHR8R2; - vu32 DHR12RD; - vu32 DHR12LD; - vu32 DHR8RD; - vu32 DOR1; - vu32 DOR2; -} DAC_TypeDef; - -/*------------------------ Debug MCU -----------------------------------------*/ -typedef struct -{ - vu32 IDCODE; - vu32 CR; -}DBGMCU_TypeDef; - -/*------------------------ DMA Controller ------------------------------------*/ -typedef struct -{ - vu32 CCR; - vu32 CNDTR; - vu32 CPAR; - vu32 CMAR; -} DMA_Channel_TypeDef; - -typedef struct -{ - vu32 ISR; - vu32 IFCR; -} DMA_TypeDef; - -/*------------------------ External Interrupt/Event Controller ---------------*/ -typedef struct -{ - vu32 IMR; - vu32 EMR; - vu32 RTSR; - vu32 FTSR; - vu32 SWIER; - vu32 PR; -} EXTI_TypeDef; - -/*------------------------ FLASH and Option Bytes Registers ------------------*/ -typedef struct -{ - vu32 ACR; - vu32 KEYR; - vu32 OPTKEYR; - vu32 SR; - vu32 CR; - vu32 AR; - vu32 RESERVED; - vu32 OBR; - vu32 WRPR; -} FLASH_TypeDef; - -typedef struct -{ - vu16 RDP; - vu16 USER; - vu16 Data0; - vu16 Data1; - vu16 WRP0; - vu16 WRP1; - vu16 WRP2; - vu16 WRP3; -} OB_TypeDef; - -/*------------------------ Flexible Static Memory Controller -----------------*/ -typedef struct -{ - vu32 BTCR[8]; -} FSMC_Bank1_TypeDef; - -typedef struct -{ - vu32 BWTR[7]; -} FSMC_Bank1E_TypeDef; - -typedef struct -{ - vu32 PCR2; - vu32 SR2; - vu32 PMEM2; - vu32 PATT2; - u32 RESERVED0; - vu32 ECCR2; -} FSMC_Bank2_TypeDef; - -typedef struct -{ - vu32 PCR3; - vu32 SR3; - vu32 PMEM3; - vu32 PATT3; - u32 RESERVED0; - vu32 ECCR3; -} FSMC_Bank3_TypeDef; - -typedef struct -{ - vu32 PCR4; - vu32 SR4; - vu32 PMEM4; - vu32 PATT4; - vu32 PIO4; -} FSMC_Bank4_TypeDef; - -/*------------------------ General Purpose and Alternate Function IO ---------*/ -typedef struct -{ - vu32 CRL; - vu32 CRH; - vu32 IDR; - vu32 ODR; - vu32 BSRR; - vu32 BRR; - vu32 LCKR; -} GPIO_TypeDef; - -typedef struct -{ - vu32 EVCR; - vu32 MAPR; - vu32 EXTICR[4]; -} AFIO_TypeDef; - -/*------------------------ Inter-integrated Circuit Interface ----------------*/ -typedef struct -{ - vu16 CR1; - u16 RESERVED0; - vu16 CR2; - u16 RESERVED1; - vu16 OAR1; - u16 RESERVED2; - vu16 OAR2; - u16 RESERVED3; - vu16 DR; - u16 RESERVED4; - vu16 SR1; - u16 RESERVED5; - vu16 SR2; - u16 RESERVED6; - vu16 CCR; - u16 RESERVED7; - vu16 TRISE; - u16 RESERVED8; -} I2C_TypeDef; - -/*------------------------ Independent WATCHDOG ------------------------------*/ -typedef struct -{ - vu32 KR; - vu32 PR; - vu32 RLR; - vu32 SR; -} IWDG_TypeDef; - -/*------------------------ Nested Vectored Interrupt Controller --------------*/ -typedef struct -{ - vu32 ISER[2]; - u32 RESERVED0[30]; - vu32 ICER[2]; - u32 RSERVED1[30]; - vu32 ISPR[2]; - u32 RESERVED2[30]; - vu32 ICPR[2]; - u32 RESERVED3[30]; - vu32 IABR[2]; - u32 RESERVED4[62]; - vu32 IPR[15]; -} NVIC_TypeDef; - -typedef struct -{ - vuc32 CPUID; - vu32 ICSR; - vu32 VTOR; - vu32 AIRCR; - vu32 SCR; - vu32 CCR; - vu32 SHPR[3]; - vu32 SHCSR; - vu32 CFSR; - vu32 HFSR; - vu32 DFSR; - vu32 MMFAR; - vu32 BFAR; - vu32 AFSR; -} SCB_TypeDef; - -/*------------------------ Power Control -------------------------------------*/ -typedef struct -{ - vu32 CR; - vu32 CSR; -} PWR_TypeDef; - -/*------------------------ Reset and Clock Control ---------------------------*/ -typedef struct -{ - vu32 CR; - vu32 CFGR; - vu32 CIR; - vu32 APB2RSTR; - vu32 APB1RSTR; - vu32 AHBENR; - vu32 APB2ENR; - vu32 APB1ENR; - vu32 BDCR; - vu32 CSR; -} RCC_TypeDef; - -/*------------------------ Real-Time Clock -----------------------------------*/ -typedef struct -{ - vu16 CRH; - u16 RESERVED0; - vu16 CRL; - u16 RESERVED1; - vu16 PRLH; - u16 RESERVED2; - vu16 PRLL; - u16 RESERVED3; - vu16 DIVH; - u16 RESERVED4; - vu16 DIVL; - u16 RESERVED5; - vu16 CNTH; - u16 RESERVED6; - vu16 CNTL; - u16 RESERVED7; - vu16 ALRH; - u16 RESERVED8; - vu16 ALRL; - u16 RESERVED9; -} RTC_TypeDef; - -/*------------------------ SD host Interface ---------------------------------*/ -typedef struct -{ - vu32 POWER; - vu32 CLKCR; - vu32 ARG; - vu32 CMD; - vuc32 RESPCMD; - vuc32 RESP1; - vuc32 RESP2; - vuc32 RESP3; - vuc32 RESP4; - vu32 DTIMER; - vu32 DLEN; - vu32 DCTRL; - vuc32 DCOUNT; - vuc32 STA; - vu32 ICR; - vu32 MASK; - u32 RESERVED0[2]; - vuc32 FIFOCNT; - u32 RESERVED1[13]; - vu32 FIFO; -} SDIO_TypeDef; - -/*------------------------ Serial Peripheral Interface -----------------------*/ -typedef struct -{ - vu16 CR1; - u16 RESERVED0; - vu16 CR2; - u16 RESERVED1; - vu16 SR; - u16 RESERVED2; - vu16 DR; - u16 RESERVED3; - vu16 CRCPR; - u16 RESERVED4; - vu16 RXCRCR; - u16 RESERVED5; - vu16 TXCRCR; - u16 RESERVED6; - vu16 I2SCFGR; - u16 RESERVED7; - vu16 I2SPR; - u16 RESERVED8; -} SPI_TypeDef; - -/*------------------------ SystemTick ----------------------------------------*/ -typedef struct -{ - vu32 CTRL; - vu32 LOAD; - vu32 VAL; - vuc32 CALIB; -} SysTick_TypeDef; - -/*------------------------ TIM -----------------------------------------------*/ -typedef struct -{ - vu16 CR1; - u16 RESERVED0; - vu16 CR2; - u16 RESERVED1; - vu16 SMCR; - u16 RESERVED2; - vu16 DIER; - u16 RESERVED3; - vu16 SR; - u16 RESERVED4; - vu16 EGR; - u16 RESERVED5; - vu16 CCMR1; - u16 RESERVED6; - vu16 CCMR2; - u16 RESERVED7; - vu16 CCER; - u16 RESERVED8; - vu16 CNT; - u16 RESERVED9; - vu16 PSC; - u16 RESERVED10; - vu16 ARR; - u16 RESERVED11; - vu16 RCR; - u16 RESERVED12; - vu16 CCR1; - u16 RESERVED13; - vu16 CCR2; - u16 RESERVED14; - vu16 CCR3; - u16 RESERVED15; - vu16 CCR4; - u16 RESERVED16; - vu16 BDTR; - u16 RESERVED17; - vu16 DCR; - u16 RESERVED18; - vu16 DMAR; - u16 RESERVED19; -} TIM_TypeDef; - -/*----------------- Universal Synchronous Asynchronous Receiver Transmitter --*/ -typedef struct -{ - vu16 SR; - u16 RESERVED0; - vu16 DR; - u16 RESERVED1; - vu16 BRR; - u16 RESERVED2; - vu16 CR1; - u16 RESERVED3; - vu16 CR2; - u16 RESERVED4; - vu16 CR3; - u16 RESERVED5; - vu16 GTPR; - u16 RESERVED6; -} USART_TypeDef; - -/*------------------------ Window WATCHDOG -----------------------------------*/ -typedef struct -{ - vu32 CR; - vu32 CFR; - vu32 SR; -} WWDG_TypeDef; - -/******************************************************************************/ -/* Peripheral memory map */ -/******************************************************************************/ -/* Peripheral and SRAM base address in the alias region */ -#define PERIPH_BB_BASE ((u32)0x42000000) -#define SRAM_BB_BASE ((u32)0x22000000) - -/* Peripheral and SRAM base address in the bit-band region */ -#define SRAM_BASE ((u32)0x20000000) -#define PERIPH_BASE ((u32)0x40000000) - -/* FSMC registers base address */ -#define FSMC_R_BASE ((u32)0xA0000000) - -/* Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) - -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) -#define CAN_BASE (APB1PERIPH_BASE + 0x6400) -#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400) - -#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) -#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) -#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800) -#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) - -#define SDIO_BASE (PERIPH_BASE + 0x18000) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) -#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) -#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) -#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) -#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) -#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) -#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) -#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) -#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) -#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) -#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) -#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) -#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) -#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -#define CRC_BASE (AHBPERIPH_BASE + 0x3000) - -/* Flash registers base address */ -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) -/* Flash Option Bytes base address */ -#define OB_BASE ((u32)0x1FFFF800) - -/* FSMC Bankx registers base address */ -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) -#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) -#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) - -/* Debug MCU registers base address */ -#define DBGMCU_BASE ((u32)0xE0042000) - -/* System Control Space memory map */ -#define SCS_BASE ((u32)0xE000E000) - -#define SysTick_BASE (SCS_BASE + 0x0010) -#define NVIC_BASE (SCS_BASE + 0x0100) -#define SCB_BASE (SCS_BASE + 0x0D00) - -/******************************************************************************/ -/* Peripheral declaration */ -/******************************************************************************/ - -/*------------------------ Non Debug Mode ------------------------------------*/ -#ifndef DEBUG -#ifdef _TIM2 - #define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#endif /*_TIM2 */ - -#ifdef _TIM3 - #define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#endif /*_TIM3 */ - -#ifdef _TIM4 - #define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#endif /*_TIM4 */ - -#ifdef _TIM5 - #define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#endif /*_TIM5 */ - -#ifdef _TIM6 - #define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#endif /*_TIM6 */ - -#ifdef _TIM7 - #define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#endif /*_TIM7 */ - -#ifdef _RTC - #define RTC ((RTC_TypeDef *) RTC_BASE) -#endif /*_RTC */ - -#ifdef _WWDG - #define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#endif /*_WWDG */ - -#ifdef _IWDG - #define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#endif /*_IWDG */ - -#ifdef _SPI2 - #define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#endif /*_SPI2 */ - -#ifdef _SPI3 - #define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#endif /*_SPI3 */ - -#ifdef _USART2 - #define USART2 ((USART_TypeDef *) USART2_BASE) -#endif /*_USART2 */ - -#ifdef _USART3 - #define USART3 ((USART_TypeDef *) USART3_BASE) -#endif /*_USART3 */ - -#ifdef _UART4 - #define UART4 ((USART_TypeDef *) UART4_BASE) -#endif /*_UART4 */ - -#ifdef _UART5 - #define UART5 ((USART_TypeDef *) UART5_BASE) -#endif /*_USART5 */ - -#ifdef _I2C1 - #define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#endif /*_I2C1 */ - -#ifdef _I2C2 - #define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#endif /*_I2C2 */ - -#ifdef _CAN - #define CAN ((CAN_TypeDef *) CAN_BASE) -#endif /*_CAN */ - -#ifdef _BKP - #define BKP ((BKP_TypeDef *) BKP_BASE) -#endif /*_BKP */ - -#ifdef _PWR - #define PWR ((PWR_TypeDef *) PWR_BASE) -#endif /*_PWR */ - -#ifdef _DAC - #define DAC ((DAC_TypeDef *) DAC_BASE) -#endif /*_DAC */ - -#ifdef _AFIO - #define AFIO ((AFIO_TypeDef *) AFIO_BASE) -#endif /*_AFIO */ - -#ifdef _EXTI - #define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#endif /*_EXTI */ - -#ifdef _GPIOA - #define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#endif /*_GPIOA */ - -#ifdef _GPIOB - #define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#endif /*_GPIOB */ - -#ifdef _GPIOC - #define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#endif /*_GPIOC */ - -#ifdef _GPIOD - #define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#endif /*_GPIOD */ - -#ifdef _GPIOE - #define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#endif /*_GPIOE */ - -#ifdef _GPIOF - #define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#endif /*_GPIOF */ - -#ifdef _GPIOG - #define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#endif /*_GPIOG */ - -#ifdef _ADC1 - #define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#endif /*_ADC1 */ - -#ifdef _ADC2 - #define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#endif /*_ADC2 */ - -#ifdef _TIM1 - #define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#endif /*_TIM1 */ - -#ifdef _SPI1 - #define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#endif /*_SPI1 */ - -#ifdef _TIM8 - #define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#endif /*_TIM8 */ - -#ifdef _USART1 - #define USART1 ((USART_TypeDef *) USART1_BASE) -#endif /*_USART1 */ - -#ifdef _ADC3 - #define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#endif /*_ADC3 */ - -#ifdef _SDIO - #define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#endif /*_SDIO */ - -#ifdef _DMA - #define DMA1 ((DMA_TypeDef *) DMA1_BASE) - #define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#endif /*_DMA */ - -#ifdef _DMA1_Channel1 - #define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#endif /*_DMA1_Channel1 */ - -#ifdef _DMA1_Channel2 - #define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#endif /*_DMA1_Channel2 */ - -#ifdef _DMA1_Channel3 - #define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#endif /*_DMA1_Channel3 */ - -#ifdef _DMA1_Channel4 - #define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#endif /*_DMA1_Channel4 */ - -#ifdef _DMA1_Channel5 - #define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#endif /*_DMA1_Channel5 */ - -#ifdef _DMA1_Channel6 - #define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#endif /*_DMA1_Channel6 */ - -#ifdef _DMA1_Channel7 - #define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#endif /*_DMA1_Channel7 */ - -#ifdef _DMA2_Channel1 - #define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) -#endif /*_DMA2_Channel1 */ - -#ifdef _DMA2_Channel2 - #define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) -#endif /*_DMA2_Channel2 */ - -#ifdef _DMA2_Channel3 - #define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) -#endif /*_DMA2_Channel3 */ - -#ifdef _DMA2_Channel4 - #define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) -#endif /*_DMA2_Channel4 */ - -#ifdef _DMA2_Channel5 - #define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) -#endif /*_DMA2_Channel5 */ - -#ifdef _RCC - #define RCC ((RCC_TypeDef *) RCC_BASE) -#endif /*_RCC */ - -#ifdef _CRC - #define CRC ((CRC_TypeDef *) CRC_BASE) -#endif /*_CRC */ - -#ifdef _FLASH - #define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) - #define OB ((OB_TypeDef *) OB_BASE) -#endif /*_FLASH */ - -#ifdef _FSMC - #define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) - #define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) - #define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) - #define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) - #define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#endif /*_FSMC */ - -#ifdef _DBGMCU - #define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) -#endif /*_DBGMCU */ - -#ifdef _SysTick - #define SysTick ((SysTick_TypeDef *) SysTick_BASE) -#endif /*_SysTick */ - -#ifdef _NVIC - #define NVIC ((NVIC_TypeDef *) NVIC_BASE) - #define SCB ((SCB_TypeDef *) SCB_BASE) -#endif /*_NVIC */ - -/*------------------------ Debug Mode ----------------------------------------*/ -#else /* DEBUG */ -#ifdef _TIM2 - EXT TIM_TypeDef *TIM2; -#endif /*_TIM2 */ - -#ifdef _TIM3 - EXT TIM_TypeDef *TIM3; -#endif /*_TIM3 */ - -#ifdef _TIM4 - EXT TIM_TypeDef *TIM4; -#endif /*_TIM4 */ - -#ifdef _TIM5 - EXT TIM_TypeDef *TIM5; -#endif /*_TIM5 */ - -#ifdef _TIM6 - EXT TIM_TypeDef *TIM6; -#endif /*_TIM6 */ - -#ifdef _TIM7 - EXT TIM_TypeDef *TIM7; -#endif /*_TIM7 */ - -#ifdef _RTC - EXT RTC_TypeDef *RTC; -#endif /*_RTC */ - -#ifdef _WWDG - EXT WWDG_TypeDef *WWDG; -#endif /*_WWDG */ - -#ifdef _IWDG - EXT IWDG_TypeDef *IWDG; -#endif /*_IWDG */ - -#ifdef _SPI2 - EXT SPI_TypeDef *SPI2; -#endif /*_SPI2 */ - -#ifdef _SPI3 - EXT SPI_TypeDef *SPI3; -#endif /*_SPI3 */ - -#ifdef _USART2 - EXT USART_TypeDef *USART2; -#endif /*_USART2 */ - -#ifdef _USART3 - EXT USART_TypeDef *USART3; -#endif /*_USART3 */ - -#ifdef _UART4 - EXT USART_TypeDef *UART4; -#endif /*_UART4 */ - -#ifdef _UART5 - EXT USART_TypeDef *UART5; -#endif /*_UART5 */ - -#ifdef _I2C1 - EXT I2C_TypeDef *I2C1; -#endif /*_I2C1 */ - -#ifdef _I2C2 - EXT I2C_TypeDef *I2C2; -#endif /*_I2C2 */ - -#ifdef _CAN - EXT CAN_TypeDef *CAN; -#endif /*_CAN */ - -#ifdef _BKP - EXT BKP_TypeDef *BKP; -#endif /*_BKP */ - -#ifdef _PWR - EXT PWR_TypeDef *PWR; -#endif /*_PWR */ - -#ifdef _DAC - EXT DAC_TypeDef *DAC; -#endif /*_DAC */ - -#ifdef _AFIO - EXT AFIO_TypeDef *AFIO; -#endif /*_AFIO */ - -#ifdef _EXTI - EXT EXTI_TypeDef *EXTI; -#endif /*_EXTI */ - -#ifdef _GPIOA - EXT GPIO_TypeDef *GPIOA; -#endif /*_GPIOA */ - -#ifdef _GPIOB - EXT GPIO_TypeDef *GPIOB; -#endif /*_GPIOB */ - -#ifdef _GPIOC - EXT GPIO_TypeDef *GPIOC; -#endif /*_GPIOC */ - -#ifdef _GPIOD - EXT GPIO_TypeDef *GPIOD; -#endif /*_GPIOD */ - -#ifdef _GPIOE - EXT GPIO_TypeDef *GPIOE; -#endif /*_GPIOE */ - -#ifdef _GPIOF - EXT GPIO_TypeDef *GPIOF; -#endif /*_GPIOF */ - -#ifdef _GPIOG - EXT GPIO_TypeDef *GPIOG; -#endif /*_GPIOG */ - -#ifdef _ADC1 - EXT ADC_TypeDef *ADC1; -#endif /*_ADC1 */ - -#ifdef _ADC2 - EXT ADC_TypeDef *ADC2; -#endif /*_ADC2 */ - -#ifdef _TIM1 - EXT TIM_TypeDef *TIM1; -#endif /*_TIM1 */ - -#ifdef _SPI1 - EXT SPI_TypeDef *SPI1; -#endif /*_SPI1 */ - -#ifdef _TIM8 - EXT TIM_TypeDef *TIM8; -#endif /*_TIM8 */ - -#ifdef _USART1 - EXT USART_TypeDef *USART1; -#endif /*_USART1 */ - -#ifdef _ADC3 - EXT ADC_TypeDef *ADC3; -#endif /*_ADC3 */ - -#ifdef _SDIO - EXT SDIO_TypeDef *SDIO; -#endif /*_SDIO */ - -#ifdef _DMA - EXT DMA_TypeDef *DMA1; - EXT DMA_TypeDef *DMA2; -#endif /*_DMA */ - -#ifdef _DMA1_Channel1 - EXT DMA_Channel_TypeDef *DMA1_Channel1; -#endif /*_DMA1_Channel1 */ - -#ifdef _DMA1_Channel2 - EXT DMA_Channel_TypeDef *DMA1_Channel2; -#endif /*_DMA1_Channel2 */ - -#ifdef _DMA1_Channel3 - EXT DMA_Channel_TypeDef *DMA1_Channel3; -#endif /*_DMA1_Channel3 */ - -#ifdef _DMA1_Channel4 - EXT DMA_Channel_TypeDef *DMA1_Channel4; -#endif /*_DMA1_Channel4 */ - -#ifdef _DMA1_Channel5 - EXT DMA_Channel_TypeDef *DMA1_Channel5; -#endif /*_DMA1_Channel5 */ - -#ifdef _DMA1_Channel6 - EXT DMA_Channel_TypeDef *DMA1_Channel6; -#endif /*_DMA1_Channel6 */ - -#ifdef _DMA1_Channel7 - EXT DMA_Channel_TypeDef *DMA1_Channel7; -#endif /*_DMA1_Channel7 */ - -#ifdef _DMA2_Channel1 - EXT DMA_Channel_TypeDef *DMA2_Channel1; -#endif /*_DMA2_Channel1 */ - -#ifdef _DMA2_Channel2 - EXT DMA_Channel_TypeDef *DMA2_Channel2; -#endif /*_DMA2_Channel2 */ - -#ifdef _DMA2_Channel3 - EXT DMA_Channel_TypeDef *DMA2_Channel3; -#endif /*_DMA2_Channel3 */ - -#ifdef _DMA2_Channel4 - EXT DMA_Channel_TypeDef *DMA2_Channel4; -#endif /*_DMA2_Channel4 */ - -#ifdef _DMA2_Channel5 - EXT DMA_Channel_TypeDef *DMA2_Channel5; -#endif /*_DMA2_Channel5 */ - -#ifdef _RCC - EXT RCC_TypeDef *RCC; -#endif /*_RCC */ - -#ifdef _CRC - EXT CRC_TypeDef *CRC; -#endif /*_CRC */ - -#ifdef _FLASH - EXT FLASH_TypeDef *FLASH; - EXT OB_TypeDef *OB; -#endif /*_FLASH */ - -#ifdef _FSMC - EXT FSMC_Bank1_TypeDef *FSMC_Bank1; - EXT FSMC_Bank1E_TypeDef *FSMC_Bank1E; - EXT FSMC_Bank2_TypeDef *FSMC_Bank2; - EXT FSMC_Bank3_TypeDef *FSMC_Bank3; - EXT FSMC_Bank4_TypeDef *FSMC_Bank4; -#endif /*_FSMC */ - -#ifdef _DBGMCU - EXT DBGMCU_TypeDef *DBGMCU; -#endif /*_DBGMCU */ - -#ifdef _SysTick - EXT SysTick_TypeDef *SysTick; -#endif /*_SysTick */ - -#ifdef _NVIC - EXT NVIC_TypeDef *NVIC; - EXT SCB_TypeDef *SCB; -#endif /*_NVIC */ - -#endif /* DEBUG */ - -/* Exported constants --------------------------------------------------------*/ -/******************************************************************************/ -/* */ -/* CRC calculation unit */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for CRC_DR register *********************/ -#define CRC_DR_DR ((u32)0xFFFFFFFF) /* Data register bits */ - - -/******************* Bit definition for CRC_IDR register ********************/ -#define CRC_IDR_IDR ((u8)0xFF) /* General-purpose 8-bit data register bits */ - - -/******************** Bit definition for CRC_CR register ********************/ -#define CRC_CR_RESET ((u8)0x01) /* RESET bit */ - - - -/******************************************************************************/ -/* */ -/* Power Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for PWR_CR register ********************/ -#define PWR_CR_LPDS ((u16)0x0001) /* Low-Power Deepsleep */ -#define PWR_CR_PDDS ((u16)0x0002) /* Power Down Deepsleep */ -#define PWR_CR_CWUF ((u16)0x0004) /* Clear Wakeup Flag */ -#define PWR_CR_CSBF ((u16)0x0008) /* Clear Standby Flag */ -#define PWR_CR_PVDE ((u16)0x0010) /* Power Voltage Detector Enable */ - -#define PWR_CR_PLS ((u16)0x00E0) /* PLS[2:0] bits (PVD Level Selection) */ -#define PWR_CR_PLS_0 ((u16)0x0020) /* Bit 0 */ -#define PWR_CR_PLS_1 ((u16)0x0040) /* Bit 1 */ -#define PWR_CR_PLS_2 ((u16)0x0080) /* Bit 2 */ - -/* PVD level configuration */ -#define PWR_CR_PLS_2V2 ((u16)0x0000) /* PVD level 2.2V */ -#define PWR_CR_PLS_2V3 ((u16)0x0020) /* PVD level 2.3V */ -#define PWR_CR_PLS_2V4 ((u16)0x0040) /* PVD level 2.4V */ -#define PWR_CR_PLS_2V5 ((u16)0x0060) /* PVD level 2.5V */ -#define PWR_CR_PLS_2V6 ((u16)0x0080) /* PVD level 2.6V */ -#define PWR_CR_PLS_2V7 ((u16)0x00A0) /* PVD level 2.7V */ -#define PWR_CR_PLS_2V8 ((u16)0x00C0) /* PVD level 2.8V */ -#define PWR_CR_PLS_2V9 ((u16)0x00E0) /* PVD level 2.9V */ - -#define PWR_CR_DBP ((u16)0x0100) /* Disable Backup Domain write protection */ - - -/******************* Bit definition for PWR_CSR register ********************/ -#define PWR_CSR_WUF ((u16)0x0001) /* Wakeup Flag */ -#define PWR_CSR_SBF ((u16)0x0002) /* Standby Flag */ -#define PWR_CSR_PVDO ((u16)0x0004) /* PVD Output */ -#define PWR_CSR_EWUP ((u16)0x0100) /* Enable WKUP pin */ - - - -/******************************************************************************/ -/* */ -/* Backup registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for BKP_DR1 register ********************/ -#define BKP_DR1_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR2 register ********************/ -#define BKP_DR2_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR3 register ********************/ -#define BKP_DR3_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR4 register ********************/ -#define BKP_DR4_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR5 register ********************/ -#define BKP_DR5_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR6 register ********************/ -#define BKP_DR6_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR7 register ********************/ -#define BKP_DR7_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR8 register ********************/ -#define BKP_DR8_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR9 register ********************/ -#define BKP_DR9_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR10 register *******************/ -#define BKP_DR10_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR11 register *******************/ -#define BKP_DR11_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR12 register *******************/ -#define BKP_DR12_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR13 register *******************/ -#define BKP_DR13_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR14 register *******************/ -#define BKP_DR14_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR15 register *******************/ -#define BKP_DR15_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR16 register *******************/ -#define BKP_DR16_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR17 register *******************/ -#define BKP_DR17_D ((u16)0xFFFF) /* Backup data */ - - -/****************** Bit definition for BKP_DR18 register ********************/ -#define BKP_DR18_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR19 register *******************/ -#define BKP_DR19_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR20 register *******************/ -#define BKP_DR20_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR21 register *******************/ -#define BKP_DR21_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR22 register *******************/ -#define BKP_DR22_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR23 register *******************/ -#define BKP_DR23_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR24 register *******************/ -#define BKP_DR24_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR25 register *******************/ -#define BKP_DR25_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR26 register *******************/ -#define BKP_DR26_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR27 register *******************/ -#define BKP_DR27_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR28 register *******************/ -#define BKP_DR28_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR29 register *******************/ -#define BKP_DR29_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR30 register *******************/ -#define BKP_DR30_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR31 register *******************/ -#define BKP_DR31_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR32 register *******************/ -#define BKP_DR32_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR33 register *******************/ -#define BKP_DR33_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR34 register *******************/ -#define BKP_DR34_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR35 register *******************/ -#define BKP_DR35_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR36 register *******************/ -#define BKP_DR36_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR37 register *******************/ -#define BKP_DR37_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR38 register *******************/ -#define BKP_DR38_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR39 register *******************/ -#define BKP_DR39_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR40 register *******************/ -#define BKP_DR40_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR41 register *******************/ -#define BKP_DR41_D ((u16)0xFFFF) /* Backup data */ - - -/******************* Bit definition for BKP_DR42 register *******************/ -#define BKP_DR42_D ((u16)0xFFFF) /* Backup data */ - - -/****************** Bit definition for BKP_RTCCR register *******************/ -#define BKP_RTCCR_CAL ((u16)0x007F) /* Calibration value */ -#define BKP_RTCCR_CCO ((u16)0x0080) /* Calibration Clock Output */ -#define BKP_RTCCR_ASOE ((u16)0x0100) /* Alarm or Second Output Enable */ -#define BKP_RTCCR_ASOS ((u16)0x0200) /* Alarm or Second Output Selection */ - - -/******************** Bit definition for BKP_CR register ********************/ -#define BKP_CR_TPE ((u8)0x01) /* TAMPER pin enable */ -#define BKP_CR_TPAL ((u8)0x02) /* TAMPER pin active level */ - - -/******************* Bit definition for BKP_CSR register ********************/ -#define BKP_CSR_CTE ((u16)0x0001) /* Clear Tamper event */ -#define BKP_CSR_CTI ((u16)0x0002) /* Clear Tamper Interrupt */ -#define BKP_CSR_TPIE ((u16)0x0004) /* TAMPER Pin interrupt enable */ -#define BKP_CSR_TEF ((u16)0x0100) /* Tamper Event Flag */ -#define BKP_CSR_TIF ((u16)0x0200) /* Tamper Interrupt Flag */ - - - -/******************************************************************************/ -/* */ -/* Reset and Clock Control */ -/* */ -/******************************************************************************/ - - -/******************** Bit definition for RCC_CR register ********************/ -#define RCC_CR_HSION ((u32)0x00000001) /* Internal High Speed clock enable */ -#define RCC_CR_HSIRDY ((u32)0x00000002) /* Internal High Speed clock ready flag */ -#define RCC_CR_HSITRIM ((u32)0x000000F8) /* Internal High Speed clock trimming */ -#define RCC_CR_HSICAL ((u32)0x0000FF00) /* Internal High Speed clock Calibration */ -#define RCC_CR_HSEON ((u32)0x00010000) /* External High Speed clock enable */ -#define RCC_CR_HSERDY ((u32)0x00020000) /* External High Speed clock ready flag */ -#define RCC_CR_HSEBYP ((u32)0x00040000) /* External High Speed clock Bypass */ -#define RCC_CR_CSSON ((u32)0x00080000) /* Clock Security System enable */ -#define RCC_CR_PLLON ((u32)0x01000000) /* PLL enable */ -#define RCC_CR_PLLRDY ((u32)0x02000000) /* PLL clock ready flag */ - - -/******************* Bit definition for RCC_CFGR register *******************/ -#define RCC_CFGR_SW ((u32)0x00000003) /* SW[1:0] bits (System clock Switch) */ -#define RCC_CFGR_SW_0 ((u32)0x00000001) /* Bit 0 */ -#define RCC_CFGR_SW_1 ((u32)0x00000002) /* Bit 1 */ - -/* SW configuration */ -#define RCC_CFGR_SW_HSI ((u32)0x00000000) /* HSI selected as system clock */ -#define RCC_CFGR_SW_HSE ((u32)0x00000001) /* HSE selected as system clock */ -#define RCC_CFGR_SW_PLL ((u32)0x00000002) /* PLL selected as system clock */ - -#define RCC_CFGR_SWS ((u32)0x0000000C) /* SWS[1:0] bits (System Clock Switch Status) */ -#define RCC_CFGR_SWS_0 ((u32)0x00000004) /* Bit 0 */ -#define RCC_CFGR_SWS_1 ((u32)0x00000008) /* Bit 1 */ - -/* SWS configuration */ -#define RCC_CFGR_SWS_HSI ((u32)0x00000000) /* HSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSE ((u32)0x00000004) /* HSE oscillator used as system clock */ -#define RCC_CFGR_SWS_PLL ((u32)0x00000008) /* PLL used as system clock */ - -#define RCC_CFGR_HPRE ((u32)0x000000F0) /* HPRE[3:0] bits (AHB prescaler) */ -#define RCC_CFGR_HPRE_0 ((u32)0x00000010) /* Bit 0 */ -#define RCC_CFGR_HPRE_1 ((u32)0x00000020) /* Bit 1 */ -#define RCC_CFGR_HPRE_2 ((u32)0x00000040) /* Bit 2 */ -#define RCC_CFGR_HPRE_3 ((u32)0x00000080) /* Bit 3 */ - -/* HPRE configuration */ -#define RCC_CFGR_HPRE_DIV1 ((u32)0x00000000) /* SYSCLK not divided */ -#define RCC_CFGR_HPRE_DIV2 ((u32)0x00000080) /* SYSCLK divided by 2 */ -#define RCC_CFGR_HPRE_DIV4 ((u32)0x00000090) /* SYSCLK divided by 4 */ -#define RCC_CFGR_HPRE_DIV8 ((u32)0x000000A0) /* SYSCLK divided by 8 */ -#define RCC_CFGR_HPRE_DIV16 ((u32)0x000000B0) /* SYSCLK divided by 16 */ -#define RCC_CFGR_HPRE_DIV64 ((u32)0x000000C0) /* SYSCLK divided by 64 */ -#define RCC_CFGR_HPRE_DIV128 ((u32)0x000000D0) /* SYSCLK divided by 128 */ -#define RCC_CFGR_HPRE_DIV256 ((u32)0x000000E0) /* SYSCLK divided by 256 */ -#define RCC_CFGR_HPRE_DIV512 ((u32)0x000000F0) /* SYSCLK divided by 512 */ - -#define RCC_CFGR_PPRE1 ((u32)0x00000700) /* PRE1[2:0] bits (APB1 prescaler) */ -#define RCC_CFGR_PPRE1_0 ((u32)0x00000100) /* Bit 0 */ -#define RCC_CFGR_PPRE1_1 ((u32)0x00000200) /* Bit 1 */ -#define RCC_CFGR_PPRE1_2 ((u32)0x00000400) /* Bit 2 */ - -/* PPRE1 configuration */ -#define RCC_CFGR_PPRE1_DIV1 ((u32)0x00000000) /* HCLK not divided */ -#define RCC_CFGR_PPRE1_DIV2 ((u32)0x00000400) /* HCLK divided by 2 */ -#define RCC_CFGR_PPRE1_DIV4 ((u32)0x00000500) /* HCLK divided by 4 */ -#define RCC_CFGR_PPRE1_DIV8 ((u32)0x00000600) /* HCLK divided by 8 */ -#define RCC_CFGR_PPRE1_DIV16 ((u32)0x00000700) /* HCLK divided by 16 */ - -#define RCC_CFGR_PPRE2 ((u32)0x00003800) /* PRE2[2:0] bits (APB2 prescaler) */ -#define RCC_CFGR_PPRE2_0 ((u32)0x00000800) /* Bit 0 */ -#define RCC_CFGR_PPRE2_1 ((u32)0x00001000) /* Bit 1 */ -#define RCC_CFGR_PPRE2_2 ((u32)0x00002000) /* Bit 2 */ - -/* PPRE2 configuration */ -#define RCC_CFGR_PPRE2_DIV1 ((u32)0x00000000) /* HCLK not divided */ -#define RCC_CFGR_PPRE2_DIV2 ((u32)0x00002000) /* HCLK divided by 2 */ -#define RCC_CFGR_PPRE2_DIV4 ((u32)0x00002800) /* HCLK divided by 4 */ -#define RCC_CFGR_PPRE2_DIV8 ((u32)0x00003000) /* HCLK divided by 8 */ -#define RCC_CFGR_PPRE2_DIV16 ((u32)0x00003800) /* HCLK divided by 16 */ - -#define RCC_CFGR_ADCPRE ((u32)0x0000C000) /* ADCPRE[1:0] bits (ADC prescaler) */ -#define RCC_CFGR_ADCPRE_0 ((u32)0x00004000) /* Bit 0 */ -#define RCC_CFGR_ADCPRE_1 ((u32)0x00008000) /* Bit 1 */ - -/* ADCPPRE configuration */ -#define RCC_CFGR_ADCPRE_DIV2 ((u32)0x00000000) /* PCLK2 divided by 2 */ -#define RCC_CFGR_ADCPRE_DIV4 ((u32)0x00004000) /* PCLK2 divided by 4 */ -#define RCC_CFGR_ADCPRE_DIV6 ((u32)0x00008000) /* PCLK2 divided by 6 */ -#define RCC_CFGR_ADCPRE_DIV8 ((u32)0x0000C000) /* PCLK2 divided by 8 */ - -#define RCC_CFGR_PLLSRC ((u32)0x00010000) /* PLL entry clock source */ -#define RCC_CFGR_PLLXTPRE ((u32)0x00020000) /* HSE divider for PLL entry */ - -#define RCC_CFGR_PLLMULL ((u32)0x003C0000) /* PLLMUL[3:0] bits (PLL multiplication factor) */ -#define RCC_CFGR_PLLMULL_0 ((u32)0x00040000) /* Bit 0 */ -#define RCC_CFGR_PLLMULL_1 ((u32)0x00080000) /* Bit 1 */ -#define RCC_CFGR_PLLMULL_2 ((u32)0x00100000) /* Bit 2 */ -#define RCC_CFGR_PLLMULL_3 ((u32)0x00200000) /* Bit 3 */ - -/* PLLMUL configuration */ -#define RCC_CFGR_PLLMULL2 ((u32)0x00000000) /* PLL input clock*2 */ -#define RCC_CFGR_PLLMULL3 ((u32)0x00040000) /* PLL input clock*3 */ -#define RCC_CFGR_PLLMULL4 ((u32)0x00080000) /* PLL input clock*4 */ -#define RCC_CFGR_PLLMULL5 ((u32)0x000C0000) /* PLL input clock*5 */ -#define RCC_CFGR_PLLMULL6 ((u32)0x00100000) /* PLL input clock*6 */ -#define RCC_CFGR_PLLMULL7 ((u32)0x00140000) /* PLL input clock*7 */ -#define RCC_CFGR_PLLMULL8 ((u32)0x00180000) /* PLL input clock*8 */ -#define RCC_CFGR_PLLMULL9 ((u32)0x001C0000) /* PLL input clock*9 */ -#define RCC_CFGR_PLLMULL10 ((u32)0x00200000) /* PLL input clock10 */ -#define RCC_CFGR_PLLMULL11 ((u32)0x00240000) /* PLL input clock*11 */ -#define RCC_CFGR_PLLMULL12 ((u32)0x00280000) /* PLL input clock*12 */ -#define RCC_CFGR_PLLMULL13 ((u32)0x002C0000) /* PLL input clock*13 */ -#define RCC_CFGR_PLLMULL14 ((u32)0x00300000) /* PLL input clock*14 */ -#define RCC_CFGR_PLLMULL15 ((u32)0x00340000) /* PLL input clock*15 */ -#define RCC_CFGR_PLLMULL16 ((u32)0x00380000) /* PLL input clock*16 */ - -#define RCC_CFGR_USBPRE ((u32)0x00400000) /* USB prescaler */ - -#define RCC_CFGR_MCO ((u32)0x07000000) /* MCO[2:0] bits (Microcontroller Clock Output) */ -#define RCC_CFGR_MCO_0 ((u32)0x01000000) /* Bit 0 */ -#define RCC_CFGR_MCO_1 ((u32)0x02000000) /* Bit 1 */ -#define RCC_CFGR_MCO_2 ((u32)0x04000000) /* Bit 2 */ - -/* MCO configuration */ -#define RCC_CFGR_MCO_NOCLOCK ((u32)0x00000000) /* No clock */ -#define RCC_CFGR_MCO_SYSCLK ((u32)0x04000000) /* System clock selected */ -#define RCC_CFGR_MCO_HSI ((u32)0x05000000) /* Internal 8 MHz RC oscillator clock selected */ -#define RCC_CFGR_MCO_HSE ((u32)0x06000000) /* External 1-25 MHz oscillator clock selected */ -#define RCC_CFGR_MCO_PLL ((u32)0x07000000) /* PLL clock divided by 2 selected*/ - - -/******************* Bit definition for RCC_CIR register ********************/ -#define RCC_CIR_LSIRDYF ((u32)0x00000001) /* LSI Ready Interrupt flag */ -#define RCC_CIR_LSERDYF ((u32)0x00000002) /* LSE Ready Interrupt flag */ -#define RCC_CIR_HSIRDYF ((u32)0x00000004) /* HSI Ready Interrupt flag */ -#define RCC_CIR_HSERDYF ((u32)0x00000008) /* HSE Ready Interrupt flag */ -#define RCC_CIR_PLLRDYF ((u32)0x00000010) /* PLL Ready Interrupt flag */ -#define RCC_CIR_CSSF ((u32)0x00000080) /* Clock Security System Interrupt flag */ -#define RCC_CIR_LSIRDYIE ((u32)0x00000100) /* LSI Ready Interrupt Enable */ -#define RCC_CIR_LSERDYIE ((u32)0x00000200) /* LSE Ready Interrupt Enable */ -#define RCC_CIR_HSIRDYIE ((u32)0x00000400) /* HSI Ready Interrupt Enable */ -#define RCC_CIR_HSERDYIE ((u32)0x00000800) /* HSE Ready Interrupt Enable */ -#define RCC_CIR_PLLRDYIE ((u32)0x00001000) /* PLL Ready Interrupt Enable */ -#define RCC_CIR_LSIRDYC ((u32)0x00010000) /* LSI Ready Interrupt Clear */ -#define RCC_CIR_LSERDYC ((u32)0x00020000) /* LSE Ready Interrupt Clear */ -#define RCC_CIR_HSIRDYC ((u32)0x00040000) /* HSI Ready Interrupt Clear */ -#define RCC_CIR_HSERDYC ((u32)0x00080000) /* HSE Ready Interrupt Clear */ -#define RCC_CIR_PLLRDYC ((u32)0x00100000) /* PLL Ready Interrupt Clear */ -#define RCC_CIR_CSSC ((u32)0x00800000) /* Clock Security System Interrupt Clear */ - - -/***************** Bit definition for RCC_APB2RSTR register *****************/ -#define RCC_APB2RSTR_AFIORST ((u16)0x0001) /* Alternate Function I/O reset */ -#define RCC_APB2RSTR_IOPARST ((u16)0x0004) /* I/O port A reset */ -#define RCC_APB2RSTR_IOPBRST ((u16)0x0008) /* IO port B reset */ -#define RCC_APB2RSTR_IOPCRST ((u16)0x0010) /* IO port C reset */ -#define RCC_APB2RSTR_IOPDRST ((u16)0x0020) /* IO port D reset */ -#define RCC_APB2RSTR_IOPERST ((u16)0x0040) /* IO port E reset */ -#define RCC_APB2RSTR_IOPFRST ((u16)0x0080) /* IO port F reset */ -#define RCC_APB2RSTR_IOPGRST ((u16)0x0100) /* IO port G reset */ -#define RCC_APB2RSTR_ADC1RST ((u16)0x0200) /* ADC 1 interface reset */ -#define RCC_APB2RSTR_ADC2RST ((u16)0x0400) /* ADC 2 interface reset */ -#define RCC_APB2RSTR_TIM1RST ((u16)0x0800) /* TIM1 Timer reset */ -#define RCC_APB2RSTR_SPI1RST ((u16)0x1000) /* SPI 1 reset */ -#define RCC_APB2RSTR_TIM8RST ((u16)0x2000) /* TIM8 Timer reset */ -#define RCC_APB2RSTR_USART1RST ((u16)0x4000) /* USART1 reset */ -#define RCC_APB2RSTR_ADC3RST ((u16)0x8000) /* ADC3 interface reset */ - - -/***************** Bit definition for RCC_APB1RSTR register *****************/ -#define RCC_APB1RSTR_TIM2RST ((u32)0x00000001) /* Timer 2 reset */ -#define RCC_APB1RSTR_TIM3RST ((u32)0x00000002) /* Timer 3 reset */ -#define RCC_APB1RSTR_TIM4RST ((u32)0x00000004) /* Timer 4 reset */ -#define RCC_APB1RSTR_TIM5RST ((u32)0x00000008) /* Timer 5 reset */ -#define RCC_APB1RSTR_TIM6RST ((u32)0x00000010) /* Timer 6 reset */ -#define RCC_APB1RSTR_TIM7RST ((u32)0x00000020) /* Timer 7 reset */ -#define RCC_APB1RSTR_WWDGRST ((u32)0x00000800) /* Window Watchdog reset */ -#define RCC_APB1RSTR_SPI2RST ((u32)0x00004000) /* SPI 2 reset */ -#define RCC_APB1RSTR_SPI3RST ((u32)0x00008000) /* SPI 3 reset */ -#define RCC_APB1RSTR_USART2RST ((u32)0x00020000) /* USART 2 reset */ -#define RCC_APB1RSTR_USART3RST ((u32)0x00040000) /* RUSART 3 reset */ -#define RCC_APB1RSTR_UART4RST ((u32)0x00080000) /* USART 4 reset */ -#define RCC_APB1RSTR_UART5RST ((u32)0x00100000) /* USART 5 reset */ -#define RCC_APB1RSTR_I2C1RST ((u32)0x00200000) /* I2C 1 reset */ -#define RCC_APB1RSTR_I2C2RST ((u32)0x00400000) /* I2C 2 reset */ -#define RCC_APB1RSTR_USBRST ((u32)0x00800000) /* USB reset */ -#define RCC_APB1RSTR_CANRST ((u32)0x02000000) /* CAN reset */ -#define RCC_APB1RSTR_BKPRST ((u32)0x08000000) /* Backup interface reset */ -#define RCC_APB1RSTR_PWRRST ((u32)0x10000000) /* Power interface reset */ -#define RCC_APB1RSTR_DACRST ((u32)0x20000000) /* DAC interface reset */ - - -/****************** Bit definition for RCC_AHBENR register ******************/ -#define RCC_AHBENR_DMA1EN ((u16)0x0001) /* DMA1 clock enable */ -#define RCC_AHBENR_DMA2EN ((u16)0x0002) /* DMA2 clock enable */ -#define RCC_AHBENR_SRAMEN ((u16)0x0004) /* SRAM interface clock enable */ -#define RCC_AHBENR_FLITFEN ((u16)0x0010) /* FLITF clock enable */ -#define RCC_AHBENR_CRCEN ((u16)0x0040) /* CRC clock enable */ -#define RCC_AHBENR_FSMCEN ((u16)0x0100) /* FSMC clock enable */ -#define RCC_AHBENR_SDIOEN ((u16)0x0400) /* SDIO clock enable */ - - -/****************** Bit definition for RCC_APB2ENR register *****************/ -#define RCC_APB2ENR_AFIOEN ((u16)0x0001) /* Alternate Function I/O clock enable */ -#define RCC_APB2ENR_IOPAEN ((u16)0x0004) /* I/O port A clock enable */ -#define RCC_APB2ENR_IOPBEN ((u16)0x0008) /* I/O port B clock enable */ -#define RCC_APB2ENR_IOPCEN ((u16)0x0010) /* I/O port C clock enable */ -#define RCC_APB2ENR_IOPDEN ((u16)0x0020) /* I/O port D clock enable */ -#define RCC_APB2ENR_IOPEEN ((u16)0x0040) /* I/O port E clock enable */ -#define RCC_APB2ENR_IOPFEN ((u16)0x0080) /* I/O port F clock enable */ -#define RCC_APB2ENR_IOPGEN ((u16)0x0100) /* I/O port G clock enable */ -#define RCC_APB2ENR_ADC1EN ((u16)0x0200) /* ADC 1 interface clock enable */ -#define RCC_APB2ENR_ADC2EN ((u16)0x0400) /* ADC 2 interface clock enable */ -#define RCC_APB2ENR_TIM1EN ((u16)0x0800) /* TIM1 Timer clock enable */ -#define RCC_APB2ENR_SPI1EN ((u16)0x1000) /* SPI 1 clock enable */ -#define RCC_APB2ENR_TIM8EN ((u16)0x2000) /* TIM8 Timer clock enable */ -#define RCC_APB2ENR_USART1EN ((u16)0x4000) /* USART1 clock enable */ -#define RCC_APB2ENR_ADC3EN ((u16)0x8000) /* DMA1 clock enable */ - - -/***************** Bit definition for RCC_APB1ENR register ******************/ -#define RCC_APB1ENR_TIM2EN ((u32)0x00000001) /* Timer 2 clock enabled*/ -#define RCC_APB1ENR_TIM3EN ((u32)0x00000002) /* Timer 3 clock enable */ -#define RCC_APB1ENR_TIM4EN ((u32)0x00000004) /* Timer 4 clock enable */ -#define RCC_APB1ENR_TIM5EN ((u32)0x00000008) /* Timer 5 clock enable */ -#define RCC_APB1ENR_TIM6EN ((u32)0x00000010) /* Timer 6 clock enable */ -#define RCC_APB1ENR_TIM7EN ((u32)0x00000020) /* Timer 7 clock enable */ -#define RCC_APB1ENR_WWDGEN ((u32)0x00000800) /* Window Watchdog clock enable */ -#define RCC_APB1ENR_SPI2EN ((u32)0x00004000) /* SPI 2 clock enable */ -#define RCC_APB1ENR_SPI3EN ((u32)0x00008000) /* SPI 3 clock enable */ -#define RCC_APB1ENR_USART2EN ((u32)0x00020000) /* USART 2 clock enable */ -#define RCC_APB1ENR_USART3EN ((u32)0x00040000) /* USART 3 clock enable */ -#define RCC_APB1ENR_UART4EN ((u32)0x00080000) /* USART 4 clock enable */ -#define RCC_APB1ENR_UART5EN ((u32)0x00100000) /* USART 5 clock enable */ -#define RCC_APB1ENR_I2C1EN ((u32)0x00200000) /* I2C 1 clock enable */ -#define RCC_APB1ENR_I2C2EN ((u32)0x00400000) /* I2C 2 clock enable */ -#define RCC_APB1ENR_USBEN ((u32)0x00800000) /* USB clock enable */ -#define RCC_APB1ENR_CANEN ((u32)0x02000000) /* CAN clock enable */ -#define RCC_APB1ENR_BKPEN ((u32)0x08000000) /* Backup interface clock enable */ -#define RCC_APB1ENR_PWREN ((u32)0x10000000) /* Power interface clock enable */ -#define RCC_APB1ENR_DACEN ((u32)0x20000000) /* DAC interface clock enable */ - - -/******************* Bit definition for RCC_BDCR register *******************/ -#define RCC_BDCR_LSEON ((u32)0x00000001) /* External Low Speed oscillator enable */ -#define RCC_BDCR_LSERDY ((u32)0x00000002) /* External Low Speed oscillator Ready */ -#define RCC_BDCR_LSEBYP ((u32)0x00000004) /* External Low Speed oscillator Bypass */ - -#define RCC_BDCR_RTCSEL ((u32)0x00000300) /* RTCSEL[1:0] bits (RTC clock source selection) */ -#define RCC_BDCR_RTCSEL_0 ((u32)0x00000100) /* Bit 0 */ -#define RCC_BDCR_RTCSEL_1 ((u32)0x00000200) /* Bit 1 */ -/* RTC congiguration */ -#define RCC_BDCR_RTCSEL_NOCLOCK ((u32)0x00000000) /* No clock */ -#define RCC_BDCR_RTCSEL_LSE ((u32)0x00000100) /* LSE oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_LSI ((u32)0x00000200) /* LSI oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_HSE ((u32)0x00000300) /* HSE oscillator clock divided by 128 used as RTC clock */ - -#define RCC_BDCR_RTCEN ((u32)0x00008000) /* RTC clock enable */ -#define RCC_BDCR_BDRST ((u32)0x00010000) /* Backup domain software reset */ - - -/******************* Bit definition for RCC_CSR register ********************/ -#define RCC_CSR_LSION ((u32)0x00000001) /* Internal Low Speed oscillator enable */ -#define RCC_CSR_LSIRDY ((u32)0x00000002) /* Internal Low Speed oscillator Ready */ -#define RCC_CSR_RMVF ((u32)0x01000000) /* Remove reset flag */ -#define RCC_CSR_PINRSTF ((u32)0x04000000) /* PIN reset flag */ -#define RCC_CSR_PORRSTF ((u32)0x08000000) /* POR/PDR reset flag */ -#define RCC_CSR_SFTRSTF ((u32)0x10000000) /* Software Reset flag */ -#define RCC_CSR_IWDGRSTF ((u32)0x20000000) /* Independent Watchdog reset flag */ -#define RCC_CSR_WWDGRSTF ((u32)0x40000000) /* Window watchdog reset flag */ -#define RCC_CSR_LPWRRSTF ((u32)0x80000000) /* Low-Power reset flag */ - - - -/******************************************************************************/ -/* */ -/* General Purpose and Alternate Function IO */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for GPIO_CRL register *******************/ -#define GPIO_CRL_MODE ((u32)0x33333333) /* Port x mode bits */ - -#define GPIO_CRL_MODE0 ((u32)0x00000003) /* MODE0[1:0] bits (Port x mode bits, pin 0) */ -#define GPIO_CRL_MODE0_0 ((u32)0x00000001) /* Bit 0 */ -#define GPIO_CRL_MODE0_1 ((u32)0x00000002) /* Bit 1 */ - -#define GPIO_CRL_MODE1 ((u32)0x00000030) /* MODE1[1:0] bits (Port x mode bits, pin 1) */ -#define GPIO_CRL_MODE1_0 ((u32)0x00000010) /* Bit 0 */ -#define GPIO_CRL_MODE1_1 ((u32)0x00000020) /* Bit 1 */ - -#define GPIO_CRL_MODE2 ((u32)0x00000300) /* MODE2[1:0] bits (Port x mode bits, pin 2) */ -#define GPIO_CRL_MODE2_0 ((u32)0x00000100) /* Bit 0 */ -#define GPIO_CRL_MODE2_1 ((u32)0x00000200) /* Bit 1 */ - -#define GPIO_CRL_MODE3 ((u32)0x00003000) /* MODE3[1:0] bits (Port x mode bits, pin 3) */ -#define GPIO_CRL_MODE3_0 ((u32)0x00001000) /* Bit 0 */ -#define GPIO_CRL_MODE3_1 ((u32)0x00002000) /* Bit 1 */ - -#define GPIO_CRL_MODE4 ((u32)0x00030000) /* MODE4[1:0] bits (Port x mode bits, pin 4) */ -#define GPIO_CRL_MODE4_0 ((u32)0x00010000) /* Bit 0 */ -#define GPIO_CRL_MODE4_1 ((u32)0x00020000) /* Bit 1 */ - -#define GPIO_CRL_MODE5 ((u32)0x00300000) /* MODE5[1:0] bits (Port x mode bits, pin 5) */ -#define GPIO_CRL_MODE5_0 ((u32)0x00100000) /* Bit 0 */ -#define GPIO_CRL_MODE5_1 ((u32)0x00200000) /* Bit 1 */ - -#define GPIO_CRL_MODE6 ((u32)0x03000000) /* MODE6[1:0] bits (Port x mode bits, pin 6) */ -#define GPIO_CRL_MODE6_0 ((u32)0x01000000) /* Bit 0 */ -#define GPIO_CRL_MODE6_1 ((u32)0x02000000) /* Bit 1 */ - -#define GPIO_CRL_MODE7 ((u32)0x30000000) /* MODE7[1:0] bits (Port x mode bits, pin 7) */ -#define GPIO_CRL_MODE7_0 ((u32)0x10000000) /* Bit 0 */ -#define GPIO_CRL_MODE7_1 ((u32)0x20000000) /* Bit 1 */ - - -#define GPIO_CRL_CNF ((u32)0xCCCCCCCC) /* Port x configuration bits */ - -#define GPIO_CRL_CNF0 ((u32)0x0000000C) /* CNF0[1:0] bits (Port x configuration bits, pin 0) */ -#define GPIO_CRL_CNF0_0 ((u32)0x00000004) /* Bit 0 */ -#define GPIO_CRL_CNF0_1 ((u32)0x00000008) /* Bit 1 */ - -#define GPIO_CRL_CNF1 ((u32)0x000000C0) /* CNF1[1:0] bits (Port x configuration bits, pin 1) */ -#define GPIO_CRL_CNF1_0 ((u32)0x00000040) /* Bit 0 */ -#define GPIO_CRL_CNF1_1 ((u32)0x00000080) /* Bit 1 */ - -#define GPIO_CRL_CNF2 ((u32)0x00000C00) /* CNF2[1:0] bits (Port x configuration bits, pin 2) */ -#define GPIO_CRL_CNF2_0 ((u32)0x00000400) /* Bit 0 */ -#define GPIO_CRL_CNF2_1 ((u32)0x00000800) /* Bit 1 */ - -#define GPIO_CRL_CNF3 ((u32)0x0000C000) /* CNF3[1:0] bits (Port x configuration bits, pin 3) */ -#define GPIO_CRL_CNF3_0 ((u32)0x00004000) /* Bit 0 */ -#define GPIO_CRL_CNF3_1 ((u32)0x00008000) /* Bit 1 */ - -#define GPIO_CRL_CNF4 ((u32)0x000C0000) /* CNF4[1:0] bits (Port x configuration bits, pin 4) */ -#define GPIO_CRL_CNF4_0 ((u32)0x00040000) /* Bit 0 */ -#define GPIO_CRL_CNF4_1 ((u32)0x00080000) /* Bit 1 */ - -#define GPIO_CRL_CNF5 ((u32)0x00C00000) /* CNF5[1:0] bits (Port x configuration bits, pin 5) */ -#define GPIO_CRL_CNF5_0 ((u32)0x00400000) /* Bit 0 */ -#define GPIO_CRL_CNF5_1 ((u32)0x00800000) /* Bit 1 */ - -#define GPIO_CRL_CNF6 ((u32)0x0C000000) /* CNF6[1:0] bits (Port x configuration bits, pin 6) */ -#define GPIO_CRL_CNF6_0 ((u32)0x04000000) /* Bit 0 */ -#define GPIO_CRL_CNF6_1 ((u32)0x08000000) /* Bit 1 */ - -#define GPIO_CRL_CNF7 ((u32)0xC0000000) /* CNF7[1:0] bits (Port x configuration bits, pin 7) */ -#define GPIO_CRL_CNF7_0 ((u32)0x40000000) /* Bit 0 */ -#define GPIO_CRL_CNF7_1 ((u32)0x80000000) /* Bit 1 */ - - -/******************* Bit definition for GPIO_CRH register *******************/ -#define GPIO_CRH_MODE ((u32)0x33333333) /* Port x mode bits */ - -#define GPIO_CRH_MODE8 ((u32)0x00000003) /* MODE8[1:0] bits (Port x mode bits, pin 8) */ -#define GPIO_CRH_MODE8_0 ((u32)0x00000001) /* Bit 0 */ -#define GPIO_CRH_MODE8_1 ((u32)0x00000002) /* Bit 1 */ - -#define GPIO_CRH_MODE9 ((u32)0x00000030) /* MODE9[1:0] bits (Port x mode bits, pin 9) */ -#define GPIO_CRH_MODE9_0 ((u32)0x00000010) /* Bit 0 */ -#define GPIO_CRH_MODE9_1 ((u32)0x00000020) /* Bit 1 */ - -#define GPIO_CRH_MODE10 ((u32)0x00000300) /* MODE10[1:0] bits (Port x mode bits, pin 10) */ -#define GPIO_CRH_MODE10_0 ((u32)0x00000100) /* Bit 0 */ -#define GPIO_CRH_MODE10_1 ((u32)0x00000200) /* Bit 1 */ - -#define GPIO_CRH_MODE11 ((u32)0x00003000) /* MODE11[1:0] bits (Port x mode bits, pin 11) */ -#define GPIO_CRH_MODE11_0 ((u32)0x00001000) /* Bit 0 */ -#define GPIO_CRH_MODE11_1 ((u32)0x00002000) /* Bit 1 */ - -#define GPIO_CRH_MODE12 ((u32)0x00030000) /* MODE12[1:0] bits (Port x mode bits, pin 12) */ -#define GPIO_CRH_MODE12_0 ((u32)0x00010000) /* Bit 0 */ -#define GPIO_CRH_MODE12_1 ((u32)0x00020000) /* Bit 1 */ - -#define GPIO_CRH_MODE13 ((u32)0x00300000) /* MODE13[1:0] bits (Port x mode bits, pin 13) */ -#define GPIO_CRH_MODE13_0 ((u32)0x00100000) /* Bit 0 */ -#define GPIO_CRH_MODE13_1 ((u32)0x00200000) /* Bit 1 */ - -#define GPIO_CRH_MODE14 ((u32)0x03000000) /* MODE14[1:0] bits (Port x mode bits, pin 14) */ -#define GPIO_CRH_MODE14_0 ((u32)0x01000000) /* Bit 0 */ -#define GPIO_CRH_MODE14_1 ((u32)0x02000000) /* Bit 1 */ - -#define GPIO_CRH_MODE15 ((u32)0x30000000) /* MODE15[1:0] bits (Port x mode bits, pin 15) */ -#define GPIO_CRH_MODE15_0 ((u32)0x10000000) /* Bit 0 */ -#define GPIO_CRH_MODE15_1 ((u32)0x20000000) /* Bit 1 */ - - -#define GPIO_CRH_CNF ((u32)0xCCCCCCCC) /* Port x configuration bits */ - -#define GPIO_CRH_CNF8 ((u32)0x0000000C) /* CNF8[1:0] bits (Port x configuration bits, pin 8) */ -#define GPIO_CRH_CNF8_0 ((u32)0x00000004) /* Bit 0 */ -#define GPIO_CRH_CNF8_1 ((u32)0x00000008) /* Bit 1 */ - -#define GPIO_CRH_CNF9 ((u32)0x000000C0) /* CNF9[1:0] bits (Port x configuration bits, pin 9) */ -#define GPIO_CRH_CNF9_0 ((u32)0x00000040) /* Bit 0 */ -#define GPIO_CRH_CNF9_1 ((u32)0x00000080) /* Bit 1 */ - -#define GPIO_CRH_CNF10 ((u32)0x00000C00) /* CNF10[1:0] bits (Port x configuration bits, pin 10) */ -#define GPIO_CRH_CNF10_0 ((u32)0x00000400) /* Bit 0 */ -#define GPIO_CRH_CNF10_1 ((u32)0x00000800) /* Bit 1 */ - -#define GPIO_CRH_CNF11 ((u32)0x0000C000) /* CNF11[1:0] bits (Port x configuration bits, pin 11) */ -#define GPIO_CRH_CNF11_0 ((u32)0x00004000) /* Bit 0 */ -#define GPIO_CRH_CNF11_1 ((u32)0x00008000) /* Bit 1 */ - -#define GPIO_CRH_CNF12 ((u32)0x000C0000) /* CNF12[1:0] bits (Port x configuration bits, pin 12) */ -#define GPIO_CRH_CNF12_0 ((u32)0x00040000) /* Bit 0 */ -#define GPIO_CRH_CNF12_1 ((u32)0x00080000) /* Bit 1 */ - -#define GPIO_CRH_CNF13 ((u32)0x00C00000) /* CNF13[1:0] bits (Port x configuration bits, pin 13) */ -#define GPIO_CRH_CNF13_0 ((u32)0x00400000) /* Bit 0 */ -#define GPIO_CRH_CNF13_1 ((u32)0x00800000) /* Bit 1 */ - -#define GPIO_CRH_CNF14 ((u32)0x0C000000) /* CNF14[1:0] bits (Port x configuration bits, pin 14) */ -#define GPIO_CRH_CNF14_0 ((u32)0x04000000) /* Bit 0 */ -#define GPIO_CRH_CNF14_1 ((u32)0x08000000) /* Bit 1 */ - -#define GPIO_CRH_CNF15 ((u32)0xC0000000) /* CNF15[1:0] bits (Port x configuration bits, pin 15) */ -#define GPIO_CRH_CNF15_0 ((u32)0x40000000) /* Bit 0 */ -#define GPIO_CRH_CNF15_1 ((u32)0x80000000) /* Bit 1 */ - - -/******************* Bit definition for GPIO_IDR register *******************/ -#define GPIO_IDR_IDR0 ((u16)0x0001) /* Port input data, bit 0 */ -#define GPIO_IDR_IDR1 ((u16)0x0002) /* Port input data, bit 1 */ -#define GPIO_IDR_IDR2 ((u16)0x0004) /* Port input data, bit 2 */ -#define GPIO_IDR_IDR3 ((u16)0x0008) /* Port input data, bit 3 */ -#define GPIO_IDR_IDR4 ((u16)0x0010) /* Port input data, bit 4 */ -#define GPIO_IDR_IDR5 ((u16)0x0020) /* Port input data, bit 5 */ -#define GPIO_IDR_IDR6 ((u16)0x0040) /* Port input data, bit 6 */ -#define GPIO_IDR_IDR7 ((u16)0x0080) /* Port input data, bit 7 */ -#define GPIO_IDR_IDR8 ((u16)0x0100) /* Port input data, bit 8 */ -#define GPIO_IDR_IDR9 ((u16)0x0200) /* Port input data, bit 9 */ -#define GPIO_IDR_IDR10 ((u16)0x0400) /* Port input data, bit 10 */ -#define GPIO_IDR_IDR11 ((u16)0x0800) /* Port input data, bit 11 */ -#define GPIO_IDR_IDR12 ((u16)0x1000) /* Port input data, bit 12 */ -#define GPIO_IDR_IDR13 ((u16)0x2000) /* Port input data, bit 13 */ -#define GPIO_IDR_IDR14 ((u16)0x4000) /* Port input data, bit 14 */ -#define GPIO_IDR_IDR15 ((u16)0x8000) /* Port input data, bit 15 */ - - -/******************* Bit definition for GPIO_ODR register *******************/ -#define GPIO_ODR_ODR0 ((u16)0x0001) /* Port output data, bit 0 */ -#define GPIO_ODR_ODR1 ((u16)0x0002) /* Port output data, bit 1 */ -#define GPIO_ODR_ODR2 ((u16)0x0004) /* Port output data, bit 2 */ -#define GPIO_ODR_ODR3 ((u16)0x0008) /* Port output data, bit 3 */ -#define GPIO_ODR_ODR4 ((u16)0x0010) /* Port output data, bit 4 */ -#define GPIO_ODR_ODR5 ((u16)0x0020) /* Port output data, bit 5 */ -#define GPIO_ODR_ODR6 ((u16)0x0040) /* Port output data, bit 6 */ -#define GPIO_ODR_ODR7 ((u16)0x0080) /* Port output data, bit 7 */ -#define GPIO_ODR_ODR8 ((u16)0x0100) /* Port output data, bit 8 */ -#define GPIO_ODR_ODR9 ((u16)0x0200) /* Port output data, bit 9 */ -#define GPIO_ODR_ODR10 ((u16)0x0400) /* Port output data, bit 10 */ -#define GPIO_ODR_ODR11 ((u16)0x0800) /* Port output data, bit 11 */ -#define GPIO_ODR_ODR12 ((u16)0x1000) /* Port output data, bit 12 */ -#define GPIO_ODR_ODR13 ((u16)0x2000) /* Port output data, bit 13 */ -#define GPIO_ODR_ODR14 ((u16)0x4000) /* Port output data, bit 14 */ -#define GPIO_ODR_ODR15 ((u16)0x8000) /* Port output data, bit 15 */ - - -/****************** Bit definition for GPIO_BSRR register *******************/ -#define GPIO_BSRR_BS0 ((u32)0x00000001) /* Port x Set bit 0 */ -#define GPIO_BSRR_BS1 ((u32)0x00000002) /* Port x Set bit 1 */ -#define GPIO_BSRR_BS2 ((u32)0x00000004) /* Port x Set bit 2 */ -#define GPIO_BSRR_BS3 ((u32)0x00000008) /* Port x Set bit 3 */ -#define GPIO_BSRR_BS4 ((u32)0x00000010) /* Port x Set bit 4 */ -#define GPIO_BSRR_BS5 ((u32)0x00000020) /* Port x Set bit 5 */ -#define GPIO_BSRR_BS6 ((u32)0x00000040) /* Port x Set bit 6 */ -#define GPIO_BSRR_BS7 ((u32)0x00000080) /* Port x Set bit 7 */ -#define GPIO_BSRR_BS8 ((u32)0x00000100) /* Port x Set bit 8 */ -#define GPIO_BSRR_BS9 ((u32)0x00000200) /* Port x Set bit 9 */ -#define GPIO_BSRR_BS10 ((u32)0x00000400) /* Port x Set bit 10 */ -#define GPIO_BSRR_BS11 ((u32)0x00000800) /* Port x Set bit 11 */ -#define GPIO_BSRR_BS12 ((u32)0x00001000) /* Port x Set bit 12 */ -#define GPIO_BSRR_BS13 ((u32)0x00002000) /* Port x Set bit 13 */ -#define GPIO_BSRR_BS14 ((u32)0x00004000) /* Port x Set bit 14 */ -#define GPIO_BSRR_BS15 ((u32)0x00008000) /* Port x Set bit 15 */ - -#define GPIO_BSRR_BR0 ((u32)0x00010000) /* Port x Reset bit 0 */ -#define GPIO_BSRR_BR1 ((u32)0x00020000) /* Port x Reset bit 1 */ -#define GPIO_BSRR_BR2 ((u32)0x00040000) /* Port x Reset bit 2 */ -#define GPIO_BSRR_BR3 ((u32)0x00080000) /* Port x Reset bit 3 */ -#define GPIO_BSRR_BR4 ((u32)0x00100000) /* Port x Reset bit 4 */ -#define GPIO_BSRR_BR5 ((u32)0x00200000) /* Port x Reset bit 5 */ -#define GPIO_BSRR_BR6 ((u32)0x00400000) /* Port x Reset bit 6 */ -#define GPIO_BSRR_BR7 ((u32)0x00800000) /* Port x Reset bit 7 */ -#define GPIO_BSRR_BR8 ((u32)0x01000000) /* Port x Reset bit 8 */ -#define GPIO_BSRR_BR9 ((u32)0x02000000) /* Port x Reset bit 9 */ -#define GPIO_BSRR_BR10 ((u32)0x04000000) /* Port x Reset bit 10 */ -#define GPIO_BSRR_BR11 ((u32)0x08000000) /* Port x Reset bit 11 */ -#define GPIO_BSRR_BR12 ((u32)0x10000000) /* Port x Reset bit 12 */ -#define GPIO_BSRR_BR13 ((u32)0x20000000) /* Port x Reset bit 13 */ -#define GPIO_BSRR_BR14 ((u32)0x40000000) /* Port x Reset bit 14 */ -#define GPIO_BSRR_BR15 ((u32)0x80000000) /* Port x Reset bit 15 */ - - -/******************* Bit definition for GPIO_BRR register *******************/ -#define GPIO_BRR_BR0 ((u16)0x0001) /* Port x Reset bit 0 */ -#define GPIO_BRR_BR1 ((u16)0x0002) /* Port x Reset bit 1 */ -#define GPIO_BRR_BR2 ((u16)0x0004) /* Port x Reset bit 2 */ -#define GPIO_BRR_BR3 ((u16)0x0008) /* Port x Reset bit 3 */ -#define GPIO_BRR_BR4 ((u16)0x0010) /* Port x Reset bit 4 */ -#define GPIO_BRR_BR5 ((u16)0x0020) /* Port x Reset bit 5 */ -#define GPIO_BRR_BR6 ((u16)0x0040) /* Port x Reset bit 6 */ -#define GPIO_BRR_BR7 ((u16)0x0080) /* Port x Reset bit 7 */ -#define GPIO_BRR_BR8 ((u16)0x0100) /* Port x Reset bit 8 */ -#define GPIO_BRR_BR9 ((u16)0x0200) /* Port x Reset bit 9 */ -#define GPIO_BRR_BR10 ((u16)0x0400) /* Port x Reset bit 10 */ -#define GPIO_BRR_BR11 ((u16)0x0800) /* Port x Reset bit 11 */ -#define GPIO_BRR_BR12 ((u16)0x1000) /* Port x Reset bit 12 */ -#define GPIO_BRR_BR13 ((u16)0x2000) /* Port x Reset bit 13 */ -#define GPIO_BRR_BR14 ((u16)0x4000) /* Port x Reset bit 14 */ -#define GPIO_BRR_BR15 ((u16)0x8000) /* Port x Reset bit 15 */ - - -/****************** Bit definition for GPIO_LCKR register *******************/ -#define GPIO_LCKR_LCK0 ((u32)0x00000001) /* Port x Lock bit 0 */ -#define GPIO_LCKR_LCK1 ((u32)0x00000002) /* Port x Lock bit 1 */ -#define GPIO_LCKR_LCK2 ((u32)0x00000004) /* Port x Lock bit 2 */ -#define GPIO_LCKR_LCK3 ((u32)0x00000008) /* Port x Lock bit 3 */ -#define GPIO_LCKR_LCK4 ((u32)0x00000010) /* Port x Lock bit 4 */ -#define GPIO_LCKR_LCK5 ((u32)0x00000020) /* Port x Lock bit 5 */ -#define GPIO_LCKR_LCK6 ((u32)0x00000040) /* Port x Lock bit 6 */ -#define GPIO_LCKR_LCK7 ((u32)0x00000080) /* Port x Lock bit 7 */ -#define GPIO_LCKR_LCK8 ((u32)0x00000100) /* Port x Lock bit 8 */ -#define GPIO_LCKR_LCK9 ((u32)0x00000200) /* Port x Lock bit 9 */ -#define GPIO_LCKR_LCK10 ((u32)0x00000400) /* Port x Lock bit 10 */ -#define GPIO_LCKR_LCK11 ((u32)0x00000800) /* Port x Lock bit 11 */ -#define GPIO_LCKR_LCK12 ((u32)0x00001000) /* Port x Lock bit 12 */ -#define GPIO_LCKR_LCK13 ((u32)0x00002000) /* Port x Lock bit 13 */ -#define GPIO_LCKR_LCK14 ((u32)0x00004000) /* Port x Lock bit 14 */ -#define GPIO_LCKR_LCK15 ((u32)0x00008000) /* Port x Lock bit 15 */ -#define GPIO_LCKR_LCKK ((u32)0x00010000) /* Lock key */ - - -/*----------------------------------------------------------------------------*/ - - -/****************** Bit definition for AFIO_EVCR register *******************/ -#define AFIO_EVCR_PIN ((u8)0x0F) /* PIN[3:0] bits (Pin selection) */ -#define AFIO_EVCR_PIN_0 ((u8)0x01) /* Bit 0 */ -#define AFIO_EVCR_PIN_1 ((u8)0x02) /* Bit 1 */ -#define AFIO_EVCR_PIN_2 ((u8)0x04) /* Bit 2 */ -#define AFIO_EVCR_PIN_3 ((u8)0x08) /* Bit 3 */ - -/* PIN configuration */ -#define AFIO_EVCR_PIN_PX0 ((u8)0x00) /* Pin 0 selected */ -#define AFIO_EVCR_PIN_PX1 ((u8)0x01) /* Pin 1 selected */ -#define AFIO_EVCR_PIN_PX2 ((u8)0x02) /* Pin 2 selected */ -#define AFIO_EVCR_PIN_PX3 ((u8)0x03) /* Pin 3 selected */ -#define AFIO_EVCR_PIN_PX4 ((u8)0x04) /* Pin 4 selected */ -#define AFIO_EVCR_PIN_PX5 ((u8)0x05) /* Pin 5 selected */ -#define AFIO_EVCR_PIN_PX6 ((u8)0x06) /* Pin 6 selected */ -#define AFIO_EVCR_PIN_PX7 ((u8)0x07) /* Pin 7 selected */ -#define AFIO_EVCR_PIN_PX8 ((u8)0x08) /* Pin 8 selected */ -#define AFIO_EVCR_PIN_PX9 ((u8)0x09) /* Pin 9 selected */ -#define AFIO_EVCR_PIN_PX10 ((u8)0x0A) /* Pin 10 selected */ -#define AFIO_EVCR_PIN_PX11 ((u8)0x0B) /* Pin 11 selected */ -#define AFIO_EVCR_PIN_PX12 ((u8)0x0C) /* Pin 12 selected */ -#define AFIO_EVCR_PIN_PX13 ((u8)0x0D) /* Pin 13 selected */ -#define AFIO_EVCR_PIN_PX14 ((u8)0x0E) /* Pin 14 selected */ -#define AFIO_EVCR_PIN_PX15 ((u8)0x0F) /* Pin 15 selected */ - -#define AFIO_EVCR_PORT ((u8)0x70) /* PORT[2:0] bits (Port selection) */ -#define AFIO_EVCR_PORT_0 ((u8)0x10) /* Bit 0 */ -#define AFIO_EVCR_PORT_1 ((u8)0x20) /* Bit 1 */ -#define AFIO_EVCR_PORT_2 ((u8)0x40) /* Bit 2 */ - -/* PORT configuration */ -#define AFIO_EVCR_PORT_PA ((u8)0x00) /* Port A selected */ -#define AFIO_EVCR_PORT_PB ((u8)0x10) /* Port B selected */ -#define AFIO_EVCR_PORT_PC ((u8)0x20) /* Port C selected */ -#define AFIO_EVCR_PORT_PD ((u8)0x30) /* Port D selected */ -#define AFIO_EVCR_PORT_PE ((u8)0x40) /* Port E selected */ - -#define AFIO_EVCR_EVOE ((u8)0x80) /* Event Output Enable */ - - -/****************** Bit definition for AFIO_MAPR register *******************/ -#define AFIO_MAPR_SPI1 _REMAP ((u32)0x00000001) /* SPI1 remapping */ -#define AFIO_MAPR_I2C1_REMAP ((u32)0x00000002) /* I2C1 remapping */ -#define AFIO_MAPR_USART1_REMAP ((u32)0x00000004) /* USART1 remapping */ -#define AFIO_MAPR_USART2_REMAP ((u32)0x00000008) /* USART2 remapping */ - -#define AFIO_MAPR_USART3_REMAP ((u32)0x00000030) /* USART3_REMAP[1:0] bits (USART3 remapping) */ -#define AFIO_MAPR_USART3_REMAP_0 ((u32)0x00000010) /* Bit 0 */ -#define AFIO_MAPR_USART3_REMAP_1 ((u32)0x00000020) /* Bit 1 */ - -/* USART3_REMAP configuration */ -#define AFIO_MAPR_USART3_REMAP_NOREMAP ((u32)0x00000000) /* No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((u32)0x00000010) /* Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((u32)0x00000030) /* Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ - -#define AFIO_MAPR_TIM1_REMAP ((u32)0x000000C0) /* TIM1_REMAP[1:0] bits (TIM1 remapping) */ -#define AFIO_MAPR_TIM1_REMAP_0 ((u32)0x00000040) /* Bit 0 */ -#define AFIO_MAPR_TIM1_REMAP_1 ((u32)0x00000080) /* Bit 1 */ - -/* TIM1_REMAP configuration */ -#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((u32)0x00000000) /* No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((u32)0x00000040) /* Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((u32)0x000000C0) /* Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ - -#define AFIO_MAPR_TIM2_REMAP ((u32)0x00000300) /* TIM2_REMAP[1:0] bits (TIM2 remapping) */ -#define AFIO_MAPR_TIM2_REMAP_0 ((u32)0x00000100) /* Bit 0 */ -#define AFIO_MAPR_TIM2_REMAP_1 ((u32)0x00000200) /* Bit 1 */ - -/* TIM2_REMAP configuration */ -#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((u32)0x00000000) /* No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((u32)0x00000100) /* Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((u32)0x00000200) /* Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((u32)0x00000300) /* Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ - -#define AFIO_MAPR_TIM3_REMAP ((u32)0x00000C00) /* TIM3_REMAP[1:0] bits (TIM3 remapping) */ -#define AFIO_MAPR_TIM3_REMAP_0 ((u32)0x00000400) /* Bit 0 */ -#define AFIO_MAPR_TIM3_REMAP_1 ((u32)0x00000800) /* Bit 1 */ - -/* TIM3_REMAP configuration */ -#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((u32)0x00000000) /* No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((u32)0x00000800) /* Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((u32)0x00000C00) /* Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ - -#define AFIO_MAPR_TIM4_REMAP ((u32)0x00001000) /* Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ - -#define AFIO_MAPR_CAN_REMAP ((u32)0x00006000) /* CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ -#define AFIO_MAPR_CAN_REMAP_0 ((u32)0x00002000) /* Bit 0 */ -#define AFIO_MAPR_CAN_REMAP_1 ((u32)0x00004000) /* Bit 1 */ - -/* CAN_REMAP configuration */ -#define AFIO_MAPR_CAN_REMAP_REMAP1 ((u32)0x00000000) /* CANRX mapped to PA11, CANTX mapped to PA12 */ -#define AFIO_MAPR_CAN_REMAP_REMAP2 ((u32)0x00004000) /* CANRX mapped to PB8, CANTX mapped to PB9 */ -#define AFIO_MAPR_CAN_REMAP_REMAP3 ((u32)0x00006000) /* CANRX mapped to PD0, CANTX mapped to PD1 */ - -#define AFIO_MAPR_PD01_REMAP ((u32)0x00008000) /* Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ -#define AFIO_MAPR_TIM5CH4_IREMAP ((u32)0x00010000) /* TIM5 Channel4 Internal Remap */ -#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((u32)0x00020000) /* ADC 1 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((u32)0x00040000) /* ADC 1 External Trigger Regular Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((u32)0x00080000) /* ADC 2 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((u32)0x00100000) /* ADC 2 External Trigger Regular Conversion remapping */ - -#define AFIO_MAPR_SWJ_CFG ((u32)0x07000000) /* SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ -#define AFIO_MAPR_SWJ_CFG_0 ((u32)0x01000000) /* Bit 0 */ -#define AFIO_MAPR_SWJ_CFG_1 ((u32)0x02000000) /* Bit 1 */ -#define AFIO_MAPR_SWJ_CFG_2 ((u32)0x04000000) /* Bit 2 */ - -/* SWJ_CFG configuration */ -#define AFIO_MAPR_SWJ_CFG_RESET ((u32)0x00000000) /* Full SWJ (JTAG-DP + SW-DP) : Reset State */ -#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((u32)0x01000000) /* Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((u32)0x02000000) /* JTAG-DP Disabled and SW-DP Enabled */ -#define AFIO_MAPR_SWJ_CFG_DISABLE ((u32)0x04000000) /* JTAG-DP Disabled and SW-DP Disabled */ - - -/***************** Bit definition for AFIO_EXTICR1 register *****************/ -#define AFIO_EXTICR1_EXTI0 ((u16)0x000F) /* EXTI 0 configuration */ -#define AFIO_EXTICR1_EXTI1 ((u16)0x00F0) /* EXTI 1 configuration */ -#define AFIO_EXTICR1_EXTI2 ((u16)0x0F00) /* EXTI 2 configuration */ -#define AFIO_EXTICR1_EXTI3 ((u16)0xF000) /* EXTI 3 configuration */ - -/* EXTI0 configuration */ -#define AFIO_EXTICR1_EXTI0_PA ((u16)0x0000) /* PA[0] pin */ -#define AFIO_EXTICR1_EXTI0_PB ((u16)0x0001) /* PB[0] pin */ -#define AFIO_EXTICR1_EXTI0_PC ((u16)0x0002) /* PC[0] pin */ -#define AFIO_EXTICR1_EXTI0_PD ((u16)0x0003) /* PD[0] pin */ -#define AFIO_EXTICR1_EXTI0_PE ((u16)0x0004) /* PE[0] pin */ -#define AFIO_EXTICR1_EXTI0_PF ((u16)0x0005) /* PF[0] pin */ -#define AFIO_EXTICR1_EXTI0_PG ((u16)0x0006) /* PG[0] pin */ - -/* EXTI1 configuration */ -#define AFIO_EXTICR1_EXTI1_PA ((u16)0x0000) /* PA[1] pin */ -#define AFIO_EXTICR1_EXTI1_PB ((u16)0x0010) /* PB[1] pin */ -#define AFIO_EXTICR1_EXTI1_PC ((u16)0x0020) /* PC[1] pin */ -#define AFIO_EXTICR1_EXTI1_PD ((u16)0x0030) /* PD[1] pin */ -#define AFIO_EXTICR1_EXTI1_PE ((u16)0x0040) /* PE[1] pin */ -#define AFIO_EXTICR1_EXTI1_PF ((u16)0x0050) /* PF[1] pin */ -#define AFIO_EXTICR1_EXTI1_PG ((u16)0x0060) /* PG[1] pin */ - -/* EXTI2 configuration */ -#define AFIO_EXTICR1_EXTI2_PA ((u16)0x0000) /* PA[2] pin */ -#define AFIO_EXTICR1_EXTI2_PB ((u16)0x0100) /* PB[2] pin */ -#define AFIO_EXTICR1_EXTI2_PC ((u16)0x0200) /* PC[2] pin */ -#define AFIO_EXTICR1_EXTI2_PD ((u16)0x0300) /* PD[2] pin */ -#define AFIO_EXTICR1_EXTI2_PE ((u16)0x0400) /* PE[2] pin */ -#define AFIO_EXTICR1_EXTI2_PF ((u16)0x0500) /* PF[2] pin */ -#define AFIO_EXTICR1_EXTI2_PG ((u16)0x0600) /* PG[2] pin */ - -/* EXTI3 configuration */ -#define AFIO_EXTICR1_EXTI3_PA ((u16)0x0000) /* PA[3] pin */ -#define AFIO_EXTICR1_EXTI3_PB ((u16)0x1000) /* PB[3] pin */ -#define AFIO_EXTICR1_EXTI3_PC ((u16)0x2000) /* PC[3] pin */ -#define AFIO_EXTICR1_EXTI3_PD ((u16)0x3000) /* PD[3] pin */ -#define AFIO_EXTICR1_EXTI3_PE ((u16)0x4000) /* PE[3] pin */ -#define AFIO_EXTICR1_EXTI3_PF ((u16)0x5000) /* PF[3] pin */ -#define AFIO_EXTICR1_EXTI3_PG ((u16)0x6000) /* PG[3] pin */ - - -/***************** Bit definition for AFIO_EXTICR2 register *****************/ -#define AFIO_EXTICR2_EXTI4 ((u16)0x000F) /* EXTI 4 configuration */ -#define AFIO_EXTICR2_EXTI5 ((u16)0x00F0) /* EXTI 5 configuration */ -#define AFIO_EXTICR2_EXTI6 ((u16)0x0F00) /* EXTI 6 configuration */ -#define AFIO_EXTICR2_EXTI7 ((u16)0xF000) /* EXTI 7 configuration */ - -/* EXTI4 configuration */ -#define AFIO_EXTICR2_EXTI4_PA ((u16)0x0000) /* PA[4] pin */ -#define AFIO_EXTICR2_EXTI4_PB ((u16)0x0001) /* PB[4] pin */ -#define AFIO_EXTICR2_EXTI4_PC ((u16)0x0002) /* PC[4] pin */ -#define AFIO_EXTICR2_EXTI4_PD ((u16)0x0003) /* PD[4] pin */ -#define AFIO_EXTICR2_EXTI4_PE ((u16)0x0004) /* PE[4] pin */ -#define AFIO_EXTICR2_EXTI4_PF ((u16)0x0005) /* PF[4] pin */ -#define AFIO_EXTICR2_EXTI4_PG ((u16)0x0006) /* PG[4] pin */ - -/* EXTI5 configuration */ -#define AFIO_EXTICR2_EXTI5_PA ((u16)0x0000) /* PA[5] pin */ -#define AFIO_EXTICR2_EXTI5_PB ((u16)0x0010) /* PB[5] pin */ -#define AFIO_EXTICR2_EXTI5_PC ((u16)0x0020) /* PC[5] pin */ -#define AFIO_EXTICR2_EXTI5_PD ((u16)0x0030) /* PD[5] pin */ -#define AFIO_EXTICR2_EXTI5_PE ((u16)0x0040) /* PE[5] pin */ -#define AFIO_EXTICR2_EXTI5_PF ((u16)0x0050) /* PF[5] pin */ -#define AFIO_EXTICR2_EXTI5_PG ((u16)0x0060) /* PG[5] pin */ - -/* EXTI6 configuration */ -#define AFIO_EXTICR2_EXTI6_PA ((u16)0x0000) /* PA[6] pin */ -#define AFIO_EXTICR2_EXTI6_PB ((u16)0x0100) /* PB[6] pin */ -#define AFIO_EXTICR2_EXTI6_PC ((u16)0x0200) /* PC[6] pin */ -#define AFIO_EXTICR2_EXTI6_PD ((u16)0x0300) /* PD[6] pin */ -#define AFIO_EXTICR2_EXTI6_PE ((u16)0x0400) /* PE[6] pin */ -#define AFIO_EXTICR2_EXTI6_PF ((u16)0x0500) /* PF[6] pin */ -#define AFIO_EXTICR2_EXTI6_PG ((u16)0x0600) /* PG[6] pin */ - -/* EXTI7 configuration */ -#define AFIO_EXTICR2_EXTI7_PA ((u16)0x0000) /* PA[7] pin */ -#define AFIO_EXTICR2_EXTI7_PB ((u16)0x1000) /* PB[7] pin */ -#define AFIO_EXTICR2_EXTI7_PC ((u16)0x2000) /* PC[7] pin */ -#define AFIO_EXTICR2_EXTI7_PD ((u16)0x3000) /* PD[7] pin */ -#define AFIO_EXTICR2_EXTI7_PE ((u16)0x4000) /* PE[7] pin */ -#define AFIO_EXTICR2_EXTI7_PF ((u16)0x5000) /* PF[7] pin */ -#define AFIO_EXTICR2_EXTI7_PG ((u16)0x6000) /* PG[7] pin */ - - -/***************** Bit definition for AFIO_EXTICR3 register *****************/ -#define AFIO_EXTICR3_EXTI8 ((u16)0x000F) /* EXTI 8 configuration */ -#define AFIO_EXTICR3_EXTI9 ((u16)0x00F0) /* EXTI 9 configuration */ -#define AFIO_EXTICR3_EXTI10 ((u16)0x0F00) /* EXTI 10 configuration */ -#define AFIO_EXTICR3_EXTI11 ((u16)0xF000) /* EXTI 11 configuration */ - -/* EXTI8 configuration */ -#define AFIO_EXTICR3_EXTI8_PA ((u16)0x0000) /* PA[8] pin */ -#define AFIO_EXTICR3_EXTI8_PB ((u16)0x0001) /* PB[8] pin */ -#define AFIO_EXTICR3_EXTI8_PC ((u16)0x0002) /* PC[8] pin */ -#define AFIO_EXTICR3_EXTI8_PD ((u16)0x0003) /* PD[8] pin */ -#define AFIO_EXTICR3_EXTI8_PE ((u16)0x0004) /* PE[8] pin */ -#define AFIO_EXTICR3_EXTI8_PF ((u16)0x0005) /* PF[8] pin */ -#define AFIO_EXTICR3_EXTI8_PG ((u16)0x0006) /* PG[8] pin */ - -/* EXTI9 configuration */ -#define AFIO_EXTICR3_EXTI9_PA ((u16)0x0000) /* PA[9] pin */ -#define AFIO_EXTICR3_EXTI9_PB ((u16)0x0010) /* PB[9] pin */ -#define AFIO_EXTICR3_EXTI9_PC ((u16)0x0020) /* PC[9] pin */ -#define AFIO_EXTICR3_EXTI9_PD ((u16)0x0030) /* PD[9] pin */ -#define AFIO_EXTICR3_EXTI9_PE ((u16)0x0040) /* PE[9] pin */ -#define AFIO_EXTICR3_EXTI9_PF ((u16)0x0050) /* PF[9] pin */ -#define AFIO_EXTICR3_EXTI9_PG ((u16)0x0060) /* PG[9] pin */ - -/* EXTI10 configuration */ -#define AFIO_EXTICR3_EXTI10_PA ((u16)0x0000) /* PA[10] pin */ -#define AFIO_EXTICR3_EXTI10_PB ((u16)0x0100) /* PB[10] pin */ -#define AFIO_EXTICR3_EXTI10_PC ((u16)0x0200) /* PC[10] pin */ -#define AFIO_EXTICR3_EXTI10_PD ((u16)0x0300) /* PD[10] pin */ -#define AFIO_EXTICR3_EXTI10_PE ((u16)0x0400) /* PE[10] pin */ -#define AFIO_EXTICR3_EXTI10_PF ((u16)0x0500) /* PF[10] pin */ -#define AFIO_EXTICR3_EXTI10_PG ((u16)0x0600) /* PG[10] pin */ - -/* EXTI11 configuration */ -#define AFIO_EXTICR3_EXTI11_PA ((u16)0x0000) /* PA[11] pin */ -#define AFIO_EXTICR3_EXTI11_PB ((u16)0x1000) /* PB[11] pin */ -#define AFIO_EXTICR3_EXTI11_PC ((u16)0x2000) /* PC[11] pin */ -#define AFIO_EXTICR3_EXTI11_PD ((u16)0x3000) /* PD[11] pin */ -#define AFIO_EXTICR3_EXTI11_PE ((u16)0x4000) /* PE[11] pin */ -#define AFIO_EXTICR3_EXTI11_PF ((u16)0x5000) /* PF[11] pin */ -#define AFIO_EXTICR3_EXTI11_PG ((u16)0x6000) /* PG[11] pin */ - - -/***************** Bit definition for AFIO_EXTICR4 register *****************/ -#define AFIO_EXTICR4_EXTI12 ((u16)0x000F) /* EXTI 12 configuration */ -#define AFIO_EXTICR4_EXTI13 ((u16)0x00F0) /* EXTI 13 configuration */ -#define AFIO_EXTICR4_EXTI14 ((u16)0x0F00) /* EXTI 14 configuration */ -#define AFIO_EXTICR4_EXTI15 ((u16)0xF000) /* EXTI 15 configuration */ - -/* EXTI12 configuration */ -#define AFIO_EXTICR4_EXTI12_PA ((u16)0x0000) /* PA[12] pin */ -#define AFIO_EXTICR4_EXTI12_PB ((u16)0x0001) /* PB[12] pin */ -#define AFIO_EXTICR4_EXTI12_PC ((u16)0x0002) /* PC[12] pin */ -#define AFIO_EXTICR4_EXTI12_PD ((u16)0x0003) /* PD[12] pin */ -#define AFIO_EXTICR4_EXTI12_PE ((u16)0x0004) /* PE[12] pin */ -#define AFIO_EXTICR4_EXTI12_PF ((u16)0x0005) /* PF[12] pin */ -#define AFIO_EXTICR4_EXTI12_PG ((u16)0x0006) /* PG[12] pin */ - -/* EXTI13 configuration */ -#define AFIO_EXTICR4_EXTI13_PA ((u16)0x0000) /* PA[13] pin */ -#define AFIO_EXTICR4_EXTI13_PB ((u16)0x0010) /* PB[13] pin */ -#define AFIO_EXTICR4_EXTI13_PC ((u16)0x0020) /* PC[13] pin */ -#define AFIO_EXTICR4_EXTI13_PD ((u16)0x0030) /* PD[13] pin */ -#define AFIO_EXTICR4_EXTI13_PE ((u16)0x0040) /* PE[13] pin */ -#define AFIO_EXTICR4_EXTI13_PF ((u16)0x0050) /* PF[13] pin */ -#define AFIO_EXTICR4_EXTI13_PG ((u16)0x0060) /* PG[13] pin */ - -/* EXTI14 configuration */ -#define AFIO_EXTICR4_EXTI14_PA ((u16)0x0000) /* PA[14] pin */ -#define AFIO_EXTICR4_EXTI14_PB ((u16)0x0100) /* PB[14] pin */ -#define AFIO_EXTICR4_EXTI14_PC ((u16)0x0200) /* PC[14] pin */ -#define AFIO_EXTICR4_EXTI14_PD ((u16)0x0300) /* PD[14] pin */ -#define AFIO_EXTICR4_EXTI14_PE ((u16)0x0400) /* PE[14] pin */ -#define AFIO_EXTICR4_EXTI14_PF ((u16)0x0500) /* PF[14] pin */ -#define AFIO_EXTICR4_EXTI14_PG ((u16)0x0600) /* PG[14] pin */ - -/* EXTI15 configuration */ -#define AFIO_EXTICR4_EXTI15_PA ((u16)0x0000) /* PA[15] pin */ -#define AFIO_EXTICR4_EXTI15_PB ((u16)0x1000) /* PB[15] pin */ -#define AFIO_EXTICR4_EXTI15_PC ((u16)0x2000) /* PC[15] pin */ -#define AFIO_EXTICR4_EXTI15_PD ((u16)0x3000) /* PD[15] pin */ -#define AFIO_EXTICR4_EXTI15_PE ((u16)0x4000) /* PE[15] pin */ -#define AFIO_EXTICR4_EXTI15_PF ((u16)0x5000) /* PF[15] pin */ -#define AFIO_EXTICR4_EXTI15_PG ((u16)0x6000) /* PG[15] pin */ - - - -/******************************************************************************/ -/* */ -/* SystemTick */ -/* */ -/******************************************************************************/ - -/***************** Bit definition for SysTick_CTRL register *****************/ -#define SysTick_CTRL_ENABLE ((u32)0x00000001) /* Counter enable */ -#define SysTick_CTRL_TICKINT ((u32)0x00000002) /* Counting down to 0 pends the SysTick handler */ -#define SysTick_CTRL_CLKSOURCE ((u32)0x00000004) /* Clock source */ -#define SysTick_CTRL_COUNTFLAG ((u32)0x00010000) /* Count Flag */ - - -/***************** Bit definition for SysTick_LOAD register *****************/ -#define SysTick_LOAD_RELOAD ((u32)0x00FFFFFF) /* Value to load into the SysTick Current Value Register when the counter reaches 0 */ - - -/***************** Bit definition for SysTick_VAL register ******************/ -#define SysTick_VAL_CURRENT ((u32)0x00FFFFFF) /* Current value at the time the register is accessed */ - - -/***************** Bit definition for SysTick_CALIB register ****************/ -#define SysTick_CALIB_TENMS ((u32)0x00FFFFFF) /* Reload value to use for 10ms timing */ -#define SysTick_CALIB_SKEW ((u32)0x40000000) /* Calibration value is not exactly 10 ms */ -#define SysTick_CALIB_NOREF ((u32)0x80000000) /* The reference clock is not provided */ - - - -/******************************************************************************/ -/* */ -/* Nested Vectored Interrupt Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for NVIC_ISER register *******************/ -#define NVIC_ISER_SETENA ((u32)0xFFFFFFFF) /* Interrupt set enable bits */ -#define NVIC_ISER_SETENA_0 ((u32)0x00000001) /* bit 0 */ -#define NVIC_ISER_SETENA_1 ((u32)0x00000002) /* bit 1 */ -#define NVIC_ISER_SETENA_2 ((u32)0x00000004) /* bit 2 */ -#define NVIC_ISER_SETENA_3 ((u32)0x00000008) /* bit 3 */ -#define NVIC_ISER_SETENA_4 ((u32)0x00000010) /* bit 4 */ -#define NVIC_ISER_SETENA_5 ((u32)0x00000020) /* bit 5 */ -#define NVIC_ISER_SETENA_6 ((u32)0x00000040) /* bit 6 */ -#define NVIC_ISER_SETENA_7 ((u32)0x00000080) /* bit 7 */ -#define NVIC_ISER_SETENA_8 ((u32)0x00000100) /* bit 8 */ -#define NVIC_ISER_SETENA_9 ((u32)0x00000200) /* bit 9 */ -#define NVIC_ISER_SETENA_10 ((u32)0x00000400) /* bit 10 */ -#define NVIC_ISER_SETENA_11 ((u32)0x00000800) /* bit 11 */ -#define NVIC_ISER_SETENA_12 ((u32)0x00001000) /* bit 12 */ -#define NVIC_ISER_SETENA_13 ((u32)0x00002000) /* bit 13 */ -#define NVIC_ISER_SETENA_14 ((u32)0x00004000) /* bit 14 */ -#define NVIC_ISER_SETENA_15 ((u32)0x00008000) /* bit 15 */ -#define NVIC_ISER_SETENA_16 ((u32)0x00010000) /* bit 16 */ -#define NVIC_ISER_SETENA_17 ((u32)0x00020000) /* bit 17 */ -#define NVIC_ISER_SETENA_18 ((u32)0x00040000) /* bit 18 */ -#define NVIC_ISER_SETENA_19 ((u32)0x00080000) /* bit 19 */ -#define NVIC_ISER_SETENA_20 ((u32)0x00100000) /* bit 20 */ -#define NVIC_ISER_SETENA_21 ((u32)0x00200000) /* bit 21 */ -#define NVIC_ISER_SETENA_22 ((u32)0x00400000) /* bit 22 */ -#define NVIC_ISER_SETENA_23 ((u32)0x00800000) /* bit 23 */ -#define NVIC_ISER_SETENA_24 ((u32)0x01000000) /* bit 24 */ -#define NVIC_ISER_SETENA_25 ((u32)0x02000000) /* bit 25 */ -#define NVIC_ISER_SETENA_26 ((u32)0x04000000) /* bit 26 */ -#define NVIC_ISER_SETENA_27 ((u32)0x08000000) /* bit 27 */ -#define NVIC_ISER_SETENA_28 ((u32)0x10000000) /* bit 28 */ -#define NVIC_ISER_SETENA_29 ((u32)0x20000000) /* bit 29 */ -#define NVIC_ISER_SETENA_30 ((u32)0x40000000) /* bit 30 */ -#define NVIC_ISER_SETENA_31 ((u32)0x80000000) /* bit 31 */ - - - -/****************** Bit definition for NVIC_ICER register *******************/ -#define NVIC_ICER_CLRENA ((u32)0xFFFFFFFF) /* Interrupt clear-enable bits */ -#define NVIC_ICER_CLRENA_0 ((u32)0x00000001) /* bit 0 */ -#define NVIC_ICER_CLRENA_1 ((u32)0x00000002) /* bit 1 */ -#define NVIC_ICER_CLRENA_2 ((u32)0x00000004) /* bit 2 */ -#define NVIC_ICER_CLRENA_3 ((u32)0x00000008) /* bit 3 */ -#define NVIC_ICER_CLRENA_4 ((u32)0x00000010) /* bit 4 */ -#define NVIC_ICER_CLRENA_5 ((u32)0x00000020) /* bit 5 */ -#define NVIC_ICER_CLRENA_6 ((u32)0x00000040) /* bit 6 */ -#define NVIC_ICER_CLRENA_7 ((u32)0x00000080) /* bit 7 */ -#define NVIC_ICER_CLRENA_8 ((u32)0x00000100) /* bit 8 */ -#define NVIC_ICER_CLRENA_9 ((u32)0x00000200) /* bit 9 */ -#define NVIC_ICER_CLRENA_10 ((u32)0x00000400) /* bit 10 */ -#define NVIC_ICER_CLRENA_11 ((u32)0x00000800) /* bit 11 */ -#define NVIC_ICER_CLRENA_12 ((u32)0x00001000) /* bit 12 */ -#define NVIC_ICER_CLRENA_13 ((u32)0x00002000) /* bit 13 */ -#define NVIC_ICER_CLRENA_14 ((u32)0x00004000) /* bit 14 */ -#define NVIC_ICER_CLRENA_15 ((u32)0x00008000) /* bit 15 */ -#define NVIC_ICER_CLRENA_16 ((u32)0x00010000) /* bit 16 */ -#define NVIC_ICER_CLRENA_17 ((u32)0x00020000) /* bit 17 */ -#define NVIC_ICER_CLRENA_18 ((u32)0x00040000) /* bit 18 */ -#define NVIC_ICER_CLRENA_19 ((u32)0x00080000) /* bit 19 */ -#define NVIC_ICER_CLRENA_20 ((u32)0x00100000) /* bit 20 */ -#define NVIC_ICER_CLRENA_21 ((u32)0x00200000) /* bit 21 */ -#define NVIC_ICER_CLRENA_22 ((u32)0x00400000) /* bit 22 */ -#define NVIC_ICER_CLRENA_23 ((u32)0x00800000) /* bit 23 */ -#define NVIC_ICER_CLRENA_24 ((u32)0x01000000) /* bit 24 */ -#define NVIC_ICER_CLRENA_25 ((u32)0x02000000) /* bit 25 */ -#define NVIC_ICER_CLRENA_26 ((u32)0x04000000) /* bit 26 */ -#define NVIC_ICER_CLRENA_27 ((u32)0x08000000) /* bit 27 */ -#define NVIC_ICER_CLRENA_28 ((u32)0x10000000) /* bit 28 */ -#define NVIC_ICER_CLRENA_29 ((u32)0x20000000) /* bit 29 */ -#define NVIC_ICER_CLRENA_30 ((u32)0x40000000) /* bit 30 */ -#define NVIC_ICER_CLRENA_31 ((u32)0x80000000) /* bit 31 */ - - -/****************** Bit definition for NVIC_ISPR register *******************/ -#define NVIC_ISPR_SETPEND ((u32)0xFFFFFFFF) /* Interrupt set-pending bits */ -#define NVIC_ISPR_SETPEND_0 ((u32)0x00000001) /* bit 0 */ -#define NVIC_ISPR_SETPEND_1 ((u32)0x00000002) /* bit 1 */ -#define NVIC_ISPR_SETPEND_2 ((u32)0x00000004) /* bit 2 */ -#define NVIC_ISPR_SETPEND_3 ((u32)0x00000008) /* bit 3 */ -#define NVIC_ISPR_SETPEND_4 ((u32)0x00000010) /* bit 4 */ -#define NVIC_ISPR_SETPEND_5 ((u32)0x00000020) /* bit 5 */ -#define NVIC_ISPR_SETPEND_6 ((u32)0x00000040) /* bit 6 */ -#define NVIC_ISPR_SETPEND_7 ((u32)0x00000080) /* bit 7 */ -#define NVIC_ISPR_SETPEND_8 ((u32)0x00000100) /* bit 8 */ -#define NVIC_ISPR_SETPEND_9 ((u32)0x00000200) /* bit 9 */ -#define NVIC_ISPR_SETPEND_10 ((u32)0x00000400) /* bit 10 */ -#define NVIC_ISPR_SETPEND_11 ((u32)0x00000800) /* bit 11 */ -#define NVIC_ISPR_SETPEND_12 ((u32)0x00001000) /* bit 12 */ -#define NVIC_ISPR_SETPEND_13 ((u32)0x00002000) /* bit 13 */ -#define NVIC_ISPR_SETPEND_14 ((u32)0x00004000) /* bit 14 */ -#define NVIC_ISPR_SETPEND_15 ((u32)0x00008000) /* bit 15 */ -#define NVIC_ISPR_SETPEND_16 ((u32)0x00010000) /* bit 16 */ -#define NVIC_ISPR_SETPEND_17 ((u32)0x00020000) /* bit 17 */ -#define NVIC_ISPR_SETPEND_18 ((u32)0x00040000) /* bit 18 */ -#define NVIC_ISPR_SETPEND_19 ((u32)0x00080000) /* bit 19 */ -#define NVIC_ISPR_SETPEND_20 ((u32)0x00100000) /* bit 20 */ -#define NVIC_ISPR_SETPEND_21 ((u32)0x00200000) /* bit 21 */ -#define NVIC_ISPR_SETPEND_22 ((u32)0x00400000) /* bit 22 */ -#define NVIC_ISPR_SETPEND_23 ((u32)0x00800000) /* bit 23 */ -#define NVIC_ISPR_SETPEND_24 ((u32)0x01000000) /* bit 24 */ -#define NVIC_ISPR_SETPEND_25 ((u32)0x02000000) /* bit 25 */ -#define NVIC_ISPR_SETPEND_26 ((u32)0x04000000) /* bit 26 */ -#define NVIC_ISPR_SETPEND_27 ((u32)0x08000000) /* bit 27 */ -#define NVIC_ISPR_SETPEND_28 ((u32)0x10000000) /* bit 28 */ -#define NVIC_ISPR_SETPEND_29 ((u32)0x20000000) /* bit 29 */ -#define NVIC_ISPR_SETPEND_30 ((u32)0x40000000) /* bit 30 */ -#define NVIC_ISPR_SETPEND_31 ((u32)0x80000000) /* bit 31 */ - - -/****************** Bit definition for NVIC_ICPR register *******************/ -#define NVIC_ICPR_CLRPEND ((u32)0xFFFFFFFF) /* Interrupt clear-pending bits */ -#define NVIC_ICPR_CLRPEND_0 ((u32)0x00000001) /* bit 0 */ -#define NVIC_ICPR_CLRPEND_1 ((u32)0x00000002) /* bit 1 */ -#define NVIC_ICPR_CLRPEND_2 ((u32)0x00000004) /* bit 2 */ -#define NVIC_ICPR_CLRPEND_3 ((u32)0x00000008) /* bit 3 */ -#define NVIC_ICPR_CLRPEND_4 ((u32)0x00000010) /* bit 4 */ -#define NVIC_ICPR_CLRPEND_5 ((u32)0x00000020) /* bit 5 */ -#define NVIC_ICPR_CLRPEND_6 ((u32)0x00000040) /* bit 6 */ -#define NVIC_ICPR_CLRPEND_7 ((u32)0x00000080) /* bit 7 */ -#define NVIC_ICPR_CLRPEND_8 ((u32)0x00000100) /* bit 8 */ -#define NVIC_ICPR_CLRPEND_9 ((u32)0x00000200) /* bit 9 */ -#define NVIC_ICPR_CLRPEND_10 ((u32)0x00000400) /* bit 10 */ -#define NVIC_ICPR_CLRPEND_11 ((u32)0x00000800) /* bit 11 */ -#define NVIC_ICPR_CLRPEND_12 ((u32)0x00001000) /* bit 12 */ -#define NVIC_ICPR_CLRPEND_13 ((u32)0x00002000) /* bit 13 */ -#define NVIC_ICPR_CLRPEND_14 ((u32)0x00004000) /* bit 14 */ -#define NVIC_ICPR_CLRPEND_15 ((u32)0x00008000) /* bit 15 */ -#define NVIC_ICPR_CLRPEND_16 ((u32)0x00010000) /* bit 16 */ -#define NVIC_ICPR_CLRPEND_17 ((u32)0x00020000) /* bit 17 */ -#define NVIC_ICPR_CLRPEND_18 ((u32)0x00040000) /* bit 18 */ -#define NVIC_ICPR_CLRPEND_19 ((u32)0x00080000) /* bit 19 */ -#define NVIC_ICPR_CLRPEND_20 ((u32)0x00100000) /* bit 20 */ -#define NVIC_ICPR_CLRPEND_21 ((u32)0x00200000) /* bit 21 */ -#define NVIC_ICPR_CLRPEND_22 ((u32)0x00400000) /* bit 22 */ -#define NVIC_ICPR_CLRPEND_23 ((u32)0x00800000) /* bit 23 */ -#define NVIC_ICPR_CLRPEND_24 ((u32)0x01000000) /* bit 24 */ -#define NVIC_ICPR_CLRPEND_25 ((u32)0x02000000) /* bit 25 */ -#define NVIC_ICPR_CLRPEND_26 ((u32)0x04000000) /* bit 26 */ -#define NVIC_ICPR_CLRPEND_27 ((u32)0x08000000) /* bit 27 */ -#define NVIC_ICPR_CLRPEND_28 ((u32)0x10000000) /* bit 28 */ -#define NVIC_ICPR_CLRPEND_29 ((u32)0x20000000) /* bit 29 */ -#define NVIC_ICPR_CLRPEND_30 ((u32)0x40000000) /* bit 30 */ -#define NVIC_ICPR_CLRPEND_31 ((u32)0x80000000) /* bit 31 */ - - -/****************** Bit definition for NVIC_IABR register *******************/ -#define NVIC_IABR_ACTIVE ((u32)0xFFFFFFFF) /* Interrupt active flags */ -#define NVIC_IABR_ACTIVE_0 ((u32)0x00000001) /* bit 0 */ -#define NVIC_IABR_ACTIVE_1 ((u32)0x00000002) /* bit 1 */ -#define NVIC_IABR_ACTIVE_2 ((u32)0x00000004) /* bit 2 */ -#define NVIC_IABR_ACTIVE_3 ((u32)0x00000008) /* bit 3 */ -#define NVIC_IABR_ACTIVE_4 ((u32)0x00000010) /* bit 4 */ -#define NVIC_IABR_ACTIVE_5 ((u32)0x00000020) /* bit 5 */ -#define NVIC_IABR_ACTIVE_6 ((u32)0x00000040) /* bit 6 */ -#define NVIC_IABR_ACTIVE_7 ((u32)0x00000080) /* bit 7 */ -#define NVIC_IABR_ACTIVE_8 ((u32)0x00000100) /* bit 8 */ -#define NVIC_IABR_ACTIVE_9 ((u32)0x00000200) /* bit 9 */ -#define NVIC_IABR_ACTIVE_10 ((u32)0x00000400) /* bit 10 */ -#define NVIC_IABR_ACTIVE_11 ((u32)0x00000800) /* bit 11 */ -#define NVIC_IABR_ACTIVE_12 ((u32)0x00001000) /* bit 12 */ -#define NVIC_IABR_ACTIVE_13 ((u32)0x00002000) /* bit 13 */ -#define NVIC_IABR_ACTIVE_14 ((u32)0x00004000) /* bit 14 */ -#define NVIC_IABR_ACTIVE_15 ((u32)0x00008000) /* bit 15 */ -#define NVIC_IABR_ACTIVE_16 ((u32)0x00010000) /* bit 16 */ -#define NVIC_IABR_ACTIVE_17 ((u32)0x00020000) /* bit 17 */ -#define NVIC_IABR_ACTIVE_18 ((u32)0x00040000) /* bit 18 */ -#define NVIC_IABR_ACTIVE_19 ((u32)0x00080000) /* bit 19 */ -#define NVIC_IABR_ACTIVE_20 ((u32)0x00100000) /* bit 20 */ -#define NVIC_IABR_ACTIVE_21 ((u32)0x00200000) /* bit 21 */ -#define NVIC_IABR_ACTIVE_22 ((u32)0x00400000) /* bit 22 */ -#define NVIC_IABR_ACTIVE_23 ((u32)0x00800000) /* bit 23 */ -#define NVIC_IABR_ACTIVE_24 ((u32)0x01000000) /* bit 24 */ -#define NVIC_IABR_ACTIVE_25 ((u32)0x02000000) /* bit 25 */ -#define NVIC_IABR_ACTIVE_26 ((u32)0x04000000) /* bit 26 */ -#define NVIC_IABR_ACTIVE_27 ((u32)0x08000000) /* bit 27 */ -#define NVIC_IABR_ACTIVE_28 ((u32)0x10000000) /* bit 28 */ -#define NVIC_IABR_ACTIVE_29 ((u32)0x20000000) /* bit 29 */ -#define NVIC_IABR_ACTIVE_30 ((u32)0x40000000) /* bit 30 */ -#define NVIC_IABR_ACTIVE_31 ((u32)0x80000000) /* bit 31 */ - - -/****************** Bit definition for NVIC_PRI0 register *******************/ -#define NVIC_IPR0_PRI_0 ((u32)0x000000FF) /* Priority of interrupt 0 */ -#define NVIC_IPR0_PRI_1 ((u32)0x0000FF00) /* Priority of interrupt 1 */ -#define NVIC_IPR0_PRI_2 ((u32)0x00FF0000) /* Priority of interrupt 2 */ -#define NVIC_IPR0_PRI_3 ((u32)0xFF000000) /* Priority of interrupt 3 */ - - -/****************** Bit definition for NVIC_PRI1 register *******************/ -#define NVIC_IPR1_PRI_4 ((u32)0x000000FF) /* Priority of interrupt 4 */ -#define NVIC_IPR1_PRI_5 ((u32)0x0000FF00) /* Priority of interrupt 5 */ -#define NVIC_IPR1_PRI_6 ((u32)0x00FF0000) /* Priority of interrupt 6 */ -#define NVIC_IPR1_PRI_7 ((u32)0xFF000000) /* Priority of interrupt 7 */ - - -/****************** Bit definition for NVIC_PRI2 register *******************/ -#define NVIC_IPR2_PRI_8 ((u32)0x000000FF) /* Priority of interrupt 8 */ -#define NVIC_IPR2_PRI_9 ((u32)0x0000FF00) /* Priority of interrupt 9 */ -#define NVIC_IPR2_PRI_10 ((u32)0x00FF0000) /* Priority of interrupt 10 */ -#define NVIC_IPR2_PRI_11 ((u32)0xFF000000) /* Priority of interrupt 11 */ - - -/****************** Bit definition for NVIC_PRI3 register *******************/ -#define NVIC_IPR3_PRI_12 ((u32)0x000000FF) /* Priority of interrupt 12 */ -#define NVIC_IPR3_PRI_13 ((u32)0x0000FF00) /* Priority of interrupt 13 */ -#define NVIC_IPR3_PRI_14 ((u32)0x00FF0000) /* Priority of interrupt 14 */ -#define NVIC_IPR3_PRI_15 ((u32)0xFF000000) /* Priority of interrupt 15 */ - - -/****************** Bit definition for NVIC_PRI4 register *******************/ -#define NVIC_IPR4_PRI_16 ((u32)0x000000FF) /* Priority of interrupt 16 */ -#define NVIC_IPR4_PRI_17 ((u32)0x0000FF00) /* Priority of interrupt 17 */ -#define NVIC_IPR4_PRI_18 ((u32)0x00FF0000) /* Priority of interrupt 18 */ -#define NVIC_IPR4_PRI_19 ((u32)0xFF000000) /* Priority of interrupt 19 */ - - -/****************** Bit definition for NVIC_PRI5 register *******************/ -#define NVIC_IPR5_PRI_20 ((u32)0x000000FF) /* Priority of interrupt 20 */ -#define NVIC_IPR5_PRI_21 ((u32)0x0000FF00) /* Priority of interrupt 21 */ -#define NVIC_IPR5_PRI_22 ((u32)0x00FF0000) /* Priority of interrupt 22 */ -#define NVIC_IPR5_PRI_23 ((u32)0xFF000000) /* Priority of interrupt 23 */ - - -/****************** Bit definition for NVIC_PRI6 register *******************/ -#define NVIC_IPR6_PRI_24 ((u32)0x000000FF) /* Priority of interrupt 24 */ -#define NVIC_IPR6_PRI_25 ((u32)0x0000FF00) /* Priority of interrupt 25 */ -#define NVIC_IPR6_PRI_26 ((u32)0x00FF0000) /* Priority of interrupt 26 */ -#define NVIC_IPR6_PRI_27 ((u32)0xFF000000) /* Priority of interrupt 27 */ - - -/****************** Bit definition for NVIC_PRI7 register *******************/ -#define NVIC_IPR7_PRI_28 ((u32)0x000000FF) /* Priority of interrupt 28 */ -#define NVIC_IPR7_PRI_29 ((u32)0x0000FF00) /* Priority of interrupt 29 */ -#define NVIC_IPR7_PRI_30 ((u32)0x00FF0000) /* Priority of interrupt 30 */ -#define NVIC_IPR7_PRI_31 ((u32)0xFF000000) /* Priority of interrupt 31 */ - - -/****************** Bit definition for SCB_CPUID register *******************/ -#define SCB_CPUID_REVISION ((u32)0x0000000F) /* Implementation defined revision number */ -#define SCB_CPUID_PARTNO ((u32)0x0000FFF0) /* Number of processor within family */ -#define SCB_CPUID_Constant ((u32)0x000F0000) /* Reads as 0x0F */ -#define SCB_CPUID_VARIANT ((u32)0x00F00000) /* Implementation defined variant number */ -#define SCB_CPUID_IMPLEMENTER ((u32)0xFF000000) /* Implementer code. ARM is 0x41 */ - - -/******************* Bit definition for SCB_ICSR register *******************/ -#define SCB_ICSR_VECTACTIVE ((u32)0x000001FF) /* Active ISR number field */ -#define SCB_ICSR_RETTOBASE ((u32)0x00000800) /* All active exceptions minus the IPSR_current_exception yields the empty set */ -#define SCB_ICSR_VECTPENDING ((u32)0x003FF000) /* Pending ISR number field */ -#define SCB_ICSR_ISRPENDING ((u32)0x00400000) /* Interrupt pending flag */ -#define SCB_ICSR_ISRPREEMPT ((u32)0x00800000) /* It indicates that a pending interrupt becomes active in the next running cycle */ -#define SCB_ICSR_PENDSTCLR ((u32)0x02000000) /* Clear pending SysTick bit */ -#define SCB_ICSR_PENDSTSET ((u32)0x04000000) /* Set pending SysTick bit */ -#define SCB_ICSR_PENDSVCLR ((u32)0x08000000) /* Clear pending pendSV bit */ -#define SCB_ICSR_PENDSVSET ((u32)0x10000000) /* Set pending pendSV bit */ -#define SCB_ICSR_NMIPENDSET ((u32)0x80000000) /* Set pending NMI bit */ - - -/******************* Bit definition for SCB_VTOR register *******************/ -#define SCB_VTOR_TBLOFF ((u32)0x1FFFFF80) /* Vector table base offset field */ -#define SCB_VTOR_TBLBASE ((u32)0x20000000) /* Table base in code(0) or RAM(1) */ - - -/****************** Bit definition for SCB_AIRCR register *******************/ -#define SCB_AIRCR_VECTRESET ((u32)0x00000001) /* System Reset bit */ -#define SCB_AIRCR_VECTCLRACTIVE ((u32)0x00000002) /* Clear active vector bit */ -#define SCB_AIRCR_SYSRESETREQ ((u32)0x00000004) /* Requests chip control logic to generate a reset */ - -#define SCB_AIRCR_PRIGROUP ((u32)0x00000700) /* PRIGROUP[2:0] bits (Priority group) */ -#define SCB_AIRCR_PRIGROUP_0 ((u32)0x00000100) /* Bit 0 */ -#define SCB_AIRCR_PRIGROUP_1 ((u32)0x00000200) /* Bit 1 */ -#define SCB_AIRCR_PRIGROUP_2 ((u32)0x00000400) /* Bit 2 */ - -/* prority group configuration */ -#define SCB_AIRCR_PRIGROUP0 ((u32)0x00000000) /* Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ -#define SCB_AIRCR_PRIGROUP1 ((u32)0x00000100) /* Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP2 ((u32)0x00000200) /* Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP3 ((u32)0x00000300) /* Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP4 ((u32)0x00000400) /* Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP5 ((u32)0x00000500) /* Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP6 ((u32)0x00000600) /* Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP7 ((u32)0x00000700) /* Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ - -#define SCB_AIRCR_ENDIANESS ((u32)0x00008000) /* Data endianness bit */ -#define SCB_AIRCR_VECTKEY ((u32)0xFFFF0000) /* Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ - - -/******************* Bit definition for SCB_SCR register ********************/ -#define SCB_SCR_SLEEPONEXIT ((u8)0x02) /* Sleep on exit bit */ -#define SCB_SCR_SLEEPDEEP ((u8)0x04) /* Sleep deep bit */ -#define SCB_SCR_SEVONPEND ((u8)0x10) /* Wake up from WFE */ - - -/******************** Bit definition for SCB_CCR register *******************/ -#define SCB_CCR_NONBASETHRDENA ((u16)0x0001) /* Thread mode can be entered from any level in Handler mode by controlled return value */ -#define SCB_CCR_USERSETMPEND ((u16)0x0002) /* Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ -#define SCB_CCR_UNALIGN_TRP ((u16)0x0008) /* Trap for unaligned access */ -#define SCB_CCR_DIV_0_TRP ((u16)0x0010) /* Trap on Divide by 0 */ -#define SCB_CCR_BFHFNMIGN ((u16)0x0100) /* Handlers running at priority -1 and -2 */ -#define SCB_CCR_STKALIGN ((u16)0x0200) /* On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ - - -/******************* Bit definition for SCB_SHPR register ********************/ -#define SCB_SHPR_PRI_N ((u32)0x000000FF) /* Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ -#define SCB_SHPR_PRI_N1 ((u32)0x0000FF00) /* Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ -#define SCB_SHPR_PRI_N2 ((u32)0x00FF0000) /* Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ -#define SCB_SHPR_PRI_N3 ((u32)0xFF000000) /* Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ - - -/****************** Bit definition for SCB_SHCSR register *******************/ -#define SCB_SHCSR_MEMFAULTACT ((u32)0x00000001) /* MemManage is active */ -#define SCB_SHCSR_BUSFAULTACT ((u32)0x00000002) /* BusFault is active */ -#define SCB_SHCSR_USGFAULTACT ((u32)0x00000008) /* UsageFault is active */ -#define SCB_SHCSR_SVCALLACT ((u32)0x00000080) /* SVCall is active */ -#define SCB_SHCSR_MONITORACT ((u32)0x00000100) /* Monitor is active */ -#define SCB_SHCSR_PENDSVACT ((u32)0x00000400) /* PendSV is active */ -#define SCB_SHCSR_SYSTICKACT ((u32)0x00000800) /* SysTick is active */ -#define SCB_SHCSR_USGFAULTPENDED ((u32)0x00001000) /* Usage Fault is pended */ -#define SCB_SHCSR_MEMFAULTPENDED ((u32)0x00002000) /* MemManage is pended */ -#define SCB_SHCSR_BUSFAULTPENDED ((u32)0x00004000) /* Bus Fault is pended */ -#define SCB_SHCSR_SVCALLPENDED ((u32)0x00008000) /* SVCall is pended */ -#define SCB_SHCSR_MEMFAULTENA ((u32)0x00010000) /* MemManage enable */ -#define SCB_SHCSR_BUSFAULTENA ((u32)0x00020000) /* Bus Fault enable */ -#define SCB_SHCSR_USGFAULTENA ((u32)0x00040000) /* UsageFault enable */ - - -/******************* Bit definition for SCB_CFSR register *******************/ -/* MFSR */ -#define SCB_CFSR_IACCVIOL ((u32)0x00000001) /* Instruction access violation */ -#define SCB_CFSR_DACCVIOL ((u32)0x00000002) /* Data access violation */ -#define SCB_CFSR_MUNSTKERR ((u32)0x00000008) /* Unstacking error */ -#define SCB_CFSR_MSTKERR ((u32)0x00000010) /* Stacking error */ -#define SCB_CFSR_MMARVALID ((u32)0x00000080) /* Memory Manage Address Register address valid flag */ -/* BFSR */ -#define SCB_CFSR_IBUSERR ((u32)0x00000100) /* Instruction bus error flag */ -#define SCB_CFSR_PRECISERR ((u32)0x00000200) /* Precise data bus error */ -#define SCB_CFSR_IMPRECISERR ((u32)0x00000400) /* Imprecise data bus error */ -#define SCB_CFSR_UNSTKERR ((u32)0x00000800) /* Unstacking error */ -#define SCB_CFSR_STKERR ((u32)0x00001000) /* Stacking error */ -#define SCB_CFSR_BFARVALID ((u32)0x00008000) /* Bus Fault Address Register address valid flag */ -/* UFSR */ -#define SCB_CFSR_UNDEFINSTR ((u32)0x00010000) /* The processor attempt to excecute an undefined instruction */ -#define SCB_CFSR_INVSTATE ((u32)0x00020000) /* Invalid combination of EPSR and instruction */ -#define SCB_CFSR_INVPC ((u32)0x00040000) /* Attempt to load EXC_RETURN into pc illegally */ -#define SCB_CFSR_NOCP ((u32)0x00080000) /* Attempt to use a coprocessor instruction */ -#define SCB_CFSR_UNALIGNED ((u32)0x01000000) /* Fault occurs when there is an attempt to make an unaligned memory access */ -#define SCB_CFSR_DIVBYZERO ((u32)0x02000000) /* Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ - - -/******************* Bit definition for SCB_HFSR register *******************/ -#define SCB_HFSR_VECTTBL ((u32)0x00000002) /* Fault occures because of vector table read on exception processing */ -#define SCB_HFSR_FORCED ((u32)0x40000000) /* Hard Fault activated when a configurable Fault was received and cannot activate */ -#define SCB_HFSR_DEBUGEVT ((u32)0x80000000) /* Fault related to debug */ - - -/******************* Bit definition for SCB_DFSR register *******************/ -#define SCB_DFSR_HALTED ((u8)0x01) /* Halt request flag */ -#define SCB_DFSR_BKPT ((u8)0x02) /* BKPT flag */ -#define SCB_DFSR_DWTTRAP ((u8)0x04) /* Data Watchpoint and Trace (DWT) flag */ -#define SCB_DFSR_VCATCH ((u8)0x08) /* Vector catch flag */ -#define SCB_DFSR_EXTERNAL ((u8)0x10) /* External debug request flag */ - - -/******************* Bit definition for SCB_MMFAR register ******************/ -#define SCB_MMFAR_ADDRESS ((u32)0xFFFFFFFF) /* Mem Manage fault address field */ - - -/******************* Bit definition for SCB_BFAR register *******************/ -#define SCB_BFAR_ADDRESS ((u32)0xFFFFFFFF) /* Bus fault address field */ - - -/******************* Bit definition for SCB_afsr register *******************/ -#define SCB_AFSR_IMPDEF ((u32)0xFFFFFFFF) /* Implementation defined */ - - - -/******************************************************************************/ -/* */ -/* External Interrupt/Event Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for EXTI_IMR register *******************/ -#define EXTI_IMR_MR0 ((u32)0x00000001) /* Interrupt Mask on line 0 */ -#define EXTI_IMR_MR1 ((u32)0x00000002) /* Interrupt Mask on line 1 */ -#define EXTI_IMR_MR2 ((u32)0x00000004) /* Interrupt Mask on line 2 */ -#define EXTI_IMR_MR3 ((u32)0x00000008) /* Interrupt Mask on line 3 */ -#define EXTI_IMR_MR4 ((u32)0x00000010) /* Interrupt Mask on line 4 */ -#define EXTI_IMR_MR5 ((u32)0x00000020) /* Interrupt Mask on line 5 */ -#define EXTI_IMR_MR6 ((u32)0x00000040) /* Interrupt Mask on line 6 */ -#define EXTI_IMR_MR7 ((u32)0x00000080) /* Interrupt Mask on line 7 */ -#define EXTI_IMR_MR8 ((u32)0x00000100) /* Interrupt Mask on line 8 */ -#define EXTI_IMR_MR9 ((u32)0x00000200) /* Interrupt Mask on line 9 */ -#define EXTI_IMR_MR10 ((u32)0x00000400) /* Interrupt Mask on line 10 */ -#define EXTI_IMR_MR11 ((u32)0x00000800) /* Interrupt Mask on line 11 */ -#define EXTI_IMR_MR12 ((u32)0x00001000) /* Interrupt Mask on line 12 */ -#define EXTI_IMR_MR13 ((u32)0x00002000) /* Interrupt Mask on line 13 */ -#define EXTI_IMR_MR14 ((u32)0x00004000) /* Interrupt Mask on line 14 */ -#define EXTI_IMR_MR15 ((u32)0x00008000) /* Interrupt Mask on line 15 */ -#define EXTI_IMR_MR16 ((u32)0x00010000) /* Interrupt Mask on line 16 */ -#define EXTI_IMR_MR17 ((u32)0x00020000) /* Interrupt Mask on line 17 */ -#define EXTI_IMR_MR18 ((u32)0x00040000) /* Interrupt Mask on line 18 */ - - -/******************* Bit definition for EXTI_EMR register *******************/ -#define EXTI_EMR_MR0 ((u32)0x00000001) /* Event Mask on line 0 */ -#define EXTI_EMR_MR1 ((u32)0x00000002) /* Event Mask on line 1 */ -#define EXTI_EMR_MR2 ((u32)0x00000004) /* Event Mask on line 2 */ -#define EXTI_EMR_MR3 ((u32)0x00000008) /* Event Mask on line 3 */ -#define EXTI_EMR_MR4 ((u32)0x00000010) /* Event Mask on line 4 */ -#define EXTI_EMR_MR5 ((u32)0x00000020) /* Event Mask on line 5 */ -#define EXTI_EMR_MR6 ((u32)0x00000040) /* Event Mask on line 6 */ -#define EXTI_EMR_MR7 ((u32)0x00000080) /* Event Mask on line 7 */ -#define EXTI_EMR_MR8 ((u32)0x00000100) /* Event Mask on line 8 */ -#define EXTI_EMR_MR9 ((u32)0x00000200) /* Event Mask on line 9 */ -#define EXTI_EMR_MR10 ((u32)0x00000400) /* Event Mask on line 10 */ -#define EXTI_EMR_MR11 ((u32)0x00000800) /* Event Mask on line 11 */ -#define EXTI_EMR_MR12 ((u32)0x00001000) /* Event Mask on line 12 */ -#define EXTI_EMR_MR13 ((u32)0x00002000) /* Event Mask on line 13 */ -#define EXTI_EMR_MR14 ((u32)0x00004000) /* Event Mask on line 14 */ -#define EXTI_EMR_MR15 ((u32)0x00008000) /* Event Mask on line 15 */ -#define EXTI_EMR_MR16 ((u32)0x00010000) /* Event Mask on line 16 */ -#define EXTI_EMR_MR17 ((u32)0x00020000) /* Event Mask on line 17 */ -#define EXTI_EMR_MR18 ((u32)0x00040000) /* Event Mask on line 18 */ - - -/****************** Bit definition for EXTI_RTSR register *******************/ -#define EXTI_RTSR_TR0 ((u32)0x00000001) /* Rising trigger event configuration bit of line 0 */ -#define EXTI_RTSR_TR1 ((u32)0x00000002) /* Rising trigger event configuration bit of line 1 */ -#define EXTI_RTSR_TR2 ((u32)0x00000004) /* Rising trigger event configuration bit of line 2 */ -#define EXTI_RTSR_TR3 ((u32)0x00000008) /* Rising trigger event configuration bit of line 3 */ -#define EXTI_RTSR_TR4 ((u32)0x00000010) /* Rising trigger event configuration bit of line 4 */ -#define EXTI_RTSR_TR5 ((u32)0x00000020) /* Rising trigger event configuration bit of line 5 */ -#define EXTI_RTSR_TR6 ((u32)0x00000040) /* Rising trigger event configuration bit of line 6 */ -#define EXTI_RTSR_TR7 ((u32)0x00000080) /* Rising trigger event configuration bit of line 7 */ -#define EXTI_RTSR_TR8 ((u32)0x00000100) /* Rising trigger event configuration bit of line 8 */ -#define EXTI_RTSR_TR9 ((u32)0x00000200) /* Rising trigger event configuration bit of line 9 */ -#define EXTI_RTSR_TR10 ((u32)0x00000400) /* Rising trigger event configuration bit of line 10 */ -#define EXTI_RTSR_TR11 ((u32)0x00000800) /* Rising trigger event configuration bit of line 11 */ -#define EXTI_RTSR_TR12 ((u32)0x00001000) /* Rising trigger event configuration bit of line 12 */ -#define EXTI_RTSR_TR13 ((u32)0x00002000) /* Rising trigger event configuration bit of line 13 */ -#define EXTI_RTSR_TR14 ((u32)0x00004000) /* Rising trigger event configuration bit of line 14 */ -#define EXTI_RTSR_TR15 ((u32)0x00008000) /* Rising trigger event configuration bit of line 15 */ -#define EXTI_RTSR_TR16 ((u32)0x00010000) /* Rising trigger event configuration bit of line 16 */ -#define EXTI_RTSR_TR17 ((u32)0x00020000) /* Rising trigger event configuration bit of line 17 */ -#define EXTI_RTSR_TR18 ((u32)0x00040000) /* Rising trigger event configuration bit of line 18 */ - - -/****************** Bit definition for EXTI_FTSR register *******************/ -#define EXTI_FTSR_TR0 ((u32)0x00000001) /* Falling trigger event configuration bit of line 0 */ -#define EXTI_FTSR_TR1 ((u32)0x00000002) /* Falling trigger event configuration bit of line 1 */ -#define EXTI_FTSR_TR2 ((u32)0x00000004) /* Falling trigger event configuration bit of line 2 */ -#define EXTI_FTSR_TR3 ((u32)0x00000008) /* Falling trigger event configuration bit of line 3 */ -#define EXTI_FTSR_TR4 ((u32)0x00000010) /* Falling trigger event configuration bit of line 4 */ -#define EXTI_FTSR_TR5 ((u32)0x00000020) /* Falling trigger event configuration bit of line 5 */ -#define EXTI_FTSR_TR6 ((u32)0x00000040) /* Falling trigger event configuration bit of line 6 */ -#define EXTI_FTSR_TR7 ((u32)0x00000080) /* Falling trigger event configuration bit of line 7 */ -#define EXTI_FTSR_TR8 ((u32)0x00000100) /* Falling trigger event configuration bit of line 8 */ -#define EXTI_FTSR_TR9 ((u32)0x00000200) /* Falling trigger event configuration bit of line 9 */ -#define EXTI_FTSR_TR10 ((u32)0x00000400) /* Falling trigger event configuration bit of line 10 */ -#define EXTI_FTSR_TR11 ((u32)0x00000800) /* Falling trigger event configuration bit of line 11 */ -#define EXTI_FTSR_TR12 ((u32)0x00001000) /* Falling trigger event configuration bit of line 12 */ -#define EXTI_FTSR_TR13 ((u32)0x00002000) /* Falling trigger event configuration bit of line 13 */ -#define EXTI_FTSR_TR14 ((u32)0x00004000) /* Falling trigger event configuration bit of line 14 */ -#define EXTI_FTSR_TR15 ((u32)0x00008000) /* Falling trigger event configuration bit of line 15 */ -#define EXTI_FTSR_TR16 ((u32)0x00010000) /* Falling trigger event configuration bit of line 16 */ -#define EXTI_FTSR_TR17 ((u32)0x00020000) /* Falling trigger event configuration bit of line 17 */ -#define EXTI_FTSR_TR18 ((u32)0x00040000) /* Falling trigger event configuration bit of line 18 */ - - -/****************** Bit definition for EXTI_SWIER register ******************/ -#define EXTI_SWIER_SWIER0 ((u32)0x00000001) /* Software Interrupt on line 0 */ -#define EXTI_SWIER_SWIER1 ((u32)0x00000002) /* Software Interrupt on line 1 */ -#define EXTI_SWIER_SWIER2 ((u32)0x00000004) /* Software Interrupt on line 2 */ -#define EXTI_SWIER_SWIER3 ((u32)0x00000008) /* Software Interrupt on line 3 */ -#define EXTI_SWIER_SWIER4 ((u32)0x00000010) /* Software Interrupt on line 4 */ -#define EXTI_SWIER_SWIER5 ((u32)0x00000020) /* Software Interrupt on line 5 */ -#define EXTI_SWIER_SWIER6 ((u32)0x00000040) /* Software Interrupt on line 6 */ -#define EXTI_SWIER_SWIER7 ((u32)0x00000080) /* Software Interrupt on line 7 */ -#define EXTI_SWIER_SWIER8 ((u32)0x00000100) /* Software Interrupt on line 8 */ -#define EXTI_SWIER_SWIER9 ((u32)0x00000200) /* Software Interrupt on line 9 */ -#define EXTI_SWIER_SWIER10 ((u32)0x00000400) /* Software Interrupt on line 10 */ -#define EXTI_SWIER_SWIER11 ((u32)0x00000800) /* Software Interrupt on line 11 */ -#define EXTI_SWIER_SWIER12 ((u32)0x00001000) /* Software Interrupt on line 12 */ -#define EXTI_SWIER_SWIER13 ((u32)0x00002000) /* Software Interrupt on line 13 */ -#define EXTI_SWIER_SWIER14 ((u32)0x00004000) /* Software Interrupt on line 14 */ -#define EXTI_SWIER_SWIER15 ((u32)0x00008000) /* Software Interrupt on line 15 */ -#define EXTI_SWIER_SWIER16 ((u32)0x00010000) /* Software Interrupt on line 16 */ -#define EXTI_SWIER_SWIER17 ((u32)0x00020000) /* Software Interrupt on line 17 */ -#define EXTI_SWIER_SWIER18 ((u32)0x00040000) /* Software Interrupt on line 18 */ - - -/******************* Bit definition for EXTI_PR register ********************/ -#define EXTI_PR_PR0 ((u32)0x00000001) /* Pending bit 0 */ -#define EXTI_PR_PR1 ((u32)0x00000002) /* Pending bit 1 */ -#define EXTI_PR_PR2 ((u32)0x00000004) /* Pending bit 2 */ -#define EXTI_PR_PR3 ((u32)0x00000008) /* Pending bit 3 */ -#define EXTI_PR_PR4 ((u32)0x00000010) /* Pending bit 4 */ -#define EXTI_PR_PR5 ((u32)0x00000020) /* Pending bit 5 */ -#define EXTI_PR_PR6 ((u32)0x00000040) /* Pending bit 6 */ -#define EXTI_PR_PR7 ((u32)0x00000080) /* Pending bit 7 */ -#define EXTI_PR_PR8 ((u32)0x00000100) /* Pending bit 8 */ -#define EXTI_PR_PR9 ((u32)0x00000200) /* Pending bit 9 */ -#define EXTI_PR_PR10 ((u32)0x00000400) /* Pending bit 10 */ -#define EXTI_PR_PR11 ((u32)0x00000800) /* Pending bit 11 */ -#define EXTI_PR_PR12 ((u32)0x00001000) /* Pending bit 12 */ -#define EXTI_PR_PR13 ((u32)0x00002000) /* Pending bit 13 */ -#define EXTI_PR_PR14 ((u32)0x00004000) /* Pending bit 14 */ -#define EXTI_PR_PR15 ((u32)0x00008000) /* Pending bit 15 */ -#define EXTI_PR_PR16 ((u32)0x00010000) /* Pending bit 16 */ -#define EXTI_PR_PR17 ((u32)0x00020000) /* Pending bit 17 */ -#define EXTI_PR_PR18 ((u32)0x00040000) /* Trigger request occurred on the external interrupt line 18 */ - - - -/******************************************************************************/ -/* */ -/* DMA Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for DMA_ISR register ********************/ -#define DMA_ISR_GIF1 ((u32)0x00000001) /* Channel 1 Global interrupt flag */ -#define DMA_ISR_TCIF1 ((u32)0x00000002) /* Channel 1 Transfer Complete flag */ -#define DMA_ISR_HTIF1 ((u32)0x00000004) /* Channel 1 Half Transfer flag */ -#define DMA_ISR_TEIF1 ((u32)0x00000008) /* Channel 1 Transfer Error flag */ -#define DMA_ISR_GIF2 ((u32)0x00000010) /* Channel 2 Global interrupt flag */ -#define DMA_ISR_TCIF2 ((u32)0x00000020) /* Channel 2 Transfer Complete flag */ -#define DMA_ISR_HTIF2 ((u32)0x00000040) /* Channel 2 Half Transfer flag */ -#define DMA_ISR_TEIF2 ((u32)0x00000080) /* Channel 2 Transfer Error flag */ -#define DMA_ISR_GIF3 ((u32)0x00000100) /* Channel 3 Global interrupt flag */ -#define DMA_ISR_TCIF3 ((u32)0x00000200) /* Channel 3 Transfer Complete flag */ -#define DMA_ISR_HTIF3 ((u32)0x00000400) /* Channel 3 Half Transfer flag */ -#define DMA_ISR_TEIF3 ((u32)0x00000800) /* Channel 3 Transfer Error flag */ -#define DMA_ISR_GIF4 ((u32)0x00001000) /* Channel 4 Global interrupt flag */ -#define DMA_ISR_TCIF4 ((u32)0x00002000) /* Channel 4 Transfer Complete flag */ -#define DMA_ISR_HTIF4 ((u32)0x00004000) /* Channel 4 Half Transfer flag */ -#define DMA_ISR_TEIF4 ((u32)0x00008000) /* Channel 4 Transfer Error flag */ -#define DMA_ISR_GIF5 ((u32)0x00010000) /* Channel 5 Global interrupt flag */ -#define DMA_ISR_TCIF5 ((u32)0x00020000) /* Channel 5 Transfer Complete flag */ -#define DMA_ISR_HTIF5 ((u32)0x00040000) /* Channel 5 Half Transfer flag */ -#define DMA_ISR_TEIF5 ((u32)0x00080000) /* Channel 5 Transfer Error flag */ -#define DMA_ISR_GIF6 ((u32)0x00100000) /* Channel 6 Global interrupt flag */ -#define DMA_ISR_TCIF6 ((u32)0x00200000) /* Channel 6 Transfer Complete flag */ -#define DMA_ISR_HTIF6 ((u32)0x00400000) /* Channel 6 Half Transfer flag */ -#define DMA_ISR_TEIF6 ((u32)0x00800000) /* Channel 6 Transfer Error flag */ -#define DMA_ISR_GIF7 ((u32)0x01000000) /* Channel 7 Global interrupt flag */ -#define DMA_ISR_TCIF7 ((u32)0x02000000) /* Channel 7 Transfer Complete flag */ -#define DMA_ISR_HTIF7 ((u32)0x04000000) /* Channel 7 Half Transfer flag */ -#define DMA_ISR_TEIF7 ((u32)0x08000000) /* Channel 7 Transfer Error flag */ - - -/******************* Bit definition for DMA_IFCR register *******************/ -#define DMA_IFCR_CGIF1 ((u32)0x00000001) /* Channel 1 Global interrupt clearr */ -#define DMA_IFCR_CTCIF1 ((u32)0x00000002) /* Channel 1 Transfer Complete clear */ -#define DMA_IFCR_CHTIF1 ((u32)0x00000004) /* Channel 1 Half Transfer clear */ -#define DMA_IFCR_CTEIF1 ((u32)0x00000008) /* Channel 1 Transfer Error clear */ -#define DMA_IFCR_CGIF2 ((u32)0x00000010) /* Channel 2 Global interrupt clear */ -#define DMA_IFCR_CTCIF2 ((u32)0x00000020) /* Channel 2 Transfer Complete clear */ -#define DMA_IFCR_CHTIF2 ((u32)0x00000040) /* Channel 2 Half Transfer clear */ -#define DMA_IFCR_CTEIF2 ((u32)0x00000080) /* Channel 2 Transfer Error clear */ -#define DMA_IFCR_CGIF3 ((u32)0x00000100) /* Channel 3 Global interrupt clear */ -#define DMA_IFCR_CTCIF3 ((u32)0x00000200) /* Channel 3 Transfer Complete clear */ -#define DMA_IFCR_CHTIF3 ((u32)0x00000400) /* Channel 3 Half Transfer clear */ -#define DMA_IFCR_CTEIF3 ((u32)0x00000800) /* Channel 3 Transfer Error clear */ -#define DMA_IFCR_CGIF4 ((u32)0x00001000) /* Channel 4 Global interrupt clear */ -#define DMA_IFCR_CTCIF4 ((u32)0x00002000) /* Channel 4 Transfer Complete clear */ -#define DMA_IFCR_CHTIF4 ((u32)0x00004000) /* Channel 4 Half Transfer clear */ -#define DMA_IFCR_CTEIF4 ((u32)0x00008000) /* Channel 4 Transfer Error clear */ -#define DMA_IFCR_CGIF5 ((u32)0x00010000) /* Channel 5 Global interrupt clear */ -#define DMA_IFCR_CTCIF5 ((u32)0x00020000) /* Channel 5 Transfer Complete clear */ -#define DMA_IFCR_CHTIF5 ((u32)0x00040000) /* Channel 5 Half Transfer clear */ -#define DMA_IFCR_CTEIF5 ((u32)0x00080000) /* Channel 5 Transfer Error clear */ -#define DMA_IFCR_CGIF6 ((u32)0x00100000) /* Channel 6 Global interrupt clear */ -#define DMA_IFCR_CTCIF6 ((u32)0x00200000) /* Channel 6 Transfer Complete clear */ -#define DMA_IFCR_CHTIF6 ((u32)0x00400000) /* Channel 6 Half Transfer clear */ -#define DMA_IFCR_CTEIF6 ((u32)0x00800000) /* Channel 6 Transfer Error clear */ -#define DMA_IFCR_CGIF7 ((u32)0x01000000) /* Channel 7 Global interrupt clear */ -#define DMA_IFCR_CTCIF7 ((u32)0x02000000) /* Channel 7 Transfer Complete clear */ -#define DMA_IFCR_CHTIF7 ((u32)0x04000000) /* Channel 7 Half Transfer clear */ -#define DMA_IFCR_CTEIF7 ((u32)0x08000000) /* Channel 7 Transfer Error clear */ - - -/******************* Bit definition for DMA_CCR1 register *******************/ -#define DMA_CCR1_EN ((u16)0x0001) /* Channel enable*/ -#define DMA_CCR1_TCIE ((u16)0x0002) /* Transfer complete interrupt enable */ -#define DMA_CCR1_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR1_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR1_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR1_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR1_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR1_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR1_PSIZE ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR1_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR1_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR1_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR1_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR1_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR1_PL ((u16)0x3000) /* PL[1:0] bits(Channel Priority level) */ -#define DMA_CCR1_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR1_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR1_MEM2MEM ((u16)0x4000) /* Memory to memory mode */ - - -/******************* Bit definition for DMA_CCR2 register *******************/ -#define DMA_CCR2_EN ((u16)0x0001) /* Channel enable */ -#define DMA_CCR2_TCIE ((u16)0x0002) /* ransfer complete interrupt enable */ -#define DMA_CCR2_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR2_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR2_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR2_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR2_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR2_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR2_PSIZE ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR2_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR2_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR2_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR2_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR2_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR2_PL ((u16)0x3000) /* PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR2_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR2_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR2_MEM2MEM ((u16)0x4000) /* Memory to memory mode */ - - -/******************* Bit definition for DMA_CCR3 register *******************/ -#define DMA_CCR3_EN ((u16)0x0001) /* Channel enable */ -#define DMA_CCR3_TCIE ((u16)0x0002) /* Transfer complete interrupt enable */ -#define DMA_CCR3_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR3_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR3_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR3_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR3_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR3_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR3_PSIZE ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR3_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR3_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR3_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR3_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR3_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR3_PL ((u16)0x3000) /* PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR3_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR3_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR3_MEM2MEM ((u16)0x4000) /* Memory to memory mode */ - - -/******************* Bit definition for DMA_CCR4 register *******************/ -#define DMA_CCR4_EN ((u16)0x0001) /* Channel enable */ -#define DMA_CCR4_TCIE ((u16)0x0002) /* Transfer complete interrupt enable */ -#define DMA_CCR4_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR4_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR4_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR4_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR4_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR4_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR4_PSIZE ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR4_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR4_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR4_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR4_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR4_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR4_PL ((u16)0x3000) /* PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR4_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR4_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR4_MEM2MEM ((u16)0x4000) /* Memory to memory mode */ - - -/****************** Bit definition for DMA_CCR5 register *******************/ -#define DMA_CCR5_EN ((u16)0x0001) /* Channel enable */ -#define DMA_CCR5_TCIE ((u16)0x0002) /* Transfer complete interrupt enable */ -#define DMA_CCR5_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR5_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR5_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR5_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR5_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR5_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR5_PSIZE ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR5_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR5_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR5_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR5_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR5_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR5_PL ((u16)0x3000) /* PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR5_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR5_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR5_MEM2MEM ((u16)0x4000) /* Memory to memory mode enable */ - - -/******************* Bit definition for DMA_CCR6 register *******************/ -#define DMA_CCR6_EN ((u16)0x0001) /* Channel enable */ -#define DMA_CCR6_TCIE ((u16)0x0002) /* Transfer complete interrupt enable */ -#define DMA_CCR6_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR6_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR6_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR6_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR6_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR6_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR6_PSIZE ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR6_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR6_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR6_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR6_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR6_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR6_PL ((u16)0x3000) /* PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR6_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR6_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR6_MEM2MEM ((u16)0x4000) /* Memory to memory mode */ - - -/******************* Bit definition for DMA_CCR7 register *******************/ -#define DMA_CCR7_EN ((u16)0x0001) /* Channel enable */ -#define DMA_CCR7_TCIE ((u16)0x0002) /* Transfer complete interrupt enable */ -#define DMA_CCR7_HTIE ((u16)0x0004) /* Half Transfer interrupt enable */ -#define DMA_CCR7_TEIE ((u16)0x0008) /* Transfer error interrupt enable */ -#define DMA_CCR7_DIR ((u16)0x0010) /* Data transfer direction */ -#define DMA_CCR7_CIRC ((u16)0x0020) /* Circular mode */ -#define DMA_CCR7_PINC ((u16)0x0040) /* Peripheral increment mode */ -#define DMA_CCR7_MINC ((u16)0x0080) /* Memory increment mode */ - -#define DMA_CCR7_PSIZE , ((u16)0x0300) /* PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR7_PSIZE_0 ((u16)0x0100) /* Bit 0 */ -#define DMA_CCR7_PSIZE_1 ((u16)0x0200) /* Bit 1 */ - -#define DMA_CCR7_MSIZE ((u16)0x0C00) /* MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR7_MSIZE_0 ((u16)0x0400) /* Bit 0 */ -#define DMA_CCR7_MSIZE_1 ((u16)0x0800) /* Bit 1 */ - -#define DMA_CCR7_PL ((u16)0x3000) /* PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR7_PL_0 ((u16)0x1000) /* Bit 0 */ -#define DMA_CCR7_PL_1 ((u16)0x2000) /* Bit 1 */ - -#define DMA_CCR7_MEM2MEM ((u16)0x4000) /* Memory to memory mode enable */ - - -/****************** Bit definition for DMA_CNDTR1 register ******************/ -#define DMA_CNDTR1_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CNDTR2 register ******************/ -#define DMA_CNDTR2_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CNDTR3 register ******************/ -#define DMA_CNDTR3_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CNDTR4 register ******************/ -#define DMA_CNDTR4_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CNDTR5 register ******************/ -#define DMA_CNDTR5_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CNDTR6 register ******************/ -#define DMA_CNDTR6_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CNDTR7 register ******************/ -#define DMA_CNDTR7_NDT ((u16)0xFFFF) /* Number of data to Transfer */ - - -/****************** Bit definition for DMA_CPAR1 register *******************/ -#define DMA_CPAR1_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR2 register *******************/ -#define DMA_CPAR2_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR3 register *******************/ -#define DMA_CPAR3_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR4 register *******************/ -#define DMA_CPAR4_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR5 register *******************/ -#define DMA_CPAR5_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR6 register *******************/ -#define DMA_CPAR6_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CPAR7 register *******************/ -#define DMA_CPAR7_PA ((u32)0xFFFFFFFF) /* Peripheral Address */ - - -/****************** Bit definition for DMA_CMAR1 register *******************/ -#define DMA_CMAR1_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - -/****************** Bit definition for DMA_CMAR2 register *******************/ -#define DMA_CMAR2_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - -/****************** Bit definition for DMA_CMAR3 register *******************/ -#define DMA_CMAR3_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - -/****************** Bit definition for DMA_CMAR4 register *******************/ -#define DMA_CMAR4_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - -/****************** Bit definition for DMA_CMAR5 register *******************/ -#define DMA_CMAR5_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - -/****************** Bit definition for DMA_CMAR6 register *******************/ -#define DMA_CMAR6_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - -/****************** Bit definition for DMA_CMAR7 register *******************/ -#define DMA_CMAR7_MA ((u32)0xFFFFFFFF) /* Memory Address */ - - - -/******************************************************************************/ -/* */ -/* Analog to Digital Converter */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for ADC_SR register ********************/ -#define ADC_SR_AWD ((u8)0x01) /* Analog watchdog flag */ -#define ADC_SR_EOC ((u8)0x02) /* End of conversion */ -#define ADC_SR_JEOC ((u8)0x04) /* Injected channel end of conversion */ -#define ADC_SR_JSTRT ((u8)0x08) /* Injected channel Start flag */ -#define ADC_SR_STRT ((u8)0x10) /* Regular channel Start flag */ - - -/******************* Bit definition for ADC_CR1 register ********************/ -#define ADC_CR1_AWDCH ((u32)0x0000001F) /* AWDCH[4:0] bits (Analog watchdog channel select bits) */ -#define ADC_CR1_AWDCH_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_CR1_AWDCH_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_CR1_AWDCH_2 ((u32)0x00000004) /* Bit 2 */ -#define ADC_CR1_AWDCH_3 ((u32)0x00000008) /* Bit 3 */ -#define ADC_CR1_AWDCH_4 ((u32)0x00000010) /* Bit 4 */ - -#define ADC_CR1_EOCIE ((u32)0x00000020) /* Interrupt enable for EOC */ -#define ADC_CR1_AWDIE ((u32)0x00000040) /* AAnalog Watchdog interrupt enable */ -#define ADC_CR1_JEOCIE ((u32)0x00000080) /* Interrupt enable for injected channels */ -#define ADC_CR1_SCAN ((u32)0x00000100) /* Scan mode */ -#define ADC_CR1_AWDSGL ((u32)0x00000200) /* Enable the watchdog on a single channel in scan mode */ -#define ADC_CR1_JAUTO ((u32)0x00000400) /* Automatic injected group conversion */ -#define ADC_CR1_DISCEN ((u32)0x00000800) /* Discontinuous mode on regular channels */ -#define ADC_CR1_JDISCEN ((u32)0x00001000) /* Discontinuous mode on injected channels */ - -#define ADC_CR1_DISCNUM ((u32)0x0000E000) /* DISCNUM[2:0] bits (Discontinuous mode channel count) */ -#define ADC_CR1_DISCNUM_0 ((u32)0x00002000) /* Bit 0 */ -#define ADC_CR1_DISCNUM_1 ((u32)0x00004000) /* Bit 1 */ -#define ADC_CR1_DISCNUM_2 ((u32)0x00008000) /* Bit 2 */ - -#define ADC_CR1_DUALMOD ((u32)0x000F0000) /* DUALMOD[3:0] bits (Dual mode selection) */ -#define ADC_CR1_DUALMOD_0 ((u32)0x00010000) /* Bit 0 */ -#define ADC_CR1_DUALMOD_1 ((u32)0x00020000) /* Bit 1 */ -#define ADC_CR1_DUALMOD_2 ((u32)0x00040000) /* Bit 2 */ -#define ADC_CR1_DUALMOD_3 ((u32)0x00080000) /* Bit 3 */ - -#define ADC_CR1_JAWDEN ((u32)0x00400000) /* Analog watchdog enable on injected channels */ -#define ADC_CR1_AWDEN ((u32)0x00800000) /* Analog watchdog enable on regular channels */ - - -/******************* Bit definition for ADC_CR2 register ********************/ -#define ADC_CR2_ADON ((u32)0x00000001) /* A/D Converter ON / OFF */ -#define ADC_CR2_CONT ((u32)0x00000002) /* Continuous Conversion */ -#define ADC_CR2_CAL ((u32)0x00000004) /* A/D Calibration */ -#define ADC_CR2_RSTCAL ((u32)0x00000008) /* Reset Calibration */ -#define ADC_CR2_DMA ((u32)0x00000100) /* Direct Memory access mode */ -#define ADC_CR2_ALIGN ((u32)0x00000800) /* Data Alignment */ - -#define ADC_CR2_JEXTSEL ((u32)0x00007000) /* JEXTSEL[2:0] bits (External event select for injected group) */ -#define ADC_CR2_JEXTSEL_0 ((u32)0x00001000) /* Bit 0 */ -#define ADC_CR2_JEXTSEL_1 ((u32)0x00002000) /* Bit 1 */ -#define ADC_CR2_JEXTSEL_2 ((u32)0x00004000) /* Bit 2 */ - -#define ADC_CR2_JEXTTRIG ((u32)0x00008000) /* External Trigger Conversion mode for injected channels */ - -#define ADC_CR2_EXTSEL ((u32)0x000E0000) /* EXTSEL[2:0] bits (External Event Select for regular group) */ -#define ADC_CR2_EXTSEL_0 ((u32)0x00020000) /* Bit 0 */ -#define ADC_CR2_EXTSEL_1 ((u32)0x00040000) /* Bit 1 */ -#define ADC_CR2_EXTSEL_2 ((u32)0x00080000) /* Bit 2 */ - -#define ADC_CR2_EXTTRIG ((u32)0x00100000) /* External Trigger Conversion mode for regular channels */ -#define ADC_CR2_JSWSTART ((u32)0x00200000) /* Start Conversion of injected channels */ -#define ADC_CR2_SWSTART ((u32)0x00400000) /* Start Conversion of regular channels */ -#define ADC_CR2_TSVREFE ((u32)0x00800000) /* Temperature Sensor and VREFINT Enable */ - - -/****************** Bit definition for ADC_SMPR1 register *******************/ -#define ADC_SMPR1_SMP10 ((u32)0x00000007) /* SMP10[2:0] bits (Channel 10 Sample time selection) */ -#define ADC_SMPR1_SMP10_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_SMPR1_SMP10_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_SMPR1_SMP10_2 ((u32)0x00000004) /* Bit 2 */ - -#define ADC_SMPR1_SMP11 ((u32)0x00000038) /* SMP11[2:0] bits (Channel 11 Sample time selection) */ -#define ADC_SMPR1_SMP11_0 ((u32)0x00000008) /* Bit 0 */ -#define ADC_SMPR1_SMP11_1 ((u32)0x00000010) /* Bit 1 */ -#define ADC_SMPR1_SMP11_2 ((u32)0x00000020) /* Bit 2 */ - -#define ADC_SMPR1_SMP12 ((u32)0x000001C0) /* SMP12[2:0] bits (Channel 12 Sample time selection) */ -#define ADC_SMPR1_SMP12_0 ((u32)0x00000040) /* Bit 0 */ -#define ADC_SMPR1_SMP12_1 ((u32)0x00000080) /* Bit 1 */ -#define ADC_SMPR1_SMP12_2 ((u32)0x00000100) /* Bit 2 */ - -#define ADC_SMPR1_SMP13 ((u32)0x00000E00) /* SMP13[2:0] bits (Channel 13 Sample time selection) */ -#define ADC_SMPR1_SMP13_0 ((u32)0x00000200) /* Bit 0 */ -#define ADC_SMPR1_SMP13_1 ((u32)0x00000400) /* Bit 1 */ -#define ADC_SMPR1_SMP13_2 ((u32)0x00000800) /* Bit 2 */ - -#define ADC_SMPR1_SMP14 ((u32)0x00007000) /* SMP14[2:0] bits (Channel 14 Sample time selection) */ -#define ADC_SMPR1_SMP14_0 ((u32)0x00001000) /* Bit 0 */ -#define ADC_SMPR1_SMP14_1 ((u32)0x00002000) /* Bit 1 */ -#define ADC_SMPR1_SMP14_2 ((u32)0x00004000) /* Bit 2 */ - -#define ADC_SMPR1_SMP15 ((u32)0x00038000) /* SMP15[2:0] bits (Channel 15 Sample time selection) */ -#define ADC_SMPR1_SMP15_0 ((u32)0x00008000) /* Bit 0 */ -#define ADC_SMPR1_SMP15_1 ((u32)0x00010000) /* Bit 1 */ -#define ADC_SMPR1_SMP15_2 ((u32)0x00020000) /* Bit 2 */ - -#define ADC_SMPR1_SMP16 ((u32)0x001C0000) /* SMP16[2:0] bits (Channel 16 Sample time selection) */ -#define ADC_SMPR1_SMP16_0 ((u32)0x00040000) /* Bit 0 */ -#define ADC_SMPR1_SMP16_1 ((u32)0x00080000) /* Bit 1 */ -#define ADC_SMPR1_SMP16_2 ((u32)0x00100000) /* Bit 2 */ - -#define ADC_SMPR1_SMP17 ((u32)0x00E00000) /* SMP17[2:0] bits (Channel 17 Sample time selection) */ -#define ADC_SMPR1_SMP17_0 ((u32)0x00200000) /* Bit 0 */ -#define ADC_SMPR1_SMP17_1 ((u32)0x00400000) /* Bit 1 */ -#define ADC_SMPR1_SMP17_2 ((u32)0x00800000) /* Bit 2 */ - - -/****************** Bit definition for ADC_SMPR2 register *******************/ -#define ADC_SMPR2_SMP0 ((u32)0x00000007) /* SMP0[2:0] bits (Channel 0 Sample time selection) */ -#define ADC_SMPR2_SMP0_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_SMPR2_SMP0_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_SMPR2_SMP0_2 ((u32)0x00000004) /* Bit 2 */ - -#define ADC_SMPR2_SMP1 ((u32)0x00000038) /* SMP1[2:0] bits (Channel 1 Sample time selection) */ -#define ADC_SMPR2_SMP1_0 ((u32)0x00000008) /* Bit 0 */ -#define ADC_SMPR2_SMP1_1 ((u32)0x00000010) /* Bit 1 */ -#define ADC_SMPR2_SMP1_2 ((u32)0x00000020) /* Bit 2 */ - -#define ADC_SMPR2_SMP2 ((u32)0x000001C0) /* SMP2[2:0] bits (Channel 2 Sample time selection) */ -#define ADC_SMPR2_SMP2_0 ((u32)0x00000040) /* Bit 0 */ -#define ADC_SMPR2_SMP2_1 ((u32)0x00000080) /* Bit 1 */ -#define ADC_SMPR2_SMP2_2 ((u32)0x00000100) /* Bit 2 */ - -#define ADC_SMPR2_SMP3 ((u32)0x00000E00) /* SMP3[2:0] bits (Channel 3 Sample time selection) */ -#define ADC_SMPR2_SMP3_0 ((u32)0x00000200) /* Bit 0 */ -#define ADC_SMPR2_SMP3_1 ((u32)0x00000400) /* Bit 1 */ -#define ADC_SMPR2_SMP3_2 ((u32)0x00000800) /* Bit 2 */ - -#define ADC_SMPR2_SMP4 ((u32)0x00007000) /* SMP4[2:0] bits (Channel 4 Sample time selection) */ -#define ADC_SMPR2_SMP4_0 ((u32)0x00001000) /* Bit 0 */ -#define ADC_SMPR2_SMP4_1 ((u32)0x00002000) /* Bit 1 */ -#define ADC_SMPR2_SMP4_2 ((u32)0x00004000) /* Bit 2 */ - -#define ADC_SMPR2_SMP5 ((u32)0x00038000) /* SMP5[2:0] bits (Channel 5 Sample time selection) */ -#define ADC_SMPR2_SMP5_0 ((u32)0x00008000) /* Bit 0 */ -#define ADC_SMPR2_SMP5_1 ((u32)0x00010000) /* Bit 1 */ -#define ADC_SMPR2_SMP5_2 ((u32)0x00020000) /* Bit 2 */ - -#define ADC_SMPR2_SMP6 ((u32)0x001C0000) /* SMP6[2:0] bits (Channel 6 Sample time selection) */ -#define ADC_SMPR2_SMP6_0 ((u32)0x00040000) /* Bit 0 */ -#define ADC_SMPR2_SMP6_1 ((u32)0x00080000) /* Bit 1 */ -#define ADC_SMPR2_SMP6_2 ((u32)0x00100000) /* Bit 2 */ - -#define ADC_SMPR2_SMP7 ((u32)0x00E00000) /* SMP7[2:0] bits (Channel 7 Sample time selection) */ -#define ADC_SMPR2_SMP7_0 ((u32)0x00200000) /* Bit 0 */ -#define ADC_SMPR2_SMP7_1 ((u32)0x00400000) /* Bit 1 */ -#define ADC_SMPR2_SMP7_2 ((u32)0x00800000) /* Bit 2 */ - -#define ADC_SMPR2_SMP8 ((u32)0x07000000) /* SMP8[2:0] bits (Channel 8 Sample time selection) */ -#define ADC_SMPR2_SMP8_0 ((u32)0x01000000) /* Bit 0 */ -#define ADC_SMPR2_SMP8_1 ((u32)0x02000000) /* Bit 1 */ -#define ADC_SMPR2_SMP8_2 ((u32)0x04000000) /* Bit 2 */ - -#define ADC_SMPR2_SMP9 ((u32)0x38000000) /* SMP9[2:0] bits (Channel 9 Sample time selection) */ -#define ADC_SMPR2_SMP9_0 ((u32)0x08000000) /* Bit 0 */ -#define ADC_SMPR2_SMP9_1 ((u32)0x10000000) /* Bit 1 */ -#define ADC_SMPR2_SMP9_2 ((u32)0x20000000) /* Bit 2 */ - - -/****************** Bit definition for ADC_JOFR1 register *******************/ -#define ADC_JOFR1_JOFFSET1 ((u16)0x0FFF) /* Data offset for injected channel 1 */ - - -/****************** Bit definition for ADC_JOFR2 register *******************/ -#define ADC_JOFR2_JOFFSET2 ((u16)0x0FFF) /* Data offset for injected channel 2 */ - - -/****************** Bit definition for ADC_JOFR3 register *******************/ -#define ADC_JOFR3_JOFFSET3 ((u16)0x0FFF) /* Data offset for injected channel 3 */ - - -/****************** Bit definition for ADC_JOFR4 register *******************/ -#define ADC_JOFR4_JOFFSET4 ((u16)0x0FFF) /* Data offset for injected channel 4 */ - - -/******************* Bit definition for ADC_HTR register ********************/ -#define ADC_HTR_HT ((u16)0x0FFF) /* Analog watchdog high threshold */ - - -/******************* Bit definition for ADC_LTR register ********************/ -#define ADC_LTR_LT ((u16)0x0FFF) /* Analog watchdog low threshold */ - - -/******************* Bit definition for ADC_SQR1 register *******************/ -#define ADC_SQR1_SQ13 ((u32)0x0000001F) /* SQ13[4:0] bits (13th conversion in regular sequence) */ -#define ADC_SQR1_SQ13_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_SQR1_SQ13_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_SQR1_SQ13_2 ((u32)0x00000004) /* Bit 2 */ -#define ADC_SQR1_SQ13_3 ((u32)0x00000008) /* Bit 3 */ -#define ADC_SQR1_SQ13_4 ((u32)0x00000010) /* Bit 4 */ - -#define ADC_SQR1_SQ14 ((u32)0x000003E0) /* SQ14[4:0] bits (14th conversion in regular sequence) */ -#define ADC_SQR1_SQ14_0 ((u32)0x00000020) /* Bit 0 */ -#define ADC_SQR1_SQ14_1 ((u32)0x00000040) /* Bit 1 */ -#define ADC_SQR1_SQ14_2 ((u32)0x00000080) /* Bit 2 */ -#define ADC_SQR1_SQ14_3 ((u32)0x00000100) /* Bit 3 */ -#define ADC_SQR1_SQ14_4 ((u32)0x00000200) /* Bit 4 */ - -#define ADC_SQR1_SQ15 ((u32)0x00007C00) /* SQ15[4:0] bits (15th conversion in regular sequence) */ -#define ADC_SQR1_SQ15_0 ((u32)0x00000400) /* Bit 0 */ -#define ADC_SQR1_SQ15_1 ((u32)0x00000800) /* Bit 1 */ -#define ADC_SQR1_SQ15_2 ((u32)0x00001000) /* Bit 2 */ -#define ADC_SQR1_SQ15_3 ((u32)0x00002000) /* Bit 3 */ -#define ADC_SQR1_SQ15_4 ((u32)0x00004000) /* Bit 4 */ - -#define ADC_SQR1_SQ16 ((u32)0x000F8000) /* SQ16[4:0] bits (16th conversion in regular sequence) */ -#define ADC_SQR1_SQ16_0 ((u32)0x00008000) /* Bit 0 */ -#define ADC_SQR1_SQ16_1 ((u32)0x00010000) /* Bit 1 */ -#define ADC_SQR1_SQ16_2 ((u32)0x00020000) /* Bit 2 */ -#define ADC_SQR1_SQ16_3 ((u32)0x00040000) /* Bit 3 */ -#define ADC_SQR1_SQ16_4 ((u32)0x00080000) /* Bit 4 */ - -#define ADC_SQR1_L ((u32)0x00F00000) /* L[3:0] bits (Regular channel sequence length) */ -#define ADC_SQR1_L_0 ((u32)0x00100000) /* Bit 0 */ -#define ADC_SQR1_L_1 ((u32)0x00200000) /* Bit 1 */ -#define ADC_SQR1_L_2 ((u32)0x00400000) /* Bit 2 */ -#define ADC_SQR1_L_3 ((u32)0x00800000) /* Bit 3 */ - - -/******************* Bit definition for ADC_SQR2 register *******************/ -#define ADC_SQR2_SQ7 ((u32)0x0000001F) /* SQ7[4:0] bits (7th conversion in regular sequence) */ -#define ADC_SQR2_SQ7_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_SQR2_SQ7_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_SQR2_SQ7_2 ((u32)0x00000004) /* Bit 2 */ -#define ADC_SQR2_SQ7_3 ((u32)0x00000008) /* Bit 3 */ -#define ADC_SQR2_SQ7_4 ((u32)0x00000010) /* Bit 4 */ - -#define ADC_SQR2_SQ8 ((u32)0x000003E0) /* SQ8[4:0] bits (8th conversion in regular sequence) */ -#define ADC_SQR2_SQ8_0 ((u32)0x00000020) /* Bit 0 */ -#define ADC_SQR2_SQ8_1 ((u32)0x00000040) /* Bit 1 */ -#define ADC_SQR2_SQ8_2 ((u32)0x00000080) /* Bit 2 */ -#define ADC_SQR2_SQ8_3 ((u32)0x00000100) /* Bit 3 */ -#define ADC_SQR2_SQ8_4 ((u32)0x00000200) /* Bit 4 */ - -#define ADC_SQR2_SQ9 ((u32)0x00007C00) /* SQ9[4:0] bits (9th conversion in regular sequence) */ -#define ADC_SQR2_SQ9_0 ((u32)0x00000400) /* Bit 0 */ -#define ADC_SQR2_SQ9_1 ((u32)0x00000800) /* Bit 1 */ -#define ADC_SQR2_SQ9_2 ((u32)0x00001000) /* Bit 2 */ -#define ADC_SQR2_SQ9_3 ((u32)0x00002000) /* Bit 3 */ -#define ADC_SQR2_SQ9_4 ((u32)0x00004000) /* Bit 4 */ - -#define ADC_SQR2_SQ10 ((u32)0x000F8000) /* SQ10[4:0] bits (10th conversion in regular sequence) */ -#define ADC_SQR2_SQ10_0 ((u32)0x00008000) /* Bit 0 */ -#define ADC_SQR2_SQ10_1 ((u32)0x00010000) /* Bit 1 */ -#define ADC_SQR2_SQ10_2 ((u32)0x00020000) /* Bit 2 */ -#define ADC_SQR2_SQ10_3 ((u32)0x00040000) /* Bit 3 */ -#define ADC_SQR2_SQ10_4 ((u32)0x00080000) /* Bit 4 */ - -#define ADC_SQR2_SQ11 ((u32)0x01F00000) /* SQ11[4:0] bits (11th conversion in regular sequence) */ -#define ADC_SQR2_SQ11_0 ((u32)0x00100000) /* Bit 0 */ -#define ADC_SQR2_SQ11_1 ((u32)0x00200000) /* Bit 1 */ -#define ADC_SQR2_SQ11_2 ((u32)0x00400000) /* Bit 2 */ -#define ADC_SQR2_SQ11_3 ((u32)0x00800000) /* Bit 3 */ -#define ADC_SQR2_SQ11_4 ((u32)0x01000000) /* Bit 4 */ - -#define ADC_SQR2_SQ12 ((u32)0x3E000000) /* SQ12[4:0] bits (12th conversion in regular sequence) */ -#define ADC_SQR2_SQ12_0 ((u32)0x02000000) /* Bit 0 */ -#define ADC_SQR2_SQ12_1 ((u32)0x04000000) /* Bit 1 */ -#define ADC_SQR2_SQ12_2 ((u32)0x08000000) /* Bit 2 */ -#define ADC_SQR2_SQ12_3 ((u32)0x10000000) /* Bit 3 */ -#define ADC_SQR2_SQ12_4 ((u32)0x20000000) /* Bit 4 */ - - -/******************* Bit definition for ADC_SQR3 register *******************/ -#define ADC_SQR3_SQ1 ((u32)0x0000001F) /* SQ1[4:0] bits (1st conversion in regular sequence) */ -#define ADC_SQR3_SQ1_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_SQR3_SQ1_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_SQR3_SQ1_2 ((u32)0x00000004) /* Bit 2 */ -#define ADC_SQR3_SQ1_3 ((u32)0x00000008) /* Bit 3 */ -#define ADC_SQR3_SQ1_4 ((u32)0x00000010) /* Bit 4 */ - -#define ADC_SQR3_SQ2 ((u32)0x000003E0) /* SQ2[4:0] bits (2nd conversion in regular sequence) */ -#define ADC_SQR3_SQ2_0 ((u32)0x00000020) /* Bit 0 */ -#define ADC_SQR3_SQ2_1 ((u32)0x00000040) /* Bit 1 */ -#define ADC_SQR3_SQ2_2 ((u32)0x00000080) /* Bit 2 */ -#define ADC_SQR3_SQ2_3 ((u32)0x00000100) /* Bit 3 */ -#define ADC_SQR3_SQ2_4 ((u32)0x00000200) /* Bit 4 */ - -#define ADC_SQR3_SQ3 ((u32)0x00007C00) /* SQ3[4:0] bits (3rd conversion in regular sequence) */ -#define ADC_SQR3_SQ3_0 ((u32)0x00000400) /* Bit 0 */ -#define ADC_SQR3_SQ3_1 ((u32)0x00000800) /* Bit 1 */ -#define ADC_SQR3_SQ3_2 ((u32)0x00001000) /* Bit 2 */ -#define ADC_SQR3_SQ3_3 ((u32)0x00002000) /* Bit 3 */ -#define ADC_SQR3_SQ3_4 ((u32)0x00004000) /* Bit 4 */ - -#define ADC_SQR3_SQ4 ((u32)0x000F8000) /* SQ4[4:0] bits (4th conversion in regular sequence) */ -#define ADC_SQR3_SQ4_0 ((u32)0x00008000) /* Bit 0 */ -#define ADC_SQR3_SQ4_1 ((u32)0x00010000) /* Bit 1 */ -#define ADC_SQR3_SQ4_2 ((u32)0x00020000) /* Bit 2 */ -#define ADC_SQR3_SQ4_3 ((u32)0x00040000) /* Bit 3 */ -#define ADC_SQR3_SQ4_4 ((u32)0x00080000) /* Bit 4 */ - -#define ADC_SQR3_SQ5 ((u32)0x01F00000) /* SQ5[4:0] bits (5th conversion in regular sequence) */ -#define ADC_SQR3_SQ5_0 ((u32)0x00100000) /* Bit 0 */ -#define ADC_SQR3_SQ5_1 ((u32)0x00200000) /* Bit 1 */ -#define ADC_SQR3_SQ5_2 ((u32)0x00400000) /* Bit 2 */ -#define ADC_SQR3_SQ5_3 ((u32)0x00800000) /* Bit 3 */ -#define ADC_SQR3_SQ5_4 ((u32)0x01000000) /* Bit 4 */ - -#define ADC_SQR3_SQ6 ((u32)0x3E000000) /* SQ6[4:0] bits (6th conversion in regular sequence) */ -#define ADC_SQR3_SQ6_0 ((u32)0x02000000) /* Bit 0 */ -#define ADC_SQR3_SQ6_1 ((u32)0x04000000) /* Bit 1 */ -#define ADC_SQR3_SQ6_2 ((u32)0x08000000) /* Bit 2 */ -#define ADC_SQR3_SQ6_3 ((u32)0x10000000) /* Bit 3 */ -#define ADC_SQR3_SQ6_4 ((u32)0x20000000) /* Bit 4 */ - - -/******************* Bit definition for ADC_JSQR register *******************/ -#define ADC_JSQR_JSQ1 ((u32)0x0000001F) /* JSQ1[4:0] bits (1st conversion in injected sequence) */ -#define ADC_JSQR_JSQ1_0 ((u32)0x00000001) /* Bit 0 */ -#define ADC_JSQR_JSQ1_1 ((u32)0x00000002) /* Bit 1 */ -#define ADC_JSQR_JSQ1_2 ((u32)0x00000004) /* Bit 2 */ -#define ADC_JSQR_JSQ1_3 ((u32)0x00000008) /* Bit 3 */ -#define ADC_JSQR_JSQ1_4 ((u32)0x00000010) /* Bit 4 */ - -#define ADC_JSQR_JSQ2 ((u32)0x000003E0) /* JSQ2[4:0] bits (2nd conversion in injected sequence) */ -#define ADC_JSQR_JSQ2_0 ((u32)0x00000020) /* Bit 0 */ -#define ADC_JSQR_JSQ2_1 ((u32)0x00000040) /* Bit 1 */ -#define ADC_JSQR_JSQ2_2 ((u32)0x00000080) /* Bit 2 */ -#define ADC_JSQR_JSQ2_3 ((u32)0x00000100) /* Bit 3 */ -#define ADC_JSQR_JSQ2_4 ((u32)0x00000200) /* Bit 4 */ - -#define ADC_JSQR_JSQ3 ((u32)0x00007C00) /* JSQ3[4:0] bits (3rd conversion in injected sequence) */ -#define ADC_JSQR_JSQ3_0 ((u32)0x00000400) /* Bit 0 */ -#define ADC_JSQR_JSQ3_1 ((u32)0x00000800) /* Bit 1 */ -#define ADC_JSQR_JSQ3_2 ((u32)0x00001000) /* Bit 2 */ -#define ADC_JSQR_JSQ3_3 ((u32)0x00002000) /* Bit 3 */ -#define ADC_JSQR_JSQ3_4 ((u32)0x00004000) /* Bit 4 */ - -#define ADC_JSQR_JSQ4 ((u32)0x000F8000) /* JSQ4[4:0] bits (4th conversion in injected sequence) */ -#define ADC_JSQR_JSQ4_0 ((u32)0x00008000) /* Bit 0 */ -#define ADC_JSQR_JSQ4_1 ((u32)0x00010000) /* Bit 1 */ -#define ADC_JSQR_JSQ4_2 ((u32)0x00020000) /* Bit 2 */ -#define ADC_JSQR_JSQ4_3 ((u32)0x00040000) /* Bit 3 */ -#define ADC_JSQR_JSQ4_4 ((u32)0x00080000) /* Bit 4 */ - -#define ADC_JSQR_JL ((u32)0x00300000) /* JL[1:0] bits (Injected Sequence length) */ -#define ADC_JSQR_JL_0 ((u32)0x00100000) /* Bit 0 */ -#define ADC_JSQR_JL_1 ((u32)0x00200000) /* Bit 1 */ - - -/******************* Bit definition for ADC_JDR1 register *******************/ -#define ADC_JDR1_JDATA ((u16)0xFFFF) /* Injected data */ - - -/******************* Bit definition for ADC_JDR2 register *******************/ -#define ADC_JDR2_JDATA ((u16)0xFFFF) /* Injected data */ - - -/******************* Bit definition for ADC_JDR3 register *******************/ -#define ADC_JDR3_JDATA ((u16)0xFFFF) /* Injected data */ - - -/******************* Bit definition for ADC_JDR4 register *******************/ -#define ADC_JDR4_JDATA ((u16)0xFFFF) /* Injected data */ - - -/******************** Bit definition for ADC_DR register ********************/ -#define ADC_DR_DATA ((u32)0x0000FFFF) /* Regular data */ -#define ADC_DR_ADC2DATA ((u32)0xFFFF0000) /* ADC2 data */ - - - -/******************************************************************************/ -/* */ -/* Digital to Analog Converter */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for DAC_CR register ********************/ -#define DAC_CR_EN1 ((u32)0x00000001) /* DAC channel1 enable */ -#define DAC_CR_BOFF1 ((u32)0x00000002) /* DAC channel1 output buffer disable */ -#define DAC_CR_TEN1 ((u32)0x00000004) /* DAC channel1 Trigger enable */ - -#define DAC_CR_TSEL1 ((u32)0x00000038) /* TSEL1[2:0] (DAC channel1 Trigger selection) */ -#define DAC_CR_TSEL1_0 ((u32)0x00000008) /* Bit 0 */ -#define DAC_CR_TSEL1_1 ((u32)0x00000010) /* Bit 1 */ -#define DAC_CR_TSEL1_2 ((u32)0x00000020) /* Bit 2 */ - -#define DAC_CR_WAVE1 ((u32)0x000000C0) /* WAVE1[1:0] (DAC channel1 noise/triangle wave generation enable) */ -#define DAC_CR_WAVE1_0 ((u32)0x00000040) /* Bit 0 */ -#define DAC_CR_WAVE1_1 ((u32)0x00000080) /* Bit 1 */ - -#define DAC_CR_MAMP1 ((u32)0x00000F00) /* MAMP1[3:0] (DAC channel1 Mask/Amplitude selector) */ -#define DAC_CR_MAMP1_0 ((u32)0x00000100) /* Bit 0 */ -#define DAC_CR_MAMP1_1 ((u32)0x00000200) /* Bit 1 */ -#define DAC_CR_MAMP1_2 ((u32)0x00000400) /* Bit 2 */ -#define DAC_CR_MAMP1_3 ((u32)0x00000800) /* Bit 3 */ - -#define DAC_CR_DMAEN1 ((u32)0x00001000) /* DAC channel1 DMA enable */ -#define DAC_CR_EN2 ((u32)0x00010000) /* DAC channel2 enable */ -#define DAC_CR_BOFF2 ((u32)0x00020000) /* DAC channel2 output buffer disable */ -#define DAC_CR_TEN2 ((u32)0x00040000) /* DAC channel2 Trigger enable */ - -#define DAC_CR_TSEL2 ((u32)0x00380000) /* TSEL2[2:0] (DAC channel2 Trigger selection) */ -#define DAC_CR_TSEL2_0 ((u32)0x00080000) /* Bit 0 */ -#define DAC_CR_TSEL2_1 ((u32)0x00100000) /* Bit 1 */ -#define DAC_CR_TSEL2_2 ((u32)0x00200000) /* Bit 2 */ - -#define DAC_CR_WAVE2 ((u32)0x00C00000) /* WAVE2[1:0] (DAC channel2 noise/triangle wave generation enable) */ -#define DAC_CR_WAVE2_0 ((u32)0x00400000) /* Bit 0 */ -#define DAC_CR_WAVE2_1 ((u32)0x00800000) /* Bit 1 */ - -#define DAC_CR_MAMP2 ((u32)0x0F000000) /* MAMP2[3:0] (DAC channel2 Mask/Amplitude selector) */ -#define DAC_CR_MAMP2_0 ((u32)0x01000000) /* Bit 0 */ -#define DAC_CR_MAMP2_1 ((u32)0x02000000) /* Bit 1 */ -#define DAC_CR_MAMP2_2 ((u32)0x04000000) /* Bit 2 */ -#define DAC_CR_MAMP2_3 ((u32)0x08000000) /* Bit 3 */ - -#define DAC_CR_DMAEN2 ((u32)0x10000000) /* DAC channel2 DMA enabled */ - - -/***************** Bit definition for DAC_SWTRIGR register ******************/ -#define DAC_SWTRIGR_SWTRIG1 ((u8)0x01) /* DAC channel1 software trigger */ -#define DAC_SWTRIGR_SWTRIG2 ((u8)0x02) /* DAC channel2 software trigger */ - - -/***************** Bit definition for DAC_DHR12R1 register ******************/ -#define DAC_DHR12R1_DACC1DHR ((u16)0x0FFF) /* DAC channel1 12-bit Right aligned data */ - - -/***************** Bit definition for DAC_DHR12L1 register ******************/ -#define DAC_DHR12L1_DACC1DHR ((u16)0xFFF0) /* DAC channel1 12-bit Left aligned data */ - - -/****************** Bit definition for DAC_DHR8R1 register ******************/ -#define DAC_DHR8R1_DACC1DHR ((u8)0xFF) /* DAC channel1 8-bit Right aligned data */ - - -/***************** Bit definition for DAC_DHR12R2 register ******************/ -#define DAC_DHR12R2_DACC2DHR ((u16)0x0FFF) /* DAC channel2 12-bit Right aligned data */ - - -/***************** Bit definition for DAC_DHR12L2 register ******************/ -#define DAC_DHR12L2_DACC2DHR ((u16)0xFFF0) /* DAC channel2 12-bit Left aligned data */ - - -/****************** Bit definition for DAC_DHR8R2 register ******************/ -#define DAC_DHR8R2_DACC2DHR ((u8)0xFF) /* DAC channel2 8-bit Right aligned data */ - - -/***************** Bit definition for DAC_DHR12RD register ******************/ -#define DAC_DHR12RD_DACC1DHR ((u32)0x00000FFF) /* DAC channel1 12-bit Right aligned data */ -#define DAC_DHR12RD_DACC2DHR ((u32)0x0FFF0000) /* DAC channel2 12-bit Right aligned data */ - - -/***************** Bit definition for DAC_DHR12LD register ******************/ -#define DAC_DHR12LD_DACC1DHR ((u32)0x0000FFF0) /* DAC channel1 12-bit Left aligned data */ -#define DAC_DHR12LD_DACC2DHR ((u32)0xFFF00000) /* DAC channel2 12-bit Left aligned data */ - - -/****************** Bit definition for DAC_DHR8RD register ******************/ -#define DAC_DHR8RD_DACC1DHR ((u16)0x00FF) /* DAC channel1 8-bit Right aligned data */ -#define DAC_DHR8RD_DACC2DHR ((u16)0xFF00) /* DAC channel2 8-bit Right aligned data */ - - -/******************* Bit definition for DAC_DOR1 register *******************/ -#define DAC_DOR1_DACC1DOR ((u16)0x0FFF) /* DAC channel1 data output */ - - -/******************* Bit definition for DAC_DOR2 register *******************/ -#define DAC_DOR2_DACC2DOR ((u16)0x0FFF) /* DAC channel2 data output */ - - - -/******************************************************************************/ -/* */ -/* TIM */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for TIM_CR1 register ********************/ -#define TIM_CR1_CEN ((u16)0x0001) /* Counter enable */ -#define TIM_CR1_UDIS ((u16)0x0002) /* Update disable */ -#define TIM_CR1_URS ((u16)0x0004) /* Update request source */ -#define TIM_CR1_OPM ((u16)0x0008) /* One pulse mode */ -#define TIM_CR1_DIR ((u16)0x0010) /* Direction */ - -#define TIM_CR1_CMS ((u16)0x0060) /* CMS[1:0] bits (Center-aligned mode selection) */ -#define TIM_CR1_CMS_0 ((u16)0x0020) /* Bit 0 */ -#define TIM_CR1_CMS_1 ((u16)0x0040) /* Bit 1 */ - -#define TIM_CR1_ARPE ((u16)0x0080) /* Auto-reload preload enable */ - -#define TIM_CR1_CKD ((u16)0x0300) /* CKD[1:0] bits (clock division) */ -#define TIM_CR1_CKD_0 ((u16)0x0100) /* Bit 0 */ -#define TIM_CR1_CKD_1 ((u16)0x0200) /* Bit 1 */ - - -/******************* Bit definition for TIM_CR2 register ********************/ -#define TIM_CR2_CCPC ((u16)0x0001) /* Capture/Compare Preloaded Control */ -#define TIM_CR2_CCUS ((u16)0x0004) /* Capture/Compare Control Update Selection */ -#define TIM_CR2_CCDS ((u16)0x0008) /* Capture/Compare DMA Selection */ - -#define TIM_CR2_MMS ((u16)0x0070) /* MMS[2:0] bits (Master Mode Selection) */ -#define TIM_CR2_MMS_0 ((u16)0x0010) /* Bit 0 */ -#define TIM_CR2_MMS_1 ((u16)0x0020) /* Bit 1 */ -#define TIM_CR2_MMS_2 ((u16)0x0040) /* Bit 2 */ - -#define TIM_CR2_TI1S ((u16)0x0080) /* TI1 Selection */ -#define TIM_CR2_OIS1 ((u16)0x0100) /* Output Idle state 1 (OC1 output) */ -#define TIM_CR2_OIS1N ((u16)0x0200) /* Output Idle state 1 (OC1N output) */ -#define TIM_CR2_OIS2 ((u16)0x0400) /* Output Idle state 2 (OC2 output) */ -#define TIM_CR2_OIS2N ((u16)0x0800) /* Output Idle state 2 (OC2N output) */ -#define TIM_CR2_OIS3 ((u16)0x1000) /* Output Idle state 3 (OC3 output) */ -#define TIM_CR2_OIS3N ((u16)0x2000) /* Output Idle state 3 (OC3N output) */ -#define TIM_CR2_OIS4 ((u16)0x4000) /* Output Idle state 4 (OC4 output) */ - - -/******************* Bit definition for TIM_SMCR register *******************/ -#define TIM_SMCR_SMS ((u16)0x0007) /* SMS[2:0] bits (Slave mode selection) */ -#define TIM_SMCR_SMS_0 ((u16)0x0001) /* Bit 0 */ -#define TIM_SMCR_SMS_1 ((u16)0x0002) /* Bit 1 */ -#define TIM_SMCR_SMS_2 ((u16)0x0004) /* Bit 2 */ - -#define TIM_SMCR_TS ((u16)0x0070) /* TS[2:0] bits (Trigger selection) */ -#define TIM_SMCR_TS_0 ((u16)0x0010) /* Bit 0 */ -#define TIM_SMCR_TS_1 ((u16)0x0020) /* Bit 1 */ -#define TIM_SMCR_TS_2 ((u16)0x0040) /* Bit 2 */ - -#define TIM_SMCR_MSM ((u16)0x0080) /* Master/slave mode */ - -#define TIM_SMCR_ETF ((u16)0x0F00) /* ETF[3:0] bits (External trigger filter) */ -#define TIM_SMCR_ETF_0 ((u16)0x0100) /* Bit 0 */ -#define TIM_SMCR_ETF_1 ((u16)0x0200) /* Bit 1 */ -#define TIM_SMCR_ETF_2 ((u16)0x0400) /* Bit 2 */ -#define TIM_SMCR_ETF_3 ((u16)0x0800) /* Bit 3 */ - -#define TIM_SMCR_ETPS ((u16)0x3000) /* ETPS[1:0] bits (External trigger prescaler) */ -#define TIM_SMCR_ETPS_0 ((u16)0x1000) /* Bit 0 */ -#define TIM_SMCR_ETPS_1 ((u16)0x2000) /* Bit 1 */ - -#define TIM_SMCR_ECE ((u16)0x4000) /* External clock enable */ -#define TIM_SMCR_ETP ((u16)0x8000) /* External trigger polarity */ - - -/******************* Bit definition for TIM_DIER register *******************/ -#define TIM_DIER_UIE ((u16)0x0001) /* Update interrupt enable */ -#define TIM_DIER_CC1IE ((u16)0x0002) /* Capture/Compare 1 interrupt enable */ -#define TIM_DIER_CC2IE ((u16)0x0004) /* Capture/Compare 2 interrupt enable */ -#define TIM_DIER_CC3IE ((u16)0x0008) /* Capture/Compare 3 interrupt enable */ -#define TIM_DIER_CC4IE ((u16)0x0010) /* Capture/Compare 4 interrupt enable */ -#define TIM_DIER_COMIE ((u16)0x0020) /* COM interrupt enable */ -#define TIM_DIER_TIE ((u16)0x0040) /* Trigger interrupt enable */ -#define TIM_DIER_BIE ((u16)0x0080) /* Break interrupt enable */ -#define TIM_DIER_UDE ((u16)0x0100) /* Update DMA request enable */ -#define TIM_DIER_CC1DE ((u16)0x0200) /* Capture/Compare 1 DMA request enable */ -#define TIM_DIER_CC2DE ((u16)0x0400) /* Capture/Compare 2 DMA request enable */ -#define TIM_DIER_CC3DE ((u16)0x0800) /* Capture/Compare 3 DMA request enable */ -#define TIM_DIER_CC4DE ((u16)0x1000) /* Capture/Compare 4 DMA request enable */ -#define TIM_DIER_COMDE ((u16)0x2000) /* COM DMA request enable */ -#define TIM_DIER_TDE ((u16)0x4000) /* Trigger DMA request enable */ - - -/******************** Bit definition for TIM_SR register ********************/ -#define TIM_SR_UIF ((u16)0x0001) /* Update interrupt Flag */ -#define TIM_SR_CC1IF ((u16)0x0002) /* Capture/Compare 1 interrupt Flag */ -#define TIM_SR_CC2IF ((u16)0x0004) /* Capture/Compare 2 interrupt Flag */ -#define TIM_SR_CC3IF ((u16)0x0008) /* Capture/Compare 3 interrupt Flag */ -#define TIM_SR_CC4IF ((u16)0x0010) /* Capture/Compare 4 interrupt Flag */ -#define TIM_SR_COMIF ((u16)0x0020) /* COM interrupt Flag */ -#define TIM_SR_TIF ((u16)0x0040) /* Trigger interrupt Flag */ -#define TIM_SR_BIF ((u16)0x0080) /* Break interrupt Flag */ -#define TIM_SR_CC1OF ((u16)0x0200) /* Capture/Compare 1 Overcapture Flag */ -#define TIM_SR_CC2OF ((u16)0x0400) /* Capture/Compare 2 Overcapture Flag */ -#define TIM_SR_CC3OF ((u16)0x0800) /* Capture/Compare 3 Overcapture Flag */ -#define TIM_SR_CC4OF ((u16)0x1000) /* Capture/Compare 4 Overcapture Flag */ - - -/******************* Bit definition for TIM_EGR register ********************/ -#define TIM_EGR_UG ((u8)0x01) /* Update Generation */ -#define TIM_EGR_CC1G ((u8)0x02) /* Capture/Compare 1 Generation */ -#define TIM_EGR_CC2G ((u8)0x04) /* Capture/Compare 2 Generation */ -#define TIM_EGR_CC3G ((u8)0x08) /* Capture/Compare 3 Generation */ -#define TIM_EGR_CC4G ((u8)0x10) /* Capture/Compare 4 Generation */ -#define TIM_EGR_COMG ((u8)0x20) /* Capture/Compare Control Update Generation */ -#define TIM_EGR_TG ((u8)0x40) /* Trigger Generation */ -#define TIM_EGR_BG ((u8)0x80) /* Break Generation */ - - -/****************** Bit definition for TIM_CCMR1 register *******************/ -#define TIM_CCMR1_CC1S ((u16)0x0003) /* CC1S[1:0] bits (Capture/Compare 1 Selection) */ -#define TIM_CCMR1_CC1S_0 ((u16)0x0001) /* Bit 0 */ -#define TIM_CCMR1_CC1S_1 ((u16)0x0002) /* Bit 1 */ - -#define TIM_CCMR1_OC1FE ((u16)0x0004) /* Output Compare 1 Fast enable */ -#define TIM_CCMR1_OC1PE ((u16)0x0008) /* Output Compare 1 Preload enable */ - -#define TIM_CCMR1_OC1M ((u16)0x0070) /* OC1M[2:0] bits (Output Compare 1 Mode) */ -#define TIM_CCMR1_OC1M_0 ((u16)0x0010) /* Bit 0 */ -#define TIM_CCMR1_OC1M_1 ((u16)0x0020) /* Bit 1 */ -#define TIM_CCMR1_OC1M_2 ((u16)0x0040) /* Bit 2 */ - -#define TIM_CCMR1_OC1CE ((u16)0x0080) /* Output Compare 1Clear Enable */ - -#define TIM_CCMR1_CC2S ((u16)0x0300) /* CC2S[1:0] bits (Capture/Compare 2 Selection) */ -#define TIM_CCMR1_CC2S_0 ((u16)0x0100) /* Bit 0 */ -#define TIM_CCMR1_CC2S_1 ((u16)0x0200) /* Bit 1 */ - -#define TIM_CCMR1_OC2FE ((u16)0x0400) /* Output Compare 2 Fast enable */ -#define TIM_CCMR1_OC2PE ((u16)0x0800) /* Output Compare 2 Preload enable */ - -#define TIM_CCMR1_OC2M ((u16)0x7000) /* OC2M[2:0] bits (Output Compare 2 Mode) */ -#define TIM_CCMR1_OC2M_0 ((u16)0x1000) /* Bit 0 */ -#define TIM_CCMR1_OC2M_1 ((u16)0x2000) /* Bit 1 */ -#define TIM_CCMR1_OC2M_2 ((u16)0x4000) /* Bit 2 */ - -#define TIM_CCMR1_OC2CE ((u16)0x8000) /* Output Compare 2 Clear Enable */ - -/*----------------------------------------------------------------------------*/ - -#define TIM_CCMR1_IC1PSC ((u16)0x000C) /* IC1PSC[1:0] bits (Input Capture 1 Prescaler) */ -#define TIM_CCMR1_IC1PSC_0 ((u16)0x0004) /* Bit 0 */ -#define TIM_CCMR1_IC1PSC_1 ((u16)0x0008) /* Bit 1 */ - -#define TIM_CCMR1_IC1F ((u16)0x00F0) /* IC1F[3:0] bits (Input Capture 1 Filter) */ -#define TIM_CCMR1_IC1F_0 ((u16)0x0010) /* Bit 0 */ -#define TIM_CCMR1_IC1F_1 ((u16)0x0020) /* Bit 1 */ -#define TIM_CCMR1_IC1F_2 ((u16)0x0040) /* Bit 2 */ -#define TIM_CCMR1_IC1F_3 ((u16)0x0080) /* Bit 3 */ - -#define TIM_CCMR1_IC2PSC ((u16)0x0C00) /* IC2PSC[1:0] bits (Input Capture 2 Prescaler) */ -#define TIM_CCMR1_IC2PSC_0 ((u16)0x0400) /* Bit 0 */ -#define TIM_CCMR1_IC2PSC_1 ((u16)0x0800) /* Bit 1 */ - -#define TIM_CCMR1_IC2F ((u16)0xF000) /* IC2F[3:0] bits (Input Capture 2 Filter) */ -#define TIM_CCMR1_IC2F_0 ((u16)0x1000) /* Bit 0 */ -#define TIM_CCMR1_IC2F_1 ((u16)0x2000) /* Bit 1 */ -#define TIM_CCMR1_IC2F_2 ((u16)0x4000) /* Bit 2 */ -#define TIM_CCMR1_IC2F_3 ((u16)0x8000) /* Bit 3 */ - - -/****************** Bit definition for TIM_CCMR2 register *******************/ -#define TIM_CCMR2_CC3S ((u16)0x0003) /* CC3S[1:0] bits (Capture/Compare 3 Selection) */ -#define TIM_CCMR2_CC3S_0 ((u16)0x0001) /* Bit 0 */ -#define TIM_CCMR2_CC3S_1 ((u16)0x0002) /* Bit 1 */ - -#define TIM_CCMR2_OC3FE ((u16)0x0004) /* Output Compare 3 Fast enable */ -#define TIM_CCMR2_OC3PE ((u16)0x0008) /* Output Compare 3 Preload enable */ - -#define TIM_CCMR2_OC3M ((u16)0x0070) /* OC3M[2:0] bits (Output Compare 3 Mode) */ -#define TIM_CCMR2_OC3M_0 ((u16)0x0010) /* Bit 0 */ -#define TIM_CCMR2_OC3M_1 ((u16)0x0020) /* Bit 1 */ -#define TIM_CCMR2_OC3M_2 ((u16)0x0040) /* Bit 2 */ - -#define TIM_CCMR2_OC3CE ((u16)0x0080) /* Output Compare 3 Clear Enable */ - -#define TIM_CCMR2_CC4S ((u16)0x0300) /* CC4S[1:0] bits (Capture/Compare 4 Selection) */ -#define TIM_CCMR2_CC4S_0 ((u16)0x0100) /* Bit 0 */ -#define TIM_CCMR2_CC4S_1 ((u16)0x0200) /* Bit 1 */ - -#define TIM_CCMR2_OC4FE ((u16)0x0400) /* Output Compare 4 Fast enable */ -#define TIM_CCMR2_OC4PE ((u16)0x0800) /* Output Compare 4 Preload enable */ - -#define TIM_CCMR2_OC4M ((u16)0x7000) /* OC4M[2:0] bits (Output Compare 4 Mode) */ -#define TIM_CCMR2_OC4M_0 ((u16)0x1000) /* Bit 0 */ -#define TIM_CCMR2_OC4M_1 ((u16)0x2000) /* Bit 1 */ -#define TIM_CCMR2_OC4M_2 ((u16)0x4000) /* Bit 2 */ - -#define TIM_CCMR2_OC4CE ((u16)0x8000) /* Output Compare 4 Clear Enable */ - -/*----------------------------------------------------------------------------*/ - -#define TIM_CCMR2_IC3PSC ((u16)0x000C) /* IC3PSC[1:0] bits (Input Capture 3 Prescaler) */ -#define TIM_CCMR2_IC3PSC_0 ((u16)0x0004) /* Bit 0 */ -#define TIM_CCMR2_IC3PSC_1 ((u16)0x0008) /* Bit 1 */ - -#define TIM_CCMR2_IC3F ((u16)0x00F0) /* IC3F[3:0] bits (Input Capture 3 Filter) */ -#define TIM_CCMR2_IC3F_0 ((u16)0x0010) /* Bit 0 */ -#define TIM_CCMR2_IC3F_1 ((u16)0x0020) /* Bit 1 */ -#define TIM_CCMR2_IC3F_2 ((u16)0x0040) /* Bit 2 */ -#define TIM_CCMR2_IC3F_3 ((u16)0x0080) /* Bit 3 */ - -#define TIM_CCMR2_IC4PSC ((u16)0x0C00) /* IC4PSC[1:0] bits (Input Capture 4 Prescaler) */ -#define TIM_CCMR2_IC4PSC_0 ((u16)0x0400) /* Bit 0 */ -#define TIM_CCMR2_IC4PSC_1 ((u16)0x0800) /* Bit 1 */ - -#define TIM_CCMR2_IC4F ((u16)0xF000) /* IC4F[3:0] bits (Input Capture 4 Filter) */ -#define TIM_CCMR2_IC4F_0 ((u16)0x1000) /* Bit 0 */ -#define TIM_CCMR2_IC4F_1 ((u16)0x2000) /* Bit 1 */ -#define TIM_CCMR2_IC4F_2 ((u16)0x4000) /* Bit 2 */ -#define TIM_CCMR2_IC4F_3 ((u16)0x8000) /* Bit 3 */ - - -/******************* Bit definition for TIM_CCER register *******************/ -#define TIM_CCER_CC1E ((u16)0x0001) /* Capture/Compare 1 output enable */ -#define TIM_CCER_CC1P ((u16)0x0002) /* Capture/Compare 1 output Polarity */ -#define TIM_CCER_CC1NE ((u16)0x0004) /* Capture/Compare 1 Complementary output enable */ -#define TIM_CCER_CC1NP ((u16)0x0008) /* Capture/Compare 1 Complementary output Polarity */ -#define TIM_CCER_CC2E ((u16)0x0010) /* Capture/Compare 2 output enable */ -#define TIM_CCER_CC2P ((u16)0x0020) /* Capture/Compare 2 output Polarity */ -#define TIM_CCER_CC2NE ((u16)0x0040) /* Capture/Compare 2 Complementary output enable */ -#define TIM_CCER_CC2NP ((u16)0x0080) /* Capture/Compare 2 Complementary output Polarity */ -#define TIM_CCER_CC3E ((u16)0x0100) /* Capture/Compare 3 output enable */ -#define TIM_CCER_CC3P ((u16)0x0200) /* Capture/Compare 3 output Polarity */ -#define TIM_CCER_CC3NE ((u16)0x0400) /* Capture/Compare 3 Complementary output enable */ -#define TIM_CCER_CC3NP ((u16)0x0800) /* Capture/Compare 3 Complementary output Polarity */ -#define TIM_CCER_CC4E ((u16)0x1000) /* Capture/Compare 4 output enable */ -#define TIM_CCER_CC4P ((u16)0x2000) /* Capture/Compare 4 output Polarity */ - - -/******************* Bit definition for TIM_CNT register ********************/ -#define TIM_CNT_CNT ((u16)0xFFFF) /* Counter Value */ - - -/******************* Bit definition for TIM_PSC register ********************/ -#define TIM_PSC_PSC ((u16)0xFFFF) /* Prescaler Value */ - - -/******************* Bit definition for TIM_ARR register ********************/ -#define TIM_ARR_ARR ((u16)0xFFFF) /* actual auto-reload Value */ - - -/******************* Bit definition for TIM_RCR register ********************/ -#define TIM_RCR_REP ((u8)0xFF) /* Repetition Counter Value */ - - -/******************* Bit definition for TIM_CCR1 register *******************/ -#define TIM_CCR1_CCR1 ((u16)0xFFFF) /* Capture/Compare 1 Value */ - - -/******************* Bit definition for TIM_CCR2 register *******************/ -#define TIM_CCR2_CCR2 ((u16)0xFFFF) /* Capture/Compare 2 Value */ - - -/******************* Bit definition for TIM_CCR3 register *******************/ -#define TIM_CCR3_CCR3 ((u16)0xFFFF) /* Capture/Compare 3 Value */ - - -/******************* Bit definition for TIM_CCR4 register *******************/ -#define TIM_CCR4_CCR4 ((u16)0xFFFF) /* Capture/Compare 4 Value */ - - -/******************* Bit definition for TIM_BDTR register *******************/ -#define TIM_BDTR_DTG ((u16)0x00FF) /* DTG[0:7] bits (Dead-Time Generator set-up) */ -#define TIM_BDTR_DTG_0 ((u16)0x0001) /* Bit 0 */ -#define TIM_BDTR_DTG_1 ((u16)0x0002) /* Bit 1 */ -#define TIM_BDTR_DTG_2 ((u16)0x0004) /* Bit 2 */ -#define TIM_BDTR_DTG_3 ((u16)0x0008) /* Bit 3 */ -#define TIM_BDTR_DTG_4 ((u16)0x0010) /* Bit 4 */ -#define TIM_BDTR_DTG_5 ((u16)0x0020) /* Bit 5 */ -#define TIM_BDTR_DTG_6 ((u16)0x0040) /* Bit 6 */ -#define TIM_BDTR_DTG_7 ((u16)0x0080) /* Bit 7 */ - -#define TIM_BDTR_LOCK ((u16)0x0300) /* LOCK[1:0] bits (Lock Configuration) */ -#define TIM_BDTR_LOCK_0 ((u16)0x0100) /* Bit 0 */ -#define TIM_BDTR_LOCK_1 ((u16)0x0200) /* Bit 1 */ - -#define TIM_BDTR_OSSI ((u16)0x0400) /* Off-State Selection for Idle mode */ -#define TIM_BDTR_OSSR ((u16)0x0800) /* Off-State Selection for Run mode */ -#define TIM_BDTR_BKE ((u16)0x1000) /* Break enable */ -#define TIM_BDTR_BKP ((u16)0x2000) /* Break Polarity */ -#define TIM_BDTR_AOE ((u16)0x4000) /* Automatic Output enable */ -#define TIM_BDTR_MOE ((u16)0x8000) /* Main Output enable */ - - -/******************* Bit definition for TIM_DCR register ********************/ -#define TIM_DCR_DBA ((u16)0x001F) /* DBA[4:0] bits (DMA Base Address) */ -#define TIM_DCR_DBA_0 ((u16)0x0001) /* Bit 0 */ -#define TIM_DCR_DBA_1 ((u16)0x0002) /* Bit 1 */ -#define TIM_DCR_DBA_2 ((u16)0x0004) /* Bit 2 */ -#define TIM_DCR_DBA_3 ((u16)0x0008) /* Bit 3 */ -#define TIM_DCR_DBA_4 ((u16)0x0010) /* Bit 4 */ - -#define TIM_DCR_DBL ((u16)0x1F00) /* DBL[4:0] bits (DMA Burst Length) */ -#define TIM_DCR_DBL_0 ((u16)0x0100) /* Bit 0 */ -#define TIM_DCR_DBL_1 ((u16)0x0200) /* Bit 1 */ -#define TIM_DCR_DBL_2 ((u16)0x0400) /* Bit 2 */ -#define TIM_DCR_DBL_3 ((u16)0x0800) /* Bit 3 */ -#define TIM_DCR_DBL_4 ((u16)0x1000) /* Bit 4 */ - - -/******************* Bit definition for TIM_DMAR register *******************/ -#define TIM_DMAR_DMAB ((u16)0xFFFF) /* DMA register for burst accesses */ - - - -/******************************************************************************/ -/* */ -/* Real-Time Clock */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for RTC_CRH register ********************/ -#define RTC_CRH_SECIE ((u8)0x01) /* Second Interrupt Enable */ -#define RTC_CRH_ALRIE ((u8)0x02) /* Alarm Interrupt Enable */ -#define RTC_CRH_OWIE ((u8)0x04) /* OverfloW Interrupt Enable */ - - -/******************* Bit definition for RTC_CRL register ********************/ -#define RTC_CRL_SECF ((u8)0x01) /* Second Flag */ -#define RTC_CRL_ALRF ((u8)0x02) /* Alarm Flag */ -#define RTC_CRL_OWF ((u8)0x04) /* OverfloW Flag */ -#define RTC_CRL_RSF ((u8)0x08) /* Registers Synchronized Flag */ -#define RTC_CRL_CNF ((u8)0x10) /* Configuration Flag */ -#define RTC_CRL_RTOFF ((u8)0x20) /* RTC operation OFF */ - - -/******************* Bit definition for RTC_PRLH register *******************/ -#define RTC_PRLH_PRL ((u16)0x000F) /* RTC Prescaler Reload Value High */ - - -/******************* Bit definition for RTC_PRLL register *******************/ -#define RTC_PRLL_PRL ((u16)0xFFFF) /* RTC Prescaler Reload Value Low */ - - -/******************* Bit definition for RTC_DIVH register *******************/ -#define RTC_DIVH_RTC_DIV ((u16)0x000F) /* RTC Clock Divider High */ - - -/******************* Bit definition for RTC_DIVL register *******************/ -#define RTC_DIVL_RTC_DIV ((u16)0xFFFF) /* RTC Clock Divider Low */ - - -/******************* Bit definition for RTC_CNTH register *******************/ -#define RTC_CNTH_RTC_CNT ((u16)0xFFFF) /* RTC Counter High */ - - -/******************* Bit definition for RTC_CNTL register *******************/ -#define RTC_CNTL_RTC_CNT ((u16)0xFFFF) /* RTC Counter Low */ - - -/******************* Bit definition for RTC_ALRH register *******************/ -#define RTC_ALRH_RTC_ALR ((u16)0xFFFF) /* RTC Alarm High */ - - -/******************* Bit definition for RTC_ALRL register *******************/ -#define RTC_ALRL_RTC_ALR ((u16)0xFFFF) /* RTC Alarm Low */ - - - -/******************************************************************************/ -/* */ -/* Independent WATCHDOG */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for IWDG_KR register ********************/ -#define IWDG_KR_KEY ((u16)0xFFFF) /* Key value (write only, read 0000h) */ - - -/******************* Bit definition for IWDG_PR register ********************/ -#define IWDG_PR_PR ((u8)0x07) /* PR[2:0] (Prescaler divider) */ -#define IWDG_PR_PR_0 ((u8)0x01) /* Bit 0 */ -#define IWDG_PR_PR_1 ((u8)0x02) /* Bit 1 */ -#define IWDG_PR_PR_2 ((u8)0x04) /* Bit 2 */ - - -/******************* Bit definition for IWDG_RLR register *******************/ -#define IWDG_RLR_RL ((u16)0x0FFF) /* Watchdog counter reload value */ - - -/******************* Bit definition for IWDG_SR register ********************/ -#define IWDG_SR_PVU ((u8)0x01) /* Watchdog prescaler value update */ -#define IWDG_SR_RVU ((u8)0x02) /* Watchdog counter reload value update */ - - - -/******************************************************************************/ -/* */ -/* Window WATCHDOG */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for WWDG_CR register ********************/ -#define WWDG_CR_T ((u8)0x7F) /* T[6:0] bits (7-Bit counter (MSB to LSB)) */ -#define WWDG_CR_T0 ((u8)0x01) /* Bit 0 */ -#define WWDG_CR_T1 ((u8)0x02) /* Bit 1 */ -#define WWDG_CR_T2 ((u8)0x04) /* Bit 2 */ -#define WWDG_CR_T3 ((u8)0x08) /* Bit 3 */ -#define WWDG_CR_T4 ((u8)0x10) /* Bit 4 */ -#define WWDG_CR_T5 ((u8)0x20) /* Bit 5 */ -#define WWDG_CR_T6 ((u8)0x40) /* Bit 6 */ - -#define WWDG_CR_WDGA ((u8)0x80) /* Activation bit */ - - -/******************* Bit definition for WWDG_CFR register *******************/ -#define WWDG_CFR_W ((u16)0x007F) /* W[6:0] bits (7-bit window value) */ -#define WWDG_CFR_W0 ((u16)0x0001) /* Bit 0 */ -#define WWDG_CFR_W1 ((u16)0x0002) /* Bit 1 */ -#define WWDG_CFR_W2 ((u16)0x0004) /* Bit 2 */ -#define WWDG_CFR_W3 ((u16)0x0008) /* Bit 3 */ -#define WWDG_CFR_W4 ((u16)0x0010) /* Bit 4 */ -#define WWDG_CFR_W5 ((u16)0x0020) /* Bit 5 */ -#define WWDG_CFR_W6 ((u16)0x0040) /* Bit 6 */ - -#define WWDG_CFR_WDGTB ((u16)0x0180) /* WDGTB[1:0] bits (Timer Base) */ -#define WWDG_CFR_WDGTB0 ((u16)0x0080) /* Bit 0 */ -#define WWDG_CFR_WDGTB1 ((u16)0x0100) /* Bit 1 */ - -#define WWDG_CFR_EWI ((u16)0x0200) /* Early Wakeup Interrupt */ - - -/******************* Bit definition for WWDG_SR register ********************/ -#define WWDG_SR_EWIF ((u8)0x01) /* Early Wakeup Interrupt Flag */ - - - -/******************************************************************************/ -/* */ -/* Flexible Static Memory Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for FSMC_BCR1 register *******************/ -#define FSMC_BCR1_MBKEN ((u32)0x00000001) /* Memory bank enable bit */ -#define FSMC_BCR1_MUXEN ((u32)0x00000002) /* Address/data multiplexing enable bit */ - -#define FSMC_BCR1_MTYP ((u32)0x0000000C) /* MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR1_MTYP_0 ((u32)0x00000004) /* Bit 0 */ -#define FSMC_BCR1_MTYP_1 ((u32)0x00000008) /* Bit 1 */ - -#define FSMC_BCR1_MWID ((u32)0x00000030) /* MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR1_MWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BCR1_MWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_BCR1_FACCEN ((u32)0x00000040) /* Flash access enable */ -#define FSMC_BCR1_BURSTEN ((u32)0x00000100) /* Burst enable bit */ -#define FSMC_BCR1_WAITPOL ((u32)0x00000200) /* Wait signal polarity bit */ -#define FSMC_BCR1_WRAPMOD ((u32)0x00000400) /* Wrapped burst mode support */ -#define FSMC_BCR1_WAITCFG ((u32)0x00000800) /* Wait timing configuration */ -#define FSMC_BCR1_WREN ((u32)0x00001000) /* Write enable bit */ -#define FSMC_BCR1_WAITEN ((u32)0x00002000) /* Wait enable bit */ -#define FSMC_BCR1_EXTMOD ((u32)0x00004000) /* Extended mode enable */ -#define FSMC_BCR1_CBURSTRW ((u32)0x00080000) /* Write burst enable */ - - -/****************** Bit definition for FSMC_BCR2 register *******************/ -#define FSMC_BCR2_MBKEN ((u32)0x00000001) /* Memory bank enable bit */ -#define FSMC_BCR2_MUXEN ((u32)0x00000002) /* Address/data multiplexing enable bit */ - -#define FSMC_BCR2_MTYP ((u32)0x0000000C) /* MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR2_MTYP_0 ((u32)0x00000004) /* Bit 0 */ -#define FSMC_BCR2_MTYP_1 ((u32)0x00000008) /* Bit 1 */ - -#define FSMC_BCR2_MWID ((u32)0x00000030) /* MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR2_MWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BCR2_MWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_BCR2_FACCEN ((u32)0x00000040) /* Flash access enable */ -#define FSMC_BCR2_BURSTEN ((u32)0x00000100) /* Burst enable bit */ -#define FSMC_BCR2_WAITPOL ((u32)0x00000200) /* Wait signal polarity bit */ -#define FSMC_BCR2_WRAPMOD ((u32)0x00000400) /* Wrapped burst mode support */ -#define FSMC_BCR2_WAITCFG ((u32)0x00000800) /* Wait timing configuration */ -#define FSMC_BCR2_WREN ((u32)0x00001000) /* Write enable bit */ -#define FSMC_BCR2_WAITEN ((u32)0x00002000) /* Wait enable bit */ -#define FSMC_BCR2_EXTMOD ((u32)0x00004000) /* Extended mode enable */ -#define FSMC_BCR2_CBURSTRW ((u32)0x00080000) /* Write burst enable */ - - -/****************** Bit definition for FSMC_BCR3 register *******************/ -#define FSMC_BCR3_MBKEN ((u32)0x00000001) /* Memory bank enable bit */ -#define FSMC_BCR3_MUXEN ((u32)0x00000002) /* Address/data multiplexing enable bit */ - -#define FSMC_BCR3_MTYP ((u32)0x0000000C) /* MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR3_MTYP_0 ((u32)0x00000004) /* Bit 0 */ -#define FSMC_BCR3_MTYP_1 ((u32)0x00000008) /* Bit 1 */ - -#define FSMC_BCR3_MWID ((u32)0x00000030) /* MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR3_MWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BCR3_MWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_BCR3_FACCEN ((u32)0x00000040) /* Flash access enable */ -#define FSMC_BCR3_BURSTEN ((u32)0x00000100) /* Burst enable bit */ -#define FSMC_BCR3_WAITPOL ((u32)0x00000200) /* Wait signal polarity bit. */ -#define FSMC_BCR3_WRAPMOD ((u32)0x00000400) /* Wrapped burst mode support */ -#define FSMC_BCR3_WAITCFG ((u32)0x00000800) /* Wait timing configuration */ -#define FSMC_BCR3_WREN ((u32)0x00001000) /* Write enable bit */ -#define FSMC_BCR3_WAITEN ((u32)0x00002000) /* Wait enable bit */ -#define FSMC_BCR3_EXTMOD ((u32)0x00004000) /* Extended mode enable */ -#define FSMC_BCR3_CBURSTRW ((u32)0x00080000) /* Write burst enable */ - - -/****************** Bit definition for FSMC_BCR4 register *******************/ -#define FSMC_BCR4_MBKEN ((u32)0x00000001) /* Memory bank enable bit */ -#define FSMC_BCR4_MUXEN ((u32)0x00000002) /* Address/data multiplexing enable bit */ - -#define FSMC_BCR4_MTYP ((u32)0x0000000C) /* MTYP[1:0] bits (Memory type) */ -#define FSMC_BCR4_MTYP_0 ((u32)0x00000004) /* Bit 0 */ -#define FSMC_BCR4_MTYP_1 ((u32)0x00000008) /* Bit 1 */ - -#define FSMC_BCR4_MWID ((u32)0x00000030) /* MWID[1:0] bits (Memory data bus width) */ -#define FSMC_BCR4_MWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BCR4_MWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_BCR4_FACCEN ((u32)0x00000040) /* Flash access enable */ -#define FSMC_BCR4_BURSTEN ((u32)0x00000100) /* Burst enable bit */ -#define FSMC_BCR4_WAITPOL ((u32)0x00000200) /* Wait signal polarity bit */ -#define FSMC_BCR4_WRAPMOD ((u32)0x00000400) /* Wrapped burst mode support */ -#define FSMC_BCR4_WAITCFG ((u32)0x00000800) /* Wait timing configuration */ -#define FSMC_BCR4_WREN ((u32)0x00001000) /* Write enable bit */ -#define FSMC_BCR4_WAITEN ((u32)0x00002000) /* Wait enable bit */ -#define FSMC_BCR4_EXTMOD ((u32)0x00004000) /* Extended mode enable */ -#define FSMC_BCR4_CBURSTRW ((u32)0x00080000) /* Write burst enable */ - - -/****************** Bit definition for FSMC_BTR1 register ******************/ -#define FSMC_BTR1_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR1_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BTR1_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BTR1_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BTR1_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BTR1_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR1_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BTR1_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BTR1_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BTR1_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BTR1_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR1_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BTR1_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BTR1_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BTR1_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BTR1_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR1_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BTR1_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BTR1_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BTR1_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BTR1_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR1_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BTR1_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BTR1_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BTR1_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BTR1_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR1_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BTR1_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BTR1_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BTR1_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BTR1_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR1_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BTR1_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_BTR2 register *******************/ -#define FSMC_BTR2_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR2_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BTR2_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BTR2_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BTR2_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BTR2_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR2_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BTR2_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BTR2_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BTR2_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BTR2_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR2_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BTR2_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BTR2_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BTR2_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BTR2_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR2_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BTR2_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BTR2_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BTR2_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BTR2_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR2_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BTR2_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BTR2_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BTR2_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BTR2_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR2_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BTR2_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BTR2_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BTR2_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BTR2_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR2_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BTR2_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/******************* Bit definition for FSMC_BTR3 register *******************/ -#define FSMC_BTR3_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR3_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BTR3_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BTR3_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BTR3_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BTR3_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR3_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BTR3_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BTR3_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BTR3_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BTR3_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR3_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BTR3_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BTR3_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BTR3_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BTR3_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR3_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BTR3_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BTR3_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BTR3_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BTR3_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR3_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BTR3_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BTR3_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BTR3_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BTR3_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR3_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BTR3_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BTR3_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BTR3_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BTR3_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR3_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BTR3_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_BTR4 register *******************/ -#define FSMC_BTR4_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BTR4_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BTR4_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BTR4_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BTR4_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BTR4_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BTR4_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BTR4_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BTR4_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BTR4_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BTR4_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BTR4_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BTR4_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BTR4_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BTR4_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BTR4_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BTR4_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BTR4_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BTR4_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BTR4_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BTR4_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BTR4_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BTR4_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BTR4_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BTR4_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BTR4_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BTR4_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BTR4_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BTR4_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BTR4_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BTR4_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BTR4_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BTR4_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_BWTR1 register ******************/ -#define FSMC_BWTR1_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR1_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BWTR1_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BWTR1_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BWTR1_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BWTR1_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR1_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BWTR1_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BWTR1_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BWTR1_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BWTR1_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR1_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BWTR1_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BWTR1_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BWTR1_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BWTR1_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BWTR1_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BWTR1_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BWTR1_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BWTR1_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BWTR1_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR1_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BWTR1_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BWTR1_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BWTR1_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BWTR1_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR1_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BWTR1_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BWTR1_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BWTR1_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BWTR1_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR1_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BWTR1_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_BWTR2 register ******************/ -#define FSMC_BWTR2_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR2_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BWTR2_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BWTR2_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BWTR2_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BWTR2_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR2_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BWTR2_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BWTR2_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BWTR2_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BWTR2_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR2_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BWTR2_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BWTR2_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BWTR2_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BWTR2_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BWTR2_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BWTR2_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BWTR2_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BWTR2_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BWTR2_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR2_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BWTR2_CLKDIV_1 ((u32)0x00200000) /* Bit 1*/ -#define FSMC_BWTR2_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BWTR2_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BWTR2_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR2_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BWTR2_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BWTR2_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BWTR2_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BWTR2_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR2_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BWTR2_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_BWTR3 register ******************/ -#define FSMC_BWTR3_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR3_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BWTR3_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BWTR3_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BWTR3_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BWTR3_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR3_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BWTR3_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BWTR3_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BWTR3_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BWTR3_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR3_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BWTR3_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BWTR3_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BWTR3_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BWTR3_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BWTR3_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BWTR3_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BWTR3_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BWTR3_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BWTR3_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR3_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BWTR3_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BWTR3_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BWTR3_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BWTR3_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR3_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BWTR3_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BWTR3_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BWTR3_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BWTR3_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR3_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BWTR3_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_BWTR4 register ******************/ -#define FSMC_BWTR4_ADDSET ((u32)0x0000000F) /* ADDSET[3:0] bits (Address setup phase duration) */ -#define FSMC_BWTR4_ADDSET_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_BWTR4_ADDSET_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_BWTR4_ADDSET_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_BWTR4_ADDSET_3 ((u32)0x00000008) /* Bit 3 */ - -#define FSMC_BWTR4_ADDHLD ((u32)0x000000F0) /* ADDHLD[3:0] bits (Address-hold phase duration) */ -#define FSMC_BWTR4_ADDHLD_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_BWTR4_ADDHLD_1 ((u32)0x00000020) /* Bit 1 */ -#define FSMC_BWTR4_ADDHLD_2 ((u32)0x00000040) /* Bit 2 */ -#define FSMC_BWTR4_ADDHLD_3 ((u32)0x00000080) /* Bit 3 */ - -#define FSMC_BWTR4_DATAST ((u32)0x0000FF00) /* DATAST [3:0] bits (Data-phase duration) */ -#define FSMC_BWTR4_DATAST_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_BWTR4_DATAST_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_BWTR4_DATAST_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_BWTR4_DATAST_3 ((u32)0x00000800) /* Bit 3 */ - -#define FSMC_BWTR4_BUSTURN ((u32)0x000F0000) /* BUSTURN[3:0] bits (Bus turnaround phase duration) */ -#define FSMC_BWTR4_BUSTURN_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_BWTR4_BUSTURN_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_BWTR4_BUSTURN_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_BWTR4_BUSTURN_3 ((u32)0x00080000) /* Bit 3 */ - -#define FSMC_BWTR4_CLKDIV ((u32)0x00F00000) /* CLKDIV[3:0] bits (Clock divide ratio) */ -#define FSMC_BWTR4_CLKDIV_0 ((u32)0x00100000) /* Bit 0 */ -#define FSMC_BWTR4_CLKDIV_1 ((u32)0x00200000) /* Bit 1 */ -#define FSMC_BWTR4_CLKDIV_2 ((u32)0x00400000) /* Bit 2 */ -#define FSMC_BWTR4_CLKDIV_3 ((u32)0x00800000) /* Bit 3 */ - -#define FSMC_BWTR4_DATLAT ((u32)0x0F000000) /* DATLA[3:0] bits (Data latency) */ -#define FSMC_BWTR4_DATLAT_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_BWTR4_DATLAT_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_BWTR4_DATLAT_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_BWTR4_DATLAT_3 ((u32)0x08000000) /* Bit 3 */ - -#define FSMC_BWTR4_ACCMOD ((u32)0x30000000) /* ACCMOD[1:0] bits (Access mode) */ -#define FSMC_BWTR4_ACCMOD_0 ((u32)0x10000000) /* Bit 0 */ -#define FSMC_BWTR4_ACCMOD_1 ((u32)0x20000000) /* Bit 1 */ - - -/****************** Bit definition for FSMC_PCR2 register *******************/ -#define FSMC_PCR2_PWAITEN ((u32)0x00000002) /* Wait feature enable bit */ -#define FSMC_PCR2_PBKEN ((u32)0x00000004) /* PC Card/NAND Flash memory bank enable bit */ -#define FSMC_PCR2_PTYP ((u32)0x00000008) /* Memory type */ - -#define FSMC_PCR2_PWID ((u32)0x00000030) /* PWID[1:0] bits (NAND Flash databus width) */ -#define FSMC_PCR2_PWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_PCR2_PWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_PCR2_ECCEN ((u32)0x00000040) /* ECC computation logic enable bit */ -#define FSMC_PCR2_ADLOW ((u32)0x00000100) /* Address low bit delivery */ - -#define FSMC_PCR2_TCLR ((u32)0x00001E00) /* TCLR[3:0] bits (CLE to RE delay) */ -#define FSMC_PCR2_TCLR_0 ((u32)0x00000200) /* Bit 0 */ -#define FSMC_PCR2_TCLR_1 ((u32)0x00000400) /* Bit 1 */ -#define FSMC_PCR2_TCLR_2 ((u32)0x00000800) /* Bit 2 */ -#define FSMC_PCR2_TCLR_3 ((u32)0x00001000) /* Bit 3 */ - -#define FSMC_PCR2_TAR ((u32)0x0001E000) /* TAR[3:0] bits (ALE to RE delay) */ -#define FSMC_PCR2_TAR_0 ((u32)0x00002000) /* Bit 0 */ -#define FSMC_PCR2_TAR_1 ((u32)0x00004000) /* Bit 1 */ -#define FSMC_PCR2_TAR_2 ((u32)0x00008000) /* Bit 2 */ -#define FSMC_PCR2_TAR_3 ((u32)0x00010000) /* Bit 3 */ - -#define FSMC_PCR2_ECCPS ((u32)0x000E0000) /* ECCPS[1:0] bits (ECC page size) */ -#define FSMC_PCR2_ECCPS_0 ((u32)0x00020000) /* Bit 0 */ -#define FSMC_PCR2_ECCPS_1 ((u32)0x00040000) /* Bit 1 */ -#define FSMC_PCR2_ECCPS_2 ((u32)0x00080000) /* Bit 2 */ - - -/****************** Bit definition for FSMC_PCR3 register *******************/ -#define FSMC_PCR3_PWAITEN ((u32)0x00000002) /* Wait feature enable bit */ -#define FSMC_PCR3_PBKEN ((u32)0x00000004) /* PC Card/NAND Flash memory bank enable bit */ -#define FSMC_PCR3_PTYP ((u32)0x00000008) /* Memory type */ - -#define FSMC_PCR3_PWID ((u32)0x00000030) /* PWID[1:0] bits (NAND Flash databus width) */ -#define FSMC_PCR3_PWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_PCR3_PWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_PCR3_ECCEN ((u32)0x00000040) /* ECC computation logic enable bit */ -#define FSMC_PCR3_ADLOW ((u32)0x00000100) /* Address low bit delivery */ - -#define FSMC_PCR3_TCLR ((u32)0x00001E00) /* TCLR[3:0] bits (CLE to RE delay) */ -#define FSMC_PCR3_TCLR_0 ((u32)0x00000200) /* Bit 0 */ -#define FSMC_PCR3_TCLR_1 ((u32)0x00000400) /* Bit 1 */ -#define FSMC_PCR3_TCLR_2 ((u32)0x00000800) /* Bit 2 */ -#define FSMC_PCR3_TCLR_3 ((u32)0x00001000) /* Bit 3 */ - -#define FSMC_PCR3_TAR ((u32)0x0001E000) /* TAR[3:0] bits (ALE to RE delay) */ -#define FSMC_PCR3_TAR_0 ((u32)0x00002000) /* Bit 0 */ -#define FSMC_PCR3_TAR_1 ((u32)0x00004000) /* Bit 1 */ -#define FSMC_PCR3_TAR_2 ((u32)0x00008000) /* Bit 2 */ -#define FSMC_PCR3_TAR_3 ((u32)0x00010000) /* Bit 3 */ - -#define FSMC_PCR3_ECCPS ((u32)0x000E0000) /* ECCPS[2:0] bits (ECC page size) */ -#define FSMC_PCR3_ECCPS_0 ((u32)0x00020000) /* Bit 0 */ -#define FSMC_PCR3_ECCPS_1 ((u32)0x00040000) /* Bit 1 */ -#define FSMC_PCR3_ECCPS_2 ((u32)0x00080000) /* Bit 2 */ - - -/****************** Bit definition for FSMC_PCR4 register *******************/ -#define FSMC_PCR4_PWAITEN ((u32)0x00000002) /* Wait feature enable bit */ -#define FSMC_PCR4_PBKEN ((u32)0x00000004) /* PC Card/NAND Flash memory bank enable bit */ -#define FSMC_PCR4_PTYP ((u32)0x00000008) /* Memory type */ - -#define FSMC_PCR4_PWID ((u32)0x00000030) /* PWID[1:0] bits (NAND Flash databus width) */ -#define FSMC_PCR4_PWID_0 ((u32)0x00000010) /* Bit 0 */ -#define FSMC_PCR4_PWID_1 ((u32)0x00000020) /* Bit 1 */ - -#define FSMC_PCR4_ECCEN ((u32)0x00000040) /* ECC computation logic enable bit */ -#define FSMC_PCR4_ADLOW ((u32)0x00000100) /* Address low bit delivery */ - -#define FSMC_PCR4_TCLR ((u32)0x00001E00) /* TCLR[3:0] bits (CLE to RE delay) */ -#define FSMC_PCR4_TCLR_0 ((u32)0x00000200) /* Bit 0 */ -#define FSMC_PCR4_TCLR_1 ((u32)0x00000400) /* Bit 1 */ -#define FSMC_PCR4_TCLR_2 ((u32)0x00000800) /* Bit 2 */ -#define FSMC_PCR4_TCLR_3 ((u32)0x00001000) /* Bit 3 */ - -#define FSMC_PCR4_TAR ((u32)0x0001E000) /* TAR[3:0] bits (ALE to RE delay) */ -#define FSMC_PCR4_TAR_0 ((u32)0x00002000) /* Bit 0 */ -#define FSMC_PCR4_TAR_1 ((u32)0x00004000) /* Bit 1 */ -#define FSMC_PCR4_TAR_2 ((u32)0x00008000) /* Bit 2 */ -#define FSMC_PCR4_TAR_3 ((u32)0x00010000) /* Bit 3 */ - -#define FSMC_PCR4_ECCPS ((u32)0x000E0000) /* ECCPS[2:0] bits (ECC page size) */ -#define FSMC_PCR4_ECCPS_0 ((u32)0x00020000) /* Bit 0 */ -#define FSMC_PCR4_ECCPS_1 ((u32)0x00040000) /* Bit 1 */ -#define FSMC_PCR4_ECCPS_2 ((u32)0x00080000) /* Bit 2 */ - - -/******************* Bit definition for FSMC_SR2 register *******************/ -#define FSMC_SR2_IRS ((u8)0x01) /* Interrupt Rising Edge status */ -#define FSMC_SR2_ILS ((u8)0x02) /* Interrupt Level status */ -#define FSMC_SR2_IFS ((u8)0x04) /* Interrupt Falling Edge status */ -#define FSMC_SR2_IREN ((u8)0x08) /* Interrupt Rising Edge detection Enable bit */ -#define FSMC_SR2_ILEN ((u8)0x10) /* Interrupt Level detection Enable bit */ -#define FSMC_SR2_IFEN ((u8)0x20) /* Interrupt Falling Edge detection Enable bit */ -#define FSMC_SR2_FEMPT ((u8)0x40) /* FIFO empty */ - - -/******************* Bit definition for FSMC_SR3 register *******************/ -#define FSMC_SR3_IRS ((u8)0x01) /* Interrupt Rising Edge status */ -#define FSMC_SR3_ILS ((u8)0x02) /* Interrupt Level status */ -#define FSMC_SR3_IFS ((u8)0x04) /* Interrupt Falling Edge status */ -#define FSMC_SR3_IREN ((u8)0x08) /* Interrupt Rising Edge detection Enable bit */ -#define FSMC_SR3_ILEN ((u8)0x10) /* Interrupt Level detection Enable bit */ -#define FSMC_SR3_IFEN ((u8)0x20) /* Interrupt Falling Edge detection Enable bit */ -#define FSMC_SR3_FEMPT ((u8)0x40) /* FIFO empty */ - - -/******************* Bit definition for FSMC_SR4 register *******************/ -#define FSMC_SR4_IRS ((u8)0x01) /* Interrupt Rising Edge status */ -#define FSMC_SR4_ILS ((u8)0x02) /* Interrupt Level status */ -#define FSMC_SR4_IFS ((u8)0x04) /* Interrupt Falling Edge status */ -#define FSMC_SR4_IREN ((u8)0x08) /* Interrupt Rising Edge detection Enable bit */ -#define FSMC_SR4_ILEN ((u8)0x10) /* Interrupt Level detection Enable bit */ -#define FSMC_SR4_IFEN ((u8)0x20) /* Interrupt Falling Edge detection Enable bit */ -#define FSMC_SR4_FEMPT ((u8)0x40) /* FIFO empty */ - - -/****************** Bit definition for FSMC_PMEM2 register ******************/ -#define FSMC_PMEM2_MEMSET2 ((u32)0x000000FF) /* MEMSET2[7:0] bits (Common memory 2 setup time) */ -#define FSMC_PMEM2_MEMSET2_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PMEM2_MEMSET2_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PMEM2_MEMSET2_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PMEM2_MEMSET2_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PMEM2_MEMSET2_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PMEM2_MEMSET2_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PMEM2_MEMSET2_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PMEM2_MEMSET2_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PMEM2_MEMWAIT2 ((u32)0x0000FF00) /* MEMWAIT2[7:0] bits (Common memory 2 wait time) */ -#define FSMC_PMEM2_MEMWAIT2_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PMEM2_MEMWAIT2_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PMEM2_MEMWAIT2_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PMEM2_MEMWAIT2_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PMEM2_MEMWAIT2_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PMEM2_MEMWAIT2_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PMEM2_MEMWAIT2_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PMEM2_MEMWAIT2_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PMEM2_MEMHOLD2 ((u32)0x00FF0000) /* MEMHOLD2[7:0] bits (Common memory 2 hold time) */ -#define FSMC_PMEM2_MEMHOLD2_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PMEM2_MEMHOLD2_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PMEM2_MEMHOLD2_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PMEM2_MEMHOLD2_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PMEM2_MEMHOLD2_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PMEM2_MEMHOLD2_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PMEM2_MEMHOLD2_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PMEM2_MEMHOLD2_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PMEM2_MEMHIZ2 ((u32)0xFF000000) /* MEMHIZ2[7:0] bits (Common memory 2 databus HiZ time) */ -#define FSMC_PMEM2_MEMHIZ2_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PMEM2_MEMHIZ2_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PMEM2_MEMHIZ2_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PMEM2_MEMHIZ2_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PMEM2_MEMHIZ2_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PMEM2_MEMHIZ2_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PMEM2_MEMHIZ2_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PMEM2_MEMHIZ2_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_PMEM3 register ******************/ -#define FSMC_PMEM3_MEMSET3 ((u32)0x000000FF) /* MEMSET3[7:0] bits (Common memory 3 setup time) */ -#define FSMC_PMEM3_MEMSET3_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PMEM3_MEMSET3_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PMEM3_MEMSET3_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PMEM3_MEMSET3_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PMEM3_MEMSET3_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PMEM3_MEMSET3_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PMEM3_MEMSET3_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PMEM3_MEMSET3_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PMEM3_MEMWAIT3 ((u32)0x0000FF00) /* MEMWAIT3[7:0] bits (Common memory 3 wait time) */ -#define FSMC_PMEM3_MEMWAIT3_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PMEM3_MEMWAIT3_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PMEM3_MEMWAIT3_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PMEM3_MEMWAIT3_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PMEM3_MEMWAIT3_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PMEM3_MEMWAIT3_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PMEM3_MEMWAIT3_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PMEM3_MEMWAIT3_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PMEM3_MEMHOLD3 ((u32)0x00FF0000) /* MEMHOLD3[7:0] bits (Common memory 3 hold time) */ -#define FSMC_PMEM3_MEMHOLD3_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PMEM3_MEMHOLD3_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PMEM3_MEMHOLD3_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PMEM3_MEMHOLD3_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PMEM3_MEMHOLD3_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PMEM3_MEMHOLD3_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PMEM3_MEMHOLD3_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PMEM3_MEMHOLD3_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PMEM3_MEMHIZ3 ((u32)0xFF000000) /* MEMHIZ3[7:0] bits (Common memory 3 databus HiZ time) */ -#define FSMC_PMEM3_MEMHIZ3_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PMEM3_MEMHIZ3_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PMEM3_MEMHIZ3_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PMEM3_MEMHIZ3_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PMEM3_MEMHIZ3_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PMEM3_MEMHIZ3_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PMEM3_MEMHIZ3_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PMEM3_MEMHIZ3_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_PMEM4 register ******************/ -#define FSMC_PMEM4_MEMSET4 ((u32)0x000000FF) /* MEMSET4[7:0] bits (Common memory 4 setup time) */ -#define FSMC_PMEM4_MEMSET4_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PMEM4_MEMSET4_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PMEM4_MEMSET4_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PMEM4_MEMSET4_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PMEM4_MEMSET4_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PMEM4_MEMSET4_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PMEM4_MEMSET4_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PMEM4_MEMSET4_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PMEM4_MEMWAIT4 ((u32)0x0000FF00) /* MEMWAIT4[7:0] bits (Common memory 4 wait time) */ -#define FSMC_PMEM4_MEMWAIT4_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PMEM4_MEMWAIT4_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PMEM4_MEMWAIT4_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PMEM4_MEMWAIT4_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PMEM4_MEMWAIT4_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PMEM4_MEMWAIT4_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PMEM4_MEMWAIT4_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PMEM4_MEMWAIT4_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PMEM4_MEMHOLD4 ((u32)0x00FF0000) /* MEMHOLD4[7:0] bits (Common memory 4 hold time) */ -#define FSMC_PMEM4_MEMHOLD4_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PMEM4_MEMHOLD4_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PMEM4_MEMHOLD4_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PMEM4_MEMHOLD4_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PMEM4_MEMHOLD4_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PMEM4_MEMHOLD4_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PMEM4_MEMHOLD4_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PMEM4_MEMHOLD4_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PMEM4_MEMHIZ4 ((u32)0xFF000000) /* MEMHIZ4[7:0] bits (Common memory 4 databus HiZ time) */ -#define FSMC_PMEM4_MEMHIZ4_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PMEM4_MEMHIZ4_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PMEM4_MEMHIZ4_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PMEM4_MEMHIZ4_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PMEM4_MEMHIZ4_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PMEM4_MEMHIZ4_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PMEM4_MEMHIZ4_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PMEM4_MEMHIZ4_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_PATT2 register ******************/ -#define FSMC_PATT2_ATTSET2 ((u32)0x000000FF) /* ATTSET2[7:0] bits (Attribute memory 2 setup time) */ -#define FSMC_PATT2_ATTSET2_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PATT2_ATTSET2_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PATT2_ATTSET2_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PATT2_ATTSET2_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PATT2_ATTSET2_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PATT2_ATTSET2_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PATT2_ATTSET2_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PATT2_ATTSET2_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PATT2_ATTWAIT2 ((u32)0x0000FF00) /* ATTWAIT2[7:0] bits (Attribute memory 2 wait time) */ -#define FSMC_PATT2_ATTWAIT2_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PATT2_ATTWAIT2_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PATT2_ATTWAIT2_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PATT2_ATTWAIT2_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PATT2_ATTWAIT2_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PATT2_ATTWAIT2_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PATT2_ATTWAIT2_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PATT2_ATTWAIT2_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PATT2_ATTHOLD2 ((u32)0x00FF0000) /* ATTHOLD2[7:0] bits (Attribute memory 2 hold time) */ -#define FSMC_PATT2_ATTHOLD2_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PATT2_ATTHOLD2_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PATT2_ATTHOLD2_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PATT2_ATTHOLD2_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PATT2_ATTHOLD2_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PATT2_ATTHOLD2_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PATT2_ATTHOLD2_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PATT2_ATTHOLD2_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PATT2_ATTHIZ2 ((u32)0xFF000000) /* ATTHIZ2[7:0] bits (Attribute memory 2 databus HiZ time) */ -#define FSMC_PATT2_ATTHIZ2_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PATT2_ATTHIZ2_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PATT2_ATTHIZ2_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PATT2_ATTHIZ2_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PATT2_ATTHIZ2_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PATT2_ATTHIZ2_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PATT2_ATTHIZ2_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PATT2_ATTHIZ2_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_PATT3 register ******************/ -#define FSMC_PATT3_ATTSET3 ((u32)0x000000FF) /* ATTSET3[7:0] bits (Attribute memory 3 setup time) */ -#define FSMC_PATT3_ATTSET3_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PATT3_ATTSET3_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PATT3_ATTSET3_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PATT3_ATTSET3_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PATT3_ATTSET3_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PATT3_ATTSET3_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PATT3_ATTSET3_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PATT3_ATTSET3_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PATT3_ATTWAIT3 ((u32)0x0000FF00) /* ATTWAIT3[7:0] bits (Attribute memory 3 wait time) */ -#define FSMC_PATT3_ATTWAIT3_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PATT3_ATTWAIT3_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PATT3_ATTWAIT3_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PATT3_ATTWAIT3_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PATT3_ATTWAIT3_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PATT3_ATTWAIT3_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PATT3_ATTWAIT3_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PATT3_ATTWAIT3_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PATT3_ATTHOLD3 ((u32)0x00FF0000) /* ATTHOLD3[7:0] bits (Attribute memory 3 hold time) */ -#define FSMC_PATT3_ATTHOLD3_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PATT3_ATTHOLD3_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PATT3_ATTHOLD3_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PATT3_ATTHOLD3_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PATT3_ATTHOLD3_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PATT3_ATTHOLD3_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PATT3_ATTHOLD3_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PATT3_ATTHOLD3_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PATT3_ATTHIZ3 ((u32)0xFF000000) /* ATTHIZ3[7:0] bits (Attribute memory 3 databus HiZ time) */ -#define FSMC_PATT3_ATTHIZ3_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PATT3_ATTHIZ3_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PATT3_ATTHIZ3_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PATT3_ATTHIZ3_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PATT3_ATTHIZ3_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PATT3_ATTHIZ3_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PATT3_ATTHIZ3_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PATT3_ATTHIZ3_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_PATT4 register ******************/ -#define FSMC_PATT4_ATTSET4 ((u32)0x000000FF) /* ATTSET4[7:0] bits (Attribute memory 4 setup time) */ -#define FSMC_PATT4_ATTSET4_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PATT4_ATTSET4_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PATT4_ATTSET4_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PATT4_ATTSET4_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PATT4_ATTSET4_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PATT4_ATTSET4_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PATT4_ATTSET4_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PATT4_ATTSET4_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PATT4_ATTWAIT4 ((u32)0x0000FF00) /* ATTWAIT4[7:0] bits (Attribute memory 4 wait time) */ -#define FSMC_PATT4_ATTWAIT4_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PATT4_ATTWAIT4_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PATT4_ATTWAIT4_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PATT4_ATTWAIT4_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PATT4_ATTWAIT4_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PATT4_ATTWAIT4_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PATT4_ATTWAIT4_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PATT4_ATTWAIT4_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PATT4_ATTHOLD4 ((u32)0x00FF0000) /* ATTHOLD4[7:0] bits (Attribute memory 4 hold time) */ -#define FSMC_PATT4_ATTHOLD4_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PATT4_ATTHOLD4_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PATT4_ATTHOLD4_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PATT4_ATTHOLD4_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PATT4_ATTHOLD4_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PATT4_ATTHOLD4_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PATT4_ATTHOLD4_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PATT4_ATTHOLD4_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PATT4_ATTHIZ4 ((u32)0xFF000000) /* ATTHIZ4[7:0] bits (Attribute memory 4 databus HiZ time) */ -#define FSMC_PATT4_ATTHIZ4_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PATT4_ATTHIZ4_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PATT4_ATTHIZ4_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PATT4_ATTHIZ4_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PATT4_ATTHIZ4_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PATT4_ATTHIZ4_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PATT4_ATTHIZ4_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PATT4_ATTHIZ4_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_PIO4 register *******************/ -#define FSMC_PIO4_IOSET4 ((u32)0x000000FF) /* IOSET4[7:0] bits (I/O 4 setup time) */ -#define FSMC_PIO4_IOSET4_0 ((u32)0x00000001) /* Bit 0 */ -#define FSMC_PIO4_IOSET4_1 ((u32)0x00000002) /* Bit 1 */ -#define FSMC_PIO4_IOSET4_2 ((u32)0x00000004) /* Bit 2 */ -#define FSMC_PIO4_IOSET4_3 ((u32)0x00000008) /* Bit 3 */ -#define FSMC_PIO4_IOSET4_4 ((u32)0x00000010) /* Bit 4 */ -#define FSMC_PIO4_IOSET4_5 ((u32)0x00000020) /* Bit 5 */ -#define FSMC_PIO4_IOSET4_6 ((u32)0x00000040) /* Bit 6 */ -#define FSMC_PIO4_IOSET4_7 ((u32)0x00000080) /* Bit 7 */ - -#define FSMC_PIO4_IOWAIT4 ((u32)0x0000FF00) /* IOWAIT4[7:0] bits (I/O 4 wait time) */ -#define FSMC_PIO4_IOWAIT4_0 ((u32)0x00000100) /* Bit 0 */ -#define FSMC_PIO4_IOWAIT4_1 ((u32)0x00000200) /* Bit 1 */ -#define FSMC_PIO4_IOWAIT4_2 ((u32)0x00000400) /* Bit 2 */ -#define FSMC_PIO4_IOWAIT4_3 ((u32)0x00000800) /* Bit 3 */ -#define FSMC_PIO4_IOWAIT4_4 ((u32)0x00001000) /* Bit 4 */ -#define FSMC_PIO4_IOWAIT4_5 ((u32)0x00002000) /* Bit 5 */ -#define FSMC_PIO4_IOWAIT4_6 ((u32)0x00004000) /* Bit 6 */ -#define FSMC_PIO4_IOWAIT4_7 ((u32)0x00008000) /* Bit 7 */ - -#define FSMC_PIO4_IOHOLD4 ((u32)0x00FF0000) /* IOHOLD4[7:0] bits (I/O 4 hold time) */ -#define FSMC_PIO4_IOHOLD4_0 ((u32)0x00010000) /* Bit 0 */ -#define FSMC_PIO4_IOHOLD4_1 ((u32)0x00020000) /* Bit 1 */ -#define FSMC_PIO4_IOHOLD4_2 ((u32)0x00040000) /* Bit 2 */ -#define FSMC_PIO4_IOHOLD4_3 ((u32)0x00080000) /* Bit 3 */ -#define FSMC_PIO4_IOHOLD4_4 ((u32)0x00100000) /* Bit 4 */ -#define FSMC_PIO4_IOHOLD4_5 ((u32)0x00200000) /* Bit 5 */ -#define FSMC_PIO4_IOHOLD4_6 ((u32)0x00400000) /* Bit 6 */ -#define FSMC_PIO4_IOHOLD4_7 ((u32)0x00800000) /* Bit 7 */ - -#define FSMC_PIO4_IOHIZ4 ((u32)0xFF000000) /* IOHIZ4[7:0] bits (I/O 4 databus HiZ time) */ -#define FSMC_PIO4_IOHIZ4_0 ((u32)0x01000000) /* Bit 0 */ -#define FSMC_PIO4_IOHIZ4_1 ((u32)0x02000000) /* Bit 1 */ -#define FSMC_PIO4_IOHIZ4_2 ((u32)0x04000000) /* Bit 2 */ -#define FSMC_PIO4_IOHIZ4_3 ((u32)0x08000000) /* Bit 3 */ -#define FSMC_PIO4_IOHIZ4_4 ((u32)0x10000000) /* Bit 4 */ -#define FSMC_PIO4_IOHIZ4_5 ((u32)0x20000000) /* Bit 5 */ -#define FSMC_PIO4_IOHIZ4_6 ((u32)0x40000000) /* Bit 6 */ -#define FSMC_PIO4_IOHIZ4_7 ((u32)0x80000000) /* Bit 7 */ - - -/****************** Bit definition for FSMC_ECCR2 register ******************/ -#define FSMC_ECCR2_ECC2 ((u32)0xFFFFFFFF) /* ECC result */ - -/****************** Bit definition for FSMC_ECCR3 register ******************/ -#define FSMC_ECCR3_ECC3 ((u32)0xFFFFFFFF) /* ECC result */ - - - -/******************************************************************************/ -/* */ -/* SD host Interface */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for SDIO_POWER register ******************/ -#define SDIO_POWER_PWRCTRL ((u8)0x03) /* PWRCTRL[1:0] bits (Power supply control bits) */ -#define SDIO_POWER_PWRCTRL_0 ((u8)0x01) /* Bit 0 */ -#define SDIO_POWER_PWRCTRL_1 ((u8)0x02) /* Bit 1 */ - - -/****************** Bit definition for SDIO_CLKCR register ******************/ -#define SDIO_CLKCR_CLKDIV ((u16)0x00FF) /* Clock divide factor */ -#define SDIO_CLKCR_CLKEN ((u16)0x0100) /* Clock enable bit */ -#define SDIO_CLKCR_PWRSAV ((u16)0x0200) /* Power saving configuration bit */ -#define SDIO_CLKCR_BYPASS ((u16)0x0400) /* Clock divider bypass enable bit */ - -#define SDIO_CLKCR_WIDBUS ((u16)0x1800) /* WIDBUS[1:0] bits (Wide bus mode enable bit) */ -#define SDIO_CLKCR_WIDBUS_0 ((u16)0x0800) /* Bit 0 */ -#define SDIO_CLKCR_WIDBUS_1 ((u16)0x1000) /* Bit 1 */ - -#define SDIO_CLKCR_NEGEDGE ((u16)0x2000) /* SDIO_CK dephasing selection bit */ -#define SDIO_CLKCR_HWFC_EN ((u16)0x4000) /* HW Flow Control enable */ - - -/******************* Bit definition for SDIO_ARG register *******************/ -#define SDIO_ARG_CMDARG ((u32)0xFFFFFFFF) /* Command argument */ - - -/******************* Bit definition for SDIO_CMD register *******************/ -#define SDIO_CMD_CMDINDEX ((u16)0x003F) /* Command Index */ - -#define SDIO_CMD_WAITRESP ((u16)0x00C0) /* WAITRESP[1:0] bits (Wait for response bits) */ -#define SDIO_CMD_WAITRESP_0 ((u16)0x0040) /* Bit 0 */ -#define SDIO_CMD_WAITRESP_1 ((u16)0x0080) /* Bit 1 */ - -#define SDIO_CMD_WAITINT ((u16)0x0100) /* CPSM Waits for Interrupt Request */ -#define SDIO_CMD_WAITPEND ((u16)0x0200) /* CPSM Waits for ends of data transfer (CmdPend internal signal) */ -#define SDIO_CMD_CPSMEN ((u16)0x0400) /* Command path state machine (CPSM) Enable bit */ -#define SDIO_CMD_SDIOSUSPEND ((u16)0x0800) /* SD I/O suspend command */ -#define SDIO_CMD_ENCMDCOMPL ((u16)0x1000) /* Enable CMD completion */ -#define SDIO_CMD_NIEN ((u16)0x2000) /* Not Interrupt Enable */ -#define SDIO_CMD_CEATACMD ((u16)0x4000) /* CE-ATA command */ - - -/***************** Bit definition for SDIO_RESPCMD register *****************/ -#define SDIO_RESPCMD_RESPCMD ((u8)0x3F) /* Response command index */ - - -/****************** Bit definition for SDIO_RESP0 register ******************/ -#define SDIO_RESP0_CARDSTATUS0 ((u32)0xFFFFFFFF) /* Card Status */ - - -/****************** Bit definition for SDIO_RESP1 register ******************/ -#define SDIO_RESP1_CARDSTATUS1 ((u32)0xFFFFFFFF) /* Card Status */ - - -/****************** Bit definition for SDIO_RESP2 register ******************/ -#define SDIO_RESP2_CARDSTATUS2 ((u32)0xFFFFFFFF) /* Card Status */ - - -/****************** Bit definition for SDIO_RESP3 register ******************/ -#define SDIO_RESP3_CARDSTATUS3 ((u32)0xFFFFFFFF) /* Card Status */ - - -/****************** Bit definition for SDIO_RESP4 register ******************/ -#define SDIO_RESP4_CARDSTATUS4 ((u32)0xFFFFFFFF) /* Card Status */ - - -/****************** Bit definition for SDIO_DTIMER register *****************/ -#define SDIO_DTIMER_DATATIME ((u32)0xFFFFFFFF) /* Data timeout period. */ - - -/****************** Bit definition for SDIO_DLEN register *******************/ -#define SDIO_DLEN_DATALENGTH ((u32)0x01FFFFFF) /* Data length value */ - - -/****************** Bit definition for SDIO_DCTRL register ******************/ -#define SDIO_DCTRL_DTEN ((u16)0x0001) /* Data transfer enabled bit */ -#define SDIO_DCTRL_DTDIR ((u16)0x0002) /* Data transfer direction selection */ -#define SDIO_DCTRL_DTMODE ((u16)0x0004) /* Data transfer mode selection */ -#define SDIO_DCTRL_DMAEN ((u16)0x0008) /* DMA enabled bit */ - -#define SDIO_DCTRL_DBLOCKSIZE ((u16)0x00F0) /* DBLOCKSIZE[3:0] bits (Data block size) */ -#define SDIO_DCTRL_DBLOCKSIZE_0 ((u16)0x0010) /* Bit 0 */ -#define SDIO_DCTRL_DBLOCKSIZE_1 ((u16)0x0020) /* Bit 1 */ -#define SDIO_DCTRL_DBLOCKSIZE_2 ((u16)0x0040) /* Bit 2 */ -#define SDIO_DCTRL_DBLOCKSIZE_3 ((u16)0x0080) /* Bit 3 */ - -#define SDIO_DCTRL_RWSTART ((u16)0x0100) /* Read wait start */ -#define SDIO_DCTRL_RWSTOP ((u16)0x0200) /* Read wait stop */ -#define SDIO_DCTRL_RWMOD ((u16)0x0400) /* Read wait mode */ -#define SDIO_DCTRL_SDIOEN ((u16)0x0800) /* SD I/O enable functions */ - - -/****************** Bit definition for SDIO_DCOUNT register *****************/ -#define SDIO_DCOUNT_DATACOUNT ((u32)0x01FFFFFF) /* Data count value */ - - -/****************** Bit definition for SDIO_STA register ********************/ -#define SDIO_STA_CCRCFAIL ((u32)0x00000001) /* Command response received (CRC check failed) */ -#define SDIO_STA_DCRCFAIL ((u32)0x00000002) /* Data block sent/received (CRC check failed) */ -#define SDIO_STA_CTIMEOUT ((u32)0x00000004) /* Command response timeout */ -#define SDIO_STA_DTIMEOUT ((u32)0x00000008) /* Data timeout */ -#define SDIO_STA_TXUNDERR ((u32)0x00000010) /* Transmit FIFO underrun error */ -#define SDIO_STA_RXOVERR ((u32)0x00000020) /* Received FIFO overrun error */ -#define SDIO_STA_CMDREND ((u32)0x00000040) /* Command response received (CRC check passed) */ -#define SDIO_STA_CMDSENT ((u32)0x00000080) /* Command sent (no response required) */ -#define SDIO_STA_DATAEND ((u32)0x00000100) /* Data end (data counter, SDIDCOUNT, is zero) */ -#define SDIO_STA_STBITERR ((u32)0x00000200) /* Start bit not detected on all data signals in wide bus mode */ -#define SDIO_STA_DBCKEND ((u32)0x00000400) /* Data block sent/received (CRC check passed) */ -#define SDIO_STA_CMDACT ((u32)0x00000800) /* Command transfer in progress */ -#define SDIO_STA_TXACT ((u32)0x00001000) /* Data transmit in progress */ -#define SDIO_STA_RXACT ((u32)0x00002000) /* Data receive in progress */ -#define SDIO_STA_TXFIFOHE ((u32)0x00004000) /* Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */ -#define SDIO_STA_RXFIFOHF ((u32)0x00008000) /* Receive FIFO Half Full: there are at least 8 words in the FIFO */ -#define SDIO_STA_TXFIFOF ((u32)0x00010000) /* Transmit FIFO full */ -#define SDIO_STA_RXFIFOF ((u32)0x00020000) /* Receive FIFO full */ -#define SDIO_STA_TXFIFOE ((u32)0x00040000) /* Transmit FIFO empty */ -#define SDIO_STA_RXFIFOE ((u32)0x00080000) /* Receive FIFO empty */ -#define SDIO_STA_TXDAVL ((u32)0x00100000) /* Data available in transmit FIFO */ -#define SDIO_STA_RXDAVL ((u32)0x00200000) /* Data available in receive FIFO */ -#define SDIO_STA_SDIOIT ((u32)0x00400000) /* SDIO interrupt received */ -#define SDIO_STA_CEATAEND ((u32)0x00800000) /* CE-ATA command completion signal received for CMD61 */ - - -/******************* Bit definition for SDIO_ICR register *******************/ -#define SDIO_ICR_CCRCFAILC ((u32)0x00000001) /* CCRCFAIL flag clear bit */ -#define SDIO_ICR_DCRCFAILC ((u32)0x00000002) /* DCRCFAIL flag clear bit */ -#define SDIO_ICR_CTIMEOUTC ((u32)0x00000004) /* CTIMEOUT flag clear bit */ -#define SDIO_ICR_DTIMEOUTC ((u32)0x00000008) /* DTIMEOUT flag clear bit */ -#define SDIO_ICR_TXUNDERRC ((u32)0x00000010) /* TXUNDERR flag clear bit */ -#define SDIO_ICR_RXOVERRC ((u32)0x00000020) /* RXOVERR flag clear bit */ -#define SDIO_ICR_CMDRENDC ((u32)0x00000040) /* CMDREND flag clear bit */ -#define SDIO_ICR_CMDSENTC ((u32)0x00000080) /* CMDSENT flag clear bit */ -#define SDIO_ICR_DATAENDC ((u32)0x00000100) /* DATAEND flag clear bit */ -#define SDIO_ICR_STBITERRC ((u32)0x00000200) /* STBITERR flag clear bit */ -#define SDIO_ICR_DBCKENDC ((u32)0x00000400) /* DBCKEND flag clear bit */ -#define SDIO_ICR_SDIOITC ((u32)0x00400000) /* SDIOIT flag clear bit */ -#define SDIO_ICR_CEATAENDC ((u32)0x00800000) /* CEATAEND flag clear bit */ - - -/****************** Bit definition for SDIO_MASK register *******************/ -#define SDIO_MASK_CCRCFAILIE ((u32)0x00000001) /* Command CRC Fail Interrupt Enable */ -#define SDIO_MASK_DCRCFAILIE ((u32)0x00000002) /* Data CRC Fail Interrupt Enable */ -#define SDIO_MASK_CTIMEOUTIE ((u32)0x00000004) /* Command TimeOut Interrupt Enable */ -#define SDIO_MASK_DTIMEOUTIE ((u32)0x00000008) /* Data TimeOut Interrupt Enable */ -#define SDIO_MASK_TXUNDERRIE ((u32)0x00000010) /* Tx FIFO UnderRun Error Interrupt Enable */ -#define SDIO_MASK_RXOVERRIE ((u32)0x00000020) /* Rx FIFO OverRun Error Interrupt Enable */ -#define SDIO_MASK_CMDRENDIE ((u32)0x00000040) /* Command Response Received Interrupt Enable */ -#define SDIO_MASK_CMDSENTIE ((u32)0x00000080) /* Command Sent Interrupt Enable */ -#define SDIO_MASK_DATAENDIE ((u32)0x00000100) /* Data End Interrupt Enable */ -#define SDIO_MASK_STBITERRIE ((u32)0x00000200) /* Start Bit Error Interrupt Enable */ -#define SDIO_MASK_DBCKENDIE ((u32)0x00000400) /* Data Block End Interrupt Enable */ -#define SDIO_MASK_CMDACTIE ((u32)0x00000800) /* CCommand Acting Interrupt Enable */ -#define SDIO_MASK_TXACTIE ((u32)0x00001000) /* Data Transmit Acting Interrupt Enable */ -#define SDIO_MASK_RXACTIE ((u32)0x00002000) /* Data receive acting interrupt enabled */ -#define SDIO_MASK_TXFIFOHEIE ((u32)0x00004000) /* Tx FIFO Half Empty interrupt Enable */ -#define SDIO_MASK_RXFIFOHFIE ((u32)0x00008000) /* Rx FIFO Half Full interrupt Enable */ -#define SDIO_MASK_TXFIFOFIE ((u32)0x00010000) /* Tx FIFO Full interrupt Enable */ -#define SDIO_MASK_RXFIFOFIE ((u32)0x00020000) /* Rx FIFO Full interrupt Enable */ -#define SDIO_MASK_TXFIFOEIE ((u32)0x00040000) /* Tx FIFO Empty interrupt Enable */ -#define SDIO_MASK_RXFIFOEIE ((u32)0x00080000) /* Rx FIFO Empty interrupt Enable */ -#define SDIO_MASK_TXDAVLIE ((u32)0x00100000) /* Data available in Tx FIFO interrupt Enable */ -#define SDIO_MASK_RXDAVLIE ((u32)0x00200000) /* Data available in Rx FIFO interrupt Enable */ -#define SDIO_MASK_SDIOITIE ((u32)0x00400000) /* SDIO Mode Interrupt Received interrupt Enable */ -#define SDIO_MASK_CEATAENDIE ((u32)0x00800000) /* CE-ATA command completion signal received Interrupt Enable */ - - -/***************** Bit definition for SDIO_FIFOCNT register *****************/ -#define SDIO_FIFOCNT_FIFOCOUNT ((u32)0x00FFFFFF) /* Remaining number of words to be written to or read from the FIFO */ - - -/****************** Bit definition for SDIO_FIFO register *******************/ -#define SDIO_FIFO_FIFODATA ((u32)0xFFFFFFFF) /* Receive and transmit FIFO data */ - - - -/******************************************************************************/ -/* */ -/* USB */ -/* */ -/******************************************************************************/ - -/* Endpoint-specific registers */ -/******************* Bit definition for USB_EP0R register *******************/ -#define USB_EP0R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP0R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP0R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP0R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP0R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP0R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP0R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP0R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP0R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP0R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP0R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP0R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP0R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP0R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP0R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP0R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP1R register *******************/ -#define USB_EP1R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP1R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP1R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP1R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP1R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP1R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP1R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP1R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP1R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP1R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP1R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP1R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP1R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP1R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP1R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP1R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP2R register *******************/ -#define USB_EP2R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP2R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP2R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP2R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP2R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP2R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP2R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP2R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP2R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP2R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP2R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP2R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP2R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP2R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP2R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP2R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP3R register *******************/ -#define USB_EP3R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP3R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP3R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP3R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP3R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP3R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP3R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP3R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP3R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP3R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP3R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP3R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP3R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP3R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP3R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP3R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP4R register *******************/ -#define USB_EP4R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP4R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP4R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP4R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP4R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP4R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP4R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP4R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP4R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP4R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP4R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP4R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP4R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP4R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP4R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP4R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP5R register *******************/ -#define USB_EP5R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP5R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP5R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP5R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP5R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP5R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP5R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP5R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP5R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP5R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP5R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP5R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP5R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP5R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP5R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP5R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP6R register *******************/ -#define USB_EP6R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP6R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP6R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP6R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP6R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP6R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP6R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP6R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP6R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP6R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP6R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP6R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP6R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP6R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP6R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP6R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/******************* Bit definition for USB_EP7R register *******************/ -#define USB_EP7R_EA ((u16)0x000F) /* Endpoint Address */ - -#define USB_EP7R_STAT_TX ((u16)0x0030) /* STAT_TX[1:0] bits (Status bits, for transmission transfers) */ -#define USB_EP7R_STAT_TX_0 ((u16)0x0010) /* Bit 0 */ -#define USB_EP7R_STAT_TX_1 ((u16)0x0020) /* Bit 1 */ - -#define USB_EP7R_DTOG_TX ((u16)0x0040) /* Data Toggle, for transmission transfers */ -#define USB_EP7R_CTR_TX ((u16)0x0080) /* Correct Transfer for transmission */ -#define USB_EP7R_EP_KIND ((u16)0x0100) /* Endpoint Kind */ - -#define USB_EP7R_EP_TYPE ((u16)0x0600) /* EP_TYPE[1:0] bits (Endpoint type) */ -#define USB_EP7R_EP_TYPE_0 ((u16)0x0200) /* Bit 0 */ -#define USB_EP7R_EP_TYPE_1 ((u16)0x0400) /* Bit 1 */ - -#define USB_EP7R_SETUP ((u16)0x0800) /* Setup transaction completed */ - -#define USB_EP7R_STAT_RX ((u16)0x3000) /* STAT_RX[1:0] bits (Status bits, for reception transfers) */ -#define USB_EP7R_STAT_RX_0 ((u16)0x1000) /* Bit 0 */ -#define USB_EP7R_STAT_RX_1 ((u16)0x2000) /* Bit 1 */ - -#define USB_EP7R_DTOG_RX ((u16)0x4000) /* Data Toggle, for reception transfers */ -#define USB_EP7R_CTR_RX ((u16)0x8000) /* Correct Transfer for reception */ - - -/* Common registers */ -/******************* Bit definition for USB_CNTR register *******************/ -#define USB_CNTR_FRES ((u16)0x0001) /* Force USB Reset */ -#define USB_CNTR_PDWN ((u16)0x0002) /* Power down */ -#define USB_CNTR_LP_MODE ((u16)0x0004) /* Low-power mode */ -#define USB_CNTR_FSUSP ((u16)0x0008) /* Force suspend */ -#define USB_CNTR_RESUME ((u16)0x0010) /* Resume request */ -#define USB_CNTR_ESOFM ((u16)0x0100) /* Expected Start Of Frame Interrupt Mask */ -#define USB_CNTR_SOFM ((u16)0x0200) /* Start Of Frame Interrupt Mask */ -#define USB_CNTR_RESETM ((u16)0x0400) /* RESET Interrupt Mask */ -#define USB_CNTR_SUSPM ((u16)0x0800) /* Suspend mode Interrupt Mask */ -#define USB_CNTR_WKUPM ((u16)0x1000) /* Wakeup Interrupt Mask */ -#define USB_CNTR_ERRM ((u16)0x2000) /* Error Interrupt Mask */ -#define USB_CNTR_PMAOVRM ((u16)0x4000) /* Packet Memory Area Over / Underrun Interrupt Mask */ -#define USB_CNTR_CTRM ((u16)0x8000) /* Correct Transfer Interrupt Mask */ - - -/******************* Bit definition for USB_ISTR register *******************/ -#define USB_ISTR_EP_ID ((u16)0x000F) /* Endpoint Identifier */ -#define USB_ISTR_DIR ((u16)0x0010) /* Direction of transaction */ -#define USB_ISTR_ESOF ((u16)0x0100) /* Expected Start Of Frame */ -#define USB_ISTR_SOF ((u16)0x0200) /* Start Of Frame */ -#define USB_ISTR_RESET ((u16)0x0400) /* USB RESET request */ -#define USB_ISTR_SUSP ((u16)0x0800) /* Suspend mode request */ -#define USB_ISTR_WKUP ((u16)0x1000) /* Wake up */ -#define USB_ISTR_ERR ((u16)0x2000) /* Error */ -#define USB_ISTR_PMAOVR ((u16)0x4000) /* Packet Memory Area Over / Underrun */ -#define USB_ISTR_CTR ((u16)0x8000) /* Correct Transfer */ - - -/******************* Bit definition for USB_FNR register ********************/ -#define USB_FNR_FN ((u16)0x07FF) /* Frame Number */ -#define USB_FNR_LSOF ((u16)0x1800) /* Lost SOF */ -#define USB_FNR_LCK ((u16)0x2000) /* Locked */ -#define USB_FNR_RXDM ((u16)0x4000) /* Receive Data - Line Status */ -#define USB_FNR_RXDP ((u16)0x8000) /* Receive Data + Line Status */ - - -/****************** Bit definition for USB_DADDR register *******************/ -#define USB_DADDR_ADD ((u8)0x7F) /* ADD[6:0] bits (Device Address) */ -#define USB_DADDR_ADD0 ((u8)0x01) /* Bit 0 */ -#define USB_DADDR_ADD1 ((u8)0x02) /* Bit 1 */ -#define USB_DADDR_ADD2 ((u8)0x04) /* Bit 2 */ -#define USB_DADDR_ADD3 ((u8)0x08) /* Bit 3 */ -#define USB_DADDR_ADD4 ((u8)0x10) /* Bit 4 */ -#define USB_DADDR_ADD5 ((u8)0x20) /* Bit 5 */ -#define USB_DADDR_ADD6 ((u8)0x40) /* Bit 6 */ - -#define USB_DADDR_EF ((u8)0x80) /* Enable Function */ - - -/****************** Bit definition for USB_BTABLE register ******************/ -#define USB_BTABLE_BTABLE ((u16)0xFFF8) /* Buffer Table */ - - -/* Buffer descriptor table */ -/***************** Bit definition for USB_ADDR0_TX register *****************/ -#define USB_ADDR0_TX_ADDR0_TX ((u16)0xFFFE) /* Transmission Buffer Address 0 */ - - -/***************** Bit definition for USB_ADDR1_TX register *****************/ -#define USB_ADDR1_TX_ADDR1_TX ((u16)0xFFFE) /* Transmission Buffer Address 1 */ - - -/***************** Bit definition for USB_ADDR2_TX register *****************/ -#define USB_ADDR2_TX_ADDR2_TX ((u16)0xFFFE) /* Transmission Buffer Address 2 */ - - -/***************** Bit definition for USB_ADDR3_TX register *****************/ -#define USB_ADDR3_TX_ADDR3_TX ((u16)0xFFFE) /* Transmission Buffer Address 3 */ - - -/***************** Bit definition for USB_ADDR4_TX register *****************/ -#define USB_ADDR4_TX_ADDR4_TX ((u16)0xFFFE) /* Transmission Buffer Address 4 */ - - -/***************** Bit definition for USB_ADDR5_TX register *****************/ -#define USB_ADDR5_TX_ADDR5_TX ((u16)0xFFFE) /* Transmission Buffer Address 5 */ - - -/***************** Bit definition for USB_ADDR6_TX register *****************/ -#define USB_ADDR6_TX_ADDR6_TX ((u16)0xFFFE) /* Transmission Buffer Address 6 */ - - -/***************** Bit definition for USB_ADDR7_TX register *****************/ -#define USB_ADDR7_TX_ADDR7_TX ((u16)0xFFFE) /* Transmission Buffer Address 7 */ - - -/*----------------------------------------------------------------------------*/ - - -/***************** Bit definition for USB_COUNT0_TX register ****************/ -#define USB_COUNT0_TX_COUNT0_TX ((u16)0x03FF) /* Transmission Byte Count 0 */ - - -/***************** Bit definition for USB_COUNT1_TX register ****************/ -#define USB_COUNT1_TX_COUNT1_TX ((u16)0x03FF) /* Transmission Byte Count 1 */ - - -/***************** Bit definition for USB_COUNT2_TX register ****************/ -#define USB_COUNT2_TX_COUNT2_TX ((u16)0x03FF) /* Transmission Byte Count 2 */ - - -/***************** Bit definition for USB_COUNT3_TX register ****************/ -#define USB_COUNT3_TX_COUNT3_TX ((u16)0x03FF) /* Transmission Byte Count 3 */ - - -/***************** Bit definition for USB_COUNT4_TX register ****************/ -#define USB_COUNT4_TX_COUNT4_TX ((u16)0x03FF) /* Transmission Byte Count 4 */ - -/***************** Bit definition for USB_COUNT5_TX register ****************/ -#define USB_COUNT5_TX_COUNT5_TX ((u16)0x03FF) /* Transmission Byte Count 5 */ - - -/***************** Bit definition for USB_COUNT6_TX register ****************/ -#define USB_COUNT6_TX_COUNT6_TX ((u16)0x03FF) /* Transmission Byte Count 6 */ - - -/***************** Bit definition for USB_COUNT7_TX register ****************/ -#define USB_COUNT7_TX_COUNT7_TX ((u16)0x03FF) /* Transmission Byte Count 7 */ - - -/*----------------------------------------------------------------------------*/ - - -/**************** Bit definition for USB_COUNT0_TX_0 register ***************/ -#define USB_COUNT0_TX_0_COUNT0_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 0 (low) */ - -/**************** Bit definition for USB_COUNT0_TX_1 register ***************/ -#define USB_COUNT0_TX_1_COUNT0_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 0 (high) */ - - - -/**************** Bit definition for USB_COUNT1_TX_0 register ***************/ -#define USB_COUNT1_TX_0_COUNT1_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 1 (low) */ - -/**************** Bit definition for USB_COUNT1_TX_1 register ***************/ -#define USB_COUNT1_TX_1_COUNT1_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 1 (high) */ - - - -/**************** Bit definition for USB_COUNT2_TX_0 register ***************/ -#define USB_COUNT2_TX_0_COUNT2_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 2 (low) */ - -/**************** Bit definition for USB_COUNT2_TX_1 register ***************/ -#define USB_COUNT2_TX_1_COUNT2_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 2 (high) */ - - - -/**************** Bit definition for USB_COUNT3_TX_0 register ***************/ -#define USB_COUNT3_TX_0_COUNT3_TX_0 ((u16)0x000003FF) /* Transmission Byte Count 3 (low) */ - -/**************** Bit definition for USB_COUNT3_TX_1 register ***************/ -#define USB_COUNT3_TX_1_COUNT3_TX_1 ((u16)0x03FF0000) /* Transmission Byte Count 3 (high) */ - - - -/**************** Bit definition for USB_COUNT4_TX_0 register ***************/ -#define USB_COUNT4_TX_0_COUNT4_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 4 (low) */ - -/**************** Bit definition for USB_COUNT4_TX_1 register ***************/ -#define USB_COUNT4_TX_1_COUNT4_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 4 (high) */ - - - -/**************** Bit definition for USB_COUNT5_TX_0 register ***************/ -#define USB_COUNT5_TX_0_COUNT5_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 5 (low) */ - -/**************** Bit definition for USB_COUNT5_TX_1 register ***************/ -#define USB_COUNT5_TX_1_COUNT5_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 5 (high) */ - - - -/**************** Bit definition for USB_COUNT6_TX_0 register ***************/ -#define USB_COUNT6_TX_0_COUNT6_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 6 (low) */ - -/**************** Bit definition for USB_COUNT6_TX_1 register ***************/ -#define USB_COUNT6_TX_1_COUNT6_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 6 (high) */ - - - -/**************** Bit definition for USB_COUNT7_TX_0 register ***************/ -#define USB_COUNT7_TX_0_COUNT7_TX_0 ((u32)0x000003FF) /* Transmission Byte Count 7 (low) */ - -/**************** Bit definition for USB_COUNT7_TX_1 register ***************/ -#define USB_COUNT7_TX_1_COUNT7_TX_1 ((u32)0x03FF0000) /* Transmission Byte Count 7 (high) */ - - -/*----------------------------------------------------------------------------*/ - - -/***************** Bit definition for USB_ADDR0_RX register *****************/ -#define USB_ADDR0_RX_ADDR0_RX ((u16)0xFFFE) /* Reception Buffer Address 0 */ - - -/***************** Bit definition for USB_ADDR1_RX register *****************/ -#define USB_ADDR1_RX_ADDR1_RX ((u16)0xFFFE) /* Reception Buffer Address 1 */ - - -/***************** Bit definition for USB_ADDR2_RX register *****************/ -#define USB_ADDR2_RX_ADDR2_RX ((u16)0xFFFE) /* Reception Buffer Address 2 */ - - -/***************** Bit definition for USB_ADDR3_RX register *****************/ -#define USB_ADDR3_RX_ADDR3_RX ((u16)0xFFFE) /* Reception Buffer Address 3 */ - - -/***************** Bit definition for USB_ADDR4_RX register *****************/ -#define USB_ADDR4_RX_ADDR4_RX ((u16)0xFFFE) /* Reception Buffer Address 4 */ - - -/***************** Bit definition for USB_ADDR5_RX register *****************/ -#define USB_ADDR5_RX_ADDR5_RX ((u16)0xFFFE) /* Reception Buffer Address 5 */ - - -/***************** Bit definition for USB_ADDR6_RX register *****************/ -#define USB_ADDR6_RX_ADDR6_RX ((u16)0xFFFE) /* Reception Buffer Address 6 */ - - -/***************** Bit definition for USB_ADDR7_RX register *****************/ -#define USB_ADDR7_RX_ADDR7_RX ((u16)0xFFFE) /* Reception Buffer Address 7 */ - - -/*----------------------------------------------------------------------------*/ - - -/***************** Bit definition for USB_COUNT0_RX register ****************/ -#define USB_COUNT0_RX_COUNT0_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT0_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT0_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT0_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT0_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT0_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT0_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT0_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/***************** Bit definition for USB_COUNT1_RX register ****************/ -#define USB_COUNT1_RX_COUNT1_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT1_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT1_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT1_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT1_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT1_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT1_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT1_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/***************** Bit definition for USB_COUNT2_RX register ****************/ -#define USB_COUNT2_RX_COUNT2_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT2_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT2_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT2_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT2_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT2_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT2_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT2_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/***************** Bit definition for USB_COUNT3_RX register ****************/ -#define USB_COUNT3_RX_COUNT3_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT3_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT3_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT3_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT3_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT3_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT3_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT3_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/***************** Bit definition for USB_COUNT4_RX register ****************/ -#define USB_COUNT4_RX_COUNT4_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT4_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT4_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT4_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT4_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT4_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT4_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT4_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/***************** Bit definition for USB_COUNT5_RX register ****************/ -#define USB_COUNT5_RX_COUNT5_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT5_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT5_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT5_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT5_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT5_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT5_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT5_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - -/***************** Bit definition for USB_COUNT6_RX register ****************/ -#define USB_COUNT6_RX_COUNT6_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT6_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT6_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT6_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT6_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT6_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT6_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT6_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/***************** Bit definition for USB_COUNT7_RX register ****************/ -#define USB_COUNT7_RX_COUNT7_RX ((u16)0x03FF) /* Reception Byte Count */ - -#define USB_COUNT7_RX_NUM_BLOCK ((u16)0x7C00) /* NUM_BLOCK[4:0] bits (Number of blocks) */ -#define USB_COUNT7_RX_NUM_BLOCK_0 ((u16)0x0400) /* Bit 0 */ -#define USB_COUNT7_RX_NUM_BLOCK_1 ((u16)0x0800) /* Bit 1 */ -#define USB_COUNT7_RX_NUM_BLOCK_2 ((u16)0x1000) /* Bit 2 */ -#define USB_COUNT7_RX_NUM_BLOCK_3 ((u16)0x2000) /* Bit 3 */ -#define USB_COUNT7_RX_NUM_BLOCK_4 ((u16)0x4000) /* Bit 4 */ - -#define USB_COUNT7_RX_BLSIZE ((u16)0x8000) /* BLock SIZE */ - - -/*----------------------------------------------------------------------------*/ - - -/**************** Bit definition for USB_COUNT0_RX_0 register ***************/ -#define USB_COUNT0_RX_0_COUNT0_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT0_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT0_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT0_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT0_RX_1 register ***************/ -#define USB_COUNT0_RX_1_COUNT0_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT0_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 1 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT0_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT0_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/**************** Bit definition for USB_COUNT1_RX_0 register ***************/ -#define USB_COUNT1_RX_0_COUNT1_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT1_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT1_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT1_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT1_RX_1 register ***************/ -#define USB_COUNT1_RX_1_COUNT1_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT1_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT1_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT1_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/**************** Bit definition for USB_COUNT2_RX_0 register ***************/ -#define USB_COUNT2_RX_0_COUNT2_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT2_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT2_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT2_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT2_RX_1 register ***************/ -#define USB_COUNT2_RX_1_COUNT2_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT2_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT2_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT2_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/**************** Bit definition for USB_COUNT3_RX_0 register ***************/ -#define USB_COUNT3_RX_0_COUNT3_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT3_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT3_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT3_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT3_RX_1 register ***************/ -#define USB_COUNT3_RX_1_COUNT3_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT3_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT3_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT3_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/**************** Bit definition for USB_COUNT4_RX_0 register ***************/ -#define USB_COUNT4_RX_0_COUNT4_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT4_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT4_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT4_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT4_RX_1 register ***************/ -#define USB_COUNT4_RX_1_COUNT4_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT4_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT4_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT4_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/**************** Bit definition for USB_COUNT5_RX_0 register ***************/ -#define USB_COUNT5_RX_0_COUNT5_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT5_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT5_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT5_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT5_RX_1 register ***************/ -#define USB_COUNT5_RX_1_COUNT5_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT5_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT5_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT5_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/*************** Bit definition for USB_COUNT6_RX_0 register ***************/ -#define USB_COUNT6_RX_0_COUNT6_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT6_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT6_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT6_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/**************** Bit definition for USB_COUNT6_RX_1 register ***************/ -#define USB_COUNT6_RX_1_COUNT6_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT6_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT6_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT6_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/*************** Bit definition for USB_COUNT7_RX_0 register ****************/ -#define USB_COUNT7_RX_0_COUNT7_RX_0 ((u32)0x000003FF) /* Reception Byte Count (low) */ - -#define USB_COUNT7_RX_0_NUM_BLOCK_0 ((u32)0x00007C00) /* NUM_BLOCK_0[4:0] bits (Number of blocks) (low) */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_0 ((u32)0x00000400) /* Bit 0 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_1 ((u32)0x00000800) /* Bit 1 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_2 ((u32)0x00001000) /* Bit 2 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_3 ((u32)0x00002000) /* Bit 3 */ -#define USB_COUNT7_RX_0_NUM_BLOCK_0_4 ((u32)0x00004000) /* Bit 4 */ - -#define USB_COUNT7_RX_0_BLSIZE_0 ((u32)0x00008000) /* BLock SIZE (low) */ - -/*************** Bit definition for USB_COUNT7_RX_1 register ****************/ -#define USB_COUNT7_RX_1_COUNT7_RX_1 ((u32)0x03FF0000) /* Reception Byte Count (high) */ - -#define USB_COUNT7_RX_1_NUM_BLOCK_1 ((u32)0x7C000000) /* NUM_BLOCK_1[4:0] bits (Number of blocks) (high) */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_0 ((u32)0x04000000) /* Bit 0 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_1 ((u32)0x08000000) /* Bit 1 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_2 ((u32)0x10000000) /* Bit 2 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_3 ((u32)0x20000000) /* Bit 3 */ -#define USB_COUNT7_RX_1_NUM_BLOCK_1_4 ((u32)0x40000000) /* Bit 4 */ - -#define USB_COUNT7_RX_1_BLSIZE_1 ((u32)0x80000000) /* BLock SIZE (high) */ - - - -/******************************************************************************/ -/* */ -/* Controller Area Network */ -/* */ -/******************************************************************************/ - -/* CAN control and status registers */ -/******************* Bit definition for CAN_MCR register ********************/ -#define CAN_MCR_INRQ ((u16)0x0001) /* Initialization Request */ -#define CAN_MCR_SLEEP ((u16)0x0002) /* Sleep Mode Request */ -#define CAN_MCR_TXFP ((u16)0x0004) /* Transmit FIFO Priority */ -#define CAN_MCR_RFLM ((u16)0x0008) /* Receive FIFO Locked Mode */ -#define CAN_MCR_NART ((u16)0x0010) /* No Automatic Retransmission */ -#define CAN_MCR_AWUM ((u16)0x0020) /* Automatic Wakeup Mode */ -#define CAN_MCR_ABOM ((u16)0x0040) /* Automatic Bus-Off Management */ -#define CAN_MCR_TTCM ((u16)0x0080) /* Time Triggered Communication Mode */ -#define CAN_MCR_RESET ((u16)0x8000) /* bxCAN software master reset */ - - -/******************* Bit definition for CAN_MSR register ********************/ -#define CAN_MSR_INAK ((u16)0x0001) /* Initialization Acknowledge */ -#define CAN_MSR_SLAK ((u16)0x0002) /* Sleep Acknowledge */ -#define CAN_MSR_ERRI ((u16)0x0004) /* Error Interrupt */ -#define CAN_MSR_WKUI ((u16)0x0008) /* Wakeup Interrupt */ -#define CAN_MSR_SLAKI ((u16)0x0010) /* Sleep Acknowledge Interrupt */ -#define CAN_MSR_TXM ((u16)0x0100) /* Transmit Mode */ -#define CAN_MSR_RXM ((u16)0x0200) /* Receive Mode */ -#define CAN_MSR_SAMP ((u16)0x0400) /* Last Sample Point */ -#define CAN_MSR_RX ((u16)0x0800) /* CAN Rx Signal */ - - -/******************* Bit definition for CAN_TSR register ********************/ -#define CAN_TSR_RQCP0 ((u32)0x00000001) /* Request Completed Mailbox0 */ -#define CAN_TSR_TXOK0 ((u32)0x00000002) /* Transmission OK of Mailbox0 */ -#define CAN_TSR_ALST0 ((u32)0x00000004) /* Arbitration Lost for Mailbox0 */ -#define CAN_TSR_TERR0 ((u32)0x00000008) /* Transmission Error of Mailbox0 */ -#define CAN_TSR_ABRQ0 ((u32)0x00000080) /* Abort Request for Mailbox0 */ -#define CAN_TSR_RQCP1 ((u32)0x00000100) /* Request Completed Mailbox1 */ -#define CAN_TSR_TXOK1 ((u32)0x00000200) /* Transmission OK of Mailbox1 */ -#define CAN_TSR_ALST1 ((u32)0x00000400) /* Arbitration Lost for Mailbox1 */ -#define CAN_TSR_TERR1 ((u32)0x00000800) /* Transmission Error of Mailbox1 */ -#define CAN_TSR_ABRQ1 ((u32)0x00008000) /* Abort Request for Mailbox 1 */ -#define CAN_TSR_RQCP2 ((u32)0x00010000) /* Request Completed Mailbox2 */ -#define CAN_TSR_TXOK2 ((u32)0x00020000) /* Transmission OK of Mailbox 2 */ -#define CAN_TSR_ALST2 ((u32)0x00040000) /* Arbitration Lost for mailbox 2 */ -#define CAN_TSR_TERR2 ((u32)0x00080000) /* Transmission Error of Mailbox 2 */ -#define CAN_TSR_ABRQ2 ((u32)0x00800000) /* Abort Request for Mailbox 2 */ -#define CAN_TSR_CODE ((u32)0x03000000) /* Mailbox Code */ - -#define CAN_TSR_TME ((u32)0x1C000000) /* TME[2:0] bits */ -#define CAN_TSR_TME0 ((u32)0x04000000) /* Transmit Mailbox 0 Empty */ -#define CAN_TSR_TME1 ((u32)0x08000000) /* Transmit Mailbox 1 Empty */ -#define CAN_TSR_TME2 ((u32)0x10000000) /* Transmit Mailbox 2 Empty */ - -#define CAN_TSR_LOW ((u32)0xE0000000) /* LOW[2:0] bits */ -#define CAN_TSR_LOW0 ((u32)0x20000000) /* Lowest Priority Flag for Mailbox 0 */ -#define CAN_TSR_LOW1 ((u32)0x40000000) /* Lowest Priority Flag for Mailbox 1 */ -#define CAN_TSR_LOW2 ((u32)0x80000000) /* Lowest Priority Flag for Mailbox 2 */ - - -/******************* Bit definition for CAN_RF0R register *******************/ -#define CAN_RF0R_FMP0 ((u8)0x03) /* FIFO 0 Message Pending */ -#define CAN_RF0R_FULL0 ((u8)0x08) /* FIFO 0 Full */ -#define CAN_RF0R_FOVR0 ((u8)0x10) /* FIFO 0 Overrun */ -#define CAN_RF0R_RFOM0 ((u8)0x20) /* Release FIFO 0 Output Mailbox */ - - -/******************* Bit definition for CAN_RF1R register *******************/ -#define CAN_RF1R_FMP1 ((u8)0x03) /* FIFO 1 Message Pending */ -#define CAN_RF1R_FULL1 ((u8)0x08) /* FIFO 1 Full */ -#define CAN_RF1R_FOVR1 ((u8)0x10) /* FIFO 1 Overrun */ -#define CAN_RF1R_RFOM1 ((u8)0x20) /* Release FIFO 1 Output Mailbox */ - - -/******************** Bit definition for CAN_IER register *******************/ -#define CAN_IER_TMEIE ((u32)0x00000001) /* Transmit Mailbox Empty Interrupt Enable */ -#define CAN_IER_FMPIE0 ((u32)0x00000002) /* FIFO Message Pending Interrupt Enable */ -#define CAN_IER_FFIE0 ((u32)0x00000004) /* FIFO Full Interrupt Enable */ -#define CAN_IER_FOVIE0 ((u32)0x00000008) /* FIFO Overrun Interrupt Enable */ -#define CAN_IER_FMPIE1 ((u32)0x00000010) /* FIFO Message Pending Interrupt Enable */ -#define CAN_IER_FFIE1 ((u32)0x00000020) /* FIFO Full Interrupt Enable */ -#define CAN_IER_FOVIE1 ((u32)0x00000040) /* FIFO Overrun Interrupt Enable */ -#define CAN_IER_EWGIE ((u32)0x00000100) /* Error Warning Interrupt Enable */ -#define CAN_IER_EPVIE ((u32)0x00000200) /* Error Passive Interrupt Enable */ -#define CAN_IER_BOFIE ((u32)0x00000400) /* Bus-Off Interrupt Enable */ -#define CAN_IER_LECIE ((u32)0x00000800) /* Last Error Code Interrupt Enable */ -#define CAN_IER_ERRIE ((u32)0x00008000) /* Error Interrupt Enable */ -#define CAN_IER_WKUIE ((u32)0x00010000) /* Wakeup Interrupt Enable */ -#define CAN_IER_SLKIE ((u32)0x00020000) /* Sleep Interrupt Enable */ - - -/******************** Bit definition for CAN_ESR register *******************/ -#define CAN_ESR_EWGF ((u32)0x00000001) /* Error Warning Flag */ -#define CAN_ESR_EPVF ((u32)0x00000002) /* Error Passive Flag */ -#define CAN_ESR_BOFF ((u32)0x00000004) /* Bus-Off Flag */ - -#define CAN_ESR_LEC ((u32)0x00000070) /* LEC[2:0] bits (Last Error Code) */ -#define CAN_ESR_LEC_0 ((u32)0x00000010) /* Bit 0 */ -#define CAN_ESR_LEC_1 ((u32)0x00000020) /* Bit 1 */ -#define CAN_ESR_LEC_2 ((u32)0x00000040) /* Bit 2 */ - -#define CAN_ESR_TEC ((u32)0x00FF0000) /* Least significant byte of the 9-bit Transmit Error Counter */ -#define CAN_ESR_REC ((u32)0xFF000000) /* Receive Error Counter */ - - -/******************* Bit definition for CAN_BTR register ********************/ -#define CAN_BTR_BRP ((u32)0x000003FF) /* Baud Rate Prescaler */ -#define CAN_BTR_TS1 ((u32)0x000F0000) /* Time Segment 1 */ -#define CAN_BTR_TS2 ((u32)0x00700000) /* Time Segment 2 */ -#define CAN_BTR_SJW ((u32)0x03000000) /* Resynchronization Jump Width */ -#define CAN_BTR_LBKM ((u32)0x40000000) /* Loop Back Mode (Debug) */ -#define CAN_BTR_SILM ((u32)0x80000000) /* Silent Mode */ - - -/* Mailbox registers */ -/****************** Bit definition for CAN_TI0R register ********************/ -#define CAN_TI0R_TXRQ ((u32)0x00000001) /* Transmit Mailbox Request */ -#define CAN_TI0R_RTR ((u32)0x00000002) /* Remote Transmission Request */ -#define CAN_TI0R_IDE ((u32)0x00000004) /* Identifier Extension */ -#define CAN_TI0R_EXID ((u32)0x001FFFF8) /* Extended Identifier */ -#define CAN_TI0R_STID ((u32)0xFFE00000) /* Standard Identifier or Extended Identifier */ - - -/****************** Bit definition for CAN_TDT0R register *******************/ -#define CAN_TDT0R_DLC ((u32)0x0000000F) /* Data Length Code */ -#define CAN_TDT0R_TGT ((u32)0x00000100) /* Transmit Global Time */ -#define CAN_TDT0R_TIME ((u32)0xFFFF0000) /* Message Time Stamp */ - - -/****************** Bit definition for CAN_TDL0R register *******************/ -#define CAN_TDL0R_DATA0 ((u32)0x000000FF) /* Data byte 0 */ -#define CAN_TDL0R_DATA1 ((u32)0x0000FF00) /* Data byte 1 */ -#define CAN_TDL0R_DATA2 ((u32)0x00FF0000) /* Data byte 2 */ -#define CAN_TDL0R_DATA3 ((u32)0xFF000000) /* Data byte 3 */ - - -/****************** Bit definition for CAN_TDH0R register *******************/ -#define CAN_TDH0R_DATA4 ((u32)0x000000FF) /* Data byte 4 */ -#define CAN_TDH0R_DATA5 ((u32)0x0000FF00) /* Data byte 5 */ -#define CAN_TDH0R_DATA6 ((u32)0x00FF0000) /* Data byte 6 */ -#define CAN_TDH0R_DATA7 ((u32)0xFF000000) /* Data byte 7 */ - - -/******************* Bit definition for CAN_TI1R register *******************/ -#define CAN_TI1R_TXRQ ((u32)0x00000001) /* Transmit Mailbox Request */ -#define CAN_TI1R_RTR ((u32)0x00000002) /* Remote Transmission Request */ -#define CAN_TI1R_IDE ((u32)0x00000004) /* Identifier Extension */ -#define CAN_TI1R_EXID ((u32)0x001FFFF8) /* Extended Identifier */ -#define CAN_TI1R_STID ((u32)0xFFE00000) /* Standard Identifier or Extended Identifier */ - - -/******************* Bit definition for CAN_TDT1R register ******************/ -#define CAN_TDT1R_DLC ((u32)0x0000000F) /* Data Length Code */ -#define CAN_TDT1R_TGT ((u32)0x00000100) /* Transmit Global Time */ -#define CAN_TDT1R_TIME ((u32)0xFFFF0000) /* Message Time Stamp */ - - -/******************* Bit definition for CAN_TDL1R register ******************/ -#define CAN_TDL1R_DATA0 ((u32)0x000000FF) /* Data byte 0 */ -#define CAN_TDL1R_DATA1 ((u32)0x0000FF00) /* Data byte 1 */ -#define CAN_TDL1R_DATA2 ((u32)0x00FF0000) /* Data byte 2 */ -#define CAN_TDL1R_DATA3 ((u32)0xFF000000) /* Data byte 3 */ - - -/******************* Bit definition for CAN_TDH1R register ******************/ -#define CAN_TDH1R_DATA4 ((u32)0x000000FF) /* Data byte 4 */ -#define CAN_TDH1R_DATA5 ((u32)0x0000FF00) /* Data byte 5 */ -#define CAN_TDH1R_DATA6 ((u32)0x00FF0000) /* Data byte 6 */ -#define CAN_TDH1R_DATA7 ((u32)0xFF000000) /* Data byte 7 */ - - -/******************* Bit definition for CAN_TI2R register *******************/ -#define CAN_TI2R_TXRQ ((u32)0x00000001) /* Transmit Mailbox Request */ -#define CAN_TI2R_RTR ((u32)0x00000002) /* Remote Transmission Request */ -#define CAN_TI2R_IDE ((u32)0x00000004) /* Identifier Extension */ -#define CAN_TI2R_EXID ((u32)0x001FFFF8) /* Extended identifier */ -#define CAN_TI2R_STID ((u32)0xFFE00000) /* Standard Identifier or Extended Identifier */ - - -/******************* Bit definition for CAN_TDT2R register ******************/ -#define CAN_TDT2R_DLC ((u32)0x0000000F) /* Data Length Code */ -#define CAN_TDT2R_TGT ((u32)0x00000100) /* Transmit Global Time */ -#define CAN_TDT2R_TIME ((u32)0xFFFF0000) /* Message Time Stamp */ - - -/******************* Bit definition for CAN_TDL2R register ******************/ -#define CAN_TDL2R_DATA0 ((u32)0x000000FF) /* Data byte 0 */ -#define CAN_TDL2R_DATA1 ((u32)0x0000FF00) /* Data byte 1 */ -#define CAN_TDL2R_DATA2 ((u32)0x00FF0000) /* Data byte 2 */ -#define CAN_TDL2R_DATA3 ((u32)0xFF000000) /* Data byte 3 */ - - -/******************* Bit definition for CAN_TDH2R register ******************/ -#define CAN_TDH2R_DATA4 ((u32)0x000000FF) /* Data byte 4 */ -#define CAN_TDH2R_DATA5 ((u32)0x0000FF00) /* Data byte 5 */ -#define CAN_TDH2R_DATA6 ((u32)0x00FF0000) /* Data byte 6 */ -#define CAN_TDH2R_DATA7 ((u32)0xFF000000) /* Data byte 7 */ - - -/******************* Bit definition for CAN_RI0R register *******************/ -#define CAN_RI0R_RTR ((u32)0x00000002) /* Remote Transmission Request */ -#define CAN_RI0R_IDE ((u32)0x00000004) /* Identifier Extension */ -#define CAN_RI0R_EXID ((u32)0x001FFFF8) /* Extended Identifier */ -#define CAN_RI0R_STID ((u32)0xFFE00000) /* Standard Identifier or Extended Identifier */ - - -/******************* Bit definition for CAN_RDT0R register ******************/ -#define CAN_RDT0R_DLC ((u32)0x0000000F) /* Data Length Code */ -#define CAN_RDT0R_FMI ((u32)0x0000FF00) /* Filter Match Index */ -#define CAN_RDT0R_TIME ((u32)0xFFFF0000) /* Message Time Stamp */ - - -/******************* Bit definition for CAN_RDL0R register ******************/ -#define CAN_RDL0R_DATA0 ((u32)0x000000FF) /* Data byte 0 */ -#define CAN_RDL0R_DATA1 ((u32)0x0000FF00) /* Data byte 1 */ -#define CAN_RDL0R_DATA2 ((u32)0x00FF0000) /* Data byte 2 */ -#define CAN_RDL0R_DATA3 ((u32)0xFF000000) /* Data byte 3 */ - - -/******************* Bit definition for CAN_RDH0R register ******************/ -#define CAN_RDH0R_DATA4 ((u32)0x000000FF) /* Data byte 4 */ -#define CAN_RDH0R_DATA5 ((u32)0x0000FF00) /* Data byte 5 */ -#define CAN_RDH0R_DATA6 ((u32)0x00FF0000) /* Data byte 6 */ -#define CAN_RDH0R_DATA7 ((u32)0xFF000000) /* Data byte 7 */ - - -/******************* Bit definition for CAN_RI1R register *******************/ -#define CAN_RI1R_RTR ((u32)0x00000002) /* Remote Transmission Request */ -#define CAN_RI1R_IDE ((u32)0x00000004) /* Identifier Extension */ -#define CAN_RI1R_EXID ((u32)0x001FFFF8) /* Extended identifier */ -#define CAN_RI1R_STID ((u32)0xFFE00000) /* Standard Identifier or Extended Identifier */ - - -/******************* Bit definition for CAN_RDT1R register ******************/ -#define CAN_RDT1R_DLC ((u32)0x0000000F) /* Data Length Code */ -#define CAN_RDT1R_FMI ((u32)0x0000FF00) /* Filter Match Index */ -#define CAN_RDT1R_TIME ((u32)0xFFFF0000) /* Message Time Stamp */ - - -/******************* Bit definition for CAN_RDL1R register ******************/ -#define CAN_RDL1R_DATA0 ((u32)0x000000FF) /* Data byte 0 */ -#define CAN_RDL1R_DATA1 ((u32)0x0000FF00) /* Data byte 1 */ -#define CAN_RDL1R_DATA2 ((u32)0x00FF0000) /* Data byte 2 */ -#define CAN_RDL1R_DATA3 ((u32)0xFF000000) /* Data byte 3 */ - - -/******************* Bit definition for CAN_RDH1R register ******************/ -#define CAN_RDH1R_DATA4 ((u32)0x000000FF) /* Data byte 4 */ -#define CAN_RDH1R_DATA5 ((u32)0x0000FF00) /* Data byte 5 */ -#define CAN_RDH1R_DATA6 ((u32)0x00FF0000) /* Data byte 6 */ -#define CAN_RDH1R_DATA7 ((u32)0xFF000000) /* Data byte 7 */ - -/* CAN filter registers */ -/******************* Bit definition for CAN_FMR register ********************/ -#define CAN_FMR_FINIT ((u8)0x01) /* Filter Init Mode */ - - -/******************* Bit definition for CAN_FM1R register *******************/ -#define CAN_FM1R_FBM ((u16)0x3FFF) /* Filter Mode */ -#define CAN_FM1R_FBM0 ((u16)0x0001) /* Filter Init Mode bit 0 */ -#define CAN_FM1R_FBM1 ((u16)0x0002) /* Filter Init Mode bit 1 */ -#define CAN_FM1R_FBM2 ((u16)0x0004) /* Filter Init Mode bit 2 */ -#define CAN_FM1R_FBM3 ((u16)0x0008) /* Filter Init Mode bit 3 */ -#define CAN_FM1R_FBM4 ((u16)0x0010) /* Filter Init Mode bit 4 */ -#define CAN_FM1R_FBM5 ((u16)0x0020) /* Filter Init Mode bit 5 */ -#define CAN_FM1R_FBM6 ((u16)0x0040) /* Filter Init Mode bit 6 */ -#define CAN_FM1R_FBM7 ((u16)0x0080) /* Filter Init Mode bit 7 */ -#define CAN_FM1R_FBM8 ((u16)0x0100) /* Filter Init Mode bit 8 */ -#define CAN_FM1R_FBM9 ((u16)0x0200) /* Filter Init Mode bit 9 */ -#define CAN_FM1R_FBM10 ((u16)0x0400) /* Filter Init Mode bit 10 */ -#define CAN_FM1R_FBM11 ((u16)0x0800) /* Filter Init Mode bit 11 */ -#define CAN_FM1R_FBM12 ((u16)0x1000) /* Filter Init Mode bit 12 */ -#define CAN_FM1R_FBM13 ((u16)0x2000) /* Filter Init Mode bit 13 */ - - -/******************* Bit definition for CAN_FS1R register *******************/ -#define CAN_FS1R_FSC ((u16)0x3FFF) /* Filter Scale Configuration */ -#define CAN_FS1R_FSC0 ((u16)0x0001) /* Filter Scale Configuration bit 0 */ -#define CAN_FS1R_FSC1 ((u16)0x0002) /* Filter Scale Configuration bit 1 */ -#define CAN_FS1R_FSC2 ((u16)0x0004) /* Filter Scale Configuration bit 2 */ -#define CAN_FS1R_FSC3 ((u16)0x0008) /* Filter Scale Configuration bit 3 */ -#define CAN_FS1R_FSC4 ((u16)0x0010) /* Filter Scale Configuration bit 4 */ -#define CAN_FS1R_FSC5 ((u16)0x0020) /* Filter Scale Configuration bit 5 */ -#define CAN_FS1R_FSC6 ((u16)0x0040) /* Filter Scale Configuration bit 6 */ -#define CAN_FS1R_FSC7 ((u16)0x0080) /* Filter Scale Configuration bit 7 */ -#define CAN_FS1R_FSC8 ((u16)0x0100) /* Filter Scale Configuration bit 8 */ -#define CAN_FS1R_FSC9 ((u16)0x0200) /* Filter Scale Configuration bit 9 */ -#define CAN_FS1R_FSC10 ((u16)0x0400) /* Filter Scale Configuration bit 10 */ -#define CAN_FS1R_FSC11 ((u16)0x0800) /* Filter Scale Configuration bit 11 */ -#define CAN_FS1R_FSC12 ((u16)0x1000) /* Filter Scale Configuration bit 12 */ -#define CAN_FS1R_FSC13 ((u16)0x2000) /* Filter Scale Configuration bit 13 */ - - -/****************** Bit definition for CAN_FFA1R register *******************/ -#define CAN_FFA1R_FFA ((u16)0x3FFF) /* Filter FIFO Assignment */ -#define CAN_FFA1R_FFA0 ((u16)0x0001) /* Filter FIFO Assignment for Filter 0 */ -#define CAN_FFA1R_FFA1 ((u16)0x0002) /* Filter FIFO Assignment for Filter 1 */ -#define CAN_FFA1R_FFA2 ((u16)0x0004) /* Filter FIFO Assignment for Filter 2 */ -#define CAN_FFA1R_FFA3 ((u16)0x0008) /* Filter FIFO Assignment for Filter 3 */ -#define CAN_FFA1R_FFA4 ((u16)0x0010) /* Filter FIFO Assignment for Filter 4 */ -#define CAN_FFA1R_FFA5 ((u16)0x0020) /* Filter FIFO Assignment for Filter 5 */ -#define CAN_FFA1R_FFA6 ((u16)0x0040) /* Filter FIFO Assignment for Filter 6 */ -#define CAN_FFA1R_FFA7 ((u16)0x0080) /* Filter FIFO Assignment for Filter 7 */ -#define CAN_FFA1R_FFA8 ((u16)0x0100) /* Filter FIFO Assignment for Filter 8 */ -#define CAN_FFA1R_FFA9 ((u16)0x0200) /* Filter FIFO Assignment for Filter 9 */ -#define CAN_FFA1R_FFA10 ((u16)0x0400) /* Filter FIFO Assignment for Filter 10 */ -#define CAN_FFA1R_FFA11 ((u16)0x0800) /* Filter FIFO Assignment for Filter 11 */ -#define CAN_FFA1R_FFA12 ((u16)0x1000) /* Filter FIFO Assignment for Filter 12 */ -#define CAN_FFA1R_FFA13 ((u16)0x2000) /* Filter FIFO Assignment for Filter 13 */ - - -/******************* Bit definition for CAN_FA1R register *******************/ -#define CAN_FA1R_FACT ((u16)0x3FFF) /* Filter Active */ -#define CAN_FA1R_FACT0 ((u16)0x0001) /* Filter 0 Active */ -#define CAN_FA1R_FACT1 ((u16)0x0002) /* Filter 1 Active */ -#define CAN_FA1R_FACT2 ((u16)0x0004) /* Filter 2 Active */ -#define CAN_FA1R_FACT3 ((u16)0x0008) /* Filter 3 Active */ -#define CAN_FA1R_FACT4 ((u16)0x0010) /* Filter 4 Active */ -#define CAN_FA1R_FACT5 ((u16)0x0020) /* Filter 5 Active */ -#define CAN_FA1R_FACT6 ((u16)0x0040) /* Filter 6 Active */ -#define CAN_FA1R_FACT7 ((u16)0x0080) /* Filter 7 Active */ -#define CAN_FA1R_FACT8 ((u16)0x0100) /* Filter 8 Active */ -#define CAN_FA1R_FACT9 ((u16)0x0200) /* Filter 9 Active */ -#define CAN_FA1R_FACT10 ((u16)0x0400) /* Filter 10 Active */ -#define CAN_FA1R_FACT11 ((u16)0x0800) /* Filter 11 Active */ -#define CAN_FA1R_FACT12 ((u16)0x1000) /* Filter 12 Active */ -#define CAN_FA1R_FACT13 ((u16)0x2000) /* Filter 13 Active */ - - -/******************* Bit definition for CAN_F0R1 register *******************/ -#define CAN_F0R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F0R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F0R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F0R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F0R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F0R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F0R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F0R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F0R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F0R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F0R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F0R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F0R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F0R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F0R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F0R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F0R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F0R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F0R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F0R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F0R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F0R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F0R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F0R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F0R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F0R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F0R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F0R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F0R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F0R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F0R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F0R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F1R1 register *******************/ -#define CAN_F1R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F1R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F1R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F1R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F1R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F1R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F1R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F1R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F1R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F1R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F1R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F1R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F1R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F1R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F1R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F1R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F1R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F1R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F1R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F1R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F1R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F1R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F1R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F1R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F1R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F1R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F1R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F1R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F1R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F1R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F1R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F1R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F2R1 register *******************/ -#define CAN_F2R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F2R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F2R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F2R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F2R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F2R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F2R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F2R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F2R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F2R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F2R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F2R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F2R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F2R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F2R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F2R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F2R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F2R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F2R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F2R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F2R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F2R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F2R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F2R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F2R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F2R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F2R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F2R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F2R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F2R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F2R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F2R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F3R1 register *******************/ -#define CAN_F3R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F3R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F3R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F3R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F3R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F3R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F3R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F3R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F3R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F3R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F3R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F3R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F3R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F3R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F3R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F3R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F3R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F3R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F3R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F3R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F3R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F3R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F3R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F3R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F3R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F3R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F3R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F3R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F3R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F3R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F3R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F3R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F4R1 register *******************/ -#define CAN_F4R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F4R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F4R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F4R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F4R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F4R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F4R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F4R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F4R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F4R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F4R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F4R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F4R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F4R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F4R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F4R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F4R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F4R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F4R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F4R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F4R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F4R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F4R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F4R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F4R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F4R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F4R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F4R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F4R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F4R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F4R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F4R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F5R1 register *******************/ -#define CAN_F5R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F5R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F5R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F5R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F5R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F5R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F5R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F5R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F5R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F5R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F5R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F5R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F5R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F5R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F5R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F5R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F5R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F5R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F5R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F5R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F5R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F5R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F5R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F5R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F5R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F5R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F5R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F5R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F5R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F5R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F5R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F5R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F6R1 register *******************/ -#define CAN_F6R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F6R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F6R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F6R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F6R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F6R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F6R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F6R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F6R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F6R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F6R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F6R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F6R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F6R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F6R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F6R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F6R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F6R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F6R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F6R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F6R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F6R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F6R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F6R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F6R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F6R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F6R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F6R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F6R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F6R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F6R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F6R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F7R1 register *******************/ -#define CAN_F7R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F7R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F7R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F7R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F7R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F7R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F7R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F7R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F7R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F7R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F7R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F7R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F7R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F7R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F7R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F7R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F7R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F7R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F7R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F7R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F7R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F7R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F7R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F7R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F7R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F7R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F7R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F7R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F7R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F7R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F7R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F7R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F8R1 register *******************/ -#define CAN_F8R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F8R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F8R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F8R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F8R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F8R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F8R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F8R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F8R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F8R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F8R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F8R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F8R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F8R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F8R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F8R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F8R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F8R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F8R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F8R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F8R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F8R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F8R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F8R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F8R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F8R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F8R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F8R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F8R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F8R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F8R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F8R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F9R1 register *******************/ -#define CAN_F9R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F9R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F9R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F9R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F9R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F9R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F9R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F9R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F9R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F9R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F9R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F9R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F9R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F9R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F9R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F9R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F9R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F9R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F9R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F9R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F9R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F9R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F9R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F9R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F9R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F9R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F9R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F9R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F9R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F9R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F9R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F9R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F10R1 register ******************/ -#define CAN_F10R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F10R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F10R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F10R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F10R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F10R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F10R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F10R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F10R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F10R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F10R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F10R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F10R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F10R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F10R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F10R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F10R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F10R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F10R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F10R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F10R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F10R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F10R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F10R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F10R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F10R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F10R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F10R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F10R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F10R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F10R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F10R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F11R1 register ******************/ -#define CAN_F11R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F11R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F11R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F11R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F11R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F11R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F11R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F11R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F11R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F11R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F11R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F11R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F11R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F11R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F11R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F11R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F11R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F11R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F11R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F11R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F11R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F11R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F11R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F11R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F11R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F11R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F11R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F11R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F11R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F11R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F11R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F11R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F12R1 register ******************/ -#define CAN_F12R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F12R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F12R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F12R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F12R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F12R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F12R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F12R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F12R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F12R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F12R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F12R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F12R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F12R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F12R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F12R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F12R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F12R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F12R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F12R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F12R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F12R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F12R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F12R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F12R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F12R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F12R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F12R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F12R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F12R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F12R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F12R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F13R1 register ******************/ -#define CAN_F13R1_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F13R1_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F13R1_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F13R1_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F13R1_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F13R1_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F13R1_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F13R1_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F13R1_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F13R1_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F13R1_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F13R1_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F13R1_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F13R1_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F13R1_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F13R1_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F13R1_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F13R1_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F13R1_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F13R1_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F13R1_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F13R1_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F13R1_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F13R1_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F13R1_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F13R1_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F13R1_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F13R1_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F13R1_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F13R1_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F13R1_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F13R1_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F0R2 register *******************/ -#define CAN_F0R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F0R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F0R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F0R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F0R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F0R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F0R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F0R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F0R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F0R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F0R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F0R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F0R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F0R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F0R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F0R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F0R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F0R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F0R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F0R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F0R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F0R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F0R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F0R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F0R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F0R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F0R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F0R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F0R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F0R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F0R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F0R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F1R2 register *******************/ -#define CAN_F1R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F1R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F1R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F1R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F1R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F1R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F1R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F1R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F1R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F1R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F1R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F1R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F1R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F1R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F1R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F1R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F1R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F1R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F1R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F1R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F1R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F1R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F1R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F1R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F1R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F1R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F1R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F1R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F1R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F1R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F1R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F1R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F2R2 register *******************/ -#define CAN_F2R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F2R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F2R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F2R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F2R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F2R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F2R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F2R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F2R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F2R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F2R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F2R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F2R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F2R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F2R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F2R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F2R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F2R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F2R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F2R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F2R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F2R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F2R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F2R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F2R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F2R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F2R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F2R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F2R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F2R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F2R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F2R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F3R2 register *******************/ -#define CAN_F3R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F3R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F3R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F3R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F3R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F3R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F3R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F3R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F3R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F3R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F3R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F3R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F3R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F3R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F3R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F3R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F3R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F3R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F3R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F3R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F3R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F3R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F3R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F3R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F3R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F3R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F3R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F3R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F3R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F3R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F3R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F3R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F4R2 register *******************/ -#define CAN_F4R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F4R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F4R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F4R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F4R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F4R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F4R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F4R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F4R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F4R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F4R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F4R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F4R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F4R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F4R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F4R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F4R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F4R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F4R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F4R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F4R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F4R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F4R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F4R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F4R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F4R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F4R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F4R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F4R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F4R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F4R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F4R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F5R2 register *******************/ -#define CAN_F5R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F5R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F5R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F5R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F5R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F5R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F5R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F5R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F5R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F5R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F5R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F5R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F5R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F5R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F5R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F5R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F5R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F5R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F5R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F5R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F5R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F5R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F5R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F5R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F5R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F5R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F5R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F5R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F5R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F5R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F5R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F5R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F6R2 register *******************/ -#define CAN_F6R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F6R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F6R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F6R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F6R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F6R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F6R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F6R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F6R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F6R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F6R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F6R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F6R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F6R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F6R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F6R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F6R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F6R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F6R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F6R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F6R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F6R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F6R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F6R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F6R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F6R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F6R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F6R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F6R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F6R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F6R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F6R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F7R2 register *******************/ -#define CAN_F7R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F7R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F7R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F7R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F7R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F7R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F7R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F7R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F7R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F7R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F7R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F7R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F7R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F7R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F7R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F7R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F7R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F7R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F7R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F7R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F7R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F7R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F7R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F7R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F7R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F7R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F7R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F7R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F7R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F7R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F7R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F7R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F8R2 register *******************/ -#define CAN_F8R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F8R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F8R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F8R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F8R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F8R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F8R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F8R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F8R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F8R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F8R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F8R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F8R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F8R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F8R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F8R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F8R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F8R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F8R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F8R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F8R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F8R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F8R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F8R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F8R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F8R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F8R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F8R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F8R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F8R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F8R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F8R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F9R2 register *******************/ -#define CAN_F9R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F9R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F9R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F9R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F9R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F9R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F9R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F9R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F9R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F9R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F9R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F9R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F9R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F9R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F9R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F9R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F9R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F9R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F9R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F9R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F9R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F9R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F9R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F9R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F9R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F9R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F9R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F9R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F9R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F9R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F9R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F9R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F10R2 register ******************/ -#define CAN_F10R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F10R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F10R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F10R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F10R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F10R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F10R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F10R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F10R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F10R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F10R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F10R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F10R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F10R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F10R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F10R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F10R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F10R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F10R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F10R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F10R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F10R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F10R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F10R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F10R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F10R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F10R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F10R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F10R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F10R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F10R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F10R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F11R2 register ******************/ -#define CAN_F11R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F11R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F11R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F11R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F11R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F11R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F11R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F11R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F11R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F11R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F11R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F11R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F11R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F11R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F11R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F11R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F11R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F11R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F11R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F11R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F11R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F11R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F11R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F11R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F11R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F11R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F11R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F11R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F11R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F11R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F11R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F11R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F12R2 register ******************/ -#define CAN_F12R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F12R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F12R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F12R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F12R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F12R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F12R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F12R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F12R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F12R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F12R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F12R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F12R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F12R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F12R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F12R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F12R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F12R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F12R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F12R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F12R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F12R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F12R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F12R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F12R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F12R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F12R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F12R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F12R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F12R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F12R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F12R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - -/******************* Bit definition for CAN_F13R2 register ******************/ -#define CAN_F13R2_FB0 ((u32)0x00000001) /* Filter bit 0 */ -#define CAN_F13R2_FB1 ((u32)0x00000002) /* Filter bit 1 */ -#define CAN_F13R2_FB2 ((u32)0x00000004) /* Filter bit 2 */ -#define CAN_F13R2_FB3 ((u32)0x00000008) /* Filter bit 3 */ -#define CAN_F13R2_FB4 ((u32)0x00000010) /* Filter bit 4 */ -#define CAN_F13R2_FB5 ((u32)0x00000020) /* Filter bit 5 */ -#define CAN_F13R2_FB6 ((u32)0x00000040) /* Filter bit 6 */ -#define CAN_F13R2_FB7 ((u32)0x00000080) /* Filter bit 7 */ -#define CAN_F13R2_FB8 ((u32)0x00000100) /* Filter bit 8 */ -#define CAN_F13R2_FB9 ((u32)0x00000200) /* Filter bit 9 */ -#define CAN_F13R2_FB10 ((u32)0x00000400) /* Filter bit 10 */ -#define CAN_F13R2_FB11 ((u32)0x00000800) /* Filter bit 11 */ -#define CAN_F13R2_FB12 ((u32)0x00001000) /* Filter bit 12 */ -#define CAN_F13R2_FB13 ((u32)0x00002000) /* Filter bit 13 */ -#define CAN_F13R2_FB14 ((u32)0x00004000) /* Filter bit 14 */ -#define CAN_F13R2_FB15 ((u32)0x00008000) /* Filter bit 15 */ -#define CAN_F13R2_FB16 ((u32)0x00010000) /* Filter bit 16 */ -#define CAN_F13R2_FB17 ((u32)0x00020000) /* Filter bit 17 */ -#define CAN_F13R2_FB18 ((u32)0x00040000) /* Filter bit 18 */ -#define CAN_F13R2_FB19 ((u32)0x00080000) /* Filter bit 19 */ -#define CAN_F13R2_FB20 ((u32)0x00100000) /* Filter bit 20 */ -#define CAN_F13R2_FB21 ((u32)0x00200000) /* Filter bit 21 */ -#define CAN_F13R2_FB22 ((u32)0x00400000) /* Filter bit 22 */ -#define CAN_F13R2_FB23 ((u32)0x00800000) /* Filter bit 23 */ -#define CAN_F13R2_FB24 ((u32)0x01000000) /* Filter bit 24 */ -#define CAN_F13R2_FB25 ((u32)0x02000000) /* Filter bit 25 */ -#define CAN_F13R2_FB26 ((u32)0x04000000) /* Filter bit 26 */ -#define CAN_F13R2_FB27 ((u32)0x08000000) /* Filter bit 27 */ -#define CAN_F13R2_FB28 ((u32)0x10000000) /* Filter bit 28 */ -#define CAN_F13R2_FB29 ((u32)0x20000000) /* Filter bit 29 */ -#define CAN_F13R2_FB30 ((u32)0x40000000) /* Filter bit 30 */ -#define CAN_F13R2_FB31 ((u32)0x80000000) /* Filter bit 31 */ - - - -/******************************************************************************/ -/* */ -/* Serial Peripheral Interface */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for SPI_CR1 register ********************/ -#define SPI_CR1_CPHA ((u16)0x0001) /* Clock Phase */ -#define SPI_CR1_CPOL ((u16)0x0002) /* Clock Polarity */ -#define SPI_CR1_MSTR ((u16)0x0004) /* Master Selection */ - -#define SPI_CR1_BR ((u16)0x0038) /* BR[2:0] bits (Baud Rate Control) */ -#define SPI_CR1_BR_0 ((u16)0x0008) /* Bit 0 */ -#define SPI_CR1_BR_1 ((u16)0x0010) /* Bit 1 */ -#define SPI_CR1_BR_2 ((u16)0x0020) /* Bit 2 */ - -#define SPI_CR1_SPE ((u16)0x0040) /* SPI Enable */ -#define SPI_CR1_LSBFIRST ((u16)0x0080) /* Frame Format */ -#define SPI_CR1_SSI ((u16)0x0100) /* Internal slave select */ -#define SPI_CR1_SSM ((u16)0x0200) /* Software slave management */ -#define SPI_CR1_RXONLY ((u16)0x0400) /* Receive only */ -#define SPI_CR1_DFF ((u16)0x0800) /* Data Frame Format */ -#define SPI_CR1_CRCNEXT ((u16)0x1000) /* Transmit CRC next */ -#define SPI_CR1_CRCEN ((u16)0x2000) /* Hardware CRC calculation enable */ -#define SPI_CR1_BIDIOE ((u16)0x4000) /* Output enable in bidirectional mode */ -#define SPI_CR1_BIDIMODE ((u16)0x8000) /* Bidirectional data mode enable */ - - -/******************* Bit definition for SPI_CR2 register ********************/ -#define SPI_CR2_RXDMAEN ((u8)0x01) /* Rx Buffer DMA Enable */ -#define SPI_CR2_TXDMAEN ((u8)0x02) /* Tx Buffer DMA Enable */ -#define SPI_CR2_SSOE ((u8)0x04) /* SS Output Enable */ -#define SPI_CR2_ERRIE ((u8)0x20) /* Error Interrupt Enable */ -#define SPI_CR2_RXNEIE ((u8)0x40) /* RX buffer Not Empty Interrupt Enable */ -#define SPI_CR2_TXEIE ((u8)0x80) /* Tx buffer Empty Interrupt Enable */ - - -/******************** Bit definition for SPI_SR register ********************/ -#define SPI_SR_RXNE ((u8)0x01) /* Receive buffer Not Empty */ -#define SPI_SR_TXE ((u8)0x02) /* Transmit buffer Empty */ -#define SPI_SR_CHSIDE ((u8)0x04) /* Channel side */ -#define SPI_SR_UDR ((u8)0x08) /* Underrun flag */ -#define SPI_SR_CRCERR ((u8)0x10) /* CRC Error flag */ -#define SPI_SR_MODF ((u8)0x20) /* Mode fault */ -#define SPI_SR_OVR ((u8)0x40) /* Overrun flag */ -#define SPI_SR_BSY ((u8)0x80) /* Busy flag */ - - -/******************** Bit definition for SPI_DR register ********************/ -#define SPI_DR_DR ((u16)0xFFFF) /* Data Register */ - - -/******************* Bit definition for SPI_CRCPR register ******************/ -#define SPI_CRCPR_CRCPOLY ((u16)0xFFFF) /* CRC polynomial register */ - - -/****************** Bit definition for SPI_RXCRCR register ******************/ -#define SPI_RXCRCR_RXCRC ((u16)0xFFFF) /* Rx CRC Register */ - - -/****************** Bit definition for SPI_TXCRCR register ******************/ -#define SPI_TXCRCR_TXCRC ((u16)0xFFFF) /* Tx CRC Register */ - - -/****************** Bit definition for SPI_I2SCFGR register *****************/ -#define SPI_I2SCFGR_CHLEN ((u16)0x0001) /* Channel length (number of bits per audio channel) */ - -#define SPI_I2SCFGR_DATLEN ((u16)0x0006) /* DATLEN[1:0] bits (Data length to be transferred) */ -#define SPI_I2SCFGR_DATLEN_0 ((u16)0x0002) /* Bit 0 */ -#define SPI_I2SCFGR_DATLEN_1 ((u16)0x0004) /* Bit 1 */ - -#define SPI_I2SCFGR_CKPOL ((u16)0x0008) /* steady state clock polarity */ - -#define SPI_I2SCFGR_I2SSTD ((u16)0x0030) /* I2SSTD[1:0] bits (I2S standard selection) */ -#define SPI_I2SCFGR_I2SSTD_0 ((u16)0x0010) /* Bit 0 */ -#define SPI_I2SCFGR_I2SSTD_1 ((u16)0x0020) /* Bit 1 */ - -#define SPI_I2SCFGR_PCMSYNC ((u16)0x0080) /* PCM frame synchronization */ - -#define SPI_I2SCFGR_I2SCFG ((u16)0x0300) /* I2SCFG[1:0] bits (I2S configuration mode) */ -#define SPI_I2SCFGR_I2SCFG_0 ((u16)0x0100) /* Bit 0 */ -#define SPI_I2SCFGR_I2SCFG_1 ((u16)0x0200) /* Bit 1 */ - -#define SPI_I2SCFGR_I2SE ((u16)0x0400) /* I2S Enable */ -#define SPI_I2SCFGR_I2SMOD ((u16)0x0800) /* I2S mode selection */ - - -/****************** Bit definition for SPI_I2SPR register *******************/ -#define SPI_I2SPR_I2SDIV ((u16)0x00FF) /* I2S Linear prescaler */ -#define SPI_I2SPR_ODD ((u16)0x0100) /* Odd factor for the prescaler */ -#define SPI_I2SPR_MCKOE ((u16)0x0200) /* Master Clock Output Enable */ - - - -/******************************************************************************/ -/* */ -/* Inter-integrated Circuit Interface */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for I2C_CR1 register ********************/ -#define I2C_CR1_PE ((u16)0x0001) /* Peripheral Enable */ -#define I2C_CR1_SMBUS ((u16)0x0002) /* SMBus Mode */ -#define I2C_CR1_SMBTYPE ((u16)0x0008) /* SMBus Type */ -#define I2C_CR1_ENARP ((u16)0x0010) /* ARP Enable */ -#define I2C_CR1_ENPEC ((u16)0x0020) /* PEC Enable */ -#define I2C_CR1_ENGC ((u16)0x0040) /* General Call Enable */ -#define I2C_CR1_NOSTRETCH ((u16)0x0080) /* Clock Stretching Disable (Slave mode) */ -#define I2C_CR1_START ((u16)0x0100) /* Start Generation */ -#define I2C_CR1_STOP ((u16)0x0200) /* Stop Generation */ -#define I2C_CR1_ACK ((u16)0x0400) /* Acknowledge Enable */ -#define I2C_CR1_POS ((u16)0x0800) /* Acknowledge/PEC Position (for data reception) */ -#define I2C_CR1_PEC ((u16)0x1000) /* Packet Error Checking */ -#define I2C_CR1_ALERT ((u16)0x2000) /* SMBus Alert */ -#define I2C_CR1_SWRST ((u16)0x8000) /* Software Reset */ - - -/******************* Bit definition for I2C_CR2 register ********************/ -#define I2C_CR2_FREQ ((u16)0x003F) /* FREQ[5:0] bits (Peripheral Clock Frequency) */ -#define I2C_CR2_FREQ_0 ((u16)0x0001) /* Bit 0 */ -#define I2C_CR2_FREQ_1 ((u16)0x0002) /* Bit 1 */ -#define I2C_CR2_FREQ_2 ((u16)0x0004) /* Bit 2 */ -#define I2C_CR2_FREQ_3 ((u16)0x0008) /* Bit 3 */ -#define I2C_CR2_FREQ_4 ((u16)0x0010) /* Bit 4 */ -#define I2C_CR2_FREQ_5 ((u16)0x0020) /* Bit 5 */ - -#define I2C_CR2_ITERREN ((u16)0x0100) /* Error Interrupt Enable */ -#define I2C_CR2_ITEVTEN ((u16)0x0200) /* Event Interrupt Enable */ -#define I2C_CR2_ITBUFEN ((u16)0x0400) /* Buffer Interrupt Enable */ -#define I2C_CR2_DMAEN ((u16)0x0800) /* DMA Requests Enable */ -#define I2C_CR2_LAST ((u16)0x1000) /* DMA Last Transfer */ - - -/******************* Bit definition for I2C_OAR1 register *******************/ -#define I2C_OAR1_ADD1_7 ((u16)0x00FE) /* Interface Address */ -#define I2C_OAR1_ADD8_9 ((u16)0x0300) /* Interface Address */ - -#define I2C_OAR1_ADD0 ((u16)0x0001) /* Bit 0 */ -#define I2C_OAR1_ADD1 ((u16)0x0002) /* Bit 1 */ -#define I2C_OAR1_ADD2 ((u16)0x0004) /* Bit 2 */ -#define I2C_OAR1_ADD3 ((u16)0x0008) /* Bit 3 */ -#define I2C_OAR1_ADD4 ((u16)0x0010) /* Bit 4 */ -#define I2C_OAR1_ADD5 ((u16)0x0020) /* Bit 5 */ -#define I2C_OAR1_ADD6 ((u16)0x0040) /* Bit 6 */ -#define I2C_OAR1_ADD7 ((u16)0x0080) /* Bit 7 */ -#define I2C_OAR1_ADD8 ((u16)0x0100) /* Bit 8 */ -#define I2C_OAR1_ADD9 ((u16)0x0200) /* Bit 9 */ - -#define I2C_OAR1_ADDMODE ((u16)0x8000) /* Addressing Mode (Slave mode) */ - - -/******************* Bit definition for I2C_OAR2 register *******************/ -#define I2C_OAR2_ENDUAL ((u8)0x01) /* Dual addressing mode enable */ -#define I2C_OAR2_ADD2 ((u8)0xFE) /* Interface address */ - - -/******************** Bit definition for I2C_DR register ********************/ -#define I2C_DR_DR ((u8)0xFF) /* 8-bit Data Register */ - - -/******************* Bit definition for I2C_SR1 register ********************/ -#define I2C_SR1_SB ((u16)0x0001) /* Start Bit (Master mode) */ -#define I2C_SR1_ADDR ((u16)0x0002) /* Address sent (master mode)/matched (slave mode) */ -#define I2C_SR1_BTF ((u16)0x0004) /* Byte Transfer Finished */ -#define I2C_SR1_ADD10 ((u16)0x0008) /* 10-bit header sent (Master mode) */ -#define I2C_SR1_STOPF ((u16)0x0010) /* Stop detection (Slave mode) */ -#define I2C_SR1_RXNE ((u16)0x0040) /* Data Register not Empty (receivers) */ -#define I2C_SR1_TXE ((u16)0x0080) /* Data Register Empty (transmitters) */ -#define I2C_SR1_BERR ((u16)0x0100) /* Bus Error */ -#define I2C_SR1_ARLO ((u16)0x0200) /* Arbitration Lost (master mode) */ -#define I2C_SR1_AF ((u16)0x0400) /* Acknowledge Failure */ -#define I2C_SR1_OVR ((u16)0x0800) /* Overrun/Underrun */ -#define I2C_SR1_PECERR ((u16)0x1000) /* PEC Error in reception */ -#define I2C_SR1_TIMEOUT ((u16)0x4000) /* Timeout or Tlow Error */ -#define I2C_SR1_SMBALERT ((u16)0x8000) /* SMBus Alert */ - - -/******************* Bit definition for I2C_SR2 register ********************/ -#define I2C_SR2_MSL ((u16)0x0001) /* Master/Slave */ -#define I2C_SR2_BUSY ((u16)0x0002) /* Bus Busy */ -#define I2C_SR2_TRA ((u16)0x0004) /* Transmitter/Receiver */ -#define I2C_SR2_GENCALL ((u16)0x0010) /* General Call Address (Slave mode) */ -#define I2C_SR2_SMBDEFAULT ((u16)0x0020) /* SMBus Device Default Address (Slave mode) */ -#define I2C_SR2_SMBHOST ((u16)0x0040) /* SMBus Host Header (Slave mode) */ -#define I2C_SR2_DUALF ((u16)0x0080) /* Dual Flag (Slave mode) */ -#define I2C_SR2_PEC ((u16)0xFF00) /* Packet Error Checking Register */ - - -/******************* Bit definition for I2C_CCR register ********************/ -#define I2C_CCR_CCR ((u16)0x0FFF) /* Clock Control Register in Fast/Standard mode (Master mode) */ -#define I2C_CCR_DUTY ((u16)0x4000) /* Fast Mode Duty Cycle */ -#define I2C_CCR_FS ((u16)0x8000) /* I2C Master Mode Selection */ - - -/****************** Bit definition for I2C_TRISE register *******************/ -#define I2C_TRISE_TRISE ((u8)0x3F) /* Maximum Rise Time in Fast/Standard mode (Master mode) */ - - - -/******************************************************************************/ -/* */ -/* Universal Synchronous Asynchronous Receiver Transmitter */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for USART_SR register *******************/ -#define USART_SR_PE ((u16)0x0001) /* Parity Error */ -#define USART_SR_FE ((u16)0x0002) /* Framing Error */ -#define USART_SR_NE ((u16)0x0004) /* Noise Error Flag */ -#define USART_SR_ORE ((u16)0x0008) /* OverRun Error */ -#define USART_SR_IDLE ((u16)0x0010) /* IDLE line detected */ -#define USART_SR_RXNE ((u16)0x0020) /* Read Data Register Not Empty */ -#define USART_SR_TC ((u16)0x0040) /* Transmission Complete */ -#define USART_SR_TXE ((u16)0x0080) /* Transmit Data Register Empty */ -#define USART_SR_LBD ((u16)0x0100) /* LIN Break Detection Flag */ -#define USART_SR_CTS ((u16)0x0200) /* CTS Flag */ - - -/******************* Bit definition for USART_DR register *******************/ -#define USART_DR_DR ((u16)0x01FF) /* Data value */ - - -/****************** Bit definition for USART_BRR register *******************/ -#define USART_BRR_DIV_Fraction ((u16)0x000F) /* Fraction of USARTDIV */ -#define USART_BRR_DIV_Mantissa ((u16)0xFFF0) /* Mantissa of USARTDIV */ - - -/****************** Bit definition for USART_CR1 register *******************/ -#define USART_CR1_SBK ((u16)0x0001) /* Send Break */ -#define USART_CR1_RWU ((u16)0x0002) /* Receiver wakeup */ -#define USART_CR1_RE ((u16)0x0004) /* Receiver Enable */ -#define USART_CR1_TE ((u16)0x0008) /* Transmitter Enable */ -#define USART_CR1_IDLEIE ((u16)0x0010) /* IDLE Interrupt Enable */ -#define USART_CR1_RXNEIE ((u16)0x0020) /* RXNE Interrupt Enable */ -#define USART_CR1_TCIE ((u16)0x0040) /* Transmission Complete Interrupt Enable */ -#define USART_CR1_TXEIE ((u16)0x0080) /* PE Interrupt Enable */ -#define USART_CR1_PEIE ((u16)0x0100) /* PE Interrupt Enable */ -#define USART_CR1_PS ((u16)0x0200) /* Parity Selection */ -#define USART_CR1_PCE ((u16)0x0400) /* Parity Control Enable */ -#define USART_CR1_WAKE ((u16)0x0800) /* Wakeup method */ -#define USART_CR1_M ((u16)0x1000) /* Word length */ -#define USART_CR1_UE ((u16)0x2000) /* USART Enable */ - - -/****************** Bit definition for USART_CR2 register *******************/ -#define USART_CR2_ADD ((u16)0x000F) /* Address of the USART node */ -#define USART_CR2_LBDL ((u16)0x0020) /* LIN Break Detection Length */ -#define USART_CR2_LBDIE ((u16)0x0040) /* LIN Break Detection Interrupt Enable */ -#define USART_CR2_LBCL ((u16)0x0100) /* Last Bit Clock pulse */ -#define USART_CR2_CPHA ((u16)0x0200) /* Clock Phase */ -#define USART_CR2_CPOL ((u16)0x0400) /* Clock Polarity */ -#define USART_CR2_CLKEN ((u16)0x0800) /* Clock Enable */ - -#define USART_CR2_STOP ((u16)0x3000) /* STOP[1:0] bits (STOP bits) */ -#define USART_CR2_STOP_0 ((u16)0x1000) /* Bit 0 */ -#define USART_CR2_STOP_1 ((u16)0x2000) /* Bit 1 */ - -#define USART_CR2_LINEN ((u16)0x4000) /* LIN mode enable */ - - -/****************** Bit definition for USART_CR3 register *******************/ -#define USART_CR3_EIE ((u16)0x0001) /* Error Interrupt Enable */ -#define USART_CR3_IREN ((u16)0x0002) /* IrDA mode Enable */ -#define USART_CR3_IRLP ((u16)0x0004) /* IrDA Low-Power */ -#define USART_CR3_HDSEL ((u16)0x0008) /* Half-Duplex Selection */ -#define USART_CR3_NACK ((u16)0x0010) /* Smartcard NACK enable */ -#define USART_CR3_SCEN ((u16)0x0020) /* Smartcard mode enable */ -#define USART_CR3_DMAR ((u16)0x0040) /* DMA Enable Receiver */ -#define USART_CR3_DMAT ((u16)0x0080) /* DMA Enable Transmitter */ -#define USART_CR3_RTSE ((u16)0x0100) /* RTS Enable */ -#define USART_CR3_CTSE ((u16)0x0200) /* CTS Enable */ -#define USART_CR3_CTSIE ((u16)0x0400) /* CTS Interrupt Enable */ - - -/****************** Bit definition for USART_GTPR register ******************/ -#define USART_GTPR_PSC ((u16)0x00FF) /* PSC[7:0] bits (Prescaler value) */ -#define USART_GTPR_PSC_0 ((u16)0x0001) /* Bit 0 */ -#define USART_GTPR_PSC_1 ((u16)0x0002) /* Bit 1 */ -#define USART_GTPR_PSC_2 ((u16)0x0004) /* Bit 2 */ -#define USART_GTPR_PSC_3 ((u16)0x0008) /* Bit 3 */ -#define USART_GTPR_PSC_4 ((u16)0x0010) /* Bit 4 */ -#define USART_GTPR_PSC_5 ((u16)0x0020) /* Bit 5 */ -#define USART_GTPR_PSC_6 ((u16)0x0040) /* Bit 6 */ -#define USART_GTPR_PSC_7 ((u16)0x0080) /* Bit 7 */ - -#define USART_GTPR_GT ((u16)0xFF00) /* Guard time value */ - - - -/******************************************************************************/ -/* */ -/* Debug MCU */ -/* */ -/******************************************************************************/ - -/**************** Bit definition for DBGMCU_IDCODE register *****************/ -#define DBGMCU_IDCODE_DEV_ID ((u32)0x00000FFF) /* Device Identifier */ - -#define DBGMCU_IDCODE_REV_ID ((u32)0xFFFF0000) /* REV_ID[15:0] bits (Revision Identifier) */ -#define DBGMCU_IDCODE_REV_ID_0 ((u32)0x00010000) /* Bit 0 */ -#define DBGMCU_IDCODE_REV_ID_1 ((u32)0x00020000) /* Bit 1 */ -#define DBGMCU_IDCODE_REV_ID_2 ((u32)0x00040000) /* Bit 2 */ -#define DBGMCU_IDCODE_REV_ID_3 ((u32)0x00080000) /* Bit 3 */ -#define DBGMCU_IDCODE_REV_ID_4 ((u32)0x00100000) /* Bit 4 */ -#define DBGMCU_IDCODE_REV_ID_5 ((u32)0x00200000) /* Bit 5 */ -#define DBGMCU_IDCODE_REV_ID_6 ((u32)0x00400000) /* Bit 6 */ -#define DBGMCU_IDCODE_REV_ID_7 ((u32)0x00800000) /* Bit 7 */ -#define DBGMCU_IDCODE_REV_ID_8 ((u32)0x01000000) /* Bit 8 */ -#define DBGMCU_IDCODE_REV_ID_9 ((u32)0x02000000) /* Bit 9 */ -#define DBGMCU_IDCODE_REV_ID_10 ((u32)0x04000000) /* Bit 10 */ -#define DBGMCU_IDCODE_REV_ID_11 ((u32)0x08000000) /* Bit 11 */ -#define DBGMCU_IDCODE_REV_ID_12 ((u32)0x10000000) /* Bit 12 */ -#define DBGMCU_IDCODE_REV_ID_13 ((u32)0x20000000) /* Bit 13 */ -#define DBGMCU_IDCODE_REV_ID_14 ((u32)0x40000000) /* Bit 14 */ -#define DBGMCU_IDCODE_REV_ID_15 ((u32)0x80000000) /* Bit 15 */ - - -/****************** Bit definition for DBGMCU_CR register *******************/ -#define DBGMCU_CR_DBG_SLEEP ((u32)0x00000001) /* Debug Sleep Mode */ -#define DBGMCU_CR_DBG_STOP ((u32)0x00000002) /* Debug Stop Mode */ -#define DBGMCU_CR_DBG_STANDBY ((u32)0x00000004) /* Debug Standby mode */ -#define DBGMCU_CR_TRACE_IOEN ((u32)0x00000020) /* Trace Pin Assignment Control */ - -#define DBGMCU_CR_TRACE_MODE ((u32)0x000000C0) /* TRACE_MODE[1:0] bits (Trace Pin Assignment Control) */ -#define DBGMCU_CR_TRACE_MODE_0 ((u32)0x00000040) /* Bit 0 */ -#define DBGMCU_CR_TRACE_MODE_1 ((u32)0x00000080) /* Bit 1 */ - -#define DBGMCU_CR_DBG_IWDG_STOP ((u32)0x00000100) /* Debug Independent Watchdog stopped when Core is halted */ -#define DBGMCU_CR_DBG_WWDG_STOP ((u32)0x00000200) /* Debug Window Watchdog stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM1_STOP ((u32)0x00000400) /* TIM1 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM2_STOP ((u32)0x00000800) /* TIM2 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM3_STOP ((u32)0x00001000) /* TIM3 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM4_STOP ((u32)0x00002000) /* TIM4 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_CAN_STOP ((u32)0x00004000) /* Debug CAN stopped when Core is halted */ -#define DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT ((u32)0x00008000) /* SMBUS timeout mode stopped when Core is halted */ -#define DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT ((u32)0x00010000) /* SMBUS timeout mode stopped when Core is halted */ -#define DBGMCU_CR_DBG_TIM5_STOP ((u32)0x00020000) /* TIM5 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM6_STOP ((u32)0x00040000) /* TIM6 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM7_STOP ((u32)0x00080000) /* TIM7 counter stopped when core is halted */ -#define DBGMCU_CR_DBG_TIM8_STOP ((u32)0x00100000) /* TIM8 counter stopped when core is halted */ - - - -/******************************************************************************/ -/* */ -/* FLASH and Option Bytes Registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for FLASH_ACR register ******************/ -#define FLASH_ACR_LATENCY ((u8)0x07) /* LATENCY[2:0] bits (Latency) */ -#define FLASH_ACR_LATENCY_0 ((u8)0x01) /* Bit 0 */ -#define FLASH_ACR_LATENCY_1 ((u8)0x02) /* Bit 1 */ -#define FLASH_ACR_LATENCY_2 ((u8)0x04) /* Bit 2 */ - -#define FLASH_ACR_HLFCYA ((u8)0x08) /* Flash Half Cycle Access Enable */ -#define FLASH_ACR_PRFTBE ((u8)0x10) /* Prefetch Buffer Enable */ -#define FLASH_ACR_PRFTBS ((u8)0x20) /* Prefetch Buffer Status */ - - -/****************** Bit definition for FLASH_KEYR register ******************/ -#define FLASH_KEYR_FKEYR ((u32)0xFFFFFFFF) /* FPEC Key */ - - -/***************** Bit definition for FLASH_OPTKEYR register ****************/ -#define FLASH_OPTKEYR_OPTKEYR ((u32)0xFFFFFFFF) /* Option Byte Key */ - - -/****************** Bit definition for FLASH_SR register *******************/ -#define FLASH_SR_BSY ((u8)0x01) /* Busy */ -#define FLASH_SR_PGERR ((u8)0x04) /* Programming Error */ -#define FLASH_SR_WRPRTERR ((u8)0x10) /* Write Protection Error */ -#define FLASH_SR_EOP ((u8)0x20) /* End of operation */ - - -/******************* Bit definition for FLASH_CR register *******************/ -#define FLASH_CR_PG ((u16)0x0001) /* Programming */ -#define FLASH_CR_PER ((u16)0x0002) /* Page Erase */ -#define FLASH_CR_MER ((u16)0x0004) /* Mass Erase */ -#define FLASH_CR_OPTPG ((u16)0x0010) /* Option Byte Programming */ -#define FLASH_CR_OPTER ((u16)0x0020) /* Option Byte Erase */ -#define FLASH_CR_STRT ((u16)0x0040) /* Start */ -#define FLASH_CR_LOCK ((u16)0x0080) /* Lock */ -#define FLASH_CR_OPTWRE ((u16)0x0200) /* Option Bytes Write Enable */ -#define FLASH_CR_ERRIE ((u16)0x0400) /* Error Interrupt Enable */ -#define FLASH_CR_EOPIE ((u16)0x1000) /* End of operation interrupt enable */ - - -/******************* Bit definition for FLASH_AR register *******************/ -#define FLASH_AR_FAR ((u32)0xFFFFFFFF) /* Flash Address */ - - -/****************** Bit definition for FLASH_OBR register *******************/ -#define FLASH_OBR_OPTERR ((u16)0x0001) /* Option Byte Error */ -#define FLASH_OBR_RDPRT ((u16)0x0002) /* Read protection */ - -#define FLASH_OBR_USER ((u16)0x03FC) /* User Option Bytes */ -#define FLASH_OBR_WDG_SW ((u16)0x0004) /* WDG_SW */ -#define FLASH_OBR_nRST_STOP ((u16)0x0008) /* nRST_STOP */ -#define FLASH_OBR_nRST_STDBY ((u16)0x0010) /* nRST_STDBY */ -#define FLASH_OBR_Notused ((u16)0x03E0) /* Not used */ - - -/****************** Bit definition for FLASH_WRPR register ******************/ -#define FLASH_WRPR_WRP ((u32)0xFFFFFFFF) /* Write Protect */ - - -/*----------------------------------------------------------------------------*/ - - -/****************** Bit definition for FLASH_RDP register *******************/ -#define FLASH_RDP_RDP ((u32)0x000000FF) /* Read protection option byte */ -#define FLASH_RDP_nRDP ((u32)0x0000FF00) /* Read protection complemented option byte */ - - -/****************** Bit definition for FLASH_USER register ******************/ -#define FLASH_USER_USER ((u32)0x00FF0000) /* User option byte */ -#define FLASH_USER_nUSER ((u32)0xFF000000) /* User complemented option byte */ - - -/****************** Bit definition for FLASH_Data0 register *****************/ -#define FLASH_Data0_Data0 ((u32)0x000000FF) /* User data storage option byte */ -#define FLASH_Data0_nData0 ((u32)0x0000FF00) /* User data storage complemented option byte */ - - -/****************** Bit definition for FLASH_Data1 register *****************/ -#define FLASH_Data1_Data1 ((u32)0x00FF0000) /* User data storage option byte */ -#define FLASH_Data1_nData1 ((u32)0xFF000000) /* User data storage complemented option byte */ - - -/****************** Bit definition for FLASH_WRP0 register ******************/ -#define FLASH_WRP0_WRP0 ((u32)0x000000FF) /* Flash memory write protection option bytes */ -#define FLASH_WRP0_nWRP0 ((u32)0x0000FF00) /* Flash memory write protection complemented option bytes */ - - -/****************** Bit definition for FLASH_WRP1 register ******************/ -#define FLASH_WRP1_WRP1 ((u32)0x00FF0000) /* Flash memory write protection option bytes */ -#define FLASH_WRP1_nWRP1 ((u32)0xFF000000) /* Flash memory write protection complemented option bytes */ - - -/****************** Bit definition for FLASH_WRP2 register ******************/ -#define FLASH_WRP2_WRP2 ((u32)0x000000FF) /* Flash memory write protection option bytes */ -#define FLASH_WRP2_nWRP2 ((u32)0x0000FF00) /* Flash memory write protection complemented option bytes */ - - -/****************** Bit definition for FLASH_WRP3 register ******************/ -#define FLASH_WRP3_WRP3 ((u32)0x00FF0000) /* Flash memory write protection option bytes */ -#define FLASH_WRP3_nWRP3 ((u32)0xFF000000) /* Flash memory write protection complemented option bytes */ - - -/* Exported macro ------------------------------------------------------------*/ -#define SET_BIT(REG, BIT) ((REG) |= (BIT)) - -#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) - -#define READ_BIT(REG, BIT) ((REG) & (BIT)) - -#define CLEAR_REG(REG) ((REG) = 0x0) - -#define WRITE_REG(REG, VAL) ((REG) = VAL) - -#define READ_REG(REG) ((REG)) - -#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~CLEARMASK)) | (SETMASK))) - -/* Exported functions ------------------------------------------------------- */ - -#endif /* __STM32F10x_MAP_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_nvic.h b/bsp/stm32/library/inc/stm32f10x_nvic.h deleted file mode 100644 index 5a3ce7ef1..000000000 --- a/bsp/stm32/library/inc/stm32f10x_nvic.h +++ /dev/null @@ -1,287 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_nvic.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* NVIC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_NVIC_H -#define __STM32F10x_NVIC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* NVIC Init Structure definition */ -typedef struct -{ - u8 NVIC_IRQChannel; - u8 NVIC_IRQChannelPreemptionPriority; - u8 NVIC_IRQChannelSubPriority; - FunctionalState NVIC_IRQChannelCmd; -} NVIC_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* IRQ Channels --------------------------------------------------------------*/ -#define WWDG_IRQChannel ((u8)0x00) /* Window WatchDog Interrupt */ -#define PVD_IRQChannel ((u8)0x01) /* PVD through EXTI Line detection Interrupt */ -#define TAMPER_IRQChannel ((u8)0x02) /* Tamper Interrupt */ -#define RTC_IRQChannel ((u8)0x03) /* RTC global Interrupt */ -#define FLASH_IRQChannel ((u8)0x04) /* FLASH global Interrupt */ -#define RCC_IRQChannel ((u8)0x05) /* RCC global Interrupt */ -#define EXTI0_IRQChannel ((u8)0x06) /* EXTI Line0 Interrupt */ -#define EXTI1_IRQChannel ((u8)0x07) /* EXTI Line1 Interrupt */ -#define EXTI2_IRQChannel ((u8)0x08) /* EXTI Line2 Interrupt */ -#define EXTI3_IRQChannel ((u8)0x09) /* EXTI Line3 Interrupt */ -#define EXTI4_IRQChannel ((u8)0x0A) /* EXTI Line4 Interrupt */ -#define DMA1_Channel1_IRQChannel ((u8)0x0B) /* DMA1 Channel 1 global Interrupt */ -#define DMA1_Channel2_IRQChannel ((u8)0x0C) /* DMA1 Channel 2 global Interrupt */ -#define DMA1_Channel3_IRQChannel ((u8)0x0D) /* DMA1 Channel 3 global Interrupt */ -#define DMA1_Channel4_IRQChannel ((u8)0x0E) /* DMA1 Channel 4 global Interrupt */ -#define DMA1_Channel5_IRQChannel ((u8)0x0F) /* DMA1 Channel 5 global Interrupt */ -#define DMA1_Channel6_IRQChannel ((u8)0x10) /* DMA1 Channel 6 global Interrupt */ -#define DMA1_Channel7_IRQChannel ((u8)0x11) /* DMA1 Channel 7 global Interrupt */ -#define ADC1_2_IRQChannel ((u8)0x12) /* ADC1 et ADC2 global Interrupt */ -#define USB_HP_CAN_TX_IRQChannel ((u8)0x13) /* USB High Priority or CAN TX Interrupts */ -#define USB_LP_CAN_RX0_IRQChannel ((u8)0x14) /* USB Low Priority or CAN RX0 Interrupts */ -#define CAN_RX1_IRQChannel ((u8)0x15) /* CAN RX1 Interrupt */ -#define CAN_SCE_IRQChannel ((u8)0x16) /* CAN SCE Interrupt */ -#define EXTI9_5_IRQChannel ((u8)0x17) /* External Line[9:5] Interrupts */ -#define TIM1_BRK_IRQChannel ((u8)0x18) /* TIM1 Break Interrupt */ -#define TIM1_UP_IRQChannel ((u8)0x19) /* TIM1 Update Interrupt */ -#define TIM1_TRG_COM_IRQChannel ((u8)0x1A) /* TIM1 Trigger and Commutation Interrupt */ -#define TIM1_CC_IRQChannel ((u8)0x1B) /* TIM1 Capture Compare Interrupt */ -#define TIM2_IRQChannel ((u8)0x1C) /* TIM2 global Interrupt */ -#define TIM3_IRQChannel ((u8)0x1D) /* TIM3 global Interrupt */ -#define TIM4_IRQChannel ((u8)0x1E) /* TIM4 global Interrupt */ -#define I2C1_EV_IRQChannel ((u8)0x1F) /* I2C1 Event Interrupt */ -#define I2C1_ER_IRQChannel ((u8)0x20) /* I2C1 Error Interrupt */ -#define I2C2_EV_IRQChannel ((u8)0x21) /* I2C2 Event Interrupt */ -#define I2C2_ER_IRQChannel ((u8)0x22) /* I2C2 Error Interrupt */ -#define SPI1_IRQChannel ((u8)0x23) /* SPI1 global Interrupt */ -#define SPI2_IRQChannel ((u8)0x24) /* SPI2 global Interrupt */ -#define USART1_IRQChannel ((u8)0x25) /* USART1 global Interrupt */ -#define USART2_IRQChannel ((u8)0x26) /* USART2 global Interrupt */ -#define USART3_IRQChannel ((u8)0x27) /* USART3 global Interrupt */ -#define EXTI15_10_IRQChannel ((u8)0x28) /* External Line[15:10] Interrupts */ -#define RTCAlarm_IRQChannel ((u8)0x29) /* RTC Alarm through EXTI Line Interrupt */ -#define USBWakeUp_IRQChannel ((u8)0x2A) /* USB WakeUp from suspend through EXTI Line Interrupt */ -#define TIM8_BRK_IRQChannel ((u8)0x2B) /* TIM8 Break Interrupt */ -#define TIM8_UP_IRQChannel ((u8)0x2C) /* TIM8 Update Interrupt */ -#define TIM8_TRG_COM_IRQChannel ((u8)0x2D) /* TIM8 Trigger and Commutation Interrupt */ -#define TIM8_CC_IRQChannel ((u8)0x2E) /* TIM8 Capture Compare Interrupt */ -#define ADC3_IRQChannel ((u8)0x2F) /* ADC3 global Interrupt */ -#define FSMC_IRQChannel ((u8)0x30) /* FSMC global Interrupt */ -#define SDIO_IRQChannel ((u8)0x31) /* SDIO global Interrupt */ -#define TIM5_IRQChannel ((u8)0x32) /* TIM5 global Interrupt */ -#define SPI3_IRQChannel ((u8)0x33) /* SPI3 global Interrupt */ -#define UART4_IRQChannel ((u8)0x34) /* UART4 global Interrupt */ -#define UART5_IRQChannel ((u8)0x35) /* UART5 global Interrupt */ -#define TIM6_IRQChannel ((u8)0x36) /* TIM6 global Interrupt */ -#define TIM7_IRQChannel ((u8)0x37) /* TIM7 global Interrupt */ -#define DMA2_Channel1_IRQChannel ((u8)0x38) /* DMA2 Channel 1 global Interrupt */ -#define DMA2_Channel2_IRQChannel ((u8)0x39) /* DMA2 Channel 2 global Interrupt */ -#define DMA2_Channel3_IRQChannel ((u8)0x3A) /* DMA2 Channel 3 global Interrupt */ -#define DMA2_Channel4_5_IRQChannel ((u8)0x3B) /* DMA2 Channel 4 and DMA2 Channel 5 global Interrupt */ - - -#define IS_NVIC_IRQ_CHANNEL(CHANNEL) (((CHANNEL) == WWDG_IRQChannel) || \ - ((CHANNEL) == PVD_IRQChannel) || \ - ((CHANNEL) == TAMPER_IRQChannel) || \ - ((CHANNEL) == RTC_IRQChannel) || \ - ((CHANNEL) == FLASH_IRQChannel) || \ - ((CHANNEL) == RCC_IRQChannel) || \ - ((CHANNEL) == EXTI0_IRQChannel) || \ - ((CHANNEL) == EXTI1_IRQChannel) || \ - ((CHANNEL) == EXTI2_IRQChannel) || \ - ((CHANNEL) == EXTI3_IRQChannel) || \ - ((CHANNEL) == EXTI4_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel1_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel2_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel3_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel4_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel5_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel6_IRQChannel) || \ - ((CHANNEL) == DMA1_Channel7_IRQChannel) || \ - ((CHANNEL) == ADC1_2_IRQChannel) || \ - ((CHANNEL) == USB_HP_CAN_TX_IRQChannel) || \ - ((CHANNEL) == USB_LP_CAN_RX0_IRQChannel) || \ - ((CHANNEL) == CAN_RX1_IRQChannel) || \ - ((CHANNEL) == CAN_SCE_IRQChannel) || \ - ((CHANNEL) == EXTI9_5_IRQChannel) || \ - ((CHANNEL) == TIM1_BRK_IRQChannel) || \ - ((CHANNEL) == TIM1_UP_IRQChannel) || \ - ((CHANNEL) == TIM1_TRG_COM_IRQChannel) || \ - ((CHANNEL) == TIM1_CC_IRQChannel) || \ - ((CHANNEL) == TIM2_IRQChannel) || \ - ((CHANNEL) == TIM3_IRQChannel) || \ - ((CHANNEL) == TIM4_IRQChannel) || \ - ((CHANNEL) == I2C1_EV_IRQChannel) || \ - ((CHANNEL) == I2C1_ER_IRQChannel) || \ - ((CHANNEL) == I2C2_EV_IRQChannel) || \ - ((CHANNEL) == I2C2_ER_IRQChannel) || \ - ((CHANNEL) == SPI1_IRQChannel) || \ - ((CHANNEL) == SPI2_IRQChannel) || \ - ((CHANNEL) == USART1_IRQChannel) || \ - ((CHANNEL) == USART2_IRQChannel) || \ - ((CHANNEL) == USART3_IRQChannel) || \ - ((CHANNEL) == EXTI15_10_IRQChannel) || \ - ((CHANNEL) == RTCAlarm_IRQChannel) || \ - ((CHANNEL) == USBWakeUp_IRQChannel) || \ - ((CHANNEL) == TIM8_BRK_IRQChannel) || \ - ((CHANNEL) == TIM8_UP_IRQChannel) || \ - ((CHANNEL) == TIM8_TRG_COM_IRQChannel) || \ - ((CHANNEL) == TIM8_CC_IRQChannel) || \ - ((CHANNEL) == ADC3_IRQChannel) || \ - ((CHANNEL) == FSMC_IRQChannel) || \ - ((CHANNEL) == SDIO_IRQChannel) || \ - ((CHANNEL) == TIM5_IRQChannel) || \ - ((CHANNEL) == SPI3_IRQChannel) || \ - ((CHANNEL) == UART4_IRQChannel) || \ - ((CHANNEL) == UART5_IRQChannel) || \ - ((CHANNEL) == TIM6_IRQChannel) || \ - ((CHANNEL) == TIM7_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel1_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel2_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel3_IRQChannel) || \ - ((CHANNEL) == DMA2_Channel4_5_IRQChannel)) - - -/* System Handlers -----------------------------------------------------------*/ -#define SystemHandler_NMI ((u32)0x00001F) /* NMI Handler */ -#define SystemHandler_HardFault ((u32)0x000000) /* Hard Fault Handler */ -#define SystemHandler_MemoryManage ((u32)0x043430) /* Memory Manage Handler */ -#define SystemHandler_BusFault ((u32)0x547931) /* Bus Fault Handler */ -#define SystemHandler_UsageFault ((u32)0x24C232) /* Usage Fault Handler */ -#define SystemHandler_SVCall ((u32)0x01FF40) /* SVCall Handler */ -#define SystemHandler_DebugMonitor ((u32)0x0A0080) /* Debug Monitor Handler */ -#define SystemHandler_PSV ((u32)0x02829C) /* PSV Handler */ -#define SystemHandler_SysTick ((u32)0x02C39A) /* SysTick Handler */ - -#define IS_CONFIG_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault)) - -#define IS_PRIORITY_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault) || \ - ((HANDLER) == SystemHandler_SVCall) || \ - ((HANDLER) == SystemHandler_DebugMonitor) || \ - ((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_GET_PENDING_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_SVCall)) - -#define IS_SET_PENDING_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_NMI) || \ - ((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_CLEAR_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_GET_ACTIVE_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault) || \ - ((HANDLER) == SystemHandler_SVCall) || \ - ((HANDLER) == SystemHandler_DebugMonitor) || \ - ((HANDLER) == SystemHandler_PSV) || \ - ((HANDLER) == SystemHandler_SysTick)) - -#define IS_FAULT_SOURCE_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_HardFault) || \ - ((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault) || \ - ((HANDLER) == SystemHandler_UsageFault) || \ - ((HANDLER) == SystemHandler_DebugMonitor)) - -#define IS_FAULT_ADDRESS_SYSTEM_HANDLER(HANDLER) (((HANDLER) == SystemHandler_MemoryManage) || \ - ((HANDLER) == SystemHandler_BusFault)) - - -/* Vector Table Base ---------------------------------------------------------*/ -#define NVIC_VectTab_RAM ((u32)0x20000000) -#define NVIC_VectTab_FLASH ((u32)0x08000000) - -#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ - ((VECTTAB) == NVIC_VectTab_FLASH)) - -/* System Low Power ----------------------------------------------------------*/ -#define NVIC_LP_SEVONPEND ((u8)0x10) -#define NVIC_LP_SLEEPDEEP ((u8)0x04) -#define NVIC_LP_SLEEPONEXIT ((u8)0x02) - -#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ - ((LP) == NVIC_LP_SLEEPDEEP) || \ - ((LP) == NVIC_LP_SLEEPONEXIT)) - -/* Preemption Priority Group -------------------------------------------------*/ -#define NVIC_PriorityGroup_0 ((u32)0x700) /* 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PriorityGroup_1 ((u32)0x600) /* 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PriorityGroup_2 ((u32)0x500) /* 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PriorityGroup_3 ((u32)0x400) /* 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PriorityGroup_4 ((u32)0x300) /* 4 bits for pre-emption priority - 0 bits for subpriority */ - -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ - ((GROUP) == NVIC_PriorityGroup_1) || \ - ((GROUP) == NVIC_PriorityGroup_2) || \ - ((GROUP) == NVIC_PriorityGroup_3) || \ - ((GROUP) == NVIC_PriorityGroup_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) -#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x0007FFFF) -#define IS_NVIC_BASE_PRI(PRI) ((PRI) < 0x10) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void NVIC_DeInit(void); -void NVIC_SCBDeInit(void); -void NVIC_PriorityGroupConfig(u32 NVIC_PriorityGroup); -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_StructInit(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_SETPRIMASK(void); -void NVIC_RESETPRIMASK(void); -void NVIC_SETFAULTMASK(void); -void NVIC_RESETFAULTMASK(void); -void NVIC_BASEPRICONFIG(u32 NewPriority); -u32 NVIC_GetBASEPRI(void); -u16 NVIC_GetCurrentPendingIRQChannel(void); -ITStatus NVIC_GetIRQChannelPendingBitStatus(u8 NVIC_IRQChannel); -void NVIC_SetIRQChannelPendingBit(u8 NVIC_IRQChannel); -void NVIC_ClearIRQChannelPendingBit(u8 NVIC_IRQChannel); -u16 NVIC_GetCurrentActiveHandler(void); -ITStatus NVIC_GetIRQChannelActiveBitStatus(u8 NVIC_IRQChannel); -u32 NVIC_GetCPUID(void); -void NVIC_SetVectorTable(u32 NVIC_VectTab, u32 Offset); -void NVIC_GenerateSystemReset(void); -void NVIC_GenerateCoreReset(void); -void NVIC_SystemLPConfig(u8 LowPowerMode, FunctionalState NewState); -void NVIC_SystemHandlerConfig(u32 SystemHandler, FunctionalState NewState); -void NVIC_SystemHandlerPriorityConfig(u32 SystemHandler, u8 SystemHandlerPreemptionPriority, - u8 SystemHandlerSubPriority); -ITStatus NVIC_GetSystemHandlerPendingBitStatus(u32 SystemHandler); -void NVIC_SetSystemHandlerPendingBit(u32 SystemHandler); -void NVIC_ClearSystemHandlerPendingBit(u32 SystemHandler); -ITStatus NVIC_GetSystemHandlerActiveBitStatus(u32 SystemHandler); -u32 NVIC_GetFaultHandlerSources(u32 SystemHandler); -u32 NVIC_GetFaultAddress(u32 SystemHandler); - -#endif /* __STM32F10x_NVIC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_pwr.h b/bsp/stm32/library/inc/stm32f10x_pwr.h deleted file mode 100644 index ee94a17ce..000000000 --- a/bsp/stm32/library/inc/stm32f10x_pwr.h +++ /dev/null @@ -1,77 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_pwr.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* PWR firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_PWR_H -#define __STM32F10x_PWR_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* PVD detection level */ -#define PWR_PVDLevel_2V2 ((u32)0x00000000) -#define PWR_PVDLevel_2V3 ((u32)0x00000020) -#define PWR_PVDLevel_2V4 ((u32)0x00000040) -#define PWR_PVDLevel_2V5 ((u32)0x00000060) -#define PWR_PVDLevel_2V6 ((u32)0x00000080) -#define PWR_PVDLevel_2V7 ((u32)0x000000A0) -#define PWR_PVDLevel_2V8 ((u32)0x000000C0) -#define PWR_PVDLevel_2V9 ((u32)0x000000E0) - -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ - ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ - ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ - ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) - -/* Regulator state is STOP mode */ -#define PWR_Regulator_ON ((u32)0x00000000) -#define PWR_Regulator_LowPower ((u32)0x00000001) - -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ - ((REGULATOR) == PWR_Regulator_LowPower)) - -/* STOP mode entry */ -#define PWR_STOPEntry_WFI ((u8)0x01) -#define PWR_STOPEntry_WFE ((u8)0x02) - -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) - -/* PWR Flag */ -#define PWR_FLAG_WU ((u32)0x00000001) -#define PWR_FLAG_SB ((u32)0x00000002) -#define PWR_FLAG_PVDO ((u32)0x00000004) - -#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ - ((FLAG) == PWR_FLAG_PVDO)) -#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void PWR_DeInit(void); -void PWR_BackupAccessCmd(FunctionalState NewState); -void PWR_PVDCmd(FunctionalState NewState); -void PWR_PVDLevelConfig(u32 PWR_PVDLevel); -void PWR_WakeUpPinCmd(FunctionalState NewState); -void PWR_EnterSTOPMode(u32 PWR_Regulator, u8 PWR_STOPEntry); -void PWR_EnterSTANDBYMode(void); -FlagStatus PWR_GetFlagStatus(u32 PWR_FLAG); -void PWR_ClearFlag(u32 PWR_FLAG); - -#endif /* __STM32F10x_PWR_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_rcc.h b/bsp/stm32/library/inc/stm32f10x_rcc.h deleted file mode 100644 index a256bc914..000000000 --- a/bsp/stm32/library/inc/stm32f10x_rcc.h +++ /dev/null @@ -1,288 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rcc.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* RCC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RCC_H -#define __STM32F10x_RCC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -typedef struct -{ - u32 SYSCLK_Frequency; - u32 HCLK_Frequency; - u32 PCLK1_Frequency; - u32 PCLK2_Frequency; - u32 ADCCLK_Frequency; -}RCC_ClocksTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* HSE configuration */ -#define RCC_HSE_OFF ((u32)0x00000000) -#define RCC_HSE_ON ((u32)0x00010000) -#define RCC_HSE_Bypass ((u32)0x00040000) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_Bypass)) - -/* PLL entry clock source */ -#define RCC_PLLSource_HSI_Div2 ((u32)0x00000000) -#define RCC_PLLSource_HSE_Div1 ((u32)0x00010000) -#define RCC_PLLSource_HSE_Div2 ((u32)0x00030000) - -#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div2)) - -/* PLL multiplication factor */ -#define RCC_PLLMul_2 ((u32)0x00000000) -#define RCC_PLLMul_3 ((u32)0x00040000) -#define RCC_PLLMul_4 ((u32)0x00080000) -#define RCC_PLLMul_5 ((u32)0x000C0000) -#define RCC_PLLMul_6 ((u32)0x00100000) -#define RCC_PLLMul_7 ((u32)0x00140000) -#define RCC_PLLMul_8 ((u32)0x00180000) -#define RCC_PLLMul_9 ((u32)0x001C0000) -#define RCC_PLLMul_10 ((u32)0x00200000) -#define RCC_PLLMul_11 ((u32)0x00240000) -#define RCC_PLLMul_12 ((u32)0x00280000) -#define RCC_PLLMul_13 ((u32)0x002C0000) -#define RCC_PLLMul_14 ((u32)0x00300000) -#define RCC_PLLMul_15 ((u32)0x00340000) -#define RCC_PLLMul_16 ((u32)0x00380000) - -#define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ - ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ - ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ - ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ - ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ - ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ - ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ - ((MUL) == RCC_PLLMul_16)) - -/* System clock source */ -#define RCC_SYSCLKSource_HSI ((u32)0x00000000) -#define RCC_SYSCLKSource_HSE ((u32)0x00000001) -#define RCC_SYSCLKSource_PLLCLK ((u32)0x00000002) - -#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ - ((SOURCE) == RCC_SYSCLKSource_HSE) || \ - ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) - -/* AHB clock source */ -#define RCC_SYSCLK_Div1 ((u32)0x00000000) -#define RCC_SYSCLK_Div2 ((u32)0x00000080) -#define RCC_SYSCLK_Div4 ((u32)0x00000090) -#define RCC_SYSCLK_Div8 ((u32)0x000000A0) -#define RCC_SYSCLK_Div16 ((u32)0x000000B0) -#define RCC_SYSCLK_Div64 ((u32)0x000000C0) -#define RCC_SYSCLK_Div128 ((u32)0x000000D0) -#define RCC_SYSCLK_Div256 ((u32)0x000000E0) -#define RCC_SYSCLK_Div512 ((u32)0x000000F0) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ - ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ - ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ - ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ - ((HCLK) == RCC_SYSCLK_Div512)) - -/* APB1/APB2 clock source */ -#define RCC_HCLK_Div1 ((u32)0x00000000) -#define RCC_HCLK_Div2 ((u32)0x00000400) -#define RCC_HCLK_Div4 ((u32)0x00000500) -#define RCC_HCLK_Div8 ((u32)0x00000600) -#define RCC_HCLK_Div16 ((u32)0x00000700) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ - ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ - ((PCLK) == RCC_HCLK_Div16)) - -/* RCC Interrupt source */ -#define RCC_IT_LSIRDY ((u8)0x01) -#define RCC_IT_LSERDY ((u8)0x02) -#define RCC_IT_HSIRDY ((u8)0x04) -#define RCC_IT_HSERDY ((u8)0x08) -#define RCC_IT_PLLRDY ((u8)0x10) -#define RCC_IT_CSS ((u8)0x80) - -#define IS_RCC_IT(IT) ((((IT) & (u8)0xE0) == 0x00) && ((IT) != 0x00)) -#define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) -#define IS_RCC_CLEAR_IT(IT) ((((IT) & (u8)0x60) == 0x00) && ((IT) != 0x00)) - -/* USB clock source */ -#define RCC_USBCLKSource_PLLCLK_1Div5 ((u8)0x00) -#define RCC_USBCLKSource_PLLCLK_Div1 ((u8)0x01) - -#define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ - ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) - -/* ADC clock source */ -#define RCC_PCLK2_Div2 ((u32)0x00000000) -#define RCC_PCLK2_Div4 ((u32)0x00004000) -#define RCC_PCLK2_Div6 ((u32)0x00008000) -#define RCC_PCLK2_Div8 ((u32)0x0000C000) - -#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ - ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) - -/* LSE configuration */ -#define RCC_LSE_OFF ((u8)0x00) -#define RCC_LSE_ON ((u8)0x01) -#define RCC_LSE_Bypass ((u8)0x04) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_Bypass)) - -/* RTC clock source */ -#define RCC_RTCCLKSource_LSE ((u32)0x00000100) -#define RCC_RTCCLKSource_LSI ((u32)0x00000200) -#define RCC_RTCCLKSource_HSE_Div128 ((u32)0x00000300) - -#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ - ((SOURCE) == RCC_RTCCLKSource_LSI) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) - -/* AHB peripheral */ -#define RCC_AHBPeriph_DMA1 ((u32)0x00000001) -#define RCC_AHBPeriph_DMA2 ((u32)0x00000002) -#define RCC_AHBPeriph_SRAM ((u32)0x00000004) -#define RCC_AHBPeriph_FLITF ((u32)0x00000010) -#define RCC_AHBPeriph_CRC ((u32)0x00000040) -#define RCC_AHBPeriph_FSMC ((u32)0x00000100) -#define RCC_AHBPeriph_SDIO ((u32)0x00000400) - -#define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) - -/* APB2 peripheral */ -#define RCC_APB2Periph_AFIO ((u32)0x00000001) -#define RCC_APB2Periph_GPIOA ((u32)0x00000004) -#define RCC_APB2Periph_GPIOB ((u32)0x00000008) -#define RCC_APB2Periph_GPIOC ((u32)0x00000010) -#define RCC_APB2Periph_GPIOD ((u32)0x00000020) -#define RCC_APB2Periph_GPIOE ((u32)0x00000040) -#define RCC_APB2Periph_GPIOF ((u32)0x00000080) -#define RCC_APB2Periph_GPIOG ((u32)0x00000100) -#define RCC_APB2Periph_ADC1 ((u32)0x00000200) -#define RCC_APB2Periph_ADC2 ((u32)0x00000400) -#define RCC_APB2Periph_TIM1 ((u32)0x00000800) -#define RCC_APB2Periph_SPI1 ((u32)0x00001000) -#define RCC_APB2Periph_TIM8 ((u32)0x00002000) -#define RCC_APB2Periph_USART1 ((u32)0x00004000) -#define RCC_APB2Periph_ADC3 ((u32)0x00008000) -#define RCC_APB2Periph_ALL ((u32)0x0000FFFD) - -#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFF0002) == 0x00) && ((PERIPH) != 0x00)) - -/* APB1 peripheral */ -#define RCC_APB1Periph_TIM2 ((u32)0x00000001) -#define RCC_APB1Periph_TIM3 ((u32)0x00000002) -#define RCC_APB1Periph_TIM4 ((u32)0x00000004) -#define RCC_APB1Periph_TIM5 ((u32)0x00000008) -#define RCC_APB1Periph_TIM6 ((u32)0x00000010) -#define RCC_APB1Periph_TIM7 ((u32)0x00000020) -#define RCC_APB1Periph_WWDG ((u32)0x00000800) -#define RCC_APB1Periph_SPI2 ((u32)0x00004000) -#define RCC_APB1Periph_SPI3 ((u32)0x00008000) -#define RCC_APB1Periph_USART2 ((u32)0x00020000) -#define RCC_APB1Periph_USART3 ((u32)0x00040000) -#define RCC_APB1Periph_UART4 ((u32)0x00080000) -#define RCC_APB1Periph_UART5 ((u32)0x00100000) -#define RCC_APB1Periph_I2C1 ((u32)0x00200000) -#define RCC_APB1Periph_I2C2 ((u32)0x00400000) -#define RCC_APB1Periph_USB ((u32)0x00800000) -#define RCC_APB1Periph_CAN ((u32)0x02000000) -#define RCC_APB1Periph_BKP ((u32)0x08000000) -#define RCC_APB1Periph_PWR ((u32)0x10000000) -#define RCC_APB1Periph_DAC ((u32)0x20000000) -#define RCC_APB1Periph_ALL ((u32)0x3AFEC83F) - -#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0xC50137C0) == 0x00) && ((PERIPH) != 0x00)) - -/* Clock source to output on MCO pin */ -#define RCC_MCO_NoClock ((u8)0x00) -#define RCC_MCO_SYSCLK ((u8)0x04) -#define RCC_MCO_HSI ((u8)0x05) -#define RCC_MCO_HSE ((u8)0x06) -#define RCC_MCO_PLLCLK_Div2 ((u8)0x07) - -#define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ - ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ - ((MCO) == RCC_MCO_PLLCLK_Div2)) - -/* RCC Flag */ -#define RCC_FLAG_HSIRDY ((u8)0x21) -#define RCC_FLAG_HSERDY ((u8)0x31) -#define RCC_FLAG_PLLRDY ((u8)0x39) -#define RCC_FLAG_LSERDY ((u8)0x41) -#define RCC_FLAG_LSIRDY ((u8)0x61) -#define RCC_FLAG_PINRST ((u8)0x7A) -#define RCC_FLAG_PORRST ((u8)0x7B) -#define RCC_FLAG_SFTRST ((u8)0x7C) -#define RCC_FLAG_IWDGRST ((u8)0x7D) -#define RCC_FLAG_WWDGRST ((u8)0x7E) -#define RCC_FLAG_LPWRRST ((u8)0x7F) - -#define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ - ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ - ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ - ((FLAG) == RCC_FLAG_LPWRRST)) - -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void RCC_DeInit(void); -void RCC_HSEConfig(u32 RCC_HSE); -ErrorStatus RCC_WaitForHSEStartUp(void); -void RCC_AdjustHSICalibrationValue(u8 HSICalibrationValue); -void RCC_HSICmd(FunctionalState NewState); -void RCC_PLLConfig(u32 RCC_PLLSource, u32 RCC_PLLMul); -void RCC_PLLCmd(FunctionalState NewState); -void RCC_SYSCLKConfig(u32 RCC_SYSCLKSource); -u8 RCC_GetSYSCLKSource(void); -void RCC_HCLKConfig(u32 RCC_SYSCLK); -void RCC_PCLK1Config(u32 RCC_HCLK); -void RCC_PCLK2Config(u32 RCC_HCLK); -void RCC_ITConfig(u8 RCC_IT, FunctionalState NewState); -void RCC_USBCLKConfig(u32 RCC_USBCLKSource); -void RCC_ADCCLKConfig(u32 RCC_PCLK2); -void RCC_LSEConfig(u8 RCC_LSE); -void RCC_LSICmd(FunctionalState NewState); -void RCC_RTCCLKConfig(u32 RCC_RTCCLKSource); -void RCC_RTCCLKCmd(FunctionalState NewState); -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); -void RCC_AHBPeriphClockCmd(u32 RCC_AHBPeriph, FunctionalState NewState); -void RCC_APB2PeriphClockCmd(u32 RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphClockCmd(u32 RCC_APB1Periph, FunctionalState NewState); -void RCC_APB2PeriphResetCmd(u32 RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphResetCmd(u32 RCC_APB1Periph, FunctionalState NewState); -void RCC_BackupResetCmd(FunctionalState NewState); -void RCC_ClockSecuritySystemCmd(FunctionalState NewState); -void RCC_MCOConfig(u8 RCC_MCO); -FlagStatus RCC_GetFlagStatus(u8 RCC_FLAG); -void RCC_ClearFlag(void); -ITStatus RCC_GetITStatus(u8 RCC_IT); -void RCC_ClearITPendingBit(u8 RCC_IT); - -#endif /* __STM32F10x_RCC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_rtc.h b/bsp/stm32/library/inc/stm32f10x_rtc.h deleted file mode 100644 index 9cd84ace8..000000000 --- a/bsp/stm32/library/inc/stm32f10x_rtc.h +++ /dev/null @@ -1,70 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rtc.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* RTC firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RTC_H -#define __STM32F10x_RTC_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* RTC interrupts define -----------------------------------------------------*/ -#define RTC_IT_OW ((u16)0x0004) /* Overflow interrupt */ -#define RTC_IT_ALR ((u16)0x0002) /* Alarm interrupt */ -#define RTC_IT_SEC ((u16)0x0001) /* Second interrupt */ - -#define IS_RTC_IT(IT) ((((IT) & (u16)0xFFF8) == 0x00) && ((IT) != 0x00)) - -#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \ - ((IT) == RTC_IT_SEC)) - -/* RTC interrupts flags ------------------------------------------------------*/ -#define RTC_FLAG_RTOFF ((u16)0x0020) /* RTC Operation OFF flag */ -#define RTC_FLAG_RSF ((u16)0x0008) /* Registers Synchronized flag */ -#define RTC_FLAG_OW ((u16)0x0004) /* Overflow flag */ -#define RTC_FLAG_ALR ((u16)0x0002) /* Alarm flag */ -#define RTC_FLAG_SEC ((u16)0x0001) /* Second flag */ - -#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (u16)0xFFF0) == 0x00) && ((FLAG) != 0x00)) - -#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \ - ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \ - ((FLAG) == RTC_FLAG_SEC)) - -#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void RTC_ITConfig(u16 RTC_IT, FunctionalState NewState); -void RTC_EnterConfigMode(void); -void RTC_ExitConfigMode(void); -u32 RTC_GetCounter(void); -void RTC_SetCounter(u32 CounterValue); -void RTC_SetPrescaler(u32 PrescalerValue); -void RTC_SetAlarm(u32 AlarmValue); -u32 RTC_GetDivider(void); -void RTC_WaitForLastTask(void); -void RTC_WaitForSynchro(void); -FlagStatus RTC_GetFlagStatus(u16 RTC_FLAG); -void RTC_ClearFlag(u16 RTC_FLAG); -ITStatus RTC_GetITStatus(u16 RTC_IT); -void RTC_ClearITPendingBit(u16 RTC_IT); - -#endif /* __STM32F10x_RTC_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_sdio.h b/bsp/stm32/library/inc/stm32f10x_sdio.h deleted file mode 100644 index 5043049d2..000000000 --- a/bsp/stm32/library/inc/stm32f10x_sdio.h +++ /dev/null @@ -1,337 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_sdio.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* SDIO firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SDIO_H -#define __STM32F10x_SDIO_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -typedef struct -{ - u8 SDIO_ClockDiv; - u32 SDIO_ClockEdge; - u32 SDIO_ClockBypass; - u32 SDIO_ClockPowerSave; - u32 SDIO_BusWide; - u32 SDIO_HardwareFlowControl; -} SDIO_InitTypeDef; - -typedef struct -{ - u32 SDIO_Argument; - u32 SDIO_CmdIndex; - u32 SDIO_Response; - u32 SDIO_Wait; - u32 SDIO_CPSM; -} SDIO_CmdInitTypeDef; - -typedef struct -{ - u32 SDIO_DataTimeOut; - u32 SDIO_DataLength; - u32 SDIO_DataBlockSize; - u32 SDIO_TransferDir; - u32 SDIO_TransferMode; - u32 SDIO_DPSM; -} SDIO_DataInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -/* SDIO Clock Edge -----------------------------------------------------------*/ -#define SDIO_ClockEdge_Rising ((u32)0x00000000) -#define SDIO_ClockEdge_Falling ((u32)0x00002000) - -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ - ((EDGE) == SDIO_ClockEdge_Falling)) -/* SDIO Clock Bypass ----------------------------------------------------------*/ -#define SDIO_ClockBypass_Disable ((u32)0x00000000) -#define SDIO_ClockBypass_Enable ((u32)0x00000400) - -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ - ((BYPASS) == SDIO_ClockBypass_Enable)) - -/* SDIO Clock Power Save ----------------------------------------------------*/ -#define SDIO_ClockPowerSave_Disable ((u32)0x00000000) -#define SDIO_ClockPowerSave_Enable ((u32)0x00000200) - -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ - ((SAVE) == SDIO_ClockPowerSave_Enable)) - -/* SDIO Bus Wide -------------------------------------------------------------*/ -#define SDIO_BusWide_1b ((u32)0x00000000) -#define SDIO_BusWide_4b ((u32)0x00000800) -#define SDIO_BusWide_8b ((u32)0x00001000) - -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ - ((WIDE) == SDIO_BusWide_8b)) - -/* SDIO Hardware Flow Control -----------------------------------------------*/ -#define SDIO_HardwareFlowControl_Disable ((u32)0x00000000) -#define SDIO_HardwareFlowControl_Enable ((u32)0x00004000) - -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ - ((CONTROL) == SDIO_HardwareFlowControl_Enable)) - -/* SDIO Power State ----------------------------------------------------------*/ -#define SDIO_PowerState_OFF ((u32)0x00000000) -#define SDIO_PowerState_ON ((u32)0x00000003) - -#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) - -/* SDIO Interrupt soucres ----------------------------------------------------*/ -#define SDIO_IT_CCRCFAIL ((u32)0x00000001) -#define SDIO_IT_DCRCFAIL ((u32)0x00000002) -#define SDIO_IT_CTIMEOUT ((u32)0x00000004) -#define SDIO_IT_DTIMEOUT ((u32)0x00000008) -#define SDIO_IT_TXUNDERR ((u32)0x00000010) -#define SDIO_IT_RXOVERR ((u32)0x00000020) -#define SDIO_IT_CMDREND ((u32)0x00000040) -#define SDIO_IT_CMDSENT ((u32)0x00000080) -#define SDIO_IT_DATAEND ((u32)0x00000100) -#define SDIO_IT_STBITERR ((u32)0x00000200) -#define SDIO_IT_DBCKEND ((u32)0x00000400) -#define SDIO_IT_CMDACT ((u32)0x00000800) -#define SDIO_IT_TXACT ((u32)0x00001000) -#define SDIO_IT_RXACT ((u32)0x00002000) -#define SDIO_IT_TXFIFOHE ((u32)0x00004000) -#define SDIO_IT_RXFIFOHF ((u32)0x00008000) -#define SDIO_IT_TXFIFOF ((u32)0x00010000) -#define SDIO_IT_RXFIFOF ((u32)0x00020000) -#define SDIO_IT_TXFIFOE ((u32)0x00040000) -#define SDIO_IT_RXFIFOE ((u32)0x00080000) -#define SDIO_IT_TXDAVL ((u32)0x00100000) -#define SDIO_IT_RXDAVL ((u32)0x00200000) -#define SDIO_IT_SDIOIT ((u32)0x00400000) -#define SDIO_IT_CEATAEND ((u32)0x00800000) - -#define IS_SDIO_IT(IT) ((((IT) & (u32)0xFF000000) == 0x00) && ((IT) != (u32)0x00)) - -/* SDIO Command Index -------------------------------------------------------*/ -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) - -/* SDIO Response Type --------------------------------------------------------*/ -#define SDIO_Response_No ((u32)0x00000000) -#define SDIO_Response_Short ((u32)0x00000040) -#define SDIO_Response_Long ((u32)0x000000C0) - -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ - ((RESPONSE) == SDIO_Response_Short) || \ - ((RESPONSE) == SDIO_Response_Long)) - -/* SDIO Wait Interrupt State -------------------------------------------------*/ -#define SDIO_Wait_No ((u32)0x00000000) /* SDIO No Wait, TimeOut is enabled */ -#define SDIO_Wait_IT ((u32)0x00000100) /* SDIO Wait Interrupt Request */ -#define SDIO_Wait_Pend ((u32)0x00000200) /* SDIO Wait End of transfer */ - -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ - ((WAIT) == SDIO_Wait_Pend)) - -/* SDIO CPSM State -----------------------------------------------------------*/ -#define SDIO_CPSM_Disable ((u32)0x00000000) -#define SDIO_CPSM_Enable ((u32)0x00000400) - -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) - -/* SDIO Response Registers ---------------------------------------------------*/ -#define SDIO_RESP1 ((u32)0x00000000) -#define SDIO_RESP2 ((u32)0x00000004) -#define SDIO_RESP3 ((u32)0x00000008) -#define SDIO_RESP4 ((u32)0x0000000C) - -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) - -/* SDIO Data Length ----------------------------------------------------------*/ -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) - -/* SDIO Data Block Size ------------------------------------------------------*/ -#define SDIO_DataBlockSize_1b ((u32)0x00000000) -#define SDIO_DataBlockSize_2b ((u32)0x00000010) -#define SDIO_DataBlockSize_4b ((u32)0x00000020) -#define SDIO_DataBlockSize_8b ((u32)0x00000030) -#define SDIO_DataBlockSize_16b ((u32)0x00000040) -#define SDIO_DataBlockSize_32b ((u32)0x00000050) -#define SDIO_DataBlockSize_64b ((u32)0x00000060) -#define SDIO_DataBlockSize_128b ((u32)0x00000070) -#define SDIO_DataBlockSize_256b ((u32)0x00000080) -#define SDIO_DataBlockSize_512b ((u32)0x00000090) -#define SDIO_DataBlockSize_1024b ((u32)0x000000A0) -#define SDIO_DataBlockSize_2048b ((u32)0x000000B0) -#define SDIO_DataBlockSize_4096b ((u32)0x000000C0) -#define SDIO_DataBlockSize_8192b ((u32)0x000000D0) -#define SDIO_DataBlockSize_16384b ((u32)0x000000E0) - -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ - ((SIZE) == SDIO_DataBlockSize_2b) || \ - ((SIZE) == SDIO_DataBlockSize_4b) || \ - ((SIZE) == SDIO_DataBlockSize_8b) || \ - ((SIZE) == SDIO_DataBlockSize_16b) || \ - ((SIZE) == SDIO_DataBlockSize_32b) || \ - ((SIZE) == SDIO_DataBlockSize_64b) || \ - ((SIZE) == SDIO_DataBlockSize_128b) || \ - ((SIZE) == SDIO_DataBlockSize_256b) || \ - ((SIZE) == SDIO_DataBlockSize_512b) || \ - ((SIZE) == SDIO_DataBlockSize_1024b) || \ - ((SIZE) == SDIO_DataBlockSize_2048b) || \ - ((SIZE) == SDIO_DataBlockSize_4096b) || \ - ((SIZE) == SDIO_DataBlockSize_8192b) || \ - ((SIZE) == SDIO_DataBlockSize_16384b)) - -/* SDIO Transfer Direction ---------------------------------------------------*/ -#define SDIO_TransferDir_ToCard ((u32)0x00000000) -#define SDIO_TransferDir_ToSDIO ((u32)0x00000002) - -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ - ((DIR) == SDIO_TransferDir_ToSDIO)) - -/* SDIO Transfer Type --------------------------------------------------------*/ -#define SDIO_TransferMode_Block ((u32)0x00000000) -#define SDIO_TransferMode_Stream ((u32)0x00000004) - -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ - ((MODE) == SDIO_TransferMode_Block)) - -/* SDIO DPSM State -----------------------------------------------------------*/ -#define SDIO_DPSM_Disable ((u32)0x00000000) -#define SDIO_DPSM_Enable ((u32)0x00000001) - -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) - -/* SDIO Flags ----------------------------------------------------------------*/ -#define SDIO_FLAG_CCRCFAIL ((u32)0x00000001) -#define SDIO_FLAG_DCRCFAIL ((u32)0x00000002) -#define SDIO_FLAG_CTIMEOUT ((u32)0x00000004) -#define SDIO_FLAG_DTIMEOUT ((u32)0x00000008) -#define SDIO_FLAG_TXUNDERR ((u32)0x00000010) -#define SDIO_FLAG_RXOVERR ((u32)0x00000020) -#define SDIO_FLAG_CMDREND ((u32)0x00000040) -#define SDIO_FLAG_CMDSENT ((u32)0x00000080) -#define SDIO_FLAG_DATAEND ((u32)0x00000100) -#define SDIO_FLAG_STBITERR ((u32)0x00000200) -#define SDIO_FLAG_DBCKEND ((u32)0x00000400) -#define SDIO_FLAG_CMDACT ((u32)0x00000800) -#define SDIO_FLAG_TXACT ((u32)0x00001000) -#define SDIO_FLAG_RXACT ((u32)0x00002000) -#define SDIO_FLAG_TXFIFOHE ((u32)0x00004000) -#define SDIO_FLAG_RXFIFOHF ((u32)0x00008000) -#define SDIO_FLAG_TXFIFOF ((u32)0x00010000) -#define SDIO_FLAG_RXFIFOF ((u32)0x00020000) -#define SDIO_FLAG_TXFIFOE ((u32)0x00040000) -#define SDIO_FLAG_RXFIFOE ((u32)0x00080000) -#define SDIO_FLAG_TXDAVL ((u32)0x00100000) -#define SDIO_FLAG_RXDAVL ((u32)0x00200000) -#define SDIO_FLAG_SDIOIT ((u32)0x00400000) -#define SDIO_FLAG_CEATAEND ((u32)0x00800000) - -#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_TXUNDERR) || \ - ((FLAG) == SDIO_FLAG_RXOVERR) || \ - ((FLAG) == SDIO_FLAG_CMDREND) || \ - ((FLAG) == SDIO_FLAG_CMDSENT) || \ - ((FLAG) == SDIO_FLAG_DATAEND) || \ - ((FLAG) == SDIO_FLAG_STBITERR) || \ - ((FLAG) == SDIO_FLAG_DBCKEND) || \ - ((FLAG) == SDIO_FLAG_CMDACT) || \ - ((FLAG) == SDIO_FLAG_TXACT) || \ - ((FLAG) == SDIO_FLAG_RXACT) || \ - ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOF) || \ - ((FLAG) == SDIO_FLAG_RXFIFOF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOE) || \ - ((FLAG) == SDIO_FLAG_TXDAVL) || \ - ((FLAG) == SDIO_FLAG_RXDAVL) || \ - ((FLAG) == SDIO_FLAG_SDIOIT) || \ - ((FLAG) == SDIO_FLAG_CEATAEND)) - -#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFF3FF800) == 0x00) && ((FLAG) != (u32)0x00)) - -#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ - ((IT) == SDIO_IT_DCRCFAIL) || \ - ((IT) == SDIO_IT_CTIMEOUT) || \ - ((IT) == SDIO_IT_DTIMEOUT) || \ - ((IT) == SDIO_IT_TXUNDERR) || \ - ((IT) == SDIO_IT_RXOVERR) || \ - ((IT) == SDIO_IT_CMDREND) || \ - ((IT) == SDIO_IT_CMDSENT) || \ - ((IT) == SDIO_IT_DATAEND) || \ - ((IT) == SDIO_IT_STBITERR) || \ - ((IT) == SDIO_IT_DBCKEND) || \ - ((IT) == SDIO_IT_CMDACT) || \ - ((IT) == SDIO_IT_TXACT) || \ - ((IT) == SDIO_IT_RXACT) || \ - ((IT) == SDIO_IT_TXFIFOHE) || \ - ((IT) == SDIO_IT_RXFIFOHF) || \ - ((IT) == SDIO_IT_TXFIFOF) || \ - ((IT) == SDIO_IT_RXFIFOF) || \ - ((IT) == SDIO_IT_TXFIFOE) || \ - ((IT) == SDIO_IT_RXFIFOE) || \ - ((IT) == SDIO_IT_TXDAVL) || \ - ((IT) == SDIO_IT_RXDAVL) || \ - ((IT) == SDIO_IT_SDIOIT) || \ - ((IT) == SDIO_IT_CEATAEND)) - -#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (u32)0xFF3FF800) == 0x00) && ((IT) != (u32)0x00)) - -/* SDIO Read Wait Mode -------------------------------------------------------*/ -#define SDIO_ReadWaitMode_CLK ((u32)0x00000000) -#define SDIO_ReadWaitMode_DATA2 ((u32)0x00000001) - -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ - ((MODE) == SDIO_ReadWaitMode_DATA2)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void SDIO_DeInit(void); -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_ClockCmd(FunctionalState NewState); -void SDIO_SetPowerState(u32 SDIO_PowerState); -u32 SDIO_GetPowerState(void); -void SDIO_ITConfig(u32 SDIO_IT, FunctionalState NewState); -void SDIO_DMACmd(FunctionalState NewState); -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); -u8 SDIO_GetCommandResponse(void); -u32 SDIO_GetResponse(u32 SDIO_RESP); -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -u32 SDIO_GetDataCounter(void); -u32 SDIO_ReadData(void); -void SDIO_WriteData(u32 Data); -u32 SDIO_GetFIFOCount(void); -void SDIO_StartSDIOReadWait(FunctionalState NewState); -void SDIO_StopSDIOReadWait(FunctionalState NewState); -void SDIO_SetSDIOReadWaitMode(u32 SDIO_ReadWaitMode); -void SDIO_SetSDIOOperation(FunctionalState NewState); -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); -void SDIO_CommandCompletionCmd(FunctionalState NewState); -void SDIO_CEATAITCmd(FunctionalState NewState); -void SDIO_SendCEATACmd(FunctionalState NewState); -FlagStatus SDIO_GetFlagStatus(u32 SDIO_FLAG); -void SDIO_ClearFlag(u32 SDIO_FLAG); -ITStatus SDIO_GetITStatus(u32 SDIO_IT); -void SDIO_ClearITPendingBit(u32 SDIO_IT); - -#endif /* __STM32F10x_SDIO_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_spi.h b/bsp/stm32/library/inc/stm32f10x_spi.h deleted file mode 100644 index a023eebfd..000000000 --- a/bsp/stm32/library/inc/stm32f10x_spi.h +++ /dev/null @@ -1,289 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_spi.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* SPI firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SPI_H -#define __STM32F10x_SPI_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* SPI Init structure definition */ -typedef struct -{ - u16 SPI_Direction; - u16 SPI_Mode; - u16 SPI_DataSize; - u16 SPI_CPOL; - u16 SPI_CPHA; - u16 SPI_NSS; - u16 SPI_BaudRatePrescaler; - u16 SPI_FirstBit; - u16 SPI_CRCPolynomial; -}SPI_InitTypeDef; - -/* I2S Init structure definition */ -typedef struct -{ - u16 I2S_Mode; - u16 I2S_Standard; - u16 I2S_DataFormat; - u16 I2S_MCLKOutput; - u16 I2S_AudioFreq; - u16 I2S_CPOL; -}I2S_InitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -#define IS_SPI_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == SPI1_BASE) || \ - ((*(u32*)&(PERIPH)) == SPI2_BASE) || \ - ((*(u32*)&(PERIPH)) == SPI3_BASE)) - -#define IS_SPI_23_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == SPI2_BASE) || \ - ((*(u32*)&(PERIPH)) == SPI3_BASE)) - -/* SPI data direction mode */ -#define SPI_Direction_2Lines_FullDuplex ((u16)0x0000) -#define SPI_Direction_2Lines_RxOnly ((u16)0x0400) -#define SPI_Direction_1Line_Rx ((u16)0x8000) -#define SPI_Direction_1Line_Tx ((u16)0xC000) - -#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ - ((MODE) == SPI_Direction_2Lines_RxOnly) || \ - ((MODE) == SPI_Direction_1Line_Rx) || \ - ((MODE) == SPI_Direction_1Line_Tx)) - -/* SPI master/slave mode */ -#define SPI_Mode_Master ((u16)0x0104) -#define SPI_Mode_Slave ((u16)0x0000) - -#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ - ((MODE) == SPI_Mode_Slave)) - -/* SPI data size */ -#define SPI_DataSize_16b ((u16)0x0800) -#define SPI_DataSize_8b ((u16)0x0000) - -#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ - ((DATASIZE) == SPI_DataSize_8b)) - -/* SPI Clock Polarity */ -#define SPI_CPOL_Low ((u16)0x0000) -#define SPI_CPOL_High ((u16)0x0002) - -#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ - ((CPOL) == SPI_CPOL_High)) - -/* SPI Clock Phase */ -#define SPI_CPHA_1Edge ((u16)0x0000) -#define SPI_CPHA_2Edge ((u16)0x0001) - -#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ - ((CPHA) == SPI_CPHA_2Edge)) - -/* SPI Slave Select management */ -#define SPI_NSS_Soft ((u16)0x0200) -#define SPI_NSS_Hard ((u16)0x0000) - -#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ - ((NSS) == SPI_NSS_Hard)) - -/* SPI BaudRate Prescaler */ -#define SPI_BaudRatePrescaler_2 ((u16)0x0000) -#define SPI_BaudRatePrescaler_4 ((u16)0x0008) -#define SPI_BaudRatePrescaler_8 ((u16)0x0010) -#define SPI_BaudRatePrescaler_16 ((u16)0x0018) -#define SPI_BaudRatePrescaler_32 ((u16)0x0020) -#define SPI_BaudRatePrescaler_64 ((u16)0x0028) -#define SPI_BaudRatePrescaler_128 ((u16)0x0030) -#define SPI_BaudRatePrescaler_256 ((u16)0x0038) - -#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_256)) - -/* SPI MSB/LSB transmission */ -#define SPI_FirstBit_MSB ((u16)0x0000) -#define SPI_FirstBit_LSB ((u16)0x0080) - -#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ - ((BIT) == SPI_FirstBit_LSB)) - -/* I2S Mode */ -#define I2S_Mode_SlaveTx ((u16)0x0000) -#define I2S_Mode_SlaveRx ((u16)0x0100) -#define I2S_Mode_MasterTx ((u16)0x0200) -#define I2S_Mode_MasterRx ((u16)0x0300) - -#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ - ((MODE) == I2S_Mode_SlaveRx) || \ - ((MODE) == I2S_Mode_MasterTx) || \ - ((MODE) == I2S_Mode_MasterRx) ) - -/* I2S Standard */ -#define I2S_Standard_Phillips ((u16)0x0000) -#define I2S_Standard_MSB ((u16)0x0010) -#define I2S_Standard_LSB ((u16)0x0020) -#define I2S_Standard_PCMShort ((u16)0x0030) -#define I2S_Standard_PCMLong ((u16)0x00B0) - -#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ - ((STANDARD) == I2S_Standard_MSB) || \ - ((STANDARD) == I2S_Standard_LSB) || \ - ((STANDARD) == I2S_Standard_PCMShort) || \ - ((STANDARD) == I2S_Standard_PCMLong)) - -/* I2S Data Format */ -#define I2S_DataFormat_16b ((u16)0x0000) -#define I2S_DataFormat_16bextended ((u16)0x0001) -#define I2S_DataFormat_24b ((u16)0x0003) -#define I2S_DataFormat_32b ((u16)0x0005) - -#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ - ((FORMAT) == I2S_DataFormat_16bextended) || \ - ((FORMAT) == I2S_DataFormat_24b) || \ - ((FORMAT) == I2S_DataFormat_32b)) - -/* I2S MCLK Output */ -#define I2S_MCLKOutput_Enable ((u16)0x0200) -#define I2S_MCLKOutput_Disable ((u16)0x0000) - -#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ - ((OUTPUT) == I2S_MCLKOutput_Disable)) - -/* I2S Audio Frequency */ -#define I2S_AudioFreq_48k ((u16)48000) -#define I2S_AudioFreq_44k ((u16)44100) -#define I2S_AudioFreq_22k ((u16)22050) -#define I2S_AudioFreq_16k ((u16)16000) -#define I2S_AudioFreq_8k ((u16)8000) -#define I2S_AudioFreq_Default ((u16)2) - -#define IS_I2S_AUDIO_FREQ(FREQ) (((FREQ) == I2S_AudioFreq_48k) || \ - ((FREQ) == I2S_AudioFreq_44k) || \ - ((FREQ) == I2S_AudioFreq_22k) || \ - ((FREQ) == I2S_AudioFreq_16k) || \ - ((FREQ) == I2S_AudioFreq_8k) || \ - ((FREQ) == I2S_AudioFreq_Default)) - -/* I2S Clock Polarity */ -#define I2S_CPOL_Low ((u16)0x0000) -#define I2S_CPOL_High ((u16)0x0008) - -#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ - ((CPOL) == I2S_CPOL_High)) - -/* SPI_I2S DMA transfer requests */ -#define SPI_I2S_DMAReq_Tx ((u16)0x0002) -#define SPI_I2S_DMAReq_Rx ((u16)0x0001) - -#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (u16)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) - -/* SPI NSS internal software mangement */ -#define SPI_NSSInternalSoft_Set ((u16)0x0100) -#define SPI_NSSInternalSoft_Reset ((u16)0xFEFF) - -#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ - ((INTERNAL) == SPI_NSSInternalSoft_Reset)) - -/* SPI CRC Transmit/Receive */ -#define SPI_CRC_Tx ((u8)0x00) -#define SPI_CRC_Rx ((u8)0x01) - -#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) - -/* SPI direction transmit/receive */ -#define SPI_Direction_Rx ((u16)0xBFFF) -#define SPI_Direction_Tx ((u16)0x4000) - -#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ - ((DIRECTION) == SPI_Direction_Tx)) - -/* SPI_I2S interrupts definition */ -#define SPI_I2S_IT_TXE ((u8)0x71) -#define SPI_I2S_IT_RXNE ((u8)0x60) -#define SPI_I2S_IT_ERR ((u8)0x50) - -#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == SPI_I2S_IT_RXNE) || \ - ((IT) == SPI_I2S_IT_ERR)) - -#define SPI_I2S_IT_OVR ((u8)0x56) -#define SPI_IT_MODF ((u8)0x55) -#define SPI_IT_CRCERR ((u8)0x54) -#define I2S_IT_UDR ((u8)0x53) - -#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) - -#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ - ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) - -/* SPI_I2S flags definition */ -#define SPI_I2S_FLAG_RXNE ((u16)0x0001) -#define SPI_I2S_FLAG_TXE ((u16)0x0002) -#define I2S_FLAG_CHSIDE ((u16)0x0004) -#define I2S_FLAG_UDR ((u16)0x0008) -#define SPI_FLAG_CRCERR ((u16)0x0010) -#define SPI_FLAG_MODF ((u16)0x0020) -#define SPI_I2S_FLAG_OVR ((u16)0x0040) -#define SPI_I2S_FLAG_BSY ((u16)0x0080) - -#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) - -#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ - ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ - ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ - ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) - -/* SPI CRC polynomial --------------------------------------------------------*/ -#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx); -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, u8 SPI_I2S_IT, FunctionalState NewState); -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, u16 SPI_I2S_DMAReq, FunctionalState NewState); -void SPI_I2S_SendData(SPI_TypeDef* SPIx, u16 Data); -u16 SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, u16 SPI_NSSInternalSoft); -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, u16 SPI_DataSize); -void SPI_TransmitCRC(SPI_TypeDef* SPIx); -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); -u16 SPI_GetCRC(SPI_TypeDef* SPIx, u8 SPI_CRC); -u16 SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, u16 SPI_Direction); -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG); -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG); -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, u8 SPI_I2S_IT); -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, u8 SPI_I2S_IT); - -#endif /*__STM32F10x_SPI_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_systick.h b/bsp/stm32/library/inc/stm32f10x_systick.h deleted file mode 100644 index 633dd2c40..000000000 --- a/bsp/stm32/library/inc/stm32f10x_systick.h +++ /dev/null @@ -1,64 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_systick.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* SysTick firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SYSTICK_H -#define __STM32F10x_SYSTICK_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* SysTick clock source */ -#define SysTick_CLKSource_HCLK_Div8 ((u32)0xFFFFFFFB) -#define SysTick_CLKSource_HCLK ((u32)0x00000004) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ - ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) - -/* SysTick counter state */ -#define SysTick_Counter_Disable ((u32)0xFFFFFFFE) -#define SysTick_Counter_Enable ((u32)0x00000001) -#define SysTick_Counter_Clear ((u32)0x00000000) - -#define IS_SYSTICK_COUNTER(COUNTER) (((COUNTER) == SysTick_Counter_Disable) || \ - ((COUNTER) == SysTick_Counter_Enable) || \ - ((COUNTER) == SysTick_Counter_Clear)) - -/* SysTick Flag */ -#define SysTick_FLAG_COUNT ((u32)0x00000010) -#define SysTick_FLAG_SKEW ((u32)0x0000001E) -#define SysTick_FLAG_NOREF ((u32)0x0000001F) - -#define IS_SYSTICK_FLAG(FLAG) (((FLAG) == SysTick_FLAG_COUNT) || \ - ((FLAG) == SysTick_FLAG_SKEW) || \ - ((FLAG) == SysTick_FLAG_NOREF)) - -#define IS_SYSTICK_RELOAD(RELOAD) (((RELOAD) > 0) && ((RELOAD) <= 0xFFFFFF)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void SysTick_CLKSourceConfig(u32 SysTick_CLKSource); -void SysTick_SetReload(u32 Reload); -void SysTick_CounterCmd(u32 SysTick_Counter); -void SysTick_ITConfig(FunctionalState NewState); -u32 SysTick_GetCounter(void); -FlagStatus SysTick_GetFlagStatus(u8 SysTick_FLAG); - -#endif /* __STM32F10x_SYSTICK_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_tim.h b/bsp/stm32/library/inc/stm32f10x_tim.h deleted file mode 100644 index e82ee6f70..000000000 --- a/bsp/stm32/library/inc/stm32f10x_tim.h +++ /dev/null @@ -1,778 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_tim.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* TIM firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_TIM_H -#define __STM32F10x_TIM_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ - -/* TIM Time Base Init structure definition */ -typedef struct -{ - u16 TIM_Prescaler; - u16 TIM_CounterMode; - u16 TIM_Period; - u16 TIM_ClockDivision; - u8 TIM_RepetitionCounter; -} TIM_TimeBaseInitTypeDef; - -/* TIM Output Compare Init structure definition */ -typedef struct -{ - u16 TIM_OCMode; - u16 TIM_OutputState; - u16 TIM_OutputNState; - u16 TIM_Pulse; - u16 TIM_OCPolarity; - u16 TIM_OCNPolarity; - u16 TIM_OCIdleState; - u16 TIM_OCNIdleState; -} TIM_OCInitTypeDef; - -/* TIM Input Capture Init structure definition */ -typedef struct -{ - u16 TIM_Channel; - u16 TIM_ICPolarity; - u16 TIM_ICSelection; - u16 TIM_ICPrescaler; - u16 TIM_ICFilter; -} TIM_ICInitTypeDef; - -/* BDTR structure definition */ -typedef struct -{ - u16 TIM_OSSRState; - u16 TIM_OSSIState; - u16 TIM_LOCKLevel; - u16 TIM_DeadTime; - u16 TIM_Break; - u16 TIM_BreakPolarity; - u16 TIM_AutomaticOutput; -} TIM_BDTRInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -#define IS_TIM_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == TIM1_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM2_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM5_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM6_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM7_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM8_BASE)) - -#define IS_TIM_18_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == TIM1_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM8_BASE)) - -#define IS_TIM_123458_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == TIM1_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM2_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM5_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM8_BASE)) - -/* TIM Output Compare and PWM modes -----------------------------------------*/ -#define TIM_OCMode_Timing ((u16)0x0000) -#define TIM_OCMode_Active ((u16)0x0010) -#define TIM_OCMode_Inactive ((u16)0x0020) -#define TIM_OCMode_Toggle ((u16)0x0030) -#define TIM_OCMode_PWM1 ((u16)0x0060) -#define TIM_OCMode_PWM2 ((u16)0x0070) - -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2)) - -#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2) || \ - ((MODE) == TIM_ForcedAction_Active) || \ - ((MODE) == TIM_ForcedAction_InActive)) -/* TIM One Pulse Mode -------------------------------------------------------*/ -#define TIM_OPMode_Single ((u16)0x0008) -#define TIM_OPMode_Repetitive ((u16)0x0000) - -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ - ((MODE) == TIM_OPMode_Repetitive)) - -/* TIM Channel -------------------------------------------------------------*/ -#define TIM_Channel_1 ((u16)0x0000) -#define TIM_Channel_2 ((u16)0x0004) -#define TIM_Channel_3 ((u16)0x0008) -#define TIM_Channel_4 ((u16)0x000C) - -#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3) || \ - ((CHANNEL) == TIM_Channel_4)) - -#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3)) -/* TIM Clock Division CKD --------------------------------------------------*/ -#define TIM_CKD_DIV1 ((u16)0x0000) -#define TIM_CKD_DIV2 ((u16)0x0100) -#define TIM_CKD_DIV4 ((u16)0x0200) - -#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ - ((DIV) == TIM_CKD_DIV2) || \ - ((DIV) == TIM_CKD_DIV4)) - -/* TIM Counter Mode --------------------------------------------------------*/ -#define TIM_CounterMode_Up ((u16)0x0000) -#define TIM_CounterMode_Down ((u16)0x0010) -#define TIM_CounterMode_CenterAligned1 ((u16)0x0020) -#define TIM_CounterMode_CenterAligned2 ((u16)0x0040) -#define TIM_CounterMode_CenterAligned3 ((u16)0x0060) - -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ - ((MODE) == TIM_CounterMode_Down) || \ - ((MODE) == TIM_CounterMode_CenterAligned1) || \ - ((MODE) == TIM_CounterMode_CenterAligned2) || \ - ((MODE) == TIM_CounterMode_CenterAligned3)) - -/* TIM Output Compare Polarity ---------------------------------------------*/ -#define TIM_OCPolarity_High ((u16)0x0000) -#define TIM_OCPolarity_Low ((u16)0x0002) - -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ - ((POLARITY) == TIM_OCPolarity_Low)) - -/* TIM Output Compare N Polarity -------------------------------------------*/ -#define TIM_OCNPolarity_High ((u16)0x0000) -#define TIM_OCNPolarity_Low ((u16)0x0008) - -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ - ((POLARITY) == TIM_OCNPolarity_Low)) - -/* TIM Output Compare states -----------------------------------------------*/ -#define TIM_OutputState_Disable ((u16)0x0000) -#define TIM_OutputState_Enable ((u16)0x0001) - -#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ - ((STATE) == TIM_OutputState_Enable)) - -/* TIM Output Compare N States ---------------------------------------------*/ -#define TIM_OutputNState_Disable ((u16)0x0000) -#define TIM_OutputNState_Enable ((u16)0x0004) - -#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ - ((STATE) == TIM_OutputNState_Enable)) - -/* TIM Capture Compare States -----------------------------------------------*/ -#define TIM_CCx_Enable ((u16)0x0001) -#define TIM_CCx_Disable ((u16)0x0000) - -#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ - ((CCX) == TIM_CCx_Disable)) - -/* TIM Capture Compare N States --------------------------------------------*/ -#define TIM_CCxN_Enable ((u16)0x0004) -#define TIM_CCxN_Disable ((u16)0x0000) - -#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ - ((CCXN) == TIM_CCxN_Disable)) - -/* Break Input enable/disable -----------------------------------------------*/ -#define TIM_Break_Enable ((u16)0x1000) -#define TIM_Break_Disable ((u16)0x0000) - -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ - ((STATE) == TIM_Break_Disable)) - -/* Break Polarity -----------------------------------------------------------*/ -#define TIM_BreakPolarity_Low ((u16)0x0000) -#define TIM_BreakPolarity_High ((u16)0x2000) - -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ - ((POLARITY) == TIM_BreakPolarity_High)) - -/* TIM AOE Bit Set/Reset ---------------------------------------------------*/ -#define TIM_AutomaticOutput_Enable ((u16)0x4000) -#define TIM_AutomaticOutput_Disable ((u16)0x0000) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ - ((STATE) == TIM_AutomaticOutput_Disable)) -/* Lock levels --------------------------------------------------------------*/ -#define TIM_LOCKLevel_OFF ((u16)0x0000) -#define TIM_LOCKLevel_1 ((u16)0x0100) -#define TIM_LOCKLevel_2 ((u16)0x0200) -#define TIM_LOCKLevel_3 ((u16)0x0300) - -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ - ((LEVEL) == TIM_LOCKLevel_1) || \ - ((LEVEL) == TIM_LOCKLevel_2) || \ - ((LEVEL) == TIM_LOCKLevel_3)) - -/* OSSI: Off-State Selection for Idle mode states ---------------------------*/ -#define TIM_OSSIState_Enable ((u16)0x0400) -#define TIM_OSSIState_Disable ((u16)0x0000) - -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ - ((STATE) == TIM_OSSIState_Disable)) - -/* OSSR: Off-State Selection for Run mode states ----------------------------*/ -#define TIM_OSSRState_Enable ((u16)0x0800) -#define TIM_OSSRState_Disable ((u16)0x0000) - -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ - ((STATE) == TIM_OSSRState_Disable)) - -/* TIM Output Compare Idle State -------------------------------------------*/ -#define TIM_OCIdleState_Set ((u16)0x0100) -#define TIM_OCIdleState_Reset ((u16)0x0000) - -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ - ((STATE) == TIM_OCIdleState_Reset)) - -/* TIM Output Compare N Idle State -----------------------------------------*/ -#define TIM_OCNIdleState_Set ((u16)0x0200) -#define TIM_OCNIdleState_Reset ((u16)0x0000) - -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ - ((STATE) == TIM_OCNIdleState_Reset)) - -/* TIM Input Capture Polarity ----------------------------------------------*/ -#define TIM_ICPolarity_Rising ((u16)0x0000) -#define TIM_ICPolarity_Falling ((u16)0x0002) - -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ - ((POLARITY) == TIM_ICPolarity_Falling)) - -/* TIM Input Capture Selection ---------------------------------------------*/ -#define TIM_ICSelection_DirectTI ((u16)0x0001) -#define TIM_ICSelection_IndirectTI ((u16)0x0002) -#define TIM_ICSelection_TRC ((u16)0x0003) - -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ - ((SELECTION) == TIM_ICSelection_IndirectTI) || \ - ((SELECTION) == TIM_ICSelection_TRC)) - -/* TIM Input Capture Prescaler ---------------------------------------------*/ -#define TIM_ICPSC_DIV1 ((u16)0x0000) -#define TIM_ICPSC_DIV2 ((u16)0x0004) -#define TIM_ICPSC_DIV4 ((u16)0x0008) -#define TIM_ICPSC_DIV8 ((u16)0x000C) - -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) - -/* TIM interrupt sources ---------------------------------------------------*/ -#define TIM_IT_Update ((u16)0x0001) -#define TIM_IT_CC1 ((u16)0x0002) -#define TIM_IT_CC2 ((u16)0x0004) -#define TIM_IT_CC3 ((u16)0x0008) -#define TIM_IT_CC4 ((u16)0x0010) -#define TIM_IT_COM ((u16)0x0020) -#define TIM_IT_Trigger ((u16)0x0040) -#define TIM_IT_Break ((u16)0x0080) - -#define IS_TIM_IT(IT) ((((IT) & (u16)0xFF00) == 0x0000) && ((IT) != 0x0000)) - -#define IS_TIM_PERIPH_IT(PERIPH, TIM_IT) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((TIM_IT) & (u16)0xFFA0) == 0x0000) && ((TIM_IT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((TIM_IT) & (u16)0xFF00) == 0x0000) && ((TIM_IT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((TIM_IT) & (u16)0xFFFE) == 0x0000) && ((TIM_IT) != 0x0000))) - -#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ - ((IT) == TIM_IT_CC1) || \ - ((IT) == TIM_IT_CC2) || \ - ((IT) == TIM_IT_CC3) || \ - ((IT) == TIM_IT_CC4) || \ - ((IT) == TIM_IT_COM) || \ - ((IT) == TIM_IT_Trigger) || \ - ((IT) == TIM_IT_Break)) - -/* TIM DMA Base address ----------------------------------------------------*/ -#define TIM_DMABase_CR1 ((u16)0x0000) -#define TIM_DMABase_CR2 ((u16)0x0001) -#define TIM_DMABase_SMCR ((u16)0x0002) -#define TIM_DMABase_DIER ((u16)0x0003) -#define TIM_DMABase_SR ((u16)0x0004) -#define TIM_DMABase_EGR ((u16)0x0005) -#define TIM_DMABase_CCMR1 ((u16)0x0006) -#define TIM_DMABase_CCMR2 ((u16)0x0007) -#define TIM_DMABase_CCER ((u16)0x0008) -#define TIM_DMABase_CNT ((u16)0x0009) -#define TIM_DMABase_PSC ((u16)0x000A) -#define TIM_DMABase_ARR ((u16)0x000B) -#define TIM_DMABase_RCR ((u16)0x000C) -#define TIM_DMABase_CCR1 ((u16)0x000D) -#define TIM_DMABase_CCR2 ((u16)0x000E) -#define TIM_DMABase_CCR3 ((u16)0x000F) -#define TIM_DMABase_CCR4 ((u16)0x0010) -#define TIM_DMABase_BDTR ((u16)0x0011) -#define TIM_DMABase_DCR ((u16)0x0012) - -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ - ((BASE) == TIM_DMABase_CR2) || \ - ((BASE) == TIM_DMABase_SMCR) || \ - ((BASE) == TIM_DMABase_DIER) || \ - ((BASE) == TIM_DMABase_SR) || \ - ((BASE) == TIM_DMABase_EGR) || \ - ((BASE) == TIM_DMABase_CCMR1) || \ - ((BASE) == TIM_DMABase_CCMR2) || \ - ((BASE) == TIM_DMABase_CCER) || \ - ((BASE) == TIM_DMABase_CNT) || \ - ((BASE) == TIM_DMABase_PSC) || \ - ((BASE) == TIM_DMABase_ARR) || \ - ((BASE) == TIM_DMABase_RCR) || \ - ((BASE) == TIM_DMABase_CCR1) || \ - ((BASE) == TIM_DMABase_CCR2) || \ - ((BASE) == TIM_DMABase_CCR3) || \ - ((BASE) == TIM_DMABase_CCR4) || \ - ((BASE) == TIM_DMABase_BDTR) || \ - ((BASE) == TIM_DMABase_DCR)) - -/* TIM DMA Burst Length ----------------------------------------------------*/ -#define TIM_DMABurstLength_1Byte ((u16)0x0000) -#define TIM_DMABurstLength_2Bytes ((u16)0x0100) -#define TIM_DMABurstLength_3Bytes ((u16)0x0200) -#define TIM_DMABurstLength_4Bytes ((u16)0x0300) -#define TIM_DMABurstLength_5Bytes ((u16)0x0400) -#define TIM_DMABurstLength_6Bytes ((u16)0x0500) -#define TIM_DMABurstLength_7Bytes ((u16)0x0600) -#define TIM_DMABurstLength_8Bytes ((u16)0x0700) -#define TIM_DMABurstLength_9Bytes ((u16)0x0800) -#define TIM_DMABurstLength_10Bytes ((u16)0x0900) -#define TIM_DMABurstLength_11Bytes ((u16)0x0A00) -#define TIM_DMABurstLength_12Bytes ((u16)0x0B00) -#define TIM_DMABurstLength_13Bytes ((u16)0x0C00) -#define TIM_DMABurstLength_14Bytes ((u16)0x0D00) -#define TIM_DMABurstLength_15Bytes ((u16)0x0E00) -#define TIM_DMABurstLength_16Bytes ((u16)0x0F00) -#define TIM_DMABurstLength_17Bytes ((u16)0x1000) -#define TIM_DMABurstLength_18Bytes ((u16)0x1100) - -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Byte) || \ - ((LENGTH) == TIM_DMABurstLength_2Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_3Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_4Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_5Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_6Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_7Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_8Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_9Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_10Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_11Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_12Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_13Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_14Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_15Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_16Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_17Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_18Bytes)) - -/* TIM DMA sources ---------------------------------------------------------*/ -#define TIM_DMA_Update ((u16)0x0100) -#define TIM_DMA_CC1 ((u16)0x0200) -#define TIM_DMA_CC2 ((u16)0x0400) -#define TIM_DMA_CC3 ((u16)0x0800) -#define TIM_DMA_CC4 ((u16)0x1000) -#define TIM_DMA_COM ((u16)0x2000) -#define TIM_DMA_Trigger ((u16)0x4000) - -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (u16)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) - -#define IS_TIM_PERIPH_DMA(PERIPH, SOURCE) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((SOURCE) & (u16)0xA0FF) == 0x0000) && ((SOURCE) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((SOURCE) & (u16)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((SOURCE) & (u16)0xFEFF) == 0x0000) && ((SOURCE) != 0x0000))) - -/* TIM External Trigger Prescaler ------------------------------------------*/ -#define TIM_ExtTRGPSC_OFF ((u16)0x0000) -#define TIM_ExtTRGPSC_DIV2 ((u16)0x1000) -#define TIM_ExtTRGPSC_DIV4 ((u16)0x2000) -#define TIM_ExtTRGPSC_DIV8 ((u16)0x3000) - -#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) - -/* TIM Internal Trigger Selection ------------------------------------------*/ -#define TIM_TS_ITR0 ((u16)0x0000) -#define TIM_TS_ITR1 ((u16)0x0010) -#define TIM_TS_ITR2 ((u16)0x0020) -#define TIM_TS_ITR3 ((u16)0x0030) -#define TIM_TS_TI1F_ED ((u16)0x0040) -#define TIM_TS_TI1FP1 ((u16)0x0050) -#define TIM_TS_TI2FP2 ((u16)0x0060) -#define TIM_TS_ETRF ((u16)0x0070) - -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3)) - -/* TIM TIx External Clock Source -------------------------------------------*/ -#define TIM_TIxExternalCLK1Source_TI1 ((u16)0x0050) -#define TIM_TIxExternalCLK1Source_TI2 ((u16)0x0060) -#define TIM_TIxExternalCLK1Source_TI1ED ((u16)0x0040) - -#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) - -/* TIM External Trigger Polarity -------------------------------------------*/ -#define TIM_ExtTRGPolarity_Inverted ((u16)0x8000) -#define TIM_ExtTRGPolarity_NonInverted ((u16)0x0000) - -#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ - ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) - -/* TIM Prescaler Reload Mode -----------------------------------------------*/ -#define TIM_PSCReloadMode_Update ((u16)0x0000) -#define TIM_PSCReloadMode_Immediate ((u16)0x0001) - -#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ - ((RELOAD) == TIM_PSCReloadMode_Immediate)) - -/* TIM Forced Action -------------------------------------------------------*/ -#define TIM_ForcedAction_Active ((u16)0x0050) -#define TIM_ForcedAction_InActive ((u16)0x0040) - -#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ - ((ACTION) == TIM_ForcedAction_InActive)) - -/* TIM Encoder Mode --------------------------------------------------------*/ -#define TIM_EncoderMode_TI1 ((u16)0x0001) -#define TIM_EncoderMode_TI2 ((u16)0x0002) -#define TIM_EncoderMode_TI12 ((u16)0x0003) - -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ - ((MODE) == TIM_EncoderMode_TI2) || \ - ((MODE) == TIM_EncoderMode_TI12)) - -/* TIM Event Source --------------------------------------------------------*/ -#define TIM_EventSource_Update ((u16)0x0001) -#define TIM_EventSource_CC1 ((u16)0x0002) -#define TIM_EventSource_CC2 ((u16)0x0004) -#define TIM_EventSource_CC3 ((u16)0x0008) -#define TIM_EventSource_CC4 ((u16)0x0010) -#define TIM_EventSource_COM ((u16)0x0020) -#define TIM_EventSource_Trigger ((u16)0x0040) -#define TIM_EventSource_Break ((u16)0x0080) - -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (u16)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) - -#define IS_TIM_PERIPH_EVENT(PERIPH, EVENT) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((EVENT) & (u16)0xFFA0) == 0x0000) && ((EVENT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((EVENT) & (u16)0xFF00) == 0x0000) && ((EVENT) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((EVENT) & (u16)0xFFFE) == 0x0000) && ((EVENT) != 0x0000))) - -/* TIM Update Source --------------------------------------------------------*/ -#define TIM_UpdateSource_Global ((u16)0x0000) -#define TIM_UpdateSource_Regular ((u16)0x0001) - -#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ - ((SOURCE) == TIM_UpdateSource_Regular)) - -/* TIM Ouput Compare Preload State ------------------------------------------*/ -#define TIM_OCPreload_Enable ((u16)0x0008) -#define TIM_OCPreload_Disable ((u16)0x0000) - -#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ - ((STATE) == TIM_OCPreload_Disable)) - -/* TIM Ouput Compare Fast State ---------------------------------------------*/ -#define TIM_OCFast_Enable ((u16)0x0004) -#define TIM_OCFast_Disable ((u16)0x0000) - -#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ - ((STATE) == TIM_OCFast_Disable)) - -/* TIM Ouput Compare Clear State --------------------------------------------*/ -#define TIM_OCClear_Enable ((u16)0x0080) -#define TIM_OCClear_Disable ((u16)0x0000) - -#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ - ((STATE) == TIM_OCClear_Disable)) - -/* TIM Trigger Output Source ------------------------------------------------*/ -#define TIM_TRGOSource_Reset ((u16)0x0000) -#define TIM_TRGOSource_Enable ((u16)0x0010) -#define TIM_TRGOSource_Update ((u16)0x0020) -#define TIM_TRGOSource_OC1 ((u16)0x0030) -#define TIM_TRGOSource_OC1Ref ((u16)0x0040) -#define TIM_TRGOSource_OC2Ref ((u16)0x0050) -#define TIM_TRGOSource_OC3Ref ((u16)0x0060) -#define TIM_TRGOSource_OC4Ref ((u16)0x0070) - -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ - ((SOURCE) == TIM_TRGOSource_Enable) || \ - ((SOURCE) == TIM_TRGOSource_Update) || \ - ((SOURCE) == TIM_TRGOSource_OC1) || \ - ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC4Ref)) - -#define IS_TIM_PERIPH_TRGO(PERIPH, TRGO) (((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM6_BASE))||(((*(u32*)&(PERIPH)) == TIM7_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_Reset)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM6_BASE))||(((*(u32*)&(PERIPH)) == TIM7_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_Enable)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM6_BASE))||(((*(u32*)&(PERIPH)) == TIM7_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_Update)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC1)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC1Ref)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC2Ref)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC3Ref)) ||\ - ((((*(u32*)&(PERIPH)) == TIM2_BASE)||(((*(u32*)&(PERIPH)) == TIM1_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM3_BASE))||(((*(u32*)&(PERIPH)) == TIM4_BASE))|| \ - (((*(u32*)&(PERIPH)) == TIM5_BASE))||(((*(u32*)&(PERIPH)) == TIM8_BASE))) && \ - ((TRGO) == TIM_TRGOSource_OC4Ref))) - -/* TIM Slave Mode ----------------------------------------------------------*/ -#define TIM_SlaveMode_Reset ((u16)0x0004) -#define TIM_SlaveMode_Gated ((u16)0x0005) -#define TIM_SlaveMode_Trigger ((u16)0x0006) -#define TIM_SlaveMode_External1 ((u16)0x0007) - -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ - ((MODE) == TIM_SlaveMode_Gated) || \ - ((MODE) == TIM_SlaveMode_Trigger) || \ - ((MODE) == TIM_SlaveMode_External1)) - -/* TIM Master Slave Mode ---------------------------------------------------*/ -#define TIM_MasterSlaveMode_Enable ((u16)0x0080) -#define TIM_MasterSlaveMode_Disable ((u16)0x0000) - -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ - ((STATE) == TIM_MasterSlaveMode_Disable)) - -/* TIM Flags ---------------------------------------------------------------*/ -#define TIM_FLAG_Update ((u16)0x0001) -#define TIM_FLAG_CC1 ((u16)0x0002) -#define TIM_FLAG_CC2 ((u16)0x0004) -#define TIM_FLAG_CC3 ((u16)0x0008) -#define TIM_FLAG_CC4 ((u16)0x0010) -#define TIM_FLAG_COM ((u16)0x0020) -#define TIM_FLAG_Trigger ((u16)0x0040) -#define TIM_FLAG_Break ((u16)0x0080) -#define TIM_FLAG_CC1OF ((u16)0x0200) -#define TIM_FLAG_CC2OF ((u16)0x0400) -#define TIM_FLAG_CC3OF ((u16)0x0800) -#define TIM_FLAG_CC4OF ((u16)0x1000) - -#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ - ((FLAG) == TIM_FLAG_CC1) || \ - ((FLAG) == TIM_FLAG_CC2) || \ - ((FLAG) == TIM_FLAG_CC3) || \ - ((FLAG) == TIM_FLAG_CC4) || \ - ((FLAG) == TIM_FLAG_COM) || \ - ((FLAG) == TIM_FLAG_Trigger) || \ - ((FLAG) == TIM_FLAG_Break) || \ - ((FLAG) == TIM_FLAG_CC1OF) || \ - ((FLAG) == TIM_FLAG_CC2OF) || \ - ((FLAG) == TIM_FLAG_CC3OF) || \ - ((FLAG) == TIM_FLAG_CC4OF)) - -#define IS_TIM_CLEAR_FLAG(PERIPH, TIM_FLAG) ((((((*(u32*)&(PERIPH)) == TIM2_BASE) || (((*(u32*)&(PERIPH)) == TIM3_BASE))||\ - (((*(u32*)&(PERIPH)) == TIM4_BASE)) || (((*(u32*)&(PERIPH)) == TIM5_BASE))))&& \ - (((TIM_FLAG) & (u16)0xE1A0) == 0x0000) && ((TIM_FLAG) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM1_BASE) || (((*(u32*)&(PERIPH)) == TIM8_BASE))))&& \ - (((TIM_FLAG) & (u16)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) ||\ - (((((*(u32*)&(PERIPH)) == TIM6_BASE) || (((*(u32*)&(PERIPH)) == TIM7_BASE))))&& \ - (((TIM_FLAG) & (u16)0xFFFE) == 0x0000) && ((TIM_FLAG) != 0x0000))) - -#define IS_TIM_PERIPH_FLAG(PERIPH, TIM_FLAG) (((((*(u32*)&(PERIPH))==TIM2_BASE) || ((*(u32*)&(PERIPH)) == TIM3_BASE) ||\ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || ((*(u32*)&(PERIPH))==TIM5_BASE) || \ - ((*(u32*)&(PERIPH))==TIM1_BASE) || ((*(u32*)&(PERIPH))==TIM8_BASE)) &&\ - (((TIM_FLAG) == TIM_FLAG_CC1) || ((TIM_FLAG) == TIM_FLAG_CC2) ||\ - ((TIM_FLAG) == TIM_FLAG_CC3) || ((TIM_FLAG) == TIM_FLAG_CC4) || \ - ((TIM_FLAG) == TIM_FLAG_Trigger))) ||\ - ((((*(u32*)&(PERIPH))==TIM2_BASE) || ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || ((*(u32*)&(PERIPH))==TIM5_BASE) ||\ - ((*(u32*)&(PERIPH))==TIM1_BASE)|| ((*(u32*)&(PERIPH))==TIM8_BASE) || \ - ((*(u32*)&(PERIPH))==TIM7_BASE) || ((*(u32*)&(PERIPH))==TIM6_BASE)) && \ - (((TIM_FLAG) == TIM_FLAG_Update))) ||\ - ((((*(u32*)&(PERIPH))==TIM1_BASE) || ((*(u32*)&(PERIPH)) == TIM8_BASE)) &&\ - (((TIM_FLAG) == TIM_FLAG_COM) || ((TIM_FLAG) == TIM_FLAG_Break))) ||\ - ((((*(u32*)&(PERIPH))==TIM2_BASE) || ((*(u32*)&(PERIPH)) == TIM3_BASE) || \ - ((*(u32*)&(PERIPH)) == TIM4_BASE) || ((*(u32*)&(PERIPH))==TIM5_BASE) || \ - ((*(u32*)&(PERIPH))==TIM1_BASE) || ((*(u32*)&(PERIPH))==TIM8_BASE)) &&\ - (((TIM_FLAG) == TIM_FLAG_CC1OF) || ((TIM_FLAG) == TIM_FLAG_CC2OF) ||\ - ((TIM_FLAG) == TIM_FLAG_CC3OF) || ((TIM_FLAG) == TIM_FLAG_CC4OF)))) - -/* TIM Input Capture Filer Value ---------------------------------------------*/ -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) - -/* TIM External Trigger Filter -----------------------------------------------*/ -#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -void TIM_DeInit(TIM_TypeDef* TIMx); -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_ITConfig(TIM_TypeDef* TIMx, u16 TIM_IT, FunctionalState NewState); -void TIM_GenerateEvent(TIM_TypeDef* TIMx, u16 TIM_EventSource); -void TIM_DMAConfig(TIM_TypeDef* TIMx, u16 TIM_DMABase, u16 TIM_DMABurstLength); -void TIM_DMACmd(TIM_TypeDef* TIMx, u16 TIM_DMASource, FunctionalState NewState); -void TIM_InternalClockConfig(TIM_TypeDef* TIMx); -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource); -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_TIxExternalCLKSource, - u16 TIM_ICPolarity, u16 ICFilter); -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter); -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, - u16 TIM_ExtTRGPolarity, u16 ExtTRGFilter); -void TIM_ETRConfig(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter); -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, u16 Prescaler, u16 TIM_PSCReloadMode); -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode); -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource); -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, u16 TIM_EncoderMode, - u16 TIM_IC1Polarity, u16 TIM_IC2Polarity); -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction); -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload); -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast); -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear); -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity); -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity); -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity); -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity); -void TIM_CCxCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCx); -void TIM_CCxNCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCxN); -void TIM_SelectOCxM(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_OCMode); -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, u16 TIM_UpdateSource); -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, u16 TIM_OPMode); -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, u16 TIM_TRGOSource); -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, u16 TIM_SlaveMode); -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, u16 TIM_MasterSlaveMode); -void TIM_SetCounter(TIM_TypeDef* TIMx, u16 Counter); -void TIM_SetAutoreload(TIM_TypeDef* TIMx, u16 Autoreload); -void TIM_SetCompare1(TIM_TypeDef* TIMx, u16 Compare1); -void TIM_SetCompare2(TIM_TypeDef* TIMx, u16 Compare2); -void TIM_SetCompare3(TIM_TypeDef* TIMx, u16 Compare3); -void TIM_SetCompare4(TIM_TypeDef* TIMx, u16 Compare4); -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC); -void TIM_SetClockDivision(TIM_TypeDef* TIMx, u16 TIM_CKD); -u16 TIM_GetCapture1(TIM_TypeDef* TIMx); -u16 TIM_GetCapture2(TIM_TypeDef* TIMx); -u16 TIM_GetCapture3(TIM_TypeDef* TIMx); -u16 TIM_GetCapture4(TIM_TypeDef* TIMx); -u16 TIM_GetCounter(TIM_TypeDef* TIMx); -u16 TIM_GetPrescaler(TIM_TypeDef* TIMx); -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, u16 TIM_FLAG); -void TIM_ClearFlag(TIM_TypeDef* TIMx, u16 TIM_FLAG); -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, u16 TIM_IT); -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, u16 TIM_IT); - -#endif /*__STM32F10x_TIM_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ - - - - - - - - diff --git a/bsp/stm32/library/inc/stm32f10x_type.h b/bsp/stm32/library/inc/stm32f10x_type.h deleted file mode 100644 index 1ca3e5261..000000000 --- a/bsp/stm32/library/inc/stm32f10x_type.h +++ /dev/null @@ -1,80 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_type.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the common data types used for the -* STM32F10x firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_TYPE_H -#define __STM32F10x_TYPE_H - -/* Includes ------------------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -typedef signed long s32; -typedef signed short s16; -typedef signed char s8; - -typedef signed long const sc32; /* Read Only */ -typedef signed short const sc16; /* Read Only */ -typedef signed char const sc8; /* Read Only */ - -typedef volatile signed long vs32; -typedef volatile signed short vs16; -typedef volatile signed char vs8; - -typedef volatile signed long const vsc32; /* Read Only */ -typedef volatile signed short const vsc16; /* Read Only */ -typedef volatile signed char const vsc8; /* Read Only */ - -typedef unsigned long u32; -typedef unsigned short u16; -typedef unsigned char u8; - -typedef unsigned long const uc32; /* Read Only */ -typedef unsigned short const uc16; /* Read Only */ -typedef unsigned char const uc8; /* Read Only */ - -typedef volatile unsigned long vu32; -typedef volatile unsigned short vu16; -typedef volatile unsigned char vu8; - -typedef volatile unsigned long const vuc32; /* Read Only */ -typedef volatile unsigned short const vuc16; /* Read Only */ -typedef volatile unsigned char const vuc8; /* Read Only */ - -typedef enum {FALSE = 0, TRUE = !FALSE} bool; - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -#define U8_MAX ((u8)255) -#define S8_MAX ((s8)127) -#define S8_MIN ((s8)-128) -#define U16_MAX ((u16)65535u) -#define S16_MAX ((s16)32767) -#define S16_MIN ((s16)-32768) -#define U32_MAX ((u32)4294967295uL) -#define S32_MAX ((s32)2147483647) -#define S32_MIN ((s32)-2147483648) - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -#endif /* __STM32F10x_TYPE_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_usart.h b/bsp/stm32/library/inc/stm32f10x_usart.h deleted file mode 100644 index a774f09c6..000000000 --- a/bsp/stm32/library/inc/stm32f10x_usart.h +++ /dev/null @@ -1,253 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_usart.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* USART firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_USART_H -#define __STM32F10x_USART_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* USART Init Structure definition */ -typedef struct -{ - u32 USART_BaudRate; - u16 USART_WordLength; - u16 USART_StopBits; - u16 USART_Parity; - u16 USART_Mode; - u16 USART_HardwareFlowControl; -} USART_InitTypeDef; - -/* USART Clock Init Structure definition */ -typedef struct -{ - u16 USART_Clock; - u16 USART_CPOL; - u16 USART_CPHA; - u16 USART_LastBit; -} USART_ClockInitTypeDef; - -/* Exported constants --------------------------------------------------------*/ -#define IS_USART_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == USART1_BASE) || \ - ((*(u32*)&(PERIPH)) == USART2_BASE) || \ - ((*(u32*)&(PERIPH)) == USART3_BASE) || \ - ((*(u32*)&(PERIPH)) == UART4_BASE) || \ - ((*(u32*)&(PERIPH)) == UART5_BASE)) - -#define IS_USART_123_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == USART1_BASE) || \ - ((*(u32*)&(PERIPH)) == USART2_BASE) || \ - ((*(u32*)&(PERIPH)) == USART3_BASE)) - -#define IS_USART_1234_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == USART1_BASE) || \ - ((*(u32*)&(PERIPH)) == USART2_BASE) || \ - ((*(u32*)&(PERIPH)) == USART3_BASE) || \ - ((*(u32*)&(PERIPH)) == UART4_BASE)) - -/* USART Word Length ---------------------------------------------------------*/ -#define USART_WordLength_8b ((u16)0x0000) -#define USART_WordLength_9b ((u16)0x1000) - -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ - ((LENGTH) == USART_WordLength_9b)) - -/* USART Stop Bits -----------------------------------------------------------*/ -#define USART_StopBits_1 ((u16)0x0000) -#define USART_StopBits_0_5 ((u16)0x1000) -#define USART_StopBits_2 ((u16)0x2000) -#define USART_StopBits_1_5 ((u16)0x3000) - -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ - ((STOPBITS) == USART_StopBits_0_5) || \ - ((STOPBITS) == USART_StopBits_2) || \ - ((STOPBITS) == USART_StopBits_1_5)) -/* USART Parity --------------------------------------------------------------*/ -#define USART_Parity_No ((u16)0x0000) -#define USART_Parity_Even ((u16)0x0400) -#define USART_Parity_Odd ((u16)0x0600) - -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ - ((PARITY) == USART_Parity_Even) || \ - ((PARITY) == USART_Parity_Odd)) - -/* USART Mode ----------------------------------------------------------------*/ -#define USART_Mode_Rx ((u16)0x0004) -#define USART_Mode_Tx ((u16)0x0008) - -#define IS_USART_MODE(MODE) ((((MODE) & (u16)0xFFF3) == 0x00) && ((MODE) != (u16)0x00)) - -/* USART Hardware Flow Control -----------------------------------------------*/ -#define USART_HardwareFlowControl_None ((u16)0x0000) -#define USART_HardwareFlowControl_RTS ((u16)0x0100) -#define USART_HardwareFlowControl_CTS ((u16)0x0200) -#define USART_HardwareFlowControl_RTS_CTS ((u16)0x0300) - -#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == USART_HardwareFlowControl_None) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS) || \ - ((CONTROL) == USART_HardwareFlowControl_CTS) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) - -#define IS_USART_PERIPH_HFC(PERIPH, HFC) ((((*(u32*)&(PERIPH)) != UART4_BASE) && \ - ((*(u32*)&(PERIPH)) != UART5_BASE)) \ - || ((HFC) == USART_HardwareFlowControl_None)) - -/* USART Clock ---------------------------------------------------------------*/ -#define USART_Clock_Disable ((u16)0x0000) -#define USART_Clock_Enable ((u16)0x0800) - -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ - ((CLOCK) == USART_Clock_Enable)) - -/* USART Clock Polarity ------------------------------------------------------*/ -#define USART_CPOL_Low ((u16)0x0000) -#define USART_CPOL_High ((u16)0x0400) - -#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) - -/* USART Clock Phase ---------------------------------------------------------*/ -#define USART_CPHA_1Edge ((u16)0x0000) -#define USART_CPHA_2Edge ((u16)0x0200) -#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) - -/* USART Last Bit ------------------------------------------------------------*/ -#define USART_LastBit_Disable ((u16)0x0000) -#define USART_LastBit_Enable ((u16)0x0100) - -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ - ((LASTBIT) == USART_LastBit_Enable)) - -/* USART Interrupt definition ------------------------------------------------*/ -#define USART_IT_PE ((u16)0x0028) -#define USART_IT_TXE ((u16)0x0727) -#define USART_IT_TC ((u16)0x0626) -#define USART_IT_RXNE ((u16)0x0525) -#define USART_IT_IDLE ((u16)0x0424) -#define USART_IT_LBD ((u16)0x0846) -#define USART_IT_CTS ((u16)0x096A) -#define USART_IT_ERR ((u16)0x0060) -#define USART_IT_ORE ((u16)0x0360) -#define USART_IT_NE ((u16)0x0260) -#define USART_IT_FE ((u16)0x0160) - -#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) - -#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ - ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) - -#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) - -#define IS_USART_PERIPH_IT(PERIPH, USART_IT) ((((*(u32*)&(PERIPH)) != UART4_BASE) && \ - ((*(u32*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_IT) != USART_IT_CTS)) - -/* USART DMA Requests --------------------------------------------------------*/ -#define USART_DMAReq_Tx ((u16)0x0080) -#define USART_DMAReq_Rx ((u16)0x0040) - -#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (u16)0xFF3F) == 0x00) && ((DMAREQ) != (u16)0x00)) - -/* USART WakeUp methods ------------------------------------------------------*/ -#define USART_WakeUp_IdleLine ((u16)0x0000) -#define USART_WakeUp_AddressMark ((u16)0x0800) - -#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ - ((WAKEUP) == USART_WakeUp_AddressMark)) - -/* USART LIN Break Detection Length ------------------------------------------*/ -#define USART_LINBreakDetectLength_10b ((u16)0x0000) -#define USART_LINBreakDetectLength_11b ((u16)0x0020) - -#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ - (((LENGTH) == USART_LINBreakDetectLength_10b) || \ - ((LENGTH) == USART_LINBreakDetectLength_11b)) - -/* USART IrDA Low Power ------------------------------------------------------*/ -#define USART_IrDAMode_LowPower ((u16)0x0004) -#define USART_IrDAMode_Normal ((u16)0x0000) - -#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ - ((MODE) == USART_IrDAMode_Normal)) - -/* USART Flags ---------------------------------------------------------------*/ -#define USART_FLAG_CTS ((u16)0x0200) -#define USART_FLAG_LBD ((u16)0x0100) -#define USART_FLAG_TXE ((u16)0x0080) -#define USART_FLAG_TC ((u16)0x0040) -#define USART_FLAG_RXNE ((u16)0x0020) -#define USART_FLAG_IDLE ((u16)0x0010) -#define USART_FLAG_ORE ((u16)0x0008) -#define USART_FLAG_NE ((u16)0x0004) -#define USART_FLAG_FE ((u16)0x0002) -#define USART_FLAG_PE ((u16)0x0001) - -#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ - ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ - ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ - ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ - ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) - -#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (u16)0xFC9F) == 0x00) && ((FLAG) != (u16)0x00)) - -#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(u32*)&(PERIPH)) != UART4_BASE) &&\ - ((*(u32*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_FLAG) != USART_FLAG_CTS)) - -#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) -#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) -#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void USART_DeInit(USART_TypeDef* USARTx); -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); -void USART_StructInit(USART_InitTypeDef* USART_InitStruct); -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_ITConfig(USART_TypeDef* USARTx, u16 USART_IT, FunctionalState NewState); -void USART_DMACmd(USART_TypeDef* USARTx, u16 USART_DMAReq, FunctionalState NewState); -void USART_SetAddress(USART_TypeDef* USARTx, u8 USART_Address); -void USART_WakeUpConfig(USART_TypeDef* USARTx, u16 USART_WakeUp); -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, u16 USART_LINBreakDetectLength); -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SendData(USART_TypeDef* USARTx, u16 Data); -u16 USART_ReceiveData(USART_TypeDef* USARTx); -void USART_SendBreak(USART_TypeDef* USARTx); -void USART_SetGuardTime(USART_TypeDef* USARTx, u8 USART_GuardTime); -void USART_SetPrescaler(USART_TypeDef* USARTx, u8 USART_Prescaler); -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_IrDAConfig(USART_TypeDef* USARTx, u16 USART_IrDAMode); -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, u16 USART_FLAG); -void USART_ClearFlag(USART_TypeDef* USARTx, u16 USART_FLAG); -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, u16 USART_IT); -void USART_ClearITPendingBit(USART_TypeDef* USARTx, u16 USART_IT); - -#endif /* __STM32F10x_USART_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/inc/stm32f10x_wwdg.h b/bsp/stm32/library/inc/stm32f10x_wwdg.h deleted file mode 100644 index 2cbf3ceef..000000000 --- a/bsp/stm32/library/inc/stm32f10x_wwdg.h +++ /dev/null @@ -1,54 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_wwdg.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* WWDG firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_WWDG_H -#define __STM32F10x_WWDG_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_map.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* WWDG Prescaler */ -#define WWDG_Prescaler_1 ((u32)0x00000000) -#define WWDG_Prescaler_2 ((u32)0x00000080) -#define WWDG_Prescaler_4 ((u32)0x00000100) -#define WWDG_Prescaler_8 ((u32)0x00000180) - -#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ - ((PRESCALER) == WWDG_Prescaler_2) || \ - ((PRESCALER) == WWDG_Prescaler_4) || \ - ((PRESCALER) == WWDG_Prescaler_8)) - -#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) - -#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -void WWDG_DeInit(void); -void WWDG_SetPrescaler(u32 WWDG_Prescaler); -void WWDG_SetWindowValue(u8 WindowValue); -void WWDG_EnableIT(void); -void WWDG_SetCounter(u8 Counter); -void WWDG_Enable(u8 Counter); -FlagStatus WWDG_GetFlagStatus(void); -void WWDG_ClearFlag(void); - -#endif /* __STM32F10x_WWDG_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_adc.c b/bsp/stm32/library/src/stm32f10x_adc.c deleted file mode 100644 index 2141cffa8..000000000 --- a/bsp/stm32/library/src/stm32f10x_adc.c +++ /dev/null @@ -1,1402 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_adc.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the ADC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_adc.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ADC DISCNUM mask */ -#define CR1_DISCNUM_Reset ((u32)0xFFFF1FFF) - -/* ADC DISCEN mask */ -#define CR1_DISCEN_Set ((u32)0x00000800) -#define CR1_DISCEN_Reset ((u32)0xFFFFF7FF) - -/* ADC JAUTO mask */ -#define CR1_JAUTO_Set ((u32)0x00000400) -#define CR1_JAUTO_Reset ((u32)0xFFFFFBFF) - -/* ADC JDISCEN mask */ -#define CR1_JDISCEN_Set ((u32)0x00001000) -#define CR1_JDISCEN_Reset ((u32)0xFFFFEFFF) - -/* ADC AWDCH mask */ -#define CR1_AWDCH_Reset ((u32)0xFFFFFFE0) - -/* ADC Analog watchdog enable mode mask */ -#define CR1_AWDMode_Reset ((u32)0xFF3FFDFF) - -/* CR1 register Mask */ -#define CR1_CLEAR_Mask ((u32)0xFFF0FEFF) - -/* ADC ADON mask */ -#define CR2_ADON_Set ((u32)0x00000001) -#define CR2_ADON_Reset ((u32)0xFFFFFFFE) - -/* ADC DMA mask */ -#define CR2_DMA_Set ((u32)0x00000100) -#define CR2_DMA_Reset ((u32)0xFFFFFEFF) - -/* ADC RSTCAL mask */ -#define CR2_RSTCAL_Set ((u32)0x00000008) - -/* ADC CAL mask */ -#define CR2_CAL_Set ((u32)0x00000004) - -/* ADC SWSTART mask */ -#define CR2_SWSTART_Set ((u32)0x00400000) - -/* ADC EXTTRIG mask */ -#define CR2_EXTTRIG_Set ((u32)0x00100000) -#define CR2_EXTTRIG_Reset ((u32)0xFFEFFFFF) - -/* ADC Software start mask */ -#define CR2_EXTTRIG_SWSTART_Set ((u32)0x00500000) -#define CR2_EXTTRIG_SWSTART_Reset ((u32)0xFFAFFFFF) - -/* ADC JEXTSEL mask */ -#define CR2_JEXTSEL_Reset ((u32)0xFFFF8FFF) - -/* ADC JEXTTRIG mask */ -#define CR2_JEXTTRIG_Set ((u32)0x00008000) -#define CR2_JEXTTRIG_Reset ((u32)0xFFFF7FFF) - -/* ADC JSWSTART mask */ -#define CR2_JSWSTART_Set ((u32)0x00200000) - -/* ADC injected software start mask */ -#define CR2_JEXTTRIG_JSWSTART_Set ((u32)0x00208000) -#define CR2_JEXTTRIG_JSWSTART_Reset ((u32)0xFFDF7FFF) - -/* ADC TSPD mask */ -#define CR2_TSVREFE_Set ((u32)0x00800000) -#define CR2_TSVREFE_Reset ((u32)0xFF7FFFFF) - -/* CR2 register Mask */ -#define CR2_CLEAR_Mask ((u32)0xFFF1F7FD) - -/* ADC SQx mask */ -#define SQR3_SQ_Set ((u32)0x0000001F) -#define SQR2_SQ_Set ((u32)0x0000001F) -#define SQR1_SQ_Set ((u32)0x0000001F) - -/* SQR1 register Mask */ -#define SQR1_CLEAR_Mask ((u32)0xFF0FFFFF) - -/* ADC JSQx mask */ -#define JSQR_JSQ_Set ((u32)0x0000001F) - -/* ADC JL mask */ -#define JSQR_JL_Set ((u32)0x00300000) -#define JSQR_JL_Reset ((u32)0xFFCFFFFF) - -/* ADC SMPx mask */ -#define SMPR1_SMP_Set ((u32)0x00000007) -#define SMPR2_SMP_Set ((u32)0x00000007) - -/* ADC JDRx registers offset */ -#define JDR_Offset ((u8)0x28) - -/* ADC1 DR register base address */ -#define DR_ADDRESS ((u32)0x4001244C) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : ADC_DeInit -* Description : Deinitializes the ADCx peripheral registers to their default -* reset values. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DeInit(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - switch (*(u32*)&ADCx) - { - case ADC1_BASE: - /* Enable ADC1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); - /* Release ADC1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); - break; - - case ADC2_BASE: - /* Enable ADC2 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); - /* Release ADC2 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); - break; - - case ADC3_BASE: - /* Enable ADC3 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); - /* Release ADC3 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : ADC_Init -* Description : Initializes the ADCx peripheral according to the specified parameters -* in the ADC_InitStruct. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_InitStruct: pointer to an ADC_InitTypeDef structure that -* contains the configuration information for the specified -* ADC peripheral. -* Output : None -* Return : None -******************************************************************************/ -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) -{ - u32 tmpreg1 = 0; - u8 tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); - assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); - assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); - - /*---------------------------- ADCx CR1 Configuration -----------------*/ - /* Get the ADCx CR1 value */ - tmpreg1 = ADCx->CR1; - /* Clear DUALMOD and SCAN bits */ - tmpreg1 &= CR1_CLEAR_Mask; - /* Configure ADCx: Dual mode and scan conversion mode */ - /* Set DUALMOD bits according to ADC_Mode value */ - /* Set SCAN bit according to ADC_ScanConvMode value */ - tmpreg1 |= (u32)(ADC_InitStruct->ADC_Mode | ((u32)ADC_InitStruct->ADC_ScanConvMode << 8)); - /* Write to ADCx CR1 */ - ADCx->CR1 = tmpreg1; - - /*---------------------------- ADCx CR2 Configuration -----------------*/ - /* Get the ADCx CR2 value */ - tmpreg1 = ADCx->CR2; - /* Clear CONT, ALIGN and EXTSEL bits */ - tmpreg1 &= CR2_CLEAR_Mask; - /* Configure ADCx: external trigger event and continuous conversion mode */ - /* Set ALIGN bit according to ADC_DataAlign value */ - /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ - /* Set CONT bit according to ADC_ContinuousConvMode value */ - tmpreg1 |= (u32)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | - ((u32)ADC_InitStruct->ADC_ContinuousConvMode << 1)); - /* Write to ADCx CR2 */ - ADCx->CR2 = tmpreg1; - - /*---------------------------- ADCx SQR1 Configuration -----------------*/ - /* Get the ADCx SQR1 value */ - tmpreg1 = ADCx->SQR1; - /* Clear L bits */ - tmpreg1 &= SQR1_CLEAR_Mask; - /* Configure ADCx: regular channel sequence length */ - /* Set L bits according to ADC_NbrOfChannel value */ - tmpreg2 |= (ADC_InitStruct->ADC_NbrOfChannel - 1); - tmpreg1 |= ((u32)tmpreg2 << 20); - /* Write to ADCx SQR1 */ - ADCx->SQR1 = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_StructInit -* Description : Fills each ADC_InitStruct member with its default value. -* Input : ADC_InitStruct : pointer to an ADC_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) -{ - /* Reset ADC init structure parameters values */ - /* Initialize the ADC_Mode member */ - ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; - - /* initialize the ADC_ScanConvMode member */ - ADC_InitStruct->ADC_ScanConvMode = DISABLE; - - /* Initialize the ADC_ContinuousConvMode member */ - ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; - - /* Initialize the ADC_ExternalTrigConv member */ - ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; - - /* Initialize the ADC_DataAlign member */ - ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; - - /* Initialize the ADC_NbrOfChannel member */ - ADC_InitStruct->ADC_NbrOfChannel = 1; -} - -/******************************************************************************* -* Function Name : ADC_Cmd -* Description : Enables or disables the specified ADC peripheral. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the ADCx peripheral. This parameter -* can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the ADON bit to wake up the ADC from power down mode */ - ADCx->CR2 |= CR2_ADON_Set; - } - else - { - /* Disable the selected ADC peripheral */ - ADCx->CR2 &= CR2_ADON_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_DMACmd -* Description : Enables or disables the specified ADC DMA request. -* Input : - ADCx: where x can be 1 or 3 to select the ADC peripheral. -* Note: ADC2 hasn't a DMA capability. -* - NewState: new state of the selected ADC DMA transfer. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_DMA_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC DMA request */ - ADCx->CR2 |= CR2_DMA_Set; - } - else - { - /* Disable the selected ADC DMA request */ - ADCx->CR2 &= CR2_DMA_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_ITConfig -* Description : Enables or disables the specified ADC interrupts. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_IT: specifies the ADC interrupt sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - ADC_IT_EOC: End of conversion interrupt mask -* - ADC_IT_AWD: Analog watchdog interrupt mask -* - ADC_IT_JEOC: End of injected conversion interrupt mask -* - NewState: new state of the specified ADC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState) -{ - u8 itmask = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_ADC_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = (u8)ADC_IT; - - if (NewState != DISABLE) - { - /* Enable the selected ADC interrupts */ - ADCx->CR1 |= itmask; - } - else - { - /* Disable the selected ADC interrupts */ - ADCx->CR1 &= (~(u32)itmask); - } -} - -/******************************************************************************* -* Function Name : ADC_ResetCalibration -* Description : Resets the selected ADC calibration registers. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ResetCalibration(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Resets the selected ADC calibartion registers */ - ADCx->CR2 |= CR2_RSTCAL_Set; -} - -/******************************************************************************* -* Function Name : ADC_GetResetCalibrationStatus -* Description : Gets the selected ADC reset calibration registers status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC reset calibration registers (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of RSTCAL bit */ - if ((ADCx->CR2 & CR2_RSTCAL_Set) != (u32)RESET) - { - /* RSTCAL bit is set */ - bitstatus = SET; - } - else - { - /* RSTCAL bit is reset */ - bitstatus = RESET; - } - - /* Return the RSTCAL bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_StartCalibration -* Description : Starts the selected ADC calibration process. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_StartCalibration(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Enable the selected ADC calibration process */ - ADCx->CR2 |= CR2_CAL_Set; -} - -/******************************************************************************* -* Function Name : ADC_GetCalibrationStatus -* Description : Gets the selected ADC calibration status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC calibration (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of CAL bit */ - if ((ADCx->CR2 & CR2_CAL_Set) != (u32)RESET) - { - /* CAL bit is set: calibration on going */ - bitstatus = SET; - } - else - { - /* CAL bit is reset: end of calibration */ - bitstatus = RESET; - } - - /* Return the CAL bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_SoftwareStartConvCmd -* Description : Enables or disables the selected ADC software start conversion . -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC software start conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion on external event and start the selected - ADC conversion */ - ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; - } - else - { - /* Disable the selected ADC conversion on external event and stop the selected - ADC conversion */ - ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetSoftwareStartConvStatus -* Description : Gets the selected ADC Software start conversion Status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC software start conversion (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of SWSTART bit */ - if ((ADCx->CR2 & CR2_SWSTART_Set) != (u32)RESET) - { - /* SWSTART bit is set */ - bitstatus = SET; - } - else - { - /* SWSTART bit is reset */ - bitstatus = RESET; - } - - /* Return the SWSTART bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_DiscModeChannelCountConfig -* Description : Configures the discontinuous mode for the selected ADC regular -* group channel. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - Number: specifies the discontinuous mode regular channel -* count value. This number must be between 1 and 8. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, u8 Number) -{ - u32 tmpreg1 = 0; - u32 tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); - - /* Get the old register value */ - tmpreg1 = ADCx->CR1; - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= CR1_DISCNUM_Reset; - /* Set the discontinuous mode channel count */ - tmpreg2 = Number - 1; - tmpreg1 |= tmpreg2 << 13; - /* Store the new register value */ - ADCx->CR1 = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_DiscModeCmd -* Description : Enables or disables the discontinuous mode on regular group -* channel for the specified ADC -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC discontinuous mode -* on regular group channel. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC regular discontinuous mode */ - ADCx->CR1 |= CR1_DISCEN_Set; - } - else - { - /* Disable the selected ADC regular discontinuous mode */ - ADCx->CR1 &= CR1_DISCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_RegularChannelConfig -* Description : Configures for the selected ADC regular channel its corresponding -* rank in the sequencer and its sample time. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_Channel: the ADC channel to configure. -* This parameter can be one of the following values: -* - ADC_Channel_0: ADC Channel0 selected -* - ADC_Channel_1: ADC Channel1 selected -* - ADC_Channel_2: ADC Channel2 selected -* - ADC_Channel_3: ADC Channel3 selected -* - ADC_Channel_4: ADC Channel4 selected -* - ADC_Channel_5: ADC Channel5 selected -* - ADC_Channel_6: ADC Channel6 selected -* - ADC_Channel_7: ADC Channel7 selected -* - ADC_Channel_8: ADC Channel8 selected -* - ADC_Channel_9: ADC Channel9 selected -* - ADC_Channel_10: ADC Channel10 selected -* - ADC_Channel_11: ADC Channel11 selected -* - ADC_Channel_12: ADC Channel12 selected -* - ADC_Channel_13: ADC Channel13 selected -* - ADC_Channel_14: ADC Channel14 selected -* - ADC_Channel_15: ADC Channel15 selected -* - ADC_Channel_16: ADC Channel16 selected -* - ADC_Channel_17: ADC Channel17 selected -* - Rank: The rank in the regular group sequencer. This parameter -* must be between 1 to 16. -* - ADC_SampleTime: The sample time value to be set for the -* selected channel. -* This parameter can be one of the following values: -* - ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles -* - ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles -* - ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles -* - ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles -* - ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles -* - ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles -* - ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles -* - ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles -* Output : None -* Return : None -*******************************************************************************/ -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime) -{ - u32 tmpreg1 = 0, tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_REGULAR_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - - /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3 * (ADC_Channel - 10)); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3 * ADC_Channel); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - /* For Rank 1 to 6 */ - if (Rank < 7) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR3; - /* Calculate the mask to clear */ - tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 1)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR3 = tmpreg1; - } - /* For Rank 7 to 12 */ - else if (Rank < 13) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR2; - /* Calculate the mask to clear */ - tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 7)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR2 = tmpreg1; - } - /* For Rank 13 to 16 */ - else - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR1; - /* Calculate the mask to clear */ - tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_Channel << (5 * (Rank - 13)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR1 = tmpreg1; - } -} - -/******************************************************************************* -* Function Name : ADC_ExternalTrigConvCmd -* Description : Enables or disables the ADCx conversion through external trigger. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC external trigger -* start of conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion on external event */ - ADCx->CR2 |= CR2_EXTTRIG_Set; - } - else - { - /* Disable the selected ADC conversion on external event */ - ADCx->CR2 &= CR2_EXTTRIG_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetConversionValue -* Description : Returns the last ADCx conversion result data for regular channel. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The Data conversion value. -*******************************************************************************/ -u16 ADC_GetConversionValue(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Return the selected ADC conversion value */ - return (u16) ADCx->DR; -} - -/******************************************************************************* -* Function Name : ADC_GetDualModeConversionValue -* Description : Returns the last ADC1 and ADC2 conversion result data in dual mode. -* Output : None -* Return : The Data conversion value. -*******************************************************************************/ -u32 ADC_GetDualModeConversionValue(void) -{ - /* Return the dual mode conversion value */ - return (*(vu32 *) DR_ADDRESS); -} - -/******************************************************************************* -* Function Name : ADC_AutoInjectedConvCmd -* Description : Enables or disables the selected ADC automatic injected group -* conversion after regular one. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC auto injected -* conversion -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC automatic injected group conversion */ - ADCx->CR1 |= CR1_JAUTO_Set; - } - else - { - /* Disable the selected ADC automatic injected group conversion */ - ADCx->CR1 &= CR1_JAUTO_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_InjectedDiscModeCmd -* Description : Enables or disables the discontinuous mode for injected group -* channel for the specified ADC -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC discontinuous mode -* on injected group channel. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC injected discontinuous mode */ - ADCx->CR1 |= CR1_JDISCEN_Set; - } - else - { - /* Disable the selected ADC injected discontinuous mode */ - ADCx->CR1 &= CR1_JDISCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_ExternalTrigInjectedConvConfig -* Description : Configures the ADCx external trigger for injected channels conversion. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_ExternalTrigInjecConv: specifies the ADC trigger to -* start injected conversion. -* This parameter can be one of the following values: -* - ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event -* selected (for ADC1, ADC2 and ADC3) -* - ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture -* compare4 selected (for ADC1, ADC2 and ADC3) -* - ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event -* selected (for ADC1 and ADC2) -* - ADC_External TrigInjecConv_T2_CC1: Timer2 capture -* compare1 selected (for ADC1 and ADC2) -* - ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture -* compare4 selected (for ADC1 and ADC2) -* - ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event -* selected (for ADC1 and ADC2) -* - ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External -* interrupt line 15 or Timer8 capture compare4 event selected -* (for ADC1 and ADC2) -* - ADC_External TrigInjecConv_T4_CC3: Timer4 capture -* compare3 selected (for ADC3 only) -* - ADC_External TrigInjecConv_T8_CC2: Timer8 capture -* compare2 selected (for ADC3 only) -* - ADC_External TrigInjecConv_T8_CC4: Timer8 capture -* compare4 selected (for ADC3 only) -* - ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event -* selected (for ADC3 only) -* - ADC_External TrigInjecConv_T5_CC4: Timer5 capture -* compare4 selected (for ADC3 only) -* - ADC_ExternalTrigInjecConv_None: Injected conversion -* started by software and not by external trigger (for -* ADC1, ADC2 and ADC3) -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); - - /* Get the old register value */ - tmpreg = ADCx->CR2; - /* Clear the old external event selection for injected group */ - tmpreg &= CR2_JEXTSEL_Reset; - /* Set the external event selection for injected group */ - tmpreg |= ADC_ExternalTrigInjecConv; - /* Store the new register value */ - ADCx->CR2 = tmpreg; -} - -/******************************************************************************* -* Function Name : ADC_ExternalTrigInjectedConvCmd -* Description : Enables or disables the ADCx injected channels conversion -* through external trigger -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC external trigger -* start of injected conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC external event selection for injected group */ - ADCx->CR2 |= CR2_JEXTTRIG_Set; - } - else - { - /* Disable the selected ADC external event selection for injected group */ - ADCx->CR2 &= CR2_JEXTTRIG_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_SoftwareStartInjectedConvCmd -* Description : Enables or disables the selected ADC start of the injected -* channels conversion. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - NewState: new state of the selected ADC software start -* injected conversion. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion for injected group on external event and start the selected - ADC injected conversion */ - ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; - } - else - { - /* Disable the selected ADC conversion on external event for injected group and stop the selected - ADC injected conversion */ - ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetSoftwareStartInjectedConvCmdStatus -* Description : Gets the selected ADC Software start injected conversion Status. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* Output : None -* Return : The new state of ADC software start injected conversion (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - /* Check the status of JSWSTART bit */ - if ((ADCx->CR2 & CR2_JSWSTART_Set) != (u32)RESET) - { - /* JSWSTART bit is set */ - bitstatus = SET; - } - else - { - /* JSWSTART bit is reset */ - bitstatus = RESET; - } - - /* Return the JSWSTART bit status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_InjectedChannelConfig -* Description : Configures for the selected ADC injected channel its corresponding -* rank in the sequencer and its sample time. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_Channel: the ADC channel to configure. -* This parameter can be one of the following values: -* - ADC_Channel_0: ADC Channel0 selected -* - ADC_Channel_1: ADC Channel1 selected -* - ADC_Channel_2: ADC Channel2 selected -* - ADC_Channel_3: ADC Channel3 selected -* - ADC_Channel_4: ADC Channel4 selected -* - ADC_Channel_5: ADC Channel5 selected -* - ADC_Channel_6: ADC Channel6 selected -* - ADC_Channel_7: ADC Channel7 selected -* - ADC_Channel_8: ADC Channel8 selected -* - ADC_Channel_9: ADC Channel9 selected -* - ADC_Channel_10: ADC Channel10 selected -* - ADC_Channel_11: ADC Channel11 selected -* - ADC_Channel_12: ADC Channel12 selected -* - ADC_Channel_13: ADC Channel13 selected -* - ADC_Channel_14: ADC Channel14 selected -* - ADC_Channel_15: ADC Channel15 selected -* - ADC_Channel_16: ADC Channel16 selected -* - ADC_Channel_17: ADC Channel17 selected -* - Rank: The rank in the injected group sequencer. This parameter -* must be between 1 to 4. -* - ADC_SampleTime: The sample time value to be set for the -* selected channel. -* This parameter can be one of the following values: -* - ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles -* - ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles -* - ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles -* - ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles -* - ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles -* - ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles -* - ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles -* - ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles -* Output : None -* Return : None -*******************************************************************************/ -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime) -{ - u32 tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_INJECTED_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - - /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3*(ADC_Channel - 10)); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (u32)ADC_SampleTime << (3 * ADC_Channel); - /* Set the discontinuous mode channel count */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - - /* Rank configuration */ - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Get JL value: Number = JL+1 */ - tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; - /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = JSQR_JSQ_Set << (5 * (u8)((Rank + 3) - (tmpreg3 + 1))); - /* Clear the old JSQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = (u32)ADC_Channel << (5 * (u8)((Rank + 3) - (tmpreg3 + 1))); - /* Set the JSQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_InjectedSequencerLengthConfig -* Description : Configures the sequencer length for injected channels -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - Length: The sequencer length. -* This parameter must be a number between 1 to 4. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, u8 Length) -{ - u32 tmpreg1 = 0; - u32 tmpreg2 = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_LENGTH(Length)); - - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Clear the old injected sequnence lenght JL bits */ - tmpreg1 &= JSQR_JL_Reset; - /* Set the injected sequnence lenght JL bits */ - tmpreg2 = Length - 1; - tmpreg1 |= tmpreg2 << 20; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/******************************************************************************* -* Function Name : ADC_SetInjectedOffset -* Description : Set the injected channels conversion value offset -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_InjectedChannel: the ADC injected channel to set its -* offset. -* This parameter can be one of the following values: -* - ADC_InjectedChannel_1: Injected Channel1 selected -* - ADC_InjectedChannel_2: Injected Channel2 selected -* - ADC_InjectedChannel_3: Injected Channel3 selected -* - ADC_InjectedChannel_4: Injected Channel4 selected -* - Offset: the offset value for the selected ADC injected channel -* This parameter must be a 12bit value. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel, u16 Offset) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - assert_param(IS_ADC_OFFSET(Offset)); - - /* Set the selected injected channel data offset */ - *((vu32 *)((*(u32*)&ADCx) + ADC_InjectedChannel)) = (u32)Offset; -} - -/******************************************************************************* -* Function Name : ADC_GetInjectedConversionValue -* Description : Returns the ADC injected channel conversion result -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_InjectedChannel: the converted ADC injected channel. -* This parameter can be one of the following values: -* - ADC_InjectedChannel_1: Injected Channel1 selected -* - ADC_InjectedChannel_2: Injected Channel2 selected -* - ADC_InjectedChannel_3: Injected Channel3 selected -* - ADC_InjectedChannel_4: Injected Channel4 selected -* Output : None -* Return : The Data conversion value. -*******************************************************************************/ -u16 ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - - /* Returns the selected injected channel conversion data value */ - return (u16) (*(vu32*) (((*(u32*)&ADCx) + ADC_InjectedChannel + JDR_Offset))); -} - -/******************************************************************************* -* Function Name : ADC_AnalogWatchdogCmd -* Description : Enables or disables the analog watchdog on single/all regular -* or injected channels -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_AnalogWatchdog: the ADC analog watchdog configuration. -* This parameter can be one of the following values: -* - ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on -* a single regular channel -* - ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on -* a single injected channel -* - ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog -* watchdog on a single regular or injected channel -* - ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on -* all regular channel -* - ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on -* all injected channel -* - ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog -* on all regular and injected channels -* - ADC_AnalogWatchdog_None: No channel guarded by the -* analog watchdog -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, u32 ADC_AnalogWatchdog) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); - - /* Get the old register value */ - tmpreg = ADCx->CR1; - /* Clear AWDEN, AWDENJ and AWDSGL bits */ - tmpreg &= CR1_AWDMode_Reset; - /* Set the analog watchdog enable mode */ - tmpreg |= ADC_AnalogWatchdog; - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/******************************************************************************* -* Function Name : ADC_AnalogWatchdogThresholdsConfig -* Description : Configures the high and low thresholds of the analog watchdog. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - HighThreshold: the ADC analog watchdog High threshold value. -* This parameter must be a 12bit value. -* - LowThreshold: the ADC analog watchdog Low threshold value. -* This parameter must be a 12bit value. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, u16 HighThreshold, - u16 LowThreshold) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_THRESHOLD(HighThreshold)); - assert_param(IS_ADC_THRESHOLD(LowThreshold)); - - /* Set the ADCx high threshold */ - ADCx->HTR = HighThreshold; - /* Set the ADCx low threshold */ - ADCx->LTR = LowThreshold; -} - -/******************************************************************************* -* Function Name : ADC_AnalogWatchdogSingleChannelConfig -* Description : Configures the analog watchdog guarded single channel -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_Channel: the ADC channel to configure for the analog -* watchdog. -* This parameter can be one of the following values: -* - ADC_Channel_0: ADC Channel0 selected -* - ADC_Channel_1: ADC Channel1 selected -* - ADC_Channel_2: ADC Channel2 selected -* - ADC_Channel_3: ADC Channel3 selected -* - ADC_Channel_4: ADC Channel4 selected -* - ADC_Channel_5: ADC Channel5 selected -* - ADC_Channel_6: ADC Channel6 selected -* - ADC_Channel_7: ADC Channel7 selected -* - ADC_Channel_8: ADC Channel8 selected -* - ADC_Channel_9: ADC Channel9 selected -* - ADC_Channel_10: ADC Channel10 selected -* - ADC_Channel_11: ADC Channel11 selected -* - ADC_Channel_12: ADC Channel12 selected -* - ADC_Channel_13: ADC Channel13 selected -* - ADC_Channel_14: ADC Channel14 selected -* - ADC_Channel_15: ADC Channel15 selected -* - ADC_Channel_16: ADC Channel16 selected -* - ADC_Channel_17: ADC Channel17 selected -* Output : None -* Return : None -*******************************************************************************/ -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - - /* Get the old register value */ - tmpreg = ADCx->CR1; - /* Clear the Analog watchdog channel select bits */ - tmpreg &= CR1_AWDCH_Reset; - /* Set the Analog watchdog channel */ - tmpreg |= ADC_Channel; - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/******************************************************************************* -* Function Name : ADC_TempSensorVrefintCmd -* Description : Enables or disables the temperature sensor and Vrefint channel. -* Input : - NewState: new state of the temperature sensor. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void ADC_TempSensorVrefintCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the temperature sensor and Vrefint channel*/ - ADC1->CR2 |= CR2_TSVREFE_Set; - } - else - { - /* Disable the temperature sensor and Vrefint channel*/ - ADC1->CR2 &= CR2_TSVREFE_Reset; - } -} - -/******************************************************************************* -* Function Name : ADC_GetFlagStatus -* Description : Checks whether the specified ADC flag is set or not. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - ADC_FLAG_AWD: Analog watchdog flag -* - ADC_FLAG_EOC: End of conversion flag -* - ADC_FLAG_JEOC: End of injected group conversion flag -* - ADC_FLAG_JSTRT: Start of injected group conversion flag -* - ADC_FLAG_STRT: Start of regular group conversion flag -* Output : None -* Return : The new state of ADC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, u8 ADC_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); - - /* Check the status of the specified ADC flag */ - if ((ADCx->SR & ADC_FLAG) != (u8)RESET) - { - /* ADC_FLAG is set */ - bitstatus = SET; - } - else - { - /* ADC_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the ADC_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_ClearFlag -* Description : Clears the ADCx's pending flags. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - ADC_FLAG_AWD: Analog watchdog flag -* - ADC_FLAG_EOC: End of conversion flag -* - ADC_FLAG_JEOC: End of injected group conversion flag -* - ADC_FLAG_JSTRT: Start of injected group conversion flag -* - ADC_FLAG_STRT: Start of regular group conversion flag -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ClearFlag(ADC_TypeDef* ADCx, u8 ADC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); - - /* Clear the selected ADC flags */ - ADCx->SR = ~(u32)ADC_FLAG; -} - -/******************************************************************************* -* Function Name : ADC_GetITStatus -* Description : Checks whether the specified ADC interrupt has occurred or not. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_IT: specifies the ADC interrupt source to check. -* This parameter can be one of the following values: -* - ADC_IT_EOC: End of conversion interrupt mask -* - ADC_IT_AWD: Analog watchdog interrupt mask -* - ADC_IT_JEOC: End of injected conversion interrupt mask -* Output : None -* Return : The new state of ADC_IT (SET or RESET). -*******************************************************************************/ -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, u16 ADC_IT) -{ - ITStatus bitstatus = RESET; - u32 itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = ADC_IT >> 8; - - /* Get the ADC_IT enable bit status */ - enablestatus = (ADCx->CR1 & (u8)ADC_IT) ; - - /* Check the status of the specified ADC interrupt */ - if (((ADCx->SR & itmask) != (u32)RESET) && enablestatus) - { - /* ADC_IT is set */ - bitstatus = SET; - } - else - { - /* ADC_IT is reset */ - bitstatus = RESET; - } - - /* Return the ADC_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : ADC_ClearITPendingBit -* Description : Clears the ADCx’s interrupt pending bits. -* Input : - ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. -* - ADC_IT: specifies the ADC interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - ADC_IT_EOC: End of conversion interrupt mask -* - ADC_IT_AWD: Analog watchdog interrupt mask -* - ADC_IT_JEOC: End of injected conversion interrupt mask -* Output : None -* Return : None -*******************************************************************************/ -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, u16 ADC_IT) -{ - u8 itmask = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_IT(ADC_IT)); - - /* Get the ADC IT index */ - itmask = (u8)(ADC_IT >> 8); - - /* Clear the selected ADC interrupt pending bits */ - ADCx->SR = ~(u32)itmask; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_bkp.c b/bsp/stm32/library/src/stm32f10x_bkp.c deleted file mode 100644 index 1655c32d2..000000000 --- a/bsp/stm32/library/src/stm32f10x_bkp.c +++ /dev/null @@ -1,272 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_bkp.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the BKP firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_bkp.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ BKP registers bit address in the alias region ----------- */ -#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ -/* Alias word address of TPAL bit */ -#define CR_OFFSET (BKP_OFFSET + 0x30) -#define TPAL_BitNumber 0x01 -#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) - -/* Alias word address of TPE bit */ -#define TPE_BitNumber 0x00 -#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of TPIE bit */ -#define CSR_OFFSET (BKP_OFFSET + 0x34) -#define TPIE_BitNumber 0x02 -#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) - -/* Alias word address of TIF bit */ -#define TIF_BitNumber 0x09 -#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) - -/* Alias word address of TEF bit */ -#define TEF_BitNumber 0x08 -#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) - - -/* ---------------------- BKP registers bit mask ------------------------ */ -/* RTCCR register bit mask */ -#define RTCCR_CAL_Mask ((u16)0xFF80) -#define RTCCR_Mask ((u16)0xFC7F) - -/* CSR register bit mask */ -#define CSR_CTE_Set ((u16)0x0001) -#define CSR_CTI_Set ((u16)0x0002) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : BKP_DeInit -* Description : Deinitializes the BKP peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BKP_DeInit(void) -{ - RCC_BackupResetCmd(ENABLE); - RCC_BackupResetCmd(DISABLE); -} - -/******************************************************************************* -* Function Name : BKP_TamperPinLevelConfig -* Description : Configures the Tamper Pin active level. -* Input : - BKP_TamperPinLevel: specifies the Tamper Pin active level. -* This parameter can be one of the following values: -* - BKP_TamperPinLevel_High: Tamper pin active on high level -* - BKP_TamperPinLevel_Low: Tamper pin active on low level -* Output : None -* Return : None -*******************************************************************************/ -void BKP_TamperPinLevelConfig(u16 BKP_TamperPinLevel) -{ - /* Check the parameters */ - assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); - - *(vu32 *) CR_TPAL_BB = BKP_TamperPinLevel; -} - -/******************************************************************************* -* Function Name : BKP_TamperPinCmd -* Description : Enables or disables the Tamper Pin activation. -* Input : - NewState: new state of the Tamper Pin activation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_TamperPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_TPE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : BKP_ITConfig -* Description : Enables or disables the Tamper Pin Interrupt. -* Input : - NewState: new state of the Tamper Pin Interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CSR_TPIE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : BKP_RTCOutputConfig -* Description : Select the RTC output source to output on the Tamper pin. -* Input : - BKP_RTCOutputSource: specifies the RTC output source. -* This parameter can be one of the following values: -* - BKP_RTCOutputSource_None: no RTC output on the Tamper pin. -* - BKP_RTCOutputSource_CalibClock: output the RTC clock -* with frequency divided by 64 on the Tamper pin. -* - BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse -* signal on the Tamper pin. -* - BKP_RTCOutputSource_Second: output the RTC Second pulse -* signal on the Tamper pin. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_RTCOutputConfig(u16 BKP_RTCOutputSource) -{ - u16 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); - - tmpreg = BKP->RTCCR; - - /* Clear CCO, ASOE and ASOS bits */ - tmpreg &= RTCCR_Mask; - - /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ - tmpreg |= BKP_RTCOutputSource; - - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/******************************************************************************* -* Function Name : BKP_SetRTCCalibrationValue -* Description : Sets RTC Clock Calibration value. -* Input : - CalibrationValue: specifies the RTC Clock Calibration value. -* This parameter must be a number between 0 and 0x7F. -* Output : None -* Return : None -*******************************************************************************/ -void BKP_SetRTCCalibrationValue(u8 CalibrationValue) -{ - u16 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); - - tmpreg = BKP->RTCCR; - - /* Clear CAL[6:0] bits */ - tmpreg &= RTCCR_CAL_Mask; - - /* Set CAL[6:0] bits according to CalibrationValue value */ - tmpreg |= CalibrationValue; - - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/******************************************************************************* -* Function Name : BKP_WriteBackupRegister -* Description : Writes user data to the specified Data Backup Register. -* Input : - BKP_DR: specifies the Data Backup Register. -* This parameter can be BKP_DRx where x:[1, 42] -* - Data: data to write -* Output : None -* Return : None -*******************************************************************************/ -void BKP_WriteBackupRegister(u16 BKP_DR, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - *(vu16 *) (BKP_BASE + BKP_DR) = Data; -} - -/******************************************************************************* -* Function Name : BKP_ReadBackupRegister -* Description : Reads data from the specified Data Backup Register. -* Input : - BKP_DR: specifies the Data Backup Register. -* This parameter can be BKP_DRx where x:[1, 42] -* Output : None -* Return : The content of the specified Data Backup Register -*******************************************************************************/ -u16 BKP_ReadBackupRegister(u16 BKP_DR) -{ - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - return (*(vu16 *) (BKP_BASE + BKP_DR)); -} - -/******************************************************************************* -* Function Name : BKP_GetFlagStatus -* Description : Checks whether the Tamper Pin Event flag is set or not. -* Input : None -* Output : None -* Return : The new state of the Tamper Pin Event flag (SET or RESET). -*******************************************************************************/ -FlagStatus BKP_GetFlagStatus(void) -{ - return (FlagStatus)(*(vu32 *) CSR_TEF_BB); -} - -/******************************************************************************* -* Function Name : BKP_ClearFlag -* Description : Clears Tamper Pin Event pending flag. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BKP_ClearFlag(void) -{ - /* Set CTE bit to clear Tamper Pin Event flag */ - BKP->CSR |= CSR_CTE_Set; -} - -/******************************************************************************* -* Function Name : BKP_GetITStatus -* Description : Checks whether the Tamper Pin Interrupt has occurred or not. -* Input : None -* Output : None -* Return : The new state of the Tamper Pin Interrupt (SET or RESET). -*******************************************************************************/ -ITStatus BKP_GetITStatus(void) -{ - return (ITStatus)(*(vu32 *) CSR_TIF_BB); -} - -/******************************************************************************* -* Function Name : BKP_ClearITPendingBit -* Description : Clears Tamper Pin Interrupt pending bit. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BKP_ClearITPendingBit(void) -{ - /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ - BKP->CSR |= CSR_CTI_Set; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_can.c b/bsp/stm32/library/src/stm32f10x_can.c deleted file mode 100644 index 5a959b2ea..000000000 --- a/bsp/stm32/library/src/stm32f10x_can.c +++ /dev/null @@ -1,907 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_can.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the CAN firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_can.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ - -/* Private define ------------------------------------------------------------*/ -/* CAN Master Control Register bits */ -#define MCR_INRQ ((u32)0x00000001) /* Initialization request */ -#define MCR_SLEEP ((u32)0x00000002) /* Sleep mode request */ -#define MCR_TXFP ((u32)0x00000004) /* Transmit FIFO priority */ -#define MCR_RFLM ((u32)0x00000008) /* Receive FIFO locked mode */ -#define MCR_NART ((u32)0x00000010) /* No automatic retransmission */ -#define MCR_AWUM ((u32)0x00000020) /* Automatic wake up mode */ -#define MCR_ABOM ((u32)0x00000040) /* Automatic bus-off management */ -#define MCR_TTCM ((u32)0x00000080) /* time triggered communication */ - -/* CAN Master Status Register bits */ -#define MSR_INAK ((u32)0x00000001) /* Initialization acknowledge */ -#define MSR_WKUI ((u32)0x00000008) /* Wake-up interrupt */ -#define MSR_SLAKI ((u32)0x00000010) /* Sleep acknowledge interrupt */ - -/* CAN Transmit Status Register bits */ -#define TSR_RQCP0 ((u32)0x00000001) /* Request completed mailbox0 */ -#define TSR_TXOK0 ((u32)0x00000002) /* Transmission OK of mailbox0 */ -#define TSR_ABRQ0 ((u32)0x00000080) /* Abort request for mailbox0 */ -#define TSR_RQCP1 ((u32)0x00000100) /* Request completed mailbox1 */ -#define TSR_TXOK1 ((u32)0x00000200) /* Transmission OK of mailbox1 */ -#define TSR_ABRQ1 ((u32)0x00008000) /* Abort request for mailbox1 */ -#define TSR_RQCP2 ((u32)0x00010000) /* Request completed mailbox2 */ -#define TSR_TXOK2 ((u32)0x00020000) /* Transmission OK of mailbox2 */ -#define TSR_ABRQ2 ((u32)0x00800000) /* Abort request for mailbox2 */ -#define TSR_TME0 ((u32)0x04000000) /* Transmit mailbox 0 empty */ -#define TSR_TME1 ((u32)0x08000000) /* Transmit mailbox 1 empty */ -#define TSR_TME2 ((u32)0x10000000) /* Transmit mailbox 2 empty */ - -/* CAN Receive FIFO 0 Register bits */ -#define RF0R_FULL0 ((u32)0x00000008) /* FIFO 0 full */ -#define RF0R_FOVR0 ((u32)0x00000010) /* FIFO 0 overrun */ -#define RF0R_RFOM0 ((u32)0x00000020) /* Release FIFO 0 output mailbox */ - -/* CAN Receive FIFO 1 Register bits */ -#define RF1R_FULL1 ((u32)0x00000008) /* FIFO 1 full */ -#define RF1R_FOVR1 ((u32)0x00000010) /* FIFO 1 overrun */ -#define RF1R_RFOM1 ((u32)0x00000020) /* Release FIFO 1 output mailbox */ - -/* CAN Error Status Register bits */ -#define ESR_EWGF ((u32)0x00000001) /* Error warning flag */ -#define ESR_EPVF ((u32)0x00000002) /* Error passive flag */ -#define ESR_BOFF ((u32)0x00000004) /* Bus-off flag */ - -/* CAN Mailbox Transmit Request */ -#define TMIDxR_TXRQ ((u32)0x00000001) /* Transmit mailbox request */ - -/* CAN Filter Master Register bits */ -#define FMR_FINIT ((u32)0x00000001) /* Filter init mode */ - - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static ITStatus CheckITStatus(u32 CAN_Reg, u32 It_Bit); - -/* Private functions ---------------------------------------------------------*/ -/******************************************************************************* -* Function Name : CAN_DeInit -* Description : Deinitializes the CAN peripheral registers to their default -* reset values. -* Input : None. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_DeInit(void) -{ - /* Enable CAN reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN, ENABLE); - /* Release CAN from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN, DISABLE); -} - -/******************************************************************************* -* Function Name : CAN_Init -* Description : Initializes the CAN peripheral according to the specified -* parameters in the CAN_InitStruct. -* Input : CAN_InitStruct: pointer to a CAN_InitTypeDef structure that - contains the configuration information for the CAN peripheral. -* Output : None. -* Return : Constant indicates initialization succeed which will be -* CANINITFAILED or CANINITOK. -*******************************************************************************/ -u8 CAN_Init(CAN_InitTypeDef* CAN_InitStruct) -{ - u8 InitStatus = 0; - u16 WaitAck = 0; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); - assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); - assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); - assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); - assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); - assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); - - /* Request initialisation */ - CAN->MCR = MCR_INRQ; - - /* ...and check acknowledged */ - if ((CAN->MSR & MSR_INAK) == 0) - { - InitStatus = CANINITFAILED; - } - else - { - /* Set the time triggered communication mode */ - if (CAN_InitStruct->CAN_TTCM == ENABLE) - { - CAN->MCR |= MCR_TTCM; - } - else - { - CAN->MCR &= ~MCR_TTCM; - } - - /* Set the automatic bus-off management */ - if (CAN_InitStruct->CAN_ABOM == ENABLE) - { - CAN->MCR |= MCR_ABOM; - } - else - { - CAN->MCR &= ~MCR_ABOM; - } - - /* Set the automatic wake-up mode */ - if (CAN_InitStruct->CAN_AWUM == ENABLE) - { - CAN->MCR |= MCR_AWUM; - } - else - { - CAN->MCR &= ~MCR_AWUM; - } - - /* Set the no automatic retransmission */ - if (CAN_InitStruct->CAN_NART == ENABLE) - { - CAN->MCR |= MCR_NART; - } - else - { - CAN->MCR &= ~MCR_NART; - } - - /* Set the receive FIFO locked mode */ - if (CAN_InitStruct->CAN_RFLM == ENABLE) - { - CAN->MCR |= MCR_RFLM; - } - else - { - CAN->MCR &= ~MCR_RFLM; - } - - /* Set the transmit FIFO priority */ - if (CAN_InitStruct->CAN_TXFP == ENABLE) - { - CAN->MCR |= MCR_TXFP; - } - else - { - CAN->MCR &= ~MCR_TXFP; - } - - /* Set the bit timing register */ - CAN->BTR = (u32)((u32)CAN_InitStruct->CAN_Mode << 30) | ((u32)CAN_InitStruct->CAN_SJW << 24) | - ((u32)CAN_InitStruct->CAN_BS1 << 16) | ((u32)CAN_InitStruct->CAN_BS2 << 20) | - ((u32)CAN_InitStruct->CAN_Prescaler - 1); - - InitStatus = CANINITOK; - - /* Request leave initialisation */ - CAN->MCR &= ~MCR_INRQ; - - /* Wait the acknowledge */ - for(WaitAck = 0x400; WaitAck > 0x0; WaitAck--) - { - } - - /* ...and check acknowledged */ - if ((CAN->MSR & MSR_INAK) == MSR_INAK) - { - InitStatus = CANINITFAILED; - } - } - - /* At this step, return the status of initialization */ - return InitStatus; -} - -/******************************************************************************* -* Function Name : CAN_FilterInit -* Description : Initializes the CAN peripheral according to the specified -* parameters in the CAN_FilterInitStruct. -* Input : CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef -* structure that contains the configuration information. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) -{ - u16 FilterNumber_BitPos = 0; - - /* Check the parameters */ - assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); - assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); - assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); - assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); - assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); - - FilterNumber_BitPos = - (u16)(((u16)0x0001) << ((u16)CAN_FilterInitStruct->CAN_FilterNumber)); - - /* Initialisation mode for the filter */ - CAN->FMR |= FMR_FINIT; - - /* Filter Deactivation */ - CAN->FA1R &= ~(u32)FilterNumber_BitPos; - - /* Filter Scale */ - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) - { - /* 16-bit scale for the filter */ - CAN->FS1R &= ~(u32)FilterNumber_BitPos; - - /* First 16-bit identifier and First 16-bit mask */ - /* Or First 16-bit identifier and Second 16-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdLow); - - /* Second 16-bit identifier and Second 16-bit mask */ - /* Or Third 16-bit identifier and Fourth 16-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdHigh); - } - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) - { - /* 32-bit scale for the filter */ - CAN->FS1R |= FilterNumber_BitPos; - - /* 32-bit identifier or First 32-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterIdLow); - - /* 32-bit mask or Second 32-bit identifier */ - CAN->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((u32)((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - ((u32)0x0000FFFF & CAN_FilterInitStruct->CAN_FilterMaskIdLow); - - } - - /* Filter Mode */ - if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) - { - /*Id/Mask mode for the filter*/ - CAN->FM1R &= ~(u32)FilterNumber_BitPos; - } - else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ - { - /*Identifier list mode for the filter*/ - CAN->FM1R |= (u32)FilterNumber_BitPos; - } - - /* Filter FIFO assignment */ - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_FilterFIFO0) - { - /* FIFO 0 assignation for the filter */ - CAN->FFA1R &= ~(u32)FilterNumber_BitPos; - } - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_FilterFIFO1) - { - /* FIFO 1 assignation for the filter */ - CAN->FFA1R |= (u32)FilterNumber_BitPos; - } - - /* Filter activation */ - if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) - { - CAN->FA1R |= FilterNumber_BitPos; - } - - /* Leave the initialisation mode for the filter */ - CAN->FMR &= ~FMR_FINIT; -} - -/******************************************************************************* -* Function Name : CAN_StructInit -* Description : Fills each CAN_InitStruct member with its default value. -* Input : CAN_InitStruct: pointer to a CAN_InitTypeDef structure which -* will be initialized. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) -{ - /* Reset CAN init structure parameters values */ - - /* Initialize the time triggered communication mode */ - CAN_InitStruct->CAN_TTCM = DISABLE; - - /* Initialize the automatic bus-off management */ - CAN_InitStruct->CAN_ABOM = DISABLE; - - /* Initialize the automatic wake-up mode */ - CAN_InitStruct->CAN_AWUM = DISABLE; - - /* Initialize the no automatic retransmission */ - CAN_InitStruct->CAN_NART = DISABLE; - - /* Initialize the receive FIFO locked mode */ - CAN_InitStruct->CAN_RFLM = DISABLE; - - /* Initialize the transmit FIFO priority */ - CAN_InitStruct->CAN_TXFP = DISABLE; - - /* Initialize the CAN_Mode member */ - CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; - - /* Initialize the CAN_SJW member */ - CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; - - /* Initialize the CAN_BS1 member */ - CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; - - /* Initialize the CAN_BS2 member */ - CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; - - /* Initialize the CAN_Prescaler member */ - CAN_InitStruct->CAN_Prescaler = 1; -} - -/******************************************************************************* -* Function Name : CAN_ITConfig -* Description : Enables or disables the specified CAN interrupts. -* Input : - CAN_IT: specifies the CAN interrupt sources to be enabled or -* disabled. -* This parameter can be: CAN_IT_TME, CAN_IT_FMP0, CAN_IT_FF0, -* CAN_IT_FOV0, CAN_IT_FMP1, CAN_IT_FF1, -* CAN_IT_FOV1, CAN_IT_EWG, CAN_IT_EPV, -* CAN_IT_LEC, CAN_IT_ERR, CAN_IT_WKU or -* CAN_IT_SLK. -* - NewState: new state of the CAN interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_ITConfig(u32 CAN_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ITConfig(CAN_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected CAN interrupt */ - CAN->IER |= CAN_IT; - } - else - { - /* Disable the selected CAN interrupt */ - CAN->IER &= ~CAN_IT; - } -} - -/******************************************************************************* -* Function Name : CAN_Transmit -* Description : Initiates the transmission of a message. -* Input : TxMessage: pointer to a structure which contains CAN Id, CAN -* DLC and CAN datas. -* Output : None. -* Return : The number of the mailbox that is used for transmission -* or CAN_NO_MB if there is no empty mailbox. -*******************************************************************************/ -u8 CAN_Transmit(CanTxMsg* TxMessage) -{ - u8 TransmitMailbox = 0; - - /* Check the parameters */ - assert_param(IS_CAN_STDID(TxMessage->StdId)); - assert_param(IS_CAN_EXTID(TxMessage->StdId)); - assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); - assert_param(IS_CAN_RTR(TxMessage->RTR)); - assert_param(IS_CAN_DLC(TxMessage->DLC)); - - /* Select one empty transmit mailbox */ - if ((CAN->TSR&TSR_TME0) == TSR_TME0) - { - TransmitMailbox = 0; - } - else if ((CAN->TSR&TSR_TME1) == TSR_TME1) - { - TransmitMailbox = 1; - } - else if ((CAN->TSR&TSR_TME2) == TSR_TME2) - { - TransmitMailbox = 2; - } - else - { - TransmitMailbox = CAN_NO_MB; - } - - if (TransmitMailbox != CAN_NO_MB) - { - /* Set up the Id */ - CAN->sTxMailBox[TransmitMailbox].TIR &= TMIDxR_TXRQ; - if (TxMessage->IDE == CAN_ID_STD) - { - TxMessage->StdId &= (u32)0x000007FF; - TxMessage->StdId = TxMessage->StdId << 21; - - CAN->sTxMailBox[TransmitMailbox].TIR |= (TxMessage->StdId | TxMessage->IDE | - TxMessage->RTR); - } - else - { - TxMessage->ExtId &= (u32)0x1FFFFFFF; - TxMessage->ExtId <<= 3; - - CAN->sTxMailBox[TransmitMailbox].TIR |= (TxMessage->ExtId | TxMessage->IDE | - TxMessage->RTR); - } - - /* Set up the DLC */ - TxMessage->DLC &= (u8)0x0000000F; - CAN->sTxMailBox[TransmitMailbox].TDTR &= (u32)0xFFFFFFF0; - CAN->sTxMailBox[TransmitMailbox].TDTR |= TxMessage->DLC; - - /* Set up the data field */ - CAN->sTxMailBox[TransmitMailbox].TDLR = (((u32)TxMessage->Data[3] << 24) | - ((u32)TxMessage->Data[2] << 16) | - ((u32)TxMessage->Data[1] << 8) | - ((u32)TxMessage->Data[0])); - CAN->sTxMailBox[TransmitMailbox].TDHR = (((u32)TxMessage->Data[7] << 24) | - ((u32)TxMessage->Data[6] << 16) | - ((u32)TxMessage->Data[5] << 8) | - ((u32)TxMessage->Data[4])); - - /* Request transmission */ - CAN->sTxMailBox[TransmitMailbox].TIR |= TMIDxR_TXRQ; - } - - return TransmitMailbox; -} - -/******************************************************************************* -* Function Name : CAN_TransmitStatus -* Description : Checks the transmission of a message. -* Input : TransmitMailbox: the number of the mailbox that is used for -* transmission. -* Output : None. -* Return : CANTXOK if the CAN driver transmits the message, CANTXFAILED -* in an other case. -*******************************************************************************/ -u8 CAN_TransmitStatus(u8 TransmitMailbox) -{ - /* RQCP, TXOK and TME bits */ - u8 State = 0; - - /* Check the parameters */ - assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); - - switch (TransmitMailbox) - { - case (0): State |= (u8)((CAN->TSR & TSR_RQCP0) << 2); - State |= (u8)((CAN->TSR & TSR_TXOK0) >> 0); - State |= (u8)((CAN->TSR & TSR_TME0) >> 26); - break; - case (1): State |= (u8)((CAN->TSR & TSR_RQCP1) >> 6); - State |= (u8)((CAN->TSR & TSR_TXOK1) >> 8); - State |= (u8)((CAN->TSR & TSR_TME1) >> 27); - break; - case (2): State |= (u8)((CAN->TSR & TSR_RQCP2) >> 14); - State |= (u8)((CAN->TSR & TSR_TXOK2) >> 16); - State |= (u8)((CAN->TSR & TSR_TME2) >> 28); - break; - default: - State = CANTXFAILED; - break; - } - - switch (State) - { - /* transmit pending */ - case (0x0): State = CANTXPENDING; - break; - /* transmit failed */ - case (0x5): State = CANTXFAILED; - break; - /* transmit succedeed */ - case (0x7): State = CANTXOK; - break; - default: - State = CANTXFAILED; - break; - } - - return State; -} - -/******************************************************************************* -* Function Name : CAN_CancelTransmit -* Description : Cancels a transmit request. -* Input : Mailbox number. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_CancelTransmit(u8 Mailbox) -{ - /* Check the parameters */ - assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); - - /* abort transmission */ - switch (Mailbox) - { - case (0): CAN->TSR |= TSR_ABRQ0; - break; - case (1): CAN->TSR |= TSR_ABRQ1; - break; - case (2): CAN->TSR |= TSR_ABRQ2; - break; - default: - break; - } -} - -/******************************************************************************* -* Function Name : CAN_FIFORelease -* Description : Releases a FIFO. -* Input : FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_FIFORelease(u8 FIFONumber) -{ - /* Check the parameters */ - assert_param(IS_CAN_FIFO(FIFONumber)); - - /* Release FIFO0 */ - if (FIFONumber == CAN_FIFO0) - { - CAN->RF0R = RF0R_RFOM0; - } - /* Release FIFO1 */ - else /* FIFONumber == CAN_FIFO1 */ - { - CAN->RF1R = RF1R_RFOM1; - } -} - -/******************************************************************************* -* Function Name : CAN_MessagePending -* Description : Returns the number of pending messages. -* Input : FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. -* Output : None. -* Return : NbMessage which is the number of pending message. -*******************************************************************************/ -u8 CAN_MessagePending(u8 FIFONumber) -{ - u8 MessagePending=0; - - /* Check the parameters */ - assert_param(IS_CAN_FIFO(FIFONumber)); - - if (FIFONumber == CAN_FIFO0) - { - MessagePending = (u8)(CAN->RF0R&(u32)0x03); - } - else if (FIFONumber == CAN_FIFO1) - { - MessagePending = (u8)(CAN->RF1R&(u32)0x03); - } - else - { - MessagePending = 0; - } - return MessagePending; -} - -/******************************************************************************* -* Function Name : CAN_Receive -* Description : Receives a message. -* Input : FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. -* Output : RxMessage: pointer to a structure which contains CAN Id, -* CAN DLC, CAN datas and FMI number. -* Return : None. -*******************************************************************************/ -void CAN_Receive(u8 FIFONumber, CanRxMsg* RxMessage) -{ - /* Check the parameters */ - assert_param(IS_CAN_FIFO(FIFONumber)); - - /* Get the Id */ - RxMessage->IDE = (u8)0x04 & CAN->sFIFOMailBox[FIFONumber].RIR; - if (RxMessage->IDE == CAN_ID_STD) - { - RxMessage->StdId = (u32)0x000007FF & (CAN->sFIFOMailBox[FIFONumber].RIR >> 21); - } - else - { - RxMessage->ExtId = (u32)0x1FFFFFFF & (CAN->sFIFOMailBox[FIFONumber].RIR >> 3); - } - - RxMessage->RTR = (u8)0x02 & CAN->sFIFOMailBox[FIFONumber].RIR; - - /* Get the DLC */ - RxMessage->DLC = (u8)0x0F & CAN->sFIFOMailBox[FIFONumber].RDTR; - - /* Get the FMI */ - RxMessage->FMI = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDTR >> 8); - - /* Get the data field */ - RxMessage->Data[0] = (u8)0xFF & CAN->sFIFOMailBox[FIFONumber].RDLR; - RxMessage->Data[1] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDLR >> 8); - RxMessage->Data[2] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDLR >> 16); - RxMessage->Data[3] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDLR >> 24); - - RxMessage->Data[4] = (u8)0xFF & CAN->sFIFOMailBox[FIFONumber].RDHR; - RxMessage->Data[5] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDHR >> 8); - RxMessage->Data[6] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDHR >> 16); - RxMessage->Data[7] = (u8)0xFF & (CAN->sFIFOMailBox[FIFONumber].RDHR >> 24); - - /* Release the FIFO */ - CAN_FIFORelease(FIFONumber); -} - -/******************************************************************************* -* Function Name : CAN_Sleep -* Description : Enters the low power mode. -* Input : None. -* Output : None. -* Return : CANSLEEPOK if sleep entered, CANSLEEPFAILED in an other case. -*******************************************************************************/ -u8 CAN_Sleep(void) -{ - u8 SleepStatus = 0; - - /* Sleep mode entering request */ - CAN->MCR |= MCR_SLEEP; - SleepStatus = CANSLEEPOK; - - /* Sleep mode status */ - if ((CAN->MCR&MCR_SLEEP) == 0) - { - /* Sleep mode not entered */ - SleepStatus = CANSLEEPFAILED; - } - - /* At this step, sleep mode status */ - return SleepStatus; -} - -/******************************************************************************* -* Function Name : CAN_WakeUp -* Description : Wakes the CAN up. -* Input : None. -* Output : None. -* Return : CANWAKEUPOK if sleep mode left, CANWAKEUPFAILED in an other -* case. -*******************************************************************************/ -u8 CAN_WakeUp(void) -{ - u8 WakeUpStatus = 0; - - /* Wake up request */ - CAN->MCR &= ~MCR_SLEEP; - WakeUpStatus = CANWAKEUPFAILED; - - /* Sleep mode status */ - if ((CAN->MCR&MCR_SLEEP) == 0) - { - /* Sleep mode exited */ - WakeUpStatus = CANWAKEUPOK; - } - - /* At this step, sleep mode status */ - return WakeUpStatus; -} - -/******************************************************************************* -* Function Name : CAN_GetFlagStatus -* Description : Checks whether the specified CAN flag is set or not. -* Input : CAN_FLAG: specifies the flag to check. -* This parameter can be: CAN_FLAG_EWG, CAN_FLAG_EPV or -* CAN_FLAG_BOF. -* Output : None. -* Return : The new state of CAN_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus CAN_GetFlagStatus(u32 CAN_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_CAN_FLAG(CAN_FLAG)); - - /* Check the status of the specified CAN flag */ - if ((CAN->ESR & CAN_FLAG) != (u32)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - /* Return the CAN_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : CAN_ClearFlag -* Description : Clears the CAN's pending flags. -* Input : CAN_FLAG: specifies the flag to clear. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_ClearFlag(u32 CAN_FLAG) -{ - /* Check the parameters */ - assert_param(IS_CAN_FLAG(CAN_FLAG)); - - /* Clear the selected CAN flags */ - CAN->ESR &= ~CAN_FLAG; -} - -/******************************************************************************* -* Function Name : CAN_GetITStatus -* Description : Checks whether the specified CAN interrupt has occurred or -* not. -* Input : CAN_IT: specifies the CAN interrupt source to check. -* This parameter can be: CAN_IT_RQCP0, CAN_IT_RQCP1, CAN_IT_RQCP2, -* CAN_IT_FF0, CAN_IT_FOV0, CAN_IT_FF1, -* CAN_IT_FOV1, CAN_IT_EWG, CAN_IT_EPV, -* CAN_IT_BOF, CAN_IT_WKU or CAN_IT_SLK. -* Output : None. -* Return : The new state of CAN_IT (SET or RESET). -*******************************************************************************/ -ITStatus CAN_GetITStatus(u32 CAN_IT) -{ - ITStatus pendingbitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_CAN_ITStatus(CAN_IT)); - - switch (CAN_IT) - { - case CAN_IT_RQCP0: - pendingbitstatus = CheckITStatus(CAN->TSR, TSR_RQCP0); - break; - case CAN_IT_RQCP1: - pendingbitstatus = CheckITStatus(CAN->TSR, TSR_RQCP1); - break; - case CAN_IT_RQCP2: - pendingbitstatus = CheckITStatus(CAN->TSR, TSR_RQCP2); - break; - case CAN_IT_FF0: - pendingbitstatus = CheckITStatus(CAN->RF0R, RF0R_FULL0); - break; - case CAN_IT_FOV0: - pendingbitstatus = CheckITStatus(CAN->RF0R, RF0R_FOVR0); - break; - case CAN_IT_FF1: - pendingbitstatus = CheckITStatus(CAN->RF1R, RF1R_FULL1); - break; - case CAN_IT_FOV1: - pendingbitstatus = CheckITStatus(CAN->RF1R, RF1R_FOVR1); - break; - case CAN_IT_EWG: - pendingbitstatus = CheckITStatus(CAN->ESR, ESR_EWGF); - break; - case CAN_IT_EPV: - pendingbitstatus = CheckITStatus(CAN->ESR, ESR_EPVF); - break; - case CAN_IT_BOF: - pendingbitstatus = CheckITStatus(CAN->ESR, ESR_BOFF); - break; - case CAN_IT_SLK: - pendingbitstatus = CheckITStatus(CAN->MSR, MSR_SLAKI); - break; - case CAN_IT_WKU: - pendingbitstatus = CheckITStatus(CAN->MSR, MSR_WKUI); - break; - - default : - pendingbitstatus = RESET; - break; - } - - /* Return the CAN_IT status */ - return pendingbitstatus; -} - -/******************************************************************************* -* Function Name : CAN_ClearITPendingBit -* Description : Clears the CAN’s interrupt pending bits. -* Input : CAN_IT: specifies the interrupt pending bit to clear. -* Output : None. -* Return : None. -*******************************************************************************/ -void CAN_ClearITPendingBit(u32 CAN_IT) -{ - /* Check the parameters */ - assert_param(IS_CAN_ITStatus(CAN_IT)); - - switch (CAN_IT) - { - case CAN_IT_RQCP0: - CAN->TSR = TSR_RQCP0; /* rc_w1*/ - break; - case CAN_IT_RQCP1: - CAN->TSR = TSR_RQCP1; /* rc_w1*/ - break; - case CAN_IT_RQCP2: - CAN->TSR = TSR_RQCP2; /* rc_w1*/ - break; - case CAN_IT_FF0: - CAN->RF0R = RF0R_FULL0; /* rc_w1*/ - break; - case CAN_IT_FOV0: - CAN->RF0R = RF0R_FOVR0; /* rc_w1*/ - break; - case CAN_IT_FF1: - CAN->RF1R = RF1R_FULL1; /* rc_w1*/ - break; - case CAN_IT_FOV1: - CAN->RF1R = RF1R_FOVR1; /* rc_w1*/ - break; - case CAN_IT_EWG: - CAN->ESR &= ~ ESR_EWGF; /* rw */ - break; - case CAN_IT_EPV: - CAN->ESR &= ~ ESR_EPVF; /* rw */ - break; - case CAN_IT_BOF: - CAN->ESR &= ~ ESR_BOFF; /* rw */ - break; - case CAN_IT_WKU: - CAN->MSR = MSR_WKUI; /* rc_w1*/ - break; - case CAN_IT_SLK: - CAN->MSR = MSR_SLAKI; /* rc_w1*/ - break; - default : - break; - } -} - -/******************************************************************************* -* Function Name : CheckITStatus -* Description : Checks whether the CAN interrupt has occurred or not. -* Input : CAN_Reg: specifies the CAN interrupt register to check. -* It_Bit: specifies the interrupt source bit to check. -* Output : None. -* Return : The new state of the CAN Interrupt (SET or RESET). -*******************************************************************************/ -static ITStatus CheckITStatus(u32 CAN_Reg, u32 It_Bit) -{ - ITStatus pendingbitstatus = RESET; - - if ((CAN_Reg & It_Bit) != (u32)RESET) - { - /* CAN_IT is set */ - pendingbitstatus = SET; - } - else - { - /* CAN_IT is reset */ - pendingbitstatus = RESET; - } - - return pendingbitstatus; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_crc.c b/bsp/stm32/library/src/stm32f10x_crc.c deleted file mode 100644 index 29fbdc660..000000000 --- a/bsp/stm32/library/src/stm32f10x_crc.c +++ /dev/null @@ -1,114 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_crc.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the CRC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_crc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ - -/* CR register bit mask */ -#define CR_RESET_Set ((u32)0x00000001) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : CRC_ResetDR -* Description : Resets the CRC Data register (DR). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CRC_ResetDR(void) -{ - /* Reset CRC generator */ - CRC->CR = CR_RESET_Set; -} - -/******************************************************************************* -* Function Name : CRC_CalcCRC -* Description : Computes the 32-bit CRC of a given data word(32-bit). -* Input : - Data: data word(32-bit) to compute its CRC -* Output : None -* Return : 32-bit CRC -*******************************************************************************/ -u32 CRC_CalcCRC(u32 Data) -{ - CRC->DR = Data; - - return (CRC->DR); -} - -/******************************************************************************* -* Function Name : CRC_CalcBlockCRC -* Description : Computes the 32-bit CRC of a given buffer of data word(32-bit). -* Input : - pBuffer: pointer to the buffer containing the data to be -* computed -* - BufferLength: length of the buffer to be computed -* Output : None -* Return : 32-bit CRC -*******************************************************************************/ -u32 CRC_CalcBlockCRC(u32 pBuffer[], u32 BufferLength) -{ - u32 index = 0; - - for(index = 0; index < BufferLength; index++) - { - CRC->DR = pBuffer[index]; - } - - return (CRC->DR); -} - -/******************************************************************************* -* Function Name : CRC_GetCRC -* Description : Returns the current CRC value. -* Input : None -* Output : None -* Return : 32-bit CRC -*******************************************************************************/ -u32 CRC_GetCRC(void) -{ - return (CRC->DR); -} - -/******************************************************************************* -* Function Name : CRC_SetIDRegister -* Description : Stores a 8-bit data in the Independent Data(ID) register. -* Input : - IDValue: 8-bit value to be stored in the ID register -* Output : None -* Return : None -*******************************************************************************/ -void CRC_SetIDRegister(u8 IDValue) -{ - CRC->IDR = IDValue; -} - -/******************************************************************************* -* Function Name : CRC_GetIDRegister -* Description : Returns the 8-bit data stored in the Independent Data(ID) register -* Input : None -* Output : None -* Return : 8-bit value of the ID register -*******************************************************************************/ -u8 CRC_GetIDRegister(void) -{ - return (CRC->IDR); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_dac.c b/bsp/stm32/library/src/stm32f10x_dac.c deleted file mode 100644 index 041daa5a9..000000000 --- a/bsp/stm32/library/src/stm32f10x_dac.c +++ /dev/null @@ -1,389 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dac.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the DAC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dac.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* DAC EN mask */ -#define CR_EN_Set ((u32)0x00000001) - -/* DAC DMAEN mask */ -#define CR_DMAEN_Set ((u32)0x00001000) - -/* CR register Mask */ -#define CR_CLEAR_Mask ((u32)0x00000FFE) - -/* DAC SWTRIG mask */ -#define SWTRIGR_SWTRIG_Set ((u32)0x00000001) - -/* DAC Dual Channels SWTRIG masks */ -#define DUAL_SWTRIG_Set ((u32)0x00000003) -#define DUAL_SWTRIG_Reset ((u32)0xFFFFFFFC) - -/* DHR registers offsets */ -#define DHR12R1_Offset ((u32)0x00000008) -#define DHR12R2_Offset ((u32)0x00000014) -#define DHR12RD_Offset ((u32)0x00000020) - -/* DOR register offset */ -#define DOR_Offset ((u32)0x0000002C) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : DAC_DeInit -* Description : Deinitializes the DAC peripheral registers to their default -* reset values. -* Input : None. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_DeInit(void) -{ - /* Enable DAC reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); - /* Release DAC from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); -} - -/******************************************************************************* -* Function Name : DAC_Init -* Description : Initializes the DAC peripheral according to the specified -* parameters in the DAC_InitStruct. -* Input : - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - DAC_InitStruct: pointer to a DAC_InitTypeDef structure that -* contains the configuration information for the specified -* DAC channel. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_Init(u32 DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) -{ - u32 tmpreg1 = 0, tmpreg2 = 0; - - /* Check the DAC parameters */ - assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); - assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); - assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); - assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); - -/*---------------------------- DAC CR Configuration --------------------------*/ - /* Get the DAC CR value */ - tmpreg1 = DAC->CR; - /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ - tmpreg1 &= ~(CR_CLEAR_Mask << DAC_Channel); - /* Configure for the selected DAC channel: buffer output, trigger, wave genration, - mask/amplitude for wave genration */ - /* Set TSELx and TENx bits according to DAC_Trigger value */ - /* Set WAVEx bits according to DAC_WaveGeneration value */ - /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ - /* Set BOFFx bit according to DAC_OutputBuffer value */ - tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer); - /* Calculate CR register value depending on DAC_Channel */ - tmpreg1 |= tmpreg2 << DAC_Channel; - /* Write to DAC CR */ - DAC->CR = tmpreg1; -} - -/******************************************************************************* -* Function Name : DAC_StructInit -* Description : Fills each DAC_InitStruct member with its default value. -* Input : - DAC_InitStruct : pointer to a DAC_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) -{ -/*--------------- Reset DAC init structure parameters values -----------------*/ - /* Initialize the DAC_Trigger member */ - DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; - - /* Initialize the DAC_WaveGeneration member */ - DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; - - /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; - - /* Initialize the DAC_OutputBuffer member */ - DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; -} - -/******************************************************************************* -* Function Name : DAC_Cmd -* Description : Enables or disables the specified DAC channel. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - NewState: new state of the DAC channel. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_Cmd(u32 DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC channel */ - DAC->CR |= CR_EN_Set << DAC_Channel; - } - else - { - /* Disable the selected DAC channel */ - DAC->CR &= ~(CR_EN_Set << DAC_Channel); - } -} - -/******************************************************************************* -* Function Name : DAC_DMACmd -* Description : Enables or disables the specified DAC channel DMA request. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - NewState: new state of the selected DAC channel DMA request. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_DMACmd(u32 DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DAC channel DMA request */ - DAC->CR |= CR_DMAEN_Set << DAC_Channel; - } - else - { - /* Disable the selected DAC channel DMA request */ - DAC->CR &= ~(CR_DMAEN_Set << DAC_Channel); - } -} - -/******************************************************************************* -* Function Name : DAC_SoftwareTriggerCmd -* Description : Enables or disables the selected DAC channel software trigger. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - NewState: new state of the selected DAC channel software trigger. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SoftwareTriggerCmd(u32 DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable software trigger for the selected DAC channel */ - DAC->SWTRIGR |= SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4); - } - else - { - /* Disable software trigger for the selected DAC channel */ - DAC->SWTRIGR &= ~(SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4)); - } -} - -/******************************************************************************* -* Function Name : DAC_DualSoftwareTriggerCmd -* Description : Enables or disables simultaneously the two DAC channels software -* triggers. -* Input - NewState: new state of the DAC channels software triggers. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable software trigger for both DAC channels */ - DAC->SWTRIGR |= DUAL_SWTRIG_Set ; - } - else - { - /* Disable software trigger for both DAC channels */ - DAC->SWTRIGR &= DUAL_SWTRIG_Reset; - } -} - -/******************************************************************************* -* Function Name : DAC_WaveGenerationCmd -* Description : Enables or disables the selected DAC channel wave generation. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* - DAC_Wave: Specifies the wave type to enable or disable. -* This parameter can be one of the following values: -* - DAC_Wave_Noise: noise wave generation -* - DAC_Wave_Triangle: triangle wave generation -* - NewState: new state of the selected DAC channel wave generation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_WaveGenerationCmd(u32 DAC_Channel, u32 DAC_Wave, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_WAVE(DAC_Wave)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected wave generation for the selected DAC channel */ - DAC->CR |= DAC_Wave << DAC_Channel; - } - else - { - /* Disable the selected wave generation for the selected DAC channel */ - DAC->CR &= ~(DAC_Wave << DAC_Channel); - } -} - -/******************************************************************************* -* Function Name : DAC_SetChannel1Data -* Description : Set the specified data holding register value for DAC channel1. -* Input : - DAC_Align: Specifies the data alignement for DAC channel1. -* This parameter can be one of the following values: -* - DAC_Align_8b_R: 8bit right data alignement selected -* - DAC_Align_12b_L: 12bit left data alignement selected -* - DAC_Align_12b_R: 12bit right data alignement selected -* - Data : Data to be loaded in the selected data holding -* register. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SetChannel1Data(u32 DAC_Align, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - /* Set the DAC channel1 selected data holding register */ - *((vu32 *)(DAC_BASE + DHR12R1_Offset + DAC_Align)) = (u32)Data; -} - -/******************************************************************************* -* Function Name : DAC_SetChannel2Data -* Description : Set the specified data holding register value for DAC channel2. -* Input : - DAC_Align: Specifies the data alignement for DAC channel2. -* This parameter can be one of the following values: -* - DAC_Align_8b_R: 8bit right data alignement selected -* - DAC_Align_12b_L: 12bit left data alignement selected -* - DAC_Align_12b_R: 12bit right data alignement selected -* - Data : Data to be loaded in the selected data holding -* register. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SetChannel2Data(u32 DAC_Align, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - /* Set the DAC channel2 selected data holding register */ - *((vu32 *)(DAC_BASE + DHR12R2_Offset + DAC_Align)) = (u32)Data; -} - -/******************************************************************************* -* Function Name : DAC_SetDualChannelData -* Description : Set the specified data holding register value for dual channel -* DAC. -* Input : - DAC_Align: Specifies the data alignement for dual channel DAC. -* This parameter can be one of the following values: -* - DAC_Align_8b_R: 8bit right data alignement selected -* - DAC_Align_12b_L: 12bit left data alignement selected -* - DAC_Align_12b_R: 12bit right data alignement selected -* - Data2: Data for DAC Channel2 to be loaded in the selected data -* holding register. -* - Data1: Data for DAC Channel1 to be loaded in the selected data -* holding register. -* Output : None -* Return : None -*******************************************************************************/ -void DAC_SetDualChannelData(u32 DAC_Align, u16 Data2, u16 Data1) -{ - u32 data = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data1)); - assert_param(IS_DAC_DATA(Data2)); - - /* Calculate and set dual DAC data holding register value */ - if (DAC_Align == DAC_Align_8b_R) - { - data = ((u32)Data2 << 8) | Data1; - } - else - { - data = ((u32)Data2 << 16) | Data1; - } - - /* Set the dual DAC selected data holding register */ - *((vu32 *)(DAC_BASE + DHR12RD_Offset + DAC_Align)) = data; -} - -/******************************************************************************* -* Function Name : DAC_GetDataOutputValue -* Description : Returns the last data output value of the selected DAC cahnnel. -* Input - DAC_Channel: the selected DAC channel. -* This parameter can be one of the following values: -* - DAC_Channel_1: DAC Channel1 selected -* - DAC_Channel_2: DAC Channel2 selected -* Output : None -* Return : The selected DAC channel data output value. -*******************************************************************************/ -u16 DAC_GetDataOutputValue(u32 DAC_Channel) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - - /* Returns the DAC channel data output register value */ - return (u16) (*(vu32*)(DAC_BASE + DOR_Offset + ((u32)DAC_Channel >> 2))); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_dbgmcu.c b/bsp/stm32/library/src/stm32f10x_dbgmcu.c deleted file mode 100644 index 3fc460ed4..000000000 --- a/bsp/stm32/library/src/stm32f10x_dbgmcu.c +++ /dev/null @@ -1,97 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dbgmcu.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the DBGMCU firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dbgmcu.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define IDCODE_DEVID_Mask ((u32)0x00000FFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : DBGMCU_GetREVID -* Description : Returns the device revision identifier. -* Input : None -* Output : None -* Return : Device revision identifier -*******************************************************************************/ -u32 DBGMCU_GetREVID(void) -{ - return(DBGMCU->IDCODE >> 16); -} - -/******************************************************************************* -* Function Name : DBGMCU_GetDEVID -* Description : Returns the device identifier. -* Input : None -* Output : None -* Return : Device identifier -*******************************************************************************/ -u32 DBGMCU_GetDEVID(void) -{ - return(DBGMCU->IDCODE & IDCODE_DEVID_Mask); -} - -/******************************************************************************* -* Function Name : DBGMCU_Config -* Description : Configures the specified peripheral and low power mode behavior -* when the MCU under Debug mode. -* Input : - DBGMCU_Periph: specifies the peripheral and low power mode. -* This parameter can be any combination of the following values: -* - DBGMCU_SLEEP: Keep debugger connection during SLEEP mode -* - DBGMCU_STOP: Keep debugger connection during STOP mode -* - DBGMCU_STANDBY: Keep debugger connection during STANDBY mode -* - DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted -* - DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted -* - DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted -* - DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted -* - DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted -* - DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted -* - DBGMCU_CAN_STOP: Debug CAN stopped when Core is halted -* - DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped -* when Core is halted -* - DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped -* when Core is halted -* - DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted -* - DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted -* - DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted -* - DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted -* - NewState: new state of the specified peripheral in Debug mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DBGMCU_Config(u32 DBGMCU_Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - DBGMCU->CR |= DBGMCU_Periph; - } - else - { - DBGMCU->CR &= ~DBGMCU_Periph; - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_dma.c b/bsp/stm32/library/src/stm32f10x_dma.c deleted file mode 100644 index ab9305940..000000000 --- a/bsp/stm32/library/src/stm32f10x_dma.c +++ /dev/null @@ -1,678 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_dma.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the DMA firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dma.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* DMA ENABLE mask */ -#define CCR_ENABLE_Set ((u32)0x00000001) -#define CCR_ENABLE_Reset ((u32)0xFFFFFFFE) - -/* DMA1 Channelx interrupt pending bit masks */ -#define DMA1_Channel1_IT_Mask ((u32)0x0000000F) -#define DMA1_Channel2_IT_Mask ((u32)0x000000F0) -#define DMA1_Channel3_IT_Mask ((u32)0x00000F00) -#define DMA1_Channel4_IT_Mask ((u32)0x0000F000) -#define DMA1_Channel5_IT_Mask ((u32)0x000F0000) -#define DMA1_Channel6_IT_Mask ((u32)0x00F00000) -#define DMA1_Channel7_IT_Mask ((u32)0x0F000000) - -/* DMA2 Channelx interrupt pending bit masks */ -#define DMA2_Channel1_IT_Mask ((u32)0x0000000F) -#define DMA2_Channel2_IT_Mask ((u32)0x000000F0) -#define DMA2_Channel3_IT_Mask ((u32)0x00000F00) -#define DMA2_Channel4_IT_Mask ((u32)0x0000F000) -#define DMA2_Channel5_IT_Mask ((u32)0x000F0000) - -/* DMA2 FLAG mask */ -#define FLAG_Mask ((u32)0x10000000) - -/* DMA registers Masks */ -#define CCR_CLEAR_Mask ((u32)0xFFFF800F) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : DMA_DeInit -* Description : Deinitializes the DMAy Channelx registers to their default reset -* values. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= CCR_ENABLE_Reset; - - /* Reset DMAy Channelx control register */ - DMAy_Channelx->CCR = 0; - - /* Reset DMAy Channelx remaining bytes register */ - DMAy_Channelx->CNDTR = 0; - - /* Reset DMAy Channelx peripheral address register */ - DMAy_Channelx->CPAR = 0; - - /* Reset DMAy Channelx memory address register */ - DMAy_Channelx->CMAR = 0; - - switch (*(u32*)&DMAy_Channelx) - { - case DMA1_Channel1_BASE: - /* Reset interrupt pending bits for DMA1 Channel1 */ - DMA1->IFCR |= DMA1_Channel1_IT_Mask; - break; - - case DMA1_Channel2_BASE: - /* Reset interrupt pending bits for DMA1 Channel2 */ - DMA1->IFCR |= DMA1_Channel2_IT_Mask; - break; - - case DMA1_Channel3_BASE: - /* Reset interrupt pending bits for DMA1 Channel3 */ - DMA1->IFCR |= DMA1_Channel3_IT_Mask; - break; - - case DMA1_Channel4_BASE: - /* Reset interrupt pending bits for DMA1 Channel4 */ - DMA1->IFCR |= DMA1_Channel4_IT_Mask; - break; - - case DMA1_Channel5_BASE: - /* Reset interrupt pending bits for DMA1 Channel5 */ - DMA1->IFCR |= DMA1_Channel5_IT_Mask; - break; - - case DMA1_Channel6_BASE: - /* Reset interrupt pending bits for DMA1 Channel6 */ - DMA1->IFCR |= DMA1_Channel6_IT_Mask; - break; - - case DMA1_Channel7_BASE: - /* Reset interrupt pending bits for DMA1 Channel7 */ - DMA1->IFCR |= DMA1_Channel7_IT_Mask; - break; - - case DMA2_Channel1_BASE: - /* Reset interrupt pending bits for DMA2 Channel1 */ - DMA2->IFCR |= DMA2_Channel1_IT_Mask; - break; - - case DMA2_Channel2_BASE: - /* Reset interrupt pending bits for DMA2 Channel2 */ - DMA2->IFCR |= DMA2_Channel2_IT_Mask; - break; - - case DMA2_Channel3_BASE: - /* Reset interrupt pending bits for DMA2 Channel3 */ - DMA2->IFCR |= DMA2_Channel3_IT_Mask; - break; - - case DMA2_Channel4_BASE: - /* Reset interrupt pending bits for DMA2 Channel4 */ - DMA2->IFCR |= DMA2_Channel4_IT_Mask; - break; - - case DMA2_Channel5_BASE: - /* Reset interrupt pending bits for DMA2 Channel5 */ - DMA2->IFCR |= DMA2_Channel5_IT_Mask; - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : DMA_Init -* Description : Initializes the DMAy Channelx according to the specified -* parameters in the DMA_InitStruct. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* - DMA_InitStruct: pointer to a DMA_InitTypeDef structure that -* contains the configuration information for the specified -* DMA Channel. -* Output : None -* Return : None -******************************************************************************/ -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); - assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); - assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); - assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); - assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); - -/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ - /* Get the DMAy_Channelx CCR value */ - tmpreg = DMAy_Channelx->CCR; - /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ - tmpreg &= CCR_CLEAR_Mask; - /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ - /* Set DIR bit according to DMA_DIR value */ - /* Set CIRC bit according to DMA_Mode value */ - /* Set PINC bit according to DMA_PeripheralInc value */ - /* Set MINC bit according to DMA_MemoryInc value */ - /* Set PSIZE bits according to DMA_PeripheralDataSize value */ - /* Set MSIZE bits according to DMA_MemoryDataSize value */ - /* Set PL bits according to DMA_Priority value */ - /* Set the MEM2MEM bit according to DMA_M2M value */ - tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | - DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | - DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | - DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; - /* Write to DMAy Channelx CCR */ - DMAy_Channelx->CCR = tmpreg; - -/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ - /* Write to DMAy Channelx CNDTR */ - DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; - -/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ - /* Write to DMAy Channelx CPAR */ - DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; - -/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ - /* Write to DMAy Channelx CMAR */ - DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; -} - -/******************************************************************************* -* Function Name : DMA_StructInit -* Description : Fills each DMA_InitStruct member with its default value. -* Input : - DMA_InitStruct : pointer to a DMA_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) -{ -/*-------------- Reset DMA init structure parameters values ------------------*/ - /* Initialize the DMA_PeripheralBaseAddr member */ - DMA_InitStruct->DMA_PeripheralBaseAddr = 0; - - /* Initialize the DMA_MemoryBaseAddr member */ - DMA_InitStruct->DMA_MemoryBaseAddr = 0; - - /* Initialize the DMA_DIR member */ - DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; - - /* Initialize the DMA_BufferSize member */ - DMA_InitStruct->DMA_BufferSize = 0; - - /* Initialize the DMA_PeripheralInc member */ - DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; - - /* Initialize the DMA_MemoryInc member */ - DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; - - /* Initialize the DMA_PeripheralDataSize member */ - DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - - /* Initialize the DMA_MemoryDataSize member */ - DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - - /* Initialize the DMA_Mode member */ - DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; - - /* Initialize the DMA_Priority member */ - DMA_InitStruct->DMA_Priority = DMA_Priority_Low; - - /* Initialize the DMA_M2M member */ - DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; -} - -/******************************************************************************* -* Function Name : DMA_Cmd -* Description : Enables or disables the specified DMAy Channelx. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* - NewState: new state of the DMAy Channelx. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMAy Channelx */ - DMAy_Channelx->CCR |= CCR_ENABLE_Set; - } - else - { - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= CCR_ENABLE_Reset; - } -} - -/******************************************************************************* -* Function Name : DMA_ITConfig -* Description : Enables or disables the specified DMAy Channelx interrupts. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* - DMA_IT: specifies the DMA interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - DMA_IT_TC: Transfer complete interrupt mask -* - DMA_IT_HT: Half transfer interrupt mask -* - DMA_IT_TE: Transfer error interrupt mask -* - NewState: new state of the specified DMA interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, u32 DMA_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_CONFIG_IT(DMA_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMA interrupts */ - DMAy_Channelx->CCR |= DMA_IT; - } - else - { - /* Disable the selected DMA interrupts */ - DMAy_Channelx->CCR &= ~DMA_IT; - } -} - -/******************************************************************************* -* Function Name : DMA_GetCurrDataCounter -* Description : Returns the number of remaining data units in the current -* DMAy Channelx transfer. -* Input : - DMAy_Channelx: where y can be 1 or 2 to select the DMA and -* x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the -* DMA Channel. -* Output : None -* Return : The number of remaining data units in the current DMAy Channelx -* transfer. -*******************************************************************************/ -u16 DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - - /* Return the number of remaining data units for DMAy Channelx */ - return ((u16)(DMAy_Channelx->CNDTR)); -} - -/******************************************************************************* -* Function Name : DMA_GetFlagStatus -* Description : Checks whether the specified DMAy Channelx flag is set or not. -* Input : - DMA_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - DMA1_FLAG_GL1: DMA1 Channel1 global flag. -* - DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. -* - DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. -* - DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. -* - DMA1_FLAG_GL2: DMA1 Channel2 global flag. -* - DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. -* - DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. -* - DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. -* - DMA1_FLAG_GL3: DMA1 Channel3 global flag. -* - DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. -* - DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. -* - DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. -* - DMA1_FLAG_GL4: DMA1 Channel4 global flag. -* - DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. -* - DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. -* - DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. -* - DMA1_FLAG_GL5: DMA1 Channel5 global flag. -* - DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. -* - DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. -* - DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. -* - DMA1_FLAG_GL6: DMA1 Channel6 global flag. -* - DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. -* - DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. -* - DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. -* - DMA1_FLAG_GL7: DMA1 Channel7 global flag. -* - DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. -* - DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. -* - DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. -* - DMA2_FLAG_GL1: DMA2 Channel1 global flag. -* - DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. -* - DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. -* - DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. -* - DMA2_FLAG_GL2: DMA2 Channel2 global flag. -* - DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. -* - DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. -* - DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. -* - DMA2_FLAG_GL3: DMA2 Channel3 global flag. -* - DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. -* - DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. -* - DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. -* - DMA2_FLAG_GL4: DMA2 Channel4 global flag. -* - DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. -* - DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. -* - DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. -* - DMA2_FLAG_GL5: DMA2 Channel5 global flag. -* - DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. -* - DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. -* - DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. -* Output : None -* Return : The new state of DMA_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus DMA_GetFlagStatus(u32 DMA_FLAG) -{ - FlagStatus bitstatus = RESET; - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_GET_FLAG(DMA_FLAG)); - - /* Calculate the used DMA */ - if ((DMA_FLAG & FLAG_Mask) != (u32)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMA flag */ - if ((tmpreg & DMA_FLAG) != (u32)RESET) - { - /* DMA_FLAG is set */ - bitstatus = SET; - } - else - { - /* DMA_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the DMA_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : DMA_ClearFlag -* Description : Clears the DMAy Channelx's pending flags. -* Input : - DMA_FLAG: specifies the flag to clear. -* This parameter can be any combination (for the same DMA) of -* the following values: -* - DMA1_FLAG_GL1: DMA1 Channel1 global flag. -* - DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. -* - DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. -* - DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. -* - DMA1_FLAG_GL2: DMA1 Channel2 global flag. -* - DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. -* - DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. -* - DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. -* - DMA1_FLAG_GL3: DMA1 Channel3 global flag. -* - DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. -* - DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. -* - DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. -* - DMA1_FLAG_GL4: DMA1 Channel4 global flag. -* - DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. -* - DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. -* - DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. -* - DMA1_FLAG_GL5: DMA1 Channel5 global flag. -* - DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. -* - DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. -* - DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. -* - DMA1_FLAG_GL6: DMA1 Channel6 global flag. -* - DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. -* - DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. -* - DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. -* - DMA1_FLAG_GL7: DMA1 Channel7 global flag. -* - DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. -* - DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. -* - DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. -* - DMA2_FLAG_GL1: DMA2 Channel1 global flag. -* - DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. -* - DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. -* - DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. -* - DMA2_FLAG_GL2: DMA2 Channel2 global flag. -* - DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. -* - DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. -* - DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. -* - DMA2_FLAG_GL3: DMA2 Channel3 global flag. -* - DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. -* - DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. -* - DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. -* - DMA2_FLAG_GL4: DMA2 Channel4 global flag. -* - DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. -* - DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. -* - DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. -* - DMA2_FLAG_GL5: DMA2 Channel5 global flag. -* - DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. -* - DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. -* - DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_ClearFlag(u32 DMA_FLAG) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG)); - - /* Calculate the used DMA */ - if ((DMA_FLAG & FLAG_Mask) != (u32)RESET) - { - /* Clear the selected DMA flags */ - DMA2->IFCR = DMA_FLAG; - } - else - { - /* Clear the selected DMA flags */ - DMA1->IFCR = DMA_FLAG; - } -} - -/******************************************************************************* -* Function Name : DMA_GetITStatus -* Description : Checks whether the specified DMAy Channelx interrupt has -* occurred or not. -* Input : - DMA_IT: specifies the DMA interrupt source to check. -* This parameter can be one of the following values: -* - DMA1_IT_GL1: DMA1 Channel1 global interrupt. -* - DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. -* - DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. -* - DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. -* - DMA1_IT_GL2: DMA1 Channel2 global interrupt. -* - DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. -* - DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. -* - DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. -* - DMA1_IT_GL3: DMA1 Channel3 global interrupt. -* - DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. -* - DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. -* - DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. -* - DMA1_IT_GL4: DMA1 Channel4 global interrupt. -* - DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. -* - DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. -* - DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. -* - DMA1_IT_GL5: DMA1 Channel5 global interrupt. -* - DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. -* - DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. -* - DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. -* - DMA1_IT_GL6: DMA1 Channel6 global interrupt. -* - DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. -* - DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. -* - DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. -* - DMA1_IT_GL7: DMA1 Channel7 global interrupt. -* - DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. -* - DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. -* - DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. -* - DMA2_IT_GL1: DMA2 Channel1 global interrupt. -* - DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. -* - DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. -* - DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. -* - DMA2_IT_GL2: DMA2 Channel2 global interrupt. -* - DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. -* - DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. -* - DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. -* - DMA2_IT_GL3: DMA2 Channel3 global interrupt. -* - DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. -* - DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. -* - DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. -* - DMA2_IT_GL4: DMA2 Channel4 global interrupt. -* - DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. -* - DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. -* - DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. -* - DMA2_IT_GL5: DMA2 Channel5 global interrupt. -* - DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. -* - DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. -* - DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. -* Output : None -* Return : The new state of DMA_IT (SET or RESET). -*******************************************************************************/ -ITStatus DMA_GetITStatus(u32 DMA_IT) -{ - ITStatus bitstatus = RESET; - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_GET_IT(DMA_IT)); - - /* Calculate the used DMA */ - if ((DMA_IT & FLAG_Mask) != (u32)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMA interrupt */ - if ((tmpreg & DMA_IT) != (u32)RESET) - { - /* DMA_IT is set */ - bitstatus = SET; - } - else - { - /* DMA_IT is reset */ - bitstatus = RESET; - } - /* Return the DMA_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : DMA_ClearITPendingBit -* Description : Clears the DMAy Channelx’s interrupt pending bits. -* Input : - DMA_IT: specifies the DMA interrupt pending bit to clear. -* This parameter can be any combination (for the same DMA) of -* the following values: -* - DMA1_IT_GL1: DMA1 Channel1 global interrupt. -* - DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. -* - DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. -* - DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. -* - DMA1_IT_GL2: DMA1 Channel2 global interrupt. -* - DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. -* - DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. -* - DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. -* - DMA1_IT_GL3: DMA1 Channel3 global interrupt. -* - DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. -* - DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. -* - DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. -* - DMA1_IT_GL4: DMA1 Channel4 global interrupt. -* - DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. -* - DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. -* - DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. -* - DMA1_IT_GL5: DMA1 Channel5 global interrupt. -* - DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. -* - DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. -* - DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. -* - DMA1_IT_GL6: DMA1 Channel6 global interrupt. -* - DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. -* - DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. -* - DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. -* - DMA1_IT_GL7: DMA1 Channel7 global interrupt. -* - DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. -* - DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. -* - DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. -* - DMA2_IT_GL1: DMA2 Channel1 global interrupt. -* - DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. -* - DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. -* - DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. -* - DMA2_IT_GL2: DMA2 Channel2 global interrupt. -* - DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. -* - DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. -* - DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. -* - DMA2_IT_GL3: DMA2 Channel3 global interrupt. -* - DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. -* - DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. -* - DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. -* - DMA2_IT_GL4: DMA2 Channel4 global interrupt. -* - DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. -* - DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. -* - DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. -* - DMA2_IT_GL5: DMA2 Channel5 global interrupt. -* - DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. -* - DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. -* - DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. -* Output : None -* Return : None -*******************************************************************************/ -void DMA_ClearITPendingBit(u32 DMA_IT) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_IT(DMA_IT)); - - /* Calculate the used DMA */ - if ((DMA_IT & FLAG_Mask) != (u32)RESET) - { - /* Clear the selected DMA interrupt pending bits */ - DMA2->IFCR = DMA_IT; - } - else - { - /* Clear the selected DMA interrupt pending bits */ - DMA1->IFCR = DMA_IT; - } -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ - diff --git a/bsp/stm32/library/src/stm32f10x_exti.c b/bsp/stm32/library/src/stm32f10x_exti.c deleted file mode 100644 index b7820aff5..000000000 --- a/bsp/stm32/library/src/stm32f10x_exti.c +++ /dev/null @@ -1,219 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_exti.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the EXTI firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_exti.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define EXTI_LineNone ((u32)0x00000) /* No interrupt selected */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : EXTI_DeInit -* Description : Deinitializes the EXTI peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_DeInit(void) -{ - EXTI->IMR = 0x00000000; - EXTI->EMR = 0x00000000; - EXTI->RTSR = 0x00000000; - EXTI->FTSR = 0x00000000; - EXTI->PR = 0x0007FFFF; -} - -/******************************************************************************* -* Function Name : EXTI_Init -* Description : Initializes the EXTI peripheral according to the specified -* parameters in the EXTI_InitStruct. -* Input : - EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure -* that contains the configuration information for the EXTI -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) -{ - /* Check the parameters */ - assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); - assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); - assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); - assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); - - if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; - - *(vu32 *)(EXTI_BASE + (u32)EXTI_InitStruct->EXTI_Mode)|= EXTI_InitStruct->EXTI_Line; - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; - - /* Select the trigger for the selected external interrupts */ - if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) - { - /* Rising Falling edge */ - EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; - EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; - } - else - { - *(vu32 *)(EXTI_BASE + (u32)EXTI_InitStruct->EXTI_Trigger)|= EXTI_InitStruct->EXTI_Line; - } - } - else - { - /* Disable the selected external lines */ - *(vu32 *)(EXTI_BASE + (u32)EXTI_InitStruct->EXTI_Mode)&= ~EXTI_InitStruct->EXTI_Line; - } -} - -/******************************************************************************* -* Function Name : EXTI_StructInit -* Description : Fills each EXTI_InitStruct member with its reset value. -* Input : - EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) -{ - EXTI_InitStruct->EXTI_Line = EXTI_LineNone; - EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStruct->EXTI_LineCmd = DISABLE; -} - -/******************************************************************************* -* Function Name : EXTI_GenerateSWInterrupt -* Description : Generates a Software interrupt. -* Input : - EXTI_Line: specifies the EXTI lines to be enabled or -* disabled. -* This parameter can be any combination of EXTI_Linex where -* x can be (0..18). -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_GenerateSWInterrupt(u32 EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->SWIER |= EXTI_Line; -} - -/******************************************************************************* -* Function Name : EXTI_GetFlagStatus -* Description : Checks whether the specified EXTI line flag is set or not. -* Input : - EXTI_Line: specifies the EXTI line flag to check. -* This parameter can be: -* - EXTI_Linex: External interrupt line x where x(0..18) -* Output : None -* Return : The new state of EXTI_Line (SET or RESET). -*******************************************************************************/ -FlagStatus EXTI_GetFlagStatus(u32 EXTI_Line) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - if ((EXTI->PR & EXTI_Line) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : EXTI_ClearFlag -* Description : Clears the EXTI’s line pending flags. -* Input : - EXTI_Line: specifies the EXTI lines flags to clear. -* This parameter can be any combination of EXTI_Linex where -* x can be (0..18). -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_ClearFlag(u32 EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/******************************************************************************* -* Function Name : EXTI_GetITStatus -* Description : Checks whether the specified EXTI line is asserted or not. -* Input : - EXTI_Line: specifies the EXTI line to check. -* This parameter can be: -* - EXTI_Linex: External interrupt line x where x(0..18) -* Output : None -* Return : The new state of EXTI_Line (SET or RESET). -*******************************************************************************/ -ITStatus EXTI_GetITStatus(u32 EXTI_Line) -{ - ITStatus bitstatus = RESET; - u32 enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - enablestatus = EXTI->IMR & EXTI_Line; - - if (((EXTI->PR & EXTI_Line) != (u32)RESET) && (enablestatus != (u32)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : EXTI_ClearITPendingBit -* Description : Clears the EXTI’s line pending bits. -* Input : - EXTI_Line: specifies the EXTI lines to clear. -* This parameter can be any combination of EXTI_Linex where -* x can be (0..18). -* Output : None -* Return : None -*******************************************************************************/ -void EXTI_ClearITPendingBit(u32 EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_flash.c b/bsp/stm32/library/src/stm32f10x_flash.c deleted file mode 100644 index 746163387..000000000 --- a/bsp/stm32/library/src/stm32f10x_flash.c +++ /dev/null @@ -1,919 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_flash.c -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file provides all the FLASH firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_flash.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Flash Access Control Register bits */ -#define ACR_LATENCY_Mask ((u32)0x00000038) -#define ACR_HLFCYA_Mask ((u32)0xFFFFFFF7) -#define ACR_PRFTBE_Mask ((u32)0xFFFFFFEF) - -#ifdef _FLASH_PROG -/* Flash Access Control Register bits */ -#define ACR_PRFTBS_Mask ((u32)0x00000020) - -/* Flash Control Register bits */ -#define CR_PG_Set ((u32)0x00000001) -#define CR_PG_Reset ((u32)0x00001FFE) - -#define CR_PER_Set ((u32)0x00000002) -#define CR_PER_Reset ((u32)0x00001FFD) - -#define CR_MER_Set ((u32)0x00000004) -#define CR_MER_Reset ((u32)0x00001FFB) - -#define CR_OPTPG_Set ((u32)0x00000010) -#define CR_OPTPG_Reset ((u32)0x00001FEF) - -#define CR_OPTER_Set ((u32)0x00000020) -#define CR_OPTER_Reset ((u32)0x00001FDF) - -#define CR_STRT_Set ((u32)0x00000040) - -#define CR_LOCK_Set ((u32)0x00000080) - -/* FLASH Mask */ -#define RDPRT_Mask ((u32)0x00000002) -#define WRP0_Mask ((u32)0x000000FF) -#define WRP1_Mask ((u32)0x0000FF00) -#define WRP2_Mask ((u32)0x00FF0000) -#define WRP3_Mask ((u32)0xFF000000) - -/* FLASH Keys */ -#define RDP_Key ((u16)0x00A5) -#define FLASH_KEY1 ((u32)0x45670123) -#define FLASH_KEY2 ((u32)0xCDEF89AB) - -/* Delay definition */ -#define EraseTimeout ((u32)0x00000FFF) -#define ProgramTimeout ((u32)0x0000000F) -#endif - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -#ifdef _FLASH_PROG -static void delay(void); -#endif - -/* Private functions ---------------------------------------------------------*/ -/******************************************************************************* -* Function Name : FLASH_SetLatency -* Description : Sets the code latency value. -* Input : - FLASH_Latency: specifies the FLASH Latency value. -* This parameter can be one of the following values: -* - FLASH_Latency_0: FLASH Zero Latency cycle -* - FLASH_Latency_1: FLASH One Latency cycle -* - FLASH_Latency_2: FLASH Two Latency cycles -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_SetLatency(u32 FLASH_Latency) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_LATENCY(FLASH_Latency)); - - /* Read the ACR register */ - tmpreg = FLASH->ACR; - - /* Sets the Latency value */ - tmpreg &= ACR_LATENCY_Mask; - tmpreg |= FLASH_Latency; - - /* Write the ACR register */ - FLASH->ACR = tmpreg; -} - -/******************************************************************************* -* Function Name : FLASH_HalfCycleAccessCmd -* Description : Enables or disables the Half cycle flash access. -* Input : - FLASH_HalfCycle: specifies the FLASH Half cycle Access mode. -* This parameter can be one of the following values: -* - FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable -* - FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_HalfCycleAccessCmd(u32 FLASH_HalfCycleAccess) -{ - /* Check the parameters */ - assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); - - /* Enable or disable the Half cycle access */ - FLASH->ACR &= ACR_HLFCYA_Mask; - FLASH->ACR |= FLASH_HalfCycleAccess; -} - -/******************************************************************************* -* Function Name : FLASH_PrefetchBufferCmd -* Description : Enables or disables the Prefetch Buffer. -* Input : - FLASH_PrefetchBuffer: specifies the Prefetch buffer status. -* This parameter can be one of the following values: -* - FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable -* - FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_PrefetchBufferCmd(u32 FLASH_PrefetchBuffer) -{ - /* Check the parameters */ - assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); - - /* Enable or disable the Prefetch Buffer */ - FLASH->ACR &= ACR_PRFTBE_Mask; - FLASH->ACR |= FLASH_PrefetchBuffer; -} - -#ifdef _FLASH_PROG -/******************************************************************************* -* Function Name : FLASH_Unlock -* Description : Unlocks the FLASH Program Erase Controller. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_Unlock(void) -{ - /* Authorize the FPEC Access */ - FLASH->KEYR = FLASH_KEY1; - FLASH->KEYR = FLASH_KEY2; -} - -/******************************************************************************* -* Function Name : FLASH_Lock -* Description : Locks the FLASH Program Erase Controller. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_Lock(void) -{ - /* Set the Lock Bit to lock the FPEC and the FCR */ - FLASH->CR |= CR_LOCK_Set; -} - -/******************************************************************************* -* Function Name : FLASH_ErasePage -* Description : Erases a specified FLASH page. -* Input : - Page_Address: The page address to be erased. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ErasePage(u32 Page_Address) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Page_Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the page */ - FLASH->CR|= CR_PER_Set; - FLASH->AR = Page_Address; - FLASH->CR|= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_BUSY) - { - /* if the erase operation is completed, disable the PER Bit */ - FLASH->CR &= CR_PER_Reset; - } - } - /* Return the Erase Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_EraseAllPages -* Description : Erases all FLASH pages. -* Input : None -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_EraseAllPages(void) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR |= CR_MER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_BUSY) - { - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= CR_MER_Reset; - } - } - /* Return the Erase Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_EraseOptionBytes -* Description : Erases the FLASH option bytes. -* Input : None -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_EraseOptionBytes(void) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* if the previous operation is completed, proceed to erase the option bytes */ - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - /* Enable the readout access */ - OB->RDP= RDP_Key; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if (status != FLASH_BUSY) - { - /* Disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - } - /* Return the erase status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ProgramWord -* Description : Programs a word at a specified address. -* Input : - Address: specifies the address to be programmed. -* - Data: specifies the data to be programmed. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ProgramWord(u32 Address, u32 Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR |= CR_PG_Set; - - *(vu16*)Address = (u16)Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - *(vu16*)(Address + 2) = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - else - { - if (status != FLASH_BUSY) - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - } - /* Return the Program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ProgramHalfWord -* Description : Programs a half word at a specified address. -* Input : - Address: specifies the address to be programmed. -* - Data: specifies the data to be programmed. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ProgramHalfWord(u32 Address, u16 Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR |= CR_PG_Set; - - *(vu16*)Address = Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - /* Return the Program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ProgramOptionByteData -* Description : Programs a half word at a specified Option Byte Data address. -* Input : - Address: specifies the address to be programmed. -* This parameter can be 0x1FFFF804 or 0x1FFFF806. -* - Data: specifies the data to be programmed. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ProgramOptionByteData(u32 Address, u8 Data) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_DATA_ADDRESS(Address)); - - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Enables the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - *(vu16*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte Data Program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_EnableWriteProtection -* Description : Write protects the desired pages -* Input : - FLASH_Pages: specifies the address of the pages to be -* write protected. This parameter can be: -* - For STM32F10Xxx Medium-density devices (FLASH page size equal to 1 KB) -* - A value between FLASH_WRProt_Pages0to3 and -* FLASH_WRProt_Pages124to127 -* - For STM32F10Xxx High-density devices (FLASH page size equal to 2 KB) -* - A value between FLASH_WRProt_Pages0to1 and -* FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 -* - FLASH_WRProt_AllPages -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_EnableWriteProtection(u32 FLASH_Pages) -{ - u16 WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; - - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); - - FLASH_Pages = (u32)(~FLASH_Pages); - WRP0_Data = (vu16)(FLASH_Pages & WRP0_Mask); - WRP1_Data = (vu16)((FLASH_Pages & WRP1_Mask) >> 8); - WRP2_Data = (vu16)((FLASH_Pages & WRP2_Mask) >> 16); - WRP3_Data = (vu16)((FLASH_Pages & WRP3_Mask) >> 24); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - FLASH->CR |= CR_OPTPG_Set; - - if(WRP0_Data != 0xFF) - { - OB->WRP0 = WRP0_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) - { - OB->WRP1 = WRP1_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) - { - OB->WRP2 = WRP2_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) - { - OB->WRP3 = WRP3_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the write protection operation Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_ReadOutProtection -* Description : Enables or disables the read out protection. -* If the user has already programmed the other option bytes before -* calling this function, he must re-program them since this -* function erases all option bytes. -* Input : - Newstate: new state of the ReadOut Protection. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - if(NewState != DISABLE) - { - OB->RDP = 0x00; - } - else - { - OB->RDP = RDP_Key; - } - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if(status != FLASH_BUSY) - { - /* Disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - } - } - } - /* Return the protection operation Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_UserOptionByteConfig -* Description : Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / -* RST_STDBY. -* Input : - OB_IWDG: Selects the IWDG mode -* This parameter can be one of the following values: -* - OB_IWDG_SW: Software IWDG selected -* - OB_IWDG_HW: Hardware IWDG selected -* - OB_STOP: Reset event when entering STOP mode. -* This parameter can be one of the following values: -* - OB_STOP_NoRST: No reset generated when entering in STOP -* - OB_STOP_RST: Reset generated when entering in STOP -* - OB_STDBY: Reset event when entering Standby mode. -* This parameter can be one of the following values: -* - OB_STDBY_NoRST: No reset generated when entering in STANDBY -* - OB_STDBY_RST: Reset generated when entering in STANDBY -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_UserOptionByteConfig(u16 OB_IWDG, u16 OB_STOP, u16 OB_STDBY) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); - assert_param(IS_OB_STOP_SOURCE(OB_STOP)); - assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); - - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - OB->USER = ( OB_IWDG | OB_STOP |OB_STDBY) | (u16)0xF8; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_BUSY) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte program Status */ - return status; -} - -/******************************************************************************* -* Function Name : FLASH_GetUserOptionByte -* Description : Returns the FLASH User Option Bytes values. -* Input : None -* Output : None -* Return : The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) -* and RST_STDBY(Bit2). -*******************************************************************************/ -u32 FLASH_GetUserOptionByte(void) -{ - /* Return the User Option Byte */ - return (u32)(FLASH->OBR >> 2); -} - -/******************************************************************************* -* Function Name : FLASH_GetWriteProtectionOptionByte -* Description : Returns the FLASH Write Protection Option Bytes Register value. -* Input : None -* Output : None -* Return : The FLASH Write Protection Option Bytes Register value -*******************************************************************************/ -u32 FLASH_GetWriteProtectionOptionByte(void) -{ - /* Return the Falsh write protection Register value */ - return (u32)(FLASH->WRPR); -} - -/******************************************************************************* -* Function Name : FLASH_GetReadOutProtectionStatus -* Description : Checks whether the FLASH Read Out Protection Status is set -* or not. -* Input : None -* Output : None -* Return : FLASH ReadOut Protection Status(SET or RESET) -*******************************************************************************/ -FlagStatus FLASH_GetReadOutProtectionStatus(void) -{ - FlagStatus readoutstatus = RESET; - - if ((FLASH->OBR & RDPRT_Mask) != (u32)RESET) - { - readoutstatus = SET; - } - else - { - readoutstatus = RESET; - } - return readoutstatus; -} - -/******************************************************************************* -* Function Name : FLASH_GetPrefetchBufferStatus -* Description : Checks whether the FLASH Prefetch Buffer status is set or not. -* Input : None -* Output : None -* Return : FLASH Prefetch Buffer Status (SET or RESET). -*******************************************************************************/ -FlagStatus FLASH_GetPrefetchBufferStatus(void) -{ - FlagStatus bitstatus = RESET; - - if ((FLASH->ACR & ACR_PRFTBS_Mask) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : FLASH_ITConfig -* Description : Enables or disables the specified FLASH interrupts. -* Input : - FLASH_IT: specifies the FLASH interrupt sources to be -* enabled or disabled. -* This parameter can be any combination of the following values: -* - FLASH_IT_ERROR: FLASH Error Interrupt -* - FLASH_IT_EOP: FLASH end of operation Interrupt -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_ITConfig(u16 FLASH_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FLASH_IT(FLASH_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR |= FLASH_IT; - } - else - { - /* Disable the interrupt sources */ - FLASH->CR &= ~(u32)FLASH_IT; - } -} - -/******************************************************************************* -* Function Name : FLASH_GetFlagStatus -* Description : Checks whether the specified FLASH flag is set or not. -* Input : - FLASH_FLAG: specifies the FLASH flag to check. -* This parameter can be one of the following values: -* - FLASH_FLAG_BSY: FLASH Busy flag -* - FLASH_FLAG_PGERR: FLASH Program error flag -* - FLASH_FLAG_WRPRTERR: FLASH Write protected error flag -* - FLASH_FLAG_EOP: FLASH End of Operation flag -* - FLASH_FLAG_OPTERR: FLASH Option Byte error flag -* Output : None -* Return : The new state of FLASH_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus FLASH_GetFlagStatus(u16 FLASH_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; - - if(FLASH_FLAG == FLASH_FLAG_OPTERR) - { - if((FLASH->OBR & FLASH_FLAG_OPTERR) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - else - { - if((FLASH->SR & FLASH_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - /* Return the new state of FLASH_FLAG (SET or RESET) */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : FLASH_ClearFlag -* Description : Clears the FLASH’s pending flags. -* Input : - FLASH_FLAG: specifies the FLASH flags to clear. -* This parameter can be any combination of the following values: -* - FLASH_FLAG_BSY: FLASH Busy flag -* - FLASH_FLAG_PGERR: FLASH Program error flag -* - FLASH_FLAG_WRPRTERR: FLASH Write protected error flag -* - FLASH_FLAG_EOP: FLASH End of Operation flag -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_ClearFlag(u16 FLASH_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; - - /* Clear the flags */ - FLASH->SR = FLASH_FLAG; -} - -/******************************************************************************* -* Function Name : FLASH_GetStatus -* Description : Returns the FLASH Status. -* Input : None -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP or FLASH_COMPLETE -*******************************************************************************/ -FLASH_Status FLASH_GetStatus(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) - { - flashstatus = FLASH_BUSY; - } - else - { - if(FLASH->SR & FLASH_FLAG_PGERR) - { - flashstatus = FLASH_ERROR_PG; - } - else - { - if(FLASH->SR & FLASH_FLAG_WRPRTERR) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - /* Return the Flash Status */ - return flashstatus; -} - -/******************************************************************************* -* Function Name : FLASH_WaitForLastOperation -* Description : Waits for a Flash operation to complete or a TIMEOUT to occur. -* Input : - Timeout: FLASH progamming Timeout -* Output : None -* Return : FLASH Status: The returned value can be: FLASH_BUSY, -* FLASH_ERROR_PG, FLASH_ERROR_WRP, FLASH_COMPLETE or -* FLASH_TIMEOUT. -*******************************************************************************/ -FLASH_Status FLASH_WaitForLastOperation(u32 Timeout) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check for the Flash Status */ - status = FLASH_GetStatus(); - - /* Wait for a Flash operation to complete or a TIMEOUT to occur */ - while((status == FLASH_BUSY) && (Timeout != 0x00)) - { - delay(); - status = FLASH_GetStatus(); - Timeout--; - } - - if(Timeout == 0x00 ) - { - status = FLASH_TIMEOUT; - } - - /* Return the operation status */ - return status; -} - -/******************************************************************************* -* Function Name : delay -* Description : Inserts a time delay. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -static void delay(void) -{ - vu32 i = 0; - - for(i = 0xFF; i != 0; i--) - { - } -} -#endif - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_fsmc.c b/bsp/stm32/library/src/stm32f10x_fsmc.c deleted file mode 100644 index 0cd37a625..000000000 --- a/bsp/stm32/library/src/stm32f10x_fsmc.c +++ /dev/null @@ -1,851 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_fsmc.c -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file provides all the FSMC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_fsmc.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* --------------------- FSMC registers bit mask ---------------------------- */ -/* FSMC BCRx Mask */ -#define BCR_MBKEN_Set ((u32)0x00000001) -#define BCR_MBKEN_Reset ((u32)0x000FFFFE) -#define BCR_FACCEN_Set ((u32)0x00000040) - -/* FSMC PCRx Mask */ -#define PCR_PBKEN_Set ((u32)0x00000004) -#define PCR_PBKEN_Reset ((u32)0x000FFFFB) -#define PCR_ECCEN_Set ((u32)0x00000040) -#define PCR_ECCEN_Reset ((u32)0x000FFFBF) -#define PCR_MemoryType_NAND ((u32)0x00000008) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : FSMC_NORSRAMDeInit -* Description : Deinitializes the FSMC NOR/SRAM Banks registers to their default -* reset values. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 -* - FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 -* - FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 -* - FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMDeInit(u32 FSMC_Bank) -{ - /* Check the parameter */ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); - - /* FSMC_Bank1_NORSRAM1 */ - if(FSMC_Bank == FSMC_Bank1_NORSRAM1) - { - FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; - } - /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ - else - { - FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; - } - - FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; - FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; -} - -/******************************************************************************* -* Function Name : FSMC_NANDDeInit -* Description : Deinitializes the FSMC NAND Banks registers to their default -* reset values. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDDeInit(u32 FSMC_Bank) -{ - /* Check the parameter */ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - /* Set the FSMC_Bank2 registers to their reset values */ - FSMC_Bank2->PCR2 = 0x00000018; - FSMC_Bank2->SR2 = 0x00000040; - FSMC_Bank2->PMEM2 = 0xFCFCFCFC; - FSMC_Bank2->PATT2 = 0xFCFCFCFC; - } - /* FSMC_Bank3_NAND */ - else - { - /* Set the FSMC_Bank3 registers to their reset values */ - FSMC_Bank3->PCR3 = 0x00000018; - FSMC_Bank3->SR3 = 0x00000040; - FSMC_Bank3->PMEM3 = 0xFCFCFCFC; - FSMC_Bank3->PATT3 = 0xFCFCFCFC; - } -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDDeInit -* Description : Deinitializes the FSMC PCCARD Bank registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDDeInit(void) -{ - /* Set the FSMC_Bank4 registers to their reset values */ - FSMC_Bank4->PCR4 = 0x00000018; - FSMC_Bank4->SR4 = 0x00000000; - FSMC_Bank4->PMEM4 = 0xFCFCFCFC; - FSMC_Bank4->PATT4 = 0xFCFCFCFC; - FSMC_Bank4->PIO4 = 0xFCFCFCFC; -} - -/******************************************************************************* -* Function Name : FSMC_NORSRAMInit -* Description : Initializes the FSMC NOR/SRAM Banks according to the -* specified parameters in the FSMC_NORSRAMInitStruct. -* Input : - FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef -* structure that contains the configuration information for -* the FSMC NOR/SRAM specified Banks. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) -{ - /* Check the parameters */ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); - assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); - assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); - assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); - assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); - assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); - assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); - assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); - assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); - assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); - assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); - assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); - assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); - assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); - - /* Bank1 NOR/SRAM control register configuration */ - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = - (u32)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | - FSMC_NORSRAMInitStruct->FSMC_MemoryType | - FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | - FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | - FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | - FSMC_NORSRAMInitStruct->FSMC_WrapMode | - FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | - FSMC_NORSRAMInitStruct->FSMC_WriteOperation | - FSMC_NORSRAMInitStruct->FSMC_WaitSignal | - FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | - FSMC_NORSRAMInitStruct->FSMC_WriteBurst; - - if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) - { - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (u32)BCR_FACCEN_Set; - } - - /* Bank1 NOR/SRAM timing register configuration */ - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = - (u32)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; - - - - /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ - if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) - { - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); - assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); - - FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = - (u32)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; - } - else - { - FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; - } -} - -/******************************************************************************* -* Function Name : FSMC_NANDInit -* Description : Initializes the FSMC NAND Banks according to the specified -* parameters in the FSMC_NANDInitStruct. -* Input : - FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef -* structure that contains the configuration information for -* the FSMC NAND specified Banks. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) -{ - u32 tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; - - /* Check the parameters */ - assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); - assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); - assert_param( IS_FSMC_DATA_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); - assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); - assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); - assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); - assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); - - /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ - tmppcr = (u32)FSMC_NANDInitStruct->FSMC_Waitfeature | - PCR_MemoryType_NAND | - FSMC_NANDInitStruct->FSMC_MemoryDataWidth | - FSMC_NANDInitStruct->FSMC_ECC | - FSMC_NANDInitStruct->FSMC_ECCPageSize | - (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| - (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); - - /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ - tmppmem = (u32)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ - tmppatt = (u32)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) - { - /* FSMC_Bank2_NAND registers configuration */ - FSMC_Bank2->PCR2 = tmppcr; - FSMC_Bank2->PMEM2 = tmppmem; - FSMC_Bank2->PATT2 = tmppatt; - } - else - { - /* FSMC_Bank3_NAND registers configuration */ - FSMC_Bank3->PCR3 = tmppcr; - FSMC_Bank3->PMEM3 = tmppmem; - FSMC_Bank3->PATT3 = tmppatt; - } -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDInit -* Description : Initializes the FSMC PCCARD Bank according to the specified -* parameters in the FSMC_PCCARDInitStruct. -* Input : - FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef -* structure that contains the configuration information for -* the FSMC PCCARD Bank. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) -{ - /* Check the parameters */ - assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); - assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); - assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); - - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); - - /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ - FSMC_Bank4->PCR4 = (u32)FSMC_PCCARDInitStruct->FSMC_Waitfeature | - FSMC_MemoryDataWidth_16b | - (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | - (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); - - /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ - FSMC_Bank4->PMEM4 = (u32)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ - FSMC_Bank4->PATT4 = (u32)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ - FSMC_Bank4->PIO4 = (u32)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); -} - -/******************************************************************************* -* Function Name : FSMC_NORSRAMStructInit -* Description : Fills each FSMC_NORSRAMInitStruct member with its default value. -* Input : - FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) -{ - /* Reset NOR/SRAM Init structure parameters values */ - FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; - FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; - FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; - FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; - FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; - FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; -} - -/******************************************************************************* -* Function Name : FSMC_NANDStructInit -* Description : Fills each FSMC_NANDInitStruct member with its default value. -* Input : - FSMC_NORSRAMInitStruct: pointer to a FSMC_NANDInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) -{ - /* Reset NAND Init structure parameters values */ - FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; - FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; - FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; - FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; - FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; - FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; - FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDStructInit -* Description : Fills each FSMC_PCCARDInitStruct member with its default value. -* Input : - FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) -{ - /* Reset PCCARD Init structure parameters values */ - FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; - FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; - FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; -} - -/******************************************************************************* -* Function Name : FSMC_NORSRAMCmd -* Description : Enables or disables the specified NOR/SRAM Memory Bank. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 -* - FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 -* - FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 -* - FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 -* : - NewState: new state of the FSMC_Bank. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NORSRAMCmd(u32 FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ - FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set; - } - else - { - /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ - FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset; - } -} - -/******************************************************************************* -* Function Name : FSMC_NANDCmd -* Description : Enables or disables the specified NAND Memory Bank. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* : - NewState: new state of the FSMC_Bank. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDCmd(u32 FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 |= PCR_PBKEN_Set; - } - else - { - FSMC_Bank3->PCR3 |= PCR_PBKEN_Set; - } - } - else - { - /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset; - } - else - { - FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset; - } - } -} - -/******************************************************************************* -* Function Name : FSMC_PCCARDCmd -* Description : Enables or disables the PCCARD Memory Bank. -* Input : - NewState: new state of the PCCARD Memory Bank. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_PCCARDCmd(FunctionalState NewState) -{ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ - FSMC_Bank4->PCR4 |= PCR_PBKEN_Set; - } - else - { - /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ - FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset; - } -} - -/******************************************************************************* -* Function Name : FSMC_NANDECCCmd -* Description : Enables or disables the FSMC NAND ECC feature. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* : - NewState: new state of the FSMC NAND ECC feature. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_NANDECCCmd(u32 FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 |= PCR_ECCEN_Set; - } - else - { - FSMC_Bank3->PCR3 |= PCR_ECCEN_Set; - } - } - else - { - /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset; - } - else - { - FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset; - } - } -} - -/******************************************************************************* -* Function Name : FSMC_GetECC -* Description : Returns the error correction code register value. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* Output : None -* Return : The Error Correction Code (ECC) value. -*******************************************************************************/ -u32 FSMC_GetECC(u32 FSMC_Bank) -{ - u32 eccval = 0x00000000; - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - /* Get the ECCR2 register value */ - eccval = FSMC_Bank2->ECCR2; - } - else - { - /* Get the ECCR3 register value */ - eccval = FSMC_Bank3->ECCR3; - } - /* Return the error correction code value */ - return(eccval); -} - -/******************************************************************************* -* Function Name : FSMC_ITConfig -* Description : Enables or disables the specified FSMC interrupts. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_IT: specifies the FSMC interrupt sources to be -* enabled or disabled. -* This parameter can be any combination of the following values: -* - FSMC_IT_RisingEdge: Rising edge detection interrupt. -* - FSMC_IT_Level: Level edge detection interrupt. -* - FSMC_IT_FallingEdge: Falling edge detection interrupt. -* - NewState: new state of the specified FSMC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_ITConfig(u32 FSMC_Bank, u32 FSMC_IT, FunctionalState NewState) -{ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_IT(FSMC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected FSMC_Bank2 interrupts */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 |= FSMC_IT; - } - /* Enable the selected FSMC_Bank3 interrupts */ - else if (FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 |= FSMC_IT; - } - /* Enable the selected FSMC_Bank4 interrupts */ - else - { - FSMC_Bank4->SR4 |= FSMC_IT; - } - } - else - { - /* Disable the selected FSMC_Bank2 interrupts */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - - FSMC_Bank2->SR2 &= (u32)~FSMC_IT; - } - /* Disable the selected FSMC_Bank3 interrupts */ - else if (FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= (u32)~FSMC_IT; - } - /* Disable the selected FSMC_Bank4 interrupts */ - else - { - FSMC_Bank4->SR4 &= (u32)~FSMC_IT; - } - } -} - -/******************************************************************************* -* Function Name : FSMC_GetFlagStatus -* Description : Checks whether the specified FSMC flag is set or not. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - FSMC_FLAG_RisingEdge: Rising egde detection Flag. -* - FSMC_FLAG_Level: Level detection Flag. -* - FSMC_FLAG_FallingEdge: Falling egde detection Flag. -* - FSMC_FLAG_FEMPT: Fifo empty Flag. -* Output : None -* Return : The new state of FSMC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus FSMC_GetFlagStatus(u32 FSMC_Bank, u32 FSMC_FLAG) -{ - FlagStatus bitstatus = RESET; - u32 tmpsr = 0x00000000; - - /* Check the parameters */ - assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); - assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - tmpsr = FSMC_Bank2->SR2; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - tmpsr = FSMC_Bank3->SR3; - } - /* FSMC_Bank4_PCCARD*/ - else - { - tmpsr = FSMC_Bank4->SR4; - } - - /* Get the flag status */ - if ((tmpsr & FSMC_FLAG) != (u16)RESET ) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : FSMC_ClearFlag -* Description : Clears the FSMC’s pending flags. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - FSMC_FLAG_RisingEdge: Rising egde detection Flag. -* - FSMC_FLAG_Level: Level detection Flag. -* - FSMC_FLAG_FallingEdge: Falling egde detection Flag. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_ClearFlag(u32 FSMC_Bank, u32 FSMC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); - assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 &= ~FSMC_FLAG; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= ~FSMC_FLAG; - } - /* FSMC_Bank4_PCCARD*/ - else - { - FSMC_Bank4->SR4 &= ~FSMC_FLAG; - } -} - -/******************************************************************************* -* Function Name : FSMC_GetITStatus -* Description : Checks whether the specified FSMC interrupt has occurred or not. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_IT: specifies the FSMC interrupt source to check. -* This parameter can be one of the following values: -* - FSMC_IT_RisingEdge: Rising edge detection interrupt. -* - FSMC_IT_Level: Level edge detection interrupt. -* - FSMC_IT_FallingEdge: Falling edge detection interrupt. -* Output : None -* Return : The new state of FSMC_IT (SET or RESET). -*******************************************************************************/ -ITStatus FSMC_GetITStatus(u32 FSMC_Bank, u32 FSMC_IT) -{ - ITStatus bitstatus = RESET; - u32 tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; - - /* Check the parameters */ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_GET_IT(FSMC_IT)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - tmpsr = FSMC_Bank2->SR2; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - tmpsr = FSMC_Bank3->SR3; - } - /* FSMC_Bank4_PCCARD*/ - else - { - tmpsr = FSMC_Bank4->SR4; - } - - itstatus = tmpsr & FSMC_IT; - - itenable = tmpsr & (FSMC_IT >> 3); - - if ((itstatus != (u32)RESET) && (itenable != (u32)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : FSMC_ClearITPendingBit -* Description : Clears the FSMC’s interrupt pending bits. -* Input : - FSMC_Bank: specifies the FSMC Bank to be used -* This parameter can be one of the following values: -* - FSMC_Bank2_NAND: FSMC Bank2 NAND -* - FSMC_Bank3_NAND: FSMC Bank3 NAND -* - FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD -* - FSMC_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - FSMC_IT_RisingEdge: Rising edge detection interrupt. -* - FSMC_IT_Level: Level edge detection interrupt. -* - FSMC_IT_FallingEdge: Falling edge detection interrupt. -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_ClearITPendingBit(u32 FSMC_Bank, u32 FSMC_IT) -{ - /* Check the parameters */ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_IT(FSMC_IT)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); - } - /* FSMC_Bank4_PCCARD*/ - else - { - FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); - } -} - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_gpio.c b/bsp/stm32/library/src/stm32f10x_gpio.c deleted file mode 100644 index 6c065c9f8..000000000 --- a/bsp/stm32/library/src/stm32f10x_gpio.c +++ /dev/null @@ -1,583 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_gpio.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the GPIO firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_gpio.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ RCC registers bit address in the alias region ----------- */ -#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) - -/* --- EVENTCR Register ---*/ -/* Alias word address of EVOE bit */ -#define EVCR_OFFSET (AFIO_OFFSET + 0x00) -#define EVOE_BitNumber ((u8)0x07) -#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) - -#define EVCR_PORTPINCONFIG_MASK ((u16)0xFF80) -#define LSB_MASK ((u16)0xFFFF) -#define DBGAFR_POSITION_MASK ((u32)0x000F0000) -#define DBGAFR_SWJCFG_MASK ((u32)0xF0FFFFFF) -#define DBGAFR_LOCATION_MASK ((u32)0x00200000) -#define DBGAFR_NUMBITS_MASK ((u32)0x00100000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : GPIO_DeInit -* Description : Deinitializes the GPIOx peripheral registers to their default -* reset values. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_DeInit(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - switch (*(u32*)&GPIOx) - { - case GPIOA_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); - break; - - case GPIOB_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); - break; - - case GPIOC_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); - break; - - case GPIOD_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); - break; - - case GPIOE_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); - break; - - case GPIOF_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); - break; - - case GPIOG_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : GPIO_AFIODeInit -* Description : Deinitializes the Alternate Functions (remap, event control -* and EXTI configuration) registers to their default reset -* values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_AFIODeInit(void) -{ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); -} - -/******************************************************************************* -* Function Name : GPIO_Init -* Description : Initializes the GPIOx peripheral according to the specified -* parameters in the GPIO_InitStruct. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that -* contains the configuration information for the specified GPIO -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) -{ - u32 currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; - u32 tmpreg = 0x00, pinmask = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); - assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); - -/*---------------------------- GPIO Mode Configuration -----------------------*/ - currentmode = ((u32)GPIO_InitStruct->GPIO_Mode) & ((u32)0x0F); - - if ((((u32)GPIO_InitStruct->GPIO_Mode) & ((u32)0x10)) != 0x00) - { - /* Check the parameters */ - assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); - /* Output mode */ - currentmode |= (u32)GPIO_InitStruct->GPIO_Speed; - } - -/*---------------------------- GPIO CRL Configuration ------------------------*/ - /* Configure the eight low port pins */ - if (((u32)GPIO_InitStruct->GPIO_Pin & ((u32)0x00FF)) != 0x00) - { - tmpreg = GPIOx->CRL; - - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = ((u32)0x01) << pinpos; - /* Get the port pins position */ - currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; - - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding low control register bits */ - pinmask = ((u32)0x0F) << pos; - tmpreg &= ~pinmask; - - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((u32)0x01) << pinpos); - } - else - { - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((u32)0x01) << pinpos); - } - } - } - } - GPIOx->CRL = tmpreg; - } - -/*---------------------------- GPIO CRH Configuration ------------------------*/ - /* Configure the eight high port pins */ - if (GPIO_InitStruct->GPIO_Pin > 0x00FF) - { - tmpreg = GPIOx->CRH; - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = (((u32)0x01) << (pinpos + 0x08)); - /* Get the port pins position */ - currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding high control register bits */ - pinmask = ((u32)0x0F) << pos; - tmpreg &= ~pinmask; - - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((u32)0x01) << (pinpos + 0x08)); - } - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((u32)0x01) << (pinpos + 0x08)); - } - } - } - GPIOx->CRH = tmpreg; - } -} - -/******************************************************************************* -* Function Name : GPIO_StructInit -* Description : Fills each GPIO_InitStruct member with its default value. -* Input : - GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; - GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; -} - -/******************************************************************************* -* Function Name : GPIO_ReadInputDataBit -* Description : Reads the specified input port pin. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* : - GPIO_Pin: specifies the port bit to read. -* This parameter can be GPIO_Pin_x where x can be (0..15). -* Output : None -* Return : The input port pin value. -*******************************************************************************/ -u8 GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - u8 bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != (u32)Bit_RESET) - { - bitstatus = (u8)Bit_SET; - } - else - { - bitstatus = (u8)Bit_RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : GPIO_ReadInputData -* Description : Reads the specified GPIO input data port. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* Output : None -* Return : GPIO input data port value. -*******************************************************************************/ -u16 GPIO_ReadInputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((u16)GPIOx->IDR); -} - -/******************************************************************************* -* Function Name : GPIO_ReadOutputDataBit -* Description : Reads the specified output data port bit. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* : - GPIO_Pin: specifies the port bit to read. -* This parameter can be GPIO_Pin_x where x can be (0..15). -* Output : None -* Return : The output port pin value. -*******************************************************************************/ -u8 GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - u8 bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->ODR & GPIO_Pin) != (u32)Bit_RESET) - { - bitstatus = (u8)Bit_SET; - } - else - { - bitstatus = (u8)Bit_RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : GPIO_ReadOutputData -* Description : Reads the specified GPIO output data port. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* Output : None -* Return : GPIO output data port value. -*******************************************************************************/ -u16 GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((u16)GPIOx->ODR); -} - -/******************************************************************************* -* Function Name : GPIO_SetBits -* Description : Sets the selected data port bits. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bits to be written. -* This parameter can be any combination of GPIO_Pin_x where -* x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_SetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BSRR = GPIO_Pin; -} - -/******************************************************************************* -* Function Name : GPIO_ResetBits -* Description : Clears the selected data port bits. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bits to be written. -* This parameter can be any combination of GPIO_Pin_x where -* x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BRR = GPIO_Pin; -} - -/******************************************************************************* -* Function Name : GPIO_WriteBit -* Description : Sets or clears the selected data port bit. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bit to be written. -* This parameter can be one of GPIO_Pin_x where x can be (0..15). -* - BitVal: specifies the value to be written to the selected bit. -* This parameter can be one of the BitAction enum values: -* - Bit_RESET: to clear the port pin -* - Bit_SET: to set the port pin -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin, BitAction BitVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_BIT_ACTION(BitVal)); - - if (BitVal != Bit_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BRR = GPIO_Pin; - } -} - -/******************************************************************************* -* Function Name : GPIO_Write -* Description : Writes data to the specified GPIO data port. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - PortVal: specifies the value to be written to the port output -* data register. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_Write(GPIO_TypeDef* GPIOx, u16 PortVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - GPIOx->ODR = PortVal; -} - -/******************************************************************************* -* Function Name : GPIO_PinLockConfig -* Description : Locks GPIO Pins configuration registers. -* Input : - GPIOx: where x can be (A..G) to select the GPIO peripheral. -* - GPIO_Pin: specifies the port bit to be written. -* This parameter can be any combination of GPIO_Pin_x where -* x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, u16 GPIO_Pin) -{ - u32 tmp = 0x00010000; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - tmp |= GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Reset LCKK bit */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; -} - -/******************************************************************************* -* Function Name : GPIO_EventOutputConfig -* Description : Selects the GPIO pin used as Event output. -* Input : - GPIO_PortSource: selects the GPIO port to be used as source -* for Event output. -* This parameter can be GPIO_PortSourceGPIOx where x can be -* (A..E). -* - GPIO_PinSource: specifies the pin for the Event output. -* This parameter can be GPIO_PinSourcex where x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_EventOutputConfig(u8 GPIO_PortSource, u8 GPIO_PinSource) -{ - u32 tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmpreg = AFIO->EVCR; - /* Clear the PORT[6:4] and PIN[3:0] bits */ - tmpreg &= EVCR_PORTPINCONFIG_MASK; - tmpreg |= (u32)GPIO_PortSource << 0x04; - tmpreg |= GPIO_PinSource; - - AFIO->EVCR = tmpreg; -} - -/******************************************************************************* -* Function Name : GPIO_EventOutputCmd -* Description : Enables or disables the Event Output. -* Input : - NewState: new state of the Event output. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_EventOutputCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) EVCR_EVOE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : GPIO_PinRemapConfig -* Description : Changes the mapping of the specified pin. -* Input : - GPIO_Remap: selects the pin to remap. -* This parameter can be one of the following values: -* - GPIO_Remap_SPI1 -* - GPIO_Remap_I2C1 -* - GPIO_Remap_USART1 -* - GPIO_Remap_USART2 -* - GPIO_PartialRemap_USART3 -* - GPIO_FullRemap_USART3 -* - GPIO_PartialRemap_TIM1 -* - GPIO_FullRemap_TIM1 -* - GPIO_PartialRemap1_TIM2 -* - GPIO_PartialRemap2_TIM2 -* - GPIO_FullRemap_TIM2 -* - GPIO_PartialRemap_TIM3 -* - GPIO_FullRemap_TIM3 -* - GPIO_Remap_TIM4 -* - GPIO_Remap1_CAN -* - GPIO_Remap2_CAN -* - GPIO_Remap_PD01 -* - GPIO_Remap_TIM5CH4_LSI -* - GPIO_Remap_ADC1_ETRGINJ -* - GPIO_Remap_ADC1_ETRGREG -* - GPIO_Remap_ADC2_ETRGINJ -* - GPIO_Remap_ADC2_ETRGREG -* - GPIO_Remap_SWJ_NoJTRST -* - GPIO_Remap_SWJ_JTAGDisable -* - GPIO_Remap_SWJ_Disable -* - NewState: new state of the port pin remapping. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_PinRemapConfig(u32 GPIO_Remap, FunctionalState NewState) -{ - u32 tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_REMAP(GPIO_Remap)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - tmpreg = AFIO->MAPR; - - tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; - tmp = GPIO_Remap & LSB_MASK; - - if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) - { - tmpreg &= DBGAFR_SWJCFG_MASK; - AFIO->MAPR &= DBGAFR_SWJCFG_MASK; - } - else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) - { - tmp1 = ((u32)0x03) << tmpmask; - tmpreg &= ~tmp1; - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - else - { - tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - - if (NewState != DISABLE) - { - tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); - } - - AFIO->MAPR = tmpreg; -} - -/******************************************************************************* -* Function Name : GPIO_EXTILineConfig -* Description : Selects the GPIO pin used as EXTI Line. -* Input : - GPIO_PortSource: selects the GPIO port to be used as -* source for EXTI lines. -* This parameter can be GPIO_PortSourceGPIOx where x can be -* (A..G). -* - GPIO_PinSource: specifies the EXTI line to be configured. -* This parameter can be GPIO_PinSourcex where x can be (0..15). -* Output : None -* Return : None -*******************************************************************************/ -void GPIO_EXTILineConfig(u8 GPIO_PortSource, u8 GPIO_PinSource) -{ - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmp = ((u32)0x0F) << (0x04 * (GPIO_PinSource & (u8)0x03)); - - AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; - AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((u32)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (u8)0x03))); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_i2c.c b/bsp/stm32/library/src/stm32f10x_i2c.c deleted file mode 100644 index 8c27db85b..000000000 --- a/bsp/stm32/library/src/stm32f10x_i2c.c +++ /dev/null @@ -1,1216 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_i2c.c -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file provides all the I2C firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_i2c.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* I2C SPE mask */ -#define CR1_PE_Set ((u16)0x0001) -#define CR1_PE_Reset ((u16)0xFFFE) - -/* I2C START mask */ -#define CR1_START_Set ((u16)0x0100) -#define CR1_START_Reset ((u16)0xFEFF) - -/* I2C STOP mask */ -#define CR1_STOP_Set ((u16)0x0200) -#define CR1_STOP_Reset ((u16)0xFDFF) - -/* I2C ACK mask */ -#define CR1_ACK_Set ((u16)0x0400) -#define CR1_ACK_Reset ((u16)0xFBFF) - -/* I2C ENGC mask */ -#define CR1_ENGC_Set ((u16)0x0040) -#define CR1_ENGC_Reset ((u16)0xFFBF) - -/* I2C SWRST mask */ -#define CR1_SWRST_Set ((u16)0x8000) -#define CR1_SWRST_Reset ((u16)0x7FFF) - -/* I2C PEC mask */ -#define CR1_PEC_Set ((u16)0x1000) -#define CR1_PEC_Reset ((u16)0xEFFF) - -/* I2C ENPEC mask */ -#define CR1_ENPEC_Set ((u16)0x0020) -#define CR1_ENPEC_Reset ((u16)0xFFDF) - -/* I2C ENARP mask */ -#define CR1_ENARP_Set ((u16)0x0010) -#define CR1_ENARP_Reset ((u16)0xFFEF) - -/* I2C NOSTRETCH mask */ -#define CR1_NOSTRETCH_Set ((u16)0x0080) -#define CR1_NOSTRETCH_Reset ((u16)0xFF7F) - -/* I2C registers Masks */ -#define CR1_CLEAR_Mask ((u16)0xFBF5) - -/* I2C DMAEN mask */ -#define CR2_DMAEN_Set ((u16)0x0800) -#define CR2_DMAEN_Reset ((u16)0xF7FF) - -/* I2C LAST mask */ -#define CR2_LAST_Set ((u16)0x1000) -#define CR2_LAST_Reset ((u16)0xEFFF) - -/* I2C FREQ mask */ -#define CR2_FREQ_Reset ((u16)0xFFC0) - -/* I2C ADD0 mask */ -#define OAR1_ADD0_Set ((u16)0x0001) -#define OAR1_ADD0_Reset ((u16)0xFFFE) - -/* I2C ENDUAL mask */ -#define OAR2_ENDUAL_Set ((u16)0x0001) -#define OAR2_ENDUAL_Reset ((u16)0xFFFE) - -/* I2C ADD2 mask */ -#define OAR2_ADD2_Reset ((u16)0xFF01) - -/* I2C F/S mask */ -#define CCR_FS_Set ((u16)0x8000) - -/* I2C CCR mask */ -#define CCR_CCR_Set ((u16)0x0FFF) - -/* I2C FLAG mask */ -#define FLAG_Mask ((u32)0x00FFFFFF) - -/* I2C Interrupt Enable mask */ -#define ITEN_Mask ((u32)0x07000000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : I2C_DeInit -* Description : Deinitializes the I2Cx peripheral registers to their default -* reset values. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DeInit(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - switch (*(u32*)&I2Cx) - { - case I2C1_BASE: - /* Enable I2C1 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); - /* Release I2C1 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); - break; - - case I2C2_BASE: - /* Enable I2C2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); - /* Release I2C2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : I2C_Init -* Description : Initializes the I2Cx peripheral according to the specified -* parameters in the I2C_InitStruct. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_InitStruct: pointer to a I2C_InitTypeDef structure that -* contains the configuration information for the specified -* I2C peripheral. -* Output : None -* Return : None -******************************************************************************/ -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) -{ - u16 tmpreg = 0, freqrange = 0; - u16 result = 0x04; - u32 pclk1 = 8000000; - RCC_ClocksTypeDef rcc_clocks; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); - assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); - assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); - assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); - -/*---------------------------- I2Cx CR2 Configuration ------------------------*/ - /* Get the I2Cx CR2 value */ - tmpreg = I2Cx->CR2; - /* Clear frequency FREQ[5:0] bits */ - tmpreg &= CR2_FREQ_Reset; - /* Get pclk1 frequency value */ - RCC_GetClocksFreq(&rcc_clocks); - pclk1 = rcc_clocks.PCLK1_Frequency; - /* Set frequency bits depending on pclk1 value */ - freqrange = (u16)(pclk1 / 1000000); - tmpreg |= freqrange; - /* Write to I2Cx CR2 */ - I2Cx->CR2 = tmpreg; - -/*---------------------------- I2Cx CCR Configuration ------------------------*/ - /* Disable the selected I2C peripheral to configure TRISE */ - I2Cx->CR1 &= CR1_PE_Reset; - - /* Reset tmpreg value */ - /* Clear F/S, DUTY and CCR[11:0] bits */ - tmpreg = 0; - - /* Configure speed in standard mode */ - if (I2C_InitStruct->I2C_ClockSpeed <= 100000) - { - /* Standard mode speed calculate */ - result = (u16)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); - /* Test if CCR value is under 0x4*/ - if (result < 0x04) - { - /* Set minimum allowed value */ - result = 0x04; - } - /* Set speed value for standard mode */ - tmpreg |= result; - /* Set Maximum Rise Time for standard mode */ - I2Cx->TRISE = freqrange + 1; - } - /* Configure speed in fast mode */ - else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ - { - if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) - { - /* Fast mode speed calculate: Tlow/Thigh = 2 */ - result = (u16)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); - } - else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ - { - /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ - result = (u16)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); - /* Set DUTY bit */ - result |= I2C_DutyCycle_16_9; - } - /* Test if CCR value is under 0x1*/ - if ((result & CCR_CCR_Set) == 0) - { - /* Set minimum allowed value */ - result |= (u16)0x0001; - } - /* Set speed value and set F/S bit for fast mode */ - tmpreg |= result | CCR_FS_Set; - /* Set Maximum Rise Time for fast mode */ - I2Cx->TRISE = (u16)(((freqrange * 300) / 1000) + 1); - } - /* Write to I2Cx CCR */ - I2Cx->CCR = tmpreg; - - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - -/*---------------------------- I2Cx CR1 Configuration ------------------------*/ - /* Get the I2Cx CR1 value */ - tmpreg = I2Cx->CR1; - /* Clear ACK, SMBTYPE and SMBUS bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure I2Cx: mode and acknowledgement */ - /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ - /* Set ACK bit according to I2C_Ack value */ - tmpreg |= (u16)((u32)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); - /* Write to I2Cx CR1 */ - I2Cx->CR1 = tmpreg; - -/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ - /* Set I2Cx Own Address1 and acknowledged address */ - I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); -} - -/******************************************************************************* -* Function Name : I2C_StructInit -* Description : Fills each I2C_InitStruct member with its default value. -* Input : - I2C_InitStruct: pointer to an I2C_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) -{ -/*---------------- Reset I2C init structure parameters values ----------------*/ - /* Initialize the I2C_Mode member */ - I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; - - /* Initialize the I2C_DutyCycle member */ - I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; - - /* Initialize the I2C_OwnAddress1 member */ - I2C_InitStruct->I2C_OwnAddress1 = 0; - - /* Initialize the I2C_Ack member */ - I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; - - /* Initialize the I2C_AcknowledgedAddress member */ - I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; - - /* initialize the I2C_ClockSpeed member */ - I2C_InitStruct->I2C_ClockSpeed = 5000; -} - -/******************************************************************************* -* Function Name : I2C_Cmd -* Description : Enables or disables the specified I2C peripheral. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx peripheral. This parameter -* can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - } - else - { - /* Disable the selected I2C peripheral */ - I2Cx->CR1 &= CR1_PE_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_DMACmd -* Description : Enables or disables the specified I2C DMA requests. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C DMA transfer. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C DMA requests */ - I2Cx->CR2 |= CR2_DMAEN_Set; - } - else - { - /* Disable the selected I2C DMA requests */ - I2Cx->CR2 &= CR2_DMAEN_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_DMALastTransferCmd -* Description : Specifies that the next DMA transfer is the last one. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C DMA last transfer. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Next DMA transfer is the last transfer */ - I2Cx->CR2 |= CR2_LAST_Set; - } - else - { - /* Next DMA transfer is not the last transfer */ - I2Cx->CR2 &= CR2_LAST_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GenerateSTART -* Description : Generates I2Cx communication START condition. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C START condition generation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Generate a START condition */ - I2Cx->CR1 |= CR1_START_Set; - } - else - { - /* Disable the START condition generation */ - I2Cx->CR1 &= CR1_START_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GenerateSTOP -* Description : Generates I2Cx communication STOP condition. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C STOP condition generation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Generate a STOP condition */ - I2Cx->CR1 |= CR1_STOP_Set; - } - else - { - /* Disable the STOP condition generation */ - I2Cx->CR1 &= CR1_STOP_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_AcknowledgeConfig -* Description : Enables or disables the specified I2C acknowledge feature. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C Acknowledgement. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the acknowledgement */ - I2Cx->CR1 |= CR1_ACK_Set; - } - else - { - /* Disable the acknowledgement */ - I2Cx->CR1 &= CR1_ACK_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_OwnAddress2Config -* Description : Configures the specified I2C own address2. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - Address: specifies the 7bit I2C own address2. -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, u8 Address) -{ - u16 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Get the old register value */ - tmpreg = I2Cx->OAR2; - /* Reset I2Cx Own address2 bit [7:1] */ - tmpreg &= OAR2_ADD2_Reset; - /* Set I2Cx Own address2 */ - tmpreg |= (u16)(Address & (u16)0x00FE); - /* Store the new register value */ - I2Cx->OAR2 = tmpreg; -} - -/******************************************************************************* -* Function Name : I2C_DualAddressCmd -* Description : Enables or disables the specified I2C dual addressing mode. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C dual addressing mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable dual addressing mode */ - I2Cx->OAR2 |= OAR2_ENDUAL_Set; - } - else - { - /* Disable dual addressing mode */ - I2Cx->OAR2 &= OAR2_ENDUAL_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GeneralCallCmd -* Description : Enables or disables the specified I2C general call feature. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C General call. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable generall call */ - I2Cx->CR1 |= CR1_ENGC_Set; - } - else - { - /* Disable generall call */ - I2Cx->CR1 &= CR1_ENGC_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_ITConfig -* Description : Enables or disables the specified I2C interrupts. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_IT: specifies the I2C interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - I2C_IT_BUF: Buffer interrupt mask -* - I2C_IT_EVT: Event interrupt mask -* - I2C_IT_ERR: Error interrupt mask -* - NewState: new state of the specified I2C interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ITConfig(I2C_TypeDef* I2Cx, u16 I2C_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_I2C_CONFIG_IT(I2C_IT)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C interrupts */ - I2Cx->CR2 |= I2C_IT; - } - else - { - /* Disable the selected I2C interrupts */ - I2Cx->CR2 &= (u16)~I2C_IT; - } -} - -/******************************************************************************* -* Function Name : I2C_SendData -* Description : Sends a data byte through the I2Cx peripheral. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - Data: Byte to be transmitted.. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_SendData(I2C_TypeDef* I2Cx, u8 Data) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Write in the DR register the data to be sent */ - I2Cx->DR = Data; -} - -/******************************************************************************* -* Function Name : I2C_ReceiveData -* Description : Returns the most recent received data by the I2Cx peripheral. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : The value of the received data. -*******************************************************************************/ -u8 I2C_ReceiveData(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Return the data in the DR register */ - return (u8)I2Cx->DR; -} - -/******************************************************************************* -* Function Name : I2C_Send7bitAddress -* Description : Transmits the address byte to select the slave device. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - Address: specifies the slave address which will be transmitted -* - I2C_Direction: specifies whether the I2C device will be a -* Transmitter or a Receiver. -* This parameter can be one of the following values -* - I2C_Direction_Transmitter: Transmitter mode -* - I2C_Direction_Receiver: Receiver mode -* Output : None -* Return : None. -*******************************************************************************/ -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 I2C_Direction) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DIRECTION(I2C_Direction)); - - /* Test on the direction to set/reset the read/write bit */ - if (I2C_Direction != I2C_Direction_Transmitter) - { - /* Set the address bit0 for read */ - Address |= OAR1_ADD0_Set; - } - else - { - /* Reset the address bit0 for write */ - Address &= OAR1_ADD0_Reset; - } - /* Send the address */ - I2Cx->DR = Address; -} - -/******************************************************************************* -* Function Name : I2C_ReadRegister -* Description : Reads the specified I2C register and returns its value. -* Input1 : - I2C_Register: specifies the register to read. -* This parameter can be one of the following values: -* - I2C_Register_CR1: CR1 register. -* - I2C_Register_CR2: CR2 register. -* - I2C_Register_OAR1: OAR1 register. -* - I2C_Register_OAR2: OAR2 register. -* - I2C_Register_DR: DR register. -* - I2C_Register_SR1: SR1 register. -* - I2C_Register_SR2: SR2 register. -* - I2C_Register_CCR: CCR register. -* - I2C_Register_TRISE: TRISE register. -* Output : None -* Return : The value of the read register. -*******************************************************************************/ -u16 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_REGISTER(I2C_Register)); - - /* Return the selected register value */ - return (*(vu16 *)(*((vu32 *)&I2Cx) + I2C_Register)); -} - -/******************************************************************************* -* Function Name : I2C_SoftwareResetCmd -* Description : Enables or disables the specified I2C software reset. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C software reset. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Peripheral under reset */ - I2Cx->CR1 |= CR1_SWRST_Set; - } - else - { - /* Peripheral not under reset */ - I2Cx->CR1 &= CR1_SWRST_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_SMBusAlertConfig -* Description : Drives the SMBusAlert pin high or low for the specified I2C. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_SMBusAlert: specifies SMBAlert pin level. -* This parameter can be one of the following values: -* - I2C_SMBusAlert_Low: SMBAlert pin driven low -* - I2C_SMBusAlert_High: SMBAlert pin driven high -* Output : None -* Return : None -*******************************************************************************/ -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, u16 I2C_SMBusAlert) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); - - if (I2C_SMBusAlert == I2C_SMBusAlert_Low) - { - /* Drive the SMBusAlert pin Low */ - I2Cx->CR1 |= I2C_SMBusAlert_Low; - } - else - { - /* Drive the SMBusAlert pin High */ - I2Cx->CR1 &= I2C_SMBusAlert_High; - } -} - -/******************************************************************************* -* Function Name : I2C_TransmitPEC -* Description : Enables or disables the specified I2C PEC transfer. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2C PEC transmission. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC transmission */ - I2Cx->CR1 |= CR1_PEC_Set; - } - else - { - /* Disable the selected I2C PEC transmission */ - I2Cx->CR1 &= CR1_PEC_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_PECPositionConfig -* Description : Selects the specified I2C PEC position. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_PECPosition: specifies the PEC position. -* This parameter can be one of the following values: -* - I2C_PECPosition_Next: indicates that the next -* byte is PEC -* - I2C_PECPosition_Current: indicates that current -* byte is PEC -* Output : None -* Return : None -*******************************************************************************/ -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, u16 I2C_PECPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); - - if (I2C_PECPosition == I2C_PECPosition_Next) - { - /* Next byte in shift register is PEC */ - I2Cx->CR1 |= I2C_PECPosition_Next; - } - else - { - /* Current byte in shift register is PEC */ - I2Cx->CR1 &= I2C_PECPosition_Current; - } -} - -/******************************************************************************* -* Function Name : I2C_CalculatePEC -* Description : Enables or disables the PEC value calculation of the -* transfered bytes. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx PEC value calculation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC calculation */ - I2Cx->CR1 |= CR1_ENPEC_Set; - } - else - { - /* Disable the selected I2C PEC calculation */ - I2Cx->CR1 &= CR1_ENPEC_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_GetPEC -* Description : Returns the PEC value for the specified I2C. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : The PEC value. -*******************************************************************************/ -u8 I2C_GetPEC(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Return the selected I2C PEC value */ - return ((I2Cx->SR2) >> 8); -} - -/******************************************************************************* -* Function Name : I2C_ARPCmd -* Description : Enables or disables the specified I2C ARP. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx ARP. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C ARP */ - I2Cx->CR1 |= CR1_ENARP_Set; - } - else - { - /* Disable the selected I2C ARP */ - I2Cx->CR1 &= CR1_ENARP_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_StretchClockCmd -* Description : Enables or disables the specified I2C Clock stretching. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - NewState: new state of the I2Cx Clock stretching. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState == DISABLE) - { - /* Enable the selected I2C Clock stretching */ - I2Cx->CR1 |= CR1_NOSTRETCH_Set; - } - else - { - /* Disable the selected I2C Clock stretching */ - I2Cx->CR1 &= CR1_NOSTRETCH_Reset; - } -} - -/******************************************************************************* -* Function Name : I2C_FastModeDutyCycleConfig -* Description : Selects the specified I2C fast mode duty cycle. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_DutyCycle: specifies the fast mode duty cycle. -* This parameter can be one of the following values: -* - I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 -* - I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 -* Output : None -* Return : None -*******************************************************************************/ -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, u16 I2C_DutyCycle) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); - - if (I2C_DutyCycle != I2C_DutyCycle_16_9) - { - /* I2C fast mode Tlow/Thigh=2 */ - I2Cx->CCR &= I2C_DutyCycle_2; - } - else - { - /* I2C fast mode Tlow/Thigh=16/9 */ - I2Cx->CCR |= I2C_DutyCycle_16_9; - } -} - -/******************************************************************************* -* Function Name : I2C_GetLastEvent -* Description : Returns the last I2Cx Event. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* Output : None -* Return : The last event -*******************************************************************************/ -u32 I2C_GetLastEvent(I2C_TypeDef* I2Cx) -{ - u32 lastevent = 0; - u32 flag1 = 0, flag2 = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - - /* Return status */ - return lastevent; -} - -/******************************************************************************* -* Function Name : I2C_CheckEvent -* Description : Checks whether the last I2Cx Event is equal to the one passed -* as parameter. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_EVENT: specifies the event to be checked. -* This parameter can be one of the following values: -* - I2C_EVENT_SLAVE_ADDRESS_MATCHED : EV1 -* - I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 -* - I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 -* - I2C_EVENT_SLAVE_ACK_FAILURE : EV3-2 -* - I2C_EVENT_MASTER_MODE_SELECT : EV5 -* - I2C_EVENT_MASTER_MODE_SELECTED : EV6 -* - I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 -* - I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8 -* - I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 -* - I2C_EVENT_SLAVE_STOP_DETECTED : EV4 -* Output : None -* Return : An ErrorStatus enumuration value: -* - SUCCESS: Last event is equal to the I2C_EVENT -* - ERROR: Last event is different from the I2C_EVENT -*******************************************************************************/ -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, u32 I2C_EVENT) -{ - u32 lastevent = 0; - u32 flag1 = 0, flag2 = 0; - ErrorStatus status = ERROR; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_EVENT(I2C_EVENT)); - - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - - /* Check whether the last event is equal to I2C_EVENT */ - if (lastevent == I2C_EVENT ) - { - /* SUCCESS: last event is equal to I2C_EVENT */ - status = SUCCESS; - } - else - { - /* ERROR: last event is different from I2C_EVENT */ - status = ERROR; - } - - /* Return status */ - return status; -} - -/******************************************************************************* -* Function Name : I2C_GetFlagStatus -* Description : Checks whether the specified I2C flag is set or not. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - I2C_FLAG_DUALF: Dual flag (Slave mode) -* - I2C_FLAG_SMBHOST: SMBus host header (Slave mode) -* - I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) -* - I2C_FLAG_GENCALL: General call header flag (Slave mode) -* - I2C_FLAG_TRA: Transmitter/Receiver flag -* - I2C_FLAG_BUSY: Bus busy flag -* - I2C_FLAG_MSL: Master/Slave flag -* - I2C_FLAG_SMBALERT: SMBus Alert flag -* - I2C_FLAG_TIMEOUT: Timeout or Tlow error flag -* - I2C_FLAG_PECERR: PEC error in reception flag -* - I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_FLAG_AF: Acknowledge failure flag -* - I2C_FLAG_ARLO: Arbitration lost flag (Master mode) -* - I2C_FLAG_BERR: Bus error flag -* - I2C_FLAG_TXE: Data register empty flag (Transmitter) -* - I2C_FLAG_RXNE: Data register not empty (Receiver) flag -* - I2C_FLAG_STOPF: Stop detection flag (Slave mode) -* - I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) -* - I2C_FLAG_BTF: Byte transfer finished flag -* - I2C_FLAG_ADDR: Address sent flag (Master mode) “ADSL -* Address matched flag (Slave mode)”ENDAD -* - I2C_FLAG_SB: Start bit flag (Master mode) -* Output : None -* Return : The new state of I2C_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u32 I2C_FLAG) -{ - FlagStatus bitstatus = RESET; - vu32 i2creg = 0, i2cxbase = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); - - /* Get the I2Cx peripheral base address */ - i2cxbase = (*(u32*)&(I2Cx)); - - /* Read flag register index */ - i2creg = I2C_FLAG >> 28; - - /* Get bit[23:0] of the flag */ - I2C_FLAG &= FLAG_Mask; - - if(i2creg != 0) - { - /* Get the I2Cx SR1 register address */ - i2cxbase += 0x14; - } - else - { - /* Flag in I2Cx SR2 Register */ - I2C_FLAG = (u32)(I2C_FLAG >> 16); - /* Get the I2Cx SR2 register address */ - i2cxbase += 0x18; - } - - if(((*(vu32 *)i2cxbase) & I2C_FLAG) != (u32)RESET) - { - /* I2C_FLAG is set */ - bitstatus = SET; - } - else - { - /* I2C_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the I2C_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : I2C_ClearFlag -* Description : Clears the I2Cx's pending flags. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following -* values: -* - I2C_FLAG_SMBALERT: SMBus Alert flag -* - I2C_FLAG_TIMEOUT: Timeout or Tlow error flag -* - I2C_FLAG_PECERR: PEC error in reception flag -* - I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_FLAG_AF: Acknowledge failure flag -* - I2C_FLAG_ARLO: Arbitration lost flag (Master mode) -* - I2C_FLAG_BERR: Bus error flag -* -* Notes: -* - STOPF (STOP detection) is cleared by software -* sequence: a read operation to I2C_SR1 register -* (I2C_GetFlagStatus()) followed by a write operation -* to I2C_CR1 register (I2C_Cmd() to re-enable the -* I2C peripheral). -* - ADD10 (10-bit header sent) is cleared by software -* sequence: a read operation to I2C_SR1 -* (I2C_GetFlagStatus()) followed by writing the -* second byte of the address in DR register. -* - BTF (Byte Transfer Finished) is cleared by software -* sequence: a read operation to I2C_SR1 register -* (I2C_GetFlagStatus()) followed by a read/write to -* I2C_DR register (I2C_SendData()). -* - ADDR (Address sent) is cleared by software sequence: -* a read operation to I2C_SR1 register -* (I2C_GetFlagStatus()) followed by a read operation to -* I2C_SR2 register ((void)(I2Cx->SR2)). -* - SB (Start Bit) is cleared software sequence: a read -* operation to I2C_SR1 register (I2C_GetFlagStatus()) -* followed by a write operation to I2C_DR reigister -* (I2C_SendData()). -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ClearFlag(I2C_TypeDef* I2Cx, u32 I2C_FLAG) -{ - u32 flagpos = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); - - /* Get the I2C flag position */ - flagpos = I2C_FLAG & FLAG_Mask; - - /* Clear the selected I2C flag */ - I2Cx->SR1 = (u16)~flagpos; -} - -/******************************************************************************* -* Function Name : I2C_GetITStatus -* Description : Checks whether the specified I2C interrupt has occurred or not. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_IT: specifies the interrupt source to check. -* This parameter can be one of the following values: -* - I2C_IT_SMBALERT: SMBus Alert flag -* - I2C_IT_TIMEOUT: Timeout or Tlow error flag -* - I2C_IT_PECERR: PEC error in reception flag -* - I2C_IT_OVR: Overrun/Underrun flag (Slave mode) -* - I2C_IT_AF: Acknowledge failure flag -* - I2C_IT_ARLO: Arbitration lost flag (Master mode) -* - I2C_IT_BERR: Bus error flag -* - I2C_IT_TXE: Data register empty flag (Transmitter) -* - I2C_IT_RXNE: Data register not empty (Receiver) flag -* - I2C_IT_STOPF: Stop detection flag (Slave mode) -* - I2C_IT_ADD10: 10-bit header sent flag (Master mode) -* - I2C_IT_BTF: Byte transfer finished flag -* - I2C_IT_ADDR: Address sent flag (Master mode) “ADSL -* Address matched flag (Slave mode)”ENDAD -* - I2C_IT_SB: Start bit flag (Master mode) -* Output : None -* Return : The new state of I2C_IT (SET or RESET). -*******************************************************************************/ -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, u32 I2C_IT) -{ - ITStatus bitstatus = RESET; - u32 enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_IT(I2C_IT)); - - /* Check if the interrupt source is enabled or not */ - enablestatus = (u32)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ; - - /* Get bit[23:0] of the flag */ - I2C_IT &= FLAG_Mask; - - /* Check the status of the specified I2C flag */ - if (((I2Cx->SR1 & I2C_IT) != (u32)RESET) && enablestatus) - { - /* I2C_IT is set */ - bitstatus = SET; - } - else - { - /* I2C_IT is reset */ - bitstatus = RESET; - } - /* Return the I2C_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : I2C_ClearITPendingBit -* Description : Clears the I2Cx’s interrupt pending bits. -* Input : - I2Cx: where x can be 1 or 2 to select the I2C peripheral. -* - I2C_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following -* values: -* - I2C_IT_SMBALERT: SMBus Alert interrupt -* - I2C_IT_TIMEOUT: Timeout or Tlow error interrupt -* - I2C_IT_PECERR: PEC error in reception interrupt -* - I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) -* - I2C_IT_AF: Acknowledge failure interrupt -* - I2C_IT_ARLO: Arbitration lost interrupt (Master mode) -* - I2C_IT_BERR: Bus error interrupt -* -* Notes: -* - STOPF (STOP detection) is cleared by software -* sequence: a read operation to I2C_SR1 register -* (I2C_GetITStatus()) followed by a write operation to -* I2C_CR1 register (I2C_Cmd() to re-enable the I2C -* peripheral). -* - ADD10 (10-bit header sent) is cleared by software -* sequence: a read operation to I2C_SR1 -* (I2C_GetITStatus()) followed by writing the second -* byte of the address in I2C_DR register. -* - BTF (Byte Transfer Finished) is cleared by software -* sequence: a read operation to I2C_SR1 register -* (I2C_GetITStatus()) followed by a read/write to -* I2C_DR register (I2C_SendData()). -* - ADDR (Address sent) is cleared by software sequence: -* a read operation to I2C_SR1 register (I2C_GetITStatus()) -* followed by a read operation to I2C_SR2 register -* ((void)(I2Cx->SR2)). -* - SB (Start Bit) is cleared by software sequence: a -* read operation to I2C_SR1 register (I2C_GetITStatus()) -* followed by a write operation to I2C_DR reigister -* (I2C_SendData()). -* Output : None -* Return : None -*******************************************************************************/ -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, u32 I2C_IT) -{ - u32 flagpos = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_IT(I2C_IT)); - - /* Get the I2C flag position */ - flagpos = I2C_IT & FLAG_Mask; - - /* Clear the selected I2C flag */ - I2Cx->SR1 = (u16)~flagpos; -} - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_iwdg.c b/bsp/stm32/library/src/stm32f10x_iwdg.c deleted file mode 100644 index b75a4f97c..000000000 --- a/bsp/stm32/library/src/stm32f10x_iwdg.c +++ /dev/null @@ -1,148 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_iwdg.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the IWDG firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_iwdg.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ---------------------- IWDG registers bit mask ------------------------ */ -/* KR register bit mask */ -#define KR_KEY_Reload ((u16)0xAAAA) -#define KR_KEY_Enable ((u16)0xCCCC) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : IWDG_WriteAccessCmd -* Description : Enables or disables write access to IWDG_PR and IWDG_RLR -* registers. -* Input : - IWDG_WriteAccess: new state of write access to IWDG_PR and -* IWDG_RLR registers. -* This parameter can be one of the following values: -* - IWDG_WriteAccess_Enable: Enable write access to -* IWDG_PR and IWDG_RLR registers -* - IWDG_WriteAccess_Disable: Disable write access to -* IWDG_PR and IWDG_RLR registers -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_WriteAccessCmd(u16 IWDG_WriteAccess) -{ - /* Check the parameters */ - assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); - - IWDG->KR = IWDG_WriteAccess; -} - -/******************************************************************************* -* Function Name : IWDG_SetPrescaler -* Description : Sets IWDG Prescaler value. -* Input : - IWDG_Prescaler: specifies the IWDG Prescaler value. -* This parameter can be one of the following values: -* - IWDG_Prescaler_4: IWDG prescaler set to 4 -* - IWDG_Prescaler_8: IWDG prescaler set to 8 -* - IWDG_Prescaler_16: IWDG prescaler set to 16 -* - IWDG_Prescaler_32: IWDG prescaler set to 32 -* - IWDG_Prescaler_64: IWDG prescaler set to 64 -* - IWDG_Prescaler_128: IWDG prescaler set to 128 -* - IWDG_Prescaler_256: IWDG prescaler set to 256 -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_SetPrescaler(u8 IWDG_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); - - IWDG->PR = IWDG_Prescaler; -} - -/******************************************************************************* -* Function Name : IWDG_SetReload -* Description : Sets IWDG Reload value. -* Input : - Reload: specifies the IWDG Reload value. -* This parameter must be a number between 0 and 0x0FFF. -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_SetReload(u16 Reload) -{ - /* Check the parameters */ - assert_param(IS_IWDG_RELOAD(Reload)); - - IWDG->RLR = Reload; -} - -/******************************************************************************* -* Function Name : IWDG_ReloadCounter -* Description : Reloads IWDG counter with value defined in the reload register -* (write access to IWDG_PR and IWDG_RLR registers disabled). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_ReloadCounter(void) -{ - IWDG->KR = KR_KEY_Reload; -} - -/******************************************************************************* -* Function Name : IWDG_Enable -* Description : Enables IWDG (write access to IWDG_PR and IWDG_RLR registers -* disabled). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void IWDG_Enable(void) -{ - IWDG->KR = KR_KEY_Enable; -} - -/******************************************************************************* -* Function Name : IWDG_GetFlagStatus -* Description : Checks whether the specified IWDG flag is set or not. -* Input : - IWDG_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - IWDG_FLAG_PVU: Prescaler Value Update on going -* - IWDG_FLAG_RVU: Reload Value Update on going -* Output : None -* Return : The new state of IWDG_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus IWDG_GetFlagStatus(u16 IWDG_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_IWDG_FLAG(IWDG_FLAG)); - - if ((IWDG->SR & IWDG_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_lib.c b/bsp/stm32/library/src/stm32f10x_lib.c deleted file mode 100644 index c39d38b41..000000000 --- a/bsp/stm32/library/src/stm32f10x_lib.c +++ /dev/null @@ -1,303 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_lib.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all peripherals pointers initialization. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -#define EXT - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -#ifdef DEBUG -/******************************************************************************* -* Function Name : debug -* Description : This function initialize peripherals pointers. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void debug(void) -{ - -/************************************* ADC ************************************/ -#ifdef _ADC1 - ADC1 = (ADC_TypeDef *) ADC1_BASE; -#endif /*_ADC1 */ - -#ifdef _ADC2 - ADC2 = (ADC_TypeDef *) ADC2_BASE; -#endif /*_ADC2 */ - -#ifdef _ADC3 - ADC3 = (ADC_TypeDef *) ADC3_BASE; -#endif /*_ADC3 */ - -/************************************* BKP ************************************/ -#ifdef _BKP - BKP = (BKP_TypeDef *) BKP_BASE; -#endif /*_BKP */ - -/************************************* CAN ************************************/ -#ifdef _CAN - CAN = (CAN_TypeDef *) CAN_BASE; -#endif /*_CAN */ - -/************************************* CRC ************************************/ -#ifdef _CRC - CRC = (CRC_TypeDef *) CRC_BASE; -#endif /*_CRC */ - -/************************************* DAC ************************************/ -#ifdef _DAC - DAC = (DAC_TypeDef *) DAC_BASE; -#endif /*_DAC */ - -/************************************* DBGMCU**********************************/ -#ifdef _DBGMCU - DBGMCU = (DBGMCU_TypeDef *) DBGMCU_BASE; -#endif /*_DBGMCU */ - -/************************************* DMA ************************************/ -#ifdef _DMA - DMA1 = (DMA_TypeDef *) DMA1_BASE; - DMA2 = (DMA_TypeDef *) DMA2_BASE; -#endif /*_DMA */ - -#ifdef _DMA1_Channel1 - DMA1_Channel1 = (DMA_Channel_TypeDef *) DMA1_Channel1_BASE; -#endif /*_DMA1_Channel1 */ - -#ifdef _DMA1_Channel2 - DMA1_Channel2 = (DMA_Channel_TypeDef *) DMA1_Channel2_BASE; -#endif /*_DMA1_Channel2 */ - -#ifdef _DMA1_Channel3 - DMA1_Channel3 = (DMA_Channel_TypeDef *) DMA1_Channel3_BASE; -#endif /*_DMA1_Channel3 */ - -#ifdef _DMA1_Channel4 - DMA1_Channel4 = (DMA_Channel_TypeDef *) DMA1_Channel4_BASE; -#endif /*_DMA1_Channel4 */ - -#ifdef _DMA1_Channel5 - DMA1_Channel5 = (DMA_Channel_TypeDef *) DMA1_Channel5_BASE; -#endif /*_DMA1_Channel5 */ - -#ifdef _DMA1_Channel6 - DMA1_Channel6 = (DMA_Channel_TypeDef *) DMA1_Channel6_BASE; -#endif /*_DMA1_Channel6 */ - -#ifdef _DMA1_Channel7 - DMA1_Channel7 = (DMA_Channel_TypeDef *) DMA1_Channel7_BASE; -#endif /*_DMA1_Channel7 */ - -#ifdef _DMA2_Channel1 - DMA2_Channel1 = (DMA_Channel_TypeDef *) DMA2_Channel1_BASE; -#endif /*_DMA2_Channel1 */ - -#ifdef _DMA2_Channel2 - DMA2_Channel2 = (DMA_Channel_TypeDef *) DMA2_Channel2_BASE; -#endif /*_DMA2_Channel2 */ - -#ifdef _DMA2_Channel3 - DMA2_Channel3 = (DMA_Channel_TypeDef *) DMA2_Channel3_BASE; -#endif /*_DMA2_Channel3 */ - -#ifdef _DMA2_Channel4 - DMA2_Channel4 = (DMA_Channel_TypeDef *) DMA2_Channel4_BASE; -#endif /*_DMA2_Channel4 */ - -#ifdef _DMA2_Channel5 - DMA2_Channel5 = (DMA_Channel_TypeDef *) DMA2_Channel5_BASE; -#endif /*_DMA2_Channel5 */ - -/************************************* EXTI ***********************************/ -#ifdef _EXTI - EXTI = (EXTI_TypeDef *) EXTI_BASE; -#endif /*_EXTI */ - -/************************************* FLASH and Option Bytes *****************/ -#ifdef _FLASH - FLASH = (FLASH_TypeDef *) FLASH_R_BASE; - OB = (OB_TypeDef *) OB_BASE; -#endif /*_FLASH */ - -/************************************* FSMC ***********************************/ -#ifdef _FSMC - FSMC_Bank1 = (FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE; - FSMC_Bank1E = (FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE; - FSMC_Bank2 = (FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE; - FSMC_Bank3 = (FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE; - FSMC_Bank4 = (FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE; -#endif /*_FSMC */ - -/************************************* GPIO ***********************************/ -#ifdef _GPIOA - GPIOA = (GPIO_TypeDef *) GPIOA_BASE; -#endif /*_GPIOA */ - -#ifdef _GPIOB - GPIOB = (GPIO_TypeDef *) GPIOB_BASE; -#endif /*_GPIOB */ - -#ifdef _GPIOC - GPIOC = (GPIO_TypeDef *) GPIOC_BASE; -#endif /*_GPIOC */ - -#ifdef _GPIOD - GPIOD = (GPIO_TypeDef *) GPIOD_BASE; -#endif /*_GPIOD */ - -#ifdef _GPIOE - GPIOE = (GPIO_TypeDef *) GPIOE_BASE; -#endif /*_GPIOE */ - -#ifdef _GPIOF - GPIOF = (GPIO_TypeDef *) GPIOF_BASE; -#endif /*_GPIOF */ - -#ifdef _GPIOG - GPIOG = (GPIO_TypeDef *) GPIOG_BASE; -#endif /*_GPIOG */ - -#ifdef _AFIO - AFIO = (AFIO_TypeDef *) AFIO_BASE; -#endif /*_AFIO */ - -/************************************* I2C ************************************/ -#ifdef _I2C1 - I2C1 = (I2C_TypeDef *) I2C1_BASE; -#endif /*_I2C1 */ - -#ifdef _I2C2 - I2C2 = (I2C_TypeDef *) I2C2_BASE; -#endif /*_I2C2 */ - -/************************************* IWDG ***********************************/ -#ifdef _IWDG - IWDG = (IWDG_TypeDef *) IWDG_BASE; -#endif /*_IWDG */ - -/************************************* NVIC ***********************************/ -#ifdef _NVIC - NVIC = (NVIC_TypeDef *) NVIC_BASE; - SCB = (SCB_TypeDef *) SCB_BASE; -#endif /*_NVIC */ - -/************************************* PWR ************************************/ -#ifdef _PWR - PWR = (PWR_TypeDef *) PWR_BASE; -#endif /*_PWR */ - -/************************************* RCC ************************************/ -#ifdef _RCC - RCC = (RCC_TypeDef *) RCC_BASE; -#endif /*_RCC */ - -/************************************* RTC ************************************/ -#ifdef _RTC - RTC = (RTC_TypeDef *) RTC_BASE; -#endif /*_RTC */ - -/************************************* SDIO ***********************************/ -#ifdef _SDIO - SDIO = (SDIO_TypeDef *) SDIO_BASE; -#endif /*_SDIO */ - -/************************************* SPI ************************************/ -#ifdef _SPI1 - SPI1 = (SPI_TypeDef *) SPI1_BASE; -#endif /*_SPI1 */ - -#ifdef _SPI2 - SPI2 = (SPI_TypeDef *) SPI2_BASE; -#endif /*_SPI2 */ - -#ifdef _SPI3 - SPI3 = (SPI_TypeDef *) SPI3_BASE; -#endif /*_SPI3 */ - -/************************************* SysTick ********************************/ -#ifdef _SysTick - SysTick = (SysTick_TypeDef *) SysTick_BASE; -#endif /*_SysTick */ - -/************************************* TIM ************************************/ -#ifdef _TIM1 - TIM1 = (TIM_TypeDef *) TIM1_BASE; -#endif /*_TIM1 */ - -#ifdef _TIM2 - TIM2 = (TIM_TypeDef *) TIM2_BASE; -#endif /*_TIM2 */ - -#ifdef _TIM3 - TIM3 = (TIM_TypeDef *) TIM3_BASE; -#endif /*_TIM3 */ - -#ifdef _TIM4 - TIM4 = (TIM_TypeDef *) TIM4_BASE; -#endif /*_TIM4 */ - -#ifdef _TIM5 - TIM5 = (TIM_TypeDef *) TIM5_BASE; -#endif /*_TIM5 */ - -#ifdef _TIM6 - TIM6 = (TIM_TypeDef *) TIM6_BASE; -#endif /*_TIM6 */ - -#ifdef _TIM7 - TIM7 = (TIM_TypeDef *) TIM7_BASE; -#endif /*_TIM7 */ - -#ifdef _TIM8 - TIM8 = (TIM_TypeDef *) TIM8_BASE; -#endif /*_TIM8 */ - -/************************************* USART **********************************/ -#ifdef _USART1 - USART1 = (USART_TypeDef *) USART1_BASE; -#endif /*_USART1 */ - -#ifdef _USART2 - USART2 = (USART_TypeDef *) USART2_BASE; -#endif /*_USART2 */ - -#ifdef _USART3 - USART3 = (USART_TypeDef *) USART3_BASE; -#endif /*_USART3 */ - -#ifdef _UART4 - UART4 = (USART_TypeDef *) UART4_BASE; -#endif /*_UART4 */ - -#ifdef _UART5 - UART5 = (USART_TypeDef *) UART5_BASE; -#endif /*_UART5 */ - -/************************************* WWDG ***********************************/ -#ifdef _WWDG - WWDG = (WWDG_TypeDef *) WWDG_BASE; -#endif /*_WWDG */ -} -#endif /* DEBUG*/ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_nvic.c b/bsp/stm32/library/src/stm32f10x_nvic.c deleted file mode 100644 index 40c6fe324..000000000 --- a/bsp/stm32/library/src/stm32f10x_nvic.c +++ /dev/null @@ -1,751 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_nvic.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the NVIC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_nvic.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define AIRCR_VECTKEY_MASK ((u32)0x05FA0000) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : NVIC_DeInit -* Description : Deinitializes the NVIC peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_DeInit(void) -{ - u32 index = 0; - - NVIC->ICER[0] = 0xFFFFFFFF; - NVIC->ICER[1] = 0x0FFFFFFF; - NVIC->ICPR[0] = 0xFFFFFFFF; - NVIC->ICPR[1] = 0x0FFFFFFF; - - for(index = 0; index < 0x0F; index++) - { - NVIC->IPR[index] = 0x00000000; - } -} - -/******************************************************************************* -* Function Name : NVIC_SCBDeInit -* Description : Deinitializes the SCB peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SCBDeInit(void) -{ - u32 index = 0x00; - - SCB->ICSR = 0x0A000000; - SCB->VTOR = 0x00000000; - SCB->AIRCR = AIRCR_VECTKEY_MASK; - SCB->SCR = 0x00000000; - SCB->CCR = 0x00000000; - for(index = 0; index < 0x03; index++) - { - SCB->SHPR[index] = 0; - } - SCB->SHCSR = 0x00000000; - SCB->CFSR = 0xFFFFFFFF; - SCB->HFSR = 0xFFFFFFFF; - SCB->DFSR = 0xFFFFFFFF; -} - -/******************************************************************************* -* Function Name : NVIC_PriorityGroupConfig -* Description : Configures the priority grouping: pre-emption priority -* and subpriority. -* Input : - NVIC_PriorityGroup: specifies the priority grouping bits -* length. This parameter can be one of the following values: -* - NVIC_PriorityGroup_0: 0 bits for pre-emption priority -* 4 bits for subpriority -* - NVIC_PriorityGroup_1: 1 bits for pre-emption priority -* 3 bits for subpriority -* - NVIC_PriorityGroup_2: 2 bits for pre-emption priority -* 2 bits for subpriority -* - NVIC_PriorityGroup_3: 3 bits for pre-emption priority -* 1 bits for subpriority -* - NVIC_PriorityGroup_4: 4 bits for pre-emption priority -* 0 bits for subpriority -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_PriorityGroupConfig(u32 NVIC_PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ - SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; -} - -/******************************************************************************* -* Function Name : NVIC_Init -* Description : Initializes the NVIC peripheral according to the specified -* parameters in the NVIC_InitStruct. -* Input : - NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure -* that contains the configuration information for the -* specified NVIC peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) -{ - u32 tmppriority = 0x00, tmpreg = 0x00, tmpmask = 0x00; - u32 tmppre = 0, tmpsub = 0x0F; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_InitStruct->NVIC_IRQChannel)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); - - if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) - { - /* Compute the Corresponding IRQ Priority --------------------------------*/ - tmppriority = (0x700 - (SCB->AIRCR & (u32)0x700))>> 0x08; - tmppre = (0x4 - tmppriority); - tmpsub = tmpsub >> tmppriority; - - tmppriority = (u32)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; - tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; - - tmppriority = tmppriority << 0x04; - tmppriority = ((u32)tmppriority) << ((NVIC_InitStruct->NVIC_IRQChannel & (u8)0x03) * 0x08); - - tmpreg = NVIC->IPR[(NVIC_InitStruct->NVIC_IRQChannel >> 0x02)]; - tmpmask = (u32)0xFF << ((NVIC_InitStruct->NVIC_IRQChannel & (u8)0x03) * 0x08); - tmpreg &= ~tmpmask; - tmppriority &= tmpmask; - tmpreg |= tmppriority; - - NVIC->IPR[(NVIC_InitStruct->NVIC_IRQChannel >> 0x02)] = tmpreg; - - /* Enable the Selected IRQ Channels --------------------------------------*/ - NVIC->ISER[(NVIC_InitStruct->NVIC_IRQChannel >> 0x05)] = - (u32)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (u8)0x1F); - } - else - { - /* Disable the Selected IRQ Channels -------------------------------------*/ - NVIC->ICER[(NVIC_InitStruct->NVIC_IRQChannel >> 0x05)] = - (u32)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (u8)0x1F); - } -} - -/******************************************************************************* -* Function Name : NVIC_StructInit -* Description : Fills each NVIC_InitStruct member with its default value. -* Input : - NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure which -* will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_StructInit(NVIC_InitTypeDef* NVIC_InitStruct) -{ - /* NVIC_InitStruct members default value */ - NVIC_InitStruct->NVIC_IRQChannel = 0x00; - NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority = 0x00; - NVIC_InitStruct->NVIC_IRQChannelSubPriority = 0x00; - NVIC_InitStruct->NVIC_IRQChannelCmd = DISABLE; -} - -/******************************************************************************* -* Function Name : NVIC_SETPRIMASK -* Description : Enables the PRIMASK priority: Raises the execution priority to 0. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SETPRIMASK(void) -{ - __SETPRIMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_RESETPRIMASK -* Description : Disables the PRIMASK priority. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_RESETPRIMASK(void) -{ - __RESETPRIMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_SETFAULTMASK -* Description : Enables the FAULTMASK priority: Raises the execution priority to -1. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SETFAULTMASK(void) -{ - __SETFAULTMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_RESETFAULTMASK -* Description : Disables the FAULTMASK priority. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_RESETFAULTMASK(void) -{ - __RESETFAULTMASK(); -} - -/******************************************************************************* -* Function Name : NVIC_BASEPRICONFIG -* Description : The execution priority can be changed from 15 (lowest - configurable priority) to 1. Writing a zero value will disable -* the mask of execution priority. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_BASEPRICONFIG(u32 NewPriority) -{ - /* Check the parameters */ - assert_param(IS_NVIC_BASE_PRI(NewPriority)); - - __BASEPRICONFIG(NewPriority << 0x04); -} - -/******************************************************************************* -* Function Name : NVIC_GetBASEPRI -* Description : Returns the BASEPRI mask value. -* Input : None -* Output : None -* Return : BASEPRI register value -*******************************************************************************/ -u32 NVIC_GetBASEPRI(void) -{ - return (__GetBASEPRI()); -} - -/******************************************************************************* -* Function Name : NVIC_GetCurrentPendingIRQChannel -* Description : Returns the current pending IRQ channel identifier. -* Input : None -* Output : None -* Return : Pending IRQ Channel Identifier. -*******************************************************************************/ -u16 NVIC_GetCurrentPendingIRQChannel(void) -{ - return ((u16)((SCB->ICSR & (u32)0x003FF000) >> 0x0C)); -} - -/******************************************************************************* -* Function Name : NVIC_GetIRQChannelPendingBitStatus -* Description : Checks whether the specified IRQ Channel pending bit is set -* or not. -* Input : - NVIC_IRQChannel: specifies the interrupt pending bit to check. -* Output : None -* Return : The new state of IRQ Channel pending bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetIRQChannelPendingBitStatus(u8 NVIC_IRQChannel) -{ - ITStatus pendingirqstatus = RESET; - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - tmp = ((u32)0x01 << (NVIC_IRQChannel & (u32)0x1F)); - - if (((NVIC->ISPR[(NVIC_IRQChannel >> 0x05)]) & tmp) == tmp) - { - pendingirqstatus = SET; - } - else - { - pendingirqstatus = RESET; - } - return pendingirqstatus; -} - -/******************************************************************************* -* Function Name : NVIC_SetIRQChannelPendingBit -* Description : Sets the NVIC’s interrupt pending bit. -* Input : - NVIC_IRQChannel: specifies the interrupt pending bit to Set. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SetIRQChannelPendingBit(u8 NVIC_IRQChannel) -{ - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - *(vu32*) 0xE000EF00 = (u32)NVIC_IRQChannel; -} - -/******************************************************************************* -* Function Name : NVIC_ClearIRQChannelPendingBit -* Description : Clears the NVIC’s interrupt pending bit. -* Input : - NVIC_IRQChannel: specifies the interrupt pending bit to clear. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_ClearIRQChannelPendingBit(u8 NVIC_IRQChannel) -{ - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - NVIC->ICPR[(NVIC_IRQChannel >> 0x05)] = (u32)0x01 << (NVIC_IRQChannel & (u32)0x1F); -} - -/******************************************************************************* -* Function Name : NVIC_GetCurrentActiveHandler -* Description : Returns the current active Handler (IRQ Channel and -* SystemHandler) identifier. -* Input : None -* Output : None -* Return : Active Handler Identifier. -*******************************************************************************/ -u16 NVIC_GetCurrentActiveHandler(void) -{ - return ((u16)(SCB->ICSR & (u32)0x3FF)); -} - -/******************************************************************************* -* Function Name : NVIC_GetIRQChannelActiveBitStatus -* Description : Checks whether the specified IRQ Channel active bit is set -* or not. -* Input : - NVIC_IRQChannel: specifies the interrupt active bit to check. -* Output : None -* Return : The new state of IRQ Channel active bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetIRQChannelActiveBitStatus(u8 NVIC_IRQChannel) -{ - ITStatus activeirqstatus = RESET; - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_NVIC_IRQ_CHANNEL(NVIC_IRQChannel)); - - tmp = ((u32)0x01 << (NVIC_IRQChannel & (u32)0x1F)); - - if (((NVIC->IABR[(NVIC_IRQChannel >> 0x05)]) & tmp) == tmp ) - { - activeirqstatus = SET; - } - else - { - activeirqstatus = RESET; - } - return activeirqstatus; -} - -/******************************************************************************* -* Function Name : NVIC_GetCPUID -* Description : Returns the ID number, the version number and the implementation -* details of the Cortex-M3 core. -* Input : None -* Output : None -* Return : CPU ID. -*******************************************************************************/ -u32 NVIC_GetCPUID(void) -{ - return (SCB->CPUID); -} - -/******************************************************************************* -* Function Name : NVIC_SetVectorTable -* Description : Sets the vector table location and Offset. -* Input : - NVIC_VectTab: specifies if the vector table is in RAM or -* FLASH memory. -* This parameter can be one of the following values: -* - NVIC_VectTab_RAM -* - NVIC_VectTab_FLASH -* - Offset: Vector Table base offset field. -* This value must be a multiple of 0x100. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SetVectorTable(u32 NVIC_VectTab, u32 Offset) -{ - /* Check the parameters */ - assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); - assert_param(IS_NVIC_OFFSET(Offset)); - - SCB->VTOR = NVIC_VectTab | (Offset & (u32)0x1FFFFF80); -} - -/******************************************************************************* -* Function Name : NVIC_GenerateSystemReset -* Description : Generates a system reset. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_GenerateSystemReset(void) -{ - SCB->AIRCR = AIRCR_VECTKEY_MASK | (u32)0x04; -} - -/******************************************************************************* -* Function Name : NVIC_GenerateCoreReset -* Description : Generates a Core (Core + NVIC) reset. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_GenerateCoreReset(void) -{ - SCB->AIRCR = AIRCR_VECTKEY_MASK | (u32)0x01; -} - -/******************************************************************************* -* Function Name : NVIC_SystemLPConfig -* Description : Selects the condition for the system to enter low power mode. -* Input : - LowPowerMode: Specifies the new mode for the system to enter -* low power mode. -* This parameter can be one of the following values: -* - NVIC_LP_SEVONPEND -* - NVIC_LP_SLEEPDEEP -* - NVIC_LP_SLEEPONEXIT -* - NewState: new state of LP condition. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SystemLPConfig(u8 LowPowerMode, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_NVIC_LP(LowPowerMode)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SCB->SCR |= LowPowerMode; - } - else - { - SCB->SCR &= (u32)(~(u32)LowPowerMode); - } -} - -/******************************************************************************* -* Function Name : NVIC_SystemHandlerConfig -* Description : Enables or disables the specified System Handlers. -* Input : - SystemHandler: specifies the system handler to be enabled -* or disabled. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - NewState: new state of specified System Handlers. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SystemHandlerConfig(u32 SystemHandler, FunctionalState NewState) -{ - u32 tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_CONFIG_SYSTEM_HANDLER(SystemHandler)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - tmpreg = (u32)0x01 << (SystemHandler & (u32)0x1F); - - if (NewState != DISABLE) - { - SCB->SHCSR |= tmpreg; - } - else - { - SCB->SHCSR &= ~tmpreg; - } -} - -/******************************************************************************* -* Function Name : NVIC_SystemHandlerPriorityConfig -* Description : Configures the specified System Handlers priority. -* Input : - SystemHandler: specifies the system handler to be -* enabled or disabled. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - SystemHandler_SVCall -* - SystemHandler_DebugMonitor -* - SystemHandler_PSV -* - SystemHandler_SysTick -* - SystemHandlerPreemptionPriority: new priority group of the -* specified system handlers. -* - SystemHandlerSubPriority: new sub priority of the specified -* system handlers. -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SystemHandlerPriorityConfig(u32 SystemHandler, u8 SystemHandlerPreemptionPriority, - u8 SystemHandlerSubPriority) -{ - u32 tmp1 = 0x00, tmp2 = 0xFF, handlermask = 0x00; - u32 tmppriority = 0x00; - - /* Check the parameters */ - assert_param(IS_PRIORITY_SYSTEM_HANDLER(SystemHandler)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(SystemHandlerPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(SystemHandlerSubPriority)); - - tmppriority = (0x700 - (SCB->AIRCR & (u32)0x700))>> 0x08; - tmp1 = (0x4 - tmppriority); - tmp2 = tmp2 >> tmppriority; - - tmppriority = (u32)SystemHandlerPreemptionPriority << tmp1; - tmppriority |= SystemHandlerSubPriority & tmp2; - - tmppriority = tmppriority << 0x04; - tmp1 = SystemHandler & (u32)0xC0; - tmp1 = tmp1 >> 0x06; - tmp2 = (SystemHandler >> 0x08) & (u32)0x03; - tmppriority = tmppriority << (tmp2 * 0x08); - handlermask = (u32)0xFF << (tmp2 * 0x08); - - SCB->SHPR[tmp1] &= ~handlermask; - SCB->SHPR[tmp1] |= tmppriority; -} - -/******************************************************************************* -* Function Name : NVIC_GetSystemHandlerPendingBitStatus -* Description : Checks whether the specified System handlers pending bit is -* set or not. -* Input : - SystemHandler: specifies the system handler pending bit to -* check. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_SVCall -* Output : None -* Return : The new state of System Handler pending bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetSystemHandlerPendingBitStatus(u32 SystemHandler) -{ - ITStatus bitstatus = RESET; - u32 tmp = 0x00, tmppos = 0x00; - - /* Check the parameters */ - assert_param(IS_GET_PENDING_SYSTEM_HANDLER(SystemHandler)); - - tmppos = (SystemHandler >> 0x0A); - tmppos &= (u32)0x0F; - - tmppos = (u32)0x01 << tmppos; - - tmp = SCB->SHCSR & tmppos; - - if (tmp == tmppos) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : NVIC_SetSystemHandlerPendingBit -* Description : Sets System Handler pending bit. -* Input : - SystemHandler: specifies the system handler pending bit -* to be set. -* This parameter can be one of the following values: -* - SystemHandler_NMI -* - SystemHandler_PSV -* - SystemHandler_SysTick -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_SetSystemHandlerPendingBit(u32 SystemHandler) -{ - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_SET_PENDING_SYSTEM_HANDLER(SystemHandler)); - - /* Get the System Handler pending bit position */ - tmp = SystemHandler & (u32)0x1F; - /* Set the corresponding System Handler pending bit */ - SCB->ICSR |= ((u32)0x01 << tmp); -} - -/******************************************************************************* -* Function Name : NVIC_ClearSystemHandlerPendingBit -* Description : Clears System Handler pending bit. -* Input : - SystemHandler: specifies the system handler pending bit to -* be clear. -* This parameter can be one of the following values: -* - SystemHandler_PSV -* - SystemHandler_SysTick -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_ClearSystemHandlerPendingBit(u32 SystemHandler) -{ - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_CLEAR_SYSTEM_HANDLER(SystemHandler)); - - /* Get the System Handler pending bit position */ - tmp = SystemHandler & (u32)0x1F; - /* Clear the corresponding System Handler pending bit */ - SCB->ICSR |= ((u32)0x01 << (tmp - 0x01)); -} - -/******************************************************************************* -* Function Name : NVIC_GetSystemHandlerActiveBitStatus -* Description : Checks whether the specified System handlers active bit is -* set or not. -* Input : - SystemHandler: specifies the system handler active bit to -* check. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - SystemHandler_SVCall -* - SystemHandler_DebugMonitor -* - SystemHandler_PSV -* - SystemHandler_SysTick -* Output : None -* Return : The new state of System Handler active bit(SET or RESET). -*******************************************************************************/ -ITStatus NVIC_GetSystemHandlerActiveBitStatus(u32 SystemHandler) -{ - ITStatus bitstatus = RESET; - - u32 tmp = 0x00, tmppos = 0x00; - - /* Check the parameters */ - assert_param(IS_GET_ACTIVE_SYSTEM_HANDLER(SystemHandler)); - - tmppos = (SystemHandler >> 0x0E) & (u32)0x0F; - - tmppos = (u32)0x01 << tmppos; - - tmp = SCB->SHCSR & tmppos; - - if (tmp == tmppos) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : NVIC_GetFaultHandlerSources -* Description : Returns the system fault handlers sources. -* Input : - SystemHandler: specifies the system handler to get its fault -* sources. -* This parameter can be one of the following values: -* - SystemHandler_HardFault -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* - SystemHandler_UsageFault -* - SystemHandler_DebugMonitor -* Output : None -* Return : Source of the fault handler. -*******************************************************************************/ -u32 NVIC_GetFaultHandlerSources(u32 SystemHandler) -{ - u32 faultsources = 0x00; - u32 tmpreg = 0x00, tmppos = 0x00; - - /* Check the parameters */ - assert_param(IS_FAULT_SOURCE_SYSTEM_HANDLER(SystemHandler)); - - tmpreg = (SystemHandler >> 0x12) & (u32)0x03; - tmppos = (SystemHandler >> 0x14) & (u32)0x03; - - if (tmpreg == 0x00) - { - faultsources = SCB->HFSR; - } - else if (tmpreg == 0x01) - { - faultsources = SCB->CFSR >> (tmppos * 0x08); - if (tmppos != 0x02) - { - faultsources &= (u32)0x0F; - } - else - { - faultsources &= (u32)0xFF; - } - } - else - { - faultsources = SCB->DFSR; - } - return faultsources; -} - -/******************************************************************************* -* Function Name : NVIC_GetFaultAddress -* Description : Returns the address of the location that generated a fault -* handler. -* Input : - SystemHandler: specifies the system handler to get its -* fault address. -* This parameter can be one of the following values: -* - SystemHandler_MemoryManage -* - SystemHandler_BusFault -* Output : None -* Return : Fault address. -*******************************************************************************/ -u32 NVIC_GetFaultAddress(u32 SystemHandler) -{ - u32 faultaddress = 0x00; - u32 tmp = 0x00; - - /* Check the parameters */ - assert_param(IS_FAULT_ADDRESS_SYSTEM_HANDLER(SystemHandler)); - - tmp = (SystemHandler >> 0x16) & (u32)0x01; - - if (tmp == 0x00) - { - faultaddress = SCB->MMFAR; - } - else - { - faultaddress = SCB->BFAR; - } - return faultaddress; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_pwr.c b/bsp/stm32/library/src/stm32f10x_pwr.c deleted file mode 100644 index b8b489132..000000000 --- a/bsp/stm32/library/src/stm32f10x_pwr.c +++ /dev/null @@ -1,280 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_pwr.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the PWR firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* --------- PWR registers bit address in the alias region ---------- */ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ -/* Alias word address of DBP bit */ -#define CR_OFFSET (PWR_OFFSET + 0x00) -#define DBP_BitNumber 0x08 -#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) - -/* Alias word address of PVDE bit */ -#define PVDE_BitNumber 0x04 -#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of EWUP bit */ -#define CSR_OFFSET (PWR_OFFSET + 0x04) -#define EWUP_BitNumber 0x08 -#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) - -/* ------------------ PWR registers bit mask ------------------------ */ -/* CR register bit mask */ -#define CR_PDDS_Set ((u32)0x00000002) -#define CR_DS_Mask ((u32)0xFFFFFFFC) -#define CR_CWUF_Set ((u32)0x00000004) -#define CR_PLS_Mask ((u32)0xFFFFFF1F) - -/* --------- Cortex System Control register bit mask ---------------- */ -/* Cortex System Control register address */ -#define SCB_SysCtrl ((u32)0xE000ED10) -/* SLEEPDEEP bit mask */ -#define SysCtrl_SLEEPDEEP_Set ((u32)0x00000004) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : PWR_DeInit -* Description : Deinitializes the PWR peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PWR_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); -} - -/******************************************************************************* -* Function Name : PWR_BackupAccessCmd -* Description : Enables or disables access to the RTC and backup registers. -* Input : - NewState: new state of the access to the RTC and backup -* registers. This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void PWR_BackupAccessCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_DBP_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : PWR_PVDCmd -* Description : Enables or disables the Power Voltage Detector(PVD). -* Input : - NewState: new state of the PVD. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void PWR_PVDCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_PVDE_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : PWR_PVDLevelConfig -* Description : Configures the voltage threshold detected by the Power Voltage -* Detector(PVD). -* Input : - PWR_PVDLevel: specifies the PVD detection level -* This parameter can be one of the following values: -* - PWR_PVDLevel_2V2: PVD detection level set to 2.2V -* - PWR_PVDLevel_2V3: PVD detection level set to 2.3V -* - PWR_PVDLevel_2V4: PVD detection level set to 2.4V -* - PWR_PVDLevel_2V5: PVD detection level set to 2.5V -* - PWR_PVDLevel_2V6: PVD detection level set to 2.6V -* - PWR_PVDLevel_2V7: PVD detection level set to 2.7V -* - PWR_PVDLevel_2V8: PVD detection level set to 2.8V -* - PWR_PVDLevel_2V9: PVD detection level set to 2.9V -* Output : None -* Return : None -*******************************************************************************/ -void PWR_PVDLevelConfig(u32 PWR_PVDLevel) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); - - tmpreg = PWR->CR; - - /* Clear PLS[7:5] bits */ - tmpreg &= CR_PLS_Mask; - - /* Set PLS[7:5] bits according to PWR_PVDLevel value */ - tmpreg |= PWR_PVDLevel; - - /* Store the new value */ - PWR->CR = tmpreg; -} - -/******************************************************************************* -* Function Name : PWR_WakeUpPinCmd -* Description : Enables or disables the WakeUp Pin functionality. -* Input : - NewState: new state of the WakeUp Pin functionality. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void PWR_WakeUpPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CSR_EWUP_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : PWR_EnterSTOPMode -* Description : Enters STOP mode. -* Input : - PWR_Regulator: specifies the regulator state in STOP mode. -* This parameter can be one of the following values: -* - PWR_Regulator_ON: STOP mode with regulator ON -* - PWR_Regulator_LowPower: STOP mode with -* regulator in low power mode -* - PWR_STOPEntry: specifies if STOP mode in entered with WFI or -* WFE instruction. -* This parameter can be one of the following values: -* - PWR_STOPEntry_WFI: enter STOP mode with WFI instruction -* - PWR_STOPEntry_WFE: enter STOP mode with WFE instruction -* Output : None -* Return : None -*******************************************************************************/ -void PWR_EnterSTOPMode(u32 PWR_Regulator, u8 PWR_STOPEntry) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(PWR_Regulator)); - assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg = PWR->CR; - - /* Clear PDDS and LPDS bits */ - tmpreg &= CR_DS_Mask; - - /* Set LPDS bit according to PWR_Regulator value */ - tmpreg |= PWR_Regulator; - - /* Store the new value */ - PWR->CR = tmpreg; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - *(vu32 *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set; - - /* Select STOP mode entry --------------------------------------------------*/ - if(PWR_STOPEntry == PWR_STOPEntry_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } -} - -/******************************************************************************* -* Function Name : PWR_EnterSTANDBYMode -* Description : Enters STANDBY mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PWR_EnterSTANDBYMode(void) -{ - /* Clear Wake-up flag */ - PWR->CR |= CR_CWUF_Set; - - /* Select STANDBY mode */ - PWR->CR |= CR_PDDS_Set; - - /* Set SLEEPDEEP bit of Cortex System Control Register */ - *(vu32 *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set; - - /* Request Wait For Interrupt */ - __WFI(); -} - -/******************************************************************************* -* Function Name : PWR_GetFlagStatus -* Description : Checks whether the specified PWR flag is set or not. -* Input : - PWR_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - PWR_FLAG_WU: Wake Up flag -* - PWR_FLAG_SB: StandBy flag -* - PWR_FLAG_PVDO: PVD Output -* Output : None -* Return : The new state of PWR_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus PWR_GetFlagStatus(u32 PWR_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); - - if ((PWR->CSR & PWR_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : PWR_ClearFlag -* Description : Clears the PWR's pending flags. -* Input : - PWR_FLAG: specifies the flag to clear. -* This parameter can be one of the following values: -* - PWR_FLAG_WU: Wake Up flag -* - PWR_FLAG_SB: StandBy flag -* Output : None -* Return : None -*******************************************************************************/ -void PWR_ClearFlag(u32 PWR_FLAG) -{ - /* Check the parameters */ - assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); - - PWR->CR |= PWR_FLAG << 2; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_rcc.c b/bsp/stm32/library/src/stm32f10x_rcc.c deleted file mode 100644 index ac5ea19c1..000000000 --- a/bsp/stm32/library/src/stm32f10x_rcc.c +++ /dev/null @@ -1,1105 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rcc.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the RCC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ------------ RCC registers bit address in the alias region ----------- */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ -/* Alias word address of HSION bit */ -#define CR_OFFSET (RCC_OFFSET + 0x00) -#define HSION_BitNumber 0x00 -#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) - -/* Alias word address of PLLON bit */ -#define PLLON_BitNumber 0x18 -#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) - -/* Alias word address of CSSON bit */ -#define CSSON_BitNumber 0x13 -#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) - -/* --- CFGR Register ---*/ -/* Alias word address of USBPRE bit */ -#define CFGR_OFFSET (RCC_OFFSET + 0x04) -#define USBPRE_BitNumber 0x16 -#define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) - -/* --- BDCR Register ---*/ -/* Alias word address of RTCEN bit */ -#define BDCR_OFFSET (RCC_OFFSET + 0x20) -#define RTCEN_BitNumber 0x0F -#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) - -/* Alias word address of BDRST bit */ -#define BDRST_BitNumber 0x10 -#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of LSION bit */ -#define CSR_OFFSET (RCC_OFFSET + 0x24) -#define LSION_BitNumber 0x00 -#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) - -/* ---------------------- RCC registers bit mask ------------------------ */ -/* CR register bit mask */ -#define CR_HSEBYP_Reset ((u32)0xFFFBFFFF) -#define CR_HSEBYP_Set ((u32)0x00040000) -#define CR_HSEON_Reset ((u32)0xFFFEFFFF) -#define CR_HSEON_Set ((u32)0x00010000) -#define CR_HSITRIM_Mask ((u32)0xFFFFFF07) - -/* CFGR register bit mask */ -#define CFGR_PLL_Mask ((u32)0xFFC0FFFF) -#define CFGR_PLLMull_Mask ((u32)0x003C0000) -#define CFGR_PLLSRC_Mask ((u32)0x00010000) -#define CFGR_PLLXTPRE_Mask ((u32)0x00020000) -#define CFGR_SWS_Mask ((u32)0x0000000C) -#define CFGR_SW_Mask ((u32)0xFFFFFFFC) -#define CFGR_HPRE_Reset_Mask ((u32)0xFFFFFF0F) -#define CFGR_HPRE_Set_Mask ((u32)0x000000F0) -#define CFGR_PPRE1_Reset_Mask ((u32)0xFFFFF8FF) -#define CFGR_PPRE1_Set_Mask ((u32)0x00000700) -#define CFGR_PPRE2_Reset_Mask ((u32)0xFFFFC7FF) -#define CFGR_PPRE2_Set_Mask ((u32)0x00003800) -#define CFGR_ADCPRE_Reset_Mask ((u32)0xFFFF3FFF) -#define CFGR_ADCPRE_Set_Mask ((u32)0x0000C000) - -/* CSR register bit mask */ -#define CSR_RMVF_Set ((u32)0x01000000) - -/* RCC Flag Mask */ -#define FLAG_Mask ((u8)0x1F) - -/* Typical Value of the HSI in Hz */ -#define HSI_Value ((u32)8000000) - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define CIR_BYTE2_ADDRESS ((u32)0x40021009) -/* CIR register byte 3 (Bits[23:16]) base address */ -#define CIR_BYTE3_ADDRESS ((u32)0x4002100A) - -/* CFGR register byte 4 (Bits[31:24]) base address */ -#define CFGR_BYTE4_ADDRESS ((u32)0x40021007) - -/* BDCR register base address */ -#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) - -#ifndef HSEStartUp_TimeOut -/* Time out for HSE start up */ -#define HSEStartUp_TimeOut ((u16)0x0500) -#endif - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -static uc8 APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; -static uc8 ADCPrescTable[4] = {2, 4, 6, 8}; - -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : RCC_DeInit -* Description : Resets the RCC clock configuration to the default reset state. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_DeInit(void) -{ - /* Set HSION bit */ - RCC->CR |= (u32)0x00000001; - - /* Reset SW[1:0], HPRE[3:0], PPRE1[2:0], PPRE2[2:0], ADCPRE[1:0] and MCO[2:0] bits */ - RCC->CFGR &= (u32)0xF8FF0000; - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (u32)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (u32)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL[3:0] and USBPRE bits */ - RCC->CFGR &= (u32)0xFF80FFFF; - - /* Disable all interrupts */ - RCC->CIR = 0x00000000; -} - -/******************************************************************************* -* Function Name : RCC_HSEConfig -* Description : Configures the External High Speed oscillator (HSE). -* HSE can not be stopped if it is used directly or through the -* PLL as system clock. -* Input : - RCC_HSE: specifies the new state of the HSE. -* This parameter can be one of the following values: -* - RCC_HSE_OFF: HSE oscillator OFF -* - RCC_HSE_ON: HSE oscillator ON -* - RCC_HSE_Bypass: HSE oscillator bypassed with external -* clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_HSEConfig(u32 RCC_HSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_HSE)); - - /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ - /* Reset HSEON bit */ - RCC->CR &= CR_HSEON_Reset; - - /* Reset HSEBYP bit */ - RCC->CR &= CR_HSEBYP_Reset; - - /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ - switch(RCC_HSE) - { - case RCC_HSE_ON: - /* Set HSEON bit */ - RCC->CR |= CR_HSEON_Set; - break; - - case RCC_HSE_Bypass: - /* Set HSEBYP and HSEON bits */ - RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : RCC_WaitForHSEStartUp -* Description : Waits for HSE start-up. -* Input : None -* Output : None -* Return : An ErrorStatus enumuration value: -* - SUCCESS: HSE oscillator is stable and ready to use -* - ERROR: HSE oscillator not yet ready -*******************************************************************************/ -ErrorStatus RCC_WaitForHSEStartUp(void) -{ - vu32 StartUpCounter = 0; - ErrorStatus status = ERROR; - FlagStatus HSEStatus = RESET; - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); - StartUpCounter++; - } while((HSEStatus == RESET) && (StartUpCounter != HSEStartUp_TimeOut)); - - - if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - - return (status); -} - -/******************************************************************************* -* Function Name : RCC_AdjustHSICalibrationValue -* Description : Adjusts the Internal High Speed oscillator (HSI) calibration -* value. -* Input : - HSICalibrationValue: specifies the calibration trimming value. -* This parameter must be a number between 0 and 0x1F. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_AdjustHSICalibrationValue(u8 HSICalibrationValue) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); - - tmpreg = RCC->CR; - - /* Clear HSITRIM[4:0] bits */ - tmpreg &= CR_HSITRIM_Mask; - - /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ - tmpreg |= (u32)HSICalibrationValue << 3; - - /* Store the new value */ - RCC->CR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_HSICmd -* Description : Enables or disables the Internal High Speed oscillator (HSI). -* HSI can not be stopped if it is used directly or through the -* PLL as system clock. -* Input : - NewState: new state of the HSI. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_HSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_HSION_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_PLLConfig -* Description : Configures the PLL clock source and multiplication factor. -* This function must be used only when the PLL is disabled. -* Input : - RCC_PLLSource: specifies the PLL entry clock source. -* This parameter can be one of the following values: -* - RCC_PLLSource_HSI_Div2: HSI oscillator clock divided -* by 2 selected as PLL clock entry -* - RCC_PLLSource_HSE_Div1: HSE oscillator clock selected -* as PLL clock entry -* - RCC_PLLSource_HSE_Div2: HSE oscillator clock divided -* by 2 selected as PLL clock entry -* - RCC_PLLMul: specifies the PLL multiplication factor. -* This parameter can be RCC_PLLMul_x where x:[2,16] -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PLLConfig(u32 RCC_PLLSource, u32 RCC_PLLMul) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); - assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); - - tmpreg = RCC->CFGR; - - /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ - tmpreg &= CFGR_PLL_Mask; - - /* Set the PLL configuration bits */ - tmpreg |= RCC_PLLSource | RCC_PLLMul; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_PLLCmd -* Description : Enables or disables the PLL. -* The PLL can not be disabled if it is used as system clock. -* Input : - NewState: new state of the PLL. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PLLCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_PLLON_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_SYSCLKConfig -* Description : Configures the system clock (SYSCLK). -* Input : - RCC_SYSCLKSource: specifies the clock source used as system -* clock. This parameter can be one of the following values: -* - RCC_SYSCLKSource_HSI: HSI selected as system clock -* - RCC_SYSCLKSource_HSE: HSE selected as system clock -* - RCC_SYSCLKSource_PLLCLK: PLL selected as system clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_SYSCLKConfig(u32 RCC_SYSCLKSource) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); - - tmpreg = RCC->CFGR; - - /* Clear SW[1:0] bits */ - tmpreg &= CFGR_SW_Mask; - - /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ - tmpreg |= RCC_SYSCLKSource; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_GetSYSCLKSource -* Description : Returns the clock source used as system clock. -* Input : None -* Output : None -* Return : The clock source used as system clock. The returned value can -* be one of the following: -* - 0x00: HSI used as system clock -* - 0x04: HSE used as system clock -* - 0x08: PLL used as system clock -*******************************************************************************/ -u8 RCC_GetSYSCLKSource(void) -{ - return ((u8)(RCC->CFGR & CFGR_SWS_Mask)); -} - -/******************************************************************************* -* Function Name : RCC_HCLKConfig -* Description : Configures the AHB clock (HCLK). -* Input : - RCC_SYSCLK: defines the AHB clock divider. This clock is -* derived from the system clock (SYSCLK). -* This parameter can be one of the following values: -* - RCC_SYSCLK_Div1: AHB clock = SYSCLK -* - RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 -* - RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 -* - RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 -* - RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 -* - RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 -* - RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 -* - RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 -* - RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_HCLKConfig(u32 RCC_SYSCLK) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_HCLK(RCC_SYSCLK)); - - tmpreg = RCC->CFGR; - - /* Clear HPRE[3:0] bits */ - tmpreg &= CFGR_HPRE_Reset_Mask; - - /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ - tmpreg |= RCC_SYSCLK; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_PCLK1Config -* Description : Configures the Low Speed APB clock (PCLK1). -* Input : - RCC_HCLK: defines the APB1 clock divider. This clock is -* derived from the AHB clock (HCLK). -* This parameter can be one of the following values: -* - RCC_HCLK_Div1: APB1 clock = HCLK -* - RCC_HCLK_Div2: APB1 clock = HCLK/2 -* - RCC_HCLK_Div4: APB1 clock = HCLK/4 -* - RCC_HCLK_Div8: APB1 clock = HCLK/8 -* - RCC_HCLK_Div16: APB1 clock = HCLK/16 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PCLK1Config(u32 RCC_HCLK) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - - tmpreg = RCC->CFGR; - - /* Clear PPRE1[2:0] bits */ - tmpreg &= CFGR_PPRE1_Reset_Mask; - - /* Set PPRE1[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_PCLK2Config -* Description : Configures the High Speed APB clock (PCLK2). -* Input : - RCC_HCLK: defines the APB2 clock divider. This clock is -* derived from the AHB clock (HCLK). -* This parameter can be one of the following values: -* - RCC_HCLK_Div1: APB2 clock = HCLK -* - RCC_HCLK_Div2: APB2 clock = HCLK/2 -* - RCC_HCLK_Div4: APB2 clock = HCLK/4 -* - RCC_HCLK_Div8: APB2 clock = HCLK/8 -* - RCC_HCLK_Div16: APB2 clock = HCLK/16 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_PCLK2Config(u32 RCC_HCLK) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - - tmpreg = RCC->CFGR; - - /* Clear PPRE2[2:0] bits */ - tmpreg &= CFGR_PPRE2_Reset_Mask; - - /* Set PPRE2[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK << 3; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_ITConfig -* Description : Enables or disables the specified RCC interrupts. -* Input : - RCC_IT: specifies the RCC interrupt sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - RCC_IT_LSIRDY: LSI ready interrupt -* - RCC_IT_LSERDY: LSE ready interrupt -* - RCC_IT_HSIRDY: HSI ready interrupt -* - RCC_IT_HSERDY: HSE ready interrupt -* - RCC_IT_PLLRDY: PLL ready interrupt -* - NewState: new state of the specified RCC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ITConfig(u8 RCC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_IT(RCC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Perform Byte access to RCC_CIR[12:8] bits to enable the selected interrupts */ - *(vu8 *) CIR_BYTE2_ADDRESS |= RCC_IT; - } - else - { - /* Perform Byte access to RCC_CIR[12:8] bits to disable the selected interrupts */ - *(vu8 *) CIR_BYTE2_ADDRESS &= (u8)~RCC_IT; - } -} - -/******************************************************************************* -* Function Name : RCC_USBCLKConfig -* Description : Configures the USB clock (USBCLK). -* Input : - RCC_USBCLKSource: specifies the USB clock source. This clock -* is derived from the PLL output. -* This parameter can be one of the following values: -* - RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 -* selected as USB clock source -* - RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB -* clock source -* Output : None -* Return : None -*******************************************************************************/ -void RCC_USBCLKConfig(u32 RCC_USBCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); - - *(vu32 *) CFGR_USBPRE_BB = RCC_USBCLKSource; -} - -/******************************************************************************* -* Function Name : RCC_ADCCLKConfig -* Description : Configures the ADC clock (ADCCLK). -* Input : - RCC_PCLK2: defines the ADC clock divider. This clock is -* derived from the APB2 clock (PCLK2). -* This parameter can be one of the following values: -* - RCC_PCLK2_Div2: ADC clock = PCLK2/2 -* - RCC_PCLK2_Div4: ADC clock = PCLK2/4 -* - RCC_PCLK2_Div6: ADC clock = PCLK2/6 -* - RCC_PCLK2_Div8: ADC clock = PCLK2/8 -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ADCCLKConfig(u32 RCC_PCLK2) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); - - tmpreg = RCC->CFGR; - - /* Clear ADCPRE[1:0] bits */ - tmpreg &= CFGR_ADCPRE_Reset_Mask; - - /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ - tmpreg |= RCC_PCLK2; - - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : RCC_LSEConfig -* Description : Configures the External Low Speed oscillator (LSE). -* Input : - RCC_LSE: specifies the new state of the LSE. -* This parameter can be one of the following values: -* - RCC_LSE_OFF: LSE oscillator OFF -* - RCC_LSE_ON: LSE oscillator ON -* - RCC_LSE_Bypass: LSE oscillator bypassed with external -* clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_LSEConfig(u8 RCC_LSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_LSE)); - - /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ - /* Reset LSEON bit */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_OFF; - - /* Reset LSEBYP bit */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_OFF; - - /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ - switch(RCC_LSE) - { - case RCC_LSE_ON: - /* Set LSEON bit */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_ON; - break; - - case RCC_LSE_Bypass: - /* Set LSEBYP and LSEON bits */ - *(vu8 *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : RCC_LSICmd -* Description : Enables or disables the Internal Low Speed oscillator (LSI). -* LSI can not be disabled if the IWDG is running. -* Input : - NewState: new state of the LSI. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_LSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CSR_LSION_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_RTCCLKConfig -* Description : Configures the RTC clock (RTCCLK). -* Once the RTC clock is selected it can’t be changed unless the -* Backup domain is reset. -* Input : - RCC_RTCCLKSource: specifies the RTC clock source. -* This parameter can be one of the following values: -* - RCC_RTCCLKSource_LSE: LSE selected as RTC clock -* - RCC_RTCCLKSource_LSI: LSI selected as RTC clock -* - RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 -* selected as RTC clock -* Output : None -* Return : None -*******************************************************************************/ -void RCC_RTCCLKConfig(u32 RCC_RTCCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); - - /* Select the RTC clock source */ - RCC->BDCR |= RCC_RTCCLKSource; -} - -/******************************************************************************* -* Function Name : RCC_RTCCLKCmd -* Description : Enables or disables the RTC clock. -* This function must be used only after the RTC clock was -* selected using the RCC_RTCCLKConfig function. -* Input : - NewState: new state of the RTC clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_RTCCLKCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) BDCR_RTCEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_GetClocksFreq -* Description : Returns the frequencies of different on chip clocks. -* Input : - RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which -* will hold the clocks frequencies. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) -{ - u32 tmp = 0, pllmull = 0, pllsource = 0, presc = 0; - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & CFGR_SWS_Mask; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSI_Value; - break; - - case 0x04: /* HSE used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSE_Value; - break; - - case 0x08: /* PLL used as system clock */ - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & CFGR_PLLMull_Mask; - pllmull = ( pllmull >> 18) + 2; - - pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; - - if (pllsource == 0x00) - {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSI_Value >> 1) * pllmull; - } - else - {/* HSE selected as PLL clock entry */ - - if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (u32)RESET) - {/* HSE oscillator clock divided by 2 */ - - RCC_Clocks->SYSCLK_Frequency = (HSE_Value >> 1) * pllmull; - } - else - { - RCC_Clocks->SYSCLK_Frequency = HSE_Value * pllmull; - } - } - break; - - default: - RCC_Clocks->SYSCLK_Frequency = HSI_Value; - break; - } - - /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ - /* Get HCLK prescaler */ - tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; - tmp = tmp >> 4; - presc = APBAHBPrescTable[tmp]; - - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; - - /* Get PCLK1 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; - tmp = tmp >> 8; - presc = APBAHBPrescTable[tmp]; - - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - - /* Get PCLK2 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; - tmp = tmp >> 11; - presc = APBAHBPrescTable[tmp]; - - /* PCLK2 clock frequency */ - RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - - /* Get ADCCLK prescaler */ - tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; - tmp = tmp >> 14; - presc = ADCPrescTable[tmp]; - - /* ADCCLK clock frequency */ - RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; -} - -/******************************************************************************* -* Function Name : RCC_AHBPeriphClockCmd -* Description : Enables or disables the AHB peripheral clock. -* Input : - RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. -* This parameter can be any combination of the following values: -* - RCC_AHBPeriph_DMA1 -* - RCC_AHBPeriph_DMA2 -* - RCC_AHBPeriph_SRAM -* - RCC_AHBPeriph_FLITF -* - RCC_AHBPeriph_CRC -* - RCC_AHBPeriph_FSMC -* - RCC_AHBPeriph_SDIO -* SRAM and FLITF clock can be disabled only during sleep mode. -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_AHBPeriphClockCmd(u32 RCC_AHBPeriph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHBENR |= RCC_AHBPeriph; - } - else - { - RCC->AHBENR &= ~RCC_AHBPeriph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB2PeriphClockCmd -* Description : Enables or disables the High Speed APB (APB2) peripheral clock. -* Input : - RCC_APB2Periph: specifies the APB2 peripheral to gates its -* clock. -* This parameter can be any combination of the following values: -* - RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, -* RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, -* RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, -* RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, -* RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, -* RCC_APB2Periph_ALL -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB2PeriphClockCmd(u32 RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB2ENR |= RCC_APB2Periph; - } - else - { - RCC->APB2ENR &= ~RCC_APB2Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB1PeriphClockCmd -* Description : Enables or disables the Low Speed APB (APB1) peripheral clock. -* Input : - RCC_APB1Periph: specifies the APB1 peripheral to gates its -* clock. -* This parameter can be any combination of the following values: -* - RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, -* RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, -* RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, -* RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, -* RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, -* RCC_APB1Periph_USB, RCC_APB1Periph_CAN, RCC_APB1Periph_BKP, -* RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB1PeriphClockCmd(u32 RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB1ENR |= RCC_APB1Periph; - } - else - { - RCC->APB1ENR &= ~RCC_APB1Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB2PeriphResetCmd -* Description : Forces or releases High Speed APB (APB2) peripheral reset. -* Input : - RCC_APB2Periph: specifies the APB2 peripheral to reset. -* This parameter can be any combination of the following values: -* - RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, -* RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, -* RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, -* RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, -* RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3, -* RCC_APB2Periph_ALL -* - NewState: new state of the specified peripheral reset. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB2PeriphResetCmd(u32 RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB2RSTR |= RCC_APB2Periph; - } - else - { - RCC->APB2RSTR &= ~RCC_APB2Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_APB1PeriphResetCmd -* Description : Forces or releases Low Speed APB (APB1) peripheral reset. -* Input : - RCC_APB1Periph: specifies the APB1 peripheral to reset. -* This parameter can be any combination of the following values: -* - RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, -* RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, -* RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, -* RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, -* RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, -* RCC_APB1Periph_USB, RCC_APB1Periph_CAN, RCC_APB1Periph_BKP, -* RCC_APB1Periph_PWR, RCC_APB1Periph_DAC, RCC_APB1Periph_ALL -* - NewState: new state of the specified peripheral clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_APB1PeriphResetCmd(u32 RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->APB1RSTR |= RCC_APB1Periph; - } - else - { - RCC->APB1RSTR &= ~RCC_APB1Periph; - } -} - -/******************************************************************************* -* Function Name : RCC_BackupResetCmd -* Description : Forces or releases the Backup domain reset. -* Input : - NewState: new state of the Backup domain reset. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_BackupResetCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) BDCR_BDRST_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_ClockSecuritySystemCmd -* Description : Enables or disables the Clock Security System. -* Input : - NewState: new state of the Clock Security System.. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ClockSecuritySystemCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CR_CSSON_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : RCC_MCOConfig -* Description : Selects the clock source to output on MCO pin. -* Input : - RCC_MCO: specifies the clock source to output. -* This parameter can be one of the following values: -* - RCC_MCO_NoClock: No clock selected -* - RCC_MCO_SYSCLK: System clock selected -* - RCC_MCO_HSI: HSI oscillator clock selected -* - RCC_MCO_HSE: HSE oscillator clock selected -* - RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected -* Output : None -* Return : None -*******************************************************************************/ -void RCC_MCOConfig(u8 RCC_MCO) -{ - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCO)); - - /* Perform Byte access to MCO[2:0] bits to select the MCO source */ - *(vu8 *) CFGR_BYTE4_ADDRESS = RCC_MCO; -} - -/******************************************************************************* -* Function Name : RCC_GetFlagStatus -* Description : Checks whether the specified RCC flag is set or not. -* Input : - RCC_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - RCC_FLAG_HSIRDY: HSI oscillator clock ready -* - RCC_FLAG_HSERDY: HSE oscillator clock ready -* - RCC_FLAG_PLLRDY: PLL clock ready -* - RCC_FLAG_LSERDY: LSE oscillator clock ready -* - RCC_FLAG_LSIRDY: LSI oscillator clock ready -* - RCC_FLAG_PINRST: Pin reset -* - RCC_FLAG_PORRST: POR/PDR reset -* - RCC_FLAG_SFTRST: Software reset -* - RCC_FLAG_IWDGRST: Independent Watchdog reset -* - RCC_FLAG_WWDGRST: Window Watchdog reset -* - RCC_FLAG_LPWRRST: Low Power reset -* Output : None -* Return : The new state of RCC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus RCC_GetFlagStatus(u8 RCC_FLAG) -{ - u32 tmp = 0; - u32 statusreg = 0; - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_FLAG(RCC_FLAG)); - - /* Get the RCC register index */ - tmp = RCC_FLAG >> 5; - - if (tmp == 1) /* The flag to check is in CR register */ - { - statusreg = RCC->CR; - } - else if (tmp == 2) /* The flag to check is in BDCR register */ - { - statusreg = RCC->BDCR; - } - else /* The flag to check is in CSR register */ - { - statusreg = RCC->CSR; - } - - /* Get the flag position */ - tmp = RCC_FLAG & FLAG_Mask; - - if ((statusreg & ((u32)1 << tmp)) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : RCC_ClearFlag -* Description : Clears the RCC reset flags. -* The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, -* RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, -* RCC_FLAG_LPWRRST -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ClearFlag(void) -{ - /* Set RMVF bit to clear the reset flags */ - RCC->CSR |= CSR_RMVF_Set; -} - -/******************************************************************************* -* Function Name : RCC_GetITStatus -* Description : Checks whether the specified RCC interrupt has occurred or not. -* Input : - RCC_IT: specifies the RCC interrupt source to check. -* This parameter can be one of the following values: -* - RCC_IT_LSIRDY: LSI ready interrupt -* - RCC_IT_LSERDY: LSE ready interrupt -* - RCC_IT_HSIRDY: HSI ready interrupt -* - RCC_IT_HSERDY: HSE ready interrupt -* - RCC_IT_PLLRDY: PLL ready interrupt -* - RCC_IT_CSS: Clock Security System interrupt -* Output : None -* Return : The new state of RCC_IT (SET or RESET). -*******************************************************************************/ -ITStatus RCC_GetITStatus(u8 RCC_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RCC_GET_IT(RCC_IT)); - - /* Check the status of the specified RCC interrupt */ - if ((RCC->CIR & RCC_IT) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the RCC_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : RCC_ClearITPendingBit -* Description : Clears the RCC’s interrupt pending bits. -* Input : - RCC_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - RCC_IT_LSIRDY: LSI ready interrupt -* - RCC_IT_LSERDY: LSE ready interrupt -* - RCC_IT_HSIRDY: HSI ready interrupt -* - RCC_IT_HSERDY: HSE ready interrupt -* - RCC_IT_PLLRDY: PLL ready interrupt -* - RCC_IT_CSS: Clock Security System interrupt -* Output : None -* Return : None -*******************************************************************************/ -void RCC_ClearITPendingBit(u8 RCC_IT) -{ - /* Check the parameters */ - assert_param(IS_RCC_CLEAR_IT(RCC_IT)); - - /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt - pending bits */ - *(vu8 *) CIR_BYTE3_ADDRESS = RCC_IT; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_rtc.c b/bsp/stm32/library/src/stm32f10x_rtc.c deleted file mode 100644 index 2284933ca..000000000 --- a/bsp/stm32/library/src/stm32f10x_rtc.c +++ /dev/null @@ -1,320 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_rtc.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the RTC firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rtc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define CRL_CNF_Set ((u16)0x0010) /* Configuration Flag Enable Mask */ -#define CRL_CNF_Reset ((u16)0xFFEF) /* Configuration Flag Disable Mask */ -#define RTC_LSB_Mask ((u32)0x0000FFFF) /* RTC LSB Mask */ -#define PRLH_MSB_Mask ((u32)0x000F0000) /* RTC Prescaler MSB Mask */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : RTC_ITConfig -* Description : Enables or disables the specified RTC interrupts. -* Input : - RTC_IT: specifies the RTC interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - RTC_IT_OW: Overflow interrupt -* - RTC_IT_ALR: Alarm interrupt -* - RTC_IT_SEC: Second interrupt -* - NewState: new state of the specified RTC interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ITConfig(u16 RTC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RTC->CRH |= RTC_IT; - } - else - { - RTC->CRH &= (u16)~RTC_IT; - } -} - -/******************************************************************************* -* Function Name : RTC_EnterConfigMode -* Description : Enters the RTC configuration mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_EnterConfigMode(void) -{ - /* Set the CNF flag to enter in the Configuration Mode */ - RTC->CRL |= CRL_CNF_Set; -} - -/******************************************************************************* -* Function Name : RTC_ExitConfigMode -* Description : Exits from the RTC configuration mode. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ExitConfigMode(void) -{ - /* Reset the CNF flag to exit from the Configuration Mode */ - RTC->CRL &= CRL_CNF_Reset; -} - -/******************************************************************************* -* Function Name : RTC_GetCounter -* Description : Gets the RTC counter value. -* Input : None -* Output : None -* Return : RTC counter value. -*******************************************************************************/ -u32 RTC_GetCounter(void) -{ - u16 tmp = 0; - tmp = RTC->CNTL; - - return (((u32)RTC->CNTH << 16 ) | tmp) ; -} - -/******************************************************************************* -* Function Name : RTC_SetCounter -* Description : Sets the RTC counter value. -* Input : - CounterValue: RTC counter new value. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_SetCounter(u32 CounterValue) -{ - RTC_EnterConfigMode(); - - /* Set RTC COUNTER MSB word */ - RTC->CNTH = CounterValue >> 16; - /* Set RTC COUNTER LSB word */ - RTC->CNTL = (CounterValue & RTC_LSB_Mask); - - RTC_ExitConfigMode(); -} - -/******************************************************************************* -* Function Name : RTC_SetPrescaler -* Description : Sets the RTC prescaler value. -* Input : - PrescalerValue: RTC prescaler new value. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_SetPrescaler(u32 PrescalerValue) -{ - /* Check the parameters */ - assert_param(IS_RTC_PRESCALER(PrescalerValue)); - - RTC_EnterConfigMode(); - - /* Set RTC PRESCALER MSB word */ - RTC->PRLH = (PrescalerValue & PRLH_MSB_Mask) >> 16; - /* Set RTC PRESCALER LSB word */ - RTC->PRLL = (PrescalerValue & RTC_LSB_Mask); - - RTC_ExitConfigMode(); -} - -/******************************************************************************* -* Function Name : RTC_SetAlarm -* Description : Sets the RTC alarm value. -* Input : - AlarmValue: RTC alarm new value. -* Output : None -* Return : None -*******************************************************************************/ -void RTC_SetAlarm(u32 AlarmValue) -{ - RTC_EnterConfigMode(); - - /* Set the ALARM MSB word */ - RTC->ALRH = AlarmValue >> 16; - /* Set the ALARM LSB word */ - RTC->ALRL = (AlarmValue & RTC_LSB_Mask); - - RTC_ExitConfigMode(); -} - -/******************************************************************************* -* Function Name : RTC_GetDivider -* Description : Gets the RTC divider value. -* Input : None -* Output : None -* Return : RTC Divider value. -*******************************************************************************/ -u32 RTC_GetDivider(void) -{ - u32 tmp = 0x00; - - tmp = ((u32)RTC->DIVH & (u32)0x000F) << 16; - tmp |= RTC->DIVL; - - return tmp; -} - -/******************************************************************************* -* Function Name : RTC_WaitForLastTask -* Description : Waits until last write operation on RTC registers has finished. -* This function must be called before any write to RTC registers. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_WaitForLastTask(void) -{ - /* Loop until RTOFF flag is set */ - while ((RTC->CRL & RTC_FLAG_RTOFF) == (u16)RESET) - { - } -} - -/******************************************************************************* -* Function Name : RTC_WaitForSynchro -* Description : Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) -* are synchronized with RTC APB clock. -* This function must be called before any read operation after -* an APB reset or an APB clock stop. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_WaitForSynchro(void) -{ - /* Clear RSF flag */ - RTC->CRL &= (u16)~RTC_FLAG_RSF; - - /* Loop until RSF flag is set */ - while ((RTC->CRL & RTC_FLAG_RSF) == (u16)RESET) - { - } -} - -/******************************************************************************* -* Function Name : RTC_GetFlagStatus -* Description : Checks whether the specified RTC flag is set or not. -* Input : - RTC_FLAG: specifies the flag to check. -* This parameter can be one the following values: -* - RTC_FLAG_RTOFF: RTC Operation OFF flag -* - RTC_FLAG_RSF: Registers Synchronized flag -* - RTC_FLAG_OW: Overflow flag -* - RTC_FLAG_ALR: Alarm flag -* - RTC_FLAG_SEC: Second flag -* Output : None -* Return : The new state of RTC_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus RTC_GetFlagStatus(u16 RTC_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); - - if ((RTC->CRL & RTC_FLAG) != (u16)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : RTC_ClearFlag -* Description : Clears the RTC’s pending flags. -* Input : - RTC_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - RTC_FLAG_RSF: Registers Synchronized flag. This flag -* is cleared only after an APB reset or an APB Clock stop. -* - RTC_FLAG_OW: Overflow flag -* - RTC_FLAG_ALR: Alarm flag -* - RTC_FLAG_SEC: Second flag -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ClearFlag(u16 RTC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); - - /* Clear the coressponding RTC flag */ - RTC->CRL &= (u16)~RTC_FLAG; -} - -/******************************************************************************* -* Function Name : RTC_GetITStatus -* Description : Checks whether the specified RTC interrupt has occured or not. -* Input : - RTC_IT: specifies the RTC interrupts sources to check. -* This parameter can be one of the following values: -* - RTC_IT_OW: Overflow interrupt -* - RTC_IT_ALR: Alarm interrupt -* - RTC_IT_SEC: Second interrupt -* Output : None -* Return : The new state of the RTC_IT (SET or RESET). -*******************************************************************************/ -ITStatus RTC_GetITStatus(u16 RTC_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RTC_GET_IT(RTC_IT)); - - bitstatus = (ITStatus)(RTC->CRL & RTC_IT); - - if (((RTC->CRH & RTC_IT) != (u16)RESET) && (bitstatus != (u16)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : RTC_ClearITPendingBit -* Description : Clears the RTC’s interrupt pending bits. -* Input : - RTC_IT: specifies the interrupt pending bit to clear. -* This parameter can be any combination of the following values: -* - RTC_IT_OW: Overflow interrupt -* - RTC_IT_ALR: Alarm interrupt -* - RTC_IT_SEC: Second interrupt -* Output : None -* Return : None -*******************************************************************************/ -void RTC_ClearITPendingBit(u16 RTC_IT) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - - /* Clear the coressponding RTC pending bit */ - RTC->CRL &= (u16)~RTC_IT; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_sdio.c b/bsp/stm32/library/src/stm32f10x_sdio.c deleted file mode 100644 index 42d4e05f9..000000000 --- a/bsp/stm32/library/src/stm32f10x_sdio.c +++ /dev/null @@ -1,832 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_sdio.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the SDIO firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_sdio.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* ------------ SDIO registers bit address in the alias region ----------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) -#define CLKEN_BitNumber 0x08 -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) - -/* --- CMD Register ---*/ -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0C) -#define SDIOSUSPEND_BitNumber 0x0B -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BitNumber 0x0C -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) - -/* Alias word address of NIEN bit */ -#define NIEN_BitNumber 0x0D -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BitNumber 0x0E -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) - -/* --- DCTRL Register ---*/ -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) -#define DMAEN_BitNumber 0x03 -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BitNumber 0x08 -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BitNumber 0x09 -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BitNumber 0x0A -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BitNumber 0x0B -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) - - -/* ---------------------- SDIO registers bit mask ------------------------ */ -/* --- CLKCR Register ---*/ -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((u32)0xFFFF8100) - -/* --- PWRCTRL Register ---*/ -/* SDIO PWRCTRL Mask */ -#define PWR_PWRCTRL_MASK ((u32)0xFFFFFFFC) - -/* --- DCTRL Register ---*/ -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((u32)0xFFFFFF08) - -/* --- CMD Register ---*/ -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((u32)0xFFFFF800) - -/* SDIO RESP Registers Address */ -#define SDIO_RESP_ADDR ((u32)(SDIO_BASE + 0x14)) - -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SDIO_DeInit -* Description : Deinitializes the SDIO peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DeInit(void) -{ - SDIO->POWER = 0x00000000; - SDIO->CLKCR = 0x00000000; - SDIO->ARG = 0x00000000; - SDIO->CMD = 0x00000000; - SDIO->DTIMER = 0x00000000; - SDIO->DLEN = 0x00000000; - SDIO->DCTRL = 0x00000000; - SDIO->ICR = 0x00C007FF; - SDIO->MASK = 0x00000000; -} - -/******************************************************************************* -* Function Name : SDIO_Init -* Description : Initializes the SDIO peripheral according to the specified -* parameters in the SDIO_InitStruct. -* Input : SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure -* that contains the configuration information for the SDIO -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); - assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); - assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); - assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); - assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); - -/*---------------------------- SDIO CLKCR Configuration ------------------------*/ - /* Get the SDIO CLKCR value */ - tmpreg = SDIO->CLKCR; - - /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ - tmpreg &= CLKCR_CLEAR_MASK; - - /* Set CLKDIV bits according to SDIO_ClockDiv value */ - /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ - /* Set BYPASS bit according to SDIO_ClockBypass value */ - /* Set WIDBUS bits according to SDIO_BusWide value */ - /* Set NEGEDGE bits according to SDIO_ClockEdge value */ - /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ - tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | - SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | - SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); - - /* Write to SDIO CLKCR */ - SDIO->CLKCR = tmpreg; -} - -/******************************************************************************* -* Function Name : SDIO_StructInit -* Description : Fills each SDIO_InitStruct member with its default value. -* Input : SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which -* will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) -{ - /* SDIO_InitStruct members default value */ - SDIO_InitStruct->SDIO_ClockDiv = 0x00; - SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; -} - -/******************************************************************************* -* Function Name : SDIO_ClockCmd -* Description : Enables or disables the SDIO Clock. -* Input : NewState: new state of the SDIO Clock. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ClockCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CLKCR_CLKEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SetPowerState -* Description : Sets the power status of the controller. -* Input : SDIO_PowerState: new state of the Power state. -* This parameter can be one of the following values: -* - SDIO_PowerState_OFF -* - SDIO_PowerState_ON -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SetPowerState(u32 SDIO_PowerState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); - - SDIO->POWER &= PWR_PWRCTRL_MASK; - SDIO->POWER |= SDIO_PowerState; -} - -/******************************************************************************* -* Function Name : SDIO_GetPowerState -* Description : Gets the power status of the controller. -* Input : None -* Output : None -* Return : Power status of the controller. The returned value can -* be one of the following: -* - 0x00: Power OFF -* - 0x02: Power UP -* - 0x03: Power ON -*******************************************************************************/ -u32 SDIO_GetPowerState(void) -{ - return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); -} - -/******************************************************************************* -* Function Name : SDIO_ITConfig -* Description : Enables or disables the SDIO interrupts. -* Input : - SDIO_IT: specifies the SDIO interrupt sources to be -* enabled or disabled. -* This parameter can be one or a combination of the following -* values: -* - SDIO_IT_CCRCFAIL: Command response received (CRC check -* failed) interrupt -* - SDIO_IT_DCRCFAIL: Data block sent/received (CRC check -* failed) interrupt -* - SDIO_IT_CTIMEOUT: Command response timeout interrupt -* - SDIO_IT_DTIMEOUT: Data timeout interrupt -* - SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt -* - SDIO_IT_RXOVERR: Received FIFO overrun error interrupt -* - SDIO_IT_CMDREND: Command response received (CRC check -* passed) interrupt -* - SDIO_IT_CMDSENT: Command sent (no response required) -* interrupt -* - SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) interrupt -* - SDIO_IT_STBITERR: Start bit not detected on all data -* signals in wide bus mode interrupt -* - SDIO_IT_DBCKEND: Data block sent/received (CRC check -* passed) interrupt -* - SDIO_IT_CMDACT: Command transfer in progress interrupt -* - SDIO_IT_TXACT: Data transmit in progress interrupt -* - SDIO_IT_RXACT: Data receive in progress interrupt -* - SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt -* - SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt -* - SDIO_IT_TXFIFOF: Transmit FIFO full interrupt -* - SDIO_IT_RXFIFOF: Receive FIFO full interrupt -* - SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt -* - SDIO_IT_RXFIFOE: Receive FIFO empty interrupt -* - SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt -* - SDIO_IT_RXDAVL: Data available in receive FIFO interrupt -* - SDIO_IT_SDIOIT: SD I/O interrupt received interrupt -* - SDIO_IT_CEATAEND: CE-ATA command completion signal -* received for CMD61 interrupt -* - NewState: new state of the specified SDIO interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ITConfig(u32 SDIO_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_IT(SDIO_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the SDIO interrupts */ - SDIO->MASK |= SDIO_IT; - } - else - { - /* Disable the SDIO interrupts */ - SDIO->MASK &= ~SDIO_IT; - } -} - -/******************************************************************************* -* Function Name : SDIO_DMACmd -* Description : Enables or disables the SDIO DMA request. -* Input : NewState: new state of the selected SDIO DMA request. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DMACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_DMAEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SendCommand -* Description : Initializes the SDIO Command according to the specified -* parameters in the SDIO_CmdInitStruct and send the command. -* Input : SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef -* structure that contains the configuration information -* for the SDIO command. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); - assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); - assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); - assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); - -/*---------------------------- SDIO ARG Configuration ------------------------*/ - /* Set the SDIO Argument value */ - SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; - -/*---------------------------- SDIO CMD Configuration ------------------------*/ - /* Get the SDIO CMD value */ - tmpreg = SDIO->CMD; - - /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ - tmpreg &= CMD_CLEAR_MASK; - /* Set CMDINDEX bits according to SDIO_CmdIndex value */ - /* Set WAITRESP bits according to SDIO_Response value */ - /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ - /* Set CPSMEN bits according to SDIO_CPSM value */ - tmpreg |= (u32)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response - | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; - - /* Write to SDIO CMD */ - SDIO->CMD = tmpreg; -} - -/******************************************************************************* -* Function Name : SDIO_CmdStructInit -* Description : Fills each SDIO_CmdInitStruct member with its default value. -* Input : SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) -{ - /* SDIO_CmdInitStruct members default value */ - SDIO_CmdInitStruct->SDIO_Argument = 0x00; - SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; - SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; - SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; -} - -/******************************************************************************* -* Function Name : SDIO_GetCommandResponse -* Description : Returns command index of last command for which response -* received. -* Input : None -* Output : None -* Return : Returns the command index of the last command response received. -*******************************************************************************/ -u8 SDIO_GetCommandResponse(void) -{ - return (u8)(SDIO->RESPCMD); -} - -/******************************************************************************* -* Function Name : SDIO_GetResponse -* Description : Returns response received from the card for the last command. -* Input : - SDIO_RESP: Specifies the SDIO response register. -* This parameter can be one of the following values: -* - SDIO_RESP1: Response Register 1 -* - SDIO_RESP2: Response Register 2 -* - SDIO_RESP3: Response Register 3 -* - SDIO_RESP4: Response Register 4 -* Output : None -* Return : The Corresponding response register value. -*******************************************************************************/ -u32 SDIO_GetResponse(u32 SDIO_RESP) -{ - /* Check the parameters */ - assert_param(IS_SDIO_RESP(SDIO_RESP)); - - return (*(vu32 *)(SDIO_RESP_ADDR + SDIO_RESP)); -} - -/******************************************************************************* -* Function Name : SDIO_DataConfig -* Description : Initializes the SDIO data path according to the specified -* parameters in the SDIO_DataInitStruct. -* Input : SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef -* structure that contains the configuration information -* for the SDIO command. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); - assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); - assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); - assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); - assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); - -/*---------------------------- SDIO DTIMER Configuration ---------------------*/ - /* Set the SDIO Data TimeOut value */ - SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; - -/*---------------------------- SDIO DLEN Configuration -----------------------*/ - /* Set the SDIO DataLength value */ - SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; - -/*---------------------------- SDIO DCTRL Configuration ----------------------*/ - /* Get the SDIO DCTRL value */ - tmpreg = SDIO->DCTRL; - - /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ - tmpreg &= DCTRL_CLEAR_MASK; - /* Set DEN bit according to SDIO_DPSM value */ - /* Set DTMODE bit according to SDIO_TransferMode value */ - /* Set DTDIR bit according to SDIO_TransferDir value */ - /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ - tmpreg |= (u32)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir - | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; - - /* Write to SDIO DCTRL */ - SDIO->DCTRL = tmpreg; -} - -/******************************************************************************* -* Function Name : SDIO_DataStructInit -* Description : Fills each SDIO_DataInitStruct member with its default value. -* Input : SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - /* SDIO_DataInitStruct members default value */ - SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; - SDIO_DataInitStruct->SDIO_DataLength = 0x00; - SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; -} - -/******************************************************************************* -* Function Name : SDIO_GetDataCounter -* Description : Returns number of remaining data bytes to be transferred. -* Input : None -* Output : None -* Return : Number of remaining data bytes to be transferred -*******************************************************************************/ -u32 SDIO_GetDataCounter(void) -{ - return SDIO->DCOUNT; -} - -/******************************************************************************* -* Function Name : SDIO_ReadData -* Description : Read one data word from Rx FIFO. -* Input : None -* Output : None -* Return : Data received -*******************************************************************************/ -u32 SDIO_ReadData(void) -{ - return SDIO->FIFO; -} - -/******************************************************************************* -* Function Name : SDIO_WriteData -* Description : Write one data word to Tx FIFO. -* Input : Data: 32-bit data word to write. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_WriteData(u32 Data) -{ - SDIO->FIFO = Data; -} - -/******************************************************************************* -* Function Name : SDIO_GetFIFOCount -* Description : Returns the number of words left to be written to or read -* from FIFO. -* Input : None -* Output : None -* Return : Remaining number of words. -*******************************************************************************/ -u32 SDIO_GetFIFOCount(void) -{ - return SDIO->FIFOCNT; -} - -/******************************************************************************* -* Function Name : SDIO_StartSDIOReadWait -* Description : Starts the SD I/O Read Wait operation. -* Input : NewState: new state of the Start SDIO Read Wait operation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_StartSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_RWSTART_BB = (u32) NewState; -} - -/******************************************************************************* -* Function Name : SDIO_StopSDIOReadWait -* Description : Stops the SD I/O Read Wait operation. -* Input : NewState: new state of the Stop SDIO Read Wait operation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_StopSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_RWSTOP_BB = (u32) NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SetSDIOReadWaitMode -* Description : Sets one of the two options of inserting read wait interval. -* Input : SDIOReadWaitMode: SD I/O Read Wait operation mode. -* This parametre can be: -* - SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK -* - SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SetSDIOReadWaitMode(u32 SDIO_ReadWaitMode) -{ - /* Check the parameters */ - assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); - - *(vu32 *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; -} - -/******************************************************************************* -* Function Name : SDIO_SetSDIOOperation -* Description : Enables or disables the SD I/O Mode Operation. -* Input : NewState: new state of SDIO specific operation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SetSDIOOperation(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) DCTRL_SDIOEN_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_SendSDIOSuspendCmd -* Description : Enables or disables the SD I/O Mode suspend command sending. -* Input : NewState: new state of the SD I/O Mode suspend command. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_SDIOSUSPEND_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_CommandCompletionCmd -* Description : Enables or disables the command completion signal. -* Input : NewState: new state of command completion signal. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_CommandCompletionCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_ENCMDCOMPL_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_CEATAITCmd -* Description : Enables or disables the CE-ATA interrupt. -* Input : NewState: new state of CE-ATA interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_CEATAITCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_NIEN_BB = (u32)((~((u32)NewState)) & ((u32)0x1)); -} - -/******************************************************************************* -* Function Name : SDIO_SendCEATACmd -* Description : Sends CE-ATA command (CMD61). -* Input : NewState: new state of CE-ATA command. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_SendCEATACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(vu32 *) CMD_ATACMD_BB = (u32)NewState; -} - -/******************************************************************************* -* Function Name : SDIO_GetFlagStatus -* Description : Checks whether the specified SDIO flag is set or not. -* Input : SDIO_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - SDIO_FLAG_CCRCFAIL: Command response received (CRC check -* failed) -* - SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check -* failed) -* - SDIO_FLAG_CTIMEOUT: Command response timeout -* - SDIO_FLAG_DTIMEOUT: Data timeou -* - SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error -* - SDIO_FLAG_RXOVERR: Received FIFO overrun error -* - SDIO_FLAG_CMDREND: Command response received (CRC check -* passed) -* - SDIO_FLAG_CMDSENT: Command sent (no response required) -* - SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) -* - SDIO_FLAG_STBITERR: Start bit not detected on all data -* signals in wide bus mode -* - SDIO_FLAG_DBCKEND: Data block sent/received (CRC check -* passed) -* - SDIO_FLAG_CMDACT: Command transfer in progress -* - SDIO_FLAG_TXACT: Data transmit in progress -* - SDIO_FLAG_RXACT: Data receive in progress -* - SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty -* - SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full -* - SDIO_FLAG_TXFIFOF: Transmit FIFO full -* - SDIO_FLAG_RXFIFOF: Receive FIFO full -* - SDIO_FLAG_TXFIFOE: Transmit FIFO empty -* - SDIO_FLAG_RXFIFOE: Receive FIFO empty -* - SDIO_FLAG_TXDAVL: Data available in transmit FIFO -* - SDIO_FLAG_RXDAVL: Data available in receive FIFO -* - SDIO_FLAG_SDIOIT: SD I/O interrupt received -* - SDIO_FLAG_CEATAEND: CE-ATA command completion signal -* received for CMD61 -* Output : None -* Return : The new state of SDIO_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus SDIO_GetFlagStatus(u32 SDIO_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_FLAG(SDIO_FLAG)); - - if ((SDIO->STA & SDIO_FLAG) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : SDIO_ClearFlag -* Description : Clears the SDIO's pending flags. -* Input : SDIO_FLAG: specifies the flag to clear. -* This parameter can be one or a combination of the following -* values: -* - SDIO_FLAG_CCRCFAIL: Command response received (CRC check -* failed) -* - SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check -* failed) -* - SDIO_FLAG_CTIMEOUT: Command response timeout -* - SDIO_FLAG_DTIMEOUT: Data timeou -* - SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error -* - SDIO_FLAG_RXOVERR: Received FIFO overrun error -* - SDIO_FLAG_CMDREND: Command response received (CRC check -* passed) -* - SDIO_FLAG_CMDSENT: Command sent (no response required) -* - SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) -* - SDIO_FLAG_STBITERR: Start bit not detected on all data -* signals in wide bus mode -* - SDIO_FLAG_DBCKEND: Data block sent/received (CRC check -* passed) -* - SDIO_FLAG_SDIOIT: SD I/O interrupt received -* - SDIO_FLAG_CEATAEND: CE-ATA command completion signal -* received for CMD61 -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ClearFlag(u32 SDIO_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); - - SDIO->ICR = SDIO_FLAG; -} - -/******************************************************************************* -* Function Name : SDIO_GetITStatus -* Description : Checks whether the specified SDIO interrupt has occurred or not. -* Input : SDIO_IT: specifies the SDIO interrupt source to check. -* This parameter can be one of the following values: -* - SDIO_IT_CCRCFAIL: Command response received (CRC check -* failed) interrupt -* - SDIO_IT_DCRCFAIL: Data block sent/received (CRC check -* failed) interrupt -* - SDIO_IT_CTIMEOUT: Command response timeout interrupt -* - SDIO_IT_DTIMEOUT: Data timeout interrupt -* - SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt -* - SDIO_IT_RXOVERR: Received FIFO overrun error interrupt -* - SDIO_IT_CMDREND: Command response received (CRC check -* passed) interrupt -* - SDIO_IT_CMDSENT: Command sent (no response required) -* interrupt -* - SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) interrupt -* - SDIO_IT_STBITERR: Start bit not detected on all data -* signals in wide bus mode interrupt -* - SDIO_IT_DBCKEND: Data block sent/received (CRC check -* passed) interrupt -* - SDIO_IT_CMDACT: Command transfer in progress interrupt -* - SDIO_IT_TXACT: Data transmit in progress interrupt -* - SDIO_IT_RXACT: Data receive in progress interrupt -* - SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt -* - SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt -* - SDIO_IT_TXFIFOF: Transmit FIFO full interrupt -* - SDIO_IT_RXFIFOF: Receive FIFO full interrupt -* - SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt -* - SDIO_IT_RXFIFOE: Receive FIFO empty interrupt -* - SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt -* - SDIO_IT_RXDAVL: Data available in receive FIFO interrupt -* - SDIO_IT_SDIOIT: SD I/O interrupt received interrupt -* - SDIO_IT_CEATAEND: CE-ATA command completion signal -* received for CMD61 interrupt -* Output : None -* Return : The new state of SDIO_IT (SET or RESET). -*******************************************************************************/ -ITStatus SDIO_GetITStatus(u32 SDIO_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_GET_IT(SDIO_IT)); - - if ((SDIO->STA & SDIO_IT) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : SDIO_ClearITPendingBit -* Description : Clears the SDIO’s interrupt pending bits. -* Input : SDIO_IT: specifies the interrupt pending bit to clear. -* This parameter can be one or a combination of the following -* values: -* - SDIO_IT_CCRCFAIL: Command response received (CRC check -* failed) interrupt -* - SDIO_IT_DCRCFAIL: Data block sent/received (CRC check -* failed) interrupt -* - SDIO_IT_CTIMEOUT: Command response timeout interrupt -* - SDIO_IT_DTIMEOUT: Data timeout interrupt -* - SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt -* - SDIO_IT_RXOVERR: Received FIFO overrun error interrupt -* - SDIO_IT_CMDREND: Command response received (CRC check -* passed) interrupt -* - SDIO_IT_CMDSENT: Command sent (no response required) -* interrupt -* - SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is -* zero) interrupt -* - SDIO_IT_STBITERR: Start bit not detected on all data -* signals in wide bus mode interrupt -* - SDIO_IT_SDIOIT: SD I/O interrupt received interrupt -* - SDIO_IT_CEATAEND: CE-ATA command completion signal -* received for CMD61 -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_ClearITPendingBit(u32 SDIO_IT) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); - - SDIO->ICR = SDIO_IT; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_spi.c b/bsp/stm32/library/src/stm32f10x_spi.c deleted file mode 100644 index 0ca5175c4..000000000 --- a/bsp/stm32/library/src/stm32f10x_spi.c +++ /dev/null @@ -1,863 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_spi.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the SPI firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_spi.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* SPI SPE mask */ -#define CR1_SPE_Set ((u16)0x0040) -#define CR1_SPE_Reset ((u16)0xFFBF) - -/* I2S I2SE mask */ -#define I2SCFGR_I2SE_Set ((u16)0x0400) -#define I2SCFGR_I2SE_Reset ((u16)0xFBFF) - -/* SPI CRCNext mask */ -#define CR1_CRCNext_Set ((u16)0x1000) - -/* SPI CRCEN mask */ -#define CR1_CRCEN_Set ((u16)0x2000) -#define CR1_CRCEN_Reset ((u16)0xDFFF) - -/* SPI SSOE mask */ -#define CR2_SSOE_Set ((u16)0x0004) -#define CR2_SSOE_Reset ((u16)0xFFFB) - -/* SPI registers Masks */ -#define CR1_CLEAR_Mask ((u16)0x3040) -#define I2SCFGR_CLEAR_Mask ((u16)0xF040) - -/* SPI or I2S mode selection masks */ -#define SPI_Mode_Select ((u16)0xF7FF) -#define I2S_Mode_Select ((u16)0x0800) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SPI_I2S_DeInit -* Description : Deinitializes the SPIx peripheral registers to their default -* reset values (Affects also the I2Ss). -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - switch (*(u32*)&SPIx) - { - case SPI1_BASE: - /* Enable SPI1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); - /* Release SPI1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); - break; - - case SPI2_BASE: - /* Enable SPI2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); - /* Release SPI2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); - break; - - case SPI3_BASE: - /* Enable SPI3 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); - /* Release SPI3 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : SPI_Init -* Description : Initializes the SPIx peripheral according to the specified -* parameters in the SPI_InitStruct. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_InitStruct: pointer to a SPI_InitTypeDef structure that -* contains the configuration information for the specified -* SPI peripheral. -* Output : None -* Return : None -******************************************************************************/ -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) -{ - u16 tmpreg = 0; - - /* check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Check the SPI parameters */ - assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); - assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); - assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); - assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); - assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); - assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); - assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); - -/*---------------------------- SPIx CR1 Configuration ------------------------*/ - /* Get the SPIx CR1 value */ - tmpreg = SPIx->CR1; - /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler - master/salve mode, CPOL and CPHA */ - /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ - /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ - /* Set LSBFirst bit according to SPI_FirstBit value */ - /* Set BR bits according to SPI_BaudRatePrescaler value */ - /* Set CPOL bit according to SPI_CPOL value */ - /* Set CPHA bit according to SPI_CPHA value */ - tmpreg |= (u16)((u32)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | - SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | - SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | - SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); - /* Write to SPIx CR1 */ - SPIx->CR1 = tmpreg; - - /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ - SPIx->I2SCFGR &= SPI_Mode_Select; - -/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ - /* Write to SPIx CRCPOLY */ - SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; -} - -/******************************************************************************* -* Function Name : I2S_Init -* Description : Initializes the SPIx peripheral according to the specified -* parameters in the I2S_InitStruct. -* Input : - SPIx: where x can be 2 or 3 to select the SPI peripheral -* (configured in I2S mode). -* - I2S_InitStruct: pointer to an I2S_InitTypeDef structure that -* contains the configuration information for the specified -* SPI peripheral configured in I2S mode. -* Output : None -* Return : None -******************************************************************************/ -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) -{ - u16 tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; - u32 tmp = 0; - RCC_ClocksTypeDef RCC_Clocks; - - /* Check the I2S parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); - assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); - assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); - assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); - -/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ - - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; - SPIx->I2SPR = 0x0002; - - /* Get the I2SCFGR register value */ - tmpreg = SPIx->I2SCFGR; - - /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ - if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) - { - i2sodd = (u16)0; - i2sdiv = (u16)2; - } - /* If the requested audio frequency is not the default, compute the prescaler */ - else - { - /* Check the frame length (For the Prescaler computing) */ - if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) - { - /* Packet length is 16 bits */ - packetlength = 1; - } - else - { - /* Packet length is 32 bits */ - packetlength = 2; - } - /* Get System Clock frequency */ - RCC_GetClocksFreq(&RCC_Clocks); - - /* Compute the Real divider depending on the MCLK output state with a flaoting point */ - if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) - { - /* MCLK output is enabled */ - tmp = (u16)(((10 * RCC_Clocks.SYSCLK_Frequency) / (256 * I2S_InitStruct->I2S_AudioFreq)) + 5); - } - else - { - /* MCLK output is disabled */ - tmp = (u16)(((10 * RCC_Clocks.SYSCLK_Frequency) / (32 * packetlength * I2S_InitStruct->I2S_AudioFreq)) + 5); - } - - /* Remove the flaoting point */ - tmp = tmp/10; - - /* Check the parity of the divider */ - i2sodd = (u16)(tmp & (u16)0x0001); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (u16)((tmp - i2sodd) / 2); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (u16) (i2sodd << 8); - } - - /* Test if the divider is 1 or 0 */ - if ((i2sdiv < 2) || (i2sdiv > 0xFF)) - { - /* Set the default values */ - i2sdiv = 2; - i2sodd = 0; - } - - /* Write to SPIx I2SPR register the computed value */ - SPIx->I2SPR = (u16)(i2sdiv | i2sodd | I2S_InitStruct->I2S_MCLKOutput); - - /* Configure the I2S with the SPI_InitStruct values */ - tmpreg |= (u16)(I2S_Mode_Select | I2S_InitStruct->I2S_Mode | \ - I2S_InitStruct->I2S_Standard | I2S_InitStruct->I2S_DataFormat | \ - I2S_InitStruct->I2S_CPOL); - - /* Write to SPIx I2SCFGR */ - SPIx->I2SCFGR = tmpreg; -} - -/******************************************************************************* -* Function Name : SPI_StructInit -* Description : Fills each SPI_InitStruct member with its default value. -* Input : - SPI_InitStruct : pointer to a SPI_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) -{ -/*--------------- Reset SPI init structure parameters values -----------------*/ - /* Initialize the SPI_Direction member */ - SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; - - /* initialize the SPI_Mode member */ - SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; - - /* initialize the SPI_DataSize member */ - SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; - - /* Initialize the SPI_CPOL member */ - SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; - - /* Initialize the SPI_CPHA member */ - SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; - - /* Initialize the SPI_NSS member */ - SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; - - /* Initialize the SPI_BaudRatePrescaler member */ - SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; - - /* Initialize the SPI_FirstBit member */ - SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; - - /* Initialize the SPI_CRCPolynomial member */ - SPI_InitStruct->SPI_CRCPolynomial = 7; -} - -/******************************************************************************* -* Function Name : I2S_StructInit -* Description : Fills each I2S_InitStruct member with its default value. -* Input : - I2S_InitStruct : pointer to a I2S_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) -{ -/*--------------- Reset I2S init structure parameters values -----------------*/ - /* Initialize the I2S_Mode member */ - I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; - - /* Initialize the I2S_Standard member */ - I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; - - /* Initialize the I2S_DataFormat member */ - I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; - - /* Initialize the I2S_MCLKOutput member */ - I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; - - /* Initialize the I2S_AudioFreq member */ - I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; - - /* Initialize the I2S_CPOL member */ - I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; -} - -/******************************************************************************* -* Function Name : SPI_Cmd -* Description : Enables or disables the specified SPI peripheral. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral */ - SPIx->CR1 |= CR1_SPE_Set; - } - else - { - /* Disable the selected SPI peripheral */ - SPIx->CR1 &= CR1_SPE_Reset; - } -} - -/******************************************************************************* -* Function Name : I2S_Cmd -* Description : Enables or disables the specified SPI peripheral (in I2S mode). -* Input : - SPIx: where x can be 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; - } - else - { - /* Disable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_ITConfig -* Description : Enables or disables the specified SPI/I2S interrupts. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_IT: specifies the SPI/I2S interrupt source to be -* enabled or disabled. -* This parameter can be one of the following values: -* - SPI_I2S_IT_TXE: Tx buffer empty interrupt mask -* - SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask -* - SPI_I2S_IT_ERR: Error interrupt mask -* - NewState: new state of the specified SPI/I2S interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, u8 SPI_I2S_IT, FunctionalState NewState) -{ - u16 itpos = 0, itmask = 0 ; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = SPI_I2S_IT >> 4; - /* Set the IT mask */ - itmask = (u16)((u16)1 << itpos); - - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S interrupt */ - SPIx->CR2 |= itmask; - } - else - { - /* Disable the selected SPI/I2S interrupt */ - SPIx->CR2 &= (u16)~itmask; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_DMACmd -* Description : Enables or disables the SPIx/I2Sx DMA interface. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request -* to be enabled or disabled. -* This parameter can be any combination of the following values: -* - SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request -* - SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request -* - NewState: new state of the selected SPI/I2S DMA transfer -* request. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, u16 SPI_I2S_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S DMA requests */ - SPIx->CR2 |= SPI_I2S_DMAReq; - } - else - { - /* Disable the selected SPI/I2S DMA requests */ - SPIx->CR2 &= (u16)~SPI_I2S_DMAReq; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_SendData -* Description : Transmits a Data through the SPIx/I2Sx peripheral. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - Data : Data to be transmitted.. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_SendData(SPI_TypeDef* SPIx, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Write in the DR register the data to be sent */ - SPIx->DR = Data; -} - -/******************************************************************************* -* Function Name : SPI_I2S_ReceiveData -* Description : Returns the most recent received data by the SPIx/I2Sx peripheral. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* Output : None -* Return : The value of the received data. -*******************************************************************************/ -u16 SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the data in the DR register */ - return SPIx->DR; -} - -/******************************************************************************* -* Function Name : SPI_NSSInternalSoftwareConfig -* Description : Configures internally by software the NSS pin for the selected -* SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_NSSInternalSoft: specifies the SPI NSS internal state. -* This parameter can be one of the following values: -* - SPI_NSSInternalSoft_Set: Set NSS pin internally -* - SPI_NSSInternalSoft_Reset: Reset NSS pin internally -* Output : None -* Return : None -*******************************************************************************/ -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, u16 SPI_NSSInternalSoft) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); - - if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) - { - /* Set NSS pin internally by software */ - SPIx->CR1 |= SPI_NSSInternalSoft_Set; - } - else - { - /* Reset NSS pin internally by software */ - SPIx->CR1 &= SPI_NSSInternalSoft_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_SSOutputCmd -* Description : Enables or disables the SS output for the selected SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx SS output. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI SS output */ - SPIx->CR2 |= CR2_SSOE_Set; - } - else - { - /* Disable the selected SPI SS output */ - SPIx->CR2 &= CR2_SSOE_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_DataSizeConfig -* Description : Configures the data size for the selected SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_DataSize: specifies the SPI data size. -* This parameter can be one of the following values: -* - SPI_DataSize_16b: Set data frame format to 16bit -* - SPI_DataSize_8b: Set data frame format to 8bit -* Output : None -* Return : None -*******************************************************************************/ -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, u16 SPI_DataSize) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DATASIZE(SPI_DataSize)); - - /* Clear DFF bit */ - SPIx->CR1 &= (u16)~SPI_DataSize_16b; - /* Set new DFF bit value */ - SPIx->CR1 |= SPI_DataSize; -} - -/******************************************************************************* -* Function Name : SPI_TransmitCRC -* Description : Transmit the SPIx CRC value. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_TransmitCRC(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Enable the selected SPI CRC transmission */ - SPIx->CR1 |= CR1_CRCNext_Set; -} - -/******************************************************************************* -* Function Name : SPI_CalculateCRC -* Description : Enables or disables the CRC value calculation of the -* transfered bytes. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - NewState: new state of the SPIx CRC value calculation. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected SPI CRC calculation */ - SPIx->CR1 |= CR1_CRCEN_Set; - } - else - { - /* Disable the selected SPI CRC calculation */ - SPIx->CR1 &= CR1_CRCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : SPI_GetCRC -* Description : Returns the transmit or the receive CRC register value for -* the specified SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_CRC: specifies the CRC register to be read. -* This parameter can be one of the following values: -* - SPI_CRC_Tx: Selects Tx CRC register -* - SPI_CRC_Rx: Selects Rx CRC register -* Output : None -* Return : The selected CRC register value.. -*******************************************************************************/ -u16 SPI_GetCRC(SPI_TypeDef* SPIx, u8 SPI_CRC) -{ - u16 crcreg = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_CRC(SPI_CRC)); - - if (SPI_CRC != SPI_CRC_Rx) - { - /* Get the Tx CRC register */ - crcreg = SPIx->TXCRCR; - } - else - { - /* Get the Rx CRC register */ - crcreg = SPIx->RXCRCR; - } - - /* Return the selected CRC register */ - return crcreg; -} - -/******************************************************************************* -* Function Name : SPI_GetCRCPolynomial -* Description : Returns the CRC Polynomial register value for the specified SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* Output : None -* Return : The CRC Polynomial register value. -*******************************************************************************/ -u16 SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the CRC polynomial register */ - return SPIx->CRCPR; -} - -/******************************************************************************* -* Function Name : SPI_BiDirectionalLineConfig -* Description : Selects the data transfer direction in bi-directional mode -* for the specified SPI. -* Input : - SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. -* - SPI_Direction: specifies the data transfer direction in -* bi-directional mode. -* This parameter can be one of the following values: -* - SPI_Direction_Tx: Selects Tx transmission direction -* - SPI_Direction_Rx: Selects Rx receive direction -* Output : None -* Return : None -*******************************************************************************/ -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, u16 SPI_Direction) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DIRECTION(SPI_Direction)); - - if (SPI_Direction == SPI_Direction_Tx) - { - /* Set the Tx only mode */ - SPIx->CR1 |= SPI_Direction_Tx; - } - else - { - /* Set the Rx only mode */ - SPIx->CR1 &= SPI_Direction_Rx; - } -} - -/******************************************************************************* -* Function Name : SPI_I2S_GetFlagStatus -* Description : Checks whether the specified SPI/I2S flag is set or not. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_FLAG: specifies the SPI/I2S flag to check. -* This parameter can be one of the following values: -* - SPI_I2S_FLAG_TXE: Transmit buffer empty flag. -* - SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. -* - SPI_I2S_FLAG_BSY: Busy flag. -* - SPI_I2S_FLAG_OVR: Overrun flag. -* - SPI_FLAG_MODF: Mode Fault flag. -* - SPI_FLAG_CRCERR: CRC Error flag. -* - I2S_FLAG_UDR: Underrun Error flag. -* - I2S_FLAG_CHSIDE: Channel Side flag. -* Output : None -* Return : The new state of SPI_I2S_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); - - /* Check the status of the specified SPI/I2S flag */ - if ((SPIx->SR & SPI_I2S_FLAG) != (u16)RESET) - { - /* SPI_I2S_FLAG is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_FLAG is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_FLAG status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : SPI_I2S_ClearFlag -* Description : Clears the SPIx CRC Error (CRCERR) flag. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - SPI_I2S_FLAG: specifies the SPI flag to clear. -* This function clears only CRCERR flag. -* Notes: -* - OVR (OverRun error) flag is cleared by software -* sequence: a read operation to SPI_DR register -* (SPI_I2S_ReceiveData()) followed by a read operation -* to SPI_SR register (SPI_I2S_GetFlagStatus()). -* - UDR (UnderRun error) flag is cleared by a read -* operation to SPI_SR register (SPI_I2S_GetFlagStatus()). -* - MODF (Mode Fault) flag is cleared by software sequence: -* a read/write operation to SPI_SR register -* (SPI_I2S_GetFlagStatus()) followed by a write -* operation to SPI_CR1 register (SPI_Cmd() to enable -* the SPI). -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, u16 SPI_I2S_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); - - /* Clear the selected SPI CRC Error (CRCERR) flag */ - SPIx->SR = (u16)~SPI_I2S_FLAG; -} - -/******************************************************************************* -* Function Name : SPI_I2S_GetITStatus -* Description : Checks whether the specified SPI/I2S interrupt has occurred or not. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - 2 or 3 in I2S mode -* - SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. -* This parameter can be one of the following values: -* - SPI_I2S_IT_TXE: Transmit buffer empty interrupt. -* - SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. -* - SPI_I2S_IT_OVR: Overrun interrupt. -* - SPI_IT_MODF: Mode Fault interrupt. -* - SPI_IT_CRCERR: CRC Error interrupt. -* - I2S_IT_UDR: Underrun Error interrupt. -* Output : None -* Return : The new state of SPI_I2S_IT (SET or RESET). -*******************************************************************************/ -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, u8 SPI_I2S_IT) -{ - ITStatus bitstatus = RESET; - u16 itpos = 0, itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = (u16)((u16)0x01 << (SPI_I2S_IT & (u8)0x0F)); - - /* Get the SPI/I2S IT mask */ - itmask = SPI_I2S_IT >> 4; - /* Set the IT mask */ - itmask = (u16)((u16)0x01 << itmask); - /* Get the SPI_I2S_IT enable bit status */ - enablestatus = (SPIx->CR2 & itmask) ; - - /* Check the status of the specified SPI/I2S interrupt */ - if (((SPIx->SR & itpos) != (u16)RESET) && enablestatus) - { - /* SPI_I2S_IT is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_IT is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_IT status */ - return bitstatus; -} - -/******************************************************************************* -* Function Name : SPI_I2S_ClearITPendingBit -* Description : Clears the SPIx CRC Error (CRCERR) interrupt pending bit. -* Input : - SPIx: where x can be : -* - 1, 2 or 3 in SPI mode -* - SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. -* This function clears only CRCERR intetrrupt pending bit. -* Notes: -* - OVR (OverRun Error) interrupt pending bit is cleared -* by software sequence: a read operation to SPI_DR -* register (SPI_I2S_ReceiveData()) followed by a read -* operation to SPI_SR register (SPI_I2S_GetITStatus()). -* - UDR (UnderRun Error) interrupt pending bit is cleared -* by a read operation to SPI_SR register -* (SPI_I2S_GetITStatus()). -* - MODF (Mode Fault) interrupt pending bit is cleared by -* software sequence: a read/write operation to SPI_SR -* register (SPI_I2S_GetITStatus()) followed by a write -* operation to SPI_CR1 register (SPI_Cmd() to enable the -* SPI). -* Output : None -* Return : None -*******************************************************************************/ -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, u8 SPI_I2S_IT) -{ - u16 itpos = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); - - /* Get the SPI IT index */ - itpos = (u16)((u16)0x01 << (SPI_I2S_IT & (u8)0x0F)); - /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ - SPIx->SR = (u16)~itpos; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_systick.c b/bsp/stm32/library/src/stm32f10x_systick.c deleted file mode 100644 index e3b67df4d..000000000 --- a/bsp/stm32/library/src/stm32f10x_systick.c +++ /dev/null @@ -1,181 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_systick.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the SysTick firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_systick.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ---------------------- SysTick registers bit mask -------------------- */ -/* CTRL TICKINT Mask */ -#define CTRL_TICKINT_Set ((u32)0x00000002) -#define CTRL_TICKINT_Reset ((u32)0xFFFFFFFD) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SysTick_CLKSourceConfig -* Description : Configures the SysTick clock source. -* Input : - SysTick_CLKSource: specifies the SysTick clock source. -* This parameter can be one of the following values: -* - SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 -* selected as SysTick clock source. -* - SysTick_CLKSource_HCLK: AHB clock selected as -* SysTick clock source. -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_CLKSourceConfig(u32 SysTick_CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); - - if (SysTick_CLKSource == SysTick_CLKSource_HCLK) - { - SysTick->CTRL |= SysTick_CLKSource_HCLK; - } - else - { - SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; - } -} - -/******************************************************************************* -* Function Name : SysTick_SetReload -* Description : Sets SysTick Reload value. -* Input : - Reload: SysTick Reload new value. -* This parameter must be a number between 1 and 0xFFFFFF. -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_SetReload(u32 Reload) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_RELOAD(Reload)); - - SysTick->LOAD = Reload; -} - -/******************************************************************************* -* Function Name : SysTick_CounterCmd -* Description : Enables or disables the SysTick counter. -* Input : - SysTick_Counter: new state of the SysTick counter. -* This parameter can be one of the following values: -* - SysTick_Counter_Disable: Disable counter -* - SysTick_Counter_Enable: Enable counter -* - SysTick_Counter_Clear: Clear counter value to 0 -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_CounterCmd(u32 SysTick_Counter) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_COUNTER(SysTick_Counter)); - - if (SysTick_Counter == SysTick_Counter_Enable) - { - SysTick->CTRL |= SysTick_Counter_Enable; - } - else if (SysTick_Counter == SysTick_Counter_Disable) - { - SysTick->CTRL &= SysTick_Counter_Disable; - } - else /* SysTick_Counter == SysTick_Counter_Clear */ - { - SysTick->VAL = SysTick_Counter_Clear; - } -} - -/******************************************************************************* -* Function Name : SysTick_ITConfig -* Description : Enables or disables the SysTick Interrupt. -* Input : - NewState: new state of the SysTick Interrupt. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void SysTick_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SysTick->CTRL |= CTRL_TICKINT_Set; - } - else - { - SysTick->CTRL &= CTRL_TICKINT_Reset; - } -} - -/******************************************************************************* -* Function Name : SysTick_GetCounter -* Description : Gets SysTick counter value. -* Input : None -* Output : None -* Return : SysTick current value -*******************************************************************************/ -u32 SysTick_GetCounter(void) -{ - return(SysTick->VAL); -} - -/******************************************************************************* -* Function Name : SysTick_GetFlagStatus -* Description : Checks whether the specified SysTick flag is set or not. -* Input : - SysTick_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - SysTick_FLAG_COUNT -* - SysTick_FLAG_SKEW -* - SysTick_FLAG_NOREF -* Output : None -* Return : None -*******************************************************************************/ -FlagStatus SysTick_GetFlagStatus(u8 SysTick_FLAG) -{ - u32 statusreg = 0, tmp = 0 ; - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SYSTICK_FLAG(SysTick_FLAG)); - - /* Get the SysTick register index */ - tmp = SysTick_FLAG >> 3; - - if (tmp == 2) /* The flag to check is in CTRL register */ - { - statusreg = SysTick->CTRL; - } - else /* The flag to check is in CALIB register */ - { - statusreg = SysTick->CALIB; - } - - if ((statusreg & ((u32)1 << SysTick_FLAG)) != (u32)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_tim.c b/bsp/stm32/library/src/stm32f10x_tim.c deleted file mode 100644 index cf27eaa06..000000000 --- a/bsp/stm32/library/src/stm32f10x_tim.c +++ /dev/null @@ -1,3219 +0,0 @@ -/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -* File Name : stm32f10x_tim.c -* Author : MCD Application Team -* Version : V2.0.3Patch1 -* Date : 04/06/2009 -* Description : This file provides all the TIM firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_tim.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ---------------------- TIM registers bit mask ------------------------ */ -#define CR1_CEN_Set ((u16)0x0001) -#define CR1_CEN_Reset ((u16)0x03FE) -#define CR1_UDIS_Set ((u16)0x0002) -#define CR1_UDIS_Reset ((u16)0x03FD) -#define CR1_URS_Set ((u16)0x0004) -#define CR1_URS_Reset ((u16)0x03FB) -#define CR1_OPM_Reset ((u16)0x03F7) -#define CR1_CounterMode_Mask ((u16)0x038F) -#define CR1_ARPE_Set ((u16)0x0080) -#define CR1_ARPE_Reset ((u16)0x037F) -#define CR1_CKD_Mask ((u16)0x00FF) - -#define CR2_CCPC_Set ((u16)0x0001) -#define CR2_CCPC_Reset ((u16)0xFFFE) -#define CR2_CCUS_Set ((u16)0x0004) -#define CR2_CCUS_Reset ((u16)0xFFFB) -#define CR2_CCDS_Set ((u16)0x0008) -#define CR2_CCDS_Reset ((u16)0xFFF7) -#define CR2_MMS_Mask ((u16)0xFF8F) -#define CR2_TI1S_Set ((u16)0x0080) -#define CR2_TI1S_Reset ((u16)0xFF7F) -#define CR2_OIS1_Reset ((u16)0x7EFF) -#define CR2_OIS1N_Reset ((u16)0x7DFF) -#define CR2_OIS2_Reset ((u16)0x7BFF) -#define CR2_OIS2N_Reset ((u16)0x77FF) -#define CR2_OIS3_Reset ((u16)0x6FFF) -#define CR2_OIS3N_Reset ((u16)0x5FFF) -#define CR2_OIS4_Reset ((u16)0x3FFF) - -#define SMCR_SMS_Mask ((u16)0xFFF8) -#define SMCR_ETR_Mask ((u16)0x00FF) -#define SMCR_TS_Mask ((u16)0xFF8F) -#define SMCR_MSM_Reset ((u16)0xFF7F) -#define SMCR_ECE_Set ((u16)0x4000) - -#define CCMR_CC13S_Mask ((u16)0xFFFC) -#define CCMR_CC24S_Mask ((u16)0xFCFF) -#define CCMR_TI13Direct_Set ((u16)0x0001) -#define CCMR_TI24Direct_Set ((u16)0x0100) -#define CCMR_OC13FE_Reset ((u16)0xFFFB) -#define CCMR_OC24FE_Reset ((u16)0xFBFF) -#define CCMR_OC13PE_Reset ((u16)0xFFF7) -#define CCMR_OC24PE_Reset ((u16)0xF7FF) -#define CCMR_OC13M_Mask ((u16)0xFF8F) -#define CCMR_OC24M_Mask ((u16)0x8FFF) - -#define CCMR_OC13CE_Reset ((u16)0xFF7F) -#define CCMR_OC24CE_Reset ((u16)0x7FFF) - -#define CCMR_IC13PSC_Mask ((u16)0xFFF3) -#define CCMR_IC24PSC_Mask ((u16)0xF3FF) -#define CCMR_IC13F_Mask ((u16)0xFF0F) -#define CCMR_IC24F_Mask ((u16)0x0FFF) - -#define CCMR_Offset ((u16)0x0018) -#define CCER_CCE_Set ((u16)0x0001) -#define CCER_CCNE_Set ((u16)0x0004) - -#define CCER_CC1P_Reset ((u16)0xFFFD) -#define CCER_CC2P_Reset ((u16)0xFFDF) -#define CCER_CC3P_Reset ((u16)0xFDFF) -#define CCER_CC4P_Reset ((u16)0xDFFF) - -#define CCER_CC1NP_Reset ((u16)0xFFF7) -#define CCER_CC2NP_Reset ((u16)0xFF7F) -#define CCER_CC3NP_Reset ((u16)0xF7FF) - -#define CCER_CC1E_Set ((u16)0x0001) -#define CCER_CC1E_Reset ((u16)0xFFFE) - -#define CCER_CC1NE_Reset ((u16)0xFFFB) - -#define CCER_CC2E_Set ((u16)0x0010) -#define CCER_CC2E_Reset ((u16)0xFFEF) - -#define CCER_CC2NE_Reset ((u16)0xFFBF) - -#define CCER_CC3E_Set ((u16)0x0100) -#define CCER_CC3E_Reset ((u16)0xFEFF) - -#define CCER_CC3NE_Reset ((u16)0xFBFF) - -#define CCER_CC4E_Set ((u16)0x1000) -#define CCER_CC4E_Reset ((u16)0xEFFF) - -#define BDTR_MOE_Set ((u16)0x8000) -#define BDTR_MOE_Reset ((u16)0x7FFF) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter); -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/******************************************************************************* -* Function Name : TIM_DeInit -* Description : Deinitializes the TIMx peripheral registers to their default -* reset values. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_DeInit(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - switch (*(u32*)&TIMx) - { - case TIM1_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); - break; - - case TIM2_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); - break; - - case TIM3_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); - break; - - case TIM4_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); - break; - - case TIM5_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); - break; - - case TIM6_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); - break; - - case TIM7_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); - break; - - case TIM8_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : TIM_TimeBaseInit -* Description : Initializes the TIMx Time Base Unit peripheral according to -* the specified parameters in the TIM_TimeBaseInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef -* structure that contains the configuration information for -* the specified TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); - assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); - - /* Select the Counter Mode and set the clock division */ - TIMx->CR1 &= CR1_CKD_Mask & CR1_CounterMode_Mask; - TIMx->CR1 |= (u32)TIM_TimeBaseInitStruct->TIM_ClockDivision | - TIM_TimeBaseInitStruct->TIM_CounterMode; - /* Set the Autoreload value */ - TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; - - /* Set the Prescaler value */ - TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; - - if (((*(u32*)&TIMx) == TIM1_BASE) || ((*(u32*)&TIMx) == TIM8_BASE)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler value immediatly */ - TIMx->EGR = TIM_PSCReloadMode_Immediate; -} - -/******************************************************************************* -* Function Name : TIM_OC1Init -* Description : Initializes the TIMx Channel1 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= CCER_CC1E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC13M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC1P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; - - /* Set the Output State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputState; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC1NP_Reset; - - /* Set the Output N Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; - - /* Reset the Output N State */ - tmpccer &= CCER_CC1NE_Reset; - - /* Set the Output N State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputNState; - - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS1_Reset; - tmpcr2 &= CR2_OIS1N_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; - - /* Set the Output N Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC2Init -* Description : Initializes the TIMx Channel2 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC2E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC24M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= (u16)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC2P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 4); - - /* Set the Output State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 4); - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC2NP_Reset; - - /* Set the Output N Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCNPolarity << 4); - - /* Reset the Output N State */ - tmpccer &= CCER_CC2NE_Reset; - - /* Set the Output N State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputNState << 4); - - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS2_Reset; - tmpcr2 &= CR2_OIS2N_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 2); - - /* Set the Output N Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCNIdleState << 2); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC3Init -* Description : Initializes the TIMx Channel3 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC3E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC13M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC3P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 8); - - /* Set the Output State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 8); - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC3NP_Reset; - - /* Set the Output N Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCNPolarity << 8); - - /* Reset the Output N State */ - tmpccer &= CCER_CC3NE_Reset; - - /* Set the Output N State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputNState << 8); - - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS3_Reset; - tmpcr2 &= CR2_OIS3N_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 4); - - /* Set the Output N Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCNIdleState << 4); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC4Init -* Description : Initializes the TIMx Channel4 according to the specified -* parameters in the TIM_OCInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - u16 tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - - /* Disable the Channel 2: Reset the CC4E Bit */ - TIMx->CCER &= CCER_CC4E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC24M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= (u16)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC4P_Reset; - - /* Set the Output Compare Polarity */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OCPolarity << 12); - - /* Set the Output State */ - tmpccer |= (u16)(TIM_OCInitStruct->TIM_OutputState << 12); - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; - - if((*(u32*)&TIMx == TIM1_BASE) || (*(u32*)&TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Ouput Compare IDLE State */ - tmpcr2 &= CR2_OIS4_Reset; - - /* Set the Output Idle state */ - tmpcr2 |= (u16)(TIM_OCInitStruct->TIM_OCIdleState << 6); - } - - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_ICInit -* Description : Initializes the TIM peripheral according to the specified -* parameters in the TIM_ICInitStruct. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); - - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) - { - /* TI3 Configuration */ - TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI4 Configuration */ - TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/******************************************************************************* -* Function Name : TIM_PWMIConfig -* Description : Configures the TIM peripheral according to the specified -* parameters in the TIM_ICInitStruct to measure an external PWM -* signal. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure -* that contains the configuration information for the specified -* TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - u16 icoppositepolarity = TIM_ICPolarity_Rising; - u16 icoppositeselection = TIM_ICSelection_DirectTI; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Select the Opposite Input Polarity */ - if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) - { - icoppositepolarity = TIM_ICPolarity_Falling; - } - else - { - icoppositepolarity = TIM_ICPolarity_Rising; - } - - /* Select the Opposite Input */ - if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) - { - icoppositeselection = TIM_ICSelection_IndirectTI; - } - else - { - icoppositeselection = TIM_ICSelection_DirectTI; - } - - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - - /* TI2 Configuration */ - TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - - /* TI1 Configuration */ - TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/******************************************************************************* -* Function Name : TIM_BDTRConfig -* Description : Configures the: Break feature, dead time, Lock level, the OSSI, -* the OSSR State and the AOE(automatic output enable). -* Input :- TIMx: where x can be 1 or 8 to select the TIM -* - TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef -* structure that contains the BDTR Register configuration -* information for the TIM peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); - assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); - assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); - assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); - assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); - - /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - - TIMx->BDTR = (u32)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | - TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | - TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | - TIM_BDTRInitStruct->TIM_AutomaticOutput; - -} - -/******************************************************************************* -* Function Name : TIM_TimeBaseStructInit -* Description : Fills each TIM_TimeBaseInitStruct member with its default value. -* Input : - TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Set the default configuration */ - TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; - TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; - TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; - TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; -} - -/******************************************************************************* -* Function Name : TIM_OCStructInit -* Description : Fills each TIM_OCInitStruct member with its default value. -* Input : - TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - /* Set the default configuration */ - TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; - TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; - TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; - TIM_OCInitStruct->TIM_Pulse = 0x0000; - TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; - TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; -} - -/******************************************************************************* -* Function Name : TIM_ICStructInit -* Description : Fills each TIM_ICInitStruct member with its default value. -* Input : - TIM_ICInitStruct : pointer to a TIM_ICInitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Set the default configuration */ - TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; - TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; - TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; - TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; - TIM_ICInitStruct->TIM_ICFilter = 0x00; -} - -/******************************************************************************* -* Function Name : TIM_BDTRStructInit -* Description : Fills each TIM_BDTRInitStruct member with its default value. -* Input : - TIM_BDTRInitStruct : pointer to a TIM_BDTRInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) -{ - /* Set the default configuration */ - TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; - TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; - TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; - TIM_BDTRInitStruct->TIM_DeadTime = 0x00; - TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; - TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; - TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; -} - -/******************************************************************************* -* Function Name : TIM_Cmd -* Description : Enables or disables the specified TIM peripheral. -* Input : - TIMx: where x can be 1 to 8 to select the TIMx peripheral. -* - NewState: new state of the TIMx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Counter */ - TIMx->CR1 |= CR1_CEN_Set; - } - else - { - /* Disable the TIM Counter */ - TIMx->CR1 &= CR1_CEN_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_CtrlPWMOutputs -* Description : Enables or disables the TIM peripheral Main Outputs. -* Input :- TIMx: where x can be 1 or 8 to select the TIMx peripheral. -* - NewState: new state of the TIM peripheral Main Outputs. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Main Output */ - TIMx->BDTR |= BDTR_MOE_Set; - } - else - { - /* Disable the TIM Main Output */ - TIMx->BDTR &= BDTR_MOE_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_ITConfig -* Description : Enables or disables the specified TIM interrupts. -* Input : - TIMx: where x can be 1 to 8 to select the TIMx peripheral. -* - TIM_IT: specifies the TIM interrupts sources to be enabled -* or disabled. -* This parameter can be any combination of the following values: -* - TIM_IT_Update: TIM update Interrupt source -* - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source -* - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source -* - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source -* - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source -* - TIM_IT_COM: TIM Commutation Interrupt source -* - TIM_IT_Trigger: TIM Trigger Interrupt source -* - TIM_IT_Break: TIM Break Interrupt source -* - NewState: new state of the TIM interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ITConfig(TIM_TypeDef* TIMx, u16 TIM_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - assert_param(IS_TIM_PERIPH_IT((TIMx), (TIM_IT))); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Interrupt sources */ - TIMx->DIER |= TIM_IT; - } - else - { - /* Disable the Interrupt sources */ - TIMx->DIER &= (u16)~TIM_IT; - } -} - -/******************************************************************************* -* Function Name : TIM_GenerateEvent -* Description : Configures the TIMx event to be generate by software. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_EventSource: specifies the event source. -* This parameter can be one or more of the following values: -* - TIM_EventSource_Update: Timer update Event source -* - TIM_EventSource_CC1: Timer Capture Compare 1 Event source -* - TIM_EventSource_CC2: Timer Capture Compare 2 Event source -* - TIM_EventSource_CC3: Timer Capture Compare 3 Event source -* - TIM_EventSource_CC4: Timer Capture Compare 4 Event source -* - TIM_EventSource_Trigger: Timer Trigger Event source -* Output : None -* Return : None -*******************************************************************************/ -void TIM_GenerateEvent(TIM_TypeDef* TIMx, u16 TIM_EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); - assert_param(IS_TIM_PERIPH_EVENT((TIMx), (TIM_EventSource))); - - /* Set the event sources */ - TIMx->EGR = TIM_EventSource; -} - -/******************************************************************************* -* Function Name : TIM_DMAConfig -* Description : Configures the TIMx’s DMA interface. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_DMABase: DMA Base address. -* This parameter can be one of the following values: -* - TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, -* TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, -* TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, -* TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, -* TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, -* TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, -* TIM_DMABase_DCR. -* - TIM_DMABurstLength: DMA Burst length. -* This parameter can be one value between: -* TIM_DMABurstLength_1Byte and TIM_DMABurstLength_18Bytes. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_DMAConfig(TIM_TypeDef* TIMx, u16 TIM_DMABase, u16 TIM_DMABurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); - assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); - - /* Set the DMA Base and the DMA Burst Length */ - TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; -} - -/******************************************************************************* -* Function Name : TIM_DMACmd -* Description : Enables or disables the TIMx’s DMA Requests. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_DMASources: specifies the DMA Request sources. -* This parameter can be any combination of the following values: -* - TIM_DMA_Update: TIM update Interrupt source -* - TIM_DMA_CC1: TIM Capture Compare 1 DMA source -* - TIM_DMA_CC2: TIM Capture Compare 2 DMA source -* - TIM_DMA_CC3: TIM Capture Compare 3 DMA source -* - TIM_DMA_CC4: TIM Capture Compare 4 DMA source -* - TIM_DMA_COM: TIM Commutation DMA source -* - TIM_DMA_Trigger: TIM Trigger DMA source -* - NewState: new state of the DMA Request sources. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_DMACmd(TIM_TypeDef* TIMx, u16 TIM_DMASource, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); - assert_param(IS_TIM_PERIPH_DMA(TIMx, TIM_DMASource)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA sources */ - TIMx->DIER |= TIM_DMASource; - } - else - { - /* Disable the DMA sources */ - TIMx->DIER &= (u16)~TIM_DMASource; - } -} - -/******************************************************************************* -* Function Name : TIM_InternalClockConfig -* Description : Configures the TIMx interrnal Clock -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_InternalClockConfig(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Disable slave mode to clock the prescaler directly with the internal clock */ - TIMx->SMCR &= SMCR_SMS_Mask; -} -/******************************************************************************* -* Function Name : TIM_ITRxExternalClockConfig -* Description : Configures the TIMx Internal Trigger as External Clock -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ITRSource: Trigger source. -* This parameter can be one of the following values: -* - TIM_TS_ITR0: Internal Trigger 0 -* - TIM_TS_ITR1: Internal Trigger 1 -* - TIM_TS_ITR2: Internal Trigger 2 -* - TIM_TS_ITR3: Internal Trigger 3 -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); - - /* Select the Internal Trigger */ - TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); - - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} -/******************************************************************************* -* Function Name : TIM_TIxExternalClockConfig -* Description : Configures the TIMx Trigger as External Clock -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_TIxExternalCLKSource: Trigger source. -* This parameter can be one of the following values: -* - TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector -* - TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 -* - TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 -* - TIM_ICPolarity: specifies the TIx Polarity. -* This parameter can be: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - ICFilter : specifies the filter value. -* This parameter must be a value between 0x0 and 0xF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, u16 TIM_TIxExternalCLKSource, - u16 TIM_ICPolarity, u16 ICFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); - assert_param(IS_TIM_IC_FILTER(ICFilter)); - - /* Configure the Timer Input Clock Source */ - if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) - { - TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - else - { - TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - - /* Select the Trigger source */ - TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); - - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/******************************************************************************* -* Function Name : TIM_ETRClockMode1Config -* Description : Configures the External clock Mode1 -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ExtTRGPrescaler: The external Trigger Prescaler. -* It can be one of the following values: -* - TIM_ExtTRGPSC_OFF -* - TIM_ExtTRGPSC_DIV2 -* - TIM_ExtTRGPSC_DIV4 -* - TIM_ExtTRGPSC_DIV8. -* - TIM_ExtTRGPolarity: The external Trigger Polarity. -* It can be one of the following values: -* - TIM_ExtTRGPolarity_Inverted -* - TIM_ExtTRGPolarity_NonInverted -* - ExtTRGFilter: External Trigger Filter. -* This parameter must be a value between 0x00 and 0x0F -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter) -{ - u16 tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Reset the SMS Bits */ - tmpsmcr &= SMCR_SMS_Mask; - /* Select the External clock mode1 */ - tmpsmcr |= TIM_SlaveMode_External1; - - /* Select the Trigger selection : ETRF */ - tmpsmcr &= SMCR_TS_Mask; - tmpsmcr |= TIM_TS_ETRF; - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/******************************************************************************* -* Function Name : TIM_ETRClockMode2Config -* Description : Configures the External clock Mode2 -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ExtTRGPrescaler: The external Trigger Prescaler. -* It can be one of the following values: -* - TIM_ExtTRGPSC_OFF -* - TIM_ExtTRGPSC_DIV2 -* - TIM_ExtTRGPSC_DIV4 -* - TIM_ExtTRGPSC_DIV8 -* - TIM_ExtTRGPolarity: The external Trigger Polarity. -* It can be one of the following values: -* - TIM_ExtTRGPolarity_Inverted -* - TIM_ExtTRGPolarity_NonInverted -* - ExtTRGFilter: External Trigger Filter. -* This parameter must be a value between 0x00 and 0x0F -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, - u16 TIM_ExtTRGPolarity, u16 ExtTRGFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Enable the External clock mode2 */ - TIMx->SMCR |= SMCR_ECE_Set; -} - -/******************************************************************************* -* Function Name : TIM_ETRConfig -* Description : Configures the TIMx External Trigger (ETR). -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ExtTRGPrescaler: The external Trigger Prescaler. -* This parameter can be one of the following values: -* - TIM_ExtTRGPSC_OFF -* - TIM_ExtTRGPSC_DIV2 -* - TIM_ExtTRGPSC_DIV4 -* - TIM_ExtTRGPSC_DIV8 -* - TIM_ExtTRGPolarity: The external Trigger Polarity. -* This parameter can be one of the following values: -* - TIM_ExtTRGPolarity_Inverted -* - TIM_ExtTRGPolarity_NonInverted -* - ExtTRGFilter: External Trigger Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ETRConfig(TIM_TypeDef* TIMx, u16 TIM_ExtTRGPrescaler, u16 TIM_ExtTRGPolarity, - u16 ExtTRGFilter) -{ - u16 tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - - tmpsmcr = TIMx->SMCR; - - /* Reset the ETR Bits */ - tmpsmcr &= SMCR_ETR_Mask; - - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= TIM_ExtTRGPrescaler | TIM_ExtTRGPolarity | (u16)(ExtTRGFilter << 8); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/******************************************************************************* -* Function Name : TIM_PrescalerConfig -* Description : Configures the TIMx Prescaler. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - Prescaler: specifies the Prescaler Register value -* - TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode -* This parameter can be one of the following values: -* - TIM_PSCReloadMode_Update: The Prescaler is loaded at -* the update event. -* - TIM_PSCReloadMode_Immediate: The Prescaler is loaded -* immediatly. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, u16 Prescaler, u16 TIM_PSCReloadMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); - - /* Set the Prescaler value */ - TIMx->PSC = Prescaler; - - /* Set or reset the UG Bit */ - TIMx->EGR = TIM_PSCReloadMode; -} - -/******************************************************************************* -* Function Name : TIM_CounterModeConfig -* Description : Specifies the TIMx Counter Mode to be used. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_CounterMode: specifies the Counter Mode to be used -* This parameter can be one of the following values: -* - TIM_CounterMode_Up: TIM Up Counting Mode -* - TIM_CounterMode_Down: TIM Down Counting Mode -* - TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 -* - TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 -* - TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, u16 TIM_CounterMode) -{ - u16 tmpcr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); - - tmpcr1 = TIMx->CR1; - - /* Reset the CMS and DIR Bits */ - tmpcr1 &= CR1_CounterMode_Mask; - - /* Set the Counter Mode */ - tmpcr1 |= TIM_CounterMode; - - /* Write to TIMx CR1 register */ - TIMx->CR1 = tmpcr1; -} - -/******************************************************************************* -* Function Name : TIM_SelectInputTrigger -* Description : Selects the Input Trigger source -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_InputTriggerSource: The Input Trigger source. -* This parameter can be one of the following values: -* - TIM_TS_ITR0: Internal Trigger 0 -* - TIM_TS_ITR1: Internal Trigger 1 -* - TIM_TS_ITR2: Internal Trigger 2 -* - TIM_TS_ITR3: Internal Trigger 3 -* - TIM_TS_TI1F_ED: TI1 Edge Detector -* - TIM_TS_TI1FP1: Filtered Timer Input 1 -* - TIM_TS_TI2FP2: Filtered Timer Input 2 -* - TIM_TS_ETRF: External Trigger input -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, u16 TIM_InputTriggerSource) -{ - u16 tmpsmcr = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Reset the TS Bits */ - tmpsmcr &= SMCR_TS_Mask; - - /* Set the Input Trigger source */ - tmpsmcr |= TIM_InputTriggerSource; - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/******************************************************************************* -* Function Name : TIM_EncoderInterfaceConfig -* Description : Configures the TIMx Encoder Interface. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_EncoderMode: specifies the TIMx Encoder Mode. -* This parameter can be one of the following values: -* - TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge -* depending on TI2FP2 level. -* - TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge -* depending on TI1FP1 level. -* - TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and -* TI2FP2 edges depending on the level of the other input. -* - TIM_IC1Polarity: specifies the IC1 Polarity -* This parmeter can be one of the following values: -* - TIM_ICPolarity_Falling: IC Falling edge. -* - TIM_ICPolarity_Rising: IC Rising edge. -* - TIM_IC2Polarity: specifies the IC2 Polarity -* This parmeter can be one of the following values: -* - TIM_ICPolarity_Falling: IC Falling edge. -* - TIM_ICPolarity_Rising: IC Rising edge. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, u16 TIM_EncoderMode, - u16 TIM_IC1Polarity, u16 TIM_IC2Polarity) -{ - u16 tmpsmcr = 0; - u16 tmpccmr1 = 0; - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Set the encoder Mode */ - tmpsmcr &= SMCR_SMS_Mask; - tmpsmcr |= TIM_EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= CCMR_CC13S_Mask & CCMR_CC24S_Mask; - tmpccmr1 |= CCMR_TI13Direct_Set | CCMR_TI24Direct_Set; - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= CCER_CC1P_Reset & CCER_CC2P_Reset; - tmpccer |= (TIM_IC1Polarity | (u16)(TIM_IC2Polarity << 4)); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC1Config -* Description : Forces the TIMx output 1 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC1REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC1REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1M Bits */ - tmpccmr1 &= CCMR_OC13M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr1 |= TIM_ForcedAction; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC2Config -* Description : Forces the TIMx output 2 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC2REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC2REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2M Bits */ - tmpccmr1 &= CCMR_OC24M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr1 |= (u16)(TIM_ForcedAction << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC3Config -* Description : Forces the TIMx output 3 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC3REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC3REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC1M Bits */ - tmpccmr2 &= CCMR_OC13M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr2 |= TIM_ForcedAction; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ForcedOC4Config -* Description : Forces the TIMx output 4 waveform to active or inactive level. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ForcedAction: specifies the forced Action to be set to -* the output waveform. -* This parameter can be one of the following values: -* - TIM_ForcedAction_Active: Force active level on OC4REF -* - TIM_ForcedAction_InActive: Force inactive level on -* OC4REF. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, u16 TIM_ForcedAction) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC2M Bits */ - tmpccmr2 &= CCMR_OC24M_Mask; - - /* Configure The Forced output Mode */ - tmpccmr2 |= (u16)(TIM_ForcedAction << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ARRPreloadConfig -* Description : Enables or disables TIMx peripheral Preload register on ARR. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - NewState: new state of the TIMx peripheral Preload register -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the ARR Preload Bit */ - TIMx->CR1 |= CR1_ARPE_Set; - } - else - { - /* Reset the ARR Preload Bit */ - TIMx->CR1 &= CR1_ARPE_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectCOM -* Description : Selects the TIM peripheral Commutation event. -* Input :- TIMx: where x can be 1 or 8 to select the TIMx peripheral -* - NewState: new state of the Commutation event. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the COM Bit */ - TIMx->CR2 |= CR2_CCUS_Set; - } - else - { - /* Reset the COM Bit */ - TIMx->CR2 &= CR2_CCUS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectCCDMA -* Description : Selects the TIMx peripheral Capture Compare DMA source. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - NewState: new state of the Capture Compare DMA source -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the CCDS Bit */ - TIMx->CR2 |= CR2_CCDS_Set; - } - else - { - /* Reset the CCDS Bit */ - TIMx->CR2 &= CR2_CCDS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_CCPreloadControl -* Description : Sets or Resets the TIM peripheral Capture Compare Preload -* Control bit. -* Input :- TIMx: where x can be 1 or 8 to select the TIMx peripheral -* - NewState: new state of the Capture Compare Preload Control bit -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the CCPC Bit */ - TIMx->CR2 |= CR2_CCPC_Set; - } - else - { - /* Reset the CCPC Bit */ - TIMx->CR2 &= CR2_CCPC_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_OC1PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR1. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1PE Bit */ - tmpccmr1 &= CCMR_OC13PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= TIM_OCPreload; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC2PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR2. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2PE Bit */ - tmpccmr1 &= CCMR_OC24PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= (u16)(TIM_OCPreload << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC3PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR3. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3PE Bit */ - tmpccmr2 &= CCMR_OC13PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= TIM_OCPreload; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC4PreloadConfig -* Description : Enables or disables the TIMx peripheral Preload register on CCR4. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPreload: new state of the TIMx peripheral Preload -* register -* This parameter can be one of the following values: -* - TIM_OCPreload_Enable -* - TIM_OCPreload_Disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, u16 TIM_OCPreload) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4PE Bit */ - tmpccmr2 &= CCMR_OC24PE_Reset; - - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= (u16)(TIM_OCPreload << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC1FastConfig -* Description : Configures the TIMx Output Compare 1 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1FE Bit */ - tmpccmr1 &= CCMR_OC13FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= TIM_OCFast; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC2FastConfig -* Description : Configures the TIMx Output Compare 2 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2FE Bit */ - tmpccmr1 &= CCMR_OC24FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= (u16)(TIM_OCFast << 8); - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_OC3FastConfig -* Description : Configures the TIMx Output Compare 3 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3FE Bit */ - tmpccmr2 &= CCMR_OC13FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= TIM_OCFast; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC4FastConfig -* Description : Configures the TIMx Output Compare 4 Fast feature. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCFast: new state of the Output Compare Fast Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCFast_Enable: TIM output compare fast enable -* - TIM_OCFast_Disable: TIM output compare fast disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, u16 TIM_OCFast) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4FE Bit */ - tmpccmr2 &= CCMR_OC24FE_Reset; - - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= (u16)(TIM_OCFast << 8); - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC1Ref -* Description : Clears or safeguards the OCREF1 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC1CE Bit */ - tmpccmr1 &= CCMR_OC13CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= TIM_OCClear; - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC2Ref -* Description : Clears or safeguards the OCREF2 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr1 = TIMx->CCMR1; - - /* Reset the OC2CE Bit */ - tmpccmr1 &= CCMR_OC24CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= (u16)(TIM_OCClear << 8); - - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC3Ref -* Description : Clears or safeguards the OCREF3 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC3CE Bit */ - tmpccmr2 &= CCMR_OC13CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= TIM_OCClear; - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_ClearOC4Ref -* Description : Clears or safeguards the OCREF4 signal on an external event -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCClear: new state of the Output Compare Clear Enable Bit. -* This parameter can be one of the following values: -* - TIM_OCClear_Enable: TIM Output clear enable -* - TIM_OCClear_Disable: TIM Output clear disable -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, u16 TIM_OCClear) -{ - u16 tmpccmr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - - tmpccmr2 = TIMx->CCMR2; - - /* Reset the OC4CE Bit */ - tmpccmr2 &= CCMR_OC24CE_Reset; - - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= (u16)(TIM_OCClear << 8); - - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/******************************************************************************* -* Function Name : TIM_OC1PolarityConfig -* Description : Configures the TIMx channel 1 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC1 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC1P Bit */ - tmpccer &= CCER_CC1P_Reset; - tmpccer |= TIM_OCPolarity; - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC1NPolarityConfig -* Description : Configures the TIMx Channel 1N polarity. -* Input : - TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_OCNPolarity: specifies the OC1N Polarity -* This parmeter can be one of the following values: -* - TIM_OCNPolarity_High: Output Compare active high -* - TIM_OCNPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC1NP Bit */ - tmpccer &= CCER_CC1NP_Reset; - tmpccer |= TIM_OCNPolarity; - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC2PolarityConfig -* Description : Configures the TIMx channel 2 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC2 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC2P Bit */ - tmpccer &= CCER_CC2P_Reset; - tmpccer |= (u16)(TIM_OCPolarity << 4); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC2NPolarityConfig -* Description : Configures the TIMx Channel 2N polarity. -* Input : - TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_OCNPolarity: specifies the OC2N Polarity -* This parmeter can be one of the following values: -* - TIM_OCNPolarity_High: Output Compare active high -* - TIM_OCNPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC2NP Bit */ - tmpccer &= CCER_CC2NP_Reset; - tmpccer |= (u16)(TIM_OCNPolarity << 4); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC3PolarityConfig -* Description : Configures the TIMx channel 3 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC3 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC3P Bit */ - tmpccer &= CCER_CC3P_Reset; - tmpccer |= (u16)(TIM_OCPolarity << 8); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC3NPolarityConfig -* Description : Configures the TIMx Channel 3N polarity. -* Input : - TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_OCNPolarity: specifies the OC3N Polarity -* This parmeter can be one of the following values: -* - TIM_OCNPolarity_High: Output Compare active high -* - TIM_OCNPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCNPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC3NP Bit */ - tmpccer &= CCER_CC3NP_Reset; - tmpccer |= (u16)(TIM_OCNPolarity << 8); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_OC4PolarityConfig -* Description : Configures the TIMx channel 4 polarity. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_OCPolarity: specifies the OC4 Polarity -* This parmeter can be one of the following values: -* - TIM_OCPolarity_High: Output Compare active high -* - TIM_OCPolarity_Low: Output Compare active low -* Output : None -* Return : None -*******************************************************************************/ -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, u16 TIM_OCPolarity) -{ - u16 tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - - tmpccer = TIMx->CCER; - - /* Set or Reset the CC4P Bit */ - tmpccer &= CCER_CC4P_Reset; - tmpccer |= (u16)(TIM_OCPolarity << 12); - - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TIM_CCxCmd -* Description : Enables or disables the TIM Capture Compare Channel x. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_Channel: specifies the TIM Channel -* This parmeter can be one of the following values: -* - TIM_Channel_1: TIM Channel 1 -* - TIM_Channel_2: TIM Channel 2 -* - TIM_Channel_3: TIM Channel 3 -* - TIM_Channel_4: TIM Channel 4 -* - TIM_CCx: specifies the TIM Channel CCxE bit new state. -* This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CCxCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCX(TIM_CCx)); - - /* Reset the CCxE Bit */ - TIMx->CCER &= (u16)(~((u16)(CCER_CCE_Set << TIM_Channel))); - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (u16)(TIM_CCx << TIM_Channel); -} - -/******************************************************************************* -* Function Name : TIM_CCxNCmd -* Description : Enables or disables the TIM Capture Compare Channel xN. -* Input :- TIMx: where x can be 1 or 8 to select the TIM peripheral. -* - TIM_Channel: specifies the TIM Channel -* This parmeter can be one of the following values: -* - TIM_Channel_1: TIM Channel 1 -* - TIM_Channel_2: TIM Channel 2 -* - TIM_Channel_3: TIM Channel 3 -* - TIM_CCx: specifies the TIM Channel CCxNE bit new state. -* This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_CCxNCmd(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_CCxN) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCXN(TIM_CCxN)); - - /* Reset the CCxNE Bit */ - TIMx->CCER &= (u16)(~((u16)(CCER_CCNE_Set << TIM_Channel))); - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (u16)(TIM_CCxN << TIM_Channel); -} - -/******************************************************************************* -* Function Name : TIM_SelectOCxM -* Description : Selects the TIM Ouput Compare Mode. -* This function disables the selected channel before changing -* the Ouput Compare Mode. User has to enable this channel using -* TIM_CCxCmd and TIM_CCxNCmd functions. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_Channel: specifies the TIM Channel -* This parmeter can be one of the following values: -* - TIM_Channel_1: TIM Channel 1 -* - TIM_Channel_2: TIM Channel 2 -* - TIM_Channel_3: TIM Channel 3 -* - TIM_Channel_4: TIM Channel 4 -* - TIM_OCMode: specifies the TIM Output Compare Mode. -* This paramter can be one of the following values: -* - TIM_OCMode_Timing -* - TIM_OCMode_Active -* - TIM_OCMode_Toggle -* - TIM_OCMode_PWM1 -* - TIM_OCMode_PWM2 -* - TIM_ForcedAction_Active -* - TIM_ForcedAction_InActive -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectOCxM(TIM_TypeDef* TIMx, u16 TIM_Channel, u16 TIM_OCMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_OCM(TIM_OCMode)); - - /* Disable the Channel: Reset the CCxE Bit */ - TIMx->CCER &= (u16)(~((u16)(CCER_CCE_Set << TIM_Channel))); - - if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) - { - /* Reset the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + (TIM_Channel>>1))) &= CCMR_OC13M_Mask; - - /* Configure the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + (TIM_Channel>>1))) |= TIM_OCMode; - - } - else - { - /* Reset the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + ((u16)(TIM_Channel - 4)>> 1))) &= CCMR_OC24M_Mask; - - /* Configure the OCxM bits in the CCMRx register */ - *((vu32 *)((*(u32*)&TIMx) + CCMR_Offset + ((u16)(TIM_Channel - 4)>> 1))) |= (u16)(TIM_OCMode << 8); - } -} - -/******************************************************************************* -* Function Name : TIM_UpdateDisableConfig -* Description : Enables or Disables the TIMx Update event. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - NewState: new state of the TIMx UDIS bit -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the Update Disable Bit */ - TIMx->CR1 |= CR1_UDIS_Set; - } - else - { - /* Reset the Update Disable Bit */ - TIMx->CR1 &= CR1_UDIS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_UpdateRequestConfig -* Description : Configures the TIMx Update Request Interrupt source. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_UpdateSource: specifies the Update source. -* This parameter can be one of the following values: -* - TIM_UpdateSource_Regular -* - TIM_UpdateSource_Global -* Output : None -* Return : None -*******************************************************************************/ -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, u16 TIM_UpdateSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); - - if (TIM_UpdateSource != TIM_UpdateSource_Global) - { - /* Set the URS Bit */ - TIMx->CR1 |= CR1_URS_Set; - } - else - { - /* Reset the URS Bit */ - TIMx->CR1 &= CR1_URS_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectHallSensor -* Description : Enables or disables the TIMx’s Hall sensor interface. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. -* - NewState: new state of the TIMx Hall sensor interface. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Set the TI1S Bit */ - TIMx->CR2 |= CR2_TI1S_Set; - } - else - { - /* Reset the TI1S Bit */ - TIMx->CR2 &= CR2_TI1S_Reset; - } -} - -/******************************************************************************* -* Function Name : TIM_SelectOnePulseMode -* Description : Selects the TIMx’s One Pulse Mode. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_OPMode: specifies the OPM Mode to be used. -* This parameter can be one of the following values: -* - TIM_OPMode_Single -* - TIM_OPMode_Repetitive -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, u16 TIM_OPMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); - - /* Reset the OPM Bit */ - TIMx->CR1 &= CR1_OPM_Reset; - - /* Configure the OPM Mode */ - TIMx->CR1 |= TIM_OPMode; -} - -/******************************************************************************* -* Function Name : TIM_SelectOutputTrigger -* Description : Selects the TIMx Trigger Output Mode. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_TRGOSource: specifies the Trigger Output source. -* This paramter can be as follow: -* 1/ For TIM1 to TIM8: -* - TIM_TRGOSource_Reset -* - TIM_TRGOSource_Enable -* - TIM_TRGOSource_Update -* 2/ These parameters are available for all TIMx except -* TIM6 and TIM7: -* - TIM_TRGOSource_OC1 -* - TIM_TRGOSource_OC1Ref -* - TIM_TRGOSource_OC2Ref -* - TIM_TRGOSource_OC3Ref -* - TIM_TRGOSource_OC4Ref -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, u16 TIM_TRGOSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); - assert_param(IS_TIM_PERIPH_TRGO(TIMx, TIM_TRGOSource)); - - /* Reset the MMS Bits */ - TIMx->CR2 &= CR2_MMS_Mask; - - /* Select the TRGO source */ - TIMx->CR2 |= TIM_TRGOSource; -} - -/******************************************************************************* -* Function Name : TIM_SelectSlaveMode -* Description : Selects the TIMx Slave Mode. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_SlaveMode: specifies the Timer Slave Mode. -* This paramter can be one of the following values: -* - TIM_SlaveMode_Reset -* - TIM_SlaveMode_Gated -* - TIM_SlaveMode_Trigger -* - TIM_SlaveMode_External1 -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, u16 TIM_SlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); - - /* Reset the SMS Bits */ - TIMx->SMCR &= SMCR_SMS_Mask; - - /* Select the Slave Mode */ - TIMx->SMCR |= TIM_SlaveMode; -} - -/******************************************************************************* -* Function Name : TIM_SelectMasterSlaveMode -* Description : Sets or Resets the TIMx Master/Slave Mode. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. -* This paramter can be one of the following values: -* - TIM_MasterSlaveMode_Enable: synchronization between the -* current timer and its slaves (through TRGO). -* - TIM_MasterSlaveMode_Disable: No action -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, u16 TIM_MasterSlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); - - /* Reset the MSM Bit */ - TIMx->SMCR &= SMCR_MSM_Reset; - - /* Set or Reset the MSM Bit */ - TIMx->SMCR |= TIM_MasterSlaveMode; -} - -/******************************************************************************* -* Function Name : TIM_SetCounter -* Description : Sets the TIMx Counter Register value -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - Counter: specifies the Counter register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCounter(TIM_TypeDef* TIMx, u16 Counter) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Set the Counter Register value */ - TIMx->CNT = Counter; -} - -/******************************************************************************* -* Function Name : TIM_SetAutoreload -* Description : Sets the TIMx Autoreload Register value -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - Autoreload: specifies the Autoreload register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetAutoreload(TIM_TypeDef* TIMx, u16 Autoreload) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Set the Autoreload Register value */ - TIMx->ARR = Autoreload; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare1 -* Description : Sets the TIMx Capture Compare1 Register value -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare1: specifies the Capture Compare1 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare1(TIM_TypeDef* TIMx, u16 Compare1) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare1 Register value */ - TIMx->CCR1 = Compare1; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare2 -* Description : Sets the TIMx Capture Compare2 Register value -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare2: specifies the Capture Compare2 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare2(TIM_TypeDef* TIMx, u16 Compare2) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare2 Register value */ - TIMx->CCR2 = Compare2; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare3 -* Description : Sets the TIMx Capture Compare3 Register value -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare3: specifies the Capture Compare3 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare3(TIM_TypeDef* TIMx, u16 Compare3) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare3 Register value */ - TIMx->CCR3 = Compare3; -} - -/******************************************************************************* -* Function Name : TIM_SetCompare4 -* Description : Sets the TIMx Capture Compare4 Register value -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - Compare4: specifies the Capture Compare4 register new value. -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetCompare4(TIM_TypeDef* TIMx, u16 Compare4) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Set the Capture Compare4 Register value */ - TIMx->CCR4 = Compare4; -} - -/******************************************************************************* -* Function Name : TIM_SetIC1Prescaler -* Description : Sets the TIMx Input Capture 1 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture1 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC1PSC Bits */ - TIMx->CCMR1 &= CCMR_IC13PSC_Mask; - - /* Set the IC1PSC value */ - TIMx->CCMR1 |= TIM_ICPSC; -} - -/******************************************************************************* -* Function Name : TIM_SetIC2Prescaler -* Description : Sets the TIMx Input Capture 2 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture2 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC2PSC Bits */ - TIMx->CCMR1 &= CCMR_IC24PSC_Mask; - - /* Set the IC2PSC value */ - TIMx->CCMR1 |= (u16)(TIM_ICPSC << 8); -} - -/******************************************************************************* -* Function Name : TIM_SetIC3Prescaler -* Description : Sets the TIMx Input Capture 3 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture3 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC3PSC Bits */ - TIMx->CCMR2 &= CCMR_IC13PSC_Mask; - - /* Set the IC3PSC value */ - TIMx->CCMR2 |= TIM_ICPSC; -} - -/******************************************************************************* -* Function Name : TIM_SetIC4Prescaler -* Description : Sets the TIMx Input Capture 4 prescaler. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPSC: specifies the Input Capture4 prescaler -* new value. -* This parameter can be one of the following values: -* - TIM_ICPSC_DIV1: no prescaler -* - TIM_ICPSC_DIV2: capture is done once every 2 events -* - TIM_ICPSC_DIV4: capture is done once every 4 events -* - TIM_ICPSC_DIV8: capture is done once every 8 events -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, u16 TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - - /* Reset the IC4PSC Bits */ - TIMx->CCMR2 &= CCMR_IC24PSC_Mask; - - /* Set the IC4PSC value */ - TIMx->CCMR2 |= (u16)(TIM_ICPSC << 8); -} - -/******************************************************************************* -* Function Name : TIM_SetClockDivision -* Description : Sets the TIMx Clock Division value. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_CKD: specifies the clock division value. -* This parameter can be one of the following value: -* - TIM_CKD_DIV1: TDTS = Tck_tim -* - TIM_CKD_DIV2: TDTS = 2*Tck_tim -* - TIM_CKD_DIV4: TDTS = 4*Tck_tim -* Output : None -* Return : None -*******************************************************************************/ -void TIM_SetClockDivision(TIM_TypeDef* TIMx, u16 TIM_CKD) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CKD_DIV(TIM_CKD)); - - /* Reset the CKD Bits */ - TIMx->CR1 &= CR1_CKD_Mask; - - /* Set the CKD value */ - TIMx->CR1 |= TIM_CKD; -} -/******************************************************************************* -* Function Name : TIM_GetCapture1 -* Description : Gets the TIMx Input Capture 1 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 1 Register value. -*******************************************************************************/ -u16 TIM_GetCapture1(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 1 Register value */ - return TIMx->CCR1; -} - -/******************************************************************************* -* Function Name : TIM_GetCapture2 -* Description : Gets the TIMx Input Capture 2 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 2 Register value. -*******************************************************************************/ -u16 TIM_GetCapture2(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 2 Register value */ - return TIMx->CCR2; -} - -/******************************************************************************* -* Function Name : TIM_GetCapture3 -* Description : Gets the TIMx Input Capture 3 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 3 Register value. -*******************************************************************************/ -u16 TIM_GetCapture3(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 3 Register value */ - return TIMx->CCR3; -} - -/******************************************************************************* -* Function Name : TIM_GetCapture4 -* Description : Gets the TIMx Input Capture 4 value. -* Input : TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* Output : None -* Return : Capture Compare 4 Register value. -*******************************************************************************/ -u16 TIM_GetCapture4(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - - /* Get the Capture 4 Register value */ - return TIMx->CCR4; -} - -/******************************************************************************* -* Function Name : TIM_GetCounter -* Description : Gets the TIMx Counter value. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* Output : None -* Return : Counter Register value. -*******************************************************************************/ -u16 TIM_GetCounter(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Get the Counter Register value */ - return TIMx->CNT; -} - -/******************************************************************************* -* Function Name : TIM_GetPrescaler -* Description : Gets the TIMx Prescaler value. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* Output : None -* Return : Prescaler Register value. -*******************************************************************************/ -u16 TIM_GetPrescaler(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - /* Get the Prescaler Register value */ - return TIMx->PSC; -} - -/******************************************************************************* -* Function Name : TIM_GetFlagStatus -* Description : Checks whether the specified TIM flag is set or not. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - TIM_FLAG_Update: TIM update Flag -* - TIM_FLAG_CC1: TIM Capture Compare 1 Flag -* - TIM_FLAG_CC2: TIM Capture Compare 2 Flag -* - TIM_FLAG_CC3: TIM Capture Compare 3 Flag -* - TIM_FLAG_CC4: TIM Capture Compare 4 Flag -* - TIM_FLAG_COM: TIM Commutation Flag -* - TIM_FLAG_Trigger: TIM Trigger Flag -* - TIM_FLAG_Break: TIM Break Flag -* - TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag -* - TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag -* - TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag -* - TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag -* Output : None -* Return : The new state of TIM_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, u16 TIM_FLAG) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); - assert_param(IS_TIM_PERIPH_FLAG(TIMx, TIM_FLAG)); - - if ((TIMx->SR & TIM_FLAG) != (u16)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : TIM_ClearFlag -* Description : Clears the TIMx's pending flags. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_FLAG: specifies the flag bit to clear. -* This parameter can be any combination of the following values: -* - TIM_FLAG_Update: TIM update Flag -* - TIM_FLAG_CC1: TIM Capture Compare 1 Flag -* - TIM_FLAG_CC2: TIM Capture Compare 2 Flag -* - TIM_FLAG_CC3: TIM Capture Compare 3 Flag -* - TIM_FLAG_CC4: TIM Capture Compare 4 Flag -* - TIM_FLAG_COM: TIM Commutation Flag -* - TIM_FLAG_Trigger: TIM Trigger Flag -* - TIM_FLAG_Break: TIM Break Flag -* - TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag -* - TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag -* - TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag -* - TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearFlag(TIM_TypeDef* TIMx, u16 TIM_FLAG) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_CLEAR_FLAG(TIMx, TIM_FLAG)); - - /* Clear the flags */ - TIMx->SR = (u16)~TIM_FLAG; -} - -/******************************************************************************* -* Function Name : TIM_GetITStatus -* Description : Checks whether the TIM interrupt has occurred or not. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_IT: specifies the TIM interrupt source to check. -* This parameter can be one of the following values: -* - TIM_IT_Update: TIM update Interrupt source -* - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source -* - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source -* - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source -* - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source -* - TIM_IT_COM: TIM Commutation Interrupt -* source -* - TIM_IT_Trigger: TIM Trigger Interrupt source -* - TIM_IT_Break: TIM Break Interrupt source -* Output : None -* Return : The new state of the TIM_IT(SET or RESET). -*******************************************************************************/ -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, u16 TIM_IT) -{ - ITStatus bitstatus = RESET; - u16 itstatus = 0x0, itenable = 0x0; - - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_IT(TIM_IT)); - assert_param(IS_TIM_PERIPH_IT(TIMx, TIM_IT)); - - itstatus = TIMx->SR & TIM_IT; - - itenable = TIMx->DIER & TIM_IT; - - if ((itstatus != (u16)RESET) && (itenable != (u16)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : TIM_ClearITPendingBit -* Description : Clears the TIMx's interrupt pending bits. -* Input : - TIMx: where x can be 1 to 8 to select the TIM peripheral. -* - TIM_IT: specifies the pending bit to clear. -* This parameter can be any combination of the following values: -* - TIM_IT_Update: TIM1 update Interrupt source -* - TIM_IT_CC1: TIM Capture Compare 1 Interrupt source -* - TIM_IT_CC2: TIM Capture Compare 2 Interrupt source -* - TIM_IT_CC3: TIM Capture Compare 3 Interrupt source -* - TIM_IT_CC4: TIM Capture Compare 4 Interrupt source -* - TIM_IT_COM: TIM Commutation Interrupt -* source -* - TIM_IT_Trigger: TIM Trigger Interrupt source -* - TIM_IT_Break: TIM Break Interrupt source -* Output : None -* Return : None -*******************************************************************************/ -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, u16 TIM_IT) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PERIPH_IT(TIMx, TIM_IT)); - - /* Clear the IT pending Bit */ - TIMx->SR = (u16)~TIM_IT; -} - -/******************************************************************************* -* Function Name : TI1_Config -* Description : Configure the TI1 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 1 is selected to -* be connected to IC1. -* - TIM_ICSelection_IndirectTI: TIM Input 1 is selected to -* be connected to IC2. -* - TIM_ICSelection_TRC: TIM Input 1 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI1_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr1 = 0, tmpccer = 0; - - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= CCER_CC1E_Reset; - - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - - /* Select the Input and set the filter */ - tmpccmr1 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; - tmpccmr1 |= TIM_ICSelection | (u16)(TIM_ICFilter << 4); - - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= CCER_CC1P_Reset; - tmpccer |= TIM_ICPolarity | CCER_CC1E_Set; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TI2_Config -* Description : Configure the TI2 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 2 is selected to -* be connected to IC2. -* - TIM_ICSelection_IndirectTI: TIM Input 2 is selected to -* be connected to IC1. -* - TIM_ICSelection_TRC: TIM Input 2 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI2_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr1 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC2E_Reset; - - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - tmp = (u16)(TIM_ICPolarity << 4); - - /* Select the Input and set the filter */ - tmpccmr1 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; - tmpccmr1 |= (u16)(TIM_ICFilter << 12); - tmpccmr1 |= (u16)(TIM_ICSelection << 8); - - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= CCER_CC2P_Reset; - tmpccer |= tmp | CCER_CC2E_Set; - - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TI3_Config -* Description : Configure the TI3 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 3 is selected to -* be connected to IC3. -* - TIM_ICSelection_IndirectTI: TIM Input 3 is selected to -* be connected to IC4. -* - TIM_ICSelection_TRC: TIM Input 3 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI3_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= CCER_CC3E_Reset; - - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (u16)(TIM_ICPolarity << 8); - - /* Select the Input and set the filter */ - tmpccmr2 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; - tmpccmr2 |= TIM_ICSelection | (u16)(TIM_ICFilter << 4); - - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= CCER_CC3P_Reset; - tmpccer |= tmp | CCER_CC3E_Set; - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/******************************************************************************* -* Function Name : TI4_Config -* Description : Configure the TI1 as Input. -* Input : - TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM -* peripheral. -* - TIM_ICPolarity : The Input Polarity. -* This parameter can be one of the following values: -* - TIM_ICPolarity_Rising -* - TIM_ICPolarity_Falling -* - TIM_ICSelection: specifies the input to be used. -* This parameter can be one of the following values: -* - TIM_ICSelection_DirectTI: TIM Input 4 is selected to -* be connected to IC4. -* - TIM_ICSelection_IndirectTI: TIM Input 4 is selected to -* be connected to IC3. -* - TIM_ICSelection_TRC: TIM Input 4 is selected to be -* connected to TRC. -* - TIM_ICFilter: Specifies the Input Capture Filter. -* This parameter must be a value between 0x00 and 0x0F. -* Output : None -* Return : None -*******************************************************************************/ -static void TI4_Config(TIM_TypeDef* TIMx, u16 TIM_ICPolarity, u16 TIM_ICSelection, - u16 TIM_ICFilter) -{ - u16 tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= CCER_CC4E_Reset; - - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (u16)(TIM_ICPolarity << 12); - - /* Select the Input and set the filter */ - tmpccmr2 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; - tmpccmr2 |= (u16)(TIM_ICSelection << 8) | (u16)(TIM_ICFilter << 12); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= CCER_CC4P_Reset; - tmpccer |= tmp | CCER_CC4E_Set; - - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_usart.c b/bsp/stm32/library/src/stm32f10x_usart.c deleted file mode 100644 index c49c78fb3..000000000 --- a/bsp/stm32/library/src/stm32f10x_usart.c +++ /dev/null @@ -1,1001 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_usart.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the USART firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_usart.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* USART UE Mask */ -#define CR1_UE_Set ((u16)0x2000) /* USART Enable Mask */ -#define CR1_UE_Reset ((u16)0xDFFF) /* USART Disable Mask */ - -/* USART WakeUp Method */ -#define CR1_WAKE_Mask ((u16)0xF7FF) /* USART WakeUp Method Mask */ - -/* USART RWU Mask */ -#define CR1_RWU_Set ((u16)0x0002) /* USART mute mode Enable Mask */ -#define CR1_RWU_Reset ((u16)0xFFFD) /* USART mute mode Enable Mask */ - -#define CR1_SBK_Set ((u16)0x0001) /* USART Break Character send Mask */ - -#define CR1_CLEAR_Mask ((u16)0xE9F3) /* USART CR1 Mask */ - -#define CR2_Address_Mask ((u16)0xFFF0) /* USART address Mask */ - -/* USART LIN Mask */ -#define CR2_LINEN_Set ((u16)0x4000) /* USART LIN Enable Mask */ -#define CR2_LINEN_Reset ((u16)0xBFFF) /* USART LIN Disable Mask */ - -/* USART LIN Break detection */ -#define CR2_LBDL_Mask ((u16)0xFFDF) /* USART LIN Break detection Mask */ - -#define CR2_STOP_CLEAR_Mask ((u16)0xCFFF) /* USART CR2 STOP Bits Mask */ -#define CR2_CLOCK_CLEAR_Mask ((u16)0xF0FF) /* USART CR2 Clock Mask */ - -/* USART SC Mask */ -#define CR3_SCEN_Set ((u16)0x0020) /* USART SC Enable Mask */ -#define CR3_SCEN_Reset ((u16)0xFFDF) /* USART SC Disable Mask */ - -/* USART SC NACK Mask */ -#define CR3_NACK_Set ((u16)0x0010) /* USART SC NACK Enable Mask */ -#define CR3_NACK_Reset ((u16)0xFFEF) /* USART SC NACK Disable Mask */ - -/* USART Half-Duplex Mask */ -#define CR3_HDSEL_Set ((u16)0x0008) /* USART Half-Duplex Enable Mask */ -#define CR3_HDSEL_Reset ((u16)0xFFF7) /* USART Half-Duplex Disable Mask */ - -/* USART IrDA Mask */ -#define CR3_IRLP_Mask ((u16)0xFFFB) /* USART IrDA LowPower mode Mask */ - -#define CR3_CLEAR_Mask ((u16)0xFCFF) /* USART CR3 Mask */ - -/* USART IrDA Mask */ -#define CR3_IREN_Set ((u16)0x0002) /* USART IrDA Enable Mask */ -#define CR3_IREN_Reset ((u16)0xFFFD) /* USART IrDA Disable Mask */ - -#define GTPR_LSB_Mask ((u16)0x00FF) /* Guard Time Register LSB Mask */ -#define GTPR_MSB_Mask ((u16)0xFF00) /* Guard Time Register MSB Mask */ - -#define IT_Mask ((u16)0x001F) /* USART Interrupt Mask */ - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : USART_DeInit -* Description : Deinitializes the USARTx peripheral registers to their -* default reset values. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Output : None -* Return : None -*******************************************************************************/ -void USART_DeInit(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - switch (*(u32*)&USARTx) - { - case USART1_BASE: - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); - break; - - case USART2_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); - break; - - case USART3_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); - break; - - case UART4_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); - break; - - case UART5_BASE: - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); - break; - - default: - break; - } -} - -/******************************************************************************* -* Function Name : USART_Init -* Description : Initializes the USARTx peripheral according to the specified -* parameters in the USART_InitStruct . -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_InitStruct: pointer to a USART_InitTypeDef structure -* that contains the configuration information for the -* specified USART peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) -{ - u32 tmpreg = 0x00, apbclock = 0x00; - u32 integerdivider = 0x00; - u32 fractionaldivider = 0x00; - u32 usartxbase = 0; - RCC_ClocksTypeDef RCC_ClocksStatus; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); - assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); - assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); - assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); - assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); - assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); - /* The hardware flow control is available only for USART1, USART2 and USART3 */ - assert_param(IS_USART_PERIPH_HFC(USARTx, USART_InitStruct->USART_HardwareFlowControl)); - - usartxbase = (*(u32*)&USARTx); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear STOP[13:12] bits */ - tmpreg &= CR2_STOP_CLEAR_Mask; - - /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ - /* Set STOP[13:12] bits according to USART_StopBits value */ - tmpreg |= (u32)USART_InitStruct->USART_StopBits; - - /* Write to USART CR2 */ - USARTx->CR2 = (u16)tmpreg; - -/*---------------------------- USART CR1 Configuration -----------------------*/ - tmpreg = USARTx->CR1; - /* Clear M, PCE, PS, TE and RE bits */ - tmpreg &= CR1_CLEAR_Mask; - - /* Configure the USART Word Length, Parity and mode ----------------------- */ - /* Set the M bits according to USART_WordLength value */ - /* Set PCE and PS bits according to USART_Parity value */ - /* Set TE and RE bits according to USART_Mode value */ - tmpreg |= (u32)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | - USART_InitStruct->USART_Mode; - - /* Write to USART CR1 */ - USARTx->CR1 = (u16)tmpreg; - -/*---------------------------- USART CR3 Configuration -----------------------*/ - tmpreg = USARTx->CR3; - /* Clear CTSE and RTSE bits */ - tmpreg &= CR3_CLEAR_Mask; - - /* Configure the USART HFC -------------------------------------------------*/ - /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ - tmpreg |= USART_InitStruct->USART_HardwareFlowControl; - - /* Write to USART CR3 */ - USARTx->CR3 = (u16)tmpreg; - -/*---------------------------- USART BRR Configuration -----------------------*/ - /* Configure the USART Baud Rate -------------------------------------------*/ - RCC_GetClocksFreq(&RCC_ClocksStatus); - if (usartxbase == USART1_BASE) - { - apbclock = RCC_ClocksStatus.PCLK2_Frequency; - } - else - { - apbclock = RCC_ClocksStatus.PCLK1_Frequency; - } - - /* Determine the integer part */ - integerdivider = ((0x19 * apbclock) / (0x04 * (USART_InitStruct->USART_BaudRate))); - tmpreg = (integerdivider / 0x64) << 0x04; - - /* Determine the fractional part */ - fractionaldivider = integerdivider - (0x64 * (tmpreg >> 0x04)); - tmpreg |= ((((fractionaldivider * 0x10) + 0x32) / 0x64)) & ((u8)0x0F); - - /* Write to USART BRR */ - USARTx->BRR = (u16)tmpreg; -} - -/******************************************************************************* -* Function Name : USART_StructInit -* Description : Fills each USART_InitStruct member with its default value. -* Input : - USART_InitStruct: pointer to a USART_InitTypeDef structure -* which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void USART_StructInit(USART_InitTypeDef* USART_InitStruct) -{ - /* USART_InitStruct members default value */ - USART_InitStruct->USART_BaudRate = 9600; - USART_InitStruct->USART_WordLength = USART_WordLength_8b; - USART_InitStruct->USART_StopBits = USART_StopBits_1; - USART_InitStruct->USART_Parity = USART_Parity_No ; - USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; -} - -/******************************************************************************* -* Function Name : USART_ClockInit -* Description : Initializes the USARTx peripheral Clock according to the -* specified parameters in the USART_ClockInitStruct . -* Input : - USARTx: where x can be 1, 2, 3 to select the USART peripheral. -* Note: The Smart Card mode is not available for UART4 and UART5. -* - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef -* structure that contains the configuration information for -* the specified USART peripheral. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - u32 tmpreg = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); - assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); - assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); - assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear CLKEN, CPOL, CPHA and LBCL bits */ - tmpreg &= CR2_CLOCK_CLEAR_Mask; - - /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ - /* Set CLKEN bit according to USART_Clock value */ - /* Set CPOL bit according to USART_CPOL value */ - /* Set CPHA bit according to USART_CPHA value */ - /* Set LBCL bit according to USART_LastBit value */ - tmpreg |= (u32)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | - USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; - - /* Write to USART CR2 */ - USARTx->CR2 = (u16)tmpreg; -} - -/******************************************************************************* -* Function Name : USART_ClockStructInit -* Description : Fills each USART_ClockInitStruct member with its default value. -* Input : - USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef -* structure which will be initialized. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - /* USART_ClockInitStruct members default value */ - USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; - USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; - USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; - USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; -} - -/******************************************************************************* -* Function Name : USART_Cmd -* Description : Enables or disables the specified USART peripheral. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* : - NewState: new state of the USARTx peripheral. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected USART by setting the UE bit in the CR1 register */ - USARTx->CR1 |= CR1_UE_Set; - } - else - { - /* Disable the selected USART by clearing the UE bit in the CR1 register */ - USARTx->CR1 &= CR1_UE_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_ITConfig -* Description : Enables or disables the specified USART interrupts. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IT: specifies the USART interrupt sources to be -* enabled or disabled. -* This parameter can be one of the following values: -* - USART_IT_CTS: CTS change interrupt (not available for -* UART4 and UART5) -* - USART_IT_LBD: LIN Break detection interrupt -* - USART_IT_TXE: Tansmit Data Register empty interrupt -* - USART_IT_TC: Transmission complete interrupt -* - USART_IT_RXNE: Receive Data register not empty -* interrupt -* - USART_IT_IDLE: Idle line detection interrupt -* - USART_IT_PE: Parity Error interrupt -* - USART_IT_ERR: Error interrupt(Frame error, noise -* error, overrun error) -* - NewState: new state of the specified USARTx interrupts. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ITConfig(USART_TypeDef* USARTx, u16 USART_IT, FunctionalState NewState) -{ - u32 usartreg = 0x00, itpos = 0x00, itmask = 0x00; - u32 usartxbase = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CONFIG_IT(USART_IT)); - assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - usartxbase = (*(u32*)&(USARTx)); - - /* Get the USART register index */ - usartreg = (((u8)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itpos = USART_IT & IT_Mask; - - itmask = (((u32)0x01) << itpos); - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - usartxbase += 0x0C; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - usartxbase += 0x10; - } - else /* The IT is in CR3 register */ - { - usartxbase += 0x14; - } - if (NewState != DISABLE) - { - *(vu32*)usartxbase |= itmask; - } - else - { - *(vu32*)usartxbase &= ~itmask; - } -} - -/******************************************************************************* -* Function Name : USART_DMACmd -* Description : Enables or disables the USART’s DMA interface. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3 or UART4. -* Note: The DMA mode is not available for UART5. -* - USART_DMAReq: specifies the DMA request. -* This parameter can be any combination of the following values: -* - USART_DMAReq_Tx: USART DMA transmit request -* - USART_DMAReq_Rx: USART DMA receive request -* - NewState: new state of the DMA Request sources. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_DMACmd(USART_TypeDef* USARTx, u16 USART_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_1234_PERIPH(USARTx)); - assert_param(IS_USART_DMAREQ(USART_DMAReq)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA transfer for selected requests by setting the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 |= USART_DMAReq; - } - else - { - /* Disable the DMA transfer for selected requests by clearing the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 &= (u16)~USART_DMAReq; - } -} - -/******************************************************************************* -* Function Name : USART_SetAddress -* Description : Sets the address of the USART node. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_Address: Indicates the address of the USART node. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SetAddress(USART_TypeDef* USARTx, u8 USART_Address) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_ADDRESS(USART_Address)); - - /* Clear the USART address */ - USARTx->CR2 &= CR2_Address_Mask; - /* Set the USART address node */ - USARTx->CR2 |= USART_Address; -} - -/******************************************************************************* -* Function Name : USART_WakeUpConfig -* Description : Selects the USART WakeUp method. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_WakeUp: specifies the USART wakeup method. -* This parameter can be one of the following values: -* - USART_WakeUp_IdleLine: WakeUp by an idle line detection -* - USART_WakeUp_AddressMark: WakeUp by an address mark -* Output : None -* Return : None -*******************************************************************************/ -void USART_WakeUpConfig(USART_TypeDef* USARTx, u16 USART_WakeUp) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_WAKEUP(USART_WakeUp)); - - USARTx->CR1 &= CR1_WAKE_Mask; - USARTx->CR1 |= USART_WakeUp; -} - -/******************************************************************************* -* Function Name : USART_ReceiverWakeUpCmd -* Description : Determines if the USART is in mute mode or not. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the USART mute mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - USARTx->CR1 |= CR1_RWU_Set; - } - else - { - /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - USARTx->CR1 &= CR1_RWU_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_LINBreakDetectLengthConfig -* Description : Sets the USART LIN Break detection length. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_LINBreakDetectLength: specifies the LIN break -* detection length. -* This parameter can be one of the following values: -* - USART_LINBreakDetectLength_10b: 10-bit break detection -* - USART_LINBreakDetectLength_11b: 11-bit break detection -* Output : None -* Return : None -*******************************************************************************/ -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, u16 USART_LINBreakDetectLength) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); - - USARTx->CR2 &= CR2_LBDL_Mask; - USARTx->CR2 |= USART_LINBreakDetectLength; -} - -/******************************************************************************* -* Function Name : USART_LINCmd -* Description : Enables or disables the USART’s LIN mode. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the USART LIN mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - USARTx->CR2 |= CR2_LINEN_Set; - } - else - { - /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ - USARTx->CR2 &= CR2_LINEN_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_SendData -* Description : Transmits single data through the USARTx peripheral. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - Data: the data to transmit. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SendData(USART_TypeDef* USARTx, u16 Data) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DATA(Data)); - - /* Transmit Data */ - USARTx->DR = (Data & (u16)0x01FF); -} - -/******************************************************************************* -* Function Name : USART_ReceiveData -* Description : Returns the most recent received data by the USARTx peripheral. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Output : None -* Return : The received data. -*******************************************************************************/ -u16 USART_ReceiveData(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Receive Data */ - return (u16)(USARTx->DR & (u16)0x01FF); -} - -/******************************************************************************* -* Function Name : USART_SendBreak -* Description : Transmits break characters. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SendBreak(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Send break characters */ - USARTx->CR1 |= CR1_SBK_Set; -} - -/******************************************************************************* -* Function Name : USART_SetGuardTime -* Description : Sets the specified USART guard time. -* Input : - USARTx: where x can be 1, 2 or 3 to select the USART -* peripheral. -* Note: The guard time bits are not available for UART4 and UART5. -* - USART_GuardTime: specifies the guard time. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SetGuardTime(USART_TypeDef* USARTx, u8 USART_GuardTime) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - - /* Clear the USART Guard time */ - USARTx->GTPR &= GTPR_LSB_Mask; - /* Set the USART guard time */ - USARTx->GTPR |= (u16)((u16)USART_GuardTime << 0x08); -} - -/******************************************************************************* -* Function Name : USART_SetPrescaler -* Description : Sets the system clock prescaler. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* Note: The function is used for IrDA mode with UART4 and UART5. -* - USART_Prescaler: specifies the prescaler clock. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SetPrescaler(USART_TypeDef* USARTx, u8 USART_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Clear the USART prescaler */ - USARTx->GTPR &= GTPR_MSB_Mask; - /* Set the USART prescaler */ - USARTx->GTPR |= USART_Prescaler; -} - -/******************************************************************************* -* Function Name : USART_SmartCardCmd -* Description : Enables or disables the USART’s Smart Card mode. -* Input : - USARTx: where x can be 1, 2 or 3 to select the USART -* peripheral. -* Note: The Smart Card mode is not available for UART4 and UART5. -* - NewState: new state of the Smart Card mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the SC mode by setting the SCEN bit in the CR3 register */ - USARTx->CR3 |= CR3_SCEN_Set; - } - else - { - /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ - USARTx->CR3 &= CR3_SCEN_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_SmartCardNACKCmd -* Description : Enables or disables NACK transmission. -* Input : - USARTx: where x can be 1, 2 or 3 to select the USART -* peripheral. -* Note: The Smart Card mode is not available for UART4 and UART5. -* - NewState: new state of the NACK transmission. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ - USARTx->CR3 |= CR3_NACK_Set; - } - else - { - /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ - USARTx->CR3 &= CR3_NACK_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_HalfDuplexCmd -* Description : Enables or disables the USART’s Half Duplex communication. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the USART Communication. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - USARTx->CR3 |= CR3_HDSEL_Set; - } - else - { - /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ - USARTx->CR3 &= CR3_HDSEL_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_IrDAConfig -* Description : Configures the USART’s IrDA interface. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IrDAMode: specifies the IrDA mode. -* This parameter can be one of the following values: -* - USART_IrDAMode_LowPower -* - USART_IrDAMode_Normal -* Output : None -* Return : None -*******************************************************************************/ -void USART_IrDAConfig(USART_TypeDef* USARTx, u16 USART_IrDAMode) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); - - USARTx->CR3 &= CR3_IRLP_Mask; - USARTx->CR3 |= USART_IrDAMode; -} - -/******************************************************************************* -* Function Name : USART_IrDACmd -* Description : Enables or disables the USART’s IrDA interface. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - NewState: new state of the IrDA mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : None -*******************************************************************************/ -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ - USARTx->CR3 |= CR3_IREN_Set; - } - else - { - /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ - USARTx->CR3 &= CR3_IREN_Reset; - } -} - -/******************************************************************************* -* Function Name : USART_GetFlagStatus -* Description : Checks whether the specified USART flag is set or not. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_FLAG: specifies the flag to check. -* This parameter can be one of the following values: -* - USART_FLAG_CTS: CTS Change flag (not available for -* UART4 and UART5) -* - USART_FLAG_LBD: LIN Break detection flag -* - USART_FLAG_TXE: Transmit data register empty flag -* - USART_FLAG_TC: Transmission Complete flag -* - USART_FLAG_RXNE: Receive data register not empty flag -* - USART_FLAG_IDLE: Idle Line detection flag -* - USART_FLAG_ORE: OverRun Error flag -* - USART_FLAG_NE: Noise Error flag -* - USART_FLAG_FE: Framing Error flag -* - USART_FLAG_PE: Parity Error flag -* Output : None -* Return : The new state of USART_FLAG (SET or RESET). -*******************************************************************************/ -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, u16 USART_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_FLAG(USART_FLAG)); - assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ - - if ((USARTx->SR & USART_FLAG) != (u16)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/******************************************************************************* -* Function Name : USART_ClearFlag -* Description : Clears the USARTx's pending flags. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_FLAG: specifies the flag to clear. -* This parameter can be any combination of the following values: -* - USART_FLAG_CTS: CTS Change flag (not available for -* UART4 and UART5). -* - USART_FLAG_LBD: LIN Break detection flag. -* - USART_FLAG_TC: Transmission Complete flag. -* - USART_FLAG_RXNE: Receive data register not empty flag. -* -* Notes: -* - PE (Parity error), FE (Framing error), NE (Noise error), -* ORE (OverRun error) and IDLE (Idle line detected) -* flags are cleared by software sequence: a read -* operation to USART_SR register (USART_GetFlagStatus()) -* followed by a read operation to USART_DR register -* (USART_ReceiveData()). -* - RXNE flag can be also cleared by a read to the -* USART_DR register (USART_ReceiveData()). -* - TC flag can be also cleared by software sequence: a -* read operation to USART_SR register -* (USART_GetFlagStatus()) followed by a write operation -* to USART_DR register (USART_SendData()). -* - TXE flag is cleared only by a write to the USART_DR -* register (USART_SendData()). -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClearFlag(USART_TypeDef* USARTx, u16 USART_FLAG) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); - assert_param(IS_USART_PERIPH_FLAG(USARTx, USART_FLAG)); /* The CTS flag is not available for UART4 and UART5 */ - - USARTx->SR = (u16)~USART_FLAG; -} - -/******************************************************************************* -* Function Name : USART_GetITStatus -* Description : Checks whether the specified USART interrupt has occurred or not. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IT: specifies the USART interrupt source to check. -* This parameter can be one of the following values: -* - USART_IT_CTS: CTS change interrupt (not available for -* UART4 and UART5) -* - USART_IT_LBD: LIN Break detection interrupt -* - USART_IT_TXE: Tansmit Data Register empty interrupt -* - USART_IT_TC: Transmission complete interrupt -* - USART_IT_RXNE: Receive Data register not empty -* interrupt -* - USART_IT_IDLE: Idle line detection interrupt -* - USART_IT_ORE: OverRun Error interrupt -* - USART_IT_NE: Noise Error interrupt -* - USART_IT_FE: Framing Error interrupt -* - USART_IT_PE: Parity Error interrupt -* Output : None -* Return : The new state of USART_IT (SET or RESET). -*******************************************************************************/ -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, u16 USART_IT) -{ - u32 bitpos = 0x00, itmask = 0x00, usartreg = 0x00; - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_GET_IT(USART_IT)); - assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ - - /* Get the USART register index */ - usartreg = (((u8)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itmask = USART_IT & IT_Mask; - - itmask = (u32)0x01 << itmask; - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - itmask &= USARTx->CR1; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - itmask &= USARTx->CR2; - } - else /* The IT is in CR3 register */ - { - itmask &= USARTx->CR3; - } - - bitpos = USART_IT >> 0x08; - - bitpos = (u32)0x01 << bitpos; - bitpos &= USARTx->SR; - - if ((itmask != (u16)RESET)&&(bitpos != (u16)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - return bitstatus; -} - -/******************************************************************************* -* Function Name : USART_ClearITPendingBit -* Description : Clears the USARTx’s interrupt pending bits. -* Input : - USARTx: Select the USART or the UART peripheral. -* This parameter can be one of the following values: -* - USART1, USART2, USART3, UART4 or UART5. -* - USART_IT: specifies the interrupt pending bit to clear. -* This parameter can be one of the following values: -* - USART_IT_CTS: CTS change interrupt (not available for -* UART4 and UART5) -* - USART_IT_LBD: LIN Break detection interrupt -* - USART_IT_TC: Transmission complete interrupt. -* - USART_IT_RXNE: Receive Data register not empty interrupt. -* -* Notes: -* - PE (Parity error), FE (Framing error), NE (Noise error), -* ORE (OverRun error) and IDLE (Idle line detected) -* pending bits are cleared by software sequence: a read -* operation to USART_SR register (USART_GetITStatus()) -* followed by a read operation to USART_DR register -* (USART_ReceiveData()). -* - RXNE pending bit can be also cleared by a read to the -* USART_DR register (USART_ReceiveData()). -* - TC pending bit can be also cleared by software -* sequence: a read operation to USART_SR register -* (USART_GetITStatus()) followed by a write operation -* to USART_DR register (USART_SendData()). -* - TXE pending bit is cleared only by a write to the -* USART_DR register (USART_SendData()). -* Output : None -* Return : None -*******************************************************************************/ -void USART_ClearITPendingBit(USART_TypeDef* USARTx, u16 USART_IT) -{ - u16 bitpos = 0x00, itmask = 0x00; - - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_IT(USART_IT)); - assert_param(IS_USART_PERIPH_IT(USARTx, USART_IT)); /* The CTS interrupt is not available for UART4 and UART5 */ - - bitpos = USART_IT >> 0x08; - - itmask = (u16)((u16)0x01 << bitpos); - USARTx->SR = (u16)~itmask; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/library/src/stm32f10x_wwdg.c b/bsp/stm32/library/src/stm32f10x_wwdg.c deleted file mode 100644 index 7fe7f6486..000000000 --- a/bsp/stm32/library/src/stm32f10x_wwdg.c +++ /dev/null @@ -1,185 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_wwdg.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the WWDG firmware functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_wwdg.h" -#include "stm32f10x_rcc.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* ----------- WWDG registers bit address in the alias region ----------- */ -#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) - -/* Alias word address of EWI bit */ -#define CFR_OFFSET (WWDG_OFFSET + 0x04) -#define EWI_BitNumber 0x09 -#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) - -/* --------------------- WWDG registers bit mask ------------------------ */ -/* CR register bit mask */ -#define CR_WDGA_Set ((u32)0x00000080) - -/* CFR register bit mask */ -#define CFR_WDGTB_Mask ((u32)0xFFFFFE7F) -#define CFR_W_Mask ((u32)0xFFFFFF80) - -#define BIT_Mask ((u8)0x7F) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : WWDG_DeInit -* Description : Deinitializes the WWDG peripheral registers to their default -* reset values. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); -} - -/******************************************************************************* -* Function Name : WWDG_SetPrescaler -* Description : Sets the WWDG Prescaler. -* Input : - WWDG_Prescaler: specifies the WWDG Prescaler. -* This parameter can be one of the following values: -* - WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 -* - WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 -* - WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 -* - WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_SetPrescaler(u32 WWDG_Prescaler) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); - - /* Clear WDGTB[1:0] bits */ - tmpreg = WWDG->CFR & CFR_WDGTB_Mask; - - /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ - tmpreg |= WWDG_Prescaler; - - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/******************************************************************************* -* Function Name : WWDG_SetWindowValue -* Description : Sets the WWDG window value. -* Input : - WindowValue: specifies the window value to be compared to -* the downcounter. -* This parameter value must be lower than 0x80. -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_SetWindowValue(u8 WindowValue) -{ - u32 tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); - - /* Clear W[6:0] bits */ - tmpreg = WWDG->CFR & CFR_W_Mask; - - /* Set W[6:0] bits according to WindowValue value */ - tmpreg |= WindowValue & BIT_Mask; - - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/******************************************************************************* -* Function Name : WWDG_EnableIT -* Description : Enables the WWDG Early Wakeup interrupt(EWI). -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_EnableIT(void) -{ - *(vu32 *) CFR_EWI_BB = (u32)ENABLE; -} - -/******************************************************************************* -* Function Name : WWDG_SetCounter -* Description : Sets the WWDG counter value. -* Input : - Counter: specifies the watchdog counter value. -* This parameter must be a number between 0x40 and 0x7F. -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_SetCounter(u8 Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - - /* Write to T[6:0] bits to configure the counter value, no need to do - a read-modify-write; writing a 0 to WDGA bit does nothing */ - WWDG->CR = Counter & BIT_Mask; -} - -/******************************************************************************* -* Function Name : WWDG_Enable -* Description : Enables WWDG and load the counter value. -* - Counter: specifies the watchdog counter value. -* This parameter must be a number between 0x40 and 0x7F. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_Enable(u8 Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - - WWDG->CR = CR_WDGA_Set | Counter; -} - -/******************************************************************************* -* Function Name : WWDG_GetFlagStatus -* Description : Checks whether the Early Wakeup interrupt flag is set or not. -* Input : None -* Output : None -* Return : The new state of the Early Wakeup interrupt flag (SET or RESET) -*******************************************************************************/ -FlagStatus WWDG_GetFlagStatus(void) -{ - return (FlagStatus)(WWDG->SR); -} - -/******************************************************************************* -* Function Name : WWDG_ClearFlag -* Description : Clears Early Wakeup interrupt flag. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_ClearFlag(void) -{ - WWDG->SR = (u32)RESET; -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/project.Opt b/bsp/stm32/project.Opt deleted file mode 100644 index e0e5c73ff..000000000 --- a/bsp/stm32/project.Opt +++ /dev/null @@ -1,169 +0,0 @@ -### uVision2 Project, (C) Keil Software -### Do not modify ! - - cExt (*.c) - aExt (*.s*; *.src; *.a*) - oExt (*.obj) - lExt (*.lib) - tExt (*.txt; *.h; *.inc) - pExt (*.plm) - CppX (*.cpp) - DaveTm { 0,0,0,0,0,0,0,0 } - -Target (RT-Thread/STM32), 0x0004 // Tools: 'ARM-ADS' -GRPOPT 1,(Startup),0,0,0 -GRPOPT 2,(Library),0,0,0 -GRPOPT 3,(Kernel),0,0,0 -GRPOPT 4,(STM32),0,0,0 -GRPOPT 5,(finsh),0,0,0 -GRPOPT 6,(Filesystem),0,0,0 -GRPOPT 7,(LwIP),0,0,0 - -OPTFFF 1,1,1,1,0,0,0,0,<.\application.c> -OPTFFF 1,2,1,0,0,0,0,0,<.\board.c> -OPTFFF 1,3,1,0,0,0,0,0,<.\startup.c> -OPTFFF 1,4,2,0,0,0,0,0,<.\cortexm3_macro.s> -OPTFFF 1,5,1,184549376,0,0,0,0,<.\stm32f10x_it.c> -OPTFFF 1,6,5,0,0,0,0,0,<.\stm32f10x_conf.h> -OPTFFF 1,7,5,268435456,0,0,0,0,<.\rtconfig.h> -OPTFFF 1,8,1,0,0,0,0,0,<.\usart.c> -OPTFFF 1,9,1,0,0,0,0,0,<.\sdcard.c> -OPTFFF 1,10,1,0,0,0,0,0,<.\enc28j60.c> -OPTFFF 1,11,1,0,0,0,0,0,<.\rtc.c> -OPTFFF 2,12,1,0,0,0,0,0,<.\library\src\stm32f10x_adc.c> -OPTFFF 2,13,1,0,0,0,0,0,<.\library\src\stm32f10x_bkp.c> -OPTFFF 2,14,1,0,0,0,0,0,<.\library\src\stm32f10x_can.c> -OPTFFF 2,15,1,0,0,0,0,0,<.\library\src\stm32f10x_crc.c> -OPTFFF 2,16,1,0,0,0,0,0,<.\library\src\stm32f10x_dac.c> -OPTFFF 2,17,1,0,0,0,0,0,<.\library\src\stm32f10x_dbgmcu.c> -OPTFFF 2,18,1,0,0,0,0,0,<.\library\src\stm32f10x_dma.c> -OPTFFF 2,19,1,0,0,0,0,0,<.\library\src\stm32f10x_exti.c> -OPTFFF 2,20,1,0,0,0,0,0,<.\library\src\stm32f10x_flash.c> -OPTFFF 2,21,1,0,0,0,0,0,<.\library\src\stm32f10x_fsmc.c> -OPTFFF 2,22,1,0,0,0,0,0,<.\library\src\stm32f10x_gpio.c> -OPTFFF 2,23,1,0,0,0,0,0,<.\library\src\stm32f10x_i2c.c> -OPTFFF 2,24,1,0,0,0,0,0,<.\library\src\stm32f10x_iwdg.c> -OPTFFF 2,25,1,0,0,0,0,0,<.\library\src\stm32f10x_lib.c> -OPTFFF 2,26,1,0,0,0,0,0,<.\library\src\stm32f10x_nvic.c> -OPTFFF 2,27,1,0,0,0,0,0,<.\library\src\stm32f10x_pwr.c> -OPTFFF 2,28,1,0,0,0,0,0,<.\library\src\stm32f10x_rcc.c> -OPTFFF 2,29,1,0,0,0,0,0,<.\library\src\stm32f10x_rtc.c> -OPTFFF 2,30,1,0,0,0,0,0,<.\library\src\stm32f10x_sdio.c> -OPTFFF 2,31,1,0,0,0,0,0,<.\library\src\stm32f10x_spi.c> -OPTFFF 2,32,1,0,0,0,0,0,<.\library\src\stm32f10x_systick.c> -OPTFFF 2,33,1,0,0,0,0,0,<.\library\src\stm32f10x_tim.c> -OPTFFF 2,34,1,0,0,0,0,0,<.\library\src\stm32f10x_usart.c> -OPTFFF 2,35,1,0,0,0,0,0,<.\library\src\stm32f10x_wwdg.c> -OPTFFF 3,36,1,0,0,0,0,0,<..\..\src\clock.c> -OPTFFF 3,37,1,0,0,0,0,0,<..\..\src\idle.c> -OPTFFF 3,38,1,0,0,0,0,0,<..\..\src\ipc.c> -OPTFFF 3,39,1,16777216,0,0,0,0,<..\..\src\mem.c> -OPTFFF 3,40,1,0,0,0,0,0,<..\..\src\mempool.c> -OPTFFF 3,41,1,0,0,0,0,0,<..\..\src\object.c> -OPTFFF 3,42,1,0,0,0,0,0,<..\..\src\scheduler.c> -OPTFFF 3,43,1,0,0,0,0,0,<..\..\src\thread.c> -OPTFFF 3,44,1,0,0,0,0,0,<..\..\src\timer.c> -OPTFFF 3,45,1,0,0,0,0,0,<..\..\src\irq.c> -OPTFFF 3,46,1,33554432,0,0,0,0,<..\..\src\kservice.c> -OPTFFF 3,47,1,0,0,0,0,0,<..\..\src\device.c> -OPTFFF 3,48,1,0,0,0,0,0,<..\..\src\slab.c> -OPTFFF 4,49,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\stack.c> -OPTFFF 4,50,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\interrupt.c> -OPTFFF 4,51,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\cpu.c> -OPTFFF 4,52,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\serial.c> -OPTFFF 4,53,2,0,0,0,0,0,<..\..\libcpu\arm\stm32\context_rvds.S> -OPTFFF 4,54,2,0,0,0,0,0,<..\..\libcpu\arm\stm32\start_rvds.s> -OPTFFF 4,55,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\fault.c> -OPTFFF 4,56,2,0,0,0,0,0,<..\..\libcpu\arm\stm32\fault_rvds.S> -OPTFFF 5,57,1,0,0,0,0,0,<..\..\finsh\finsh_compiler.c> -OPTFFF 5,58,1,0,0,0,0,0,<..\..\finsh\finsh_error.c> -OPTFFF 5,59,1,0,0,0,0,0,<..\..\finsh\finsh_heap.c> -OPTFFF 5,60,1,0,0,0,0,0,<..\..\finsh\finsh_init.c> -OPTFFF 5,61,1,0,0,0,0,0,<..\..\finsh\finsh_node.c> -OPTFFF 5,62,1,0,0,0,0,0,<..\..\finsh\finsh_ops.c> -OPTFFF 5,63,1,0,0,0,0,0,<..\..\finsh\finsh_parser.c> -OPTFFF 5,64,1,0,0,0,0,0,<..\..\finsh\finsh_token.c> -OPTFFF 5,65,1,0,0,0,0,0,<..\..\finsh\finsh_var.c> -OPTFFF 5,66,1,0,0,0,0,0,<..\..\finsh\finsh_vm.c> -OPTFFF 5,67,1,0,0,0,0,0,<..\..\finsh\shell.c> -OPTFFF 5,68,1,0,0,0,0,0,<..\..\finsh\symbol.c> -OPTFFF 5,69,1,0,0,0,0,0,<..\..\finsh\cmd.c> -OPTFFF 6,70,1,0,0,0,0,0,<..\..\filesystem\dfs\src\dfs_init.c> -OPTFFF 6,71,1,0,0,0,0,0,<..\..\filesystem\dfs\src\dfs_fs.c> -OPTFFF 6,72,1,0,0,0,0,0,<..\..\filesystem\dfs\src\dfs_raw.c> -OPTFFF 6,73,1,0,0,0,0,0,<..\..\filesystem\dfs\src\dfs_util.c> -OPTFFF 6,74,1,0,0,0,0,0,<..\..\filesystem\dfs\src\dfs_cache.c> -OPTFFF 6,75,1,268435456,0,0,0,0,<..\..\filesystem\dfs\src\dfs_posix.c> -OPTFFF 6,76,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c> -OPTFFF 6,77,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c> -OPTFFF 6,78,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c> -OPTFFF 6,79,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c> -OPTFFF 6,80,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c> -OPTFFF 6,81,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c> -OPTFFF 6,82,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c> -OPTFFF 6,83,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c> -OPTFFF 6,84,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c> -OPTFFF 6,85,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c> -OPTFFF 6,86,1,0,0,0,0,0,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c> -OPTFFF 7,87,1,0,0,0,0,0,<..\..\net\lwip\src\core\dhcp.c> -OPTFFF 7,88,1,0,0,0,0,0,<..\..\net\lwip\src\core\dns.c> -OPTFFF 7,89,1,0,0,0,0,0,<..\..\net\lwip\src\core\init.c> -OPTFFF 7,90,1,0,0,0,0,0,<..\..\net\lwip\src\core\netif.c> -OPTFFF 7,91,1,0,0,0,0,0,<..\..\net\lwip\src\core\pbuf.c> -OPTFFF 7,92,1,0,0,0,0,0,<..\..\net\lwip\src\core\raw.c> -OPTFFF 7,93,1,0,0,0,0,0,<..\..\net\lwip\src\core\stats.c> -OPTFFF 7,94,1,0,0,0,0,0,<..\..\net\lwip\src\core\sys.c> -OPTFFF 7,95,1,301989888,0,0,0,0,<..\..\net\lwip\src\core\tcp.c> -OPTFFF 7,96,1,352321536,0,0,0,0,<..\..\net\lwip\src\core\tcp_in.c> -OPTFFF 7,97,1,0,0,0,0,0,<..\..\net\lwip\src\core\tcp_out.c> -OPTFFF 7,98,1,0,0,0,0,0,<..\..\net\lwip\src\core\udp.c> -OPTFFF 7,99,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\autoip.c> -OPTFFF 7,100,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\icmp.c> -OPTFFF 7,101,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\igmp.c> -OPTFFF 7,102,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\inet.c> -OPTFFF 7,103,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\inet_chksum.c> -OPTFFF 7,104,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\ip.c> -OPTFFF 7,105,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\ip_addr.c> -OPTFFF 7,106,1,0,0,0,0,0,<..\..\net\lwip\src\core\ipv4\ip_frag.c> -OPTFFF 7,107,1,0,0,0,0,0,<..\..\net\lwip\src\core\snmp\msg_in.c> -OPTFFF 7,108,1,0,0,0,0,0,<..\..\net\lwip\src\core\snmp\msg_out.c> -OPTFFF 7,109,1,0,0,0,0,0,<..\..\net\lwip\src\api\api_lib.c> -OPTFFF 7,110,1,0,0,0,0,0,<..\..\net\lwip\src\api\api_msg.c> -OPTFFF 7,111,1,0,0,0,0,0,<..\..\net\lwip\src\api\err.c> -OPTFFF 7,112,1,0,0,0,0,0,<..\..\net\lwip\src\api\netbuf.c> -OPTFFF 7,113,1,0,0,0,0,0,<..\..\net\lwip\src\api\netdb.c> -OPTFFF 7,114,1,0,0,0,0,0,<..\..\net\lwip\src\api\netifapi.c> -OPTFFF 7,115,1,0,0,0,0,0,<..\..\net\lwip\src\api\tcpip.c> -OPTFFF 7,116,1,0,0,0,0,0,<..\..\net\lwip\src\netif\etharp.c> -OPTFFF 7,117,1,0,0,0,0,0,<..\..\net\lwip\src\netif\ethernetif.c> -OPTFFF 7,118,1,0,0,0,0,0,<..\..\net\lwip\src\netif\loopif.c> -OPTFFF 7,119,1,0,0,0,0,0,<..\..\net\lwip\src\arch\sys_arch_init.c> -OPTFFF 7,120,1,0,0,0,0,0,<..\..\net\lwip\src\arch\sys_arch.c> -OPTFFF 7,121,1,0,0,0,0,0,<..\..\net\lwip\src\api\sockets.c> -OPTFFF 7,122,1,0,0,0,0,0,<..\..\net\lwip\src\core\memp_tiny.c> - - -TARGOPT 1, (RT-Thread/STM32) - ADSCLK=8000000 - OPTTT 1,1,1,0 - OPTHX 1,65535,0,0,0 - OPTLX 79,66,8,<.\obj\> - OPTOX 16 - OPTLT 1,1,1,0,1,1,0,1,0,0,0,0 - OPTXL 1,1,1,1,1,1,1,0,0 - OPTFL 1,0,1 - OPTAX 0 - OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE) - OPTDBG 48118,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()() - OPTKEY 0,(DLGUARM)((105=-1,-1,-1,-1,0)(106=-1,-1,-1,-1,0)(107=-1,-1,-1,-1,0)) - OPTKEY 0,(JL2CM3)(-U20090110 -O206 -S0 -C0 -JU1 -JI127.0.0.1 -JP0 -N00("ARM CoreSight SW-DP") -D00(3BA00477) -L00(0) -TO18 -TC10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000) - OPTKEY 0,(DLGTARM)((1010=477,119,843,669,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=-1,-1,-1,-1,0)(121=75,107,486,505,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(124=-1,-1,-1,-1,0)(125=-1,-1,-1,-1,0)(126=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=180,221,497,575,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)) - OPTKEY 0,(ARMDBGFLAGS)() - OPTKEY 0,(JLTAgdi)(-O1070 -J1 -Y1000 -Z1 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000) - OPTKEY 0,(JLTDLG)() - OPTMM 1,2,(0x2000629c) - OPTDF 0x84 - OPTLE <> - OPTLC <> -EndOpt - diff --git a/bsp/stm32/project.Uv2 b/bsp/stm32/project.Uv2 deleted file mode 100644 index ec491e876..000000000 --- a/bsp/stm32/project.Uv2 +++ /dev/null @@ -1,227 +0,0 @@ -### uVision2 Project, (C) Keil Software -### Do not modify ! - -Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS' - -Group (Startup) -Group (Library) -Group (Kernel) -Group (STM32) -Group (finsh) -Group (Filesystem) -Group (LwIP) - -File 1,1,<.\application.c> -File 1,1,<.\board.c> -File 1,1,<.\startup.c> -File 1,2,<.\cortexm3_macro.s> -File 1,1,<.\stm32f10x_it.c> -File 1,5,<.\stm32f10x_conf.h> -File 1,5,<.\rtconfig.h> -File 1,1,<.\usart.c> -File 1,1,<.\sdcard.c> -File 1,1,<.\enc28j60.c> -File 1,1,<.\rtc.c> -File 2,1,<.\library\src\stm32f10x_adc.c> -File 2,1,<.\library\src\stm32f10x_bkp.c> -File 2,1,<.\library\src\stm32f10x_can.c> -File 2,1,<.\library\src\stm32f10x_crc.c> -File 2,1,<.\library\src\stm32f10x_dac.c> -File 2,1,<.\library\src\stm32f10x_dbgmcu.c> -File 2,1,<.\library\src\stm32f10x_dma.c> -File 2,1,<.\library\src\stm32f10x_exti.c> -File 2,1,<.\library\src\stm32f10x_flash.c> -File 2,1,<.\library\src\stm32f10x_fsmc.c> -File 2,1,<.\library\src\stm32f10x_gpio.c> -File 2,1,<.\library\src\stm32f10x_i2c.c> -File 2,1,<.\library\src\stm32f10x_iwdg.c> -File 2,1,<.\library\src\stm32f10x_lib.c> -File 2,1,<.\library\src\stm32f10x_nvic.c> -File 2,1,<.\library\src\stm32f10x_pwr.c> -File 2,1,<.\library\src\stm32f10x_rcc.c> -File 2,1,<.\library\src\stm32f10x_rtc.c> -File 2,1,<.\library\src\stm32f10x_sdio.c> -File 2,1,<.\library\src\stm32f10x_spi.c> -File 2,1,<.\library\src\stm32f10x_systick.c> -File 2,1,<.\library\src\stm32f10x_tim.c> -File 2,1,<.\library\src\stm32f10x_usart.c> -File 2,1,<.\library\src\stm32f10x_wwdg.c> -File 3,1,<..\..\src\clock.c> -File 3,1,<..\..\src\idle.c> -File 3,1,<..\..\src\ipc.c> -File 3,1,<..\..\src\mem.c> -File 3,1,<..\..\src\mempool.c> -File 3,1,<..\..\src\object.c> -File 3,1,<..\..\src\scheduler.c> -File 3,1,<..\..\src\thread.c> -File 3,1,<..\..\src\timer.c> -File 3,1,<..\..\src\irq.c> -File 3,1,<..\..\src\kservice.c> -File 3,1,<..\..\src\device.c> -File 3,1,<..\..\src\slab.c> -File 4,1,<..\..\libcpu\arm\stm32\stack.c> -File 4,1,<..\..\libcpu\arm\stm32\interrupt.c> -File 4,1,<..\..\libcpu\arm\stm32\cpu.c> -File 4,1,<..\..\libcpu\arm\stm32\serial.c> -File 4,2,<..\..\libcpu\arm\stm32\context_rvds.S> -File 4,2,<..\..\libcpu\arm\stm32\start_rvds.s> -File 4,1,<..\..\libcpu\arm\stm32\fault.c> -File 4,2,<..\..\libcpu\arm\stm32\fault_rvds.S> -File 5,1,<..\..\finsh\finsh_compiler.c> -File 5,1,<..\..\finsh\finsh_error.c> -File 5,1,<..\..\finsh\finsh_heap.c> -File 5,1,<..\..\finsh\finsh_init.c> -File 5,1,<..\..\finsh\finsh_node.c> -File 5,1,<..\..\finsh\finsh_ops.c> -File 5,1,<..\..\finsh\finsh_parser.c> -File 5,1,<..\..\finsh\finsh_token.c> -File 5,1,<..\..\finsh\finsh_var.c> -File 5,1,<..\..\finsh\finsh_vm.c> -File 5,1,<..\..\finsh\shell.c> -File 5,1,<..\..\finsh\symbol.c> -File 5,1,<..\..\finsh\cmd.c> -File 6,1,<..\..\filesystem\dfs\src\dfs_init.c> -File 6,1,<..\..\filesystem\dfs\src\dfs_fs.c> -File 6,1,<..\..\filesystem\dfs\src\dfs_raw.c> -File 6,1,<..\..\filesystem\dfs\src\dfs_util.c> -File 6,1,<..\..\filesystem\dfs\src\dfs_cache.c> -File 6,1,<..\..\filesystem\dfs\src\dfs_posix.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c> -File 6,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c> -File 7,1,<..\..\net\lwip\src\core\dhcp.c> -File 7,1,<..\..\net\lwip\src\core\dns.c> -File 7,1,<..\..\net\lwip\src\core\init.c> -File 7,1,<..\..\net\lwip\src\core\netif.c> -File 7,1,<..\..\net\lwip\src\core\pbuf.c> -File 7,1,<..\..\net\lwip\src\core\raw.c> -File 7,1,<..\..\net\lwip\src\core\stats.c> -File 7,1,<..\..\net\lwip\src\core\sys.c> -File 7,1,<..\..\net\lwip\src\core\tcp.c> -File 7,1,<..\..\net\lwip\src\core\tcp_in.c> -File 7,1,<..\..\net\lwip\src\core\tcp_out.c> -File 7,1,<..\..\net\lwip\src\core\udp.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\autoip.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\icmp.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\igmp.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\inet.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\inet_chksum.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\ip.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\ip_addr.c> -File 7,1,<..\..\net\lwip\src\core\ipv4\ip_frag.c> -File 7,1,<..\..\net\lwip\src\core\snmp\msg_in.c> -File 7,1,<..\..\net\lwip\src\core\snmp\msg_out.c> -File 7,1,<..\..\net\lwip\src\api\api_lib.c> -File 7,1,<..\..\net\lwip\src\api\api_msg.c> -File 7,1,<..\..\net\lwip\src\api\err.c> -File 7,1,<..\..\net\lwip\src\api\netbuf.c> -File 7,1,<..\..\net\lwip\src\api\netdb.c> -File 7,1,<..\..\net\lwip\src\api\netifapi.c> -File 7,1,<..\..\net\lwip\src\api\tcpip.c> -File 7,1,<..\..\net\lwip\src\netif\etharp.c> -File 7,1,<..\..\net\lwip\src\netif\ethernetif.c> -File 7,1,<..\..\net\lwip\src\netif\loopif.c> -File 7,1,<..\..\net\lwip\src\arch\sys_arch_init.c> -File 7,1,<..\..\net\lwip\src\arch\sys_arch.c> -File 7,1,<..\..\net\lwip\src\api\sockets.c> -File 7,1,<..\..\net\lwip\src\core\memp_tiny.c> - - -Options 1,0,0 // Target 'RT-Thread STM32' - Device (STM32F103ZE) - Vendor (STMicroelectronics) - Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")) - FlashUt () - StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code")) - FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000)) - DevID (4216) - Rgf (stm32f10x_lib.h) - Mem () - C () - A () - RL () - OH () - DBC_IFX () - DBC_CMS () - DBC_AMS () - DBC_LMS () - UseEnv=0 - EnvBin () - EnvInc () - EnvLib () - EnvReg (˙ST\STM32F10x\) - OrgReg (˙ST\STM32F10x\) - TgStat=16 - OutDir (.\obj\) - OutName (rtthread-stm32) - GenApp=1 - GenLib=0 - GenHex=1 - Debug=1 - Browse=1 - LstDir (.\obj\) - HexSel=1 - MG32K=0 - TGMORE=0 - RunUsr 0 0 <> - RunUsr 1 0 <> - BrunUsr 0 0 <> - BrunUsr 1 0 <> - CrunUsr 0 0 <> - CrunUsr 1 0 <> - SVCSID <> - GLFLAGS=1790 - ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ACPUTYP ("Cortex-M3") - RVDEV () - ADSTFLGA { 0,12,0,2,99,0,1,66,0,0,0,0,0,0,0,0,0,0,0,0 } - OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - OCMADSIRAM { 0,0,0,0,32,0,0,1,0 } - OCMADSIROM { 1,0,0,0,8,0,0,8,0 } - OCMADSXRAM { 0,0,0,0,0,0,0,0,0 } - OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 } - RV_STAVEC () - ADSCCFLG { 5,0,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ADSCMISC () - ADSCDEFN () - ADSCUDEF () - ADSCINCD (.\library\inc;.\library\src;..\stm32;..\..\include;..\..\libcpu\arm\stm32;..\..\finsh;..\..\rtgui\include;..\..\filesystem\dfs;..\..\filesystem\dfs\include;..\..\net\lwip\src;..\..\net\lwip\src\include;..\..\net\lwip\src\arch\include;..\..\net\lwip\src\include\ipv4;..\..\filesystem\dfs\include;..\..\filesystem\dfs\filesystems\efsl\src\include;..\..\filesystem\dfs\filesystems\efsl\src\base\include;..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include) - ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ADSAMISC () - ADSADEFN () - ADSAUDEF () - ADSAINCD () - PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - IncBld=1 - AlwaysBuild=0 - GenAsm=0 - AsmAsm=0 - PublicsOnly=0 - StopCode=3 - CustArgs () - LibMods () - ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ADSLDTA (0x08000000) - ADSLDDA (0x20000000) - ADSLDSC () - ADSLDIB () - ADSLDIC () - ADSLDMC (--keep __fsym_* --keep __vsym_*) - ADSLDIF () - ADSLDDW () - OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE) - OPTDBG 48118,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()() - FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 } - FLASH2 (Segger\JL2CM3.dll) - FLASH3 ("" ()) - FLASH4 () -EndOpt - diff --git a/bsp/stm32/project.ewd b/bsp/stm32/project.ewd deleted file mode 100644 index 48f562856..000000000 --- a/bsp/stm32/project.ewd +++ /dev/null @@ -1,1299 +0,0 @@ - - - - 2 - - Debug - - ARM - - 1 - - C-SPY - 2 - - 18 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ARMSIM_ID - 2 - - 1 - 1 - 1 - - - - - - - - ANGEL_ID - 2 - - 0 - 1 - 1 - - - - - - - - - - - - GDBSERVER_ID - 2 - - 0 - 1 - 1 - - - - - - - - - - - IARROM_ID - 2 - - 0 - 1 - 1 - - - - - - - - - - JLINK_ID - 2 - - 10 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LMIFTDI_ID - 2 - - 1 - 1 - 1 - - - - - - - - MACRAIGOR_ID - 2 - - 3 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - RDI_ID - 2 - - 1 - 1 - 1 - - - - - - - - - - - - - - - - - STLINK_ID - 2 - - 0 - 1 - 1 - - - - - THIRDPARTY_ID - 2 - - 0 - 1 - 1 - - - - - - - - - $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin - 1 - - - - - Release - - ARM - - 0 - - C-SPY - 2 - - 18 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ARMSIM_ID - 2 - - 1 - 1 - 0 - - - - - - - - ANGEL_ID - 2 - - 0 - 1 - 0 - - - - - - - - - - - - GDBSERVER_ID - 2 - - 0 - 1 - 0 - - - - - - - - - - - IARROM_ID - 2 - - 0 - 1 - 0 - - - - - - - - - - JLINK_ID - 2 - - 10 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - LMIFTDI_ID - 2 - - 1 - 1 - 0 - - - - - - - - MACRAIGOR_ID - 2 - - 3 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - RDI_ID - 2 - - 1 - 1 - 0 - - - - - - - - - - - - - - - - - STLINK_ID - 2 - - 0 - 1 - 0 - - - - - THIRDPARTY_ID - 2 - - 0 - 1 - 0 - - - - - - - - - $TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin - 0 - - - $TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin - 0 - - - $EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin - 1 - - - $EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin - 1 - - - - - - diff --git a/bsp/stm32/project.ewp b/bsp/stm32/project.ewp deleted file mode 100644 index 274a87b87..000000000 --- a/bsp/stm32/project.ewp +++ /dev/null @@ -1,1805 +0,0 @@ - - - - 2 - - Debug - - ARM - - 1 - - General - 3 - - 17 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 21 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 7 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 7 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 17 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 21 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 7 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 7 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - - finsh - - $PROJ_DIR$\..\..\finsh\cmd.c - - - $PROJ_DIR$\..\..\finsh\finsh_compiler.c - - - $PROJ_DIR$\..\..\finsh\finsh_error.c - - - $PROJ_DIR$\..\..\finsh\finsh_heap.c - - - $PROJ_DIR$\..\..\finsh\finsh_init.c - - - $PROJ_DIR$\..\..\finsh\finsh_node.c - - - $PROJ_DIR$\..\..\finsh\finsh_ops.c - - - $PROJ_DIR$\..\..\finsh\finsh_parser.c - - - $PROJ_DIR$\..\..\finsh\finsh_token.c - - - $PROJ_DIR$\..\..\finsh\finsh_var.c - - - $PROJ_DIR$\..\..\finsh\finsh_vm.c - - - $PROJ_DIR$\..\..\finsh\shell.c - - - $PROJ_DIR$\..\..\finsh\symbol.c - - - - Kernel - - $PROJ_DIR$\..\..\src\clock.c - - - $PROJ_DIR$\..\..\src\device.c - - - $PROJ_DIR$\..\..\src\idle.c - - - $PROJ_DIR$\..\..\src\ipc.c - - - $PROJ_DIR$\..\..\src\irq.c - - - $PROJ_DIR$\..\..\src\kservice.c - - - $PROJ_DIR$\..\..\src\mem.c - - - $PROJ_DIR$\..\..\src\mempool.c - - - $PROJ_DIR$\..\..\src\object.c - - - $PROJ_DIR$\..\..\src\scheduler.c - - - $PROJ_DIR$\..\..\src\slab.c - - - $PROJ_DIR$\..\..\src\thread.c - - - $PROJ_DIR$\..\..\src\timer.c - - - - Library - - $PROJ_DIR$\library\src\stm32f10x_adc.c - - - $PROJ_DIR$\library\src\stm32f10x_bkp.c - - - $PROJ_DIR$\library\src\stm32f10x_can.c - - - $PROJ_DIR$\library\src\stm32f10x_crc.c - - - $PROJ_DIR$\library\src\stm32f10x_dac.c - - - $PROJ_DIR$\library\src\stm32f10x_dbgmcu.c - - - $PROJ_DIR$\library\src\stm32f10x_dma.c - - - $PROJ_DIR$\library\src\stm32f10x_exti.c - - - $PROJ_DIR$\library\src\stm32f10x_flash.c - - - $PROJ_DIR$\library\src\stm32f10x_fsmc.c - - - $PROJ_DIR$\library\src\stm32f10x_gpio.c - - - $PROJ_DIR$\library\src\stm32f10x_i2c.c - - - $PROJ_DIR$\library\src\stm32f10x_iwdg.c - - - $PROJ_DIR$\library\src\stm32f10x_lib.c - - - $PROJ_DIR$\library\src\stm32f10x_nvic.c - - - $PROJ_DIR$\library\src\stm32f10x_pwr.c - - - $PROJ_DIR$\library\src\stm32f10x_rcc.c - - - $PROJ_DIR$\library\src\stm32f10x_rtc.c - - - $PROJ_DIR$\library\src\stm32f10x_sdio.c - - - $PROJ_DIR$\library\src\stm32f10x_spi.c - - - $PROJ_DIR$\library\src\stm32f10x_systick.c - - - $PROJ_DIR$\library\src\stm32f10x_tim.c - - - $PROJ_DIR$\library\src\stm32f10x_usart.c - - - $PROJ_DIR$\library\src\stm32f10x_wwdg.c - - - - Startup - - $PROJ_DIR$\application.c - - - $PROJ_DIR$\board.c - - - $PROJ_DIR$\rtconfig.h - - - $PROJ_DIR$\sdcard.c - - - $PROJ_DIR$\startup.c - - - $PROJ_DIR$\stm32f10x_it.c - - - $PROJ_DIR$\usart.c - - - - STM32 - - $PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S - - - $PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c - - - $PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c - - - $PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c - - - $PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c - - - $PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.c - - - - - diff --git a/bsp/stm32/project.eww b/bsp/stm32/project.eww deleted file mode 100644 index c2cb02eb1..000000000 --- a/bsp/stm32/project.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\project.ewp - - - - - diff --git a/bsp/stm32/rtc.c b/bsp/stm32/rtc.c deleted file mode 100644 index 30adb4cf7..000000000 --- a/bsp/stm32/rtc.c +++ /dev/null @@ -1,217 +0,0 @@ -#include -#include "stm32f10x_lib.h" - -static struct rt_device rtc; -static rt_err_t rt_rtc_open(rt_device_t dev, rt_uint16_t oflag) -{ - if (dev->rx_indicate != RT_NULL) - { - /* Open Interrupt */ - } - - return RT_EOK; -} - -static rt_size_t rt_rtc_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) -{ - return 0; -} - -static rt_err_t rt_rtc_control(rt_device_t dev, rt_uint8_t cmd, void *args) -{ - rt_time_t *time; - RT_ASSERT(dev != RT_NULL); - - switch (cmd) - { - case RT_DEVICE_CTRL_RTC_GET_TIME: - time = (rt_time_t *)args; - /* read device */ - *time = RTC_GetCounter(); - break; - - case RT_DEVICE_CTRL_RTC_SET_TIME: - { - time = (rt_time_t *)args; - - /* Enable PWR and BKP clocks */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE); - - /* Allow access to BKP Domain */ - PWR_BackupAccessCmd(ENABLE); - - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - - /* Change the current time */ - RTC_SetCounter(*time); - - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - - BKP_WriteBackupRegister(BKP_DR1, 0xA5A5); - } - break; - } - - return RT_EOK; -} - -/******************************************************************************* -* Function Name : RTC_Configuration -* Description : Configures the RTC. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_Configuration(void) -{ - /* Enable PWR and BKP clocks */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE); - - /* Allow access to BKP Domain */ - PWR_BackupAccessCmd(ENABLE); - - /* Reset Backup Domain */ - BKP_DeInit(); - - /* Enable LSE */ - RCC_LSEConfig(RCC_LSE_ON); - /* Wait till LSE is ready */ - while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET) - { - } - - /* Select LSE as RTC Clock Source */ - RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE); - - /* Enable RTC Clock */ - RCC_RTCCLKCmd(ENABLE); - - /* Wait for RTC registers synchronization */ - RTC_WaitForSynchro(); - - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - - /* Set RTC prescaler: set RTC period to 1sec */ - RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) */ - - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); -} - -void rt_hw_rtc_init(void) -{ - rtc.type = RT_Device_Class_RTC; - - if (BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5) - { - rt_kprintf("rtc is not configured\n"); - rt_kprintf("please configure with set_date and set_time\n"); - RTC_Configuration(); - } - else - { - /* Wait for RTC registers synchronization */ - RTC_WaitForSynchro(); - } - - /* register rtc device */ - rtc.init = RT_NULL; - rtc.open = rt_rtc_open; - rtc.close = RT_NULL; - rtc.read = rt_rtc_read; - rtc.write = RT_NULL; - rtc.control = rt_rtc_control; - - /* no private */ - rtc.private = RT_NULL; - - rt_device_register(&rtc, "rtc", RT_DEVICE_FLAG_RDWR); - - return; -} - -#ifdef RT_USING_FINSH -#include -#include -time_t time(time_t* t) -{ - rt_device_t device; - time_t time; - - device = rt_device_find("rtc"); - if (device != RT_NULL) - { - rt_device_control(device, RT_DEVICE_CTRL_RTC_GET_TIME, &time); - if (t != RT_NULL) *t = time; - } - - return time; -} - -void set_date(rt_uint32_t year, rt_uint32_t month, rt_uint32_t day) -{ - time_t now; - struct tm* ti; - rt_device_t device; - - ti = RT_NULL; - /* get current time */ - time(&now); - - ti = localtime(&now); - if (ti != RT_NULL) - { - ti->tm_year = year - 1900; - ti->tm_mon = month; - ti->tm_mday = day; - } - - now = mktime(ti); - - device = rt_device_find("rtc"); - if (device != RT_NULL) - { - rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now); - } -} -FINSH_FUNCTION_EXPORT(set_date, set date) - -void set_time(rt_uint32_t hour, rt_uint32_t minute, rt_uint32_t second) -{ - time_t now; - struct tm* ti; - rt_device_t device; - - ti = RT_NULL; - /* get current time */ - time(&now); - - ti = localtime(&now); - if (ti != RT_NULL) - { - ti->tm_hour = hour; - ti->tm_min = minute; - ti->tm_sec = second; - } - - now = mktime(ti); - device = rt_device_find("rtc"); - if (device != RT_NULL) - { - rt_rtc_control(device, RT_DEVICE_CTRL_RTC_SET_TIME, &now); - } -} -FINSH_FUNCTION_EXPORT(set_time, set second) - -void list_date() -{ - time_t now; - - time(&now); - rt_kprintf("%s\n", ctime(&now)); -} -FINSH_FUNCTION_EXPORT(list_date, set date) -#endif diff --git a/bsp/stm32/rtc.h b/bsp/stm32/rtc.h deleted file mode 100644 index 29154aef9..000000000 --- a/bsp/stm32/rtc.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __RTC_H__ -#define __RTC_H__ - -void rt_hw_rtc_init(void); - -#endif diff --git a/bsp/stm32/rtconfig.h b/bsp/stm32/rtconfig.h deleted file mode 100644 index d66ff6fa5..000000000 --- a/bsp/stm32/rtconfig.h +++ /dev/null @@ -1,157 +0,0 @@ -/* RT-Thread config file */ -#ifndef __RTTHREAD_CFG_H__ -#define __RTTHREAD_CFG_H__ - -/* RT_NAME_MAX*/ -#define RT_NAME_MAX 8 - -/* RT_ALIGN_SIZE*/ -#define RT_ALIGN_SIZE 4 - -/* PRIORITY_MAX*/ -#define RT_THREAD_PRIORITY_MAX 256 - -/* Tick per Second*/ -#define RT_TICK_PER_SECOND 100 - -/* SECTION: RT_DEBUG */ -/* Thread Debug*/ -#define RT_DEBUG -#define RT_THREAD_DEBUG - -#define RT_USING_OVERFLOW_CHECK - -/* Using Hook*/ -#define RT_USING_HOOK - -/* SECTION: IPC */ -/* Using Semaphore*/ -#define RT_USING_SEMAPHORE - -/* Using Mutex*/ -#define RT_USING_MUTEX - -/* Using Event*/ -#define RT_USING_EVENT - -/* Using Faset Event*/ -/* #define RT_USING_FASTEVENT */ - -/* Using MailBox*/ -#define RT_USING_MAILBOX - -/* Using Message Queue*/ -#define RT_USING_MESSAGEQUEUE - -/* SECTION: Memory Management */ -/* Using Memory Pool Management*/ -#define RT_USING_MEMPOOL - -/* Using Dynamic Heap Management*/ -#define RT_USING_HEAP - -/* Using Small MM*/ -#define RT_USING_SMALL_MEM - -/* Using SLAB Allocator*/ -/* #define RT_USING_SLAB */ - -/* SECTION: Device System */ -/* Using Device System*/ -#define RT_USING_DEVICE -#define RT_USING_UART1 -// #define RT_USING_UART2 -// #define RT_USING_UART3 - -/* SECTION: Console options */ -/* the buffer size of console*/ -#define RT_CONSOLEBUF_SIZE 128 - -/* SECTION: FinSH shell options */ -/* Using FinSH as Shell*/ -#define RT_USING_FINSH -/* Using symbol table */ -#define FINSH_USING_SYMTAB -#define FINSH_USING_DESCRIPTION - -/* SECTION: a mini libc */ -/* Using mini libc library*/ -/* #define RT_USING_MINILIBC */ - -/* SECTION: C++ support */ -/* Using C++ support*/ -/* #define RT_USING_CPLUSPLUS */ - -/* #define RT_USING_RTGUI */ - -#define RT_USING_DFS -/* SECTION: DFS options */ -/* the max number of mounted filesystem */ -#define DFS_FILESYSTEMS_MAX 2 -/* the max number of opened files */ -#define DFS_FD_MAX 8 -/* the max number of cached sector */ -#define DFS_CACHE_MAX_NUM 8 - -/* SECTION: lwip, a lighwight TCP/IP protocol stack */ -/* Using lighweight TCP/IP protocol stack*/ -#define RT_USING_LWIP - -/* Trace LwIP protocol*/ -/* #define RT_LWIP_DEBUG */ - -/* Enable ICMP protocol*/ -#define RT_LWIP_ICMP - -/* Enable IGMP protocol*/ -/* #define RT_LWIP_IGMP */ - -/* Enable UDP protocol*/ -#define RT_LWIP_UDP - -/* Enable TCP protocol*/ -#define RT_LWIP_TCP - -/* the number of simulatenously active TCP connections*/ -#define RT_LWIP_TCP_PCB_NUM 5 - -/* TCP sender buffer space*/ -#define RT_LWIP_TCP_SND_BUF 1500 - -/* Enable SNMP protocol*/ -/* #define RT_LWIP_SNMP */ - -/* Using DHCP*/ -/* #define RT_LWIP_DHCP */ - -#define RT_LWIP_DNS - -/* ip address of target*/ -#define RT_LWIP_IPADDR0 192 -#define RT_LWIP_IPADDR1 168 -#define RT_LWIP_IPADDR2 1 -#define RT_LWIP_IPADDR3 30 - -/* gateway address of target*/ -#define RT_LWIP_GWADDR0 192 -#define RT_LWIP_GWADDR1 168 -#define RT_LWIP_GWADDR2 1 -#define RT_LWIP_GWADDR3 1 - -/* mask address of target*/ -#define RT_LWIP_MSKADDR0 255 -#define RT_LWIP_MSKADDR1 255 -#define RT_LWIP_MSKADDR2 255 -#define RT_LWIP_MSKADDR3 0 - -/* tcp thread options */ -#define RT_LWIP_TCPTHREAD_PRIORITY 120 -#define RT_LWIP_TCPTHREAD_MBOX_SIZE 4 -#define RT_LWIP_TCPTHREAD_STACKSIZE 1024 - -/* ethernet if thread options */ -#define RT_LWIP_ETHTHREAD_PRIORITY 128 -#define RT_LWIP_ETHTHREAD_MBOX_SIZE 4 -#define RT_LWIP_ETHTHREAD_STACKSIZE 512 - -#endif diff --git a/bsp/stm32/sdcard.c b/bsp/stm32/sdcard.c deleted file mode 100644 index df1442c8c..000000000 --- a/bsp/stm32/sdcard.c +++ /dev/null @@ -1,3108 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : sdcard.c -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file provides all the SD Card driver firmware -* functions. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "sdcard.h" - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -#define NULL 0 -#define SDIO_STATIC_FLAGS ((u32)0x000005FF) -#define SDIO_CMD0TIMEOUT ((u32)0x00002710) -#define SDIO_FIFO_Address ((u32)0x40018080) - -/* Mask for errors Card Status R1 (OCR Register) */ -#define SD_OCR_ADDR_OUT_OF_RANGE ((u32)0x80000000) -#define SD_OCR_ADDR_MISALIGNED ((u32)0x40000000) -#define SD_OCR_BLOCK_LEN_ERR ((u32)0x20000000) -#define SD_OCR_ERASE_SEQ_ERR ((u32)0x10000000) -#define SD_OCR_BAD_ERASE_PARAM ((u32)0x08000000) -#define SD_OCR_WRITE_PROT_VIOLATION ((u32)0x04000000) -#define SD_OCR_LOCK_UNLOCK_FAILED ((u32)0x01000000) -#define SD_OCR_COM_CRC_FAILED ((u32)0x00800000) -#define SD_OCR_ILLEGAL_CMD ((u32)0x00400000) -#define SD_OCR_CARD_ECC_FAILED ((u32)0x00200000) -#define SD_OCR_CC_ERROR ((u32)0x00100000) -#define SD_OCR_GENERAL_UNKNOWN_ERROR ((u32)0x00080000) -#define SD_OCR_STREAM_READ_UNDERRUN ((u32)0x00040000) -#define SD_OCR_STREAM_WRITE_OVERRUN ((u32)0x00020000) -#define SD_OCR_CID_CSD_OVERWRIETE ((u32)0x00010000) -#define SD_OCR_WP_ERASE_SKIP ((u32)0x00008000) -#define SD_OCR_CARD_ECC_DISABLED ((u32)0x00004000) -#define SD_OCR_ERASE_RESET ((u32)0x00002000) -#define SD_OCR_AKE_SEQ_ERROR ((u32)0x00000008) -#define SD_OCR_ERRORBITS ((u32)0xFDFFE008) - -/* Masks for R6 Response */ -#define SD_R6_GENERAL_UNKNOWN_ERROR ((u32)0x00002000) -#define SD_R6_ILLEGAL_CMD ((u32)0x00004000) -#define SD_R6_COM_CRC_FAILED ((u32)0x00008000) - -#define SD_VOLTAGE_WINDOW_SD ((u32)0x80100000) -#define SD_HIGH_CAPACITY ((u32)0x40000000) -#define SD_STD_CAPACITY ((u32)0x00000000) -#define SD_CHECK_PATTERN ((u32)0x000001AA) - -#define SD_MAX_VOLT_TRIAL ((u32)0x0000FFFF) -#define SD_ALLZERO ((u32)0x00000000) - -#define SD_WIDE_BUS_SUPPORT ((u32)0x00040000) -#define SD_SINGLE_BUS_SUPPORT ((u32)0x00010000) -#define SD_CARD_LOCKED ((u32)0x02000000) -#define SD_CARD_PROGRAMMING ((u32)0x00000007) -#define SD_CARD_RECEIVING ((u32)0x00000006) -#define SD_DATATIMEOUT ((u32)0x000FFFFF) -#define SD_0TO7BITS ((u32)0x000000FF) -#define SD_8TO15BITS ((u32)0x0000FF00) -#define SD_16TO23BITS ((u32)0x00FF0000) -#define SD_24TO31BITS ((u32)0xFF000000) -#define SD_MAX_DATA_LENGTH ((u32)0x01FFFFFF) - -#define SD_HALFFIFO ((u32)0x00000008) -#define SD_HALFFIFOBYTES ((u32)0x00000020) - -/* Command Class Supported */ -#define SD_CCCC_LOCK_UNLOCK ((u32)0x00000080) -#define SD_CCCC_WRITE_PROT ((u32)0x00000040) -#define SD_CCCC_ERASE ((u32)0x00000020) - -/* Following commands are SD Card Specific commands. - SDIO_APP_CMD should be sent before sending these commands. */ -#define SDIO_SEND_IF_COND ((u32)0x00000008) - -#define SDIO_INIT_CLK_DIV ((u8)0xB2) -#define SDIO_TRANSFER_CLK_DIV ((u8)0x1) - -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -static u32 CardType = SDIO_STD_CAPACITY_SD_CARD_V1_1; -static u32 CSD_Tab[4], CID_Tab[4], RCA = 0; -static u32 DeviceMode = SD_DMA_MODE; -static u32 TotalNumberOfBytes = 0, StopCondition = 0; -u32 *SrcBuffer, *DestBuffer; -volatile SD_Error TransferError = SD_OK; -vu32 TransferEnd = 0; -vu32 NumberOfBytes = 0; -SDIO_InitTypeDef SDIO_InitStructure; -SDIO_CmdInitTypeDef SDIO_CmdInitStructure; -SDIO_DataInitTypeDef SDIO_DataInitStructure; - -/* Private function prototypes -----------------------------------------------*/ -static SD_Error CmdError(void); -static SD_Error CmdResp1Error(u8 cmd); -static SD_Error CmdResp7Error(void); -static SD_Error CmdResp3Error(void); -static SD_Error CmdResp2Error(void); -static SD_Error CmdResp6Error(u8 cmd, u16 *prca); -static SD_Error SDEnWideBus(FunctionalState NewState); -static SD_Error IsCardProgramming(u8 *pstatus); -static SD_Error FindSCR(u16 rca, u32 *pscr); -static u8 convert_from_bytes_to_power_of_two(u16 NumberOfBytes); -static void GPIO_Configuration(void); -static void DMA_TxConfiguration(u32 *BufferSRC, u32 BufferSize); -static void DMA_RxConfiguration(u32 *BufferDST, u32 BufferSize); - -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************* -* Function Name : SD_Init -* Description : Initializes the SD Card and put it into StandBy State (Ready -* for data transfer). -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_Init(void) -{ - SD_Error errorstatus = SD_OK; - - /* Configure SDIO interface GPIO */ - GPIO_Configuration(); - - /* Enable the SDIO AHB Clock */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_SDIO, ENABLE); - - /* Enable the DMA2 Clock */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA2, ENABLE); - - SDIO_DeInit(); - - errorstatus = SD_PowerON(); - - if (errorstatus != SD_OK) - { - /* CMD Response TimeOut (wait for CMDSENT flag) */ - return(errorstatus); - } - - errorstatus = SD_InitializeCards(); - - if (errorstatus != SD_OK) - { - /* CMD Response TimeOut (wait for CMDSENT flag) */ - return(errorstatus); - } - - /* Configure the SDIO peripheral */ - /* HCLK = 72 MHz, SDIOCLK = 72 MHz, SDIO_CK = HCLK/(2 + 1) = 24 MHz */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_TRANSFER_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_PowerON -* Description : Enquires cards about their operating voltage and configures -* clock controls. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_PowerON(void) -{ - SD_Error errorstatus = SD_OK; - u32 response = 0, count = 0; - bool validvoltage = FALSE; - u32 SDType = SD_STD_CAPACITY; - - /* Power ON Sequence -------------------------------------------------------*/ - /* Configure the SDIO peripheral */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_INIT_CLK_DIV; /* HCLK = 72MHz, SDIOCLK = 72MHz, SDIO_CK = HCLK/(178 + 2) = 400 KHz */ - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - - /* Set Power State to ON */ - SDIO_SetPowerState(SDIO_PowerState_ON); - - /* Enable SDIO Clock */ - SDIO_ClockCmd(ENABLE); - - /* CMD0: GO_IDLE_STATE -------------------------------------------------------*/ - /* No CMD response required */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_GO_IDLE_STATE; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_No; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdError(); - - if (errorstatus != SD_OK) - { - /* CMD Response TimeOut (wait for CMDSENT flag) */ - return(errorstatus); - } - - /* CMD8: SEND_IF_COND --------------------------------------------------------*/ - /* Send CMD8 to verify SD card interface operating condition */ - /* Argument: - [31:12]: Reserved (shall be set to '0') - - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V) - - [7:0]: Check Pattern (recommended 0xAA) */ - /* CMD Response: R7 */ - SDIO_CmdInitStructure.SDIO_Argument = SD_CHECK_PATTERN; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_IF_COND; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp7Error(); - - if (errorstatus == SD_OK) - { - CardType = SDIO_STD_CAPACITY_SD_CARD_V2_0; /* SD Card 2.0 */ - SDType = SD_HIGH_CAPACITY; - } - else - { - /* CMD55 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SDIO_APP_CMD); - } - /* CMD55 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - /* If errorstatus is Command TimeOut, it is a MMC card */ - /* If errorstatus is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch) - or SD card 1.x */ - if (errorstatus == SD_OK) - { - /* SD CARD */ - /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */ - while ((!validvoltage) && (count < SD_MAX_VOLT_TRIAL)) - { - - /* SEND CMD55 APP_CMD with RCA as 0 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - SDIO_CmdInitStructure.SDIO_Argument = SD_VOLTAGE_WINDOW_SD | SDType; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SD_APP_OP_COND; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp3Error(); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - response = SDIO_GetResponse(SDIO_RESP1); - validvoltage = (bool) (((response >> 31) == 1) ? 1 : 0); - count++; - } - if (count >= SD_MAX_VOLT_TRIAL) - { - errorstatus = SD_INVALID_VOLTRANGE; - return(errorstatus); - } - - if (response &= SD_HIGH_CAPACITY) - { - CardType = SDIO_HIGH_CAPACITY_SD_CARD; - } - - }/* else MMC Card */ - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_PowerOFF -* Description : Turns the SDIO output signals off. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_PowerOFF(void) -{ - SD_Error errorstatus = SD_OK; - - /* Set Power State to OFF */ - SDIO_SetPowerState(SDIO_PowerState_OFF); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_InitializeCards -* Description : Intialises all cards or single card as the case may be. -* Card(s) come into standby state. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_InitializeCards(void) -{ - SD_Error errorstatus = SD_OK; - u16 rca = 0x01; - - if (SDIO_GetPowerState() == SDIO_PowerState_OFF) - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - - if (SDIO_SECURE_DIGITAL_IO_CARD != CardType) - { - /* Send CMD2 ALL_SEND_CID */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_ALL_SEND_CID; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Long; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp2Error(); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - CID_Tab[0] = SDIO_GetResponse(SDIO_RESP1); - CID_Tab[1] = SDIO_GetResponse(SDIO_RESP2); - CID_Tab[2] = SDIO_GetResponse(SDIO_RESP3); - CID_Tab[3] = SDIO_GetResponse(SDIO_RESP4); - } - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_SECURE_DIGITAL_IO_COMBO_CARD == CardType) - || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - /* Send CMD3 SET_REL_ADDR with argument 0 */ - /* SD Card publishes its RCA. */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_REL_ADDR; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp6Error(SDIO_SET_REL_ADDR, &rca); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - } - - if (SDIO_SECURE_DIGITAL_IO_CARD != CardType) - { - RCA = rca; - - /* Send CMD9 SEND_CSD with argument as card's RCA */ - SDIO_CmdInitStructure.SDIO_Argument = (u32)(rca << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_CSD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Long; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp2Error(); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - CSD_Tab[0] = SDIO_GetResponse(SDIO_RESP1); - CSD_Tab[1] = SDIO_GetResponse(SDIO_RESP2); - CSD_Tab[2] = SDIO_GetResponse(SDIO_RESP3); - CSD_Tab[3] = SDIO_GetResponse(SDIO_RESP4); - } - - errorstatus = SD_OK; /* All cards get intialized */ - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_GetCardInfo -* Description : Returns information about specific card. -* Input : cardinfo : pointer to a SD_CardInfo structure -* that contains all SD card information. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo) -{ - SD_Error errorstatus = SD_OK; - u8 tmp = 0; - - cardinfo->CardType = (u8)CardType; - cardinfo->RCA = (u16)RCA; - - /* Byte 0 */ - tmp = (u8)((CSD_Tab[0] & 0xFF000000) >> 24); - cardinfo->SD_csd.CSDStruct = (tmp & 0xC0) >> 6; - cardinfo->SD_csd.SysSpecVersion = (tmp & 0x3C) >> 2; - cardinfo->SD_csd.Reserved1 = tmp & 0x03; - - /* Byte 1 */ - tmp = (u8)((CSD_Tab[0] & 0x00FF0000) >> 16); - cardinfo->SD_csd.TAAC = tmp; - - /* Byte 2 */ - tmp = (u8)((CSD_Tab[0] & 0x0000FF00) >> 8); - cardinfo->SD_csd.NSAC = tmp; - - /* Byte 3 */ - tmp = (u8)(CSD_Tab[0] & 0x000000FF); - cardinfo->SD_csd.MaxBusClkFrec = tmp; - - /* Byte 4 */ - tmp = (u8)((CSD_Tab[1] & 0xFF000000) >> 24); - cardinfo->SD_csd.CardComdClasses = tmp << 4; - - /* Byte 5 */ - tmp = (u8)((CSD_Tab[1] & 0x00FF0000) >> 16); - cardinfo->SD_csd.CardComdClasses |= (tmp & 0xF0) >> 4; - cardinfo->SD_csd.RdBlockLen = tmp & 0x0F; - - /* Byte 6 */ - tmp = (u8)((CSD_Tab[1] & 0x0000FF00) >> 8); - cardinfo->SD_csd.PartBlockRead = (tmp & 0x80) >> 7; - cardinfo->SD_csd.WrBlockMisalign = (tmp & 0x40) >> 6; - cardinfo->SD_csd.RdBlockMisalign = (tmp & 0x20) >> 5; - cardinfo->SD_csd.DSRImpl = (tmp & 0x10) >> 4; - cardinfo->SD_csd.Reserved2 = 0; /* Reserved */ - - if ((CardType == SDIO_STD_CAPACITY_SD_CARD_V1_1) || (CardType == SDIO_STD_CAPACITY_SD_CARD_V2_0)) - { - cardinfo->SD_csd.DeviceSize = (tmp & 0x03) << 10; - - /* Byte 7 */ - tmp = (u8)(CSD_Tab[1] & 0x000000FF); - cardinfo->SD_csd.DeviceSize |= (tmp) << 2; - - /* Byte 8 */ - tmp = (u8)((CSD_Tab[2] & 0xFF000000) >> 24); - - cardinfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6; - cardinfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3; - cardinfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07); - - /* Byte 9 */ - tmp = (u8)((CSD_Tab[2] & 0x00FF0000) >> 16); - cardinfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5; - cardinfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2; - cardinfo->SD_csd.DeviceSizeMul = (tmp & 0x03) << 1; - - /* Byte 10 */ - tmp = (u8)((CSD_Tab[2] & 0x0000FF00) >> 8); - cardinfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7; - - cardinfo->CardCapacity = (cardinfo->SD_csd.DeviceSize + 1) ; - cardinfo->CardCapacity *= (1 << (cardinfo->SD_csd.DeviceSizeMul + 2)); - cardinfo->CardBlockSize = 1 << (cardinfo->SD_csd.RdBlockLen); - cardinfo->CardCapacity *= cardinfo->CardBlockSize; - } - else if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - /* Byte 7 */ - tmp = (u8)(CSD_Tab[1] & 0x000000FF); - cardinfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16; - - /* Byte 8 */ - tmp = (u8)((CSD_Tab[2] & 0xFF000000) >> 24); - - cardinfo->SD_csd.DeviceSize |= (tmp << 8); - - /* Byte 9 */ - tmp = (u8)((CSD_Tab[2] & 0x00FF0000) >> 16); - - cardinfo->SD_csd.DeviceSize |= (tmp); - - /* Byte 10 */ - tmp = (u8)((CSD_Tab[2] & 0x0000FF00) >> 8); - - cardinfo->CardCapacity = (cardinfo->SD_csd.DeviceSize + 1) * 512 * 1024; - cardinfo->CardBlockSize = 512; - } - - - cardinfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6; - cardinfo->SD_csd.EraseGrMul = (tmp & 0x3F) << 1; - - /* Byte 11 */ - tmp = (u8)(CSD_Tab[2] & 0x000000FF); - cardinfo->SD_csd.EraseGrMul |= (tmp & 0x80) >> 7; - cardinfo->SD_csd.WrProtectGrSize = (tmp & 0x7F); - - /* Byte 12 */ - tmp = (u8)((CSD_Tab[3] & 0xFF000000) >> 24); - cardinfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7; - cardinfo->SD_csd.ManDeflECC = (tmp & 0x60) >> 5; - cardinfo->SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2; - cardinfo->SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2; - - /* Byte 13 */ - tmp = (u8)((CSD_Tab[3] & 0x00FF0000) >> 16); - cardinfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6; - cardinfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5; - cardinfo->SD_csd.Reserved3 = 0; - cardinfo->SD_csd.ContentProtectAppli = (tmp & 0x01); - - /* Byte 14 */ - tmp = (u8)((CSD_Tab[3] & 0x0000FF00) >> 8); - cardinfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7; - cardinfo->SD_csd.CopyFlag = (tmp & 0x40) >> 6; - cardinfo->SD_csd.PermWrProtect = (tmp & 0x20) >> 5; - cardinfo->SD_csd.TempWrProtect = (tmp & 0x10) >> 4; - cardinfo->SD_csd.FileFormat = (tmp & 0x0C) >> 2; - cardinfo->SD_csd.ECC = (tmp & 0x03); - - /* Byte 15 */ - tmp = (u8)(CSD_Tab[3] & 0x000000FF); - cardinfo->SD_csd.CSD_CRC = (tmp & 0xFE) >> 1; - cardinfo->SD_csd.Reserved4 = 1; - - - /* Byte 0 */ - tmp = (u8)((CID_Tab[0] & 0xFF000000) >> 24); - cardinfo->SD_cid.ManufacturerID = tmp; - - /* Byte 1 */ - tmp = (u8)((CID_Tab[0] & 0x00FF0000) >> 16); - cardinfo->SD_cid.OEM_AppliID = tmp << 8; - - /* Byte 2 */ - tmp = (u8)((CID_Tab[0] & 0x000000FF00) >> 8); - cardinfo->SD_cid.OEM_AppliID |= tmp; - - /* Byte 3 */ - tmp = (u8)(CID_Tab[0] & 0x000000FF); - cardinfo->SD_cid.ProdName1 = tmp << 24; - - /* Byte 4 */ - tmp = (u8)((CID_Tab[1] & 0xFF000000) >> 24); - cardinfo->SD_cid.ProdName1 |= tmp << 16; - - /* Byte 5 */ - tmp = (u8)((CID_Tab[1] & 0x00FF0000) >> 16); - cardinfo->SD_cid.ProdName1 |= tmp << 8; - - /* Byte 6 */ - tmp = (u8)((CID_Tab[1] & 0x0000FF00) >> 8); - cardinfo->SD_cid.ProdName1 |= tmp; - - /* Byte 7 */ - tmp = (u8)(CID_Tab[1] & 0x000000FF); - cardinfo->SD_cid.ProdName2 = tmp; - - /* Byte 8 */ - tmp = (u8)((CID_Tab[2] & 0xFF000000) >> 24); - cardinfo->SD_cid.ProdRev = tmp; - - /* Byte 9 */ - tmp = (u8)((CID_Tab[2] & 0x00FF0000) >> 16); - cardinfo->SD_cid.ProdSN = tmp << 24; - - /* Byte 10 */ - tmp = (u8)((CID_Tab[2] & 0x0000FF00) >> 8); - cardinfo->SD_cid.ProdSN |= tmp << 16; - - /* Byte 11 */ - tmp = (u8)(CID_Tab[2] & 0x000000FF); - cardinfo->SD_cid.ProdSN |= tmp << 8; - - /* Byte 12 */ - tmp = (u8)((CID_Tab[3] & 0xFF000000) >> 24); - cardinfo->SD_cid.ProdSN |= tmp; - - /* Byte 13 */ - tmp = (u8)((CID_Tab[3] & 0x00FF0000) >> 16); - cardinfo->SD_cid.Reserved1 |= (tmp & 0xF0) >> 4; - cardinfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8; - - /* Byte 14 */ - tmp = (u8)((CID_Tab[3] & 0x0000FF00) >> 8); - cardinfo->SD_cid.ManufactDate |= tmp; - - /* Byte 15 */ - tmp = (u8)(CID_Tab[3] & 0x000000FF); - cardinfo->SD_cid.CID_CRC = (tmp & 0xFE) >> 1; - cardinfo->SD_cid.Reserved2 = 1; - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_EnableWideBusOperation -* Description : Enables wide bus opeartion for the requeseted card if -* supported by card. -* Input : WideMode: Specifies the SD card wide bus mode. -* This parameter can be one of the following values: -* - SDIO_BusWide_8b: 8-bit data transfer (Only for MMC) -* - SDIO_BusWide_4b: 4-bit data transfer -* - SDIO_BusWide_1b: 1-bit data transfer -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_EnableWideBusOperation(u32 WideMode) -{ - SD_Error errorstatus = SD_OK; - - /* MMC Card doesn't support this feature */ - if (SDIO_MULTIMEDIA_CARD == CardType) - { - errorstatus = SD_UNSUPPORTED_FEATURE; - return(errorstatus); - } - else if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - if (SDIO_BusWide_8b == WideMode) - { - errorstatus = SD_UNSUPPORTED_FEATURE; - return(errorstatus); - } - else if (SDIO_BusWide_4b == WideMode) - { - errorstatus = SDEnWideBus(ENABLE); - - if (SD_OK == errorstatus) - { - /* Configure the SDIO peripheral */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_TRANSFER_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_4b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - } - } - else - { - errorstatus = SDEnWideBus(DISABLE); - - if (SD_OK == errorstatus) - { - /* Configure the SDIO peripheral */ - SDIO_InitStructure.SDIO_ClockDiv = SDIO_TRANSFER_CLK_DIV; - SDIO_InitStructure.SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStructure.SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStructure.SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStructure.SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStructure.SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; - SDIO_Init(&SDIO_InitStructure); - } - } - } - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_SetDeviceMode -* Description : Sets device mode whether to operate in Polling, Interrupt or -* DMA mode. -* Input : Mode: Specifies the Data Transfer mode. -* This parameter can be one of the following values: -* - SD_DMA_MODE: Data transfer using DMA. -* - SD_INTERRUPT_MODE: Data transfer using interrupts. -* - SD_POLLING_MODE: Data transfer using flags. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_SetDeviceMode(u32 Mode) -{ - SD_Error errorstatus = SD_OK; - - if ((Mode == SD_DMA_MODE) || (Mode == SD_INTERRUPT_MODE) || (Mode == SD_POLLING_MODE)) - { - DeviceMode = Mode; - } - else - { - errorstatus = SD_INVALID_PARAMETER; - } - return(errorstatus); - -} - -/******************************************************************************* -* Function Name : SD_SelectDeselect -* Description : Selects od Deselects the corresponding card. -* Input : addr: Address of the Card to be selected. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_SelectDeselect(u32 addr) -{ - SD_Error errorstatus = SD_OK; - - /* Send CMD7 SDIO_SEL_DESEL_CARD */ - SDIO_CmdInitStructure.SDIO_Argument = addr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEL_DESEL_CARD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SEL_DESEL_CARD); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_ReadBlock -* Description : Allows to read one block from a specified address in a card. -* Input : - addr: Address from where data are to be read. -* - readbuff: pointer to the buffer that will contain the -* received data -* - blocksize: the SD card Data block size. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_ReadBlock(u32 addr, u32 *readbuff, u16 BlockSize) -{ - SD_Error errorstatus = SD_OK; - u32 count = 0, *tempbuff = readbuff; - u8 power = 0; - - if (NULL == readbuff) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - TransferError = SD_OK; - TransferEnd = 0; - TotalNumberOfBytes = 0; - - /* Clear all DPSM configuration */ - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 0; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Disable; - SDIO_DataConfig(&SDIO_DataInitStructure); - SDIO_DMACmd(DISABLE); - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - addr /= 512; - } - if ((BlockSize > 0) && (BlockSize <= 2048) && ((BlockSize & (BlockSize - 1)) == 0)) - { - power = convert_from_bytes_to_power_of_two(BlockSize); - - /* Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCKLEN); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - } - else - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (u32) power << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - TotalNumberOfBytes = BlockSize; - StopCondition = 0; - DestBuffer = readbuff; - - /* Send CMD17 READ_SINGLE_BLOCK */ - SDIO_CmdInitStructure.SDIO_Argument = (u32)addr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_READ_SINGLE_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_READ_SINGLE_BLOCK); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - /* In case of single block transfer, no need of stop transfer at all.*/ - if (DeviceMode == SD_POLLING_MODE) - { - /* Polling mode */ - while (!(SDIO->STA &(SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXFIFOHF) != RESET) - { - for (count = 0; count < 8; count++) - { - *(tempbuff + count) = SDIO_ReadData(); - } - tempbuff += 8; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - while (SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) - { - *tempbuff = SDIO_ReadData(); - tempbuff++; - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - } - else if (DeviceMode == SD_INTERRUPT_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_RXFIFOHF | SDIO_IT_STBITERR, ENABLE); - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - else if (DeviceMode == SD_DMA_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_STBITERR, ENABLE); - SDIO_DMACmd(ENABLE); - DMA_RxConfiguration(readbuff, BlockSize); - while (DMA_GetFlagStatus(DMA2_FLAG_TC4) == RESET) - {} - } - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_ReadMultiBlocks -* Description : Allows to read blocks from a specified address in a card. -* Input : - addr: Address from where data are to be read. -* - readbuff: pointer to the buffer that will contain the -* received data. -* - BlockSize: the SD card Data block size. -* - NumberOfBlocks: number of blocks to be read. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_ReadMultiBlocks(u32 addr, u32 *readbuff, u16 BlockSize, u32 NumberOfBlocks) -{ - SD_Error errorstatus = SD_OK; - u32 count = 0, *tempbuff = readbuff; - u8 power = 0; - - if (NULL == readbuff) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - TransferError = SD_OK; - TransferEnd = 0; - TotalNumberOfBytes = 0; - - /* Clear all DPSM configuration */ - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 0; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Disable; - SDIO_DataConfig(&SDIO_DataInitStructure); - SDIO_DMACmd(DISABLE); - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - addr /= 512; - } - - if ((BlockSize > 0) && (BlockSize <= 2048) && (0 == (BlockSize & (BlockSize - 1)))) - { - power = convert_from_bytes_to_power_of_two(BlockSize); - - /* Set Block Size for Card */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCKLEN); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - } - else - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - if (NumberOfBlocks > 1) - { - /* Common to all modes */ - if (NumberOfBlocks * BlockSize > SD_MAX_DATA_LENGTH) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - TotalNumberOfBytes = NumberOfBlocks * BlockSize; - StopCondition = 1; - DestBuffer = readbuff; - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = NumberOfBlocks * BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (u32) power << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /* Send CMD18 READ_MULT_BLOCK with argument data address */ - SDIO_CmdInitStructure.SDIO_Argument = (u32)addr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_READ_MULT_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_READ_MULT_BLOCK); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - if (DeviceMode == SD_POLLING_MODE) - { - /* Polling mode */ - while (!(SDIO->STA &(SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DATAEND | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXFIFOHF) != RESET) - { - for (count = 0; count < SD_HALFFIFO; count++) - { - *(tempbuff + count) = SDIO_ReadData(); - } - tempbuff += SD_HALFFIFO; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - while (SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) - { - *tempbuff = SDIO_ReadData(); - tempbuff++; - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DATAEND) != RESET) - { - /* In Case Of SD-CARD Send Command STOP_TRANSMISSION */ - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType)) - { - /* Send CMD12 STOP_TRANSMISSION */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_STOP_TRANSMISSION; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_STOP_TRANSMISSION); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - } - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - } - else if (DeviceMode == SD_INTERRUPT_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_RXFIFOHF | SDIO_IT_STBITERR, ENABLE); - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - else if (DeviceMode == SD_DMA_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_RXOVERR | SDIO_IT_STBITERR, ENABLE); - SDIO_DMACmd(ENABLE); - DMA_RxConfiguration(readbuff, (NumberOfBlocks * BlockSize)); - while (DMA_GetFlagStatus(DMA2_FLAG_TC4) == RESET) - {} - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - } - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_WriteBlock -* Description : Allows to write one block starting from a specified address -* in a card. -* Input : - addr: Address from where data are to be read. -* - writebuff: pointer to the buffer that contain the data to be -* transferred. -* - BlockSize: the SD card Data block size. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_WriteBlock(u32 addr, u32 *writebuff, u16 BlockSize) -{ - SD_Error errorstatus = SD_OK; - u8 power = 0, cardstate = 0; - u32 timeout = 0, bytestransferred = 0; - u32 cardstatus = 0, count = 0, restwords = 0; - u32 *tempbuff = writebuff; - - if (writebuff == NULL) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - TransferError = SD_OK; - TransferEnd = 0; - TotalNumberOfBytes = 0; - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 0; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Disable; - SDIO_DataConfig(&SDIO_DataInitStructure); - SDIO_DMACmd(DISABLE); - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - addr /= 512; - } - - /* Set the block size, both on controller and card */ - if ((BlockSize > 0) && (BlockSize <= 2048) && ((BlockSize & (BlockSize - 1)) == 0)) - { - power = convert_from_bytes_to_power_of_two(BlockSize); - - SDIO_CmdInitStructure.SDIO_Argument = (u32) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCKLEN); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - else - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - /* Wait till card is ready for data Added */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) (RCA << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SEND_STATUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - cardstatus = SDIO_GetResponse(SDIO_RESP1); - - timeout = SD_DATATIMEOUT; - - while (((cardstatus & 0x00000100) == 0) && (timeout > 0)) - { - timeout--; - SDIO_CmdInitStructure.SDIO_Argument = (u32) (RCA << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SEND_STATUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - cardstatus = SDIO_GetResponse(SDIO_RESP1); - } - - if (timeout == 0) - { - return(SD_ERROR); - } - - /* Send CMD24 WRITE_SINGLE_BLOCK */ - SDIO_CmdInitStructure.SDIO_Argument = addr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_WRITE_SINGLE_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_WRITE_SINGLE_BLOCK); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - TotalNumberOfBytes = BlockSize; - StopCondition = 0; - SrcBuffer = writebuff; - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (u32) power << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - /* In case of single data block transfer no need of stop command at all */ - if (DeviceMode == SD_POLLING_MODE) - { - while (!(SDIO->STA & (SDIO_FLAG_DBCKEND | SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_TXFIFOHE) != RESET) - { - if ((TotalNumberOfBytes - bytestransferred) < 32) - { - restwords = ((TotalNumberOfBytes - bytestransferred) % 4 == 0) ? ((TotalNumberOfBytes - bytestransferred) / 4) : (( TotalNumberOfBytes - bytestransferred) / 4 + 1); - - for (count = 0; count < restwords; count++, tempbuff++, bytestransferred += 4) - { - SDIO_WriteData(*tempbuff); - } - } - else - { - for (count = 0; count < 8; count++) - { - SDIO_WriteData(*(tempbuff + count)); - } - tempbuff += 8; - bytestransferred += 32; - } - } - } - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_TXUNDERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_TXUNDERR); - errorstatus = SD_TX_UNDERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - } - else if (DeviceMode == SD_INTERRUPT_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_FLAG_TXFIFOHE | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR, ENABLE); - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - else if (DeviceMode == SD_DMA_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR, ENABLE); - DMA_TxConfiguration(writebuff, BlockSize); - SDIO_DMACmd(ENABLE); - while (DMA_GetFlagStatus(DMA2_FLAG_TC4) == RESET) - {} - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /* Wait till the card is in programming state */ - errorstatus = IsCardProgramming(&cardstate); - - while ((errorstatus == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING))) - { - errorstatus = IsCardProgramming(&cardstate); - } - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_WriteMultiBlocks -* Description : Allows to write blocks starting from a specified address in -* a card. -* Input : - addr: Address from where data are to be read. -* - writebuff: pointer to the buffer that contain the data to be -* transferred. -* - BlockSize: the SD card Data block size. -* - NumberOfBlocks: number of blocks to be written. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_WriteMultiBlocks(u32 addr, u32 *writebuff, u16 BlockSize, u32 NumberOfBlocks) -{ - SD_Error errorstatus = SD_OK; - u8 power = 0, cardstate = 0; - u32 bytestransferred = 0; - u32 count = 0, restwords = 0; - u32 *tempbuff = writebuff; - - if (writebuff == NULL) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - TransferError = SD_OK; - TransferEnd = 0; - TotalNumberOfBytes = 0; - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 0; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Disable; - SDIO_DataConfig(&SDIO_DataInitStructure); - SDIO_DMACmd(DISABLE); - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - BlockSize = 512; - addr /= 512; - } - - /* Set the block size, both on controller and card */ - if ((BlockSize > 0) && (BlockSize <= 2048) && ((BlockSize & (BlockSize - 1)) == 0)) - { - power = convert_from_bytes_to_power_of_two(BlockSize); - - SDIO_CmdInitStructure.SDIO_Argument = (u32) BlockSize; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCKLEN); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - else - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - /* Wait till card is ready for data Added */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) (RCA << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SEND_STATUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - if (NumberOfBlocks > 1) - { - /* Common to all modes */ - if (NumberOfBlocks * BlockSize > SD_MAX_DATA_LENGTH) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - /* To improve performance */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) (RCA << 16); - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - /* To improve performance */ - SDIO_CmdInitStructure.SDIO_Argument = (u32)NumberOfBlocks; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCK_COUNT; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCK_COUNT); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - - /* Send CMD25 WRITE_MULT_BLOCK with argument data address */ - SDIO_CmdInitStructure.SDIO_Argument = (u32)addr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_WRITE_MULT_BLOCK; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_WRITE_MULT_BLOCK); - - if (SD_OK != errorstatus) - { - return(errorstatus); - } - - TotalNumberOfBytes = NumberOfBlocks * BlockSize; - StopCondition = 1; - SrcBuffer = writebuff; - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = NumberOfBlocks * BlockSize; - SDIO_DataInitStructure.SDIO_DataBlockSize = (u32) power << 4; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - if (DeviceMode == SD_POLLING_MODE) - { - while (!(SDIO->STA & (SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DATAEND | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_TXFIFOHE) != RESET) - { - if (!((TotalNumberOfBytes - bytestransferred) < SD_HALFFIFOBYTES)) - { - for (count = 0; count < SD_HALFFIFO; count++) - { - SDIO_WriteData(*(tempbuff + count)); - } - tempbuff += SD_HALFFIFO; - bytestransferred += SD_HALFFIFOBYTES; - } - else - { - restwords = ((TotalNumberOfBytes - bytestransferred) % 4 == 0) ? ((TotalNumberOfBytes - bytestransferred) / 4) : - ((TotalNumberOfBytes - bytestransferred) / 4 + 1); - - for (count = 0; count < restwords; count++, tempbuff++, bytestransferred += 4) - { - SDIO_WriteData(*tempbuff); - } - } - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_TXUNDERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_TXUNDERR); - errorstatus = SD_TX_UNDERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DATAEND) != RESET) - { - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - /* Send CMD12 STOP_TRANSMISSION */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_STOP_TRANSMISSION; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - - errorstatus = CmdResp1Error(SDIO_STOP_TRANSMISSION); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - } - } - else if (DeviceMode == SD_INTERRUPT_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_TXFIFOHE | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR, ENABLE); - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - else if (DeviceMode == SD_DMA_MODE) - { - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | SDIO_IT_TXUNDERR | SDIO_IT_STBITERR, ENABLE); - SDIO_DMACmd(ENABLE); - DMA_TxConfiguration(writebuff, (NumberOfBlocks * BlockSize)); - while (DMA_GetFlagStatus(DMA2_FLAG_TC4) == RESET) - {} - while ((TransferEnd == 0) && (TransferError == SD_OK)) - {} - if (TransferError != SD_OK) - { - return(TransferError); - } - } - } - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /* Wait till the card is in programming state */ - errorstatus = IsCardProgramming(&cardstate); - - while ((errorstatus == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING))) - { - errorstatus = IsCardProgramming(&cardstate); - } - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_GetTransferState -* Description : Gets the cuurent data transfer state. -* Input : None -* Output : None -* Return : SDTransferState: Data Transfer state. -* This value can be: -* - SD_NO_TRANSFER: No data transfer is acting -* - SD_TRANSFER_IN_PROGRESS: Data transfer is acting -*******************************************************************************/ -SDTransferState SD_GetTransferState(void) -{ - if (SDIO->STA & (SDIO_FLAG_TXACT | SDIO_FLAG_RXACT)) - { - return(SD_TRANSFER_IN_PROGRESS); - } - else - { - return(SD_NO_TRANSFER); - } -} - -/******************************************************************************* -* Function Name : SD_StopTransfer -* Description : Aborts an ongoing data transfer. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_StopTransfer(void) -{ - SD_Error errorstatus = SD_OK; - - /* Send CMD12 STOP_TRANSMISSION */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_STOP_TRANSMISSION; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_STOP_TRANSMISSION); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_Erase -* Description : Allows to erase memory area specified for the given card. -* Input : - startaddr: the start address. -* - endaddr: the end address. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_Erase(u32 startaddr, u32 endaddr) -{ - SD_Error errorstatus = SD_OK; - u32 delay = 0; - vu32 maxdelay = 0; - u8 cardstate = 0; - - /* Check if the card coomnd class supports erase command */ - if (((CSD_Tab[1] >> 20) & SD_CCCC_ERASE) == 0) - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - - maxdelay = 72000 / ((SDIO->CLKCR & 0xFF) + 2); - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - if (CardType == SDIO_HIGH_CAPACITY_SD_CARD) - { - startaddr /= 512; - endaddr /= 512; - } - - /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */ - if ((SDIO_STD_CAPACITY_SD_CARD_V1_1 == CardType) || (SDIO_STD_CAPACITY_SD_CARD_V2_0 == CardType) || (SDIO_HIGH_CAPACITY_SD_CARD == CardType)) - { - /* Send CMD32 SD_ERASE_GRP_START with argument as addr */ - SDIO_CmdInitStructure.SDIO_Argument = startaddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SD_ERASE_GRP_START; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SD_ERASE_GRP_START); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* Send CMD33 SD_ERASE_GRP_END with argument as addr */ - SDIO_CmdInitStructure.SDIO_Argument = endaddr; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SD_ERASE_GRP_END; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SD_ERASE_GRP_END); - if (errorstatus != SD_OK) - { - return(errorstatus); - } - } - - /* Send CMD38 ERASE */ - SDIO_CmdInitStructure.SDIO_Argument = 0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_ERASE; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_ERASE); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - for (delay = 0; delay < maxdelay; delay++) - {} - - /* Wait till the card is in programming state */ - errorstatus = IsCardProgramming(&cardstate); - - while ((errorstatus == SD_OK) && ((SD_CARD_PROGRAMMING == cardstate) || (SD_CARD_RECEIVING == cardstate))) - { - errorstatus = IsCardProgramming(&cardstate); - } - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_SendStatus -* Description : Returns the current card's status. -* Input : pcardstatus: pointer to the buffer that will contain the SD -* card status (Card Status register). -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_SendStatus(u32 *pcardstatus) -{ - SD_Error errorstatus = SD_OK; - - if (pcardstatus == NULL) - { - errorstatus = SD_INVALID_PARAMETER; - return(errorstatus); - } - - SDIO_CmdInitStructure.SDIO_Argument = (u32) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - - errorstatus = CmdResp1Error(SDIO_SEND_STATUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - *pcardstatus = SDIO_GetResponse(SDIO_RESP1); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_SendSDStatus -* Description : Returns the current SD card's status. -* Input : psdstatus: pointer to the buffer that will contain the SD -* card status (SD Status register). -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_SendSDStatus(u32 *psdstatus) -{ - SD_Error errorstatus = SD_OK; - u32 count = 0; - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - /* Set block size for card if it is not equal to current block size for card. */ - SDIO_CmdInitStructure.SDIO_Argument = 64; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCKLEN); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* CMD55 */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 64; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_64b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - - /* Send ACMD13 SD_APP_STAUS with argument as card's RCA.*/ - SDIO_CmdInitStructure.SDIO_Argument = 0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SD_APP_STAUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - errorstatus = CmdResp1Error(SDIO_SD_APP_STAUS); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - while (!(SDIO->STA &(SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXFIFOHF) != RESET) - { - for (count = 0; count < 8; count++) - { - *(psdstatus + count) = SDIO_ReadData(); - } - psdstatus += 8; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - - while (SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) - { - *psdstatus = SDIO_ReadData(); - psdstatus++; - } - - /* Clear all the static status flags*/ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - psdstatus -= 16; - for (count = 0; count < 16; count++) - { - psdstatus[count] = ((psdstatus[count] & SD_0TO7BITS) << 24) |((psdstatus[count] & SD_8TO15BITS) << 8) | - ((psdstatus[count] & SD_16TO23BITS) >> 8) |((psdstatus[count] & SD_24TO31BITS) >> 24); - } - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SD_ProcessIRQSrc -* Description : Allows to process all the interrupts that are high. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -SD_Error SD_ProcessIRQSrc(void) -{ - u32 count = 0, restwords = 0; - - if (DeviceMode == SD_INTERRUPT_MODE) - { - if (SDIO_GetITStatus(SDIO_IT_RXFIFOHF) != RESET) - { - for (count = 0; count < SD_HALFFIFO; count++) - { - *(DestBuffer + count) = SDIO_ReadData(); - } - DestBuffer += SD_HALFFIFO; - NumberOfBytes += SD_HALFFIFOBYTES; - } - else if (SDIO_GetITStatus(SDIO_IT_TXFIFOHE) != RESET) - { - if ((TotalNumberOfBytes - NumberOfBytes) < SD_HALFFIFOBYTES) - { - restwords = ((TotalNumberOfBytes - NumberOfBytes) % 4 == 0) ? - ((TotalNumberOfBytes - NumberOfBytes) / 4) : - ((TotalNumberOfBytes - NumberOfBytes) / 4 + 1); - - for (count = 0; count < restwords; count++, SrcBuffer++, NumberOfBytes += 4) - { - SDIO_WriteData(*SrcBuffer); - } - } - else - { - for (count = 0; count < SD_HALFFIFO; count++) - { - SDIO_WriteData(*(SrcBuffer + count)); - } - - SrcBuffer += SD_HALFFIFO; - NumberOfBytes += SD_HALFFIFOBYTES; - } - } - } - - if (SDIO_GetITStatus(SDIO_IT_DATAEND) != RESET) - { - if (DeviceMode != SD_DMA_MODE) - { - while ((SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) && (NumberOfBytes < TotalNumberOfBytes)) - { - *DestBuffer = SDIO_ReadData(); - DestBuffer++; - NumberOfBytes += 4; - } - } - - if (StopCondition == 1) - { - TransferError = SD_StopTransfer(); - } - else - { - TransferError = SD_OK; - } - SDIO_ClearITPendingBit(SDIO_IT_DATAEND); - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - TransferEnd = 1; - NumberOfBytes = 0; - return(TransferError); - } - - if (SDIO_GetITStatus(SDIO_IT_DCRCFAIL) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_DCRCFAIL); - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - NumberOfBytes = 0; - TransferError = SD_DATA_CRC_FAIL; - return(SD_DATA_CRC_FAIL); - } - - if (SDIO_GetITStatus(SDIO_IT_DTIMEOUT) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_DTIMEOUT); - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - NumberOfBytes = 0; - TransferError = SD_DATA_TIMEOUT; - return(SD_DATA_TIMEOUT); - } - - if (SDIO_GetITStatus(SDIO_IT_RXOVERR) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_RXOVERR); - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - NumberOfBytes = 0; - TransferError = SD_RX_OVERRUN; - return(SD_RX_OVERRUN); - } - - if (SDIO_GetITStatus(SDIO_IT_TXUNDERR) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_TXUNDERR); - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - NumberOfBytes = 0; - TransferError = SD_TX_UNDERRUN; - return(SD_TX_UNDERRUN); - } - - if (SDIO_GetITStatus(SDIO_IT_STBITERR) != RESET) - { - SDIO_ClearITPendingBit(SDIO_IT_STBITERR); - SDIO_ITConfig(SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND | - SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR | - SDIO_IT_RXOVERR | SDIO_IT_STBITERR, DISABLE); - NumberOfBytes = 0; - TransferError = SD_START_BIT_ERR; - return(SD_START_BIT_ERR); - } - - return(SD_OK); -} - -/******************************************************************************* -* Function Name : CmdError -* Description : Checks for error conditions for CMD0. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error CmdError(void) -{ - SD_Error errorstatus = SD_OK; - u32 timeout; - - timeout = SDIO_CMD0TIMEOUT; /* 10000 */ - - while ((timeout > 0) && (SDIO_GetFlagStatus(SDIO_FLAG_CMDSENT) == RESET)) - { - timeout--; - } - - if (timeout == 0) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - return(errorstatus); - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : CmdResp7Error -* Description : Checks for error conditions for R7. -* response. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error CmdResp7Error(void) -{ - SD_Error errorstatus = SD_OK; - u32 status; - u32 timeout = SDIO_CMD0TIMEOUT; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT)) && (timeout > 0)) - { - timeout--; - status = SDIO->STA; - } - - if ((timeout == 0) || (status & SDIO_FLAG_CTIMEOUT)) - { - /* Card is not V2.0 complient or card does not support the set voltage range */ - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - - if (status & SDIO_FLAG_CMDREND) - { - /* Card is SD V2.0 compliant */ - errorstatus = SD_OK; - SDIO_ClearFlag(SDIO_FLAG_CMDREND); - return(errorstatus); - } - return(errorstatus); -} - -/******************************************************************************* -* Function Name : CmdResp1Error -* Description : Checks for error conditions for R1. -* response -* Input : cmd: The sent command index. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error CmdResp1Error(u8 cmd) -{ - SD_Error errorstatus = SD_OK; - u32 status; - u32 response_r1; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - /* Check response received is of desired command */ - if (SDIO_GetCommandResponse() != cmd) - { - errorstatus = SD_ILLEGAL_CMD; - return(errorstatus); - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /* We have received response, retrieve it for analysis */ - response_r1 = SDIO_GetResponse(SDIO_RESP1); - - if ((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO) - { - return(errorstatus); - } - - if (response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) - { - return(SD_ADDR_OUT_OF_RANGE); - } - - if (response_r1 & SD_OCR_ADDR_MISALIGNED) - { - return(SD_ADDR_MISALIGNED); - } - - if (response_r1 & SD_OCR_BLOCK_LEN_ERR) - { - return(SD_BLOCK_LEN_ERR); - } - - if (response_r1 & SD_OCR_ERASE_SEQ_ERR) - { - return(SD_ERASE_SEQ_ERR); - } - - if (response_r1 & SD_OCR_BAD_ERASE_PARAM) - { - return(SD_BAD_ERASE_PARAM); - } - - if (response_r1 & SD_OCR_WRITE_PROT_VIOLATION) - { - return(SD_WRITE_PROT_VIOLATION); - } - - if (response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) - { - return(SD_LOCK_UNLOCK_FAILED); - } - - if (response_r1 & SD_OCR_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - if (response_r1 & SD_OCR_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if (response_r1 & SD_OCR_CARD_ECC_FAILED) - { - return(SD_CARD_ECC_FAILED); - } - - if (response_r1 & SD_OCR_CC_ERROR) - { - return(SD_CC_ERROR); - } - - if (response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if (response_r1 & SD_OCR_STREAM_READ_UNDERRUN) - { - return(SD_STREAM_READ_UNDERRUN); - } - - if (response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) - { - return(SD_STREAM_WRITE_OVERRUN); - } - - if (response_r1 & SD_OCR_CID_CSD_OVERWRIETE) - { - return(SD_CID_CSD_OVERWRITE); - } - - if (response_r1 & SD_OCR_WP_ERASE_SKIP) - { - return(SD_WP_ERASE_SKIP); - } - - if (response_r1 & SD_OCR_CARD_ECC_DISABLED) - { - return(SD_CARD_ECC_DISABLED); - } - - if (response_r1 & SD_OCR_ERASE_RESET) - { - return(SD_ERASE_RESET); - } - - if (response_r1 & SD_OCR_AKE_SEQ_ERROR) - { - return(SD_AKE_SEQ_ERROR); - } - return(errorstatus); -} - -/******************************************************************************* -* Function Name : CmdResp3Error -* Description : Checks for error conditions for R3 (OCR). -* response. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error CmdResp3Error(void) -{ - SD_Error errorstatus = SD_OK; - u32 status; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - return(errorstatus); -} - -/******************************************************************************* -* Function Name : CmdResp2Error -* Description : Checks for error conditions for R2 (CID or CSD). -* response. -* Input : None -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error CmdResp2Error(void) -{ - SD_Error errorstatus = SD_OK; - u32 status; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CTIMEOUT | SDIO_FLAG_CMDREND))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : CmdResp6Error -* Description : Checks for error conditions for R6 (RCA). -* response. -* Input : - cmd: The sent command index. -* - prca: pointer to the variable that will contain the SD -* card relative address RCA. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error CmdResp6Error(u8 cmd, u16 *prca) -{ - SD_Error errorstatus = SD_OK; - u32 status; - u32 response_r1; - - status = SDIO->STA; - - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CTIMEOUT | SDIO_FLAG_CMDREND))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - /* Check response received is of desired command */ - if (SDIO_GetCommandResponse() != cmd) - { - errorstatus = SD_ILLEGAL_CMD; - return(errorstatus); - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - /* We have received response, retrieve it. */ - response_r1 = SDIO_GetResponse(SDIO_RESP1); - - if (SD_ALLZERO == (response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED))) - { - *prca = (u16) (response_r1 >> 16); - return(errorstatus); - } - - if (response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if (response_r1 & SD_R6_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if (response_r1 & SD_R6_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : SDEnWideBus -* Description : Enables or disables the SDIO wide bus mode. -* Input : NewState: new state of the SDIO wide bus mode. -* This parameter can be: ENABLE or DISABLE. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error SDEnWideBus(FunctionalState NewState) -{ - SD_Error errorstatus = SD_OK; - - u32 scr[2] = {0, 0}; - - if (SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) - { - errorstatus = SD_LOCK_UNLOCK_FAILED; - return(errorstatus); - } - - /* Get SCR Register */ - errorstatus = FindSCR(RCA, scr); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* If wide bus operation to be enabled */ - if (NewState == ENABLE) - { - /* If requested card supports wide bus operation */ - if ((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO) - { - /* Send CMD55 APP_CMD with argument as card's RCA.*/ - SDIO_CmdInitStructure.SDIO_Argument = (u32) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ - SDIO_CmdInitStructure.SDIO_Argument = 0x2; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_SD_SET_BUSWIDTH; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_APP_SD_SET_BUSWIDTH); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - return(errorstatus); - } - else - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - } /* If wide bus operation to be disabled */ - else - { - /* If requested card supports 1 bit mode operation */ - if ((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO) - { - /* Send CMD55 APP_CMD with argument as card's RCA.*/ - SDIO_CmdInitStructure.SDIO_Argument = (u32) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */ - SDIO_CmdInitStructure.SDIO_Argument = 0x00; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_SD_SET_BUSWIDTH; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_APP_SD_SET_BUSWIDTH); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - return(errorstatus); - } - else - { - errorstatus = SD_REQUEST_NOT_APPLICABLE; - return(errorstatus); - } - } -} - -/******************************************************************************* -* Function Name : IsCardProgramming -* Description : Checks if the SD card is in programming state. -* Input : pstatus: pointer to the variable that will contain the SD -* card state. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error IsCardProgramming(u8 *pstatus) -{ - SD_Error errorstatus = SD_OK; - vu32 respR1 = 0, status = 0; - - SDIO_CmdInitStructure.SDIO_Argument = (u32) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SEND_STATUS; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - status = SDIO->STA; - while (!(status & (SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))) - { - status = SDIO->STA; - } - - if (status & SDIO_FLAG_CTIMEOUT) - { - errorstatus = SD_CMD_RSP_TIMEOUT; - SDIO_ClearFlag(SDIO_FLAG_CTIMEOUT); - return(errorstatus); - } - else if (status & SDIO_FLAG_CCRCFAIL) - { - errorstatus = SD_CMD_CRC_FAIL; - SDIO_ClearFlag(SDIO_FLAG_CCRCFAIL); - return(errorstatus); - } - - status = (u32)SDIO_GetCommandResponse(); - - /* Check response received is of desired command */ - if (status != SDIO_SEND_STATUS) - { - errorstatus = SD_ILLEGAL_CMD; - return(errorstatus); - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - - /* We have received response, retrieve it for analysis */ - respR1 = SDIO_GetResponse(SDIO_RESP1); - - /* Find out card status */ - *pstatus = (u8) ((respR1 >> 9) & 0x0000000F); - - if ((respR1 & SD_OCR_ERRORBITS) == SD_ALLZERO) - { - return(errorstatus); - } - - if (respR1 & SD_OCR_ADDR_OUT_OF_RANGE) - { - return(SD_ADDR_OUT_OF_RANGE); - } - - if (respR1 & SD_OCR_ADDR_MISALIGNED) - { - return(SD_ADDR_MISALIGNED); - } - - if (respR1 & SD_OCR_BLOCK_LEN_ERR) - { - return(SD_BLOCK_LEN_ERR); - } - - if (respR1 & SD_OCR_ERASE_SEQ_ERR) - { - return(SD_ERASE_SEQ_ERR); - } - - if (respR1 & SD_OCR_BAD_ERASE_PARAM) - { - return(SD_BAD_ERASE_PARAM); - } - - if (respR1 & SD_OCR_WRITE_PROT_VIOLATION) - { - return(SD_WRITE_PROT_VIOLATION); - } - - if (respR1 & SD_OCR_LOCK_UNLOCK_FAILED) - { - return(SD_LOCK_UNLOCK_FAILED); - } - - if (respR1 & SD_OCR_COM_CRC_FAILED) - { - return(SD_COM_CRC_FAILED); - } - - if (respR1 & SD_OCR_ILLEGAL_CMD) - { - return(SD_ILLEGAL_CMD); - } - - if (respR1 & SD_OCR_CARD_ECC_FAILED) - { - return(SD_CARD_ECC_FAILED); - } - - if (respR1 & SD_OCR_CC_ERROR) - { - return(SD_CC_ERROR); - } - - if (respR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) - { - return(SD_GENERAL_UNKNOWN_ERROR); - } - - if (respR1 & SD_OCR_STREAM_READ_UNDERRUN) - { - return(SD_STREAM_READ_UNDERRUN); - } - - if (respR1 & SD_OCR_STREAM_WRITE_OVERRUN) - { - return(SD_STREAM_WRITE_OVERRUN); - } - - if (respR1 & SD_OCR_CID_CSD_OVERWRIETE) - { - return(SD_CID_CSD_OVERWRITE); - } - - if (respR1 & SD_OCR_WP_ERASE_SKIP) - { - return(SD_WP_ERASE_SKIP); - } - - if (respR1 & SD_OCR_CARD_ECC_DISABLED) - { - return(SD_CARD_ECC_DISABLED); - } - - if (respR1 & SD_OCR_ERASE_RESET) - { - return(SD_ERASE_RESET); - } - - if (respR1 & SD_OCR_AKE_SEQ_ERROR) - { - return(SD_AKE_SEQ_ERROR); - } - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : FindSCR -* Description : Find the SD card SCR register value. -* Input : - rca: selected card address. -* - pscr: pointer to the buffer that will contain the SCR value. -* Output : None -* Return : SD_Error: SD Card Error code. -*******************************************************************************/ -static SD_Error FindSCR(u16 rca, u32 *pscr) -{ - u32 index = 0; - SD_Error errorstatus = SD_OK; - u32 tempscr[2] = {0, 0}; - - /* Set Block Size To 8 Bytes */ - /* Send CMD55 APP_CMD with argument as card's RCA */ - SDIO_CmdInitStructure.SDIO_Argument = (u32)8; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SET_BLOCKLEN; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SET_BLOCKLEN); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - /* Send CMD55 APP_CMD with argument as card's RCA */ - SDIO_CmdInitStructure.SDIO_Argument = (u32) RCA << 16; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_APP_CMD; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_APP_CMD); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - SDIO_DataInitStructure.SDIO_DataTimeOut = SD_DATATIMEOUT; - SDIO_DataInitStructure.SDIO_DataLength = 8; - SDIO_DataInitStructure.SDIO_DataBlockSize = SDIO_DataBlockSize_8b; - SDIO_DataInitStructure.SDIO_TransferDir = SDIO_TransferDir_ToSDIO; - SDIO_DataInitStructure.SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStructure.SDIO_DPSM = SDIO_DPSM_Enable; - SDIO_DataConfig(&SDIO_DataInitStructure); - - - /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */ - SDIO_CmdInitStructure.SDIO_Argument = 0x0; - SDIO_CmdInitStructure.SDIO_CmdIndex = SDIO_SD_APP_SEND_SCR; - SDIO_CmdInitStructure.SDIO_Response = SDIO_Response_Short; - SDIO_CmdInitStructure.SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStructure.SDIO_CPSM = SDIO_CPSM_Enable; - SDIO_SendCommand(&SDIO_CmdInitStructure); - - errorstatus = CmdResp1Error(SDIO_SD_APP_SEND_SCR); - - if (errorstatus != SD_OK) - { - return(errorstatus); - } - - while (!(SDIO->STA & (SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))) - { - if (SDIO_GetFlagStatus(SDIO_FLAG_RXDAVL) != RESET) - { - *(tempscr + index) = SDIO_ReadData(); - index++; - } - } - - if (SDIO_GetFlagStatus(SDIO_FLAG_DTIMEOUT) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DTIMEOUT); - errorstatus = SD_DATA_TIMEOUT; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_DCRCFAIL) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_DCRCFAIL); - errorstatus = SD_DATA_CRC_FAIL; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_RXOVERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_RXOVERR); - errorstatus = SD_RX_OVERRUN; - return(errorstatus); - } - else if (SDIO_GetFlagStatus(SDIO_FLAG_STBITERR) != RESET) - { - SDIO_ClearFlag(SDIO_FLAG_STBITERR); - errorstatus = SD_START_BIT_ERR; - return(errorstatus); - } - - /* Clear all the static flags */ - SDIO_ClearFlag(SDIO_STATIC_FLAGS); - - *(pscr + 1) = ((tempscr[0] & SD_0TO7BITS) << 24) | ((tempscr[0] & SD_8TO15BITS) << 8) | ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24); - - *(pscr) = ((tempscr[1] & SD_0TO7BITS) << 24) | ((tempscr[1] & SD_8TO15BITS) << 8) | ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24); - - return(errorstatus); -} - -/******************************************************************************* -* Function Name : convert_from_bytes_to_power_of_two -* Description : Converts the number of bytes in power of two and returns the -* power. -* Input : NumberOfBytes: number of bytes. -* Output : None -* Return : None -*******************************************************************************/ -static u8 convert_from_bytes_to_power_of_two(u16 NumberOfBytes) -{ - u8 count = 0; - - while (NumberOfBytes != 1) - { - NumberOfBytes >>= 1; - count++; - } - return(count); -} - -/******************************************************************************* -* Function Name : GPIO_Configuration -* Description : Configures the SDIO Corresponding GPIO Ports -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -static void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - - /* GPIOC and GPIOD Periph clock enable */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_GPIOD, ENABLE); - - /* Configure PC.08, PC.09, PC.10, PC.11, PC.12 pin: D0, D1, D2, D3, CLK pin */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(GPIOC, &GPIO_InitStructure); - - /* Configure PD.02 CMD line */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_2; - GPIO_Init(GPIOD, &GPIO_InitStructure); -} - -/******************************************************************************* -* Function Name : DMA_TxConfiguration -* Description : Configures the DMA2 Channel4 for SDIO Tx request. -* Input : - BufferSRC: pointer to the source buffer -* - BufferSize: buffer size -* Output : None -* Return : None -*******************************************************************************/ -static void DMA_TxConfiguration(u32 *BufferSRC, u32 BufferSize) -{ - DMA_InitTypeDef DMA_InitStructure; - - DMA_ClearFlag(DMA2_FLAG_TC4 | DMA2_FLAG_TE4 | DMA2_FLAG_HT4 | DMA2_FLAG_GL4); - - /* DMA2 Channel4 disable */ - DMA_Cmd(DMA2_Channel4, DISABLE); - - /* DMA2 Channel4 Config */ - DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)SDIO_FIFO_Address; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)BufferSRC; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; - DMA_InitStructure.DMA_BufferSize = BufferSize / 4; - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word; - DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - DMA_InitStructure.DMA_Priority = DMA_Priority_High; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; - DMA_Init(DMA2_Channel4, &DMA_InitStructure); - - /* DMA2 Channel4 enable */ - DMA_Cmd(DMA2_Channel4, ENABLE); -} - -/******************************************************************************* -* Function Name : DMA_RxConfiguration -* Description : Configures the DMA2 Channel4 for SDIO Rx request. -* Input : - BufferDST: pointer to the destination buffer -* - BufferSize: buffer size -* Output : None -* Return : None -*******************************************************************************/ -static void DMA_RxConfiguration(u32 *BufferDST, u32 BufferSize) -{ - DMA_InitTypeDef DMA_InitStructure; - - DMA_ClearFlag(DMA2_FLAG_TC4 | DMA2_FLAG_TE4 | DMA2_FLAG_HT4 | DMA2_FLAG_GL4); - - /* DMA2 Channel4 disable */ - DMA_Cmd(DMA2_Channel4, DISABLE); - - /* DMA2 Channel4 Config */ - DMA_InitStructure.DMA_PeripheralBaseAddr = (u32)SDIO_FIFO_Address; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)BufferDST; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC; - DMA_InitStructure.DMA_BufferSize = BufferSize / 4; - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Word; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Word; - DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - DMA_InitStructure.DMA_Priority = DMA_Priority_High; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; - DMA_Init(DMA2_Channel4, &DMA_InitStructure); - - /* DMA2 Channel4 enable */ - DMA_Cmd(DMA2_Channel4, ENABLE); -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ - -/* - * RT-Thread SD Card Driver - * 20090417 Bernard - */ -#include -#include - -struct rt_device sdcard_device; -SD_CardInfo SDCardInfo; -struct dfs_partition part; - -/* RT-Thread Device Driver Interface */ -static rt_err_t rt_sdcard_init(rt_device_t dev) -{ - NVIC_InitTypeDef NVIC_InitStructure; - - NVIC_InitStructure.NVIC_IRQChannel = SDIO_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - return RT_EOK; -} - -static rt_err_t rt_sdcard_open(rt_device_t dev, rt_uint16_t oflag) -{ - - return RT_EOK; -} - -static rt_err_t rt_sdcard_close(rt_device_t dev) -{ - return RT_EOK; -} - -/* set sector size to 512 */ -#define SECTOR_SIZE 512 -static rt_size_t rt_sdcard_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) -{ - SD_Error status; - rt_uint32_t i; - - // rt_kprintf("read: 0x%x, size %d\n", pos, size); - - /* read all sectors */ - for (i = 0; i < size / SECTOR_SIZE; i ++) - { - status = SD_ReadBlock((part.offset + i)* SECTOR_SIZE + pos, - (rt_uint32_t*)((rt_uint8_t*)buffer + i * SECTOR_SIZE), - SECTOR_SIZE); - if (status != SD_OK) - { - rt_kprintf("sd card read failed\n"); - return 0; - } - } - - if (status == SD_OK) return size; - - rt_kprintf("read failed: %d\n", status); - return 0; -} - -static rt_size_t rt_sdcard_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) -{ - SD_Error status; - rt_uint32_t i; - - // rt_kprintf("write: 0x%x, size %d\n", pos, size); - - /* read all sectors */ - for (i = 0; i < size / SECTOR_SIZE; i ++) - { - status = SD_WriteBlock((part.offset + i)* SECTOR_SIZE + pos, - (rt_uint32_t*)((rt_uint8_t*)buffer + i * SECTOR_SIZE), - SECTOR_SIZE); - if (status != SD_OK) - { - rt_kprintf("sd card write failed\n"); - return 0; - } - } - - if (status == SD_OK) return size; - - rt_kprintf("write failed: %d\n", status); - return 0; -} - -static rt_err_t rt_sdcard_control(rt_device_t dev, rt_uint8_t cmd, void *args) -{ - return RT_EOK; -} - -void rt_hw_sdcard_init() -{ - if (SD_Init()) - { - SD_Error status; - rt_uint8_t *sector; - - status = SD_GetCardInfo(&SDCardInfo); - if (status != SD_OK) goto __return; - - status = SD_SelectDeselect((u32) (SDCardInfo.RCA << 16)); - if (status != SD_OK) goto __return; - - SD_EnableWideBusOperation(SDIO_BusWide_4b); - SD_SetDeviceMode(SD_DMA_MODE); - - /* get the first sector to read partition table */ - sector = (rt_uint8_t*) rt_malloc (512); - if (sector == RT_NULL) - { - rt_kprintf("allocate partition sector buffer failed\n"); - return; - } - status = SD_ReadBlock(0, (rt_uint32_t*)sector, 512); - if (status == SD_OK) - { - /* get the first partition */ - if (dfs_filesystem_get_partition(&part, sector, 0) != 0) - { - /* there is no partition */ - part.offset = 0; - part.size = 0; - } - } - else - { - /* there is no partition table */ - part.offset = 0; - part.size = 0; - } - - /* release sector buffer */ - rt_free(sector); - - /* register sdcard device */ - sdcard_device.init = rt_sdcard_init; - sdcard_device.open = rt_sdcard_open; - sdcard_device.close = rt_sdcard_close; - sdcard_device.read = rt_sdcard_read; - sdcard_device.write = rt_sdcard_write; - sdcard_device.control = rt_sdcard_control; - - /* no private */ - sdcard_device.private = RT_NULL; - - rt_device_register(&sdcard_device, "sd0", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE | RT_DEVICE_FLAG_STANDALONE); - - return; - } - -__return: - rt_kprintf("sdcard init failed\n"); -} diff --git a/bsp/stm32/sdcard.h b/bsp/stm32/sdcard.h deleted file mode 100644 index 172fb6579..000000000 --- a/bsp/stm32/sdcard.h +++ /dev/null @@ -1,264 +0,0 @@ - /******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : sdcard.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains all the functions prototypes for the -* SD Card driver firmware library. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __SDCARD_H -#define __SDCARD_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -typedef enum -{ - /* SDIO specific error defines */ - SD_CMD_CRC_FAIL = (1), /* Command response received (but CRC check failed) */ - SD_DATA_CRC_FAIL = (2), /* Data bock sent/received (CRC check Failed) */ - SD_CMD_RSP_TIMEOUT = (3), /* Command response timeout */ - SD_DATA_TIMEOUT = (4), /* Data time out */ - SD_TX_UNDERRUN = (5), /* Transmit FIFO under-run */ - SD_RX_OVERRUN = (6), /* Receive FIFO over-run */ - SD_START_BIT_ERR = (7), /* Start bit not detected on all data signals in widE bus mode */ - SD_CMD_OUT_OF_RANGE = (8), /* CMD's argument was out of range.*/ - SD_ADDR_MISALIGNED = (9), /* Misaligned address */ - SD_BLOCK_LEN_ERR = (10), /* Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ - SD_ERASE_SEQ_ERR = (11), /* An error in the sequence of erase command occurs.*/ - SD_BAD_ERASE_PARAM = (12), /* An Invalid selection for erase groups */ - SD_WRITE_PROT_VIOLATION = (13), /* Attempt to program a write protect block */ - SD_LOCK_UNLOCK_FAILED = (14), /* Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ - SD_COM_CRC_FAILED = (15), /* CRC check of the previous command failed */ - SD_ILLEGAL_CMD = (16), /* Command is not legal for the card state */ - SD_CARD_ECC_FAILED = (17), /* Card internal ECC was applied but failed to correct the data */ - SD_CC_ERROR = (18), /* Internal card controller error */ - SD_GENERAL_UNKNOWN_ERROR = (19), /* General or Unknown error */ - SD_STREAM_READ_UNDERRUN = (20), /* The card could not sustain data transfer in stream read operation. */ - SD_STREAM_WRITE_OVERRUN = (21), /* The card could not sustain data programming in stream mode */ - SD_CID_CSD_OVERWRITE = (22), /* CID/CSD overwrite error */ - SD_WP_ERASE_SKIP = (23), /* only partial address space was erased */ - SD_CARD_ECC_DISABLED = (24), /* Command has been executed without using internal ECC */ - SD_ERASE_RESET = (25), /* Erase sequence was cleared before executing because an out of erase sequence command was received */ - SD_AKE_SEQ_ERROR = (26), /* Error in sequence of authentication. */ - SD_INVALID_VOLTRANGE = (27), - SD_ADDR_OUT_OF_RANGE = (28), - SD_SWITCH_ERROR = (29), - SD_SDIO_DISABLED = (30), - SD_SDIO_FUNCTION_BUSY = (31), - SD_SDIO_FUNCTION_FAILED = (32), - SD_SDIO_UNKNOWN_FUNCTION = (33), - - /* Standard error defines */ - SD_INTERNAL_ERROR, - SD_NOT_CONFIGURED, - SD_REQUEST_PENDING, - SD_REQUEST_NOT_APPLICABLE, - SD_INVALID_PARAMETER, - SD_UNSUPPORTED_FEATURE, - SD_UNSUPPORTED_HW, - SD_ERROR, - SD_OK, -} SD_Error; - -/* SDIO Commands Index */ -#define SDIO_GO_IDLE_STATE ((u8)0) -#define SDIO_SEND_OP_COND ((u8)1) -#define SDIO_ALL_SEND_CID ((u8)2) -#define SDIO_SET_REL_ADDR ((u8)3) /* SDIO_SEND_REL_ADDR for SD Card */ -#define SDIO_SET_DSR ((u8)4) -#define SDIO_SDIO_SEN_OP_COND ((u8)5) -#define SDIO_HS_SWITCH ((u8)6) -#define SDIO_SEL_DESEL_CARD ((u8)7) -#define SDIO_HS_SEND_EXT_CSD ((u8)8) -#define SDIO_SEND_CSD ((u8)9) -#define SDIO_SEND_CID ((u8)10) -#define SDIO_READ_DAT_UNTIL_STOP ((u8)11) /* SD Card doesn't support it */ -#define SDIO_STOP_TRANSMISSION ((u8)12) -#define SDIO_SEND_STATUS ((u8)13) -#define SDIO_HS_BUSTEST_READ ((u8)14) -#define SDIO_GO_INACTIVE_STATE ((u8)15) -#define SDIO_SET_BLOCKLEN ((u8)16) -#define SDIO_READ_SINGLE_BLOCK ((u8)17) -#define SDIO_READ_MULT_BLOCK ((u8)18) -#define SDIO_HS_BUSTEST_WRITE ((u8)19) -#define SDIO_WRITE_DAT_UNTIL_STOP ((u8)20) /* SD Card doesn't support it */ -#define SDIO_SET_BLOCK_COUNT ((u8)23) /* SD Card doesn't support it */ -#define SDIO_WRITE_SINGLE_BLOCK ((u8)24) -#define SDIO_WRITE_MULT_BLOCK ((u8)25) -#define SDIO_PROG_CID ((u8)26) /* reserved for manufacturers */ -#define SDIO_PROG_CSD ((u8)27) -#define SDIO_SET_WRITE_PROT ((u8)28) -#define SDIO_CLR_WRITE_PROT ((u8)29) -#define SDIO_SEND_WRITE_PROT ((u8)30) -#define SDIO_SD_ERASE_GRP_START ((u8)32) /* To set the address of the first write - block to be erased. (For SD card only) */ -#define SDIO_SD_ERASE_GRP_END ((u8)33) /* To set the address of the last write block of the - continuous range to be erased. (For SD card only) */ -#define SDIO_ERASE_GRP_START ((u8)35) /* To set the address of the first write block to be erased. - (For MMC card only spec 3.31) */ - -#define SDIO_ERASE_GRP_END ((u8)36) /* To set the address of the last write block of the - continuous range to be erased. (For MMC card only spec 3.31) */ - -#define SDIO_ERASE ((u8)38) -#define SDIO_FAST_IO ((u8)39) /* SD Card doesn't support it */ -#define SDIO_GO_IRQ_STATE ((u8)40) /* SD Card doesn't support it */ -#define SDIO_LOCK_UNLOCK ((u8)42) -#define SDIO_APP_CMD ((u8)55) -#define SDIO_GEN_CMD ((u8)56) -#define SDIO_NO_CMD ((u8)64) - -/* Following commands are SD Card Specific commands. - SDIO_APP_CMD should be sent before sending these - commands. */ -#define SDIO_APP_SD_SET_BUSWIDTH ((u8)6) /* For SD Card only */ -#define SDIO_SD_APP_STAUS ((u8)13) /* For SD Card only */ -#define SDIO_SD_APP_SEND_NUM_WRITE_BLOCKS ((u8)22) /* For SD Card only */ -#define SDIO_SD_APP_OP_COND ((u8)41) /* For SD Card only */ -#define SDIO_SD_APP_SET_CLR_CARD_DETECT ((u8)42) /* For SD Card only */ -#define SDIO_SD_APP_SEND_SCR ((u8)51) /* For SD Card only */ -#define SDIO_SDIO_RW_DIRECT ((u8)52) /* For SD I/O Card only */ -#define SDIO_SDIO_RW_EXTENDED ((u8)53) /* For SD I/O Card only */ - -/* Following commands are SD Card Specific security commands. - SDIO_APP_CMD should be sent before sending these commands. */ -#define SDIO_SD_APP_GET_MKB ((u8)43) /* For SD Card only */ -#define SDIO_SD_APP_GET_MID ((u8)44) /* For SD Card only */ -#define SDIO_SD_APP_SET_CER_RN1 ((u8)45) /* For SD Card only */ -#define SDIO_SD_APP_GET_CER_RN2 ((u8)46) /* For SD Card only */ -#define SDIO_SD_APP_SET_CER_RES2 ((u8)47) /* For SD Card only */ -#define SDIO_SD_APP_GET_CER_RES1 ((u8)48) /* For SD Card only */ -#define SDIO_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((u8)18) /* For SD Card only */ -#define SDIO_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((u8)25) /* For SD Card only */ -#define SDIO_SD_APP_SECURE_ERASE ((u8)38) /* For SD Card only */ -#define SDIO_SD_APP_CHANGE_SECURE_AREA ((u8)49) /* For SD Card only */ -#define SDIO_SD_APP_SECURE_WRITE_MKB ((u8)48) /* For SD Card only */ - -typedef enum -{ - SD_NO_TRANSFER = 0, - SD_TRANSFER_IN_PROGRESS -} SDTransferState; - -typedef struct -{ - u16 TransferredBytes; - SD_Error TransferError; - u8 padding; -} SDLastTransferInfo; - -typedef struct /* Card Specific Data */ -{ - vu8 CSDStruct; /* CSD structure */ - vu8 SysSpecVersion; /* System specification version */ - vu8 Reserved1; /* Reserved */ - vu8 TAAC; /* Data read access-time 1 */ - vu8 NSAC; /* Data read access-time 2 in CLK cycles */ - vu8 MaxBusClkFrec; /* Max. bus clock frequency */ - vu16 CardComdClasses; /* Card command classes */ - vu8 RdBlockLen; /* Max. read data block length */ - vu8 PartBlockRead; /* Partial blocks for read allowed */ - vu8 WrBlockMisalign; /* Write block misalignment */ - vu8 RdBlockMisalign; /* Read block misalignment */ - vu8 DSRImpl; /* DSR implemented */ - vu8 Reserved2; /* Reserved */ - vu32 DeviceSize; /* Device Size */ - vu8 MaxRdCurrentVDDMin; /* Max. read current @ VDD min */ - vu8 MaxRdCurrentVDDMax; /* Max. read current @ VDD max */ - vu8 MaxWrCurrentVDDMin; /* Max. write current @ VDD min */ - vu8 MaxWrCurrentVDDMax; /* Max. write current @ VDD max */ - vu8 DeviceSizeMul; /* Device size multiplier */ - vu8 EraseGrSize; /* Erase group size */ - vu8 EraseGrMul; /* Erase group size multiplier */ - vu8 WrProtectGrSize; /* Write protect group size */ - vu8 WrProtectGrEnable; /* Write protect group enable */ - vu8 ManDeflECC; /* Manufacturer default ECC */ - vu8 WrSpeedFact; /* Write speed factor */ - vu8 MaxWrBlockLen; /* Max. write data block length */ - vu8 WriteBlockPaPartial; /* Partial blocks for write allowed */ - vu8 Reserved3; /* Reserded */ - vu8 ContentProtectAppli; /* Content protection application */ - vu8 FileFormatGrouop; /* File format group */ - vu8 CopyFlag; /* Copy flag (OTP) */ - vu8 PermWrProtect; /* Permanent write protection */ - vu8 TempWrProtect; /* Temporary write protection */ - vu8 FileFormat; /* File Format */ - vu8 ECC; /* ECC code */ - vu8 CSD_CRC; /* CSD CRC */ - vu8 Reserved4; /* always 1*/ -} SD_CSD; - -typedef struct /*Card Identification Data*/ -{ - vu8 ManufacturerID; /* ManufacturerID */ - vu16 OEM_AppliID; /* OEM/Application ID */ - vu32 ProdName1; /* Product Name part1 */ - vu8 ProdName2; /* Product Name part2*/ - vu8 ProdRev; /* Product Revision */ - vu32 ProdSN; /* Product Serial Number */ - vu8 Reserved1; /* Reserved1 */ - vu16 ManufactDate; /* Manufacturing Date */ - vu8 CID_CRC; /* CID CRC */ - vu8 Reserved2; /* always 1 */ -} SD_CID; - -typedef struct -{ - SD_CSD SD_csd; - SD_CID SD_cid; - u32 CardCapacity; /* Card Capacity */ - u32 CardBlockSize; /* Card Block Size */ - u16 RCA; - u8 CardType; -} SD_CardInfo; - -/* Exported constants --------------------------------------------------------*/ -#define SD_DMA_MODE ((u32)0x00000000) -#define SD_INTERRUPT_MODE ((u32)0x00000001) -#define SD_POLLING_MODE ((u32)0x00000002) - -/* Supported Memory Cards */ -#define SDIO_STD_CAPACITY_SD_CARD_V1_1 ((u32)0x0) -#define SDIO_STD_CAPACITY_SD_CARD_V2_0 ((u32)0x1) -#define SDIO_HIGH_CAPACITY_SD_CARD ((u32)0x2) -#define SDIO_MULTIMEDIA_CARD ((u32)0x3) -#define SDIO_SECURE_DIGITAL_IO_CARD ((u32)0x4) -#define SDIO_HIGH_SPEED_MULTIMEDIA_CARD ((u32)0x5) -#define SDIO_SECURE_DIGITAL_IO_COMBO_CARD ((u32)0x6) -#define SDIO_HIGH_CAPACITY_MMC_CARD ((u32)0x7) - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ -SD_Error SD_Init(void); -SD_Error SD_PowerON(void); -SD_Error SD_PowerOFF(void); -SD_Error SD_InitializeCards(void); -SD_Error SD_GetCardInfo(SD_CardInfo *cardinfo); -SD_Error SD_EnableWideBusOperation(u32 WideMode); -SD_Error SD_SetDeviceMode(u32 Mode); -SD_Error SD_SelectDeselect(u32 addr); -SD_Error SD_ReadBlock(u32 addr, u32 *readbuff, u16 BlockSize); -SD_Error SD_ReadMultiBlocks(u32 addr, u32 *readbuff, u16 BlockSize, u32 NumberOfBlocks); -SD_Error SD_WriteBlock(u32 addr, u32 *writebuff, u16 BlockSize); -SD_Error SD_WriteMultiBlocks(u32 addr, u32 *writebuff, u16 BlockSize, u32 NumberOfBlocks); -SDTransferState SD_GetTransferState(void); -SD_Error SD_StopTransfer(void); -SD_Error SD_Erase(u32 startaddr, u32 endaddr); -SD_Error SD_SendStatus(u32 *pcardstatus); -SD_Error SD_SendSDStatus(u32 *psdstatus); -SD_Error SD_ProcessIRQSrc(void); - -#endif /* __SDCARD_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/startup.c b/bsp/stm32/startup.c deleted file mode 100644 index e1caec079..000000000 --- a/bsp/stm32/startup.c +++ /dev/null @@ -1,150 +0,0 @@ -/* - * File : startup.c - * This file is part of RT-Thread RTOS - * COPYRIGHT (C) 2006, RT-Thread Develop Team - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://openlab.rt-thread.com/license/LICENSE - * - * Change Logs: - * Date Author Notes - * 2006-08-31 Bernard first implementation - */ - -#include -#include - -#include "board.h" -#include "rtc.h" - -#ifdef RT_USING_LWIP -#include -#include "enc28j60.h" -#endif - -/** - * @addtogroup STM32 - */ - -/*@{*/ -#ifdef RT_USING_FINSH -extern void finsh_system_init(void); -extern void finsh_set_device(char* device); -#endif - -extern int rt_application_init(void); - -#ifdef __CC_ARM -extern int Image$$RW_IRAM1$$ZI$$Limit; -#elif __ICCARM__ -#pragma section="HEAP" -#else -extern int __bss_end; -#endif - -#ifdef DEBUG -/******************************************************************************* -* Function Name : assert_failed -* Description : Reports the name of the source file and the source line number -* where the assert error has occurred. -* Input : - file: pointer to the source file name -* - line: assert error line source number -* Output : None -* Return : None -*******************************************************************************/ -void assert_failed(u8* file, u32 line) -{ - rt_kprintf("\n\r Wrong parameter value detected on\r\n"); - rt_kprintf(" file %s\r\n", file); - rt_kprintf(" line %d\r\n", line); - - while (1) ; -} -#endif - -/** - * This function will startup RT-Thread RTOS. - */ -void rtthread_startup(void) -{ - /* init board */ - rt_hw_board_init(); - - /* show version */ - rt_show_version(); - - /* init tick */ - rt_system_tick_init(); - - /* init kernel object */ - rt_system_object_init(); - - /* init timer system */ - rt_system_timer_init(); - -#ifdef RT_USING_HEAP -#ifdef __CC_ARM - rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x20010000); -#elif __ICCARM__ - rt_system_heap_init(__segment_end("HEAP"), (void*)0x20010000); -#else - /* init memory system */ - rt_system_heap_init((void*)&__bss_end, (void*)0x20010000); -#endif -#endif - - /* init scheduler system */ - rt_system_scheduler_init(); - -#ifdef RT_USING_LWIP - eth_system_device_init(); - - /* register ethernetif device */ - rt_hw_enc28j60_init(); -#endif - - rt_hw_rtc_init(); - - /* init hardware serial device */ - rt_hw_usart_init(); -#ifdef RT_USING_DFS - rt_hw_sdcard_init(); -#endif - - /* init all device */ - rt_device_init_all(); - - /* init application */ - rt_application_init(); - -#ifdef RT_USING_FINSH - /* init finsh */ - finsh_system_init(); -#ifdef RT_USING_DEVICE - finsh_set_device("uart1"); -#endif -#endif - - /* init idle thread */ - rt_thread_idle_init(); - - /* start scheduler */ - rt_system_scheduler_start(); - - /* never reach here */ - return ; -} - -int main(void) -{ - rt_uint32_t UNUSED level; - - /* disable interrupt first */ - level = rt_hw_interrupt_disable(); - rtthread_startup(); - - return 0; -} - -/*@}*/ diff --git a/bsp/stm32/stm32f10x.h b/bsp/stm32/stm32f10x.h deleted file mode 100644 index 7460805ec..000000000 --- a/bsp/stm32/stm32f10x.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __STM32F10X_H__ -#define __STM32F10X_H__ - -#include - -#endif diff --git a/bsp/stm32/stm32f10x_conf.h b/bsp/stm32/stm32f10x_conf.h deleted file mode 100644 index f62bb06cd..000000000 --- a/bsp/stm32/stm32f10x_conf.h +++ /dev/null @@ -1,174 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_conf.h -* Author : MCD Application Team -* Version : V1.1.2 -* Date : 09/22/2008 -* Description : Library configuration file. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_type.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to compile the library in DEBUG mode, this will expanse - the "assert_param" macro in the firmware library code (see "Exported macro" - section below) */ -/* #define DEBUG 1*/ - -/* Comment the line below to disable the specific peripheral inclusion */ -/************************************* ADC ************************************/ -#define _ADC -#define _ADC1 -#define _ADC2 -#define _ADC3 - -/************************************* BKP ************************************/ -#define _BKP - -/************************************* CAN ************************************/ -#define _CAN - -/************************************* CRC ************************************/ -#define _CRC - -/************************************* DAC ************************************/ -#define _DAC - -/************************************* DBGMCU *********************************/ -#define _DBGMCU - -/************************************* DMA ************************************/ -#define _DMA -#define _DMA1_Channel1 -#define _DMA1_Channel2 -#define _DMA1_Channel3 -#define _DMA1_Channel4 -#define _DMA1_Channel5 -#define _DMA1_Channel6 -#define _DMA1_Channel7 -#define _DMA2_Channel1 -#define _DMA2_Channel2 -#define _DMA2_Channel3 -#define _DMA2_Channel4 -#define _DMA2_Channel5 - -/************************************* EXTI ***********************************/ -#define _EXTI - -/************************************* FLASH and Option Bytes *****************/ -#define _FLASH -/* Uncomment the line below to enable FLASH program/erase/protections functions, - otherwise only FLASH configuration (latency, prefetch, half cycle) functions - are enabled */ -/* #define _FLASH_PROG */ - -/************************************* FSMC ***********************************/ -#define _FSMC - -/************************************* GPIO ***********************************/ -#define _GPIO -#define _GPIOA -#define _GPIOB -#define _GPIOC -#define _GPIOD -#define _GPIOE -#define _GPIOF -#define _GPIOG -#define _AFIO - -/************************************* I2C ************************************/ -#define _I2C -#define _I2C1 -#define _I2C2 - -/************************************* IWDG ***********************************/ -#define _IWDG - -/************************************* NVIC ***********************************/ -#define _NVIC - -/************************************* PWR ************************************/ -#define _PWR - -/************************************* RCC ************************************/ -#define _RCC - -/************************************* RTC ************************************/ -#define _RTC - -/************************************* SDIO ***********************************/ -#define _SDIO - -/************************************* SPI ************************************/ -#define _SPI -#define _SPI1 -#define _SPI2 -#define _SPI3 - -/************************************* SysTick ********************************/ -#define _SysTick - -/************************************* TIM ************************************/ -#define _TIM -#define _TIM1 -#define _TIM2 -#define _TIM3 -#define _TIM4 -#define _TIM5 -#define _TIM6 -#define _TIM7 -#define _TIM8 - -/************************************* USART **********************************/ -#define _USART -#define _USART1 -#define _USART2 -#define _USART3 -#define _UART4 -#define _UART5 - -/************************************* WWDG ***********************************/ -#define _WWDG - -/* In the following line adjust the value of External High Speed oscillator (HSE) - used in your application */ -#define HSE_Value ((u32)8000000) /* Value of the External oscillator in Hz*/ - -/* In the following line adjust the External High Speed oscillator (HSE) Startup - Timeout value */ -#define HSEStartUp_TimeOut ((u16)0x0500) /* Time out for HSE start up */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef DEBUG -/******************************************************************************* -* Macro Name : assert_param -* Description : The assert_param macro is used for function's parameters check. -* It is used only if the library is compiled in DEBUG mode. -* Input : - expr: If expr is false, it calls assert_failed function -* which reports the name of the source file and the source -* line number of the call that failed. -* If expr is true, it returns no value. -* Return : None -*******************************************************************************/ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((u8 *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(u8* file, u32 line); -#else - #define assert_param(expr) ((void)0) -#endif /* DEBUG */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f10x_flash.icf b/bsp/stm32/stm32f10x_flash.icf deleted file mode 100644 index f98793b6e..000000000 --- a/bsp/stm32/stm32f10x_flash.icf +++ /dev/null @@ -1,32 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0807FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2000FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x200; -define symbol __ICFEDIT_size_heap__ = 0x000; -/**** End of ICF editor section. ###ICF###*/ - - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ { }; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ { }; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -keep { section FSymTab }; -keep { section VSymTab }; -place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec }; - -place in ROM_region { readonly }; -place in RAM_region { readwrite, block CSTACK, last block HEAP}; diff --git a/bsp/stm32/stm32f10x_it.c b/bsp/stm32/stm32f10x_it.c deleted file mode 100644 index f5be3e878..000000000 --- a/bsp/stm32/stm32f10x_it.c +++ /dev/null @@ -1,953 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.c -* Author : MCD Application Team -* Version : V1.1.2 -* Date : 09/22/2008 -* Description : Main Interrupt Service Routines. -* This file provides template for all exceptions handler -* and peripherals interrupt service routine. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" -#include -#include - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -extern void rt_hw_timer_handler(void); -extern void rt_hw_interrupt_thread_switch(void); - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - rt_kprintf("hard fault exception\n"); - while (1) - { - } -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - rt_kprintf("memory manage exception\n"); - while (1) - { - } -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - rt_kprintf("bus fault exception\n"); - while (1) - { - } -} - -/******************************************************************************* -* Function Name : UsageFaultException -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - rt_kprintf("usage fault exception\n"); - while (1) - { - } -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SysTickHandler(void) -{ - /* handle os tick */ - rt_hw_timer_handler(); -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ - if (RTC_GetITStatus(RTC_IT_SEC) != RESET) - { - /* Clear the RTC Second interrupt */ - RTC_ClearITPendingBit(RTC_IT_SEC); - - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - - /* Reset RTC Counter when Time is 23:59:59 */ - if (RTC_GetCounter() == 0x00015180) - { - RTC_SetCounter(0x0); - /* Wait until last write operation on RTC registers has finished */ - RTC_WaitForLastTask(); - } - } -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ - extern void enc28j60_isr(void); - - /* enter interrupt */ - rt_interrupt_enter(); - - enc28j60_isr(); - - /* Clear the Key Button EXTI line pending bit */ - EXTI_ClearITPendingBit(EXTI_Line0); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -#ifdef RT_USING_UART3 - extern struct rt_device uart3_device; - - /* enter interrupt */ - rt_interrupt_enter(); - - if (DMA_GetITStatus(DMA1_IT_TC2)) - { - /* transmission complete, invoke serial dma tx isr */ - rt_hw_serial_dma_tx_isr(&uart3_device); - } - - /* clear DMA flag */ - DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -#endif -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -#ifdef RT_USING_UART2 - extern struct rt_device uart2_device; - - /* enter interrupt */ - rt_interrupt_enter(); - - /* clear DMA flag */ - DMA_ClearFlag(DMA1_FLAG_TC6 | DMA1_FLAG_TE6); - rt_hw_serial_dma_rx_isr(&uart2_device); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -#endif -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_HP_CAN1_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN1_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN1_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN1_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN1_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN1_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN1_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN1_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -#ifdef RT_USING_UART1 - extern struct rt_device uart1_device; - /* enter interrupt */ - rt_interrupt_enter(); - - rt_hw_serial_isr(&uart1_device); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -#endif -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -#ifdef RT_USING_UART2 - extern struct rt_device uart2_device; - - /* enter interrupt */ - rt_interrupt_enter(); - - rt_hw_serial_isr(&uart2_device); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -#endif -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -#ifdef RT_USING_UART3 - extern struct rt_device uart3_device; - - /* enter interrupt */ - rt_interrupt_enter(); - - rt_hw_serial_isr(&uart3_device); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -#endif -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -#ifdef RT_USING_DFS - extern int SD_ProcessIRQSrc(void); - - /* enter interrupt */ - rt_interrupt_enter(); - - /* Process All SDIO Interrupt Sources */ - SD_ProcessIRQSrc(); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -#endif -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - - -void DMA2_Channel5_IRQHandler(void) -{ -} - -void ETH_IRQHandler(void) -{ -} - -void ETH_WKUP_IRQHandler(void) -{ -} - -void CAN2_TX_IRQHandler(void) -{ -} - -void CAN2_RX0_IRQHandler(void) -{ -} - -void CAN2_RX1_IRQHandler(void) -{ -} - -void CAN2_SCE_IRQHandler(void) -{ -} - -void OTG_FS_IRQHandler(void) -{ -} - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/stm32f10x_it.h b/bsp/stm32/stm32f10x_it.h deleted file mode 100644 index bb7c9d06a..000000000 --- a/bsp/stm32/stm32f10x_it.h +++ /dev/null @@ -1,110 +0,0 @@ -/******************** (C) COPYRIGHT 2008 STMicroelectronics ******************** -* File Name : stm32f10x_it.h -* Author : MCD Application Team -* Version : V2.0.3 -* Date : 09/22/2008 -* Description : This file contains the headers of the interrupt handlers. -******************************************************************************** -* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -*******************************************************************************/ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_lib.h" - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions ------------------------------------------------------- */ - -void NMIException(void); -void HardFaultException(void); -void MemManageException(void); -void BusFaultException(void); -void UsageFaultException(void); -void DebugMonitor(void); -void SVCHandler(void); -void rt_hw_pend_sv(void); -void SysTickHandler(void); -void WWDG_IRQHandler(void); -void PVD_IRQHandler(void); -void TAMPER_IRQHandler(void); -void RTC_IRQHandler(void); -void FLASH_IRQHandler(void); -void RCC_IRQHandler(void); -void EXTI0_IRQHandler(void); -void EXTI1_IRQHandler(void); -void EXTI2_IRQHandler(void); -void EXTI3_IRQHandler(void); -void EXTI4_IRQHandler(void); -void DMA1_Channel1_IRQHandler(void); -void DMA1_Channel2_IRQHandler(void); -void DMA1_Channel3_IRQHandler(void); -void DMA1_Channel4_IRQHandler(void); -void DMA1_Channel5_IRQHandler(void); -void DMA1_Channel6_IRQHandler(void); -void DMA1_Channel7_IRQHandler(void); -void ADC1_2_IRQHandler(void); -void USB_HP_CAN1_TX_IRQHandler(void); -void USB_LP_CAN1_RX0_IRQHandler(void); -void CAN1_RX1_IRQHandler(void); -void CAN1_SCE_IRQHandler(void); -void EXTI9_5_IRQHandler(void); -void TIM1_BRK_IRQHandler(void); -void TIM1_UP_IRQHandler(void); -void TIM1_TRG_COM_IRQHandler(void); -void TIM1_CC_IRQHandler(void); -void TIM2_IRQHandler(void); -void TIM3_IRQHandler(void); -void TIM4_IRQHandler(void); -void I2C1_EV_IRQHandler(void); -void I2C1_ER_IRQHandler(void); -void I2C2_EV_IRQHandler(void); -void I2C2_ER_IRQHandler(void); -void SPI1_IRQHandler(void); -void SPI2_IRQHandler(void); -void USART1_IRQHandler(void); -void USART2_IRQHandler(void); -void USART3_IRQHandler(void); -void EXTI15_10_IRQHandler(void); -void RTCAlarm_IRQHandler(void); -void USBWakeUp_IRQHandler(void); -/****** HD ******/ -void TIM8_BRK_IRQHandler(void); -void TIM8_UP_IRQHandler(void); -void TIM8_TRG_COM_IRQHandler(void); -void TIM8_CC_IRQHandler(void); -void ADC3_IRQHandler(void); -void FSMC_IRQHandler(void); -void SDIO_IRQHandler(void); -void TIM5_IRQHandler(void); -void SPI3_IRQHandler(void); -void UART4_IRQHandler(void); -void UART5_IRQHandler(void); -void TIM6_IRQHandler(void); -void TIM7_IRQHandler(void); -void DMA2_Channel1_IRQHandler(void); -void DMA2_Channel2_IRQHandler(void); -void DMA2_Channel3_IRQHandler(void); -void DMA2_Channel4_5_IRQHandler(void); -/********* CL **********/ -void DMA2_Channel5_IRQHandler(void); -void ETH_IRQHandler(void); -void ETH_WKUP_IRQHandler(void); -void CAN2_TX_IRQHandler(void); -void CAN2_RX0_IRQHandler(void); -void CAN2_RX1_IRQHandler(void); -void CAN2_SCE_IRQHandler(void); -void OTG_FS_IRQHandler(void); - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32/usart.c b/bsp/stm32/usart.c deleted file mode 100644 index 5a87dd427..000000000 --- a/bsp/stm32/usart.c +++ /dev/null @@ -1,341 +0,0 @@ -#include "usart.h" -#include - -#include -#include - -/* - * Use UART1 as console output and finsh input - * interrupt Rx and poll Tx (stream mode) - * - * Use UART2 with DMA Rx and poll Tx -- DMA channel 6 - * Use UART3 with DMA Tx and interrupt Rx -- DMA channel 2 - * - * USART DMA setting on STM32 - * USART1 Tx --> DMA Channel 4 - * USART1 Rx --> DMA Channel 5 - * USART2 Tx --> DMA Channel 7 - * USART2 Rx --> DMA Channel 6 - * USART3 Tx --> DMA Channel 2 - * USART3 Rx --> DMA Channel 3 - */ - -#ifdef RT_USING_UART1 -struct stm32_serial_int_rx uart1_int_rx; -struct stm32_serial_device uart1 = -{ - USART1, - &uart1_int_rx, - RT_NULL, - RT_NULL, - RT_NULL -}; -struct rt_device uart1_device; -#endif - -#ifdef RT_USING_UART2 -struct stm32_serial_int_rx uart2_int_rx; -struct stm32_serial_dma_rx uart2_dma_rx; -struct stm32_serial_device uart2 = -{ - USART2, - &uart2_int_rx, - &uart2_dma_rx, - RT_NULL, - RT_NULL -}; -struct rt_device uart2_device; -#endif - -#ifdef RT_USING_UART3 -struct stm32_serial_int_rx uart3_int_rx; -struct stm32_serial_dma_tx uart3_dma_tx; -struct stm32_serial_device uart3 = -{ - USART3, - &uart3_int_rx, - RT_NULL, - RT_NULL, - &uart3_dma_tx -}; -struct rt_device uart3_device; -#endif - -#define USART1_DR_Base 0x40013804 -#define USART2_DR_Base 0x40004404 -#define USART3_DR_Base 0x40004804 - -/* USART1_REMAP = 0 */ -#define UART1_GPIO_TX GPIO_Pin_9 -#define UART1_GPIO_RX GPIO_Pin_10 -#define UART1_GPIO GPIOA -#define RCC_APBPeriph_UART1 RCC_APB2Periph_USART1 -#define UART1_TX_DMA DMA1_Channel4 -#define UART1_RX_DMA DMA1_Channel5 - -/* USART2_REMAP = 0 */ -#define UART2_GPIO_TX GPIO_Pin_2 -#define UART2_GPIO_RX GPIO_Pin_3 -#define UART2_GPIO GPIOA -#define RCC_APBPeriph_UART2 RCC_APB1Periph_USART2 -#define UART2_TX_DMA DMA1_Channel7 -#define UART2_RX_DMA DMA1_Channel6 - -/* USART3_REMAP[1:0] = 00 */ -#define UART3_GPIO_RX GPIO_Pin_11 -#define UART3_GPIO_TX GPIO_Pin_10 -#define UART3_GPIO GPIOB -#define RCC_APBPeriph_UART3 RCC_APB1Periph_USART3 -#define UART3_TX_DMA DMA1_Channel2 -#define UART3_RX_DMA DMA1_Channel3 - -static void RCC_Configuration(void) -{ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_AFIO, ENABLE); - -#ifdef RT_USING_UART1 - /* Enable USART1 and GPIOA clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); -#endif - -#ifdef RT_USING_UART2 - /* Enable GPIOD clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD, ENABLE); - /* Enable USART2 clock */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART2, ENABLE); -#endif - -#ifdef RT_USING_UART3 - RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE); - /* Enable USART3 clock */ - RCC_APB1PeriphClockCmd(RCC_APB1Periph_USART3, ENABLE); -#endif - -#if defined (RT_USING_UART2) || defined (RT_USING_UART3) - /* DMA clock enable */ - RCC_AHBPeriphClockCmd(RCC_AHBPeriph_DMA1, ENABLE); -#endif -} - -static void GPIO_Configuration(void) -{ - GPIO_InitTypeDef GPIO_InitStructure; - -#ifdef RT_USING_UART1 - /* Configure USART1 Rx (PA.10) as input floating */ - GPIO_InitStructure.GPIO_Pin = UART1_GPIO_RX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(UART1_GPIO, &GPIO_InitStructure); - - /* Configure USART1 Tx (PA.09) as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = UART1_GPIO_TX; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_Init(UART1_GPIO, &GPIO_InitStructure); -#endif - -#ifdef RT_USING_UART2 - /* Configure USART2 Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = UART2_GPIO_RX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(UART2_GPIO, &GPIO_InitStructure); - - /* Configure USART2 Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = UART2_GPIO_TX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(UART2_GPIO, &GPIO_InitStructure); -#endif - -#ifdef RT_USING_UART3 - /* Configure USART3 Rx as input floating */ - GPIO_InitStructure.GPIO_Pin = UART3_GPIO_RX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(UART3_GPIO, &GPIO_InitStructure); - - /* Configure USART3 Tx as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = UART3_GPIO_TX; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(UART3_GPIO, &GPIO_InitStructure); -#endif -} - -static void NVIC_Configuration(void) -{ - NVIC_InitTypeDef NVIC_InitStructure; - - /* Configure the NVIC Preemption Priority Bits */ - NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0); - -#ifdef RT_USING_UART1 - /* Enable the USART1 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = USART1_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif - -#ifdef RT_USING_UART2 - /* Enable the USART2 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = USART2_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Enable the DMA1 Channel6 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel6_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif - -#ifdef RT_USING_UART3 - /* Enable the USART3 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = USART3_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); - - /* Enable the DMA1 Channel2 Interrupt */ - NVIC_InitStructure.NVIC_IRQChannel = DMA1_Channel2_IRQChannel; - NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1; - NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; - NVIC_Init(&NVIC_InitStructure); -#endif -} - -static void DMA_Configuration(void) -{ -#if defined(RT_USING_UART2) || defined (RT_USING_UART3) - DMA_InitTypeDef DMA_InitStructure; - - /* fill init structure */ - DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable; - DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable; - DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - DMA_InitStructure.DMA_Mode = DMA_Mode_Normal; - DMA_InitStructure.DMA_Priority = DMA_Priority_VeryHigh; - DMA_InitStructure.DMA_M2M = DMA_M2M_Disable; -#endif - -#ifdef RT_USING_UART2 - /* DMA1 Channel4 (triggered by USART2 Rx event) Config */ - DMA_DeInit(UART2_RX_DMA); - DMA_InitStructure.DMA_PeripheralBaseAddr = USART2_DR_Base; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0; - DMA_InitStructure.DMA_BufferSize = 0; - DMA_Init(UART2_RX_DMA, &DMA_InitStructure); - DMA_ITConfig(UART2_RX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE); - DMA_ClearFlag(DMA1_FLAG_TC4); -#endif - -#ifdef RT_USING_UART3 - /* DMA1 Channel5 (triggered by USART3 Tx event) Config */ - DMA_DeInit(UART3_TX_DMA); - DMA_InitStructure.DMA_PeripheralBaseAddr = USART3_DR_Base; - DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralDST; - DMA_InitStructure.DMA_MemoryBaseAddr = (u32)0; - DMA_InitStructure.DMA_BufferSize = 0; - DMA_Init(UART3_TX_DMA, &DMA_InitStructure); - DMA_ITConfig(UART3_TX_DMA, DMA_IT_TC | DMA_IT_TE, ENABLE); - DMA_ClearFlag(DMA1_FLAG_TC5); -#endif -} - -/* - * Init all related hardware in here - * rt_hw_serial_init() will register all supported USART device - */ -void rt_hw_usart_init() -{ - USART_InitTypeDef USART_InitStructure; - USART_ClockInitTypeDef USART_ClockInitStructure; - - RCC_Configuration(); - - GPIO_Configuration(); - - NVIC_Configuration(); - - DMA_Configuration(); - - /* uart init */ -#ifdef RT_USING_UART1 - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; - USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; - USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; - USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; - USART_Init(USART1, &USART_InitStructure); - USART_ClockInit(USART1, &USART_ClockInitStructure); - - /* register uart1 */ - rt_hw_serial_register(&uart1_device, "uart1", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM, - &uart1); - - /* enable interrupt */ - USART_ITConfig(USART1, USART_IT_RXNE, ENABLE); -#endif - -#ifdef RT_USING_UART2 - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; - USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; - USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; - USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; - USART_Init(USART2, &USART_InitStructure); - USART_ClockInit(USART2, &USART_ClockInitStructure); - - uart2_dma_rx.dma_channel= UART2_RX_DMA; - - /* register uart2 */ - rt_hw_serial_register(&uart2_device, "uart2", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_DMA_RX, - &uart2); - - /* Enable USART2 DMA Rx request */ - USART_DMACmd(USART2, USART_DMAReq_Rx , ENABLE); -#endif - -#ifdef RT_USING_UART3 - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_ClockInitStructure.USART_Clock = USART_Clock_Disable; - USART_ClockInitStructure.USART_CPOL = USART_CPOL_Low; - USART_ClockInitStructure.USART_CPHA = USART_CPHA_2Edge; - USART_ClockInitStructure.USART_LastBit = USART_LastBit_Disable; - USART_Init(USART3, &USART_InitStructure); - USART_ClockInit(USART3, &USART_ClockInitStructure); - - uart3_dma_tx.dma_channel= UART3_TX_DMA; - - /* register uart3 */ - rt_hw_serial_register(&uart3_device, "uart3", - RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_DMA_TX, - &uart3); - - /* Enable USART3 DMA Tx request */ - USART_DMACmd(USART3, USART_DMAReq_Tx , ENABLE); - - /* enable interrupt */ - USART_ITConfig(USART3, USART_IT_RXNE, ENABLE); -#endif -} diff --git a/bsp/stm32/usart.h b/bsp/stm32/usart.h deleted file mode 100644 index ae74ffde7..000000000 --- a/bsp/stm32/usart.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __USART_H__ -#define __USART_H__ - -#include -#include - -void rt_hw_usart_init(void); - -#endif diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.c b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.c deleted file mode 100644 index ea8cb1ac0..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.c +++ /dev/null @@ -1,829 +0,0 @@ -/****************************************************************************** - * @file: core_cm3.c - * @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Source File - * @version: V1.20 - * @date: 22. May 2009 - *---------------------------------------------------------------------------- - * - * Copyright (C) 2009 ARM Limited. All rights reserved. - * - * ARM Limited (ARM) is supplying this software for use with Cortex-Mx - * processor based microcontrollers. This file can be freely distributed - * within development tools that are supporting such ARM based processors. - * - * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED - * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. - * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR - * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. - * - ******************************************************************************/ - - - -#include - - -/* define compiler specific symbols */ -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for armcc */ - #define __INLINE __inline /*!< inline keyword for armcc */ - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for iarcc */ - #define __INLINE inline /*!< inline keyword for iarcc. Only avaiable in High optimization mode! */ - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for gcc */ - #define __INLINE inline /*!< inline keyword for gcc */ - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - -#endif - - - -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ - -/** - * @brief Return the Process Stack Pointer - * - * @param none - * @return uint32_t ProcessStackPointer - * - * Return the actual process stack pointer - */ -__ASM uint32_t __get_PSP(void) -{ - mrs r0, psp - bx lr -} - -/** - * @brief Set the Process Stack Pointer - * - * @param uint32_t Process Stack Pointer - * @return none - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -__ASM void __set_PSP(uint32_t topOfProcStack) -{ - msr psp, r0 - bx lr -} - -/** - * @brief Return the Main Stack Pointer - * - * @param none - * @return uint32_t Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -__ASM uint32_t __get_MSP(void) -{ - mrs r0, msp - bx lr -} - -/** - * @brief Set the Main Stack Pointer - * - * @param uint32_t Main Stack Pointer - * @return none - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -__ASM void __set_MSP(uint32_t mainStackPointer) -{ - msr msp, r0 - bx lr -} - -/** - * @brief Reverse byte order in unsigned short value - * - * @param uint16_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in unsigned short value - */ -__ASM uint32_t __REV16(uint16_t value) -{ - rev16 r0, r0 - bx lr -} - -/** - * @brief Reverse byte order in signed short value with sign extension to integer - * - * @param int16_t value to reverse - * @return int32_t reversed value - * - * Reverse byte order in signed short value with sign extension to integer - */ -__ASM int32_t __REVSH(int16_t value) -{ - revsh r0, r0 - bx lr -} - - -#if (__ARMCC_VERSION < 400000) - -/** - * @brief Remove the exclusive lock created by ldrex - * - * @param none - * @return none - * - * Removes the exclusive lock which is created by ldrex. - */ -__ASM void __CLREX(void) -{ - clrex -} - -/** - * @brief Return the Base Priority value - * - * @param none - * @return uint32_t BasePriority - * - * Return the content of the base priority register - */ -__ASM uint32_t __get_BASEPRI(void) -{ - mrs r0, basepri - bx lr -} - -/** - * @brief Set the Base Priority value - * - * @param uint32_t BasePriority - * @return none - * - * Set the base priority register - */ -__ASM void __set_BASEPRI(uint32_t basePri) -{ - msr basepri, r0 - bx lr -} - -/** - * @brief Return the Priority Mask value - * - * @param none - * @return uint32_t PriMask - * - * Return the state of the priority mask bit from the priority mask - * register - */ -__ASM uint32_t __get_PRIMASK(void) -{ - mrs r0, primask - bx lr -} - -/** - * @brief Set the Priority Mask value - * - * @param uint32_t PriMask - * @return none - * - * Set the priority mask bit in the priority mask register - */ -__ASM void __set_PRIMASK(uint32_t priMask) -{ - msr primask, r0 - bx lr -} - -/** - * @brief Return the Fault Mask value - * - * @param none - * @return uint32_t FaultMask - * - * Return the content of the fault mask register - */ -__ASM uint32_t __get_FAULTMASK(void) -{ - mrs r0, faultmask - bx lr -} - -/** - * @brief Set the Fault Mask value - * - * @param uint32_t faultMask value - * @return none - * - * Set the fault mask register - */ -__ASM void __set_FAULTMASK(uint32_t faultMask) -{ - msr faultmask, r0 - bx lr -} - -/** - * @brief Return the Control Register value - * - * @param none - * @return uint32_t Control value - * - * Return the content of the control register - */ -__ASM uint32_t __get_CONTROL(void) -{ - mrs r0, control - bx lr -} - -/** - * @brief Set the Control Register value - * - * @param uint32_t Control value - * @return none - * - * Set the control register - */ -__ASM void __set_CONTROL(uint32_t control) -{ - msr control, r0 - bx lr -} - -#endif /* __ARMCC_VERSION */ - - -#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ -#pragma diag_suppress=Pe940 - -/** - * @brief Return the Process Stack Pointer - * - * @param none - * @return uint32_t ProcessStackPointer - * - * Return the actual process stack pointer - */ -uint32_t __get_PSP(void) -{ - __ASM("mrs r0, psp"); - __ASM("bx lr"); -} - -/** - * @brief Set the Process Stack Pointer - * - * @param uint32_t Process Stack Pointer - * @return none - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -void __set_PSP(uint32_t topOfProcStack) -{ - __ASM("msr psp, r0"); - __ASM("bx lr"); -} - -/** - * @brief Return the Main Stack Pointer - * - * @param none - * @return uint32_t Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -uint32_t __get_MSP(void) -{ - __ASM("mrs r0, msp"); - __ASM("bx lr"); -} - -/** - * @brief Set the Main Stack Pointer - * - * @param uint32_t Main Stack Pointer - * @return none - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -void __set_MSP(uint32_t topOfMainStack) -{ - __ASM("msr msp, r0"); - __ASM("bx lr"); -} - -/** - * @brief Reverse byte order in unsigned short value - * - * @param uint16_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in unsigned short value - */ -uint32_t __REV16(uint16_t value) -{ - __ASM("rev16 r0, r0"); - __ASM("bx lr"); -} - -/** - * @brief Reverse bit order of value - * - * @param uint32_t value to reverse - * @return uint32_t reversed value - * - * Reverse bit order of value - */ -uint32_t __RBIT(uint32_t value) -{ - __ASM("rbit r0, r0"); - __ASM("bx lr"); -} - -/** - * @brief LDR Exclusive - * - * @param uint8_t* address - * @return uint8_t value of (*address) - * - * Exclusive LDR command - */ -uint8_t __LDREXB(uint8_t *addr) -{ - __ASM("ldrexb r0, [r0]"); - __ASM("bx lr"); -} - -/** - * @brief LDR Exclusive - * - * @param uint16_t* address - * @return uint16_t value of (*address) - * - * Exclusive LDR command - */ -uint16_t __LDREXH(uint16_t *addr) -{ - __ASM("ldrexh r0, [r0]"); - __ASM("bx lr"); -} - -/** - * @brief LDR Exclusive - * - * @param uint32_t* address - * @return uint32_t value of (*address) - * - * Exclusive LDR command - */ -uint32_t __LDREXW(uint32_t *addr) -{ - __ASM("ldrex r0, [r0]"); - __ASM("bx lr"); -} - -/** - * @brief STR Exclusive - * - * @param uint8_t *address - * @param uint8_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -uint32_t __STREXB(uint8_t value, uint8_t *addr) -{ - __ASM("strexb r0, r0, [r1]"); - __ASM("bx lr"); -} - -/** - * @brief STR Exclusive - * - * @param uint16_t *address - * @param uint16_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -uint32_t __STREXH(uint16_t value, uint16_t *addr) -{ - __ASM("strexh r0, r0, [r1]"); - __ASM("bx lr"); -} - -/** - * @brief STR Exclusive - * - * @param uint32_t *address - * @param uint32_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -uint32_t __STREXW(uint32_t value, uint32_t *addr) -{ - __ASM("strex r0, r0, [r1]"); - __ASM("bx lr"); -} - -#pragma diag_default=Pe940 - - -#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ - -/** - * @brief Return the Process Stack Pointer - * - * @param none - * @return uint32_t ProcessStackPointer - * - * Return the actual process stack pointer - */ -uint32_t __get_PSP(void) __attribute__( ( naked ) ); -uint32_t __get_PSP(void) -{ - uint32_t result=0; - - __ASM volatile ("MRS %0, psp\n\t" - "MOV r0, %0 \n\t" - "BX lr \n\t" : "=r" (result) ); - return(result); -} - - -/** - * @brief Set the Process Stack Pointer - * - * @param uint32_t Process Stack Pointer - * @return none - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -void __set_PSP(uint32_t topOfProcStack) __attribute__( ( naked ) ); -void __set_PSP(uint32_t topOfProcStack) -{ - __ASM volatile ("MSR psp, %0\n\t" - "BX lr \n\t" : : "r" (topOfProcStack) ); -} - -/** - * @brief Return the Main Stack Pointer - * - * @param none - * @return uint32_t Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -uint32_t __get_MSP(void) __attribute__( ( naked ) ); -uint32_t __get_MSP(void) -{ - uint32_t result=0; - - __ASM volatile ("MRS %0, msp\n\t" - "MOV r0, %0 \n\t" - "BX lr \n\t" : "=r" (result) ); - return(result); -} - -/** - * @brief Set the Main Stack Pointer - * - * @param uint32_t Main Stack Pointer - * @return none - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -void __set_MSP(uint32_t topOfMainStack) __attribute__( ( naked ) ); -void __set_MSP(uint32_t topOfMainStack) -{ - __ASM volatile ("MSR msp, %0\n\t" - "BX lr \n\t" : : "r" (topOfMainStack) ); -} - -/** - * @brief Return the Base Priority value - * - * @param none - * @return uint32_t BasePriority - * - * Return the content of the base priority register - */ -uint32_t __get_BASEPRI(void) -{ - uint32_t result=0; - - __ASM volatile ("MRS %0, basepri_max" : "=r" (result) ); - return(result); -} - -/** - * @brief Set the Base Priority value - * - * @param uint32_t BasePriority - * @return none - * - * Set the base priority register - */ -void __set_BASEPRI(uint32_t value) -{ - __ASM volatile ("MSR basepri, %0" : : "r" (value) ); -} - -/** - * @brief Return the Priority Mask value - * - * @param none - * @return uint32_t PriMask - * - * Return the state of the priority mask bit from the priority mask - * register - */ -uint32_t __get_PRIMASK(void) -{ - uint32_t result=0; - - __ASM volatile ("MRS %0, primask" : "=r" (result) ); - return(result); -} - -/** - * @brief Set the Priority Mask value - * - * @param uint32_t PriMask - * @return none - * - * Set the priority mask bit in the priority mask register - */ -void __set_PRIMASK(uint32_t priMask) -{ - __ASM volatile ("MSR primask, %0" : : "r" (priMask) ); -} - -/** - * @brief Return the Fault Mask value - * - * @param none - * @return uint32_t FaultMask - * - * Return the content of the fault mask register - */ -uint32_t __get_FAULTMASK(void) -{ - uint32_t result=0; - - __ASM volatile ("MRS %0, faultmask" : "=r" (result) ); - return(result); -} - -/** - * @brief Set the Fault Mask value - * - * @param uint32_t faultMask value - * @return none - * - * Set the fault mask register - */ -void __set_FAULTMASK(uint32_t faultMask) -{ - __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) ); -} - -/** - * @brief Reverse byte order in integer value - * - * @param uint32_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in integer value - */ -uint32_t __REV(uint32_t value) -{ - uint32_t result=0; - - __ASM volatile ("rev %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - -/** - * @brief Reverse byte order in unsigned short value - * - * @param uint16_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in unsigned short value - */ -uint32_t __REV16(uint16_t value) -{ - uint32_t result=0; - - __ASM volatile ("rev16 %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - -/** - * @brief Reverse byte order in signed short value with sign extension to integer - * - * @param int32_t value to reverse - * @return int32_t reversed value - * - * Reverse byte order in signed short value with sign extension to integer - */ -int32_t __REVSH(int16_t value) -{ - uint32_t result=0; - - __ASM volatile ("revsh %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - -/** - * @brief Reverse bit order of value - * - * @param uint32_t value to reverse - * @return uint32_t reversed value - * - * Reverse bit order of value - */ -uint32_t __RBIT(uint32_t value) -{ - uint32_t result=0; - - __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) ); - return(result); -} - -/** - * @brief LDR Exclusive - * - * @param uint8_t* address - * @return uint8_t value of (*address) - * - * Exclusive LDR command - */ -uint8_t __LDREXB(uint8_t *addr) -{ - uint8_t result=0; - - __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) ); - return(result); -} - -/** - * @brief LDR Exclusive - * - * @param uint16_t* address - * @return uint16_t value of (*address) - * - * Exclusive LDR command - */ -uint16_t __LDREXH(uint16_t *addr) -{ - uint16_t result=0; - - __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) ); - return(result); -} - -/** - * @brief LDR Exclusive - * - * @param uint32_t* address - * @return uint32_t value of (*address) - * - * Exclusive LDR command - */ -uint32_t __LDREXW(uint32_t *addr) -{ - uint32_t result=0; - - __ASM volatile ("ldrex %0, [%1]" : "=r" (result) : "r" (addr) ); - return(result); -} - -/** - * @brief STR Exclusive - * - * @param uint8_t *address - * @param uint8_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -uint32_t __STREXB(uint8_t value, uint8_t *addr) -{ - uint32_t result=0; - - __ASM volatile ("strexb %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); - return(result); -} - -/** - * @brief STR Exclusive - * - * @param uint16_t *address - * @param uint16_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -uint32_t __STREXH(uint16_t value, uint16_t *addr) -{ - uint32_t result=0; - - __ASM volatile ("strexh %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); - return(result); -} - -/** - * @brief STR Exclusive - * - * @param uint32_t *address - * @param uint32_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -uint32_t __STREXW(uint32_t value, uint32_t *addr) -{ - uint32_t result=0; - - __ASM volatile ("strex %0, %2, [%1]" : "=r" (result) : "r" (addr), "r" (value) ); - return(result); -} - -/** - * @brief Return the Control Register value - * - * @param none - * @return uint32_t Control value - * - * Return the content of the control register - */ -uint32_t __get_CONTROL(void) -{ - uint32_t result=0; - - __ASM volatile ("MRS %0, control" : "=r" (result) ); - return(result); -} - -/** - * @brief Set the Control Register value - * - * @param uint32_t Control value - * @return none - * - * Set the control register - */ -void __set_CONTROL(uint32_t control) -{ - __ASM volatile ("MSR control, %0" : : "r" (control) ); -} - -#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ -/* TASKING carm specific functions */ - -/* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all instrinsics, - * Including the CMSIS ones. - */ - -#endif - - - - - - - - - - - - - - - - - diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.h b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.h deleted file mode 100644 index b6f9696bf..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/core_cm3.h +++ /dev/null @@ -1,1367 +0,0 @@ -/****************************************************************************** - * @file: core_cm3.h - * @purpose: CMSIS Cortex-M3 Core Peripheral Access Layer Header File - * @version: V1.20 - * @date: 22. May 2009 - *---------------------------------------------------------------------------- - * - * Copyright (C) 2009 ARM Limited. All rights reserved. - * - * ARM Limited (ARM) is supplying this software for use with Cortex-Mx - * processor based microcontrollers. This file can be freely distributed - * within development tools that are supporting such ARM based processors. - * - * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED - * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. - * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR - * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. - * - ******************************************************************************/ - -#ifndef __CM3_CORE_H__ -#define __CM3_CORE_H__ - -#ifdef __cplusplus - extern "C" { -#endif - -#define __CM3_CMSIS_VERSION_MAIN (0x01) /*!< [31:16] CMSIS HAL main version */ -#define __CM3_CMSIS_VERSION_SUB (0x20) /*!< [15:0] CMSIS HAL sub version */ -#define __CM3_CMSIS_VERSION ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB) /*!< CMSIS HAL version number */ - -#define __CORTEX_M (0x03) /*!< Cortex core */ - -/** - * Lint configuration \n - * ----------------------- \n - * - * The following Lint messages will be suppressed and not shown: \n - * \n - * --- Error 10: --- \n - * register uint32_t __regBasePri __asm("basepri"); \n - * Error 10: Expecting ';' \n - * \n - * --- Error 530: --- \n - * return(__regBasePri); \n - * Warning 530: Symbol '__regBasePri' (line 264) not initialized \n - * \n - * --- Error 550: --- \n - * __regBasePri = (basePri & 0x1ff); \n - * } \n - * Warning 550: Symbol '__regBasePri' (line 271) not accessed \n - * \n - * --- Error 754: --- \n - * uint32_t RESERVED0[24]; \n - * Info 754: local structure member '' (line 109, file ./cm3_core.h) not referenced \n - * \n - * --- Error 750: --- \n - * #define __CM3_CORE_H__ \n - * Info 750: local macro '__CM3_CORE_H__' (line 43, file./cm3_core.h) not referenced \n - * \n - * --- Error 528: --- \n - * static __INLINE void NVIC_DisableIRQ(uint32_t IRQn) \n - * Warning 528: Symbol 'NVIC_DisableIRQ(unsigned int)' (line 419, file ./cm3_core.h) not referenced \n - * \n - * --- Error 751: --- \n - * } InterruptType_Type; \n - * Info 751: local typedef 'InterruptType_Type' (line 170, file ./cm3_core.h) not referenced \n - * \n - * \n - * Note: To re-enable a Message, insert a space before 'lint' * \n - * - */ - -/*lint -save */ -/*lint -e10 */ -/*lint -e530 */ -/*lint -e550 */ -/*lint -e754 */ -/*lint -e750 */ -/*lint -e528 */ -/*lint -e751 */ - - -#include /* Include standard types */ - -#if defined (__ICCARM__) - #include /* IAR Intrinsics */ -#endif - - -#ifndef __NVIC_PRIO_BITS - #define __NVIC_PRIO_BITS 4 /*!< standard definition for NVIC Priority Bits */ -#endif - - - - -/** - * IO definitions - * - * define access restrictions to peripheral registers - */ - -#ifdef __cplusplus -#define __I volatile /*!< defines 'read only' permissions */ -#else -#define __I volatile const /*!< defines 'read only' permissions */ -#endif -#define __O volatile /*!< defines 'write only' permissions */ -#define __IO volatile /*!< defines 'read / write' permissions */ - - - -/******************************************************************************* - * Register Abstraction - ******************************************************************************/ - - -/* System Reset */ -#define NVIC_VECTRESET 0 /*!< Vector Reset Bit */ -#define NVIC_SYSRESETREQ 2 /*!< System Reset Request */ -#define NVIC_AIRCR_VECTKEY (0x5FA << 16) /*!< AIRCR Key for write access */ -#define NVIC_AIRCR_ENDIANESS 15 /*!< Endianess */ - -/* Core Debug */ -#define CoreDebug_DEMCR_TRCENA (1 << 24) /*!< DEMCR TRCENA enable */ -#define ITM_TCR_ITMENA 1 /*!< ITM enable */ - - - - -/* memory mapping struct for Nested Vectored Interrupt Controller (NVIC) */ -typedef struct -{ - __IO uint32_t ISER[8]; /*!< Interrupt Set Enable Register */ - uint32_t RESERVED0[24]; - __IO uint32_t ICER[8]; /*!< Interrupt Clear Enable Register */ - uint32_t RSERVED1[24]; - __IO uint32_t ISPR[8]; /*!< Interrupt Set Pending Register */ - uint32_t RESERVED2[24]; - __IO uint32_t ICPR[8]; /*!< Interrupt Clear Pending Register */ - uint32_t RESERVED3[24]; - __IO uint32_t IABR[8]; /*!< Interrupt Active bit Register */ - uint32_t RESERVED4[56]; - __IO uint8_t IP[240]; /*!< Interrupt Priority Register, 8Bit wide */ - uint32_t RESERVED5[644]; - __O uint32_t STIR; /*!< Software Trigger Interrupt Register */ -} NVIC_Type; - - -/* memory mapping struct for System Control Block */ -typedef struct -{ - __I uint32_t CPUID; /*!< CPU ID Base Register */ - __IO uint32_t ICSR; /*!< Interrupt Control State Register */ - __IO uint32_t VTOR; /*!< Vector Table Offset Register */ - __IO uint32_t AIRCR; /*!< Application Interrupt / Reset Control Register */ - __IO uint32_t SCR; /*!< System Control Register */ - __IO uint32_t CCR; /*!< Configuration Control Register */ - __IO uint8_t SHP[12]; /*!< System Handlers Priority Registers (4-7, 8-11, 12-15) */ - __IO uint32_t SHCSR; /*!< System Handler Control and State Register */ - __IO uint32_t CFSR; /*!< Configurable Fault Status Register */ - __IO uint32_t HFSR; /*!< Hard Fault Status Register */ - __IO uint32_t DFSR; /*!< Debug Fault Status Register */ - __IO uint32_t MMFAR; /*!< Mem Manage Address Register */ - __IO uint32_t BFAR; /*!< Bus Fault Address Register */ - __IO uint32_t AFSR; /*!< Auxiliary Fault Status Register */ - __I uint32_t PFR[2]; /*!< Processor Feature Register */ - __I uint32_t DFR; /*!< Debug Feature Register */ - __I uint32_t ADR; /*!< Auxiliary Feature Register */ - __I uint32_t MMFR[4]; /*!< Memory Model Feature Register */ - __I uint32_t ISAR[5]; /*!< ISA Feature Register */ -} SCB_Type; - - -/* memory mapping struct for SysTick */ -typedef struct -{ - __IO uint32_t CTRL; /*!< SysTick Control and Status Register */ - __IO uint32_t LOAD; /*!< SysTick Reload Value Register */ - __IO uint32_t VAL; /*!< SysTick Current Value Register */ - __I uint32_t CALIB; /*!< SysTick Calibration Register */ -} SysTick_Type; - - -/* memory mapping structur for ITM */ -typedef struct -{ - __O union - { - __O uint8_t u8; /*!< ITM Stimulus Port 8-bit */ - __O uint16_t u16; /*!< ITM Stimulus Port 16-bit */ - __O uint32_t u32; /*!< ITM Stimulus Port 32-bit */ - } PORT [32]; /*!< ITM Stimulus Port Registers */ - uint32_t RESERVED0[864]; - __IO uint32_t TER; /*!< ITM Trace Enable Register */ - uint32_t RESERVED1[15]; - __IO uint32_t TPR; /*!< ITM Trace Privilege Register */ - uint32_t RESERVED2[15]; - __IO uint32_t TCR; /*!< ITM Trace Control Register */ - uint32_t RESERVED3[29]; - __IO uint32_t IWR; /*!< ITM Integration Write Register */ - __IO uint32_t IRR; /*!< ITM Integration Read Register */ - __IO uint32_t IMCR; /*!< ITM Integration Mode Control Register */ - uint32_t RESERVED4[43]; - __IO uint32_t LAR; /*!< ITM Lock Access Register */ - __IO uint32_t LSR; /*!< ITM Lock Status Register */ - uint32_t RESERVED5[6]; - __I uint32_t PID4; /*!< ITM Product ID Registers */ - __I uint32_t PID5; - __I uint32_t PID6; - __I uint32_t PID7; - __I uint32_t PID0; - __I uint32_t PID1; - __I uint32_t PID2; - __I uint32_t PID3; - __I uint32_t CID0; - __I uint32_t CID1; - __I uint32_t CID2; - __I uint32_t CID3; -} ITM_Type; - - -/* memory mapped struct for Interrupt Type */ -typedef struct -{ - uint32_t RESERVED0; - __I uint32_t ICTR; /*!< Interrupt Control Type Register */ -#if ((defined __CM3_REV) && (__CM3_REV >= 0x200)) - __IO uint32_t ACTLR; /*!< Auxiliary Control Register */ -#else - uint32_t RESERVED1; -#endif -} InterruptType_Type; - - -/* Memory Protection Unit */ -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) -typedef struct -{ - __I uint32_t TYPE; /*!< MPU Type Register */ - __IO uint32_t CTRL; /*!< MPU Control Register */ - __IO uint32_t RNR; /*!< MPU Region RNRber Register */ - __IO uint32_t RBAR; /*!< MPU Region Base Address Register */ - __IO uint32_t RASR; /*!< MPU Region Attribute and Size Register */ - __IO uint32_t RBAR_A1; /*!< MPU Alias 1 Region Base Address Register */ - __IO uint32_t RASR_A1; /*!< MPU Alias 1 Region Attribute and Size Register */ - __IO uint32_t RBAR_A2; /*!< MPU Alias 2 Region Base Address Register */ - __IO uint32_t RASR_A2; /*!< MPU Alias 2 Region Attribute and Size Register */ - __IO uint32_t RBAR_A3; /*!< MPU Alias 3 Region Base Address Register */ - __IO uint32_t RASR_A3; /*!< MPU Alias 3 Region Attribute and Size Register */ -} MPU_Type; -#endif - - -/* Core Debug Register */ -typedef struct -{ - __IO uint32_t DHCSR; /*!< Debug Halting Control and Status Register */ - __O uint32_t DCRSR; /*!< Debug Core Register Selector Register */ - __IO uint32_t DCRDR; /*!< Debug Core Register Data Register */ - __IO uint32_t DEMCR; /*!< Debug Exception and Monitor Control Register */ -} CoreDebug_Type; - - -/* Memory mapping of Cortex-M3 Hardware */ -#define SCS_BASE (0xE000E000) /*!< System Control Space Base Address */ -#define ITM_BASE (0xE0000000) /*!< ITM Base Address */ -#define CoreDebug_BASE (0xE000EDF0) /*!< Core Debug Base Address */ -#define SysTick_BASE (SCS_BASE + 0x0010) /*!< SysTick Base Address */ -#define NVIC_BASE (SCS_BASE + 0x0100) /*!< NVIC Base Address */ -#define SCB_BASE (SCS_BASE + 0x0D00) /*!< System Control Block Base Address */ - -#define InterruptType ((InterruptType_Type *) SCS_BASE) /*!< Interrupt Type Register */ -#define SCB ((SCB_Type *) SCB_BASE) /*!< SCB configuration struct */ -#define SysTick ((SysTick_Type *) SysTick_BASE) /*!< SysTick configuration struct */ -#define NVIC ((NVIC_Type *) NVIC_BASE) /*!< NVIC configuration struct */ -#define ITM ((ITM_Type *) ITM_BASE) /*!< ITM configuration struct */ -#define CoreDebug ((CoreDebug_Type *) CoreDebug_BASE) /*!< Core Debug configuration struct */ - -#if defined (__MPU_PRESENT) && (__MPU_PRESENT == 1) - #define MPU_BASE (SCS_BASE + 0x0D90) /*!< Memory Protection Unit */ - #define MPU ((MPU_Type*) MPU_BASE) /*!< Memory Protection Unit */ -#endif - - - -/******************************************************************************* - * Hardware Abstraction Layer - ******************************************************************************/ - - -#if defined ( __CC_ARM ) - #define __ASM __asm /*!< asm keyword for ARM Compiler */ - #define __INLINE __inline /*!< inline keyword for ARM Compiler */ - -#elif defined ( __ICCARM__ ) - #define __ASM __asm /*!< asm keyword for IAR Compiler */ - #define __INLINE inline /*!< inline keyword for IAR Compiler. Only avaiable in High optimization mode! */ - -#elif defined ( __GNUC__ ) - #define __ASM __asm /*!< asm keyword for GNU Compiler */ - #define __INLINE inline /*!< inline keyword for GNU Compiler */ - -#elif defined ( __TASKING__ ) - #define __ASM __asm /*!< asm keyword for TASKING Compiler */ - #define __INLINE inline /*!< inline keyword for TASKING Compiler */ - -#endif - - -/* ################### Compiler specific Intrinsics ########################### */ - -#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/ -/* ARM armcc specific functions */ - -#define __enable_fault_irq __enable_fiq -#define __disable_fault_irq __disable_fiq - -#define __NOP __nop -#define __WFI __wfi -#define __WFE __wfe -#define __SEV __sev -#define __ISB() __isb(0) -#define __DSB() __dsb(0) -#define __DMB() __dmb(0) -#define __REV __rev -#define __RBIT __rbit -#define __LDREXB(ptr) ((unsigned char ) __ldrex(ptr)) -#define __LDREXH(ptr) ((unsigned short) __ldrex(ptr)) -#define __LDREXW(ptr) ((unsigned int ) __ldrex(ptr)) -#define __STREXB(value, ptr) __strex(value, ptr) -#define __STREXH(value, ptr) __strex(value, ptr) -#define __STREXW(value, ptr) __strex(value, ptr) - - -/* intrinsic unsigned long long __ldrexd(volatile void *ptr) */ -/* intrinsic int __strexd(unsigned long long val, volatile void *ptr) */ -/* intrinsic void __enable_irq(); */ -/* intrinsic void __disable_irq(); */ - - -/** - * @brief Return the Process Stack Pointer - * - * @param none - * @return uint32_t ProcessStackPointer - * - * Return the actual process stack pointer - */ -extern uint32_t __get_PSP(void); - -/** - * @brief Set the Process Stack Pointer - * - * @param uint32_t Process Stack Pointer - * @return none - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -extern void __set_PSP(uint32_t topOfProcStack); - -/** - * @brief Return the Main Stack Pointer - * - * @param none - * @return uint32_t Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -extern uint32_t __get_MSP(void); - -/** - * @brief Set the Main Stack Pointer - * - * @param uint32_t Main Stack Pointer - * @return none - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -extern void __set_MSP(uint32_t topOfMainStack); - -/** - * @brief Reverse byte order in unsigned short value - * - * @param uint16_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in unsigned short value - */ -extern uint32_t __REV16(uint16_t value); - -/* - * @brief Reverse byte order in signed short value with sign extension to integer - * - * @param int16_t value to reverse - * @return int32_t reversed value - * - * Reverse byte order in signed short value with sign extension to integer - */ -extern int32_t __REVSH(int16_t value); - - -#if (__ARMCC_VERSION < 400000) - -/** - * @brief Remove the exclusive lock created by ldrex - * - * @param none - * @return none - * - * Removes the exclusive lock which is created by ldrex. - */ -extern void __CLREX(void); - -/** - * @brief Return the Base Priority value - * - * @param none - * @return uint32_t BasePriority - * - * Return the content of the base priority register - */ -extern uint32_t __get_BASEPRI(void); - -/** - * @brief Set the Base Priority value - * - * @param uint32_t BasePriority - * @return none - * - * Set the base priority register - */ -extern void __set_BASEPRI(uint32_t basePri); - -/** - * @brief Return the Priority Mask value - * - * @param none - * @return uint32_t PriMask - * - * Return the state of the priority mask bit from the priority mask - * register - */ -extern uint32_t __get_PRIMASK(void); - -/** - * @brief Set the Priority Mask value - * - * @param uint32_t PriMask - * @return none - * - * Set the priority mask bit in the priority mask register - */ -extern void __set_PRIMASK(uint32_t priMask); - -/** - * @brief Return the Fault Mask value - * - * @param none - * @return uint32_t FaultMask - * - * Return the content of the fault mask register - */ -extern uint32_t __get_FAULTMASK(void); - -/** - * @brief Set the Fault Mask value - * - * @param uint32_t faultMask value - * @return none - * - * Set the fault mask register - */ -extern void __set_FAULTMASK(uint32_t faultMask); - -/** - * @brief Return the Control Register value - * - * @param none - * @return uint32_t Control value - * - * Return the content of the control register - */ -extern uint32_t __get_CONTROL(void); - -/** - * @brief Set the Control Register value - * - * @param uint32_t Control value - * @return none - * - * Set the control register - */ -extern void __set_CONTROL(uint32_t control); - -#else /* (__ARMCC_VERSION >= 400000) */ - - -/** - * @brief Remove the exclusive lock created by ldrex - * - * @param none - * @return none - * - * Removes the exclusive lock which is created by ldrex. - */ -#define __CLREX __clrex - -/** - * @brief Return the Base Priority value - * - * @param none - * @return uint32_t BasePriority - * - * Return the content of the base priority register - */ -static __INLINE uint32_t __get_BASEPRI(void) -{ - register uint32_t __regBasePri __ASM("basepri"); - return(__regBasePri); -} - -/** - * @brief Set the Base Priority value - * - * @param uint32_t BasePriority - * @return none - * - * Set the base priority register - */ -static __INLINE void __set_BASEPRI(uint32_t basePri) -{ - register uint32_t __regBasePri __ASM("basepri"); - __regBasePri = (basePri & 0x1ff); -} - -/** - * @brief Return the Priority Mask value - * - * @param none - * @return uint32_t PriMask - * - * Return the state of the priority mask bit from the priority mask - * register - */ -static __INLINE uint32_t __get_PRIMASK(void) -{ - register uint32_t __regPriMask __ASM("primask"); - return(__regPriMask); -} - -/** - * @brief Set the Priority Mask value - * - * @param uint32_t PriMask - * @return none - * - * Set the priority mask bit in the priority mask register - */ -static __INLINE void __set_PRIMASK(uint32_t priMask) -{ - register uint32_t __regPriMask __ASM("primask"); - __regPriMask = (priMask); -} - -/** - * @brief Return the Fault Mask value - * - * @param none - * @return uint32_t FaultMask - * - * Return the content of the fault mask register - */ -static __INLINE uint32_t __get_FAULTMASK(void) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - return(__regFaultMask); -} - -/** - * @brief Set the Fault Mask value - * - * @param uint32_t faultMask value - * @return none - * - * Set the fault mask register - */ -static __INLINE void __set_FAULTMASK(uint32_t faultMask) -{ - register uint32_t __regFaultMask __ASM("faultmask"); - __regFaultMask = (faultMask & 1); -} - -/** - * @brief Return the Control Register value - * - * @param none - * @return uint32_t Control value - * - * Return the content of the control register - */ -static __INLINE uint32_t __get_CONTROL(void) -{ - register uint32_t __regControl __ASM("control"); - return(__regControl); -} - -/** - * @brief Set the Control Register value - * - * @param uint32_t Control value - * @return none - * - * Set the control register - */ -static __INLINE void __set_CONTROL(uint32_t control) -{ - register uint32_t __regControl __ASM("control"); - __regControl = control; -} - -#endif /* __ARMCC_VERSION */ - - - -#elif (defined (__ICCARM__)) /*------------------ ICC Compiler -------------------*/ -/* IAR iccarm specific functions */ - -#define __enable_irq __enable_interrupt /*!< global Interrupt enable */ -#define __disable_irq __disable_interrupt /*!< global Interrupt disable */ - -static __INLINE void __enable_fault_irq() { __ASM ("cpsie f"); } -static __INLINE void __disable_fault_irq() { __ASM ("cpsid f"); } - -#define __NOP __no_operation() /*!< no operation intrinsic in IAR Compiler */ -static __INLINE void __WFI() { __ASM ("wfi"); } -static __INLINE void __WFE() { __ASM ("wfe"); } -static __INLINE void __SEV() { __ASM ("sev"); } -static __INLINE void __CLREX() { __ASM ("clrex"); } - -/* intrinsic void __ISB(void) */ -/* intrinsic void __DSB(void) */ -/* intrinsic void __DMB(void) */ -/* intrinsic void __set_PRIMASK(); */ -/* intrinsic void __get_PRIMASK(); */ -/* intrinsic void __set_FAULTMASK(); */ -/* intrinsic void __get_FAULTMASK(); */ -/* intrinsic uint32_t __REV(uint32_t value); */ -/* intrinsic uint32_t __REVSH(uint32_t value); */ -/* intrinsic unsigned long __STREX(unsigned long, unsigned long); */ -/* intrinsic unsigned long __LDREX(unsigned long *); */ - - -/** - * @brief Return the Process Stack Pointer - * - * @param none - * @return uint32_t ProcessStackPointer - * - * Return the actual process stack pointer - */ -extern uint32_t __get_PSP(void); - -/** - * @brief Set the Process Stack Pointer - * - * @param uint32_t Process Stack Pointer - * @return none - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -extern void __set_PSP(uint32_t topOfProcStack); - -/** - * @brief Return the Main Stack Pointer - * - * @param none - * @return uint32_t Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -extern uint32_t __get_MSP(void); - -/** - * @brief Set the Main Stack Pointer - * - * @param uint32_t Main Stack Pointer - * @return none - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -extern void __set_MSP(uint32_t topOfMainStack); - -/** - * @brief Reverse byte order in unsigned short value - * - * @param uint16_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in unsigned short value - */ -extern uint32_t __REV16(uint16_t value); - -/** - * @brief Reverse bit order of value - * - * @param uint32_t value to reverse - * @return uint32_t reversed value - * - * Reverse bit order of value - */ -extern uint32_t __RBIT(uint32_t value); - -/** - * @brief LDR Exclusive - * - * @param uint8_t* address - * @return uint8_t value of (*address) - * - * Exclusive LDR command - */ -extern uint8_t __LDREXB(uint8_t *addr); - -/** - * @brief LDR Exclusive - * - * @param uint16_t* address - * @return uint16_t value of (*address) - * - * Exclusive LDR command - */ -extern uint16_t __LDREXH(uint16_t *addr); - -/** - * @brief LDR Exclusive - * - * @param uint32_t* address - * @return uint32_t value of (*address) - * - * Exclusive LDR command - */ -extern uint32_t __LDREXW(uint32_t *addr); - -/** - * @brief STR Exclusive - * - * @param uint8_t *address - * @param uint8_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -extern uint32_t __STREXB(uint8_t value, uint8_t *addr); - -/** - * @brief STR Exclusive - * - * @param uint16_t *address - * @param uint16_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -extern uint32_t __STREXH(uint16_t value, uint16_t *addr); - -/** - * @brief STR Exclusive - * - * @param uint32_t *address - * @param uint32_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -extern uint32_t __STREXW(uint32_t value, uint32_t *addr); - - - -#elif (defined (__GNUC__)) /*------------------ GNU Compiler ---------------------*/ -/* GNU gcc specific functions */ - -static __INLINE void __enable_irq() { __ASM volatile ("cpsie i"); } -static __INLINE void __disable_irq() { __ASM volatile ("cpsid i"); } - -static __INLINE void __enable_fault_irq() { __ASM volatile ("cpsie f"); } -static __INLINE void __disable_fault_irq() { __ASM volatile ("cpsid f"); } - -static __INLINE void __NOP() { __ASM volatile ("nop"); } -static __INLINE void __WFI() { __ASM volatile ("wfi"); } -static __INLINE void __WFE() { __ASM volatile ("wfe"); } -static __INLINE void __SEV() { __ASM volatile ("sev"); } -static __INLINE void __ISB() { __ASM volatile ("isb"); } -static __INLINE void __DSB() { __ASM volatile ("dsb"); } -static __INLINE void __DMB() { __ASM volatile ("dmb"); } -static __INLINE void __CLREX() { __ASM volatile ("clrex"); } - - -/** - * @brief Return the Process Stack Pointer - * - * @param none - * @return uint32_t ProcessStackPointer - * - * Return the actual process stack pointer - */ -extern uint32_t __get_PSP(void); - -/** - * @brief Set the Process Stack Pointer - * - * @param uint32_t Process Stack Pointer - * @return none - * - * Assign the value ProcessStackPointer to the MSP - * (process stack pointer) Cortex processor register - */ -extern void __set_PSP(uint32_t topOfProcStack); - -/** - * @brief Return the Main Stack Pointer - * - * @param none - * @return uint32_t Main Stack Pointer - * - * Return the current value of the MSP (main stack pointer) - * Cortex processor register - */ -extern uint32_t __get_MSP(void); - -/** - * @brief Set the Main Stack Pointer - * - * @param uint32_t Main Stack Pointer - * @return none - * - * Assign the value mainStackPointer to the MSP - * (main stack pointer) Cortex processor register - */ -extern void __set_MSP(uint32_t topOfMainStack); - -/** - * @brief Return the Base Priority value - * - * @param none - * @return uint32_t BasePriority - * - * Return the content of the base priority register - */ -extern uint32_t __get_BASEPRI(void); - -/** - * @brief Set the Base Priority value - * - * @param uint32_t BasePriority - * @return none - * - * Set the base priority register - */ -extern void __set_BASEPRI(uint32_t basePri); - -/** - * @brief Return the Priority Mask value - * - * @param none - * @return uint32_t PriMask - * - * Return the state of the priority mask bit from the priority mask - * register - */ -extern uint32_t __get_PRIMASK(void); - -/** - * @brief Set the Priority Mask value - * - * @param uint32_t PriMask - * @return none - * - * Set the priority mask bit in the priority mask register - */ -extern void __set_PRIMASK(uint32_t priMask); - -/** - * @brief Return the Fault Mask value - * - * @param none - * @return uint32_t FaultMask - * - * Return the content of the fault mask register - */ -extern uint32_t __get_FAULTMASK(void); - -/** - * @brief Set the Fault Mask value - * - * @param uint32_t faultMask value - * @return none - * - * Set the fault mask register - */ -extern void __set_FAULTMASK(uint32_t faultMask); - -/** - * @brief Return the Control Register value -* -* @param none -* @return uint32_t Control value - * - * Return the content of the control register - */ -extern uint32_t __get_CONTROL(void); - -/** - * @brief Set the Control Register value - * - * @param uint32_t Control value - * @return none - * - * Set the control register - */ -extern void __set_CONTROL(uint32_t control); - -/** - * @brief Reverse byte order in integer value - * - * @param uint32_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in integer value - */ -extern uint32_t __REV(uint32_t value); - -/** - * @brief Reverse byte order in unsigned short value - * - * @param uint16_t value to reverse - * @return uint32_t reversed value - * - * Reverse byte order in unsigned short value - */ -extern uint32_t __REV16(uint16_t value); - -/* - * Reverse byte order in signed short value with sign extension to integer - * - * @param int16_t value to reverse - * @return int32_t reversed value - * - * @brief Reverse byte order in signed short value with sign extension to integer - */ -extern int32_t __REVSH(int16_t value); - -/** - * @brief Reverse bit order of value - * - * @param uint32_t value to reverse - * @return uint32_t reversed value - * - * Reverse bit order of value - */ -extern uint32_t __RBIT(uint32_t value); - -/** - * @brief LDR Exclusive - * - * @param uint8_t* address - * @return uint8_t value of (*address) - * - * Exclusive LDR command - */ -extern uint8_t __LDREXB(uint8_t *addr); - -/** - * @brief LDR Exclusive - * - * @param uint16_t* address - * @return uint16_t value of (*address) - * - * Exclusive LDR command - */ -extern uint16_t __LDREXH(uint16_t *addr); - -/** - * @brief LDR Exclusive - * - * @param uint32_t* address - * @return uint32_t value of (*address) - * - * Exclusive LDR command - */ -extern uint32_t __LDREXW(uint32_t *addr); - -/** - * @brief STR Exclusive - * - * @param uint8_t *address - * @param uint8_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -extern uint32_t __STREXB(uint8_t value, uint8_t *addr); - -/** - * @brief STR Exclusive - * - * @param uint16_t *address - * @param uint16_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -extern uint32_t __STREXH(uint16_t value, uint16_t *addr); - -/** - * @brief STR Exclusive - * - * @param uint32_t *address - * @param uint32_t value to store - * @return uint32_t successful / failed - * - * Exclusive STR command - */ -extern uint32_t __STREXW(uint32_t value, uint32_t *addr); - - -#elif (defined (__TASKING__)) /*------------------ TASKING Compiler ---------------------*/ -/* TASKING carm specific functions */ - -/* - * The CMSIS functions have been implemented as intrinsics in the compiler. - * Please use "carm -?i" to get an up to date list of all instrinsics, - * Including the CMSIS ones. - */ - -#endif - - - -/* ########################## NVIC functions #################################### */ - - -/** - * @brief Set the Priority Grouping in NVIC Interrupt Controller - * - * @param uint32_t priority_grouping is priority grouping field - * @return none - * - * Set the priority grouping field using the required unlock sequence. - * The parameter priority_grouping is assigned to the field - * SCB->AIRCR [10:8] PRIGROUP field. Only values from 0..7 are used. - * In case of a conflict between priority grouping and available - * priority bits (__NVIC_PRIO_BITS) the smallest possible priority group is set. - */ -static __INLINE void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) -{ - uint32_t reg_value; - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - - reg_value = SCB->AIRCR; /* read old register configuration */ - reg_value &= ~((0xFFFFU << 16) | (0x0F << 8)); /* clear bits to change */ - reg_value = ((reg_value | NVIC_AIRCR_VECTKEY | (PriorityGroupTmp << 8))); /* Insert write key and priorty group */ - SCB->AIRCR = reg_value; -} - -/** - * @brief Get the Priority Grouping from NVIC Interrupt Controller - * - * @param none - * @return uint32_t priority grouping field - * - * Get the priority grouping from NVIC Interrupt Controller. - * priority grouping is SCB->AIRCR [10:8] PRIGROUP field. - */ -static __INLINE uint32_t NVIC_GetPriorityGrouping(void) -{ - return ((SCB->AIRCR >> 8) & 0x07); /* read priority grouping field */ -} - -/** - * @brief Enable Interrupt in NVIC Interrupt Controller - * - * @param IRQn_Type IRQn specifies the interrupt number - * @return none - * - * Enable a device specific interupt in the NVIC interrupt controller. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_EnableIRQ(IRQn_Type IRQn) -{ - NVIC->ISER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* enable interrupt */ -} - -/** - * @brief Disable the interrupt line for external interrupt specified - * - * @param IRQn_Type IRQn is the positive number of the external interrupt - * @return none - * - * Disable a device specific interupt in the NVIC interrupt controller. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_DisableIRQ(IRQn_Type IRQn) -{ - NVIC->ICER[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* disable interrupt */ -} - -/** - * @brief Read the interrupt pending bit for a device specific interrupt source - * - * @param IRQn_Type IRQn is the number of the device specifc interrupt - * @return uint32_t 1 if pending interrupt else 0 - * - * Read the pending register in NVIC and return 1 if its status is pending, - * otherwise it returns 0 - */ -static __INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn) -{ - return((uint32_t) ((NVIC->ISPR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if pending else 0 */ -} - -/** - * @brief Set the pending bit for an external interrupt - * - * @param IRQn_Type IRQn is the Number of the interrupt - * @return none - * - * Set the pending bit for the specified interrupt. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ISPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* set interrupt pending */ -} - -/** - * @brief Clear the pending bit for an external interrupt - * - * @param IRQn_Type IRQn is the Number of the interrupt - * @return none - * - * Clear the pending bit for the specified interrupt. - * The interrupt number cannot be a negative value. - */ -static __INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn) -{ - NVIC->ICPR[((uint32_t)(IRQn) >> 5)] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */ -} - -/** - * @brief Read the active bit for an external interrupt - * - * @param IRQn_Type IRQn is the Number of the interrupt - * @return uint32_t 1 if active else 0 - * - * Read the active register in NVIC and returns 1 if its status is active, - * otherwise it returns 0. - */ -static __INLINE uint32_t NVIC_GetActive(IRQn_Type IRQn) -{ - return((uint32_t)((NVIC->IABR[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0)); /* Return 1 if active else 0 */ -} - -/** - * @brief Set the priority for an interrupt - * - * @param IRQn_Type IRQn is the Number of the interrupt - * @param priority is the priority for the interrupt - * @return none - * - * Set the priority for the specified interrupt. The interrupt - * number can be positive to specify an external (device specific) - * interrupt, or negative to specify an internal (core) interrupt. \n - * - * Note: The priority cannot be set for every core interrupt. - */ -static __INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority) -{ - if(IRQn < 0) { - SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for Cortex-M3 System Interrupts */ - else { - NVIC->IP[(uint32_t)(IRQn)] = ((priority << (8 - __NVIC_PRIO_BITS)) & 0xff); } /* set Priority for device specific Interrupts */ -} - -/** - * @brief Read the priority for an interrupt - * - * @param IRQn_Type IRQn is the Number of the interrupt - * @return uint32_t priority is the priority for the interrupt - * - * Read the priority for the specified interrupt. The interrupt - * number can be positive to specify an external (device specific) - * interrupt, or negative to specify an internal (core) interrupt. - * - * The returned priority value is automatically aligned to the implemented - * priority bits of the microcontroller. - * - * Note: The priority cannot be set for every core interrupt. - */ -static __INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn) -{ - - if(IRQn < 0) { - return((uint32_t)(SCB->SHP[((uint32_t)(IRQn) & 0xF)-4] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M3 system interrupts */ - else { - return((uint32_t)(NVIC->IP[(uint32_t)(IRQn)] >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */ -} - - -/** - * @brief Encode the priority for an interrupt - * - * @param uint32_t PriorityGroup is the used priority group - * @param uint32_t PreemptPriority is the preemptive priority value (starting from 0) - * @param uint32_t SubPriority is the sub priority value (starting from 0) - * @return uint32_t the priority for the interrupt - * - * Encode the priority for an interrupt with the given priority group, - * preemptive priority value and sub priority value. - * In case of a conflict between priority grouping and available - * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. - * - * The returned priority value can be used for NVIC_SetPriority(...) function - */ -static __INLINE uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - - return ( - ((PreemptPriority & ((1 << (PreemptPriorityBits)) - 1)) << SubPriorityBits) | - ((SubPriority & ((1 << (SubPriorityBits )) - 1))) - ); -} - - -/** - * @brief Decode the priority of an interrupt - * - * @param uint32_t Priority the priority for the interrupt - * @param uint32_t PrioGroup is the used priority group - * @param uint32_t* pPreemptPrio is the preemptive priority value (starting from 0) - * @param uint32_t* pSubPrio is the sub priority value (starting from 0) - * @return none - * - * Decode an interrupt priority value with the given priority group to - * preemptive priority value and sub priority value. - * In case of a conflict between priority grouping and available - * priority bits (__NVIC_PRIO_BITS) the samllest possible priority group is set. - * - * The priority value can be retrieved with NVIC_GetPriority(...) function - */ -static __INLINE void NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority) -{ - uint32_t PriorityGroupTmp = (PriorityGroup & 0x07); /* only values 0..7 are used */ - uint32_t PreemptPriorityBits; - uint32_t SubPriorityBits; - - PreemptPriorityBits = ((7 - PriorityGroupTmp) > __NVIC_PRIO_BITS) ? __NVIC_PRIO_BITS : 7 - PriorityGroupTmp; - SubPriorityBits = ((PriorityGroupTmp + __NVIC_PRIO_BITS) < 7) ? 0 : PriorityGroupTmp - 7 + __NVIC_PRIO_BITS; - - *pPreemptPriority = (Priority >> SubPriorityBits) & ((1 << (PreemptPriorityBits)) - 1); - *pSubPriority = (Priority ) & ((1 << (SubPriorityBits )) - 1); -} - - - -/* ################################## SysTick function ############################################ */ - -#if (!defined (__Vendor_SysTickConfig)) || (__Vendor_SysTickConfig == 0) - -/* SysTick constants */ -#define SYSTICK_ENABLE 0 /* Config-Bit to start or stop the SysTick Timer */ -#define SYSTICK_TICKINT 1 /* Config-Bit to enable or disable the SysTick interrupt */ -#define SYSTICK_CLKSOURCE 2 /* Clocksource has the offset 2 in SysTick Control and Status Register */ -#define SYSTICK_MAXCOUNT ((1<<24) -1) /* SysTick MaxCount */ - -/** - * @brief Initialize and start the SysTick counter and its interrupt. - * - * @param uint32_t ticks is the number of ticks between two interrupts - * @return none - * - * Initialise the system tick timer and its interrupt and start the - * system tick timer / counter in free running mode to generate - * periodical interrupts. - */ -static __INLINE uint32_t SysTick_Config(uint32_t ticks) -{ - if (ticks > SYSTICK_MAXCOUNT) return (1); /* Reload value impossible */ - - SysTick->LOAD = (ticks & SYSTICK_MAXCOUNT) - 1; /* set reload register */ - NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Cortex-M0 System Interrupts */ - SysTick->VAL = (0x00); /* Load the SysTick Counter Value */ - SysTick->CTRL = (1 << SYSTICK_CLKSOURCE) | (1<AIRCR = (NVIC_AIRCR_VECTKEY | (SCB->AIRCR & (0x700)) | (1<DEMCR & CoreDebug_DEMCR_TRCENA) && - (ITM->TCR & ITM_TCR_ITMENA) && - (ITM->TER & (1UL << 0)) ) - { - while (ITM->PORT[0].u32 == 0); - ITM->PORT[0].u8 = (uint8_t) ch; - } - return (ch); -} - -#ifdef __cplusplus -} -#endif - -#endif /* __CM3_CORE_H__ */ - -/*lint -restore */ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_cl.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_cl.s deleted file mode 100644 index 3d08f3b5a..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_cl.s +++ /dev/null @@ -1,364 +0,0 @@ -;******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_cl.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x Connectivity line devices vector table for RVMDK -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; Stack Configuration -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; Heap Configuration -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD CAN1_TX_IRQHandler ; CAN1 TX - DCD CAN1_RX0_IRQHandler ; CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C1 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line - DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 - DCD ETH_IRQHandler ; Ethernet - DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line - DCD CAN2_TX_IRQHandler ; CAN2 TX - DCD CAN2_RX0_IRQHandler ; CAN2 RX0 - DCD CAN2_RX1_IRQHandler ; CAN2 RX1 - DCD CAN2_SCE_IRQHandler ; CAN2 SCE - DCD OTG_FS_IRQHandler ; USB OTG FS -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler routine -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT CAN1_TX_IRQHandler [WEAK] - EXPORT CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT OTG_FS_WKUP_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_IRQHandler [WEAK] - EXPORT DMA2_Channel5_IRQHandler [WEAK] - EXPORT ETH_IRQHandler [WEAK] - EXPORT ETH_WKUP_IRQHandler [WEAK] - EXPORT CAN2_TX_IRQHandler [WEAK] - EXPORT CAN2_RX0_IRQHandler [WEAK] - EXPORT CAN2_RX1_IRQHandler [WEAK] - EXPORT CAN2_SCE_IRQHandler [WEAK] - EXPORT OTG_FS_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -CAN1_TX_IRQHandler -CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -OTG_FS_WKUP_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_IRQHandler -DMA2_Channel5_IRQHandler -ETH_IRQHandler -ETH_WKUP_IRQHandler -CAN2_TX_IRQHandler -CAN2_RX0_IRQHandler -CAN2_RX1_IRQHandler -CAN2_SCE_IRQHandler -OTG_FS_IRQHandler - - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_hd.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_hd.s deleted file mode 100644 index a45ce66ec..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_hd.s +++ /dev/null @@ -1,370 +0,0 @@ -;******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_hd.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x High Density Devices vector table for RVMDK -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Configure external SRAM mounted on STM3210E-EVAL board -;* to be used as data memory (optional, to be enabled by user) -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; Stack Configuration -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - -__initial_spTop EQU 0x20000400 ; stack used for SystemInit_ExtMemCtl - ; always internal RAM used - -; Heap Configuration -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_spTop ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_IRQHandler ; TIM8 Break - DCD TIM8_UP_IRQHandler ; TIM8 Update - DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Dummy SystemInit_ExtMemCtl function -SystemInit_ExtMemCtl PROC - EXPORT SystemInit_ExtMemCtl [WEAK] - BX LR - ENDP - -; Reset handler routine -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - - LDR R0, = SystemInit_ExtMemCtl ; initialize external memory controller - BLX R0 - - LDR R1, = __initial_sp ; restore original stack pointer - MSR MSP, R1 - - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT TIM4_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT I2C2_EV_IRQHandler [WEAK] - EXPORT I2C2_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT SPI2_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT USART3_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - EXPORT TIM8_BRK_IRQHandler [WEAK] - EXPORT TIM8_UP_IRQHandler [WEAK] - EXPORT TIM8_TRG_COM_IRQHandler [WEAK] - EXPORT TIM8_CC_IRQHandler [WEAK] - EXPORT ADC3_IRQHandler [WEAK] - EXPORT FSMC_IRQHandler [WEAK] - EXPORT SDIO_IRQHandler [WEAK] - EXPORT TIM5_IRQHandler [WEAK] - EXPORT SPI3_IRQHandler [WEAK] - EXPORT UART4_IRQHandler [WEAK] - EXPORT UART5_IRQHandler [WEAK] - EXPORT TIM6_IRQHandler [WEAK] - EXPORT TIM7_IRQHandler [WEAK] - EXPORT DMA2_Channel1_IRQHandler [WEAK] - EXPORT DMA2_Channel2_IRQHandler [WEAK] - EXPORT DMA2_Channel3_IRQHandler [WEAK] - EXPORT DMA2_Channel4_5_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -TIM4_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -I2C2_EV_IRQHandler -I2C2_ER_IRQHandler -SPI1_IRQHandler -SPI2_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -USART3_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -USBWakeUp_IRQHandler -TIM8_BRK_IRQHandler -TIM8_UP_IRQHandler -TIM8_TRG_COM_IRQHandler -TIM8_CC_IRQHandler -ADC3_IRQHandler -FSMC_IRQHandler -SDIO_IRQHandler -TIM5_IRQHandler -SPI3_IRQHandler -UART4_IRQHandler -UART5_IRQHandler -TIM6_IRQHandler -TIM7_IRQHandler -DMA2_Channel1_IRQHandler -DMA2_Channel2_IRQHandler -DMA2_Channel3_IRQHandler -DMA2_Channel4_5_IRQHandler - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_ld.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_ld.s deleted file mode 100644 index af5c92081..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_ld.s +++ /dev/null @@ -1,293 +0,0 @@ -;******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_ld.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x Low Density Devices vector table for RVMDK -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; Stack Configuration -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; Heap Configuration -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1_2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD 0 ; Reserved - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI1_IRQHandler ; SPI1 - DCD 0 ; Reserved - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD 0 ; Reserved - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler routine -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - LDR R0, =__main - BX R0 - ENDP - -; Dummy Exception Handlers (infinite loops which can be modified) - -NMI_Handler PROC - EXPORT NMI_Handler [WEAK] - B . - ENDP -HardFault_Handler\ - PROC - EXPORT HardFault_Handler [WEAK] - B . - ENDP -MemManage_Handler\ - PROC - EXPORT MemManage_Handler [WEAK] - B . - ENDP -BusFault_Handler\ - PROC - EXPORT BusFault_Handler [WEAK] - B . - ENDP -UsageFault_Handler\ - PROC - EXPORT UsageFault_Handler [WEAK] - B . - ENDP -SVC_Handler PROC - EXPORT SVC_Handler [WEAK] - B . - ENDP -DebugMon_Handler\ - PROC - EXPORT DebugMon_Handler [WEAK] - B . - ENDP -PendSV_Handler PROC - EXPORT PendSV_Handler [WEAK] - B . - ENDP -SysTick_Handler PROC - EXPORT SysTick_Handler [WEAK] - B . - ENDP - -Default_Handler PROC - - EXPORT WWDG_IRQHandler [WEAK] - EXPORT PVD_IRQHandler [WEAK] - EXPORT TAMPER_IRQHandler [WEAK] - EXPORT RTC_IRQHandler [WEAK] - EXPORT FLASH_IRQHandler [WEAK] - EXPORT RCC_IRQHandler [WEAK] - EXPORT EXTI0_IRQHandler [WEAK] - EXPORT EXTI1_IRQHandler [WEAK] - EXPORT EXTI2_IRQHandler [WEAK] - EXPORT EXTI3_IRQHandler [WEAK] - EXPORT EXTI4_IRQHandler [WEAK] - EXPORT DMA1_Channel1_IRQHandler [WEAK] - EXPORT DMA1_Channel2_IRQHandler [WEAK] - EXPORT DMA1_Channel3_IRQHandler [WEAK] - EXPORT DMA1_Channel4_IRQHandler [WEAK] - EXPORT DMA1_Channel5_IRQHandler [WEAK] - EXPORT DMA1_Channel6_IRQHandler [WEAK] - EXPORT DMA1_Channel7_IRQHandler [WEAK] - EXPORT ADC1_2_IRQHandler [WEAK] - EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] - EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] - EXPORT CAN1_RX1_IRQHandler [WEAK] - EXPORT CAN1_SCE_IRQHandler [WEAK] - EXPORT EXTI9_5_IRQHandler [WEAK] - EXPORT TIM1_BRK_IRQHandler [WEAK] - EXPORT TIM1_UP_IRQHandler [WEAK] - EXPORT TIM1_TRG_COM_IRQHandler [WEAK] - EXPORT TIM1_CC_IRQHandler [WEAK] - EXPORT TIM2_IRQHandler [WEAK] - EXPORT TIM3_IRQHandler [WEAK] - EXPORT I2C1_EV_IRQHandler [WEAK] - EXPORT I2C1_ER_IRQHandler [WEAK] - EXPORT SPI1_IRQHandler [WEAK] - EXPORT USART1_IRQHandler [WEAK] - EXPORT USART2_IRQHandler [WEAK] - EXPORT EXTI15_10_IRQHandler [WEAK] - EXPORT RTCAlarm_IRQHandler [WEAK] - EXPORT USBWakeUp_IRQHandler [WEAK] - -WWDG_IRQHandler -PVD_IRQHandler -TAMPER_IRQHandler -RTC_IRQHandler -FLASH_IRQHandler -RCC_IRQHandler -EXTI0_IRQHandler -EXTI1_IRQHandler -EXTI2_IRQHandler -EXTI3_IRQHandler -EXTI4_IRQHandler -DMA1_Channel1_IRQHandler -DMA1_Channel2_IRQHandler -DMA1_Channel3_IRQHandler -DMA1_Channel4_IRQHandler -DMA1_Channel5_IRQHandler -DMA1_Channel6_IRQHandler -DMA1_Channel7_IRQHandler -ADC1_2_IRQHandler -USB_HP_CAN1_TX_IRQHandler -USB_LP_CAN1_RX0_IRQHandler -CAN1_RX1_IRQHandler -CAN1_SCE_IRQHandler -EXTI9_5_IRQHandler -TIM1_BRK_IRQHandler -TIM1_UP_IRQHandler -TIM1_TRG_COM_IRQHandler -TIM1_CC_IRQHandler -TIM2_IRQHandler -TIM3_IRQHandler -I2C1_EV_IRQHandler -I2C1_ER_IRQHandler -SPI1_IRQHandler -USART1_IRQHandler -USART2_IRQHandler -EXTI15_10_IRQHandler -RTCAlarm_IRQHandler -USBWakeUp_IRQHandler - - B . - - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE***** diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_md.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_md.s deleted file mode 100644 index dcd7087be..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/arm/startup_stm32f10x_md.s +++ /dev/null @@ -1,238 +0,0 @@ -;******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_md.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x Medium Density Devices vector table for RVMDK -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == Reset_Handler -;* - Set the vector table entries with the exceptions ISR address -;* - Branches to __main in the C library (which eventually -;* calls main()). -;* After Reset the CortexM3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;* <<< Use Configuration Wizard in Context Menu >>> -;******************************************************************************* -; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;******************************************************************************* - -; Amount of memory (in bytes) allocated for Stack -; Tailor this value to your application needs -; Stack Configuration -; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Stack_Size EQU 0x00000400 - - AREA STACK, NOINIT, READWRITE, ALIGN=3 -Stack_Mem SPACE Stack_Size -__initial_sp - - -; Heap Configuration -; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> -; - -Heap_Size EQU 0x00000200 - - AREA HEAP, NOINIT, READWRITE, ALIGN=3 -__heap_base -Heap_Mem SPACE Heap_Size -__heap_limit - - PRESERVE8 - THUMB - - ; Import exceptions handlers - IMPORT NMIException - IMPORT rt_hw_hard_fault - IMPORT MemManageException - IMPORT BusFaultException - IMPORT UsageFaultException - IMPORT SVCHandler - IMPORT DebugMonitor - IMPORT rt_hw_pend_sv - IMPORT SysTickHandler - IMPORT WWDG_IRQHandler - IMPORT PVD_IRQHandler - IMPORT TAMPER_IRQHandler - IMPORT RTC_IRQHandler - IMPORT FLASH_IRQHandler - IMPORT RCC_IRQHandler - IMPORT EXTI0_IRQHandler - IMPORT EXTI1_IRQHandler - IMPORT EXTI2_IRQHandler - IMPORT EXTI3_IRQHandler - IMPORT EXTI4_IRQHandler - IMPORT DMA1_Channel1_IRQHandler - IMPORT DMA1_Channel2_IRQHandler - IMPORT DMA1_Channel3_IRQHandler - IMPORT DMA1_Channel4_IRQHandler - IMPORT DMA1_Channel5_IRQHandler - IMPORT DMA1_Channel6_IRQHandler - IMPORT DMA1_Channel7_IRQHandler - IMPORT ADC1_2_IRQHandler - IMPORT USB_HP_CAN1_TX_IRQHandler - IMPORT USB_LP_CAN1_RX0_IRQHandler - IMPORT CAN1_RX1_IRQHandler - IMPORT CAN1_SCE_IRQHandler - IMPORT EXTI9_5_IRQHandler - IMPORT TIM1_BRK_IRQHandler - IMPORT TIM1_UP_IRQHandler - IMPORT TIM1_TRG_COM_IRQHandler - IMPORT TIM1_CC_IRQHandler - IMPORT TIM2_IRQHandler - IMPORT TIM3_IRQHandler - IMPORT TIM4_IRQHandler - IMPORT I2C1_EV_IRQHandler - IMPORT I2C1_ER_IRQHandler - IMPORT I2C2_EV_IRQHandler - IMPORT I2C2_ER_IRQHandler - IMPORT SPI1_IRQHandler - IMPORT SPI2_IRQHandler - IMPORT USART1_IRQHandler - IMPORT USART2_IRQHandler - IMPORT USART3_IRQHandler - IMPORT EXTI15_10_IRQHandler - IMPORT RTCAlarm_IRQHandler - IMPORT USBWakeUp_IRQHandler - IMPORT TIM8_BRK_IRQHandler - IMPORT TIM8_UP_IRQHandler - IMPORT TIM8_TRG_COM_IRQHandler - IMPORT TIM8_CC_IRQHandler - IMPORT ADC3_IRQHandler - IMPORT FSMC_IRQHandler - IMPORT SDIO_IRQHandler - IMPORT TIM5_IRQHandler - IMPORT SPI3_IRQHandler - IMPORT UART4_IRQHandler - IMPORT UART5_IRQHandler - IMPORT TIM6_IRQHandler - IMPORT TIM7_IRQHandler - IMPORT DMA2_Channel1_IRQHandler - IMPORT DMA2_Channel2_IRQHandler - IMPORT DMA2_Channel3_IRQHandler - IMPORT DMA2_Channel4_5_IRQHandler - - - -; Vector Table Mapped to Address 0 at Reset - AREA RESET, DATA, READONLY - EXPORT __Vectors - EXPORT __Vectors_End - EXPORT __Vectors_Size - -__Vectors DCD __initial_sp ; Top of Stack - DCD Reset_Handler ; Reset Handler - DCD NMIException ; NMI Handler - DCD rt_hw_hard_fault ; Hard Fault Handler - DCD MemManageException ; MPU Fault Handler - DCD BusFaultException ; Bus Fault Handler - DCD UsageFaultException ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVCHandler ; SVCall Handler - DCD DebugMonitor ; Debug Monitor Handler - DCD 0 ; Reserved - DCD rt_hw_pend_sv ; PendSV Handler - DCD SysTickHandler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1_2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend -__Vectors_End - -__Vectors_Size EQU __Vectors_End - __Vectors - - AREA |.text|, CODE, READONLY - -; Reset handler routine -Reset_Handler PROC - EXPORT Reset_Handler [WEAK] - IMPORT __main - LDR R0, =__main - BX R0 - ENDP - - ALIGN - -;******************************************************************************* -; User Stack and Heap initialization -;******************************************************************************* - IF :DEF:__MICROLIB - - EXPORT __initial_sp - EXPORT __heap_base - EXPORT __heap_limit - - ELSE - - IMPORT __use_two_region_memory - EXPORT __user_initial_stackheap - -__user_initial_stackheap - - LDR R0, = Heap_Mem - LDR R1, =(Stack_Mem + Stack_Size) - LDR R2, = (Heap_Mem + Heap_Size) - LDR R3, = Stack_Mem - BX LR - - ALIGN - - ENDIF - - END - -;******************* (C) COPYRIGHT 2009 STMicroelectronics ******** -;******END OF FILE***** diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_cl.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_cl.s deleted file mode 100644 index 885f3c303..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_cl.s +++ /dev/null @@ -1,465 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_cl.s - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief STM32F10x Connectivity line Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR - * address. - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ******************************************************************************* - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global SystemInit_ExtMemCtl_Dummy -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss - -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler - -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word CAN1_TX_IRQHandler - .word CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word OTG_FS_WKUP_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_IRQHandler - .word DMA2_Channel5_IRQHandler - .word ETH_IRQHandler - .word ETH_WKUP_IRQHandler - .word CAN2_TX_IRQHandler - .word CAN2_RX0_IRQHandler - .word CAN2_RX1_IRQHandler - .word CAN2_SCE_IRQHandler - .word OTG_FS_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x Connectivity line Devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak CAN1_TX_IRQHandler - .thumb_set CAN1_TX_IRQHandler,Default_Handler - - .weak CAN1_RX0_IRQHandler - .thumb_set CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak OTG_FS_WKUP_IRQHandler - .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_IRQHandler - .thumb_set DMA2_Channel4_IRQHandler,Default_Handler - - .weak DMA2_Channel5_IRQHandler - .thumb_set DMA2_Channel5_IRQHandler,Default_Handler - - .weak ETH_IRQHandler - .thumb_set ETH_IRQHandler,Default_Handler - - .weak ETH_WKUP_IRQHandler - .thumb_set ETH_WKUP_IRQHandler,Default_Handler - - .weak CAN2_TX_IRQHandler - .thumb_set CAN2_TX_IRQHandler,Default_Handler - - .weak CAN2_RX0_IRQHandler - .thumb_set CAN2_RX0_IRQHandler,Default_Handler - - .weak CAN2_RX1_IRQHandler - .thumb_set CAN2_RX1_IRQHandler,Default_Handler - - .weak CAN2_SCE_IRQHandler - .thumb_set CAN2_SCE_IRQHandler,Default_Handler - - .weak OTG_FS_IRQHandler - .thumb_set OTG_FS_IRQHandler ,Default_Handler - diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_hd.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_hd.s deleted file mode 100644 index 18b1864f5..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_hd.s +++ /dev/null @@ -1,483 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_hd.s - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief STM32F10x High Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address, - * - Configure external SRAM mounted on STM3210E-EVAL board - * to be used as data memory (optional, to be enabled by user) - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ******************************************************************************* - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global SystemInit_ExtMemCtl_Dummy -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss -/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ - -.equ Initial_spTop, 0x20000400 -.equ BootRAM, 0xF1E0F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - bl SystemInit_ExtMemCtl -/* restore original stack pointer */ - LDR r0, =_estack - MSR msp, r0 -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief Dummy SystemInit_ExtMemCtl function - * @param None - * @retval : None -*/ - .section .text.SystemInit_ExtMemCtl_Dummy,"ax",%progbits -SystemInit_ExtMemCtl_Dummy: - bx lr - .size SystemInit_ExtMemCtl_Dummy, .-SystemInit_ExtMemCtl_Dummy - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word Initial_spTop - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word TIM8_BRK_IRQHandler - .word TIM8_UP_IRQHandler - .word TIM8_TRG_COM_IRQHandler - .word TIM8_CC_IRQHandler - .word ADC3_IRQHandler - .word FSMC_IRQHandler - .word SDIO_IRQHandler - .word TIM5_IRQHandler - .word SPI3_IRQHandler - .word UART4_IRQHandler - .word UART5_IRQHandler - .word TIM6_IRQHandler - .word TIM7_IRQHandler - .word DMA2_Channel1_IRQHandler - .word DMA2_Channel2_IRQHandler - .word DMA2_Channel3_IRQHandler - .word DMA2_Channel4_5_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x1E0. This is for boot in RAM mode for - STM32F10x High Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - .weak TIM8_BRK_IRQHandler - .thumb_set TIM8_BRK_IRQHandler,Default_Handler - - .weak TIM8_UP_IRQHandler - .thumb_set TIM8_UP_IRQHandler,Default_Handler - - .weak TIM8_TRG_COM_IRQHandler - .thumb_set TIM8_TRG_COM_IRQHandler,Default_Handler - - .weak TIM8_CC_IRQHandler - .thumb_set TIM8_CC_IRQHandler,Default_Handler - - .weak ADC3_IRQHandler - .thumb_set ADC3_IRQHandler,Default_Handler - - .weak FSMC_IRQHandler - .thumb_set FSMC_IRQHandler,Default_Handler - - .weak SDIO_IRQHandler - .thumb_set SDIO_IRQHandler,Default_Handler - - .weak TIM5_IRQHandler - .thumb_set TIM5_IRQHandler,Default_Handler - - .weak SPI3_IRQHandler - .thumb_set SPI3_IRQHandler,Default_Handler - - .weak UART4_IRQHandler - .thumb_set UART4_IRQHandler,Default_Handler - - .weak UART5_IRQHandler - .thumb_set UART5_IRQHandler,Default_Handler - - .weak TIM6_IRQHandler - .thumb_set TIM6_IRQHandler,Default_Handler - - .weak TIM7_IRQHandler - .thumb_set TIM7_IRQHandler,Default_Handler - - .weak DMA2_Channel1_IRQHandler - .thumb_set DMA2_Channel1_IRQHandler,Default_Handler - - .weak DMA2_Channel2_IRQHandler - .thumb_set DMA2_Channel2_IRQHandler,Default_Handler - - .weak DMA2_Channel3_IRQHandler - .thumb_set DMA2_Channel3_IRQHandler,Default_Handler - - .weak DMA2_Channel4_5_IRQHandler - .thumb_set DMA2_Channel4_5_IRQHandler,Default_Handler - - .weak SystemInit_ExtMemCtl - .thumb_set SystemInit_ExtMemCtl,SystemInit_ExtMemCtl_Dummy - diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_ld.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_ld.s deleted file mode 100644 index 8a99e3a3d..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_ld.s +++ /dev/null @@ -1,340 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_ld.s - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief STM32F10x Low Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address. - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ******************************************************************************* - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global SystemInit_ExtMemCtl_Dummy -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - 0 - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - 0 - 0 - .word SPI1_IRQHandler - 0 - .word USART1_IRQHandler - .word USART2_IRQHandler - 0 - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Low Density devices.*/ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_md.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_md.s deleted file mode 100644 index 0aa1cf8ad..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/gcc/startup_stm32f10x_md.s +++ /dev/null @@ -1,356 +0,0 @@ -/** - ****************************************************************************** - * @file startup_stm32f10x_md.s - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief STM32F10x Medium Density Devices vector table for RIDE7 toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ******************************************************************************* - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global SystemInit_ExtMemCtl_Dummy -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - movs r1, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r3, =_sidata - ldr r3, [r3, r1] - str r3, [r0, r1] - adds r1, r1, #4 - -LoopCopyDataInit: - ldr r0, =_sdata - ldr r3, =_edata - adds r2, r0, r1 - cmp r2, r3 - bcc CopyDataInit - ldr r2, =_sbss - b LoopFillZerobss -/* Zero fill the bss segment. */ -FillZerobss: - movs r3, #0 - str r3, [r2], #4 - -LoopFillZerobss: - ldr r3, = _ebss - cmp r2, r3 - bcc FillZerobss -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTCAlarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Medium Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTCAlarm_IRQHandler - .thumb_set RTCAlarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - - diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_cl.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_cl.s deleted file mode 100644 index c552fc7ea..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_cl.s +++ /dev/null @@ -1,498 +0,0 @@ -;/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_cl.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x Connectivity line devices vector table for -;* EWARM5.x toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;*******************************************************************************/ -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD __iar_program_start - - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 and ADC2 - DCD CAN1_TX_IRQHandler ; CAN1 TX - DCD CAN1_RX0_IRQHandler ; CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C1 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC alarm through EXTI line - DCD OTG_FS_WKUP_IRQHandler ; USB OTG FS Wakeup through EXTI line - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_IRQHandler ; DMA2 Channel4 - DCD DMA2_Channel5_IRQHandler ; DMA2 Channel5 - DCD ETH_IRQHandler ; Ethernet - DCD ETH_WKUP_IRQHandler ; Ethernet Wakeup through EXTI line - DCD CAN2_TX_IRQHandler ; CAN2 TX - DCD CAN2_RX0_IRQHandler ; CAN2 RX0 - DCD CAN2_RX1_IRQHandler ; CAN2 RX1 - DCD CAN2_SCE_IRQHandler ; CAN2 SCE - DCD OTG_FS_IRQHandler ; USB OTG FS - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_TX_IRQHandler - B CAN1_TX_IRQHandler - - PUBWEAK CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX0_IRQHandler - B CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK OTG_FS_WKUP_IRQHandler - SECTION .text:CODE:REORDER(1) -OTG_FS_WKUP_IRQHandler - B OTG_FS_WKUP_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel4_IRQHandler - B DMA2_Channel4_IRQHandler - - PUBWEAK DMA2_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel5_IRQHandler - B DMA2_Channel5_IRQHandler - - PUBWEAK ETH_IRQHandler - SECTION .text:CODE:REORDER(1) -ETH_IRQHandler - B ETH_IRQHandler - - PUBWEAK ETH_WKUP_IRQHandler - SECTION .text:CODE:REORDER(1) -ETH_WKUP_IRQHandler - B ETH_WKUP_IRQHandler - - PUBWEAK CAN2_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_TX_IRQHandler - B CAN2_TX_IRQHandler - - PUBWEAK CAN2_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_RX0_IRQHandler - B CAN2_RX0_IRQHandler - - PUBWEAK CAN2_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_RX1_IRQHandler - B CAN2_RX1_IRQHandler - - PUBWEAK CAN2_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN2_SCE_IRQHandler - B CAN2_SCE_IRQHandler - - PUBWEAK OTG_FS_IRQHandler - SECTION .text:CODE:REORDER(1) -OTG_FS_IRQHandler - B OTG_FS_IRQHandler - - END -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_hd.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_hd.s deleted file mode 100644 index 3b654eb0d..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_hd.s +++ /dev/null @@ -1,510 +0,0 @@ -;/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_hd.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x High Density Devices vector table for EWARM5.x -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR address, -;* - Configure external SRAM mounted on STM3210E-EVAL board -;* to be used as data memory (optional, to be enabled by user) -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;*******************************************************************************/ -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; ICODE is the same segment as cstartup. By placing __low_level_init - ;; in the same segment, we make sure it can be reached with BL. */ - - SECTION CSTACK:DATA:NOROOT(3) - SECTION .icode:CODE:NOROOT(2) - PUBLIC __low_level_init - - PUBWEAK SystemInit_ExtMemCtl - SECTION .text:CODE:REORDER(2) - THUMB -SystemInit_ExtMemCtl - BX LR - -__low_level_init: - - ;; Initialize hardware. - LDR R0, = SystemInit_ExtMemCtl ; initialize external memory controller - MOV R11, LR - BLX R0 - LDR R1, =sfe(CSTACK) ; restore original stack pointer - MSR MSP, R1 - MOV R0,#1 - ;; Return with BX to be independent of mode of caller - BX R11 - - ;; Forward declaration of sections. - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - PUBLIC __vector_table - - DATA -__intial_sp EQU 0x20000400 -__vector_table - DCD __intial_sp - DCD __iar_program_start - - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - DCD TIM8_BRK_IRQHandler ; TIM8 Break - DCD TIM8_UP_IRQHandler ; TIM8 Update - DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation - DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare - DCD ADC3_IRQHandler ; ADC3 - DCD FSMC_IRQHandler ; FSMC - DCD SDIO_IRQHandler ; SDIO - DCD TIM5_IRQHandler ; TIM5 - DCD SPI3_IRQHandler ; SPI3 - DCD UART4_IRQHandler ; UART4 - DCD UART5_IRQHandler ; UART5 - DCD TIM6_IRQHandler ; TIM6 - DCD TIM7_IRQHandler ; TIM7 - DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1 - DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2 - DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3 - DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5 -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - PUBWEAK TIM8_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_BRK_IRQHandler - B TIM8_BRK_IRQHandler - - PUBWEAK TIM8_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_UP_IRQHandler - B TIM8_UP_IRQHandler - - PUBWEAK TIM8_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_TRG_COM_IRQHandler - B TIM8_TRG_COM_IRQHandler - - PUBWEAK TIM8_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM8_CC_IRQHandler - B TIM8_CC_IRQHandler - - PUBWEAK ADC3_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC3_IRQHandler - B ADC3_IRQHandler - - PUBWEAK FSMC_IRQHandler - SECTION .text:CODE:REORDER(1) -FSMC_IRQHandler - B FSMC_IRQHandler - - PUBWEAK SDIO_IRQHandler - SECTION .text:CODE:REORDER(1) -SDIO_IRQHandler - B SDIO_IRQHandler - - PUBWEAK TIM5_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM5_IRQHandler - B TIM5_IRQHandler - - PUBWEAK SPI3_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI3_IRQHandler - B SPI3_IRQHandler - - PUBWEAK UART4_IRQHandler - SECTION .text:CODE:REORDER(1) -UART4_IRQHandler - B UART4_IRQHandler - - PUBWEAK UART5_IRQHandler - SECTION .text:CODE:REORDER(1) -UART5_IRQHandler - B UART5_IRQHandler - - PUBWEAK TIM6_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM6_IRQHandler - B TIM6_IRQHandler - - PUBWEAK TIM7_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM7_IRQHandler - B TIM7_IRQHandler - - PUBWEAK DMA2_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel1_IRQHandler - B DMA2_Channel1_IRQHandler - - PUBWEAK DMA2_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel2_IRQHandler - B DMA2_Channel2_IRQHandler - - PUBWEAK DMA2_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel3_IRQHandler - B DMA2_Channel3_IRQHandler - - PUBWEAK DMA2_Channel4_5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA2_Channel4_5_IRQHandler - B DMA2_Channel4_5_IRQHandler - - - END - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_ld.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_ld.s deleted file mode 100644 index 8abcd8db6..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_ld.s +++ /dev/null @@ -1,357 +0,0 @@ -;/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_ld.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x Low Density Devices vector table for EWARM5.x -;* toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;*******************************************************************************/ -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD __iar_program_start - - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD 0 ; Reserved - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SPI1_IRQHandler ; SPI1 - DCD 0 ; Reserved - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD 0 ; Reserved - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - END -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_md.s b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_md.s deleted file mode 100644 index c0610972a..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/startup/iar/startup_stm32f10x_md.s +++ /dev/null @@ -1,382 +0,0 @@ -;/******************** (C) COPYRIGHT 2009 STMicroelectronics ******************** -;* File Name : startup_stm32f10x_md.s -;* Author : MCD Application Team -;* Version : V3.1.0 -;* Date : 06/19/2009 -;* Description : STM32F10x Medium Density Devices vector table for -;* EWARM5.x toolchain. -;* This module performs: -;* - Set the initial SP -;* - Set the initial PC == __iar_program_start, -;* - Set the vector table entries with the exceptions ISR -;* address. -;* After Reset the Cortex-M3 processor is in Thread mode, -;* priority is Privileged, and the Stack is set to Main. -;******************************************************************************** -;* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS -;* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. -;* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, -;* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE -;* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING -;* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. -;*******************************************************************************/ -; -; -; The modules in this file are included in the libraries, and may be replaced -; by any user-defined modules that define the PUBLIC symbol _program_start or -; a user defined start symbol. -; To override the cstartup defined in the library, simply add your modified -; version to the workbench project. -; -; The vector table is normally located at address 0. -; When debugging in RAM, it can be located in RAM, aligned to at least 2^6. -; The name "__vector_table" has special meaning for C-SPY: -; it is where the SP start value is found, and the NVIC vector -; table register (VTOR) is initialized to this address if != 0. -; -; Cortex-M version -; - - MODULE ?cstartup - - ;; Forward declaration of sections. - SECTION CSTACK:DATA:NOROOT(3) - - SECTION .intvec:CODE:NOROOT(2) - - EXTERN __iar_program_start - PUBLIC __vector_table - - DATA -__vector_table - DCD sfe(CSTACK) - DCD __iar_program_start - - DCD NMI_Handler ; NMI Handler - DCD HardFault_Handler ; Hard Fault Handler - DCD MemManage_Handler ; MPU Fault Handler - DCD BusFault_Handler ; Bus Fault Handler - DCD UsageFault_Handler ; Usage Fault Handler - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD 0 ; Reserved - DCD SVC_Handler ; SVCall Handler - DCD DebugMon_Handler ; Debug Monitor Handler - DCD 0 ; Reserved - DCD PendSV_Handler ; PendSV Handler - DCD SysTick_Handler ; SysTick Handler - - ; External Interrupts - DCD WWDG_IRQHandler ; Window Watchdog - DCD PVD_IRQHandler ; PVD through EXTI Line detect - DCD TAMPER_IRQHandler ; Tamper - DCD RTC_IRQHandler ; RTC - DCD FLASH_IRQHandler ; Flash - DCD RCC_IRQHandler ; RCC - DCD EXTI0_IRQHandler ; EXTI Line 0 - DCD EXTI1_IRQHandler ; EXTI Line 1 - DCD EXTI2_IRQHandler ; EXTI Line 2 - DCD EXTI3_IRQHandler ; EXTI Line 3 - DCD EXTI4_IRQHandler ; EXTI Line 4 - DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 - DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 - DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 - DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 - DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 - DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 - DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 - DCD ADC1_2_IRQHandler ; ADC1 & ADC2 - DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX - DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 - DCD CAN1_RX1_IRQHandler ; CAN1 RX1 - DCD CAN1_SCE_IRQHandler ; CAN1 SCE - DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 - DCD TIM1_BRK_IRQHandler ; TIM1 Break - DCD TIM1_UP_IRQHandler ; TIM1 Update - DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation - DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare - DCD TIM2_IRQHandler ; TIM2 - DCD TIM3_IRQHandler ; TIM3 - DCD TIM4_IRQHandler ; TIM4 - DCD I2C1_EV_IRQHandler ; I2C1 Event - DCD I2C1_ER_IRQHandler ; I2C1 Error - DCD I2C2_EV_IRQHandler ; I2C2 Event - DCD I2C2_ER_IRQHandler ; I2C2 Error - DCD SPI1_IRQHandler ; SPI1 - DCD SPI2_IRQHandler ; SPI2 - DCD USART1_IRQHandler ; USART1 - DCD USART2_IRQHandler ; USART2 - DCD USART3_IRQHandler ; USART3 - DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 - DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line - DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;; -;; Default interrupt handlers. -;; - THUMB - - PUBWEAK NMI_Handler - SECTION .text:CODE:REORDER(1) -NMI_Handler - B NMI_Handler - - PUBWEAK HardFault_Handler - SECTION .text:CODE:REORDER(1) -HardFault_Handler - B HardFault_Handler - - PUBWEAK MemManage_Handler - SECTION .text:CODE:REORDER(1) -MemManage_Handler - B MemManage_Handler - - PUBWEAK BusFault_Handler - SECTION .text:CODE:REORDER(1) -BusFault_Handler - B BusFault_Handler - - PUBWEAK UsageFault_Handler - SECTION .text:CODE:REORDER(1) -UsageFault_Handler - B UsageFault_Handler - - PUBWEAK SVC_Handler - SECTION .text:CODE:REORDER(1) -SVC_Handler - B SVC_Handler - - PUBWEAK DebugMon_Handler - SECTION .text:CODE:REORDER(1) -DebugMon_Handler - B DebugMon_Handler - - PUBWEAK PendSV_Handler - SECTION .text:CODE:REORDER(1) -PendSV_Handler - B PendSV_Handler - - PUBWEAK SysTick_Handler - SECTION .text:CODE:REORDER(1) -SysTick_Handler - B SysTick_Handler - - PUBWEAK WWDG_IRQHandler - SECTION .text:CODE:REORDER(1) -WWDG_IRQHandler - B WWDG_IRQHandler - - PUBWEAK PVD_IRQHandler - SECTION .text:CODE:REORDER(1) -PVD_IRQHandler - B PVD_IRQHandler - - PUBWEAK TAMPER_IRQHandler - SECTION .text:CODE:REORDER(1) -TAMPER_IRQHandler - B TAMPER_IRQHandler - - PUBWEAK RTC_IRQHandler - SECTION .text:CODE:REORDER(1) -RTC_IRQHandler - B RTC_IRQHandler - - PUBWEAK FLASH_IRQHandler - SECTION .text:CODE:REORDER(1) -FLASH_IRQHandler - B FLASH_IRQHandler - - PUBWEAK RCC_IRQHandler - SECTION .text:CODE:REORDER(1) -RCC_IRQHandler - B RCC_IRQHandler - - PUBWEAK EXTI0_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI0_IRQHandler - B EXTI0_IRQHandler - - PUBWEAK EXTI1_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI1_IRQHandler - B EXTI1_IRQHandler - - PUBWEAK EXTI2_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI2_IRQHandler - B EXTI2_IRQHandler - - PUBWEAK EXTI3_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI3_IRQHandler - B EXTI3_IRQHandler - - PUBWEAK EXTI4_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI4_IRQHandler - B EXTI4_IRQHandler - - PUBWEAK DMA1_Channel1_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel1_IRQHandler - B DMA1_Channel1_IRQHandler - - PUBWEAK DMA1_Channel2_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel2_IRQHandler - B DMA1_Channel2_IRQHandler - - PUBWEAK DMA1_Channel3_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel3_IRQHandler - B DMA1_Channel3_IRQHandler - - PUBWEAK DMA1_Channel4_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel4_IRQHandler - B DMA1_Channel4_IRQHandler - - PUBWEAK DMA1_Channel5_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel5_IRQHandler - B DMA1_Channel5_IRQHandler - - PUBWEAK DMA1_Channel6_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel6_IRQHandler - B DMA1_Channel6_IRQHandler - - PUBWEAK DMA1_Channel7_IRQHandler - SECTION .text:CODE:REORDER(1) -DMA1_Channel7_IRQHandler - B DMA1_Channel7_IRQHandler - - PUBWEAK ADC1_2_IRQHandler - SECTION .text:CODE:REORDER(1) -ADC1_2_IRQHandler - B ADC1_2_IRQHandler - - PUBWEAK USB_HP_CAN1_TX_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_HP_CAN1_TX_IRQHandler - B USB_HP_CAN1_TX_IRQHandler - - PUBWEAK USB_LP_CAN1_RX0_IRQHandler - SECTION .text:CODE:REORDER(1) -USB_LP_CAN1_RX0_IRQHandler - B USB_LP_CAN1_RX0_IRQHandler - - PUBWEAK CAN1_RX1_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_RX1_IRQHandler - B CAN1_RX1_IRQHandler - - PUBWEAK CAN1_SCE_IRQHandler - SECTION .text:CODE:REORDER(1) -CAN1_SCE_IRQHandler - B CAN1_SCE_IRQHandler - - PUBWEAK EXTI9_5_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI9_5_IRQHandler - B EXTI9_5_IRQHandler - - PUBWEAK TIM1_BRK_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_BRK_IRQHandler - B TIM1_BRK_IRQHandler - - PUBWEAK TIM1_UP_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_UP_IRQHandler - B TIM1_UP_IRQHandler - - PUBWEAK TIM1_TRG_COM_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_TRG_COM_IRQHandler - B TIM1_TRG_COM_IRQHandler - - PUBWEAK TIM1_CC_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM1_CC_IRQHandler - B TIM1_CC_IRQHandler - - PUBWEAK TIM2_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM2_IRQHandler - B TIM2_IRQHandler - - PUBWEAK TIM3_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM3_IRQHandler - B TIM3_IRQHandler - - PUBWEAK TIM4_IRQHandler - SECTION .text:CODE:REORDER(1) -TIM4_IRQHandler - B TIM4_IRQHandler - - PUBWEAK I2C1_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_EV_IRQHandler - B I2C1_EV_IRQHandler - - PUBWEAK I2C1_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C1_ER_IRQHandler - B I2C1_ER_IRQHandler - - PUBWEAK I2C2_EV_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_EV_IRQHandler - B I2C2_EV_IRQHandler - - PUBWEAK I2C2_ER_IRQHandler - SECTION .text:CODE:REORDER(1) -I2C2_ER_IRQHandler - B I2C2_ER_IRQHandler - - PUBWEAK SPI1_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI1_IRQHandler - B SPI1_IRQHandler - - PUBWEAK SPI2_IRQHandler - SECTION .text:CODE:REORDER(1) -SPI2_IRQHandler - B SPI2_IRQHandler - - PUBWEAK USART1_IRQHandler - SECTION .text:CODE:REORDER(1) -USART1_IRQHandler - B USART1_IRQHandler - - PUBWEAK USART2_IRQHandler - SECTION .text:CODE:REORDER(1) -USART2_IRQHandler - B USART2_IRQHandler - - PUBWEAK USART3_IRQHandler - SECTION .text:CODE:REORDER(1) -USART3_IRQHandler - B USART3_IRQHandler - - PUBWEAK EXTI15_10_IRQHandler - SECTION .text:CODE:REORDER(1) -EXTI15_10_IRQHandler - B EXTI15_10_IRQHandler - - PUBWEAK RTCAlarm_IRQHandler - SECTION .text:CODE:REORDER(1) -RTCAlarm_IRQHandler - B RTCAlarm_IRQHandler - - PUBWEAK USBWakeUp_IRQHandler - SECTION .text:CODE:REORDER(1) -USBWakeUp_IRQHandler - B USBWakeUp_IRQHandler - - END -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/stm32f10x.h b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/stm32f10x.h deleted file mode 100644 index d53cb8dd9..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/stm32f10x.h +++ /dev/null @@ -1,7851 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F10x Connectivity line, High - * density, Medium density and Low density devices. - ****************************************************************************** - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x - * @{ - */ - -#ifndef __STM32F10x_H -#define __STM32F10x_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup Library_configuration_section - * @{ - */ - -/* Uncomment the line below according to the target STM32 device used in your - application - */ - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_MD) && !defined (STM32F10X_HD) && !defined (STM32F10X_CL) - /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ - /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ - /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ - #define STM32F10X_CL /*!< STM32F10X_CL: STM32 Connectivity line devices */ -#endif -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - - - Low density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers - where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers - where the Flash memory density ranges between 64 and 128 Kbytes. - - High density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - */ - -#if !defined USE_STDPERIPH_DRIVER -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_STDPERIPH_DRIVER*/ -#endif - -/** - * @brief In the following line adjust the value of External High Speed oscillator (HSE) - used in your application - - Tip: To avoid modifying this file each time you need to use different HSE, you - can define the HSE value in your toolchain compiler preprocessor. - */ -#if !defined HSE_Value - #ifdef STM32F10X_CL - #define HSE_Value ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ - #else - #define HSE_Value ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ - #endif /* STM32F10X_CL */ -#endif /* HSE_Value */ - - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - Timeout value - */ -#define HSEStartUp_TimeOut ((uint16_t)0x0500) /*!< Time out for HSE start up */ - -#define HSI_Value ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ - -/** - * @brief STM32F10x Standard Peripheral Library version number - */ -#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:16] STM32F10x Standard Peripheral Library main version */ -#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x01) /*!< [15:8] STM32F10x Standard Peripheral Library sub1 version */ -#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [7:0] STM32F10x Standard Peripheral Library sub2 version */ -#define __STM32F10X_STDPERIPH_VERSION ((__STM32F10X_STDPERIPH_VERSION_MAIN << 16)\ - | (__STM32F10X_STDPERIPH_VERSION_SUB1 << 8)\ - | __STM32F10X_STDPERIPH_VERSION_SUB2) - -/** - * @} - */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M3 Processor and Core Peripherals - */ -#define __MPU_PRESENT 0 /*!< STM32 does not provide an MPU */ -#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ - -/** - * @brief STM32F10x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum IRQn -{ -/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ - -/****** STM32 specific Interrupt Numbers *********************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMPER_IRQn = 2, /*!< Tamper Interrupt */ - RTC_IRQn = 3, /*!< RTC global Interrupt */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ - DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ - DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ - DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ - DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ - DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ - DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - -#ifdef STM32F10X_LD - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -#endif /* STM32F10X_LD */ - -#ifdef STM32F10X_MD - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -#endif /* STM32F10X_MD */ - -#ifdef STM32F10X_HD - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ - TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ - TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ - TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ - FSMC_IRQn = 48, /*!< FSMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_CL - CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ - DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ -#endif /* STM32F10X_CL */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm3.h" -#include "system_stm32f10x.h" -#include - -/** @addtogroup Exported_types - * @{ - */ - -/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ -typedef int32_t s32; -typedef int16_t s16; -typedef int8_t s8; - -typedef const int32_t sc32; /*!< Read Only */ -typedef const int16_t sc16; /*!< Read Only */ -typedef const int8_t sc8; /*!< Read Only */ - -typedef __IO int32_t vs32; -typedef __IO int16_t vs16; -typedef __IO int8_t vs8; - -typedef __I int32_t vsc32; /*!< Read Only */ -typedef __I int16_t vsc16; /*!< Read Only */ -typedef __I int8_t vsc8; /*!< Read Only */ - -typedef uint32_t u32; -typedef uint16_t u16; -typedef uint8_t u8; - -typedef const uint32_t uc32; /*!< Read Only */ -typedef const uint16_t uc16; /*!< Read Only */ -typedef const uint8_t uc8; /*!< Read Only */ - -typedef __IO uint32_t vu32; -typedef __IO uint16_t vu16; -typedef __IO uint8_t vu8; - -typedef __I uint32_t vuc32; /*!< Read Only */ -typedef __I uint16_t vuc16; /*!< Read Only */ -typedef __I uint8_t vuc8; /*!< Read Only */ - -#ifndef __cplusplus -typedef enum {FALSE = 0, TRUE = !FALSE} bool; -#endif - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -/** - * @} - */ - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t SR; - __IO uint32_t CR1; - __IO uint32_t CR2; - __IO uint32_t SMPR1; - __IO uint32_t SMPR2; - __IO uint32_t JOFR1; - __IO uint32_t JOFR2; - __IO uint32_t JOFR3; - __IO uint32_t JOFR4; - __IO uint32_t HTR; - __IO uint32_t LTR; - __IO uint32_t SQR1; - __IO uint32_t SQR2; - __IO uint32_t SQR3; - __IO uint32_t JSQR; - __IO uint32_t JDR1; - __IO uint32_t JDR2; - __IO uint32_t JDR3; - __IO uint32_t JDR4; - __IO uint32_t DR; -} ADC_TypeDef; - -/** - * @brief Backup Registers - */ - -typedef struct -{ - uint32_t RESERVED0; - __IO uint16_t DR1; - uint16_t RESERVED1; - __IO uint16_t DR2; - uint16_t RESERVED2; - __IO uint16_t DR3; - uint16_t RESERVED3; - __IO uint16_t DR4; - uint16_t RESERVED4; - __IO uint16_t DR5; - uint16_t RESERVED5; - __IO uint16_t DR6; - uint16_t RESERVED6; - __IO uint16_t DR7; - uint16_t RESERVED7; - __IO uint16_t DR8; - uint16_t RESERVED8; - __IO uint16_t DR9; - uint16_t RESERVED9; - __IO uint16_t DR10; - uint16_t RESERVED10; - __IO uint16_t RTCCR; - uint16_t RESERVED11; - __IO uint16_t CR; - uint16_t RESERVED12; - __IO uint16_t CSR; - uint16_t RESERVED13[5]; - __IO uint16_t DR11; - uint16_t RESERVED14; - __IO uint16_t DR12; - uint16_t RESERVED15; - __IO uint16_t DR13; - uint16_t RESERVED16; - __IO uint16_t DR14; - uint16_t RESERVED17; - __IO uint16_t DR15; - uint16_t RESERVED18; - __IO uint16_t DR16; - uint16_t RESERVED19; - __IO uint16_t DR17; - uint16_t RESERVED20; - __IO uint16_t DR18; - uint16_t RESERVED21; - __IO uint16_t DR19; - uint16_t RESERVED22; - __IO uint16_t DR20; - uint16_t RESERVED23; - __IO uint16_t DR21; - uint16_t RESERVED24; - __IO uint16_t DR22; - uint16_t RESERVED25; - __IO uint16_t DR23; - uint16_t RESERVED26; - __IO uint16_t DR24; - uint16_t RESERVED27; - __IO uint16_t DR25; - uint16_t RESERVED28; - __IO uint16_t DR26; - uint16_t RESERVED29; - __IO uint16_t DR27; - uint16_t RESERVED30; - __IO uint16_t DR28; - uint16_t RESERVED31; - __IO uint16_t DR29; - uint16_t RESERVED32; - __IO uint16_t DR30; - uint16_t RESERVED33; - __IO uint16_t DR31; - uint16_t RESERVED34; - __IO uint16_t DR32; - uint16_t RESERVED35; - __IO uint16_t DR33; - uint16_t RESERVED36; - __IO uint16_t DR34; - uint16_t RESERVED37; - __IO uint16_t DR35; - uint16_t RESERVED38; - __IO uint16_t DR36; - uint16_t RESERVED39; - __IO uint16_t DR37; - uint16_t RESERVED40; - __IO uint16_t DR38; - uint16_t RESERVED41; - __IO uint16_t DR39; - uint16_t RESERVED42; - __IO uint16_t DR40; - uint16_t RESERVED43; - __IO uint16_t DR41; - uint16_t RESERVED44; - __IO uint16_t DR42; - uint16_t RESERVED45; -} BKP_TypeDef; - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; - __IO uint32_t TDTR; - __IO uint32_t TDLR; - __IO uint32_t TDHR; -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; - __IO uint32_t RDTR; - __IO uint32_t RDLR; - __IO uint32_t RDHR; -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; - __IO uint32_t FR2; -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; - __IO uint32_t MSR; - __IO uint32_t TSR; - __IO uint32_t RF0R; - __IO uint32_t RF1R; - __IO uint32_t IER; - __IO uint32_t ESR; - __IO uint32_t BTR; - uint32_t RESERVED0[88]; - CAN_TxMailBox_TypeDef sTxMailBox[3]; - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; - uint32_t RESERVED1[12]; - __IO uint32_t FMR; - __IO uint32_t FM1R; - uint32_t RESERVED2; - __IO uint32_t FS1R; - uint32_t RESERVED3; - __IO uint32_t FFA1R; - uint32_t RESERVED4; - __IO uint32_t FA1R; - uint32_t RESERVED5[8]; -#ifndef STM32F10X_CL - CAN_FilterRegister_TypeDef sFilterRegister[14]; -#else - CAN_FilterRegister_TypeDef sFilterRegister[28]; -#endif /* STM32F10X_CL */ -} CAN_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; - __IO uint8_t IDR; - uint8_t RESERVED0; - uint16_t RESERVED1; - __IO uint32_t CR; -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t SWTRIGR; - __IO uint32_t DHR12R1; - __IO uint32_t DHR12L1; - __IO uint32_t DHR8R1; - __IO uint32_t DHR12R2; - __IO uint32_t DHR12L2; - __IO uint32_t DHR8R2; - __IO uint32_t DHR12RD; - __IO uint32_t DHR12LD; - __IO uint32_t DHR8RD; - __IO uint32_t DOR1; - __IO uint32_t DOR2; -} DAC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; - __IO uint32_t CR; -}DBGMCU_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; - __IO uint32_t CNDTR; - __IO uint32_t CPAR; - __IO uint32_t CMAR; -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; - __IO uint32_t IFCR; -} DMA_TypeDef; - -/** - * @brief Ethernet MAC - */ - -typedef struct -{ - __IO uint32_t MACCR; - __IO uint32_t MACFFR; - __IO uint32_t MACHTHR; - __IO uint32_t MACHTLR; - __IO uint32_t MACMIIAR; - __IO uint32_t MACMIIDR; - __IO uint32_t MACFCR; - __IO uint32_t MACVLANTR; /* 8 */ - uint32_t RESERVED0[2]; - __IO uint32_t MACRWUFFR; /* 11 */ - __IO uint32_t MACPMTCSR; - uint32_t RESERVED1[2]; - __IO uint32_t MACSR; /* 15 */ - __IO uint32_t MACIMR; - __IO uint32_t MACA0HR; - __IO uint32_t MACA0LR; - __IO uint32_t MACA1HR; - __IO uint32_t MACA1LR; - __IO uint32_t MACA2HR; - __IO uint32_t MACA2LR; - __IO uint32_t MACA3HR; - __IO uint32_t MACA3LR; /* 24 */ - uint32_t RESERVED2[40]; - __IO uint32_t MMCCR; /* 65 */ - __IO uint32_t MMCRIR; - __IO uint32_t MMCTIR; - __IO uint32_t MMCRIMR; - __IO uint32_t MMCTIMR; /* 69 */ - uint32_t RESERVED3[14]; - __IO uint32_t MMCTGFSCCR; /* 84 */ - __IO uint32_t MMCTGFMSCCR; - uint32_t RESERVED4[5]; - __IO uint32_t MMCTGFCR; - uint32_t RESERVED5[10]; - __IO uint32_t MMCRFCECR; - __IO uint32_t MMCRFAECR; - uint32_t RESERVED6[10]; - __IO uint32_t MMCRGUFCR; - uint32_t RESERVED7[334]; - __IO uint32_t PTPTSCR; - __IO uint32_t PTPSSIR; - __IO uint32_t PTPTSHR; - __IO uint32_t PTPTSLR; - __IO uint32_t PTPTSHUR; - __IO uint32_t PTPTSLUR; - __IO uint32_t PTPTSAR; - __IO uint32_t PTPTTHR; - __IO uint32_t PTPTTLR; - uint32_t RESERVED8[567]; - __IO uint32_t DMABMR; - __IO uint32_t DMATPDR; - __IO uint32_t DMARPDR; - __IO uint32_t DMARDLAR; - __IO uint32_t DMATDLAR; - __IO uint32_t DMASR; - __IO uint32_t DMAOMR; - __IO uint32_t DMAIER; - __IO uint32_t DMAMFBOCR; - uint32_t RESERVED9[9]; - __IO uint32_t DMACHTDR; - __IO uint32_t DMACHRDR; - __IO uint32_t DMACHTBAR; - __IO uint32_t DMACHRBAR; -} ETH_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; - __IO uint32_t EMR; - __IO uint32_t RTSR; - __IO uint32_t FTSR; - __IO uint32_t SWIER; - __IO uint32_t PR; -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; - __IO uint32_t KEYR; - __IO uint32_t OPTKEYR; - __IO uint32_t SR; - __IO uint32_t CR; - __IO uint32_t AR; - __IO uint32_t RESERVED; - __IO uint32_t OBR; - __IO uint32_t WRPR; -} FLASH_TypeDef; - -/** - * @brief Option Bytes Registers - */ - -typedef struct -{ - __IO uint16_t RDP; - __IO uint16_t USER; - __IO uint16_t Data0; - __IO uint16_t Data1; - __IO uint16_t WRP0; - __IO uint16_t WRP1; - __IO uint16_t WRP2; - __IO uint16_t WRP3; -} OB_TypeDef; - -/** - * @brief Flexible Static Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; -} FSMC_Bank1_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; -} FSMC_Bank1E_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank2 - */ - -typedef struct -{ - __IO uint32_t PCR2; - __IO uint32_t SR2; - __IO uint32_t PMEM2; - __IO uint32_t PATT2; - uint32_t RESERVED0; - __IO uint32_t ECCR2; -} FSMC_Bank2_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR3; - __IO uint32_t SR3; - __IO uint32_t PMEM3; - __IO uint32_t PATT3; - uint32_t RESERVED0; - __IO uint32_t ECCR3; -} FSMC_Bank3_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank4 - */ - -typedef struct -{ - __IO uint32_t PCR4; - __IO uint32_t SR4; - __IO uint32_t PMEM4; - __IO uint32_t PATT4; - __IO uint32_t PIO4; -} FSMC_Bank4_TypeDef; - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t CRL; - __IO uint32_t CRH; - __IO uint32_t IDR; - __IO uint32_t ODR; - __IO uint32_t BSRR; - __IO uint32_t BRR; - __IO uint32_t LCKR; -} GPIO_TypeDef; - -/** - * @brief Alternate Function I/O - */ - -typedef struct -{ - __IO uint32_t EVCR; - __IO uint32_t MAPR; - __IO uint32_t EXTICR[4]; -} AFIO_TypeDef; -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t OAR1; - uint16_t RESERVED2; - __IO uint16_t OAR2; - uint16_t RESERVED3; - __IO uint16_t DR; - uint16_t RESERVED4; - __IO uint16_t SR1; - uint16_t RESERVED5; - __IO uint16_t SR2; - uint16_t RESERVED6; - __IO uint16_t CCR; - uint16_t RESERVED7; - __IO uint16_t TRISE; - uint16_t RESERVED8; -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; - __IO uint32_t PR; - __IO uint32_t RLR; - __IO uint32_t SR; -} IWDG_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CSR; -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFGR; - __IO uint32_t CIR; - __IO uint32_t APB2RSTR; - __IO uint32_t APB1RSTR; - __IO uint32_t AHBENR; - __IO uint32_t APB2ENR; - __IO uint32_t APB1ENR; - __IO uint32_t BDCR; - __IO uint32_t CSR; -#ifdef STM32F10X_CL - __IO uint32_t AHBRSTR; - __IO uint32_t CFGR2; -#endif /* STM32F10X_CL */ -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint16_t CRH; - uint16_t RESERVED0; - __IO uint16_t CRL; - uint16_t RESERVED1; - __IO uint16_t PRLH; - uint16_t RESERVED2; - __IO uint16_t PRLL; - uint16_t RESERVED3; - __IO uint16_t DIVH; - uint16_t RESERVED4; - __IO uint16_t DIVL; - uint16_t RESERVED5; - __IO uint16_t CNTH; - uint16_t RESERVED6; - __IO uint16_t CNTL; - uint16_t RESERVED7; - __IO uint16_t ALRH; - uint16_t RESERVED8; - __IO uint16_t ALRL; - uint16_t RESERVED9; -} RTC_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; - __IO uint32_t CLKCR; - __IO uint32_t ARG; - __IO uint32_t CMD; - __I uint32_t RESPCMD; - __I uint32_t RESP1; - __I uint32_t RESP2; - __I uint32_t RESP3; - __I uint32_t RESP4; - __IO uint32_t DTIMER; - __IO uint32_t DLEN; - __IO uint32_t DCTRL; - __I uint32_t DCOUNT; - __I uint32_t STA; - __IO uint32_t ICR; - __IO uint32_t MASK; - uint32_t RESERVED0[2]; - __I uint32_t FIFOCNT; - uint32_t RESERVED1[13]; - __IO uint32_t FIFO; -} SDIO_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t SR; - uint16_t RESERVED2; - __IO uint16_t DR; - uint16_t RESERVED3; - __IO uint16_t CRCPR; - uint16_t RESERVED4; - __IO uint16_t RXCRCR; - uint16_t RESERVED5; - __IO uint16_t TXCRCR; - uint16_t RESERVED6; - __IO uint16_t I2SCFGR; - uint16_t RESERVED7; - __IO uint16_t I2SPR; - uint16_t RESERVED8; -} SPI_TypeDef; - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t SMCR; - uint16_t RESERVED2; - __IO uint16_t DIER; - uint16_t RESERVED3; - __IO uint16_t SR; - uint16_t RESERVED4; - __IO uint16_t EGR; - uint16_t RESERVED5; - __IO uint16_t CCMR1; - uint16_t RESERVED6; - __IO uint16_t CCMR2; - uint16_t RESERVED7; - __IO uint16_t CCER; - uint16_t RESERVED8; - __IO uint16_t CNT; - uint16_t RESERVED9; - __IO uint16_t PSC; - uint16_t RESERVED10; - __IO uint16_t ARR; - uint16_t RESERVED11; - __IO uint16_t RCR; - uint16_t RESERVED12; - __IO uint16_t CCR1; - uint16_t RESERVED13; - __IO uint16_t CCR2; - uint16_t RESERVED14; - __IO uint16_t CCR3; - uint16_t RESERVED15; - __IO uint16_t CCR4; - uint16_t RESERVED16; - __IO uint16_t BDTR; - uint16_t RESERVED17; - __IO uint16_t DCR; - uint16_t RESERVED18; - __IO uint16_t DMAR; - uint16_t RESERVED19; -} TIM_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint16_t SR; - uint16_t RESERVED0; - __IO uint16_t DR; - uint16_t RESERVED1; - __IO uint16_t BRR; - uint16_t RESERVED2; - __IO uint16_t CR1; - uint16_t RESERVED3; - __IO uint16_t CR2; - uint16_t RESERVED4; - __IO uint16_t CR3; - uint16_t RESERVED5; - __IO uint16_t GTPR; - uint16_t RESERVED6; -} USART_TypeDef; - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFR; - __IO uint32_t SR; -} WWDG_TypeDef; - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ - -#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the alias region */ -#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the alias region */ - -#define SRAM_BASE ((uint32_t)0x20000000) /*!< Peripheral base address in the bit-band region */ -#define PERIPH_BASE ((uint32_t)0x40000000) /*!< SRAM base address in the bit-band region */ - -#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) - -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) -#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400) - -#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) -#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) -#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800) -#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) - -#define SDIO_BASE (PERIPH_BASE + 0x18000) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) -#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) -#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) -#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) -#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) -#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) -#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) -#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) -#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) -#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) -#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) -#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) -#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) -#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -#define CRC_BASE (AHBPERIPH_BASE + 0x3000) - -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ -#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ - -#define ETH_BASE (AHBPERIPH_BASE + 0x8000) -#define ETH_MAC_BASE (ETH_BASE) -#define ETH_MMC_BASE (ETH_BASE + 0x0100) -#define ETH_PTP_BASE (ETH_BASE + 0x0700) -#define ETH_DMA_BASE (ETH_BASE + 0x1000) - -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ -#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ -#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ - -#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ - -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define BKP ((BKP_TypeDef *) BKP_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC ((DAC_TypeDef *) DAC_BASE) -#define AFIO ((AFIO_TypeDef *) AFIO_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) -#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) -#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) -#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) -#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define OB ((OB_TypeDef *) OB_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) -#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) -#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) -#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) -#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) -#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* CRC calculation unit */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for CRC_DR register *********************/ -#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ - - -/******************* Bit definition for CRC_IDR register ********************/ -#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ - - -/******************** Bit definition for CRC_CR register ********************/ -#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ - -/******************************************************************************/ -/* */ -/* Power Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for PWR_CR register ********************/ -#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ -#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ -#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ -#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ -#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ - -#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ -#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ -#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ -#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ - -/*!< PVD level configuration */ -#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ -#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ -#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ -#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ -#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ -#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ -#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ -#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ - -#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ - - -/******************* Bit definition for PWR_CSR register ********************/ -#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ -#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ -#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ -#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ - -/******************************************************************************/ -/* */ -/* Backup registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for BKP_DR1 register ********************/ -#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR2 register ********************/ -#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR3 register ********************/ -#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR4 register ********************/ -#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR5 register ********************/ -#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR6 register ********************/ -#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR7 register ********************/ -#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR8 register ********************/ -#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR9 register ********************/ -#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR10 register *******************/ -#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR11 register *******************/ -#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR12 register *******************/ -#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR13 register *******************/ -#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR14 register *******************/ -#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR15 register *******************/ -#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR16 register *******************/ -#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR17 register *******************/ -#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/****************** Bit definition for BKP_DR18 register ********************/ -#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR19 register *******************/ -#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR20 register *******************/ -#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR21 register *******************/ -#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR22 register *******************/ -#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR23 register *******************/ -#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR24 register *******************/ -#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR25 register *******************/ -#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR26 register *******************/ -#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR27 register *******************/ -#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR28 register *******************/ -#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR29 register *******************/ -#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR30 register *******************/ -#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR31 register *******************/ -#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR32 register *******************/ -#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR33 register *******************/ -#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR34 register *******************/ -#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR35 register *******************/ -#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR36 register *******************/ -#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR37 register *******************/ -#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR38 register *******************/ -#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR39 register *******************/ -#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR40 register *******************/ -#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR41 register *******************/ -#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR42 register *******************/ -#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/****************** Bit definition for BKP_RTCCR register *******************/ -#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ -#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ -#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ -#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ - -/******************** Bit definition for BKP_CR register ********************/ -#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ -#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ - -/******************* Bit definition for BKP_CSR register ********************/ -#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ -#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ -#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ -#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ -#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ - -/******************************************************************************/ -/* */ -/* Reset and Clock Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for RCC_CR register ********************/ -#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ -#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ -#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ -#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ -#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ -#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ -#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ -#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ -#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ -#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ - -#ifdef STM32F10X_CL - #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ - #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ - #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ - #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ -#endif /* STM32F10X_CL */ - -/******************* Bit definition for RCC_CFGR register *******************/ -/*!< SW configuration */ -#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ -#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ -#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ -#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ - -/*!< SWS configuration */ -#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ -#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ -#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ - -/*!< HPRE configuration */ -#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ -#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ -#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ -#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ -#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ -#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ -#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ -#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ -#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ -#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ - -/*!< PPRE1 configuration */ -#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ -#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ - -/*!< PPRE2 configuration */ -#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ -#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ -#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ -#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ - -#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ - -/*!< ADCPPRE configuration */ -#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ -#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ -#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ -#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ -#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ - -#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ - -#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ - -/*!< PLLMUL configuration */ -#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ -#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ -#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ -#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ - -#ifdef STM32F10X_CL - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ - #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ - - #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ - #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ - #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ - #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ -#else - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ - #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ - #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ - #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ - #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ - #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ - #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ - #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ - #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ - #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ -#endif /* STM32F10X_CL */ - -/*!<****************** Bit definition for RCC_CIR register ********************/ -#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ -#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ -#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ -#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ -#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ -#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ -#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ -#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ -#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ -#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ -#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ -#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ -#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ -#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ -#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ -#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ -#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ - -#ifdef STM32F10X_CL - #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ - #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ - #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ - #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ - #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ - #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ -#endif /* STM32F10X_CL */ - -/***************** Bit definition for RCC_APB2RSTR register *****************/ -#define RCC_APB2RSTR_AFIORST ((uint16_t)0x0001) /*!< Alternate Function I/O reset */ -#define RCC_APB2RSTR_IOPARST ((uint16_t)0x0004) /*!< I/O port A reset */ -#define RCC_APB2RSTR_IOPBRST ((uint16_t)0x0008) /*!< I/O port B reset */ -#define RCC_APB2RSTR_IOPCRST ((uint16_t)0x0010) /*!< I/O port C reset */ -#define RCC_APB2RSTR_IOPDRST ((uint16_t)0x0020) /*!< I/O port D reset */ -#define RCC_APB2RSTR_ADC1RST ((uint16_t)0x0200) /*!< ADC 1 interface reset */ -#define RCC_APB2RSTR_ADC2RST ((uint16_t)0x0400) /*!< ADC 2 interface reset */ -#define RCC_APB2RSTR_TIM1RST ((uint16_t)0x0800) /*!< TIM1 Timer reset */ -#define RCC_APB2RSTR_SPI1RST ((uint16_t)0x1000) /*!< SPI 1 reset */ -#define RCC_APB2RSTR_USART1RST ((uint16_t)0x4000) /*!< USART1 reset */ - -#ifndef STM32F10X_LD - #define RCC_APB2RSTR_IOPERST ((uint16_t)0x0040) /*!< I/O port E reset */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_HD - #define RCC_APB2RSTR_IOPFRST ((uint16_t)0x0080) /*!< I/O port F reset */ - #define RCC_APB2RSTR_IOPGRST ((uint16_t)0x0100) /*!< I/O port G reset */ - #define RCC_APB2RSTR_TIM8RST ((uint16_t)0x2000) /*!< TIM8 Timer reset */ - #define RCC_APB2RSTR_ADC3RST ((uint16_t)0x8000) /*!< ADC3 interface reset */ -#endif /* STM32F10X_HD */ - -/***************** Bit definition for RCC_APB1RSTR register *****************/ -#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ -#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ -#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ -#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ -#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ -#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ -#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ -#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ - -#ifndef STM32F10X_LD - #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ - #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ - #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< RUSART 3 reset */ - #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ -#endif /* STM32F10X_HD */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) - #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ - #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ - #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ - #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ - #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ - #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ - #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ -#endif - -#ifdef STM32F10X_CL - #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x08000000) /*!< CAN2 reset */ -#endif /* STM32F10X_CL */ - -/****************** Bit definition for RCC_AHBENR register ******************/ -#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ -#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ -#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ -#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ -#endif - -#ifdef STM32F10X_HD - #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ - #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_CL - #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ - #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ - #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ - #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ -#endif /* STM32F10X_CL */ - -/****************** Bit definition for RCC_APB2ENR register *****************/ -#define RCC_APB2ENR_AFIOEN ((uint16_t)0x0001) /*!< Alternate Function I/O clock enable */ -#define RCC_APB2ENR_IOPAEN ((uint16_t)0x0004) /*!< I/O port A clock enable */ -#define RCC_APB2ENR_IOPBEN ((uint16_t)0x0008) /*!< I/O port B clock enable */ -#define RCC_APB2ENR_IOPCEN ((uint16_t)0x0010) /*!< I/O port C clock enable */ -#define RCC_APB2ENR_IOPDEN ((uint16_t)0x0020) /*!< I/O port D clock enable */ -#define RCC_APB2ENR_ADC1EN ((uint16_t)0x0200) /*!< ADC 1 interface clock enable */ -#define RCC_APB2ENR_ADC2EN ((uint16_t)0x0400) /*!< ADC 2 interface clock enable */ -#define RCC_APB2ENR_TIM1EN ((uint16_t)0x0800) /*!< TIM1 Timer clock enable */ -#define RCC_APB2ENR_SPI1EN ((uint16_t)0x1000) /*!< SPI 1 clock enable */ -#define RCC_APB2ENR_USART1EN ((uint16_t)0x4000) /*!< USART1 clock enable */ - -#ifndef STM32F10X_LD - #define RCC_APB2ENR_IOPEEN ((uint16_t)0x0040) /*!< I/O port E clock enable */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_HD - #define RCC_APB2ENR_IOPFEN ((uint16_t)0x0080) /*!< I/O port F clock enable */ - #define RCC_APB2ENR_IOPGEN ((uint16_t)0x0100) /*!< I/O port G clock enable */ - #define RCC_APB2ENR_TIM8EN ((uint16_t)0x2000) /*!< TIM8 Timer clock enable */ - #define RCC_APB2ENR_ADC3EN ((uint16_t)0x8000) /*!< DMA1 clock enable */ -#endif /* STM32F10X_HD */ - -/***************** Bit definition for RCC_APB1ENR register ******************/ -#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ -#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ -#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ -#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ -#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ -#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ -#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ -#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ - -#ifndef STM32F10X_LD - #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ - #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ - #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ - #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ -#endif /* STM32F10X_HD */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) - #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ - #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ - #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ - #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ - #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ - #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ - #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ -#endif - -#ifdef STM32F10X_CL - #define RCC_APB1ENR_CAN2EN ((uint32_t)0x08000000) /*!< CAN2 clock enable */ -#endif /* STM32F10X_CL */ - -/******************* Bit definition for RCC_BDCR register *******************/ -#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ -#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ -#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ - -#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ -#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -/*!< RTC congiguration */ -#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ -#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ - -#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ -#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ - -/******************* Bit definition for RCC_CSR register ********************/ -#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ -#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ -#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ -#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ -#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ -#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ -#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ -#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ -#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ - -#ifdef STM32F10X_CL -/******************* Bit definition for RCC_AHBRSTR register ****************/ - #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ - #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ - -/******************* Bit definition for RCC_CFGR2 register ******************/ -/*!< PREDIV1 configuration */ - #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ - #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ - #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ - -/*!< PREDIV2 configuration */ - #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ - #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ - #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ - -/*!< PLL2MUL configuration */ - #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ - #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ - #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - - #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ - #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ - #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ - #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ - #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ - #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ - #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ - #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ - #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ - -/*!< PLL3MUL configuration */ - #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ - #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ - #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ - #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ - - #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ - #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ - #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ - #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ - #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ - #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ - #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ - #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ - #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ - - #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ - #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ - #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ - #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ - #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ -#endif /* STM32F10X_CL */ - -/******************************************************************************/ -/* */ -/* General Purpose and Alternate Function I/O */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for GPIO_CRL register *******************/ -#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ - -#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ -#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ -#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ -#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ -#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ -#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ -#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ -#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ -#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ - -#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ -#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ -#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ -#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ -#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ -#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ -#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ -#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ -#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ -#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ - -/******************* Bit definition for GPIO_CRH register *******************/ -#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ - -#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ -#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ -#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ -#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ -#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ -#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ -#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ -#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ -#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ - -#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ -#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ -#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ -#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ -#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ -#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ -#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ -#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ -#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ -#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ - -/*!<****************** Bit definition for GPIO_IDR register *******************/ -#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ -#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ -#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ -#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ -#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ -#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ -#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ -#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ -#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ -#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ -#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ -#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ -#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ -#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ -#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ -#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ - -/******************* Bit definition for GPIO_ODR register *******************/ -#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ -#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ -#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ -#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ -#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ -#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ -#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ -#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ -#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ -#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ -#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ -#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ -#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ -#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ -#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ -#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ - -/****************** Bit definition for GPIO_BSRR register *******************/ -#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ -#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ -#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ -#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ -#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ -#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ -#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ -#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ -#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ -#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ -#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ -#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ -#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ -#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ -#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ -#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ - -#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ -#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ -#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ -#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ -#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ -#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ -#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ -#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ -#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ -#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ -#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ -#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ -#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ -#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ -#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ -#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ - -/******************* Bit definition for GPIO_BRR register *******************/ -#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ -#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ -#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ -#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ -#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ -#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ -#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ -#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ -#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ -#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ -#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ -#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ -#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ -#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ -#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ -#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ - -/****************** Bit definition for GPIO_LCKR register *******************/ -#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ -#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ -#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ -#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ -#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ -#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ -#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ -#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ -#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ -#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ -#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ -#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ -#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ -#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ -#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ -#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ -#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ - -/*----------------------------------------------------------------------------*/ - -/****************** Bit definition for AFIO_EVCR register *******************/ -#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ -#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ - -/*!< PIN configuration */ -#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ -#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ -#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ -#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ -#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ -#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ -#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ -#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ -#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ -#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ -#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ -#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ -#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ -#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ -#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ -#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ - -#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ -#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ -#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ -#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ - -/*!< PORT configuration */ -#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ -#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ -#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ -#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ -#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ - -#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ - -/****************** Bit definition for AFIO_MAPR register *******************/ -#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ -#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ -#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ -#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ - -#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ -#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -/* USART3_REMAP configuration */ -#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ - -#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ -#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -/*!< TIM1_REMAP configuration */ -#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ - -#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ -#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -/*!< TIM2_REMAP configuration */ -#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ - -#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ -#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -/*!< TIM3_REMAP configuration */ -#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ - -#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ - -#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ -#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ - -/*!< CAN_REMAP configuration */ -#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ -#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ -#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ - -#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ -#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ -#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ - -/*!< SWJ_CFG configuration */ -#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ -#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - -#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ -#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ -#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ - -#ifdef STM32F10X_CL -/*!< ETH_REMAP configuration */ - #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ - -/*!< CAN2_REMAP configuration */ - #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ - -/*!< MII_RMII_SEL configuration */ - #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ - -/*!< SPI3_REMAP configuration */ - #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ - -/*!< TIM2ITR1_IREMAP configuration */ - #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ - -/*!< PTP_PPS_REMAP configuration */ - #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x20000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ -#endif - -/***************** Bit definition for AFIO_EXTICR1 register *****************/ -#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ -#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ -#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ -#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ - -/*!< EXTI0 configuration */ -#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ -#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ -#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ -#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ -#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ -#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ -#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ - -/*!< EXTI1 configuration */ -#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ -#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ -#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ -#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ -#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ -#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ -#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ - -/*!< EXTI2 configuration */ -#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ -#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ -#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ -#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ -#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ -#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ -#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ - -/*!< EXTI3 configuration */ -#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ -#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ -#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ -#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ -#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ -#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ -#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ - -/***************** Bit definition for AFIO_EXTICR2 register *****************/ -#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ -#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ -#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ -#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ - -/*!< EXTI4 configuration */ -#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ -#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ -#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ -#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ -#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ -#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ -#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ - -/* EXTI5 configuration */ -#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ -#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ -#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ -#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ -#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ -#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ -#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ - -/*!< EXTI6 configuration */ -#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ -#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ -#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ -#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ -#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ -#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ -#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ - -/*!< EXTI7 configuration */ -#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ -#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ -#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ -#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ -#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ -#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ -#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ - -/***************** Bit definition for AFIO_EXTICR3 register *****************/ -#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ -#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ -#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ -#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ - -/*!< EXTI8 configuration */ -#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ -#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ -#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ -#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ -#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ -#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ -#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ - -/*!< EXTI9 configuration */ -#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ -#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ -#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ -#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ -#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ -#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ -#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ - -/*!< EXTI10 configuration */ -#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ -#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ -#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ -#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ -#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ -#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ -#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ - -/*!< EXTI11 configuration */ -#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ -#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ -#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ -#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ -#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ -#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ -#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ - -/***************** Bit definition for AFIO_EXTICR4 register *****************/ -#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ -#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ -#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ -#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ - -/* EXTI12 configuration */ -#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ -#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ -#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ -#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ -#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ -#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ -#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ - -/* EXTI13 configuration */ -#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ -#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ -#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ -#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ -#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ -#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ -#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ - -/*!< EXTI14 configuration */ -#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ -#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ -#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ -#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ -#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ -#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ -#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ - -/*!< EXTI15 configuration */ -#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ -#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ -#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ -#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ -#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ -#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ -#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ - -/******************************************************************************/ -/* */ -/* SystemTick */ -/* */ -/******************************************************************************/ - -/***************** Bit definition for SysTick_CTRL register *****************/ -#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ -#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ -#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ -#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ - -/***************** Bit definition for SysTick_LOAD register *****************/ -#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ - -/***************** Bit definition for SysTick_VAL register ******************/ -#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ - -/***************** Bit definition for SysTick_CALIB register ****************/ -#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ -#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ -#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ - -/******************************************************************************/ -/* */ -/* Nested Vectored Interrupt Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for NVIC_ISER register *******************/ -#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ -#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ICER register *******************/ -#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ -#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ISPR register *******************/ -#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ -#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ICPR register *******************/ -#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ -#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_IABR register *******************/ -#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ -#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_PRI0 register *******************/ -#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ -#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ -#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ -#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ - -/****************** Bit definition for NVIC_PRI1 register *******************/ -#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ -#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ -#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ -#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ - -/****************** Bit definition for NVIC_PRI2 register *******************/ -#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ -#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ -#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ -#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ - -/****************** Bit definition for NVIC_PRI3 register *******************/ -#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ -#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ -#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ -#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ - -/****************** Bit definition for NVIC_PRI4 register *******************/ -#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ -#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ -#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ -#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ - -/****************** Bit definition for NVIC_PRI5 register *******************/ -#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ -#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ -#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ -#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ - -/****************** Bit definition for NVIC_PRI6 register *******************/ -#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ -#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ -#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ -#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ - -/****************** Bit definition for NVIC_PRI7 register *******************/ -#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ -#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ -#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ -#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ - -/****************** Bit definition for SCB_CPUID register *******************/ -#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ -#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ -#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ -#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ -#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ - -/******************* Bit definition for SCB_ICSR register *******************/ -#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ -#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ -#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ -#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ -#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ -#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ -#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ -#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ -#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ -#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ - -/******************* Bit definition for SCB_VTOR register *******************/ -#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ -#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ - -/*!<***************** Bit definition for SCB_AIRCR register *******************/ -#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ -#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ -#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ - -#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ -#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -/* prority group configuration */ -#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ -#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ - -#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ -#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ - -/******************* Bit definition for SCB_SCR register ********************/ -#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ -#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ -#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ - -/******************** Bit definition for SCB_CCR register *******************/ -#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ -#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ -#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ -#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ -#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ -#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ - -/******************* Bit definition for SCB_SHPR register ********************/ -#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ -#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ -#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ -#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ - -/****************** Bit definition for SCB_SHCSR register *******************/ -#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ -#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ -#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ -#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ -#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ -#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ -#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ -#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ -#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ -#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ -#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ -#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ -#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ -#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ - -/******************* Bit definition for SCB_CFSR register *******************/ -/*!< MFSR */ -#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ -#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ -#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ -#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ -#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ -/*!< BFSR */ -#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ -#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ -#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ -#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ -#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ -#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ -/*!< UFSR */ -#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to excecute an undefined instruction */ -#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ -#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ -#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ -#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ -#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ - -/******************* Bit definition for SCB_HFSR register *******************/ -#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occures because of vector table read on exception processing */ -#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ -#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ - -/******************* Bit definition for SCB_DFSR register *******************/ -#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ -#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ -#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ -#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ -#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ - -/******************* Bit definition for SCB_MMFAR register ******************/ -#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ - -/******************* Bit definition for SCB_BFAR register *******************/ -#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ - -/******************* Bit definition for SCB_afsr register *******************/ -#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ - -/******************************************************************************/ -/* */ -/* External Interrupt/Event Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for EXTI_IMR register *******************/ -#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ -#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ -#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ -#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ -#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ -#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ -#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ -#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ -#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ -#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ -#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ -#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ -#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ -#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ -#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ -#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ -#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ -#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ -#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ -#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ - -/******************* Bit definition for EXTI_EMR register *******************/ -#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ -#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ -#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ -#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ -#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ -#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ -#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ -#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ -#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ -#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ -#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ -#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ -#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ -#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ -#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ -#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ -#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ -#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ -#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ -#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ - -/****************** Bit definition for EXTI_RTSR register *******************/ -#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ -#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ -#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ -#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ -#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ -#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ -#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ -#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ -#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ -#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ -#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ -#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ -#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ -#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ -#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ -#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ -#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ -#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ -#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ -#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ - -/****************** Bit definition for EXTI_FTSR register *******************/ -#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ -#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ -#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ -#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ -#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ -#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ -#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ -#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ -#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ -#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ -#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ -#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ -#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ -#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ -#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ -#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ -#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ -#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ -#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ -#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ - -/****************** Bit definition for EXTI_SWIER register ******************/ -#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ -#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ -#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ -#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ -#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ -#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ -#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ -#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ -#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ -#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ -#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ -#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ -#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ -#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ -#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ -#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ -#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ -#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ -#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ -#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ - -/******************* Bit definition for EXTI_PR register ********************/ -#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ -#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ -#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ -#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ -#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ -#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ -#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ -#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ -#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ -#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ -#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ -#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ -#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ -#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ -#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ -#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ -#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ -#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ -#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ -#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ - -/******************************************************************************/ -/* */ -/* DMA Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for DMA_ISR register ********************/ -#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ -#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ -#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ -#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ -#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ -#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ -#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ -#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ -#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ -#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ -#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ -#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ -#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ -#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ -#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ -#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ -#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ -#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ -#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ -#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ -#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ -#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ -#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ -#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ -#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ -#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ -#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ -#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ - -/******************* Bit definition for DMA_IFCR register *******************/ -#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clearr */ -#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ -#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ -#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ -#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ -#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ -#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ -#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ -#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ -#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ -#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ -#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ -#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ -#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ -#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ -#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ -#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ -#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ -#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ -#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ -#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ -#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ -#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ -#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ -#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ -#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ -#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ -#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ - -/******************* Bit definition for DMA_CCR1 register *******************/ -#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ -#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ -#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR2 register *******************/ -#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< ransfer complete interrupt enable */ -#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR3 register *******************/ -#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/*!<****************** Bit definition for DMA_CCR4 register *******************/ -#define DMA_CCR4_EN ((uint16_t)0x0001) /*!
© COPYRIGHT 2009 STMicroelectronics
- ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** @addtogroup STM32F10x_System_Private_Includes - * @{ - */ - -#include "stm32f10x.h" - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Defines - * @{ - */ - -/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) - frequency (after reset the HSI is used as SYSCLK source) - - IMPORTANT NOTE: - ============== - 1. After each device reset the HSI is used as System clock source. - - 2. Please make sure that the selected System clock doesn't exceed your device's - maximum frequency. - - 3. If none of the define below is enabled, the HSI is used as System clock - source. - - 4. The System clock configuration functions provided within this file assume that: - - For Low, Medium and High density devices an external 8MHz crystal is - used to drive the System clock. - - For Connectivity line devices an external 25MHz crystal is used to drive - the System clock. - If you are using different crystal you have to adapt those functions accordingly. - */ - -/* #define SYSCLK_FREQ_HSE HSE_Value */ -/* #define SYSCLK_FREQ_24MHz 24000000 */ -/* #define SYSCLK_FREQ_36MHz 36000000 */ -/* #define SYSCLK_FREQ_48MHz 48000000 */ -/* #define SYSCLK_FREQ_56MHz 56000000 */ -#define SYSCLK_FREQ_72MHz 72000000 - -/*!< Uncomment the following line if you need to use external SRAM mounted - on STM3210E-EVAL board (STM32 High density devices) as data memory */ -#ifdef STM32F10X_HD -/* #define DATA_IN_ExtSRAM */ -#endif /* STM32F10X_HD */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Variables - * @{ - */ - -/******************************************************************************* -* Clock Definitions -*******************************************************************************/ -#ifdef SYSCLK_FREQ_HSE - const uint32_t SystemFrequency = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = SYSCLK_FREQ_HSE; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = SYSCLK_FREQ_HSE; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = SYSCLK_FREQ_HSE; /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = SYSCLK_FREQ_HSE; /*!< APB Peripheral bus 2 (high) speed */ -#elif defined SYSCLK_FREQ_24MHz - const uint32_t SystemFrequency = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = SYSCLK_FREQ_24MHz; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = SYSCLK_FREQ_24MHz; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = SYSCLK_FREQ_24MHz; /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = SYSCLK_FREQ_24MHz; /*!< APB Peripheral bus 2 (high) speed */ -#elif defined SYSCLK_FREQ_36MHz - const uint32_t SystemFrequency = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = SYSCLK_FREQ_36MHz; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = SYSCLK_FREQ_36MHz; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = SYSCLK_FREQ_36MHz; /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = SYSCLK_FREQ_36MHz; /*!< APB Peripheral bus 2 (high) speed */ -#elif defined SYSCLK_FREQ_48MHz - const uint32_t SystemFrequency = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = SYSCLK_FREQ_48MHz; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = SYSCLK_FREQ_48MHz; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = (SYSCLK_FREQ_48MHz/2); /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = SYSCLK_FREQ_48MHz; /*!< APB Peripheral bus 2 (high) speed */ -#elif defined SYSCLK_FREQ_56MHz - const uint32_t SystemFrequency = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = SYSCLK_FREQ_56MHz; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = SYSCLK_FREQ_56MHz; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = (SYSCLK_FREQ_56MHz/2); /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = SYSCLK_FREQ_56MHz; /*!< APB Peripheral bus 2 (high) speed */ -#elif defined SYSCLK_FREQ_72MHz - const uint32_t SystemFrequency = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = SYSCLK_FREQ_72MHz; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = SYSCLK_FREQ_72MHz; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = (SYSCLK_FREQ_72MHz/2); /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = SYSCLK_FREQ_72MHz; /*!< APB Peripheral bus 2 (high) speed */ -#else /*!< HSI Selected as System Clock source */ - const uint32_t SystemFrequency = HSI_Value; /*!< System Clock Frequency (Core Clock) */ - const uint32_t SystemFrequency_SysClk = HSI_Value; /*!< System clock */ - const uint32_t SystemFrequency_AHBClk = HSI_Value; /*!< AHB System bus speed */ - const uint32_t SystemFrequency_APB1Clk = HSI_Value; /*!< APB Peripheral bus 1 (low) speed */ - const uint32_t SystemFrequency_APB2Clk = HSI_Value; /*!< APB Peripheral bus 2 (high) speed */ -#endif - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_FunctionPrototypes - * @{ - */ - -static void SetSysClock(void); - -#ifdef SYSCLK_FREQ_HSE - static void SetSysClockToHSE(void); -#elif defined SYSCLK_FREQ_24MHz - static void SetSysClockTo24(void); -#elif defined SYSCLK_FREQ_36MHz - static void SetSysClockTo36(void); -#elif defined SYSCLK_FREQ_48MHz - static void SetSysClockTo48(void); -#elif defined SYSCLK_FREQ_56MHz - static void SetSysClockTo56(void); -#elif defined SYSCLK_FREQ_72MHz - static void SetSysClockTo72(void); -#endif - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Private_Functions - * @{ - */ - -/** - * @brief Setup the microcontroller system - * Initialize the Embedded Flash Interface, the PLL and update the SystemFrequency variable. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -void SystemInit (void) -{ - /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifndef STM32F10X_CL - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#else - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#endif /* STM32F10X_CL */ - - /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ - /* Configure the Flash Latency cycles and enable prefetch buffer */ - SetSysClock(); - -} - -/** - * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. - * @param None - * @retval None - */ -static void SetSysClock(void) -{ -#ifdef SYSCLK_FREQ_HSE - SetSysClockToHSE(); -#elif defined SYSCLK_FREQ_24MHz - SetSysClockTo24(); -#elif defined SYSCLK_FREQ_36MHz - SetSysClockTo36(); -#elif defined SYSCLK_FREQ_48MHz - SetSysClockTo48(); -#elif defined SYSCLK_FREQ_56MHz - SetSysClockTo56(); -#elif defined SYSCLK_FREQ_72MHz - SetSysClockTo72(); -#endif - - /* If none of the define above is enabled, the HSI is used as System clock - source (default after reset) */ -} - -/** - * @brief Setup the external memory controller. Called in startup_stm32f10x.s - * before jump to __main - * @param None - * @retval None - */ -#ifdef DATA_IN_ExtSRAM -/** - * @brief Setup the external memory controller. - * Called in startup_stm32f10x_xx.s/.c before jump to main. - * This function configures the external SRAM mounted on STM3210E-EVAL - * board (STM32 High density devices). This SRAM will be used as program - * data memory (including heap and stack). - * @param None - * @retval None - */ -void SystemInit_ExtMemCtl(void) -{ -/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is - required, then adjust the Register Addresses */ - - /* Enable FSMC clock */ - RCC->AHBENR = 0x00000114; - - /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ - RCC->APB2ENR = 0x000001E0; - -/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ -/*---------------- SRAM Address lines configuration -------------------------*/ -/*---------------- NOE and NWE configuration --------------------------------*/ -/*---------------- NE3 configuration ----------------------------------------*/ -/*---------------- NBL0, NBL1 configuration ---------------------------------*/ - - GPIOD->CRL = 0x44BB44BB; - GPIOD->CRH = 0xBBBBBBBB; - - GPIOE->CRL = 0xB44444BB; - GPIOE->CRH = 0xBBBBBBBB; - - GPIOF->CRL = 0x44BBBBBB; - GPIOF->CRH = 0xBBBB4444; - - GPIOG->CRL = 0x44BBBBBB; - GPIOG->CRH = 0x44444B44; - -/*---------------- FSMC Configuration ---------------------------------------*/ -/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ - - FSMC_Bank1->BTCR[4] = 0x00001011; - FSMC_Bank1->BTCR[5] = 0x00000200; -} -#endif /* DATA_IN_ExtSRAM */ - -#ifdef SYSCLK_FREQ_HSE -/** - * @brief Selects HSE as System clock source and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockToHSE(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSEStartUp_TimeOut)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - -#ifndef STM32F10X_CL - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; -#else - if (HSE_Value <= 24000000) - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; - } - else - { - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - } -#endif /* STM32F10X_CL */ - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - - /* Select HSE as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; - - /* Wait till HSE is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - - /* Go to infinite loop */ - while (1) - { - } - } -} -#elif defined SYSCLK_FREQ_24MHz -/** - * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo24(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSEStartUp_TimeOut)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 0 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); - - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } -#else - /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - - /* Go to infinite loop */ - while (1) - { - } - } -} -#elif defined SYSCLK_FREQ_36MHz -/** - * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo36(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSEStartUp_TimeOut)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); - - /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - -#else - /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - - /* Go to infinite loop */ - while (1) - { - } - } -} -#elif defined SYSCLK_FREQ_48MHz -/** - * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo48(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSEStartUp_TimeOut)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL6); -#else - /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - - /* Go to infinite loop */ - while (1) - { - } - } -} - -#elif defined SYSCLK_FREQ_56MHz -/** - * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo56(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSEStartUp_TimeOut)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 1 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL7); -#else - /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); - -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - - /* Go to infinite loop */ - while (1) - { - } - } -} - -#elif defined SYSCLK_FREQ_72MHz -/** - * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 - * and PCLK1 prescalers. - * @note This function should be used only after reset. - * @param None - * @retval None - */ -static void SetSysClockTo72(void) -{ - __IO uint32_t StartUpCounter = 0, HSEStatus = 0; - - /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ - /* Enable HSE */ - RCC->CR |= ((uint32_t)RCC_CR_HSEON); - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC->CR & RCC_CR_HSERDY; - StartUpCounter++; - } while((HSEStatus == 0) && (StartUpCounter != HSEStartUp_TimeOut)); - - if ((RCC->CR & RCC_CR_HSERDY) != RESET) - { - HSEStatus = (uint32_t)0x01; - } - else - { - HSEStatus = (uint32_t)0x00; - } - - if (HSEStatus == (uint32_t)0x01) - { - /* Enable Prefetch Buffer */ - FLASH->ACR |= FLASH_ACR_PRFTBE; - - /* Flash 2 wait state */ - FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); - FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; - - - /* HCLK = SYSCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; - - /* PCLK2 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; - - /* PCLK1 = HCLK */ - RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; - -#ifdef STM32F10X_CL - /* Configure PLLs ------------------------------------------------------*/ - /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ - /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ - - RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | - RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); - RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | - RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); - - /* Enable PLL2 */ - RCC->CR |= RCC_CR_PLL2ON; - /* Wait till PLL2 is ready */ - while((RCC->CR & RCC_CR_PLL2RDY) == 0) - { - } - - - /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | - RCC_CFGR_PLLMULL9); -#else - /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | - RCC_CFGR_PLLMULL)); - RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); -#endif /* STM32F10X_CL */ - - /* Enable PLL */ - RCC->CR |= RCC_CR_PLLON; - - /* Wait till PLL is ready */ - while((RCC->CR & RCC_CR_PLLRDY) == 0) - { - } - - /* Select PLL as system clock source */ - RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); - RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; - - /* Wait till PLL is used as system clock source */ - while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) - { - } - } - else - { /* If HSE fails to start-up, the application will have wrong clock - configuration. User can add here some code to deal with this error */ - - /* Go to infinite loop */ - while (1) - { - } - } -} -#endif - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/system_stm32f10x.h b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/system_stm32f10x.h deleted file mode 100644 index 5c14f943e..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/CM3/system_stm32f10x.h +++ /dev/null @@ -1,100 +0,0 @@ -/** - ****************************************************************************** - * @file system_stm32f10x.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File. - ****************************************************************************** - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x_system - * @{ - */ - -/** - * @brief Define to prevent recursive inclusion - */ -#ifndef __SYSTEM_STM32F10X_H -#define __SYSTEM_STM32F10X_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup STM32F10x_System_Includes - * @{ - */ - -/** - * @} - */ - - -/** @addtogroup STM32F10x_System_Exported_types - * @{ - */ - -extern const uint32_t SystemFrequency; /*!< System Clock Frequency (Core Clock) */ -extern const uint32_t SystemFrequency_SysClk; /*!< System clock */ -extern const uint32_t SystemFrequency_AHBClk; /*!< AHB System bus speed */ -extern const uint32_t SystemFrequency_APB1Clk; /*!< APB Peripheral Bus 1 (low) speed */ -extern const uint32_t SystemFrequency_APB2Clk; /*!< APB Peripheral Bus 2 (high) speed */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Exported_Constants - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @addtogroup STM32F10x_System_Exported_Functions - * @{ - */ - -extern void SystemInit(void); -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__SYSTEM_STM32F10X_H */ - -/** - * @} - */ - -/** - * @} - */ -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/Documentation/CMSIS_Core.htm b/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/Documentation/CMSIS_Core.htm deleted file mode 100644 index 60b79b808..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/CMSIS/Core/Documentation/CMSIS_Core.htm +++ /dev/null @@ -1,1231 +0,0 @@ - - - - CMSIS: Cortex Microcontroller Software Interface Standard - - - -

Cortex Microcontroller Software Interface Standard

- -

This file describes the Cortex Microcontroller Software Interface Standard (CMSIS).

-

Version: 1.20 - 22. May 2009

- -

Information in this file, the accompany manuals, and software is
- Copyright © ARM Ltd.
All rights reserved. -

- -
- -

Revision History

-
    -
  • Version 1.00: initial release.
  • -
  • Version 1.01: added __LDREXx, __STREXx, and __CLREX.
  • -
  • Version 1.02: added Cortex-M0.
  • -
  • Version 1.10: second review.
  • -
  • Version 1.20: third review.
  • -
- -
- -

Contents

- -
    -
  1. About
  2. -
  3. Coding Rules and Conventions
  4. -
  5. CMSIS Files
  6. -
  7. Core Peripheral Access Layer
  8. -
  9. CMSIS Example
  10. -
- -

About

- -

- The Cortex Microcontroller Software Interface Standard (CMSIS) answers the challenges - that are faced when software components are deployed to physical microcontroller devices based on a - Cortex-M0 / Cortex-M1 or Cortex-M3 processor. The CMSIS will be also expanded to future Cortex-M - processor cores (the term Cortex-Mx is used to indicate that). The CMSIS is defined in close co-operation - with various silicon and software vendors and provides a common approach to interface to peripherals, - real-time operating systems, and middleware components. -

- -

ARM provides as part of the CMSIS the following software layers that are -available for various compiler implementations:

-
    -
  • Core Peripheral Access Layer: contains name definitions, - address definitions and helper functions to - access core registers and peripherals. It defines also an device - independent interface for RTOS Kernels that includes debug channel - definitions.
  • -
  • Middleware Access Layer: provides common methods to - access peripherals for the software industry. The Middleware Access Layer - is adapted by the Silicon Vendor for the device specific peripherals used - by middleware components. The middleware access layer is currently in - development and not yet part of this documentation
  • -
- -

These software layers are expanded by Silicon partners with:

-
    -
  • Device Peripheral Access Layer: provides definitions - for all device peripherals
  • -
  • Access Functions for Peripherals (optional): provides - additional helper functions for peripherals
  • -
- -

CMSIS defines for a Cortex-Mx Microcontroller System:

-
    -
  • A common way to access peripheral registers - and a common way to define exception vectors.
  • -
  • The register names of the Core - Peripherals and the names of the Core - Exception Vectors.
  • -
  • An device independent interface for RTOS Kernels including a debug - channel.
  • -
  • Interfaces for middleware components (TCP/IP - Stack, Flash File System).
  • -
- -

- By using CMSIS compliant software components, the user can easier re-use template code. - CMSIS is intended to enable the combination of software components from multiple middleware vendors. -

- -

Coding Rules and Conventions

- -

- The following section describes the coding rules and conventions used in the CMSIS - implementation. It contains also information about data types and version number information. -

- -

Essentials

-
    -
  • The CMSIS C code conforms to MISRA 2004 rules. In case of MISRA violations, - there are disable and enable sequences for PC-LINT inserted.
  • -
  • ANSI standard data types defined in the ANSI C header file - <stdint.h> are used.
  • -
  • #define constants that include expressions must be enclosed by - parenthesis.
  • -
  • Variables and parameters have a complete data type.
  • -
  • All functions in the Core Peripheral Access Layer are - re-entrant.
  • -
  • The Core Peripheral Access Layer has no blocking code - (which means that wait/query loops are done at other software layers such as - the Middleware Access Layer).
  • -
  • For each exception/interrupt there is definition for: -
      -
    • an exception/interrupt handler with the postfix _Handler - (for exceptions) or _IRQHandler (for interrupts).
    • -
    • a default exception/interrupt handler (weak definition) that contains an endless loop.
    • -
    • a #define of the interrupt number with the postfix _IRQn.
    • -
  • -
- -

Recommendations

- -

The CMSIS recommends the following conventions for identifiers.

-
    -
  • CAPITAL names to identify Core Registers, Peripheral Registers, and CPU Instructions.
  • -
  • CamelCase names to identify peripherals access functions and interrupts.
  • -
  • PERIPHERAL_ prefix to identify functions that belong to specify peripherals.
  • -
  • Doxygen comments for all functions are included as described under Function Comments below.
  • -
- -Comments - -
    -
  • Comments use the ANSI C90 style (/* comment */) or C++ style - (// comment). It is assumed that the programming tools support today - consistently the C++ comment style.
  • -
  • Function Comments provide for each function the following information: -
      -
    • one-line brief function overview.
    • -
    • detailed parameter explanation.
    • -
    • detailed information about return values.
    • -
    • detailed description of the actual function.
    • -
    -

    Doxygen Example:

    -
    -/** 
    - * @brief  Enable Interrupt in NVIC Interrupt Controller
    - * @param  IRQn  interrupt number that specifies the interrupt
    - * @return none.
    - * Enable the specified interrupt in the NVIC Interrupt Controller.
    - * Other settings of the interrupt such as priority are not affected.
    - */
    -
  • -
- -

Data Types and IO Type Qualifiers

- -

- The Cortex-Mx HAL uses the standard types from the standard ANSI C header file - <stdint.h>. IO Type Qualifiers are used to specify the access - to peripheral variables. IO Type Qualifiers are indented to be used for automatic generation of - debug information of peripheral registers. -

- - - - - - - - - - - - - - - - - - - - - - - - -
IO Type Qualifier#defineDescription
__Ivolatile constRead access only
__OvolatileWrite access only
__IOvolatileRead and write access
- -

CMSIS Version Number

-

- File core_cm3.h contains the version number of the CMSIS with the following define: -

- -
-#define __CM3_CMSIS_VERSION_MAIN  (0x00)      /* [31:16] main version       */
-#define __CM3_CMSIS_VERSION_SUB   (0x03)      /* [15:0]  sub version        */
-#define __CM3_CMSIS_VERSION       ((__CM3_CMSIS_VERSION_MAIN << 16) | __CM3_CMSIS_VERSION_SUB)
- -

- File core_cm0.h contains the version number of the CMSIS with the following define: -

- -
-#define __CM0_CMSIS_VERSION_MAIN  (0x00)      /* [31:16] main version       */
-#define __CM0_CMSIS_VERSION_SUB   (0x00)      /* [15:0]  sub version        */
-#define __CM0_CMSIS_VERSION       ((__CM0_CMSIS_VERSION_MAIN << 16) | __CM0_CMSIS_VERSION_SUB)
- - -

CMSIS Cortex Core

-

- File core_cm3.h contains the type of the CMSIS Cortex-Mx with the following define: -

- -
-#define __CORTEX_M                (0x03)
- -

- File core_cm0.h contains the type of the CMSIS Cortex-Mx with the following define: -

- -
-#define __CORTEX_M                (0x00)
- - -

CMSIS Files

-

- This section describes the Files provided in context with the CMSIS to access the Cortex-Mx - hardware and peripherals. -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FileProviderDescription
device.hDevice specific (provided by silicon partner)Defines the peripherals for the actual device. The file may use - several other include files to define the peripherals of the actual device.
core_cm0.hARM (for RealView ARMCC, IAR, and GNU GCC)Defines the core peripherals for the Cortex-M0 CPU and core peripherals.
core_cm3.hARM (for RealView ARMCC, IAR, and GNU GCC)Defines the core peripherals for the Cortex-M3 CPU and core peripherals.
core_cm0.cARM (for RealView ARMCC, IAR, and GNU GCC)Provides helper functions that access core registers.
core_cm0.cARM (for RealView ARMCC, IAR, and GNU GCC)Provides helper functions that access core registers.
startup_deviceARM (adapted by compiler partner / silicon partner)Provides the Cortex-Mx startup code and the complete (device specific) Interrupt Vector Table
system_deviceARM (adapted by silicon partner)Provides a device specific configuration file for the device. It configures the device initializes - typically the oscillator (PLL) that is part of the microcontroller device
- -

device.h

- -

- The file device.h is provided by the silicon vendor and is the - central include file that the application programmer is using in - the C source code. This file contains: -

-
    -
  • -

    Interrupt Number Definition: provides interrupt numbers - (IRQn) for all core and device specific exceptions and interrupts.

    -
  • -
  • -

    Configuration for core_cm0.h / core_cm3.h: reflects the - actual configuration of the Cortex-Mx processor that is part of the actual - device. As such the file core_cm0.h / core_cm3.h is included that - implements access to processor registers and core peripherals.

    -
  • -
  • -

    Device Peripheral Access Layer: provides definitions - for all device peripherals. It contains all data structures and the address - mapping for the device specific peripherals.

    -
  • -
  • Access Functions for Peripherals (optional): provides - additional helper functions for peripherals that are useful for programming - of these peripherals. Access Functions may be provided as inline functions - or can be extern references to a device specific library provided by the - silicon vendor.
  • -
- - -

Interrupt Number Definition

- -

To access the device specific interrupts the device.h file defines IRQn -numbers for the complete device using a enum typedef as shown below:

-
-typedef enum IRQn
-{
-/******  Cortex-M3 Processor Exceptions/Interrupt Numbers ************************************************/
-  NonMaskableInt_IRQn             = -14,      /*!< 2 Non Maskable Interrupt                              */
-  HardFault_IRQn                  = -13,      /*!< 3 Cortex-M3 Hard Fault Interrupt                      */
-  MemoryManagement_IRQn           = -12,      /*!< 4 Cortex-M3 Memory Management Interrupt               */
-  BusFault_IRQn                   = -11,      /*!< 5 Cortex-M3 Bus Fault Interrupt                       */
-  UsageFault_IRQn                 = -10,      /*!< 6 Cortex-M3 Usage Fault Interrupt                     */
-  SVCall_IRQn                     = -5,       /*!< 11 Cortex-M3 SV Call Interrupt                        */
-  DebugMonitor_IRQn               = -4,       /*!< 12 Cortex-M3 Debug Monitor Interrupt                  */
-  PendSV_IRQn                     = -2,       /*!< 14 Cortex-M3 Pend SV Interrupt                        */
-  SysTick_IRQn                    = -1,       /*!< 15 Cortex-M3 System Tick Interrupt                    */
-/******  STM32 specific Interrupt Numbers ****************************************************************/
-  WWDG_STM_IRQn                   = 0,        /*!< Window WatchDog Interrupt                             */
-  PVD_STM_IRQn                    = 1,        /*!< PVD through EXTI Line detection Interrupt             */
-  :
-  :
-  } IRQn_Type;
- - -

Configuration for core_cm0.h / core_cm3.h

-

- The Cortex-Mx core configuration options which are defined for each device implementation. Some - configuration options are reflected in the CMSIS layer using the #define settings described below. -

-

- To access core peripherals file device.h includes file core_cm0.h / core_cm3.h. - Several features in core_cm0.h / core_cm3.h are configured by the following defines that must be - defined before #include <core_cm0.h> / #include <core_cm3.h> - preprocessor command. -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#defineFileValueDescription
__NVIC_PRIO_BITScore_cm0.h(2)Number of priority bits implemented in the NVIC (device specific)
__NVIC_PRIO_BITScore_cm3.h(2 ... 8)Number of priority bits implemented in the NVIC (device specific)
__MPU_PRESENTcore_cm0.h, core_cm3.h(0, 1)Defines if an MPU is present or not
__Vendor_SysTickConfigcore_cm0.h, core_cm3.h(1)When this define is setup to 1, the SysTickConfig function - in core_cm3.h is excluded. In this case the device.h - file must contain a vendor specific implementation of this function.
- - -

Device Peripheral Access Layer

-

- Each peripheral uses a PERIPHERAL_ prefix to identify peripheral registers - and functions that access this specific peripheral. If more than one peripheral of the same - type exists, identifiers have a postfix (digit or letter). For example: -

-
    -
  • UART_Type: defines the generic register layout for all UART channels in a device.
  • -
  • UART1: is a pointer to a register structure that refers to a specific UART. - For example UART1->DR is the data register of UART1.
  • -
  • UART_SendChar(UART1, c): is a generic function that works with all UART's in the device. - To communicate the UART that it accesses the first parameter is a pointer to the actual - UART register structure.
  • -
  • UART1_SendChar(c): is an UART1 specific implementation (in this case the send function).
  • -
- -
Minimal Requiements
-

- To access the peripheral registers and related function in a device the files device.h - and core_cm0.h / core_cm3.h defines as a minimum: -

-
    -
  • The Register Layout Typedef for each peripheral that defines all register names. - Names that start with RESERVE are used to introduce space into the structure to adjust the addresses of - the peripheral registers. For example: -
    -typedef struct {
    -  __IO uint32_t CTRL;      /* SysTick Control and Status Register */
    -  __IO uint32_t LOAD;      /* SysTick Reload Value Register       */
    -  __IO uint32_t VAL;       /* SysTick Current Value Register      */
    -  __I  uint32_t CALIB;     /* SysTick Calibration Register        */
    -  } SysTick_Type;
    -
  • - -
  • Base Address for each peripheral (in case of multiple peripherals - that use the same register layout typedef multiple base addresses are defined). For example: -
    -#define SysTick_BASE (SCS_BASE + 0x0010)            /* SysTick Base Address */
    -
  • - -
  • Access Definition for each peripheral (in case of multiple peripherals that use - the same register layout typedef multiple access definitions exist, i.e. UART0, - UART1). For Example: -
    -#define SysTick ((SysTick_Type *) SysTick_BASE)     /* SysTick access definition */
    -
  • -
- -

- These definitions allow to access the peripheral registers from user code with simple assignments like: -

-
SysTick->CTRL = 0;
- -
Optional Features
-

In addition the device.h file may define:

-
    -
  • #define constants that simplify access to the peripheral registers. - These constant define bit-positions or other specific patterns are that - required for the programming of the peripheral registers. The identifiers - used start with the name of the PERIPERHAL_. It is - recommended to use CAPITAL letters for such #define constants.
  • -
  • Functions that perform more complex functions with the peripheral (i.e. - status query before a sending register is accessed). Again these function - start with the name of the PERIPHERAL_.
  • -
- -

core_cm0.h and core_cm0.c

-

- File core_cm0.h describes the data structures for the Cortex-M0 core peripherals and does - the address mapping of this structures. It also provides basic access to the Cortex-M0 core registers - and core peripherals with efficient functions (defined as static inline). -

-

- File core_cm0.c defines several helper functions that access processor registers. -

-

Together these files implement the Core Peripheral Access Layer for a Cortex-M0.

- -

core_cm3.h and core_cm3.c

-

- File core_cm3.h describes the data structures for the Cortex-M3 core peripherals and does - the address mapping of this structures. It also provides basic access to the Cortex-M3 core registers - and core peripherals with efficient functions (defined as static inline). -

-

- File core_cm3.c defines several helper functions that access processor registers. -

-

Together these files implement the Core Peripheral Access Layer for a Cortex-M3.

- -

startup_device

-

- A template file for startup_device is provided by ARM for each supported - compiler. It is adapted by the silicon vendor to include interrupt vectors for all device specific - interrupt handlers. Each interrupt handler is defined as weak function - to an dummy handler. Therefore the interrupt handler can be directly used in application software - without any requirements to adapt the startup_device file. -

-

- The following exception names are fixed and define the start of the vector table for a Cortex-M0: -

-
-__Vectors       DCD     __initial_sp              ; Top of Stack
-                DCD     Reset_Handler             ; Reset Handler
-                DCD     NMI_Handler               ; NMI Handler
-                DCD     HardFault_Handler         ; Hard Fault Handler
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     SVC_Handler               ; SVCall Handler
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     PendSV_Handler            ; PendSV Handler
-                DCD     SysTick_Handler           ; SysTick Handler
- -

- The following exception names are fixed and define the start of the vector table for a Cortex-M3: -

-
-__Vectors       DCD     __initial_sp              ; Top of Stack
-                DCD     Reset_Handler             ; Reset Handler
-                DCD     NMI_Handler               ; NMI Handler
-                DCD     HardFault_Handler         ; Hard Fault Handler
-                DCD     MemManage_Handler         ; MPU Fault Handler
-                DCD     BusFault_Handler          ; Bus Fault Handler
-                DCD     UsageFault_Handler        ; Usage Fault Handler
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     0                         ; Reserved
-                DCD     SVC_Handler               ; SVCall Handler
-                DCD     DebugMon_Handler          ; Debug Monitor Handler
-                DCD     0                         ; Reserved
-                DCD     PendSV_Handler            ; PendSV Handler
-                DCD     SysTick_Handler           ; SysTick Handler
- -

- In the following examples for device specific interrupts are shown: -

-
-; External Interrupts
-                DCD     WWDG_IRQHandler           ; Window Watchdog
-                DCD     PVD_IRQHandler            ; PVD through EXTI Line detect
-                DCD     TAMPER_IRQHandler         ; Tamper
- -

- Device specific interrupts must have a dummy function that can be overwritten in user code. - Below is an example for this dummy function. -

-
-Default_Handler PROC
-                EXPORT WWDG_IRQHandler   [WEAK]
-                EXPORT PVD_IRQHandler    [WEAK]
-                EXPORT TAMPER_IRQHandler [WEAK]
-                :
-                :
-                WWDG_IRQHandler
-                PVD_IRQHandler
-                TAMPER_IRQHandler
-                :
-                :
-                B .
-                ENDP
- -

- The user application may simply define an interrupt handler function by using the handler name - as shown below. -

-
-void WWDG_IRQHandler(void)
-{
-  :
-  :
-}
- - -

system_device.c

-

- A template file for system_device.c is provided by ARM but adapted by - the silicon vendor to match their actual device. As a minimum requirement - this file must provide a device specific system configuration function and a global variable - that contains the system frequency. It configures the device and initializes typically the - oscillator (PLL) that is part of the microcontroller device. -

-

- The file system_device.c must provide - as a minimum requirement the SystemInit function as shown below. -

- - - - - - - - - - - - -
Function DefinitionDescription
void SystemInit (void)Setup the microcontroller system. Typically this function configures the - oscillator (PLL) that is part of the microcontroller device. For systems - with variable clock speed it also updates the variable SystemFrequency.
- -

- Also part of the file system_device.c - is the variable SystemFrequency which contains the current CPU clock speed shown below. -

- - - - - - - - - - - - -
Variable DefinitionDescription
uint32_t SystemFrequencyContains the system frequency (which is the system clock frequency supplied - to the SysTick timer and the processor core clock). This variable can be - used by the user application after the call to the function SystemInit() - to setup the SysTick timer or configure other parameters. It may also be - used by debugger to query the frequency of the debug timer or configure - the trace clock speed.

- This variable may also be defined in the const space. - The compiler must be configured to avoid the removal of this variable in - case that the application program is not using it. It is important for - debug systems that the variable is physically present in memory so that - it can be examined to configure the debugger.
- -

Note

-
    -
  • The above definitions are the minimum requirements for the file - system_device.c. This - file may export more functions or variables that provide a more flexible - configuration of the microcontroller system.

    -
  • -
- - -

Core Peripheral Access Layer

- -

Cortex-Mx Core Register Access

-

- The following functions are defined in core_cm0.h / core_cm3.h - and provide access to Cortex-Mx core registers. -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Function DefinitionCoreCore RegisterDescription
void __enable_irq (void)M0, M3PRIMASK = 0Global Interrupt enable (using the instruction CPSIE - i)
void __disable_irq (void)M0, M3PRIMASK = 1Global Interrupt disable (using the instruction - CPSID i)
void __set_PRIMASK (uint32_t value)M0, M3PRIMASK = valueAssign value to Priority Mask Register (using the instruction - MSR)
uint32_t __get_PRIMASK (void)M0, M3return PRIMASKReturn Priority Mask Register (using the instruction - MRS)
void __enable_fault_irq (void)M3FAULTMASK = 0Global Fault exception and Interrupt enable (using the - instruction CPSIE - f)
void __disable_fault_irq (void)M3FAULTMASK = 1Global Fault exception and Interrupt disable (using the - instruction CPSID f)
void __set_FAULTMASK (uint32_t value)M3FAULTMASK = valueAssign value to Fault Mask Register (using the instruction - MSR)
uint32_t __get_FAULTMASK (void)M3return FAULTMASKReturn Fault Mask Register (using the instruction MRS)
void __set_BASEPRI (uint32_t value)M3BASEPRI = valueSet Base Priority (using the instruction MSR)
uiuint32_t __get_BASEPRI (void)M3return BASEPRIReturn Base Priority (using the instruction MRS)
void __set_CONTROL (uint32_t value)M0, M3CONTROL = valueSet CONTROL register value (using the instruction MSR)
uint32_t __get_CONTROL (void)M0, M3return CONTROLReturn Control Register Value (using the instruction - MRS)
void __set_PSP (uint32_t TopOfProcStack)M0, M3PSP = TopOfProcStackSet Process Stack Pointer value (using the instruction - MSR)
uint32_t __get_PSP (void)M0, M3return PSPReturn Process Stack Pointer (using the instruction MRS)
void __set_MSP (uint32_t TopOfMainStack)M0, M3MSP = TopOfMainStackSet Main Stack Pointer (using the instruction MSR)
uint32_t __get_MSP (void)M0, M3return MSPReturn Main Stack Pointer (using the instruction MRS)
- -

Cortex-Mx Instruction Access

-

- The following functions are defined in core_cm0.h / core_cm3.hand - generate specific Cortex-Mx instructions. The functions are implemented in the file - core_cm0.c / core_cm3.c. -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NameCoreGenerated CPU InstructionDescription
void __WFI (void)M0, M3WFIWait for Interrupt
void __WFE (void)M0, M3WFEWait for Event
void __SEV (void)M0, M3SEVSet Event
void __ISB (void)M0, M3ISBInstruction Synchronization Barrier
void __DSB (void)M0, M3DSBData Synchronization Barrier
void __DMB (void)M0, M3DMBData Memory Barrier
uint32_t __REV (uint32_t value)M0, M3REVReverse byte order in integer value.
uint32_t __REV16 (uint16_t value)M0, M3REV16Reverse byte order in unsigned short value.
sint32_t __REVSH (sint16_t value)M0, M3REVSHReverse byte order in signed short value with sign extension to integer.
uint32_t __RBIT (uint32_t value)M3RBITReverse bit order of value
uint8_t __LDREXB (uint8_t *addr)M3LDREXBLoad exclusive byte
uint16_t __LDREXH (uint16_t *addr)M3LDREXHLoad exclusive half-word
uint32_t __LDREXW (uint32_t *addr)M3LDREXWLoad exclusive word
uint32_t __STREXB (uint8_t value, uint8_t *addr)M3STREXBStore exclusive byte
uint32_t __STREXB (uint16_t value, uint16_t *addr)M3STREXHStore exclusive half-word
uint32_t __STREXB (uint32_t value, uint32_t *addr)M3STREXWStore exclusive word
void __CLREX (void)M3CLREXRemove the exclusive lock created by __LDREXB, __LDREXH, or __LDREXW
- - -

NVIC Access Functions

-

- The CMSIS provides access to the NVIC via the register interface structure and several helper - functions that simplify the setup of the NVIC. The CMSIS HAL uses IRQ numbers (IRQn) to - identify the interrupts. The first device interrupt has the IRQn value 0. Therefore negative - IRQn values are used for processor core exceptions. -

-

- For the IRQn values of core exceptions the file device.h provides - the following enum names. -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Core Exception enum ValueCoreIRQnDescription
NonMaskableInt_IRQnM0, M3-14Cortex-Mx Non Maskable Interrupt
HardFault_IRQnM0, M3-13Cortex-Mx Hard Fault Interrupt
MemoryManagement_IRQnM3-12Cortex-Mx Memory Management Interrupt
BusFault_IRQnM3-11Cortex-Mx Bus Fault Interrupt
UsageFault_IRQnM3-10Cortex-Mx Usage Fault Interrupt
SVCall_IRQnM0, M3-5Cortex-Mx SV Call Interrupt
DebugMonitor_IRQnM3-4Cortex-Mx Debug Monitor Interrupt
PendSV_IRQnM0, M3-2Cortex-Mx Pend SV Interrupt
SysTick_IRQnM0, M3-1Cortex-Mx System Tick Interrupt
- -

The following functions simplify the setup of the NVIC. -The functions are defined as static inline.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
NameCoreParameterDescription
void NVIC_SetPriorityGrouping (uint32_t PriorityGroup)M3Priority Grouping ValueSet the Priority Grouping (Groups . Subgroups)
void NVIC_EnableIRQ (IRQn_Type IRQn)M0, M3IRQ NumberEnable IRQn
void NVIC_DisableIRQ (IRQn_Type IRQn)M0, M3IRQ NumberDisable IRQn
uint32_t NVIC_GetPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberReturn 1 if IRQn is pending else 0
void NVIC_SetPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberSet IRQn Pending
void NVIC_ClearPendingIRQ (IRQn_Type IRQn)M0, M3IRQ NumberClear IRQn Pending Status
uint32_t NVIC_GetActive (IRQn_Type IRQn)M3IRQ NumberReturn 1 if IRQn is active else 0
void NVIC_SetPriority (IRQn_Type IRQn, uint32_t priority)M0, M3IRQ Number, PrioritySet Priority for IRQn
- (not threadsafe for Cortex-M0)
uint32_t NVIC_GetPriority (IRQn_Type IRQn)M0, M3IRQ NumberGet Priority for IRQn
uint32_t NVIC_EncodePriority (uint32_t PriorityGroup, uint32_t PreemptPriority, uint32_t SubPriority)M3IRQ Number, Priority Group, Preemtive Priority, Sub PriorityEncode priority for given group, preemtive and sub priority
NVIC_DecodePriority (uint32_t Priority, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority)M3IRQ Number, Priority, pointer to Priority Group, pointer to Preemtive Priority, pointer to Sub PriorityDeccode given priority to group, preemtive and sub priority
void NVIC_SystemReset (void)M0, M3(void)Resets the System
-

Note

-
    -
  • The processor exceptions have negative enum values. Device specific interrupts - have positive enum values and start with 0. The values are defined in - device.h file. -

    -
  • -
  • The values for PreemptPriority and SubPriority - used in functions NVIC_EncodePriority and NVIC_DecodePriority - depend on the available __NVIC_PRIO_BITS implemented in the NVIC. -

    -
  • -
- - -

SysTick Configuration Function

- -

The following function is used to configure the SysTick timer and start the -SysTick interrupt.

- - - - - - - - - - - - - - -
NameParameterDescription
uint32_t SysTickConfig - (uint32_t ticks)ticks is SysTick counter reload valueSetup the SysTick timer and enable the SysTick interrupt. After this - call the SysTick timer creates interrupts with the specified time - interval.
-
- Return: 0 when successful, 1 on failure.
-
- - -

Cortex-M3 ITM Debug Access

- -

The Cortex-M3 incorporates the Instrumented Trace Macrocell (ITM) that -provides together with the Serial Viewer Output trace capabilities for the -microcontroller system. The ITM has 32 communication channels; two ITM -communication channels are used by CMSIS to output the following information:

-
    -
  • ITM Channel 0: implements the ITM_putchar function - which can be used for printf-style output via the debug interface.
  • -
  • ITM Channel 31: is reserved for the RTOS kernel and can be used for - kernel awareness debugging.
  • -
-

Note

-
    -
  • The ITM channel 31 is selected for the RTOS kernel since some kernels - may use the Privileged level for program execution. ITM - channels have 4 groups with 8 channels each, whereby each group can be - configured for access rights in the Unprivileged level. The ITM channel 0 - may be therefore enabled for the user task whereas ITM channel 31 may be - accessible only in Privileged level from the RTOS kernel itself.

    -
  • -
- -

The prototype of the ITM_putchar routine is shown in the -table below.

- - - - - - - - - - - - - - -
NameParameterDescription
void uint32_t ITM_putchar(uint32_t chr)character to outputThe function outputs a character via the ITM channel 0. The - function returns when no debugger is connected that has booked the - output. It is blocking when a debugger is connected, but the - previous character send is not transmitted.

- Return: the input character 'chr'.
- - -

- Example for the usage of the ITM Channel 31 for RTOS Kernels: -

-
-  // check if debugger connected and ITM channel enabled for tracing
-  if ((CoreDebug->DEMCR & CoreDebug_DEMCR_TRCENA) &&
-  (ITM->TCR & ITM_TCR_ITMENA) &&
-  (ITM->TER & (1UL << 31))) {
-    // transmit trace data
-    while (ITM->PORT31_U32 == 0);
-    ITM->PORT[31].u8 = task_id;      // id of next task
-    while (ITM->PORT[31].u32 == 0);
-    ITM->PORT[31].u32 = task_status; // status information
-  }
- - -

CMSIS Example

-

- The following section shows a typical example for using the CMSIS layer in user applications. -

-
-#include <device.h>                              // file name depends on the device used.
-
-void SysTick_Handler (void)  {                   // SysTick Interrupt Handler
-  ;
-}
-
-void TIM1_UP_IRQHandler (void)  {                // Timer Interrupt Handler
-  ;
-}
-
-void timer1_init(int frequency) {
-                                                 // set up Timer (device specific)
-  NVIC_SetPriority (TIM1_UP_IRQn, 1);            // Set Timer priority
-  NVIC_EnableIRQ (TIM1_UP_IRQn);                 // Enable Timer Interrupt
-}
-
-void main (void) {
-  SystemInit ();
-
-  if (SysTick_Config (SystemFrequency / 1000)) { // Setup SysTick Timer for 1 msec interrupts
-    :                                            // Handle Error
-    :
-    while (1);
-  }
-
-  timer1_init ();                                // device specific timer
-
-  while (1);
-}
- - - \ No newline at end of file diff --git a/bsp/stm32_lib3.1.0/Libraries/CMSIS/License.doc b/bsp/stm32_lib3.1.0/Libraries/CMSIS/License.doc deleted file mode 100644 index b6b8acecc137bca709444106cba045d3d01daedd..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 39936 zcmeI53w&Hvz3*2ZZBuBVr4Jqg-IP)q2qBafkZ1Flwy9}S@}SfrFqxSo(8g!^moP(odvq z?1-P~rSnWxy)k$1Uu5y=1Ks4`kH|Iruxr=e*@t}heulg3&0El=OJVTdj~gA%QG|Cj zO)+Lpu`#RnaU+7^2}E5={8@zmi%^7jOmp+yxSuhvaXWRk`>gP6Zlm7w=Y;hFFQKlHfxaQ}ERf8S{OfPon%>RWR!E`Qf)aD%tq)`9jqjy!`t7(C??8 zN6#+|{a z7IHL08H+OOzPDoR@5VzOOM$dFX^6)r68iU4Fg?y;)TbzaJ;w zfA-UD=0C%aU$0-4&mXn(2YTc4*$@5p{bxV)%jXOIe4|5O9{n(1c|ZOc=#m^xbd7Gu zfA;z8Kj#bm`hEQn3@<~+{E9)35(eW{#(!42uD!^k`MrctL%f<0wU(VHKEEdlwYX3W z-7+I9V|p%J1rF>!2i7P1Q%++%5=%s4PA2KJrwO`aPAl=m)Fq=aC!B~nt$ndbyfYpN zXX43()0s@!Ty@D*Cbq>{6OW{lkz^v1O7`@`QWWmY41`lLry-Gvr8>h@)S97|a4LFY zd3oEahE^xkRPVI6hFYA)hPqHwUC60f*%At^2{pAjq}Di%p_Mg_fyl+zdl|P?IJKd+ zb)is`v%b0ASsZF;TSYZBPHRKc%Epk>&{W@WMnipjO=G3g+~UW&)lqvx+xiNphQ@1J z*3kBvhPF_>vv>hd3o4uy6reT{<}|Ocx2?_XEl^k2Tn~v9Yh4?vYgo}xSJT$e+~m~M z)itkKThp|jw#g3V9+g#&ZGed8rpEQox`xI^o2A*!K>ccG{L0&!Z4YUtu9;5R2HRHE zwAol%4y|o-Y8o4TO4~v$Yg+04C^~A_J9QBC5jB5(gUiuv;tUB5O|5Ozpd=!i#mIFH z(AF+qDypt|t?in}WR)VQ>1Yg>?)HYB1Y)Yjgjv6_SwAe>cBdHMB$Il0a0jfE3wI|wV_iv}DxJ|Jq`SjCJx(H-apH+cPd`0e9Ivp2 z;=O%6vEEoB<7%X2r;|i)rJTP0j-GhBI~H})L88-6D%KfGNzFy6%T_U>yC+dIRfiLU zPAn0o4iOiNbSIKM$*y=ztPW?K-teH)5pxo;NGzQWrv{}md&8Sz4hpd!)v4lrsbsW2 zl2KG2`ce8)l*J&?))7fUx@r_7#u8HLbo6H&X-{>VlD+9z&t|g6w)CZFwP(;t$1)lO zO52{q)1%b$;#gHzm7{jzQpcSsR5QJbrYnhrhh4EmEEUcqQ$%!xBb&Umo_I$poDyY_ z?sC(wqtXed)3M$TRYxM+*~DFtKPNex!#(k+HySA?8tdrqa?<`vK%s8bzgC5loNylu zaF-G&NcM>s@jE@3&cu4vKr|KKOap%Llbn`@);gFH>5kKAreC$dXN>~6d$s-q6D#a! zGMv5P^rnGiYE#-SVtw6%Y1-{^dcuRr{tW%>goBw_7wsb!k$5W7AJ0H~I^LB?pCm#S z$2V6vEp3g%Ea{GSbvr$=&9NRtN+aUS-~`n%!OH!`Ze>eNQ(J5KF)S0U{T&!|xWY*eB`cXC2o)m|OQezfm_xl<9wnc!$>|FZYNDx;{zSO5 zGu{)o{K|C4Q&CcpacGp4u(+ebiBSq75SC;#?oKu@inclsD_7*lvo9oVzK}oq!ov8InkN-=GR)6$F&|m1#1josM`yQ&%izL>aK$-GP)72AS3N+YE1V}@Z!qhG|nN+*>Z4EMlpakkPy{(7PVaps+6v9+^K zEJu$`cQporCz3V#BQ#Q0&-V4F`jRLYq%|tJOZHh^*&W`jN#jMuqLoN{q91FE=@HB@ z9IHIZPRLX_ScPJtJNmWx)BViLL8ZYyJO2mbG#iblGpRUANhzLkLwR+_Bi&ZVAUnA= z*-3OVUU7$e(N}4ozCp-DFggdVz@(+EJ>zqf)w!7A^_Dh~tw&<(uXum2 zOsaIJd=z=Mvs2U9YL(PxmJ=2~@hpYT$!I-*S7`*-E``JE*zjDEov;M0(l&~jV@-H1 zFs=&lX1k^gn#5HDEDd&il#3yk&V@j74pY+;9&q#6d6ck2k?zMd*M zrqXKCaOAxHxLt!C%lt|w6VIR;#U<&DSXw5@#HvgM^6TTQl9bAf#S>L{O!UHGmZOYZ z<41bIn=S%3=4?M1;ecHtGK@(w6|+oLbB3vA#n^B)ZkIIF7UiLFS-?fz*$$* zqBXoBge!aI+LlmjYo*h$W^H2wrQ`*))wH#@HMguMwyCbMy&i|E5;w37H=xb+JFN#< zX({px1}eo5S`%uiTSXf+wGEB9t(8tIMOs(X)Tv(QbUa)e+tl3D(6pk323+@<)>kyN zH9?W}XKS3bH7#uob?uEcEza8ZmbJ~Tp-C}9j*m-w$O*NyG`F;RY@oBDmNV$MnAy^> za#fpLIsuJswHR(4#tD;#I)%KUQ8ylgQH<&pN*Kz9<8T8o5h zd1vP+=6>c4WbF{w? zS10U5dcyJE>|%xqO<`0IdeCP<1xBO#D^qmXu7i2QHrp7YtZEESXqosG&Vp>E3p|%t zbWwL4p8H!;*1GW@AQZI+O|Fi>_UnagFV$TNu=ebj$pn!-rQF=IKvg=M7=4>QFhB(Ezd01)hM7RMvJ$qUxSO&mCRh3W?u0ScFLs>xw~6 zr>r=)MbQ@PV)3QPa1?g5dAkD%zf(}&i;b&+p?DN~ zEu89zb89Oexy*N6;cr5Z~NOO^(1jBrsPB2P<8 z50-l@C38l$y`&?Sip1giAnsl`oz&g{3GxBFCRF19`vP(%{Y{D7tsw5363~eUEN4ls zWr)FMyF#*MBSqRqq$(YaN9@*tJH@j3B1|OogsXkzN82q3*@+zU4mU?w2DDz?j3aNdpLvhvULhXC!s;OSYtM1$} zX^0;7#oPK9vdJOdZuCfs$N2pT1c;p~_Mkd#*J!{O{7Lj>TQFTDD;x&Ov^V{ zCs=8$E>Nf7WDbh6f-how!&~CL{k_y;RTmT{2V5oZ?K5dhgZae<%<&#;$0ydxudLFs zR-^++!PUiLtOCEZuQdNyf|?UUoYy5@%`iG>v*avVOZ+#AI?eqqGsi zIKQZ8 zTJ9`}Mx8ZWxaM37oU@LQbF?zV`?@t)@pGz=L$ztq`LZqxzndlpY7B)*WnJV z4YjnbcNWwk@BNHYlO<$m{UO?I1i*i8hiyj1QzXK%rbEIp2mC?+zY+| zUjFgR-@5DitsA$l+q&X}!$p`gxBJ$zkD7Vivris0b*uL=&8v&e>ELV-=Gh!Dulvhq zY|EWSX{C*m{q2F|Yfe;&oA8IIum2K;+aF5mOR8}FjFmx5(} z5PbM%@Zo{H51$XFjCcqp1n=QR$-u%s*cwSgmz z;anlP?DJOhm@#mY=e;jGuz1#GzkK^_!gC32`kNKo?V+YX`p82H)YyHY40p?ZstAe!qC>1tRF&;Xv zTT^D-Jggv^CP4-3SEAKLVxBV%9e(@;r=T0#omX<_pmgcQFXm3mmd;y$R;Me+s2+@6 z0jN(Ca2$G}ChsarTk3_|mkHaVrhIGeEREe)!G8e{g0F+e!H>Ydfqw^o1kIcZUkhR& z13nIJ05^g!fv7*>25~FJ5rw z__fiZte{cSF_IVNAdN*DWI#W-0DKDE0{%O=mUVs`coIAX{sm;$f9_ufe**s>%*P&B z0PX{ig6{y?2s?kd^XZ+B?R@$hPv8CYV>f+bAiiPshSmHGkL}32?A*|DnR70~=}({Y z^So)lKKa{u)AH6i8Qnu3l^>U<(6(kpYu@%H1^N1vSF*Ak$(w^#mt?+?x8}R{cqV7s zej1-SoTQ!$_64VbCeRGR;5G0DXv4-k2b>4e;0ACHxDPxHehPj8ehpp)vI*Y+zXxxD zU0@a`-46qcz~Nvi*aU6@H-lTiz2H&sZSc?F8Sv_}+h2X?)jMB(_SI+Yk8WPw{_IuH zUUlbH7kK|VFX+4~JAXE;`0V&hivCtKTuvxwRxapOt_d7eDvt_kx@xcX7gg!E)7 zpRhKwSo|&HIQjwLXfTbxJ}Cp!!CG)SXa{G30dPLJ99#je2KR!Oz#HHl@cIj{KmPE2 zw|(ZKzS}Ok?K9`x)^yP+BPVzEDJ#<(KK!$svN^1AkDhhj1UY`aWJm5C6KIOO+8|5a zU9*qOU2`@^-c_2mrKR)D_Iy6-aKH2Bn54u_C@E&P=BdWJ>|kTApU?O?#{3pE;}fg} zr-M&|E5WCLe1)sPXTde#T5vts25tm5frIfS=7SyCvF7HL;KOslhY=|w9{wemZN$Tf zZ13jb$zav*;{*QQ@b&2MZT7BoZ_^dM;iF5;9($Ye?PaET+pNWh78Sd3_RlLv`*3+Z zJ_*|x4=-`C*aU6{KLalUhrdWW1bhsf4L%QU2mc$q1PJ&&_F^6Ck+z{FbS6X^>ks6Vfk$x@J4 zk3zveCzs`{-x2>G1&1;BD?k`r3#1Ef0;f2}EC&r>JxGHL_^;rfz-z$Q89TXu6TJG9 zNBQ@)&+Fe+{JU_|$5xt2UF^xpd&=(>1@`3VRbF2#%M(qkoccGL<42YMBX15@I`WPz zb+|dk8yh!AUP`ml`e&5uY@KR*T&u*)(RdXff(`)ZEx`T{vm+|MI_H=pF(0kZ?-_h+_G@{|iIX|& z%(j|W(#Dfh`Xb3NyCe7PZWk?z=A6r)fMd02hL-KzqUZ z+y4>U!N1q^^snFgHws5&8}aa~V79{j`_6%YrD%8eOK1AF<;*;`tJ=!`#X08+y8pYy`+*tPe7E=mG*lmuu3la|*X)Cvc`L6aOS63*zRN}x zZVDWDA33lbQ}K7Zip_E}BP)DUO_NEQl<75L(?i=*Kl@=E?PtzeRa6=#>|HgzEDbVX zEOGUwX8F!tUoiD%#uPtw9#1jTNsax~nK6!8%Y6!T+220XP239FO^~Xq#l+3;cYU33 zxRx2FjS?Ny5F__UDi1XKzKMIX^rurz(HVG zAOW_5!RhRxajNRa2*lHR3(s5j47+u|0jj@@o!RU6Wp{;L`QL(OcGcE`)4?afmEcq0 zCU7wQaKHsXJ8zmQDTnVcNfID0drv#r`(S*&duZIP{BR?ipT1}B>3{Y<*jBzgLHe25 z*|MBK$leF*4BiLp&q4oH_m1L8F#o%}SDnQ<%G$OVj=!`_=u2!@fzN_#z_s9dunpV@ ze3_Xakeds+-|ETF&CqN=Mx}7bgYLNsX)YfMeDV13L6Hegwb*NjU%|bK#+eT#|0rpD zS9`r3A{5-q_B~J9czVL}W#%|_=1Ci;&Y_Z9e5w=<2`>&*nOn@c_MO=KuY-eY@_W_4 zwlBH)GwuCI+xTfyJopme;{F4&M1!Ze9=B zn|2pOJ=usO`7OCFx{>-cG;ixNi@&Q?0iWnxD8v zMss*SAYCP$gjs9k`cTC1;@TVnRJTsJ=q-oJY94Y>!8kx^defnKEBZbRJ_4G-Mc`WS zIdCVq3)~GJ0{;ZQ34RUq9z=bZJukEChN0Q*_V*C`d%$oE9oumNxoC2SC@#jM!3VK^ zqqMD{=jG<$-)RE4-}l^QhK7dpcNH^n?TdF@N5V`~wnO_Iwh(h;Z&R{E63o`!4z?1A zpT5JNK|E%!VzY-WXDBm;Smm!J+{cSABA!15!P(w(huHTB4a_u8s2PJNY|2b&iH7sE zk|NvotQ{&~lL?b>{t|F0xB_VLlY{XLcpe#a+_;Nrgwr6@ z4TtY(NaS1h_uaN~;w0M80G$f@JY0=zT?a0rCl>>`-0Gpf#QSbmK37XzcosYdd~V29 zAI%ZD?mjn4=;=s^BgGTI<(l%byTIj-i#7yY-VP8e9!iG(4d~horqF4$_tAM^OYZ1eK@b4)|~T=O-~R9}7Ee&(qI_BZoW2bv9==bLjY9rMTehnPb)Ei}cv zK|FuO;pWAXBaBW<=-lDG$!fb*^@~%EHT$nS*60Mv_YXMHJkxoy(K-A#SJasM!YfQI zf3$Vil+{LWt98moXJ_@-PKow)M(1)uQ`Z}923=aZ!E88TgPGd3!9>qL+vvQ++_S>w zbG02t@53+LZTg_xV)mW9H3;+l@|y>&)+~XMNA;&5qvh zu0H#5^U8)FnR{!VG9_pH*tB2twE5-v|7wnQerj}5_jKo36FL4_qZ2(Z)x2o*R|z_S zaAfx{%qe^P%IN&M-XZJ6LVM$D=IQd+%}e#K8=ZpeDEXb4y5%kNO3&M-YVj^R#&@Ha zwH0+Un#kWavfD(YY8DF>33RV_?OJYz{Ml{HnIAe~&*3LO4=T%7HQGg6E{(yDcFrVj z?d}-0e}wiFu~vF=e0J&+K@r zm@mKEEaxnJ;&S1|6F;+}*bYxEENNhx7E4c4qGaZ=gd<}WqwA0oW0wK9H8-yCJ6R5t zO}k^tL#*_dTypSI{ej&6_N(o(GPa_^h26PEj{!sMU1i69{5*}5FVBAb$Z*w}dY-;x z*WN6>ry280Q2`Z`|JORie0<>30`B?BYpiyuKTtj!mLRc{W|Qn zC;4q>Hn~sTHf&`%jFH2gY1+|mV6ODp_aB;jdRGz#aY`rbOic2QMYXx*LuQMuzb~7| zrEHqHkobFfC-M@KU60;KP_N$kXjY|t@(bbn#({Uxx~Rr6^%oKI(kE`;`KRXYnfF{< zW{y1k>(5ma_b>^PBc-aDs@ymf(@ts2zEZ5JXvv)TC?7Kzw{?27d z{a+@6_ZkE7L7`R#g<3Nd`t)&IxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>K7bs^ z=l{!(EdI$4e{yTphh|=X6aIhYpYE$CZpx^*K78*=Ab*{J{T|mx?^9kd1hfb6Nx-2- za}Cg&JMA6F*S`bEm;VZoFMmJK+r9q=pY7_V5-K*zq`u_%4TGWR6CBEpY28z=w7?rpP zh~`^>{Piz;&q~w2$H-3@+N@%sAKlnuOVNBb%KHSNt=-=p(L2zw-#T>ZRjYjQFuQA^ z4;2zsxC$I7aG=0}0tX5lC~%;_fdU5#94K(0z<~k>{_Z&-|5N^@{7!j)@=fKn>V3U@ zY`v$~yLma9^26nm%g2^KDo;~Bz24!=cb8|W)3oy6N1x8ssaqYL;i#DPF6R?E;1I9? zyu$&Og@lKJMc{C-7*v2Gz>%O590jU?+*0|^#{iX;|Icw9vkV*ujt3_Io$6KkNrWeZ zQ^2W!qcmnYr~yiU8`OLEdKNwimrly*?|~f?vZr`boPyh(YaXXZd_GBrrcReMx%)N* zE9`^!^VFQxm*~ubB8R-VW9(@-_b;ivsND+o;_oiizT{TnWC|ZjrU$)qTMTBZw*JR68N!YliaPCm8>a?PG-@qtzTACE&pQv*4=K5Vs z`{H;hm~8txd*YveoHC~8yGPFn9{+9UC)t0UTl3p5GIjJ;XUUrRTkVZX*{y3Iw3pxZ zWc#lM&fBe4#?Sn2+8@8h-AjEh?Mrq)D7r4lr^3C zU;jHIYZ|O+)p<3d?3~tpm7iX9g89RTAN+I9wcVQ;h1?Ty;4iuU4^_6tk7NCBgs4Yd zGXeW;_)97i(V8p0u>QZd^_G g!+ZG+YJlCX=dW%57tSBCAIe6m^l&ZsOP@db55$o82LJ#7 diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h deleted file mode 100644 index db6426244..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/misc.h +++ /dev/null @@ -1,219 +0,0 @@ -/** - ****************************************************************************** - * @file misc.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the miscellaneous - * firmware library functions (add-on to CMSIS functions). - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __MISC_H -#define __MISC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup MISC - * @{ - */ - -/** @defgroup MISC_Exported_Types - * @{ - */ - -/** - * @brief NVIC Init Structure definition - */ - -typedef struct -{ - uint8_t NVIC_IRQChannel; /*!< Specifies the IRQ channel to be enabled or disabled. - This parameter can be a value of @ref IRQn_Type - (For the complete STM32 Devices IRQ Channels list, please - refer to stm32f10x.h file) */ - - uint8_t NVIC_IRQChannelPreemptionPriority; /*!< Specifies the pre-emption priority for the IRQ channel - specified in NVIC_IRQChannel. This parameter can be a value - between 0 and 15 as described in the table @ref NVIC_Priority_Table */ - - uint8_t NVIC_IRQChannelSubPriority; /*!< Specifies the subpriority level for the IRQ channel specified - in NVIC_IRQChannel. This parameter can be a value - between 0 and 15 as described in the table @ref NVIC_Priority_Table */ - - FunctionalState NVIC_IRQChannelCmd; /*!< Specifies whether the IRQ channel defined in NVIC_IRQChannel - will be enabled or disabled. - This parameter can be set either to ENABLE or DISABLE */ -} NVIC_InitTypeDef; - -/** - * @} - */ - -/** @defgroup NVIC_Priority_Table - * @{ - */ - -/** -@code - The table below gives the allowed values of the pre-emption priority and subpriority according - to the Priority Grouping configuration performed by NVIC_PriorityGroupConfig function - ============================================================================================================================ - NVIC_PriorityGroup | NVIC_IRQChannelPreemptionPriority | NVIC_IRQChannelSubPriority | Description - ============================================================================================================================ - NVIC_PriorityGroup_0 | 0 | 0-15 | 0 bits for pre-emption priority - | | | 4 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_1 | 0-1 | 0-7 | 1 bits for pre-emption priority - | | | 3 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_2 | 0-3 | 0-3 | 2 bits for pre-emption priority - | | | 2 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_3 | 0-7 | 0-1 | 3 bits for pre-emption priority - | | | 1 bits for subpriority - ---------------------------------------------------------------------------------------------------------------------------- - NVIC_PriorityGroup_4 | 0-15 | 0 | 4 bits for pre-emption priority - | | | 0 bits for subpriority - ============================================================================================================================ -@endcode -*/ - -/** - * @} - */ - -/** @defgroup MISC_Exported_Constants - * @{ - */ - -/** @defgroup Vector_Table_Base - * @{ - */ - -#define NVIC_VectTab_RAM ((uint32_t)0x20000000) -#define NVIC_VectTab_FLASH ((uint32_t)0x08000000) -#define IS_NVIC_VECTTAB(VECTTAB) (((VECTTAB) == NVIC_VectTab_RAM) || \ - ((VECTTAB) == NVIC_VectTab_FLASH)) -/** - * @} - */ - -/** @defgroup System_Low_Power - * @{ - */ - -#define NVIC_LP_SEVONPEND ((uint8_t)0x10) -#define NVIC_LP_SLEEPDEEP ((uint8_t)0x04) -#define NVIC_LP_SLEEPONEXIT ((uint8_t)0x02) -#define IS_NVIC_LP(LP) (((LP) == NVIC_LP_SEVONPEND) || \ - ((LP) == NVIC_LP_SLEEPDEEP) || \ - ((LP) == NVIC_LP_SLEEPONEXIT)) -/** - * @} - */ - -/** @defgroup Preemption_Priority_Group - * @{ - */ - -#define NVIC_PriorityGroup_0 ((uint32_t)0x700) /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PriorityGroup_1 ((uint32_t)0x600) /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PriorityGroup_2 ((uint32_t)0x500) /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PriorityGroup_3 ((uint32_t)0x400) /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PriorityGroup_4 ((uint32_t)0x300) /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ - -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PriorityGroup_0) || \ - ((GROUP) == NVIC_PriorityGroup_1) || \ - ((GROUP) == NVIC_PriorityGroup_2) || \ - ((GROUP) == NVIC_PriorityGroup_3) || \ - ((GROUP) == NVIC_PriorityGroup_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_OFFSET(OFFSET) ((OFFSET) < 0x0007FFFF) - -/** - * @} - */ - -/** @defgroup SysTick_clock_source - * @{ - */ - -#define SysTick_CLKSource_HCLK_Div8 ((uint32_t)0xFFFFFFFB) -#define SysTick_CLKSource_HCLK ((uint32_t)0x00000004) -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SysTick_CLKSource_HCLK) || \ - ((SOURCE) == SysTick_CLKSource_HCLK_Div8)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup MISC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Exported_Functions - * @{ - */ - -void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup); -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct); -void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset); -void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState); -void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource); - -#ifdef __cplusplus -} -#endif - -#endif /* __MISC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h deleted file mode 100644 index fd02a62cd..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_adc.h +++ /dev/null @@ -1,479 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_adc.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the ADC firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_ADC_H -#define __STM32F10x_ADC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup ADC - * @{ - */ - -/** @defgroup ADC_Exported_Types - * @{ - */ - -/** - * @brief ADC Init structure definition - */ - -typedef struct -{ - uint32_t ADC_Mode; /*!< Configures the ADC to operate in independent or - dual mode. - This parameter can be a value of @ref ADC_mode */ - - FunctionalState ADC_ScanConvMode; /*!< Specifies whether the conversion is performed in - Scan (multichannels) or Single (one channel) mode. - This parameter can be set to ENABLE or DISABLE */ - - FunctionalState ADC_ContinuousConvMode; /*!< Specifies whether the conversion is performed in - Continuous or Single mode. - This parameter can be set to ENABLE or DISABLE. */ - - uint32_t ADC_ExternalTrigConv; /*!< Defines the external trigger used to start the analog - to digital conversion of regular channels. This parameter - can be a value of @ref ADC_external_trigger_sources_for_regular_channels_conversion */ - - uint32_t ADC_DataAlign; /*!< Specifies whether the ADC data alignment is left or right. - This parameter can be a value of @ref ADC_data_align */ - - uint8_t ADC_NbrOfChannel; /*!< Specifies the number of ADC channels that will be converted - using the sequencer for regular channel group. - This parameter must range from 1 to 16. */ -}ADC_InitTypeDef; -/** - * @} - */ - -/** @defgroup ADC_Exported_Constants - * @{ - */ - -#define IS_ADC_ALL_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ - ((PERIPH) == ADC2) || \ - ((PERIPH) == ADC3)) - -#define IS_ADC_DMA_PERIPH(PERIPH) (((PERIPH) == ADC1) || \ - ((PERIPH) == ADC3)) - -/** @defgroup ADC_mode - * @{ - */ - -#define ADC_Mode_Independent ((uint32_t)0x00000000) -#define ADC_Mode_RegInjecSimult ((uint32_t)0x00010000) -#define ADC_Mode_RegSimult_AlterTrig ((uint32_t)0x00020000) -#define ADC_Mode_InjecSimult_FastInterl ((uint32_t)0x00030000) -#define ADC_Mode_InjecSimult_SlowInterl ((uint32_t)0x00040000) -#define ADC_Mode_InjecSimult ((uint32_t)0x00050000) -#define ADC_Mode_RegSimult ((uint32_t)0x00060000) -#define ADC_Mode_FastInterl ((uint32_t)0x00070000) -#define ADC_Mode_SlowInterl ((uint32_t)0x00080000) -#define ADC_Mode_AlterTrig ((uint32_t)0x00090000) - -#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \ - ((MODE) == ADC_Mode_RegInjecSimult) || \ - ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \ - ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \ - ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \ - ((MODE) == ADC_Mode_InjecSimult) || \ - ((MODE) == ADC_Mode_RegSimult) || \ - ((MODE) == ADC_Mode_FastInterl) || \ - ((MODE) == ADC_Mode_SlowInterl) || \ - ((MODE) == ADC_Mode_AlterTrig)) -/** - * @} - */ - -/** @defgroup ADC_external_trigger_sources_for_regular_channels_conversion - * @{ - */ - -#define ADC_ExternalTrigConv_T1_CC1 ((uint32_t)0x00000000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_T1_CC2 ((uint32_t)0x00020000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_T2_CC2 ((uint32_t)0x00060000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_T3_TRGO ((uint32_t)0x00080000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_T4_CC4 ((uint32_t)0x000A0000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO ((uint32_t)0x000C0000) /*!< For ADC1 and ADC2 */ - -#define ADC_ExternalTrigConv_T1_CC3 ((uint32_t)0x00040000) /*!< For ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigConv_None ((uint32_t)0x000E0000) /*!< For ADC1, ADC2 and ADC3 */ - -#define ADC_ExternalTrigConv_T3_CC1 ((uint32_t)0x00000000) /*!< For ADC3 only */ -#define ADC_ExternalTrigConv_T2_CC3 ((uint32_t)0x00020000) /*!< For ADC3 only */ -#define ADC_ExternalTrigConv_T8_CC1 ((uint32_t)0x00060000) /*!< For ADC3 only */ -#define ADC_ExternalTrigConv_T8_TRGO ((uint32_t)0x00080000) /*!< For ADC3 only */ -#define ADC_ExternalTrigConv_T5_CC1 ((uint32_t)0x000A0000) /*!< For ADC3 only */ -#define ADC_ExternalTrigConv_T5_CC3 ((uint32_t)0x000C0000) /*!< For ADC3 only */ - -#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \ - ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_None) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \ - ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3)) -/** - * @} - */ - -/** @defgroup ADC_data_align - * @{ - */ - -#define ADC_DataAlign_Right ((uint32_t)0x00000000) -#define ADC_DataAlign_Left ((uint32_t)0x00000800) -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \ - ((ALIGN) == ADC_DataAlign_Left)) -/** - * @} - */ - -/** @defgroup ADC_channels - * @{ - */ - -#define ADC_Channel_0 ((uint8_t)0x00) -#define ADC_Channel_1 ((uint8_t)0x01) -#define ADC_Channel_2 ((uint8_t)0x02) -#define ADC_Channel_3 ((uint8_t)0x03) -#define ADC_Channel_4 ((uint8_t)0x04) -#define ADC_Channel_5 ((uint8_t)0x05) -#define ADC_Channel_6 ((uint8_t)0x06) -#define ADC_Channel_7 ((uint8_t)0x07) -#define ADC_Channel_8 ((uint8_t)0x08) -#define ADC_Channel_9 ((uint8_t)0x09) -#define ADC_Channel_10 ((uint8_t)0x0A) -#define ADC_Channel_11 ((uint8_t)0x0B) -#define ADC_Channel_12 ((uint8_t)0x0C) -#define ADC_Channel_13 ((uint8_t)0x0D) -#define ADC_Channel_14 ((uint8_t)0x0E) -#define ADC_Channel_15 ((uint8_t)0x0F) -#define ADC_Channel_16 ((uint8_t)0x10) -#define ADC_Channel_17 ((uint8_t)0x11) - -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \ - ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \ - ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \ - ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \ - ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \ - ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \ - ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \ - ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \ - ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17)) -/** - * @} - */ - -/** @defgroup ADC_sampling_time - * @{ - */ - -#define ADC_SampleTime_1Cycles5 ((uint8_t)0x00) -#define ADC_SampleTime_7Cycles5 ((uint8_t)0x01) -#define ADC_SampleTime_13Cycles5 ((uint8_t)0x02) -#define ADC_SampleTime_28Cycles5 ((uint8_t)0x03) -#define ADC_SampleTime_41Cycles5 ((uint8_t)0x04) -#define ADC_SampleTime_55Cycles5 ((uint8_t)0x05) -#define ADC_SampleTime_71Cycles5 ((uint8_t)0x06) -#define ADC_SampleTime_239Cycles5 ((uint8_t)0x07) -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \ - ((TIME) == ADC_SampleTime_7Cycles5) || \ - ((TIME) == ADC_SampleTime_13Cycles5) || \ - ((TIME) == ADC_SampleTime_28Cycles5) || \ - ((TIME) == ADC_SampleTime_41Cycles5) || \ - ((TIME) == ADC_SampleTime_55Cycles5) || \ - ((TIME) == ADC_SampleTime_71Cycles5) || \ - ((TIME) == ADC_SampleTime_239Cycles5)) -/** - * @} - */ - -/** @defgroup ADC_external_trigger_sources_for_injected_channels_conversion - * @{ - */ - -#define ADC_ExternalTrigInjecConv_T2_TRGO ((uint32_t)0x00002000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigInjecConv_T2_CC1 ((uint32_t)0x00003000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigInjecConv_T3_CC4 ((uint32_t)0x00004000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigInjecConv_T4_TRGO ((uint32_t)0x00005000) /*!< For ADC1 and ADC2 */ -#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((uint32_t)0x00006000) /*!< For ADC1 and ADC2 */ - -#define ADC_ExternalTrigInjecConv_T1_TRGO ((uint32_t)0x00000000) /*!< For ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigInjecConv_T1_CC4 ((uint32_t)0x00001000) /*!< For ADC1, ADC2 and ADC3 */ -#define ADC_ExternalTrigInjecConv_None ((uint32_t)0x00007000) /*!< For ADC1, ADC2 and ADC3 */ - -#define ADC_ExternalTrigInjecConv_T4_CC3 ((uint32_t)0x00002000) /*!< For ADC3 only */ -#define ADC_ExternalTrigInjecConv_T8_CC2 ((uint32_t)0x00003000) /*!< For ADC3 only */ -#define ADC_ExternalTrigInjecConv_T8_CC4 ((uint32_t)0x00004000) /*!< For ADC3 only */ -#define ADC_ExternalTrigInjecConv_T5_TRGO ((uint32_t)0x00005000) /*!< For ADC3 only */ -#define ADC_ExternalTrigInjecConv_T5_CC4 ((uint32_t)0x00006000) /*!< For ADC3 only */ - -#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \ - ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4)) -/** - * @} - */ - -/** @defgroup ADC_injected_channel_selection - * @{ - */ - -#define ADC_InjectedChannel_1 ((uint8_t)0x14) -#define ADC_InjectedChannel_2 ((uint8_t)0x18) -#define ADC_InjectedChannel_3 ((uint8_t)0x1C) -#define ADC_InjectedChannel_4 ((uint8_t)0x20) -#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \ - ((CHANNEL) == ADC_InjectedChannel_2) || \ - ((CHANNEL) == ADC_InjectedChannel_3) || \ - ((CHANNEL) == ADC_InjectedChannel_4)) -/** - * @} - */ - -/** @defgroup ADC_analog_watchdog_selection - * @{ - */ - -#define ADC_AnalogWatchdog_SingleRegEnable ((uint32_t)0x00800200) -#define ADC_AnalogWatchdog_SingleInjecEnable ((uint32_t)0x00400200) -#define ADC_AnalogWatchdog_SingleRegOrInjecEnable ((uint32_t)0x00C00200) -#define ADC_AnalogWatchdog_AllRegEnable ((uint32_t)0x00800000) -#define ADC_AnalogWatchdog_AllInjecEnable ((uint32_t)0x00400000) -#define ADC_AnalogWatchdog_AllRegAllInjecEnable ((uint32_t)0x00C00000) -#define ADC_AnalogWatchdog_None ((uint32_t)0x00000000) - -#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \ - ((WATCHDOG) == ADC_AnalogWatchdog_None)) -/** - * @} - */ - -/** @defgroup ADC_interrupts_definition - * @{ - */ - -#define ADC_IT_EOC ((uint16_t)0x0220) -#define ADC_IT_AWD ((uint16_t)0x0140) -#define ADC_IT_JEOC ((uint16_t)0x0480) - -#define IS_ADC_IT(IT) ((((IT) & (uint16_t)0xF81F) == 0x00) && ((IT) != 0x00)) - -#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \ - ((IT) == ADC_IT_JEOC)) -/** - * @} - */ - -/** @defgroup ADC_flags_definition - * @{ - */ - -#define ADC_FLAG_AWD ((uint8_t)0x01) -#define ADC_FLAG_EOC ((uint8_t)0x02) -#define ADC_FLAG_JEOC ((uint8_t)0x04) -#define ADC_FLAG_JSTRT ((uint8_t)0x08) -#define ADC_FLAG_STRT ((uint8_t)0x10) -#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint8_t)0xE0) == 0x00) && ((FLAG) != 0x00)) -#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \ - ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \ - ((FLAG) == ADC_FLAG_STRT)) -/** - * @} - */ - -/** @defgroup ADC_thresholds - * @{ - */ - -#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF) - -/** - * @} - */ - -/** @defgroup ADC_injected_offset - * @{ - */ - -#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF) - -/** - * @} - */ - -/** @defgroup ADC_injected_length - * @{ - */ - -#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4)) - -/** - * @} - */ - -/** @defgroup ADC_injected_rank - * @{ - */ - -#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4)) - -/** - * @} - */ - - -/** @defgroup ADC_regular_length - * @{ - */ - -#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10)) -/** - * @} - */ - -/** @defgroup ADC_regular_rank - * @{ - */ - -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10)) - -/** - * @} - */ - -/** @defgroup ADC_regular_discontinuous_mode_number - * @{ - */ - -#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup ADC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup ADC_Exported_Functions - * @{ - */ - -void ADC_DeInit(ADC_TypeDef* ADCx); -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct); -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct); -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState); -void ADC_ResetCalibration(ADC_TypeDef* ADCx); -FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx); -void ADC_StartCalibration(ADC_TypeDef* ADCx); -FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx); -void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx); -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number); -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); -void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx); -uint32_t ADC_GetDualModeConversionValue(void); -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv); -void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState); -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx); -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime); -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length); -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset); -uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel); -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog); -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, uint16_t LowThreshold); -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel); -void ADC_TempSensorVrefintCmd(FunctionalState NewState); -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); -void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG); -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT); -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_ADC_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h deleted file mode 100644 index 531d61f17..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_bkp.h +++ /dev/null @@ -1,194 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_bkp.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the BKP firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_BKP_H -#define __STM32F10x_BKP_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup BKP - * @{ - */ - -/** @defgroup BKP_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Exported_Constants - * @{ - */ - -/** @defgroup Tamper_Pin_active_level - * @{ - */ - -#define BKP_TamperPinLevel_High ((uint16_t)0x0000) -#define BKP_TamperPinLevel_Low ((uint16_t)0x0001) -#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \ - ((LEVEL) == BKP_TamperPinLevel_Low)) -/** - * @} - */ - -/** @defgroup RTC_output_source_to_output_on_the_Tamper_pin - * @{ - */ - -#define BKP_RTCOutputSource_None ((uint16_t)0x0000) -#define BKP_RTCOutputSource_CalibClock ((uint16_t)0x0080) -#define BKP_RTCOutputSource_Alarm ((uint16_t)0x0100) -#define BKP_RTCOutputSource_Second ((uint16_t)0x0300) -#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \ - ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \ - ((SOURCE) == BKP_RTCOutputSource_Alarm) || \ - ((SOURCE) == BKP_RTCOutputSource_Second)) -/** - * @} - */ - -/** @defgroup Data_Backup_Register - * @{ - */ - -#define BKP_DR1 ((uint16_t)0x0004) -#define BKP_DR2 ((uint16_t)0x0008) -#define BKP_DR3 ((uint16_t)0x000C) -#define BKP_DR4 ((uint16_t)0x0010) -#define BKP_DR5 ((uint16_t)0x0014) -#define BKP_DR6 ((uint16_t)0x0018) -#define BKP_DR7 ((uint16_t)0x001C) -#define BKP_DR8 ((uint16_t)0x0020) -#define BKP_DR9 ((uint16_t)0x0024) -#define BKP_DR10 ((uint16_t)0x0028) -#define BKP_DR11 ((uint16_t)0x0040) -#define BKP_DR12 ((uint16_t)0x0044) -#define BKP_DR13 ((uint16_t)0x0048) -#define BKP_DR14 ((uint16_t)0x004C) -#define BKP_DR15 ((uint16_t)0x0050) -#define BKP_DR16 ((uint16_t)0x0054) -#define BKP_DR17 ((uint16_t)0x0058) -#define BKP_DR18 ((uint16_t)0x005C) -#define BKP_DR19 ((uint16_t)0x0060) -#define BKP_DR20 ((uint16_t)0x0064) -#define BKP_DR21 ((uint16_t)0x0068) -#define BKP_DR22 ((uint16_t)0x006C) -#define BKP_DR23 ((uint16_t)0x0070) -#define BKP_DR24 ((uint16_t)0x0074) -#define BKP_DR25 ((uint16_t)0x0078) -#define BKP_DR26 ((uint16_t)0x007C) -#define BKP_DR27 ((uint16_t)0x0080) -#define BKP_DR28 ((uint16_t)0x0084) -#define BKP_DR29 ((uint16_t)0x0088) -#define BKP_DR30 ((uint16_t)0x008C) -#define BKP_DR31 ((uint16_t)0x0090) -#define BKP_DR32 ((uint16_t)0x0094) -#define BKP_DR33 ((uint16_t)0x0098) -#define BKP_DR34 ((uint16_t)0x009C) -#define BKP_DR35 ((uint16_t)0x00A0) -#define BKP_DR36 ((uint16_t)0x00A4) -#define BKP_DR37 ((uint16_t)0x00A8) -#define BKP_DR38 ((uint16_t)0x00AC) -#define BKP_DR39 ((uint16_t)0x00B0) -#define BKP_DR40 ((uint16_t)0x00B4) -#define BKP_DR41 ((uint16_t)0x00B8) -#define BKP_DR42 ((uint16_t)0x00BC) - -#define IS_BKP_DR(DR) (((DR) == BKP_DR1) || ((DR) == BKP_DR2) || ((DR) == BKP_DR3) || \ - ((DR) == BKP_DR4) || ((DR) == BKP_DR5) || ((DR) == BKP_DR6) || \ - ((DR) == BKP_DR7) || ((DR) == BKP_DR8) || ((DR) == BKP_DR9) || \ - ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \ - ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \ - ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \ - ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \ - ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \ - ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \ - ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \ - ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \ - ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \ - ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \ - ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42)) - -#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup BKP_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Exported_Functions - * @{ - */ - -void BKP_DeInit(void); -void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel); -void BKP_TamperPinCmd(FunctionalState NewState); -void BKP_ITConfig(FunctionalState NewState); -void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource); -void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue); -void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data); -uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR); -FlagStatus BKP_GetFlagStatus(void); -void BKP_ClearFlag(void); -ITStatus BKP_GetITStatus(void); -void BKP_ClearITPendingBit(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_BKP_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h deleted file mode 100644 index 712e34c00..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_can.h +++ /dev/null @@ -1,535 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_can.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the CAN firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CAN_H -#define __STM32F10x_CAN_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup CAN - * @{ - */ - -/** @defgroup CAN_Exported_Types - * @{ - */ - -#define IS_CAN_ALL_PERIPH(PERIPH) (((PERIPH) == CAN1) || \ - ((PERIPH) == CAN2)) - -/** - * @brief CAN init structure definition - */ - -typedef struct -{ - uint16_t CAN_Prescaler; /*!< Specifies the length of a time quantum. It ranges from 1 to 1024. */ - - uint8_t CAN_Mode; /*!< Specifies the CAN operating mode. - This parameter can be a value of @ref CAN_operating_mode */ - - uint8_t CAN_SJW; /*!< Specifies the maximum number of time quanta the CAN hardware - is allowed to lengthen or shorten a bit to perform resynchronization. - This parameter can be a value of @ref CAN_synchronisation_jump_width */ - - uint8_t CAN_BS1; /*!< Specifies the number of time quanta in Bit Segment 1. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */ - - uint8_t CAN_BS2; /*!< Specifies the number of time quanta in Bit Segment 2. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ - - FunctionalState CAN_TTCM; /*!< Enable or disable the time triggered communication mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_ABOM; /*!< Enable or disable the automatic bus-off management. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_AWUM; /*!< Enable or disable the automatic wake-up mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_NART; /*!< Enable or disable the no-automatic retransmission mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_RFLM; /*!< Enable or disable the Receive FIFO Locked mode. - This parameter can be set either to ENABLE or DISABLE. */ - - FunctionalState CAN_TXFP; /*!< Enable or disable the transmit FIFO priority. - This parameter can be set either to ENABLE or DISABLE. */ -} CAN_InitTypeDef; - -/** - * @brief CAN filter init structure definition - */ - -typedef struct -{ - uint16_t CAN_FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit - configuration, first one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit - configuration, second one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, - according to the mode (MSBs for a 32-bit configuration, - first one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, - according to the mode (LSBs for a 32-bit configuration, - second one for a 16-bit configuration). - This parameter can be a value between 0x0000 and 0xFFFF */ - - uint16_t CAN_FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. - This parameter can be a value of @ref CAN_filter_FIFO */ - - uint8_t CAN_FilterNumber; /*!< Specifies the filter which will be initialized. It ranges from 0 to 13. */ - - uint8_t CAN_FilterMode; /*!< Specifies the filter mode to be initialized. - This parameter can be a value of @ref CAN_filter_mode */ - - uint8_t CAN_FilterScale; /*!< Specifies the filter scale. - This parameter can be a value of @ref CAN_filter_scale */ - - FunctionalState CAN_FilterActivation; /*!< Enable or disable the filter. - This parameter can be set either to ENABLE or DISABLE. */ -} CAN_FilterInitTypeDef; - -/** - * @brief CAN Tx message structure definition - */ - -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter can be a value between 0 to 0x7FF. */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter can be a value between 0 to 0x1FFFFFFF. */ - - uint8_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted. - This parameter can be a value of @ref CAN_identifier_type */ - - uint8_t RTR; /*!< Specifies the type of frame for the message that will be transmitted. - This parameter can be a value of @ref CAN_remote_transmission_request */ - - uint8_t DLC; /*!< Specifies the length of the frame that will be transmitted. - This parameter can be a value between 0 to 8 */ - - uint8_t Data[8]; /*!< Contains the data to be transmitted. It ranges from 0 to 0xFF. */ -} CanTxMsg; - -/** - * @brief CAN Rx message structure definition - */ - -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter can be a value between 0 to 0x7FF. */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter can be a value between 0 to 0x1FFFFFFF. */ - - uint8_t IDE; /*!< Specifies the type of identifier for the message that will be received. - This parameter can be a value of @ref CAN_identifier_type */ - - uint8_t RTR; /*!< Specifies the type of frame for the received message. - This parameter can be a value of @ref CAN_remote_transmission_request */ - - uint8_t DLC; /*!< Specifies the length of the frame that will be received. - This parameter can be a value between 0 to 8 */ - - uint8_t Data[8]; /*!< Contains the data to be received. It ranges from 0 to 0xFF. */ - - uint8_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through. - This parameter can be a value between 0 to 0xFF */ -} CanRxMsg; - -/** - * @} - */ - -/** @defgroup CAN_Exported_Constants - * @{ - */ - -/** @defgroup CAN_sleep_constants - * @{ - */ - -#define CANINITFAILED ((uint8_t)0x00) /*!< CAN initialization failed */ -#define CANINITOK ((uint8_t)0x01) /*!< CAN initialization failed */ - -/** - * @} - */ - -/** @defgroup CAN_operating_mode - * @{ - */ - -#define CAN_Mode_Normal ((uint8_t)0x00) /*!< normal mode */ -#define CAN_Mode_LoopBack ((uint8_t)0x01) /*!< loopback mode */ -#define CAN_Mode_Silent ((uint8_t)0x02) /*!< silent mode */ -#define CAN_Mode_Silent_LoopBack ((uint8_t)0x03) /*!< loopback combined with silent mode */ - -#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || ((MODE) == CAN_Mode_LoopBack)|| \ - ((MODE) == CAN_Mode_Silent) || ((MODE) == CAN_Mode_Silent_LoopBack)) -/** - * @} - */ - -/** @defgroup CAN_synchronisation_jump_width - * @{ - */ - -#define CAN_SJW_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_SJW_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_SJW_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_SJW_4tq ((uint8_t)0x03) /*!< 4 time quantum */ - -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \ - ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq)) -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_1 - * @{ - */ - -#define CAN_BS1_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_BS1_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_BS1_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_BS1_4tq ((uint8_t)0x03) /*!< 4 time quantum */ -#define CAN_BS1_5tq ((uint8_t)0x04) /*!< 5 time quantum */ -#define CAN_BS1_6tq ((uint8_t)0x05) /*!< 6 time quantum */ -#define CAN_BS1_7tq ((uint8_t)0x06) /*!< 7 time quantum */ -#define CAN_BS1_8tq ((uint8_t)0x07) /*!< 8 time quantum */ -#define CAN_BS1_9tq ((uint8_t)0x08) /*!< 9 time quantum */ -#define CAN_BS1_10tq ((uint8_t)0x09) /*!< 10 time quantum */ -#define CAN_BS1_11tq ((uint8_t)0x0A) /*!< 11 time quantum */ -#define CAN_BS1_12tq ((uint8_t)0x0B) /*!< 12 time quantum */ -#define CAN_BS1_13tq ((uint8_t)0x0C) /*!< 13 time quantum */ -#define CAN_BS1_14tq ((uint8_t)0x0D) /*!< 14 time quantum */ -#define CAN_BS1_15tq ((uint8_t)0x0E) /*!< 15 time quantum */ -#define CAN_BS1_16tq ((uint8_t)0x0F) /*!< 16 time quantum */ - -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq) -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_2 - * @{ - */ - -#define CAN_BS2_1tq ((uint8_t)0x00) /*!< 1 time quantum */ -#define CAN_BS2_2tq ((uint8_t)0x01) /*!< 2 time quantum */ -#define CAN_BS2_3tq ((uint8_t)0x02) /*!< 3 time quantum */ -#define CAN_BS2_4tq ((uint8_t)0x03) /*!< 4 time quantum */ -#define CAN_BS2_5tq ((uint8_t)0x04) /*!< 5 time quantum */ -#define CAN_BS2_6tq ((uint8_t)0x05) /*!< 6 time quantum */ -#define CAN_BS2_7tq ((uint8_t)0x06) /*!< 7 time quantum */ -#define CAN_BS2_8tq ((uint8_t)0x07) /*!< 8 time quantum */ - -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq) - -/** - * @} - */ - -/** @defgroup CAN_clock_prescaler - * @{ - */ - -#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) - -/** - * @} - */ - -/** @defgroup CAN_filter_number - * @{ - */ -#ifndef STM32F10X_CL - #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13) -#else - #define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -/** @defgroup CAN_filter_mode - * @{ - */ - -#define CAN_FilterMode_IdMask ((uint8_t)0x00) /*!< id/mask mode */ -#define CAN_FilterMode_IdList ((uint8_t)0x01) /*!< identifier list mode */ - -#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \ - ((MODE) == CAN_FilterMode_IdList)) -/** - * @} - */ - -/** @defgroup CAN_filter_scale - * @{ - */ - -#define CAN_FilterScale_16bit ((uint8_t)0x00) /*!< Two 16-bit filters */ -#define CAN_FilterScale_32bit ((uint8_t)0x01) /*!< One 32-bit filter */ - -#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \ - ((SCALE) == CAN_FilterScale_32bit)) - -/** - * @} - */ - -/** @defgroup CAN_filter_FIFO - * @{ - */ - -#define CAN_FilterFIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ -#define CAN_FilterFIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ -#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \ - ((FIFO) == CAN_FilterFIFO1)) - -/** - * @} - */ - -/** @defgroup Start_bank_filter_for_slave_CAN - * @{ - */ -#define IS_CAN_BANKNUMBER(BANKNUMBER) (((BANKNUMBER) >= 1) && ((BANKNUMBER) <= 27)) -/** - * @} - */ - -/** @defgroup CAN_Tx - * @{ - */ - -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) -#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) -#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) - -/** - * @} - */ - -/** @defgroup CAN_identifier_type - * @{ - */ - -#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */ -#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */ -#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || ((IDTYPE) == CAN_ID_EXT)) - -/** - * @} - */ - -/** @defgroup CAN_remote_transmission_request - * @{ - */ - -#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */ -#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */ -#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE)) - -/** - * @} - */ - -/** @defgroup CAN_transmit_constants - * @{ - */ - -#define CANTXFAILED ((uint8_t)0x00) /*!< CAN transmission failed */ -#define CANTXOK ((uint8_t)0x01) /*!< CAN transmission succeeded */ -#define CANTXPENDING ((uint8_t)0x02) /*!< CAN transmission pending */ -#define CAN_NO_MB ((uint8_t)0x04) /*!< CAN cell did not provide an empty mailbox */ - -/** - * @} - */ - -/** @defgroup CAN_receive_FIFO_number_constants - * @{ - */ - -#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO0 used to receive */ -#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO1 used to receive */ - -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) - -/** - * @} - */ - -/** @defgroup CAN_sleep_constants - * @{ - */ - -#define CANSLEEPFAILED ((uint8_t)0x00) /*!< CAN did not enter the sleep mode */ -#define CANSLEEPOK ((uint8_t)0x01) /*!< CAN entered the sleep mode */ - -/** - * @} - */ - -/** @defgroup CAN_wake_up_constants - * @{ - */ - -#define CANWAKEUPFAILED ((uint8_t)0x00) /*!< CAN did not leave the sleep mode */ -#define CANWAKEUPOK ((uint8_t)0x01) /*!< CAN leaved the sleep mode */ - -/** - * @} - */ - -/** @defgroup CAN_flags - * @{ - */ - -#define CAN_FLAG_EWG ((uint32_t)0x00000001) /*!< Error Warning Flag */ -#define CAN_FLAG_EPV ((uint32_t)0x00000002) /*!< Error Passive Flag */ -#define CAN_FLAG_BOF ((uint32_t)0x00000004) /*!< Bus-Off Flag */ - -#define IS_CAN_FLAG(FLAG) (((FLAG) == CAN_FLAG_EWG) || ((FLAG) == CAN_FLAG_EPV) ||\ - ((FLAG) == CAN_FLAG_BOF)) - -/** - * @} - */ - -/** @defgroup CAN_interrupts - * @{ - */ - -#define CAN_IT_RQCP0 ((uint32_t)0x00000005) /*!< Request completed mailbox 0 */ -#define CAN_IT_RQCP1 ((uint32_t)0x00000006) /*!< Request completed mailbox 1 */ -#define CAN_IT_RQCP2 ((uint32_t)0x00000007) /*!< Request completed mailbox 2 */ -#define CAN_IT_TME ((uint32_t)0x00000001) /*!< Transmit mailbox empty */ -#define CAN_IT_FMP0 ((uint32_t)0x00000002) /*!< FIFO 0 message pending */ -#define CAN_IT_FF0 ((uint32_t)0x00000004) /*!< FIFO 0 full */ -#define CAN_IT_FOV0 ((uint32_t)0x00000008) /*!< FIFO 0 overrun */ -#define CAN_IT_FMP1 ((uint32_t)0x00000010) /*!< FIFO 1 message pending */ -#define CAN_IT_FF1 ((uint32_t)0x00000020) /*!< FIFO 1 full */ -#define CAN_IT_FOV1 ((uint32_t)0x00000040) /*!< FIFO 1 overrun */ -#define CAN_IT_EWG ((uint32_t)0x00000100) /*!< Error warning */ -#define CAN_IT_EPV ((uint32_t)0x00000200) /*!< Error passive */ -#define CAN_IT_BOF ((uint32_t)0x00000400) /*!< Bus-off */ -#define CAN_IT_LEC ((uint32_t)0x00000800) /*!< Last error code */ -#define CAN_IT_ERR ((uint32_t)0x00008000) /*!< Error */ -#define CAN_IT_WKU ((uint32_t)0x00010000) /*!< Wake-up */ -#define CAN_IT_SLK ((uint32_t)0x00020000) /*!< Sleep */ - -#define IS_CAN_ITConfig(IT) (((IT) == CAN_IT_TME) || ((IT) == CAN_IT_FMP0) ||\ - ((IT) == CAN_IT_FF0) || ((IT) == CAN_IT_FOV0) ||\ - ((IT) == CAN_IT_FMP1) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_LEC) || ((IT) == CAN_IT_ERR) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) - -#define IS_CAN_ITStatus(IT) (((IT) == CAN_IT_RQCP0) || ((IT) == CAN_IT_RQCP1) ||\ - ((IT) == CAN_IT_RQCP2) || ((IT) == CAN_IT_FF0) ||\ - ((IT) == CAN_IT_FOV0) || ((IT) == CAN_IT_FF1) ||\ - ((IT) == CAN_IT_FOV1) || ((IT) == CAN_IT_EWG) ||\ - ((IT) == CAN_IT_EPV) || ((IT) == CAN_IT_BOF) ||\ - ((IT) == CAN_IT_WKU) || ((IT) == CAN_IT_SLK)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup CAN_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Exported_Functions - * @{ - */ - -void CAN_DeInit(CAN_TypeDef* CANx); -uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct); -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct); -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct); -void CAN_SlaveStartBank(uint8_t CAN_BankNumber); -void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState); -uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage); -uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox); -void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox); -void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber); -uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber); -void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage); -void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState); -uint8_t CAN_Sleep(CAN_TypeDef* CANx); -uint8_t CAN_WakeUp(CAN_TypeDef* CANx); -FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG); -void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG); -ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT); -void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_CAN_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h deleted file mode 100644 index 848c15ff2..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_crc.h +++ /dev/null @@ -1,93 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_crc.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the CRC firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CRC_H -#define __STM32F10x_CRC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup CRC - * @{ - */ - -/** @defgroup CRC_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Exported_Constants - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions - * @{ - */ - -void CRC_ResetDR(void); -uint32_t CRC_CalcCRC(uint32_t Data); -uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength); -uint32_t CRC_GetCRC(void); -void CRC_SetIDRegister(uint8_t IDValue); -uint8_t CRC_GetIDRegister(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_CRC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h deleted file mode 100644 index 6c4bc8003..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dac.h +++ /dev/null @@ -1,282 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dac.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the DAC firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DAC_H -#define __STM32F10x_DAC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DAC - * @{ - */ - -/** @defgroup DAC_Exported_Types - * @{ - */ - -/** - * @brief DAC Init structure definition - */ - -typedef struct -{ - uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. - This parameter can be a value of @ref DAC_trigger_selection */ - - uint32_t DAC_WaveGeneration; /*!< Specifies whether DAC channel noise waves or triangle waves - are generated, or whether no wave is generated. - This parameter can be a value of @ref DAC_wave_generation */ - - uint32_t DAC_LFSRUnmask_TriangleAmplitude; /*!< Specifies the LFSR mask for noise wave generation or - the maximum amplitude triangle generation for the DAC channel. - This parameter can be a value of @ref DAC_lfsrunmask_triangleamplitude */ - - uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. - This parameter can be a value of @ref DAC_output_buffer */ -}DAC_InitTypeDef; - -/** - * @} - */ - -/** @defgroup DAC_Exported_Constants - * @{ - */ - -/** @defgroup DAC_trigger_selection - * @{ - */ - -#define DAC_Trigger_None ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register - has been loaded, and not by external trigger */ -#define DAC_Trigger_T6_TRGO ((uint32_t)0x00000004) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T8_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel - only in High-density devices*/ -#define DAC_Trigger_T3_TRGO ((uint32_t)0x0000000C) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel - only in Connectivity line devices */ -#define DAC_Trigger_T7_TRGO ((uint32_t)0x00000014) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T5_TRGO ((uint32_t)0x0000001C) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T2_TRGO ((uint32_t)0x00000024) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_T4_TRGO ((uint32_t)0x0000002C) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_Ext_IT9 ((uint32_t)0x00000034) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ -#define DAC_Trigger_Software ((uint32_t)0x0000003C) /*!< Conversion started by software trigger for DAC channel */ - -#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \ - ((TRIGGER) == DAC_Trigger_T6_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T8_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T7_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T5_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T2_TRGO) || \ - ((TRIGGER) == DAC_Trigger_T4_TRGO) || \ - ((TRIGGER) == DAC_Trigger_Ext_IT9) || \ - ((TRIGGER) == DAC_Trigger_Software)) - -/** - * @} - */ - -/** @defgroup DAC_wave_generation - * @{ - */ - -#define DAC_WaveGeneration_None ((uint32_t)0x00000000) -#define DAC_WaveGeneration_Noise ((uint32_t)0x00000040) -#define DAC_WaveGeneration_Triangle ((uint32_t)0x00000080) -#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \ - ((WAVE) == DAC_WaveGeneration_Noise) || \ - ((WAVE) == DAC_WaveGeneration_Triangle)) -/** - * @} - */ - -/** @defgroup DAC_lfsrunmask_triangleamplitude - * @{ - */ - -#define DAC_LFSRUnmask_Bit0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ -#define DAC_LFSRUnmask_Bits1_0 ((uint32_t)0x00000100) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits2_0 ((uint32_t)0x00000200) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits3_0 ((uint32_t)0x00000300) /*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits4_0 ((uint32_t)0x00000400) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits5_0 ((uint32_t)0x00000500) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits6_0 ((uint32_t)0x00000600) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits7_0 ((uint32_t)0x00000700) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits8_0 ((uint32_t)0x00000800) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits9_0 ((uint32_t)0x00000900) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits10_0 ((uint32_t)0x00000A00) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ -#define DAC_LFSRUnmask_Bits11_0 ((uint32_t)0x00000B00) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ -#define DAC_TriangleAmplitude_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ -#define DAC_TriangleAmplitude_3 ((uint32_t)0x00000100) /*!< Select max triangle amplitude of 3 */ -#define DAC_TriangleAmplitude_7 ((uint32_t)0x00000200) /*!< Select max triangle amplitude of 7 */ -#define DAC_TriangleAmplitude_15 ((uint32_t)0x00000300) /*!< Select max triangle amplitude of 15 */ -#define DAC_TriangleAmplitude_31 ((uint32_t)0x00000400) /*!< Select max triangle amplitude of 31 */ -#define DAC_TriangleAmplitude_63 ((uint32_t)0x00000500) /*!< Select max triangle amplitude of 63 */ -#define DAC_TriangleAmplitude_127 ((uint32_t)0x00000600) /*!< Select max triangle amplitude of 127 */ -#define DAC_TriangleAmplitude_255 ((uint32_t)0x00000700) /*!< Select max triangle amplitude of 255 */ -#define DAC_TriangleAmplitude_511 ((uint32_t)0x00000800) /*!< Select max triangle amplitude of 511 */ -#define DAC_TriangleAmplitude_1023 ((uint32_t)0x00000900) /*!< Select max triangle amplitude of 1023 */ -#define DAC_TriangleAmplitude_2047 ((uint32_t)0x00000A00) /*!< Select max triangle amplitude of 2047 */ -#define DAC_TriangleAmplitude_4095 ((uint32_t)0x00000B00) /*!< Select max triangle amplitude of 4095 */ - -#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \ - ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \ - ((VALUE) == DAC_TriangleAmplitude_1) || \ - ((VALUE) == DAC_TriangleAmplitude_3) || \ - ((VALUE) == DAC_TriangleAmplitude_7) || \ - ((VALUE) == DAC_TriangleAmplitude_15) || \ - ((VALUE) == DAC_TriangleAmplitude_31) || \ - ((VALUE) == DAC_TriangleAmplitude_63) || \ - ((VALUE) == DAC_TriangleAmplitude_127) || \ - ((VALUE) == DAC_TriangleAmplitude_255) || \ - ((VALUE) == DAC_TriangleAmplitude_511) || \ - ((VALUE) == DAC_TriangleAmplitude_1023) || \ - ((VALUE) == DAC_TriangleAmplitude_2047) || \ - ((VALUE) == DAC_TriangleAmplitude_4095)) -/** - * @} - */ - -/** @defgroup DAC_output_buffer - * @{ - */ - -#define DAC_OutputBuffer_Enable ((uint32_t)0x00000000) -#define DAC_OutputBuffer_Disable ((uint32_t)0x00000002) -#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \ - ((STATE) == DAC_OutputBuffer_Disable)) -/** - * @} - */ - -/** @defgroup DAC_Channel_selection - * @{ - */ - -#define DAC_Channel_1 ((uint32_t)0x00000000) -#define DAC_Channel_2 ((uint32_t)0x00000010) -#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \ - ((CHANNEL) == DAC_Channel_2)) -/** - * @} - */ - -/** @defgroup DAC_data_alignement - * @{ - */ - -#define DAC_Align_12b_R ((uint32_t)0x00000000) -#define DAC_Align_12b_L ((uint32_t)0x00000004) -#define DAC_Align_8b_R ((uint32_t)0x00000008) -#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \ - ((ALIGN) == DAC_Align_12b_L) || \ - ((ALIGN) == DAC_Align_8b_R)) -/** - * @} - */ - -/** @defgroup DAC_wave_generation - * @{ - */ - -#define DAC_Wave_Noise ((uint32_t)0x00000040) -#define DAC_Wave_Triangle ((uint32_t)0x00000080) -#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \ - ((WAVE) == DAC_Wave_Triangle)) -/** - * @} - */ - -/** @defgroup DAC_data - * @{ - */ - -#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup DAC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DAC_Exported_Functions - * @{ - */ - -void DAC_DeInit(void); -void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct); -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct); -void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState); -void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState); -void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState); -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState); -void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState); -void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data); -void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data); -void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1); -uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_DAC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h deleted file mode 100644 index 0889683a5..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dbgmcu.h +++ /dev/null @@ -1,109 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dbgmcu.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the DBGMCU - * firmware library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DBGMCU_H -#define __STM32F10x_DBGMCU_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DBGMCU - * @{ - */ - -/** @defgroup DBGMCU_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Exported_Constants - * @{ - */ - -#define DBGMCU_SLEEP ((uint32_t)0x00000001) -#define DBGMCU_STOP ((uint32_t)0x00000002) -#define DBGMCU_STANDBY ((uint32_t)0x00000004) -#define DBGMCU_IWDG_STOP ((uint32_t)0x00000100) -#define DBGMCU_WWDG_STOP ((uint32_t)0x00000200) -#define DBGMCU_TIM1_STOP ((uint32_t)0x00000400) -#define DBGMCU_TIM2_STOP ((uint32_t)0x00000800) -#define DBGMCU_TIM3_STOP ((uint32_t)0x00001000) -#define DBGMCU_TIM4_STOP ((uint32_t)0x00002000) -#define DBGMCU_CAN1_STOP ((uint32_t)0x00004000) -#define DBGMCU_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00008000) -#define DBGMCU_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00010000) -#define DBGMCU_TIM8_STOP ((uint32_t)0x00020000) -#define DBGMCU_TIM5_STOP ((uint32_t)0x00040000) -#define DBGMCU_TIM6_STOP ((uint32_t)0x00080000) -#define DBGMCU_TIM7_STOP ((uint32_t)0x00100000) -#define DBGMCU_CAN2_STOP ((uint32_t)0x00200000) - -#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFC000F8) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup DBGMCU_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Exported_Functions - * @{ - */ - -uint32_t DBGMCU_GetREVID(void); -uint32_t DBGMCU_GetDEVID(void); -void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_DBGMCU_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h deleted file mode 100644 index 9a1fe4b78..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_dma.h +++ /dev/null @@ -1,437 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dma.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the DMA firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_DMA_H -#define __STM32F10x_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/** @defgroup DMA_Exported_Types - * @{ - */ - -/** - * @brief DMA Init structure definition - */ - -typedef struct -{ - uint32_t DMA_PeripheralBaseAddr; /*!< Specifies the peripheral base address for DMAy Channelx. */ - - uint32_t DMA_MemoryBaseAddr; /*!< Specifies the memory base address for DMAy Channelx. */ - - uint32_t DMA_DIR; /*!< Specifies if the peripheral is the source or destination. - This parameter can be a value of @ref DMA_data_transfer_direction */ - - uint32_t DMA_BufferSize; /*!< Specifies the buffer size, in data unit, of the specified Channel. - The data unit is equal to the configuration set in DMA_PeripheralDataSize - or DMA_MemoryDataSize members depending in the transfer direction. */ - - uint32_t DMA_PeripheralInc; /*!< Specifies whether the Peripheral address register is incremented or not. - This parameter can be a value of @ref DMA_peripheral_incremented_mode */ - - uint32_t DMA_MemoryInc; /*!< Specifies whether the memory address register is incremented or not. - This parameter can be a value of @ref DMA_memory_incremented_mode */ - - uint32_t DMA_PeripheralDataSize; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_peripheral_data_size */ - - uint32_t DMA_MemoryDataSize; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_memory_data_size */ - - uint32_t DMA_Mode; /*!< Specifies the operation mode of the DMAy Channelx. - This parameter can be a value of @ref DMA_circular_normal_mode. - @note: The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Channel */ - - uint32_t DMA_Priority; /*!< Specifies the software priority for the DMAy Channelx. - This parameter can be a value of @ref DMA_priority_level */ - - uint32_t DMA_M2M; /*!< Specifies if the DMAy Channelx will be used in memory-to-memory transfer. - This parameter can be a value of @ref DMA_memory_to_memory */ -}DMA_InitTypeDef; - -/** - * @} - */ - -/** @defgroup DMA_Exported_Constants - * @{ - */ - -#define IS_DMA_ALL_PERIPH(PERIPH) (((PERIPH) == DMA1_Channel1) || \ - ((PERIPH) == DMA1_Channel2) || \ - ((PERIPH) == DMA1_Channel3) || \ - ((PERIPH) == DMA1_Channel4) || \ - ((PERIPH) == DMA1_Channel5) || \ - ((PERIPH) == DMA1_Channel6) || \ - ((PERIPH) == DMA1_Channel7) || \ - ((PERIPH) == DMA2_Channel1) || \ - ((PERIPH) == DMA2_Channel2) || \ - ((PERIPH) == DMA2_Channel3) || \ - ((PERIPH) == DMA2_Channel4) || \ - ((PERIPH) == DMA2_Channel5)) - -/** @defgroup DMA_data_transfer_direction - * @{ - */ - -#define DMA_DIR_PeripheralDST ((uint32_t)0x00000010) -#define DMA_DIR_PeripheralSRC ((uint32_t)0x00000000) -#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \ - ((DIR) == DMA_DIR_PeripheralSRC)) -/** - * @} - */ - -/** @defgroup DMA_peripheral_incremented_mode - * @{ - */ - -#define DMA_PeripheralInc_Enable ((uint32_t)0x00000040) -#define DMA_PeripheralInc_Disable ((uint32_t)0x00000000) -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \ - ((STATE) == DMA_PeripheralInc_Disable)) -/** - * @} - */ - -/** @defgroup DMA_memory_incremented_mode - * @{ - */ - -#define DMA_MemoryInc_Enable ((uint32_t)0x00000080) -#define DMA_MemoryInc_Disable ((uint32_t)0x00000000) -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \ - ((STATE) == DMA_MemoryInc_Disable)) -/** - * @} - */ - -/** @defgroup DMA_peripheral_data_size - * @{ - */ - -#define DMA_PeripheralDataSize_Byte ((uint32_t)0x00000000) -#define DMA_PeripheralDataSize_HalfWord ((uint32_t)0x00000100) -#define DMA_PeripheralDataSize_Word ((uint32_t)0x00000200) -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \ - ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \ - ((SIZE) == DMA_PeripheralDataSize_Word)) -/** - * @} - */ - -/** @defgroup DMA_memory_data_size - * @{ - */ - -#define DMA_MemoryDataSize_Byte ((uint32_t)0x00000000) -#define DMA_MemoryDataSize_HalfWord ((uint32_t)0x00000400) -#define DMA_MemoryDataSize_Word ((uint32_t)0x00000800) -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \ - ((SIZE) == DMA_MemoryDataSize_HalfWord) || \ - ((SIZE) == DMA_MemoryDataSize_Word)) -/** - * @} - */ - -/** @defgroup DMA_circular_normal_mode - * @{ - */ - -#define DMA_Mode_Circular ((uint32_t)0x00000020) -#define DMA_Mode_Normal ((uint32_t)0x00000000) -#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal)) -/** - * @} - */ - -/** @defgroup DMA_priority_level - * @{ - */ - -#define DMA_Priority_VeryHigh ((uint32_t)0x00003000) -#define DMA_Priority_High ((uint32_t)0x00002000) -#define DMA_Priority_Medium ((uint32_t)0x00001000) -#define DMA_Priority_Low ((uint32_t)0x00000000) -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \ - ((PRIORITY) == DMA_Priority_High) || \ - ((PRIORITY) == DMA_Priority_Medium) || \ - ((PRIORITY) == DMA_Priority_Low)) -/** - * @} - */ - -/** @defgroup DMA_memory_to_memory - * @{ - */ - -#define DMA_M2M_Enable ((uint32_t)0x00004000) -#define DMA_M2M_Disable ((uint32_t)0x00000000) -#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable)) - -/** - * @} - */ - -/** @defgroup DMA_interrupts_definition - * @{ - */ - -#define DMA_IT_TC ((uint32_t)0x00000002) -#define DMA_IT_HT ((uint32_t)0x00000004) -#define DMA_IT_TE ((uint32_t)0x00000008) -#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00)) - -#define DMA1_IT_GL1 ((uint32_t)0x00000001) -#define DMA1_IT_TC1 ((uint32_t)0x00000002) -#define DMA1_IT_HT1 ((uint32_t)0x00000004) -#define DMA1_IT_TE1 ((uint32_t)0x00000008) -#define DMA1_IT_GL2 ((uint32_t)0x00000010) -#define DMA1_IT_TC2 ((uint32_t)0x00000020) -#define DMA1_IT_HT2 ((uint32_t)0x00000040) -#define DMA1_IT_TE2 ((uint32_t)0x00000080) -#define DMA1_IT_GL3 ((uint32_t)0x00000100) -#define DMA1_IT_TC3 ((uint32_t)0x00000200) -#define DMA1_IT_HT3 ((uint32_t)0x00000400) -#define DMA1_IT_TE3 ((uint32_t)0x00000800) -#define DMA1_IT_GL4 ((uint32_t)0x00001000) -#define DMA1_IT_TC4 ((uint32_t)0x00002000) -#define DMA1_IT_HT4 ((uint32_t)0x00004000) -#define DMA1_IT_TE4 ((uint32_t)0x00008000) -#define DMA1_IT_GL5 ((uint32_t)0x00010000) -#define DMA1_IT_TC5 ((uint32_t)0x00020000) -#define DMA1_IT_HT5 ((uint32_t)0x00040000) -#define DMA1_IT_TE5 ((uint32_t)0x00080000) -#define DMA1_IT_GL6 ((uint32_t)0x00100000) -#define DMA1_IT_TC6 ((uint32_t)0x00200000) -#define DMA1_IT_HT6 ((uint32_t)0x00400000) -#define DMA1_IT_TE6 ((uint32_t)0x00800000) -#define DMA1_IT_GL7 ((uint32_t)0x01000000) -#define DMA1_IT_TC7 ((uint32_t)0x02000000) -#define DMA1_IT_HT7 ((uint32_t)0x04000000) -#define DMA1_IT_TE7 ((uint32_t)0x08000000) - -#define DMA2_IT_GL1 ((uint32_t)0x10000001) -#define DMA2_IT_TC1 ((uint32_t)0x10000002) -#define DMA2_IT_HT1 ((uint32_t)0x10000004) -#define DMA2_IT_TE1 ((uint32_t)0x10000008) -#define DMA2_IT_GL2 ((uint32_t)0x10000010) -#define DMA2_IT_TC2 ((uint32_t)0x10000020) -#define DMA2_IT_HT2 ((uint32_t)0x10000040) -#define DMA2_IT_TE2 ((uint32_t)0x10000080) -#define DMA2_IT_GL3 ((uint32_t)0x10000100) -#define DMA2_IT_TC3 ((uint32_t)0x10000200) -#define DMA2_IT_HT3 ((uint32_t)0x10000400) -#define DMA2_IT_TE3 ((uint32_t)0x10000800) -#define DMA2_IT_GL4 ((uint32_t)0x10001000) -#define DMA2_IT_TC4 ((uint32_t)0x10002000) -#define DMA2_IT_HT4 ((uint32_t)0x10004000) -#define DMA2_IT_TE4 ((uint32_t)0x10008000) -#define DMA2_IT_GL5 ((uint32_t)0x10010000) -#define DMA2_IT_TC5 ((uint32_t)0x10020000) -#define DMA2_IT_HT5 ((uint32_t)0x10040000) -#define DMA2_IT_TE5 ((uint32_t)0x10080000) - -#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00)) - -#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \ - ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \ - ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \ - ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \ - ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \ - ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \ - ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \ - ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \ - ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \ - ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \ - ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \ - ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \ - ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \ - ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \ - ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \ - ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \ - ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \ - ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \ - ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \ - ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \ - ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \ - ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \ - ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \ - ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5)) - -/** - * @} - */ - -/** @defgroup DMA_flags_definition - * @{ - */ -#define DMA1_FLAG_GL1 ((uint32_t)0x00000001) -#define DMA1_FLAG_TC1 ((uint32_t)0x00000002) -#define DMA1_FLAG_HT1 ((uint32_t)0x00000004) -#define DMA1_FLAG_TE1 ((uint32_t)0x00000008) -#define DMA1_FLAG_GL2 ((uint32_t)0x00000010) -#define DMA1_FLAG_TC2 ((uint32_t)0x00000020) -#define DMA1_FLAG_HT2 ((uint32_t)0x00000040) -#define DMA1_FLAG_TE2 ((uint32_t)0x00000080) -#define DMA1_FLAG_GL3 ((uint32_t)0x00000100) -#define DMA1_FLAG_TC3 ((uint32_t)0x00000200) -#define DMA1_FLAG_HT3 ((uint32_t)0x00000400) -#define DMA1_FLAG_TE3 ((uint32_t)0x00000800) -#define DMA1_FLAG_GL4 ((uint32_t)0x00001000) -#define DMA1_FLAG_TC4 ((uint32_t)0x00002000) -#define DMA1_FLAG_HT4 ((uint32_t)0x00004000) -#define DMA1_FLAG_TE4 ((uint32_t)0x00008000) -#define DMA1_FLAG_GL5 ((uint32_t)0x00010000) -#define DMA1_FLAG_TC5 ((uint32_t)0x00020000) -#define DMA1_FLAG_HT5 ((uint32_t)0x00040000) -#define DMA1_FLAG_TE5 ((uint32_t)0x00080000) -#define DMA1_FLAG_GL6 ((uint32_t)0x00100000) -#define DMA1_FLAG_TC6 ((uint32_t)0x00200000) -#define DMA1_FLAG_HT6 ((uint32_t)0x00400000) -#define DMA1_FLAG_TE6 ((uint32_t)0x00800000) -#define DMA1_FLAG_GL7 ((uint32_t)0x01000000) -#define DMA1_FLAG_TC7 ((uint32_t)0x02000000) -#define DMA1_FLAG_HT7 ((uint32_t)0x04000000) -#define DMA1_FLAG_TE7 ((uint32_t)0x08000000) - -#define DMA2_FLAG_GL1 ((uint32_t)0x10000001) -#define DMA2_FLAG_TC1 ((uint32_t)0x10000002) -#define DMA2_FLAG_HT1 ((uint32_t)0x10000004) -#define DMA2_FLAG_TE1 ((uint32_t)0x10000008) -#define DMA2_FLAG_GL2 ((uint32_t)0x10000010) -#define DMA2_FLAG_TC2 ((uint32_t)0x10000020) -#define DMA2_FLAG_HT2 ((uint32_t)0x10000040) -#define DMA2_FLAG_TE2 ((uint32_t)0x10000080) -#define DMA2_FLAG_GL3 ((uint32_t)0x10000100) -#define DMA2_FLAG_TC3 ((uint32_t)0x10000200) -#define DMA2_FLAG_HT3 ((uint32_t)0x10000400) -#define DMA2_FLAG_TE3 ((uint32_t)0x10000800) -#define DMA2_FLAG_GL4 ((uint32_t)0x10001000) -#define DMA2_FLAG_TC4 ((uint32_t)0x10002000) -#define DMA2_FLAG_HT4 ((uint32_t)0x10004000) -#define DMA2_FLAG_TE4 ((uint32_t)0x10008000) -#define DMA2_FLAG_GL5 ((uint32_t)0x10010000) -#define DMA2_FLAG_TC5 ((uint32_t)0x10020000) -#define DMA2_FLAG_HT5 ((uint32_t)0x10040000) -#define DMA2_FLAG_TE5 ((uint32_t)0x10080000) - -#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00)) - -#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \ - ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \ - ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \ - ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \ - ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \ - ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \ - ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \ - ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \ - ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \ - ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \ - ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \ - ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \ - ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \ - ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \ - ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \ - ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \ - ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \ - ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \ - ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \ - ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \ - ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \ - ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \ - ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \ - ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5)) -/** - * @} - */ - -/** @defgroup DMA_Buffer_Size - * @{ - */ - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup DMA_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions - * @{ - */ - -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx); -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct); -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct); -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState); -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState); -uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx); -FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG); -void DMA_ClearFlag(uint32_t DMA_FLAG); -ITStatus DMA_GetITStatus(uint32_t DMA_IT); -void DMA_ClearITPendingBit(uint32_t DMA_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_DMA_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h deleted file mode 100644 index 8c011c1c8..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_exti.h +++ /dev/null @@ -1,183 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_exti.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the EXTI firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_EXTI_H -#define __STM32F10x_EXTI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup EXTI - * @{ - */ - -/** @defgroup EXTI_Exported_Types - * @{ - */ - -/** - * @brief EXTI mode enumeration - */ - -typedef enum -{ - EXTI_Mode_Interrupt = 0x00, - EXTI_Mode_Event = 0x04 -}EXTIMode_TypeDef; - -#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event)) - -/** - * @brief EXTI Trigger enumeration - */ - -typedef enum -{ - EXTI_Trigger_Rising = 0x08, - EXTI_Trigger_Falling = 0x0C, - EXTI_Trigger_Rising_Falling = 0x10 -}EXTITrigger_TypeDef; - -#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \ - ((TRIGGER) == EXTI_Trigger_Falling) || \ - ((TRIGGER) == EXTI_Trigger_Rising_Falling)) -/** - * @brief EXTI Init Structure definition - */ - -typedef struct -{ - uint32_t EXTI_Line; /*!< Specifies the EXTI lines to be enabled or disabled. - This parameter can be any combination of @ref EXTI_Lines */ - - EXTIMode_TypeDef EXTI_Mode; /*!< Specifies the mode for the EXTI lines. - This parameter can be a value of @ref EXTIMode_TypeDef */ - - EXTITrigger_TypeDef EXTI_Trigger; /*!< Specifies the trigger signal active edge for the EXTI lines. - This parameter can be a value of @ref EXTIMode_TypeDef */ - - FunctionalState EXTI_LineCmd; /*!< Specifies the new state of the selected EXTI lines. - This parameter can be set either to ENABLE or DISABLE */ -}EXTI_InitTypeDef; - -/** - * @} - */ - -/** @defgroup EXTI_Exported_Constants - * @{ - */ - -/** @defgroup EXTI_Lines - * @{ - */ - -#define EXTI_Line0 ((uint32_t)0x00001) /*!< External interrupt line 0 */ -#define EXTI_Line1 ((uint32_t)0x00002) /*!< External interrupt line 1 */ -#define EXTI_Line2 ((uint32_t)0x00004) /*!< External interrupt line 2 */ -#define EXTI_Line3 ((uint32_t)0x00008) /*!< External interrupt line 3 */ -#define EXTI_Line4 ((uint32_t)0x00010) /*!< External interrupt line 4 */ -#define EXTI_Line5 ((uint32_t)0x00020) /*!< External interrupt line 5 */ -#define EXTI_Line6 ((uint32_t)0x00040) /*!< External interrupt line 6 */ -#define EXTI_Line7 ((uint32_t)0x00080) /*!< External interrupt line 7 */ -#define EXTI_Line8 ((uint32_t)0x00100) /*!< External interrupt line 8 */ -#define EXTI_Line9 ((uint32_t)0x00200) /*!< External interrupt line 9 */ -#define EXTI_Line10 ((uint32_t)0x00400) /*!< External interrupt line 10 */ -#define EXTI_Line11 ((uint32_t)0x00800) /*!< External interrupt line 11 */ -#define EXTI_Line12 ((uint32_t)0x01000) /*!< External interrupt line 12 */ -#define EXTI_Line13 ((uint32_t)0x02000) /*!< External interrupt line 13 */ -#define EXTI_Line14 ((uint32_t)0x04000) /*!< External interrupt line 14 */ -#define EXTI_Line15 ((uint32_t)0x08000) /*!< External interrupt line 15 */ -#define EXTI_Line16 ((uint32_t)0x10000) /*!< External interrupt line 16 Connected to the PVD Output */ -#define EXTI_Line17 ((uint32_t)0x20000) /*!< External interrupt line 17 Connected to the RTC Alarm event */ -#define EXTI_Line18 ((uint32_t)0x40000) /*!< External interrupt line 18 Connected to the USB Device/USB OTG FS - Wakeup from suspend event */ -#define EXTI_Line19 ((uint32_t)0x80000) /*!< External interrupt line 19 Connected to the Ethernet Wakeup event */ - -#define IS_EXTI_LINE(LINE) ((((LINE) & (uint32_t)0xFFF00000) == 0x00) && ((LINE) != (uint16_t)0x00)) - -#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \ - ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \ - ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \ - ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \ - ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \ - ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \ - ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \ - ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \ - ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \ - ((LINE) == EXTI_Line18) || ((LINE) == EXTI_Line19)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup EXTI_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Exported_Functions - * @{ - */ - -void EXTI_DeInit(void); -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct); -void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line); -FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line); -void EXTI_ClearFlag(uint32_t EXTI_Line); -ITStatus EXTI_GetITStatus(uint32_t EXTI_Line); -void EXTI_ClearITPendingBit(uint32_t EXTI_Line); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_EXTI_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h deleted file mode 100644 index 1c310231c..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_flash.h +++ /dev/null @@ -1,346 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_flash.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the FLASH - * firmware library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FLASH_H -#define __STM32F10x_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/** @defgroup FLASH_Exported_Types - * @{ - */ - -/** - * @brief FLASH Status - */ - -typedef enum -{ - FLASH_BUSY = 1, - FLASH_ERROR_PG, - FLASH_ERROR_WRP, - FLASH_COMPLETE, - FLASH_TIMEOUT -}FLASH_Status; - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Constants - * @{ - */ - -/** @defgroup Flash_Latency - * @{ - */ - -#define FLASH_Latency_0 ((uint32_t)0x00000000) /*!< FLASH Zero Latency cycle */ -#define FLASH_Latency_1 ((uint32_t)0x00000001) /*!< FLASH One Latency cycle */ -#define FLASH_Latency_2 ((uint32_t)0x00000002) /*!< FLASH Two Latency cycles */ -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \ - ((LATENCY) == FLASH_Latency_1) || \ - ((LATENCY) == FLASH_Latency_2)) -/** - * @} - */ - -/** @defgroup Half_Cycle_Enable_Disable - * @{ - */ - -#define FLASH_HalfCycleAccess_Enable ((uint32_t)0x00000008) /*!< FLASH Half Cycle Enable */ -#define FLASH_HalfCycleAccess_Disable ((uint32_t)0x00000000) /*!< FLASH Half Cycle Disable */ -#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \ - ((STATE) == FLASH_HalfCycleAccess_Disable)) -/** - * @} - */ - -/** @defgroup Prefetch_Buffer_Enable_Disable - * @{ - */ - -#define FLASH_PrefetchBuffer_Enable ((uint32_t)0x00000010) /*!< FLASH Prefetch Buffer Enable */ -#define FLASH_PrefetchBuffer_Disable ((uint32_t)0x00000000) /*!< FLASH Prefetch Buffer Disable */ -#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \ - ((STATE) == FLASH_PrefetchBuffer_Disable)) -/** - * @} - */ - -/** @defgroup Option_Bytes_Write_Protection - * @{ - */ - -/* Values to be used with STM32 Low and Medium density devices */ -#define FLASH_WRProt_Pages0to3 ((uint32_t)0x00000001) /*!< STM32 Low and Medium density devices: Write protection of page 0 to 3 */ -#define FLASH_WRProt_Pages4to7 ((uint32_t)0x00000002) /*!< STM32 Low and Medium density devices: Write protection of page 4 to 7 */ -#define FLASH_WRProt_Pages8to11 ((uint32_t)0x00000004) /*!< STM32 Low and Medium density devices: Write protection of page 8 to 11 */ -#define FLASH_WRProt_Pages12to15 ((uint32_t)0x00000008) /*!< STM32 Low and Medium density devices: Write protection of page 12 to 15 */ -#define FLASH_WRProt_Pages16to19 ((uint32_t)0x00000010) /*!< STM32 Low and Medium density devices: Write protection of page 16 to 19 */ -#define FLASH_WRProt_Pages20to23 ((uint32_t)0x00000020) /*!< STM32 Low and Medium density devices: Write protection of page 20 to 23 */ -#define FLASH_WRProt_Pages24to27 ((uint32_t)0x00000040) /*!< STM32 Low and Medium density devices: Write protection of page 24 to 27 */ -#define FLASH_WRProt_Pages28to31 ((uint32_t)0x00000080) /*!< STM32 Low and Medium density devices: Write protection of page 28 to 31 */ - -/* Values to be used with STM32 Medium-density devices */ -#define FLASH_WRProt_Pages32to35 ((uint32_t)0x00000100) /*!< STM32 Medium-density devices: Write protection of page 32 to 35 */ -#define FLASH_WRProt_Pages36to39 ((uint32_t)0x00000200) /*!< STM32 Medium-density devices: Write protection of page 36 to 39 */ -#define FLASH_WRProt_Pages40to43 ((uint32_t)0x00000400) /*!< STM32 Medium-density devices: Write protection of page 40 to 43 */ -#define FLASH_WRProt_Pages44to47 ((uint32_t)0x00000800) /*!< STM32 Medium-density devices: Write protection of page 44 to 47 */ -#define FLASH_WRProt_Pages48to51 ((uint32_t)0x00001000) /*!< STM32 Medium-density devices: Write protection of page 48 to 51 */ -#define FLASH_WRProt_Pages52to55 ((uint32_t)0x00002000) /*!< STM32 Medium-density devices: Write protection of page 52 to 55 */ -#define FLASH_WRProt_Pages56to59 ((uint32_t)0x00004000) /*!< STM32 Medium-density devices: Write protection of page 56 to 59 */ -#define FLASH_WRProt_Pages60to63 ((uint32_t)0x00008000) /*!< STM32 Medium-density devices: Write protection of page 60 to 63 */ -#define FLASH_WRProt_Pages64to67 ((uint32_t)0x00010000) /*!< STM32 Medium-density devices: Write protection of page 64 to 67 */ -#define FLASH_WRProt_Pages68to71 ((uint32_t)0x00020000) /*!< STM32 Medium-density devices: Write protection of page 68 to 71 */ -#define FLASH_WRProt_Pages72to75 ((uint32_t)0x00040000) /*!< STM32 Medium-density devices: Write protection of page 72 to 75 */ -#define FLASH_WRProt_Pages76to79 ((uint32_t)0x00080000) /*!< STM32 Medium-density devices: Write protection of page 76 to 79 */ -#define FLASH_WRProt_Pages80to83 ((uint32_t)0x00100000) /*!< STM32 Medium-density devices: Write protection of page 80 to 83 */ -#define FLASH_WRProt_Pages84to87 ((uint32_t)0x00200000) /*!< STM32 Medium-density devices: Write protection of page 84 to 87 */ -#define FLASH_WRProt_Pages88to91 ((uint32_t)0x00400000) /*!< STM32 Medium-density devices: Write protection of page 88 to 91 */ -#define FLASH_WRProt_Pages92to95 ((uint32_t)0x00800000) /*!< STM32 Medium-density devices: Write protection of page 92 to 95 */ -#define FLASH_WRProt_Pages96to99 ((uint32_t)0x01000000) /*!< STM32 Medium-density devices: Write protection of page 96 to 99 */ -#define FLASH_WRProt_Pages100to103 ((uint32_t)0x02000000) /*!< STM32 Medium-density devices: Write protection of page 100 to 103 */ -#define FLASH_WRProt_Pages104to107 ((uint32_t)0x04000000) /*!< STM32 Medium-density devices: Write protection of page 104 to 107 */ -#define FLASH_WRProt_Pages108to111 ((uint32_t)0x08000000) /*!< STM32 Medium-density devices: Write protection of page 108 to 111 */ -#define FLASH_WRProt_Pages112to115 ((uint32_t)0x10000000) /*!< STM32 Medium-density devices: Write protection of page 112 to 115 */ -#define FLASH_WRProt_Pages116to119 ((uint32_t)0x20000000) /*!< STM32 Medium-density devices: Write protection of page 115 to 119 */ -#define FLASH_WRProt_Pages120to123 ((uint32_t)0x40000000) /*!< STM32 Medium-density devices: Write protection of page 120 to 123 */ -#define FLASH_WRProt_Pages124to127 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 124 to 127 */ - -/* Values to be used with STM32 High-density and STM32F10X Connectivity line devices */ -#define FLASH_WRProt_Pages0to1 ((uint32_t)0x00000001) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 0 to 1 */ -#define FLASH_WRProt_Pages2to3 ((uint32_t)0x00000002) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 2 to 3 */ -#define FLASH_WRProt_Pages4to5 ((uint32_t)0x00000004) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 4 to 5 */ -#define FLASH_WRProt_Pages6to7 ((uint32_t)0x00000008) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 6 to 7 */ -#define FLASH_WRProt_Pages8to9 ((uint32_t)0x00000010) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 8 to 9 */ -#define FLASH_WRProt_Pages10to11 ((uint32_t)0x00000020) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 10 to 11 */ -#define FLASH_WRProt_Pages12to13 ((uint32_t)0x00000040) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 12 to 13 */ -#define FLASH_WRProt_Pages14to15 ((uint32_t)0x00000080) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 14 to 15 */ -#define FLASH_WRProt_Pages16to17 ((uint32_t)0x00000100) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 16 to 17 */ -#define FLASH_WRProt_Pages18to19 ((uint32_t)0x00000200) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 18 to 19 */ -#define FLASH_WRProt_Pages20to21 ((uint32_t)0x00000400) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 20 to 21 */ -#define FLASH_WRProt_Pages22to23 ((uint32_t)0x00000800) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 22 to 23 */ -#define FLASH_WRProt_Pages24to25 ((uint32_t)0x00001000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 24 to 25 */ -#define FLASH_WRProt_Pages26to27 ((uint32_t)0x00002000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 26 to 27 */ -#define FLASH_WRProt_Pages28to29 ((uint32_t)0x00004000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 28 to 29 */ -#define FLASH_WRProt_Pages30to31 ((uint32_t)0x00008000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 30 to 31 */ -#define FLASH_WRProt_Pages32to33 ((uint32_t)0x00010000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 32 to 33 */ -#define FLASH_WRProt_Pages34to35 ((uint32_t)0x00020000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 34 to 35 */ -#define FLASH_WRProt_Pages36to37 ((uint32_t)0x00040000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 36 to 37 */ -#define FLASH_WRProt_Pages38to39 ((uint32_t)0x00080000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 38 to 39 */ -#define FLASH_WRProt_Pages40to41 ((uint32_t)0x00100000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 40 to 41 */ -#define FLASH_WRProt_Pages42to43 ((uint32_t)0x00200000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 42 to 43 */ -#define FLASH_WRProt_Pages44to45 ((uint32_t)0x00400000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 44 to 45 */ -#define FLASH_WRProt_Pages46to47 ((uint32_t)0x00800000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 46 to 47 */ -#define FLASH_WRProt_Pages48to49 ((uint32_t)0x01000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 48 to 49 */ -#define FLASH_WRProt_Pages50to51 ((uint32_t)0x02000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 50 to 51 */ -#define FLASH_WRProt_Pages52to53 ((uint32_t)0x04000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 52 to 53 */ -#define FLASH_WRProt_Pages54to55 ((uint32_t)0x08000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 54 to 55 */ -#define FLASH_WRProt_Pages56to57 ((uint32_t)0x10000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 56 to 57 */ -#define FLASH_WRProt_Pages58to59 ((uint32_t)0x20000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 58 to 59 */ -#define FLASH_WRProt_Pages60to61 ((uint32_t)0x40000000) /*!< STM32 Medium-density and Connectivity line devices: - Write protection of page 60 to 61 */ -#define FLASH_WRProt_Pages62to127 ((uint32_t)0x80000000) /*!< STM32 Connectivity line devices: Write protection of page 62 to 127 */ -#define FLASH_WRProt_Pages62to255 ((uint32_t)0x80000000) /*!< STM32 Medium-density devices: Write protection of page 62 to 255 */ - -#define FLASH_WRProt_AllPages ((uint32_t)0xFFFFFFFF) /*!< Write protection of all Pages */ - -#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000)) - -#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0807FFFF)) - -#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) - -/** - * @} - */ - -/** @defgroup Option_Bytes_IWatchdog - * @{ - */ - -#define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) - -/** - * @} - */ - -/** @defgroup Option_Bytes_nRST_STOP - * @{ - */ - -#define OB_STOP_NoRST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST)) - -/** - * @} - */ - -/** @defgroup Option_Bytes_nRST_STDBY - * @{ - */ - -#define OB_STDBY_NoRST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST)) - -/** - * @} - */ - -/** @defgroup FLASH_Interrupts - * @{ - */ - -#define FLASH_IT_ERROR ((uint32_t)0x00000400) /*!< FPEC error interrupt source */ -#define FLASH_IT_EOP ((uint32_t)0x00001000) /*!< End of FLASH Operation Interrupt source */ -#define IS_FLASH_IT(IT) ((((IT) & (uint32_t)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000))) - -/** - * @} - */ - -/** @defgroup FLASH_Flags - * @{ - */ - -#define FLASH_FLAG_BSY ((uint32_t)0x00000001) /*!< FLASH Busy flag */ -#define FLASH_FLAG_EOP ((uint32_t)0x00000020) /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_PGERR ((uint32_t)0x00000004) /*!< FLASH Program error flag */ -#define FLASH_FLAG_WRPRTERR ((uint32_t)0x00000010) /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_OPTERR ((uint32_t)0x00000001) /*!< FLASH Option Byte error flag */ - -#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000)) -#define IS_FLASH_GET_FLAG(FLAG) (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \ - ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \ - ((FLAG) == FLASH_FLAG_OPTERR)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Exported_Functions - * @{ - */ - -void FLASH_SetLatency(uint32_t FLASH_Latency); -void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess); -void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer); -void FLASH_Unlock(void); -void FLASH_Lock(void); -FLASH_Status FLASH_ErasePage(uint32_t Page_Address); -FLASH_Status FLASH_EraseAllPages(void); -FLASH_Status FLASH_EraseOptionBytes(void); -FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data); -FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data); -FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data); -FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages); -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState); -FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY); -uint32_t FLASH_GetUserOptionByte(void); -uint32_t FLASH_GetWriteProtectionOptionByte(void); -FlagStatus FLASH_GetReadOutProtectionStatus(void); -FlagStatus FLASH_GetPrefetchBufferStatus(void); -void FLASH_ITConfig(uint16_t FLASH_IT, FunctionalState NewState); -FlagStatus FLASH_GetFlagStatus(uint16_t FLASH_FLAG); -void FLASH_ClearFlag(uint16_t FLASH_FLAG); -FLASH_Status FLASH_GetStatus(void); -FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_FLASH_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h deleted file mode 100644 index 1340e218a..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_fsmc.h +++ /dev/null @@ -1,716 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_fsmc.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the FSMC firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_FSMC_H -#define __STM32F10x_FSMC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup FSMC - * @{ - */ - -/** @defgroup FSMC_Exported_Types - * @{ - */ - -/** - * @brief Timing parameters For NOR/SRAM Banks - */ - -typedef struct -{ - uint32_t FSMC_AddressSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address setup time. - This parameter can be a value between 0 and 0xF. - @note: It is not used with synchronous NOR Flash memories. */ - - uint32_t FSMC_AddressHoldTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address hold time. - This parameter can be a value between 0 and 0xF. - @note: It is not used with synchronous NOR Flash memories.*/ - - uint32_t FSMC_DataSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the data setup time. - This parameter can be a value between 0 and 0xFF. - @note: It is used for SRAMs, ROMs and asynchronous multiplexed NOR Flash memories. */ - - uint32_t FSMC_BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure - the duration of the bus turnaround. - This parameter can be a value between 0 and 0xF. - @note: It is only used for multiplexed NOR Flash memories. */ - - uint32_t FSMC_CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of HCLK cycles. - This parameter can be a value between 1 and 0xF. - @note: This parameter is not used for asynchronous NOR Flash, SRAM or ROM accesses. */ - - uint32_t FSMC_DataLatency; /*!< Defines the number of memory clock cycles to issue - to the memory before getting the first data. - The value of this parameter depends on the memory type as shown below: - - It must be set to 0 in case of a CRAM - - It is don’t care in asynchronous NOR, SRAM or ROM accesses - - It may assume a value between 0 and 0xF in NOR Flash memories - with synchronous burst mode enable */ - - uint32_t FSMC_AccessMode; /*!< Specifies the asynchronous access mode. - This parameter can be a value of @ref FSMC_Access_Mode */ -}FSMC_NORSRAMTimingInitTypeDef; - -/** - * @brief FSMC NOR/SRAM Init structure definition - */ - -typedef struct -{ - uint32_t FSMC_Bank; /*!< Specifies the NOR/SRAM memory bank that will be used. - This parameter can be a value of @ref FSMC_NORSRAM_Bank */ - - uint32_t FSMC_DataAddressMux; /*!< Specifies whether the address and data values are - multiplexed on the databus or not. - This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ - - uint32_t FSMC_MemoryType; /*!< Specifies the type of external memory attached to - the corresponding memory bank. - This parameter can be a value of @ref FSMC_Memory_Type */ - - uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be a value of @ref FSMC_Data_Width */ - - uint32_t FSMC_BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, - valid only with synchronous burst Flash memories. - This parameter can be a value of @ref FSMC_Burst_Access_Mode */ - - uint32_t FSMC_WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing - the Flash memory in burst mode. - This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ - - uint32_t FSMC_WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash - memory, valid only when accessing Flash memories in burst mode. - This parameter can be a value of @ref FSMC_Wrap_Mode */ - - uint32_t FSMC_WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one - clock cycle before the wait state or during the wait state, - valid only when accessing memories in burst mode. - This parameter can be a value of @ref FSMC_Wait_Timing */ - - uint32_t FSMC_WriteOperation; /*!< Enables or disables the write operation in the selected bank by the FSMC. - This parameter can be a value of @ref FSMC_Write_Operation */ - - uint32_t FSMC_WaitSignal; /*!< Enables or disables the wait-state insertion via wait - signal, valid for Flash memory access in burst mode. - This parameter can be a value of @ref FSMC_Wait_Signal */ - - uint32_t FSMC_ExtendedMode; /*!< Enables or disables the extended mode. - This parameter can be a value of @ref FSMC_Extended_Mode */ - - uint32_t FSMC_WriteBurst; /*!< Enables or disables the write burst operation. - This parameter can be a value of @ref FSMC_Write_Burst */ - - FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct; /*!< Timing Parameters for write and read access if the ExtendedMode is not used*/ - - FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct; /*!< Timing Parameters for write access if the ExtendedMode is used*/ -}FSMC_NORSRAMInitTypeDef; - -/** - * @brief Timing parameters For FSMC NAND and PCCARD Banks - */ - -typedef struct -{ - uint32_t FSMC_SetupTime; /*!< Defines the number of HCLK cycles to setup address before - the command assertion for NAND-Flash read or write access - to common/Attribute or I/O memory space (depending on - the memory space timing to be configured). - This parameter can be a value between 0 and 0xFF.*/ - - uint32_t FSMC_WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the - command for NAND-Flash read or write access to - common/Attribute or I/O memory space (depending on the - memory space timing to be configured). - This parameter can be a number between 0x00 and 0xFF */ - - uint32_t FSMC_HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address - (and data for write access) after the command deassertion - for NAND-Flash read or write access to common/Attribute - or I/O memory space (depending on the memory space timing - to be configured). - This parameter can be a number between 0x00 and 0xFF */ - - uint32_t FSMC_HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the - databus is kept in HiZ after the start of a NAND-Flash - write access to common/Attribute or I/O memory space (depending - on the memory space timing to be configured). - This parameter can be a number between 0x00 and 0xFF */ -}FSMC_NAND_PCCARDTimingInitTypeDef; - -/** - * @brief FSMC NAND Init structure definition - */ - -typedef struct -{ - uint32_t FSMC_Bank; /*!< Specifies the NAND memory bank that will be used. - This parameter can be a value of @ref FSMC_NAND_Bank */ - - uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory Bank. - This parameter can be any value of @ref FSMC_Wait_feature */ - - uint32_t FSMC_MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be any value of @ref FSMC_Data_Width */ - - uint32_t FSMC_ECC; /*!< Enables or disables the ECC computation. - This parameter can be any value of @ref FSMC_ECC */ - - uint32_t FSMC_ECCPageSize; /*!< Defines the page size for the extended ECC. - This parameter can be any value of @ref FSMC_ECC_Page_Size */ - - uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between 0 and 0xFF. */ - - uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between 0x0 and 0xFF */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ -}FSMC_NANDInitTypeDef; - -/** - * @brief FSMC PCCARD Init structure definition - */ - -typedef struct -{ - uint32_t FSMC_Waitfeature; /*!< Enables or disables the Wait feature for the Memory Bank. - This parameter can be any value of @ref FSMC_Wait_feature */ - - uint32_t FSMC_TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between 0 and 0xFF. */ - - uint32_t FSMC_TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between 0x0 and 0xFF */ - - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_CommonSpaceTimingStruct; /*!< FSMC Common Space Timing */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_AttributeSpaceTimingStruct; /*!< FSMC Attribute Space Timing */ - - FSMC_NAND_PCCARDTimingInitTypeDef* FSMC_IOSpaceTimingStruct; /*!< FSMC IO Space Timing */ -}FSMC_PCCARDInitTypeDef; - -/** - * @} - */ - -/** @defgroup FSMC_Exported_Constants - * @{ - */ - -/** @defgroup FSMC_NORSRAM_Bank - * @{ - */ -#define FSMC_Bank1_NORSRAM1 ((uint32_t)0x00000000) -#define FSMC_Bank1_NORSRAM2 ((uint32_t)0x00000002) -#define FSMC_Bank1_NORSRAM3 ((uint32_t)0x00000004) -#define FSMC_Bank1_NORSRAM4 ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup FSMC_NAND_Bank - * @{ - */ -#define FSMC_Bank2_NAND ((uint32_t)0x00000010) -#define FSMC_Bank3_NAND ((uint32_t)0x00000100) -/** - * @} - */ - -/** @defgroup FSMC_PCCARD_Bank - * @{ - */ -#define FSMC_Bank4_PCCARD ((uint32_t)0x00001000) -/** - * @} - */ - -#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \ - ((BANK) == FSMC_Bank1_NORSRAM2) || \ - ((BANK) == FSMC_Bank1_NORSRAM3) || \ - ((BANK) == FSMC_Bank1_NORSRAM4)) - -#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND)) - -#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - -#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \ - ((BANK) == FSMC_Bank3_NAND) || \ - ((BANK) == FSMC_Bank4_PCCARD)) - -/** @defgroup NOR_SRAM_Controller - * @{ - */ - -/** @defgroup FSMC_Data_Address_Bus_Multiplexing - * @{ - */ - -#define FSMC_DataAddressMux_Disable ((uint32_t)0x00000000) -#define FSMC_DataAddressMux_Enable ((uint32_t)0x00000002) -#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \ - ((MUX) == FSMC_DataAddressMux_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Memory_Type - * @{ - */ - -#define FSMC_MemoryType_SRAM ((uint32_t)0x00000000) -#define FSMC_MemoryType_PSRAM ((uint32_t)0x00000004) -#define FSMC_MemoryType_NOR ((uint32_t)0x00000008) -#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \ - ((MEMORY) == FSMC_MemoryType_PSRAM)|| \ - ((MEMORY) == FSMC_MemoryType_NOR)) - -/** - * @} - */ - -/** @defgroup FSMC_Data_Width - * @{ - */ - -#define FSMC_MemoryDataWidth_8b ((uint32_t)0x00000000) -#define FSMC_MemoryDataWidth_16b ((uint32_t)0x00000010) -#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \ - ((WIDTH) == FSMC_MemoryDataWidth_16b)) - -/** - * @} - */ - -/** @defgroup FSMC_Burst_Access_Mode - * @{ - */ - -#define FSMC_BurstAccessMode_Disable ((uint32_t)0x00000000) -#define FSMC_BurstAccessMode_Enable ((uint32_t)0x00000100) -#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \ - ((STATE) == FSMC_BurstAccessMode_Enable)) -/** - * @} - */ - -/** @defgroup FSMC_Wait_Signal_Polarity - * @{ - */ - -#define FSMC_WaitSignalPolarity_Low ((uint32_t)0x00000000) -#define FSMC_WaitSignalPolarity_High ((uint32_t)0x00000200) -#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \ - ((POLARITY) == FSMC_WaitSignalPolarity_High)) - -/** - * @} - */ - -/** @defgroup FSMC_Wrap_Mode - * @{ - */ - -#define FSMC_WrapMode_Disable ((uint32_t)0x00000000) -#define FSMC_WrapMode_Enable ((uint32_t)0x00000400) -#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \ - ((MODE) == FSMC_WrapMode_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Timing - * @{ - */ - -#define FSMC_WaitSignalActive_BeforeWaitState ((uint32_t)0x00000000) -#define FSMC_WaitSignalActive_DuringWaitState ((uint32_t)0x00000800) -#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \ - ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState)) - -/** - * @} - */ - -/** @defgroup FSMC_Write_Operation - * @{ - */ - -#define FSMC_WriteOperation_Disable ((uint32_t)0x00000000) -#define FSMC_WriteOperation_Enable ((uint32_t)0x00001000) -#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \ - ((OPERATION) == FSMC_WriteOperation_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Signal - * @{ - */ - -#define FSMC_WaitSignal_Disable ((uint32_t)0x00000000) -#define FSMC_WaitSignal_Enable ((uint32_t)0x00002000) -#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \ - ((SIGNAL) == FSMC_WaitSignal_Enable)) -/** - * @} - */ - -/** @defgroup FSMC_Extended_Mode - * @{ - */ - -#define FSMC_ExtendedMode_Disable ((uint32_t)0x00000000) -#define FSMC_ExtendedMode_Enable ((uint32_t)0x00004000) - -#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \ - ((MODE) == FSMC_ExtendedMode_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_Write_Burst - * @{ - */ - -#define FSMC_WriteBurst_Disable ((uint32_t)0x00000000) -#define FSMC_WriteBurst_Enable ((uint32_t)0x00080000) -#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \ - ((BURST) == FSMC_WriteBurst_Enable)) -/** - * @} - */ - -/** @defgroup FSMC_Address_Setup_Time - * @{ - */ - -#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Address_Hold_Time - * @{ - */ - -#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Data_Setup_Time - * @{ - */ - -#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF)) - -/** - * @} - */ - -/** @defgroup FSMC_Bus_Turn_around_Duration - * @{ - */ - -#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_CLK_Division - * @{ - */ - -#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Data_Latency - * @{ - */ - -#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF) - -/** - * @} - */ - -/** @defgroup FSMC_Access_Mode - * @{ - */ - -#define FSMC_AccessMode_A ((uint32_t)0x00000000) -#define FSMC_AccessMode_B ((uint32_t)0x10000000) -#define FSMC_AccessMode_C ((uint32_t)0x20000000) -#define FSMC_AccessMode_D ((uint32_t)0x30000000) -#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \ - ((MODE) == FSMC_AccessMode_B) || \ - ((MODE) == FSMC_AccessMode_C) || \ - ((MODE) == FSMC_AccessMode_D)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup NAND_PCCARD_Controller - * @{ - */ - -/** @defgroup FSMC_Wait_feature - * @{ - */ - -#define FSMC_Waitfeature_Disable ((uint32_t)0x00000000) -#define FSMC_Waitfeature_Enable ((uint32_t)0x00000002) -#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \ - ((FEATURE) == FSMC_Waitfeature_Enable)) - -/** - * @} - */ - - -/** @defgroup FSMC_ECC - * @{ - */ - -#define FSMC_ECC_Disable ((uint32_t)0x00000000) -#define FSMC_ECC_Enable ((uint32_t)0x00000040) -#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \ - ((STATE) == FSMC_ECC_Enable)) - -/** - * @} - */ - -/** @defgroup FSMC_ECC_Page_Size - * @{ - */ - -#define FSMC_ECCPageSize_256Bytes ((uint32_t)0x00000000) -#define FSMC_ECCPageSize_512Bytes ((uint32_t)0x00020000) -#define FSMC_ECCPageSize_1024Bytes ((uint32_t)0x00040000) -#define FSMC_ECCPageSize_2048Bytes ((uint32_t)0x00060000) -#define FSMC_ECCPageSize_4096Bytes ((uint32_t)0x00080000) -#define FSMC_ECCPageSize_8192Bytes ((uint32_t)0x000A0000) -#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_512Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \ - ((SIZE) == FSMC_ECCPageSize_8192Bytes)) - -/** - * @} - */ - -/** @defgroup FSMC_TCLR_Setup_Time - * @{ - */ - -#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_TAR_Setup_Time - * @{ - */ - -#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Setup_Time - * @{ - */ - -#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Wait_Setup_Time - * @{ - */ - -#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Hold_Setup_Time - * @{ - */ - -#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_HiZ_Setup_Time - * @{ - */ - -#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF) - -/** - * @} - */ - -/** @defgroup FSMC_Interrupt_sources - * @{ - */ - -#define FSMC_IT_RisingEdge ((uint32_t)0x00000008) -#define FSMC_IT_Level ((uint32_t)0x00000010) -#define FSMC_IT_FallingEdge ((uint32_t)0x00000020) -#define IS_FSMC_IT(IT) ((((IT) & (uint32_t)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000)) -#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \ - ((IT) == FSMC_IT_Level) || \ - ((IT) == FSMC_IT_FallingEdge)) -/** - * @} - */ - -/** @defgroup FSMC_Flags - * @{ - */ - -#define FSMC_FLAG_RisingEdge ((uint32_t)0x00000001) -#define FSMC_FLAG_Level ((uint32_t)0x00000002) -#define FSMC_FLAG_FallingEdge ((uint32_t)0x00000004) -#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) -#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \ - ((FLAG) == FSMC_FLAG_Level) || \ - ((FLAG) == FSMC_FLAG_FallingEdge) || \ - ((FLAG) == FSMC_FLAG_FEMPT)) - -#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000)) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FSMC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup FSMC_Exported_Functions - * @{ - */ - -void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank); -void FSMC_NANDDeInit(uint32_t FSMC_Bank); -void FSMC_PCCARDDeInit(void); -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct); -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct); -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct); -void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState); -void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState); -void FSMC_PCCARDCmd(FunctionalState NewState); -void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState); -uint32_t FSMC_GetECC(uint32_t FSMC_Bank); -void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState); -FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); -void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG); -ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT); -void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_FSMC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h deleted file mode 100644 index 94f234d8d..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_gpio.h +++ /dev/null @@ -1,359 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_gpio.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the GPIO - * firmware library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_GPIO_H -#define __STM32F10x_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/** @defgroup GPIO_Exported_Types - * @{ - */ - -#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \ - ((PERIPH) == GPIOB) || \ - ((PERIPH) == GPIOC) || \ - ((PERIPH) == GPIOD) || \ - ((PERIPH) == GPIOE) || \ - ((PERIPH) == GPIOF) || \ - ((PERIPH) == GPIOG)) - -/** - * @brief Output Maximum frequency selection - */ - -typedef enum -{ - GPIO_Speed_10MHz = 1, - GPIO_Speed_2MHz, - GPIO_Speed_50MHz -}GPIOSpeed_TypeDef; -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \ - ((SPEED) == GPIO_Speed_50MHz)) - -/** - * @brief Configuration Mode enumeration - */ - -typedef enum -{ GPIO_Mode_AIN = 0x0, - GPIO_Mode_IN_FLOATING = 0x04, - GPIO_Mode_IPD = 0x28, - GPIO_Mode_IPU = 0x48, - GPIO_Mode_Out_OD = 0x14, - GPIO_Mode_Out_PP = 0x10, - GPIO_Mode_AF_OD = 0x1C, - GPIO_Mode_AF_PP = 0x18 -}GPIOMode_TypeDef; - -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \ - ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \ - ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \ - ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP)) - -/** - * @brief GPIO Init structure definition - */ - -typedef struct -{ - uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIOSpeed_TypeDef */ - - GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIOMode_TypeDef */ -}GPIO_InitTypeDef; - - -/** - * @brief Bit_SET and Bit_RESET enumeration - */ - -typedef enum -{ Bit_RESET = 0, - Bit_SET -}BitAction; - -#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET)) - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Constants - * @{ - */ - -/** @defgroup GPIO_pins_define - * @{ - */ - -#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */ -#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */ -#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */ -#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */ -#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */ -#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */ -#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */ -#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */ -#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */ -#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */ -#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */ -#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */ -#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */ -#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */ -#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */ -#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */ -#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */ - -#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00)) - -#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \ - ((PIN) == GPIO_Pin_1) || \ - ((PIN) == GPIO_Pin_2) || \ - ((PIN) == GPIO_Pin_3) || \ - ((PIN) == GPIO_Pin_4) || \ - ((PIN) == GPIO_Pin_5) || \ - ((PIN) == GPIO_Pin_6) || \ - ((PIN) == GPIO_Pin_7) || \ - ((PIN) == GPIO_Pin_8) || \ - ((PIN) == GPIO_Pin_9) || \ - ((PIN) == GPIO_Pin_10) || \ - ((PIN) == GPIO_Pin_11) || \ - ((PIN) == GPIO_Pin_12) || \ - ((PIN) == GPIO_Pin_13) || \ - ((PIN) == GPIO_Pin_14) || \ - ((PIN) == GPIO_Pin_15)) - -/** - * @} - */ - -/** @defgroup GPIO_Remap_define - * @{ - */ - -#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */ -#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */ -#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */ -#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */ -#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */ -#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */ -#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */ -#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */ -#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */ -#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */ -#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */ -#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */ -#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */ -#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */ -#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */ -#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */ -#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */ -#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */ -#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */ -#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */ -#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */ -#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */ -#define GPIO_Remap_SPI3 ((uint32_t)0x00201000) /*!< SPI3 Alternate Function mapping (only for Connectivity line devices) */ -#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected - to TIM2 Internal Trigger 1 for calibration - (only for Connectivity line devices) */ -#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */ - -#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \ - ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \ - ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \ - ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \ - ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \ - ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \ - ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \ - ((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \ - ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \ - ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \ - ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \ - ((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \ - ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \ - ((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \ - ((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS)) - -/** - * @} - */ - -/** @defgroup GPIO_Port_Sources - * @{ - */ - -#define GPIO_PortSourceGPIOA ((uint8_t)0x00) -#define GPIO_PortSourceGPIOB ((uint8_t)0x01) -#define GPIO_PortSourceGPIOC ((uint8_t)0x02) -#define GPIO_PortSourceGPIOD ((uint8_t)0x03) -#define GPIO_PortSourceGPIOE ((uint8_t)0x04) -#define GPIO_PortSourceGPIOF ((uint8_t)0x05) -#define GPIO_PortSourceGPIOG ((uint8_t)0x06) -#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE)) - -#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \ - ((PORTSOURCE) == GPIO_PortSourceGPIOG)) - -/** - * @} - */ - -/** @defgroup GPIO_Pin_sources - * @{ - */ - -#define GPIO_PinSource0 ((uint8_t)0x00) -#define GPIO_PinSource1 ((uint8_t)0x01) -#define GPIO_PinSource2 ((uint8_t)0x02) -#define GPIO_PinSource3 ((uint8_t)0x03) -#define GPIO_PinSource4 ((uint8_t)0x04) -#define GPIO_PinSource5 ((uint8_t)0x05) -#define GPIO_PinSource6 ((uint8_t)0x06) -#define GPIO_PinSource7 ((uint8_t)0x07) -#define GPIO_PinSource8 ((uint8_t)0x08) -#define GPIO_PinSource9 ((uint8_t)0x09) -#define GPIO_PinSource10 ((uint8_t)0x0A) -#define GPIO_PinSource11 ((uint8_t)0x0B) -#define GPIO_PinSource12 ((uint8_t)0x0C) -#define GPIO_PinSource13 ((uint8_t)0x0D) -#define GPIO_PinSource14 ((uint8_t)0x0E) -#define GPIO_PinSource15 ((uint8_t)0x0F) - -#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \ - ((PINSOURCE) == GPIO_PinSource1) || \ - ((PINSOURCE) == GPIO_PinSource2) || \ - ((PINSOURCE) == GPIO_PinSource3) || \ - ((PINSOURCE) == GPIO_PinSource4) || \ - ((PINSOURCE) == GPIO_PinSource5) || \ - ((PINSOURCE) == GPIO_PinSource6) || \ - ((PINSOURCE) == GPIO_PinSource7) || \ - ((PINSOURCE) == GPIO_PinSource8) || \ - ((PINSOURCE) == GPIO_PinSource9) || \ - ((PINSOURCE) == GPIO_PinSource10) || \ - ((PINSOURCE) == GPIO_PinSource11) || \ - ((PINSOURCE) == GPIO_PinSource12) || \ - ((PINSOURCE) == GPIO_PinSource13) || \ - ((PINSOURCE) == GPIO_PinSource14) || \ - ((PINSOURCE) == GPIO_PinSource15)) - -/** - * @} - */ - -/** @defgroup Ethernet_Media_Interface - * @{ - */ -#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000) -#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001) - -#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \ - ((INTERFACE) == GPIO_ETH_MediaInterface_RMII)) - -/** - * @} - */ -/** - * @} - */ - -/** @defgroup GPIO_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Exported_Functions - * @{ - */ - -void GPIO_DeInit(GPIO_TypeDef* GPIOx); -void GPIO_AFIODeInit(void); -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct); -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct); -uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx); -uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx); -void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal); -void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal); -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); -void GPIO_EventOutputCmd(FunctionalState NewState); -void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState); -void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource); -void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_GPIO_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h deleted file mode 100644 index 4da8ed30b..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_i2c.h +++ /dev/null @@ -1,472 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_i2c.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the I2C firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_I2C_H -#define __STM32F10x_I2C_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/** @defgroup I2C_Exported_Types - * @{ - */ - -/** - * @brief I2C Init structure definition - */ - -typedef struct -{ - uint32_t I2C_ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 400kHz */ - - uint16_t I2C_Mode; /*!< Specifies the I2C mode. - This parameter can be a value of @ref I2C_mode */ - - uint16_t I2C_DutyCycle; /*!< Specifies the I2C fast mode duty cycle. - This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ - - uint16_t I2C_OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint16_t I2C_Ack; /*!< Enables or disables the acknowledgement. - This parameter can be a value of @ref I2C_acknowledgement */ - - uint16_t I2C_AcknowledgedAddress; /*!< Specifies if 7-bit or 10-bit address is acknowledged. - This parameter can be a value of @ref I2C_acknowledged_address */ -}I2C_InitTypeDef; - -/** - * @} - */ - - -/** @defgroup I2C_Exported_Constants - * @{ - */ - -#define IS_I2C_ALL_PERIPH(PERIPH) (((PERIPH) == I2C1) || \ - ((PERIPH) == I2C2)) -/** @defgroup I2C_mode - * @{ - */ - -#define I2C_Mode_I2C ((uint16_t)0x0000) -#define I2C_Mode_SMBusDevice ((uint16_t)0x0002) -#define I2C_Mode_SMBusHost ((uint16_t)0x000A) -#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \ - ((MODE) == I2C_Mode_SMBusDevice) || \ - ((MODE) == I2C_Mode_SMBusHost)) -/** - * @} - */ - -/** @defgroup I2C_duty_cycle_in_fast_mode - * @{ - */ - -#define I2C_DutyCycle_16_9 ((uint16_t)0x4000) /*!< I2C fast mode Tlow/Thigh = 16/9 */ -#define I2C_DutyCycle_2 ((uint16_t)0xBFFF) /*!< I2C fast mode Tlow/Thigh = 2 */ -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \ - ((CYCLE) == I2C_DutyCycle_2)) -/** - * @} - */ - -/** @defgroup I2C_acknowledgement - * @{ - */ - -#define I2C_Ack_Enable ((uint16_t)0x0400) -#define I2C_Ack_Disable ((uint16_t)0x0000) -#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \ - ((STATE) == I2C_Ack_Disable)) -/** - * @} - */ - -/** @defgroup I2C_transfer_direction - * @{ - */ - -#define I2C_Direction_Transmitter ((uint8_t)0x00) -#define I2C_Direction_Receiver ((uint8_t)0x01) -#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \ - ((DIRECTION) == I2C_Direction_Receiver)) -/** - * @} - */ - -/** @defgroup I2C_acknowledged_address - * @{ - */ - -#define I2C_AcknowledgedAddress_7bit ((uint16_t)0x4000) -#define I2C_AcknowledgedAddress_10bit ((uint16_t)0xC000) -#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \ - ((ADDRESS) == I2C_AcknowledgedAddress_10bit)) -/** - * @} - */ - -/** @defgroup I2C_registers - * @{ - */ - -#define I2C_Register_CR1 ((uint8_t)0x00) -#define I2C_Register_CR2 ((uint8_t)0x04) -#define I2C_Register_OAR1 ((uint8_t)0x08) -#define I2C_Register_OAR2 ((uint8_t)0x0C) -#define I2C_Register_DR ((uint8_t)0x10) -#define I2C_Register_SR1 ((uint8_t)0x14) -#define I2C_Register_SR2 ((uint8_t)0x18) -#define I2C_Register_CCR ((uint8_t)0x1C) -#define I2C_Register_TRISE ((uint8_t)0x20) -#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \ - ((REGISTER) == I2C_Register_CR2) || \ - ((REGISTER) == I2C_Register_OAR1) || \ - ((REGISTER) == I2C_Register_OAR2) || \ - ((REGISTER) == I2C_Register_DR) || \ - ((REGISTER) == I2C_Register_SR1) || \ - ((REGISTER) == I2C_Register_SR2) || \ - ((REGISTER) == I2C_Register_CCR) || \ - ((REGISTER) == I2C_Register_TRISE)) -/** - * @} - */ - -/** @defgroup I2C_SMBus_alert_pin_level - * @{ - */ - -#define I2C_SMBusAlert_Low ((uint16_t)0x2000) -#define I2C_SMBusAlert_High ((uint16_t)0xDFFF) -#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \ - ((ALERT) == I2C_SMBusAlert_High)) -/** - * @} - */ - -/** @defgroup I2C_PEC_position - * @{ - */ - -#define I2C_PECPosition_Next ((uint16_t)0x0800) -#define I2C_PECPosition_Current ((uint16_t)0xF7FF) -#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \ - ((POSITION) == I2C_PECPosition_Current)) -/** - * @} - */ - -/** @defgroup I2C_interrupts_definition - * @{ - */ - -#define I2C_IT_BUF ((uint16_t)0x0400) -#define I2C_IT_EVT ((uint16_t)0x0200) -#define I2C_IT_ERR ((uint16_t)0x0100) -#define IS_I2C_CONFIG_IT(IT) ((((IT) & (uint16_t)0xF8FF) == 0x00) && ((IT) != 0x00)) -/** - * @} - */ - -/** @defgroup I2C_interrupts_definition - * @{ - */ - -#define I2C_IT_SMBALERT ((uint32_t)0x01008000) -#define I2C_IT_TIMEOUT ((uint32_t)0x01004000) -#define I2C_IT_PECERR ((uint32_t)0x01001000) -#define I2C_IT_OVR ((uint32_t)0x01000800) -#define I2C_IT_AF ((uint32_t)0x01000400) -#define I2C_IT_ARLO ((uint32_t)0x01000200) -#define I2C_IT_BERR ((uint32_t)0x01000100) -#define I2C_IT_TXE ((uint32_t)0x06000080) -#define I2C_IT_RXNE ((uint32_t)0x06000040) -#define I2C_IT_STOPF ((uint32_t)0x02000010) -#define I2C_IT_ADD10 ((uint32_t)0x02000008) -#define I2C_IT_BTF ((uint32_t)0x02000004) -#define I2C_IT_ADDR ((uint32_t)0x02000002) -#define I2C_IT_SB ((uint32_t)0x02000001) - -#define IS_I2C_CLEAR_IT(IT) ((((IT) & (uint16_t)0x20FF) == 0x00) && ((IT) != (uint16_t)0x00)) - -#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \ - ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \ - ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \ - ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \ - ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \ - ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \ - ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB)) -/** - * @} - */ - -/** @defgroup I2C_flags_definition - * @{ - */ - -/** - * @brief SR2 register flags - */ - -#define I2C_FLAG_DUALF ((uint32_t)0x00800000) -#define I2C_FLAG_SMBHOST ((uint32_t)0x00400000) -#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00200000) -#define I2C_FLAG_GENCALL ((uint32_t)0x00100000) -#define I2C_FLAG_TRA ((uint32_t)0x00040000) -#define I2C_FLAG_BUSY ((uint32_t)0x00020000) -#define I2C_FLAG_MSL ((uint32_t)0x00010000) - -/** - * @brief SR1 register flags - */ - -#define I2C_FLAG_SMBALERT ((uint32_t)0x10008000) -#define I2C_FLAG_TIMEOUT ((uint32_t)0x10004000) -#define I2C_FLAG_PECERR ((uint32_t)0x10001000) -#define I2C_FLAG_OVR ((uint32_t)0x10000800) -#define I2C_FLAG_AF ((uint32_t)0x10000400) -#define I2C_FLAG_ARLO ((uint32_t)0x10000200) -#define I2C_FLAG_BERR ((uint32_t)0x10000100) -#define I2C_FLAG_TXE ((uint32_t)0x10000080) -#define I2C_FLAG_RXNE ((uint32_t)0x10000040) -#define I2C_FLAG_STOPF ((uint32_t)0x10000010) -#define I2C_FLAG_ADD10 ((uint32_t)0x10000008) -#define I2C_FLAG_BTF ((uint32_t)0x10000004) -#define I2C_FLAG_ADDR ((uint32_t)0x10000002) -#define I2C_FLAG_SB ((uint32_t)0x10000001) - -#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0x20FF) == 0x00) && ((FLAG) != (uint16_t)0x00)) - -#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \ - ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \ - ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \ - ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \ - ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \ - ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \ - ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \ - ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \ - ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \ - ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \ - ((FLAG) == I2C_FLAG_SB)) -/** - * @} - */ - -/** @defgroup I2C_Events - * @{ - */ - -/** - * @brief EV1 - */ - -#define I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED ((uint32_t)0x00060082) /* TRA, BUSY, TXE and ADDR flags */ -#define I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED ((uint32_t)0x00020002) /* BUSY and ADDR flags */ -#define I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((uint32_t)0x00860080) /* DUALF, TRA, BUSY and TXE flags */ -#define I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED ((uint32_t)0x00820000) /* DUALF and BUSY flags */ -#define I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED ((uint32_t)0x00120000) /* GENCALL and BUSY flags */ - -/** - * @brief EV2 - */ - -#define I2C_EVENT_SLAVE_BYTE_RECEIVED ((uint32_t)0x00020040) /* BUSY and RXNE flags */ - -/** - * @brief EV3 - */ - -#define I2C_EVENT_SLAVE_BYTE_TRANSMITTED ((uint32_t)0x00060084) /* TRA, BUSY, TXE and BTF flags */ - -/** - * @brief EV4 - */ - -#define I2C_EVENT_SLAVE_STOP_DETECTED ((uint32_t)0x00000010) /* STOPF flag */ - -/** - * @brief EV5 - */ - -#define I2C_EVENT_MASTER_MODE_SELECT ((uint32_t)0x00030001) /* BUSY, MSL and SB flag */ - -/** - * @brief EV6 - */ - -#define I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED ((uint32_t)0x00070082) /* BUSY, MSL, ADDR, TXE and TRA flags */ -#define I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED ((uint32_t)0x00030002) /* BUSY, MSL and ADDR flags */ - -/** - * @brief EV7 - */ - -#define I2C_EVENT_MASTER_BYTE_RECEIVED ((uint32_t)0x00030040) /* BUSY, MSL and RXNE flags */ - -/** - * @brief EV8 - */ - -#define I2C_EVENT_MASTER_BYTE_TRANSMITTING ((uint32_t)0x00070080) /* TRA, BUSY, MSL, TXE flags */ - -/** - * @brief EV8_2 - */ - -#define I2C_EVENT_MASTER_BYTE_TRANSMITTED ((uint32_t)0x00070084) /* TRA, BUSY, MSL, TXE and BTF flags */ - -/** - * @brief EV9 - */ - -#define I2C_EVENT_MASTER_MODE_ADDRESS10 ((uint32_t)0x00030008) /* BUSY, MSL and ADD10 flags */ - -/** - * @brief EV3_2 - */ - -#define I2C_EVENT_SLAVE_ACK_FAILURE ((uint32_t)0x00000400) /* AF flag */ - -#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \ - ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \ - ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \ - ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \ - ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \ - ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \ - ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE)) -/** - * @} - */ - -/** @defgroup I2C_own_address1 - * @{ - */ - -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF) -/** - * @} - */ - -/** @defgroup I2C_clock_speed - * @{ - */ - -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup I2C_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Exported_Functions - * @{ - */ - -void I2C_DeInit(I2C_TypeDef* I2Cx); -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct); -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct); -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address); -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState); -void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data); -uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx); -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction); -uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register); -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert); -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition); -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState); -uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx); -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState); -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle); -uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx); -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT); -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); -void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG); -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT); -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_I2C_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h deleted file mode 100644 index d32fb0aae..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_iwdg.h +++ /dev/null @@ -1,139 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_iwdg.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the IWDG - * firmware library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IWDG_H -#define __STM32F10x_IWDG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup IWDG - * @{ - */ - -/** @defgroup IWDG_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Exported_Constants - * @{ - */ - -/** @defgroup IWDG_WriteAccess - * @{ - */ - -#define IWDG_WriteAccess_Enable ((uint16_t)0x5555) -#define IWDG_WriteAccess_Disable ((uint16_t)0x0000) -#define IS_IWDG_WRITE_ACCESS(ACCESS) (((ACCESS) == IWDG_WriteAccess_Enable) || \ - ((ACCESS) == IWDG_WriteAccess_Disable)) -/** - * @} - */ - -/** @defgroup IWDG_prescaler - * @{ - */ - -#define IWDG_Prescaler_4 ((uint8_t)0x00) -#define IWDG_Prescaler_8 ((uint8_t)0x01) -#define IWDG_Prescaler_16 ((uint8_t)0x02) -#define IWDG_Prescaler_32 ((uint8_t)0x03) -#define IWDG_Prescaler_64 ((uint8_t)0x04) -#define IWDG_Prescaler_128 ((uint8_t)0x05) -#define IWDG_Prescaler_256 ((uint8_t)0x06) -#define IS_IWDG_PRESCALER(PRESCALER) (((PRESCALER) == IWDG_Prescaler_4) || \ - ((PRESCALER) == IWDG_Prescaler_8) || \ - ((PRESCALER) == IWDG_Prescaler_16) || \ - ((PRESCALER) == IWDG_Prescaler_32) || \ - ((PRESCALER) == IWDG_Prescaler_64) || \ - ((PRESCALER) == IWDG_Prescaler_128)|| \ - ((PRESCALER) == IWDG_Prescaler_256)) -/** - * @} - */ - -/** @defgroup IWDG_Flag - * @{ - */ - -#define IWDG_FLAG_PVU ((uint16_t)0x0001) -#define IWDG_FLAG_RVU ((uint16_t)0x0002) -#define IS_IWDG_FLAG(FLAG) (((FLAG) == IWDG_FLAG_PVU) || ((FLAG) == IWDG_FLAG_RVU)) -#define IS_IWDG_RELOAD(RELOAD) ((RELOAD) <= 0xFFF) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup IWDG_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Exported_Functions - * @{ - */ - -void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess); -void IWDG_SetPrescaler(uint8_t IWDG_Prescaler); -void IWDG_SetReload(uint16_t Reload); -void IWDG_ReloadCounter(void); -void IWDG_Enable(void); -FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_IWDG_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h deleted file mode 100644 index e435ee3a6..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_pwr.h +++ /dev/null @@ -1,155 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_pwr.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the PWR firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_PWR_H -#define __STM32F10x_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/** @defgroup PWR_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Exported_Constants - * @{ - */ - -/** @defgroup PVD_detection_level - * @{ - */ - -#define PWR_PVDLevel_2V2 ((uint32_t)0x00000000) -#define PWR_PVDLevel_2V3 ((uint32_t)0x00000020) -#define PWR_PVDLevel_2V4 ((uint32_t)0x00000040) -#define PWR_PVDLevel_2V5 ((uint32_t)0x00000060) -#define PWR_PVDLevel_2V6 ((uint32_t)0x00000080) -#define PWR_PVDLevel_2V7 ((uint32_t)0x000000A0) -#define PWR_PVDLevel_2V8 ((uint32_t)0x000000C0) -#define PWR_PVDLevel_2V9 ((uint32_t)0x000000E0) -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLevel_2V2) || ((LEVEL) == PWR_PVDLevel_2V3)|| \ - ((LEVEL) == PWR_PVDLevel_2V4) || ((LEVEL) == PWR_PVDLevel_2V5)|| \ - ((LEVEL) == PWR_PVDLevel_2V6) || ((LEVEL) == PWR_PVDLevel_2V7)|| \ - ((LEVEL) == PWR_PVDLevel_2V8) || ((LEVEL) == PWR_PVDLevel_2V9)) -/** - * @} - */ - -/** @defgroup Regulator_state_is_STOP_mode - * @{ - */ - -#define PWR_Regulator_ON ((uint32_t)0x00000000) -#define PWR_Regulator_LowPower ((uint32_t)0x00000001) -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_Regulator_ON) || \ - ((REGULATOR) == PWR_Regulator_LowPower)) -/** - * @} - */ - -/** @defgroup STOP_mode_entry - * @{ - */ - -#define PWR_STOPEntry_WFI ((uint8_t)0x01) -#define PWR_STOPEntry_WFE ((uint8_t)0x02) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPEntry_WFI) || ((ENTRY) == PWR_STOPEntry_WFE)) - -/** - * @} - */ - -/** @defgroup PWR_Flag - * @{ - */ - -#define PWR_FLAG_WU ((uint32_t)0x00000001) -#define PWR_FLAG_SB ((uint32_t)0x00000002) -#define PWR_FLAG_PVDO ((uint32_t)0x00000004) -#define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ - ((FLAG) == PWR_FLAG_PVDO)) - -#define IS_PWR_CLEAR_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup PWR_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Exported_Functions - * @{ - */ - -void PWR_DeInit(void); -void PWR_BackupAccessCmd(FunctionalState NewState); -void PWR_PVDCmd(FunctionalState NewState); -void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel); -void PWR_WakeUpPinCmd(FunctionalState NewState); -void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry); -void PWR_EnterSTANDBYMode(void); -FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG); -void PWR_ClearFlag(uint32_t PWR_FLAG); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_PWR_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h deleted file mode 100644 index c2a0339ca..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rcc.h +++ /dev/null @@ -1,700 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rcc.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the RCC firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RCC_H -#define __STM32F10x_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/** @defgroup RCC_Exported_Types - * @{ - */ - -typedef struct -{ - uint32_t SYSCLK_Frequency; /*!< returns SYSCLK clock frequency expressed in Hz */ - uint32_t HCLK_Frequency; /*!< returns HCLK clock frequency expressed in Hz */ - uint32_t PCLK1_Frequency; /*!< returns PCLK1 clock frequency expressed in Hz */ - uint32_t PCLK2_Frequency; /*!< returns PCLK2 clock frequency expressed in Hz */ - uint32_t ADCCLK_Frequency; /*!< returns ADCCLK clock frequency expressed in Hz */ -}RCC_ClocksTypeDef; - -/** - * @} - */ - -/** @defgroup RCC_Exported_Constants - * @{ - */ - -/** @defgroup HSE_configuration - * @{ - */ - -#define RCC_HSE_OFF ((uint32_t)0x00000000) -#define RCC_HSE_ON ((uint32_t)0x00010000) -#define RCC_HSE_Bypass ((uint32_t)0x00040000) -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_Bypass)) - -/** - * @} - */ - -/** @defgroup PLL_entry_clock_source - * @{ - */ - -#define RCC_PLLSource_HSI_Div2 ((uint32_t)0x00000000) - -#ifndef STM32F10X_CL - #define RCC_PLLSource_HSE_Div1 ((uint32_t)0x00010000) - #define RCC_PLLSource_HSE_Div2 ((uint32_t)0x00030000) - #define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div1) || \ - ((SOURCE) == RCC_PLLSource_HSE_Div2)) -#else - #define RCC_PLLSource_PREDIV1 ((uint32_t)0x00010000) -#define IS_RCC_PLL_SOURCE(SOURCE) (((SOURCE) == RCC_PLLSource_HSI_Div2) || \ - ((SOURCE) == RCC_PLLSource_PREDIV1)) -#endif /* STM32F10X_CL */ - -/** - * @} - */ - -/** @defgroup PLL_multiplication_factor - * @{ - */ -#ifndef STM32F10X_CL - #define RCC_PLLMul_2 ((uint32_t)0x00000000) - #define RCC_PLLMul_3 ((uint32_t)0x00040000) - #define RCC_PLLMul_4 ((uint32_t)0x00080000) - #define RCC_PLLMul_5 ((uint32_t)0x000C0000) - #define RCC_PLLMul_6 ((uint32_t)0x00100000) - #define RCC_PLLMul_7 ((uint32_t)0x00140000) - #define RCC_PLLMul_8 ((uint32_t)0x00180000) - #define RCC_PLLMul_9 ((uint32_t)0x001C0000) - #define RCC_PLLMul_10 ((uint32_t)0x00200000) - #define RCC_PLLMul_11 ((uint32_t)0x00240000) - #define RCC_PLLMul_12 ((uint32_t)0x00280000) - #define RCC_PLLMul_13 ((uint32_t)0x002C0000) - #define RCC_PLLMul_14 ((uint32_t)0x00300000) - #define RCC_PLLMul_15 ((uint32_t)0x00340000) - #define RCC_PLLMul_16 ((uint32_t)0x00380000) - #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_2) || ((MUL) == RCC_PLLMul_3) || \ - ((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ - ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ - ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ - ((MUL) == RCC_PLLMul_10) || ((MUL) == RCC_PLLMul_11) || \ - ((MUL) == RCC_PLLMul_12) || ((MUL) == RCC_PLLMul_13) || \ - ((MUL) == RCC_PLLMul_14) || ((MUL) == RCC_PLLMul_15) || \ - ((MUL) == RCC_PLLMul_16)) - -#else - #define RCC_PLLMul_4 ((uint32_t)0x00080000) - #define RCC_PLLMul_5 ((uint32_t)0x000C0000) - #define RCC_PLLMul_6 ((uint32_t)0x00100000) - #define RCC_PLLMul_7 ((uint32_t)0x00140000) - #define RCC_PLLMul_8 ((uint32_t)0x00180000) - #define RCC_PLLMul_9 ((uint32_t)0x001C0000) - #define RCC_PLLMul_6_5 ((uint32_t)0x00340000) - - #define IS_RCC_PLL_MUL(MUL) (((MUL) == RCC_PLLMul_4) || ((MUL) == RCC_PLLMul_5) || \ - ((MUL) == RCC_PLLMul_6) || ((MUL) == RCC_PLLMul_7) || \ - ((MUL) == RCC_PLLMul_8) || ((MUL) == RCC_PLLMul_9) || \ - ((MUL) == RCC_PLLMul_6_5)) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -#ifdef STM32F10X_CL -/** @defgroup PREDIV1_division_factor - * @{ - */ - #define RCC_PREDIV1_Div1 ((uint32_t)0x00000000) - #define RCC_PREDIV1_Div2 ((uint32_t)0x00000001) - #define RCC_PREDIV1_Div3 ((uint32_t)0x00000002) - #define RCC_PREDIV1_Div4 ((uint32_t)0x00000003) - #define RCC_PREDIV1_Div5 ((uint32_t)0x00000004) - #define RCC_PREDIV1_Div6 ((uint32_t)0x00000005) - #define RCC_PREDIV1_Div7 ((uint32_t)0x00000006) - #define RCC_PREDIV1_Div8 ((uint32_t)0x00000007) - #define RCC_PREDIV1_Div9 ((uint32_t)0x00000008) - #define RCC_PREDIV1_Div10 ((uint32_t)0x00000009) - #define RCC_PREDIV1_Div11 ((uint32_t)0x0000000A) - #define RCC_PREDIV1_Div12 ((uint32_t)0x0000000B) - #define RCC_PREDIV1_Div13 ((uint32_t)0x0000000C) - #define RCC_PREDIV1_Div14 ((uint32_t)0x0000000D) - #define RCC_PREDIV1_Div15 ((uint32_t)0x0000000E) - #define RCC_PREDIV1_Div16 ((uint32_t)0x0000000F) - - #define IS_RCC_PREDIV1(PREDIV1) (((PREDIV1) == RCC_PREDIV1_Div1) || ((PREDIV1) == RCC_PREDIV1_Div2) || \ - ((PREDIV1) == RCC_PREDIV1_Div3) || ((PREDIV1) == RCC_PREDIV1_Div4) || \ - ((PREDIV1) == RCC_PREDIV1_Div5) || ((PREDIV1) == RCC_PREDIV1_Div6) || \ - ((PREDIV1) == RCC_PREDIV1_Div7) || ((PREDIV1) == RCC_PREDIV1_Div8) || \ - ((PREDIV1) == RCC_PREDIV1_Div9) || ((PREDIV1) == RCC_PREDIV1_Div10) || \ - ((PREDIV1) == RCC_PREDIV1_Div11) || ((PREDIV1) == RCC_PREDIV1_Div12) || \ - ((PREDIV1) == RCC_PREDIV1_Div13) || ((PREDIV1) == RCC_PREDIV1_Div14) || \ - ((PREDIV1) == RCC_PREDIV1_Div15) || ((PREDIV1) == RCC_PREDIV1_Div16)) -/** - * @} - */ - - -/** @defgroup PREDIV1_clock_source - * @{ - */ -/* PREDIV1 clock source (only for STM32 connectivity line devices) */ - #define RCC_PREDIV1_Source_HSE ((uint32_t)0x00000000) - #define RCC_PREDIV1_Source_PLL2 ((uint32_t)0x00010000) - - #define IS_RCC_PREDIV1_SOURCE(SOURCE) (((SOURCE) == RCC_PREDIV1_Source_HSE) || \ - ((SOURCE) == RCC_PREDIV1_Source_PLL2)) -/** - * @} - */ - - -/** @defgroup PREDIV2_division_factor - * @{ - */ - - #define RCC_PREDIV2_Div1 ((uint32_t)0x00000000) - #define RCC_PREDIV2_Div2 ((uint32_t)0x00000010) - #define RCC_PREDIV2_Div3 ((uint32_t)0x00000020) - #define RCC_PREDIV2_Div4 ((uint32_t)0x00000030) - #define RCC_PREDIV2_Div5 ((uint32_t)0x00000040) - #define RCC_PREDIV2_Div6 ((uint32_t)0x00000050) - #define RCC_PREDIV2_Div7 ((uint32_t)0x00000060) - #define RCC_PREDIV2_Div8 ((uint32_t)0x00000070) - #define RCC_PREDIV2_Div9 ((uint32_t)0x00000080) - #define RCC_PREDIV2_Div10 ((uint32_t)0x00000090) - #define RCC_PREDIV2_Div11 ((uint32_t)0x000000A0) - #define RCC_PREDIV2_Div12 ((uint32_t)0x000000B0) - #define RCC_PREDIV2_Div13 ((uint32_t)0x000000C0) - #define RCC_PREDIV2_Div14 ((uint32_t)0x000000D0) - #define RCC_PREDIV2_Div15 ((uint32_t)0x000000E0) - #define RCC_PREDIV2_Div16 ((uint32_t)0x000000F0) - - #define IS_RCC_PREDIV2(PREDIV2) (((PREDIV2) == RCC_PREDIV2_Div1) || ((PREDIV2) == RCC_PREDIV2_Div2) || \ - ((PREDIV2) == RCC_PREDIV2_Div3) || ((PREDIV2) == RCC_PREDIV2_Div4) || \ - ((PREDIV2) == RCC_PREDIV2_Div5) || ((PREDIV2) == RCC_PREDIV2_Div6) || \ - ((PREDIV2) == RCC_PREDIV2_Div7) || ((PREDIV2) == RCC_PREDIV2_Div8) || \ - ((PREDIV2) == RCC_PREDIV2_Div9) || ((PREDIV2) == RCC_PREDIV2_Div10) || \ - ((PREDIV2) == RCC_PREDIV2_Div11) || ((PREDIV2) == RCC_PREDIV2_Div12) || \ - ((PREDIV2) == RCC_PREDIV2_Div13) || ((PREDIV2) == RCC_PREDIV2_Div14) || \ - ((PREDIV2) == RCC_PREDIV2_Div15) || ((PREDIV2) == RCC_PREDIV2_Div16)) -/** - * @} - */ - - -/** @defgroup PLL2_multiplication_factor - * @{ - */ - - #define RCC_PLL2Mul_8 ((uint32_t)0x00000600) - #define RCC_PLL2Mul_9 ((uint32_t)0x00000700) - #define RCC_PLL2Mul_10 ((uint32_t)0x00000800) - #define RCC_PLL2Mul_11 ((uint32_t)0x00000900) - #define RCC_PLL2Mul_12 ((uint32_t)0x00000A00) - #define RCC_PLL2Mul_13 ((uint32_t)0x00000B00) - #define RCC_PLL2Mul_14 ((uint32_t)0x00000C00) - #define RCC_PLL2Mul_16 ((uint32_t)0x00000E00) - #define RCC_PLL2Mul_20 ((uint32_t)0x00000F00) - - #define IS_RCC_PLL2_MUL(MUL) (((MUL) == RCC_PLL2Mul_8) || ((MUL) == RCC_PLL2Mul_9) || \ - ((MUL) == RCC_PLL2Mul_10) || ((MUL) == RCC_PLL2Mul_11) || \ - ((MUL) == RCC_PLL2Mul_12) || ((MUL) == RCC_PLL2Mul_13) || \ - ((MUL) == RCC_PLL2Mul_14) || ((MUL) == RCC_PLL2Mul_16) || \ - ((MUL) == RCC_PLL2Mul_20)) -/** - * @} - */ - - -/** @defgroup PLL3_multiplication_factor - * @{ - */ - - #define RCC_PLL3Mul_8 ((uint32_t)0x00006000) - #define RCC_PLL3Mul_9 ((uint32_t)0x00007000) - #define RCC_PLL3Mul_10 ((uint32_t)0x00008000) - #define RCC_PLL3Mul_11 ((uint32_t)0x00009000) - #define RCC_PLL3Mul_12 ((uint32_t)0x0000A000) - #define RCC_PLL3Mul_13 ((uint32_t)0x0000B000) - #define RCC_PLL3Mul_14 ((uint32_t)0x0000C000) - #define RCC_PLL3Mul_16 ((uint32_t)0x0000E000) - #define RCC_PLL3Mul_20 ((uint32_t)0x0000F000) - - #define IS_RCC_PLL3_MUL(MUL) (((MUL) == RCC_PLL3Mul_8) || ((MUL) == RCC_PLL3Mul_9) || \ - ((MUL) == RCC_PLL3Mul_10) || ((MUL) == RCC_PLL3Mul_11) || \ - ((MUL) == RCC_PLL3Mul_12) || ((MUL) == RCC_PLL3Mul_13) || \ - ((MUL) == RCC_PLL3Mul_14) || ((MUL) == RCC_PLL3Mul_16) || \ - ((MUL) == RCC_PLL3Mul_20)) -/** - * @} - */ - -#endif /* STM32F10X_CL */ - - -/** @defgroup System_clock_source - * @{ - */ - -#define RCC_SYSCLKSource_HSI ((uint32_t)0x00000000) -#define RCC_SYSCLKSource_HSE ((uint32_t)0x00000001) -#define RCC_SYSCLKSource_PLLCLK ((uint32_t)0x00000002) -#define IS_RCC_SYSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSource_HSI) || \ - ((SOURCE) == RCC_SYSCLKSource_HSE) || \ - ((SOURCE) == RCC_SYSCLKSource_PLLCLK)) -/** - * @} - */ - -/** @defgroup AHB_clock_source - * @{ - */ - -#define RCC_SYSCLK_Div1 ((uint32_t)0x00000000) -#define RCC_SYSCLK_Div2 ((uint32_t)0x00000080) -#define RCC_SYSCLK_Div4 ((uint32_t)0x00000090) -#define RCC_SYSCLK_Div8 ((uint32_t)0x000000A0) -#define RCC_SYSCLK_Div16 ((uint32_t)0x000000B0) -#define RCC_SYSCLK_Div64 ((uint32_t)0x000000C0) -#define RCC_SYSCLK_Div128 ((uint32_t)0x000000D0) -#define RCC_SYSCLK_Div256 ((uint32_t)0x000000E0) -#define RCC_SYSCLK_Div512 ((uint32_t)0x000000F0) -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_Div1) || ((HCLK) == RCC_SYSCLK_Div2) || \ - ((HCLK) == RCC_SYSCLK_Div4) || ((HCLK) == RCC_SYSCLK_Div8) || \ - ((HCLK) == RCC_SYSCLK_Div16) || ((HCLK) == RCC_SYSCLK_Div64) || \ - ((HCLK) == RCC_SYSCLK_Div128) || ((HCLK) == RCC_SYSCLK_Div256) || \ - ((HCLK) == RCC_SYSCLK_Div512)) -/** - * @} - */ - -/** @defgroup APB1_APB2_clock_source - * @{ - */ - -#define RCC_HCLK_Div1 ((uint32_t)0x00000000) -#define RCC_HCLK_Div2 ((uint32_t)0x00000400) -#define RCC_HCLK_Div4 ((uint32_t)0x00000500) -#define RCC_HCLK_Div8 ((uint32_t)0x00000600) -#define RCC_HCLK_Div16 ((uint32_t)0x00000700) -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_Div1) || ((PCLK) == RCC_HCLK_Div2) || \ - ((PCLK) == RCC_HCLK_Div4) || ((PCLK) == RCC_HCLK_Div8) || \ - ((PCLK) == RCC_HCLK_Div16)) -/** - * @} - */ - -/** @defgroup RCC_Interrupt_source - * @{ - */ - -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_CSS ((uint8_t)0x80) - -#ifndef STM32F10X_CL - #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0xE0) == 0x00) && ((IT) != 0x00)) - #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS)) - #define IS_RCC_CLEAR_IT(IT) ((((IT) & (uint8_t)0x60) == 0x00) && ((IT) != 0x00)) -#else - #define RCC_IT_PLL2RDY ((uint8_t)0x20) - #define RCC_IT_PLL3RDY ((uint8_t)0x40) - #define IS_RCC_IT(IT) ((((IT) & (uint8_t)0x80) == 0x00) && ((IT) != 0x00)) - #define IS_RCC_GET_IT(IT) (((IT) == RCC_IT_LSIRDY) || ((IT) == RCC_IT_LSERDY) || \ - ((IT) == RCC_IT_HSIRDY) || ((IT) == RCC_IT_HSERDY) || \ - ((IT) == RCC_IT_PLLRDY) || ((IT) == RCC_IT_CSS) || \ - ((IT) == RCC_IT_PLL2RDY) || ((IT) == RCC_IT_PLL3RDY)) - #define IS_RCC_CLEAR_IT(IT) ((IT) != 0x00) -#endif /* STM32F10X_CL */ - - -/** - * @} - */ - -#ifndef STM32F10X_CL -/** @defgroup USB_Device_clock_source - * @{ - */ - - #define RCC_USBCLKSource_PLLCLK_1Div5 ((uint8_t)0x00) - #define RCC_USBCLKSource_PLLCLK_Div1 ((uint8_t)0x01) - - #define IS_RCC_USBCLK_SOURCE(SOURCE) (((SOURCE) == RCC_USBCLKSource_PLLCLK_1Div5) || \ - ((SOURCE) == RCC_USBCLKSource_PLLCLK_Div1)) -#else -/** @defgroup USB_OTG_FS_clock_source - * @{ - */ - #define RCC_OTGFSCLKSource_PLLVCO_Div3 ((uint8_t)0x00) - #define RCC_OTGFSCLKSource_PLLVCO_Div2 ((uint8_t)0x01) - - #define IS_RCC_OTGFSCLK_SOURCE(SOURCE) (((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div3) || \ - ((SOURCE) == RCC_OTGFSCLKSource_PLLVCO_Div2)) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -#ifdef STM32F10X_CL -/** @defgroup I2S2_clock_source - * @{ - */ - #define RCC_I2S2CLKSource_SYSCLK ((uint8_t)0x00) - #define RCC_I2S2CLKSource_PLL3_VCO ((uint8_t)0x01) - - #define IS_RCC_I2S2CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S2CLKSource_SYSCLK) || \ - ((SOURCE) == RCC_I2S2CLKSource_PLL3_VCO)) -/** - * @} - */ - -/** @defgroup I2S3_clock_source - * @{ - */ - #define RCC_I2S3CLKSource_SYSCLK ((uint8_t)0x00) - #define RCC_I2S3CLKSource_PLL3_VCO ((uint8_t)0x01) - - #define IS_RCC_I2S3CLK_SOURCE(SOURCE) (((SOURCE) == RCC_I2S3CLKSource_SYSCLK) || \ - ((SOURCE) == RCC_I2S3CLKSource_PLL3_VCO)) -/** - * @} - */ -#endif /* STM32F10X_CL */ - - -/** @defgroup ADC_clock_source - * @{ - */ - -#define RCC_PCLK2_Div2 ((uint32_t)0x00000000) -#define RCC_PCLK2_Div4 ((uint32_t)0x00004000) -#define RCC_PCLK2_Div6 ((uint32_t)0x00008000) -#define RCC_PCLK2_Div8 ((uint32_t)0x0000C000) -#define IS_RCC_ADCCLK(ADCCLK) (((ADCCLK) == RCC_PCLK2_Div2) || ((ADCCLK) == RCC_PCLK2_Div4) || \ - ((ADCCLK) == RCC_PCLK2_Div6) || ((ADCCLK) == RCC_PCLK2_Div8)) -/** - * @} - */ - -/** @defgroup LSE_configuration - * @{ - */ - -#define RCC_LSE_OFF ((uint8_t)0x00) -#define RCC_LSE_ON ((uint8_t)0x01) -#define RCC_LSE_Bypass ((uint8_t)0x04) -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_Bypass)) -/** - * @} - */ - -/** @defgroup RTC_clock_source - * @{ - */ - -#define RCC_RTCCLKSource_LSE ((uint32_t)0x00000100) -#define RCC_RTCCLKSource_LSI ((uint32_t)0x00000200) -#define RCC_RTCCLKSource_HSE_Div128 ((uint32_t)0x00000300) -#define IS_RCC_RTCCLK_SOURCE(SOURCE) (((SOURCE) == RCC_RTCCLKSource_LSE) || \ - ((SOURCE) == RCC_RTCCLKSource_LSI) || \ - ((SOURCE) == RCC_RTCCLKSource_HSE_Div128)) -/** - * @} - */ - -/** @defgroup AHB_peripheral - * @{ - */ - -#define RCC_AHBPeriph_DMA1 ((uint32_t)0x00000001) -#define RCC_AHBPeriph_DMA2 ((uint32_t)0x00000002) -#define RCC_AHBPeriph_SRAM ((uint32_t)0x00000004) -#define RCC_AHBPeriph_FLITF ((uint32_t)0x00000010) -#define RCC_AHBPeriph_CRC ((uint32_t)0x00000040) - -#ifndef STM32F10X_CL - #define RCC_AHBPeriph_FSMC ((uint32_t)0x00000100) - #define RCC_AHBPeriph_SDIO ((uint32_t)0x00000400) - #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFAA8) == 0x00) && ((PERIPH) != 0x00)) -#else - #define RCC_AHBPeriph_OTG_FS ((uint32_t)0x00001000) - #define RCC_AHBPeriph_ETH_MAC ((uint32_t)0x00004000) - #define RCC_AHBPeriph_ETH_MAC_Tx ((uint32_t)0x00008000) - #define RCC_AHBPeriph_ETH_MAC_Rx ((uint32_t)0x00010000) - - #define IS_RCC_AHB_PERIPH(PERIPH) ((((PERIPH) & 0xFFFE2FA8) == 0x00) && ((PERIPH) != 0x00)) - #define IS_RCC_AHB_PERIPH_RESET(PERIPH) ((((PERIPH) & 0xFFFFAFFF) == 0x00) && ((PERIPH) != 0x00)) -#endif /* STM32F10X_CL */ -/** - * @} - */ - -/** @defgroup APB2_peripheral - * @{ - */ - -#define RCC_APB2Periph_AFIO ((uint32_t)0x00000001) -#define RCC_APB2Periph_GPIOA ((uint32_t)0x00000004) -#define RCC_APB2Periph_GPIOB ((uint32_t)0x00000008) -#define RCC_APB2Periph_GPIOC ((uint32_t)0x00000010) -#define RCC_APB2Periph_GPIOD ((uint32_t)0x00000020) -#define RCC_APB2Periph_GPIOE ((uint32_t)0x00000040) -#define RCC_APB2Periph_GPIOF ((uint32_t)0x00000080) -#define RCC_APB2Periph_GPIOG ((uint32_t)0x00000100) -#define RCC_APB2Periph_ADC1 ((uint32_t)0x00000200) -#define RCC_APB2Periph_ADC2 ((uint32_t)0x00000400) -#define RCC_APB2Periph_TIM1 ((uint32_t)0x00000800) -#define RCC_APB2Periph_SPI1 ((uint32_t)0x00001000) -#define RCC_APB2Periph_TIM8 ((uint32_t)0x00002000) -#define RCC_APB2Periph_USART1 ((uint32_t)0x00004000) -#define RCC_APB2Periph_ADC3 ((uint32_t)0x00008000) - -#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFFF0002) == 0x00) && ((PERIPH) != 0x00)) -/** - * @} - */ - -/** @defgroup APB1_peripheral - * @{ - */ - -#define RCC_APB1Periph_TIM2 ((uint32_t)0x00000001) -#define RCC_APB1Periph_TIM3 ((uint32_t)0x00000002) -#define RCC_APB1Periph_TIM4 ((uint32_t)0x00000004) -#define RCC_APB1Periph_TIM5 ((uint32_t)0x00000008) -#define RCC_APB1Periph_TIM6 ((uint32_t)0x00000010) -#define RCC_APB1Periph_TIM7 ((uint32_t)0x00000020) -#define RCC_APB1Periph_WWDG ((uint32_t)0x00000800) -#define RCC_APB1Periph_SPI2 ((uint32_t)0x00004000) -#define RCC_APB1Periph_SPI3 ((uint32_t)0x00008000) -#define RCC_APB1Periph_USART2 ((uint32_t)0x00020000) -#define RCC_APB1Periph_USART3 ((uint32_t)0x00040000) -#define RCC_APB1Periph_UART4 ((uint32_t)0x00080000) -#define RCC_APB1Periph_UART5 ((uint32_t)0x00100000) -#define RCC_APB1Periph_I2C1 ((uint32_t)0x00200000) -#define RCC_APB1Periph_I2C2 ((uint32_t)0x00400000) -#define RCC_APB1Periph_USB ((uint32_t)0x00800000) -#define RCC_APB1Periph_CAN1 ((uint32_t)0x02000000) -#define RCC_APB1Periph_BKP ((uint32_t)0x08000000) -#define RCC_APB1Periph_PWR ((uint32_t)0x10000000) -#define RCC_APB1Periph_DAC ((uint32_t)0x20000000) -#define RCC_APB1Periph_CAN2 ((uint32_t)0x04000000) -#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0xC10137C0) == 0x00) && ((PERIPH) != 0x00)) - -/** - * @} - */ - -/** @defgroup Clock_source_to_output_on_MCO_pin - * @{ - */ - -#define RCC_MCO_NoClock ((uint8_t)0x00) -#define RCC_MCO_SYSCLK ((uint8_t)0x04) -#define RCC_MCO_HSI ((uint8_t)0x05) -#define RCC_MCO_HSE ((uint8_t)0x06) -#define RCC_MCO_PLLCLK_Div2 ((uint8_t)0x07) - -#ifndef STM32F10X_CL - #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ - ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ - ((MCO) == RCC_MCO_PLLCLK_Div2)) -#else - #define RCC_MCO_PLL2CLK ((uint8_t)0x08) - #define RCC_MCO_PLL3CLK_Div2 ((uint8_t)0x09) - #define RCC_MCO_XT1 ((uint8_t)0x0A) - #define RCC_MCO_PLL3CLK ((uint8_t)0x0B) - - #define IS_RCC_MCO(MCO) (((MCO) == RCC_MCO_NoClock) || ((MCO) == RCC_MCO_HSI) || \ - ((MCO) == RCC_MCO_SYSCLK) || ((MCO) == RCC_MCO_HSE) || \ - ((MCO) == RCC_MCO_PLLCLK_Div2) || ((MCO) == RCC_MCO_PLL2CLK) || \ - ((MCO) == RCC_MCO_PLL3CLK_Div2) || ((MCO) == RCC_MCO_XT1) || \ - ((MCO) == RCC_MCO_PLL3CLK)) -#endif /* STM32F10X_CL */ - -/** - * @} - */ - -/** @defgroup RCC_Flag - * @{ - */ - -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_LSERDY ((uint8_t)0x41) -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) - -#ifndef STM32F10X_CL - #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ - ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ - ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ - ((FLAG) == RCC_FLAG_LPWRRST)) -#else - #define RCC_FLAG_PLL2RDY ((uint8_t)0x3B) - #define RCC_FLAG_PLL3RDY ((uint8_t)0x3D) - #define IS_RCC_FLAG(FLAG) (((FLAG) == RCC_FLAG_HSIRDY) || ((FLAG) == RCC_FLAG_HSERDY) || \ - ((FLAG) == RCC_FLAG_PLLRDY) || ((FLAG) == RCC_FLAG_LSERDY) || \ - ((FLAG) == RCC_FLAG_PLL2RDY) || ((FLAG) == RCC_FLAG_PLL3RDY) || \ - ((FLAG) == RCC_FLAG_LSIRDY) || ((FLAG) == RCC_FLAG_PINRST) || \ - ((FLAG) == RCC_FLAG_PORRST) || ((FLAG) == RCC_FLAG_SFTRST) || \ - ((FLAG) == RCC_FLAG_IWDGRST)|| ((FLAG) == RCC_FLAG_WWDGRST)|| \ - ((FLAG) == RCC_FLAG_LPWRRST)) -#endif /* STM32F10X_CL */ - -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup RCC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Exported_Functions - * @{ - */ - -void RCC_DeInit(void); -void RCC_HSEConfig(uint32_t RCC_HSE); -ErrorStatus RCC_WaitForHSEStartUp(void); -void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue); -void RCC_HSICmd(FunctionalState NewState); -void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul); -void RCC_PLLCmd(FunctionalState NewState); - -#ifdef STM32F10X_CL - void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div); - void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div); - void RCC_PLL2Config(uint32_t RCC_PLL2Mul); - void RCC_PLL2Cmd(FunctionalState NewState); - void RCC_PLL3Config(uint32_t RCC_PLL3Mul); - void RCC_PLL3Cmd(FunctionalState NewState); -#endif /* STM32F10X_CL */ - -void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource); -uint8_t RCC_GetSYSCLKSource(void); -void RCC_HCLKConfig(uint32_t RCC_SYSCLK); -void RCC_PCLK1Config(uint32_t RCC_HCLK); -void RCC_PCLK2Config(uint32_t RCC_HCLK); -void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState); - -#ifndef STM32F10X_CL - void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource); -#else - void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource); -#endif /* STM32F10X_CL */ - -void RCC_ADCCLKConfig(uint32_t RCC_PCLK2); - -#ifdef STM32F10X_CL - void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource); - void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource); -#endif /* STM32F10X_CL */ - -void RCC_LSEConfig(uint8_t RCC_LSE); -void RCC_LSICmd(FunctionalState NewState); -void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource); -void RCC_RTCCLKCmd(FunctionalState NewState); -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks); -void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); -void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); - -#ifdef STM32F10X_CL -void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState); -#endif /* STM32F10X_CL */ - -void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState); -void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState); -void RCC_BackupResetCmd(FunctionalState NewState); -void RCC_ClockSecuritySystemCmd(FunctionalState NewState); -void RCC_MCOConfig(uint8_t RCC_MCO); -FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG); -void RCC_ClearFlag(void); -ITStatus RCC_GetITStatus(uint8_t RCC_IT); -void RCC_ClearITPendingBit(uint8_t RCC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_RCC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h deleted file mode 100644 index 8e40d0291..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_rtc.h +++ /dev/null @@ -1,134 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rtc.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the RTC firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_RTC_H -#define __STM32F10x_RTC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup RTC - * @{ - */ - -/** @defgroup RTC_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Exported_Constants - * @{ - */ - -/** @defgroup RTC_interrupts_define - * @{ - */ - -#define RTC_IT_OW ((uint16_t)0x0004) /*!< Overflow interrupt */ -#define RTC_IT_ALR ((uint16_t)0x0002) /*!< Alarm interrupt */ -#define RTC_IT_SEC ((uint16_t)0x0001) /*!< Second interrupt */ -#define IS_RTC_IT(IT) ((((IT) & (uint16_t)0xFFF8) == 0x00) && ((IT) != 0x00)) -#define IS_RTC_GET_IT(IT) (((IT) == RTC_IT_OW) || ((IT) == RTC_IT_ALR) || \ - ((IT) == RTC_IT_SEC)) -/** - * @} - */ - -/** @defgroup RTC_interrupts_flags - * @{ - */ - -#define RTC_FLAG_RTOFF ((uint16_t)0x0020) /*!< RTC Operation OFF flag */ -#define RTC_FLAG_RSF ((uint16_t)0x0008) /*!< Registers Synchronized flag */ -#define RTC_FLAG_OW ((uint16_t)0x0004) /*!< Overflow flag */ -#define RTC_FLAG_ALR ((uint16_t)0x0002) /*!< Alarm flag */ -#define RTC_FLAG_SEC ((uint16_t)0x0001) /*!< Second flag */ -#define IS_RTC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFFF0) == 0x00) && ((FLAG) != 0x00)) -#define IS_RTC_GET_FLAG(FLAG) (((FLAG) == RTC_FLAG_RTOFF) || ((FLAG) == RTC_FLAG_RSF) || \ - ((FLAG) == RTC_FLAG_OW) || ((FLAG) == RTC_FLAG_ALR) || \ - ((FLAG) == RTC_FLAG_SEC)) -#define IS_RTC_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFFFFF) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup RTC_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Exported_Functions - * @{ - */ - -void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState); -void RTC_EnterConfigMode(void); -void RTC_ExitConfigMode(void); -uint32_t RTC_GetCounter(void); -void RTC_SetCounter(uint32_t CounterValue); -void RTC_SetPrescaler(uint32_t PrescalerValue); -void RTC_SetAlarm(uint32_t AlarmValue); -uint32_t RTC_GetDivider(void); -void RTC_WaitForLastTask(void); -void RTC_WaitForSynchro(void); -FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG); -void RTC_ClearFlag(uint16_t RTC_FLAG); -ITStatus RTC_GetITStatus(uint16_t RTC_IT); -void RTC_ClearITPendingBit(uint16_t RTC_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_RTC_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h deleted file mode 100644 index 4c7a04a43..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_sdio.h +++ /dev/null @@ -1,530 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_sdio.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the SDIO firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SDIO_H -#define __STM32F10x_SDIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SDIO - * @{ - */ - -/** @defgroup SDIO_Exported_Types - * @{ - */ - -typedef struct -{ - uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SDIO_Clock_Edge */ - - uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is - enabled or disabled. - This parameter can be a value of @ref SDIO_Clock_Bypass */ - - uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or - disabled when the bus is idle. - This parameter can be a value of @ref SDIO_Clock_Power_Save */ - - uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width. - This parameter can be a value of @ref SDIO_Bus_Wide */ - - uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. - This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ - - uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. - This parameter can be a value between 0x00 and 0xFF. */ - -} SDIO_InitTypeDef; - -typedef struct -{ - uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent - to a card as part of a command message. If a command - contains an argument, it must be loaded into this register - before writing the command to the command register */ - - uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */ - - uint32_t SDIO_Response; /*!< Specifies the SDIO response type. - This parameter can be a value of @ref SDIO_Response_Type */ - - uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled. - This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ - - uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_CPSM_State */ -} SDIO_CmdInitTypeDef; - -typedef struct -{ - uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ - - uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */ - - uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer. - This parameter can be a value of @ref SDIO_Data_Block_Size */ - - uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer - is a read or write. - This parameter can be a value of @ref SDIO_Transfer_Direction */ - - uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode. - This parameter can be a value of @ref SDIO_Transfer_Type */ - - uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_DPSM_State */ -} SDIO_DataInitTypeDef; - -/** - * @} - */ - -/** @defgroup SDIO_Exported_Constants - * @{ - */ - -/** @defgroup SDIO_Clock_Edge - * @{ - */ - -#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000) -#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000) -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \ - ((EDGE) == SDIO_ClockEdge_Falling)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Bypass - * @{ - */ - -#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000) -#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \ - ((BYPASS) == SDIO_ClockBypass_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Power_Save - * @{ - */ - -#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000) -#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \ - ((SAVE) == SDIO_ClockPowerSave_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Bus_Wide - * @{ - */ - -#define SDIO_BusWide_1b ((uint32_t)0x00000000) -#define SDIO_BusWide_4b ((uint32_t)0x00000800) -#define SDIO_BusWide_8b ((uint32_t)0x00001000) -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \ - ((WIDE) == SDIO_BusWide_8b)) - -/** - * @} - */ - -/** @defgroup SDIO_Hardware_Flow_Control - * @{ - */ - -#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000) -#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000) -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \ - ((CONTROL) == SDIO_HardwareFlowControl_Enable)) -/** - * @} - */ - -/** @defgroup SDIO_Power_State - * @{ - */ - -#define SDIO_PowerState_OFF ((uint32_t)0x00000000) -#define SDIO_PowerState_ON ((uint32_t)0x00000003) -#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) -/** - * @} - */ - - -/** @defgroup SDIO_Interrupt_soucres - * @{ - */ - -#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001) -#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002) -#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004) -#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008) -#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010) -#define SDIO_IT_RXOVERR ((uint32_t)0x00000020) -#define SDIO_IT_CMDREND ((uint32_t)0x00000040) -#define SDIO_IT_CMDSENT ((uint32_t)0x00000080) -#define SDIO_IT_DATAEND ((uint32_t)0x00000100) -#define SDIO_IT_STBITERR ((uint32_t)0x00000200) -#define SDIO_IT_DBCKEND ((uint32_t)0x00000400) -#define SDIO_IT_CMDACT ((uint32_t)0x00000800) -#define SDIO_IT_TXACT ((uint32_t)0x00001000) -#define SDIO_IT_RXACT ((uint32_t)0x00002000) -#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000) -#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000) -#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000) -#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000) -#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000) -#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000) -#define SDIO_IT_TXDAVL ((uint32_t)0x00100000) -#define SDIO_IT_RXDAVL ((uint32_t)0x00200000) -#define SDIO_IT_SDIOIT ((uint32_t)0x00400000) -#define SDIO_IT_CEATAEND ((uint32_t)0x00800000) -#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00)) -/** - * @} - */ - -/** @defgroup SDIO_Command_Index - * @{ - */ - -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) -/** - * @} - */ - -/** @defgroup SDIO_Response_Type - * @{ - */ - -#define SDIO_Response_No ((uint32_t)0x00000000) -#define SDIO_Response_Short ((uint32_t)0x00000040) -#define SDIO_Response_Long ((uint32_t)0x000000C0) -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \ - ((RESPONSE) == SDIO_Response_Short) || \ - ((RESPONSE) == SDIO_Response_Long)) -/** - * @} - */ - -/** @defgroup SDIO_Wait_Interrupt_State - * @{ - */ - -#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */ -#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */ -#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */ -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \ - ((WAIT) == SDIO_Wait_Pend)) -/** - * @} - */ - -/** @defgroup SDIO_CPSM_State - * @{ - */ - -#define SDIO_CPSM_Disable ((uint32_t)0x00000000) -#define SDIO_CPSM_Enable ((uint32_t)0x00000400) -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable)) -/** - * @} - */ - -/** @defgroup SDIO_Response_Registers - * @{ - */ - -#define SDIO_RESP1 ((uint32_t)0x00000000) -#define SDIO_RESP2 ((uint32_t)0x00000004) -#define SDIO_RESP3 ((uint32_t)0x00000008) -#define SDIO_RESP4 ((uint32_t)0x0000000C) -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4)) -/** - * @} - */ - -/** @defgroup SDIO_Data_Length - * @{ - */ - -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) -/** - * @} - */ - -/** @defgroup SDIO_Data_Block_Size - * @{ - */ - -#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000) -#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010) -#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020) -#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030) -#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040) -#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050) -#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060) -#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070) -#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080) -#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090) -#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0) -#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0) -#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0) -#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0) -#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0) -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \ - ((SIZE) == SDIO_DataBlockSize_2b) || \ - ((SIZE) == SDIO_DataBlockSize_4b) || \ - ((SIZE) == SDIO_DataBlockSize_8b) || \ - ((SIZE) == SDIO_DataBlockSize_16b) || \ - ((SIZE) == SDIO_DataBlockSize_32b) || \ - ((SIZE) == SDIO_DataBlockSize_64b) || \ - ((SIZE) == SDIO_DataBlockSize_128b) || \ - ((SIZE) == SDIO_DataBlockSize_256b) || \ - ((SIZE) == SDIO_DataBlockSize_512b) || \ - ((SIZE) == SDIO_DataBlockSize_1024b) || \ - ((SIZE) == SDIO_DataBlockSize_2048b) || \ - ((SIZE) == SDIO_DataBlockSize_4096b) || \ - ((SIZE) == SDIO_DataBlockSize_8192b) || \ - ((SIZE) == SDIO_DataBlockSize_16384b)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Direction - * @{ - */ - -#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000) -#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002) -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \ - ((DIR) == SDIO_TransferDir_ToSDIO)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Type - * @{ - */ - -#define SDIO_TransferMode_Block ((uint32_t)0x00000000) -#define SDIO_TransferMode_Stream ((uint32_t)0x00000004) -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \ - ((MODE) == SDIO_TransferMode_Block)) -/** - * @} - */ - -/** @defgroup SDIO_DPSM_State - * @{ - */ - -#define SDIO_DPSM_Disable ((uint32_t)0x00000000) -#define SDIO_DPSM_Enable ((uint32_t)0x00000001) -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable)) -/** - * @} - */ - -/** @defgroup SDIO_Flags - * @{ - */ - -#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001) -#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002) -#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004) -#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008) -#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010) -#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020) -#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040) -#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080) -#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100) -#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200) -#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400) -#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800) -#define SDIO_FLAG_TXACT ((uint32_t)0x00001000) -#define SDIO_FLAG_RXACT ((uint32_t)0x00002000) -#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000) -#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000) -#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000) -#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000) -#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000) -#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000) -#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000) -#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000) -#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000) -#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000) -#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_DCRCFAIL) || \ - ((FLAG) == SDIO_FLAG_CTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_DTIMEOUT) || \ - ((FLAG) == SDIO_FLAG_TXUNDERR) || \ - ((FLAG) == SDIO_FLAG_RXOVERR) || \ - ((FLAG) == SDIO_FLAG_CMDREND) || \ - ((FLAG) == SDIO_FLAG_CMDSENT) || \ - ((FLAG) == SDIO_FLAG_DATAEND) || \ - ((FLAG) == SDIO_FLAG_STBITERR) || \ - ((FLAG) == SDIO_FLAG_DBCKEND) || \ - ((FLAG) == SDIO_FLAG_CMDACT) || \ - ((FLAG) == SDIO_FLAG_TXACT) || \ - ((FLAG) == SDIO_FLAG_RXACT) || \ - ((FLAG) == SDIO_FLAG_TXFIFOHE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOHF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOF) || \ - ((FLAG) == SDIO_FLAG_RXFIFOF) || \ - ((FLAG) == SDIO_FLAG_TXFIFOE) || \ - ((FLAG) == SDIO_FLAG_RXFIFOE) || \ - ((FLAG) == SDIO_FLAG_TXDAVL) || \ - ((FLAG) == SDIO_FLAG_RXDAVL) || \ - ((FLAG) == SDIO_FLAG_SDIOIT) || \ - ((FLAG) == SDIO_FLAG_CEATAEND)) - -#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00)) - -#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \ - ((IT) == SDIO_IT_DCRCFAIL) || \ - ((IT) == SDIO_IT_CTIMEOUT) || \ - ((IT) == SDIO_IT_DTIMEOUT) || \ - ((IT) == SDIO_IT_TXUNDERR) || \ - ((IT) == SDIO_IT_RXOVERR) || \ - ((IT) == SDIO_IT_CMDREND) || \ - ((IT) == SDIO_IT_CMDSENT) || \ - ((IT) == SDIO_IT_DATAEND) || \ - ((IT) == SDIO_IT_STBITERR) || \ - ((IT) == SDIO_IT_DBCKEND) || \ - ((IT) == SDIO_IT_CMDACT) || \ - ((IT) == SDIO_IT_TXACT) || \ - ((IT) == SDIO_IT_RXACT) || \ - ((IT) == SDIO_IT_TXFIFOHE) || \ - ((IT) == SDIO_IT_RXFIFOHF) || \ - ((IT) == SDIO_IT_TXFIFOF) || \ - ((IT) == SDIO_IT_RXFIFOF) || \ - ((IT) == SDIO_IT_TXFIFOE) || \ - ((IT) == SDIO_IT_RXFIFOE) || \ - ((IT) == SDIO_IT_TXDAVL) || \ - ((IT) == SDIO_IT_RXDAVL) || \ - ((IT) == SDIO_IT_SDIOIT) || \ - ((IT) == SDIO_IT_CEATAEND)) - -#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00)) - -/** - * @} - */ - -/** @defgroup SDIO_Read_Wait_Mode - * @{ - */ - -#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000000) -#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000001) -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \ - ((MODE) == SDIO_ReadWaitMode_DATA2)) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup SDIO_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SDIO_Exported_Functions - * @{ - */ - -void SDIO_DeInit(void); -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct); -void SDIO_ClockCmd(FunctionalState NewState); -void SDIO_SetPowerState(uint32_t SDIO_PowerState); -uint32_t SDIO_GetPowerState(void); -void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState); -void SDIO_DMACmd(FunctionalState NewState); -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct); -uint8_t SDIO_GetCommandResponse(void); -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct); -uint32_t SDIO_GetDataCounter(void); -uint32_t SDIO_ReadData(void); -void SDIO_WriteData(uint32_t Data); -uint32_t SDIO_GetFIFOCount(void); -void SDIO_StartSDIOReadWait(FunctionalState NewState); -void SDIO_StopSDIOReadWait(FunctionalState NewState); -void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); -void SDIO_SetSDIOOperation(FunctionalState NewState); -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState); -void SDIO_CommandCompletionCmd(FunctionalState NewState); -void SDIO_CEATAITCmd(FunctionalState NewState); -void SDIO_SendCEATACmd(FunctionalState NewState); -FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG); -void SDIO_ClearFlag(uint32_t SDIO_FLAG); -ITStatus SDIO_GetITStatus(uint32_t SDIO_IT); -void SDIO_ClearITPendingBit(uint32_t SDIO_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_SDIO_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h deleted file mode 100644 index 8c006b8e2..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_spi.h +++ /dev/null @@ -1,490 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_spi.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the SPI firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_SPI_H -#define __STM32F10x_SPI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup SPI - * @{ - */ - -/** @defgroup SPI_Exported_Types - * @{ - */ - -/** - * @brief SPI Init structure definition - */ - -typedef struct -{ - uint16_t SPI_Direction; /*!< Specifies the SPI unidirectional or bidirectional data mode. - This parameter can be any combination of @ref SPI_data_direction */ - - uint16_t SPI_Mode; /*!< Specifies the SPI operating mode. - This parameter can be any combination of @ref SPI_mode */ - - uint16_t SPI_DataSize; /*!< Specifies the SPI data size. - This parameter can be any combination of @ref SPI_data_size */ - - uint16_t SPI_CPOL; /*!< Specifies the serial clock steady state. - This parameter can be any combination of @ref SPI_Clock_Polarity */ - - uint16_t SPI_CPHA; /*!< Specifies the clock active edge for the bit capture. - This parameter can be any combination of @ref SPI_Clock_Phase */ - - uint16_t SPI_NSS; /*!< Specifies whether the NSS signal is managed by - hardware (NSS pin) or by software using the SSI bit. - This parameter can be any combination of @ref SPI_Slave_Select_management */ - - uint16_t SPI_BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be - used to configure the transmit and receive SCK clock. - This parameter can be any combination of @ref SPI_BaudRate_Prescaler. - @note The communication clock is derived from the master - clock. The slave clock does not need to be set. */ - - uint16_t SPI_FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be any combination of @ref SPI_MSB_LSB_transmission */ - - uint16_t SPI_CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. */ -}SPI_InitTypeDef; - -/** - * @brief I2S Init structure definition - */ - -typedef struct -{ - - uint16_t I2S_Mode; /*!< Specifies the I2S operating mode. - This parameter can be any combination of @ref I2S_Mode */ - - uint16_t I2S_Standard; /*!< Specifies the standard used for the I2S communication. - This parameter can be any combination of @ref I2S_Standard */ - - uint16_t I2S_DataFormat; /*!< Specifies the data format for the I2S communication. - This parameter can be any combination of @ref I2S_Data_Format */ - - uint16_t I2S_MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. - This parameter can be any combination of @ref I2S_MCLK_Output */ - - uint16_t I2S_AudioFreq; /*!< Specifies the frequency selected for the I2S communication. - This parameter can be any combination of @ref I2S_Audio_Frequency */ - - uint16_t I2S_CPOL; /*!< Specifies the idle state of the I2S clock. - This parameter can be any combination of @ref I2S_Clock_Polarity */ -}I2S_InitTypeDef; - -/** - * @} - */ - -/** @defgroup SPI_Exported_Constants - * @{ - */ - -#define IS_SPI_ALL_PERIPH(PERIPH) (((PERIPH) == SPI1) || \ - ((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3)) - -#define IS_SPI_23_PERIPH(PERIPH) (((PERIPH) == SPI2) || \ - ((PERIPH) == SPI3)) - -/** @defgroup SPI_data_direction - * @{ - */ - -#define SPI_Direction_2Lines_FullDuplex ((uint16_t)0x0000) -#define SPI_Direction_2Lines_RxOnly ((uint16_t)0x0400) -#define SPI_Direction_1Line_Rx ((uint16_t)0x8000) -#define SPI_Direction_1Line_Tx ((uint16_t)0xC000) -#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_Direction_2Lines_FullDuplex) || \ - ((MODE) == SPI_Direction_2Lines_RxOnly) || \ - ((MODE) == SPI_Direction_1Line_Rx) || \ - ((MODE) == SPI_Direction_1Line_Tx)) -/** - * @} - */ - -/** @defgroup SPI_mode - * @{ - */ - -#define SPI_Mode_Master ((uint16_t)0x0104) -#define SPI_Mode_Slave ((uint16_t)0x0000) -#define IS_SPI_MODE(MODE) (((MODE) == SPI_Mode_Master) || \ - ((MODE) == SPI_Mode_Slave)) -/** - * @} - */ - -/** @defgroup SPI_data_size - * @{ - */ - -#define SPI_DataSize_16b ((uint16_t)0x0800) -#define SPI_DataSize_8b ((uint16_t)0x0000) -#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DataSize_16b) || \ - ((DATASIZE) == SPI_DataSize_8b)) -/** - * @} - */ - -/** @defgroup SPI_Clock_Polarity - * @{ - */ - -#define SPI_CPOL_Low ((uint16_t)0x0000) -#define SPI_CPOL_High ((uint16_t)0x0002) -#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_CPOL_Low) || \ - ((CPOL) == SPI_CPOL_High)) -/** - * @} - */ - -/** @defgroup SPI_Clock_Phase - * @{ - */ - -#define SPI_CPHA_1Edge ((uint16_t)0x0000) -#define SPI_CPHA_2Edge ((uint16_t)0x0001) -#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_CPHA_1Edge) || \ - ((CPHA) == SPI_CPHA_2Edge)) -/** - * @} - */ - -/** @defgroup SPI_Slave_Select_management - * @{ - */ - -#define SPI_NSS_Soft ((uint16_t)0x0200) -#define SPI_NSS_Hard ((uint16_t)0x0000) -#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_Soft) || \ - ((NSS) == SPI_NSS_Hard)) -/** - * @} - */ - -/** @defgroup SPI_BaudRate_Prescaler - * @{ - */ - -#define SPI_BaudRatePrescaler_2 ((uint16_t)0x0000) -#define SPI_BaudRatePrescaler_4 ((uint16_t)0x0008) -#define SPI_BaudRatePrescaler_8 ((uint16_t)0x0010) -#define SPI_BaudRatePrescaler_16 ((uint16_t)0x0018) -#define SPI_BaudRatePrescaler_32 ((uint16_t)0x0020) -#define SPI_BaudRatePrescaler_64 ((uint16_t)0x0028) -#define SPI_BaudRatePrescaler_128 ((uint16_t)0x0030) -#define SPI_BaudRatePrescaler_256 ((uint16_t)0x0038) -#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BaudRatePrescaler_2) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_4) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_8) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_16) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_32) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_64) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_128) || \ - ((PRESCALER) == SPI_BaudRatePrescaler_256)) -/** - * @} - */ - -/** @defgroup SPI_MSB_LSB_transmission - * @{ - */ - -#define SPI_FirstBit_MSB ((uint16_t)0x0000) -#define SPI_FirstBit_LSB ((uint16_t)0x0080) -#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FirstBit_MSB) || \ - ((BIT) == SPI_FirstBit_LSB)) -/** - * @} - */ - -/** @defgroup I2S_Mode - * @{ - */ - -#define I2S_Mode_SlaveTx ((uint16_t)0x0000) -#define I2S_Mode_SlaveRx ((uint16_t)0x0100) -#define I2S_Mode_MasterTx ((uint16_t)0x0200) -#define I2S_Mode_MasterRx ((uint16_t)0x0300) -#define IS_I2S_MODE(MODE) (((MODE) == I2S_Mode_SlaveTx) || \ - ((MODE) == I2S_Mode_SlaveRx) || \ - ((MODE) == I2S_Mode_MasterTx) || \ - ((MODE) == I2S_Mode_MasterRx) ) -/** - * @} - */ - -/** @defgroup I2S_Standard - * @{ - */ - -#define I2S_Standard_Phillips ((uint16_t)0x0000) -#define I2S_Standard_MSB ((uint16_t)0x0010) -#define I2S_Standard_LSB ((uint16_t)0x0020) -#define I2S_Standard_PCMShort ((uint16_t)0x0030) -#define I2S_Standard_PCMLong ((uint16_t)0x00B0) -#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_Standard_Phillips) || \ - ((STANDARD) == I2S_Standard_MSB) || \ - ((STANDARD) == I2S_Standard_LSB) || \ - ((STANDARD) == I2S_Standard_PCMShort) || \ - ((STANDARD) == I2S_Standard_PCMLong)) -/** - * @} - */ - -/** @defgroup I2S_Data_Format - * @{ - */ - -#define I2S_DataFormat_16b ((uint16_t)0x0000) -#define I2S_DataFormat_16bextended ((uint16_t)0x0001) -#define I2S_DataFormat_24b ((uint16_t)0x0003) -#define I2S_DataFormat_32b ((uint16_t)0x0005) -#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DataFormat_16b) || \ - ((FORMAT) == I2S_DataFormat_16bextended) || \ - ((FORMAT) == I2S_DataFormat_24b) || \ - ((FORMAT) == I2S_DataFormat_32b)) -/** - * @} - */ - -/** @defgroup I2S_MCLK_Output - * @{ - */ - -#define I2S_MCLKOutput_Enable ((uint16_t)0x0200) -#define I2S_MCLKOutput_Disable ((uint16_t)0x0000) -#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOutput_Enable) || \ - ((OUTPUT) == I2S_MCLKOutput_Disable)) -/** - * @} - */ - -/** @defgroup I2S_Audio_Frequency - * @{ - */ - -#define I2S_AudioFreq_96k ((uint16_t)96000) -#define I2S_AudioFreq_48k ((uint16_t)48000) -#define I2S_AudioFreq_44k ((uint16_t)44100) -#define I2S_AudioFreq_32k ((uint16_t)32000) -#define I2S_AudioFreq_22k ((uint16_t)22050) -#define I2S_AudioFreq_16k ((uint16_t)16000) -#define I2S_AudioFreq_11k ((uint16_t)11025) -#define I2S_AudioFreq_8k ((uint16_t)8000) -#define I2S_AudioFreq_Default ((uint16_t)2) -#define IS_I2S_AUDIO_FREQ(FREQ) (((FREQ) == I2S_AudioFreq_96k) || \ - ((FREQ) == I2S_AudioFreq_48k) || \ - ((FREQ) == I2S_AudioFreq_44k) || \ - ((FREQ) == I2S_AudioFreq_32k) || \ - ((FREQ) == I2S_AudioFreq_22k) || \ - ((FREQ) == I2S_AudioFreq_16k) || \ - ((FREQ) == I2S_AudioFreq_11k) || \ - ((FREQ) == I2S_AudioFreq_8k) || \ - ((FREQ) == I2S_AudioFreq_Default)) -/** - * @} - */ - -/** @defgroup I2S_Clock_Polarity - * @{ - */ - -#define I2S_CPOL_Low ((uint16_t)0x0000) -#define I2S_CPOL_High ((uint16_t)0x0008) -#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_Low) || \ - ((CPOL) == I2S_CPOL_High)) -/** - * @} - */ - -/** @defgroup SPI_I2S_DMA_transfer_requests - * @{ - */ - -#define SPI_I2S_DMAReq_Tx ((uint16_t)0x0002) -#define SPI_I2S_DMAReq_Rx ((uint16_t)0x0001) -#define IS_SPI_I2S_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFFFC) == 0x00) && ((DMAREQ) != 0x00)) -/** - * @} - */ - -/** @defgroup SPI_NSS_internal_software_mangement - * @{ - */ - -#define SPI_NSSInternalSoft_Set ((uint16_t)0x0100) -#define SPI_NSSInternalSoft_Reset ((uint16_t)0xFEFF) -#define IS_SPI_NSS_INTERNAL(INTERNAL) (((INTERNAL) == SPI_NSSInternalSoft_Set) || \ - ((INTERNAL) == SPI_NSSInternalSoft_Reset)) -/** - * @} - */ - -/** @defgroup SPI_CRC_Transmit_Receive - * @{ - */ - -#define SPI_CRC_Tx ((uint8_t)0x00) -#define SPI_CRC_Rx ((uint8_t)0x01) -#define IS_SPI_CRC(CRC) (((CRC) == SPI_CRC_Tx) || ((CRC) == SPI_CRC_Rx)) -/** - * @} - */ - -/** @defgroup SPI_direction_transmit_receive - * @{ - */ - -#define SPI_Direction_Rx ((uint16_t)0xBFFF) -#define SPI_Direction_Tx ((uint16_t)0x4000) -#define IS_SPI_DIRECTION(DIRECTION) (((DIRECTION) == SPI_Direction_Rx) || \ - ((DIRECTION) == SPI_Direction_Tx)) -/** - * @} - */ - -/** @defgroup SPI_I2S_interrupts_definition - * @{ - */ - -#define SPI_I2S_IT_TXE ((uint8_t)0x71) -#define SPI_I2S_IT_RXNE ((uint8_t)0x60) -#define SPI_I2S_IT_ERR ((uint8_t)0x50) -#define IS_SPI_I2S_CONFIG_IT(IT) (((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == SPI_I2S_IT_RXNE) || \ - ((IT) == SPI_I2S_IT_ERR)) -#define SPI_I2S_IT_OVR ((uint8_t)0x56) -#define SPI_IT_MODF ((uint8_t)0x55) -#define SPI_IT_CRCERR ((uint8_t)0x54) -#define I2S_IT_UDR ((uint8_t)0x53) -#define IS_SPI_I2S_CLEAR_IT(IT) (((IT) == SPI_IT_CRCERR)) -#define IS_SPI_I2S_GET_IT(IT) (((IT) == SPI_I2S_IT_RXNE) || ((IT) == SPI_I2S_IT_TXE) || \ - ((IT) == I2S_IT_UDR) || ((IT) == SPI_IT_CRCERR) || \ - ((IT) == SPI_IT_MODF) || ((IT) == SPI_I2S_IT_OVR)) -/** - * @} - */ - -/** @defgroup SPI_I2S_flags_definition - * @{ - */ - -#define SPI_I2S_FLAG_RXNE ((uint16_t)0x0001) -#define SPI_I2S_FLAG_TXE ((uint16_t)0x0002) -#define I2S_FLAG_CHSIDE ((uint16_t)0x0004) -#define I2S_FLAG_UDR ((uint16_t)0x0008) -#define SPI_FLAG_CRCERR ((uint16_t)0x0010) -#define SPI_FLAG_MODF ((uint16_t)0x0020) -#define SPI_I2S_FLAG_OVR ((uint16_t)0x0040) -#define SPI_I2S_FLAG_BSY ((uint16_t)0x0080) -#define IS_SPI_I2S_CLEAR_FLAG(FLAG) (((FLAG) == SPI_FLAG_CRCERR)) -#define IS_SPI_I2S_GET_FLAG(FLAG) (((FLAG) == SPI_I2S_FLAG_BSY) || ((FLAG) == SPI_I2S_FLAG_OVR) || \ - ((FLAG) == SPI_FLAG_MODF) || ((FLAG) == SPI_FLAG_CRCERR) || \ - ((FLAG) == I2S_FLAG_UDR) || ((FLAG) == I2S_FLAG_CHSIDE) || \ - ((FLAG) == SPI_I2S_FLAG_TXE) || ((FLAG) == SPI_I2S_FLAG_RXNE)) -/** - * @} - */ - -/** @defgroup SPI_CRC_polynomial - * @{ - */ - -#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) ((POLYNOMIAL) >= 0x1) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup SPI_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Exported_Functions - * @{ - */ - -void SPI_I2S_DeInit(SPI_TypeDef* SPIx); -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct); -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct); -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct); -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct); -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState); -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState); -void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data); -uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx); -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft); -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState); -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize); -void SPI_TransmitCRC(SPI_TypeDef* SPIx); -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState); -uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC); -uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx); -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction); -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG); -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_SPI_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h deleted file mode 100644 index 323169bde..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_tim.h +++ /dev/null @@ -1,1040 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_tim.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the TIM firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_TIM_H -#define __STM32F10x_TIM_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/** @defgroup TIM_Exported_Types - * @{ - */ - -/** - * @brief TIM Time Base Init structure definition - * @note This sturcture is used with all TIMx except for TIM6 and TIM7. - */ - -typedef struct -{ - uint16_t TIM_Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between 0x0000 and 0xFFFF */ - - uint16_t TIM_CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint16_t TIM_Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter must be a number between 0x0000 and 0xFFFF. */ - - uint16_t TIM_ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_Clock_Division_CKD */ - - uint8_t TIM_RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - This parameter must be a number between 0x00 and 0xFF. - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_TimeBaseInitTypeDef; - -/** - * @brief TIM Output Compare Init structure definition - */ - -typedef struct -{ - uint16_t TIM_OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint16_t TIM_OutputState; /*!< Specifies the TIM Output Compare state. - This parameter can be a value of @ref TIM_Output_Compare_state */ - - uint16_t TIM_OutputNState; /*!< Specifies the TIM complementary Output Compare state. - This parameter can be a value of @ref TIM_Output_Compare_N_state - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between 0x0000 and 0xFFFF */ - - uint16_t TIM_OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint16_t TIM_OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint16_t TIM_OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_OCInitTypeDef; - -/** - * @brief TIM Input Capture Init structure definition - */ - -typedef struct -{ - - uint16_t TIM_Channel; /*!< Specifies the TIM channel. - This parameter can be a value of @ref TIM_Channel */ - - uint16_t TIM_ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint16_t TIM_ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint16_t TIM_ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint16_t TIM_ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between 0x0 and 0xF */ -} TIM_ICInitTypeDef; - -/** - * @brief BDTR structure definition - * @note This sturcture is used only with TIM1 and TIM8. - */ - -typedef struct -{ - - uint16_t TIM_OSSRState; /*!< Specifies the Off-State selection used in Run mode. - This parameter can be a value of @ref OSSR_Off_State_Selection_for_Run_mode_state */ - - uint16_t TIM_OSSIState; /*!< Specifies the Off-State used in Idle state. - This parameter can be a value of @ref OSSI_Off_State_Selection_for_Idle_mode_state */ - - uint16_t TIM_LOCKLevel; /*!< Specifies the LOCK level parameters. - This parameter can be a value of @ref Lock_level */ - - uint16_t TIM_DeadTime; /*!< Specifies the delay time between the switching-off and the - switching-on of the outputs. - This parameter can be a number between 0x00 and 0xFF */ - - uint16_t TIM_Break; /*!< Specifies whether the TIM Break input is enabled or not. - This parameter can be a value of @ref Break_Input_enable_disable */ - - uint16_t TIM_BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. - This parameter can be a value of @ref Break_Polarity */ - - uint16_t TIM_AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ -} TIM_BDTRInitTypeDef; - -/** @defgroup TIM_Exported_constants - * @{ - */ - -#define IS_TIM_ALL_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM6) || \ - ((PERIPH) == TIM7) || \ - ((PERIPH) == TIM8)) - -#define IS_TIM_18_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM8)) - -#define IS_TIM_123458_PERIPH(PERIPH) (((PERIPH) == TIM1) || \ - ((PERIPH) == TIM2) || \ - ((PERIPH) == TIM3) || \ - ((PERIPH) == TIM4) || \ - ((PERIPH) == TIM5) || \ - ((PERIPH) == TIM8)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes - * @{ - */ - -#define TIM_OCMode_Timing ((uint16_t)0x0000) -#define TIM_OCMode_Active ((uint16_t)0x0010) -#define TIM_OCMode_Inactive ((uint16_t)0x0020) -#define TIM_OCMode_Toggle ((uint16_t)0x0030) -#define TIM_OCMode_PWM1 ((uint16_t)0x0060) -#define TIM_OCMode_PWM2 ((uint16_t)0x0070) -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2)) -#define IS_TIM_OCM(MODE) (((MODE) == TIM_OCMode_Timing) || \ - ((MODE) == TIM_OCMode_Active) || \ - ((MODE) == TIM_OCMode_Inactive) || \ - ((MODE) == TIM_OCMode_Toggle)|| \ - ((MODE) == TIM_OCMode_PWM1) || \ - ((MODE) == TIM_OCMode_PWM2) || \ - ((MODE) == TIM_ForcedAction_Active) || \ - ((MODE) == TIM_ForcedAction_InActive)) -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode - * @{ - */ - -#define TIM_OPMode_Single ((uint16_t)0x0008) -#define TIM_OPMode_Repetitive ((uint16_t)0x0000) -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMode_Single) || \ - ((MODE) == TIM_OPMode_Repetitive)) -/** - * @} - */ - -/** @defgroup TIM_Channel - * @{ - */ - -#define TIM_Channel_1 ((uint16_t)0x0000) -#define TIM_Channel_2 ((uint16_t)0x0004) -#define TIM_Channel_3 ((uint16_t)0x0008) -#define TIM_Channel_4 ((uint16_t)0x000C) -#define IS_TIM_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3) || \ - ((CHANNEL) == TIM_Channel_4)) -#define IS_TIM_PWMI_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2)) -#define IS_TIM_COMPLEMENTARY_CHANNEL(CHANNEL) (((CHANNEL) == TIM_Channel_1) || \ - ((CHANNEL) == TIM_Channel_2) || \ - ((CHANNEL) == TIM_Channel_3)) -/** - * @} - */ - -/** @defgroup TIM_Clock_Division_CKD - * @{ - */ - -#define TIM_CKD_DIV1 ((uint16_t)0x0000) -#define TIM_CKD_DIV2 ((uint16_t)0x0100) -#define TIM_CKD_DIV4 ((uint16_t)0x0200) -#define IS_TIM_CKD_DIV(DIV) (((DIV) == TIM_CKD_DIV1) || \ - ((DIV) == TIM_CKD_DIV2) || \ - ((DIV) == TIM_CKD_DIV4)) -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode - * @{ - */ - -#define TIM_CounterMode_Up ((uint16_t)0x0000) -#define TIM_CounterMode_Down ((uint16_t)0x0010) -#define TIM_CounterMode_CenterAligned1 ((uint16_t)0x0020) -#define TIM_CounterMode_CenterAligned2 ((uint16_t)0x0040) -#define TIM_CounterMode_CenterAligned3 ((uint16_t)0x0060) -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_CounterMode_Up) || \ - ((MODE) == TIM_CounterMode_Down) || \ - ((MODE) == TIM_CounterMode_CenterAligned1) || \ - ((MODE) == TIM_CounterMode_CenterAligned2) || \ - ((MODE) == TIM_CounterMode_CenterAligned3)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity - * @{ - */ - -#define TIM_OCPolarity_High ((uint16_t)0x0000) -#define TIM_OCPolarity_Low ((uint16_t)0x0002) -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPolarity_High) || \ - ((POLARITY) == TIM_OCPolarity_Low)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity - * @{ - */ - -#define TIM_OCNPolarity_High ((uint16_t)0x0000) -#define TIM_OCNPolarity_Low ((uint16_t)0x0008) -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPolarity_High) || \ - ((POLARITY) == TIM_OCNPolarity_Low)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_state - * @{ - */ - -#define TIM_OutputState_Disable ((uint16_t)0x0000) -#define TIM_OutputState_Enable ((uint16_t)0x0001) -#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OutputState_Disable) || \ - ((STATE) == TIM_OutputState_Enable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_state - * @{ - */ - -#define TIM_OutputNState_Disable ((uint16_t)0x0000) -#define TIM_OutputNState_Enable ((uint16_t)0x0004) -#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OutputNState_Disable) || \ - ((STATE) == TIM_OutputNState_Enable)) -/** - * @} - */ - -/** @defgroup TIM_Capture_Compare_state - * @{ - */ - -#define TIM_CCx_Enable ((uint16_t)0x0001) -#define TIM_CCx_Disable ((uint16_t)0x0000) -#define IS_TIM_CCX(CCX) (((CCX) == TIM_CCx_Enable) || \ - ((CCX) == TIM_CCx_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Capture_Compare_N_state - * @{ - */ - -#define TIM_CCxN_Enable ((uint16_t)0x0004) -#define TIM_CCxN_Disable ((uint16_t)0x0000) -#define IS_TIM_CCXN(CCXN) (((CCXN) == TIM_CCxN_Enable) || \ - ((CCXN) == TIM_CCxN_Disable)) -/** - * @} - */ - -/** @defgroup Break_Input_enable_disable - * @{ - */ - -#define TIM_Break_Enable ((uint16_t)0x1000) -#define TIM_Break_Disable ((uint16_t)0x0000) -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_Break_Enable) || \ - ((STATE) == TIM_Break_Disable)) -/** - * @} - */ - -/** @defgroup Break_Polarity - * @{ - */ - -#define TIM_BreakPolarity_Low ((uint16_t)0x0000) -#define TIM_BreakPolarity_High ((uint16_t)0x2000) -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BreakPolarity_Low) || \ - ((POLARITY) == TIM_BreakPolarity_High)) -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset - * @{ - */ - -#define TIM_AutomaticOutput_Enable ((uint16_t)0x4000) -#define TIM_AutomaticOutput_Disable ((uint16_t)0x0000) -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AutomaticOutput_Enable) || \ - ((STATE) == TIM_AutomaticOutput_Disable)) -/** - * @} - */ - -/** @defgroup Lock_level - * @{ - */ - -#define TIM_LOCKLevel_OFF ((uint16_t)0x0000) -#define TIM_LOCKLevel_1 ((uint16_t)0x0100) -#define TIM_LOCKLevel_2 ((uint16_t)0x0200) -#define TIM_LOCKLevel_3 ((uint16_t)0x0300) -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLevel_OFF) || \ - ((LEVEL) == TIM_LOCKLevel_1) || \ - ((LEVEL) == TIM_LOCKLevel_2) || \ - ((LEVEL) == TIM_LOCKLevel_3)) -/** - * @} - */ - -/** @defgroup OSSI_Off_State_Selection_for_Idle_mode_state - * @{ - */ - -#define TIM_OSSIState_Enable ((uint16_t)0x0400) -#define TIM_OSSIState_Disable ((uint16_t)0x0000) -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSIState_Enable) || \ - ((STATE) == TIM_OSSIState_Disable)) -/** - * @} - */ - -/** @defgroup OSSR_Off_State_Selection_for_Run_mode_state - * @{ - */ - -#define TIM_OSSRState_Enable ((uint16_t)0x0800) -#define TIM_OSSRState_Disable ((uint16_t)0x0000) -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSRState_Enable) || \ - ((STATE) == TIM_OSSRState_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State - * @{ - */ - -#define TIM_OCIdleState_Set ((uint16_t)0x0100) -#define TIM_OCIdleState_Reset ((uint16_t)0x0000) -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIdleState_Set) || \ - ((STATE) == TIM_OCIdleState_Reset)) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State - * @{ - */ - -#define TIM_OCNIdleState_Set ((uint16_t)0x0200) -#define TIM_OCNIdleState_Reset ((uint16_t)0x0000) -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIdleState_Set) || \ - ((STATE) == TIM_OCNIdleState_Reset)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity - * @{ - */ - -#define TIM_ICPolarity_Rising ((uint16_t)0x0000) -#define TIM_ICPolarity_Falling ((uint16_t)0x0002) -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPolarity_Rising) || \ - ((POLARITY) == TIM_ICPolarity_Falling)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection - * @{ - */ - -#define TIM_ICSelection_DirectTI ((uint16_t)0x0001) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSelection_IndirectTI ((uint16_t)0x0002) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively. */ -#define TIM_ICSelection_TRC ((uint16_t)0x0003) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC. */ -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSelection_DirectTI) || \ - ((SELECTION) == TIM_ICSelection_IndirectTI) || \ - ((SELECTION) == TIM_ICSelection_TRC)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler - * @{ - */ - -#define TIM_ICPSC_DIV1 ((uint16_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input. */ -#define TIM_ICPSC_DIV2 ((uint16_t)0x0004) /*!< Capture performed once every 2 events. */ -#define TIM_ICPSC_DIV4 ((uint16_t)0x0008) /*!< Capture performed once every 4 events. */ -#define TIM_ICPSC_DIV8 ((uint16_t)0x000C) /*!< Capture performed once every 8 events. */ -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) -/** - * @} - */ - -/** @defgroup TIM_interrupt_sources - * @{ - */ - -#define TIM_IT_Update ((uint16_t)0x0001) -#define TIM_IT_CC1 ((uint16_t)0x0002) -#define TIM_IT_CC2 ((uint16_t)0x0004) -#define TIM_IT_CC3 ((uint16_t)0x0008) -#define TIM_IT_CC4 ((uint16_t)0x0010) -#define TIM_IT_COM ((uint16_t)0x0020) -#define TIM_IT_Trigger ((uint16_t)0x0040) -#define TIM_IT_Break ((uint16_t)0x0080) -#define IS_TIM_IT(IT) ((((IT) & (uint16_t)0xFF00) == 0x0000) && ((IT) != 0x0000)) - -#define IS_TIM_GET_IT(IT) (((IT) == TIM_IT_Update) || \ - ((IT) == TIM_IT_CC1) || \ - ((IT) == TIM_IT_CC2) || \ - ((IT) == TIM_IT_CC3) || \ - ((IT) == TIM_IT_CC4) || \ - ((IT) == TIM_IT_COM) || \ - ((IT) == TIM_IT_Trigger) || \ - ((IT) == TIM_IT_Break)) -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address - * @{ - */ - -#define TIM_DMABase_CR1 ((uint16_t)0x0000) -#define TIM_DMABase_CR2 ((uint16_t)0x0001) -#define TIM_DMABase_SMCR ((uint16_t)0x0002) -#define TIM_DMABase_DIER ((uint16_t)0x0003) -#define TIM_DMABase_SR ((uint16_t)0x0004) -#define TIM_DMABase_EGR ((uint16_t)0x0005) -#define TIM_DMABase_CCMR1 ((uint16_t)0x0006) -#define TIM_DMABase_CCMR2 ((uint16_t)0x0007) -#define TIM_DMABase_CCER ((uint16_t)0x0008) -#define TIM_DMABase_CNT ((uint16_t)0x0009) -#define TIM_DMABase_PSC ((uint16_t)0x000A) -#define TIM_DMABase_ARR ((uint16_t)0x000B) -#define TIM_DMABase_RCR ((uint16_t)0x000C) -#define TIM_DMABase_CCR1 ((uint16_t)0x000D) -#define TIM_DMABase_CCR2 ((uint16_t)0x000E) -#define TIM_DMABase_CCR3 ((uint16_t)0x000F) -#define TIM_DMABase_CCR4 ((uint16_t)0x0010) -#define TIM_DMABase_BDTR ((uint16_t)0x0011) -#define TIM_DMABase_DCR ((uint16_t)0x0012) -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \ - ((BASE) == TIM_DMABase_CR2) || \ - ((BASE) == TIM_DMABase_SMCR) || \ - ((BASE) == TIM_DMABase_DIER) || \ - ((BASE) == TIM_DMABase_SR) || \ - ((BASE) == TIM_DMABase_EGR) || \ - ((BASE) == TIM_DMABase_CCMR1) || \ - ((BASE) == TIM_DMABase_CCMR2) || \ - ((BASE) == TIM_DMABase_CCER) || \ - ((BASE) == TIM_DMABase_CNT) || \ - ((BASE) == TIM_DMABase_PSC) || \ - ((BASE) == TIM_DMABase_ARR) || \ - ((BASE) == TIM_DMABase_RCR) || \ - ((BASE) == TIM_DMABase_CCR1) || \ - ((BASE) == TIM_DMABase_CCR2) || \ - ((BASE) == TIM_DMABase_CCR3) || \ - ((BASE) == TIM_DMABase_CCR4) || \ - ((BASE) == TIM_DMABase_BDTR) || \ - ((BASE) == TIM_DMABase_DCR)) -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length - * @{ - */ - -#define TIM_DMABurstLength_1Byte ((uint16_t)0x0000) -#define TIM_DMABurstLength_2Bytes ((uint16_t)0x0100) -#define TIM_DMABurstLength_3Bytes ((uint16_t)0x0200) -#define TIM_DMABurstLength_4Bytes ((uint16_t)0x0300) -#define TIM_DMABurstLength_5Bytes ((uint16_t)0x0400) -#define TIM_DMABurstLength_6Bytes ((uint16_t)0x0500) -#define TIM_DMABurstLength_7Bytes ((uint16_t)0x0600) -#define TIM_DMABurstLength_8Bytes ((uint16_t)0x0700) -#define TIM_DMABurstLength_9Bytes ((uint16_t)0x0800) -#define TIM_DMABurstLength_10Bytes ((uint16_t)0x0900) -#define TIM_DMABurstLength_11Bytes ((uint16_t)0x0A00) -#define TIM_DMABurstLength_12Bytes ((uint16_t)0x0B00) -#define TIM_DMABurstLength_13Bytes ((uint16_t)0x0C00) -#define TIM_DMABurstLength_14Bytes ((uint16_t)0x0D00) -#define TIM_DMABurstLength_15Bytes ((uint16_t)0x0E00) -#define TIM_DMABurstLength_16Bytes ((uint16_t)0x0F00) -#define TIM_DMABurstLength_17Bytes ((uint16_t)0x1000) -#define TIM_DMABurstLength_18Bytes ((uint16_t)0x1100) -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABurstLength_1Byte) || \ - ((LENGTH) == TIM_DMABurstLength_2Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_3Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_4Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_5Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_6Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_7Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_8Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_9Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_10Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_11Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_12Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_13Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_14Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_15Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_16Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_17Bytes) || \ - ((LENGTH) == TIM_DMABurstLength_18Bytes)) -/** - * @} - */ - -/** @defgroup TIM_DMA_sources - * @{ - */ - -#define TIM_DMA_Update ((uint16_t)0x0100) -#define TIM_DMA_CC1 ((uint16_t)0x0200) -#define TIM_DMA_CC2 ((uint16_t)0x0400) -#define TIM_DMA_CC3 ((uint16_t)0x0800) -#define TIM_DMA_CC4 ((uint16_t)0x1000) -#define TIM_DMA_COM ((uint16_t)0x2000) -#define TIM_DMA_Trigger ((uint16_t)0x4000) -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0x80FF) == 0x0000) && ((SOURCE) != 0x0000)) - -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Prescaler - * @{ - */ - -#define TIM_ExtTRGPSC_OFF ((uint16_t)0x0000) -#define TIM_ExtTRGPSC_DIV2 ((uint16_t)0x1000) -#define TIM_ExtTRGPSC_DIV4 ((uint16_t)0x2000) -#define TIM_ExtTRGPSC_DIV8 ((uint16_t)0x3000) -#define IS_TIM_EXT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ExtTRGPSC_OFF) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV2) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV4) || \ - ((PRESCALER) == TIM_ExtTRGPSC_DIV8)) -/** - * @} - */ - -/** @defgroup TIM_Internal_Trigger_Selection - * @{ - */ - -#define TIM_TS_ITR0 ((uint16_t)0x0000) -#define TIM_TS_ITR1 ((uint16_t)0x0010) -#define TIM_TS_ITR2 ((uint16_t)0x0020) -#define TIM_TS_ITR3 ((uint16_t)0x0030) -#define TIM_TS_TI1F_ED ((uint16_t)0x0040) -#define TIM_TS_TI1FP1 ((uint16_t)0x0050) -#define TIM_TS_TI2FP2 ((uint16_t)0x0060) -#define TIM_TS_ETRF ((uint16_t)0x0070) -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) -#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3)) -/** - * @} - */ - -/** @defgroup TIM_TIx_External_Clock_Source - * @{ - */ - -#define TIM_TIxExternalCLK1Source_TI1 ((uint16_t)0x0050) -#define TIM_TIxExternalCLK1Source_TI2 ((uint16_t)0x0060) -#define TIM_TIxExternalCLK1Source_TI1ED ((uint16_t)0x0040) -#define IS_TIM_TIXCLK_SOURCE(SOURCE) (((SOURCE) == TIM_TIxExternalCLK1Source_TI1) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI2) || \ - ((SOURCE) == TIM_TIxExternalCLK1Source_TI1ED)) -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Polarity - * @{ - */ -#define TIM_ExtTRGPolarity_Inverted ((uint16_t)0x8000) -#define TIM_ExtTRGPolarity_NonInverted ((uint16_t)0x0000) -#define IS_TIM_EXT_POLARITY(POLARITY) (((POLARITY) == TIM_ExtTRGPolarity_Inverted) || \ - ((POLARITY) == TIM_ExtTRGPolarity_NonInverted)) -/** - * @} - */ - -/** @defgroup TIM_Prescaler_Reload_Mode - * @{ - */ - -#define TIM_PSCReloadMode_Update ((uint16_t)0x0000) -#define TIM_PSCReloadMode_Immediate ((uint16_t)0x0001) -#define IS_TIM_PRESCALER_RELOAD(RELOAD) (((RELOAD) == TIM_PSCReloadMode_Update) || \ - ((RELOAD) == TIM_PSCReloadMode_Immediate)) -/** - * @} - */ - -/** @defgroup TIM_Forced_Action - * @{ - */ - -#define TIM_ForcedAction_Active ((uint16_t)0x0050) -#define TIM_ForcedAction_InActive ((uint16_t)0x0040) -#define IS_TIM_FORCED_ACTION(ACTION) (((ACTION) == TIM_ForcedAction_Active) || \ - ((ACTION) == TIM_ForcedAction_InActive)) -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode - * @{ - */ - -#define TIM_EncoderMode_TI1 ((uint16_t)0x0001) -#define TIM_EncoderMode_TI2 ((uint16_t)0x0002) -#define TIM_EncoderMode_TI12 ((uint16_t)0x0003) -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_EncoderMode_TI1) || \ - ((MODE) == TIM_EncoderMode_TI2) || \ - ((MODE) == TIM_EncoderMode_TI12)) -/** - * @} - */ - - -/** @defgroup TIM_Event_Source - * @{ - */ - -#define TIM_EventSource_Update ((uint16_t)0x0001) -#define TIM_EventSource_CC1 ((uint16_t)0x0002) -#define TIM_EventSource_CC2 ((uint16_t)0x0004) -#define TIM_EventSource_CC3 ((uint16_t)0x0008) -#define TIM_EventSource_CC4 ((uint16_t)0x0010) -#define TIM_EventSource_COM ((uint16_t)0x0020) -#define TIM_EventSource_Trigger ((uint16_t)0x0040) -#define TIM_EventSource_Break ((uint16_t)0x0080) -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & (uint16_t)0xFF00) == 0x0000) && ((SOURCE) != 0x0000)) - -/** - * @} - */ - -/** @defgroup TIM_Update_Source - * @{ - */ - -#define TIM_UpdateSource_Global ((uint16_t)0x0000) /*!< Source of update is the counter overflow/underflow - or the setting of UG bit, or an update generation - through the slave mode controller. */ -#define TIM_UpdateSource_Regular ((uint16_t)0x0001) /*!< Source of update is counter overflow/underflow. */ -#define IS_TIM_UPDATE_SOURCE(SOURCE) (((SOURCE) == TIM_UpdateSource_Global) || \ - ((SOURCE) == TIM_UpdateSource_Regular)) -/** - * @} - */ - -/** @defgroup TIM_Ouput_Compare_Preload_State - * @{ - */ - -#define TIM_OCPreload_Enable ((uint16_t)0x0008) -#define TIM_OCPreload_Disable ((uint16_t)0x0000) -#define IS_TIM_OCPRELOAD_STATE(STATE) (((STATE) == TIM_OCPreload_Enable) || \ - ((STATE) == TIM_OCPreload_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Ouput_Compare_Fast_State - * @{ - */ - -#define TIM_OCFast_Enable ((uint16_t)0x0004) -#define TIM_OCFast_Disable ((uint16_t)0x0000) -#define IS_TIM_OCFAST_STATE(STATE) (((STATE) == TIM_OCFast_Enable) || \ - ((STATE) == TIM_OCFast_Disable)) - -/** - * @} - */ - -/** @defgroup TIM_Ouput_Compare_Clear_State - * @{ - */ - -#define TIM_OCClear_Enable ((uint16_t)0x0080) -#define TIM_OCClear_Disable ((uint16_t)0x0000) -#define IS_TIM_OCCLEAR_STATE(STATE) (((STATE) == TIM_OCClear_Enable) || \ - ((STATE) == TIM_OCClear_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Output_Source - * @{ - */ - -#define TIM_TRGOSource_Reset ((uint16_t)0x0000) -#define TIM_TRGOSource_Enable ((uint16_t)0x0010) -#define TIM_TRGOSource_Update ((uint16_t)0x0020) -#define TIM_TRGOSource_OC1 ((uint16_t)0x0030) -#define TIM_TRGOSource_OC1Ref ((uint16_t)0x0040) -#define TIM_TRGOSource_OC2Ref ((uint16_t)0x0050) -#define TIM_TRGOSource_OC3Ref ((uint16_t)0x0060) -#define TIM_TRGOSource_OC4Ref ((uint16_t)0x0070) -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGOSource_Reset) || \ - ((SOURCE) == TIM_TRGOSource_Enable) || \ - ((SOURCE) == TIM_TRGOSource_Update) || \ - ((SOURCE) == TIM_TRGOSource_OC1) || \ - ((SOURCE) == TIM_TRGOSource_OC1Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC2Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC3Ref) || \ - ((SOURCE) == TIM_TRGOSource_OC4Ref)) -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode - * @{ - */ - -#define TIM_SlaveMode_Reset ((uint16_t)0x0004) -#define TIM_SlaveMode_Gated ((uint16_t)0x0005) -#define TIM_SlaveMode_Trigger ((uint16_t)0x0006) -#define TIM_SlaveMode_External1 ((uint16_t)0x0007) -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SlaveMode_Reset) || \ - ((MODE) == TIM_SlaveMode_Gated) || \ - ((MODE) == TIM_SlaveMode_Trigger) || \ - ((MODE) == TIM_SlaveMode_External1)) -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode - * @{ - */ - -#define TIM_MasterSlaveMode_Enable ((uint16_t)0x0080) -#define TIM_MasterSlaveMode_Disable ((uint16_t)0x0000) -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MasterSlaveMode_Enable) || \ - ((STATE) == TIM_MasterSlaveMode_Disable)) -/** - * @} - */ - -/** @defgroup TIM_Flags - * @{ - */ - -#define TIM_FLAG_Update ((uint16_t)0x0001) -#define TIM_FLAG_CC1 ((uint16_t)0x0002) -#define TIM_FLAG_CC2 ((uint16_t)0x0004) -#define TIM_FLAG_CC3 ((uint16_t)0x0008) -#define TIM_FLAG_CC4 ((uint16_t)0x0010) -#define TIM_FLAG_COM ((uint16_t)0x0020) -#define TIM_FLAG_Trigger ((uint16_t)0x0040) -#define TIM_FLAG_Break ((uint16_t)0x0080) -#define TIM_FLAG_CC1OF ((uint16_t)0x0200) -#define TIM_FLAG_CC2OF ((uint16_t)0x0400) -#define TIM_FLAG_CC3OF ((uint16_t)0x0800) -#define TIM_FLAG_CC4OF ((uint16_t)0x1000) -#define IS_TIM_GET_FLAG(FLAG) (((FLAG) == TIM_FLAG_Update) || \ - ((FLAG) == TIM_FLAG_CC1) || \ - ((FLAG) == TIM_FLAG_CC2) || \ - ((FLAG) == TIM_FLAG_CC3) || \ - ((FLAG) == TIM_FLAG_CC4) || \ - ((FLAG) == TIM_FLAG_COM) || \ - ((FLAG) == TIM_FLAG_Trigger) || \ - ((FLAG) == TIM_FLAG_Break) || \ - ((FLAG) == TIM_FLAG_CC1OF) || \ - ((FLAG) == TIM_FLAG_CC2OF) || \ - ((FLAG) == TIM_FLAG_CC3OF) || \ - ((FLAG) == TIM_FLAG_CC4OF)) - - -#define IS_TIM_CLEAR_FLAG(TIM_FLAG) ((((TIM_FLAG) & (uint16_t)0xE100) == 0x0000) && ((TIM_FLAG) != 0x0000)) -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Filer_Value - * @{ - */ - -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) -/** - * @} - */ - -/** @defgroup TIM_External_Trigger_Filter - * @{ - */ - -#define IS_TIM_EXT_FILTER(EXTFILTER) ((EXTFILTER) <= 0xF) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Exported_Functions - * @{ - */ - -void TIM_DeInit(TIM_TypeDef* TIMx); -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct); -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct); -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct); -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct); -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct); -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState); -void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource); -void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength); -void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState); -void TIM_InternalClockConfig(TIM_TypeDef* TIMx); -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, - uint16_t TIM_ICPolarity, uint16_t ICFilter); -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter); -void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter); -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode); -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode); -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource); -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, - uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity); -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction); -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload); -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast); -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear); -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity); -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity); -void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx); -void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN); -void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode); -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource); -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState); -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode); -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource); -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode); -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode); -void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter); -void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload); -void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1); -void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2); -void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3); -void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4); -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC); -void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD); -uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx); -uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx); -uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx); -uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx); -uint16_t TIM_GetCounter(TIM_TypeDef* TIMx); -uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx); -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); -void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG); -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT); -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT); - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F10x_TIM_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h deleted file mode 100644 index 976a06c62..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_usart.h +++ /dev/null @@ -1,409 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_usart.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the USART - * firmware library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_USART_H -#define __STM32F10x_USART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup USART - * @{ - */ - -/** @defgroup USART_Exported_Types - * @{ - */ - -/** - * @brief USART Init Structure definition - */ - -typedef struct -{ - uint32_t USART_BaudRate; /*!< This member configures the USART communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (16 * (USART_InitStruct->USART_BaudRate))) - - FractionalDivider = ((IntegerDivider - ((u32) IntegerDivider)) * 16) + 0.5 */ - - uint16_t USART_WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref USART_Word_Length */ - - uint16_t USART_StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref USART_Stop_Bits */ - - uint16_t USART_Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref USART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint16_t USART_Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref USART_Mode */ - - uint16_t USART_HardwareFlowControl; /*!< Specifies wether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref USART_Hardware_Flow_Control */ -} USART_InitTypeDef; - -/** - * @brief USART Clock Init Structure definition - */ - -typedef struct -{ - - uint16_t USART_Clock; /*!< Specifies whether the USART clock is enabled or disabled. - This parameter can be a value of @ref USART_Clock */ - - uint16_t USART_CPOL; /*!< Specifies the steady state value of the serial clock. - This parameter can be a value of @ref USART_Clock_Polarity */ - - uint16_t USART_CPHA; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref USART_Clock_Phase */ - - uint16_t USART_LastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref USART_Last_Bit */ -} USART_ClockInitTypeDef; - -/** - * @} - */ - -/** @defgroup USART_Exported_Constants - * @{ - */ - -#define IS_USART_ALL_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4) || \ - ((PERIPH) == UART5)) - -#define IS_USART_123_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3)) - -#define IS_USART_1234_PERIPH(PERIPH) (((PERIPH) == USART1) || \ - ((PERIPH) == USART2) || \ - ((PERIPH) == USART3) || \ - ((PERIPH) == UART4)) -/** @defgroup USART_Word_Length - * @{ - */ - -#define USART_WordLength_8b ((uint16_t)0x0000) -#define USART_WordLength_9b ((uint16_t)0x1000) - -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WordLength_8b) || \ - ((LENGTH) == USART_WordLength_9b)) -/** - * @} - */ - -/** @defgroup USART_Stop_Bits - * @{ - */ - -#define USART_StopBits_1 ((uint16_t)0x0000) -#define USART_StopBits_0_5 ((uint16_t)0x1000) -#define USART_StopBits_2 ((uint16_t)0x2000) -#define USART_StopBits_1_5 ((uint16_t)0x3000) -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_StopBits_1) || \ - ((STOPBITS) == USART_StopBits_0_5) || \ - ((STOPBITS) == USART_StopBits_2) || \ - ((STOPBITS) == USART_StopBits_1_5)) -/** - * @} - */ - -/** @defgroup USART_Parity - * @{ - */ - -#define USART_Parity_No ((uint16_t)0x0000) -#define USART_Parity_Even ((uint16_t)0x0400) -#define USART_Parity_Odd ((uint16_t)0x0600) -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_Parity_No) || \ - ((PARITY) == USART_Parity_Even) || \ - ((PARITY) == USART_Parity_Odd)) -/** - * @} - */ - -/** @defgroup USART_Mode - * @{ - */ - -#define USART_Mode_Rx ((uint16_t)0x0004) -#define USART_Mode_Tx ((uint16_t)0x0008) -#define IS_USART_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00)) -/** - * @} - */ - -/** @defgroup USART_Hardware_Flow_Control - * @{ - */ -#define USART_HardwareFlowControl_None ((uint16_t)0x0000) -#define USART_HardwareFlowControl_RTS ((uint16_t)0x0100) -#define USART_HardwareFlowControl_CTS ((uint16_t)0x0200) -#define USART_HardwareFlowControl_RTS_CTS ((uint16_t)0x0300) -#define IS_USART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == USART_HardwareFlowControl_None) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS) || \ - ((CONTROL) == USART_HardwareFlowControl_CTS) || \ - ((CONTROL) == USART_HardwareFlowControl_RTS_CTS)) -/** - * @} - */ - -/** @defgroup USART_Clock - * @{ - */ -#define USART_Clock_Disable ((uint16_t)0x0000) -#define USART_Clock_Enable ((uint16_t)0x0800) -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_Clock_Disable) || \ - ((CLOCK) == USART_Clock_Enable)) -/** - * @} - */ - -/** @defgroup USART_Clock_Polarity - * @{ - */ - -#define USART_CPOL_Low ((uint16_t)0x0000) -#define USART_CPOL_High ((uint16_t)0x0400) -#define IS_USART_CPOL(CPOL) (((CPOL) == USART_CPOL_Low) || ((CPOL) == USART_CPOL_High)) - -/** - * @} - */ - -/** @defgroup USART_Clock_Phase - * @{ - */ - -#define USART_CPHA_1Edge ((uint16_t)0x0000) -#define USART_CPHA_2Edge ((uint16_t)0x0200) -#define IS_USART_CPHA(CPHA) (((CPHA) == USART_CPHA_1Edge) || ((CPHA) == USART_CPHA_2Edge)) - -/** - * @} - */ - -/** @defgroup USART_Last_Bit - * @{ - */ - -#define USART_LastBit_Disable ((uint16_t)0x0000) -#define USART_LastBit_Enable ((uint16_t)0x0100) -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LastBit_Disable) || \ - ((LASTBIT) == USART_LastBit_Enable)) -/** - * @} - */ - -/** @defgroup USART_Interrupt_definition - * @{ - */ - -#define USART_IT_PE ((uint16_t)0x0028) -#define USART_IT_TXE ((uint16_t)0x0727) -#define USART_IT_TC ((uint16_t)0x0626) -#define USART_IT_RXNE ((uint16_t)0x0525) -#define USART_IT_IDLE ((uint16_t)0x0424) -#define USART_IT_LBD ((uint16_t)0x0846) -#define USART_IT_CTS ((uint16_t)0x096A) -#define USART_IT_ERR ((uint16_t)0x0060) -#define USART_IT_ORE ((uint16_t)0x0360) -#define USART_IT_NE ((uint16_t)0x0260) -#define USART_IT_FE ((uint16_t)0x0160) -#define IS_USART_CONFIG_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ERR)) -#define IS_USART_GET_IT(IT) (((IT) == USART_IT_PE) || ((IT) == USART_IT_TXE) || \ - ((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_IDLE) || ((IT) == USART_IT_LBD) || \ - ((IT) == USART_IT_CTS) || ((IT) == USART_IT_ORE) || \ - ((IT) == USART_IT_NE) || ((IT) == USART_IT_FE)) -#define IS_USART_CLEAR_IT(IT) (((IT) == USART_IT_TC) || ((IT) == USART_IT_RXNE) || \ - ((IT) == USART_IT_LBD) || ((IT) == USART_IT_CTS)) -/** - * @} - */ - -/** @defgroup USART_DMA_Requests - * @{ - */ - -#define USART_DMAReq_Tx ((uint16_t)0x0080) -#define USART_DMAReq_Rx ((uint16_t)0x0040) -#define IS_USART_DMAREQ(DMAREQ) ((((DMAREQ) & (uint16_t)0xFF3F) == 0x00) && ((DMAREQ) != (uint16_t)0x00)) - -/** - * @} - */ - -/** @defgroup USART_WakeUp_methods - * @{ - */ - -#define USART_WakeUp_IdleLine ((uint16_t)0x0000) -#define USART_WakeUp_AddressMark ((uint16_t)0x0800) -#define IS_USART_WAKEUP(WAKEUP) (((WAKEUP) == USART_WakeUp_IdleLine) || \ - ((WAKEUP) == USART_WakeUp_AddressMark)) -/** - * @} - */ - -/** @defgroup USART_LIN_Break_Detection_Length - * @{ - */ - -#define USART_LINBreakDetectLength_10b ((uint16_t)0x0000) -#define USART_LINBreakDetectLength_11b ((uint16_t)0x0020) -#define IS_USART_LIN_BREAK_DETECT_LENGTH(LENGTH) \ - (((LENGTH) == USART_LINBreakDetectLength_10b) || \ - ((LENGTH) == USART_LINBreakDetectLength_11b)) -/** - * @} - */ - -/** @defgroup USART_IrDA_Low_Power - * @{ - */ - -#define USART_IrDAMode_LowPower ((uint16_t)0x0004) -#define USART_IrDAMode_Normal ((uint16_t)0x0000) -#define IS_USART_IRDA_MODE(MODE) (((MODE) == USART_IrDAMode_LowPower) || \ - ((MODE) == USART_IrDAMode_Normal)) -/** - * @} - */ - -/** @defgroup USART_Flags - * @{ - */ - -#define USART_FLAG_CTS ((uint16_t)0x0200) -#define USART_FLAG_LBD ((uint16_t)0x0100) -#define USART_FLAG_TXE ((uint16_t)0x0080) -#define USART_FLAG_TC ((uint16_t)0x0040) -#define USART_FLAG_RXNE ((uint16_t)0x0020) -#define USART_FLAG_IDLE ((uint16_t)0x0010) -#define USART_FLAG_ORE ((uint16_t)0x0008) -#define USART_FLAG_NE ((uint16_t)0x0004) -#define USART_FLAG_FE ((uint16_t)0x0002) -#define USART_FLAG_PE ((uint16_t)0x0001) -#define IS_USART_FLAG(FLAG) (((FLAG) == USART_FLAG_PE) || ((FLAG) == USART_FLAG_TXE) || \ - ((FLAG) == USART_FLAG_TC) || ((FLAG) == USART_FLAG_RXNE) || \ - ((FLAG) == USART_FLAG_IDLE) || ((FLAG) == USART_FLAG_LBD) || \ - ((FLAG) == USART_FLAG_CTS) || ((FLAG) == USART_FLAG_ORE) || \ - ((FLAG) == USART_FLAG_NE) || ((FLAG) == USART_FLAG_FE)) - -#define IS_USART_CLEAR_FLAG(FLAG) ((((FLAG) & (uint16_t)0xFC9F) == 0x00) && ((FLAG) != (uint16_t)0x00)) -#define IS_USART_PERIPH_FLAG(PERIPH, USART_FLAG) ((((*(uint32_t*)&(PERIPH)) != UART4_BASE) &&\ - ((*(uint32_t*)&(PERIPH)) != UART5_BASE)) \ - || ((USART_FLAG) != USART_FLAG_CTS)) -#define IS_USART_BAUDRATE(BAUDRATE) (((BAUDRATE) > 0) && ((BAUDRATE) < 0x0044AA21)) -#define IS_USART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) -#define IS_USART_DATA(DATA) ((DATA) <= 0x1FF) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup USART_Exported_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Exported_Functions - * @{ - */ - -void USART_DeInit(USART_TypeDef* USARTx); -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct); -void USART_StructInit(USART_InitTypeDef* USART_InitStruct); -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct); -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState); -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState); -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address); -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp); -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength); -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data); -uint16_t USART_ReceiveData(USART_TypeDef* USARTx); -void USART_SendBreak(USART_TypeDef* USARTx); -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime); -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler); -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState); -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode); -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState); -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG); -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG); -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT); -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_USART_H */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h deleted file mode 100644 index 39dc8e9a3..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/inc/stm32f10x_wwdg.h +++ /dev/null @@ -1,114 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_wwdg.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains all the functions prototypes for the WWDG firmware - * library. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_WWDG_H -#define __STM32F10x_WWDG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @addtogroup WWDG - * @{ - */ - -/** @defgroup WWDG_Exported_Types - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Exported_Constants - * @{ - */ - -/** @defgroup WWDG_Prescaler - * @{ - */ - -#define WWDG_Prescaler_1 ((uint32_t)0x00000000) -#define WWDG_Prescaler_2 ((uint32_t)0x00000080) -#define WWDG_Prescaler_4 ((uint32_t)0x00000100) -#define WWDG_Prescaler_8 ((uint32_t)0x00000180) -#define IS_WWDG_PRESCALER(PRESCALER) (((PRESCALER) == WWDG_Prescaler_1) || \ - ((PRESCALER) == WWDG_Prescaler_2) || \ - ((PRESCALER) == WWDG_Prescaler_4) || \ - ((PRESCALER) == WWDG_Prescaler_8)) -#define IS_WWDG_WINDOW_VALUE(VALUE) ((VALUE) <= 0x7F) -#define IS_WWDG_COUNTER(COUNTER) (((COUNTER) >= 0x40) && ((COUNTER) <= 0x7F)) - -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup WWDG_Exported_Macros - * @{ - */ -/** - * @} - */ - -/** @defgroup WWDG_Exported_Functions - * @{ - */ - -void WWDG_DeInit(void); -void WWDG_SetPrescaler(uint32_t WWDG_Prescaler); -void WWDG_SetWindowValue(uint8_t WindowValue); -void WWDG_EnableIT(void); -void WWDG_SetCounter(uint8_t Counter); -void WWDG_Enable(uint8_t Counter); -FlagStatus WWDG_GetFlagStatus(void); -void WWDG_ClearFlag(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_WWDG_H */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c deleted file mode 100644 index 03cdb41fe..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/misc.c +++ /dev/null @@ -1,223 +0,0 @@ -/** - ****************************************************************************** - * @file misc.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the miscellaneous firmware functions (add-on - * to CMSIS functions). - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "misc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup MISC - * @brief MISC driver modules - * @{ - */ - -/** @defgroup MISC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_Defines - * @{ - */ - -#define AIRCR_VECTKEY_MASK ((uint32_t)0x05FA0000) -/** - * @} - */ - -/** @defgroup MISC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup MISC_Private_Functions - * @{ - */ - -/** - * @brief Configures the priority grouping: pre-emption priority and subpriority. - * @param NVIC_PriorityGroup: specifies the priority grouping bits length. - * This parameter can be one of the following values: - * @arg NVIC_PriorityGroup_0: 0 bits for pre-emption priority - * 4 bits for subpriority - * @arg NVIC_PriorityGroup_1: 1 bits for pre-emption priority - * 3 bits for subpriority - * @arg NVIC_PriorityGroup_2: 2 bits for pre-emption priority - * 2 bits for subpriority - * @arg NVIC_PriorityGroup_3: 3 bits for pre-emption priority - * 1 bits for subpriority - * @arg NVIC_PriorityGroup_4: 4 bits for pre-emption priority - * 0 bits for subpriority - * @retval None - */ -void NVIC_PriorityGroupConfig(uint32_t NVIC_PriorityGroup) -{ - /* Check the parameters */ - assert_param(IS_NVIC_PRIORITY_GROUP(NVIC_PriorityGroup)); - - /* Set the PRIGROUP[10:8] bits according to NVIC_PriorityGroup value */ - SCB->AIRCR = AIRCR_VECTKEY_MASK | NVIC_PriorityGroup; -} - -/** - * @brief Initializes the NVIC peripheral according to the specified - * parameters in the NVIC_InitStruct. - * @param NVIC_InitStruct: pointer to a NVIC_InitTypeDef structure that contains - * the configuration information for the specified NVIC peripheral. - * @retval None - */ -void NVIC_Init(NVIC_InitTypeDef* NVIC_InitStruct) -{ - uint32_t tmppriority = 0x00, tmppre = 0x00, tmpsub = 0x0F; - - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NVIC_InitStruct->NVIC_IRQChannelCmd)); - assert_param(IS_NVIC_PREEMPTION_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority)); - assert_param(IS_NVIC_SUB_PRIORITY(NVIC_InitStruct->NVIC_IRQChannelSubPriority)); - - if (NVIC_InitStruct->NVIC_IRQChannelCmd != DISABLE) - { - /* Compute the Corresponding IRQ Priority --------------------------------*/ - tmppriority = (0x700 - ((SCB->AIRCR) & (uint32_t)0x700))>> 0x08; - tmppre = (0x4 - tmppriority); - tmpsub = tmpsub >> tmppriority; - - tmppriority = (uint32_t)NVIC_InitStruct->NVIC_IRQChannelPreemptionPriority << tmppre; - tmppriority |= NVIC_InitStruct->NVIC_IRQChannelSubPriority & tmpsub; - tmppriority = tmppriority << 0x04; - - NVIC->IP[NVIC_InitStruct->NVIC_IRQChannel] = tmppriority; - - /* Enable the Selected IRQ Channels --------------------------------------*/ - NVIC->ISER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = - (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); - } - else - { - /* Disable the Selected IRQ Channels -------------------------------------*/ - NVIC->ICER[NVIC_InitStruct->NVIC_IRQChannel >> 0x05] = - (uint32_t)0x01 << (NVIC_InitStruct->NVIC_IRQChannel & (uint8_t)0x1F); - } -} - -/** - * @brief Sets the vector table location and Offset. - * @param NVIC_VectTab: specifies if the vector table is in RAM or FLASH memory. - * This parameter can be one of the following values: - * @arg NVIC_VectTab_RAM - * @arg NVIC_VectTab_FLASH - * @param Offset: Vector Table base offset field. This value must be a multiple of 0x100. - * @retval None - */ -void NVIC_SetVectorTable(uint32_t NVIC_VectTab, uint32_t Offset) -{ - /* Check the parameters */ - assert_param(IS_NVIC_VECTTAB(NVIC_VectTab)); - assert_param(IS_NVIC_OFFSET(Offset)); - - SCB->VTOR = NVIC_VectTab | (Offset & (uint32_t)0x1FFFFF80); -} - -/** - * @brief Selects the condition for the system to enter low power mode. - * @param LowPowerMode: Specifies the new mode for the system to enter low power mode. - * This parameter can be one of the following values: - * @arg NVIC_LP_SEVONPEND - * @arg NVIC_LP_SLEEPDEEP - * @arg NVIC_LP_SLEEPONEXIT - * @param NewState: new state of LP condition. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void NVIC_SystemLPConfig(uint8_t LowPowerMode, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_NVIC_LP(LowPowerMode)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - SCB->SCR |= LowPowerMode; - } - else - { - SCB->SCR &= (uint32_t)(~(uint32_t)LowPowerMode); - } -} - -/** - * @brief Configures the SysTick clock source. - * @param SysTick_CLKSource: specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SysTick_CLKSource_HCLK_Div8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SysTick_CLKSource_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -void SysTick_CLKSourceConfig(uint32_t SysTick_CLKSource) -{ - /* Check the parameters */ - assert_param(IS_SYSTICK_CLK_SOURCE(SysTick_CLKSource)); - if (SysTick_CLKSource == SysTick_CLKSource_HCLK) - { - SysTick->CTRL |= SysTick_CLKSource_HCLK; - } - else - { - SysTick->CTRL &= SysTick_CLKSource_HCLK_Div8; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c deleted file mode 100644 index 882455d4e..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_adc.c +++ /dev/null @@ -1,1306 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_adc.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the ADC firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_adc.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup ADC - * @brief ADC driver modules - * @{ - */ - -/** @defgroup ADC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup ADC_Private_Defines - * @{ - */ - -/* ADC DISCNUM mask */ -#define CR1_DISCNUM_Reset ((uint32_t)0xFFFF1FFF) - -/* ADC DISCEN mask */ -#define CR1_DISCEN_Set ((uint32_t)0x00000800) -#define CR1_DISCEN_Reset ((uint32_t)0xFFFFF7FF) - -/* ADC JAUTO mask */ -#define CR1_JAUTO_Set ((uint32_t)0x00000400) -#define CR1_JAUTO_Reset ((uint32_t)0xFFFFFBFF) - -/* ADC JDISCEN mask */ -#define CR1_JDISCEN_Set ((uint32_t)0x00001000) -#define CR1_JDISCEN_Reset ((uint32_t)0xFFFFEFFF) - -/* ADC AWDCH mask */ -#define CR1_AWDCH_Reset ((uint32_t)0xFFFFFFE0) - -/* ADC Analog watchdog enable mode mask */ -#define CR1_AWDMode_Reset ((uint32_t)0xFF3FFDFF) - -/* CR1 register Mask */ -#define CR1_CLEAR_Mask ((uint32_t)0xFFF0FEFF) - -/* ADC ADON mask */ -#define CR2_ADON_Set ((uint32_t)0x00000001) -#define CR2_ADON_Reset ((uint32_t)0xFFFFFFFE) - -/* ADC DMA mask */ -#define CR2_DMA_Set ((uint32_t)0x00000100) -#define CR2_DMA_Reset ((uint32_t)0xFFFFFEFF) - -/* ADC RSTCAL mask */ -#define CR2_RSTCAL_Set ((uint32_t)0x00000008) - -/* ADC CAL mask */ -#define CR2_CAL_Set ((uint32_t)0x00000004) - -/* ADC SWSTART mask */ -#define CR2_SWSTART_Set ((uint32_t)0x00400000) - -/* ADC EXTTRIG mask */ -#define CR2_EXTTRIG_Set ((uint32_t)0x00100000) -#define CR2_EXTTRIG_Reset ((uint32_t)0xFFEFFFFF) - -/* ADC Software start mask */ -#define CR2_EXTTRIG_SWSTART_Set ((uint32_t)0x00500000) -#define CR2_EXTTRIG_SWSTART_Reset ((uint32_t)0xFFAFFFFF) - -/* ADC JEXTSEL mask */ -#define CR2_JEXTSEL_Reset ((uint32_t)0xFFFF8FFF) - -/* ADC JEXTTRIG mask */ -#define CR2_JEXTTRIG_Set ((uint32_t)0x00008000) -#define CR2_JEXTTRIG_Reset ((uint32_t)0xFFFF7FFF) - -/* ADC JSWSTART mask */ -#define CR2_JSWSTART_Set ((uint32_t)0x00200000) - -/* ADC injected software start mask */ -#define CR2_JEXTTRIG_JSWSTART_Set ((uint32_t)0x00208000) -#define CR2_JEXTTRIG_JSWSTART_Reset ((uint32_t)0xFFDF7FFF) - -/* ADC TSPD mask */ -#define CR2_TSVREFE_Set ((uint32_t)0x00800000) -#define CR2_TSVREFE_Reset ((uint32_t)0xFF7FFFFF) - -/* CR2 register Mask */ -#define CR2_CLEAR_Mask ((uint32_t)0xFFF1F7FD) - -/* ADC SQx mask */ -#define SQR3_SQ_Set ((uint32_t)0x0000001F) -#define SQR2_SQ_Set ((uint32_t)0x0000001F) -#define SQR1_SQ_Set ((uint32_t)0x0000001F) - -/* SQR1 register Mask */ -#define SQR1_CLEAR_Mask ((uint32_t)0xFF0FFFFF) - -/* ADC JSQx mask */ -#define JSQR_JSQ_Set ((uint32_t)0x0000001F) - -/* ADC JL mask */ -#define JSQR_JL_Set ((uint32_t)0x00300000) -#define JSQR_JL_Reset ((uint32_t)0xFFCFFFFF) - -/* ADC SMPx mask */ -#define SMPR1_SMP_Set ((uint32_t)0x00000007) -#define SMPR2_SMP_Set ((uint32_t)0x00000007) - -/* ADC JDRx registers offset */ -#define JDR_Offset ((uint8_t)0x28) - -/* ADC1 DR register base address */ -#define DR_ADDRESS ((uint32_t)0x4001244C) - -/** - * @} - */ - -/** @defgroup ADC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup ADC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup ADC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup ADC_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the ADCx peripheral registers to their default reset values. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval None - */ -void ADC_DeInit(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - - if (ADCx == ADC1) - { - /* Enable ADC1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, ENABLE); - /* Release ADC1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC1, DISABLE); - } - else if (ADCx == ADC2) - { - /* Enable ADC2 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, ENABLE); - /* Release ADC2 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC2, DISABLE); - } - else - { - if (ADCx == ADC3) - { - /* Enable ADC3 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, ENABLE); - /* Release ADC3 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_ADC3, DISABLE); - } - } -} - -/** - * @brief Initializes the ADCx peripheral according to the specified parameters - * in the ADC_InitStruct. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_InitStruct: pointer to an ADC_InitTypeDef structure that contains - * the configuration information for the specified ADC peripheral. - * @retval None - */ -void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct) -{ - uint32_t tmpreg1 = 0; - uint8_t tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_MODE(ADC_InitStruct->ADC_Mode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ScanConvMode)); - assert_param(IS_FUNCTIONAL_STATE(ADC_InitStruct->ADC_ContinuousConvMode)); - assert_param(IS_ADC_EXT_TRIG(ADC_InitStruct->ADC_ExternalTrigConv)); - assert_param(IS_ADC_DATA_ALIGN(ADC_InitStruct->ADC_DataAlign)); - assert_param(IS_ADC_REGULAR_LENGTH(ADC_InitStruct->ADC_NbrOfChannel)); - - /*---------------------------- ADCx CR1 Configuration -----------------*/ - /* Get the ADCx CR1 value */ - tmpreg1 = ADCx->CR1; - /* Clear DUALMOD and SCAN bits */ - tmpreg1 &= CR1_CLEAR_Mask; - /* Configure ADCx: Dual mode and scan conversion mode */ - /* Set DUALMOD bits according to ADC_Mode value */ - /* Set SCAN bit according to ADC_ScanConvMode value */ - tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_Mode | ((uint32_t)ADC_InitStruct->ADC_ScanConvMode << 8)); - /* Write to ADCx CR1 */ - ADCx->CR1 = tmpreg1; - - /*---------------------------- ADCx CR2 Configuration -----------------*/ - /* Get the ADCx CR2 value */ - tmpreg1 = ADCx->CR2; - /* Clear CONT, ALIGN and EXTSEL bits */ - tmpreg1 &= CR2_CLEAR_Mask; - /* Configure ADCx: external trigger event and continuous conversion mode */ - /* Set ALIGN bit according to ADC_DataAlign value */ - /* Set EXTSEL bits according to ADC_ExternalTrigConv value */ - /* Set CONT bit according to ADC_ContinuousConvMode value */ - tmpreg1 |= (uint32_t)(ADC_InitStruct->ADC_DataAlign | ADC_InitStruct->ADC_ExternalTrigConv | - ((uint32_t)ADC_InitStruct->ADC_ContinuousConvMode << 1)); - /* Write to ADCx CR2 */ - ADCx->CR2 = tmpreg1; - - /*---------------------------- ADCx SQR1 Configuration -----------------*/ - /* Get the ADCx SQR1 value */ - tmpreg1 = ADCx->SQR1; - /* Clear L bits */ - tmpreg1 &= SQR1_CLEAR_Mask; - /* Configure ADCx: regular channel sequence length */ - /* Set L bits according to ADC_NbrOfChannel value */ - tmpreg2 |= (uint8_t) (ADC_InitStruct->ADC_NbrOfChannel - (uint8_t)1); - tmpreg1 |= (uint32_t)tmpreg2 << 20; - /* Write to ADCx SQR1 */ - ADCx->SQR1 = tmpreg1; -} - -/** - * @brief Fills each ADC_InitStruct member with its default value. - * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be initialized. - * @retval None - */ -void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct) -{ - /* Reset ADC init structure parameters values */ - /* Initialize the ADC_Mode member */ - ADC_InitStruct->ADC_Mode = ADC_Mode_Independent; - /* initialize the ADC_ScanConvMode member */ - ADC_InitStruct->ADC_ScanConvMode = DISABLE; - /* Initialize the ADC_ContinuousConvMode member */ - ADC_InitStruct->ADC_ContinuousConvMode = DISABLE; - /* Initialize the ADC_ExternalTrigConv member */ - ADC_InitStruct->ADC_ExternalTrigConv = ADC_ExternalTrigConv_T1_CC1; - /* Initialize the ADC_DataAlign member */ - ADC_InitStruct->ADC_DataAlign = ADC_DataAlign_Right; - /* Initialize the ADC_NbrOfChannel member */ - ADC_InitStruct->ADC_NbrOfChannel = 1; -} - -/** - * @brief Enables or disables the specified ADC peripheral. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the ADCx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the ADON bit to wake up the ADC from power down mode */ - ADCx->CR2 |= CR2_ADON_Set; - } - else - { - /* Disable the selected ADC peripheral */ - ADCx->CR2 &= CR2_ADON_Reset; - } -} - -/** - * @brief Enables or disables the specified ADC DMA request. - * @param ADCx: where x can be 1 or 3 to select the ADC peripheral. - * Note: ADC2 hasn't a DMA capability. - * @param NewState: new state of the selected ADC DMA transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_DMA_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC DMA request */ - ADCx->CR2 |= CR2_DMA_Set; - } - else - { - /* Disable the selected ADC DMA request */ - ADCx->CR2 &= CR2_DMA_Reset; - } -} - -/** - * @brief Enables or disables the specified ADC interrupts. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_IT: specifies the ADC interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg ADC_IT_EOC: End of conversion interrupt mask - * @arg ADC_IT_AWD: Analog watchdog interrupt mask - * @arg ADC_IT_JEOC: End of injected conversion interrupt mask - * @param NewState: new state of the specified ADC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_ITConfig(ADC_TypeDef* ADCx, uint16_t ADC_IT, FunctionalState NewState) -{ - uint8_t itmask = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_ADC_IT(ADC_IT)); - /* Get the ADC IT index */ - itmask = (uint8_t)ADC_IT; - if (NewState != DISABLE) - { - /* Enable the selected ADC interrupts */ - ADCx->CR1 |= itmask; - } - else - { - /* Disable the selected ADC interrupts */ - ADCx->CR1 &= (~(uint32_t)itmask); - } -} - -/** - * @brief Resets the selected ADC calibration registers. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval None - */ -void ADC_ResetCalibration(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Resets the selected ADC calibartion registers */ - ADCx->CR2 |= CR2_RSTCAL_Set; -} - -/** - * @brief Gets the selected ADC reset calibration registers status. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The new state of ADC reset calibration registers (SET or RESET). - */ -FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Check the status of RSTCAL bit */ - if ((ADCx->CR2 & CR2_RSTCAL_Set) != (uint32_t)RESET) - { - /* RSTCAL bit is set */ - bitstatus = SET; - } - else - { - /* RSTCAL bit is reset */ - bitstatus = RESET; - } - /* Return the RSTCAL bit status */ - return bitstatus; -} - -/** - * @brief Starts the selected ADC calibration process. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval None - */ -void ADC_StartCalibration(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Enable the selected ADC calibration process */ - ADCx->CR2 |= CR2_CAL_Set; -} - -/** - * @brief Gets the selected ADC calibration status. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The new state of ADC calibration (SET or RESET). - */ -FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Check the status of CAL bit */ - if ((ADCx->CR2 & CR2_CAL_Set) != (uint32_t)RESET) - { - /* CAL bit is set: calibration on going */ - bitstatus = SET; - } - else - { - /* CAL bit is reset: end of calibration */ - bitstatus = RESET; - } - /* Return the CAL bit status */ - return bitstatus; -} - -/** - * @brief Enables or disables the selected ADC software start conversion . - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC software start conversion. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion on external event and start the selected - ADC conversion */ - ADCx->CR2 |= CR2_EXTTRIG_SWSTART_Set; - } - else - { - /* Disable the selected ADC conversion on external event and stop the selected - ADC conversion */ - ADCx->CR2 &= CR2_EXTTRIG_SWSTART_Reset; - } -} - -/** - * @brief Gets the selected ADC Software start conversion Status. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The new state of ADC software start conversion (SET or RESET). - */ -FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Check the status of SWSTART bit */ - if ((ADCx->CR2 & CR2_SWSTART_Set) != (uint32_t)RESET) - { - /* SWSTART bit is set */ - bitstatus = SET; - } - else - { - /* SWSTART bit is reset */ - bitstatus = RESET; - } - /* Return the SWSTART bit status */ - return bitstatus; -} - -/** - * @brief Configures the discontinuous mode for the selected ADC regular - * group channel. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param Number: specifies the discontinuous mode regular channel - * count value. This number must be between 1 and 8. - * @retval None - */ -void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, uint8_t Number) -{ - uint32_t tmpreg1 = 0; - uint32_t tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_REGULAR_DISC_NUMBER(Number)); - /* Get the old register value */ - tmpreg1 = ADCx->CR1; - /* Clear the old discontinuous mode channel count */ - tmpreg1 &= CR1_DISCNUM_Reset; - /* Set the discontinuous mode channel count */ - tmpreg2 = Number - 1; - tmpreg1 |= tmpreg2 << 13; - /* Store the new register value */ - ADCx->CR1 = tmpreg1; -} - -/** - * @brief Enables or disables the discontinuous mode on regular group - * channel for the specified ADC - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC discontinuous mode - * on regular group channel. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC regular discontinuous mode */ - ADCx->CR1 |= CR1_DISCEN_Set; - } - else - { - /* Disable the selected ADC regular discontinuous mode */ - ADCx->CR1 &= CR1_DISCEN_Reset; - } -} - -/** - * @brief Configures for the selected ADC regular channel its corresponding - * rank in the sequencer and its sample time. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_Channel: the ADC channel to configure. - * This parameter can be one of the following values: - * @arg ADC_Channel_0: ADC Channel0 selected - * @arg ADC_Channel_1: ADC Channel1 selected - * @arg ADC_Channel_2: ADC Channel2 selected - * @arg ADC_Channel_3: ADC Channel3 selected - * @arg ADC_Channel_4: ADC Channel4 selected - * @arg ADC_Channel_5: ADC Channel5 selected - * @arg ADC_Channel_6: ADC Channel6 selected - * @arg ADC_Channel_7: ADC Channel7 selected - * @arg ADC_Channel_8: ADC Channel8 selected - * @arg ADC_Channel_9: ADC Channel9 selected - * @arg ADC_Channel_10: ADC Channel10 selected - * @arg ADC_Channel_11: ADC Channel11 selected - * @arg ADC_Channel_12: ADC Channel12 selected - * @arg ADC_Channel_13: ADC Channel13 selected - * @arg ADC_Channel_14: ADC Channel14 selected - * @arg ADC_Channel_15: ADC Channel15 selected - * @arg ADC_Channel_16: ADC Channel16 selected - * @arg ADC_Channel_17: ADC Channel17 selected - * @param Rank: The rank in the regular group sequencer. This parameter must be between 1 to 16. - * @param ADC_SampleTime: The sample time value to be set for the selected channel. - * This parameter can be one of the following values: - * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles - * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles - * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles - * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles - * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles - * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles - * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles - * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles - * @retval None - */ -void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) -{ - uint32_t tmpreg1 = 0, tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_REGULAR_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_Set << (3 * (ADC_Channel - 10)); - /* Clear the old channel sample time */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3 * (ADC_Channel - 10)); - /* Set the new channel sample time */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); - /* Clear the old channel sample time */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); - /* Set the new channel sample time */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - /* For Rank 1 to 6 */ - if (Rank < 7) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR3; - /* Calculate the mask to clear */ - tmpreg2 = SQR3_SQ_Set << (5 * (Rank - 1)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 1)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR3 = tmpreg1; - } - /* For Rank 7 to 12 */ - else if (Rank < 13) - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR2; - /* Calculate the mask to clear */ - tmpreg2 = SQR2_SQ_Set << (5 * (Rank - 7)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 7)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR2 = tmpreg1; - } - /* For Rank 13 to 16 */ - else - { - /* Get the old register value */ - tmpreg1 = ADCx->SQR1; - /* Calculate the mask to clear */ - tmpreg2 = SQR1_SQ_Set << (5 * (Rank - 13)); - /* Clear the old SQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (Rank - 13)); - /* Set the SQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SQR1 = tmpreg1; - } -} - -/** - * @brief Enables or disables the ADCx conversion through external trigger. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC external trigger start of conversion. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion on external event */ - ADCx->CR2 |= CR2_EXTTRIG_Set; - } - else - { - /* Disable the selected ADC conversion on external event */ - ADCx->CR2 &= CR2_EXTTRIG_Reset; - } -} - -/** - * @brief Returns the last ADCx conversion result data for regular channel. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The Data conversion value. - */ -uint16_t ADC_GetConversionValue(ADC_TypeDef* ADCx) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Return the selected ADC conversion value */ - return (uint16_t) ADCx->DR; -} - -/** - * @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. - * @retval The Data conversion value. - */ -uint32_t ADC_GetDualModeConversionValue(void) -{ - /* Return the dual mode conversion value */ - return (*(__IO uint32_t *) DR_ADDRESS); -} - -/** - * @brief Enables or disables the selected ADC automatic injected group - * conversion after regular one. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC auto injected conversion - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC automatic injected group conversion */ - ADCx->CR1 |= CR1_JAUTO_Set; - } - else - { - /* Disable the selected ADC automatic injected group conversion */ - ADCx->CR1 &= CR1_JAUTO_Reset; - } -} - -/** - * @brief Enables or disables the discontinuous mode for injected group - * channel for the specified ADC - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC discontinuous mode - * on injected group channel. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC injected discontinuous mode */ - ADCx->CR1 |= CR1_JDISCEN_Set; - } - else - { - /* Disable the selected ADC injected discontinuous mode */ - ADCx->CR1 &= CR1_JDISCEN_Reset; - } -} - -/** - * @brief Configures the ADCx external trigger for injected channels conversion. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_ExternalTrigInjecConv: specifies the ADC trigger to start injected conversion. - * This parameter can be one of the following values: - * @arg ADC_ExternalTrigInjecConv_T1_TRGO: Timer1 TRGO event selected (for ADC1, ADC2 and ADC3) - * @arg ADC_ExternalTrigInjecConv_T1_CC4: Timer1 capture compare4 selected (for ADC1, ADC2 and ADC3) - * @arg ADC_ExternalTrigInjecConv_T2_TRGO: Timer2 TRGO event selected (for ADC1 and ADC2) - * @arg ADC_ExternalTrigInjecConv_T2_CC1: Timer2 capture compare1 selected (for ADC1 and ADC2) - * @arg ADC_ExternalTrigInjecConv_T3_CC4: Timer3 capture compare4 selected (for ADC1 and ADC2) - * @arg ADC_ExternalTrigInjecConv_T4_TRGO: Timer4 TRGO event selected (for ADC1 and ADC2) - * @arg ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4: External interrupt line 15 or Timer8 - * capture compare4 event selected (for ADC1 and ADC2) - * @arg ADC_ExternalTrigInjecConv_T4_CC3: Timer4 capture compare3 selected (for ADC3 only) - * @arg ADC_ExternalTrigInjecConv_T8_CC2: Timer8 capture compare2 selected (for ADC3 only) - * @arg ADC_ExternalTrigInjecConv_T8_CC4: Timer8 capture compare4 selected (for ADC3 only) - * @arg ADC_ExternalTrigInjecConv_T5_TRGO: Timer5 TRGO event selected (for ADC3 only) - * @arg ADC_ExternalTrigInjecConv_T5_CC4: Timer5 capture compare4 selected (for ADC3 only) - * @arg ADC_ExternalTrigInjecConv_None: Injected conversion started by software and not - * by external trigger (for ADC1, ADC2 and ADC3) - * @retval None - */ -void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, uint32_t ADC_ExternalTrigInjecConv) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_EXT_INJEC_TRIG(ADC_ExternalTrigInjecConv)); - /* Get the old register value */ - tmpreg = ADCx->CR2; - /* Clear the old external event selection for injected group */ - tmpreg &= CR2_JEXTSEL_Reset; - /* Set the external event selection for injected group */ - tmpreg |= ADC_ExternalTrigInjecConv; - /* Store the new register value */ - ADCx->CR2 = tmpreg; -} - -/** - * @brief Enables or disables the ADCx injected channels conversion through - * external trigger - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC external trigger start of - * injected conversion. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC external event selection for injected group */ - ADCx->CR2 |= CR2_JEXTTRIG_Set; - } - else - { - /* Disable the selected ADC external event selection for injected group */ - ADCx->CR2 &= CR2_JEXTTRIG_Reset; - } -} - -/** - * @brief Enables or disables the selected ADC start of the injected - * channels conversion. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param NewState: new state of the selected ADC software start injected conversion. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected ADC conversion for injected group on external event and start the selected - ADC injected conversion */ - ADCx->CR2 |= CR2_JEXTTRIG_JSWSTART_Set; - } - else - { - /* Disable the selected ADC conversion on external event for injected group and stop the selected - ADC injected conversion */ - ADCx->CR2 &= CR2_JEXTTRIG_JSWSTART_Reset; - } -} - -/** - * @brief Gets the selected ADC Software start injected conversion Status. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @retval The new state of ADC software start injected conversion (SET or RESET). - */ -FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - /* Check the status of JSWSTART bit */ - if ((ADCx->CR2 & CR2_JSWSTART_Set) != (uint32_t)RESET) - { - /* JSWSTART bit is set */ - bitstatus = SET; - } - else - { - /* JSWSTART bit is reset */ - bitstatus = RESET; - } - /* Return the JSWSTART bit status */ - return bitstatus; -} - -/** - * @brief Configures for the selected ADC injected channel its corresponding - * rank in the sequencer and its sample time. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_Channel: the ADC channel to configure. - * This parameter can be one of the following values: - * @arg ADC_Channel_0: ADC Channel0 selected - * @arg ADC_Channel_1: ADC Channel1 selected - * @arg ADC_Channel_2: ADC Channel2 selected - * @arg ADC_Channel_3: ADC Channel3 selected - * @arg ADC_Channel_4: ADC Channel4 selected - * @arg ADC_Channel_5: ADC Channel5 selected - * @arg ADC_Channel_6: ADC Channel6 selected - * @arg ADC_Channel_7: ADC Channel7 selected - * @arg ADC_Channel_8: ADC Channel8 selected - * @arg ADC_Channel_9: ADC Channel9 selected - * @arg ADC_Channel_10: ADC Channel10 selected - * @arg ADC_Channel_11: ADC Channel11 selected - * @arg ADC_Channel_12: ADC Channel12 selected - * @arg ADC_Channel_13: ADC Channel13 selected - * @arg ADC_Channel_14: ADC Channel14 selected - * @arg ADC_Channel_15: ADC Channel15 selected - * @arg ADC_Channel_16: ADC Channel16 selected - * @arg ADC_Channel_17: ADC Channel17 selected - * @param Rank: The rank in the injected group sequencer. This parameter must be between 1 and 4. - * @param ADC_SampleTime: The sample time value to be set for the selected channel. - * This parameter can be one of the following values: - * @arg ADC_SampleTime_1Cycles5: Sample time equal to 1.5 cycles - * @arg ADC_SampleTime_7Cycles5: Sample time equal to 7.5 cycles - * @arg ADC_SampleTime_13Cycles5: Sample time equal to 13.5 cycles - * @arg ADC_SampleTime_28Cycles5: Sample time equal to 28.5 cycles - * @arg ADC_SampleTime_41Cycles5: Sample time equal to 41.5 cycles - * @arg ADC_SampleTime_55Cycles5: Sample time equal to 55.5 cycles - * @arg ADC_SampleTime_71Cycles5: Sample time equal to 71.5 cycles - * @arg ADC_SampleTime_239Cycles5: Sample time equal to 239.5 cycles - * @retval None - */ -void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel, uint8_t Rank, uint8_t ADC_SampleTime) -{ - uint32_t tmpreg1 = 0, tmpreg2 = 0, tmpreg3 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - assert_param(IS_ADC_INJECTED_RANK(Rank)); - assert_param(IS_ADC_SAMPLE_TIME(ADC_SampleTime)); - /* if ADC_Channel_10 ... ADC_Channel_17 is selected */ - if (ADC_Channel > ADC_Channel_9) - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR1; - /* Calculate the mask to clear */ - tmpreg2 = SMPR1_SMP_Set << (3*(ADC_Channel - 10)); - /* Clear the old channel sample time */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3*(ADC_Channel - 10)); - /* Set the new channel sample time */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR1 = tmpreg1; - } - else /* ADC_Channel include in ADC_Channel_[0..9] */ - { - /* Get the old register value */ - tmpreg1 = ADCx->SMPR2; - /* Calculate the mask to clear */ - tmpreg2 = SMPR2_SMP_Set << (3 * ADC_Channel); - /* Clear the old channel sample time */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set */ - tmpreg2 = (uint32_t)ADC_SampleTime << (3 * ADC_Channel); - /* Set the new channel sample time */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->SMPR2 = tmpreg1; - } - /* Rank configuration */ - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Get JL value: Number = JL+1 */ - tmpreg3 = (tmpreg1 & JSQR_JL_Set)>> 20; - /* Calculate the mask to clear: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = JSQR_JSQ_Set << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); - /* Clear the old JSQx bits for the selected rank */ - tmpreg1 &= ~tmpreg2; - /* Calculate the mask to set: ((Rank-1)+(4-JL-1)) */ - tmpreg2 = (uint32_t)ADC_Channel << (5 * (uint8_t)((Rank + 3) - (tmpreg3 + 1))); - /* Set the JSQx bits for the selected rank */ - tmpreg1 |= tmpreg2; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/** - * @brief Configures the sequencer length for injected channels - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param Length: The sequencer length. - * This parameter must be a number between 1 to 4. - * @retval None - */ -void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, uint8_t Length) -{ - uint32_t tmpreg1 = 0; - uint32_t tmpreg2 = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_LENGTH(Length)); - - /* Get the old register value */ - tmpreg1 = ADCx->JSQR; - /* Clear the old injected sequnence lenght JL bits */ - tmpreg1 &= JSQR_JL_Reset; - /* Set the injected sequnence lenght JL bits */ - tmpreg2 = Length - 1; - tmpreg1 |= tmpreg2 << 20; - /* Store the new register value */ - ADCx->JSQR = tmpreg1; -} - -/** - * @brief Set the injected channels conversion value offset - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_InjectedChannel: the ADC injected channel to set its offset. - * This parameter can be one of the following values: - * @arg ADC_InjectedChannel_1: Injected Channel1 selected - * @arg ADC_InjectedChannel_2: Injected Channel2 selected - * @arg ADC_InjectedChannel_3: Injected Channel3 selected - * @arg ADC_InjectedChannel_4: Injected Channel4 selected - * @param Offset: the offset value for the selected ADC injected channel - * This parameter must be a 12bit value. - * @retval None - */ -void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel, uint16_t Offset) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - assert_param(IS_ADC_OFFSET(Offset)); - - tmp = (uint32_t)ADCx; - tmp += ADC_InjectedChannel; - - /* Set the selected injected channel data offset */ - *(__IO uint32_t *) tmp = (uint32_t)Offset; -} - -/** - * @brief Returns the ADC injected channel conversion result - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_InjectedChannel: the converted ADC injected channel. - * This parameter can be one of the following values: - * @arg ADC_InjectedChannel_1: Injected Channel1 selected - * @arg ADC_InjectedChannel_2: Injected Channel2 selected - * @arg ADC_InjectedChannel_3: Injected Channel3 selected - * @arg ADC_InjectedChannel_4: Injected Channel4 selected - * @retval The Data conversion value. - */ -uint16_t ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, uint8_t ADC_InjectedChannel) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_INJECTED_CHANNEL(ADC_InjectedChannel)); - - tmp = (uint32_t)ADCx; - tmp += ADC_InjectedChannel + JDR_Offset; - - /* Returns the selected injected channel conversion data value */ - return (uint16_t) (*(__IO uint32_t*) tmp); -} - -/** - * @brief Enables or disables the analog watchdog on single/all regular - * or injected channels - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_AnalogWatchdog: the ADC analog watchdog configuration. - * This parameter can be one of the following values: - * @arg ADC_AnalogWatchdog_SingleRegEnable: Analog watchdog on a single regular channel - * @arg ADC_AnalogWatchdog_SingleInjecEnable: Analog watchdog on a single injected channel - * @arg ADC_AnalogWatchdog_SingleRegOrInjecEnable: Analog watchdog on a single regular or injected channel - * @arg ADC_AnalogWatchdog_AllRegEnable: Analog watchdog on all regular channel - * @arg ADC_AnalogWatchdog_AllInjecEnable: Analog watchdog on all injected channel - * @arg ADC_AnalogWatchdog_AllRegAllInjecEnable: Analog watchdog on all regular and injected channels - * @arg ADC_AnalogWatchdog_None: No channel guarded by the analog watchdog - * @retval None - */ -void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, uint32_t ADC_AnalogWatchdog) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_ANALOG_WATCHDOG(ADC_AnalogWatchdog)); - /* Get the old register value */ - tmpreg = ADCx->CR1; - /* Clear AWDEN, AWDENJ and AWDSGL bits */ - tmpreg &= CR1_AWDMode_Reset; - /* Set the analog watchdog enable mode */ - tmpreg |= ADC_AnalogWatchdog; - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/** - * @brief Configures the high and low thresholds of the analog watchdog. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param HighThreshold: the ADC analog watchdog High threshold value. - * This parameter must be a 12bit value. - * @param LowThreshold: the ADC analog watchdog Low threshold value. - * This parameter must be a 12bit value. - * @retval None - */ -void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, uint16_t HighThreshold, - uint16_t LowThreshold) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_THRESHOLD(HighThreshold)); - assert_param(IS_ADC_THRESHOLD(LowThreshold)); - /* Set the ADCx high threshold */ - ADCx->HTR = HighThreshold; - /* Set the ADCx low threshold */ - ADCx->LTR = LowThreshold; -} - -/** - * @brief Configures the analog watchdog guarded single channel - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_Channel: the ADC channel to configure for the analog watchdog. - * This parameter can be one of the following values: - * @arg ADC_Channel_0: ADC Channel0 selected - * @arg ADC_Channel_1: ADC Channel1 selected - * @arg ADC_Channel_2: ADC Channel2 selected - * @arg ADC_Channel_3: ADC Channel3 selected - * @arg ADC_Channel_4: ADC Channel4 selected - * @arg ADC_Channel_5: ADC Channel5 selected - * @arg ADC_Channel_6: ADC Channel6 selected - * @arg ADC_Channel_7: ADC Channel7 selected - * @arg ADC_Channel_8: ADC Channel8 selected - * @arg ADC_Channel_9: ADC Channel9 selected - * @arg ADC_Channel_10: ADC Channel10 selected - * @arg ADC_Channel_11: ADC Channel11 selected - * @arg ADC_Channel_12: ADC Channel12 selected - * @arg ADC_Channel_13: ADC Channel13 selected - * @arg ADC_Channel_14: ADC Channel14 selected - * @arg ADC_Channel_15: ADC Channel15 selected - * @arg ADC_Channel_16: ADC Channel16 selected - * @arg ADC_Channel_17: ADC Channel17 selected - * @retval None - */ -void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, uint8_t ADC_Channel) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CHANNEL(ADC_Channel)); - /* Get the old register value */ - tmpreg = ADCx->CR1; - /* Clear the Analog watchdog channel select bits */ - tmpreg &= CR1_AWDCH_Reset; - /* Set the Analog watchdog channel */ - tmpreg |= ADC_Channel; - /* Store the new register value */ - ADCx->CR1 = tmpreg; -} - -/** - * @brief Enables or disables the temperature sensor and Vrefint channel. - * @param NewState: new state of the temperature sensor. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void ADC_TempSensorVrefintCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the temperature sensor and Vrefint channel*/ - ADC1->CR2 |= CR2_TSVREFE_Set; - } - else - { - /* Disable the temperature sensor and Vrefint channel*/ - ADC1->CR2 &= CR2_TSVREFE_Reset; - } -} - -/** - * @brief Checks whether the specified ADC flag is set or not. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg ADC_FLAG_AWD: Analog watchdog flag - * @arg ADC_FLAG_EOC: End of conversion flag - * @arg ADC_FLAG_JEOC: End of injected group conversion flag - * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag - * @arg ADC_FLAG_STRT: Start of regular group conversion flag - * @retval The new state of ADC_FLAG (SET or RESET). - */ -FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_FLAG(ADC_FLAG)); - /* Check the status of the specified ADC flag */ - if ((ADCx->SR & ADC_FLAG) != (uint8_t)RESET) - { - /* ADC_FLAG is set */ - bitstatus = SET; - } - else - { - /* ADC_FLAG is reset */ - bitstatus = RESET; - } - /* Return the ADC_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the ADCx's pending flags. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg ADC_FLAG_AWD: Analog watchdog flag - * @arg ADC_FLAG_EOC: End of conversion flag - * @arg ADC_FLAG_JEOC: End of injected group conversion flag - * @arg ADC_FLAG_JSTRT: Start of injected group conversion flag - * @arg ADC_FLAG_STRT: Start of regular group conversion flag - * @retval None - */ -void ADC_ClearFlag(ADC_TypeDef* ADCx, uint8_t ADC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_CLEAR_FLAG(ADC_FLAG)); - /* Clear the selected ADC flags */ - ADCx->SR = ~(uint32_t)ADC_FLAG; -} - -/** - * @brief Checks whether the specified ADC interrupt has occurred or not. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_IT: specifies the ADC interrupt source to check. - * This parameter can be one of the following values: - * @arg ADC_IT_EOC: End of conversion interrupt mask - * @arg ADC_IT_AWD: Analog watchdog interrupt mask - * @arg ADC_IT_JEOC: End of injected conversion interrupt mask - * @retval The new state of ADC_IT (SET or RESET). - */ -ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, uint16_t ADC_IT) -{ - ITStatus bitstatus = RESET; - uint32_t itmask = 0, enablestatus = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_GET_IT(ADC_IT)); - /* Get the ADC IT index */ - itmask = ADC_IT >> 8; - /* Get the ADC_IT enable bit status */ - enablestatus = (ADCx->CR1 & (uint8_t)ADC_IT) ; - /* Check the status of the specified ADC interrupt */ - if (((ADCx->SR & itmask) != (uint32_t)RESET) && enablestatus) - { - /* ADC_IT is set */ - bitstatus = SET; - } - else - { - /* ADC_IT is reset */ - bitstatus = RESET; - } - /* Return the ADC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the ADCx’s interrupt pending bits. - * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. - * @param ADC_IT: specifies the ADC interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg ADC_IT_EOC: End of conversion interrupt mask - * @arg ADC_IT_AWD: Analog watchdog interrupt mask - * @arg ADC_IT_JEOC: End of injected conversion interrupt mask - * @retval None - */ -void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, uint16_t ADC_IT) -{ - uint8_t itmask = 0; - /* Check the parameters */ - assert_param(IS_ADC_ALL_PERIPH(ADCx)); - assert_param(IS_ADC_IT(ADC_IT)); - /* Get the ADC IT index */ - itmask = (uint8_t)(ADC_IT >> 8); - /* Clear the selected ADC interrupt pending bits */ - ADCx->SR = ~(uint32_t)itmask; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c deleted file mode 100644 index e4653a795..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_bkp.c +++ /dev/null @@ -1,311 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_bkp.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the BKP firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_bkp.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup BKP - * @brief BKP driver modules - * @{ - */ - -/** @defgroup BKP_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Defines - * @{ - */ - -/* ------------ BKP registers bit address in the alias region --------------- */ -#define BKP_OFFSET (BKP_BASE - PERIPH_BASE) - -/* --- CR Register ----*/ - -/* Alias word address of TPAL bit */ -#define CR_OFFSET (BKP_OFFSET + 0x30) -#define TPAL_BitNumber 0x01 -#define CR_TPAL_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPAL_BitNumber * 4)) - -/* Alias word address of TPE bit */ -#define TPE_BitNumber 0x00 -#define CR_TPE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (TPE_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of TPIE bit */ -#define CSR_OFFSET (BKP_OFFSET + 0x34) -#define TPIE_BitNumber 0x02 -#define CSR_TPIE_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TPIE_BitNumber * 4)) - -/* Alias word address of TIF bit */ -#define TIF_BitNumber 0x09 -#define CSR_TIF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TIF_BitNumber * 4)) - -/* Alias word address of TEF bit */ -#define TEF_BitNumber 0x08 -#define CSR_TEF_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (TEF_BitNumber * 4)) - -/* ---------------------- BKP registers bit mask ------------------------ */ - -/* RTCCR register bit mask */ -#define RTCCR_CAL_Mask ((uint16_t)0xFF80) -#define RTCCR_Mask ((uint16_t)0xFC7F) - -/* CSR register bit mask */ -#define CSR_CTE_Set ((uint16_t)0x0001) -#define CSR_CTI_Set ((uint16_t)0x0002) - -/** - * @} - */ - - -/** @defgroup BKP_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup BKP_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the BKP peripheral registers to their default reset values. - * @param None - * @retval None - */ -void BKP_DeInit(void) -{ - RCC_BackupResetCmd(ENABLE); - RCC_BackupResetCmd(DISABLE); -} - -/** - * @brief Configures the Tamper Pin active level. - * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. - * This parameter can be one of the following values: - * @arg BKP_TamperPinLevel_High: Tamper pin active on high level - * @arg BKP_TamperPinLevel_Low: Tamper pin active on low level - * @retval None - */ -void BKP_TamperPinLevelConfig(uint16_t BKP_TamperPinLevel) -{ - /* Check the parameters */ - assert_param(IS_BKP_TAMPER_PIN_LEVEL(BKP_TamperPinLevel)); - *(__IO uint32_t *) CR_TPAL_BB = BKP_TamperPinLevel; -} - -/** - * @brief Enables or disables the Tamper Pin activation. - * @param NewState: new state of the Tamper Pin activation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void BKP_TamperPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_TPE_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Tamper Pin Interrupt. - * @param NewState: new state of the Tamper Pin Interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void BKP_ITConfig(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_TPIE_BB = (uint32_t)NewState; -} - -/** - * @brief Select the RTC output source to output on the Tamper pin. - * @param BKP_RTCOutputSource: specifies the RTC output source. - * This parameter can be one of the following values: - * @arg BKP_RTCOutputSource_None: no RTC output on the Tamper pin. - * @arg BKP_RTCOutputSource_CalibClock: output the RTC clock with frequency - * divided by 64 on the Tamper pin. - * @arg BKP_RTCOutputSource_Alarm: output the RTC Alarm pulse signal on - * the Tamper pin. - * @arg BKP_RTCOutputSource_Second: output the RTC Second pulse signal on - * the Tamper pin. - * @retval None - */ -void BKP_RTCOutputConfig(uint16_t BKP_RTCOutputSource) -{ - uint16_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_BKP_RTC_OUTPUT_SOURCE(BKP_RTCOutputSource)); - tmpreg = BKP->RTCCR; - /* Clear CCO, ASOE and ASOS bits */ - tmpreg &= RTCCR_Mask; - - /* Set CCO, ASOE and ASOS bits according to BKP_RTCOutputSource value */ - tmpreg |= BKP_RTCOutputSource; - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/** - * @brief Sets RTC Clock Calibration value. - * @param CalibrationValue: specifies the RTC Clock Calibration value. - * This parameter must be a number between 0 and 0x7F. - * @retval None - */ -void BKP_SetRTCCalibrationValue(uint8_t CalibrationValue) -{ - uint16_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_BKP_CALIBRATION_VALUE(CalibrationValue)); - tmpreg = BKP->RTCCR; - /* Clear CAL[6:0] bits */ - tmpreg &= RTCCR_CAL_Mask; - /* Set CAL[6:0] bits according to CalibrationValue value */ - tmpreg |= CalibrationValue; - /* Store the new value */ - BKP->RTCCR = tmpreg; -} - -/** - * @brief Writes user data to the specified Data Backup Register. - * @param BKP_DR: specifies the Data Backup Register. - * This parameter can be BKP_DRx where x:[1, 42] - * @param Data: data to write - * @retval None - */ -void BKP_WriteBackupRegister(uint16_t BKP_DR, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - tmp = (uint32_t)BKP_BASE; - tmp += BKP_DR; - - *(__IO uint32_t *) tmp = Data; -} - -/** - * @brief Reads data from the specified Data Backup Register. - * @param BKP_DR: specifies the Data Backup Register. - * This parameter can be BKP_DRx where x:[1, 42] - * @retval The content of the specified Data Backup Register - */ -uint16_t BKP_ReadBackupRegister(uint16_t BKP_DR) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_BKP_DR(BKP_DR)); - - tmp = (uint32_t)BKP_BASE; - tmp += BKP_DR; - - return (*(__IO uint16_t *) tmp); -} - -/** - * @brief Checks whether the Tamper Pin Event flag is set or not. - * @param None - * @retval The new state of the Tamper Pin Event flag (SET or RESET). - */ -FlagStatus BKP_GetFlagStatus(void) -{ - return (FlagStatus)(*(__IO uint32_t *) CSR_TEF_BB); -} - -/** - * @brief Clears Tamper Pin Event pending flag. - * @param None - * @retval None - */ -void BKP_ClearFlag(void) -{ - /* Set CTE bit to clear Tamper Pin Event flag */ - BKP->CSR |= CSR_CTE_Set; -} - -/** - * @brief Checks whether the Tamper Pin Interrupt has occurred or not. - * @param None - * @retval The new state of the Tamper Pin Interrupt (SET or RESET). - */ -ITStatus BKP_GetITStatus(void) -{ - return (ITStatus)(*(__IO uint32_t *) CSR_TIF_BB); -} - -/** - * @brief Clears Tamper Pin Interrupt pending bit. - * @param None - * @retval None - */ -void BKP_ClearITPendingBit(void) -{ - /* Set CTI bit to clear Tamper Pin Interrupt pending bit */ - BKP->CSR |= CSR_CTI_Set; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c deleted file mode 100644 index d459a1066..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_can.c +++ /dev/null @@ -1,990 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_can.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the CAN firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_can.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup CAN - * @brief CAN driver modules - * @{ - */ - -/** @defgroup CAN_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Private_Defines - * @{ - */ - -/* CAN Master Control Register bits */ -#define MCR_INRQ ((uint32_t)0x00000001) /* Initialization request */ -#define MCR_SLEEP ((uint32_t)0x00000002) /* Sleep mode request */ -#define MCR_TXFP ((uint32_t)0x00000004) /* Transmit FIFO priority */ -#define MCR_RFLM ((uint32_t)0x00000008) /* Receive FIFO locked mode */ -#define MCR_NART ((uint32_t)0x00000010) /* No automatic retransmission */ -#define MCR_AWUM ((uint32_t)0x00000020) /* Automatic wake up mode */ -#define MCR_ABOM ((uint32_t)0x00000040) /* Automatic bus-off management */ -#define MCR_TTCM ((uint32_t)0x00000080) /* time triggered communication */ -#define MCR_RESET ((uint32_t)0x00008000) /* time triggered communication */ -#define MCR_DBF ((uint32_t)0x00010000) /* software master reset */ - -/* CAN Master Status Register bits */ -#define MSR_INAK ((uint32_t)0x00000001) /* Initialization acknowledge */ -#define MSR_WKUI ((uint32_t)0x00000008) /* Wake-up interrupt */ -#define MSR_SLAKI ((uint32_t)0x00000010) /* Sleep acknowledge interrupt */ - -/* CAN Transmit Status Register bits */ -#define TSR_RQCP0 ((uint32_t)0x00000001) /* Request completed mailbox0 */ -#define TSR_TXOK0 ((uint32_t)0x00000002) /* Transmission OK of mailbox0 */ -#define TSR_ABRQ0 ((uint32_t)0x00000080) /* Abort request for mailbox0 */ -#define TSR_RQCP1 ((uint32_t)0x00000100) /* Request completed mailbox1 */ -#define TSR_TXOK1 ((uint32_t)0x00000200) /* Transmission OK of mailbox1 */ -#define TSR_ABRQ1 ((uint32_t)0x00008000) /* Abort request for mailbox1 */ -#define TSR_RQCP2 ((uint32_t)0x00010000) /* Request completed mailbox2 */ -#define TSR_TXOK2 ((uint32_t)0x00020000) /* Transmission OK of mailbox2 */ -#define TSR_ABRQ2 ((uint32_t)0x00800000) /* Abort request for mailbox2 */ -#define TSR_TME0 ((uint32_t)0x04000000) /* Transmit mailbox 0 empty */ -#define TSR_TME1 ((uint32_t)0x08000000) /* Transmit mailbox 1 empty */ -#define TSR_TME2 ((uint32_t)0x10000000) /* Transmit mailbox 2 empty */ - -/* CAN Receive FIFO 0 Register bits */ -#define RF0R_FULL0 ((uint32_t)0x00000008) /* FIFO 0 full */ -#define RF0R_FOVR0 ((uint32_t)0x00000010) /* FIFO 0 overrun */ -#define RF0R_RFOM0 ((uint32_t)0x00000020) /* Release FIFO 0 output mailbox */ - -/* CAN Receive FIFO 1 Register bits */ -#define RF1R_FULL1 ((uint32_t)0x00000008) /* FIFO 1 full */ -#define RF1R_FOVR1 ((uint32_t)0x00000010) /* FIFO 1 overrun */ -#define RF1R_RFOM1 ((uint32_t)0x00000020) /* Release FIFO 1 output mailbox */ - -/* CAN Error Status Register bits */ -#define ESR_EWGF ((uint32_t)0x00000001) /* Error warning flag */ -#define ESR_EPVF ((uint32_t)0x00000002) /* Error passive flag */ -#define ESR_BOFF ((uint32_t)0x00000004) /* Bus-off flag */ - -/* CAN Mailbox Transmit Request */ -#define TMIDxR_TXRQ ((uint32_t)0x00000001) /* Transmit mailbox request */ - -/* CAN Filter Master Register bits */ -#define FMR_FINIT ((uint32_t)0x00000001) /* Filter init mode */ - -/* Time out for INAK bit */ -#define INAK_TimeOut ((uint32_t)0x0000FFFF) - -/* Time out for SLAK bit */ -#define SLAK_TimeOut ((uint32_t)0x0000FFFF) - -/** - * @} - */ - -/** @defgroup CAN_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup CAN_Private_FunctionPrototypes - * @{ - */ - -static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit); - -/** - * @} - */ - -/** @defgroup CAN_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the CAN peripheral registers to their default reset values. - * @param CANx: where x can be 1 or 2 to select the CAN peripheral. - * @retval None. - */ -void CAN_DeInit(CAN_TypeDef* CANx) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - if (CANx == CAN1) - { - /* Enable CAN1 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, ENABLE); - /* Release CAN1 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN1, DISABLE); - } - else - { - /* Enable CAN2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, ENABLE); - /* Release CAN2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_CAN2, DISABLE); - } -} - -/** - * @brief Initializes the CAN peripheral according to the specified - * parameters in the CAN_InitStruct. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure that - * contains the configuration information for the CAN peripheral. - * @retval Constant indicates initialization succeed which will be - * CANINITFAILED or CANINITOK. - */ -uint8_t CAN_Init(CAN_TypeDef* CANx, CAN_InitTypeDef* CAN_InitStruct) -{ - uint8_t InitStatus = CANINITFAILED; - uint32_t wait_ack = 0x00000000; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TTCM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_ABOM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_AWUM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_NART)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_RFLM)); - assert_param(IS_FUNCTIONAL_STATE(CAN_InitStruct->CAN_TXFP)); - assert_param(IS_CAN_MODE(CAN_InitStruct->CAN_Mode)); - assert_param(IS_CAN_SJW(CAN_InitStruct->CAN_SJW)); - assert_param(IS_CAN_BS1(CAN_InitStruct->CAN_BS1)); - assert_param(IS_CAN_BS2(CAN_InitStruct->CAN_BS2)); - assert_param(IS_CAN_PRESCALER(CAN_InitStruct->CAN_Prescaler)); - - /* exit from sleep mode */ - CANx->MCR &= ~MCR_SLEEP; - - /* Request initialisation */ - CANx->MCR |= MCR_INRQ ; - - /* Wait the acknowledge */ - while (((CANx->MSR & MSR_INAK) != MSR_INAK) && (wait_ack != INAK_TimeOut)) - { - wait_ack++; - } - - /* ...and check acknowledged */ - if ((CANx->MSR & MSR_INAK) != MSR_INAK) - { - InitStatus = CANINITFAILED; - } - else - { - /* Set the time triggered communication mode */ - if (CAN_InitStruct->CAN_TTCM == ENABLE) - { - CANx->MCR |= MCR_TTCM; - } - else - { - CANx->MCR &= ~MCR_TTCM; - } - - /* Set the automatic bus-off management */ - if (CAN_InitStruct->CAN_ABOM == ENABLE) - { - CANx->MCR |= MCR_ABOM; - } - else - { - CANx->MCR &= ~MCR_ABOM; - } - - /* Set the automatic wake-up mode */ - if (CAN_InitStruct->CAN_AWUM == ENABLE) - { - CANx->MCR |= MCR_AWUM; - } - else - { - CANx->MCR &= ~MCR_AWUM; - } - - /* Set the no automatic retransmission */ - if (CAN_InitStruct->CAN_NART == ENABLE) - { - CANx->MCR |= MCR_NART; - } - else - { - CANx->MCR &= ~MCR_NART; - } - - /* Set the receive FIFO locked mode */ - if (CAN_InitStruct->CAN_RFLM == ENABLE) - { - CANx->MCR |= MCR_RFLM; - } - else - { - CANx->MCR &= ~MCR_RFLM; - } - - /* Set the transmit FIFO priority */ - if (CAN_InitStruct->CAN_TXFP == ENABLE) - { - CANx->MCR |= MCR_TXFP; - } - else - { - CANx->MCR &= ~MCR_TXFP; - } - - /* Set the bit timing register */ - CANx->BTR = (uint32_t)((uint32_t)CAN_InitStruct->CAN_Mode << 30) | ((uint32_t)CAN_InitStruct->CAN_SJW << 24) | - ((uint32_t)CAN_InitStruct->CAN_BS1 << 16) | ((uint32_t)CAN_InitStruct->CAN_BS2 << 20) | - ((uint32_t)CAN_InitStruct->CAN_Prescaler - 1); - - /* Request leave initialisation */ - CANx->MCR &= ~MCR_INRQ; - - /* Wait the acknowledge */ - wait_ack = 0x00; - - while (((CANx->MSR & MSR_INAK) == MSR_INAK) && (wait_ack != INAK_TimeOut)) - { - wait_ack++; - } - - /* ...and check acknowledged */ - if ((CANx->MSR & MSR_INAK) == MSR_INAK) - { - InitStatus = CANINITFAILED; - } - else - { - InitStatus = CANINITOK ; - } - } - - /* At this step, return the status of initialization */ - return InitStatus; -} - -/** - * @brief Initializes the CAN peripheral according to the specified - * parameters in the CAN_FilterInitStruct. - * @param CAN_FilterInitStruct: pointer to a CAN_FilterInitTypeDef - * structure that contains the configuration information. - * @retval None. - */ -void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct) -{ - uint32_t filter_number_bit_pos = 0; - /* Check the parameters */ - assert_param(IS_CAN_FILTER_NUMBER(CAN_FilterInitStruct->CAN_FilterNumber)); - assert_param(IS_CAN_FILTER_MODE(CAN_FilterInitStruct->CAN_FilterMode)); - assert_param(IS_CAN_FILTER_SCALE(CAN_FilterInitStruct->CAN_FilterScale)); - assert_param(IS_CAN_FILTER_FIFO(CAN_FilterInitStruct->CAN_FilterFIFOAssignment)); - assert_param(IS_FUNCTIONAL_STATE(CAN_FilterInitStruct->CAN_FilterActivation)); - - filter_number_bit_pos = ((uint32_t)0x00000001) << CAN_FilterInitStruct->CAN_FilterNumber; - - /* Initialisation mode for the filter */ - CAN1->FMR |= FMR_FINIT; - - /* Filter Deactivation */ - CAN1->FA1R &= ~(uint32_t)filter_number_bit_pos; - - /* Filter Scale */ - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_16bit) - { - /* 16-bit scale for the filter */ - CAN1->FS1R &= ~(uint32_t)filter_number_bit_pos; - - /* First 16-bit identifier and First 16-bit mask */ - /* Or First 16-bit identifier and Second 16-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); - - /* Second 16-bit identifier and Second 16-bit mask */ - /* Or Third 16-bit identifier and Fourth 16-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh); - } - - if (CAN_FilterInitStruct->CAN_FilterScale == CAN_FilterScale_32bit) - { - /* 32-bit scale for the filter */ - CAN1->FS1R |= filter_number_bit_pos; - /* 32-bit identifier or First 32-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR1 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdHigh) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterIdLow); - /* 32-bit mask or Second 32-bit identifier */ - CAN1->sFilterRegister[CAN_FilterInitStruct->CAN_FilterNumber].FR2 = - ((0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdHigh) << 16) | - (0x0000FFFF & (uint32_t)CAN_FilterInitStruct->CAN_FilterMaskIdLow); - } - - /* Filter Mode */ - if (CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdMask) - { - /*Id/Mask mode for the filter*/ - CAN1->FM1R &= ~(uint32_t)filter_number_bit_pos; - } - else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */ - { - /*Identifier list mode for the filter*/ - CAN1->FM1R |= (uint32_t)filter_number_bit_pos; - } - - /* Filter FIFO assignment */ - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_FilterFIFO0) - { - /* FIFO 0 assignation for the filter */ - CAN1->FFA1R &= ~(uint32_t)filter_number_bit_pos; - } - - if (CAN_FilterInitStruct->CAN_FilterFIFOAssignment == CAN_FilterFIFO1) - { - /* FIFO 1 assignation for the filter */ - CAN1->FFA1R |= (uint32_t)filter_number_bit_pos; - } - - /* Filter activation */ - if (CAN_FilterInitStruct->CAN_FilterActivation == ENABLE) - { - CAN1->FA1R |= filter_number_bit_pos; - } - - /* Leave the initialisation mode for the filter */ - CAN1->FMR &= ~FMR_FINIT; -} - -/** - * @brief Fills each CAN_InitStruct member with its default value. - * @param CAN_InitStruct: pointer to a CAN_InitTypeDef structure which - * will be initialized. - * @retval None. - */ -void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct) -{ - /* Reset CAN init structure parameters values */ - /* Initialize the time triggered communication mode */ - CAN_InitStruct->CAN_TTCM = DISABLE; - /* Initialize the automatic bus-off management */ - CAN_InitStruct->CAN_ABOM = DISABLE; - /* Initialize the automatic wake-up mode */ - CAN_InitStruct->CAN_AWUM = DISABLE; - /* Initialize the no automatic retransmission */ - CAN_InitStruct->CAN_NART = DISABLE; - /* Initialize the receive FIFO locked mode */ - CAN_InitStruct->CAN_RFLM = DISABLE; - /* Initialize the transmit FIFO priority */ - CAN_InitStruct->CAN_TXFP = DISABLE; - /* Initialize the CAN_Mode member */ - CAN_InitStruct->CAN_Mode = CAN_Mode_Normal; - /* Initialize the CAN_SJW member */ - CAN_InitStruct->CAN_SJW = CAN_SJW_1tq; - /* Initialize the CAN_BS1 member */ - CAN_InitStruct->CAN_BS1 = CAN_BS1_4tq; - /* Initialize the CAN_BS2 member */ - CAN_InitStruct->CAN_BS2 = CAN_BS2_3tq; - /* Initialize the CAN_Prescaler member */ - CAN_InitStruct->CAN_Prescaler = 1; -} - -/** - * @brief Select the start bank filter for slave CAN. - * @note This function applies only to STM32 Connectivity line devices. - * @param CAN_BankNumber: Select the start slave bank filter from 1..27. - * @retval None. - */ -void CAN_SlaveStartBank(uint8_t CAN_BankNumber) -{ - /* Check the parameters */ - assert_param(IS_CAN_BANKNUMBER(CAN_BankNumber)); - /* enter Initialisation mode for the filter */ - CAN1->FMR |= FMR_FINIT; - /* Select the start slave bank */ - CAN1->FMR &= (uint32_t)0xFFFFC0F1 ; - CAN1->FMR |= (uint32_t)(CAN_BankNumber)<<8; - /* Leave Initialisation mode for the filter */ - CAN1->FMR &= ~FMR_FINIT; -} - -/** - * @brief Enables or disables the specified CAN interrupts. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_IT: specifies the CAN interrupt sources to be enabled or disabled. - * This parameter can be: CAN_IT_TME, CAN_IT_FMP0, CAN_IT_FF0, - * CAN_IT_FOV0, CAN_IT_FMP1, CAN_IT_FF1, - * CAN_IT_FOV1, CAN_IT_EWG, CAN_IT_EPV, - * CAN_IT_LEC, CAN_IT_ERR, CAN_IT_WKU or - * CAN_IT_SLK. - * @param NewState: new state of the CAN interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void CAN_ITConfig(CAN_TypeDef* CANx, uint32_t CAN_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_ITConfig(CAN_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected CAN interrupt */ - CANx->IER |= CAN_IT; - } - else - { - /* Disable the selected CAN interrupt */ - CANx->IER &= ~CAN_IT; - } -} - -/** - * @brief Initiates the transmission of a message. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param TxMessage: pointer to a structure which contains CAN Id, CAN - * DLC and CAN datas. - * @retval The number of the mailbox that is used for transmission - * or CAN_NO_MB if there is no empty mailbox. - */ -uint8_t CAN_Transmit(CAN_TypeDef* CANx, CanTxMsg* TxMessage) -{ - uint8_t transmit_mailbox = 0; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_IDTYPE(TxMessage->IDE)); - assert_param(IS_CAN_RTR(TxMessage->RTR)); - assert_param(IS_CAN_DLC(TxMessage->DLC)); - - /* Select one empty transmit mailbox */ - if ((CANx->TSR&TSR_TME0) == TSR_TME0) - { - transmit_mailbox = 0; - } - else if ((CANx->TSR&TSR_TME1) == TSR_TME1) - { - transmit_mailbox = 1; - } - else if ((CANx->TSR&TSR_TME2) == TSR_TME2) - { - transmit_mailbox = 2; - } - else - { - transmit_mailbox = CAN_NO_MB; - } - - if (transmit_mailbox != CAN_NO_MB) - { - /* Set up the Id */ - CANx->sTxMailBox[transmit_mailbox].TIR &= TMIDxR_TXRQ; - if (TxMessage->IDE == CAN_ID_STD) - { - assert_param(IS_CAN_STDID(TxMessage->StdId)); - CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->StdId << 21) | TxMessage->RTR); - } - else - { - assert_param(IS_CAN_EXTID(TxMessage->ExtId)); - CANx->sTxMailBox[transmit_mailbox].TIR |= ((TxMessage->ExtId<<3) | TxMessage->IDE | - TxMessage->RTR); - } - - - /* Set up the DLC */ - TxMessage->DLC &= (uint8_t)0x0000000F; - CANx->sTxMailBox[transmit_mailbox].TDTR &= (uint32_t)0xFFFFFFF0; - CANx->sTxMailBox[transmit_mailbox].TDTR |= TxMessage->DLC; - - /* Set up the data field */ - CANx->sTxMailBox[transmit_mailbox].TDLR = (((uint32_t)TxMessage->Data[3] << 24) | - ((uint32_t)TxMessage->Data[2] << 16) | - ((uint32_t)TxMessage->Data[1] << 8) | - ((uint32_t)TxMessage->Data[0])); - CANx->sTxMailBox[transmit_mailbox].TDHR = (((uint32_t)TxMessage->Data[7] << 24) | - ((uint32_t)TxMessage->Data[6] << 16) | - ((uint32_t)TxMessage->Data[5] << 8) | - ((uint32_t)TxMessage->Data[4])); - /* Request transmission */ - CANx->sTxMailBox[transmit_mailbox].TIR |= TMIDxR_TXRQ; - } - return transmit_mailbox; -} - -/** - * @brief Checks the transmission of a message. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param TransmitMailbox: the number of the mailbox that is used for transmission. - * @retval CANTXOK if the CAN driver transmits the message, CANTXFAILED in an other case. - */ -uint8_t CAN_TransmitStatus(CAN_TypeDef* CANx, uint8_t TransmitMailbox) -{ - /* RQCP, TXOK and TME bits */ - uint8_t state = 0; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_TRANSMITMAILBOX(TransmitMailbox)); - switch (TransmitMailbox) - { - case (0): state |= (uint8_t)((CANx->TSR & TSR_RQCP0) << 2); - state |= (uint8_t)((CANx->TSR & TSR_TXOK0) >> 0); - state |= (uint8_t)((CANx->TSR & TSR_TME0) >> 26); - break; - case (1): state |= (uint8_t)((CANx->TSR & TSR_RQCP1) >> 6); - state |= (uint8_t)((CANx->TSR & TSR_TXOK1) >> 8); - state |= (uint8_t)((CANx->TSR & TSR_TME1) >> 27); - break; - case (2): state |= (uint8_t)((CANx->TSR & TSR_RQCP2) >> 14); - state |= (uint8_t)((CANx->TSR & TSR_TXOK2) >> 16); - state |= (uint8_t)((CANx->TSR & TSR_TME2) >> 28); - break; - default: - state = CANTXFAILED; - break; - } - switch (state) - { - /* transmit pending */ - case (0x0): state = CANTXPENDING; - break; - /* transmit failed */ - case (0x5): state = CANTXFAILED; - break; - /* transmit succedeed */ - case (0x7): state = CANTXOK; - break; - default: - state = CANTXFAILED; - break; - } - return state; -} - -/** - * @brief Cancels a transmit request. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param Mailbox: Mailbox number. - * @retval None. - */ -void CAN_CancelTransmit(CAN_TypeDef* CANx, uint8_t Mailbox) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_TRANSMITMAILBOX(Mailbox)); - /* abort transmission */ - switch (Mailbox) - { - case (0): CANx->TSR |= TSR_ABRQ0; - break; - case (1): CANx->TSR |= TSR_ABRQ1; - break; - case (2): CANx->TSR |= TSR_ABRQ2; - break; - default: - break; - } -} - -/** - * @brief Releases a FIFO. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param FIFONumber: FIFO to release, CAN_FIFO0 or CAN_FIFO1. - * @retval None. - */ -void CAN_FIFORelease(CAN_TypeDef* CANx, uint8_t FIFONumber) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FIFO(FIFONumber)); - /* Release FIFO0 */ - if (FIFONumber == CAN_FIFO0) - { - CANx->RF0R = RF0R_RFOM0; - } - /* Release FIFO1 */ - else /* FIFONumber == CAN_FIFO1 */ - { - CANx->RF1R = RF1R_RFOM1; - } -} - -/** - * @brief Returns the number of pending messages. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval NbMessage which is the number of pending message. - */ -uint8_t CAN_MessagePending(CAN_TypeDef* CANx, uint8_t FIFONumber) -{ - uint8_t message_pending=0; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FIFO(FIFONumber)); - if (FIFONumber == CAN_FIFO0) - { - message_pending = (uint8_t)(CANx->RF0R&(uint32_t)0x03); - } - else if (FIFONumber == CAN_FIFO1) - { - message_pending = (uint8_t)(CANx->RF1R&(uint32_t)0x03); - } - else - { - message_pending = 0; - } - return message_pending; -} - -/** - * @brief Receives a message. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param FIFONumber: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @param RxMessage: pointer to a structure receive message which - * contains CAN Id, CAN DLC, CAN datas and FMI number. - * @retval None. - */ -void CAN_Receive(CAN_TypeDef* CANx, uint8_t FIFONumber, CanRxMsg* RxMessage) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FIFO(FIFONumber)); - /* Get the Id */ - RxMessage->IDE = (uint8_t)0x04 & CANx->sFIFOMailBox[FIFONumber].RIR; - if (RxMessage->IDE == CAN_ID_STD) - { - RxMessage->StdId = (uint32_t)0x000007FF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 21); - } - else - { - RxMessage->ExtId = (uint32_t)0x1FFFFFFF & (CANx->sFIFOMailBox[FIFONumber].RIR >> 3); - } - - RxMessage->RTR = (uint8_t)0x02 & CANx->sFIFOMailBox[FIFONumber].RIR; - /* Get the DLC */ - RxMessage->DLC = (uint8_t)0x0F & CANx->sFIFOMailBox[FIFONumber].RDTR; - /* Get the FMI */ - RxMessage->FMI = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDTR >> 8); - /* Get the data field */ - RxMessage->Data[0] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDLR; - RxMessage->Data[1] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 8); - RxMessage->Data[2] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 16); - RxMessage->Data[3] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDLR >> 24); - RxMessage->Data[4] = (uint8_t)0xFF & CANx->sFIFOMailBox[FIFONumber].RDHR; - RxMessage->Data[5] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 8); - RxMessage->Data[6] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 16); - RxMessage->Data[7] = (uint8_t)0xFF & (CANx->sFIFOMailBox[FIFONumber].RDHR >> 24); - /* Release the FIFO */ - CAN_FIFORelease(CANx, FIFONumber); -} - -/** - * @brief Enables or disables the DBG Freeze for CAN. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param NewState: new state of the CAN peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void CAN_DBGFreeze(CAN_TypeDef* CANx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable Debug Freeze */ - CANx->MCR |= MCR_DBF; - } - else - { - /* Disable Debug Freeze */ - CANx->MCR &= ~MCR_DBF; - } -} - -/** - * @brief Enters the low power mode. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval CANSLEEPOK if sleep entered, CANSLEEPFAILED in an other case. - */ -uint8_t CAN_Sleep(CAN_TypeDef* CANx) -{ - uint8_t sleepstatus = CANSLEEPFAILED; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Request Sleep mode */ - CANx->MCR = (((CANx->MCR) & (uint32_t)(~MCR_INRQ)) | MCR_SLEEP); - - /* Sleep mode status */ - if ((CANx->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) == CAN_MSR_SLAK) - { - /* Sleep mode not entered */ - sleepstatus = CANSLEEPOK; - } - /* At this step, sleep mode status */ - return (uint8_t)sleepstatus; -} - -/** - * @brief Wakes the CAN up. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @retval CANWAKEUPOK if sleep mode left, CANWAKEUPFAILED in an other case. - */ -uint8_t CAN_WakeUp(CAN_TypeDef* CANx) -{ - uint32_t wait_slak = SLAK_TimeOut ; - uint8_t wakeupstatus = CANWAKEUPFAILED; - - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - - /* Wake up request */ - CANx->MCR &= ~MCR_SLEEP; - - /* Sleep mode status */ - while(((CANx->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)&&(wait_slak!=0x00)) - { - wait_slak--; - } - if((CANx->MSR & CAN_MSR_SLAK) != CAN_MSR_SLAK) - { - /* Sleep mode exited */ - wakeupstatus = CANWAKEUPOK; - } - /* At this step, sleep mode status */ - return (uint8_t)wakeupstatus; -} - -/** - * @brief Checks whether the specified CAN flag is set or not. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_FLAG: specifies the flag to check. - * This parameter can be: CAN_FLAG_EWG, CAN_FLAG_EPV or CAN_FLAG_BOF. - * @retval The new state of CAN_FLAG (SET or RESET). - */ -FlagStatus CAN_GetFlagStatus(CAN_TypeDef* CANx, uint32_t CAN_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FLAG(CAN_FLAG)); - /* Check the status of the specified CAN flag */ - if ((CANx->ESR & CAN_FLAG) != (uint32_t)RESET) - { - /* CAN_FLAG is set */ - bitstatus = SET; - } - else - { - /* CAN_FLAG is reset */ - bitstatus = RESET; - } - /* Return the CAN_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the CAN's pending flags. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_FLAG: specifies the flag to clear. - * @retval None. - */ -void CAN_ClearFlag(CAN_TypeDef* CANx, uint32_t CAN_FLAG) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_FLAG(CAN_FLAG)); - /* Clear the selected CAN flags */ - CANx->ESR &= ~CAN_FLAG; -} - -/** - * @brief Checks whether the specified CAN interrupt has occurred or not. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_IT: specifies the CAN interrupt source to check. - * This parameter can be: CAN_IT_RQCP0, CAN_IT_RQCP1, CAN_IT_RQCP2, - * CAN_IT_FF0, CAN_IT_FOV0, CAN_IT_FF1, - * CAN_IT_FOV1, CAN_IT_EWG, CAN_IT_EPV, - * CAN_IT_BOF, CAN_IT_WKU or CAN_IT_SLK. - * @retval The new state of CAN_IT (SET or RESET). - */ -ITStatus CAN_GetITStatus(CAN_TypeDef* CANx, uint32_t CAN_IT) -{ - ITStatus pendingbitstatus = RESET; - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_ITStatus(CAN_IT)); - switch (CAN_IT) - { - case CAN_IT_RQCP0: - pendingbitstatus = CheckITStatus(CANx->TSR, TSR_RQCP0); - break; - case CAN_IT_RQCP1: - pendingbitstatus = CheckITStatus(CANx->TSR, TSR_RQCP1); - break; - case CAN_IT_RQCP2: - pendingbitstatus = CheckITStatus(CANx->TSR, TSR_RQCP2); - break; - case CAN_IT_FF0: - pendingbitstatus = CheckITStatus(CANx->RF0R, RF0R_FULL0); - break; - case CAN_IT_FOV0: - pendingbitstatus = CheckITStatus(CANx->RF0R, RF0R_FOVR0); - break; - case CAN_IT_FF1: - pendingbitstatus = CheckITStatus(CANx->RF1R, RF1R_FULL1); - break; - case CAN_IT_FOV1: - pendingbitstatus = CheckITStatus(CANx->RF1R, RF1R_FOVR1); - break; - case CAN_IT_EWG: - pendingbitstatus = CheckITStatus(CANx->ESR, ESR_EWGF); - break; - case CAN_IT_EPV: - pendingbitstatus = CheckITStatus(CANx->ESR, ESR_EPVF); - break; - case CAN_IT_BOF: - pendingbitstatus = CheckITStatus(CANx->ESR, ESR_BOFF); - break; - case CAN_IT_SLK: - pendingbitstatus = CheckITStatus(CANx->MSR, MSR_SLAKI); - break; - case CAN_IT_WKU: - pendingbitstatus = CheckITStatus(CANx->MSR, MSR_WKUI); - break; - default : - pendingbitstatus = RESET; - break; - } - /* Return the CAN_IT status */ - return pendingbitstatus; -} - -/** - * @brief Clears the CAN’s interrupt pending bits. - * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. - * @param CAN_IT: specifies the interrupt pending bit to clear. - * @retval None. - */ -void CAN_ClearITPendingBit(CAN_TypeDef* CANx, uint32_t CAN_IT) -{ - /* Check the parameters */ - assert_param(IS_CAN_ALL_PERIPH(CANx)); - assert_param(IS_CAN_ITStatus(CAN_IT)); - switch (CAN_IT) - { - case CAN_IT_RQCP0: - CANx->TSR = TSR_RQCP0; /* rc_w1*/ - break; - case CAN_IT_RQCP1: - CANx->TSR = TSR_RQCP1; /* rc_w1*/ - break; - case CAN_IT_RQCP2: - CANx->TSR = TSR_RQCP2; /* rc_w1*/ - break; - case CAN_IT_FF0: - CANx->RF0R = RF0R_FULL0; /* rc_w1*/ - break; - case CAN_IT_FOV0: - CANx->RF0R = RF0R_FOVR0; /* rc_w1*/ - break; - case CAN_IT_FF1: - CANx->RF1R = RF1R_FULL1; /* rc_w1*/ - break; - case CAN_IT_FOV1: - CANx->RF1R = RF1R_FOVR1; /* rc_w1*/ - break; - case CAN_IT_EWG: - CANx->ESR &= ~ ESR_EWGF; /* rw */ - break; - case CAN_IT_EPV: - CANx->ESR &= ~ ESR_EPVF; /* rw */ - break; - case CAN_IT_BOF: - CANx->ESR &= ~ ESR_BOFF; /* rw */ - break; - case CAN_IT_WKU: - CANx->MSR = MSR_WKUI; /* rc_w1*/ - break; - case CAN_IT_SLK: - CANx->MSR = MSR_SLAKI; /* rc_w1*/ - break; - default : - break; - } -} - -/** - * @brief Checks whether the CAN interrupt has occurred or not. - * @param CAN_Reg: specifies the CAN interrupt register to check. - * @param It_Bit: specifies the interrupt source bit to check. - * @retval The new state of the CAN Interrupt (SET or RESET). - */ -static ITStatus CheckITStatus(uint32_t CAN_Reg, uint32_t It_Bit) -{ - ITStatus pendingbitstatus = RESET; - - if ((CAN_Reg & It_Bit) != (uint32_t)RESET) - { - /* CAN_IT is set */ - pendingbitstatus = SET; - } - else - { - /* CAN_IT is reset */ - pendingbitstatus = RESET; - } - return pendingbitstatus; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c deleted file mode 100644 index ba665c9aa..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_crc.c +++ /dev/null @@ -1,163 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_crc.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the CRC firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_crc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup CRC - * @brief CRC driver modules - * @{ - */ - -/** @defgroup CRC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Private_Defines - * @{ - */ - -/* CR register bit mask */ - -#define CR_RESET_Set ((uint32_t)0x00000001) - -/** - * @} - */ - -/** @defgroup CRC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup CRC_Private_Functions - * @{ - */ - -/** - * @brief Resets the CRC Data register (DR). - * @param None - * @retval None - */ -void CRC_ResetDR(void) -{ - /* Reset CRC generator */ - CRC->CR = CR_RESET_Set; -} - -/** - * @brief Computes the 32-bit CRC of a given data word(32-bit). - * @param Data: data word(32-bit) to compute its CRC - * @retval 32-bit CRC - */ -uint32_t CRC_CalcCRC(uint32_t Data) -{ - CRC->DR = Data; - - return (CRC->DR); -} - -/** - * @brief Computes the 32-bit CRC of a given buffer of data word(32-bit). - * @param pBuffer: pointer to the buffer containing the data to be computed - * @param BufferLength: length of the buffer to be computed - * @retval 32-bit CRC - */ -uint32_t CRC_CalcBlockCRC(uint32_t pBuffer[], uint32_t BufferLength) -{ - uint32_t index = 0; - - for(index = 0; index < BufferLength; index++) - { - CRC->DR = pBuffer[index]; - } - return (CRC->DR); -} - -/** - * @brief Returns the current CRC value. - * @param None - * @retval 32-bit CRC - */ -uint32_t CRC_GetCRC(void) -{ - return (CRC->DR); -} - -/** - * @brief Stores a 8-bit data in the Independent Data(ID) register. - * @param IDValue: 8-bit value to be stored in the ID register - * @retval None - */ -void CRC_SetIDRegister(uint8_t IDValue) -{ - CRC->IDR = IDValue; -} - -/** - * @brief Returns the 8-bit data stored in the Independent Data(ID) register - * @param None - * @retval 8-bit value of the ID register - */ -uint8_t CRC_GetIDRegister(void) -{ - return (CRC->IDR); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c deleted file mode 100644 index 84f5d10d6..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dac.c +++ /dev/null @@ -1,431 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dac.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the DAC firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dac.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup DAC - * @brief DAC driver modules - * @{ - */ - -/** @defgroup DAC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup DAC_Private_Defines - * @{ - */ - -/* DAC EN mask */ -#define CR_EN_Set ((uint32_t)0x00000001) - -/* DAC DMAEN mask */ -#define CR_DMAEN_Set ((uint32_t)0x00001000) - -/* CR register Mask */ -#define CR_CLEAR_Mask ((uint32_t)0x00000FFE) - -/* DAC SWTRIG mask */ -#define SWTRIGR_SWTRIG_Set ((uint32_t)0x00000001) - -/* DAC Dual Channels SWTRIG masks */ -#define DUAL_SWTRIG_Set ((uint32_t)0x00000003) -#define DUAL_SWTRIG_Reset ((uint32_t)0xFFFFFFFC) - -/* DHR registers offsets */ -#define DHR12R1_Offset ((uint32_t)0x00000008) -#define DHR12R2_Offset ((uint32_t)0x00000014) -#define DHR12RD_Offset ((uint32_t)0x00000020) - -/* DOR register offset */ -#define DOR_Offset ((uint32_t)0x0000002C) -/** - * @} - */ - -/** @defgroup DAC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DAC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup DAC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup DAC_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the DAC peripheral registers to their default reset values. - * @param None - * @retval None - */ -void DAC_DeInit(void) -{ - /* Enable DAC reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, ENABLE); - /* Release DAC from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_DAC, DISABLE); -} - -/** - * @brief Initializes the DAC peripheral according to the specified - * parameters in the DAC_InitStruct. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_InitStruct: pointer to a DAC_InitTypeDef structure that - * contains the configuration information for the specified DAC channel. - * @retval None - */ -void DAC_Init(uint32_t DAC_Channel, DAC_InitTypeDef* DAC_InitStruct) -{ - uint32_t tmpreg1 = 0, tmpreg2 = 0; - /* Check the DAC parameters */ - assert_param(IS_DAC_TRIGGER(DAC_InitStruct->DAC_Trigger)); - assert_param(IS_DAC_GENERATE_WAVE(DAC_InitStruct->DAC_WaveGeneration)); - assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude)); - assert_param(IS_DAC_OUTPUT_BUFFER_STATE(DAC_InitStruct->DAC_OutputBuffer)); -/*---------------------------- DAC CR Configuration --------------------------*/ - /* Get the DAC CR value */ - tmpreg1 = DAC->CR; - /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */ - tmpreg1 &= ~(CR_CLEAR_Mask << DAC_Channel); - /* Configure for the selected DAC channel: buffer output, trigger, wave genration, - mask/amplitude for wave genration */ - /* Set TSELx and TENx bits according to DAC_Trigger value */ - /* Set WAVEx bits according to DAC_WaveGeneration value */ - /* Set MAMPx bits according to DAC_LFSRUnmask_TriangleAmplitude value */ - /* Set BOFFx bit according to DAC_OutputBuffer value */ - tmpreg2 = (DAC_InitStruct->DAC_Trigger | DAC_InitStruct->DAC_WaveGeneration | - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude | DAC_InitStruct->DAC_OutputBuffer); - /* Calculate CR register value depending on DAC_Channel */ - tmpreg1 |= tmpreg2 << DAC_Channel; - /* Write to DAC CR */ - DAC->CR = tmpreg1; -} - -/** - * @brief Fills each DAC_InitStruct member with its default value. - * @param DAC_InitStruct : pointer to a DAC_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct) -{ -/*--------------- Reset DAC init structure parameters values -----------------*/ - /* Initialize the DAC_Trigger member */ - DAC_InitStruct->DAC_Trigger = DAC_Trigger_None; - /* Initialize the DAC_WaveGeneration member */ - DAC_InitStruct->DAC_WaveGeneration = DAC_WaveGeneration_None; - /* Initialize the DAC_LFSRUnmask_TriangleAmplitude member */ - DAC_InitStruct->DAC_LFSRUnmask_TriangleAmplitude = DAC_LFSRUnmask_Bit0; - /* Initialize the DAC_OutputBuffer member */ - DAC_InitStruct->DAC_OutputBuffer = DAC_OutputBuffer_Enable; -} - -/** - * @brief Enables or disables the specified DAC channel. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param NewState: new state of the DAC channel. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_Cmd(uint32_t DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected DAC channel */ - DAC->CR |= CR_EN_Set << DAC_Channel; - } - else - { - /* Disable the selected DAC channel */ - DAC->CR &= ~(CR_EN_Set << DAC_Channel); - } -} - -/** - * @brief Enables or disables the specified DAC channel DMA request. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param NewState: new state of the selected DAC channel DMA request. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_DMACmd(uint32_t DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected DAC channel DMA request */ - DAC->CR |= CR_DMAEN_Set << DAC_Channel; - } - else - { - /* Disable the selected DAC channel DMA request */ - DAC->CR &= ~(CR_DMAEN_Set << DAC_Channel); - } -} - -/** - * @brief Enables or disables the selected DAC channel software trigger. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param NewState: new state of the selected DAC channel software trigger. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_SoftwareTriggerCmd(uint32_t DAC_Channel, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable software trigger for the selected DAC channel */ - DAC->SWTRIGR |= SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4); - } - else - { - /* Disable software trigger for the selected DAC channel */ - DAC->SWTRIGR &= ~(SWTRIGR_SWTRIG_Set << (DAC_Channel >> 4)); - } -} - -/** - * @brief Enables or disables simultaneously the two DAC channels software - * triggers. - * @param NewState: new state of the DAC channels software triggers. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_DualSoftwareTriggerCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable software trigger for both DAC channels */ - DAC->SWTRIGR |= DUAL_SWTRIG_Set ; - } - else - { - /* Disable software trigger for both DAC channels */ - DAC->SWTRIGR &= DUAL_SWTRIG_Reset; - } -} - -/** - * @brief Enables or disables the selected DAC channel wave generation. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @param DAC_Wave: Specifies the wave type to enable or disable. - * This parameter can be one of the following values: - * @arg DAC_Wave_Noise: noise wave generation - * @arg DAC_Wave_Triangle: triangle wave generation - * @param NewState: new state of the selected DAC channel wave generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DAC_WaveGenerationCmd(uint32_t DAC_Channel, uint32_t DAC_Wave, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - assert_param(IS_DAC_WAVE(DAC_Wave)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected wave generation for the selected DAC channel */ - DAC->CR |= DAC_Wave << DAC_Channel; - } - else - { - /* Disable the selected wave generation for the selected DAC channel */ - DAC->CR &= ~(DAC_Wave << DAC_Channel); - } -} - -/** - * @brief Set the specified data holding register value for DAC channel1. - * @param DAC_Align: Specifies the data alignement for DAC channel1. - * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignement selected - * @arg DAC_Align_12b_L: 12bit left data alignement selected - * @arg DAC_Align_12b_R: 12bit right data alignement selected - * @param Data : Data to be loaded in the selected data holding register. - * @retval None - */ -void DAC_SetChannel1Data(uint32_t DAC_Align, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - tmp = (uint32_t)DAC_BASE; - tmp += DHR12R1_Offset + DAC_Align; - - /* Set the DAC channel1 selected data holding register */ - *(__IO uint32_t *) tmp = Data; -} - -/** - * @brief Set the specified data holding register value for DAC channel2. - * @param DAC_Align: Specifies the data alignement for DAC channel2. - * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignement selected - * @arg DAC_Align_12b_L: 12bit left data alignement selected - * @arg DAC_Align_12b_R: 12bit right data alignement selected - * @param Data : Data to be loaded in the selected data holding register. - * @retval None - */ -void DAC_SetChannel2Data(uint32_t DAC_Align, uint16_t Data) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data)); - - tmp = (uint32_t)DAC_BASE; - tmp += DHR12R2_Offset + DAC_Align; - - /* Set the DAC channel2 selected data holding register */ - *(__IO uint32_t *)tmp = Data; -} - -/** - * @brief Set the specified data holding register value for dual channel - * DAC. - * @param DAC_Align: Specifies the data alignement for dual channel DAC. - * This parameter can be one of the following values: - * @arg DAC_Align_8b_R: 8bit right data alignement selected - * @arg DAC_Align_12b_L: 12bit left data alignement selected - * @arg DAC_Align_12b_R: 12bit right data alignement selected - * @param Data2: Data for DAC Channel2 to be loaded in the selected data - * holding register. - * @param Data1: Data for DAC Channel1 to be loaded in the selected data - * holding register. - * @retval None - */ -void DAC_SetDualChannelData(uint32_t DAC_Align, uint16_t Data2, uint16_t Data1) -{ - uint32_t data = 0, tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_ALIGN(DAC_Align)); - assert_param(IS_DAC_DATA(Data1)); - assert_param(IS_DAC_DATA(Data2)); - - /* Calculate and set dual DAC data holding register value */ - if (DAC_Align == DAC_Align_8b_R) - { - data = ((uint32_t)Data2 << 8) | Data1; - } - else - { - data = ((uint32_t)Data2 << 16) | Data1; - } - - tmp = (uint32_t)DAC_BASE; - tmp += DHR12RD_Offset + DAC_Align; - - /* Set the dual DAC selected data holding register */ - *(__IO uint32_t *)tmp = data; -} - -/** - * @brief Returns the last data output value of the selected DAC cahnnel. - * @param DAC_Channel: the selected DAC channel. - * This parameter can be one of the following values: - * @arg DAC_Channel_1: DAC Channel1 selected - * @arg DAC_Channel_2: DAC Channel2 selected - * @retval The selected DAC channel data output value. - */ -uint16_t DAC_GetDataOutputValue(uint32_t DAC_Channel) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_DAC_CHANNEL(DAC_Channel)); - - tmp = (uint32_t) DAC_BASE ; - tmp += DOR_Offset + ((uint32_t)DAC_Channel >> 2); - - /* Returns the DAC channel data output register value */ - return (uint16_t) (*(__IO uint32_t*) tmp); -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c deleted file mode 100644 index 7deea2caa..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dbgmcu.c +++ /dev/null @@ -1,152 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dbgmcu.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the DBGMCU firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dbgmcu.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup DBGMCU - * @brief DBGMCU driver modules - * @{ - */ - -/** @defgroup DBGMCU_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Defines - * @{ - */ - -#define IDCODE_DEVID_Mask ((uint32_t)0x00000FFF) -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup DBGMCU_Private_Functions - * @{ - */ - -/** - * @brief Returns the device revision identifier. - * @param None - * @retval Device revision identifier - */ -uint32_t DBGMCU_GetREVID(void) -{ - return(DBGMCU->IDCODE >> 16); -} - -/** - * @brief Returns the device identifier. - * @param None - * @retval Device identifier - */ -uint32_t DBGMCU_GetDEVID(void) -{ - return(DBGMCU->IDCODE & IDCODE_DEVID_Mask); -} - -/** - * @brief Configures the specified peripheral and low power mode behavior - * when the MCU under Debug mode. - * @param DBGMCU_Periph: specifies the peripheral and low power mode. - * This parameter can be any combination of the following values: - * @arg DBGMCU_SLEEP: Keep debugger connection during SLEEP mode - * @arg DBGMCU_STOP: Keep debugger connection during STOP mode - * @arg DBGMCU_STANDBY: Keep debugger connection during STANDBY mode - * @arg DBGMCU_IWDG_STOP: Debug IWDG stopped when Core is halted - * @arg DBGMCU_WWDG_STOP: Debug WWDG stopped when Core is halted - * @arg DBGMCU_TIM1_STOP: TIM1 counter stopped when Core is halted - * @arg DBGMCU_TIM2_STOP: TIM2 counter stopped when Core is halted - * @arg DBGMCU_TIM3_STOP: TIM3 counter stopped when Core is halted - * @arg DBGMCU_TIM4_STOP: TIM4 counter stopped when Core is halted - * @arg DBGMCU_CAN1_STOP: Debug CAN2 stopped when Core is halted - * @arg DBGMCU_I2C1_SMBUS_TIMEOUT: I2C1 SMBUS timeout mode stopped when Core is halted - * @arg DBGMCU_I2C2_SMBUS_TIMEOUT: I2C2 SMBUS timeout mode stopped when Core is halted - * @arg DBGMCU_TIM5_STOP: TIM5 counter stopped when Core is halted - * @arg DBGMCU_TIM6_STOP: TIM6 counter stopped when Core is halted - * @arg DBGMCU_TIM7_STOP: TIM7 counter stopped when Core is halted - * @arg DBGMCU_TIM8_STOP: TIM8 counter stopped when Core is halted - * @arg DBGMCU_CAN2_STOP: Debug CAN2 stopped when Core is halted - * @param NewState: new state of the specified peripheral in Debug mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DBGMCU_Config(uint32_t DBGMCU_Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DBGMCU_PERIPH(DBGMCU_Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - DBGMCU->CR |= DBGMCU_Periph; - } - else - { - DBGMCU->CR &= ~DBGMCU_Periph; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c deleted file mode 100644 index 147a88888..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_dma.c +++ /dev/null @@ -1,693 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_dma.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the DMA firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_dma.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup DMA - * @brief DMA driver modules - * @{ - */ - -/** @defgroup DMA_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - -/** @defgroup DMA_Private_Defines - * @{ - */ - -/* DMA ENABLE mask */ -#define CCR_ENABLE_Set ((uint32_t)0x00000001) -#define CCR_ENABLE_Reset ((uint32_t)0xFFFFFFFE) - -/* DMA1 Channelx interrupt pending bit masks */ -#define DMA1_Channel1_IT_Mask ((uint32_t)0x0000000F) -#define DMA1_Channel2_IT_Mask ((uint32_t)0x000000F0) -#define DMA1_Channel3_IT_Mask ((uint32_t)0x00000F00) -#define DMA1_Channel4_IT_Mask ((uint32_t)0x0000F000) -#define DMA1_Channel5_IT_Mask ((uint32_t)0x000F0000) -#define DMA1_Channel6_IT_Mask ((uint32_t)0x00F00000) -#define DMA1_Channel7_IT_Mask ((uint32_t)0x0F000000) - -/* DMA2 Channelx interrupt pending bit masks */ -#define DMA2_Channel1_IT_Mask ((uint32_t)0x0000000F) -#define DMA2_Channel2_IT_Mask ((uint32_t)0x000000F0) -#define DMA2_Channel3_IT_Mask ((uint32_t)0x00000F00) -#define DMA2_Channel4_IT_Mask ((uint32_t)0x0000F000) -#define DMA2_Channel5_IT_Mask ((uint32_t)0x000F0000) - -/* DMA2 FLAG mask */ -#define FLAG_Mask ((uint32_t)0x10000000) - -/* DMA registers Masks */ -#define CCR_CLEAR_Mask ((uint32_t)0xFFFF800F) - -/** - * @} - */ - -/** @defgroup DMA_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup DMA_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the DMAy Channelx registers to their default reset - * values. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @retval None - */ -void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= CCR_ENABLE_Reset; - /* Reset DMAy Channelx control register */ - DMAy_Channelx->CCR = 0; - - /* Reset DMAy Channelx remaining bytes register */ - DMAy_Channelx->CNDTR = 0; - - /* Reset DMAy Channelx peripheral address register */ - DMAy_Channelx->CPAR = 0; - - /* Reset DMAy Channelx memory address register */ - DMAy_Channelx->CMAR = 0; - - if (DMAy_Channelx == DMA1_Channel1) - { - /* Reset interrupt pending bits for DMA1 Channel1 */ - DMA1->IFCR |= DMA1_Channel1_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel2) - { - /* Reset interrupt pending bits for DMA1 Channel2 */ - DMA1->IFCR |= DMA1_Channel2_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel3) - { - /* Reset interrupt pending bits for DMA1 Channel3 */ - DMA1->IFCR |= DMA1_Channel3_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel4) - { - /* Reset interrupt pending bits for DMA1 Channel4 */ - DMA1->IFCR |= DMA1_Channel4_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel5) - { - /* Reset interrupt pending bits for DMA1 Channel5 */ - DMA1->IFCR |= DMA1_Channel5_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel6) - { - /* Reset interrupt pending bits for DMA1 Channel6 */ - DMA1->IFCR |= DMA1_Channel6_IT_Mask; - } - else if (DMAy_Channelx == DMA1_Channel7) - { - /* Reset interrupt pending bits for DMA1 Channel7 */ - DMA1->IFCR |= DMA1_Channel7_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel1) - { - /* Reset interrupt pending bits for DMA2 Channel1 */ - DMA2->IFCR |= DMA2_Channel1_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel2) - { - /* Reset interrupt pending bits for DMA2 Channel2 */ - DMA2->IFCR |= DMA2_Channel2_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel3) - { - /* Reset interrupt pending bits for DMA2 Channel3 */ - DMA2->IFCR |= DMA2_Channel3_IT_Mask; - } - else if (DMAy_Channelx == DMA2_Channel4) - { - /* Reset interrupt pending bits for DMA2 Channel4 */ - DMA2->IFCR |= DMA2_Channel4_IT_Mask; - } - else - { - if (DMAy_Channelx == DMA2_Channel5) - { - /* Reset interrupt pending bits for DMA2 Channel5 */ - DMA2->IFCR |= DMA2_Channel5_IT_Mask; - } - } -} - -/** - * @brief Initializes the DMAy Channelx according to the specified - * parameters in the DMA_InitStruct. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param DMA_InitStruct: pointer to a DMA_InitTypeDef structure that - * contains the configuration information for the specified DMA Channel. - * @retval None - */ -void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_DIR(DMA_InitStruct->DMA_DIR)); - assert_param(IS_DMA_BUFFER_SIZE(DMA_InitStruct->DMA_BufferSize)); - assert_param(IS_DMA_PERIPHERAL_INC_STATE(DMA_InitStruct->DMA_PeripheralInc)); - assert_param(IS_DMA_MEMORY_INC_STATE(DMA_InitStruct->DMA_MemoryInc)); - assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(DMA_InitStruct->DMA_PeripheralDataSize)); - assert_param(IS_DMA_MEMORY_DATA_SIZE(DMA_InitStruct->DMA_MemoryDataSize)); - assert_param(IS_DMA_MODE(DMA_InitStruct->DMA_Mode)); - assert_param(IS_DMA_PRIORITY(DMA_InitStruct->DMA_Priority)); - assert_param(IS_DMA_M2M_STATE(DMA_InitStruct->DMA_M2M)); - -/*--------------------------- DMAy Channelx CCR Configuration -----------------*/ - /* Get the DMAy_Channelx CCR value */ - tmpreg = DMAy_Channelx->CCR; - /* Clear MEM2MEM, PL, MSIZE, PSIZE, MINC, PINC, CIRC and DIR bits */ - tmpreg &= CCR_CLEAR_Mask; - /* Configure DMAy Channelx: data transfer, data size, priority level and mode */ - /* Set DIR bit according to DMA_DIR value */ - /* Set CIRC bit according to DMA_Mode value */ - /* Set PINC bit according to DMA_PeripheralInc value */ - /* Set MINC bit according to DMA_MemoryInc value */ - /* Set PSIZE bits according to DMA_PeripheralDataSize value */ - /* Set MSIZE bits according to DMA_MemoryDataSize value */ - /* Set PL bits according to DMA_Priority value */ - /* Set the MEM2MEM bit according to DMA_M2M value */ - tmpreg |= DMA_InitStruct->DMA_DIR | DMA_InitStruct->DMA_Mode | - DMA_InitStruct->DMA_PeripheralInc | DMA_InitStruct->DMA_MemoryInc | - DMA_InitStruct->DMA_PeripheralDataSize | DMA_InitStruct->DMA_MemoryDataSize | - DMA_InitStruct->DMA_Priority | DMA_InitStruct->DMA_M2M; - - /* Write to DMAy Channelx CCR */ - DMAy_Channelx->CCR = tmpreg; - -/*--------------------------- DMAy Channelx CNDTR Configuration ---------------*/ - /* Write to DMAy Channelx CNDTR */ - DMAy_Channelx->CNDTR = DMA_InitStruct->DMA_BufferSize; - -/*--------------------------- DMAy Channelx CPAR Configuration ----------------*/ - /* Write to DMAy Channelx CPAR */ - DMAy_Channelx->CPAR = DMA_InitStruct->DMA_PeripheralBaseAddr; - -/*--------------------------- DMAy Channelx CMAR Configuration ----------------*/ - /* Write to DMAy Channelx CMAR */ - DMAy_Channelx->CMAR = DMA_InitStruct->DMA_MemoryBaseAddr; -} - -/** - * @brief Fills each DMA_InitStruct member with its default value. - * @param DMA_InitStruct : pointer to a DMA_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct) -{ -/*-------------- Reset DMA init structure parameters values ------------------*/ - /* Initialize the DMA_PeripheralBaseAddr member */ - DMA_InitStruct->DMA_PeripheralBaseAddr = 0; - /* Initialize the DMA_MemoryBaseAddr member */ - DMA_InitStruct->DMA_MemoryBaseAddr = 0; - /* Initialize the DMA_DIR member */ - DMA_InitStruct->DMA_DIR = DMA_DIR_PeripheralSRC; - /* Initialize the DMA_BufferSize member */ - DMA_InitStruct->DMA_BufferSize = 0; - /* Initialize the DMA_PeripheralInc member */ - DMA_InitStruct->DMA_PeripheralInc = DMA_PeripheralInc_Disable; - /* Initialize the DMA_MemoryInc member */ - DMA_InitStruct->DMA_MemoryInc = DMA_MemoryInc_Disable; - /* Initialize the DMA_PeripheralDataSize member */ - DMA_InitStruct->DMA_PeripheralDataSize = DMA_PeripheralDataSize_Byte; - /* Initialize the DMA_MemoryDataSize member */ - DMA_InitStruct->DMA_MemoryDataSize = DMA_MemoryDataSize_Byte; - /* Initialize the DMA_Mode member */ - DMA_InitStruct->DMA_Mode = DMA_Mode_Normal; - /* Initialize the DMA_Priority member */ - DMA_InitStruct->DMA_Priority = DMA_Priority_Low; - /* Initialize the DMA_M2M member */ - DMA_InitStruct->DMA_M2M = DMA_M2M_Disable; -} - -/** - * @brief Enables or disables the specified DMAy Channelx. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param NewState: new state of the DMAy Channelx. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected DMAy Channelx */ - DMAy_Channelx->CCR |= CCR_ENABLE_Set; - } - else - { - /* Disable the selected DMAy Channelx */ - DMAy_Channelx->CCR &= CCR_ENABLE_Reset; - } -} - -/** - * @brief Enables or disables the specified DMAy Channelx interrupts. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @param DMA_IT: specifies the DMA interrupts sources to be enabled - * or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask - * @arg DMA_IT_HT: Half transfer interrupt mask - * @arg DMA_IT_TE: Transfer error interrupt mask - * @param NewState: new state of the specified DMA interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, uint32_t DMA_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - assert_param(IS_DMA_CONFIG_IT(DMA_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected DMA interrupts */ - DMAy_Channelx->CCR |= DMA_IT; - } - else - { - /* Disable the selected DMA interrupts */ - DMAy_Channelx->CCR &= ~DMA_IT; - } -} - -/** - * @brief Returns the number of remaining data units in the current - * DMAy Channelx transfer. - * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and - * x can be 1 to 7 for DMA1 and 1 to 5 for DMA2 to select the DMA Channel. - * @retval The number of remaining data units in the current DMAy Channelx - * transfer. - */ -uint16_t DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx) -{ - /* Check the parameters */ - assert_param(IS_DMA_ALL_PERIPH(DMAy_Channelx)); - /* Return the number of remaining data units for DMAy Channelx */ - return ((uint16_t)(DMAy_Channelx->CNDTR)); -} - -/** - * @brief Checks whether the specified DMAy Channelx flag is set or not. - * @param DMA_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. - * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. - * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. - * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. - * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. - * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. - * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. - * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. - * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. - * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. - * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. - * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. - * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. - * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. - * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. - * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. - * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. - * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. - * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. - * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. - * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. - * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. - * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. - * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. - * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. - * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. - * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. - * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. - * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. - * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. - * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. - * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. - * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. - * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. - * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. - * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. - * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. - * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. - * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. - * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. - * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. - * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. - * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. - * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. - * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. - * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. - * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. - * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. - * @retval The new state of DMA_FLAG (SET or RESET). - */ -FlagStatus DMA_GetFlagStatus(uint32_t DMA_FLAG) -{ - FlagStatus bitstatus = RESET; - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_DMA_GET_FLAG(DMA_FLAG)); - - /* Calculate the used DMA */ - if ((DMA_FLAG & FLAG_Mask) != (uint32_t)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMA flag */ - if ((tmpreg & DMA_FLAG) != (uint32_t)RESET) - { - /* DMA_FLAG is set */ - bitstatus = SET; - } - else - { - /* DMA_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the DMA_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the DMAy Channelx's pending flags. - * @param DMA_FLAG: specifies the flag to clear. - * This parameter can be any combination (for the same DMA) of the following values: - * @arg DMA1_FLAG_GL1: DMA1 Channel1 global flag. - * @arg DMA1_FLAG_TC1: DMA1 Channel1 transfer complete flag. - * @arg DMA1_FLAG_HT1: DMA1 Channel1 half transfer flag. - * @arg DMA1_FLAG_TE1: DMA1 Channel1 transfer error flag. - * @arg DMA1_FLAG_GL2: DMA1 Channel2 global flag. - * @arg DMA1_FLAG_TC2: DMA1 Channel2 transfer complete flag. - * @arg DMA1_FLAG_HT2: DMA1 Channel2 half transfer flag. - * @arg DMA1_FLAG_TE2: DMA1 Channel2 transfer error flag. - * @arg DMA1_FLAG_GL3: DMA1 Channel3 global flag. - * @arg DMA1_FLAG_TC3: DMA1 Channel3 transfer complete flag. - * @arg DMA1_FLAG_HT3: DMA1 Channel3 half transfer flag. - * @arg DMA1_FLAG_TE3: DMA1 Channel3 transfer error flag. - * @arg DMA1_FLAG_GL4: DMA1 Channel4 global flag. - * @arg DMA1_FLAG_TC4: DMA1 Channel4 transfer complete flag. - * @arg DMA1_FLAG_HT4: DMA1 Channel4 half transfer flag. - * @arg DMA1_FLAG_TE4: DMA1 Channel4 transfer error flag. - * @arg DMA1_FLAG_GL5: DMA1 Channel5 global flag. - * @arg DMA1_FLAG_TC5: DMA1 Channel5 transfer complete flag. - * @arg DMA1_FLAG_HT5: DMA1 Channel5 half transfer flag. - * @arg DMA1_FLAG_TE5: DMA1 Channel5 transfer error flag. - * @arg DMA1_FLAG_GL6: DMA1 Channel6 global flag. - * @arg DMA1_FLAG_TC6: DMA1 Channel6 transfer complete flag. - * @arg DMA1_FLAG_HT6: DMA1 Channel6 half transfer flag. - * @arg DMA1_FLAG_TE6: DMA1 Channel6 transfer error flag. - * @arg DMA1_FLAG_GL7: DMA1 Channel7 global flag. - * @arg DMA1_FLAG_TC7: DMA1 Channel7 transfer complete flag. - * @arg DMA1_FLAG_HT7: DMA1 Channel7 half transfer flag. - * @arg DMA1_FLAG_TE7: DMA1 Channel7 transfer error flag. - * @arg DMA2_FLAG_GL1: DMA2 Channel1 global flag. - * @arg DMA2_FLAG_TC1: DMA2 Channel1 transfer complete flag. - * @arg DMA2_FLAG_HT1: DMA2 Channel1 half transfer flag. - * @arg DMA2_FLAG_TE1: DMA2 Channel1 transfer error flag. - * @arg DMA2_FLAG_GL2: DMA2 Channel2 global flag. - * @arg DMA2_FLAG_TC2: DMA2 Channel2 transfer complete flag. - * @arg DMA2_FLAG_HT2: DMA2 Channel2 half transfer flag. - * @arg DMA2_FLAG_TE2: DMA2 Channel2 transfer error flag. - * @arg DMA2_FLAG_GL3: DMA2 Channel3 global flag. - * @arg DMA2_FLAG_TC3: DMA2 Channel3 transfer complete flag. - * @arg DMA2_FLAG_HT3: DMA2 Channel3 half transfer flag. - * @arg DMA2_FLAG_TE3: DMA2 Channel3 transfer error flag. - * @arg DMA2_FLAG_GL4: DMA2 Channel4 global flag. - * @arg DMA2_FLAG_TC4: DMA2 Channel4 transfer complete flag. - * @arg DMA2_FLAG_HT4: DMA2 Channel4 half transfer flag. - * @arg DMA2_FLAG_TE4: DMA2 Channel4 transfer error flag. - * @arg DMA2_FLAG_GL5: DMA2 Channel5 global flag. - * @arg DMA2_FLAG_TC5: DMA2 Channel5 transfer complete flag. - * @arg DMA2_FLAG_HT5: DMA2 Channel5 half transfer flag. - * @arg DMA2_FLAG_TE5: DMA2 Channel5 transfer error flag. - * @retval None - */ -void DMA_ClearFlag(uint32_t DMA_FLAG) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_FLAG(DMA_FLAG)); - /* Calculate the used DMA */ - - if ((DMA_FLAG & FLAG_Mask) != (uint32_t)RESET) - { - /* Clear the selected DMA flags */ - DMA2->IFCR = DMA_FLAG; - } - else - { - /* Clear the selected DMA flags */ - DMA1->IFCR = DMA_FLAG; - } -} - -/** - * @brief Checks whether the specified DMAy Channelx interrupt has occurred or not. - * @param DMA_IT: specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. - * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. - * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. - * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. - * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. - * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. - * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. - * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. - * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. - * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. - * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. - * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. - * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. - * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. - * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. - * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. - * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. - * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. - * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. - * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. - * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. - * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. - * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. - * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. - * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. - * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. - * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. - * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. - * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. - * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. - * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. - * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. - * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. - * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. - * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. - * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. - * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. - * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. - * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. - * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. - * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. - * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. - * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. - * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. - * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. - * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. - * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. - * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. - * @retval The new state of DMA_IT (SET or RESET). - */ -ITStatus DMA_GetITStatus(uint32_t DMA_IT) -{ - ITStatus bitstatus = RESET; - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_DMA_GET_IT(DMA_IT)); - - /* Calculate the used DMA */ - if ((DMA_IT & FLAG_Mask) != (uint32_t)RESET) - { - /* Get DMA2 ISR register value */ - tmpreg = DMA2->ISR ; - } - else - { - /* Get DMA1 ISR register value */ - tmpreg = DMA1->ISR ; - } - - /* Check the status of the specified DMA interrupt */ - if ((tmpreg & DMA_IT) != (uint32_t)RESET) - { - /* DMA_IT is set */ - bitstatus = SET; - } - else - { - /* DMA_IT is reset */ - bitstatus = RESET; - } - /* Return the DMA_IT status */ - return bitstatus; -} - -/** - * @brief Clears the DMAy Channelx’s interrupt pending bits. - * @param DMA_IT: specifies the DMA interrupt pending bit to clear. - * This parameter can be any combination (for the same DMA) of the following values: - * @arg DMA1_IT_GL1: DMA1 Channel1 global interrupt. - * @arg DMA1_IT_TC1: DMA1 Channel1 transfer complete interrupt. - * @arg DMA1_IT_HT1: DMA1 Channel1 half transfer interrupt. - * @arg DMA1_IT_TE1: DMA1 Channel1 transfer error interrupt. - * @arg DMA1_IT_GL2: DMA1 Channel2 global interrupt. - * @arg DMA1_IT_TC2: DMA1 Channel2 transfer complete interrupt. - * @arg DMA1_IT_HT2: DMA1 Channel2 half transfer interrupt. - * @arg DMA1_IT_TE2: DMA1 Channel2 transfer error interrupt. - * @arg DMA1_IT_GL3: DMA1 Channel3 global interrupt. - * @arg DMA1_IT_TC3: DMA1 Channel3 transfer complete interrupt. - * @arg DMA1_IT_HT3: DMA1 Channel3 half transfer interrupt. - * @arg DMA1_IT_TE3: DMA1 Channel3 transfer error interrupt. - * @arg DMA1_IT_GL4: DMA1 Channel4 global interrupt. - * @arg DMA1_IT_TC4: DMA1 Channel4 transfer complete interrupt. - * @arg DMA1_IT_HT4: DMA1 Channel4 half transfer interrupt. - * @arg DMA1_IT_TE4: DMA1 Channel4 transfer error interrupt. - * @arg DMA1_IT_GL5: DMA1 Channel5 global interrupt. - * @arg DMA1_IT_TC5: DMA1 Channel5 transfer complete interrupt. - * @arg DMA1_IT_HT5: DMA1 Channel5 half transfer interrupt. - * @arg DMA1_IT_TE5: DMA1 Channel5 transfer error interrupt. - * @arg DMA1_IT_GL6: DMA1 Channel6 global interrupt. - * @arg DMA1_IT_TC6: DMA1 Channel6 transfer complete interrupt. - * @arg DMA1_IT_HT6: DMA1 Channel6 half transfer interrupt. - * @arg DMA1_IT_TE6: DMA1 Channel6 transfer error interrupt. - * @arg DMA1_IT_GL7: DMA1 Channel7 global interrupt. - * @arg DMA1_IT_TC7: DMA1 Channel7 transfer complete interrupt. - * @arg DMA1_IT_HT7: DMA1 Channel7 half transfer interrupt. - * @arg DMA1_IT_TE7: DMA1 Channel7 transfer error interrupt. - * @arg DMA2_IT_GL1: DMA2 Channel1 global interrupt. - * @arg DMA2_IT_TC1: DMA2 Channel1 transfer complete interrupt. - * @arg DMA2_IT_HT1: DMA2 Channel1 half transfer interrupt. - * @arg DMA2_IT_TE1: DMA2 Channel1 transfer error interrupt. - * @arg DMA2_IT_GL2: DMA2 Channel2 global interrupt. - * @arg DMA2_IT_TC2: DMA2 Channel2 transfer complete interrupt. - * @arg DMA2_IT_HT2: DMA2 Channel2 half transfer interrupt. - * @arg DMA2_IT_TE2: DMA2 Channel2 transfer error interrupt. - * @arg DMA2_IT_GL3: DMA2 Channel3 global interrupt. - * @arg DMA2_IT_TC3: DMA2 Channel3 transfer complete interrupt. - * @arg DMA2_IT_HT3: DMA2 Channel3 half transfer interrupt. - * @arg DMA2_IT_TE3: DMA2 Channel3 transfer error interrupt. - * @arg DMA2_IT_GL4: DMA2 Channel4 global interrupt. - * @arg DMA2_IT_TC4: DMA2 Channel4 transfer complete interrupt. - * @arg DMA2_IT_HT4: DMA2 Channel4 half transfer interrupt. - * @arg DMA2_IT_TE4: DMA2 Channel4 transfer error interrupt. - * @arg DMA2_IT_GL5: DMA2 Channel5 global interrupt. - * @arg DMA2_IT_TC5: DMA2 Channel5 transfer complete interrupt. - * @arg DMA2_IT_HT5: DMA2 Channel5 half transfer interrupt. - * @arg DMA2_IT_TE5: DMA2 Channel5 transfer error interrupt. - * @retval None - */ -void DMA_ClearITPendingBit(uint32_t DMA_IT) -{ - /* Check the parameters */ - assert_param(IS_DMA_CLEAR_IT(DMA_IT)); - - /* Calculate the used DMA */ - if ((DMA_IT & FLAG_Mask) != (uint32_t)RESET) - { - /* Clear the selected DMA interrupt pending bits */ - DMA2->IFCR = DMA_IT; - } - else - { - /* Clear the selected DMA interrupt pending bits */ - DMA1->IFCR = DMA_IT; - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c deleted file mode 100644 index cc4ab9965..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_exti.c +++ /dev/null @@ -1,268 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_exti.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the EXTI firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_exti.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup EXTI - * @brief EXTI driver modules - * @{ - */ - -/** @defgroup EXTI_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Defines - * @{ - */ - -#define EXTI_LineNone ((uint32_t)0x00000) /* No interrupt selected */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup EXTI_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the EXTI peripheral registers to their default reset values. - * @param None - * @retval None - */ -void EXTI_DeInit(void) -{ - EXTI->IMR = 0x00000000; - EXTI->EMR = 0x00000000; - EXTI->RTSR = 0x00000000; - EXTI->FTSR = 0x00000000; - EXTI->PR = 0x000FFFFF; -} - -/** - * @brief Initializes the EXTI peripheral according to the specified - * parameters in the EXTI_InitStruct. - * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure - * that contains the configuration information for the EXTI peripheral. - * @retval None - */ -void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct) -{ - uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_EXTI_MODE(EXTI_InitStruct->EXTI_Mode)); - assert_param(IS_EXTI_TRIGGER(EXTI_InitStruct->EXTI_Trigger)); - assert_param(IS_EXTI_LINE(EXTI_InitStruct->EXTI_Line)); - assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->EXTI_LineCmd)); - - tmp = (uint32_t)EXTI_BASE; - - if (EXTI_InitStruct->EXTI_LineCmd != DISABLE) - { - /* Clear EXTI line configuration */ - EXTI->IMR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->EMR &= ~EXTI_InitStruct->EXTI_Line; - - tmp += EXTI_InitStruct->EXTI_Mode; - - *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; - - /* Clear Rising Falling edge configuration */ - EXTI->RTSR &= ~EXTI_InitStruct->EXTI_Line; - EXTI->FTSR &= ~EXTI_InitStruct->EXTI_Line; - - /* Select the trigger for the selected external interrupts */ - if (EXTI_InitStruct->EXTI_Trigger == EXTI_Trigger_Rising_Falling) - { - /* Rising Falling edge */ - EXTI->RTSR |= EXTI_InitStruct->EXTI_Line; - EXTI->FTSR |= EXTI_InitStruct->EXTI_Line; - } - else - { - tmp = (uint32_t)EXTI_BASE; - tmp += EXTI_InitStruct->EXTI_Trigger; - - *(__IO uint32_t *) tmp |= EXTI_InitStruct->EXTI_Line; - } - } - else - { - tmp += EXTI_InitStruct->EXTI_Mode; - - /* Disable the selected external lines */ - *(__IO uint32_t *) tmp &= ~EXTI_InitStruct->EXTI_Line; - } -} - -/** - * @brief Fills each EXTI_InitStruct member with its reset value. - * @param EXTI_InitStruct: pointer to a EXTI_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct) -{ - EXTI_InitStruct->EXTI_Line = EXTI_LineNone; - EXTI_InitStruct->EXTI_Mode = EXTI_Mode_Interrupt; - EXTI_InitStruct->EXTI_Trigger = EXTI_Trigger_Falling; - EXTI_InitStruct->EXTI_LineCmd = DISABLE; -} - -/** - * @brief Generates a Software interrupt. - * @param EXTI_Line: specifies the EXTI lines to be enabled or disabled. - * This parameter can be any combination of EXTI_Linex where x can be (0..19). - * @retval None - */ -void EXTI_GenerateSWInterrupt(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->SWIER |= EXTI_Line; -} - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param EXTI_Line: specifies the EXTI line flag to check. - * This parameter can be: - * @arg EXTI_Linex: External interrupt line x where x(0..19) - * @retval The new state of EXTI_Line (SET or RESET). - */ -FlagStatus EXTI_GetFlagStatus(uint32_t EXTI_Line) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - if ((EXTI->PR & EXTI_Line) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the EXTI’s line pending flags. - * @param EXTI_Line: specifies the EXTI lines flags to clear. - * This parameter can be any combination of EXTI_Linex where x can be (0..19). - * @retval None - */ -void EXTI_ClearFlag(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param EXTI_Line: specifies the EXTI line to check. - * This parameter can be: - * @arg EXTI_Linex: External interrupt line x where x(0..19) - * @retval The new state of EXTI_Line (SET or RESET). - */ -ITStatus EXTI_GetITStatus(uint32_t EXTI_Line) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - /* Check the parameters */ - assert_param(IS_GET_EXTI_LINE(EXTI_Line)); - - enablestatus = EXTI->IMR & EXTI_Line; - if (((EXTI->PR & EXTI_Line) != (uint32_t)RESET) && (enablestatus != (uint32_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the EXTI’s line pending bits. - * @param EXTI_Line: specifies the EXTI lines to clear. - * This parameter can be any combination of EXTI_Linex where x can be (0..19). - * @retval None - */ -void EXTI_ClearITPendingBit(uint32_t EXTI_Line) -{ - /* Check the parameters */ - assert_param(IS_EXTI_LINE(EXTI_Line)); - - EXTI->PR = EXTI_Line; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c deleted file mode 100644 index 22ee18000..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_flash.c +++ /dev/null @@ -1,874 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_flash.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the FLASH firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_flash.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup FLASH - * @brief FLASH driver modules - * @{ - */ - -/** @defgroup FLASH_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_Defines - * @{ - */ - -/* Flash Access Control Register bits */ -#define ACR_LATENCY_Mask ((uint32_t)0x00000038) -#define ACR_HLFCYA_Mask ((uint32_t)0xFFFFFFF7) -#define ACR_PRFTBE_Mask ((uint32_t)0xFFFFFFEF) - -/* Flash Access Control Register bits */ -#define ACR_PRFTBS_Mask ((uint32_t)0x00000020) - -/* Flash Control Register bits */ -#define CR_PG_Set ((uint32_t)0x00000001) -#define CR_PG_Reset ((uint32_t)0x00001FFE) -#define CR_PER_Set ((uint32_t)0x00000002) -#define CR_PER_Reset ((uint32_t)0x00001FFD) -#define CR_MER_Set ((uint32_t)0x00000004) -#define CR_MER_Reset ((uint32_t)0x00001FFB) -#define CR_OPTPG_Set ((uint32_t)0x00000010) -#define CR_OPTPG_Reset ((uint32_t)0x00001FEF) -#define CR_OPTER_Set ((uint32_t)0x00000020) -#define CR_OPTER_Reset ((uint32_t)0x00001FDF) -#define CR_STRT_Set ((uint32_t)0x00000040) -#define CR_LOCK_Set ((uint32_t)0x00000080) - -/* FLASH Mask */ -#define RDPRT_Mask ((uint32_t)0x00000002) -#define WRP0_Mask ((uint32_t)0x000000FF) -#define WRP1_Mask ((uint32_t)0x0000FF00) -#define WRP2_Mask ((uint32_t)0x00FF0000) -#define WRP3_Mask ((uint32_t)0xFF000000) - -/* FLASH Keys */ -#define RDP_Key ((uint16_t)0x00A5) -#define FLASH_KEY1 ((uint32_t)0x45670123) -#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) - -/* Delay definition */ -#define EraseTimeout ((uint32_t)0x00000FFF) -#define ProgramTimeout ((uint32_t)0x0000000F) - -/** - * @} - */ - -/** @defgroup FLASH_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup FLASH_Private_FunctionPrototypes - * @{ - */ - -static void delay(void); -/** - * @} - */ - -/** @defgroup FLASH_Private_Functions - * @{ - */ - -/** - * @brief Sets the code latency value. - * @param FLASH_Latency: specifies the FLASH Latency value. - * This parameter can be one of the following values: - * @arg FLASH_Latency_0: FLASH Zero Latency cycle - * @arg FLASH_Latency_1: FLASH One Latency cycle - * @arg FLASH_Latency_2: FLASH Two Latency cycles - * @retval None - */ -void FLASH_SetLatency(uint32_t FLASH_Latency) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_LATENCY(FLASH_Latency)); - - /* Read the ACR register */ - tmpreg = FLASH->ACR; - - /* Sets the Latency value */ - tmpreg &= ACR_LATENCY_Mask; - tmpreg |= FLASH_Latency; - - /* Write the ACR register */ - FLASH->ACR = tmpreg; -} - -/** - * @brief Enables or disables the Half cycle flash access. - * @param FLASH_HalfCycleAccess: specifies the FLASH Half cycle Access mode. - * This parameter can be one of the following values: - * @arg FLASH_HalfCycleAccess_Enable: FLASH Half Cycle Enable - * @arg FLASH_HalfCycleAccess_Disable: FLASH Half Cycle Disable - * @retval None - */ -void FLASH_HalfCycleAccessCmd(uint32_t FLASH_HalfCycleAccess) -{ - /* Check the parameters */ - assert_param(IS_FLASH_HALFCYCLEACCESS_STATE(FLASH_HalfCycleAccess)); - - /* Enable or disable the Half cycle access */ - FLASH->ACR &= ACR_HLFCYA_Mask; - FLASH->ACR |= FLASH_HalfCycleAccess; -} - -/** - * @brief Enables or disables the Prefetch Buffer. - * @param FLASH_PrefetchBuffer: specifies the Prefetch buffer status. - * This parameter can be one of the following values: - * @arg FLASH_PrefetchBuffer_Enable: FLASH Prefetch Buffer Enable - * @arg FLASH_PrefetchBuffer_Disable: FLASH Prefetch Buffer Disable - * @retval None - */ -void FLASH_PrefetchBufferCmd(uint32_t FLASH_PrefetchBuffer) -{ - /* Check the parameters */ - assert_param(IS_FLASH_PREFETCHBUFFER_STATE(FLASH_PrefetchBuffer)); - - /* Enable or disable the Prefetch Buffer */ - FLASH->ACR &= ACR_PRFTBE_Mask; - FLASH->ACR |= FLASH_PrefetchBuffer; -} - -/** - * @brief Unlocks the FLASH Program Erase Controller. - * @param None - * @retval None - */ -void FLASH_Unlock(void) -{ - /* Authorize the FPEC Access */ - FLASH->KEYR = FLASH_KEY1; - FLASH->KEYR = FLASH_KEY2; -} - -/** - * @brief Locks the FLASH Program Erase Controller. - * @param None - * @retval None - */ -void FLASH_Lock(void) -{ - /* Set the Lock Bit to lock the FPEC and the FCR */ - FLASH->CR |= CR_LOCK_Set; -} - -/** - * @brief Erases a specified FLASH page. - * @param Page_Address: The page address to be erased. - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ErasePage(uint32_t Page_Address) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Page_Address)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase the page */ - FLASH->CR|= CR_PER_Set; - FLASH->AR = Page_Address; - FLASH->CR|= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the erase operation is completed, disable the PER Bit */ - FLASH->CR &= CR_PER_Reset; - } - } - /* Return the Erase Status */ - return status; -} - -/** - * @brief Erases all FLASH pages. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EraseAllPages(void) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to erase all pages */ - FLASH->CR |= CR_MER_Set; - FLASH->CR |= CR_STRT_Set; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the erase operation is completed, disable the MER Bit */ - FLASH->CR &= CR_MER_Reset; - } - } - /* Return the Erase Status */ - return status; -} - -/** - * @brief Erases the FLASH option bytes. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EraseOptionBytes(void) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* if the previous operation is completed, proceed to erase the option bytes */ - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - /* Enable the readout access */ - OB->RDP= RDP_Key; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if (status != FLASH_TIMEOUT) - { - /* Disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - } - /* Return the erase status */ - return status; -} - -/** - * @brief Programs a word at a specified address. - * @param Address: specifies the address to be programmed. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new first - half word */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = (uint16_t)Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new second - half word */ - tmp = Address + 2; - - *(__IO uint16_t*) tmp = Data >> 16; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status != FLASH_TIMEOUT) - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - else - { - if (status != FLASH_TIMEOUT) - { - /* Disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - } - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a half word at a specified address. - * @param Address: specifies the address to be programmed. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_FLASH_ADDRESS(Address)); - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* if the previous operation is completed, proceed to program the new data */ - FLASH->CR |= CR_PG_Set; - - *(__IO uint16_t*)Address = Data; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the PG Bit */ - FLASH->CR &= CR_PG_Reset; - } - } - /* Return the Program Status */ - return status; -} - -/** - * @brief Programs a half word at a specified Option Byte Data address. - * @param Address: specifies the address to be programmed. - * This parameter can be 0x1FFFF804 or 0x1FFFF806. - * @param Data: specifies the data to be programmed. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_OB_DATA_ADDRESS(Address)); - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status == FLASH_COMPLETE) - { - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - /* Enables the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - *(__IO uint16_t*)Address = Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte Data Program Status */ - return status; -} - -/** - * @brief Write protects the desired pages - * @param FLASH_Pages: specifies the address of the pages to be write protected. - * This parameter can be: - * @arg For @b STM32_Low-density_devices: value between FLASH_WRProt_Pages0to3 and FLASH_WRProt_Pages28to31 - * @arg For @b STM32_Medium-density_devices: value between FLASH_WRProt_Pages0to3 - * and FLASH_WRProt_Pages124to127 - * @arg For @b STM32_High-density_devices: value between FLASH_WRProt_Pages0to1 and - * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to255 - * @arg For @b STM32_Connectivity_line_devices: value between FLASH_WRProt_Pages0to1 and - * FLASH_WRProt_Pages60to61 or FLASH_WRProt_Pages62to127 - * @arg FLASH_WRProt_AllPages - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages) -{ - uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF, WRP2_Data = 0xFFFF, WRP3_Data = 0xFFFF; - - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_FLASH_WRPROT_PAGE(FLASH_Pages)); - - FLASH_Pages = (uint32_t)(~FLASH_Pages); - WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask); - WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8); - WRP2_Data = (uint16_t)((FLASH_Pages & WRP2_Mask) >> 16); - WRP3_Data = (uint16_t)((FLASH_Pages & WRP3_Mask) >> 24); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - FLASH->CR |= CR_OPTPG_Set; - if(WRP0_Data != 0xFF) - { - OB->WRP0 = WRP0_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF)) - { - OB->WRP1 = WRP1_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - if((status == FLASH_COMPLETE) && (WRP2_Data != 0xFF)) - { - OB->WRP2 = WRP2_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if((status == FLASH_COMPLETE)&& (WRP3_Data != 0xFF)) - { - OB->WRP3 = WRP3_Data; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - } - - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the write protection operation Status */ - return status; -} - -/** - * @brief Enables or disables the read out protection. - * @note If the user has already programmed the other option bytes before calling - * this function, he must re-program them since this function erases all option bytes. - * @param Newstate: new state of the ReadOut Protection. - * This parameter can be: ENABLE or DISABLE. - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState) -{ - FLASH_Status status = FLASH_COMPLETE; - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* Authorizes the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - FLASH->CR |= CR_OPTER_Set; - FLASH->CR |= CR_STRT_Set; - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - if(status == FLASH_COMPLETE) - { - /* if the erase operation is completed, disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - if(NewState != DISABLE) - { - OB->RDP = 0x00; - } - else - { - OB->RDP = RDP_Key; - } - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(EraseTimeout); - - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - else - { - if(status != FLASH_TIMEOUT) - { - /* Disable the OPTER Bit */ - FLASH->CR &= CR_OPTER_Reset; - } - } - } - /* Return the protection operation Status */ - return status; -} - -/** - * @brief Programs the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. - * @param OB_IWDG: Selects the IWDG mode - * This parameter can be one of the following values: - * @arg OB_IWDG_SW: Software IWDG selected - * @arg OB_IWDG_HW: Hardware IWDG selected - * @param OB_STOP: Reset event when entering STOP mode. - * This parameter can be one of the following values: - * @arg OB_STOP_NoRST: No reset generated when entering in STOP - * @arg OB_STOP_RST: Reset generated when entering in STOP - * @param OB_STDBY: Reset event when entering Standby mode. - * This parameter can be one of the following values: - * @arg OB_STDBY_NoRST: No reset generated when entering in STANDBY - * @arg OB_STDBY_RST: Reset generated when entering in STANDBY - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check the parameters */ - assert_param(IS_OB_IWDG_SOURCE(OB_IWDG)); - assert_param(IS_OB_STOP_SOURCE(OB_STOP)); - assert_param(IS_OB_STDBY_SOURCE(OB_STDBY)); - - /* Authorize the small information block programming */ - FLASH->OPTKEYR = FLASH_KEY1; - FLASH->OPTKEYR = FLASH_KEY2; - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - - if(status == FLASH_COMPLETE) - { - /* Enable the Option Bytes Programming operation */ - FLASH->CR |= CR_OPTPG_Set; - - OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | ((uint16_t)0xF8))); - - /* Wait for last operation to be completed */ - status = FLASH_WaitForLastOperation(ProgramTimeout); - if(status != FLASH_TIMEOUT) - { - /* if the program operation is completed, disable the OPTPG Bit */ - FLASH->CR &= CR_OPTPG_Reset; - } - } - /* Return the Option Byte program Status */ - return status; -} - -/** - * @brief Returns the FLASH User Option Bytes values. - * @param None - * @retval The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1) - * and RST_STDBY(Bit2). - */ -uint32_t FLASH_GetUserOptionByte(void) -{ - /* Return the User Option Byte */ - return (uint32_t)(FLASH->OBR >> 2); -} - -/** - * @brief Returns the FLASH Write Protection Option Bytes Register value. - * @param None - * @retval The FLASH Write Protection Option Bytes Register value - */ -uint32_t FLASH_GetWriteProtectionOptionByte(void) -{ - /* Return the Falsh write protection Register value */ - return (uint32_t)(FLASH->WRPR); -} - -/** - * @brief Checks whether the FLASH Read Out Protection Status is set or not. - * @param None - * @retval FLASH ReadOut Protection Status(SET or RESET) - */ -FlagStatus FLASH_GetReadOutProtectionStatus(void) -{ - FlagStatus readoutstatus = RESET; - if ((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET) - { - readoutstatus = SET; - } - else - { - readoutstatus = RESET; - } - return readoutstatus; -} - -/** - * @brief Checks whether the FLASH Prefetch Buffer status is set or not. - * @param None - * @retval FLASH Prefetch Buffer Status (SET or RESET). - */ -FlagStatus FLASH_GetPrefetchBufferStatus(void) -{ - FlagStatus bitstatus = RESET; - - if ((FLASH->ACR & ACR_PRFTBS_Mask) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the new state of FLASH Prefetch Buffer Status (SET or RESET) */ - return bitstatus; -} - -/** - * @brief Enables or disables the specified FLASH interrupts. - * @param FLASH_IT: specifies the FLASH interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg FLASH_IT_ERROR: FLASH Error Interrupt - * @arg FLASH_IT_EOP: FLASH end of operation Interrupt - * @param NewState: new state of the specified Flash interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FLASH_ITConfig(uint16_t FLASH_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FLASH_IT(FLASH_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if(NewState != DISABLE) - { - /* Enable the interrupt sources */ - FLASH->CR |= FLASH_IT; - } - else - { - /* Disable the interrupt sources */ - FLASH->CR &= ~(uint32_t)FLASH_IT; - } -} - -/** - * @brief Checks whether the specified FLASH flag is set or not. - * @param FLASH_FLAG: specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg FLASH_FLAG_BSY: FLASH Busy flag - * @arg FLASH_FLAG_PGERR: FLASH Program error flag - * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @arg FLASH_FLAG_OPTERR: FLASH Option Byte error flag - * @retval The new state of FLASH_FLAG (SET or RESET). - */ -FlagStatus FLASH_GetFlagStatus(uint16_t FLASH_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_FLASH_GET_FLAG(FLASH_FLAG)) ; - if(FLASH_FLAG == FLASH_FLAG_OPTERR) - { - if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - else - { - if((FLASH->SR & FLASH_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - } - /* Return the new state of FLASH_FLAG (SET or RESET) */ - return bitstatus; -} - -/** - * @brief Clears the FLASH’s pending flags. - * @param FLASH_FLAG: specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_PGERR: FLASH Program error flag - * @arg FLASH_FLAG_WRPRTERR: FLASH Write protected error flag - * @arg FLASH_FLAG_EOP: FLASH End of Operation flag - * @retval None - */ -void FLASH_ClearFlag(uint16_t FLASH_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FLASH_CLEAR_FLAG(FLASH_FLAG)) ; - - /* Clear the flags */ - FLASH->SR = FLASH_FLAG; -} - -/** - * @brief Returns the FLASH Status. - * @param None - * @retval FLASH Status: The returned value can be: FLASH_BUSY, FLASH_ERROR_PG, - * FLASH_ERROR_WRP or FLASH_COMPLETE - */ -FLASH_Status FLASH_GetStatus(void) -{ - FLASH_Status flashstatus = FLASH_COMPLETE; - - if((FLASH->SR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY) - { - flashstatus = FLASH_BUSY; - } - else - { - if((FLASH->SR & FLASH_FLAG_PGERR) != 0) - { - flashstatus = FLASH_ERROR_PG; - } - else - { - if((FLASH->SR & FLASH_FLAG_WRPRTERR) != 0 ) - { - flashstatus = FLASH_ERROR_WRP; - } - else - { - flashstatus = FLASH_COMPLETE; - } - } - } - /* Return the Flash Status */ - return flashstatus; -} - -/** - * @brief Waits for a Flash operation to complete or a TIMEOUT to occur. - * @param Timeout: FLASH progamming Timeout - * @retval FLASH Status: The returned value can be: FLASH_ERROR_PG, - * FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT. - */ -FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout) -{ - FLASH_Status status = FLASH_COMPLETE; - - /* Check for the Flash Status */ - status = FLASH_GetStatus(); - /* Wait for a Flash operation to complete or a TIMEOUT to occur */ - while((status == FLASH_BUSY) && (Timeout != 0x00)) - { - delay(); - status = FLASH_GetStatus(); - Timeout--; - } - if(Timeout == 0x00 ) - { - status = FLASH_TIMEOUT; - } - /* Return the operation status */ - return status; -} - -/** - * @brief Inserts a time delay. - * @param None - * @retval None - */ -static void delay(void) -{ - __IO uint32_t i = 0; - for(i = 0xFF; i != 0; i--) - { - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c deleted file mode 100644 index 32ebf402e..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_fsmc.c +++ /dev/null @@ -1,858 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_fsmc.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the FSMC firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_fsmc.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup FSMC - * @brief FSMC driver modules - * @{ - */ - -/** @defgroup FSMC_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - -/** @defgroup FSMC_Private_Defines - * @{ - */ - -/* --------------------- FSMC registers bit mask ---------------------------- */ - -/* FSMC BCRx Mask */ -#define BCR_MBKEN_Set ((uint32_t)0x00000001) -#define BCR_MBKEN_Reset ((uint32_t)0x000FFFFE) -#define BCR_FACCEN_Set ((uint32_t)0x00000040) - -/* FSMC PCRx Mask */ -#define PCR_PBKEN_Set ((uint32_t)0x00000004) -#define PCR_PBKEN_Reset ((uint32_t)0x000FFFFB) -#define PCR_ECCEN_Set ((uint32_t)0x00000040) -#define PCR_ECCEN_Reset ((uint32_t)0x000FFFBF) -#define PCR_MemoryType_NAND ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup FSMC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup FSMC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup FSMC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup FSMC_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the FSMC NOR/SRAM Banks registers to their default - * reset values. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 - * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 - * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 - * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 - * @retval None - */ -void FSMC_NORSRAMDeInit(uint32_t FSMC_Bank) -{ - /* Check the parameter */ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); - - /* FSMC_Bank1_NORSRAM1 */ - if(FSMC_Bank == FSMC_Bank1_NORSRAM1) - { - FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030DB; - } - /* FSMC_Bank1_NORSRAM2, FSMC_Bank1_NORSRAM3 or FSMC_Bank1_NORSRAM4 */ - else - { - FSMC_Bank1->BTCR[FSMC_Bank] = 0x000030D2; - } - FSMC_Bank1->BTCR[FSMC_Bank + 1] = 0x0FFFFFFF; - FSMC_Bank1E->BWTR[FSMC_Bank] = 0x0FFFFFFF; -} - -/** - * @brief Deinitializes the FSMC NAND Banks registers to their default reset values. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @retval None - */ -void FSMC_NANDDeInit(uint32_t FSMC_Bank) -{ - /* Check the parameter */ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - /* Set the FSMC_Bank2 registers to their reset values */ - FSMC_Bank2->PCR2 = 0x00000018; - FSMC_Bank2->SR2 = 0x00000040; - FSMC_Bank2->PMEM2 = 0xFCFCFCFC; - FSMC_Bank2->PATT2 = 0xFCFCFCFC; - } - /* FSMC_Bank3_NAND */ - else - { - /* Set the FSMC_Bank3 registers to their reset values */ - FSMC_Bank3->PCR3 = 0x00000018; - FSMC_Bank3->SR3 = 0x00000040; - FSMC_Bank3->PMEM3 = 0xFCFCFCFC; - FSMC_Bank3->PATT3 = 0xFCFCFCFC; - } -} - -/** - * @brief Deinitializes the FSMC PCCARD Bank registers to their default reset values. - * @param None - * @retval None - */ -void FSMC_PCCARDDeInit(void) -{ - /* Set the FSMC_Bank4 registers to their reset values */ - FSMC_Bank4->PCR4 = 0x00000018; - FSMC_Bank4->SR4 = 0x00000000; - FSMC_Bank4->PMEM4 = 0xFCFCFCFC; - FSMC_Bank4->PATT4 = 0xFCFCFCFC; - FSMC_Bank4->PIO4 = 0xFCFCFCFC; -} - -/** - * @brief Initializes the FSMC NOR/SRAM Banks according to the specified - * parameters in the FSMC_NORSRAMInitStruct. - * @param FSMC_NORSRAMInitStruct : pointer to a FSMC_NORSRAMInitTypeDef - * structure that contains the configuration information for - * the FSMC NOR/SRAM specified Banks. - * @retval None - */ -void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) -{ - /* Check the parameters */ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_NORSRAMInitStruct->FSMC_Bank)); - assert_param(IS_FSMC_MUX(FSMC_NORSRAMInitStruct->FSMC_DataAddressMux)); - assert_param(IS_FSMC_MEMORY(FSMC_NORSRAMInitStruct->FSMC_MemoryType)); - assert_param(IS_FSMC_MEMORY_WIDTH(FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth)); - assert_param(IS_FSMC_BURSTMODE(FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode)); - assert_param(IS_FSMC_WAIT_POLARITY(FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity)); - assert_param(IS_FSMC_WRAP_MODE(FSMC_NORSRAMInitStruct->FSMC_WrapMode)); - assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive)); - assert_param(IS_FSMC_WRITE_OPERATION(FSMC_NORSRAMInitStruct->FSMC_WriteOperation)); - assert_param(IS_FSMC_WAITE_SIGNAL(FSMC_NORSRAMInitStruct->FSMC_WaitSignal)); - assert_param(IS_FSMC_EXTENDED_MODE(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode)); - assert_param(IS_FSMC_WRITE_BURST(FSMC_NORSRAMInitStruct->FSMC_WriteBurst)); - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime)); - assert_param(IS_FSMC_TURNAROUND_TIME(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration)); - assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode)); - - /* Bank1 NOR/SRAM control register configuration */ - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] = - (uint32_t)FSMC_NORSRAMInitStruct->FSMC_DataAddressMux | - FSMC_NORSRAMInitStruct->FSMC_MemoryType | - FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth | - FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode | - FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity | - FSMC_NORSRAMInitStruct->FSMC_WrapMode | - FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive | - FSMC_NORSRAMInitStruct->FSMC_WriteOperation | - FSMC_NORSRAMInitStruct->FSMC_WaitSignal | - FSMC_NORSRAMInitStruct->FSMC_ExtendedMode | - FSMC_NORSRAMInitStruct->FSMC_WriteBurst; - if(FSMC_NORSRAMInitStruct->FSMC_MemoryType == FSMC_MemoryType_NOR) - { - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank] |= (uint32_t)BCR_FACCEN_Set; - } - /* Bank1 NOR/SRAM timing register configuration */ - FSMC_Bank1->BTCR[FSMC_NORSRAMInitStruct->FSMC_Bank+1] = - (uint32_t)FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime << 4) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime << 8) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration << 16) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision << 20) | - (FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency << 24) | - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode; - - - /* Bank1 NOR/SRAM timing register for write configuration, if extended mode is used */ - if(FSMC_NORSRAMInitStruct->FSMC_ExtendedMode == FSMC_ExtendedMode_Enable) - { - assert_param(IS_FSMC_ADDRESS_SETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime)); - assert_param(IS_FSMC_ADDRESS_HOLD_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime)); - assert_param(IS_FSMC_DATASETUP_TIME(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime)); - assert_param(IS_FSMC_CLK_DIV(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision)); - assert_param(IS_FSMC_DATA_LATENCY(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency)); - assert_param(IS_FSMC_ACCESS_MODE(FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode)); - FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = - (uint32_t)FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime << 4 )| - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime << 8) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision << 20) | - (FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency << 24) | - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode; - } - else - { - FSMC_Bank1E->BWTR[FSMC_NORSRAMInitStruct->FSMC_Bank] = 0x0FFFFFFF; - } -} - -/** - * @brief Initializes the FSMC NAND Banks according to the specified - * parameters in the FSMC_NANDInitStruct. - * @param FSMC_NANDInitStruct : pointer to a FSMC_NANDInitTypeDef - * structure that contains the configuration information for the FSMC NAND specified Banks. - * @retval None - */ -void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) -{ - uint32_t tmppcr = 0x00000000, tmppmem = 0x00000000, tmppatt = 0x00000000; - - /* Check the parameters */ - assert_param( IS_FSMC_NAND_BANK(FSMC_NANDInitStruct->FSMC_Bank)); - assert_param( IS_FSMC_WAIT_FEATURE(FSMC_NANDInitStruct->FSMC_Waitfeature)); - assert_param( IS_FSMC_MEMORY_WIDTH(FSMC_NANDInitStruct->FSMC_MemoryDataWidth)); - assert_param( IS_FSMC_ECC_STATE(FSMC_NANDInitStruct->FSMC_ECC)); - assert_param( IS_FSMC_ECCPAGE_SIZE(FSMC_NANDInitStruct->FSMC_ECCPageSize)); - assert_param( IS_FSMC_TCLR_TIME(FSMC_NANDInitStruct->FSMC_TCLRSetupTime)); - assert_param( IS_FSMC_TAR_TIME(FSMC_NANDInitStruct->FSMC_TARSetupTime)); - assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); - assert_param(IS_FSMC_SETUP_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); - - /* Set the tmppcr value according to FSMC_NANDInitStruct parameters */ - tmppcr = (uint32_t)FSMC_NANDInitStruct->FSMC_Waitfeature | - PCR_MemoryType_NAND | - FSMC_NANDInitStruct->FSMC_MemoryDataWidth | - FSMC_NANDInitStruct->FSMC_ECC | - FSMC_NANDInitStruct->FSMC_ECCPageSize | - (FSMC_NANDInitStruct->FSMC_TCLRSetupTime << 9 )| - (FSMC_NANDInitStruct->FSMC_TARSetupTime << 13); - - /* Set tmppmem value according to FSMC_CommonSpaceTimingStructure parameters */ - tmppmem = (uint32_t)FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set tmppatt value according to FSMC_AttributeSpaceTimingStructure parameters */ - tmppatt = (uint32_t)FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - if(FSMC_NANDInitStruct->FSMC_Bank == FSMC_Bank2_NAND) - { - /* FSMC_Bank2_NAND registers configuration */ - FSMC_Bank2->PCR2 = tmppcr; - FSMC_Bank2->PMEM2 = tmppmem; - FSMC_Bank2->PATT2 = tmppatt; - } - else - { - /* FSMC_Bank3_NAND registers configuration */ - FSMC_Bank3->PCR3 = tmppcr; - FSMC_Bank3->PMEM3 = tmppmem; - FSMC_Bank3->PATT3 = tmppatt; - } -} - -/** - * @brief Initializes the FSMC PCCARD Bank according to the specified - * parameters in the FSMC_PCCARDInitStruct. - * @param FSMC_PCCARDInitStruct : pointer to a FSMC_PCCARDInitTypeDef - * structure that contains the configuration information for the FSMC PCCARD Bank. - * @retval None - */ -void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) -{ - /* Check the parameters */ - assert_param(IS_FSMC_WAIT_FEATURE(FSMC_PCCARDInitStruct->FSMC_Waitfeature)); - assert_param(IS_FSMC_TCLR_TIME(FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime)); - assert_param(IS_FSMC_TAR_TIME(FSMC_PCCARDInitStruct->FSMC_TARSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime)); - - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime)); - assert_param(IS_FSMC_SETUP_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime)); - assert_param(IS_FSMC_WAIT_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime)); - assert_param(IS_FSMC_HOLD_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime)); - assert_param(IS_FSMC_HIZ_TIME(FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime)); - - /* Set the PCR4 register value according to FSMC_PCCARDInitStruct parameters */ - FSMC_Bank4->PCR4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_Waitfeature | - FSMC_MemoryDataWidth_16b | - (FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime << 9) | - (FSMC_PCCARDInitStruct->FSMC_TARSetupTime << 13); - - /* Set PMEM4 register value according to FSMC_CommonSpaceTimingStructure parameters */ - FSMC_Bank4->PMEM4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set PATT4 register value according to FSMC_AttributeSpaceTimingStructure parameters */ - FSMC_Bank4->PATT4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime << 24); - - /* Set PIO4 register value according to FSMC_IOSpaceTimingStructure parameters */ - FSMC_Bank4->PIO4 = (uint32_t)FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime | - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime << 8) | - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime << 16)| - (FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime << 24); -} - -/** - * @brief Fills each FSMC_NORSRAMInitStruct member with its default value. - * @param FSMC_NORSRAMInitStruct: pointer to a FSMC_NORSRAMInitTypeDef - * structure which will be initialized. - * @retval None - */ -void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct) -{ - /* Reset NOR/SRAM Init structure parameters values */ - FSMC_NORSRAMInitStruct->FSMC_Bank = FSMC_Bank1_NORSRAM1; - FSMC_NORSRAMInitStruct->FSMC_DataAddressMux = FSMC_DataAddressMux_Enable; - FSMC_NORSRAMInitStruct->FSMC_MemoryType = FSMC_MemoryType_SRAM; - FSMC_NORSRAMInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; - FSMC_NORSRAMInitStruct->FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low; - FSMC_NORSRAMInitStruct->FSMC_WrapMode = FSMC_WrapMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState; - FSMC_NORSRAMInitStruct->FSMC_WriteOperation = FSMC_WriteOperation_Enable; - FSMC_NORSRAMInitStruct->FSMC_WaitSignal = FSMC_WaitSignal_Enable; - FSMC_NORSRAMInitStruct->FSMC_ExtendedMode = FSMC_ExtendedMode_Disable; - FSMC_NORSRAMInitStruct->FSMC_WriteBurst = FSMC_WriteBurst_Disable; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressSetupTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AddressHoldTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataSetupTime = 0xFF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_CLKDivision = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_DataLatency = 0xF; - FSMC_NORSRAMInitStruct->FSMC_ReadWriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressSetupTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AddressHoldTime = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataSetupTime = 0xFF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_BusTurnAroundDuration = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_CLKDivision = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_DataLatency = 0xF; - FSMC_NORSRAMInitStruct->FSMC_WriteTimingStruct->FSMC_AccessMode = FSMC_AccessMode_A; -} - -/** - * @brief Fills each FSMC_NANDInitStruct member with its default value. - * @param FSMC_NANDInitStruct: pointer to a FSMC_NANDInitTypeDef - * structure which will be initialized. - * @retval None - */ -void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct) -{ - /* Reset NAND Init structure parameters values */ - FSMC_NANDInitStruct->FSMC_Bank = FSMC_Bank2_NAND; - FSMC_NANDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; - FSMC_NANDInitStruct->FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b; - FSMC_NANDInitStruct->FSMC_ECC = FSMC_ECC_Disable; - FSMC_NANDInitStruct->FSMC_ECCPageSize = FSMC_ECCPageSize_256Bytes; - FSMC_NANDInitStruct->FSMC_TCLRSetupTime = 0x0; - FSMC_NANDInitStruct->FSMC_TARSetupTime = 0x0; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_NANDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; -} - -/** - * @brief Fills each FSMC_PCCARDInitStruct member with its default value. - * @param FSMC_PCCARDInitStruct: pointer to a FSMC_PCCARDInitTypeDef - * structure which will be initialized. - * @retval None - */ -void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct) -{ - /* Reset PCCARD Init structure parameters values */ - FSMC_PCCARDInitStruct->FSMC_Waitfeature = FSMC_Waitfeature_Disable; - FSMC_PCCARDInitStruct->FSMC_TCLRSetupTime = 0x0; - FSMC_PCCARDInitStruct->FSMC_TARSetupTime = 0x0; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_CommonSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_AttributeSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_SetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_WaitSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HoldSetupTime = 0xFC; - FSMC_PCCARDInitStruct->FSMC_IOSpaceTimingStruct->FSMC_HiZSetupTime = 0xFC; -} - -/** - * @brief Enables or disables the specified NOR/SRAM Memory Bank. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank1_NORSRAM1: FSMC Bank1 NOR/SRAM1 - * @arg FSMC_Bank1_NORSRAM2: FSMC Bank1 NOR/SRAM2 - * @arg FSMC_Bank1_NORSRAM3: FSMC Bank1 NOR/SRAM3 - * @arg FSMC_Bank1_NORSRAM4: FSMC Bank1 NOR/SRAM4 - * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FSMC_NORSRAMCmd(uint32_t FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NORSRAM_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NOR/SRAM Bank by setting the PBKEN bit in the BCRx register */ - FSMC_Bank1->BTCR[FSMC_Bank] |= BCR_MBKEN_Set; - } - else - { - /* Disable the selected NOR/SRAM Bank by clearing the PBKEN bit in the BCRx register */ - FSMC_Bank1->BTCR[FSMC_Bank] &= BCR_MBKEN_Reset; - } -} - -/** - * @brief Enables or disables the specified NAND Memory Bank. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @param NewState: new state of the FSMC_Bank. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FSMC_NANDCmd(uint32_t FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NAND Bank by setting the PBKEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 |= PCR_PBKEN_Set; - } - else - { - FSMC_Bank3->PCR3 |= PCR_PBKEN_Set; - } - } - else - { - /* Disable the selected NAND Bank by clearing the PBKEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 &= PCR_PBKEN_Reset; - } - else - { - FSMC_Bank3->PCR3 &= PCR_PBKEN_Reset; - } - } -} - -/** - * @brief Enables or disables the PCCARD Memory Bank. - * @param NewState: new state of the PCCARD Memory Bank. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FSMC_PCCARDCmd(FunctionalState NewState) -{ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the PCCARD Bank by setting the PBKEN bit in the PCR4 register */ - FSMC_Bank4->PCR4 |= PCR_PBKEN_Set; - } - else - { - /* Disable the PCCARD Bank by clearing the PBKEN bit in the PCR4 register */ - FSMC_Bank4->PCR4 &= PCR_PBKEN_Reset; - } -} - -/** - * @brief Enables or disables the FSMC NAND ECC feature. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @param NewState: new state of the FSMC NAND ECC feature. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FSMC_NANDECCCmd(uint32_t FSMC_Bank, FunctionalState NewState) -{ - assert_param(IS_FSMC_NAND_BANK(FSMC_Bank)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected NAND Bank ECC function by setting the ECCEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 |= PCR_ECCEN_Set; - } - else - { - FSMC_Bank3->PCR3 |= PCR_ECCEN_Set; - } - } - else - { - /* Disable the selected NAND Bank ECC function by clearing the ECCEN bit in the PCRx register */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->PCR2 &= PCR_ECCEN_Reset; - } - else - { - FSMC_Bank3->PCR3 &= PCR_ECCEN_Reset; - } - } -} - -/** - * @brief Returns the error correction code register value. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @retval The Error Correction Code (ECC) value. - */ -uint32_t FSMC_GetECC(uint32_t FSMC_Bank) -{ - uint32_t eccval = 0x00000000; - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - /* Get the ECCR2 register value */ - eccval = FSMC_Bank2->ECCR2; - } - else - { - /* Get the ECCR3 register value */ - eccval = FSMC_Bank3->ECCR3; - } - /* Return the error correction code value */ - return(eccval); -} - -/** - * @brief Enables or disables the specified FSMC interrupts. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD - * @param FSMC_IT: specifies the FSMC interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. - * @arg FSMC_IT_Level: Level edge detection interrupt. - * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. - * @param NewState: new state of the specified FSMC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void FSMC_ITConfig(uint32_t FSMC_Bank, uint32_t FSMC_IT, FunctionalState NewState) -{ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_IT(FSMC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected FSMC_Bank2 interrupts */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 |= FSMC_IT; - } - /* Enable the selected FSMC_Bank3 interrupts */ - else if (FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 |= FSMC_IT; - } - /* Enable the selected FSMC_Bank4 interrupts */ - else - { - FSMC_Bank4->SR4 |= FSMC_IT; - } - } - else - { - /* Disable the selected FSMC_Bank2 interrupts */ - if(FSMC_Bank == FSMC_Bank2_NAND) - { - - FSMC_Bank2->SR2 &= (uint32_t)~FSMC_IT; - } - /* Disable the selected FSMC_Bank3 interrupts */ - else if (FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= (uint32_t)~FSMC_IT; - } - /* Disable the selected FSMC_Bank4 interrupts */ - else - { - FSMC_Bank4->SR4 &= (uint32_t)~FSMC_IT; - } - } -} - -/** - * @brief Checks whether the specified FSMC flag is set or not. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD - * @param FSMC_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. - * @arg FSMC_FLAG_Level: Level detection Flag. - * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. - * @arg FSMC_FLAG_FEMPT: Fifo empty Flag. - * @retval The new state of FSMC_FLAG (SET or RESET). - */ -FlagStatus FSMC_GetFlagStatus(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) -{ - FlagStatus bitstatus = RESET; - uint32_t tmpsr = 0x00000000; - - /* Check the parameters */ - assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); - assert_param(IS_FSMC_GET_FLAG(FSMC_FLAG)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - tmpsr = FSMC_Bank2->SR2; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - tmpsr = FSMC_Bank3->SR3; - } - /* FSMC_Bank4_PCCARD*/ - else - { - tmpsr = FSMC_Bank4->SR4; - } - - /* Get the flag status */ - if ((tmpsr & FSMC_FLAG) != (uint16_t)RESET ) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the FSMC’s pending flags. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD - * @param FSMC_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg FSMC_FLAG_RisingEdge: Rising egde detection Flag. - * @arg FSMC_FLAG_Level: Level detection Flag. - * @arg FSMC_FLAG_FallingEdge: Falling egde detection Flag. - * @retval None - */ -void FSMC_ClearFlag(uint32_t FSMC_Bank, uint32_t FSMC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_FSMC_GETFLAG_BANK(FSMC_Bank)); - assert_param(IS_FSMC_CLEAR_FLAG(FSMC_FLAG)) ; - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 &= ~FSMC_FLAG; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= ~FSMC_FLAG; - } - /* FSMC_Bank4_PCCARD*/ - else - { - FSMC_Bank4->SR4 &= ~FSMC_FLAG; - } -} - -/** - * @brief Checks whether the specified FSMC interrupt has occurred or not. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD - * @param FSMC_IT: specifies the FSMC interrupt source to check. - * This parameter can be one of the following values: - * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. - * @arg FSMC_IT_Level: Level edge detection interrupt. - * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. - * @retval The new state of FSMC_IT (SET or RESET). - */ -ITStatus FSMC_GetITStatus(uint32_t FSMC_Bank, uint32_t FSMC_IT) -{ - ITStatus bitstatus = RESET; - uint32_t tmpsr = 0x0, itstatus = 0x0, itenable = 0x0; - - /* Check the parameters */ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_GET_IT(FSMC_IT)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - tmpsr = FSMC_Bank2->SR2; - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - tmpsr = FSMC_Bank3->SR3; - } - /* FSMC_Bank4_PCCARD*/ - else - { - tmpsr = FSMC_Bank4->SR4; - } - - itstatus = tmpsr & FSMC_IT; - - itenable = tmpsr & (FSMC_IT >> 3); - if ((itstatus != (uint32_t)RESET) && (itenable != (uint32_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the FSMC’s interrupt pending bits. - * @param FSMC_Bank: specifies the FSMC Bank to be used - * This parameter can be one of the following values: - * @arg FSMC_Bank2_NAND: FSMC Bank2 NAND - * @arg FSMC_Bank3_NAND: FSMC Bank3 NAND - * @arg FSMC_Bank4_PCCARD: FSMC Bank4 PCCARD - * @param FSMC_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg FSMC_IT_RisingEdge: Rising edge detection interrupt. - * @arg FSMC_IT_Level: Level edge detection interrupt. - * @arg FSMC_IT_FallingEdge: Falling edge detection interrupt. - * @retval None - */ -void FSMC_ClearITPendingBit(uint32_t FSMC_Bank, uint32_t FSMC_IT) -{ - /* Check the parameters */ - assert_param(IS_FSMC_IT_BANK(FSMC_Bank)); - assert_param(IS_FSMC_IT(FSMC_IT)); - - if(FSMC_Bank == FSMC_Bank2_NAND) - { - FSMC_Bank2->SR2 &= ~(FSMC_IT >> 3); - } - else if(FSMC_Bank == FSMC_Bank3_NAND) - { - FSMC_Bank3->SR3 &= ~(FSMC_IT >> 3); - } - /* FSMC_Bank4_PCCARD*/ - else - { - FSMC_Bank4->SR4 &= ~(FSMC_IT >> 3); - } -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c deleted file mode 100644 index fd951a3cf..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_gpio.c +++ /dev/null @@ -1,617 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_gpio.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the GPIO firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_gpio.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup GPIO - * @brief GPIO driver modules - * @{ - */ - -/** @defgroup GPIO_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_Defines - * @{ - */ - -/* ------------ RCC registers bit address in the alias region ----------------*/ -#define AFIO_OFFSET (AFIO_BASE - PERIPH_BASE) - -/* --- EVENTCR Register -----*/ - -/* Alias word address of EVOE bit */ -#define EVCR_OFFSET (AFIO_OFFSET + 0x00) -#define EVOE_BitNumber ((uint8_t)0x07) -#define EVCR_EVOE_BB (PERIPH_BB_BASE + (EVCR_OFFSET * 32) + (EVOE_BitNumber * 4)) - - -/* --- MAPR Register ---*/ -/* Alias word address of MII_RMII_SEL bit */ -#define MAPR_OFFSET (AFIO_OFFSET + 0x04) -#define MII_RMII_SEL_BitNumber ((u8)0x17) -#define MAPR_MII_RMII_SEL_BB (PERIPH_BB_BASE + (MAPR_OFFSET * 32) + (MII_RMII_SEL_BitNumber * 4)) - - -#define EVCR_PORTPINCONFIG_MASK ((uint16_t)0xFF80) -#define LSB_MASK ((uint16_t)0xFFFF) -#define DBGAFR_POSITION_MASK ((uint32_t)0x000F0000) -#define DBGAFR_SWJCFG_MASK ((uint32_t)0xF0FFFFFF) -#define DBGAFR_LOCATION_MASK ((uint32_t)0x00200000) -#define DBGAFR_NUMBITS_MASK ((uint32_t)0x00100000) -/** - * @} - */ - -/** @defgroup GPIO_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup GPIO_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the GPIOx peripheral registers to their default reset values. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @retval None - */ -void GPIO_DeInit(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - if (GPIOx == GPIOA) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOA, DISABLE); - } - else if (GPIOx == GPIOB) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOB, DISABLE); - } - else if (GPIOx == GPIOC) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOC, DISABLE); - } - else if (GPIOx == GPIOD) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOD, DISABLE); - } - else if (GPIOx == GPIOE) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOE, DISABLE); - } - else if (GPIOx == GPIOF) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOF, DISABLE); - } - else - { - if (GPIOx == GPIOG) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_GPIOG, DISABLE); - } - } -} - -/** - * @brief Deinitializes the Alternate Functions (remap, event control - * and EXTI configuration) registers to their default reset values. - * @param None - * @retval None - */ -void GPIO_AFIODeInit(void) -{ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_AFIO, DISABLE); -} - -/** - * @brief Initializes the GPIOx peripheral according to the specified - * parameters in the GPIO_InitStruct. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_InitStruct: pointer to a GPIO_InitTypeDef structure that - * contains the configuration information for the specified GPIO peripheral. - * @retval None - */ -void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct) -{ - uint32_t currentmode = 0x00, currentpin = 0x00, pinpos = 0x00, pos = 0x00; - uint32_t tmpreg = 0x00, pinmask = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_MODE(GPIO_InitStruct->GPIO_Mode)); - assert_param(IS_GPIO_PIN(GPIO_InitStruct->GPIO_Pin)); - -/*---------------------------- GPIO Mode Configuration -----------------------*/ - currentmode = ((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x0F); - if ((((uint32_t)GPIO_InitStruct->GPIO_Mode) & ((uint32_t)0x10)) != 0x00) - { - /* Check the parameters */ - assert_param(IS_GPIO_SPEED(GPIO_InitStruct->GPIO_Speed)); - /* Output mode */ - currentmode |= (uint32_t)GPIO_InitStruct->GPIO_Speed; - } -/*---------------------------- GPIO CRL Configuration ------------------------*/ - /* Configure the eight low port pins */ - if (((uint32_t)GPIO_InitStruct->GPIO_Pin & ((uint32_t)0x00FF)) != 0x00) - { - tmpreg = GPIOx->CRL; - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = ((uint32_t)0x01) << pinpos; - /* Get the port pins position */ - currentpin = (GPIO_InitStruct->GPIO_Pin) & pos; - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding low control register bits */ - pinmask = ((uint32_t)0x0F) << pos; - tmpreg &= ~pinmask; - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((uint32_t)0x01) << pinpos); - } - else - { - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((uint32_t)0x01) << pinpos); - } - } - } - } - GPIOx->CRL = tmpreg; - } -/*---------------------------- GPIO CRH Configuration ------------------------*/ - /* Configure the eight high port pins */ - if (GPIO_InitStruct->GPIO_Pin > 0x00FF) - { - tmpreg = GPIOx->CRH; - for (pinpos = 0x00; pinpos < 0x08; pinpos++) - { - pos = (((uint32_t)0x01) << (pinpos + 0x08)); - /* Get the port pins position */ - currentpin = ((GPIO_InitStruct->GPIO_Pin) & pos); - if (currentpin == pos) - { - pos = pinpos << 2; - /* Clear the corresponding high control register bits */ - pinmask = ((uint32_t)0x0F) << pos; - tmpreg &= ~pinmask; - /* Write the mode configuration in the corresponding bits */ - tmpreg |= (currentmode << pos); - /* Reset the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPD) - { - GPIOx->BRR = (((uint32_t)0x01) << (pinpos + 0x08)); - } - /* Set the corresponding ODR bit */ - if (GPIO_InitStruct->GPIO_Mode == GPIO_Mode_IPU) - { - GPIOx->BSRR = (((uint32_t)0x01) << (pinpos + 0x08)); - } - } - } - GPIOx->CRH = tmpreg; - } -} - -/** - * @brief Fills each GPIO_InitStruct member with its default value. - * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will - * be initialized. - * @retval None - */ -void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct) -{ - /* Reset GPIO init structure parameters values */ - GPIO_InitStruct->GPIO_Pin = GPIO_Pin_All; - GPIO_InitStruct->GPIO_Speed = GPIO_Speed_2MHz; - GPIO_InitStruct->GPIO_Mode = GPIO_Mode_IN_FLOATING; -} - -/** - * @brief Reads the specified input port pin. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_Pin_x where x can be (0..15). - * @retval The input port pin value. - */ -uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint8_t bitstatus = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->IDR & GPIO_Pin) != (uint32_t)Bit_RESET) - { - bitstatus = (uint8_t)Bit_SET; - } - else - { - bitstatus = (uint8_t)Bit_RESET; - } - return bitstatus; -} - -/** - * @brief Reads the specified GPIO input data port. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @retval GPIO input data port value. - */ -uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((uint16_t)GPIOx->IDR); -} - -/** - * @brief Reads the specified output data port bit. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to read. - * This parameter can be GPIO_Pin_x where x can be (0..15). - * @retval The output port pin value. - */ -uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint8_t bitstatus = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - - if ((GPIOx->ODR & GPIO_Pin) != (uint32_t)Bit_RESET) - { - bitstatus = (uint8_t)Bit_SET; - } - else - { - bitstatus = (uint8_t)Bit_RESET; - } - return bitstatus; -} - -/** - * @brief Reads the specified GPIO output data port. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @retval GPIO output data port value. - */ -uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - return ((uint16_t)GPIOx->ODR); -} - -/** - * @brief Sets the selected data port bits. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bits to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BSRR = GPIO_Pin; -} - -/** - * @brief Clears the selected data port bits. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bits to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - GPIOx->BRR = GPIO_Pin; -} - -/** - * @brief Sets or clears the selected data port bit. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be one of GPIO_Pin_x where x can be (0..15). - * @param BitVal: specifies the value to be written to the selected bit. - * This parameter can be one of the BitAction enum values: - * @arg Bit_RESET: to clear the port pin - * @arg Bit_SET: to set the port pin - * @retval None - */ -void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GET_GPIO_PIN(GPIO_Pin)); - assert_param(IS_GPIO_BIT_ACTION(BitVal)); - - if (BitVal != Bit_RESET) - { - GPIOx->BSRR = GPIO_Pin; - } - else - { - GPIOx->BRR = GPIO_Pin; - } -} - -/** - * @brief Writes data to the specified GPIO data port. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param PortVal: specifies the value to be written to the port output data register. - * @retval None - */ -void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal) -{ - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - - GPIOx->ODR = PortVal; -} - -/** - * @brief Locks GPIO Pins configuration registers. - * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. - * @param GPIO_Pin: specifies the port bit to be written. - * This parameter can be any combination of GPIO_Pin_x where x can be (0..15). - * @retval None - */ -void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin) -{ - uint32_t tmp = 0x00010000; - - /* Check the parameters */ - assert_param(IS_GPIO_ALL_PERIPH(GPIOx)); - assert_param(IS_GPIO_PIN(GPIO_Pin)); - - tmp |= GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Reset LCKK bit */ - GPIOx->LCKR = GPIO_Pin; - /* Set LCKK bit */ - GPIOx->LCKR = tmp; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; - /* Read LCKK bit*/ - tmp = GPIOx->LCKR; -} - -/** - * @brief Selects the GPIO pin used as Event output. - * @param GPIO_PortSource: selects the GPIO port to be used as source - * for Event output. - * This parameter can be GPIO_PortSourceGPIOx where x can be (A..E). - * @param GPIO_PinSource: specifies the pin for the Event output. - * This parameter can be GPIO_PinSourcex where x can be (0..15). - * @retval None - */ -void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) -{ - uint32_t tmpreg = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_EVENTOUT_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmpreg = AFIO->EVCR; - /* Clear the PORT[6:4] and PIN[3:0] bits */ - tmpreg &= EVCR_PORTPINCONFIG_MASK; - tmpreg |= (uint32_t)GPIO_PortSource << 0x04; - tmpreg |= GPIO_PinSource; - AFIO->EVCR = tmpreg; -} - -/** - * @brief Enables or disables the Event Output. - * @param NewState: new state of the Event output. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void GPIO_EventOutputCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) EVCR_EVOE_BB = (uint32_t)NewState; -} - -/** - * @brief Changes the mapping of the specified pin. - * @param GPIO_Remap: selects the pin to remap. - * This parameter can be one of the following values: - * @arg GPIO_Remap_SPI1 - * @arg GPIO_Remap_I2C1 - * @arg GPIO_Remap_USART1 - * @arg GPIO_Remap_USART2 - * @arg GPIO_PartialRemap_USART3 - * @arg GPIO_FullRemap_USART3 - * @arg GPIO_PartialRemap_TIM1 - * @arg GPIO_FullRemap_TIM1 - * @arg GPIO_PartialRemap1_TIM2 - * @arg GPIO_PartialRemap2_TIM2 - * @arg GPIO_FullRemap_TIM2 - * @arg GPIO_PartialRemap_TIM3 - * @arg GPIO_FullRemap_TIM3 - * @arg GPIO_Remap_TIM4 - * @arg GPIO_Remap1_CAN1 - * @arg GPIO_Remap2_CAN1 - * @arg GPIO_Remap_PD01 - * @arg GPIO_Remap_TIM5CH4_LSI - * @arg GPIO_Remap_ADC1_ETRGINJ - * @arg GPIO_Remap_ADC1_ETRGREG - * @arg GPIO_Remap_ADC2_ETRGINJ - * @arg GPIO_Remap_ADC2_ETRGREG - * @arg GPIO_Remap_ETH - * @arg GPIO_Remap_CAN2 - * @arg GPIO_Remap_SWJ_NoJTRST - * @arg GPIO_Remap_SWJ_JTAGDisable - * @arg GPIO_Remap_SWJ_Disable - * @arg GPIO_Remap_SPI3 - * @arg GPIO_Remap_TIM2ITR1_PTP_SOF - * @arg GPIO_Remap_PTP_PPS - * @note If the GPIO_Remap_TIM2ITR1_PTP_SOF is enabled the TIM2 ITR1 is connected - * to Ethernet PTP output. When Reset TIM2 ITR1 is connected to USB OTG SOF output. - * @param NewState: new state of the port pin remapping. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState) -{ - uint32_t tmp = 0x00, tmp1 = 0x00, tmpreg = 0x00, tmpmask = 0x00; - - /* Check the parameters */ - assert_param(IS_GPIO_REMAP(GPIO_Remap)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - tmpreg = AFIO->MAPR; - - tmpmask = (GPIO_Remap & DBGAFR_POSITION_MASK) >> 0x10; - tmp = GPIO_Remap & LSB_MASK; - - if ((GPIO_Remap & (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) == (DBGAFR_LOCATION_MASK | DBGAFR_NUMBITS_MASK)) - { - tmpreg &= DBGAFR_SWJCFG_MASK; - AFIO->MAPR &= DBGAFR_SWJCFG_MASK; - } - else if ((GPIO_Remap & DBGAFR_NUMBITS_MASK) == DBGAFR_NUMBITS_MASK) - { - tmp1 = ((uint32_t)0x03) << tmpmask; - tmpreg &= ~tmp1; - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - else - { - tmpreg &= ~(tmp << ((GPIO_Remap >> 0x15)*0x10)); - tmpreg |= ~DBGAFR_SWJCFG_MASK; - } - - if (NewState != DISABLE) - { - tmpreg |= (tmp << ((GPIO_Remap >> 0x15)*0x10)); - } - - AFIO->MAPR = tmpreg; -} - -/** - * @brief Selects the GPIO pin used as EXTI Line. - * @param GPIO_PortSource: selects the GPIO port to be used as source for EXTI lines. - * This parameter can be GPIO_PortSourceGPIOx where x can be (A..G). - * @param GPIO_PinSource: specifies the EXTI line to be configured. - * This parameter can be GPIO_PinSourcex where x can be (0..15). - * @retval None - */ -void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource) -{ - uint32_t tmp = 0x00; - /* Check the parameters */ - assert_param(IS_GPIO_EXTI_PORT_SOURCE(GPIO_PortSource)); - assert_param(IS_GPIO_PIN_SOURCE(GPIO_PinSource)); - - tmp = ((uint32_t)0x0F) << (0x04 * (GPIO_PinSource & (uint8_t)0x03)); - AFIO->EXTICR[GPIO_PinSource >> 0x02] &= ~tmp; - AFIO->EXTICR[GPIO_PinSource >> 0x02] |= (((uint32_t)GPIO_PortSource) << (0x04 * (GPIO_PinSource & (uint8_t)0x03))); -} - -/** - * @brief Selects the Ethernet media interface. - * @note This function applies only to STM32 Connectivity line devices. - * @param GPIO_ETH_MediaInterface: specifies the Media Interface mode. - * This parameter can be one of the following values: - * @arg GPIO_ETH_MediaInterface_MII: MII mode - * @arg GPIO_ETH_MediaInterface_RMII: RMII mode - * @retval None - */ -void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface) -{ - assert_param(IS_GPIO_ETH_MEDIA_INTERFACE(GPIO_ETH_MediaInterface)); - - /* Configure MII_RMII selection bit */ - *(__IO uint32_t *) MAPR_MII_RMII_SEL_BB = GPIO_ETH_MediaInterface; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c deleted file mode 100644 index bed0e9d0f..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_i2c.c +++ /dev/null @@ -1,1152 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_i2c.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the I2C firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_i2c.h" -#include "stm32f10x_rcc.h" - - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup I2C - * @brief I2C driver modules - * @{ - */ - -/** @defgroup I2C_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_Defines - * @{ - */ - -/* I2C SPE mask */ -#define CR1_PE_Set ((uint16_t)0x0001) -#define CR1_PE_Reset ((uint16_t)0xFFFE) - -/* I2C START mask */ -#define CR1_START_Set ((uint16_t)0x0100) -#define CR1_START_Reset ((uint16_t)0xFEFF) - -/* I2C STOP mask */ -#define CR1_STOP_Set ((uint16_t)0x0200) -#define CR1_STOP_Reset ((uint16_t)0xFDFF) - -/* I2C ACK mask */ -#define CR1_ACK_Set ((uint16_t)0x0400) -#define CR1_ACK_Reset ((uint16_t)0xFBFF) - -/* I2C ENGC mask */ -#define CR1_ENGC_Set ((uint16_t)0x0040) -#define CR1_ENGC_Reset ((uint16_t)0xFFBF) - -/* I2C SWRST mask */ -#define CR1_SWRST_Set ((uint16_t)0x8000) -#define CR1_SWRST_Reset ((uint16_t)0x7FFF) - -/* I2C PEC mask */ -#define CR1_PEC_Set ((uint16_t)0x1000) -#define CR1_PEC_Reset ((uint16_t)0xEFFF) - -/* I2C ENPEC mask */ -#define CR1_ENPEC_Set ((uint16_t)0x0020) -#define CR1_ENPEC_Reset ((uint16_t)0xFFDF) - -/* I2C ENARP mask */ -#define CR1_ENARP_Set ((uint16_t)0x0010) -#define CR1_ENARP_Reset ((uint16_t)0xFFEF) - -/* I2C NOSTRETCH mask */ -#define CR1_NOSTRETCH_Set ((uint16_t)0x0080) -#define CR1_NOSTRETCH_Reset ((uint16_t)0xFF7F) - -/* I2C registers Masks */ -#define CR1_CLEAR_Mask ((uint16_t)0xFBF5) - -/* I2C DMAEN mask */ -#define CR2_DMAEN_Set ((uint16_t)0x0800) -#define CR2_DMAEN_Reset ((uint16_t)0xF7FF) - -/* I2C LAST mask */ -#define CR2_LAST_Set ((uint16_t)0x1000) -#define CR2_LAST_Reset ((uint16_t)0xEFFF) - -/* I2C FREQ mask */ -#define CR2_FREQ_Reset ((uint16_t)0xFFC0) - -/* I2C ADD0 mask */ -#define OAR1_ADD0_Set ((uint16_t)0x0001) -#define OAR1_ADD0_Reset ((uint16_t)0xFFFE) - -/* I2C ENDUAL mask */ -#define OAR2_ENDUAL_Set ((uint16_t)0x0001) -#define OAR2_ENDUAL_Reset ((uint16_t)0xFFFE) - -/* I2C ADD2 mask */ -#define OAR2_ADD2_Reset ((uint16_t)0xFF01) - -/* I2C F/S mask */ -#define CCR_FS_Set ((uint16_t)0x8000) - -/* I2C CCR mask */ -#define CCR_CCR_Set ((uint16_t)0x0FFF) - -/* I2C FLAG mask */ -#define FLAG_Mask ((uint32_t)0x00FFFFFF) - -/* I2C Interrupt Enable mask */ -#define ITEN_Mask ((uint32_t)0x07000000) - -/** - * @} - */ - -/** @defgroup I2C_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup I2C_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the I2Cx peripheral registers to their default reset values. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval None - */ -void I2C_DeInit(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - if (I2Cx == I2C1) - { - /* Enable I2C1 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, ENABLE); - /* Release I2C1 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C1, DISABLE); - } - else - { - /* Enable I2C2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, ENABLE); - /* Release I2C2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_I2C2, DISABLE); - } -} - -/** - * @brief Initializes the I2Cx peripheral according to the specified - * parameters in the I2C_InitStruct. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_InitStruct: pointer to a I2C_InitTypeDef structure that - * contains the configuration information for the specified I2C peripheral. - * @retval None - */ -void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct) -{ - uint16_t tmpreg = 0, freqrange = 0; - uint16_t result = 0x04; - uint32_t pclk1 = 8000000; - RCC_ClocksTypeDef rcc_clocks; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLOCK_SPEED(I2C_InitStruct->I2C_ClockSpeed)); - assert_param(IS_I2C_MODE(I2C_InitStruct->I2C_Mode)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_InitStruct->I2C_DutyCycle)); - assert_param(IS_I2C_OWN_ADDRESS1(I2C_InitStruct->I2C_OwnAddress1)); - assert_param(IS_I2C_ACK_STATE(I2C_InitStruct->I2C_Ack)); - assert_param(IS_I2C_ACKNOWLEDGE_ADDRESS(I2C_InitStruct->I2C_AcknowledgedAddress)); - -/*---------------------------- I2Cx CR2 Configuration ------------------------*/ - /* Get the I2Cx CR2 value */ - tmpreg = I2Cx->CR2; - /* Clear frequency FREQ[5:0] bits */ - tmpreg &= CR2_FREQ_Reset; - /* Get pclk1 frequency value */ - RCC_GetClocksFreq(&rcc_clocks); - pclk1 = rcc_clocks.PCLK1_Frequency; - /* Set frequency bits depending on pclk1 value */ - freqrange = (uint16_t)(pclk1 / 1000000); - tmpreg |= freqrange; - /* Write to I2Cx CR2 */ - I2Cx->CR2 = tmpreg; - -/*---------------------------- I2Cx CCR Configuration ------------------------*/ - /* Disable the selected I2C peripheral to configure TRISE */ - I2Cx->CR1 &= CR1_PE_Reset; - /* Reset tmpreg value */ - /* Clear F/S, DUTY and CCR[11:0] bits */ - tmpreg = 0; - - /* Configure speed in standard mode */ - if (I2C_InitStruct->I2C_ClockSpeed <= 100000) - { - /* Standard mode speed calculate */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed << 1)); - /* Test if CCR value is under 0x4*/ - if (result < 0x04) - { - /* Set minimum allowed value */ - result = 0x04; - } - /* Set speed value for standard mode */ - tmpreg |= result; - /* Set Maximum Rise Time for standard mode */ - I2Cx->TRISE = freqrange + 1; - } - /* Configure speed in fast mode */ - else /*(I2C_InitStruct->I2C_ClockSpeed <= 400000)*/ - { - if (I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_2) - { - /* Fast mode speed calculate: Tlow/Thigh = 2 */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 3)); - } - else /*I2C_InitStruct->I2C_DutyCycle == I2C_DutyCycle_16_9*/ - { - /* Fast mode speed calculate: Tlow/Thigh = 16/9 */ - result = (uint16_t)(pclk1 / (I2C_InitStruct->I2C_ClockSpeed * 25)); - /* Set DUTY bit */ - result |= I2C_DutyCycle_16_9; - } - - /* Test if CCR value is under 0x1*/ - if ((result & CCR_CCR_Set) == 0) - { - /* Set minimum allowed value */ - result |= (uint16_t)0x0001; - } - /* Set speed value and set F/S bit for fast mode */ - tmpreg |= (uint16_t)(result | CCR_FS_Set); - /* Set Maximum Rise Time for fast mode */ - I2Cx->TRISE = (uint16_t)(((freqrange * (uint16_t)300) / (uint16_t)1000) + (uint16_t)1); - } - - /* Write to I2Cx CCR */ - I2Cx->CCR = tmpreg; - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - -/*---------------------------- I2Cx CR1 Configuration ------------------------*/ - /* Get the I2Cx CR1 value */ - tmpreg = I2Cx->CR1; - /* Clear ACK, SMBTYPE and SMBUS bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure I2Cx: mode and acknowledgement */ - /* Set SMBTYPE and SMBUS bits according to I2C_Mode value */ - /* Set ACK bit according to I2C_Ack value */ - tmpreg |= (uint16_t)((uint32_t)I2C_InitStruct->I2C_Mode | I2C_InitStruct->I2C_Ack); - /* Write to I2Cx CR1 */ - I2Cx->CR1 = tmpreg; - -/*---------------------------- I2Cx OAR1 Configuration -----------------------*/ - /* Set I2Cx Own Address1 and acknowledged address */ - I2Cx->OAR1 = (I2C_InitStruct->I2C_AcknowledgedAddress | I2C_InitStruct->I2C_OwnAddress1); -} - -/** - * @brief Fills each I2C_InitStruct member with its default value. - * @param I2C_InitStruct: pointer to an I2C_InitTypeDef structure which will be initialized. - * @retval None - */ -void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct) -{ -/*---------------- Reset I2C init structure parameters values ----------------*/ - /* initialize the I2C_ClockSpeed member */ - I2C_InitStruct->I2C_ClockSpeed = 5000; - /* Initialize the I2C_Mode member */ - I2C_InitStruct->I2C_Mode = I2C_Mode_I2C; - /* Initialize the I2C_DutyCycle member */ - I2C_InitStruct->I2C_DutyCycle = I2C_DutyCycle_2; - /* Initialize the I2C_OwnAddress1 member */ - I2C_InitStruct->I2C_OwnAddress1 = 0; - /* Initialize the I2C_Ack member */ - I2C_InitStruct->I2C_Ack = I2C_Ack_Disable; - /* Initialize the I2C_AcknowledgedAddress member */ - I2C_InitStruct->I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit; -} - -/** - * @brief Enables or disables the specified I2C peripheral. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C peripheral */ - I2Cx->CR1 |= CR1_PE_Set; - } - else - { - /* Disable the selected I2C peripheral */ - I2Cx->CR1 &= CR1_PE_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C DMA requests. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C DMA transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C DMA requests */ - I2Cx->CR2 |= CR2_DMAEN_Set; - } - else - { - /* Disable the selected I2C DMA requests */ - I2Cx->CR2 &= CR2_DMAEN_Reset; - } -} - -/** - * @brief Specifies that the next DMA transfer is the last one. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C DMA last transfer. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Next DMA transfer is the last transfer */ - I2Cx->CR2 |= CR2_LAST_Set; - } - else - { - /* Next DMA transfer is not the last transfer */ - I2Cx->CR2 &= CR2_LAST_Reset; - } -} - -/** - * @brief Generates I2Cx communication START condition. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C START condition generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Generate a START condition */ - I2Cx->CR1 |= CR1_START_Set; - } - else - { - /* Disable the START condition generation */ - I2Cx->CR1 &= CR1_START_Reset; - } -} - -/** - * @brief Generates I2Cx communication STOP condition. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C STOP condition generation. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Generate a STOP condition */ - I2Cx->CR1 |= CR1_STOP_Set; - } - else - { - /* Disable the STOP condition generation */ - I2Cx->CR1 &= CR1_STOP_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C acknowledge feature. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C Acknowledgement. - * This parameter can be: ENABLE or DISABLE. - * @retval None. - */ -void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the acknowledgement */ - I2Cx->CR1 |= CR1_ACK_Set; - } - else - { - /* Disable the acknowledgement */ - I2Cx->CR1 &= CR1_ACK_Reset; - } -} - -/** - * @brief Configures the specified I2C own address2. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param Address: specifies the 7bit I2C own address2. - * @retval None. - */ -void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, uint8_t Address) -{ - uint16_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - - /* Get the old register value */ - tmpreg = I2Cx->OAR2; - - /* Reset I2Cx Own address2 bit [7:1] */ - tmpreg &= OAR2_ADD2_Reset; - - /* Set I2Cx Own address2 */ - tmpreg |= (uint16_t)((uint16_t)Address & (uint16_t)0x00FE); - - /* Store the new register value */ - I2Cx->OAR2 = tmpreg; -} - -/** - * @brief Enables or disables the specified I2C dual addressing mode. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C dual addressing mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable dual addressing mode */ - I2Cx->OAR2 |= OAR2_ENDUAL_Set; - } - else - { - /* Disable dual addressing mode */ - I2Cx->OAR2 &= OAR2_ENDUAL_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C general call feature. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C General call. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable generall call */ - I2Cx->CR1 |= CR1_ENGC_Set; - } - else - { - /* Disable generall call */ - I2Cx->CR1 &= CR1_ENGC_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C interrupts. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_IT: specifies the I2C interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg I2C_IT_BUF: Buffer interrupt mask - * @arg I2C_IT_EVT: Event interrupt mask - * @arg I2C_IT_ERR: Error interrupt mask - * @param NewState: new state of the specified I2C interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_ITConfig(I2C_TypeDef* I2Cx, uint16_t I2C_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_I2C_CONFIG_IT(I2C_IT)); - - if (NewState != DISABLE) - { - /* Enable the selected I2C interrupts */ - I2Cx->CR2 |= I2C_IT; - } - else - { - /* Disable the selected I2C interrupts */ - I2Cx->CR2 &= (uint16_t)~I2C_IT; - } -} - -/** - * @brief Sends a data byte through the I2Cx peripheral. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param Data: Byte to be transmitted.. - * @retval None - */ -void I2C_SendData(I2C_TypeDef* I2Cx, uint8_t Data) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Write in the DR register the data to be sent */ - I2Cx->DR = Data; -} - -/** - * @brief Returns the most recent received data by the I2Cx peripheral. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval The value of the received data. - */ -uint8_t I2C_ReceiveData(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Return the data in the DR register */ - return (uint8_t)I2Cx->DR; -} - -/** - * @brief Transmits the address byte to select the slave device. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param Address: specifies the slave address which will be transmitted - * @param I2C_Direction: specifies whether the I2C device will be a - * Transmitter or a Receiver. This parameter can be one of the following values - * @arg I2C_Direction_Transmitter: Transmitter mode - * @arg I2C_Direction_Receiver: Receiver mode - * @retval None. - */ -void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, uint8_t Address, uint8_t I2C_Direction) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DIRECTION(I2C_Direction)); - /* Test on the direction to set/reset the read/write bit */ - if (I2C_Direction != I2C_Direction_Transmitter) - { - /* Set the address bit0 for read */ - Address |= OAR1_ADD0_Set; - } - else - { - /* Reset the address bit0 for write */ - Address &= OAR1_ADD0_Reset; - } - /* Send the address */ - I2Cx->DR = Address; -} - -/** - * @brief Reads the specified I2C register and returns its value. - * @param I2C_Register: specifies the register to read. - * This parameter can be one of the following values: - * @arg I2C_Register_CR1: CR1 register. - * @arg I2C_Register_CR2: CR2 register. - * @arg I2C_Register_OAR1: OAR1 register. - * @arg I2C_Register_OAR2: OAR2 register. - * @arg I2C_Register_DR: DR register. - * @arg I2C_Register_SR1: SR1 register. - * @arg I2C_Register_SR2: SR2 register. - * @arg I2C_Register_CCR: CCR register. - * @arg I2C_Register_TRISE: TRISE register. - * @retval The value of the read register. - */ -uint16_t I2C_ReadRegister(I2C_TypeDef* I2Cx, uint8_t I2C_Register) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_REGISTER(I2C_Register)); - - tmp = (uint32_t) I2Cx; - tmp += I2C_Register; - - /* Return the selected register value */ - return (*(__IO uint16_t *) tmp); -} - -/** - * @brief Enables or disables the specified I2C software reset. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C software reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Peripheral under reset */ - I2Cx->CR1 |= CR1_SWRST_Set; - } - else - { - /* Peripheral not under reset */ - I2Cx->CR1 &= CR1_SWRST_Reset; - } -} - -/** - * @brief Drives the SMBusAlert pin high or low for the specified I2C. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_SMBusAlert: specifies SMBAlert pin level. - * This parameter can be one of the following values: - * @arg I2C_SMBusAlert_Low: SMBAlert pin driven low - * @arg I2C_SMBusAlert_High: SMBAlert pin driven high - * @retval None - */ -void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, uint16_t I2C_SMBusAlert) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_SMBUS_ALERT(I2C_SMBusAlert)); - if (I2C_SMBusAlert == I2C_SMBusAlert_Low) - { - /* Drive the SMBusAlert pin Low */ - I2Cx->CR1 |= I2C_SMBusAlert_Low; - } - else - { - /* Drive the SMBusAlert pin High */ - I2Cx->CR1 &= I2C_SMBusAlert_High; - } -} - -/** - * @brief Enables or disables the specified I2C PEC transfer. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2C PEC transmission. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC transmission */ - I2Cx->CR1 |= CR1_PEC_Set; - } - else - { - /* Disable the selected I2C PEC transmission */ - I2Cx->CR1 &= CR1_PEC_Reset; - } -} - -/** - * @brief Selects the specified I2C PEC position. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_PECPosition: specifies the PEC position. - * This parameter can be one of the following values: - * @arg I2C_PECPosition_Next: indicates that the next byte is PEC - * @arg I2C_PECPosition_Current: indicates that current byte is PEC - * @retval None - */ -void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, uint16_t I2C_PECPosition) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_PEC_POSITION(I2C_PECPosition)); - if (I2C_PECPosition == I2C_PECPosition_Next) - { - /* Next byte in shift register is PEC */ - I2Cx->CR1 |= I2C_PECPosition_Next; - } - else - { - /* Current byte in shift register is PEC */ - I2Cx->CR1 &= I2C_PECPosition_Current; - } -} - -/** - * @brief Enables or disables the PEC value calculation of the transfered bytes. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx PEC value calculation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C PEC calculation */ - I2Cx->CR1 |= CR1_ENPEC_Set; - } - else - { - /* Disable the selected I2C PEC calculation */ - I2Cx->CR1 &= CR1_ENPEC_Reset; - } -} - -/** - * @brief Returns the PEC value for the specified I2C. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval The PEC value. - */ -uint8_t I2C_GetPEC(I2C_TypeDef* I2Cx) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Return the selected I2C PEC value */ - return ((I2Cx->SR2) >> 8); -} - -/** - * @brief Enables or disables the specified I2C ARP. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx ARP. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected I2C ARP */ - I2Cx->CR1 |= CR1_ENARP_Set; - } - else - { - /* Disable the selected I2C ARP */ - I2Cx->CR1 &= CR1_ENARP_Reset; - } -} - -/** - * @brief Enables or disables the specified I2C Clock stretching. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param NewState: new state of the I2Cx Clock stretching. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState == DISABLE) - { - /* Enable the selected I2C Clock stretching */ - I2Cx->CR1 |= CR1_NOSTRETCH_Set; - } - else - { - /* Disable the selected I2C Clock stretching */ - I2Cx->CR1 &= CR1_NOSTRETCH_Reset; - } -} - -/** - * @brief Selects the specified I2C fast mode duty cycle. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_DutyCycle: specifies the fast mode duty cycle. - * This parameter can be one of the following values: - * @arg I2C_DutyCycle_2: I2C fast mode Tlow/Thigh = 2 - * @arg I2C_DutyCycle_16_9: I2C fast mode Tlow/Thigh = 16/9 - * @retval None - */ -void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, uint16_t I2C_DutyCycle) -{ - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_DUTY_CYCLE(I2C_DutyCycle)); - if (I2C_DutyCycle != I2C_DutyCycle_16_9) - { - /* I2C fast mode Tlow/Thigh=2 */ - I2Cx->CCR &= I2C_DutyCycle_2; - } - else - { - /* I2C fast mode Tlow/Thigh=16/9 */ - I2Cx->CCR |= I2C_DutyCycle_16_9; - } -} - -/** - * @brief Returns the last I2Cx Event. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @retval The last event - */ -uint32_t I2C_GetLastEvent(I2C_TypeDef* I2Cx) -{ - uint32_t lastevent = 0; - uint32_t flag1 = 0, flag2 = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - /* Return status */ - return lastevent; -} - -/** - * @brief Checks whether the last I2Cx Event is equal to the one passed - * as parameter. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_EVENT: specifies the event to be checked. - * This parameter can be one of the following values: - * @arg I2C_EVENT_SLAVE_ADDRESS_MATCHED : EV1 - * @arg I2C_EVENT_SLAVE_BYTE_RECEIVED : EV2 - * @arg I2C_EVENT_SLAVE_BYTE_TRANSMITTED : EV3 - * @arg I2C_EVENT_SLAVE_ACK_FAILURE : EV3-2 - * @arg I2C_EVENT_MASTER_MODE_SELECT : EV5 - * @arg I2C_EVENT_MASTER_MODE_SELECTED : EV6 - * @arg I2C_EVENT_MASTER_BYTE_RECEIVED : EV7 - * @arg I2C_EVENT_MASTER_BYTE_TRANSMITTED : EV8 - * @arg I2C_EVENT_MASTER_MODE_ADDRESS10 : EV9 - * @arg I2C_EVENT_SLAVE_STOP_DETECTED : EV4 - * @retval An ErrorStatus enumuration value: - * - SUCCESS: Last event is equal to the I2C_EVENT - * - ERROR: Last event is different from the I2C_EVENT - */ -ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, uint32_t I2C_EVENT) -{ - uint32_t lastevent = 0; - uint32_t flag1 = 0, flag2 = 0; - ErrorStatus status = ERROR; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_EVENT(I2C_EVENT)); - /* Read the I2Cx status register */ - flag1 = I2Cx->SR1; - flag2 = I2Cx->SR2; - flag2 = flag2 << 16; - /* Get the last event value from I2C status register */ - lastevent = (flag1 | flag2) & FLAG_Mask; - /* Check whether the last event is equal to I2C_EVENT */ - if (lastevent == I2C_EVENT ) - { - /* SUCCESS: last event is equal to I2C_EVENT */ - status = SUCCESS; - } - else - { - /* ERROR: last event is different from I2C_EVENT */ - status = ERROR; - } - /* Return status */ - return status; -} - -/** - * @brief Checks whether the specified I2C flag is set or not. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2C_FLAG_DUALF: Dual flag (Slave mode) - * @arg I2C_FLAG_SMBHOST: SMBus host header (Slave mode) - * @arg I2C_FLAG_SMBDEFAULT: SMBus default header (Slave mode) - * @arg I2C_FLAG_GENCALL: General call header flag (Slave mode) - * @arg I2C_FLAG_TRA: Transmitter/Receiver flag - * @arg I2C_FLAG_BUSY: Bus busy flag - * @arg I2C_FLAG_MSL: Master/Slave flag - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * @arg I2C_FLAG_TXE: Data register empty flag (Transmitter) - * @arg I2C_FLAG_RXNE: Data register not empty (Receiver) flag - * @arg I2C_FLAG_STOPF: Stop detection flag (Slave mode) - * @arg I2C_FLAG_ADD10: 10-bit header sent flag (Master mode) - * @arg I2C_FLAG_BTF: Byte transfer finished flag - * @arg I2C_FLAG_ADDR: Address sent flag (Master mode) “ADSL” - * Address matched flag (Slave mode)”ENDAD” - * @arg I2C_FLAG_SB: Start bit flag (Master mode) - * @retval The new state of I2C_FLAG (SET or RESET). - */ -FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) -{ - FlagStatus bitstatus = RESET; - __IO uint32_t i2creg = 0, i2cxbase = 0; - - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_FLAG(I2C_FLAG)); - - /* Get the I2Cx peripheral base address */ - i2cxbase = (uint32_t)I2Cx; - - /* Read flag register index */ - i2creg = I2C_FLAG >> 28; - - /* Get bit[23:0] of the flag */ - I2C_FLAG &= FLAG_Mask; - - if(i2creg != 0) - { - /* Get the I2Cx SR1 register address */ - i2cxbase += 0x14; - } - else - { - /* Flag in I2Cx SR2 Register */ - I2C_FLAG = (uint32_t)(I2C_FLAG >> 16); - /* Get the I2Cx SR2 register address */ - i2cxbase += 0x18; - } - - if(((*(__IO uint32_t *)i2cxbase) & I2C_FLAG) != (uint32_t)RESET) - { - /* I2C_FLAG is set */ - bitstatus = SET; - } - else - { - /* I2C_FLAG is reset */ - bitstatus = RESET; - } - - /* Return the I2C_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the I2Cx's pending flags. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * - * @note - * - STOPF (STOP detection) is cleared by software sequence: a read operation - * to I2C_SR1 register (I2C_GetFlagStatus()) followed by a write operation - * to I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). - * - ADD10 (10-bit header sent) is cleared by software sequence: a read - * operation to I2C_SR1 (I2C_GetFlagStatus()) followed by writing the - * second byte of the address in DR register. - * - BTF (Byte Transfer Finished) is cleared by software sequence: a read - * operation to I2C_SR1 register (I2C_GetFlagStatus()) followed by a - * read/write to I2C_DR register (I2C_SendData()). - * - ADDR (Address sent) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetFlagStatus()) followed by a read operation to - * I2C_SR2 register ((void)(I2Cx->SR2)). - * - SB (Start Bit) is cleared software sequence: a read operation to I2C_SR1 - * register (I2C_GetFlagStatus()) followed by a write operation to I2C_DR - * register (I2C_SendData()). - * @retval None - */ -void I2C_ClearFlag(I2C_TypeDef* I2Cx, uint32_t I2C_FLAG) -{ - uint32_t flagpos = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_FLAG(I2C_FLAG)); - /* Get the I2C flag position */ - flagpos = I2C_FLAG & FLAG_Mask; - /* Clear the selected I2C flag */ - I2Cx->SR1 = (uint16_t)~flagpos; -} - -/** - * @brief Checks whether the specified I2C interrupt has occurred or not. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_IT: specifies the interrupt source to check. - * This parameter can be one of the following values: - * @arg I2C_IT_SMBALERT: SMBus Alert flag - * @arg I2C_IT_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_IT_PECERR: PEC error in reception flag - * @arg I2C_IT_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_IT_AF: Acknowledge failure flag - * @arg I2C_IT_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_IT_BERR: Bus error flag - * @arg I2C_IT_TXE: Data register empty flag (Transmitter) - * @arg I2C_IT_RXNE: Data register not empty (Receiver) flag - * @arg I2C_IT_STOPF: Stop detection flag (Slave mode) - * @arg I2C_IT_ADD10: 10-bit header sent flag (Master mode) - * @arg I2C_IT_BTF: Byte transfer finished flag - * @arg I2C_IT_ADDR: Address sent flag (Master mode) “ADSL” - * Address matched flag (Slave mode)”ENDAD” - * @arg I2C_IT_SB: Start bit flag (Master mode) - * @retval The new state of I2C_IT (SET or RESET). - */ -ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, uint32_t I2C_IT) -{ - ITStatus bitstatus = RESET; - uint32_t enablestatus = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_GET_IT(I2C_IT)); - /* Check if the interrupt source is enabled or not */ - enablestatus = (uint32_t)(((I2C_IT & ITEN_Mask) >> 16) & (I2Cx->CR2)) ; - /* Get bit[23:0] of the flag */ - I2C_IT &= FLAG_Mask; - /* Check the status of the specified I2C flag */ - if (((I2Cx->SR1 & I2C_IT) != (uint32_t)RESET) && enablestatus) - { - /* I2C_IT is set */ - bitstatus = SET; - } - else - { - /* I2C_IT is reset */ - bitstatus = RESET; - } - /* Return the I2C_IT status */ - return bitstatus; -} - -/** - * @brief Clears the I2Cx’s interrupt pending bits. - * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. - * @param I2C_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg I2C_IT_SMBALERT: SMBus Alert interrupt - * @arg I2C_IT_TIMEOUT: Timeout or Tlow error interrupt - * @arg I2C_IT_PECERR: PEC error in reception interrupt - * @arg I2C_IT_OVR: Overrun/Underrun interrupt (Slave mode) - * @arg I2C_IT_AF: Acknowledge failure interrupt - * @arg I2C_IT_ARLO: Arbitration lost interrupt (Master mode) - * @arg I2C_IT_BERR: Bus error interrupt - * - * @note - * - STOPF (STOP detection) is cleared by software sequence: a read operation - * to I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to - * I2C_CR1 register (I2C_Cmd() to re-enable the I2C peripheral). - * - ADD10 (10-bit header sent) is cleared by software sequence: a read - * operation to I2C_SR1 (I2C_GetITStatus()) followed by writing the second - * byte of the address in I2C_DR register. - * - BTF (Byte Transfer Finished) is cleared by software sequence: a read - * operation to I2C_SR1 register (I2C_GetITStatus()) followed by a - * read/write to I2C_DR register (I2C_SendData()). - * - ADDR (Address sent) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetITStatus()) followed by a read operation to - * I2C_SR2 register ((void)(I2Cx->SR2)). - * - SB (Start Bit) is cleared by software sequence: a read operation to - * I2C_SR1 register (I2C_GetITStatus()) followed by a write operation to - * I2C_DR register (I2C_SendData()). - * @retval None - */ -void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, uint32_t I2C_IT) -{ - uint32_t flagpos = 0; - /* Check the parameters */ - assert_param(IS_I2C_ALL_PERIPH(I2Cx)); - assert_param(IS_I2C_CLEAR_IT(I2C_IT)); - /* Get the I2C flag position */ - flagpos = I2C_IT & FLAG_Mask; - /* Clear the selected I2C flag */ - I2Cx->SR1 = (uint16_t)~flagpos; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c deleted file mode 100644 index 7d6fe8235..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_iwdg.c +++ /dev/null @@ -1,189 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_iwdg.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the IWDG firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_iwdg.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup IWDG - * @brief IWDG driver modules - * @{ - */ - -/** @defgroup IWDG_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_Defines - * @{ - */ - -/* ---------------------- IWDG registers bit mask ----------------------------*/ - -/* KR register bit mask */ -#define KR_KEY_Reload ((uint16_t)0xAAAA) -#define KR_KEY_Enable ((uint16_t)0xCCCC) - -/** - * @} - */ - -/** @defgroup IWDG_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup IWDG_Private_Functions - * @{ - */ - -/** - * @brief Enables or disables write access to IWDG_PR and IWDG_RLR registers. - * @param IWDG_WriteAccess: new state of write access to IWDG_PR and IWDG_RLR registers. - * This parameter can be one of the following values: - * @arg IWDG_WriteAccess_Enable: Enable write access to IWDG_PR and IWDG_RLR registers - * @arg IWDG_WriteAccess_Disable: Disable write access to IWDG_PR and IWDG_RLR registers - * @retval None - */ -void IWDG_WriteAccessCmd(uint16_t IWDG_WriteAccess) -{ - /* Check the parameters */ - assert_param(IS_IWDG_WRITE_ACCESS(IWDG_WriteAccess)); - IWDG->KR = IWDG_WriteAccess; -} - -/** - * @brief Sets IWDG Prescaler value. - * @param IWDG_Prescaler: specifies the IWDG Prescaler value. - * This parameter can be one of the following values: - * @arg IWDG_Prescaler_4: IWDG prescaler set to 4 - * @arg IWDG_Prescaler_8: IWDG prescaler set to 8 - * @arg IWDG_Prescaler_16: IWDG prescaler set to 16 - * @arg IWDG_Prescaler_32: IWDG prescaler set to 32 - * @arg IWDG_Prescaler_64: IWDG prescaler set to 64 - * @arg IWDG_Prescaler_128: IWDG prescaler set to 128 - * @arg IWDG_Prescaler_256: IWDG prescaler set to 256 - * @retval None - */ -void IWDG_SetPrescaler(uint8_t IWDG_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_IWDG_PRESCALER(IWDG_Prescaler)); - IWDG->PR = IWDG_Prescaler; -} - -/** - * @brief Sets IWDG Reload value. - * @param Reload: specifies the IWDG Reload value. - * This parameter must be a number between 0 and 0x0FFF. - * @retval None - */ -void IWDG_SetReload(uint16_t Reload) -{ - /* Check the parameters */ - assert_param(IS_IWDG_RELOAD(Reload)); - IWDG->RLR = Reload; -} - -/** - * @brief Reloads IWDG counter with value defined in the reload register - * (write access to IWDG_PR and IWDG_RLR registers disabled). - * @param None - * @retval None - */ -void IWDG_ReloadCounter(void) -{ - IWDG->KR = KR_KEY_Reload; -} - -/** - * @brief Enables IWDG (write access to IWDG_PR and IWDG_RLR registers disabled). - * @param None - * @retval None - */ -void IWDG_Enable(void) -{ - IWDG->KR = KR_KEY_Enable; -} - -/** - * @brief Checks whether the specified IWDG flag is set or not. - * @param IWDG_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg IWDG_FLAG_PVU: Prescaler Value Update on going - * @arg IWDG_FLAG_RVU: Reload Value Update on going - * @retval The new state of IWDG_FLAG (SET or RESET). - */ -FlagStatus IWDG_GetFlagStatus(uint16_t IWDG_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_IWDG_FLAG(IWDG_FLAG)); - if ((IWDG->SR & IWDG_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c deleted file mode 100644 index fbafe42a2..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_pwr.c +++ /dev/null @@ -1,311 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_pwr.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the PWR firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup PWR - * @brief PWR driver modules - * @{ - */ - -/** @defgroup PWR_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_Defines - * @{ - */ - -/* --------- PWR registers bit address in the alias region ---------- */ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ - -/* Alias word address of DBP bit */ -#define CR_OFFSET (PWR_OFFSET + 0x00) -#define DBP_BitNumber 0x08 -#define CR_DBP_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4)) - -/* Alias word address of PVDE bit */ -#define PVDE_BitNumber 0x04 -#define CR_PVDE_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of EWUP bit */ -#define CSR_OFFSET (PWR_OFFSET + 0x04) -#define EWUP_BitNumber 0x08 -#define CSR_EWUP_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4)) - -/* ------------------ PWR registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_PDDS_Set ((uint32_t)0x00000002) -#define CR_DS_Mask ((uint32_t)0xFFFFFFFC) -#define CR_CWUF_Set ((uint32_t)0x00000004) -#define CR_PLS_Mask ((uint32_t)0xFFFFFF1F) - -/* --------- Cortex System Control register bit mask ---------------- */ - -/* Cortex System Control register address */ -#define SCB_SysCtrl ((uint32_t)0xE000ED10) - -/* SLEEPDEEP bit mask */ -#define SysCtrl_SLEEPDEEP_Set ((uint32_t)0x00000004) -/** - * @} - */ - -/** @defgroup PWR_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup PWR_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the PWR peripheral registers to their default reset values. - * @param None - * @retval None - */ -void PWR_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_PWR, DISABLE); -} - -/** - * @brief Enables or disables access to the RTC and backup registers. - * @param NewState: new state of the access to the RTC and backup registers. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_BackupAccessCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_DBP_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Power Voltage Detector(PVD). - * @param NewState: new state of the PVD. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_PVDCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD). - * @param PWR_PVDLevel: specifies the PVD detection level - * This parameter can be one of the following values: - * @arg PWR_PVDLevel_2V2: PVD detection level set to 2.2V - * @arg PWR_PVDLevel_2V3: PVD detection level set to 2.3V - * @arg PWR_PVDLevel_2V4: PVD detection level set to 2.4V - * @arg PWR_PVDLevel_2V5: PVD detection level set to 2.5V - * @arg PWR_PVDLevel_2V6: PVD detection level set to 2.6V - * @arg PWR_PVDLevel_2V7: PVD detection level set to 2.7V - * @arg PWR_PVDLevel_2V8: PVD detection level set to 2.8V - * @arg PWR_PVDLevel_2V9: PVD detection level set to 2.9V - * @retval None - */ -void PWR_PVDLevelConfig(uint32_t PWR_PVDLevel) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_PWR_PVD_LEVEL(PWR_PVDLevel)); - tmpreg = PWR->CR; - /* Clear PLS[7:5] bits */ - tmpreg &= CR_PLS_Mask; - /* Set PLS[7:5] bits according to PWR_PVDLevel value */ - tmpreg |= PWR_PVDLevel; - /* Store the new value */ - PWR->CR = tmpreg; -} - -/** - * @brief Enables or disables the WakeUp Pin functionality. - * @param NewState: new state of the WakeUp Pin functionality. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void PWR_WakeUpPinCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_EWUP_BB = (uint32_t)NewState; -} - -/** - * @brief Enters STOP mode. - * @param PWR_Regulator: specifies the regulator state in STOP mode. - * This parameter can be one of the following values: - * @arg PWR_Regulator_ON: STOP mode with regulator ON - * @arg PWR_Regulator_LowPower: STOP mode with regulator in low power mode - * @param PWR_STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction. - * This parameter can be one of the following values: - * @arg PWR_STOPEntry_WFI: enter STOP mode with WFI instruction - * @arg PWR_STOPEntry_WFE: enter STOP mode with WFE instruction - * @retval None - */ -void PWR_EnterSTOPMode(uint32_t PWR_Regulator, uint8_t PWR_STOPEntry) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_PWR_REGULATOR(PWR_Regulator)); - assert_param(IS_PWR_STOP_ENTRY(PWR_STOPEntry)); - - /* Select the regulator state in STOP mode ---------------------------------*/ - tmpreg = PWR->CR; - /* Clear PDDS and LPDS bits */ - tmpreg &= CR_DS_Mask; - /* Set LPDS bit according to PWR_Regulator value */ - tmpreg |= PWR_Regulator; - /* Store the new value */ - PWR->CR = tmpreg; - /* Set SLEEPDEEP bit of Cortex System Control Register */ - *(__IO uint32_t *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set; - - /* Select STOP mode entry --------------------------------------------------*/ - if(PWR_STOPEntry == PWR_STOPEntry_WFI) - { - /* Request Wait For Interrupt */ - __WFI(); - } - else - { - /* Request Wait For Event */ - __WFE(); - } -} - -/** - * @brief Enters STANDBY mode. - * @param None - * @retval None - */ -void PWR_EnterSTANDBYMode(void) -{ - /* Clear Wake-up flag */ - PWR->CR |= CR_CWUF_Set; - /* Select STANDBY mode */ - PWR->CR |= CR_PDDS_Set; - /* Set SLEEPDEEP bit of Cortex System Control Register */ - *(__IO uint32_t *) SCB_SysCtrl |= SysCtrl_SLEEPDEEP_Set; -/* This option is used to ensure that store operations are completed */ -#if defined ( __CC_ARM ) - __force_stores(); -#endif - /* Request Wait For Interrupt */ - __WFI(); -} - -/** - * @brief Checks whether the specified PWR flag is set or not. - * @param PWR_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - * @arg PWR_FLAG_PVDO: PVD Output - * @retval The new state of PWR_FLAG (SET or RESET). - */ -FlagStatus PWR_GetFlagStatus(uint32_t PWR_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_PWR_GET_FLAG(PWR_FLAG)); - - if ((PWR->CSR & PWR_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the PWR's pending flags. - * @param PWR_FLAG: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - * @retval None - */ -void PWR_ClearFlag(uint32_t PWR_FLAG) -{ - /* Check the parameters */ - assert_param(IS_PWR_CLEAR_FLAG(PWR_FLAG)); - - PWR->CR |= PWR_FLAG << 2; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c deleted file mode 100644 index d506eb9fb..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rcc.c +++ /dev/null @@ -1,1447 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rcc.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the RCC firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup RCC - * @brief RCC driver modules - * @{ - */ - -/** @defgroup RCC_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Defines - * @{ - */ - -/* ------------ RCC registers bit address in the alias region ----------- */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) - -/* --- CR Register ---*/ - -/* Alias word address of HSION bit */ -#define CR_OFFSET (RCC_OFFSET + 0x00) -#define HSION_BitNumber 0x00 -#define CR_HSION_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (HSION_BitNumber * 4)) - -/* Alias word address of PLLON bit */ -#define PLLON_BitNumber 0x18 -#define CR_PLLON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLLON_BitNumber * 4)) - -#ifdef STM32F10X_CL - /* Alias word address of PLL2ON bit */ - #define PLL2ON_BitNumber 0x1A - #define CR_PLL2ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL2ON_BitNumber * 4)) - - /* Alias word address of PLL3ON bit */ - #define PLL3ON_BitNumber 0x1C - #define CR_PLL3ON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PLL3ON_BitNumber * 4)) -#endif /* STM32F10X_CL */ - -/* Alias word address of CSSON bit */ -#define CSSON_BitNumber 0x13 -#define CR_CSSON_BB (PERIPH_BB_BASE + (CR_OFFSET * 32) + (CSSON_BitNumber * 4)) - -/* --- CFGR Register ---*/ - -/* Alias word address of USBPRE bit */ -#define CFGR_OFFSET (RCC_OFFSET + 0x04) - -#ifndef STM32F10X_CL - #define USBPRE_BitNumber 0x16 - #define CFGR_USBPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (USBPRE_BitNumber * 4)) -#else - #define OTGFSPRE_BitNumber 0x16 - #define CFGR_OTGFSPRE_BB (PERIPH_BB_BASE + (CFGR_OFFSET * 32) + (OTGFSPRE_BitNumber * 4)) -#endif /* STM32F10X_CL */ - -/* --- BDCR Register ---*/ - -/* Alias word address of RTCEN bit */ -#define BDCR_OFFSET (RCC_OFFSET + 0x20) -#define RTCEN_BitNumber 0x0F -#define BDCR_RTCEN_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (RTCEN_BitNumber * 4)) - -/* Alias word address of BDRST bit */ -#define BDRST_BitNumber 0x10 -#define BDCR_BDRST_BB (PERIPH_BB_BASE + (BDCR_OFFSET * 32) + (BDRST_BitNumber * 4)) - -/* --- CSR Register ---*/ - -/* Alias word address of LSION bit */ -#define CSR_OFFSET (RCC_OFFSET + 0x24) -#define LSION_BitNumber 0x00 -#define CSR_LSION_BB (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (LSION_BitNumber * 4)) - -#ifdef STM32F10X_CL -/* --- CFGR2 Register ---*/ - - /* Alias word address of I2S2SRC bit */ - #define CFGR2_OFFSET (RCC_OFFSET + 0x2C) - #define I2S2SRC_BitNumber 0x11 - #define CFGR2_I2S2SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S2SRC_BitNumber * 4)) - - /* Alias word address of I2S3SRC bit */ - #define I2S3SRC_BitNumber 0x12 - #define CFGR2_I2S3SRC_BB (PERIPH_BB_BASE + (CFGR2_OFFSET * 32) + (I2S3SRC_BitNumber * 4)) -#endif /* STM32F10X_CL */ - -/* ---------------------- RCC registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_HSEBYP_Reset ((uint32_t)0xFFFBFFFF) -#define CR_HSEBYP_Set ((uint32_t)0x00040000) -#define CR_HSEON_Reset ((uint32_t)0xFFFEFFFF) -#define CR_HSEON_Set ((uint32_t)0x00010000) -#define CR_HSITRIM_Mask ((uint32_t)0xFFFFFF07) - -/* CFGR register bit mask */ -#ifndef STM32F10X_CL - #define CFGR_PLL_Mask ((uint32_t)0xFFC0FFFF) -#else - #define CFGR_PLL_Mask ((uint32_t)0xFFC2FFFF) -#endif /* STM32F10X_CL */ - -#define CFGR_PLLMull_Mask ((uint32_t)0x003C0000) -#define CFGR_PLLSRC_Mask ((uint32_t)0x00010000) -#define CFGR_PLLXTPRE_Mask ((uint32_t)0x00020000) -#define CFGR_SWS_Mask ((uint32_t)0x0000000C) -#define CFGR_SW_Mask ((uint32_t)0xFFFFFFFC) -#define CFGR_HPRE_Reset_Mask ((uint32_t)0xFFFFFF0F) -#define CFGR_HPRE_Set_Mask ((uint32_t)0x000000F0) -#define CFGR_PPRE1_Reset_Mask ((uint32_t)0xFFFFF8FF) -#define CFGR_PPRE1_Set_Mask ((uint32_t)0x00000700) -#define CFGR_PPRE2_Reset_Mask ((uint32_t)0xFFFFC7FF) -#define CFGR_PPRE2_Set_Mask ((uint32_t)0x00003800) -#define CFGR_ADCPRE_Reset_Mask ((uint32_t)0xFFFF3FFF) -#define CFGR_ADCPRE_Set_Mask ((uint32_t)0x0000C000) - -/* CSR register bit mask */ -#define CSR_RMVF_Set ((uint32_t)0x01000000) - -#ifdef STM32F10X_CL -/* CFGR2 register bit mask */ - #define CFGR2_PREDIV1SRC ((uint32_t)0x00010000) - #define CFGR2_PREDIV1 ((uint32_t)0x0000000F) - #define CFGR2_PREDIV2 ((uint32_t)0x000000F0) - #define CFGR2_PLL2MUL ((uint32_t)0x00000F00) - #define CFGR2_PLL3MUL ((uint32_t)0x0000F000) -#endif /* STM32F10X_CL */ - -/* RCC Flag Mask */ -#define FLAG_Mask ((uint8_t)0x1F) - -#ifndef HSI_Value -/* Typical Value of the HSI in Hz */ - #define HSI_Value ((uint32_t)8000000) -#endif /* HSI_Value */ - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define CIR_BYTE2_ADDRESS ((uint32_t)0x40021009) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define CIR_BYTE3_ADDRESS ((uint32_t)0x4002100A) - -/* CFGR register byte 4 (Bits[31:24]) base address */ -#define CFGR_BYTE4_ADDRESS ((uint32_t)0x40021007) - -/* BDCR register base address */ -#define BDCR_ADDRESS (PERIPH_BASE + BDCR_OFFSET) - -#ifndef HSEStartUp_TimeOut -/* Time out for HSE start up */ - #define HSEStartUp_TimeOut ((uint16_t)0x0500) -#endif /* HSEStartUp_TimeOut */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Variables - * @{ - */ - -static __I uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9}; -static __I uint8_t ADCPrescTable[4] = {2, 4, 6, 8}; - -/** - * @} - */ - -/** @defgroup RCC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup RCC_Private_Functions - * @{ - */ - -/** - * @brief Resets the RCC clock configuration to the default reset state. - * @param None - * @retval None - */ -void RCC_DeInit(void) -{ - /* Set HSION bit */ - RCC->CR |= (uint32_t)0x00000001; - - /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ -#ifndef STM32F10X_CL - RCC->CFGR &= (uint32_t)0xF8FF0000; -#else - RCC->CFGR &= (uint32_t)0xF0FF0000; -#endif /* STM32F10X_CL */ - - /* Reset HSEON, CSSON and PLLON bits */ - RCC->CR &= (uint32_t)0xFEF6FFFF; - - /* Reset HSEBYP bit */ - RCC->CR &= (uint32_t)0xFFFBFFFF; - - /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ - RCC->CFGR &= (uint32_t)0xFF80FFFF; - -#ifndef STM32F10X_CL - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x009F0000; -#else - /* Reset PLL2ON and PLL3ON bits */ - RCC->CR &= (uint32_t)0xEBFFFFFF; - - /* Disable all interrupts and clear pending bits */ - RCC->CIR = 0x00FF0000; - - /* Reset CFGR2 register */ - RCC->CFGR2 = 0x00000000; -#endif /* STM32F10X_CL */ -} - -/** - * @brief Configures the External High Speed oscillator (HSE). - * @note HSE can not be stopped if it is used directly or through the PLL as system clock. - * @param RCC_HSE: specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: HSE oscillator OFF - * @arg RCC_HSE_ON: HSE oscillator ON - * @arg RCC_HSE_Bypass: HSE oscillator bypassed with external clock - * @retval None - */ -void RCC_HSEConfig(uint32_t RCC_HSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_HSE(RCC_HSE)); - /* Reset HSEON and HSEBYP bits before configuring the HSE ------------------*/ - /* Reset HSEON bit */ - RCC->CR &= CR_HSEON_Reset; - /* Reset HSEBYP bit */ - RCC->CR &= CR_HSEBYP_Reset; - /* Configure HSE (RCC_HSE_OFF is already covered by the code section above) */ - switch(RCC_HSE) - { - case RCC_HSE_ON: - /* Set HSEON bit */ - RCC->CR |= CR_HSEON_Set; - break; - - case RCC_HSE_Bypass: - /* Set HSEBYP and HSEON bits */ - RCC->CR |= CR_HSEBYP_Set | CR_HSEON_Set; - break; - - default: - break; - } -} - -/** - * @brief Waits for HSE start-up. - * @param None - * @retval An ErrorStatus enumuration value: - * - SUCCESS: HSE oscillator is stable and ready to use - * - ERROR: HSE oscillator not yet ready - */ -ErrorStatus RCC_WaitForHSEStartUp(void) -{ - __IO uint32_t StartUpCounter = 0; - ErrorStatus status = ERROR; - FlagStatus HSEStatus = RESET; - - /* Wait till HSE is ready and if Time out is reached exit */ - do - { - HSEStatus = RCC_GetFlagStatus(RCC_FLAG_HSERDY); - StartUpCounter++; - } while((StartUpCounter != HSEStartUp_TimeOut) && (HSEStatus == RESET)); - - if (RCC_GetFlagStatus(RCC_FLAG_HSERDY) != RESET) - { - status = SUCCESS; - } - else - { - status = ERROR; - } - return (status); -} - -/** - * @brief Adjusts the Internal High Speed oscillator (HSI) calibration value. - * @param HSICalibrationValue: specifies the calibration trimming value. - * This parameter must be a number between 0 and 0x1F. - * @retval None - */ -void RCC_AdjustHSICalibrationValue(uint8_t HSICalibrationValue) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_CALIBRATION_VALUE(HSICalibrationValue)); - tmpreg = RCC->CR; - /* Clear HSITRIM[4:0] bits */ - tmpreg &= CR_HSITRIM_Mask; - /* Set the HSITRIM[4:0] bits according to HSICalibrationValue value */ - tmpreg |= (uint32_t)HSICalibrationValue << 3; - /* Store the new value */ - RCC->CR = tmpreg; -} - -/** - * @brief Enables or disables the Internal High Speed oscillator (HSI). - * @note HSI can not be stopped if it is used directly or through the PLL as system clock. - * @param NewState: new state of the HSI. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_HSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_HSION_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the PLL clock source and multiplication factor. - * @note This function must be used only when the PLL is disabled. - * @param RCC_PLLSource: specifies the PLL entry clock source. - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry - * @arg RCC_PLLSource_PREDIV1: PREDIV1 clock selected as PLL clock entry - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_PLLSource_HSI_Div2: HSI oscillator clock divided by 2 selected as PLL clock entry - * @arg RCC_PLLSource_HSE_Div1: HSE oscillator clock selected as PLL clock entry - * @arg RCC_PLLSource_HSE_Div2: HSE oscillator clock divided by 2 selected as PLL clock entry - * @param RCC_PLLMul: specifies the PLL multiplication factor. - * For @b STM32_Connectivity_line_devices, this parameter can be RCC_PLLMul_x where x:{[4,9], 6_5} - * For @b other_STM32_devices, this parameter can be RCC_PLLMul_x where x:[2,16] - * @retval None - */ -void RCC_PLLConfig(uint32_t RCC_PLLSource, uint32_t RCC_PLLMul) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL_SOURCE(RCC_PLLSource)); - assert_param(IS_RCC_PLL_MUL(RCC_PLLMul)); - - tmpreg = RCC->CFGR; - /* Clear PLLSRC, PLLXTPRE and PLLMUL[3:0] bits */ - tmpreg &= CFGR_PLL_Mask; - /* Set the PLL configuration bits */ - tmpreg |= RCC_PLLSource | RCC_PLLMul; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Enables or disables the PLL. - * @note The PLL can not be disabled if it is used as system clock. - * @param NewState: new state of the PLL. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLLCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_PLLON_BB = (uint32_t)NewState; -} - -#ifdef STM32F10X_CL -/** - * @brief Configures the PREDIV1 division factor. - * @note - * - This function must be used only when the PLL is disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PREDIV1_Source: specifies the PREDIV1 clock source. - * This parameter can be one of the following values: - * @arg RCC_PREDIV1_Source_HSE: HSE selected as PREDIV1 clock - * @arg RCC_PREDIV1_Source_PLL2: PLL2 selected as PREDIV1 clock - * @param RCC_PREDIV1_Div: specifies the PREDIV1 clock division factor. - * This parameter can be RCC_PREDIV1_Divx where x:[1,16] - * @retval None - */ -void RCC_PREDIV1Config(uint32_t RCC_PREDIV1_Source, uint32_t RCC_PREDIV1_Div) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PREDIV1_SOURCE(RCC_PREDIV1_Source)); - assert_param(IS_RCC_PREDIV1(RCC_PREDIV1_Div)); - - tmpreg = RCC->CFGR2; - /* Clear PREDIV1[3:0] and PREDIV1SRC bits */ - tmpreg &= ~(CFGR2_PREDIV1 | CFGR2_PREDIV1SRC); - /* Set the PREDIV1 clock source and division factor */ - tmpreg |= RCC_PREDIV1_Source | RCC_PREDIV1_Div ; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - - -/** - * @brief Configures the PREDIV2 division factor. - * @note - * - This function must be used only when both PLL2 and PLL3 are disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PREDIV2_Div: specifies the PREDIV2 clock division factor. - * This parameter can be RCC_PREDIV2_Divx where x:[1,16] - * @retval None - */ -void RCC_PREDIV2Config(uint32_t RCC_PREDIV2_Div) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PREDIV2(RCC_PREDIV2_Div)); - - tmpreg = RCC->CFGR2; - /* Clear PREDIV2[3:0] bits */ - tmpreg &= ~CFGR2_PREDIV2; - /* Set the PREDIV2 division factor */ - tmpreg |= RCC_PREDIV2_Div; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - -/** - * @brief Configures the PLL2 multiplication factor. - * @note - * - This function must be used only when the PLL2 is disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PLL2Mul: specifies the PLL2 multiplication factor. - * This parameter can be RCC_PLL2Mul_x where x:{[8,14], 16, 20} - * @retval None - */ -void RCC_PLL2Config(uint32_t RCC_PLL2Mul) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL2_MUL(RCC_PLL2Mul)); - - tmpreg = RCC->CFGR2; - /* Clear PLL2Mul[3:0] bits */ - tmpreg &= ~CFGR2_PLL2MUL; - /* Set the PLL2 configuration bits */ - tmpreg |= RCC_PLL2Mul; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - - -/** - * @brief Enables or disables the PLL2. - * @note - * - The PLL2 can not be disabled if it is used indirectly as system clock - * (i.e. it is used as PLL clock entry that is used as System clock). - * - This function applies only to STM32 Connectivity line devices. - * @param NewState: new state of the PLL2. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLL2Cmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CR_PLL2ON_BB = (uint32_t)NewState; -} - - -/** - * @brief Configures the PLL3 multiplication factor. - * @note - * - This function must be used only when the PLL3 is disabled. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_PLL3Mul: specifies the PLL3 multiplication factor. - * This parameter can be RCC_PLL3Mul_x where x:{[8,14], 16, 20} - * @retval None - */ -void RCC_PLL3Config(uint32_t RCC_PLL3Mul) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_RCC_PLL3_MUL(RCC_PLL3Mul)); - - tmpreg = RCC->CFGR2; - /* Clear PLL3Mul[3:0] bits */ - tmpreg &= ~CFGR2_PLL3MUL; - /* Set the PLL3 configuration bits */ - tmpreg |= RCC_PLL3Mul; - /* Store the new value */ - RCC->CFGR2 = tmpreg; -} - - -/** - * @brief Enables or disables the PLL3. - * @note This function applies only to STM32 Connectivity line devices. - * @param NewState: new state of the PLL3. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_PLL3Cmd(FunctionalState NewState) -{ - /* Check the parameters */ - - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_PLL3ON_BB = (uint32_t)NewState; -} -#endif /* STM32F10X_CL */ - -/** - * @brief Configures the system clock (SYSCLK). - * @param RCC_SYSCLKSource: specifies the clock source used as system clock. - * This parameter can be one of the following values: - * @arg RCC_SYSCLKSource_HSI: HSI selected as system clock - * @arg RCC_SYSCLKSource_HSE: HSE selected as system clock - * @arg RCC_SYSCLKSource_PLLCLK: PLL selected as system clock - * @retval None - */ -void RCC_SYSCLKConfig(uint32_t RCC_SYSCLKSource) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_SYSCLK_SOURCE(RCC_SYSCLKSource)); - tmpreg = RCC->CFGR; - /* Clear SW[1:0] bits */ - tmpreg &= CFGR_SW_Mask; - /* Set SW[1:0] bits according to RCC_SYSCLKSource value */ - tmpreg |= RCC_SYSCLKSource; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Returns the clock source used as system clock. - * @param None - * @retval The clock source used as system clock. The returned value can - * be one of the following: - * - 0x00: HSI used as system clock - * - 0x04: HSE used as system clock - * - 0x08: PLL used as system clock - */ -uint8_t RCC_GetSYSCLKSource(void) -{ - return ((uint8_t)(RCC->CFGR & CFGR_SWS_Mask)); -} - -/** - * @brief Configures the AHB clock (HCLK). - * @param RCC_SYSCLK: defines the AHB clock divider. This clock is derived from - * the system clock (SYSCLK). - * This parameter can be one of the following values: - * @arg RCC_SYSCLK_Div1: AHB clock = SYSCLK - * @arg RCC_SYSCLK_Div2: AHB clock = SYSCLK/2 - * @arg RCC_SYSCLK_Div4: AHB clock = SYSCLK/4 - * @arg RCC_SYSCLK_Div8: AHB clock = SYSCLK/8 - * @arg RCC_SYSCLK_Div16: AHB clock = SYSCLK/16 - * @arg RCC_SYSCLK_Div64: AHB clock = SYSCLK/64 - * @arg RCC_SYSCLK_Div128: AHB clock = SYSCLK/128 - * @arg RCC_SYSCLK_Div256: AHB clock = SYSCLK/256 - * @arg RCC_SYSCLK_Div512: AHB clock = SYSCLK/512 - * @retval None - */ -void RCC_HCLKConfig(uint32_t RCC_SYSCLK) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_HCLK(RCC_SYSCLK)); - tmpreg = RCC->CFGR; - /* Clear HPRE[3:0] bits */ - tmpreg &= CFGR_HPRE_Reset_Mask; - /* Set HPRE[3:0] bits according to RCC_SYSCLK value */ - tmpreg |= RCC_SYSCLK; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Configures the Low Speed APB clock (PCLK1). - * @param RCC_HCLK: defines the APB1 clock divider. This clock is derived from - * the AHB clock (HCLK). - * This parameter can be one of the following values: - * @arg RCC_HCLK_Div1: APB1 clock = HCLK - * @arg RCC_HCLK_Div2: APB1 clock = HCLK/2 - * @arg RCC_HCLK_Div4: APB1 clock = HCLK/4 - * @arg RCC_HCLK_Div8: APB1 clock = HCLK/8 - * @arg RCC_HCLK_Div16: APB1 clock = HCLK/16 - * @retval None - */ -void RCC_PCLK1Config(uint32_t RCC_HCLK) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - tmpreg = RCC->CFGR; - /* Clear PPRE1[2:0] bits */ - tmpreg &= CFGR_PPRE1_Reset_Mask; - /* Set PPRE1[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Configures the High Speed APB clock (PCLK2). - * @param RCC_HCLK: defines the APB2 clock divider. This clock is derived from - * the AHB clock (HCLK). - * This parameter can be one of the following values: - * @arg RCC_HCLK_Div1: APB2 clock = HCLK - * @arg RCC_HCLK_Div2: APB2 clock = HCLK/2 - * @arg RCC_HCLK_Div4: APB2 clock = HCLK/4 - * @arg RCC_HCLK_Div8: APB2 clock = HCLK/8 - * @arg RCC_HCLK_Div16: APB2 clock = HCLK/16 - * @retval None - */ -void RCC_PCLK2Config(uint32_t RCC_HCLK) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_PCLK(RCC_HCLK)); - tmpreg = RCC->CFGR; - /* Clear PPRE2[2:0] bits */ - tmpreg &= CFGR_PPRE2_Reset_Mask; - /* Set PPRE2[2:0] bits according to RCC_HCLK value */ - tmpreg |= RCC_HCLK << 3; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -/** - * @brief Enables or disables the specified RCC interrupts. - * @param RCC_IT: specifies the RCC interrupt sources to be enabled or disabled. - * - * For @b STM32_Connectivity_line_devices, this parameter can be any combination - * of the following values - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt - * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt - * - * For @b other_STM32_devices, this parameter can be any combination of the - * following values - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * - * @param NewState: new state of the specified RCC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_ITConfig(uint8_t RCC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_IT(RCC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Perform Byte access to RCC_CIR bits to enable the selected interrupts */ - *(__IO uint8_t *) CIR_BYTE2_ADDRESS |= RCC_IT; - } - else - { - /* Perform Byte access to RCC_CIR bits to disable the selected interrupts */ - *(__IO uint8_t *) CIR_BYTE2_ADDRESS &= (uint8_t)~RCC_IT; - } -} - -#ifndef STM32F10X_CL -/** - * @brief Configures the USB clock (USBCLK). - * @param RCC_USBCLKSource: specifies the USB clock source. This clock is - * derived from the PLL output. - * This parameter can be one of the following values: - * @arg RCC_USBCLKSource_PLLCLK_1Div5: PLL clock divided by 1,5 selected as USB - * clock source - * @arg RCC_USBCLKSource_PLLCLK_Div1: PLL clock selected as USB clock source - * @retval None - */ -void RCC_USBCLKConfig(uint32_t RCC_USBCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_USBCLK_SOURCE(RCC_USBCLKSource)); - - *(__IO uint32_t *) CFGR_USBPRE_BB = RCC_USBCLKSource; -} -#else -/** - * @brief Configures the USB OTG FS clock (OTGFSCLK). - * This function applies only to STM32 Connectivity line devices. - * @param RCC_OTGFSCLKSource: specifies the USB OTG FS clock source. - * This clock is derived from the PLL output. - * This parameter can be one of the following values: - * @arg RCC_OTGFSCLKSource_PLLVCO_Div3: PLL VCO clock divided by 2 selected as USB OTG FS clock source - * @arg RCC_OTGFSCLKSource_PLLVCO_Div2: PLL VCO clock divided by 2 selected as USB OTG FS clock source - * @retval None - */ -void RCC_OTGFSCLKConfig(uint32_t RCC_OTGFSCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_OTGFSCLK_SOURCE(RCC_OTGFSCLKSource)); - - *(__IO uint32_t *) CFGR_OTGFSPRE_BB = RCC_OTGFSCLKSource; -} -#endif /* STM32F10X_CL */ - -/** - * @brief Configures the ADC clock (ADCCLK). - * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from - * the APB2 clock (PCLK2). - * This parameter can be one of the following values: - * @arg RCC_PCLK2_Div2: ADC clock = PCLK2/2 - * @arg RCC_PCLK2_Div4: ADC clock = PCLK2/4 - * @arg RCC_PCLK2_Div6: ADC clock = PCLK2/6 - * @arg RCC_PCLK2_Div8: ADC clock = PCLK2/8 - * @retval None - */ -void RCC_ADCCLKConfig(uint32_t RCC_PCLK2) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_RCC_ADCCLK(RCC_PCLK2)); - tmpreg = RCC->CFGR; - /* Clear ADCPRE[1:0] bits */ - tmpreg &= CFGR_ADCPRE_Reset_Mask; - /* Set ADCPRE[1:0] bits according to RCC_PCLK2 value */ - tmpreg |= RCC_PCLK2; - /* Store the new value */ - RCC->CFGR = tmpreg; -} - -#ifdef STM32F10X_CL -/** - * @brief Configures the I2S2 clock source(I2S2CLK). - * @note - * - This function must be called before enabling I2S2 APB clock. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_I2S2CLKSource: specifies the I2S2 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2S2CLKSource_SYSCLK: system clock selected as I2S2 clock entry - * @arg RCC_I2S2CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S2 clock entry - * @retval None - */ -void RCC_I2S2CLKConfig(uint32_t RCC_I2S2CLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_I2S2CLK_SOURCE(RCC_I2S2CLKSource)); - - *(__IO uint32_t *) CFGR2_I2S2SRC_BB = RCC_I2S2CLKSource; -} - -/** - * @brief Configures the I2S3 clock source(I2S2CLK). - * @note - * - This function must be called before enabling I2S3 APB clock. - * - This function applies only to STM32 Connectivity line devices. - * @param RCC_I2S3CLKSource: specifies the I2S3 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2S3CLKSource_SYSCLK: system clock selected as I2S3 clock entry - * @arg RCC_I2S3CLKSource_PLL3_VCO: PLL3 VCO clock selected as I2S3 clock entry - * @retval None - */ -void RCC_I2S3CLKConfig(uint32_t RCC_I2S3CLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_I2S3CLK_SOURCE(RCC_I2S3CLKSource)); - - *(__IO uint32_t *) CFGR2_I2S3SRC_BB = RCC_I2S3CLKSource; -} -#endif /* STM32F10X_CL */ - -/** - * @brief Configures the External Low Speed oscillator (LSE). - * @param RCC_LSE: specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: LSE oscillator OFF - * @arg RCC_LSE_ON: LSE oscillator ON - * @arg RCC_LSE_Bypass: LSE oscillator bypassed with external clock - * @retval None - */ -void RCC_LSEConfig(uint8_t RCC_LSE) -{ - /* Check the parameters */ - assert_param(IS_RCC_LSE(RCC_LSE)); - /* Reset LSEON and LSEBYP bits before configuring the LSE ------------------*/ - /* Reset LSEON bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; - /* Reset LSEBYP bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_OFF; - /* Configure LSE (RCC_LSE_OFF is already covered by the code section above) */ - switch(RCC_LSE) - { - case RCC_LSE_ON: - /* Set LSEON bit */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_ON; - break; - - case RCC_LSE_Bypass: - /* Set LSEBYP and LSEON bits */ - *(__IO uint8_t *) BDCR_ADDRESS = RCC_LSE_Bypass | RCC_LSE_ON; - break; - - default: - break; - } -} - -/** - * @brief Enables or disables the Internal Low Speed oscillator (LSI). - * @note LSI can not be disabled if the IWDG is running. - * @param NewState: new state of the LSI. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_LSICmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CSR_LSION_BB = (uint32_t)NewState; -} - -/** - * @brief Configures the RTC clock (RTCCLK). - * @note Once the RTC clock is selected it can’t be changed unless the Backup domain is reset. - * @param RCC_RTCCLKSource: specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg RCC_RTCCLKSource_LSE: LSE selected as RTC clock - * @arg RCC_RTCCLKSource_LSI: LSI selected as RTC clock - * @arg RCC_RTCCLKSource_HSE_Div128: HSE clock divided by 128 selected as RTC clock - * @retval None - */ -void RCC_RTCCLKConfig(uint32_t RCC_RTCCLKSource) -{ - /* Check the parameters */ - assert_param(IS_RCC_RTCCLK_SOURCE(RCC_RTCCLKSource)); - /* Select the RTC clock source */ - RCC->BDCR |= RCC_RTCCLKSource; -} - -/** - * @brief Enables or disables the RTC clock. - * @note This function must be used only after the RTC clock was selected using the RCC_RTCCLKConfig function. - * @param NewState: new state of the RTC clock. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_RTCCLKCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) BDCR_RTCEN_BB = (uint32_t)NewState; -} - -/** - * @brief Returns the frequencies of different on chip clocks. - * @param RCC_Clocks: pointer to a RCC_ClocksTypeDef structure which will hold - * the clocks frequencies. - * @retval None - */ -void RCC_GetClocksFreq(RCC_ClocksTypeDef* RCC_Clocks) -{ - uint32_t tmp = 0, pllmull = 0, pllsource = 0, presc = 0; - -#ifdef STM32F10X_CL - uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; -#endif /* STM32F10X_CL */ - - /* Get SYSCLK source -------------------------------------------------------*/ - tmp = RCC->CFGR & CFGR_SWS_Mask; - - switch (tmp) - { - case 0x00: /* HSI used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSI_Value; - break; - case 0x04: /* HSE used as system clock */ - RCC_Clocks->SYSCLK_Frequency = HSE_Value; - break; - case 0x08: /* PLL used as system clock */ - - /* Get PLL clock source and multiplication factor ----------------------*/ - pllmull = RCC->CFGR & CFGR_PLLMull_Mask; - pllsource = RCC->CFGR & CFGR_PLLSRC_Mask; - -#ifndef STM32F10X_CL - pllmull = ( pllmull >> 18) + 2; - - if (pllsource == 0x00) - {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSI_Value >> 1) * pllmull; - } - else - {/* HSE selected as PLL clock entry */ - if ((RCC->CFGR & CFGR_PLLXTPRE_Mask) != (uint32_t)RESET) - {/* HSE oscillator clock divided by 2 */ - RCC_Clocks->SYSCLK_Frequency = (HSE_Value >> 1) * pllmull; - } - else - { - RCC_Clocks->SYSCLK_Frequency = HSE_Value * pllmull; - } - } -#else - pllmull = pllmull >> 18; - - if (pllmull != 0x0D) - { - pllmull += 2; - } - else - { /* PLL multiplication factor = PLL input clock * 6.5 */ - pllmull = 13 / 2; - } - - if (pllsource == 0x00) - {/* HSI oscillator clock divided by 2 selected as PLL clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSI_Value >> 1) * pllmull; - } - else - {/* PREDIV1 selected as PLL clock entry */ - - /* Get PREDIV1 clock source and division factor */ - prediv1source = RCC->CFGR2 & CFGR2_PREDIV1SRC; - prediv1factor = (RCC->CFGR2 & CFGR2_PREDIV1) + 1; - - if (prediv1source == 0) - { /* HSE oscillator clock selected as PREDIV1 clock entry */ - RCC_Clocks->SYSCLK_Frequency = (HSE_Value / prediv1factor) * pllmull; - } - else - {/* PLL2 clock selected as PREDIV1 clock entry */ - - /* Get PREDIV2 division factor and PLL2 multiplication factor */ - prediv2factor = ((RCC->CFGR2 & CFGR2_PREDIV2) >> 4) + 1; - pll2mull = ((RCC->CFGR2 & CFGR2_PLL2MUL) >> 8 ) + 2; - RCC_Clocks->SYSCLK_Frequency = (((HSE_Value / prediv2factor) * pll2mull) / prediv1factor) * pllmull; - } - } -#endif /* STM32F10X_CL */ - break; - - default: - RCC_Clocks->SYSCLK_Frequency = HSI_Value; - break; - } - - /* Compute HCLK, PCLK1, PCLK2 and ADCCLK clocks frequencies ----------------*/ - /* Get HCLK prescaler */ - tmp = RCC->CFGR & CFGR_HPRE_Set_Mask; - tmp = tmp >> 4; - presc = APBAHBPrescTable[tmp]; - /* HCLK clock frequency */ - RCC_Clocks->HCLK_Frequency = RCC_Clocks->SYSCLK_Frequency >> presc; - /* Get PCLK1 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE1_Set_Mask; - tmp = tmp >> 8; - presc = APBAHBPrescTable[tmp]; - /* PCLK1 clock frequency */ - RCC_Clocks->PCLK1_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - /* Get PCLK2 prescaler */ - tmp = RCC->CFGR & CFGR_PPRE2_Set_Mask; - tmp = tmp >> 11; - presc = APBAHBPrescTable[tmp]; - /* PCLK2 clock frequency */ - RCC_Clocks->PCLK2_Frequency = RCC_Clocks->HCLK_Frequency >> presc; - /* Get ADCCLK prescaler */ - tmp = RCC->CFGR & CFGR_ADCPRE_Set_Mask; - tmp = tmp >> 14; - presc = ADCPrescTable[tmp]; - /* ADCCLK clock frequency */ - RCC_Clocks->ADCCLK_Frequency = RCC_Clocks->PCLK2_Frequency / presc; -} - -/** - * @brief Enables or disables the AHB peripheral clock. - * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. - * - * For @b STM32_Connectivity_line_devices, this parameter can be any combination - * of the following values: - * @arg RCC_AHBPeriph_DMA1 - * @arg RCC_AHBPeriph_DMA2 - * @arg RCC_AHBPeriph_SRAM - * @arg RCC_AHBPeriph_FLITF - * @arg RCC_AHBPeriph_CRC - * @arg RCC_AHBPeriph_OTG_FS - * @arg RCC_AHBPeriph_ETH_MAC - * @arg RCC_AHBPeriph_ETH_MAC_Tx - * @arg RCC_AHBPeriph_ETH_MAC_Rx - * - * For @b other_STM32_devices, this parameter can be any combination of the - * following values: - * @arg RCC_AHBPeriph_DMA1 - * @arg RCC_AHBPeriph_DMA2 - * @arg RCC_AHBPeriph_SRAM - * @arg RCC_AHBPeriph_FLITF - * @arg RCC_AHBPeriph_CRC - * @arg RCC_AHBPeriph_FSMC - * @arg RCC_AHBPeriph_SDIO - * - * @note SRAM and FLITF clock can be disabled only during sleep mode. - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHBPeriphClockCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB_PERIPH(RCC_AHBPeriph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHBENR |= RCC_AHBPeriph; - } - else - { - RCC->AHBENR &= ~RCC_AHBPeriph; - } -} - -/** - * @brief Enables or disables the High Speed APB (APB2) peripheral clock. - * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, - * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, - * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, - * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, - * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3 - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphClockCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB2ENR |= RCC_APB2Periph; - } - else - { - RCC->APB2ENR &= ~RCC_APB2Periph; - } -} - -/** - * @brief Enables or disables the Low Speed APB (APB1) peripheral clock. - * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, - * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, - * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, - * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, - * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, - * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, - * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphClockCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB1ENR |= RCC_APB1Periph; - } - else - { - RCC->APB1ENR &= ~RCC_APB1Periph; - } -} - -#ifdef STM32F10X_CL -/** - * @brief Forces or releases AHB peripheral reset. - * @note This function applies only to STM32 Connectivity line devices. - * @param RCC_AHBPeriph: specifies the AHB peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_AHBPeriph_OTG_FS - * @arg RCC_AHBPeriph_ETH_MAC - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_AHBPeriphResetCmd(uint32_t RCC_AHBPeriph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_AHB_PERIPH_RESET(RCC_AHBPeriph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RCC->AHBRSTR |= RCC_AHBPeriph; - } - else - { - RCC->AHBRSTR &= ~RCC_AHBPeriph; - } -} -#endif /* STM32F10X_CL */ - -/** - * @brief Forces or releases High Speed APB (APB2) peripheral reset. - * @param RCC_APB2Periph: specifies the APB2 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_APB2Periph_AFIO, RCC_APB2Periph_GPIOA, RCC_APB2Periph_GPIOB, - * RCC_APB2Periph_GPIOC, RCC_APB2Periph_GPIOD, RCC_APB2Periph_GPIOE, - * RCC_APB2Periph_GPIOF, RCC_APB2Periph_GPIOG, RCC_APB2Periph_ADC1, - * RCC_APB2Periph_ADC2, RCC_APB2Periph_TIM1, RCC_APB2Periph_SPI1, - * RCC_APB2Periph_TIM8, RCC_APB2Periph_USART1, RCC_APB2Periph_ADC3 - * @param NewState: new state of the specified peripheral reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB2PeriphResetCmd(uint32_t RCC_APB2Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB2_PERIPH(RCC_APB2Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB2RSTR |= RCC_APB2Periph; - } - else - { - RCC->APB2RSTR &= ~RCC_APB2Periph; - } -} - -/** - * @brief Forces or releases Low Speed APB (APB1) peripheral reset. - * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. - * This parameter can be any combination of the following values: - * @arg RCC_APB1Periph_TIM2, RCC_APB1Periph_TIM3, RCC_APB1Periph_TIM4, - * RCC_APB1Periph_TIM5, RCC_APB1Periph_TIM6, RCC_APB1Periph_TIM7, - * RCC_APB1Periph_WWDG, RCC_APB1Periph_SPI2, RCC_APB1Periph_SPI3, - * RCC_APB1Periph_USART2, RCC_APB1Periph_USART3, RCC_APB1Periph_USART4, - * RCC_APB1Periph_USART5, RCC_APB1Periph_I2C1, RCC_APB1Periph_I2C2, - * RCC_APB1Periph_USB, RCC_APB1Periph_CAN1, RCC_APB1Periph_BKP, - * RCC_APB1Periph_PWR, RCC_APB1Periph_DAC - * @param NewState: new state of the specified peripheral clock. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_APB1PeriphResetCmd(uint32_t RCC_APB1Periph, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RCC_APB1_PERIPH(RCC_APB1Periph)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - RCC->APB1RSTR |= RCC_APB1Periph; - } - else - { - RCC->APB1RSTR &= ~RCC_APB1Periph; - } -} - -/** - * @brief Forces or releases the Backup domain reset. - * @param NewState: new state of the Backup domain reset. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_BackupResetCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) BDCR_BDRST_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the Clock Security System. - * @param NewState: new state of the Clock Security System.. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RCC_ClockSecuritySystemCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - *(__IO uint32_t *) CR_CSSON_BB = (uint32_t)NewState; -} - -/** - * @brief Selects the clock source to output on MCO pin. - * @param RCC_MCO: specifies the clock source to output. - * - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_MCO_NoClock: No clock selected - * @arg RCC_MCO_SYSCLK: System clock selected - * @arg RCC_MCO_HSI: HSI oscillator clock selected - * @arg RCC_MCO_HSE: HSE oscillator clock selected - * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected - * @arg RCC_MCO_PLL2CLK: PLL2 clock selected - * @arg RCC_MCO_PLL3CLK_Div2: PLL3 clock divided by 2 selected - * @arg RCC_MCO_XT1: External 3-25 MHz oscillator clock selected - * @arg RCC_MCO_PLL3CLK: PLL3 clock selected - * - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_MCO_NoClock: No clock selected - * @arg RCC_MCO_SYSCLK: System clock selected - * @arg RCC_MCO_HSI: HSI oscillator clock selected - * @arg RCC_MCO_HSE: HSE oscillator clock selected - * @arg RCC_MCO_PLLCLK_Div2: PLL clock divided by 2 selected - * - * @retval None - */ -void RCC_MCOConfig(uint8_t RCC_MCO) -{ - /* Check the parameters */ - assert_param(IS_RCC_MCO(RCC_MCO)); - - /* Perform Byte access to MCO bits to select the MCO source */ - *(__IO uint8_t *) CFGR_BYTE4_ADDRESS = RCC_MCO; -} - -/** - * @brief Checks whether the specified RCC flag is set or not. - * @param RCC_FLAG: specifies the flag to check. - * - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready - * @arg RCC_FLAG_PLLRDY: PLL clock ready - * @arg RCC_FLAG_PLL2RDY: PLL2 clock ready - * @arg RCC_FLAG_PLL3RDY: PLL3 clock ready - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready - * @arg RCC_FLAG_PINRST: Pin reset - * @arg RCC_FLAG_PORRST: POR/PDR reset - * @arg RCC_FLAG_SFTRST: Software reset - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset - * @arg RCC_FLAG_LPWRRST: Low Power reset - * - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready - * @arg RCC_FLAG_PLLRDY: PLL clock ready - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready - * @arg RCC_FLAG_PINRST: Pin reset - * @arg RCC_FLAG_PORRST: POR/PDR reset - * @arg RCC_FLAG_SFTRST: Software reset - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset - * @arg RCC_FLAG_LPWRRST: Low Power reset - * - * @retval The new state of RCC_FLAG (SET or RESET). - */ -FlagStatus RCC_GetFlagStatus(uint8_t RCC_FLAG) -{ - uint32_t tmp = 0; - uint32_t statusreg = 0; - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RCC_FLAG(RCC_FLAG)); - - /* Get the RCC register index */ - tmp = RCC_FLAG >> 5; - if (tmp == 1) /* The flag to check is in CR register */ - { - statusreg = RCC->CR; - } - else if (tmp == 2) /* The flag to check is in BDCR register */ - { - statusreg = RCC->BDCR; - } - else /* The flag to check is in CSR register */ - { - statusreg = RCC->CSR; - } - - /* Get the flag position */ - tmp = RCC_FLAG & FLAG_Mask; - if ((statusreg & ((uint32_t)1 << tmp)) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the flag status */ - return bitstatus; -} - -/** - * @brief Clears the RCC reset flags. - * @note The reset flags are: RCC_FLAG_PINRST, RCC_FLAG_PORRST, RCC_FLAG_SFTRST, - * RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST, RCC_FLAG_LPWRRST - * @param None - * @retval None - */ -void RCC_ClearFlag(void) -{ - /* Set RMVF bit to clear the reset flags */ - RCC->CSR |= CSR_RMVF_Set; -} - -/** - * @brief Checks whether the specified RCC interrupt has occurred or not. - * @param RCC_IT: specifies the RCC interrupt source to check. - * - * For @b STM32_Connectivity_line_devices, this parameter can be one of the - * following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt - * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt - * @arg RCC_IT_CSS: Clock Security System interrupt - * - * For @b other_STM32_devices, this parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_CSS: Clock Security System interrupt - * - * @retval The new state of RCC_IT (SET or RESET). - */ -ITStatus RCC_GetITStatus(uint8_t RCC_IT) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RCC_GET_IT(RCC_IT)); - - /* Check the status of the specified RCC interrupt */ - if ((RCC->CIR & RCC_IT) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - /* Return the RCC_IT status */ - return bitstatus; -} - -/** - * @brief Clears the RCC’s interrupt pending bits. - * @param RCC_IT: specifies the interrupt pending bit to clear. - * - * For @b STM32_Connectivity_line_devices, this parameter can be any combination - * of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * @arg RCC_IT_PLL2RDY: PLL2 ready interrupt - * @arg RCC_IT_PLL3RDY: PLL3 ready interrupt - * @arg RCC_IT_CSS: Clock Security System interrupt - * - * For @b other_STM32_devices, this parameter can be any combination of the - * following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt - * @arg RCC_IT_LSERDY: LSE ready interrupt - * @arg RCC_IT_HSIRDY: HSI ready interrupt - * @arg RCC_IT_HSERDY: HSE ready interrupt - * @arg RCC_IT_PLLRDY: PLL ready interrupt - * - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval None - */ -void RCC_ClearITPendingBit(uint8_t RCC_IT) -{ - /* Check the parameters */ - assert_param(IS_RCC_CLEAR_IT(RCC_IT)); - - /* Perform Byte access to RCC_CIR[23:16] bits to clear the selected interrupt - pending bits */ - *(__IO uint8_t *) CIR_BYTE3_ADDRESS = RCC_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c deleted file mode 100644 index 0118b7a0d..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_rtc.c +++ /dev/null @@ -1,341 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_rtc.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the RTC firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_rtc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup RTC - * @brief RTC driver modules - * @{ - */ - -/** @defgroup RTC_Private_TypesDefinitions - * @{ - */ -/** - * @} - */ - -/** @defgroup RTC_Private_Defines - * @{ - */ - -#define CRL_CNF_Set ((uint16_t)0x0010) /*!< Configuration Flag Enable Mask */ -#define CRL_CNF_Reset ((uint16_t)0xFFEF) /*!< Configuration Flag Disable Mask */ -#define RTC_LSB_Mask ((uint32_t)0x0000FFFF) /*!< RTC LSB Mask */ -#define PRLH_MSB_Mask ((uint32_t)0x000F0000) /*!< RTC Prescaler MSB Mask */ - -/** - * @} - */ - -/** @defgroup RTC_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup RTC_Private_Functions - * @{ - */ - -/** - * @brief Enables or disables the specified RTC interrupts. - * @param RTC_IT: specifies the RTC interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_OW: Overflow interrupt - * @arg RTC_IT_ALR: Alarm interrupt - * @arg RTC_IT_SEC: Second interrupt - * @param NewState: new state of the specified RTC interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void RTC_ITConfig(uint16_t RTC_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - RTC->CRH |= RTC_IT; - } - else - { - RTC->CRH &= (uint16_t)~RTC_IT; - } -} - -/** - * @brief Enters the RTC configuration mode. - * @param None - * @retval None - */ -void RTC_EnterConfigMode(void) -{ - /* Set the CNF flag to enter in the Configuration Mode */ - RTC->CRL |= CRL_CNF_Set; -} - -/** - * @brief Exits from the RTC configuration mode. - * @param None - * @retval None - */ -void RTC_ExitConfigMode(void) -{ - /* Reset the CNF flag to exit from the Configuration Mode */ - RTC->CRL &= CRL_CNF_Reset; -} - -/** - * @brief Gets the RTC counter value. - * @param None - * @retval RTC counter value. - */ -uint32_t RTC_GetCounter(void) -{ - uint16_t tmp = 0; - tmp = RTC->CNTL; - return (((uint32_t)RTC->CNTH << 16 ) | tmp) ; -} - -/** - * @brief Sets the RTC counter value. - * @param CounterValue: RTC counter new value. - * @retval None - */ -void RTC_SetCounter(uint32_t CounterValue) -{ - RTC_EnterConfigMode(); - /* Set RTC COUNTER MSB word */ - RTC->CNTH = CounterValue >> 16; - /* Set RTC COUNTER LSB word */ - RTC->CNTL = (CounterValue & RTC_LSB_Mask); - RTC_ExitConfigMode(); -} - -/** - * @brief Sets the RTC prescaler value. - * @param PrescalerValue: RTC prescaler new value. - * @retval None - */ -void RTC_SetPrescaler(uint32_t PrescalerValue) -{ - /* Check the parameters */ - assert_param(IS_RTC_PRESCALER(PrescalerValue)); - - RTC_EnterConfigMode(); - /* Set RTC PRESCALER MSB word */ - RTC->PRLH = (PrescalerValue & PRLH_MSB_Mask) >> 16; - /* Set RTC PRESCALER LSB word */ - RTC->PRLL = (PrescalerValue & RTC_LSB_Mask); - RTC_ExitConfigMode(); -} - -/** - * @brief Sets the RTC alarm value. - * @param AlarmValue: RTC alarm new value. - * @retval None - */ -void RTC_SetAlarm(uint32_t AlarmValue) -{ - RTC_EnterConfigMode(); - /* Set the ALARM MSB word */ - RTC->ALRH = AlarmValue >> 16; - /* Set the ALARM LSB word */ - RTC->ALRL = (AlarmValue & RTC_LSB_Mask); - RTC_ExitConfigMode(); -} - -/** - * @brief Gets the RTC divider value. - * @param None - * @retval RTC Divider value. - */ -uint32_t RTC_GetDivider(void) -{ - uint32_t tmp = 0x00; - tmp = ((uint32_t)RTC->DIVH & (uint32_t)0x000F) << 16; - tmp |= RTC->DIVL; - return tmp; -} - -/** - * @brief Waits until last write operation on RTC registers has finished. - * @note This function must be called before any write to RTC registers. - * @param None - * @retval None - */ -void RTC_WaitForLastTask(void) -{ - /* Loop until RTOFF flag is set */ - while ((RTC->CRL & RTC_FLAG_RTOFF) == (uint16_t)RESET) - { - } -} - -/** - * @brief Waits until the RTC registers (RTC_CNT, RTC_ALR and RTC_PRL) - * are synchronized with RTC APB clock. - * @note This function must be called before any read operation after an APB reset - * or an APB clock stop. - * @param None - * @retval None - */ -void RTC_WaitForSynchro(void) -{ - /* Clear RSF flag */ - RTC->CRL &= (uint16_t)~RTC_FLAG_RSF; - /* Loop until RSF flag is set */ - while ((RTC->CRL & RTC_FLAG_RSF) == (uint16_t)RESET) - { - } -} - -/** - * @brief Checks whether the specified RTC flag is set or not. - * @param RTC_FLAG: specifies the flag to check. - * This parameter can be one the following values: - * @arg RTC_FLAG_RTOFF: RTC Operation OFF flag - * @arg RTC_FLAG_RSF: Registers Synchronized flag - * @arg RTC_FLAG_OW: Overflow flag - * @arg RTC_FLAG_ALR: Alarm flag - * @arg RTC_FLAG_SEC: Second flag - * @retval The new state of RTC_FLAG (SET or RESET). - */ -FlagStatus RTC_GetFlagStatus(uint16_t RTC_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_RTC_GET_FLAG(RTC_FLAG)); - - if ((RTC->CRL & RTC_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the RTC’s pending flags. - * @param RTC_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg RTC_FLAG_RSF: Registers Synchronized flag. This flag is cleared only after - * an APB reset or an APB Clock stop. - * @arg RTC_FLAG_OW: Overflow flag - * @arg RTC_FLAG_ALR: Alarm flag - * @arg RTC_FLAG_SEC: Second flag - * @retval None - */ -void RTC_ClearFlag(uint16_t RTC_FLAG) -{ - /* Check the parameters */ - assert_param(IS_RTC_CLEAR_FLAG(RTC_FLAG)); - - /* Clear the coressponding RTC flag */ - RTC->CRL &= (uint16_t)~RTC_FLAG; -} - -/** - * @brief Checks whether the specified RTC interrupt has occured or not. - * @param RTC_IT: specifies the RTC interrupts sources to check. - * This parameter can be one of the following values: - * @arg RTC_IT_OW: Overflow interrupt - * @arg RTC_IT_ALR: Alarm interrupt - * @arg RTC_IT_SEC: Second interrupt - * @retval The new state of the RTC_IT (SET or RESET). - */ -ITStatus RTC_GetITStatus(uint16_t RTC_IT) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_RTC_GET_IT(RTC_IT)); - - bitstatus = (ITStatus)(RTC->CRL & RTC_IT); - if (((RTC->CRH & RTC_IT) != (uint16_t)RESET) && (bitstatus != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the RTC’s interrupt pending bits. - * @param RTC_IT: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RTC_IT_OW: Overflow interrupt - * @arg RTC_IT_ALR: Alarm interrupt - * @arg RTC_IT_SEC: Second interrupt - * @retval None - */ -void RTC_ClearITPendingBit(uint16_t RTC_IT) -{ - /* Check the parameters */ - assert_param(IS_RTC_IT(RTC_IT)); - - /* Clear the coressponding RTC pending bit */ - RTC->CRL &= (uint16_t)~RTC_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c deleted file mode 100644 index c4b32a1af..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_sdio.c +++ /dev/null @@ -1,798 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_sdio.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the SDIO firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_sdio.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup SDIO - * @brief SDIO driver modules - * @{ - */ - -/** @defgroup SDIO_Private_TypesDefinitions - * @{ - */ - -/* ------------ SDIO registers bit address in the alias region ----------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ - -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) -#define CLKEN_BitNumber 0x08 -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BitNumber * 4)) - -/* --- CMD Register ---*/ - -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0C) -#define SDIOSUSPEND_BitNumber 0x0B -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BitNumber * 4)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BitNumber 0x0C -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BitNumber * 4)) - -/* Alias word address of NIEN bit */ -#define NIEN_BitNumber 0x0D -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BitNumber * 4)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BitNumber 0x0E -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BitNumber * 4)) - -/* --- DCTRL Register ---*/ - -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) -#define DMAEN_BitNumber 0x03 -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BitNumber * 4)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BitNumber 0x08 -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BitNumber * 4)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BitNumber 0x09 -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BitNumber * 4)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BitNumber 0x0A -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BitNumber * 4)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BitNumber 0x0B -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BitNumber * 4)) - -/* ---------------------- SDIO registers bit mask ------------------------ */ - -/* --- CLKCR Register ---*/ - -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((uint32_t)0xFFFF8100) - -/* --- PWRCTRL Register ---*/ - -/* SDIO PWRCTRL Mask */ -#define PWR_PWRCTRL_MASK ((uint32_t)0xFFFFFFFC) - -/* --- DCTRL Register ---*/ - -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((uint32_t)0xFFFFFF08) - -/* --- CMD Register ---*/ - -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((uint32_t)0xFFFFF800) - -/* SDIO RESP Registers Address */ -#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) - -/** - * @} - */ - -/** @defgroup SDIO_Private_Defines - * @{ - */ - -/** - * @} - */ - -/** @defgroup SDIO_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SDIO_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup SDIO_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup SDIO_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the SDIO peripheral registers to their default reset values. - * @param None - * @retval None - */ -void SDIO_DeInit(void) -{ - SDIO->POWER = 0x00000000; - SDIO->CLKCR = 0x00000000; - SDIO->ARG = 0x00000000; - SDIO->CMD = 0x00000000; - SDIO->DTIMER = 0x00000000; - SDIO->DLEN = 0x00000000; - SDIO->DCTRL = 0x00000000; - SDIO->ICR = 0x00C007FF; - SDIO->MASK = 0x00000000; -} - -/** - * @brief Initializes the SDIO peripheral according to the specified - * parameters in the SDIO_InitStruct. - * @param SDIO_InitStruct : pointer to a SDIO_InitTypeDef structure - * that contains the configuration information for the SDIO peripheral. - * @retval None - */ -void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CLOCK_EDGE(SDIO_InitStruct->SDIO_ClockEdge)); - assert_param(IS_SDIO_CLOCK_BYPASS(SDIO_InitStruct->SDIO_ClockBypass)); - assert_param(IS_SDIO_CLOCK_POWER_SAVE(SDIO_InitStruct->SDIO_ClockPowerSave)); - assert_param(IS_SDIO_BUS_WIDE(SDIO_InitStruct->SDIO_BusWide)); - assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(SDIO_InitStruct->SDIO_HardwareFlowControl)); - -/*---------------------------- SDIO CLKCR Configuration ------------------------*/ - /* Get the SDIO CLKCR value */ - tmpreg = SDIO->CLKCR; - - /* Clear CLKDIV, PWRSAV, BYPASS, WIDBUS, NEGEDGE, HWFC_EN bits */ - tmpreg &= CLKCR_CLEAR_MASK; - - /* Set CLKDIV bits according to SDIO_ClockDiv value */ - /* Set PWRSAV bit according to SDIO_ClockPowerSave value */ - /* Set BYPASS bit according to SDIO_ClockBypass value */ - /* Set WIDBUS bits according to SDIO_BusWide value */ - /* Set NEGEDGE bits according to SDIO_ClockEdge value */ - /* Set HWFC_EN bits according to SDIO_HardwareFlowControl value */ - tmpreg |= (SDIO_InitStruct->SDIO_ClockDiv | SDIO_InitStruct->SDIO_ClockPowerSave | - SDIO_InitStruct->SDIO_ClockBypass | SDIO_InitStruct->SDIO_BusWide | - SDIO_InitStruct->SDIO_ClockEdge | SDIO_InitStruct->SDIO_HardwareFlowControl); - - /* Write to SDIO CLKCR */ - SDIO->CLKCR = tmpreg; -} - -/** - * @brief Fills each SDIO_InitStruct member with its default value. - * @param SDIO_InitStruct: pointer to an SDIO_InitTypeDef structure which - * will be initialized. - * @retval None - */ -void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct) -{ - /* SDIO_InitStruct members default value */ - SDIO_InitStruct->SDIO_ClockDiv = 0x00; - SDIO_InitStruct->SDIO_ClockEdge = SDIO_ClockEdge_Rising; - SDIO_InitStruct->SDIO_ClockBypass = SDIO_ClockBypass_Disable; - SDIO_InitStruct->SDIO_ClockPowerSave = SDIO_ClockPowerSave_Disable; - SDIO_InitStruct->SDIO_BusWide = SDIO_BusWide_1b; - SDIO_InitStruct->SDIO_HardwareFlowControl = SDIO_HardwareFlowControl_Disable; -} - -/** - * @brief Enables or disables the SDIO Clock. - * @param NewState: new state of the SDIO Clock. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_ClockCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CLKCR_CLKEN_BB = (uint32_t)NewState; -} - -/** - * @brief Sets the power status of the controller. - * @param SDIO_PowerState: new state of the Power state. - * This parameter can be one of the following values: - * @arg SDIO_PowerState_OFF - * @arg SDIO_PowerState_ON - * @retval None - */ -void SDIO_SetPowerState(uint32_t SDIO_PowerState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_POWER_STATE(SDIO_PowerState)); - - SDIO->POWER &= PWR_PWRCTRL_MASK; - SDIO->POWER |= SDIO_PowerState; -} - -/** - * @brief Gets the power status of the controller. - * @param None - * @retval Power status of the controller. The returned value can - * be one of the following: - * - 0x00: Power OFF - * - 0x02: Power UP - * - 0x03: Power ON - */ -uint32_t SDIO_GetPowerState(void) -{ - return (SDIO->POWER & (~PWR_PWRCTRL_MASK)); -} - -/** - * @brief Enables or disables the SDIO interrupts. - * @param SDIO_IT: specifies the SDIO interrupt sources to be enabled or disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @param NewState: new state of the specified SDIO interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SDIO_IT(SDIO_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the SDIO interrupts */ - SDIO->MASK |= SDIO_IT; - } - else - { - /* Disable the SDIO interrupts */ - SDIO->MASK &= ~SDIO_IT; - } -} - -/** - * @brief Enables or disables the SDIO DMA request. - * @param NewState: new state of the selected SDIO DMA request. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_DMACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_DMAEN_BB = (uint32_t)NewState; -} - -/** - * @brief Initializes the SDIO Command according to the specified - * parameters in the SDIO_CmdInitStruct and send the command. - * @param SDIO_CmdInitStruct : pointer to a SDIO_CmdInitTypeDef - * structure that contains the configuration information for the SDIO command. - * @retval None - */ -void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->SDIO_CmdIndex)); - assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->SDIO_Response)); - assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->SDIO_Wait)); - assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->SDIO_CPSM)); - -/*---------------------------- SDIO ARG Configuration ------------------------*/ - /* Set the SDIO Argument value */ - SDIO->ARG = SDIO_CmdInitStruct->SDIO_Argument; - -/*---------------------------- SDIO CMD Configuration ------------------------*/ - /* Get the SDIO CMD value */ - tmpreg = SDIO->CMD; - /* Clear CMDINDEX, WAITRESP, WAITINT, WAITPEND, CPSMEN bits */ - tmpreg &= CMD_CLEAR_MASK; - /* Set CMDINDEX bits according to SDIO_CmdIndex value */ - /* Set WAITRESP bits according to SDIO_Response value */ - /* Set WAITINT and WAITPEND bits according to SDIO_Wait value */ - /* Set CPSMEN bits according to SDIO_CPSM value */ - tmpreg |= (uint32_t)SDIO_CmdInitStruct->SDIO_CmdIndex | SDIO_CmdInitStruct->SDIO_Response - | SDIO_CmdInitStruct->SDIO_Wait | SDIO_CmdInitStruct->SDIO_CPSM; - - /* Write to SDIO CMD */ - SDIO->CMD = tmpreg; -} - -/** - * @brief Fills each SDIO_CmdInitStruct member with its default value. - * @param SDIO_CmdInitStruct: pointer to an SDIO_CmdInitTypeDef - * structure which will be initialized. - * @retval None - */ -void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct) -{ - /* SDIO_CmdInitStruct members default value */ - SDIO_CmdInitStruct->SDIO_Argument = 0x00; - SDIO_CmdInitStruct->SDIO_CmdIndex = 0x00; - SDIO_CmdInitStruct->SDIO_Response = SDIO_Response_No; - SDIO_CmdInitStruct->SDIO_Wait = SDIO_Wait_No; - SDIO_CmdInitStruct->SDIO_CPSM = SDIO_CPSM_Disable; -} - -/** - * @brief Returns command index of last command for which response received. - * @param None - * @retval Returns the command index of the last command response received. - */ -uint8_t SDIO_GetCommandResponse(void) -{ - return (uint8_t)(SDIO->RESPCMD); -} - -/** - * @brief Returns response received from the card for the last command. - * @param SDIO_RESP: Specifies the SDIO response register. - * This parameter can be one of the following values: - * @arg SDIO_RESP1: Response Register 1 - * @arg SDIO_RESP2: Response Register 2 - * @arg SDIO_RESP3: Response Register 3 - * @arg SDIO_RESP4: Response Register 4 - * @retval The Corresponding response register value. - */ -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP) -{ - __IO uint32_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_RESP(SDIO_RESP)); - - tmp = SDIO_RESP_ADDR + SDIO_RESP; - - return (*(__IO uint32_t *) tmp); -} - -/** - * @brief Initializes the SDIO data path according to the specified - * parameters in the SDIO_DataInitStruct. - * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure that - * contains the configuration information for the SDIO command. - * @retval None - */ -void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->SDIO_DataLength)); - assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->SDIO_DataBlockSize)); - assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->SDIO_TransferDir)); - assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->SDIO_TransferMode)); - assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->SDIO_DPSM)); - -/*---------------------------- SDIO DTIMER Configuration ---------------------*/ - /* Set the SDIO Data TimeOut value */ - SDIO->DTIMER = SDIO_DataInitStruct->SDIO_DataTimeOut; - -/*---------------------------- SDIO DLEN Configuration -----------------------*/ - /* Set the SDIO DataLength value */ - SDIO->DLEN = SDIO_DataInitStruct->SDIO_DataLength; - -/*---------------------------- SDIO DCTRL Configuration ----------------------*/ - /* Get the SDIO DCTRL value */ - tmpreg = SDIO->DCTRL; - /* Clear DEN, DTMODE, DTDIR and DBCKSIZE bits */ - tmpreg &= DCTRL_CLEAR_MASK; - /* Set DEN bit according to SDIO_DPSM value */ - /* Set DTMODE bit according to SDIO_TransferMode value */ - /* Set DTDIR bit according to SDIO_TransferDir value */ - /* Set DBCKSIZE bits according to SDIO_DataBlockSize value */ - tmpreg |= (uint32_t)SDIO_DataInitStruct->SDIO_DataBlockSize | SDIO_DataInitStruct->SDIO_TransferDir - | SDIO_DataInitStruct->SDIO_TransferMode | SDIO_DataInitStruct->SDIO_DPSM; - - /* Write to SDIO DCTRL */ - SDIO->DCTRL = tmpreg; -} - -/** - * @brief Fills each SDIO_DataInitStruct member with its default value. - * @param SDIO_DataInitStruct: pointer to an SDIO_DataInitTypeDef structure which - * will be initialized. - * @retval None - */ -void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct) -{ - /* SDIO_DataInitStruct members default value */ - SDIO_DataInitStruct->SDIO_DataTimeOut = 0xFFFFFFFF; - SDIO_DataInitStruct->SDIO_DataLength = 0x00; - SDIO_DataInitStruct->SDIO_DataBlockSize = SDIO_DataBlockSize_1b; - SDIO_DataInitStruct->SDIO_TransferDir = SDIO_TransferDir_ToCard; - SDIO_DataInitStruct->SDIO_TransferMode = SDIO_TransferMode_Block; - SDIO_DataInitStruct->SDIO_DPSM = SDIO_DPSM_Disable; -} - -/** - * @brief Returns number of remaining data bytes to be transferred. - * @param None - * @retval Number of remaining data bytes to be transferred - */ -uint32_t SDIO_GetDataCounter(void) -{ - return SDIO->DCOUNT; -} - -/** - * @brief Read one data word from Rx FIFO. - * @param None - * @retval Data received - */ -uint32_t SDIO_ReadData(void) -{ - return SDIO->FIFO; -} - -/** - * @brief Write one data word to Tx FIFO. - * @param Data: 32-bit data word to write. - * @retval None - */ -void SDIO_WriteData(uint32_t Data) -{ - SDIO->FIFO = Data; -} - -/** - * @brief Returns the number of words left to be written to or read from FIFO. - * @param None - * @retval Remaining number of words. - */ -uint32_t SDIO_GetFIFOCount(void) -{ - return SDIO->FIFOCNT; -} - -/** - * @brief Starts the SD I/O Read Wait operation. - * @param NewState: new state of the Start SDIO Read Wait operation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_StartSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_RWSTART_BB = (uint32_t) NewState; -} - -/** - * @brief Stops the SD I/O Read Wait operation. - * @param NewState: new state of the Stop SDIO Read Wait operation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_StopSDIOReadWait(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_RWSTOP_BB = (uint32_t) NewState; -} - -/** - * @brief Sets one of the two options of inserting read wait interval. - * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode. - * This parametre can be: - * @arg SDIO_ReadWaitMode_CLK: Read Wait control by stopping SDIOCLK - * @arg SDIO_ReadWaitMode_DATA2: Read Wait control using SDIO_DATA2 - * @retval None - */ -void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode) -{ - /* Check the parameters */ - assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode)); - - *(__IO uint32_t *) DCTRL_RWMOD_BB = SDIO_ReadWaitMode; -} - -/** - * @brief Enables or disables the SD I/O Mode Operation. - * @param NewState: new state of SDIO specific operation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_SetSDIOOperation(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) DCTRL_SDIOEN_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the SD I/O Mode suspend command sending. - * @param NewState: new state of the SD I/O Mode suspend command. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_SendSDIOSuspendCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_SDIOSUSPEND_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the command completion signal. - * @param NewState: new state of command completion signal. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_CommandCompletionCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_ENCMDCOMPL_BB = (uint32_t)NewState; -} - -/** - * @brief Enables or disables the CE-ATA interrupt. - * @param NewState: new state of CE-ATA interrupt. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_CEATAITCmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)((~((uint32_t)NewState)) & ((uint32_t)0x1)); -} - -/** - * @brief Sends CE-ATA command (CMD61). - * @param NewState: new state of CE-ATA command. This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SDIO_SendCEATACmd(FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - *(__IO uint32_t *) CMD_ATACMD_BB = (uint32_t)NewState; -} - -/** - * @brief Checks whether the specified SDIO flag is set or not. - * @param SDIO_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide - * bus mode. - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval The new state of SDIO_FLAG (SET or RESET). - */ -FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG) -{ - FlagStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_FLAG(SDIO_FLAG)); - - if ((SDIO->STA & SDIO_FLAG) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the SDIO's pending flags. - * @param SDIO_FLAG: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide - * bus mode - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -void SDIO_ClearFlag(uint32_t SDIO_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_FLAG(SDIO_FLAG)); - - SDIO->ICR = SDIO_FLAG; -} - -/** - * @brief Checks whether the specified SDIO interrupt has occurred or not. - * @param SDIO_IT: specifies the SDIO interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval The new state of SDIO_IT (SET or RESET). - */ -ITStatus SDIO_GetITStatus(uint32_t SDIO_IT) -{ - ITStatus bitstatus = RESET; - - /* Check the parameters */ - assert_param(IS_SDIO_GET_IT(SDIO_IT)); - if ((SDIO->STA & SDIO_IT) != (uint32_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the SDIO’s interrupt pending bits. - * @param SDIO_IT: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -void SDIO_ClearITPendingBit(uint32_t SDIO_IT) -{ - /* Check the parameters */ - assert_param(IS_SDIO_CLEAR_IT(SDIO_IT)); - - SDIO->ICR = SDIO_IT; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c deleted file mode 100644 index 8f67f240a..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_spi.c +++ /dev/null @@ -1,907 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_spi.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the SPI firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_spi.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup SPI - * @brief SPI driver modules - * @{ - */ - -/** @defgroup SPI_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - - -/** @defgroup SPI_Private_Defines - * @{ - */ - -/* SPI SPE mask */ -#define CR1_SPE_Set ((uint16_t)0x0040) -#define CR1_SPE_Reset ((uint16_t)0xFFBF) - -/* I2S I2SE mask */ -#define I2SCFGR_I2SE_Set ((uint16_t)0x0400) -#define I2SCFGR_I2SE_Reset ((uint16_t)0xFBFF) - -/* SPI CRCNext mask */ -#define CR1_CRCNext_Set ((uint16_t)0x1000) - -/* SPI CRCEN mask */ -#define CR1_CRCEN_Set ((uint16_t)0x2000) -#define CR1_CRCEN_Reset ((uint16_t)0xDFFF) - -/* SPI SSOE mask */ -#define CR2_SSOE_Set ((uint16_t)0x0004) -#define CR2_SSOE_Reset ((uint16_t)0xFFFB) - -/* SPI registers Masks */ -#define CR1_CLEAR_Mask ((uint16_t)0x3040) -#define I2SCFGR_CLEAR_Mask ((uint16_t)0xF040) - -/* SPI or I2S mode selection masks */ -#define SPI_Mode_Select ((uint16_t)0xF7FF) -#define I2S_Mode_Select ((uint16_t)0x0800) - -/* I2S clock source selection masks */ -#define I2S2_CLOCK_SRC ((u32)(0x00020000)) -#define I2S3_CLOCK_SRC ((u32)(0x00040000)) -#define I2S_MUL_MASK ((u32)(0x0000F000)) -#define I2S_DIV_MASK ((u32)(0x000000F0)) - -/** - * @} - */ - -/** @defgroup SPI_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup SPI_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the SPIx peripheral registers to their default - * reset values (Affects also the I2Ss). - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @retval None - */ -void SPI_I2S_DeInit(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - if (SPIx == SPI1) - { - /* Enable SPI1 reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, ENABLE); - /* Release SPI1 from reset state */ - RCC_APB2PeriphResetCmd(RCC_APB2Periph_SPI1, DISABLE); - } - else if (SPIx == SPI2) - { - /* Enable SPI2 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, ENABLE); - /* Release SPI2 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI2, DISABLE); - } - else - { - if (SPIx == SPI3) - { - /* Enable SPI3 reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, ENABLE); - /* Release SPI3 from reset state */ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_SPI3, DISABLE); - } - } -} - -/** - * @brief Initializes the SPIx peripheral according to the specified - * parameters in the SPI_InitStruct. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_InitStruct: pointer to a SPI_InitTypeDef structure that - * contains the configuration information for the specified SPI peripheral. - * @retval None - */ -void SPI_Init(SPI_TypeDef* SPIx, SPI_InitTypeDef* SPI_InitStruct) -{ - uint16_t tmpreg = 0; - - /* check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Check the SPI parameters */ - assert_param(IS_SPI_DIRECTION_MODE(SPI_InitStruct->SPI_Direction)); - assert_param(IS_SPI_MODE(SPI_InitStruct->SPI_Mode)); - assert_param(IS_SPI_DATASIZE(SPI_InitStruct->SPI_DataSize)); - assert_param(IS_SPI_CPOL(SPI_InitStruct->SPI_CPOL)); - assert_param(IS_SPI_CPHA(SPI_InitStruct->SPI_CPHA)); - assert_param(IS_SPI_NSS(SPI_InitStruct->SPI_NSS)); - assert_param(IS_SPI_BAUDRATE_PRESCALER(SPI_InitStruct->SPI_BaudRatePrescaler)); - assert_param(IS_SPI_FIRST_BIT(SPI_InitStruct->SPI_FirstBit)); - assert_param(IS_SPI_CRC_POLYNOMIAL(SPI_InitStruct->SPI_CRCPolynomial)); - -/*---------------------------- SPIx CR1 Configuration ------------------------*/ - /* Get the SPIx CR1 value */ - tmpreg = SPIx->CR1; - /* Clear BIDIMode, BIDIOE, RxONLY, SSM, SSI, LSBFirst, BR, MSTR, CPOL and CPHA bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure SPIx: direction, NSS management, first transmitted bit, BaudRate prescaler - master/salve mode, CPOL and CPHA */ - /* Set BIDImode, BIDIOE and RxONLY bits according to SPI_Direction value */ - /* Set SSM, SSI and MSTR bits according to SPI_Mode and SPI_NSS values */ - /* Set LSBFirst bit according to SPI_FirstBit value */ - /* Set BR bits according to SPI_BaudRatePrescaler value */ - /* Set CPOL bit according to SPI_CPOL value */ - /* Set CPHA bit according to SPI_CPHA value */ - tmpreg |= (uint16_t)((uint32_t)SPI_InitStruct->SPI_Direction | SPI_InitStruct->SPI_Mode | - SPI_InitStruct->SPI_DataSize | SPI_InitStruct->SPI_CPOL | - SPI_InitStruct->SPI_CPHA | SPI_InitStruct->SPI_NSS | - SPI_InitStruct->SPI_BaudRatePrescaler | SPI_InitStruct->SPI_FirstBit); - /* Write to SPIx CR1 */ - SPIx->CR1 = tmpreg; - - /* Activate the SPI mode (Reset I2SMOD bit in I2SCFGR register) */ - SPIx->I2SCFGR &= SPI_Mode_Select; - -/*---------------------------- SPIx CRCPOLY Configuration --------------------*/ - /* Write to SPIx CRCPOLY */ - SPIx->CRCPR = SPI_InitStruct->SPI_CRCPolynomial; -} - -/** - * @brief Initializes the SPIx peripheral according to the specified - * parameters in the I2S_InitStruct. - * @param SPIx: where x can be 2 or 3 to select the SPI peripheral - * (configured in I2S mode). - * @param I2S_InitStruct: pointer to an I2S_InitTypeDef structure that - * contains the configuration information for the specified SPI peripheral - * configured in I2S mode. - * @note - * The function calculates the optimal prescaler needed to obtain the most - * accurate audio frequency (depending on the I2S clock source, the PLL values - * and the product configuration). But in case the prescaler value is greater - * than 511, the default value (0x02) will be configured instead. * - * @retval None - */ -void I2S_Init(SPI_TypeDef* SPIx, I2S_InitTypeDef* I2S_InitStruct) -{ - uint16_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1; - uint32_t tmp = 0; - RCC_ClocksTypeDef RCC_Clocks; - uint32_t sourceclock = 0; - - /* Check the I2S parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_I2S_MODE(I2S_InitStruct->I2S_Mode)); - assert_param(IS_I2S_STANDARD(I2S_InitStruct->I2S_Standard)); - assert_param(IS_I2S_DATA_FORMAT(I2S_InitStruct->I2S_DataFormat)); - assert_param(IS_I2S_MCLK_OUTPUT(I2S_InitStruct->I2S_MCLKOutput)); - assert_param(IS_I2S_AUDIO_FREQ(I2S_InitStruct->I2S_AudioFreq)); - assert_param(IS_I2S_CPOL(I2S_InitStruct->I2S_CPOL)); - -/*----------------------- SPIx I2SCFGR & I2SPR Configuration -----------------*/ - /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */ - SPIx->I2SCFGR &= I2SCFGR_CLEAR_Mask; - SPIx->I2SPR = 0x0002; - - /* Get the I2SCFGR register value */ - tmpreg = SPIx->I2SCFGR; - - /* If the default value has to be written, reinitialize i2sdiv and i2sodd*/ - if(I2S_InitStruct->I2S_AudioFreq == I2S_AudioFreq_Default) - { - i2sodd = (uint16_t)0; - i2sdiv = (uint16_t)2; - } - /* If the requested audio frequency is not the default, compute the prescaler */ - else - { - /* Check the frame length (For the Prescaler computing) */ - if(I2S_InitStruct->I2S_DataFormat == I2S_DataFormat_16b) - { - /* Packet length is 16 bits */ - packetlength = 1; - } - else - { - /* Packet length is 32 bits */ - packetlength = 2; - } - - /* Get the I2S clock source mask depending on the peripheral number */ - if(((uint32_t)SPIx) == SPI2_BASE) - { - /* The mask is relative to I2S2 */ - tmp = I2S2_CLOCK_SRC; - } - else - { - /* The mask is relative to I2S3 */ - tmp = I2S3_CLOCK_SRC; - } - - /* Check the I2S clock source configuration depending on the Device: - Only Connectivity line devices have the PLL3 VCO clock */ -#ifdef STM32F10X_CL - if((RCC->CFGR2 & tmp) != 0) - { - /* Get the configuration bits of RCC PLL3 multiplier */ - tmp = (uint32_t)((RCC->CFGR2 & I2S_MUL_MASK) >> 12); - - /* Get the value of the PLL3 multiplier */ - if((tmp > 5) && (tmp < 15)) - { - /* Multplier is between 8 and 14 (value 15 is forbidden) */ - tmp += 2; - } - else - { - if (tmp == 15) - { - /* Multiplier is 20 */ - tmp = 20; - } - } - /* Get the PREDIV2 value */ - sourceclock = (uint32_t)(((RCC->CFGR2 & I2S_DIV_MASK) >> 4) + 1); - - /* Calculate the Source Clock frequency based on PLL3 and PREDIV2 values */ - sourceclock = (uint32_t) ((HSE_Value / sourceclock) * tmp * 2); - } - else - { - /* I2S Clock source is System clock: Get System Clock frequency */ - RCC_GetClocksFreq(&RCC_Clocks); - - /* Get the source clock value: based on System Clock value */ - sourceclock = RCC_Clocks.SYSCLK_Frequency; - } -#else /* STM32F10X_HD */ - /* I2S Clock source is System clock: Get System Clock frequency */ - RCC_GetClocksFreq(&RCC_Clocks); - - /* Get the source clock value: based on System Clock value */ - sourceclock = RCC_Clocks.SYSCLK_Frequency; -#endif /* STM32F10X_CL */ - - /* Compute the Real divider depending on the MCLK output state with a flaoting point */ - if(I2S_InitStruct->I2S_MCLKOutput == I2S_MCLKOutput_Enable) - { - /* MCLK output is enabled */ - tmp = (uint16_t)(((((sourceclock / 256) * 10) / I2S_InitStruct->I2S_AudioFreq)) + 5); - } - else - { - /* MCLK output is disabled */ - tmp = (uint16_t)(((((sourceclock / (32 * packetlength)) *10 ) / I2S_InitStruct->I2S_AudioFreq)) + 5); - } - - /* Remove the flaoting point */ - tmp = tmp / 10; - - /* Check the parity of the divider */ - i2sodd = (uint16_t)(tmp & (u16)0x0001); - - /* Compute the i2sdiv prescaler */ - i2sdiv = (uint16_t)((tmp - i2sodd) / 2); - - /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */ - i2sodd = (uint16_t) (i2sodd << 8); - } - - /* Test if the divider is 1 or 0 or greater than 0xFF */ - if ((i2sdiv < 2) || (i2sdiv > 0xFF)) - { - /* Set the default values */ - i2sdiv = 2; - i2sodd = 0; - } - - /* Write to SPIx I2SPR register the computed value */ - SPIx->I2SPR = (uint16_t)(i2sdiv | (uint16_t)(i2sodd | (uint16_t)I2S_InitStruct->I2S_MCLKOutput)); - - /* Configure the I2S with the SPI_InitStruct values */ - tmpreg |= (uint16_t)(I2S_Mode_Select | (uint16_t)(I2S_InitStruct->I2S_Mode | \ - (uint16_t)(I2S_InitStruct->I2S_Standard | (uint16_t)(I2S_InitStruct->I2S_DataFormat | \ - (uint16_t)I2S_InitStruct->I2S_CPOL)))); - - /* Write to SPIx I2SCFGR */ - SPIx->I2SCFGR = tmpreg; -} - -/** - * @brief Fills each SPI_InitStruct member with its default value. - * @param SPI_InitStruct : pointer to a SPI_InitTypeDef structure which will be initialized. - * @retval None - */ -void SPI_StructInit(SPI_InitTypeDef* SPI_InitStruct) -{ -/*--------------- Reset SPI init structure parameters values -----------------*/ - /* Initialize the SPI_Direction member */ - SPI_InitStruct->SPI_Direction = SPI_Direction_2Lines_FullDuplex; - /* initialize the SPI_Mode member */ - SPI_InitStruct->SPI_Mode = SPI_Mode_Slave; - /* initialize the SPI_DataSize member */ - SPI_InitStruct->SPI_DataSize = SPI_DataSize_8b; - /* Initialize the SPI_CPOL member */ - SPI_InitStruct->SPI_CPOL = SPI_CPOL_Low; - /* Initialize the SPI_CPHA member */ - SPI_InitStruct->SPI_CPHA = SPI_CPHA_1Edge; - /* Initialize the SPI_NSS member */ - SPI_InitStruct->SPI_NSS = SPI_NSS_Hard; - /* Initialize the SPI_BaudRatePrescaler member */ - SPI_InitStruct->SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2; - /* Initialize the SPI_FirstBit member */ - SPI_InitStruct->SPI_FirstBit = SPI_FirstBit_MSB; - /* Initialize the SPI_CRCPolynomial member */ - SPI_InitStruct->SPI_CRCPolynomial = 7; -} - -/** - * @brief Fills each I2S_InitStruct member with its default value. - * @param I2S_InitStruct : pointer to a I2S_InitTypeDef structure which will be initialized. - * @retval None - */ -void I2S_StructInit(I2S_InitTypeDef* I2S_InitStruct) -{ -/*--------------- Reset I2S init structure parameters values -----------------*/ - /* Initialize the I2S_Mode member */ - I2S_InitStruct->I2S_Mode = I2S_Mode_SlaveTx; - - /* Initialize the I2S_Standard member */ - I2S_InitStruct->I2S_Standard = I2S_Standard_Phillips; - - /* Initialize the I2S_DataFormat member */ - I2S_InitStruct->I2S_DataFormat = I2S_DataFormat_16b; - - /* Initialize the I2S_MCLKOutput member */ - I2S_InitStruct->I2S_MCLKOutput = I2S_MCLKOutput_Disable; - - /* Initialize the I2S_AudioFreq member */ - I2S_InitStruct->I2S_AudioFreq = I2S_AudioFreq_Default; - - /* Initialize the I2S_CPOL member */ - I2S_InitStruct->I2S_CPOL = I2S_CPOL_Low; -} - -/** - * @brief Enables or disables the specified SPI peripheral. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral */ - SPIx->CR1 |= CR1_SPE_Set; - } - else - { - /* Disable the selected SPI peripheral */ - SPIx->CR1 &= CR1_SPE_Reset; - } -} - -/** - * @brief Enables or disables the specified SPI peripheral (in I2S mode). - * @param SPIx: where x can be 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void I2S_Cmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_23_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR |= I2SCFGR_I2SE_Set; - } - else - { - /* Disable the selected SPI peripheral (in I2S mode) */ - SPIx->I2SCFGR &= I2SCFGR_I2SE_Reset; - } -} - -/** - * @brief Enables or disables the specified SPI/I2S interrupts. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to be enabled or disabled. - * This parameter can be one of the following values: - * @arg SPI_I2S_IT_TXE: Tx buffer empty interrupt mask - * @arg SPI_I2S_IT_RXNE: Rx buffer not empty interrupt mask - * @arg SPI_I2S_IT_ERR: Error interrupt mask - * @param NewState: new state of the specified SPI/I2S interrupt. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_I2S_ITConfig(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT, FunctionalState NewState) -{ - uint16_t itpos = 0, itmask = 0 ; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_CONFIG_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = SPI_I2S_IT >> 4; - - /* Set the IT mask */ - itmask = (uint16_t)1 << (uint16_t)itpos; - - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S interrupt */ - SPIx->CR2 |= itmask; - } - else - { - /* Disable the selected SPI/I2S interrupt */ - SPIx->CR2 &= (uint16_t)~itmask; - } -} - -/** - * @brief Enables or disables the SPIx/I2Sx DMA interface. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_DMAReq: specifies the SPI/I2S DMA transfer request to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg SPI_I2S_DMAReq_Tx: Tx buffer DMA transfer request - * @arg SPI_I2S_DMAReq_Rx: Rx buffer DMA transfer request - * @param NewState: new state of the selected SPI/I2S DMA transfer request. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_I2S_DMACmd(SPI_TypeDef* SPIx, uint16_t SPI_I2S_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - assert_param(IS_SPI_I2S_DMAREQ(SPI_I2S_DMAReq)); - if (NewState != DISABLE) - { - /* Enable the selected SPI/I2S DMA requests */ - SPIx->CR2 |= SPI_I2S_DMAReq; - } - else - { - /* Disable the selected SPI/I2S DMA requests */ - SPIx->CR2 &= (uint16_t)~SPI_I2S_DMAReq; - } -} - -/** - * @brief Transmits a Data through the SPIx/I2Sx peripheral. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param Data : Data to be transmitted. - * @retval None - */ -void SPI_I2S_SendData(SPI_TypeDef* SPIx, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Write in the DR register the data to be sent */ - SPIx->DR = Data; -} - -/** - * @brief Returns the most recent received data by the SPIx/I2Sx peripheral. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @retval The value of the received data. - */ -uint16_t SPI_I2S_ReceiveData(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the data in the DR register */ - return SPIx->DR; -} - -/** - * @brief Configures internally by software the NSS pin for the selected SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_NSSInternalSoft: specifies the SPI NSS internal state. - * This parameter can be one of the following values: - * @arg SPI_NSSInternalSoft_Set: Set NSS pin internally - * @arg SPI_NSSInternalSoft_Reset: Reset NSS pin internally - * @retval None - */ -void SPI_NSSInternalSoftwareConfig(SPI_TypeDef* SPIx, uint16_t SPI_NSSInternalSoft) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_NSS_INTERNAL(SPI_NSSInternalSoft)); - if (SPI_NSSInternalSoft != SPI_NSSInternalSoft_Reset) - { - /* Set NSS pin internally by software */ - SPIx->CR1 |= SPI_NSSInternalSoft_Set; - } - else - { - /* Reset NSS pin internally by software */ - SPIx->CR1 &= SPI_NSSInternalSoft_Reset; - } -} - -/** - * @brief Enables or disables the SS output for the selected SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx SS output. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_SSOutputCmd(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI SS output */ - SPIx->CR2 |= CR2_SSOE_Set; - } - else - { - /* Disable the selected SPI SS output */ - SPIx->CR2 &= CR2_SSOE_Reset; - } -} - -/** - * @brief Configures the data size for the selected SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_DataSize: specifies the SPI data size. - * This parameter can be one of the following values: - * @arg SPI_DataSize_16b: Set data frame format to 16bit - * @arg SPI_DataSize_8b: Set data frame format to 8bit - * @retval None - */ -void SPI_DataSizeConfig(SPI_TypeDef* SPIx, uint16_t SPI_DataSize) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DATASIZE(SPI_DataSize)); - /* Clear DFF bit */ - SPIx->CR1 &= (uint16_t)~SPI_DataSize_16b; - /* Set new DFF bit value */ - SPIx->CR1 |= SPI_DataSize; -} - -/** - * @brief Transmit the SPIx CRC value. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @retval None - */ -void SPI_TransmitCRC(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Enable the selected SPI CRC transmission */ - SPIx->CR1 |= CR1_CRCNext_Set; -} - -/** - * @brief Enables or disables the CRC value calculation of the transfered bytes. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param NewState: new state of the SPIx CRC value calculation. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void SPI_CalculateCRC(SPI_TypeDef* SPIx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the selected SPI CRC calculation */ - SPIx->CR1 |= CR1_CRCEN_Set; - } - else - { - /* Disable the selected SPI CRC calculation */ - SPIx->CR1 &= CR1_CRCEN_Reset; - } -} - -/** - * @brief Returns the transmit or the receive CRC register value for the specified SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_CRC: specifies the CRC register to be read. - * This parameter can be one of the following values: - * @arg SPI_CRC_Tx: Selects Tx CRC register - * @arg SPI_CRC_Rx: Selects Rx CRC register - * @retval The selected CRC register value.. - */ -uint16_t SPI_GetCRC(SPI_TypeDef* SPIx, uint8_t SPI_CRC) -{ - uint16_t crcreg = 0; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_CRC(SPI_CRC)); - if (SPI_CRC != SPI_CRC_Rx) - { - /* Get the Tx CRC register */ - crcreg = SPIx->TXCRCR; - } - else - { - /* Get the Rx CRC register */ - crcreg = SPIx->RXCRCR; - } - /* Return the selected CRC register */ - return crcreg; -} - -/** - * @brief Returns the CRC Polynomial register value for the specified SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @retval The CRC Polynomial register value. - */ -uint16_t SPI_GetCRCPolynomial(SPI_TypeDef* SPIx) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - - /* Return the CRC polynomial register */ - return SPIx->CRCPR; -} - -/** - * @brief Selects the data transfer direction in bi-directional mode for the specified SPI. - * @param SPIx: where x can be 1, 2 or 3 to select the SPI peripheral. - * @param SPI_Direction: specifies the data transfer direction in bi-directional mode. - * This parameter can be one of the following values: - * @arg SPI_Direction_Tx: Selects Tx transmission direction - * @arg SPI_Direction_Rx: Selects Rx receive direction - * @retval None - */ -void SPI_BiDirectionalLineConfig(SPI_TypeDef* SPIx, uint16_t SPI_Direction) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_DIRECTION(SPI_Direction)); - if (SPI_Direction == SPI_Direction_Tx) - { - /* Set the Tx only mode */ - SPIx->CR1 |= SPI_Direction_Tx; - } - else - { - /* Set the Rx only mode */ - SPIx->CR1 &= SPI_Direction_Rx; - } -} - -/** - * @brief Checks whether the specified SPI/I2S flag is set or not. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_FLAG: specifies the SPI/I2S flag to check. - * This parameter can be one of the following values: - * @arg SPI_I2S_FLAG_TXE: Transmit buffer empty flag. - * @arg SPI_I2S_FLAG_RXNE: Receive buffer not empty flag. - * @arg SPI_I2S_FLAG_BSY: Busy flag. - * @arg SPI_I2S_FLAG_OVR: Overrun flag. - * @arg SPI_FLAG_MODF: Mode Fault flag. - * @arg SPI_FLAG_CRCERR: CRC Error flag. - * @arg I2S_FLAG_UDR: Underrun Error flag. - * @arg I2S_FLAG_CHSIDE: Channel Side flag. - * @retval The new state of SPI_I2S_FLAG (SET or RESET). - */ -FlagStatus SPI_I2S_GetFlagStatus(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_FLAG(SPI_I2S_FLAG)); - /* Check the status of the specified SPI/I2S flag */ - if ((SPIx->SR & SPI_I2S_FLAG) != (uint16_t)RESET) - { - /* SPI_I2S_FLAG is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_FLAG is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_FLAG status */ - return bitstatus; -} - -/** - * @brief Clears the SPIx CRC Error (CRCERR) flag. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * @param SPI_I2S_FLAG: specifies the SPI flag to clear. - * This function clears only CRCERR flag. - * @note - * - OVR (OverRun error) flag is cleared by software sequence: a read - * operation to SPI_DR register (SPI_I2S_ReceiveData()) followed by a read - * operation to SPI_SR register (SPI_I2S_GetFlagStatus()). - * - UDR (UnderRun error) flag is cleared by a read operation to - * SPI_SR register (SPI_I2S_GetFlagStatus()). - * - MODF (Mode Fault) flag is cleared by software sequence: a read/write - * operation to SPI_SR register (SPI_I2S_GetFlagStatus()) followed by a - * write operation to SPI_CR1 register (SPI_Cmd() to enable the SPI). - * @retval None - */ -void SPI_I2S_ClearFlag(SPI_TypeDef* SPIx, uint16_t SPI_I2S_FLAG) -{ - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_FLAG(SPI_I2S_FLAG)); - - /* Clear the selected SPI CRC Error (CRCERR) flag */ - SPIx->SR = (uint16_t)~SPI_I2S_FLAG; -} - -/** - * @brief Checks whether the specified SPI/I2S interrupt has occurred or not. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * - 2 or 3 in I2S mode - * @param SPI_I2S_IT: specifies the SPI/I2S interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_I2S_IT_TXE: Transmit buffer empty interrupt. - * @arg SPI_I2S_IT_RXNE: Receive buffer not empty interrupt. - * @arg SPI_I2S_IT_OVR: Overrun interrupt. - * @arg SPI_IT_MODF: Mode Fault interrupt. - * @arg SPI_IT_CRCERR: CRC Error interrupt. - * @arg I2S_IT_UDR: Underrun Error interrupt. - * @retval The new state of SPI_I2S_IT (SET or RESET). - */ -ITStatus SPI_I2S_GetITStatus(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) -{ - ITStatus bitstatus = RESET; - uint16_t itpos = 0, itmask = 0, enablestatus = 0; - - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_GET_IT(SPI_I2S_IT)); - - /* Get the SPI/I2S IT index */ - itpos = 0x01 << (SPI_I2S_IT & 0x0F); - - /* Get the SPI/I2S IT mask */ - itmask = SPI_I2S_IT >> 4; - - /* Set the IT mask */ - itmask = 0x01 << itmask; - - /* Get the SPI_I2S_IT enable bit status */ - enablestatus = (SPIx->CR2 & itmask) ; - - /* Check the status of the specified SPI/I2S interrupt */ - if (((SPIx->SR & itpos) != (uint16_t)RESET) && enablestatus) - { - /* SPI_I2S_IT is set */ - bitstatus = SET; - } - else - { - /* SPI_I2S_IT is reset */ - bitstatus = RESET; - } - /* Return the SPI_I2S_IT status */ - return bitstatus; -} - -/** - * @brief Clears the SPIx CRC Error (CRCERR) interrupt pending bit. - * @param SPIx: where x can be - * - 1, 2 or 3 in SPI mode - * @param SPI_I2S_IT: specifies the SPI interrupt pending bit to clear. - * This function clears only CRCERR intetrrupt pending bit. - * @note - * - OVR (OverRun Error) interrupt pending bit is cleared by software - * sequence: a read operation to SPI_DR register (SPI_I2S_ReceiveData()) - * followed by a read operation to SPI_SR register (SPI_I2S_GetITStatus()). - * - UDR (UnderRun Error) interrupt pending bit is cleared by a read - * operation to SPI_SR register (SPI_I2S_GetITStatus()). - * - MODF (Mode Fault) interrupt pending bit is cleared by software sequence: - * a read/write operation to SPI_SR register (SPI_I2S_GetITStatus()) - * followed by a write operation to SPI_CR1 register (SPI_Cmd() to enable - * the SPI). - * @retval None - */ -void SPI_I2S_ClearITPendingBit(SPI_TypeDef* SPIx, uint8_t SPI_I2S_IT) -{ - uint16_t itpos = 0; - /* Check the parameters */ - assert_param(IS_SPI_ALL_PERIPH(SPIx)); - assert_param(IS_SPI_I2S_CLEAR_IT(SPI_I2S_IT)); - - /* Get the SPI IT index */ - itpos = 0x01 << (SPI_I2S_IT & 0x0F); - - /* Clear the selected SPI CRC Error (CRCERR) interrupt pending bit */ - SPIx->SR = (uint16_t)~itpos; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c deleted file mode 100644 index 55b417b97..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_tim.c +++ /dev/null @@ -1,2799 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_tim.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the TIM firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_tim.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup TIM - * @brief TIM driver modules - * @{ - */ - -/** @defgroup TIM_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Defines - * @{ - */ - -/* ---------------------- TIM registers bit mask ------------------------ */ -#define CR1_CEN_Set ((uint16_t)0x0001) -#define CR1_CEN_Reset ((uint16_t)0x03FE) -#define CR1_UDIS_Set ((uint16_t)0x0002) -#define CR1_UDIS_Reset ((uint16_t)0x03FD) -#define CR1_URS_Set ((uint16_t)0x0004) -#define CR1_URS_Reset ((uint16_t)0x03FB) -#define CR1_OPM_Reset ((uint16_t)0x03F7) -#define CR1_CounterMode_Mask ((uint16_t)0x038F) -#define CR1_ARPE_Set ((uint16_t)0x0080) -#define CR1_ARPE_Reset ((uint16_t)0x037F) -#define CR1_CKD_Mask ((uint16_t)0x00FF) -#define CR2_CCPC_Set ((uint16_t)0x0001) -#define CR2_CCPC_Reset ((uint16_t)0xFFFE) -#define CR2_CCUS_Set ((uint16_t)0x0004) -#define CR2_CCUS_Reset ((uint16_t)0xFFFB) -#define CR2_CCDS_Set ((uint16_t)0x0008) -#define CR2_CCDS_Reset ((uint16_t)0xFFF7) -#define CR2_MMS_Mask ((uint16_t)0xFF8F) -#define CR2_TI1S_Set ((uint16_t)0x0080) -#define CR2_TI1S_Reset ((uint16_t)0xFF7F) -#define CR2_OIS1_Reset ((uint16_t)0x7EFF) -#define CR2_OIS1N_Reset ((uint16_t)0x7DFF) -#define CR2_OIS2_Reset ((uint16_t)0x7BFF) -#define CR2_OIS2N_Reset ((uint16_t)0x77FF) -#define CR2_OIS3_Reset ((uint16_t)0x6FFF) -#define CR2_OIS3N_Reset ((uint16_t)0x5FFF) -#define CR2_OIS4_Reset ((uint16_t)0x3FFF) -#define SMCR_SMS_Mask ((uint16_t)0xFFF8) -#define SMCR_ETR_Mask ((uint16_t)0x00FF) -#define SMCR_TS_Mask ((uint16_t)0xFF8F) -#define SMCR_MSM_Reset ((uint16_t)0xFF7F) -#define SMCR_ECE_Set ((uint16_t)0x4000) -#define CCMR_CC13S_Mask ((uint16_t)0xFFFC) -#define CCMR_CC24S_Mask ((uint16_t)0xFCFF) -#define CCMR_TI13Direct_Set ((uint16_t)0x0001) -#define CCMR_TI24Direct_Set ((uint16_t)0x0100) -#define CCMR_OC13FE_Reset ((uint16_t)0xFFFB) -#define CCMR_OC24FE_Reset ((uint16_t)0xFBFF) -#define CCMR_OC13PE_Reset ((uint16_t)0xFFF7) -#define CCMR_OC24PE_Reset ((uint16_t)0xF7FF) -#define CCMR_OC13M_Mask ((uint16_t)0xFF8F) -#define CCMR_OC24M_Mask ((uint16_t)0x8FFF) -#define CCMR_OC13CE_Reset ((uint16_t)0xFF7F) -#define CCMR_OC24CE_Reset ((uint16_t)0x7FFF) -#define CCMR_IC13PSC_Mask ((uint16_t)0xFFF3) -#define CCMR_IC24PSC_Mask ((uint16_t)0xF3FF) -#define CCMR_IC13F_Mask ((uint16_t)0xFF0F) -#define CCMR_IC24F_Mask ((uint16_t)0x0FFF) -#define CCMR_Offset ((uint16_t)0x0018) -#define CCER_CCE_Set ((uint16_t)0x0001) -#define CCER_CCNE_Set ((uint16_t)0x0004) -#define CCER_CC1P_Reset ((uint16_t)0xFFFD) -#define CCER_CC2P_Reset ((uint16_t)0xFFDF) -#define CCER_CC3P_Reset ((uint16_t)0xFDFF) -#define CCER_CC4P_Reset ((uint16_t)0xDFFF) -#define CCER_CC1NP_Reset ((uint16_t)0xFFF7) -#define CCER_CC2NP_Reset ((uint16_t)0xFF7F) -#define CCER_CC3NP_Reset ((uint16_t)0xF7FF) -#define CCER_CC1E_Set ((uint16_t)0x0001) -#define CCER_CC1E_Reset ((uint16_t)0xFFFE) -#define CCER_CC1NE_Reset ((uint16_t)0xFFFB) -#define CCER_CC2E_Set ((uint16_t)0x0010) -#define CCER_CC2E_Reset ((uint16_t)0xFFEF) -#define CCER_CC2NE_Reset ((uint16_t)0xFFBF) -#define CCER_CC3E_Set ((uint16_t)0x0100) -#define CCER_CC3E_Reset ((uint16_t)0xFEFF) -#define CCER_CC3NE_Reset ((uint16_t)0xFBFF) -#define CCER_CC4E_Set ((uint16_t)0x1000) -#define CCER_CC4E_Reset ((uint16_t)0xEFFF) -#define BDTR_MOE_Set ((uint16_t)0x8000) -#define BDTR_MOE_Reset ((uint16_t)0x7FFF) -/** - * @} - */ - -/** @defgroup TIM_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_FunctionPrototypes - * @{ - */ - -static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter); -/** - * @} - */ - -/** @defgroup TIM_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup TIM_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the TIMx peripheral registers to their default reset values. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @retval None - */ -void TIM_DeInit(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - - if (TIMx == TIM1) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM1, DISABLE); - } - else if (TIMx == TIM2) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM2, DISABLE); - } - else if (TIMx == TIM3) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM3, DISABLE); - } - else if (TIMx == TIM4) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM4, DISABLE); - } - else if (TIMx == TIM5) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM5, DISABLE); - } - else if (TIMx == TIM6) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM6, DISABLE); - } - else if (TIMx == TIM7) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_TIM7, DISABLE); - } - else - { - if (TIMx == TIM8) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_TIM8, DISABLE); - } - } -} - -/** - * @brief Initializes the TIMx Time Base Unit peripheral according to - * the specified parameters in the TIM_TimeBaseInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_TimeBaseInitStruct: pointer to a TIM_TimeBaseInitTypeDef - * structure that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_TimeBaseInit(TIM_TypeDef* TIMx, TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_TimeBaseInitStruct->TIM_CounterMode)); - assert_param(IS_TIM_CKD_DIV(TIM_TimeBaseInitStruct->TIM_ClockDivision)); - /* Select the Counter Mode and set the clock division */ - TIMx->CR1 &= CR1_CKD_Mask & CR1_CounterMode_Mask; - TIMx->CR1 |= (uint32_t)TIM_TimeBaseInitStruct->TIM_ClockDivision | - TIM_TimeBaseInitStruct->TIM_CounterMode; - - /* Set the Autoreload value */ - TIMx->ARR = TIM_TimeBaseInitStruct->TIM_Period ; - - /* Set the Prescaler value */ - TIMx->PSC = TIM_TimeBaseInitStruct->TIM_Prescaler; - - if ((((uint32_t) TIMx) == TIM1_BASE) || (((uint32_t) TIMx) == TIM8_BASE)) - { - /* Set the Repetition Counter value */ - TIMx->RCR = TIM_TimeBaseInitStruct->TIM_RepetitionCounter; - } - - /* Generate an update event to reload the Prescaler value immediatly */ - TIMx->EGR = TIM_PSCReloadMode_Immediate; -} - -/** - * @brief Initializes the TIMx Channel1 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC1Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= CCER_CC1E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC13M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC1P_Reset; - /* Set the Output Compare Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCPolarity; - - /* Set the Output State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputState; - - /* Set the Capture Compare Register value */ - TIMx->CCR1 = TIM_OCInitStruct->TIM_Pulse; - - if(((uint32_t) TIMx == TIM1_BASE) || ((uint32_t) TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC1NP_Reset; - /* Set the Output N Polarity */ - tmpccer |= TIM_OCInitStruct->TIM_OCNPolarity; - /* Reset the Output N State */ - tmpccer &= CCER_CC1NE_Reset; - - /* Set the Output N State */ - tmpccer |= TIM_OCInitStruct->TIM_OutputNState; - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS1_Reset; - tmpcr2 &= CR2_OIS1N_Reset; - /* Set the Output Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCIdleState; - /* Set the Output N Idle state */ - tmpcr2 |= TIM_OCInitStruct->TIM_OCNIdleState; - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel2 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC2Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC2E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR1 register value */ - tmpccmrx = TIMx->CCMR1; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC24M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC2P_Reset; - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 4); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 4); - - /* Set the Capture Compare Register value */ - TIMx->CCR2 = TIM_OCInitStruct->TIM_Pulse; - - if(((uint32_t) TIMx == TIM1_BASE) || ((uint32_t) TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC2NP_Reset; - /* Set the Output N Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 4); - /* Reset the Output N State */ - tmpccer &= CCER_CC2NE_Reset; - - /* Set the Output N State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 4); - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS2_Reset; - tmpcr2 &= CR2_OIS2N_Reset; - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 2); - /* Set the Output N Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 2); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel3 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC3Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC3E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC13M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= TIM_OCInitStruct->TIM_OCMode; - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC3P_Reset; - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 8); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 8); - - /* Set the Capture Compare Register value */ - TIMx->CCR3 = TIM_OCInitStruct->TIM_Pulse; - - if(((uint32_t) TIMx == TIM1_BASE) || ((uint32_t) TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OUTPUTN_STATE(TIM_OCInitStruct->TIM_OutputNState)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCInitStruct->TIM_OCNPolarity)); - assert_param(IS_TIM_OCNIDLE_STATE(TIM_OCInitStruct->TIM_OCNIdleState)); - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - - /* Reset the Output N Polarity level */ - tmpccer &= CCER_CC3NP_Reset; - /* Set the Output N Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCNPolarity << 8); - /* Reset the Output N State */ - tmpccer &= CCER_CC3NE_Reset; - - /* Set the Output N State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputNState << 8); - /* Reset the Ouput Compare and Output Compare N IDLE State */ - tmpcr2 &= CR2_OIS3_Reset; - tmpcr2 &= CR2_OIS3N_Reset; - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 4); - /* Set the Output N Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCNIdleState << 4); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIMx Channel4 according to the specified - * parameters in the TIM_OCInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCInitStruct: pointer to a TIM_OCInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_OC4Init(TIM_TypeDef* TIMx, TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - uint16_t tmpccmrx = 0, tmpccer = 0, tmpcr2 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_MODE(TIM_OCInitStruct->TIM_OCMode)); - assert_param(IS_TIM_OUTPUT_STATE(TIM_OCInitStruct->TIM_OutputState)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCInitStruct->TIM_OCPolarity)); - /* Disable the Channel 2: Reset the CC4E Bit */ - TIMx->CCER &= CCER_CC4E_Reset; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - /* Get the TIMx CR2 register value */ - tmpcr2 = TIMx->CR2; - - /* Get the TIMx CCMR2 register value */ - tmpccmrx = TIMx->CCMR2; - - /* Reset the Output Compare Mode Bits */ - tmpccmrx &= CCMR_OC24M_Mask; - - /* Select the Output Compare Mode */ - tmpccmrx |= (uint16_t)(TIM_OCInitStruct->TIM_OCMode << 8); - - /* Reset the Output Polarity level */ - tmpccer &= CCER_CC4P_Reset; - /* Set the Output Compare Polarity */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OCPolarity << 12); - - /* Set the Output State */ - tmpccer |= (uint16_t)(TIM_OCInitStruct->TIM_OutputState << 12); - - /* Set the Capture Compare Register value */ - TIMx->CCR4 = TIM_OCInitStruct->TIM_Pulse; - - if(((uint32_t) TIMx == TIM1_BASE) || ((uint32_t) TIMx == TIM8_BASE)) - { - assert_param(IS_TIM_OCIDLE_STATE(TIM_OCInitStruct->TIM_OCIdleState)); - /* Reset the Ouput Compare IDLE State */ - tmpcr2 &= CR2_OIS4_Reset; - /* Set the Output Idle state */ - tmpcr2 |= (uint16_t)(TIM_OCInitStruct->TIM_OCIdleState << 6); - } - /* Write to TIMx CR2 */ - TIMx->CR2 = tmpcr2; - - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmrx; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Initializes the TIM peripheral according to the specified - * parameters in the TIM_ICInitStruct. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_ICInit(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_ICInitStruct->TIM_Channel)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICInitStruct->TIM_ICPolarity)); - assert_param(IS_TIM_IC_SELECTION(TIM_ICInitStruct->TIM_ICSelection)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICInitStruct->TIM_ICPrescaler)); - assert_param(IS_TIM_IC_FILTER(TIM_ICInitStruct->TIM_ICFilter)); - - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_2) - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_3) - { - /* TI3 Configuration */ - TI3_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC3Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI4 Configuration */ - TI4_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, - TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC4Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/** - * @brief Configures the TIM peripheral according to the specified - * parameters in the TIM_ICInitStruct to measure an external PWM signal. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICInitStruct: pointer to a TIM_ICInitTypeDef structure - * that contains the configuration information for the specified TIM peripheral. - * @retval None - */ -void TIM_PWMIConfig(TIM_TypeDef* TIMx, TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - uint16_t icoppositepolarity = TIM_ICPolarity_Rising; - uint16_t icoppositeselection = TIM_ICSelection_DirectTI; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Select the Opposite Input Polarity */ - if (TIM_ICInitStruct->TIM_ICPolarity == TIM_ICPolarity_Rising) - { - icoppositepolarity = TIM_ICPolarity_Falling; - } - else - { - icoppositepolarity = TIM_ICPolarity_Rising; - } - /* Select the Opposite Input */ - if (TIM_ICInitStruct->TIM_ICSelection == TIM_ICSelection_DirectTI) - { - icoppositeselection = TIM_ICSelection_IndirectTI; - } - else - { - icoppositeselection = TIM_ICSelection_DirectTI; - } - if (TIM_ICInitStruct->TIM_Channel == TIM_Channel_1) - { - /* TI1 Configuration */ - TI1_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - /* TI2 Configuration */ - TI2_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } - else - { - /* TI2 Configuration */ - TI2_Config(TIMx, TIM_ICInitStruct->TIM_ICPolarity, TIM_ICInitStruct->TIM_ICSelection, - TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC2Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - /* TI1 Configuration */ - TI1_Config(TIMx, icoppositepolarity, icoppositeselection, TIM_ICInitStruct->TIM_ICFilter); - /* Set the Input Capture Prescaler value */ - TIM_SetIC1Prescaler(TIMx, TIM_ICInitStruct->TIM_ICPrescaler); - } -} - -/** - * @brief Configures the: Break feature, dead time, Lock level, the OSSI, - * the OSSR State and the AOE(automatic output enable). - * @param TIMx: where x can be 1 or 8 to select the TIM - * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure that - * contains the BDTR Register configuration information for the TIM peripheral. - * @retval None - */ -void TIM_BDTRConfig(TIM_TypeDef* TIMx, TIM_BDTRInitTypeDef *TIM_BDTRInitStruct) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OSSR_STATE(TIM_BDTRInitStruct->TIM_OSSRState)); - assert_param(IS_TIM_OSSI_STATE(TIM_BDTRInitStruct->TIM_OSSIState)); - assert_param(IS_TIM_LOCK_LEVEL(TIM_BDTRInitStruct->TIM_LOCKLevel)); - assert_param(IS_TIM_BREAK_STATE(TIM_BDTRInitStruct->TIM_Break)); - assert_param(IS_TIM_BREAK_POLARITY(TIM_BDTRInitStruct->TIM_BreakPolarity)); - assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(TIM_BDTRInitStruct->TIM_AutomaticOutput)); - /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSR State, - the OSSI State, the dead time value and the Automatic Output Enable Bit */ - TIMx->BDTR = (uint32_t)TIM_BDTRInitStruct->TIM_OSSRState | TIM_BDTRInitStruct->TIM_OSSIState | - TIM_BDTRInitStruct->TIM_LOCKLevel | TIM_BDTRInitStruct->TIM_DeadTime | - TIM_BDTRInitStruct->TIM_Break | TIM_BDTRInitStruct->TIM_BreakPolarity | - TIM_BDTRInitStruct->TIM_AutomaticOutput; -} - -/** - * @brief Fills each TIM_TimeBaseInitStruct member with its default value. - * @param TIM_TimeBaseInitStruct : pointer to a TIM_TimeBaseInitTypeDef - * structure which will be initialized. - * @retval None - */ -void TIM_TimeBaseStructInit(TIM_TimeBaseInitTypeDef* TIM_TimeBaseInitStruct) -{ - /* Set the default configuration */ - TIM_TimeBaseInitStruct->TIM_Period = 0xFFFF; - TIM_TimeBaseInitStruct->TIM_Prescaler = 0x0000; - TIM_TimeBaseInitStruct->TIM_ClockDivision = TIM_CKD_DIV1; - TIM_TimeBaseInitStruct->TIM_CounterMode = TIM_CounterMode_Up; - TIM_TimeBaseInitStruct->TIM_RepetitionCounter = 0x0000; -} - -/** - * @brief Fills each TIM_OCInitStruct member with its default value. - * @param TIM_OCInitStruct : pointer to a TIM_OCInitTypeDef structure which will - * be initialized. - * @retval None - */ -void TIM_OCStructInit(TIM_OCInitTypeDef* TIM_OCInitStruct) -{ - /* Set the default configuration */ - TIM_OCInitStruct->TIM_OCMode = TIM_OCMode_Timing; - TIM_OCInitStruct->TIM_OutputState = TIM_OutputState_Disable; - TIM_OCInitStruct->TIM_OutputNState = TIM_OutputNState_Disable; - TIM_OCInitStruct->TIM_Pulse = 0x0000; - TIM_OCInitStruct->TIM_OCPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCNPolarity = TIM_OCPolarity_High; - TIM_OCInitStruct->TIM_OCIdleState = TIM_OCIdleState_Reset; - TIM_OCInitStruct->TIM_OCNIdleState = TIM_OCNIdleState_Reset; -} - -/** - * @brief Fills each TIM_ICInitStruct member with its default value. - * @param TIM_ICInitStruct : pointer to a TIM_ICInitTypeDef structure which will - * be initialized. - * @retval None - */ -void TIM_ICStructInit(TIM_ICInitTypeDef* TIM_ICInitStruct) -{ - /* Set the default configuration */ - TIM_ICInitStruct->TIM_Channel = TIM_Channel_1; - TIM_ICInitStruct->TIM_ICPolarity = TIM_ICPolarity_Rising; - TIM_ICInitStruct->TIM_ICSelection = TIM_ICSelection_DirectTI; - TIM_ICInitStruct->TIM_ICPrescaler = TIM_ICPSC_DIV1; - TIM_ICInitStruct->TIM_ICFilter = 0x00; -} - -/** - * @brief Fills each TIM_BDTRInitStruct member with its default value. - * @param TIM_BDTRInitStruct: pointer to a TIM_BDTRInitTypeDef structure which - * will be initialized. - * @retval None - */ -void TIM_BDTRStructInit(TIM_BDTRInitTypeDef* TIM_BDTRInitStruct) -{ - /* Set the default configuration */ - TIM_BDTRInitStruct->TIM_OSSRState = TIM_OSSRState_Disable; - TIM_BDTRInitStruct->TIM_OSSIState = TIM_OSSIState_Disable; - TIM_BDTRInitStruct->TIM_LOCKLevel = TIM_LOCKLevel_OFF; - TIM_BDTRInitStruct->TIM_DeadTime = 0x00; - TIM_BDTRInitStruct->TIM_Break = TIM_Break_Disable; - TIM_BDTRInitStruct->TIM_BreakPolarity = TIM_BreakPolarity_Low; - TIM_BDTRInitStruct->TIM_AutomaticOutput = TIM_AutomaticOutput_Disable; -} - -/** - * @brief Enables or disables the specified TIM peripheral. - * @param TIMx: where x can be 1 to 8 to select the TIMx peripheral. - * @param NewState: new state of the TIMx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_Cmd(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the TIM Counter */ - TIMx->CR1 |= CR1_CEN_Set; - } - else - { - /* Disable the TIM Counter */ - TIMx->CR1 &= CR1_CEN_Reset; - } -} - -/** - * @brief Enables or disables the TIM peripheral Main Outputs. - * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral. - * @param NewState: new state of the TIM peripheral Main Outputs. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_CtrlPWMOutputs(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the TIM Main Output */ - TIMx->BDTR |= BDTR_MOE_Set; - } - else - { - /* Disable the TIM Main Output */ - TIMx->BDTR &= BDTR_MOE_Reset; - } -} - -/** - * @brief Enables or disables the specified TIM interrupts. - * @param TIMx: where x can be 1 to 8 to select the TIMx peripheral. - * @param TIM_IT: specifies the TIM interrupts sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg TIM_IT_Update: TIM update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * @note - * - TIM6 and TIM7 can only generate an update interrupt. - * - TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. - * @param NewState: new state of the TIM interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_ITConfig(TIM_TypeDef* TIMx, uint16_t TIM_IT, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Interrupt sources */ - TIMx->DIER |= TIM_IT; - } - else - { - /* Disable the Interrupt sources */ - TIMx->DIER &= (uint16_t)~TIM_IT; - } -} - -/** - * @brief Configures the TIMx event to be generate by software. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_EventSource: specifies the event source. - * This parameter can be one or more of the following values: - * @arg TIM_EventSource_Update: Timer update Event source - * @arg TIM_EventSource_CC1: Timer Capture Compare 1 Event source - * @arg TIM_EventSource_CC2: Timer Capture Compare 2 Event source - * @arg TIM_EventSource_CC3: Timer Capture Compare 3 Event source - * @arg TIM_EventSource_CC4: Timer Capture Compare 4 Event source - * @arg TIM_EventSource_COM: Timer COM event source - * @arg TIM_EventSource_Trigger: Timer Trigger Event source - * @arg TIM_EventSource_Break: Timer Break event source - * @note - * - TIM6 and TIM7 can only generate an update event. - * - TIM_EventSource_COM and TIM_EventSource_Break are used only with TIM1 and TIM8. - * @retval None - */ -void TIM_GenerateEvent(TIM_TypeDef* TIMx, uint16_t TIM_EventSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_EVENT_SOURCE(TIM_EventSource)); - - /* Set the event sources */ - TIMx->EGR = TIM_EventSource; -} - -/** - * @brief Configures the TIMx’s DMA interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_DMABase: DMA Base address. - * This parameter can be one of the following values: - * @arg TIM_DMABase_CR, TIM_DMABase_CR2, TIM_DMABase_SMCR, - * TIM_DMABase_DIER, TIM1_DMABase_SR, TIM_DMABase_EGR, - * TIM_DMABase_CCMR1, TIM_DMABase_CCMR2, TIM_DMABase_CCER, - * TIM_DMABase_CNT, TIM_DMABase_PSC, TIM_DMABase_ARR, - * TIM_DMABase_RCR, TIM_DMABase_CCR1, TIM_DMABase_CCR2, - * TIM_DMABase_CCR3, TIM_DMABase_CCR4, TIM_DMABase_BDTR, - * TIM_DMABase_DCR. - * @param TIM_DMABurstLength: DMA Burst length. - * This parameter can be one value between: - * TIM_DMABurstLength_1Byte and TIM_DMABurstLength_18Bytes. - * @retval None - */ -void TIM_DMAConfig(TIM_TypeDef* TIMx, uint16_t TIM_DMABase, uint16_t TIM_DMABurstLength) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_BASE(TIM_DMABase)); - assert_param(IS_TIM_DMA_LENGTH(TIM_DMABurstLength)); - /* Set the DMA Base and the DMA Burst Length */ - TIMx->DCR = TIM_DMABase | TIM_DMABurstLength; -} - -/** - * @brief Enables or disables the TIMx’s DMA Requests. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_DMASource: specifies the DMA Request sources. - * This parameter can be any combination of the following values: - * @arg TIM_DMA_Update: TIM update Interrupt source - * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source - * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source - * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source - * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source - * @arg TIM_DMA_COM: TIM Commutation DMA source - * @arg TIM_DMA_Trigger: TIM Trigger DMA source - * @param NewState: new state of the DMA Request sources. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_DMACmd(TIM_TypeDef* TIMx, uint16_t TIM_DMASource, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_DMA_SOURCE(TIM_DMASource)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the DMA sources */ - TIMx->DIER |= TIM_DMASource; - } - else - { - /* Disable the DMA sources */ - TIMx->DIER &= (uint16_t)~TIM_DMASource; - } -} - -/** - * @brief Configures the TIMx interrnal Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval None - */ -void TIM_InternalClockConfig(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Disable slave mode to clock the prescaler directly with the internal clock */ - TIMx->SMCR &= SMCR_SMS_Mask; -} - -/** - * @brief Configures the TIMx Internal Trigger as External Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ITRSource: Trigger source. - * This parameter can be one of the following values: - * @param TIM_TS_ITR0: Internal Trigger 0 - * @param TIM_TS_ITR1: Internal Trigger 1 - * @param TIM_TS_ITR2: Internal Trigger 2 - * @param TIM_TS_ITR3: Internal Trigger 3 - * @retval None - */ -void TIM_ITRxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_INTERNAL_TRIGGER_SELECTION(TIM_InputTriggerSource)); - /* Select the Internal Trigger */ - TIM_SelectInputTrigger(TIMx, TIM_InputTriggerSource); - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/** - * @brief Configures the TIMx Trigger as External Clock - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_TIxExternalCLKSource: Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TIxExternalCLK1Source_TI1ED: TI1 Edge Detector - * @arg TIM_TIxExternalCLK1Source_TI1: Filtered Timer Input 1 - * @arg TIM_TIxExternalCLK1Source_TI2: Filtered Timer Input 2 - * @param TIM_ICPolarity: specifies the TIx Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param ICFilter : specifies the filter value. - * This parameter must be a value between 0x0 and 0xF. - * @retval None - */ -void TIM_TIxExternalClockConfig(TIM_TypeDef* TIMx, uint16_t TIM_TIxExternalCLKSource, - uint16_t TIM_ICPolarity, uint16_t ICFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_TIXCLK_SOURCE(TIM_TIxExternalCLKSource)); - assert_param(IS_TIM_IC_POLARITY(TIM_ICPolarity)); - assert_param(IS_TIM_IC_FILTER(ICFilter)); - /* Configure the Timer Input Clock Source */ - if (TIM_TIxExternalCLKSource == TIM_TIxExternalCLK1Source_TI2) - { - TI2_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - else - { - TI1_Config(TIMx, TIM_ICPolarity, TIM_ICSelection_DirectTI, ICFilter); - } - /* Select the Trigger source */ - TIM_SelectInputTrigger(TIMx, TIM_TIxExternalCLKSource); - /* Select the External clock mode1 */ - TIMx->SMCR |= TIM_SlaveMode_External1; -} - -/** - * @brief Configures the External clock Mode1 - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRClockMode1Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter) -{ - uint16_t tmpsmcr = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the SMS Bits */ - tmpsmcr &= SMCR_SMS_Mask; - /* Select the External clock mode1 */ - tmpsmcr |= TIM_SlaveMode_External1; - /* Select the Trigger selection : ETRF */ - tmpsmcr &= SMCR_TS_Mask; - tmpsmcr |= TIM_TS_ETRF; - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the External clock Mode2 - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRClockMode2Config(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, - uint16_t TIM_ExtTRGPolarity, uint16_t ExtTRGFilter) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - /* Configure the ETR Clock source */ - TIM_ETRConfig(TIMx, TIM_ExtTRGPrescaler, TIM_ExtTRGPolarity, ExtTRGFilter); - /* Enable the External clock mode2 */ - TIMx->SMCR |= SMCR_ECE_Set; -} - -/** - * @brief Configures the TIMx External Trigger (ETR). - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPSC_OFF: ETRP Prescaler OFF. - * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2. - * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4. - * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8. - * @param TIM_ExtTRGPolarity: The external Trigger Polarity. - * This parameter can be one of the following values: - * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active. - * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active. - * @param ExtTRGFilter: External Trigger Filter. - * This parameter must be a value between 0x00 and 0x0F - * @retval None - */ -void TIM_ETRConfig(TIM_TypeDef* TIMx, uint16_t TIM_ExtTRGPrescaler, uint16_t TIM_ExtTRGPolarity, - uint16_t ExtTRGFilter) -{ - uint16_t tmpsmcr = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_EXT_PRESCALER(TIM_ExtTRGPrescaler)); - assert_param(IS_TIM_EXT_POLARITY(TIM_ExtTRGPolarity)); - assert_param(IS_TIM_EXT_FILTER(ExtTRGFilter)); - tmpsmcr = TIMx->SMCR; - /* Reset the ETR Bits */ - tmpsmcr &= SMCR_ETR_Mask; - /* Set the Prescaler, the Filter value and the Polarity */ - tmpsmcr |= (uint16_t)(TIM_ExtTRGPrescaler | (uint16_t)(TIM_ExtTRGPolarity | (uint16_t)(ExtTRGFilter << (uint16_t)8))); - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the TIMx Prescaler. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param Prescaler: specifies the Prescaler Register value - * @param TIM_PSCReloadMode: specifies the TIM Prescaler Reload mode - * This parameter can be one of the following values: - * @arg TIM_PSCReloadMode_Update: The Prescaler is loaded at the update event. - * @arg TIM_PSCReloadMode_Immediate: The Prescaler is loaded immediatly. - * @retval None - */ -void TIM_PrescalerConfig(TIM_TypeDef* TIMx, uint16_t Prescaler, uint16_t TIM_PSCReloadMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_PRESCALER_RELOAD(TIM_PSCReloadMode)); - /* Set the Prescaler value */ - TIMx->PSC = Prescaler; - /* Set or reset the UG Bit */ - TIMx->EGR = TIM_PSCReloadMode; -} - -/** - * @brief Specifies the TIMx Counter Mode to be used. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_CounterMode: specifies the Counter Mode to be used - * This parameter can be one of the following values: - * @arg TIM_CounterMode_Up: TIM Up Counting Mode - * @arg TIM_CounterMode_Down: TIM Down Counting Mode - * @arg TIM_CounterMode_CenterAligned1: TIM Center Aligned Mode1 - * @arg TIM_CounterMode_CenterAligned2: TIM Center Aligned Mode2 - * @arg TIM_CounterMode_CenterAligned3: TIM Center Aligned Mode3 - * @retval None - */ -void TIM_CounterModeConfig(TIM_TypeDef* TIMx, uint16_t TIM_CounterMode) -{ - uint16_t tmpcr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_COUNTER_MODE(TIM_CounterMode)); - tmpcr1 = TIMx->CR1; - /* Reset the CMS and DIR Bits */ - tmpcr1 &= CR1_CounterMode_Mask; - /* Set the Counter Mode */ - tmpcr1 |= TIM_CounterMode; - /* Write to TIMx CR1 register */ - TIMx->CR1 = tmpcr1; -} - -/** - * @brief Selects the Input Trigger source - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_InputTriggerSource: The Input Trigger source. - * This parameter can be one of the following values: - * @arg TIM_TS_ITR0: Internal Trigger 0 - * @arg TIM_TS_ITR1: Internal Trigger 1 - * @arg TIM_TS_ITR2: Internal Trigger 2 - * @arg TIM_TS_ITR3: Internal Trigger 3 - * @arg TIM_TS_TI1F_ED: TI1 Edge Detector - * @arg TIM_TS_TI1FP1: Filtered Timer Input 1 - * @arg TIM_TS_TI2FP2: Filtered Timer Input 2 - * @arg TIM_TS_ETRF: External Trigger input - * @retval None - */ -void TIM_SelectInputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_InputTriggerSource) -{ - uint16_t tmpsmcr = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_TRIGGER_SELECTION(TIM_InputTriggerSource)); - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - /* Reset the TS Bits */ - tmpsmcr &= SMCR_TS_Mask; - /* Set the Input Trigger source */ - tmpsmcr |= TIM_InputTriggerSource; - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; -} - -/** - * @brief Configures the TIMx Encoder Interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_EncoderMode: specifies the TIMx Encoder Mode. - * This parameter can be one of the following values: - * @arg TIM_EncoderMode_TI1: Counter counts on TI1FP1 edge depending on TI2FP2 level. - * @arg TIM_EncoderMode_TI2: Counter counts on TI2FP2 edge depending on TI1FP1 level. - * @arg TIM_EncoderMode_TI12: Counter counts on both TI1FP1 and TI2FP2 edges depending - * on the level of the other input. - * @param TIM_IC1Polarity: specifies the IC1 Polarity - * This parmeter can be one of the following values: - * @arg TIM_ICPolarity_Falling: IC Falling edge. - * @arg TIM_ICPolarity_Rising: IC Rising edge. - * @param TIM_IC2Polarity: specifies the IC2 Polarity - * This parmeter can be one of the following values: - * @arg TIM_ICPolarity_Falling: IC Falling edge. - * @arg TIM_ICPolarity_Rising: IC Rising edge. - * @retval None - */ -void TIM_EncoderInterfaceConfig(TIM_TypeDef* TIMx, uint16_t TIM_EncoderMode, - uint16_t TIM_IC1Polarity, uint16_t TIM_IC2Polarity) -{ - uint16_t tmpsmcr = 0; - uint16_t tmpccmr1 = 0; - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_ENCODER_MODE(TIM_EncoderMode)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC1Polarity)); - assert_param(IS_TIM_IC_POLARITY(TIM_IC2Polarity)); - - /* Get the TIMx SMCR register value */ - tmpsmcr = TIMx->SMCR; - - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - - /* Get the TIMx CCER register value */ - tmpccer = TIMx->CCER; - - /* Set the encoder Mode */ - tmpsmcr &= SMCR_SMS_Mask; - tmpsmcr |= TIM_EncoderMode; - - /* Select the Capture Compare 1 and the Capture Compare 2 as input */ - tmpccmr1 &= CCMR_CC13S_Mask & CCMR_CC24S_Mask; - tmpccmr1 |= CCMR_TI13Direct_Set | CCMR_TI24Direct_Set; - - /* Set the TI1 and the TI2 Polarities */ - tmpccer &= CCER_CC1P_Reset & CCER_CC2P_Reset; - tmpccer |= (uint16_t)(TIM_IC1Polarity | (uint16_t)(TIM_IC2Polarity << (uint16_t)4)); - - /* Write to TIMx SMCR */ - TIMx->SMCR = tmpsmcr; - - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; - - /* Write to TIMx CCER */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Forces the TIMx output 1 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC1REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC1REF. - * @retval None - */ -void TIM_ForcedOC1Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1M Bits */ - tmpccmr1 &= CCMR_OC13M_Mask; - /* Configure The Forced output Mode */ - tmpccmr1 |= TIM_ForcedAction; - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Forces the TIMx output 2 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC2REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC2REF. - * @retval None - */ -void TIM_ForcedOC2Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2M Bits */ - tmpccmr1 &= CCMR_OC24M_Mask; - /* Configure The Forced output Mode */ - tmpccmr1 |= (uint16_t)(TIM_ForcedAction << 8); - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Forces the TIMx output 3 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC3REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC3REF. - * @retval None - */ -void TIM_ForcedOC3Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC1M Bits */ - tmpccmr2 &= CCMR_OC13M_Mask; - /* Configure The Forced output Mode */ - tmpccmr2 |= TIM_ForcedAction; - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Forces the TIMx output 4 waveform to active or inactive level. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ForcedAction: specifies the forced Action to be set to the output waveform. - * This parameter can be one of the following values: - * @arg TIM_ForcedAction_Active: Force active level on OC4REF - * @arg TIM_ForcedAction_InActive: Force inactive level on OC4REF. - * @retval None - */ -void TIM_ForcedOC4Config(TIM_TypeDef* TIMx, uint16_t TIM_ForcedAction) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_FORCED_ACTION(TIM_ForcedAction)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC2M Bits */ - tmpccmr2 &= CCMR_OC24M_Mask; - /* Configure The Forced output Mode */ - tmpccmr2 |= (uint16_t)(TIM_ForcedAction << 8); - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Enables or disables TIMx peripheral Preload register on ARR. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param NewState: new state of the TIMx peripheral Preload register - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_ARRPreloadConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the ARR Preload Bit */ - TIMx->CR1 |= CR1_ARPE_Set; - } - else - { - /* Reset the ARR Preload Bit */ - TIMx->CR1 &= CR1_ARPE_Reset; - } -} - -/** - * @brief Selects the TIM peripheral Commutation event. - * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral - * @param NewState: new state of the Commutation event. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectCOM(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the COM Bit */ - TIMx->CR2 |= CR2_CCUS_Set; - } - else - { - /* Reset the COM Bit */ - TIMx->CR2 &= CR2_CCUS_Reset; - } -} - -/** - * @brief Selects the TIMx peripheral Capture Compare DMA source. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param NewState: new state of the Capture Compare DMA source - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectCCDMA(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the CCDS Bit */ - TIMx->CR2 |= CR2_CCDS_Set; - } - else - { - /* Reset the CCDS Bit */ - TIMx->CR2 &= CR2_CCDS_Reset; - } -} - -/** - * @brief Sets or Resets the TIM peripheral Capture Compare Preload Control bit. - * @param TIMx: where x can be 1 or 8 to select the TIMx peripheral - * @param NewState: new state of the Capture Compare Preload Control bit - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_CCPreloadControl(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the CCPC Bit */ - TIMx->CR2 |= CR2_CCPC_Set; - } - else - { - /* Reset the CCPC Bit */ - TIMx->CR2 &= CR2_CCPC_Reset; - } -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR1. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC1PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1PE Bit */ - tmpccmr1 &= CCMR_OC13PE_Reset; - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= TIM_OCPreload; - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR2. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC2PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2PE Bit */ - tmpccmr1 &= CCMR_OC24PE_Reset; - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr1 |= (uint16_t)(TIM_OCPreload << 8); - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR3. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC3PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC3PE Bit */ - tmpccmr2 &= CCMR_OC13PE_Reset; - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= TIM_OCPreload; - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Enables or disables the TIMx peripheral Preload register on CCR4. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPreload: new state of the TIMx peripheral Preload register - * This parameter can be one of the following values: - * @arg TIM_OCPreload_Enable - * @arg TIM_OCPreload_Disable - * @retval None - */ -void TIM_OC4PreloadConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPreload) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCPRELOAD_STATE(TIM_OCPreload)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC4PE Bit */ - tmpccmr2 &= CCMR_OC24PE_Reset; - /* Enable or Disable the Output Compare Preload feature */ - tmpccmr2 |= (uint16_t)(TIM_OCPreload << 8); - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx Output Compare 1 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC1FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1FE Bit */ - tmpccmr1 &= CCMR_OC13FE_Reset; - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= TIM_OCFast; - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Configures the TIMx Output Compare 2 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC2FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR1 register value */ - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2FE Bit */ - tmpccmr1 &= CCMR_OC24FE_Reset; - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr1 |= (uint16_t)(TIM_OCFast << 8); - /* Write to TIMx CCMR1 */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Configures the TIMx Output Compare 3 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC3FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC3FE Bit */ - tmpccmr2 &= CCMR_OC13FE_Reset; - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= TIM_OCFast; - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx Output Compare 4 Fast feature. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCFast: new state of the Output Compare Fast Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCFast_Enable: TIM output compare fast enable - * @arg TIM_OCFast_Disable: TIM output compare fast disable - * @retval None - */ -void TIM_OC4FastConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCFast) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCFAST_STATE(TIM_OCFast)); - /* Get the TIMx CCMR2 register value */ - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC4FE Bit */ - tmpccmr2 &= CCMR_OC24FE_Reset; - /* Enable or Disable the Output Compare Fast Bit */ - tmpccmr2 |= (uint16_t)(TIM_OCFast << 8); - /* Write to TIMx CCMR2 */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Clears or safeguards the OCREF1 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC1Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC1CE Bit */ - tmpccmr1 &= CCMR_OC13CE_Reset; - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= TIM_OCClear; - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Clears or safeguards the OCREF2 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC2Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr1 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr1 = TIMx->CCMR1; - /* Reset the OC2CE Bit */ - tmpccmr1 &= CCMR_OC24CE_Reset; - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr1 |= (uint16_t)(TIM_OCClear << 8); - /* Write to TIMx CCMR1 register */ - TIMx->CCMR1 = tmpccmr1; -} - -/** - * @brief Clears or safeguards the OCREF3 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC3Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC3CE Bit */ - tmpccmr2 &= CCMR_OC13CE_Reset; - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= TIM_OCClear; - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Clears or safeguards the OCREF4 signal on an external event - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCClear: new state of the Output Compare Clear Enable Bit. - * This parameter can be one of the following values: - * @arg TIM_OCClear_Enable: TIM Output clear enable - * @arg TIM_OCClear_Disable: TIM Output clear disable - * @retval None - */ -void TIM_ClearOC4Ref(TIM_TypeDef* TIMx, uint16_t TIM_OCClear) -{ - uint16_t tmpccmr2 = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OCCLEAR_STATE(TIM_OCClear)); - tmpccmr2 = TIMx->CCMR2; - /* Reset the OC4CE Bit */ - tmpccmr2 &= CCMR_OC24CE_Reset; - /* Enable or Disable the Output Compare Clear Bit */ - tmpccmr2 |= (uint16_t)(TIM_OCClear << 8); - /* Write to TIMx CCMR2 register */ - TIMx->CCMR2 = tmpccmr2; -} - -/** - * @brief Configures the TIMx channel 1 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC1 Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC1PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC1P Bit */ - tmpccer &= CCER_CC1P_Reset; - tmpccer |= TIM_OCPolarity; - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 1N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC1N Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC1NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - /* Set or Reset the CC1NP Bit */ - tmpccer &= CCER_CC1NP_Reset; - tmpccer |= TIM_OCNPolarity; - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 2 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC2 Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC2PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC2P Bit */ - tmpccer &= CCER_CC2P_Reset; - tmpccer |= (uint16_t)(TIM_OCPolarity << 4); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 2N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC2N Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC2NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - /* Set or Reset the CC2NP Bit */ - tmpccer &= CCER_CC2NP_Reset; - tmpccer |= (uint16_t)(TIM_OCNPolarity << 4); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 3 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC3 Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC3PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC3P Bit */ - tmpccer &= CCER_CC3P_Reset; - tmpccer |= (uint16_t)(TIM_OCPolarity << 8); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx Channel 3N polarity. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_OCNPolarity: specifies the OC3N Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCNPolarity_High: Output Compare active high - * @arg TIM_OCNPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC3NPolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCNPolarity) -{ - uint16_t tmpccer = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_OCN_POLARITY(TIM_OCNPolarity)); - - tmpccer = TIMx->CCER; - /* Set or Reset the CC3NP Bit */ - tmpccer &= CCER_CC3NP_Reset; - tmpccer |= (uint16_t)(TIM_OCNPolarity << 8); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Configures the TIMx channel 4 polarity. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_OCPolarity: specifies the OC4 Polarity - * This parmeter can be one of the following values: - * @arg TIM_OCPolarity_High: Output Compare active high - * @arg TIM_OCPolarity_Low: Output Compare active low - * @retval None - */ -void TIM_OC4PolarityConfig(TIM_TypeDef* TIMx, uint16_t TIM_OCPolarity) -{ - uint16_t tmpccer = 0; - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_OC_POLARITY(TIM_OCPolarity)); - tmpccer = TIMx->CCER; - /* Set or Reset the CC4P Bit */ - tmpccer &= CCER_CC4P_Reset; - tmpccer |= (uint16_t)(TIM_OCPolarity << 12); - /* Write to TIMx CCER register */ - TIMx->CCER = tmpccer; -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel x. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parmeter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @arg TIM_Channel_4: TIM Channel 4 - * @param TIM_CCx: specifies the TIM Channel CCxE bit new state. - * This parameter can be: TIM_CCx_Enable or TIM_CCx_Disable. - * @retval None - */ -void TIM_CCxCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCx) -{ - uint16_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCX(TIM_CCx)); - - tmp = CCER_CCE_Set << TIM_Channel; - - /* Reset the CCxE Bit */ - TIMx->CCER &= (uint16_t)~ tmp; - - /* Set or reset the CCxE Bit */ - TIMx->CCER |= (uint16_t)(TIM_CCx << TIM_Channel); -} - -/** - * @brief Enables or disables the TIM Capture Compare Channel xN. - * @param TIMx: where x can be 1 or 8 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parmeter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @param TIM_CCxN: specifies the TIM Channel CCxNE bit new state. - * This parameter can be: TIM_CCxN_Enable or TIM_CCxN_Disable. - * @retval None - */ -void TIM_CCxNCmd(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_CCxN) -{ - uint16_t tmp = 0; - - /* Check the parameters */ - assert_param(IS_TIM_18_PERIPH(TIMx)); - assert_param(IS_TIM_COMPLEMENTARY_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_CCXN(TIM_CCxN)); - - tmp = CCER_CCNE_Set << TIM_Channel; - - /* Reset the CCxNE Bit */ - TIMx->CCER &= (uint16_t) ~tmp; - - /* Set or reset the CCxNE Bit */ - TIMx->CCER |= (uint16_t)(TIM_CCxN << TIM_Channel); -} - -/** - * @brief Selects the TIM Ouput Compare Mode. - * @note This function disables the selected channel before changing the Ouput - * Compare Mode. - * User has to enable this channel using TIM_CCxCmd and TIM_CCxNCmd functions. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_Channel: specifies the TIM Channel - * This parmeter can be one of the following values: - * @arg TIM_Channel_1: TIM Channel 1 - * @arg TIM_Channel_2: TIM Channel 2 - * @arg TIM_Channel_3: TIM Channel 3 - * @arg TIM_Channel_4: TIM Channel 4 - * @param TIM_OCMode: specifies the TIM Output Compare Mode. - * This paramter can be one of the following values: - * @arg TIM_OCMode_Timing - * @arg TIM_OCMode_Active - * @arg TIM_OCMode_Toggle - * @arg TIM_OCMode_PWM1 - * @arg TIM_OCMode_PWM2 - * @arg TIM_ForcedAction_Active - * @arg TIM_ForcedAction_InActive - * @retval None - */ -void TIM_SelectOCxM(TIM_TypeDef* TIMx, uint16_t TIM_Channel, uint16_t TIM_OCMode) -{ - uint32_t tmp = 0; - uint16_t tmp1 = 0; - - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CHANNEL(TIM_Channel)); - assert_param(IS_TIM_OCM(TIM_OCMode)); - - tmp = (uint32_t) TIMx; - tmp += CCMR_Offset; - - tmp1 = CCER_CCE_Set << (uint16_t)TIM_Channel; - - /* Disable the Channel: Reset the CCxE Bit */ - TIMx->CCER &= (uint16_t) ~tmp1; - - if((TIM_Channel == TIM_Channel_1) ||(TIM_Channel == TIM_Channel_3)) - { - tmp += (TIM_Channel>>1); - - /* Reset the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp &= CCMR_OC13M_Mask; - - /* Configure the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp |= TIM_OCMode; - } - else - { - tmp += (uint16_t)(TIM_Channel - (uint16_t)4)>> (uint16_t)1; - - /* Reset the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp &= CCMR_OC24M_Mask; - - /* Configure the OCxM bits in the CCMRx register */ - *(__IO uint32_t *) tmp |= (uint16_t)(TIM_OCMode << 8); - } -} - -/** - * @brief Enables or Disables the TIMx Update event. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param NewState: new state of the TIMx UDIS bit - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_UpdateDisableConfig(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the Update Disable Bit */ - TIMx->CR1 |= CR1_UDIS_Set; - } - else - { - /* Reset the Update Disable Bit */ - TIMx->CR1 &= CR1_UDIS_Reset; - } -} - -/** - * @brief Configures the TIMx Update Request Interrupt source. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_UpdateSource: specifies the Update source. - * This parameter can be one of the following values: - * @arg TIM_UpdateSource_Regular: Source of update is the counter overflow/underflow - or the setting of UG bit, or an update generation - through the slave mode controller. - * @arg TIM_UpdateSource_Global: Source of update is counter overflow/underflow. - * @retval None - */ -void TIM_UpdateRequestConfig(TIM_TypeDef* TIMx, uint16_t TIM_UpdateSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_UPDATE_SOURCE(TIM_UpdateSource)); - if (TIM_UpdateSource != TIM_UpdateSource_Global) - { - /* Set the URS Bit */ - TIMx->CR1 |= CR1_URS_Set; - } - else - { - /* Reset the URS Bit */ - TIMx->CR1 &= CR1_URS_Reset; - } -} - -/** - * @brief Enables or disables the TIMx’s Hall sensor interface. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param NewState: new state of the TIMx Hall sensor interface. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void TIM_SelectHallSensor(TIM_TypeDef* TIMx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Set the TI1S Bit */ - TIMx->CR2 |= CR2_TI1S_Set; - } - else - { - /* Reset the TI1S Bit */ - TIMx->CR2 &= CR2_TI1S_Reset; - } -} - -/** - * @brief Selects the TIMx’s One Pulse Mode. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_OPMode: specifies the OPM Mode to be used. - * This parameter can be one of the following values: - * @arg TIM_OPMode_Single - * @arg TIM_OPMode_Repetitive - * @retval None - */ -void TIM_SelectOnePulseMode(TIM_TypeDef* TIMx, uint16_t TIM_OPMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_OPM_MODE(TIM_OPMode)); - /* Reset the OPM Bit */ - TIMx->CR1 &= CR1_OPM_Reset; - /* Configure the OPM Mode */ - TIMx->CR1 |= TIM_OPMode; -} - -/** - * @brief Selects the TIMx Trigger Output Mode. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_TRGOSource: specifies the Trigger Output source. - * This paramter can be one of the following values: - * - * - For all TIMx - * @arg TIM_TRGOSource_Reset: The UG bit in the TIM_EGR register is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_Enable: The Counter Enable CEN is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_Update: The update event is selected as the trigger output (TRGO). - * - * - For all TIMx except TIM6 and TIM7 - * @arg TIM_TRGOSource_OC1: The trigger output sends a positive pulse when the CC1IF flag - * is to be set, as soon as a capture or compare match occurs (TRGO). - * @arg TIM_TRGOSource_OC1Ref: OC1REF signal is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_OC2Ref: OC2REF signal is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_OC3Ref: OC3REF signal is used as the trigger output (TRGO). - * @arg TIM_TRGOSource_OC4Ref: OC4REF signal is used as the trigger output (TRGO). - * - * @retval None - */ -void TIM_SelectOutputTrigger(TIM_TypeDef* TIMx, uint16_t TIM_TRGOSource) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_TRGO_SOURCE(TIM_TRGOSource)); - /* Reset the MMS Bits */ - TIMx->CR2 &= CR2_MMS_Mask; - /* Select the TRGO source */ - TIMx->CR2 |= TIM_TRGOSource; -} - -/** - * @brief Selects the TIMx Slave Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_SlaveMode: specifies the Timer Slave Mode. - * This paramter can be one of the following values: - * @arg TIM_SlaveMode_Reset: Rising edge of the selected trigger signal (TRGI) re-initializes - * the counter and triggers an update of the registers. - * @arg TIM_SlaveMode_Gated: The counter clock is enabled when the trigger signal (TRGI) is high. - * @arg TIM_SlaveMode_Trigger: The counter starts at a rising edge of the trigger TRGI. - * @arg TIM_SlaveMode_External1: Rising edges of the selected trigger (TRGI) clock the counter. - * @retval None - */ -void TIM_SelectSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_SlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_SLAVE_MODE(TIM_SlaveMode)); - /* Reset the SMS Bits */ - TIMx->SMCR &= SMCR_SMS_Mask; - /* Select the Slave Mode */ - TIMx->SMCR |= TIM_SlaveMode; -} - -/** - * @brief Sets or Resets the TIMx Master/Slave Mode. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_MasterSlaveMode: specifies the Timer Master Slave Mode. - * This paramter can be one of the following values: - * @arg TIM_MasterSlaveMode_Enable: synchronization between the current timer - * and its slaves (through TRGO). - * @arg TIM_MasterSlaveMode_Disable: No action - * @retval None - */ -void TIM_SelectMasterSlaveMode(TIM_TypeDef* TIMx, uint16_t TIM_MasterSlaveMode) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_MSM_STATE(TIM_MasterSlaveMode)); - /* Reset the MSM Bit */ - TIMx->SMCR &= SMCR_MSM_Reset; - - /* Set or Reset the MSM Bit */ - TIMx->SMCR |= TIM_MasterSlaveMode; -} - -/** - * @brief Sets the TIMx Counter Register value - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param Counter: specifies the Counter register new value. - * @retval None - */ -void TIM_SetCounter(TIM_TypeDef* TIMx, uint16_t Counter) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Set the Counter Register value */ - TIMx->CNT = Counter; -} - -/** - * @brief Sets the TIMx Autoreload Register value - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param Autoreload: specifies the Autoreload register new value. - * @retval None - */ -void TIM_SetAutoreload(TIM_TypeDef* TIMx, uint16_t Autoreload) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Set the Autoreload Register value */ - TIMx->ARR = Autoreload; -} - -/** - * @brief Sets the TIMx Capture Compare1 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare1: specifies the Capture Compare1 register new value. - * @retval None - */ -void TIM_SetCompare1(TIM_TypeDef* TIMx, uint16_t Compare1) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Set the Capture Compare1 Register value */ - TIMx->CCR1 = Compare1; -} - -/** - * @brief Sets the TIMx Capture Compare2 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare2: specifies the Capture Compare2 register new value. - * @retval None - */ -void TIM_SetCompare2(TIM_TypeDef* TIMx, uint16_t Compare2) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Set the Capture Compare2 Register value */ - TIMx->CCR2 = Compare2; -} - -/** - * @brief Sets the TIMx Capture Compare3 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare3: specifies the Capture Compare3 register new value. - * @retval None - */ -void TIM_SetCompare3(TIM_TypeDef* TIMx, uint16_t Compare3) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Set the Capture Compare3 Register value */ - TIMx->CCR3 = Compare3; -} - -/** - * @brief Sets the TIMx Capture Compare4 Register value - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param Compare4: specifies the Capture Compare4 register new value. - * @retval None - */ -void TIM_SetCompare4(TIM_TypeDef* TIMx, uint16_t Compare4) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Set the Capture Compare4 Register value */ - TIMx->CCR4 = Compare4; -} - -/** - * @brief Sets the TIMx Input Capture 1 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture1 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC1Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC1PSC Bits */ - TIMx->CCMR1 &= CCMR_IC13PSC_Mask; - /* Set the IC1PSC value */ - TIMx->CCMR1 |= TIM_ICPSC; -} - -/** - * @brief Sets the TIMx Input Capture 2 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture2 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC2Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC2PSC Bits */ - TIMx->CCMR1 &= CCMR_IC24PSC_Mask; - /* Set the IC2PSC value */ - TIMx->CCMR1 |= (uint16_t)(TIM_ICPSC << 8); -} - -/** - * @brief Sets the TIMx Input Capture 3 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture3 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC3Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC3PSC Bits */ - TIMx->CCMR2 &= CCMR_IC13PSC_Mask; - /* Set the IC3PSC value */ - TIMx->CCMR2 |= TIM_ICPSC; -} - -/** - * @brief Sets the TIMx Input Capture 4 prescaler. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPSC: specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -void TIM_SetIC4Prescaler(TIM_TypeDef* TIMx, uint16_t TIM_ICPSC) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_IC_PRESCALER(TIM_ICPSC)); - /* Reset the IC4PSC Bits */ - TIMx->CCMR2 &= CCMR_IC24PSC_Mask; - /* Set the IC4PSC value */ - TIMx->CCMR2 |= (uint16_t)(TIM_ICPSC << 8); -} - -/** - * @brief Sets the TIMx Clock Division value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_CKD: specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CKD_DIV1: TDTS = Tck_tim - * @arg TIM_CKD_DIV2: TDTS = 2*Tck_tim - * @arg TIM_CKD_DIV4: TDTS = 4*Tck_tim - * @retval None - */ -void TIM_SetClockDivision(TIM_TypeDef* TIMx, uint16_t TIM_CKD) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - assert_param(IS_TIM_CKD_DIV(TIM_CKD)); - /* Reset the CKD Bits */ - TIMx->CR1 &= CR1_CKD_Mask; - /* Set the CKD value */ - TIMx->CR1 |= TIM_CKD; -} - -/** - * @brief Gets the TIMx Input Capture 1 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 1 Register value. - */ -uint16_t TIM_GetCapture1(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Get the Capture 1 Register value */ - return TIMx->CCR1; -} - -/** - * @brief Gets the TIMx Input Capture 2 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 2 Register value. - */ -uint16_t TIM_GetCapture2(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Get the Capture 2 Register value */ - return TIMx->CCR2; -} - -/** - * @brief Gets the TIMx Input Capture 3 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 3 Register value. - */ -uint16_t TIM_GetCapture3(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Get the Capture 3 Register value */ - return TIMx->CCR3; -} - -/** - * @brief Gets the TIMx Input Capture 4 value. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @retval Capture Compare 4 Register value. - */ -uint16_t TIM_GetCapture4(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_123458_PERIPH(TIMx)); - /* Get the Capture 4 Register value */ - return TIMx->CCR4; -} - -/** - * @brief Gets the TIMx Counter value. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @retval Counter Register value. - */ -uint16_t TIM_GetCounter(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Get the Counter Register value */ - return TIMx->CNT; -} - -/** - * @brief Gets the TIMx Prescaler value. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @retval Prescaler Register value. - */ -uint16_t TIM_GetPrescaler(TIM_TypeDef* TIMx) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - /* Get the Prescaler Register value */ - return TIMx->PSC; -} - -/** - * @brief Checks whether the specified TIM flag is set or not. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg TIM_FLAG_Update: TIM update Flag - * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag - * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag - * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag - * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag - * @arg TIM_FLAG_COM: TIM Commutation Flag - * @arg TIM_FLAG_Trigger: TIM Trigger Flag - * @arg TIM_FLAG_Break: TIM Break Flag - * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag - * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag - * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag - * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag - * @note - * - TIM6 and TIM7 can have only one update flag. - * - TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8. - * @retval The new state of TIM_FLAG (SET or RESET). - */ -FlagStatus TIM_GetFlagStatus(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) -{ - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_FLAG(TIM_FLAG)); - - if ((TIMx->SR & TIM_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the TIMx's pending flags. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_FLAG: specifies the flag bit to clear. - * This parameter can be any combination of the following values: - * @arg TIM_FLAG_Update: TIM update Flag - * @arg TIM_FLAG_CC1: TIM Capture Compare 1 Flag - * @arg TIM_FLAG_CC2: TIM Capture Compare 2 Flag - * @arg TIM_FLAG_CC3: TIM Capture Compare 3 Flag - * @arg TIM_FLAG_CC4: TIM Capture Compare 4 Flag - * @arg TIM_FLAG_COM: TIM Commutation Flag - * @arg TIM_FLAG_Trigger: TIM Trigger Flag - * @arg TIM_FLAG_Break: TIM Break Flag - * @arg TIM_FLAG_CC1OF: TIM Capture Compare 1 overcapture Flag - * @arg TIM_FLAG_CC2OF: TIM Capture Compare 2 overcapture Flag - * @arg TIM_FLAG_CC3OF: TIM Capture Compare 3 overcapture Flag - * @arg TIM_FLAG_CC4OF: TIM Capture Compare 4 overcapture Flag - * @note - * - TIM6 and TIM7 can have only one update flag. - * - TIM_FLAG_COM and TIM_FLAG_Break are used only with TIM1 and TIM8. - * @retval None - */ -void TIM_ClearFlag(TIM_TypeDef* TIMx, uint16_t TIM_FLAG) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_CLEAR_FLAG(TIM_FLAG)); - - /* Clear the flags */ - TIMx->SR = (uint16_t)~TIM_FLAG; -} - -/** - * @brief Checks whether the TIM interrupt has occurred or not. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_IT: specifies the TIM interrupt source to check. - * This parameter can be one of the following values: - * @arg TIM_IT_Update: TIM update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * @note - * - TIM6 and TIM7 can generate only an update interrupt. - * - TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. - * @retval The new state of the TIM_IT(SET or RESET). - */ -ITStatus TIM_GetITStatus(TIM_TypeDef* TIMx, uint16_t TIM_IT) -{ - ITStatus bitstatus = RESET; - uint16_t itstatus = 0x0, itenable = 0x0; - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_GET_IT(TIM_IT)); - - itstatus = TIMx->SR & TIM_IT; - - itenable = TIMx->DIER & TIM_IT; - if ((itstatus != (uint16_t)RESET) && (itenable != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the TIMx's interrupt pending bits. - * @param TIMx: where x can be 1 to 8 to select the TIM peripheral. - * @param TIM_IT: specifies the pending bit to clear. - * This parameter can be any combination of the following values: - * @arg TIM_IT_Update: TIM1 update Interrupt source - * @arg TIM_IT_CC1: TIM Capture Compare 1 Interrupt source - * @arg TIM_IT_CC2: TIM Capture Compare 2 Interrupt source - * @arg TIM_IT_CC3: TIM Capture Compare 3 Interrupt source - * @arg TIM_IT_CC4: TIM Capture Compare 4 Interrupt source - * @arg TIM_IT_COM: TIM Commutation Interrupt source - * @arg TIM_IT_Trigger: TIM Trigger Interrupt source - * @arg TIM_IT_Break: TIM Break Interrupt source - * @note - * - TIM6 and TIM7 can generate only an update interrupt. - * - TIM_IT_COM and TIM_IT_Break are used only with TIM1 and TIM8. - * @retval None - */ -void TIM_ClearITPendingBit(TIM_TypeDef* TIMx, uint16_t TIM_IT) -{ - /* Check the parameters */ - assert_param(IS_TIM_ALL_PERIPH(TIMx)); - assert_param(IS_TIM_IT(TIM_IT)); - /* Clear the IT pending Bit */ - TIMx->SR = (uint16_t)~TIM_IT; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1. - * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2. - * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI1_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr1 = 0, tmpccer = 0; - /* Disable the Channel 1: Reset the CC1E Bit */ - TIMx->CCER &= CCER_CC1E_Reset; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - /* Select the Input and set the filter */ - tmpccmr1 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; - tmpccmr1 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); - /* Select the Polarity and set the CC1E Bit */ - tmpccer &= CCER_CC1P_Reset; - tmpccer |= (uint16_t)(TIM_ICPolarity | (uint16_t)CCER_CC1E_Set); - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI2 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2. - * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1. - * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI2_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr1 = 0, tmpccer = 0, tmp = 0; - /* Disable the Channel 2: Reset the CC2E Bit */ - TIMx->CCER &= CCER_CC2E_Reset; - tmpccmr1 = TIMx->CCMR1; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 4); - /* Select the Input and set the filter */ - tmpccmr1 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; - tmpccmr1 |= (uint16_t)(TIM_ICFilter << 12); - tmpccmr1 |= (uint16_t)(TIM_ICSelection << 8); - /* Select the Polarity and set the CC2E Bit */ - tmpccer &= CCER_CC2P_Reset; - tmpccer |= (uint16_t)(tmp | (uint16_t)CCER_CC2E_Set); - /* Write to TIMx CCMR1 and CCER registers */ - TIMx->CCMR1 = tmpccmr1 ; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI3 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3. - * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4. - * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI3_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; - /* Disable the Channel 3: Reset the CC3E Bit */ - TIMx->CCER &= CCER_CC3E_Reset; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 8); - /* Select the Input and set the filter */ - tmpccmr2 &= CCMR_CC13S_Mask & CCMR_IC13F_Mask; - tmpccmr2 |= (uint16_t)(TIM_ICSelection | (uint16_t)(TIM_ICFilter << (uint16_t)4)); - /* Select the Polarity and set the CC3E Bit */ - tmpccer &= CCER_CC3P_Reset; - tmpccer |= (uint16_t)(tmp | (uint16_t)CCER_CC3E_Set); - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer; -} - -/** - * @brief Configure the TI1 as Input. - * @param TIMx: where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral. - * @param TIM_ICPolarity : The Input Polarity. - * This parameter can be one of the following values: - * @arg TIM_ICPolarity_Rising - * @arg TIM_ICPolarity_Falling - * @param TIM_ICSelection: specifies the input to be used. - * This parameter can be one of the following values: - * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4. - * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3. - * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC. - * @param TIM_ICFilter: Specifies the Input Capture Filter. - * This parameter must be a value between 0x00 and 0x0F. - * @retval None - */ -static void TI4_Config(TIM_TypeDef* TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, - uint16_t TIM_ICFilter) -{ - uint16_t tmpccmr2 = 0, tmpccer = 0, tmp = 0; - - /* Disable the Channel 4: Reset the CC4E Bit */ - TIMx->CCER &= CCER_CC4E_Reset; - tmpccmr2 = TIMx->CCMR2; - tmpccer = TIMx->CCER; - tmp = (uint16_t)(TIM_ICPolarity << 12); - - /* Select the Input and set the filter */ - tmpccmr2 &= CCMR_CC24S_Mask & CCMR_IC24F_Mask; - tmpccmr2 |= (uint16_t)(TIM_ICSelection << 8); - tmpccmr2 |= (uint16_t)(TIM_ICFilter << 12); - - /* Select the Polarity and set the CC4E Bit */ - tmpccer &= CCER_CC4P_Reset; - tmpccer |= (uint16_t)(tmp | (uint16_t)CCER_CC4E_Set); - /* Write to TIMx CCMR2 and CCER registers */ - TIMx->CCMR2 = tmpccmr2; - TIMx->CCER = tmpccer ; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c deleted file mode 100644 index 43fcb784e..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_usart.c +++ /dev/null @@ -1,967 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_usart.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the USART firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_usart.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup USART - * @brief USART driver modules - * @{ - */ - -/** @defgroup USART_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_Defines - * @{ - */ - -#define CR1_UE_Set ((uint16_t)0x2000) /*!< USART Enable Mask */ -#define CR1_UE_Reset ((uint16_t)0xDFFF) /*!< USART Disable Mask */ - -#define CR1_WAKE_Mask ((uint16_t)0xF7FF) /*!< USART WakeUp Method Mask */ - -#define CR1_RWU_Set ((uint16_t)0x0002) /*!< USART mute mode Enable Mask */ -#define CR1_RWU_Reset ((uint16_t)0xFFFD) /*!< USART mute mode Enable Mask */ -#define CR1_SBK_Set ((uint16_t)0x0001) /*!< USART Break Character send Mask */ -#define CR1_CLEAR_Mask ((uint16_t)0xE9F3) /*!< USART CR1 Mask */ -#define CR2_Address_Mask ((uint16_t)0xFFF0) /*!< USART address Mask */ - -#define CR2_LINEN_Set ((uint16_t)0x4000) /*!< USART LIN Enable Mask */ -#define CR2_LINEN_Reset ((uint16_t)0xBFFF) /*!< USART LIN Disable Mask */ - -#define CR2_LBDL_Mask ((uint16_t)0xFFDF) /*!< USART LIN Break detection Mask */ -#define CR2_STOP_CLEAR_Mask ((uint16_t)0xCFFF) /*!< USART CR2 STOP Bits Mask */ -#define CR2_CLOCK_CLEAR_Mask ((uint16_t)0xF0FF) /*!< USART CR2 Clock Mask */ - -#define CR3_SCEN_Set ((uint16_t)0x0020) /*!< USART SC Enable Mask */ -#define CR3_SCEN_Reset ((uint16_t)0xFFDF) /*!< USART SC Disable Mask */ - -#define CR3_NACK_Set ((uint16_t)0x0010) /*!< USART SC NACK Enable Mask */ -#define CR3_NACK_Reset ((uint16_t)0xFFEF) /*!< USART SC NACK Disable Mask */ - -#define CR3_HDSEL_Set ((uint16_t)0x0008) /*!< USART Half-Duplex Enable Mask */ -#define CR3_HDSEL_Reset ((uint16_t)0xFFF7) /*!< USART Half-Duplex Disable Mask */ - -#define CR3_IRLP_Mask ((uint16_t)0xFFFB) /*!< USART IrDA LowPower mode Mask */ -#define CR3_CLEAR_Mask ((uint16_t)0xFCFF) /*!< USART CR3 Mask */ - -#define CR3_IREN_Set ((uint16_t)0x0002) /*!< USART IrDA Enable Mask */ -#define CR3_IREN_Reset ((uint16_t)0xFFFD) /*!< USART IrDA Disable Mask */ -#define GTPR_LSB_Mask ((uint16_t)0x00FF) /*!< Guard Time Register LSB Mask */ -#define GTPR_MSB_Mask ((uint16_t)0xFF00) /*!< Guard Time Register MSB Mask */ -#define IT_Mask ((uint16_t)0x001F) /*!< USART Interrupt Mask */ - -/** - * @} - */ - -/** @defgroup USART_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup USART_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the USARTx peripheral registers to their default reset values. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: USART1, USART2, USART3, UART4 or UART5. - * @retval None - */ -void USART_DeInit(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - if (USARTx == USART1) - { - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, ENABLE); - RCC_APB2PeriphResetCmd(RCC_APB2Periph_USART1, DISABLE); - } - else if (USARTx == USART2) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART2, DISABLE); - } - else if (USARTx == USART3) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_USART3, DISABLE); - } - else if (USARTx == UART4) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART4, DISABLE); - } - else - { - if (USARTx == UART5) - { - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_UART5, DISABLE); - } - } -} - -/** - * @brief Initializes the USARTx peripheral according to the specified - * parameters in the USART_InitStruct . - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure - * that contains the configuration information for the specified USART peripheral. - * @retval None - */ -void USART_Init(USART_TypeDef* USARTx, USART_InitTypeDef* USART_InitStruct) -{ - uint32_t tmpreg = 0x00, apbclock = 0x00; - uint32_t integerdivider = 0x00; - uint32_t fractionaldivider = 0x00; - uint32_t usartxbase = 0; - RCC_ClocksTypeDef RCC_ClocksStatus; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_BAUDRATE(USART_InitStruct->USART_BaudRate)); - assert_param(IS_USART_WORD_LENGTH(USART_InitStruct->USART_WordLength)); - assert_param(IS_USART_STOPBITS(USART_InitStruct->USART_StopBits)); - assert_param(IS_USART_PARITY(USART_InitStruct->USART_Parity)); - assert_param(IS_USART_MODE(USART_InitStruct->USART_Mode)); - assert_param(IS_USART_HARDWARE_FLOW_CONTROL(USART_InitStruct->USART_HardwareFlowControl)); - /* The hardware flow control is available only for USART1, USART2 and USART3 */ - if (USART_InitStruct->USART_HardwareFlowControl != USART_HardwareFlowControl_None) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - usartxbase = (uint32_t)USARTx; - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear STOP[13:12] bits */ - tmpreg &= CR2_STOP_CLEAR_Mask; - /* Configure the USART Stop Bits, Clock, CPOL, CPHA and LastBit ------------*/ - /* Set STOP[13:12] bits according to USART_StopBits value */ - tmpreg |= (uint32_t)USART_InitStruct->USART_StopBits; - - /* Write to USART CR2 */ - USARTx->CR2 = (uint16_t)tmpreg; - -/*---------------------------- USART CR1 Configuration -----------------------*/ - tmpreg = USARTx->CR1; - /* Clear M, PCE, PS, TE and RE bits */ - tmpreg &= CR1_CLEAR_Mask; - /* Configure the USART Word Length, Parity and mode ----------------------- */ - /* Set the M bits according to USART_WordLength value */ - /* Set PCE and PS bits according to USART_Parity value */ - /* Set TE and RE bits according to USART_Mode value */ - tmpreg |= (uint32_t)USART_InitStruct->USART_WordLength | USART_InitStruct->USART_Parity | - USART_InitStruct->USART_Mode; - /* Write to USART CR1 */ - USARTx->CR1 = (uint16_t)tmpreg; - -/*---------------------------- USART CR3 Configuration -----------------------*/ - tmpreg = USARTx->CR3; - /* Clear CTSE and RTSE bits */ - tmpreg &= CR3_CLEAR_Mask; - /* Configure the USART HFC -------------------------------------------------*/ - /* Set CTSE and RTSE bits according to USART_HardwareFlowControl value */ - tmpreg |= USART_InitStruct->USART_HardwareFlowControl; - /* Write to USART CR3 */ - USARTx->CR3 = (uint16_t)tmpreg; - -/*---------------------------- USART BRR Configuration -----------------------*/ - /* Configure the USART Baud Rate -------------------------------------------*/ - RCC_GetClocksFreq(&RCC_ClocksStatus); - if (usartxbase == USART1_BASE) - { - apbclock = RCC_ClocksStatus.PCLK2_Frequency; - } - else - { - apbclock = RCC_ClocksStatus.PCLK1_Frequency; - } - /* Determine the integer part */ - integerdivider = ((0x19 * apbclock) / (0x04 * (USART_InitStruct->USART_BaudRate))); - tmpreg = (integerdivider / 0x64) << 0x04; - /* Determine the fractional part */ - fractionaldivider = integerdivider - (0x64 * (tmpreg >> 0x04)); - tmpreg |= ((((fractionaldivider * 0x10) + 0x32) / 0x64)) & ((uint8_t)0x0F); - /* Write to USART BRR */ - USARTx->BRR = (uint16_t)tmpreg; -} - -/** - * @brief Fills each USART_InitStruct member with its default value. - * @param USART_InitStruct: pointer to a USART_InitTypeDef structure - * which will be initialized. - * @retval None - */ -void USART_StructInit(USART_InitTypeDef* USART_InitStruct) -{ - /* USART_InitStruct members default value */ - USART_InitStruct->USART_BaudRate = 9600; - USART_InitStruct->USART_WordLength = USART_WordLength_8b; - USART_InitStruct->USART_StopBits = USART_StopBits_1; - USART_InitStruct->USART_Parity = USART_Parity_No ; - USART_InitStruct->USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_InitStruct->USART_HardwareFlowControl = USART_HardwareFlowControl_None; -} - -/** - * @brief Initializes the USARTx peripheral Clock according to the - * specified parameters in the USART_ClockInitStruct . - * @param USARTx: where x can be 1, 2, 3 to select the USART peripheral. - * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef - * structure that contains the configuration information for the specified - * USART peripheral. - * @note The Smart Card mode is not available for UART4 and UART5. - * @retval None - */ -void USART_ClockInit(USART_TypeDef* USARTx, USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - uint32_t tmpreg = 0x00; - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_USART_CLOCK(USART_ClockInitStruct->USART_Clock)); - assert_param(IS_USART_CPOL(USART_ClockInitStruct->USART_CPOL)); - assert_param(IS_USART_CPHA(USART_ClockInitStruct->USART_CPHA)); - assert_param(IS_USART_LASTBIT(USART_ClockInitStruct->USART_LastBit)); - -/*---------------------------- USART CR2 Configuration -----------------------*/ - tmpreg = USARTx->CR2; - /* Clear CLKEN, CPOL, CPHA and LBCL bits */ - tmpreg &= CR2_CLOCK_CLEAR_Mask; - /* Configure the USART Clock, CPOL, CPHA and LastBit ------------*/ - /* Set CLKEN bit according to USART_Clock value */ - /* Set CPOL bit according to USART_CPOL value */ - /* Set CPHA bit according to USART_CPHA value */ - /* Set LBCL bit according to USART_LastBit value */ - tmpreg |= (uint32_t)USART_ClockInitStruct->USART_Clock | USART_ClockInitStruct->USART_CPOL | - USART_ClockInitStruct->USART_CPHA | USART_ClockInitStruct->USART_LastBit; - /* Write to USART CR2 */ - USARTx->CR2 = (uint16_t)tmpreg; -} - -/** - * @brief Fills each USART_ClockInitStruct member with its default value. - * @param USART_ClockInitStruct: pointer to a USART_ClockInitTypeDef - * structure which will be initialized. - * @retval None - */ -void USART_ClockStructInit(USART_ClockInitTypeDef* USART_ClockInitStruct) -{ - /* USART_ClockInitStruct members default value */ - USART_ClockInitStruct->USART_Clock = USART_Clock_Disable; - USART_ClockInitStruct->USART_CPOL = USART_CPOL_Low; - USART_ClockInitStruct->USART_CPHA = USART_CPHA_1Edge; - USART_ClockInitStruct->USART_LastBit = USART_LastBit_Disable; -} - -/** - * @brief Enables or disables the specified USART peripheral. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USARTx peripheral. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_Cmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the selected USART by setting the UE bit in the CR1 register */ - USARTx->CR1 |= CR1_UE_Set; - } - else - { - /* Disable the selected USART by clearing the UE bit in the CR1 register */ - USARTx->CR1 &= CR1_UE_Reset; - } -} - -/** - * @brief Enables or disables the specified USART interrupts. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IT: specifies the USART interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TXE: Tansmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @param NewState: new state of the specified USARTx interrupts. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_ITConfig(USART_TypeDef* USARTx, uint16_t USART_IT, FunctionalState NewState) -{ - uint32_t usartreg = 0x00, itpos = 0x00, itmask = 0x00; - uint32_t usartxbase = 0x00; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CONFIG_IT(USART_IT)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - usartxbase = (uint32_t)USARTx; - - /* Get the USART register index */ - usartreg = (((uint8_t)USART_IT) >> 0x05); - - /* Get the interrupt position */ - itpos = USART_IT & IT_Mask; - itmask = (((uint32_t)0x01) << itpos); - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - usartxbase += 0x0C; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - usartxbase += 0x10; - } - else /* The IT is in CR3 register */ - { - usartxbase += 0x14; - } - if (NewState != DISABLE) - { - *(__IO uint32_t*)usartxbase |= itmask; - } - else - { - *(__IO uint32_t*)usartxbase &= ~itmask; - } -} - -/** - * @brief Enables or disables the USART’s DMA interface. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3 or UART4. - * @param USART_DMAReq: specifies the DMA request. - * This parameter can be any combination of the following values: - * @arg USART_DMAReq_Tx: USART DMA transmit request - * @arg USART_DMAReq_Rx: USART DMA receive request - * @param NewState: new state of the DMA Request sources. - * This parameter can be: ENABLE or DISABLE. - * @note The DMA mode is not available for UART5. - * @retval None - */ -void USART_DMACmd(USART_TypeDef* USARTx, uint16_t USART_DMAReq, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_1234_PERIPH(USARTx)); - assert_param(IS_USART_DMAREQ(USART_DMAReq)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the DMA transfer for selected requests by setting the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 |= USART_DMAReq; - } - else - { - /* Disable the DMA transfer for selected requests by clearing the DMAT and/or - DMAR bits in the USART CR3 register */ - USARTx->CR3 &= (uint16_t)~USART_DMAReq; - } -} - -/** - * @brief Sets the address of the USART node. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_Address: Indicates the address of the USART node. - * @retval None - */ -void USART_SetAddress(USART_TypeDef* USARTx, uint8_t USART_Address) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_ADDRESS(USART_Address)); - - /* Clear the USART address */ - USARTx->CR2 &= CR2_Address_Mask; - /* Set the USART address node */ - USARTx->CR2 |= USART_Address; -} - -/** - * @brief Selects the USART WakeUp method. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_WakeUp: specifies the USART wakeup method. - * This parameter can be one of the following values: - * @arg USART_WakeUp_IdleLine: WakeUp by an idle line detection - * @arg USART_WakeUp_AddressMark: WakeUp by an address mark - * @retval None - */ -void USART_WakeUpConfig(USART_TypeDef* USARTx, uint16_t USART_WakeUp) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_WAKEUP(USART_WakeUp)); - - USARTx->CR1 &= CR1_WAKE_Mask; - USARTx->CR1 |= USART_WakeUp; -} - -/** - * @brief Determines if the USART is in mute mode or not. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART mute mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_ReceiverWakeUpCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the USART mute mode by setting the RWU bit in the CR1 register */ - USARTx->CR1 |= CR1_RWU_Set; - } - else - { - /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */ - USARTx->CR1 &= CR1_RWU_Reset; - } -} - -/** - * @brief Sets the USART LIN Break detection length. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_LINBreakDetectLength: specifies the LIN break detection length. - * This parameter can be one of the following values: - * @arg USART_LINBreakDetectLength_10b: 10-bit break detection - * @arg USART_LINBreakDetectLength_11b: 11-bit break detection - * @retval None - */ -void USART_LINBreakDetectLengthConfig(USART_TypeDef* USARTx, uint16_t USART_LINBreakDetectLength) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_LIN_BREAK_DETECT_LENGTH(USART_LINBreakDetectLength)); - - USARTx->CR2 &= CR2_LBDL_Mask; - USARTx->CR2 |= USART_LINBreakDetectLength; -} - -/** - * @brief Enables or disables the USART’s LIN mode. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART LIN mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_LINCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the LIN mode by setting the LINEN bit in the CR2 register */ - USARTx->CR2 |= CR2_LINEN_Set; - } - else - { - /* Disable the LIN mode by clearing the LINEN bit in the CR2 register */ - USARTx->CR2 &= CR2_LINEN_Reset; - } -} - -/** - * @brief Transmits single data through the USARTx peripheral. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param Data: the data to transmit. - * @retval None - */ -void USART_SendData(USART_TypeDef* USARTx, uint16_t Data) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_DATA(Data)); - - /* Transmit Data */ - USARTx->DR = (Data & (uint16_t)0x01FF); -} - -/** - * @brief Returns the most recent received data by the USARTx peripheral. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @retval The received data. - */ -uint16_t USART_ReceiveData(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Receive Data */ - return (uint16_t)(USARTx->DR & (uint16_t)0x01FF); -} - -/** - * @brief Transmits break characters. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @retval None - */ -void USART_SendBreak(USART_TypeDef* USARTx) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Send break characters */ - USARTx->CR1 |= CR1_SBK_Set; -} - -/** - * @brief Sets the specified USART guard time. - * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. - * @param USART_GuardTime: specifies the guard time. - * @note The guard time bits are not available for UART4 and UART5. - * @retval None - */ -void USART_SetGuardTime(USART_TypeDef* USARTx, uint8_t USART_GuardTime) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - - /* Clear the USART Guard time */ - USARTx->GTPR &= GTPR_LSB_Mask; - /* Set the USART guard time */ - USARTx->GTPR |= (uint16_t)((uint16_t)USART_GuardTime << 0x08); -} - -/** - * @brief Sets the system clock prescaler. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_Prescaler: specifies the prescaler clock. - * @note The function is used for IrDA mode with UART4 and UART5. - * @retval None - */ -void USART_SetPrescaler(USART_TypeDef* USARTx, uint8_t USART_Prescaler) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - - /* Clear the USART prescaler */ - USARTx->GTPR &= GTPR_MSB_Mask; - /* Set the USART prescaler */ - USARTx->GTPR |= USART_Prescaler; -} - -/** - * @brief Enables or disables the USART’s Smart Card mode. - * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. - * @param NewState: new state of the Smart Card mode. - * This parameter can be: ENABLE or DISABLE. - * @note The Smart Card mode is not available for UART4 and UART5. - * @retval None - */ -void USART_SmartCardCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the SC mode by setting the SCEN bit in the CR3 register */ - USARTx->CR3 |= CR3_SCEN_Set; - } - else - { - /* Disable the SC mode by clearing the SCEN bit in the CR3 register */ - USARTx->CR3 &= CR3_SCEN_Reset; - } -} - -/** - * @brief Enables or disables NACK transmission. - * @param USARTx: where x can be 1, 2 or 3 to select the USART peripheral. - * @param NewState: new state of the NACK transmission. - * This parameter can be: ENABLE or DISABLE. - * @note The Smart Card mode is not available for UART4 and UART5. - * @retval None - */ -void USART_SmartCardNACKCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_123_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - if (NewState != DISABLE) - { - /* Enable the NACK transmission by setting the NACK bit in the CR3 register */ - USARTx->CR3 |= CR3_NACK_Set; - } - else - { - /* Disable the NACK transmission by clearing the NACK bit in the CR3 register */ - USARTx->CR3 &= CR3_NACK_Reset; - } -} - -/** - * @brief Enables or disables the USART’s Half Duplex communication. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the USART Communication. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_HalfDuplexCmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */ - USARTx->CR3 |= CR3_HDSEL_Set; - } - else - { - /* Disable the Half-Duplex mode by clearing the HDSEL bit in the CR3 register */ - USARTx->CR3 &= CR3_HDSEL_Reset; - } -} - -/** - * @brief Configures the USART’s IrDA interface. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IrDAMode: specifies the IrDA mode. - * This parameter can be one of the following values: - * @arg USART_IrDAMode_LowPower - * @arg USART_IrDAMode_Normal - * @retval None - */ -void USART_IrDAConfig(USART_TypeDef* USARTx, uint16_t USART_IrDAMode) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_IRDA_MODE(USART_IrDAMode)); - - USARTx->CR3 &= CR3_IRLP_Mask; - USARTx->CR3 |= USART_IrDAMode; -} - -/** - * @brief Enables or disables the USART’s IrDA interface. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param NewState: new state of the IrDA mode. - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -void USART_IrDACmd(USART_TypeDef* USARTx, FunctionalState NewState) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_FUNCTIONAL_STATE(NewState)); - - if (NewState != DISABLE) - { - /* Enable the IrDA mode by setting the IREN bit in the CR3 register */ - USARTx->CR3 |= CR3_IREN_Set; - } - else - { - /* Disable the IrDA mode by clearing the IREN bit in the CR3 register */ - USARTx->CR3 &= CR3_IREN_Reset; - } -} - -/** - * @brief Checks whether the specified USART flag is set or not. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_FLAG: specifies the flag to check. - * This parameter can be one of the following values: - * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) - * @arg USART_FLAG_LBD: LIN Break detection flag - * @arg USART_FLAG_TXE: Transmit data register empty flag - * @arg USART_FLAG_TC: Transmission Complete flag - * @arg USART_FLAG_RXNE: Receive data register not empty flag - * @arg USART_FLAG_IDLE: Idle Line detection flag - * @arg USART_FLAG_ORE: OverRun Error flag - * @arg USART_FLAG_NE: Noise Error flag - * @arg USART_FLAG_FE: Framing Error flag - * @arg USART_FLAG_PE: Parity Error flag - * @retval The new state of USART_FLAG (SET or RESET). - */ -FlagStatus USART_GetFlagStatus(USART_TypeDef* USARTx, uint16_t USART_FLAG) -{ - FlagStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_FLAG(USART_FLAG)); - /* The CTS flag is not available for UART4 and UART5 */ - if (USART_FLAG == USART_FLAG_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - if ((USARTx->SR & USART_FLAG) != (uint16_t)RESET) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - return bitstatus; -} - -/** - * @brief Clears the USARTx's pending flags. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_FLAG: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg USART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). - * @arg USART_FLAG_LBD: LIN Break detection flag. - * @arg USART_FLAG_TC: Transmission Complete flag. - * @arg USART_FLAG_RXNE: Receive data register not empty flag. - * - * @note - * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register (USART_GetFlagStatus()) - * followed by a read operation to USART_DR register (USART_ReceiveData()). - * - RXNE flag can be also cleared by a read to the USART_DR register - * (USART_ReceiveData()). - * - TC flag can be also cleared by software sequence: a read operation to - * USART_SR register (USART_GetFlagStatus()) followed by a write operation - * to USART_DR register (USART_SendData()). - * - TXE flag is cleared only by a write to the USART_DR register - * (USART_SendData()). - * @retval None - */ -void USART_ClearFlag(USART_TypeDef* USARTx, uint16_t USART_FLAG) -{ - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_FLAG(USART_FLAG)); - /* The CTS flag is not available for UART4 and UART5 */ - if ((USART_FLAG & USART_FLAG_CTS) == USART_FLAG_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - USARTx->SR = (uint16_t)~USART_FLAG; -} - -/** - * @brief Checks whether the specified USART interrupt has occurred or not. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IT: specifies the USART interrupt source to check. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TXE: Tansmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_ORE: OverRun Error interrupt - * @arg USART_IT_NE: Noise Error interrupt - * @arg USART_IT_FE: Framing Error interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @retval The new state of USART_IT (SET or RESET). - */ -ITStatus USART_GetITStatus(USART_TypeDef* USARTx, uint16_t USART_IT) -{ - uint32_t bitpos = 0x00, itmask = 0x00, usartreg = 0x00; - ITStatus bitstatus = RESET; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_GET_IT(USART_IT)); - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - /* Get the USART register index */ - usartreg = (((uint8_t)USART_IT) >> 0x05); - /* Get the interrupt position */ - itmask = USART_IT & IT_Mask; - itmask = (uint32_t)0x01 << itmask; - - if (usartreg == 0x01) /* The IT is in CR1 register */ - { - itmask &= USARTx->CR1; - } - else if (usartreg == 0x02) /* The IT is in CR2 register */ - { - itmask &= USARTx->CR2; - } - else /* The IT is in CR3 register */ - { - itmask &= USARTx->CR3; - } - - bitpos = USART_IT >> 0x08; - bitpos = (uint32_t)0x01 << bitpos; - bitpos &= USARTx->SR; - if ((itmask != (uint16_t)RESET)&&(bitpos != (uint16_t)RESET)) - { - bitstatus = SET; - } - else - { - bitstatus = RESET; - } - - return bitstatus; -} - -/** - * @brief Clears the USARTx’s interrupt pending bits. - * @param USARTx: Select the USART or the UART peripheral. - * This parameter can be one of the following values: - * USART1, USART2, USART3, UART4 or UART5. - * @param USART_IT: specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg USART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg USART_IT_LBD: LIN Break detection interrupt - * @arg USART_IT_TC: Transmission complete interrupt. - * @arg USART_IT_RXNE: Receive Data register not empty interrupt. - * - * @note - * - PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) pending bits are cleared by - * software sequence: a read operation to USART_SR register - * (USART_GetITStatus()) followed by a read operation to USART_DR register - * (USART_ReceiveData()). - * - RXNE pending bit can be also cleared by a read to the USART_DR register - * (USART_ReceiveData()). - * - TC pending bit can be also cleared by software sequence: a read - * operation to USART_SR register (USART_GetITStatus()) followed by a write - * operation to USART_DR register (USART_SendData()). - * - TXE pending bit is cleared only by a write to the USART_DR register - * (USART_SendData()). - * @retval None - */ -void USART_ClearITPendingBit(USART_TypeDef* USARTx, uint16_t USART_IT) -{ - uint16_t bitpos = 0x00, itmask = 0x00; - /* Check the parameters */ - assert_param(IS_USART_ALL_PERIPH(USARTx)); - assert_param(IS_USART_CLEAR_IT(USART_IT)); - /* The CTS interrupt is not available for UART4 and UART5 */ - if (USART_IT == USART_IT_CTS) - { - assert_param(IS_USART_123_PERIPH(USARTx)); - } - - bitpos = USART_IT >> 0x08; - itmask = ((uint16_t)0x01 << (uint16_t)bitpos); - USARTx->SR = (uint16_t)~itmask; -} -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c b/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c deleted file mode 100644 index e2a56c45d..000000000 --- a/bsp/stm32_lib3.1.0/Libraries/STM32F10x_StdPeriph_Driver/src/stm32f10x_wwdg.c +++ /dev/null @@ -1,223 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x_wwdg.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file provides all the WWDG firmware functions. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_wwdg.h" -#include "stm32f10x_rcc.h" - -/** @addtogroup STM32F10x_StdPeriph_Driver - * @{ - */ - -/** @defgroup WWDG - * @brief WWDG driver modules - * @{ - */ - -/** @defgroup WWDG_Private_TypesDefinitions - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_Defines - * @{ - */ - -/* ----------- WWDG registers bit address in the alias region ----------- */ -#define WWDG_OFFSET (WWDG_BASE - PERIPH_BASE) - -/* Alias word address of EWI bit */ -#define CFR_OFFSET (WWDG_OFFSET + 0x04) -#define EWI_BitNumber 0x09 -#define CFR_EWI_BB (PERIPH_BB_BASE + (CFR_OFFSET * 32) + (EWI_BitNumber * 4)) - -/* --------------------- WWDG registers bit mask ------------------------ */ - -/* CR register bit mask */ -#define CR_WDGA_Set ((uint32_t)0x00000080) - -/* CFR register bit mask */ -#define CFR_WDGTB_Mask ((uint32_t)0xFFFFFE7F) -#define CFR_W_Mask ((uint32_t)0xFFFFFF80) -#define BIT_Mask ((uint8_t)0x7F) - -/** - * @} - */ - -/** @defgroup WWDG_Private_Macros - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_Variables - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_FunctionPrototypes - * @{ - */ - -/** - * @} - */ - -/** @defgroup WWDG_Private_Functions - * @{ - */ - -/** - * @brief Deinitializes the WWDG peripheral registers to their default reset values. - * @param None - * @retval None - */ -void WWDG_DeInit(void) -{ - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, ENABLE); - RCC_APB1PeriphResetCmd(RCC_APB1Periph_WWDG, DISABLE); -} - -/** - * @brief Sets the WWDG Prescaler. - * @param WWDG_Prescaler: specifies the WWDG Prescaler. - * This parameter can be one of the following values: - * @arg WWDG_Prescaler_1: WWDG counter clock = (PCLK1/4096)/1 - * @arg WWDG_Prescaler_2: WWDG counter clock = (PCLK1/4096)/2 - * @arg WWDG_Prescaler_4: WWDG counter clock = (PCLK1/4096)/4 - * @arg WWDG_Prescaler_8: WWDG counter clock = (PCLK1/4096)/8 - * @retval None - */ -void WWDG_SetPrescaler(uint32_t WWDG_Prescaler) -{ - uint32_t tmpreg = 0; - /* Check the parameters */ - assert_param(IS_WWDG_PRESCALER(WWDG_Prescaler)); - /* Clear WDGTB[1:0] bits */ - tmpreg = WWDG->CFR & CFR_WDGTB_Mask; - /* Set WDGTB[1:0] bits according to WWDG_Prescaler value */ - tmpreg |= WWDG_Prescaler; - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/** - * @brief Sets the WWDG window value. - * @param WindowValue: specifies the window value to be compared to the downcounter. - * This parameter value must be lower than 0x80. - * @retval None - */ -void WWDG_SetWindowValue(uint8_t WindowValue) -{ - __IO uint32_t tmpreg = 0; - - /* Check the parameters */ - assert_param(IS_WWDG_WINDOW_VALUE(WindowValue)); - /* Clear W[6:0] bits */ - - tmpreg = WWDG->CFR & CFR_W_Mask; - - /* Set W[6:0] bits according to WindowValue value */ - tmpreg |= WindowValue & (uint32_t) BIT_Mask; - - /* Store the new value */ - WWDG->CFR = tmpreg; -} - -/** - * @brief Enables the WWDG Early Wakeup interrupt(EWI). - * @param None - * @retval None - */ -void WWDG_EnableIT(void) -{ - *(__IO uint32_t *) CFR_EWI_BB = (uint32_t)ENABLE; -} - -/** - * @brief Sets the WWDG counter value. - * @param Counter: specifies the watchdog counter value. - * This parameter must be a number between 0x40 and 0x7F. - * @retval None - */ -void WWDG_SetCounter(uint8_t Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - /* Write to T[6:0] bits to configure the counter value, no need to do - a read-modify-write; writing a 0 to WDGA bit does nothing */ - WWDG->CR = Counter & BIT_Mask; -} - -/** - * @brief Enables WWDG and load the counter value. - * @param Counter: specifies the watchdog counter value. - * This parameter must be a number between 0x40 and 0x7F. - * @retval None - */ -void WWDG_Enable(uint8_t Counter) -{ - /* Check the parameters */ - assert_param(IS_WWDG_COUNTER(Counter)); - WWDG->CR = CR_WDGA_Set | Counter; -} - -/** - * @brief Checks whether the Early Wakeup interrupt flag is set or not. - * @param None - * @retval The new state of the Early Wakeup interrupt flag (SET or RESET) - */ -FlagStatus WWDG_GetFlagStatus(void) -{ - return (FlagStatus)(WWDG->SR); -} - -/** - * @brief Clears Early Wakeup interrupt flag. - * @param None - * @retval None - */ -void WWDG_ClearFlag(void) -{ - WWDG->SR = (uint32_t)RESET; -} - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/app.c b/bsp/stm32_lib3.1.0/app.c deleted file mode 100644 index 1bcc6b81d..000000000 --- a/bsp/stm32_lib3.1.0/app.c +++ /dev/null @@ -1,70 +0,0 @@ -#include -#include "stm32f10x.h" - -#define LEDR_PORT GPIOA -#define LEDR_PIN GPIO_Pin_11 -#define LEDR_RCC RCC_APB2Periph_GPIOA - -#define LEDG_PORT GPIOA -#define LEDG_PIN GPIO_Pin_12 -#define LEDG_RCC RCC_APB2Periph_GPIOA - -char thread001_stack[512]; -struct rt_thread thread001; -void rt_init_thread_entry001(void *parameter) -{ - unsigned int count=0; - GPIO_InitTypeDef GPIO_InitStructure; - - RCC_APB2PeriphClockCmd(LEDG_RCC,ENABLE); - - GPIO_InitStructure.GPIO_Pin = LEDG_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(LEDG_PORT,&GPIO_InitStructure); - - while (1) - { - rt_kprintf("thread001:%d\r\n",count++); - GPIO_ResetBits(LEDG_PORT,LEDG_PIN); - rt_thread_delay(RT_TICK_PER_SECOND); - rt_kprintf("thread001:%d\r\n",count++); - GPIO_SetBits(LEDG_PORT,LEDG_PIN); - rt_thread_delay(RT_TICK_PER_SECOND); - } -} - -char thread002_stack[512]; -struct rt_thread thread002; -void rt_init_thread_entry002(void *parameter) -{ - unsigned int count=0; - GPIO_InitTypeDef GPIO_InitStructure; - - RCC_APB2PeriphClockCmd(LEDR_RCC,ENABLE); - - GPIO_InitStructure.GPIO_Pin = LEDR_PIN; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(LEDR_PORT,&GPIO_InitStructure); - - while (1) - { - rt_kprintf("thread001:%d\r\n",count++); - GPIO_ResetBits(LEDR_PORT,LEDR_PIN); - rt_thread_delay(RT_TICK_PER_SECOND*2); - rt_kprintf("thread001:%d\r\n",count++); - GPIO_SetBits(LEDR_PORT,LEDR_PIN); - rt_thread_delay(RT_TICK_PER_SECOND*2); - } -} - -int rt_application_init() -{ - rt_thread_init(&thread001,"led",rt_init_thread_entry001,RT_NULL,&thread001_stack[0], sizeof(thread001_stack),20,10); - rt_thread_init(&thread002,"led2",rt_init_thread_entry002,RT_NULL,&thread002_stack[0], sizeof(thread002_stack),20,10); - rt_thread_startup(&thread001); - rt_thread_startup(&thread002); - - return 0; -} diff --git a/bsp/stm32_lib3.1.0/board.c b/bsp/stm32_lib3.1.0/board.c deleted file mode 100644 index 6e6b06a65..000000000 --- a/bsp/stm32_lib3.1.0/board.c +++ /dev/null @@ -1,145 +0,0 @@ -#include -#include "stm32f10x.h" - -/******************************************************************************* -* Function Name : NVIC_Configuration -* Description : Configures the nested vectored interrupt controller. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NVIC_Configuration(void) -{ -#ifdef VECT_TAB_RAM - /* Set the Vector Table base location at 0x20000000 */ - NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0); -#else /* VECT_TAB_FLASH */ - /* Set the Vector Table base location at 0x08000000 */ - NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0); -#endif -} - -/******************************************************************************* - * Function Name : SysTick_Configuration - * Description : Configures the SysTick for OS tick. - * Input : None - * Output : None - * Return : None - *******************************************************************************/ -void SysTick_Configuration(void) -{ - RCC_ClocksTypeDef rcc_clocks; - rt_uint32_t cnts; - - RCC_GetClocksFreq(&rcc_clocks); - - cnts = (rt_uint32_t)rcc_clocks.HCLK_Frequency / RT_TICK_PER_SECOND; - - SysTick_Config(cnts); - SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK); -} - -/* init console to support rt_kprintf */ -static void rt_hw_console_init() -{ - /* Enable USART1 and GPIOA clocks */ - RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE); - - /* GPIO configuration */ - { - GPIO_InitTypeDef GPIO_InitStructure; - - /* Configure USART1 Tx (PA.09) as alternate function push-pull */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; - GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; - GPIO_Init(GPIOA, &GPIO_InitStructure); - - /* Configure USART1 Rx (PA.10) as input floating */ - GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10; - GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; - GPIO_Init(GPIOA, &GPIO_InitStructure); - } - - /* USART configuration */ - { - USART_InitTypeDef USART_InitStructure; - - /* USART1 configured as follow: - - BaudRate = 115200 baud - - Word Length = 8 Bits - - One Stop Bit - - No parity - - Hardware flow control disabled (RTS and CTS signals) - - Receive and transmit enabled - - USART Clock disabled - - USART CPOL: Clock is active low - - USART CPHA: Data is captured on the middle - - USART LastBit: The clock pulse of the last data bit is not output to - the SCLK pin - */ - USART_InitStructure.USART_BaudRate = 115200; - USART_InitStructure.USART_WordLength = USART_WordLength_8b; - USART_InitStructure.USART_StopBits = USART_StopBits_1; - USART_InitStructure.USART_Parity = USART_Parity_No; - USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; - USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; - USART_Init(USART1, &USART_InitStructure); - /* Enable USART1 */ - USART_Cmd(USART1, ENABLE); - } -} - -/* write one character to serial, must not trigger interrupt */ -static void rt_hw_console_putc(const char c) -{ - /* - to be polite with serial console add a line feed - to the carriage return character - */ - if (c=='\n')rt_hw_console_putc('\r'); - - while (!(USART1->SR & USART_FLAG_TXE)); - USART1->DR = (c & 0x1FF); -} - -/** - * This function is used by rt_kprintf to display a string on console. - * - * @param str the displayed string - */ -void rt_hw_console_output(const char* str) -{ - while (*str) - { - rt_hw_console_putc (*str++); - } -} - -void board_init(void) -{ - /* NVIC Configuration */ - NVIC_Configuration(); - - /* Configure the SysTick */ - SysTick_Configuration(); - - rt_hw_console_init(); -} - -/** - * This is the timer interrupt service routine. - * - */ -extern void rt_hw_interrupt_thread_switch(void); -void rt_hw_timer_handler(void) -{ - /* enter interrupt */ - rt_interrupt_enter(); - - rt_tick_increase(); - - /* leave interrupt */ - rt_interrupt_leave(); - rt_hw_interrupt_thread_switch(); -} diff --git a/bsp/stm32_lib3.1.0/main.c b/bsp/stm32_lib3.1.0/main.c deleted file mode 100644 index 16fdf00ac..000000000 --- a/bsp/stm32_lib3.1.0/main.c +++ /dev/null @@ -1,72 +0,0 @@ -#include -#include -#include "stm32f10x.h" - -extern int rt_application_init(void); -extern void board_init(void); - -#ifdef __CC_ARM -extern int Image$$RW_IRAM1$$ZI$$Limit; -#elif __ICCARM__ -#pragma section="HEAP" -#else -extern int __bss_end; -#endif - -void rtthread_startup(void) -{ - /* show version */ - rt_show_version(); - - /* init tick */ - rt_system_tick_init(); - - /* init kernel object */ - rt_system_object_init(); - - /* init timer system */ - rt_system_timer_init(); - -#ifdef RT_USING_HEAP -#ifdef __CC_ARM - rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)0x20005000); - //#warning Image$$RW_IRAM1$$ZI$$Limit -#elif __ICCARM__ - rt_system_heap_init(__segment_end("HEAP"), (void*)0x20005000); -#else - /* init memory system */ - rt_system_heap_init((void*)&__bss_end, (void*)0x20005000); -#endif -#endif - - /* init scheduler system */ - rt_system_scheduler_init(); - - /* init all device */ - rt_device_init_all(); - - /* init application */ - rt_application_init(); - - /* init idle thread */ - rt_thread_idle_init(); - - /* start scheduler */ - rt_system_scheduler_start(); -} - -int main(void) -{ - rt_uint32_t UNUSED level; - - /* disable interrupt first */ - level = rt_hw_interrupt_disable(); - - SystemInit(); - board_init(); - - rtthread_startup(); - while (1); -} - - diff --git a/bsp/stm32_lib3.1.0/project.Opt b/bsp/stm32_lib3.1.0/project.Opt deleted file mode 100644 index 54684eeee..000000000 --- a/bsp/stm32_lib3.1.0/project.Opt +++ /dev/null @@ -1,76 +0,0 @@ -### uVision2 Project, (C) Keil Software -### Do not modify ! - - cExt (*.c) - aExt (*.s*; *.src; *.a*) - oExt (*.obj) - lExt (*.lib) - tExt (*.txt; *.h; *.inc) - pExt (*.plm) - CppX (*.cpp) - DaveTm { 0,0,0,0,0,0,0,0 } - -Target (rt_thread_stm32_lib3), 0x0004 // Tools: 'ARM-ADS' -GRPOPT 1,(user),1,0,0 -GRPOPT 2,(StdPeriph_Driver),0,0,0 -GRPOPT 3,(CMSIS),0,0,0 -GRPOPT 4,(Kernel),1,0,0 -GRPOPT 5,(STM32),1,0,0 - -OPTFFF 1,1,1,0,0,0,0,0,<.\main.c> -OPTFFF 1,2,1,134217728,0,0,0,0,<.\stm32f10x_it.c> -OPTFFF 1,3,1,318767104,0,0,0,0,<.\app.c> -OPTFFF 1,4,1,268435458,0,1,1,0,<.\board.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,226,255,255,255,22,0,0,0,29,0,0,0,245,3,0,0,157,1,0,0 } -OPTFFF 2,5,1,167772160,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c> -OPTFFF 2,6,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c> -OPTFFF 2,7,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c> -OPTFFF 2,8,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c> -OPTFFF 2,9,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c> -OPTFFF 2,10,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c> -OPTFFF 2,11,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c> -OPTFFF 2,12,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c> -OPTFFF 2,13,1,0,0,0,0,0,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c> -OPTFFF 3,14,1,234881024,0,0,0,0,<.\Libraries\CMSIS\Core\CM3\core_cm3.c> -OPTFFF 3,15,1,0,0,0,0,0,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c> -OPTFFF 4,16,1,0,0,0,0,0,<..\..\src\clock.c> -OPTFFF 4,17,1,0,0,0,0,0,<..\..\src\device.c> -OPTFFF 4,18,1,0,0,0,0,0,<..\..\src\idle.c> -OPTFFF 4,19,1,301989888,0,0,0,0,<..\..\src\ipc.c> -OPTFFF 4,20,1,0,0,0,0,0,<..\..\src\irq.c> -OPTFFF 4,21,1,0,0,0,0,0,<..\..\src\kservice.c> -OPTFFF 4,22,1,0,0,0,0,0,<..\..\src\mem.c> -OPTFFF 4,23,1,0,0,0,0,0,<..\..\src\mempool.c> -OPTFFF 4,24,1,0,0,0,0,0,<..\..\src\object.c> -OPTFFF 4,25,1,150994944,0,0,0,0,<..\..\src\scheduler.c> -OPTFFF 4,26,1,0,0,0,0,0,<..\..\src\slab.c> -OPTFFF 4,27,1,0,0,0,0,0,<..\..\src\thread.c> -OPTFFF 4,28,1,0,0,0,0,0,<..\..\src\timer.c> -OPTFFF 5,29,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\cpu.c> -OPTFFF 5,30,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\fault.c> -OPTFFF 5,31,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\interrupt.c> -OPTFFF 5,32,1,0,0,0,0,0,<..\..\libcpu\arm\stm32\stack.c> -OPTFFF 5,33,2,0,0,0,0,0,<..\..\libcpu\arm\stm32\context_rvds.S> -OPTFFF 5,34,2,0,0,0,0,0,<..\..\libcpu\arm\stm32\fault_rvds.S> -OPTFFF 5,35,2,0,0,0,0,0,<..\..\libcpu\arm\stm32\start_rvds.s> - - -TARGOPT 1, (rt_thread_stm32_lib3) - ADSCLK=8000000 - OPTTT 1,1,1,0 - OPTHX 1,65535,0,0,0 - OPTLX 79,66,8,<.\obj\> - OPTOX 16 - OPTLT 1,1,1,0,1,1,0,1,0,0,0,0 - OPTXL 1,1,1,1,1,1,1,0,0 - OPTFL 1,0,1 - OPTAX 0 - OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103CB)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103CB) - OPTDBG 49149,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()() - OPTKEY 0,(JL2CM3)(-U11111117 -O718 -S0 -C0 -JU1 -JI127.0.0.1 -JP0 -N00("ARM CoreSight SW-DP") -D00(00000000) -L00(0) -TO18 -TC8000000 -TP21 -TDS8003 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO23 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000) - OPTKEY 0,(DLGDARM)((1010=-1,-1,-1,-1,0)(1007=-1,-1,-1,-1,0)(1008=-1,-1,-1,-1,0)(1009=-1,-1,-1,-1,0)(100=-1,-1,-1,-1,0)(110=-1,-1,-1,-1,0)(111=-1,-1,-1,-1,0)(1011=-1,-1,-1,-1,0)(180=-1,-1,-1,-1,0)(120=814,182,1225,602,1)(121=-1,-1,-1,-1,0)(122=-1,-1,-1,-1,0)(123=-1,-1,-1,-1,0)(140=-1,-1,-1,-1,0)(240=-1,-1,-1,-1,0)(190=-1,-1,-1,-1,0)(200=-1,-1,-1,-1,0)(170=-1,-1,-1,-1,0)(130=-1,-1,-1,-1,0)(131=-1,-1,-1,-1,0)(132=-1,-1,-1,-1,0)(133=-1,-1,-1,-1,0)(160=-1,-1,-1,-1,0)(161=-1,-1,-1,-1,0)(162=-1,-1,-1,-1,0)(210=-1,-1,-1,-1,0)(211=-1,-1,-1,-1,0)(220=-1,-1,-1,-1,0)(221=-1,-1,-1,-1,0)(230=-1,-1,-1,-1,0)(234=-1,-1,-1,-1,0)(231=-1,-1,-1,-1,0)(232=-1,-1,-1,-1,0)(233=-1,-1,-1,-1,0)(150=-1,-1,-1,-1,0)(151=-1,-1,-1,-1,0)) - OPTKEY 0,(ARMDBGFLAGS)(-T0) - OPTDF 0x94 - OPTLE <> - OPTLC <> -EndOpt - diff --git a/bsp/stm32_lib3.1.0/project.Uv2 b/bsp/stm32_lib3.1.0/project.Uv2 deleted file mode 100644 index f6b90e398..000000000 --- a/bsp/stm32_lib3.1.0/project.Uv2 +++ /dev/null @@ -1,138 +0,0 @@ -### uVision2 Project, (C) Keil Software -### Do not modify ! - -Target (rt_thread_stm32_lib3), 0x0004 // Tools: 'ARM-ADS' - -Group (user) -Group (StdPeriph_Driver) -Group (CMSIS) -Group (Kernel) -Group (STM32) - -File 1,1,<.\main.c> -File 1,1,<.\stm32f10x_it.c> -File 1,1,<.\app.c> -File 1,1,<.\board.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c> -File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c> -File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c> -File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c> -File 4,1,<..\..\src\clock.c> -File 4,1,<..\..\src\device.c> -File 4,1,<..\..\src\idle.c> -File 4,1,<..\..\src\ipc.c> -File 4,1,<..\..\src\irq.c> -File 4,1,<..\..\src\kservice.c> -File 4,1,<..\..\src\mem.c> -File 4,1,<..\..\src\mempool.c> -File 4,1,<..\..\src\object.c> -File 4,1,<..\..\src\scheduler.c> -File 4,1,<..\..\src\slab.c> -File 4,1,<..\..\src\thread.c> -File 4,1,<..\..\src\timer.c> -File 5,1,<..\..\libcpu\arm\stm32\cpu.c> -File 5,1,<..\..\libcpu\arm\stm32\fault.c> -File 5,1,<..\..\libcpu\arm\stm32\interrupt.c> -File 5,1,<..\..\libcpu\arm\stm32\stack.c> -File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S> -File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S> -File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s> - - -Options 1,0,0 // Target 'rt_thread_stm32_lib3' - Device (STM32F103CB) - Vendor (STMicroelectronics) - Cpu (IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x801FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3")) - FlashUt () - StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code")) - FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL020000)) - DevID (4401) - Rgf (stm32f10x_lib.h) - Mem () - C () - A () - RL () - OH () - DBC_IFX () - DBC_CMS () - DBC_AMS () - DBC_LMS () - UseEnv=0 - EnvBin () - EnvInc () - EnvLib () - EnvReg (˙ST\STM32F10x\) - OrgReg (˙ST\STM32F10x\) - TgStat=16 - OutDir (.\obj\) - OutName (rt_thread) - GenApp=1 - GenLib=0 - GenHex=0 - Debug=1 - Browse=1 - LstDir (.\obj\) - HexSel=1 - MG32K=0 - TGMORE=0 - RunUsr 0 0 <> - RunUsr 1 0 <> - BrunUsr 0 0 <> - BrunUsr 1 0 <> - CrunUsr 0 0 <> - CrunUsr 1 0 <> - SVCSID <> - GLFLAGS=1790 - ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ACPUTYP ("Cortex-M3") - RVDEV () - ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 } - OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - OCMADSIRAM { 0,0,0,0,32,0,80,0,0 } - OCMADSIROM { 1,0,0,0,8,0,0,2,0 } - OCMADSXRAM { 0,0,0,0,0,0,0,0,0 } - OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,2,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,80,0,0,0,0,0,0,0,0,0,0,0 } - RV_STAVEC () - ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ADSCMISC () - ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_MD,) - ADSCUDEF () - ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;./) - ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ADSAMISC () - ADSADEFN () - ADSAUDEF () - ADSAINCD () - PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - IncBld=1 - AlwaysBuild=0 - GenAsm=0 - AsmAsm=0 - PublicsOnly=0 - StopCode=3 - CustArgs () - LibMods () - ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 } - ADSLDTA (0x08000000) - ADSLDDA (0x20000000) - ADSLDSC () - ADSLDIB () - ADSLDIC () - ADSLDMC () - ADSLDIF () - ADSLDDW () - OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103CB)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103CB) - OPTDBG 49149,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()() - FLASH1 { 1,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 } - FLASH2 (Segger\JL2CM3.dll) - FLASH3 ("" ()) - FLASH4 () -EndOpt - diff --git a/bsp/stm32_lib3.1.0/rtconfig.h b/bsp/stm32_lib3.1.0/rtconfig.h deleted file mode 100644 index c3a142e59..000000000 --- a/bsp/stm32_lib3.1.0/rtconfig.h +++ /dev/null @@ -1,157 +0,0 @@ -/* RT-Thread config file */ -#ifndef __RTTHREAD_CFG_H__ -#define __RTTHREAD_CFG_H__ - -/* RT_NAME_MAX*/ -#define RT_NAME_MAX 8 - -/* RT_ALIGN_SIZE*/ -#define RT_ALIGN_SIZE 4 - -/* PRIORITY_MAX*/ -#define RT_THREAD_PRIORITY_MAX 256 - -/* Tick per Second*/ -#define RT_TICK_PER_SECOND 100 - -/* SECTION: RT_DEBUG */ -/* Thread Debug*/ -#define RT_DEBUG -#define RT_THREAD_DEBUG - -#define RT_USING_OVERFLOW_CHECK - -/* Using Hook*/ -#define RT_USING_HOOK - -/* SECTION: IPC */ -/* Using Semaphore*/ -#define RT_USING_SEMAPHORE - -/* Using Mutex*/ -#define RT_USING_MUTEX - -/* Using Event*/ -#define RT_USING_EVENT - -/* Using Faset Event*/ -/* #define RT_USING_FASTEVENT */ - -/* Using MailBox*/ -#define RT_USING_MAILBOX - -/* Using Message Queue*/ -#define RT_USING_MESSAGEQUEUE - -/* SECTION: Memory Management */ -/* Using Memory Pool Management*/ -#define RT_USING_MEMPOOL - -/* Using Dynamic Heap Management*/ -#define RT_USING_HEAP - -/* Using Small MM*/ -#define RT_USING_SMALL_MEM - -/* Using SLAB Allocator*/ -/* #define RT_USING_SLAB */ - -/* SECTION: Device System */ -/* Using Device System*/ -#define RT_USING_DEVICE -// #define RT_USING_UART1 -// #define RT_USING_UART2 -// #define RT_USING_UART3 - -/* SECTION: Console options */ -/* the buffer size of console*/ -#define RT_CONSOLEBUF_SIZE 128 - -/* SECTION: FinSH shell options */ -/* Using FinSH as Shell*/ -// #define RT_USING_FINSH -/* Using symbol table */ -#define FINSH_USING_SYMTAB -#define FINSH_USING_DESCRIPTION - -/* SECTION: a mini libc */ -/* Using mini libc library*/ -/* #define RT_USING_MINILIBC */ - -/* SECTION: C++ support */ -/* Using C++ support*/ -/* #define RT_USING_CPLUSPLUS */ - -/* #define RT_USING_RTGUI */ - -// #define RT_USING_DFS -/* SECTION: DFS options */ -/* the max number of mounted filesystem */ -#define DFS_FILESYSTEMS_MAX 2 -/* the max number of opened files */ -#define DFS_FD_MAX 8 -/* the max number of cached sector */ -#define DFS_CACHE_MAX_NUM 8 - -/* SECTION: lwip, a lighwight TCP/IP protocol stack */ -/* Using lighweight TCP/IP protocol stack*/ -// #define RT_USING_LWIP - -/* Trace LwIP protocol*/ -/* #define RT_LWIP_DEBUG */ - -/* Enable ICMP protocol*/ -#define RT_LWIP_ICMP - -/* Enable IGMP protocol*/ -/* #define RT_LWIP_IGMP */ - -/* Enable UDP protocol*/ -#define RT_LWIP_UDP - -/* Enable TCP protocol*/ -#define RT_LWIP_TCP - -/* the number of simulatenously active TCP connections*/ -#define RT_LWIP_TCP_PCB_NUM 5 - -/* TCP sender buffer space*/ -#define RT_LWIP_TCP_SND_BUF 1500 - -/* Enable SNMP protocol*/ -/* #define RT_LWIP_SNMP */ - -/* Using DHCP*/ -/* #define RT_LWIP_DHCP */ - -#define RT_LWIP_DNS - -/* ip address of target*/ -#define RT_LWIP_IPADDR0 192 -#define RT_LWIP_IPADDR1 168 -#define RT_LWIP_IPADDR2 1 -#define RT_LWIP_IPADDR3 30 - -/* gateway address of target*/ -#define RT_LWIP_GWADDR0 192 -#define RT_LWIP_GWADDR1 168 -#define RT_LWIP_GWADDR2 1 -#define RT_LWIP_GWADDR3 1 - -/* mask address of target*/ -#define RT_LWIP_MSKADDR0 255 -#define RT_LWIP_MSKADDR1 255 -#define RT_LWIP_MSKADDR2 255 -#define RT_LWIP_MSKADDR3 0 - -/* tcp thread options */ -#define RT_LWIP_TCPTHREAD_PRIORITY 120 -#define RT_LWIP_TCPTHREAD_MBOX_SIZE 4 -#define RT_LWIP_TCPTHREAD_STACKSIZE 1024 - -/* ethernet if thread options */ -#define RT_LWIP_ETHTHREAD_PRIORITY 128 -#define RT_LWIP_ETHTHREAD_MBOX_SIZE 4 -#define RT_LWIP_ETHTHREAD_STACKSIZE 512 - -#endif diff --git a/bsp/stm32_lib3.1.0/stm32f10x_conf.h b/bsp/stm32_lib3.1.0/stm32f10x_conf.h deleted file mode 100644 index ad179fe4c..000000000 --- a/bsp/stm32_lib3.1.0/stm32f10x_conf.h +++ /dev/null @@ -1,76 +0,0 @@ -/** - ****************************************************************************** - * @file Project/Template/stm32f10x_conf.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief Library configuration file. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_CONF_H -#define __STM32F10x_CONF_H - -/* Includes ------------------------------------------------------------------*/ -/* Uncomment the line below to enable peripheral header file inclusion */ -/* #include "stm32f10x_adc.h" */ -#include "stm32f10x_bkp.h" -/* #include "stm32f10x_can.h" */ -/* #include "stm32f10x_crc.h" */ -/* #include "stm32f10x_dac.h" */ -/* #include "stm32f10x_dbgmcu.h" */ -/* #include "stm32f10x_dma.h" */ -#include "stm32f10x_exti.h" -#include "stm32f10x_flash.h" -//#include "stm32f10x_fsmc.h" -#include "stm32f10x_gpio.h" -/* #include "stm32f10x_i2c.h" */ -/* #include "stm32f10x_iwdg.h" */ -#include "stm32f10x_pwr.h" -#include "stm32f10x_rcc.h" -#include "stm32f10x_rtc.h" -/* #include "stm32f10x_sdio.h" */ -//#include "stm32f10x_spi.h" -/* #include "stm32f10x_tim.h" */ -#include "stm32f10x_usart.h" -/* #include "stm32f10x_wwdg.h" */ -#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Uncomment the line below to expanse the "assert_param" macro in the - Standard Peripheral Library drivers code */ -/* #define USE_FULL_ASSERT 1 */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT - -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - -#endif /* __STM32F10x_CONF_H */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/stm32f10x_it.c b/bsp/stm32_lib3.1.0/stm32f10x_it.c deleted file mode 100644 index 6f25d7817..000000000 --- a/bsp/stm32_lib3.1.0/stm32f10x_it.c +++ /dev/null @@ -1,968 +0,0 @@ -/** - ****************************************************************************** - * @file Project/Template/stm32f10x_it.c - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief Main Interrupt Service Routines. - * This file provides template for all exceptions handler and - * peripherals interrupt service routine. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f10x_it.h" - -/** @addtogroup Template_Project - * @{ - */ - -/* Private typedef -----------------------------------------------------------*/ -/* Private define ------------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private function prototypes -----------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -/******************************************************************************/ -/* Cortex-M3 Processor Exceptions Handlers */ -/******************************************************************************/ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSVC exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC1_2_IRQHandler -* Description : This function handles ADC1 and ADC2 global interrupts requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC1_2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : ADC3_IRQHandler -* Description : This function handles ADC3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void ADC3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : BusFaultException -* Description : This function handles Bus Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void BusFaultException(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : USB_HP_CAN_TX_IRQHandler -* Description : This function handles USB High Priority or CAN TX interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_HP_CAN1_TX_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USB_LP_CAN_RX0_IRQHandler -* Description : This function handles USB Low Priority or CAN RX0 interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USB_LP_CAN1_RX0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_RX1_IRQHandler -* Description : This function handles CAN RX1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN1_RX1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : CAN_SCE_IRQHandler -* Description : This function handles CAN SCE interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void CAN1_SCE_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel1_IRQHandler -* Description : This function handles DMA1 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel2_IRQHandler -* Description : This function handles DMA1 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel3_IRQHandler -* Description : This function handles DMA1 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel4_IRQHandler -* Description : This function handles DMA1 Channel 4 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel5_IRQHandler -* Description : This function handles DMA1 Channel 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel6_IRQHandler -* Description : This function handles DMA1 Channel 6 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA1_Channel7_IRQHandler -* Description : This function handles DMA1 Channel 7 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA1_Channel7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel1_IRQHandler -* Description : This function handles DMA2 Channel 1 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel2_IRQHandler -* Description : This function handles DMA2 Channel 2 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel3_IRQHandler -* Description : This function handles DMA2 Channel 3 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DMA2_Channel4_5_IRQHandler -* Description : This function handles DMA2 Channel 4 and DMA2 Channel 5 -* interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DMA2_Channel4_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : DebugMonitor -* Description : This function handles Debug Monitor exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void DebugMonitor(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI0_IRQHandler -* Description : This function handles External interrupt Line 0 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI0_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI1_IRQHandler -* Description : This function handles External interrupt Line 1 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI2_IRQHandler -* Description : This function handles External interrupt Line 2 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI3_IRQHandler -* Description : This function handles External interrupt Line 3 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI4_IRQHandler -* Description : This function handles External interrupt Line 4 request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI9_5_IRQHandler -* Description : This function handles External lines 9 to 5 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI9_5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : EXTI15_10_IRQHandler -* Description : This function handles External lines 15 to 10 interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void EXTI15_10_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_BRK_IRQHandler -* Description : This function handles TIM8 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_UP_IRQHandler -* Description : This function handles TIM8 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_TRG_COM_IRQHandler -* Description : This function handles TIM8 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM8_CC_IRQHandler -* Description : This function handles TIM8 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM8_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART1_IRQHandler -* Description : This function handles USART1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART2_IRQHandler -* Description : This function handles USART2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USART3_IRQHandler -* Description : This function handles USART3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USART3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART4_IRQHandler -* Description : This function handles UART4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : UART5_IRQHandler -* Description : This function handles UART5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UART5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI1_IRQHandler -* Description : This function handles SPI1 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI1_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI2_IRQHandler -* Description : This function handles SPI2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SPI3_IRQHandler -* Description : This function handles SPI3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SPI3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SVCHandler -* Description : This function handles SVCall exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SVCHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SysTickHandler -* Description : This function handles SysTick Handler. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -extern void rt_hw_timer_handler(void); - -void SysTickHandler(void) -{ - /* handle os tick */ - rt_hw_timer_handler(); -} - -/******************************************************************************* -* Function Name : -* Description : This function handles Usage Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void UsageFaultException(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : WWDG_IRQHandler -* Description : This function handles WWDG interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void WWDG_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TAMPER_IRQHandler -* Description : This function handles Tamper interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TAMPER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : USBWakeUp_IRQHandler -* Description : This function handles USB WakeUp interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void USBWakeUp_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_BRK_IRQHandler -* Description : This function handles TIM1 Break interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_BRK_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_UP_IRQHandler -* Description : This function handles TIM1 overflow and update interrupt -* request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_UP_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_TRG_COM_IRQHandler -* Description : This function handles TIM1 Trigger and commutation interrupts -* requests. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_TRG_COM_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM1_CC_IRQHandler -* Description : This function handles TIM1 capture compare interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM1_CC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM2_IRQHandler -* Description : This function handles TIM2 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM2_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM3_IRQHandler -* Description : This function handles TIM3 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM3_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM4_IRQHandler -* Description : This function handles TIM4 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM4_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM5_IRQHandler -* Description : This function handles TIM5 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM5_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM6_IRQHandler -* Description : This function handles TIM6 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM6_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : TIM7_IRQHandler -* Description : This function handles TIM7 global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void TIM7_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FLASH_IRQHandler -* Description : This function handles Flash interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FLASH_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : FSMC_IRQHandler -* Description : This function handles FSMC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void FSMC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : HardFaultException -* Description : This function handles Hard Fault exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void HardFaultException(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : I2C1_EV_IRQHandler -* Description : This function handles I2C1 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C1_ER_IRQHandler -* Description : This function handles I2C1 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C1_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_EV_IRQHandler -* Description : This function handles I2C2 Event interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_EV_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : I2C2_ER_IRQHandler -* Description : This function handles I2C2 Error interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void I2C2_ER_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : MemManageException -* Description : This function handles Memory Manage exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void MemManageException(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) - { - } -} - -/******************************************************************************* -* Function Name : NMIException -* Description : This function handles NMI exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void NMIException(void) -{ -} - -/******************************************************************************* -* Function Name : PVD_IRQHandler -* Description : This function handles PVD interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PVD_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : PendSVC -* Description : This function handles PendSVC exception. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void PendSVC(void) -{ -} - -/******************************************************************************* -* Function Name : RCC_IRQHandler -* Description : This function handles RCC interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RCC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTC_IRQHandler -* Description : This function handles RTC global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTC_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : RTCAlarm_IRQHandler -* Description : This function handles RTC Alarm interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void RTCAlarm_IRQHandler(void) -{ -} - -/******************************************************************************* -* Function Name : SDIO_IRQHandler -* Description : This function handles SDIO global interrupt request. -* Input : None -* Output : None -* Return : None -*******************************************************************************/ -void SDIO_IRQHandler(void) -{ -} - -void DMA2_Channel5_IRQHandler(void) -{ -} - -void ETH_IRQHandler(void) -{ -} - -void ETH_WKUP_IRQHandler(void) -{ -} - -void CAN2_TX_IRQHandler(void) -{ -} - -void CAN2_RX0_IRQHandler(void) -{ -} - -void CAN2_RX1_IRQHandler(void) -{ -} - -void CAN2_SCE_IRQHandler(void) -{ -} - -void OTG_FS_IRQHandler(void) -{ -} - -/******************************************************************************/ -/* STM32F10x Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f10x_xx.s). */ -/******************************************************************************/ - -/** - * @brief This function handles PPP interrupt request. - * @param None - * @retval None - */ -/*void PPP_IRQHandler(void) -{ -}*/ - -/** - * @} - */ - - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ diff --git a/bsp/stm32_lib3.1.0/stm32f10x_it.h b/bsp/stm32_lib3.1.0/stm32f10x_it.h deleted file mode 100644 index fe38e5449..000000000 --- a/bsp/stm32_lib3.1.0/stm32f10x_it.h +++ /dev/null @@ -1,134 +0,0 @@ -/** - ****************************************************************************** - * @file Project/Template/stm32f10x_it.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief This file contains the headers of the interrupt handlers. - ****************************************************************************** - * @copy - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F10x_IT_H -#define __STM32F10x_IT_H - -#ifdef __cplusplus -extern "C" -{ -#endif - - /* Includes ------------------------------------------------------------------*/ -#include "stm32f10x.h" - - /* Exported types ------------------------------------------------------------*/ - /* Exported constants --------------------------------------------------------*/ - /* Exported macro ------------------------------------------------------------*/ - /* Exported functions ------------------------------------------------------- */ - - void NMI_Handler(void); - void HardFault_Handler(void); - void MemManage_Handler(void); - void BusFault_Handler(void); - void UsageFault_Handler(void); - void SVC_Handler(void); - void DebugMon_Handler(void); - void PendSV_Handler(void); - void SysTick_Handler(void); - - void NMIException(void); - void HardFaultException(void); - void MemManageException(void); - void BusFaultException(void); - void UsageFaultException(void); - void DebugMonitor(void); - void SVCHandler(void); - void PendSVC(void); - void SysTickHandler(void); - void WWDG_IRQHandler(void); - void PVD_IRQHandler(void); - void TAMPER_IRQHandler(void); - void RTC_IRQHandler(void); - void FLASH_IRQHandler(void); - void RCC_IRQHandler(void); - void EXTI0_IRQHandler(void); - void EXTI1_IRQHandler(void); - void EXTI2_IRQHandler(void); - void EXTI3_IRQHandler(void); - void EXTI4_IRQHandler(void); - void DMA1_Channel1_IRQHandler(void); - void DMA1_Channel2_IRQHandler(void); - void DMA1_Channel3_IRQHandler(void); - void DMA1_Channel4_IRQHandler(void); - void DMA1_Channel5_IRQHandler(void); - void DMA1_Channel6_IRQHandler(void); - void DMA1_Channel7_IRQHandler(void); - void ADC1_2_IRQHandler(void); - void USB_HP_CAN_TX_IRQHandler(void); - void USB_LP_CAN_RX0_IRQHandler(void); - void CAN_RX1_IRQHandler(void); - void CAN_SCE_IRQHandler(void); - void EXTI9_5_IRQHandler(void); - void TIM1_BRK_IRQHandler(void); - void TIM1_UP_IRQHandler(void); - void TIM1_TRG_COM_IRQHandler(void); - void TIM1_CC_IRQHandler(void); - void TIM2_IRQHandler(void); - void TIM3_IRQHandler(void); - void TIM4_IRQHandler(void); - void I2C1_EV_IRQHandler(void); - void I2C1_ER_IRQHandler(void); - void I2C2_EV_IRQHandler(void); - void I2C2_ER_IRQHandler(void); - void SPI1_IRQHandler(void); - void SPI2_IRQHandler(void); - void USART1_IRQHandler(void); - void USART2_IRQHandler(void); - void USART3_IRQHandler(void); - void EXTI15_10_IRQHandler(void); - void RTCAlarm_IRQHandler(void); - void USBWakeUp_IRQHandler(void); - /****** HD ******/ - void TIM8_BRK_IRQHandler(void); - void TIM8_UP_IRQHandler(void); - void TIM8_TRG_COM_IRQHandler(void); - void TIM8_CC_IRQHandler(void); - void ADC3_IRQHandler(void); - void FSMC_IRQHandler(void); - void SDIO_IRQHandler(void); - void TIM5_IRQHandler(void); - void SPI3_IRQHandler(void); - void UART4_IRQHandler(void); - void UART5_IRQHandler(void); - void TIM6_IRQHandler(void); - void TIM7_IRQHandler(void); - void DMA2_Channel1_IRQHandler(void); - void DMA2_Channel2_IRQHandler(void); - void DMA2_Channel3_IRQHandler(void); - void DMA2_Channel4_5_IRQHandler(void); - /********* CL **********/ - void DMA2_Channel5_IRQHandler(void); - void ETH_IRQHandler(void); - void ETH_WKUP_IRQHandler(void); - void CAN2_TX_IRQHandler(void); - void CAN2_RX0_IRQHandler(void); - void CAN2_RX1_IRQHandler(void); - void CAN2_SCE_IRQHandler(void); - void OTG_FS_IRQHandler(void); - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F10x_IT_H */ - -/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/ -- GitLab