## Only need to configure when remote login is required
# user:
#   username: your username
#   password: your password if need
#   key_file: your ssh-key file path if need
#   port: your ssh port, default 22
#   timeout: ssh connection timeout (second), default 30
oceanbase-ce:
  servers:
    - name: server1
      # Please don't use hostname, only IP can be supported
      ip: 172.19.33.2
    - name: server2
      ip: 172.19.33.3
    - name: server3
      ip: 172.19.33.4
  global:
    # The working directory for OceanBase Database. OceanBase Database is started under this directory. This is a required field.
    home_path: /root/observer
    # The directory for data storage. The default value is $home_path/store.
    # data_dir: /data
    # The directory for clog, ilog, and slog. The default value is the same as the data_dir value.
    # redo_dir: /redo
    # Please set devname as the network adaptor's name whose ip is  in the setting of severs.
    # if set severs as "127.0.0.1", please set devname as "lo"
    # if current ip is 192.168.1.10, and the ip's network adaptor's name is "eth0", please use "eth0"
    # devname: eth0
    # External port for OceanBase Database. The default value is 2881. DO NOT change this value after the cluster is started.
    # mysql_port: 2881
    # Internal port for OceanBase Database. The default value is 2882. DO NOT change this value after the cluster is started.
    # rpc_port: 2882
    # Defines the zone for an observer. The default value is zone1.
    # zone: zone1
    # The maximum running memory for an observer. When ignored, autodeploy calculates this value based on the current server available resource.
    # memory_limit: 58G
    # The percentage of the maximum available memory to the total memory. This value takes effect only when memory_limit is 0. The default value is 80.
    # memory_limit_percentage: 80 
    # The reserved system memory. system_memory is reserved for general tenants. The default value is 30G. Autodeploy calculates this value based on the current server available resource.
    # system_memory: 22G
    # The size of a data file. When ignored, autodeploy calculates this value based on the current server available resource.
    # datafile_size: 200G
    # The percentage of the data_dir space to the total disk space. This value takes effect only when datafile_size is 0. The default value is 90.
    # datafile_disk_percentage: 90
    # System log level. The default value is INFO.
    # syslog_level: INFO
    # Print system logs whose levels are higher than WARNING to a separate log file. The default value is true. The default value for autodeploy mode is false.
    # enable_syslog_wf: false
    # Enable auto system log recycling or not. The default value is false. The default value for autodeploy mode is on.
    # enable_syslog_recycle: true
    # The maximum number of reserved log files before enabling auto recycling. When set to 0, no logs are deleted. The default value for autodeploy mode is 4.
    # max_syslog_file_count: 4
    # Cluster name for OceanBase Database. The default value is obcluster. When you deploy OceanBase Database and obproxy, this value must be the same as the cluster_name for obproxy.
    # appname: obcluster
    # Password for root. The default value is empty.
    # root_password:
    # Password for proxyro. proxyro_password must be the same as observer_sys_password. The default value is empty.
    # proxyro_password:
  server1:
    zone: zone1
  server2:
    zone: zone2
  server3:
    zone: zone3
obproxy-ce:
  depends:
    - oceanbase-ce
  servers:
    - 192.168.1.5
  global:
    # The working directory for obproxy. Obproxy is started under this directory. This is a required field.
    home_path: /root/obproxy
    skip_proxy_sys_private_check: true
    enable_strict_kernel_release: false
    # External port. The default value is 2883.
    # listen_port: 2883
    # The Prometheus port. The default value is 2884.
    # prometheus_listen_port: 2884
    # rs_list is the root server list for observers. The default root server is the first server in the zone.
    # The format for rs_list is observer_ip:observer_mysql_port;observer_ip:observer_mysql_port.
    # Ignore this value in autodeploy mode.
    # rs_list: 127.0.0.1:2881
    # Cluster name for the proxy OceanBase Database. The default value is obcluster. This value must be set to the same with the appname for OceanBase Database.
    # cluster_name: obcluster
    # Password for obproxy system tenant. The default value is empty.
    # obproxy_sys_password:
    # Password for proxyro. proxyro_password must be the same with proxyro_password. The default value is empty.
    # observer_sys_password:
obagent:
  depends:
    - oceanbase-ce
  # The list of servers to be monitored. This list is consistent with the servers in oceanbase-ce. 
  servers:
    - name: server1
      # Please don't use hostname, only IP is supported.
      ip: 172.19.33.2
    - name: server2
      ip: 172.19.33.3
    - name: server3
      ip: 172.19.33.4
  # Set dependent components for the component.
  # When the associated configurations are not done, OBD will automatically get the these configurations from the dependent components.
  depends:
    - oceanbase-ce
  global:
    # The working directory for obagent. obagent is started under this directory. This is a required field.
    home_path: /root/obagent
    # The port that pulls and manages the metrics. The default port number is 8088.
    # server_port: 8088
    # Debug port for pprof. The default port number is 8089.
    # pprof_port: 8089
    # Log level. The default value is INFO.
    # log_level: INFO
    # Log path. The default value is log/monagent.log.
    # log_path: log/monagent.log
    # Encryption method. OBD supports aes and plain. The default value is plain.
    # crypto_method: plain
    # Path to store the crypto key. The default value is conf/.config_secret.key.
    # crypto_path: conf/.config_secret.key
    # Size for a single log file. Log size is measured in Megabytes. The default value is 30M.
    # log_size: 30
    # Expiration time for logs. The default value is 7 days.
    # log_expire_day: 7
    # The maximum number for log files. The default value is 10.
    # log_file_count: 10
    # Whether to use local time for log files. The default value is true.
    # log_use_localtime: true
    # Whether to enable log compression. The default value is true.
    # log_compress: true
    # Username for HTTP authentication. The default value is admin.
    # http_basic_auth_user: admin
    # Password for HTTP authentication. The default value is root.
    # http_basic_auth_password: root
    # Username for debug service. The default value is admin.
    # pprof_basic_auth_user: admin
    # Password for debug service. The default value is root.
    # pprof_basic_auth_password: root
    # Monitor username for OceanBase Database. The user must have read access to OceanBase Database as a system tenant. The default value is root.
    # monitor_user: root
    # Monitor password for OceanBase Database. The default value is empty. When a depends exists, OBD gets this value from the oceanbase-ce of the depends. The value is the same as the root_password in oceanbase-ce.
    # monitor_password: 
    # The SQL port for observer. The default value is 2881. When a depends exists, OBD gets this value from the oceanbase-ce of the depends. The value is the same as the mysql_port in oceanbase-ce.
    # sql_port: 2881
    # The RPC port for observer. The default value is 2882. When a depends exists, OBD gets this value from the oceanbase-ce of the depends. The value is the same as the rpc_port in oceanbase-ce.
    # rpc_port: 2882
    # Cluster name for OceanBase Database. When a depends exists, OBD gets this value from the oceanbase-ce of the depends. The value is the same as the appname in oceanbase-ce.
    # cluster_name: obcluster
    # Cluster ID for OceanBase Database. When a depends exists, OBD gets this value from the oceanbase-ce of the depends. The value is the same as the cluster_id in oceanbase-ce.
    # cluster_id: 1
    # Zone name for your observer. The default value is zone1. When a depends exists, OBD gets this value from the oceanbase-ce of the depends. The value is the same as the zone name in oceanbase-ce.
    # zone_name: zone1
    # Monitor status for OceanBase Database.  Active is to enable. Inactive is to disable. The default value is active. When you deploy an cluster automatically, OBD decides whether to enable this parameter based on depends.
    # ob_monitor_status: active
    # Monitor status for your host. Active is to enable. Inactive is to disable. The default value is active.
    # host_monitor_status: active
    # Whether to disable the basic authentication for HTTP service. True is to disable. False is to enable. The default value is false.
    # disable_http_basic_auth: false
    # Whether to disable the basic authentication for the debug interface. True is to disable. False is to enable. The default value is false.
    # disable_pprof_basic_auth: false