menu "Hardware Drivers Config"

config SOC_STM32MP157A
    bool
    select SOC_SERIES_STM32MP1
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config BSP_USING_STLINK_TO_USART
        bool "Enable STLINK TO USART (uart4)"
        select BSP_USING_UART
        select BSP_USING_UART4
        default y

    config BSP_USING_EXTI
        bool "Enable exti sample"
        default n

    config BSP_USING_PMIC
        bool "Enable PMIC"
        select BSP_USING_I2C
        select BSP_USING_I2C3
        default y

    config BSP_USING_PWR
        bool "Enable PM (power control)"
        default n

    config BSP_USING_RCC
        bool "Enable rcc use sample"
        default n

    config BSP_USING_OPENAMP
        bool "Enable OpenAMP"
        default n

    menuconfig BSP_USING_RS485
        bool "Enable RS485 "
        default n
        if BSP_USING_RS485
            comment "set rts pin number "
            config BSP_RS485_RTS_PIN
                int "RS485 rts pin number"
                range 1 176
                default 5

            config RS485_UART_DEVICE_NAME
            string "the uart name for rs485"
            default "uart3"

        endif

endmenu

menu "On-chip Peripheral Drivers"
    config BSP_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    config BSP_USING_WWDG
        bool "Enable WWDG"
        select RT_USING_WWDG
        default n

    menuconfig BSP_USING_UART
        bool "Enable UART"
        select RT_USING_SERIAL
        default y
        if BSP_USING_UART
            config BSP_USING_UART3
                bool "Enable UART3"
                default y
            config BSP_UART3_RX_USING_DMA
                bool "Enable UART3 RX DMA"
                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
                default n
            config BSP_UART3_TX_USING_DMA
                bool "Enable UART3 TX DMA"
                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
                default n

            config BSP_USING_UART4
                bool "Enable UART4"
                default y
            config BSP_UART4_RX_USING_DMA
                bool "Enable UART4 RX DMA"
                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
                default n
            config BSP_UART4_TX_USING_DMA
                bool "Enable UART4 TX DMA"
                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
                default n

        endif

    menuconfig BSP_USING_TIM
        bool "Enable timer"
        default n
        select RT_USING_HWTIMER
        if BSP_USING_TIM
            config BSP_USING_TIM14
                bool "Enable TIM14"
                default n

            config BSP_USING_TIM16
                bool "Enable TIM16"
                default n

            config BSP_USING_TIM17
                bool "Enable TIM17"
                default n

        endif
    menuconfig BSP_USING_LPTIM
        bool "Enable lptimer"
        default n
        select RT_USING_LPTIMER
        if BSP_USING_LPTIM
            config BSP_USING_LPTIM1
                bool "Enable LPTIM1"
                default n
        endif

    menuconfig BSP_USING_PWM
        bool "Enable pwm"
        default n
        select RT_USING_PWM
        if BSP_USING_PWM
        menuconfig BSP_USING_PWM4
            bool "Enable timer4 output pwm"
            default n
            if BSP_USING_PWM4
                config BSP_USING_PWM4_CH2
                    bool "Enable PWM4 channel2"
                    default n
            endif
        endif

    menuconfig BSP_USING_ADC
        bool "Enable ADC"
        default n
        select RT_USING_ADC
        if BSP_USING_ADC
            config BSP_USING_ADC2
                bool "Enable ADC2"
                select BSP_USING_PMIC
                default n
        endif

    menuconfig BSP_USING_DAC
        bool "Enable DAC"
        default n
        select RT_USING_DAC
        if BSP_USING_DAC
            config BSP_USING_DAC1
                bool "Enable DAC1"
                default n
        endif

    menuconfig BSP_USING_I2C
        bool "Enable I2C BUS (software simulation)"
        select RT_USING_I2C
        select RT_USING_I2C_BITOPS
        select RT_USING_PIN
        default n
        if BSP_USING_I2C
            menuconfig BSP_USING_I2C1
                bool "Enable I2C1 BUS (software simulation)"
                default n
                if BSP_USING_I2C1
                    comment "Notice: PD7 --> 55; PG15 --> 111"
                    config BSP_I2C1_SCL_PIN
                        int "I2C1 scl pin number"
                        range 1 176
                        default 55
                    config BSP_I2C1_SDA_PIN
                        int "I2C1 sda pin number"
                        range 1 176
                        default 111
                endif
            menuconfig BSP_USING_I2C2
                bool "Enable I2C2 BUS (software simulation)"
                default n
                if BSP_USING_I2C2
                    comment "Notice: PH4 --> 116; PH5 --> 117"
                    config BSP_I2C2_SCL_PIN
                        int "i2c2 scl pin number"
                        range 1 176
                        default 116
                    config BSP_I2C2_SDA_PIN
                        int "I2C2 sda pin number"
                        range 1 176
                        default 117
                endif
	    menuconfig BSP_USING_I2C3
                bool "Enable I2C3 BUS (software simulation)"
                default n
                if BSP_USING_I2C3
                    comment "Notice: PZ4 --> 180; PZ5 --> 181"
                    config BSP_I2C3_SCL_PIN
                        int "i2c3 scl pin number"
                        range 1 191
                        default 180
                    config BSP_I2C3_SDA_PIN
                        int "I2C3 sda pin number"
                        range 1 191
                        default 181
                endif
        endif

    menuconfig BSP_USING_SPI
        bool "Enable SPI BUS"
        select RT_USING_SPI
        default n
        if BSP_USING_SPI
            config BSP_USING_SPI5
                bool "Enable SPI5 BUS"
                default n

            config BSP_SPI5_TX_USING_DMA
                bool "Enable SPI5 TX DMA"
                depends on BSP_USING_SPI5
                default n

            config BSP_SPI5_RX_USING_DMA
                bool "Enable SPI5 RX DMA"
                depends on BSP_USING_SPI5
                select BSP_SPI5_TX_USING_DMA
                default n
        endif

 source "../libraries/HAL_Drivers/Kconfig"

endmenu

menu "Board extended module Drivers"

endmenu

endmenu