//***************************************************************************** // // hw_ints.h - Macros that define the interrupt assignment on Stellaris. // // Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 8264 of the Stellaris Firmware Development Package. // //***************************************************************************** #ifndef __HW_INTS_H__ #define __HW_INTS_H__ //***************************************************************************** // // The following are defines for the fault assignments. // //***************************************************************************** #define FAULT_NMI 2 // NMI fault #define FAULT_HARD 3 // Hard fault #define FAULT_MPU 4 // MPU fault #define FAULT_BUS 5 // Bus fault #define FAULT_USAGE 6 // Usage fault #define FAULT_SVCALL 11 // SVCall #define FAULT_DEBUG 12 // Debug monitor #define FAULT_PENDSV 14 // PendSV #define FAULT_SYSTICK 15 // System Tick //***************************************************************************** // // The following are defines for the interrupt assignments. // //***************************************************************************** #define INT_GPIOA 16 // GPIO Port A #define INT_GPIOB 17 // GPIO Port B #define INT_GPIOC 18 // GPIO Port C #define INT_GPIOD 19 // GPIO Port D #define INT_GPIOE 20 // GPIO Port E #define INT_UART0 21 // UART0 Rx and Tx #define INT_UART1 22 // UART1 Rx and Tx #define INT_SSI0 23 // SSI0 Rx and Tx #define INT_I2C0 24 // I2C0 Master and Slave #define INT_PWM0_FAULT 25 // PWM0 Fault #define INT_PWM0_0 26 // PWM0 Generator 0 #define INT_PWM0_1 27 // PWM0 Generator 1 #define INT_PWM0_2 28 // PWM0 Generator 2 #define INT_QEI0 29 // Quadrature Encoder 0 #define INT_ADC0SS0 30 // ADC0 Sequence 0 #define INT_ADC0SS1 31 // ADC0 Sequence 1 #define INT_ADC0SS2 32 // ADC0 Sequence 2 #define INT_ADC0SS3 33 // ADC0 Sequence 3 #define INT_WATCHDOG 34 // Watchdog timer #define INT_TIMER0A 35 // Timer 0 subtimer A #define INT_TIMER0B 36 // Timer 0 subtimer B #define INT_TIMER1A 37 // Timer 1 subtimer A #define INT_TIMER1B 38 // Timer 1 subtimer B #define INT_TIMER2A 39 // Timer 2 subtimer A #define INT_TIMER2B 40 // Timer 2 subtimer B #define INT_COMP0 41 // Analog Comparator 0 #define INT_COMP1 42 // Analog Comparator 1 #define INT_COMP2 43 // Analog Comparator 2 #define INT_SYSCTL 44 // System Control (PLL, OSC, BO) #define INT_FLASH 45 // FLASH Control #define INT_GPIOF 46 // GPIO Port F #define INT_GPIOG 47 // GPIO Port G #define INT_GPIOH 48 // GPIO Port H #define INT_UART2 49 // UART2 Rx and Tx #define INT_SSI1 50 // SSI1 Rx and Tx #define INT_TIMER3A 51 // Timer 3 subtimer A #define INT_TIMER3B 52 // Timer 3 subtimer B #define INT_I2C1 53 // I2C1 Master and Slave #define INT_QEI1 54 // Quadrature Encoder 1 #define INT_CAN0 55 // CAN0 #define INT_CAN1 56 // CAN1 #define INT_CAN2 57 // CAN2 #define INT_ETH 58 // Ethernet #define INT_HIBERNATE 59 // Hibernation module #define INT_USB0 60 // USB 0 Controller #define INT_PWM0_3 61 // PWM0 Generator 3 #define INT_UDMA 62 // uDMA controller #define INT_UDMAERR 63 // uDMA Error #define INT_ADC1SS0 64 // ADC1 Sequence 0 #define INT_ADC1SS1 65 // ADC1 Sequence 1 #define INT_ADC1SS2 66 // ADC1 Sequence 2 #define INT_ADC1SS3 67 // ADC1 Sequence 3 #define INT_I2S0 68 // I2S0 #define INT_EPI0 69 // EPI0 #define INT_GPIOJ 70 // GPIO Port J #define INT_GPIOK 71 // GPIO Port K #define INT_GPIOL 72 // GPIO Port L #define INT_SSI2 73 // SSI2 #define INT_SSI3 74 // SSI3 #define INT_UART3 75 // UART3 #define INT_UART4 76 // UART4 #define INT_UART5 77 // UART5 #define INT_UART6 78 // UART6 #define INT_UART7 79 // UART7 #define INT_I2C2 84 // I2C2 #define INT_I2C3 85 // I2C3 #define INT_TIMER4A 86 // Timer 4A #define INT_TIMER4B 87 // Timer 4B #define INT_TIMER5A 108 // Timer 5A #define INT_TIMER5B 109 // Timer 5B #define INT_WTIMER0A 110 // Wide Timer 0A #define INT_WTIMER0B 111 // Wide Timer 0B #define INT_WTIMER1A 112 // Wide Timer 1A #define INT_WTIMER1B 113 // Wide Timer 1B #define INT_WTIMER2A 114 // Wide Timer 2A #define INT_WTIMER2B 115 // Wide Timer 2B #define INT_WTIMER3A 116 // Wide Timer 3A #define INT_WTIMER3B 117 // Wide Timer 3B #define INT_WTIMER4A 118 // Wide Timer 4A #define INT_WTIMER4B 119 // Wide Timer 4B #define INT_WTIMER5A 120 // Wide Timer 5A #define INT_WTIMER5B 121 // Wide Timer 5B #define INT_SYSEXC 122 // System Exception (imprecise) #define INT_PECI0 123 // PECI 0 #define INT_LPC0 124 // LPC 0 #define INT_I2C4 125 // I2C4 #define INT_I2C5 126 // I2C5 #define INT_GPIOM 127 // GPIO Port M #define INT_GPION 128 // GPIO Port N #define INT_FAN0 130 // FAN 0 #define INT_GPIOP0 132 // GPIO Port P (Summary or P0) #define INT_GPIOP1 133 // GPIO Port P1 #define INT_GPIOP2 134 // GPIO Port P2 #define INT_GPIOP3 135 // GPIO Port P3 #define INT_GPIOP4 136 // GPIO Port P4 #define INT_GPIOP5 137 // GPIO Port P5 #define INT_GPIOP6 138 // GPIO Port P6 #define INT_GPIOP7 139 // GPIO Port P7 #define INT_GPIOQ0 140 // GPIO Port Q (Summary or Q0) #define INT_GPIOQ1 141 // GPIO Port Q1 #define INT_GPIOQ2 142 // GPIO Port Q2 #define INT_GPIOQ3 143 // GPIO Port Q3 #define INT_GPIOQ4 144 // GPIO Port Q4 #define INT_GPIOQ5 145 // GPIO Port Q5 #define INT_GPIOQ6 146 // GPIO Port Q6 #define INT_GPIOQ7 147 // GPIO Port Q7 #define INT_PWM1_0 150 // PWM1 Generator 0 #define INT_PWM1_1 151 // PWM1 Generator 1 #define INT_PWM1_2 152 // PWM1 Generator 2 #define INT_PWM1_3 153 // PWM1 Generator 3 #define INT_PWM1_FAULT 154 // PWM1 Fault //***************************************************************************** // // The following are defines for the total number of interrupts. // //***************************************************************************** #define NUM_INTERRUPTS 155 //***************************************************************************** // // The following are defines for the total number of priority levels. // //***************************************************************************** #define NUM_PRIORITY 8 #define NUM_PRIORITY_BITS 3 //***************************************************************************** // // The following definitions are deprecated. // //***************************************************************************** #ifndef DEPRECATED //***************************************************************************** // // The following are deprecated defines for the interrupt assignments. // //***************************************************************************** #define INT_SSI 23 // SSI Rx and Tx #define INT_I2C 24 // I2C Master and Slave #define INT_PWM_FAULT 25 // PWM Fault #define INT_PWM0 26 // PWM Generator 0 #define INT_PWM1 27 // PWM Generator 1 #define INT_PWM2 28 // PWM Generator 2 #define INT_QEI 29 // Quadrature Encoder #define INT_ADC0 30 // ADC Sequence 0 #define INT_ADC1 31 // ADC Sequence 1 #define INT_ADC2 32 // ADC Sequence 2 #define INT_ADC3 33 // ADC Sequence 3 #define INT_PWM3 61 // PWM Generator 3 #endif #endif // __HW_INTS_H__