//*****************************************************************************
//
// hw_eeprom.h - Macros used when accessing the EEPROM controller.
//
// Copyright (c) 2011 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
// 
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
// 
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
// 
// This is part of revision 8264 of the Stellaris Firmware Development Package.
//
//*****************************************************************************

#ifndef __HW_EEPROM_H__
#define __HW_EEPROM_H__

//*****************************************************************************
//
// The following are defines for the EEPROM register offsets.
//
//*****************************************************************************
#define EEPROM_EESIZE           0x400AF000  // EEPROM Size Information
#define EEPROM_EEBLOCK          0x400AF004  // EEPROM Current Block
#define EEPROM_EEOFFSET         0x400AF008  // EEPROM Current Offset
#define EEPROM_EERDWR           0x400AF010  // EEPROM Read-Write
#define EEPROM_EERDWRINC        0x400AF014  // EEPROM Read-Write with Increment
#define EEPROM_EEDONE           0x400AF018  // EEPROM Done Status
#define EEPROM_EESUPP           0x400AF01C  // EEPROM Support Control and
                                            // Status
#define EEPROM_EEUNLOCK         0x400AF020  // EEPROM Unlock
#define EEPROM_EEPROT           0x400AF030  // EEPROM Protection
#define EEPROM_EEPASS0          0x400AF034  // EEPROM Password
#define EEPROM_EEPASS1          0x400AF038  // EEPROM Password
#define EEPROM_EEPASS2          0x400AF03C  // EEPROM Password
#define EEPROM_EEINT            0x400AF040  // EEPROM Interrupt
#define EEPROM_EEHIDE           0x400AF050  // EEPROM Block Hide
#define EEPROM_EEDBGME          0x400AF080  // EEPROM Debug Mass Erase
#define EEPROM_EEPROMPP         0x400AFFC0  // EEPROM

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESIZE register.
//
//*****************************************************************************
#define EEPROM_EESIZE_WORDCNT_M 0x0000FFFF  // Number of 32-Bit Words
#define EEPROM_EESIZE_BLKCNT_M  0x07FF0000  // Number of 16-Word Blocks
#define EEPROM_EESIZE_WORDCNT_S 0
#define EEPROM_EESIZE_BLKCNT_S  16

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEBLOCK register.
//
//*****************************************************************************
#define EEPROM_EEBLOCK_BLOCK_M  0x0000FFFF  // Current Block
#define EEPROM_EEBLOCK_BLOCK_S  0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEOFFSET
// register.
//
//*****************************************************************************
#define EEPROM_EEOFFSET_OFFSET_M \
                                0x0000000F  // Current Address Offset
#define EEPROM_EEOFFSET_OFFSET_S \
                                0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWR register.
//
//*****************************************************************************
#define EEPROM_EERDWR_VALUE_M   0xFFFFFFFF  // EEPROM Read or Write Data
#define EEPROM_EERDWR_VALUE_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EERDWRINC
// register.
//
//*****************************************************************************
#define EEPROM_EERDWRINC_VALUE_M \
                                0xFFFFFFFF  // EEPROM Read or Write Data with
                                            // Increment
#define EEPROM_EERDWRINC_VALUE_S \
                                0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDONE register.
//
//*****************************************************************************
#define EEPROM_EEDONE_WORKING   0x00000001  // EEPROM Working
#define EEPROM_EEDONE_WKERASE   0x00000004  // Working on an Erase
#define EEPROM_EEDONE_WKCOPY    0x00000008  // Working on a Copy
#define EEPROM_EEDONE_NOPERM    0x00000010  // Write Without Permission
#define EEPROM_EEDONE_WRBUSY    0x00000020  // Write Busy
#define EEPROM_EEDONE_INVPL     0x00000100  // Invalid Program Voltage Level

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EESUPP register.
//
//*****************************************************************************
#define EEPROM_EESUPP_START     0x00000001  // Start Erase
#define EEPROM_EESUPP_EREQ      0x00000002  // Erase Required
#define EEPROM_EESUPP_ERETRY    0x00000004  // Erase Must Be Retried
#define EEPROM_EESUPP_PRETRY    0x00000008  // Programming Must Be Retried

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEUNLOCK
// register.
//
//*****************************************************************************
#define EEPROM_EEUNLOCK_UNLOCK_M \
                                0xFFFFFFFF  // EEPROM Unlock

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROT register.
//
//*****************************************************************************
#define EEPROM_EEPROT_PROT_M    0x00000007  // Protection Control
#define EEPROM_EEPROT_PROT_RWNPW \
                                0x00000000  // This setting is the default. If
                                            // there is no password, the block
                                            // is not protected and is readable
                                            // and writable
#define EEPROM_EEPROT_PROT_RWPW 0x00000001  // If there is a password, the
                                            // block is readable or writable
                                            // only when unlocked
#define EEPROM_EEPROT_PROT_RONPW \
                                0x00000002  // If there is no password, the
                                            // block is readable, not writable
#define EEPROM_EEPROT_ACC       0x00000008  // Access Control

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS0 register.
//
//*****************************************************************************
#define EEPROM_EEPASS0_PASS_M   0xFFFFFFFF  // Password
#define EEPROM_EEPASS0_PASS_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS1 register.
//
//*****************************************************************************
#define EEPROM_EEPASS1_PASS_M   0xFFFFFFFF  // Password
#define EEPROM_EEPASS1_PASS_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPASS2 register.
//
//*****************************************************************************
#define EEPROM_EEPASS2_PASS_M   0xFFFFFFFF  // Password
#define EEPROM_EEPASS2_PASS_S   0

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEINT register.
//
//*****************************************************************************
#define EEPROM_EEINT_INT        0x00000001  // Interrupt Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEHIDE register.
//
//*****************************************************************************
#define EEPROM_EEHIDE_HN_M      0xFFFFFFFE  // Hide Block

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEDBGME register.
//
//*****************************************************************************
#define EEPROM_EEDBGME_ME       0x00000001  // Mass Erase
#define EEPROM_EEDBGME_KEY_M    0xFFFF0000  // Erase Key
#define EEPROM_EEDBGME_KEY_S    16

//*****************************************************************************
//
// The following are defines for the bit fields in the EEPROM_EEPROMPP
// register.
//
//*****************************************************************************
#define EEPROM_EEPROMPP_SIZE_M  0x0000001F  // EEPROM Size
#define EEPROM_EEPROMPP_SIZE_S  0

#endif // __HW_EEPROM_H__