From 3344963e4b343950d46217b36bdc6760f06d805f Mon Sep 17 00:00:00 2001
From: "bernard.xiong" <bernard.xiong@gmail.com>
Date: Sun, 15 Nov 2009 14:45:03 +0000
Subject: [PATCH] add more STM32F107 support

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@165 bbd45198-f89e-11dd-88c7-29a3b14d5316
---
 bsp/stm3210/project.Uv2 |  2 +-
 bsp/stm3210/startup.c   | 16 ++--------------
 2 files changed, 3 insertions(+), 15 deletions(-)

diff --git a/bsp/stm3210/project.Uv2 b/bsp/stm3210/project.Uv2
index 617db90ed..aca0befb7 100644
--- a/bsp/stm3210/project.Uv2
+++ b/bsp/stm3210/project.Uv2
@@ -216,7 +216,7 @@ Options 1,0,0  // Target 'RT-Thread STM32'
  ADSLDMC (--keep __fsym_* --keep __vsym_*)
  ADSLDIF ()
  ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
+  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F107xCSchedule)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F107xC)
   OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
  FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
  FLASH2 (Segger\JL2CM3.dll)
diff --git a/bsp/stm3210/startup.c b/bsp/stm3210/startup.c
index 0ee8ddbde..e880f8580 100644
--- a/bsp/stm3210/startup.c
+++ b/bsp/stm3210/startup.c
@@ -26,11 +26,7 @@
 /*@{*/
 
 #ifdef RT_USING_LWIP
-#ifdef STM32F10X_CL
-	extern void rt_hw_stm32_eth_init(void);
-#else
-	#include "enc28j60.h"
-#endif
+#include "enc28j60.h"
 #include <netif/ethernetif.h>
 #endif
 
@@ -40,7 +36,6 @@ extern void finsh_system_init(void);
 extern void finsh_set_device(const char* device);
 #endif
 
-/* bss end definitions for heap init */
 #ifdef __CC_ARM
 extern int Image$$RW_IRAM1$$ZI$$Limit;
 #elif __ICCARM__
@@ -109,25 +104,18 @@ void rtthread_startup(void)
 
 	/* init hardware serial device */
 	rt_hw_usart_init();
-
-#ifdef RT_USING_DFS
 	/* init sdcard driver */
 #if STM32_USE_SDIO
 	rt_hw_sdcard_init();
 #else
 	rt_hw_msd_init();
 #endif
-#endif
 
 #ifdef RT_USING_LWIP
 	eth_system_device_init();
 
 	/* register ethernetif device */
-#ifdef STM32F10X_CL
-	rt_hw_stm32_eth_init();
-#else
 	rt_hw_enc28j60_init();
-#endif
 #endif
 
     rt_hw_rtc_init();
@@ -141,7 +129,7 @@ void rtthread_startup(void)
 #ifdef RT_USING_FINSH
 	/* init finsh */
 	finsh_system_init();
-	finsh_set_device(FINSH_DEVICE_NAME);
+	finsh_set_device("uart1");
 #endif
 
 	/* init idle thread */
-- 
GitLab