/**************************************************************************//** * @file nuc980.h * @brief NUC980 peripheral access layer header file. * This file contains all the peripheral register's definitions * and memory mapping for NuMicro NUC980 MPU. * * SPDX-License-Identifier: Apache-2.0 * @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ /** \mainpage NuMicro NUC980 Family Driver Reference Guide * * Introduction * * This user manual describes the usage of NUC980 family device driver * * Disclaimer * * The Software is furnished "AS IS", without warranty as to performance or results, and * the entire risk as to performance or results is assumed by YOU. Nuvoton disclaims all * warranties, express, implied or otherwise, with regard to the Software, its use, or * operation, including without limitation any and all warranties of merchantability, fitness * for a particular purpose, and non-infringement of intellectual property rights. * * Important Notice * * Nuvoton Products are neither intended nor warranted for usage in systems or equipment, * any malfunction or failure of which may cause loss of human life, bodily injury or severe * property damage. Such applications are deemed, "Insecure Usage". * * Insecure usage includes, but is not limited to: equipment for surgical implementation, * atomic energy control instruments, airplane or spaceship instruments, the control or * operation of dynamic, brake or safety systems designed for vehicular use, traffic signal * instruments, all types of safety devices, and other applications intended to support or * sustain life. * * All Insecure Usage shall be made at customer's risk, and in the event that third parties * lay claims to Nuvoton as a result of customer's Insecure Usage, customer shall indemnify * the damages and liabilities thus incurred by Nuvoton. * * Please note that all data and specifications are subject to change without notice. All the * trademarks of products and companies mentioned in this document belong to their respective * owners. * * Copyright Notice * * Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved. */ #ifndef __NUC980_H__ #define __NUC980_H__ #include /** @addtogroup NUC980_PERIPHERAL_MEM_MAP Peripheral Memory Base Memory Mapped Structure for NUC980 Peripheral @{ */ /*!< AHB peripherals */ #define SYS_BA 0xB0000000 /* Global Control */ #define CLK_BA 0xB0000200 /* Clock Control */ #define SDIC_BA 0xB0002000 #define EBI_BA 0xB0010000 /* EBI Control */ #define GPIO_BA 0xB0004000 #define PDMA0_BA 0xB0008000 #define PDMA1_BA 0xB0009000 #define EMC0_BA 0xB0012000 #define EHCI_BA 0xB0015000 #define USBD_BA 0xB0016000 #define OHCI_BA 0xB0017000 #define SDH_BA 0xB0018000 #define FMI_BA 0xB0019000 #define CRPT_BA 0xB001C000 #define I2S_BA 0xB0020000 #define EMC1_BA 0xB0022000 #define CAP0_BA 0xB0024000 #define CAP1_BA 0xB0014000 #define PA_BA 0xB0004000 #define PB_BA 0xB0004040 #define PC_BA 0xB0004080 #define PD_BA 0xB00040C0 #define PE_BA 0xB0004100 #define PF_BA 0xB0004140 #define PG_BA 0xB0004180 /*!< APB peripherals */ #define WDT_BA 0xB0040000 /* Watch Dog Timer */ #define WWDT_BA 0xB0040100 /* Windows Watch Dog Timer */ #define RTC_BA 0xB0041000 #define AIC_BA 0xB0042000 /* Interrupt Controller */ #define ADC_BA 0xB0043000 #define ETMR0_BA 0xB0050000 /* ETimer0 */ #define ETMR1_BA 0xB0050100 /* ETimer1 */ #define ETMR2_BA 0xB0051000 /* ETimer2 */ #define ETMR3_BA 0xB0051100 /* ETimer3 */ #define ETMR4_BA 0xB0052000 /* ETimer4 */ #define ETMR5_BA 0xB0052100 /* ETimer5 */ #define PWM0_BA 0xB0058000 #define PWM1_BA 0xB0059000 #define QSPI0_BA 0xB0060000 #define SPI0_BA 0xB0061000 #define SPI1_BA 0xB0062000 #define UART0_BA 0xB0070000 /* UART0 Control */ #define UART1_BA 0xB0071000 /* UART1 Control */ #define UART2_BA 0xB0072000 #define UART3_BA 0xB0073000 #define UART4_BA 0xB0074000 #define UART5_BA 0xB0075000 #define UART6_BA 0xB0076000 #define UART7_BA 0xB0077000 #define UART8_BA 0xB0078000 #define UART9_BA 0xB0079000 #define I2C0_BA 0xB0080000 #define I2C1_BA 0xB0081000 #define I2C2_BA 0xB0082000 #define I2C3_BA 0xB0083000 #define SC0_BA 0xB0090000 #define SC1_BA 0xB0091000 #define CAN0_BA 0xB00A0000 #define CAN1_BA 0xB00A1000 #define CAN2_BA 0xB00A2000 #define CAN3_BA 0xB00A3000 /*@}*/ /* end of group NUC980_PERIPHERAL_MEM_MAP */ /******************************************************************************/ /* Device Specific Peripheral registers structures */ /******************************************************************************/ /** @addtogroup REGISTER Control Register NUC980 Device Specific Peripheral registers structures @{ */ /*---------------------- System Manger Controller -------------------------*/ /** @addtogroup SYS System Manger Controller(SYS) Memory Mapped Structure for SYS Controller @{ */ #define REG_SYS_PDID (SYS_BA+0x000) /*!< Product Identifier Register */ #define REG_SYS_PWRON (SYS_BA+0x004) /*!< Power-On Setting Register */ #define REG_SYS_ARBCON (SYS_BA+0x008) /*!< Arbitration Control Register */ #define REG_SYS_LVRDCR (SYS_BA+0x020) /*!< Low Voltage Reset & Detect Control Register */ #define REG_SYS_MISCFCR (SYS_BA+0x030) /*!< Miscellaneous Function Control Register */ #define REG_SYS_MISCIER (SYS_BA+0x040) /*!< Miscellaneous Interrupt Enable Register */ #define REG_SYS_MISCISR (SYS_BA+0x044) /*!< Miscellaneous Interrupt Status Register */ #define REG_SYS_WKUPSER0 (SYS_BA+0x050) /*!< System Wakeup Source Enable Register0 */ #define REG_SYS_WKUPSER1 (SYS_BA+0x054) /*!< System Wakeup Source Enable Register1 */ #define REG_SYS_WKUPSSR0 (SYS_BA+0x058) /*!< System Wakeup Source Status Register0 */ #define REG_SYS_WKUPSSR1 (SYS_BA+0x05C) /*!< System Wakeup Source Status Register1 */ #define REG_SYS_AHBIPRST (SYS_BA+0x060) /*!< AHB IP Reset Control Register */ #define REG_SYS_APBIPRST0 (SYS_BA+0x064) /*!< APB IP Reset Control Register 0 */ #define REG_SYS_APBIPRST1 (SYS_BA+0x068) /*!< APB IP Reset Control Register 1 */ #define REG_SYS_RSTSTS (SYS_BA+0x06C) /*!< Reset Source Active Status Register */ #define REG_SYS_GPA_MFPL (SYS_BA+0x070) /*!< GPIOA Low Byte Multiple Function Control Register */ #define REG_SYS_GPA_MFPH (SYS_BA+0x074) /*!< GPIOA High Byte Multiple Function Control Register */ #define REG_SYS_GPB_MFPL (SYS_BA+0x078) /*!< GPIOB Low Byte Multiple Function Control Register */ #define REG_SYS_GPB_MFPH (SYS_BA+0x07C) /*!< GPIOB High Byte Multiple Function Control Register */ #define REG_SYS_GPC_MFPL (SYS_BA+0x080) /*!< GPIOC Low Byte Multiple Function Control Register */ #define REG_SYS_GPC_MFPH (SYS_BA+0x084) /*!< GPIOC High Byte Multiple Function Control Register */ #define REG_SYS_GPD_MFPL (SYS_BA+0x088) /*!< GPIOD Low Byte Multiple Function Control Register */ #define REG_SYS_GPD_MFPH (SYS_BA+0x08C) /*!< GPIOD High Byte Multiple Function Control Register */ #define REG_SYS_GPE_MFPL (SYS_BA+0x090) /*!< GPIOE Low Byte Multiple Function Control Register */ #define REG_SYS_GPE_MFPH (SYS_BA+0x094) /*!< GPIOE High Byte Multiple Function Control Register */ #define REG_SYS_GPF_MFPL (SYS_BA+0x098) /*!< GPIOF Low Byte Multiple Function Control Register */ #define REG_SYS_GPF_MFPH (SYS_BA+0x09C) /*!< GPIOF High Byte Multiple Function Control Register */ #define REG_SYS_GPG_MFPL (SYS_BA+0x0A0) /*!< GPIOG Low Byte Multiple Function Control Register */ #define REG_SYS_GPG_MFPH (SYS_BA+0x0A4) /*!< GPIOG High Byte Multiple Function Control Register */ #define REG_SYS_GPH_MFPL (SYS_BA+0x0A8) /*!< GPIOH Low Byte Multiple Function Control Register */ #define REG_SYS_GPH_MFPH (SYS_BA+0x0AC) /*!< GPIOH High Byte Multiple Function Control Register */ #define REG_SYS_GPI_MFPL (SYS_BA+0x0B0) /*!< GPIOI Low Byte Multiple Function Control Register */ #define REG_SYS_GPI_MFPH (SYS_BA+0x0B4) /*!< GPIOI High Byte Multiple Function Control Register */ #define REG_SYS_GPJ_MFPL (SYS_BA+0x0B8) /*!< GPIOJ Low Byte Multiple Function Control Register */ #define REG_SYS_DDR_DSCTL (SYS_BA+0x0F0) /*!< DDR I/O Driving Strength Control Register */ #define REG_SYS_PORDISCR (SYS_BA+0x100) /*!< Power-On-Reset Disable Control Register */ #define REG_SYS_ICEDBGCR (SYS_BA+0x104) /*!< ICE Debug Interface Control Register */ #define REG_SYS_ERRADDCR (SYS_BA+0x108) /*!< Error Response Address Control Regsiter */ #define REG_SYS_REGWPCTL (SYS_BA+0x1FC) /*!< Register Write-Protection Control Register */ /**@}*/ /* end of SYS register group */ /*---------------------- System Clock Controller -------------------------*/ /** @addtogroup CLK System Clock Controller(CLK) Memory Mapped Structure for CLK Controller @{ */ #define REG_CLK_PMCON (CLK_BA+0x00) /*!< Power Management Control Register */ #define REG_CLK_HCLKEN (CLK_BA+0x10) /*!< AHB IP Clock Enable Control Register */ #define REG_CLK_PCLKEN0 (CLK_BA+0x18) /*!< APB IP Clock Enable Control Register 0 */ #define REG_CLK_PCLKEN1 (CLK_BA+0x1C) /*!< APB IP Clock Enable Control Register 1 */ #define REG_CLK_DIVCTL0 (CLK_BA+0x20) /*!< Clock Divider Control Register 0 */ #define REG_CLK_DIVCTL1 (CLK_BA+0x24) /*!< Clock Divider Control Register 1 */ #define REG_CLK_DIVCTL2 (CLK_BA+0x28) /*!< Clock Divider Control Register 2 */ #define REG_CLK_DIVCTL3 (CLK_BA+0x2C) /*!< Clock Divider Control Register 3 */ #define REG_CLK_DIVCTL4 (CLK_BA+0x30) /*!< Clock Divider Control Register 4 */ #define REG_CLK_DIVCTL5 (CLK_BA+0x34) /*!< Clock Divider Control Register 5 */ #define REG_CLK_DIVCTL6 (CLK_BA+0x38) /*!< Clock Divider Control Register 6 */ #define REG_CLK_DIVCTL7 (CLK_BA+0x3C) /*!< Clock Divider Control Register 7 */ #define REG_CLK_DIVCTL8 (CLK_BA+0x40) /*!< Clock Divider Control Register 8 */ #define REG_CLK_DIVCTL9 (CLK_BA+0x44) /*!< Clock Divider Control Register 9 */ #define REG_CLK_APLLCON (CLK_BA+0x60) /*!< APLL Control Register */ #define REG_CLK_UPLLCON (CLK_BA+0x64) /*!< UPLL Control Register */ #define REG_CLK_PLLSTBCNTR (CLK_BA+0x80) /*!< PLL Stable Counter and Test Clock Control Register */ /**@}*/ /* end of CLK register group */ /*---------------------- External Bus Interface Controller -------------------------*/ /** @addtogroup EBI External Bus Interface Controller(EBI) Memory Mapped Structure for EBI Controller @{ */ #define REG_EBI_CTL (EBI_BA+0x000) /*!< EBI control register */ #define REG_EBI_BNKCTL0 (EBI_BA+0x018) /*!< External I/O 0 control register */ #define REG_EBI_BNKCTL1 (EBI_BA+0x01C) /*!< External I/O 1 control register */ #define REG_EBI_BNKCTL2 (EBI_BA+0x020) /*!< External I/O 2 control register */ #define REG_EBI_BNKCTL3 (EBI_BA+0x024) /*!< External I/O 3 control register */ #define REG_EBI_BNKCTL4 (EBI_BA+0x028) /*!< External I/O 4 control register */ /**@}*/ /* end of EBI register group */ /*---------------------- Analog to Digital Converter -------------------------*/ /** @addtogroup ADC Analog to Digital Converter(ADC) Memory Mapped Structure for ADC Controller @{ */ #define REG_ADC_CTL (ADC_BA+0x000) /*!< ADC Contrl */ #define REG_ADC_CONF (ADC_BA+0x004) /*!< ADC Configure */ #define REG_ADC_IER (ADC_BA+0x008) /*!< ADC Interrupt Enable Register */ #define REG_ADC_ISR (ADC_BA+0x00C) /*!< ADC Interrupt Status Register */ #define REG_ADC_WKISR (ADC_BA+0x010) /*!< ADC Wake Up Interrupt Status Register */ #define REG_ADC_XYDATA (ADC_BA+0x020) /*!< ADC Touch XY Pressure Data */ #define REG_ADC_ZDATA (ADC_BA+0x024) /*!< ADC Touch Z Pressure Data */ #define REG_ADC_DATA (ADC_BA+0x028) /*!< ADC Normal Conversion Data */ #define REG_ADC_VBADATA (ADC_BA+0x02C) /*!< ADC Battery Detection Data */ #define REG_ADC_KPDATA (ADC_BA+0x030) /*!< ADC Key Pad Data */ #define REG_ADC_SELFDATA (ADC_BA+0x034) /*!< ADC Self-Test Data */ #define REG_ADC_XYSORT0 (ADC_BA+0x1F4) /*!< ADC Touch XY Position Mean Value Sort 0 */ #define REG_ADC_XYSORT1 (ADC_BA+0x1F8) /*!< ADC Touch XY Position Mean Value Sort 1 */ #define REG_ADC_XYSORT2 (ADC_BA+0x1FC) /*!< ADC Touch XY Position Mean Value Sort 2 */ #define REG_ADC_XYSORT3 (ADC_BA+0x200) /*!< ADC Touch XY Position Mean Value Sort 3 */ #define REG_ADC_ZSORT0 (ADC_BA+0x204) /*!< ADC Touch Z Pressure Mean Value Sort 0 */ #define REG_ADC_ZSORT1 (ADC_BA+0x208) /*!< ADC Touch Z Pressure Mean Value Sort 1 */ #define REG_ADC_ZSORT2 (ADC_BA+0x20C) /*!< ADC Touch Z Pressure Mean Value Sort 2 */ #define REG_ADC_ZSORT3 (ADC_BA+0x210) /*!< ADC Touch Z Pressure Mean Value Sort 3 */ #define REG_ADC_MTMULCK (ADC_BA+0x220) /*!< ADC Manual Test Mode Unlock */ #define REG_ADC_MTCONF (ADC_BA+0x224) /*!< ADC Manual Test Mode Configure */ #define REG_ADC_MTCON (ADC_BA+0x228) /*!< ADC Manual Test Mode Control */ #define REG_ADC_ADCAII (ADC_BA+0x22C) /*!< ADC Analog Interface Information */ #define REG_ADC_ADCAIIRLT (ADC_BA+0x230) /*!< ADC Analog Interface Information Result */ /**@}*/ /* end of ADC register group */ /*---------------------- Ethernet MAC Controller -------------------------*/ /** @addtogroup EMAC Ethernet MAC Controller(EMAC) Memory Mapped Structure for EMAC Controller @{ */ #define REG_EMAC0_CAMCMR (EMC0_BA+0x000) /*!< CAM Command Register */ #define REG_EMAC0_CAMEN (EMC0_BA+0x004) /*!< CAM Enable Register */ #define REG_EMAC0_CAM0M (EMC0_BA+0x008) /*!< CAM0 Most Significant Word Register */ #define REG_EMAC0_CAM0L (EMC0_BA+0x00c) /*!< CAM0 Least Significant Word Register */ #define REG_EMAC0_CAMxM_Reg(x)(REG_EMAC0_CAM0M+(x)*0x8) /*!< CAMx Most Significant Word Register */ #define REG_EMAC0_CAMxL_Reg(x)(REG_EMAC0_CAM0L+(x)*0x8) /*!< CAMx Least Significant Word Register */ #define REG_EMAC0_TXDLSA (EMC0_BA+0x088) /*!< Transmit Descriptor Link List Start Address Register */ #define REG_EMAC0_RXDLSA (EMC0_BA+0x08C) /*!< Receive Descriptor Link List Start Address Register */ #define REG_EMAC0_MCMDR (EMC0_BA+0x090) /*!< MAC Command Register */ #define REG_EMAC0_MIID (EMC0_BA+0x094) /*!< MII Management Data Register */ #define REG_EMAC0_MIIDA (EMC0_BA+0x098) /*!< MII Management Control and Address Register */ #define REG_EMAC0_FFTCR (EMC0_BA+0x09C) /*!< FIFO Threshold Control Register */ #define REG_EMAC0_TSDR (EMC0_BA+0x0a0) /*!< Transmit Start Demand Register */ #define REG_EMAC0_RSDR (EMC0_BA+0x0a4) /*!< Receive Start Demand Register */ #define REG_EMAC0_DMARFC (EMC0_BA+0x0a8) /*!< Maximum Receive Frame Control Register */ #define REG_EMAC0_MIEN (EMC0_BA+0x0ac) /*!< MAC Interrupt Enable Register */ #define REG_EMAC0_MISTA (EMC0_BA+0x0b0) /*!< MAC Interrupt Status Register */ #define REG_EMAC0_MGSTA (EMC0_BA+0x0b4) /*!< MAC General Status Register */ #define REG_EMAC0_MPCNT (EMC0_BA+0x0b8) /*!< Missed Packet Count Register */ #define REG_EMAC0_MRPC (EMC0_BA+0x0bc) /*!< MAC Receive Pause Count Register */ #define REG_EMAC0_DMARFS (EMC0_BA+0x0c8) /*!< DMA Receive Frame Status Register */ #define REG_EMAC0_CTXDSA (EMC0_BA+0x0cc) /*!< Current Transmit Descriptor Start Address Register */ #define REG_EMAC0_CTXBSA (EMC0_BA+0x0d0) /*!< Current Transmit Buffer Start Address Register */ #define REG_EMAC0_CRXDSA (EMC0_BA+0x0d4) /*!< Current Receive Descriptor Start Address Register */ #define REG_EMAC0_CRXBSA (EMC0_BA+0x0d8) /*!< Current Receive Buffer Start Address Register */ #define REG_EMAC0_TSCTL (EMC0_BA+0x100) /*!< Time Stamp Control Register */ #define REG_EMAC0_TSSEC (EMC0_BA+0x110) /*!< Time Stamp Counter Second Register */ #define REG_EMAC0_TSSUBSEC (EMC0_BA+0x114) /*!< Time Stamp Counter Sub Second Register */ #define REG_EMAC0_TSINC (EMC0_BA+0x118) /*!< Time Stamp Increment Register */ #define REG_EMAC0_TSADDEN (EMC0_BA+0x11c) /*!< Time Stamp Addend Register */ #define REG_EMAC0_TSUPDSEC (EMC0_BA+0x120) /*!< Time Stamp Update Second Register */ #define REG_EMAC0_TSUPDSUBSEC (EMC0_BA+0x124) /*!< Time Stamp Update Sub Second Register */ #define REG_EMAC0_TSALMSEC (EMC0_BA+0x128) /*!< Time Stamp Alarm Second Register */ #define REG_EMAC0_TSALMSUBSEC (EMC0_BA+0x12c) /*!< Time Stamp Alarm Sub Second Register */ #define REG_EMAC1_CAMCMR (EMC1_BA+0x000) /*!< CAM Command Register */ #define REG_EMAC1_CAMEN (EMC1_BA+0x004) /*!< CAM Enable Register */ #define REG_EMAC1_CAM0M (EMC1_BA+0x008) /*!< CAM0 Most Significant Word Register */ #define REG_EMAC1_CAM0L (EMC1_BA+0x00c) /*!< CAM0 Least Significant Word Register */ #define REG_EMAC1_CAMxM_Reg(x)(REG_EMAC1_CAM0M+(x)*0x8) /*!< CAMx Most Significant Word Register */ #define REG_EMAC1_CAMxL_Reg(x)(REG_EMAC1_CAM0L+(x)*0x8) /*!< CAMx Least Significant Word Register */ #define REG_EMAC1_TXDLSA (EMC1_BA+0x088) /*!< Transmit Descriptor Link List Start Address Register */ #define REG_EMAC1_RXDLSA (EMC1_BA+0x08C) /*!< Receive Descriptor Link List Start Address Register */ #define REG_EMAC1_MCMDR (EMC1_BA+0x090) /*!< MAC Command Register */ #define REG_EMAC1_MIID (EMC1_BA+0x094) /*!< MII Management Data Register */ #define REG_EMAC1_MIIDA (EMC1_BA+0x098) /*!< MII Management Control and Address Register */ #define REG_EMAC1_FFTCR (EMC1_BA+0x09C) /*!< FIFO Threshold Control Register */ #define REG_EMAC1_TSDR (EMC1_BA+0x0a0) /*!< Transmit Start Demand Register */ #define REG_EMAC1_RSDR (EMC1_BA+0x0a4) /*!< Receive Start Demand Register */ #define REG_EMAC1_DMARFC (EMC1_BA+0x0a8) /*!< Maximum Receive Frame Control Register */ #define REG_EMAC1_MIEN (EMC1_BA+0x0ac) /*!< MAC Interrupt Enable Register */ #define REG_EMAC1_MISTA (EMC1_BA+0x0b0) /*!< MAC Interrupt Status Register */ #define REG_EMAC1_MGSTA (EMC1_BA+0x0b4) /*!< MAC General Status Register */ #define REG_EMAC1_MPCNT (EMC1_BA+0x0b8) /*!< Missed Packet Count Register */ #define REG_EMAC1_MRPC (EMC1_BA+0x0bc) /*!< MAC Receive Pause Count Register */ #define REG_EMAC1_DMARFS (EMC1_BA+0x0c8) /*!< DMA Receive Frame Status Register */ #define REG_EMAC1_CTXDSA (EMC1_BA+0x0cc) /*!< Current Transmit Descriptor Start Address Register */ #define REG_EMAC1_CTXBSA (EMC1_BA+0x0d0) /*!< Current Transmit Buffer Start Address Register */ #define REG_EMAC1_CRXDSA (EMC1_BA+0x0d4) /*!< Current Receive Descriptor Start Address Register */ #define REG_EMAC1_CRXBSA (EMC1_BA+0x0d8) /*!< Current Receive Buffer Start Address Register */ #define REG_EMAC1_TSCTL (EMC1_BA+0x100) /*!< Time Stamp Control Register */ #define REG_EMAC1_TSSEC (EMC1_BA+0x110) /*!< Time Stamp Counter Second Register */ #define REG_EMAC1_TSSUBSEC (EMC1_BA+0x114) /*!< Time Stamp Counter Sub Second Register */ #define REG_EMAC1_TSINC (EMC1_BA+0x118) /*!< Time Stamp Increment Register */ #define REG_EMAC1_TSADDEN (EMC1_BA+0x11c) /*!< Time Stamp Addend Register */ #define REG_EMAC1_TSUPDSEC (EMC1_BA+0x120) /*!< Time Stamp Update Second Register */ #define REG_EMAC1_TSUPDSUBSEC (EMC1_BA+0x124) /*!< Time Stamp Update Sub Second Register */ #define REG_EMAC1_TSALMSEC (EMC1_BA+0x128) /*!< Time Stamp Alarm Second Register */ #define REG_EMAC1_TSALMSUBSEC (EMC1_BA+0x12c) /*!< Time Stamp Alarm Sub Second Register */ /**@}*/ /* end of EMAC register group */ /*---------------------- USB Device Controller -------------------------*/ /** @addtogroup USBD USB Device Controller(USBD) Memory Mapped Structure for USBD Controller @{ */ #define REG_USBD_GINTSTS (USBD_BA+0x00) /*!< Interrupt Status Low Register */ #define REG_USBD_GINTEN (USBD_BA+0x08) /*!< Interrupt Enable Low Register */ #define REG_USBD_BUSINTSTS (USBD_BA+0x10) /*!< USB Bus Interrupt Status Register */ #define REG_USBD_BUSINTEN (USBD_BA+0x14) /*!< USB Bus Interrupt Enable Register */ #define REG_USBD_OPER (USBD_BA+0x18) /*!< USB Operational Register */ #define REG_USBD_FRAMECNT (USBD_BA+0x1C) /*!< USB Frame Count Register */ #define REG_USBD_FADDR (USBD_BA+0x20) /*!< USB Function Address Register */ #define REG_USBD_TEST (USBD_BA+0x24) /*!< USB Test Mode Register */ #define REG_USBD_CEPDAT (USBD_BA+0x28) /*!< Control-ep data buffer register */ #define REG_USBD_CEPCTL (USBD_BA+0x2C) /*!< Control-ep control and status register */ #define REG_USBD_CEPINTEN (USBD_BA+0x30) /*!< Control-ep interrupt enable register */ #define REG_USBD_CEPINTSTS (USBD_BA+0x34) /*!< Control-ep interrupt status register */ #define REG_USBD_CEPTXCNT (USBD_BA+0x38) /*!< In-transfer data count register */ #define REG_USBD_CEPRXCNT (USBD_BA+0x3C) /*!< Out-transfer data count register */ #define REG_USBD_CEPDATCNT (USBD_BA+0x40) /*!< Control-ep data count register */ #define REG_USBD_SETUP1_0 (USBD_BA+0x44) /*!< Setup byte1 & byte0 register */ #define REG_USBD_SETUP3_2 (USBD_BA+0x48) /*!< Setup byte3 & byte2 register */ #define REG_USBD_SETUP5_4 (USBD_BA+0x4C) /*!< Setup byte5 & byte4 register */ #define REG_USBD_SETUP7_6 (USBD_BA+0x50) /*!< Setup byte7 & byte6 register */ #define REG_USBD_CEPBUFSTART (USBD_BA+0x54) /*!< Control-ep ram start address register */ #define REG_USBD_CEPBUFEND (USBD_BA+0x58) /*!< Control-ep ram end address register */ #define REG_USBD_DMACTL (USBD_BA+0x5C) /*!< Dma control and status register */ #define REG_USBD_DMACNT (USBD_BA+0x60) /*!< Dma count register */ #define REG_USBD_EPADAT (USBD_BA+0x64) /*!< Endpoint A data buffer register */ #define REG_USBD_EPAINTSTS (USBD_BA+0x68) /*!< Endpoint A interrupt status register */ #define REG_USBD_EPAINTEN (USBD_BA+0x6C) /*!< Endpoint A interrupt enable register */ #define REG_USBD_EPADATCNT (USBD_BA+0x70) /*!< Data count available in endpoint A buffer */ #define REG_USBD_EPARSPCTL (USBD_BA+0x74) /*!< Endpoint A response register set/clear */ #define REG_USBD_EPAMPS (USBD_BA+0x78) /*!< Endpoint A max packet size register */ #define REG_USBD_EPATXCNT (USBD_BA+0x7C) /*!< Endpoint A transfer count register */ #define REG_USBD_EPACFG (USBD_BA+0x80) /*!< Endpoint A configuration register */ #define REG_USBD_EPABUFSTART (USBD_BA+0x84) /*!< Endpoint A ram start address register */ #define REG_USBD_EPABUFEND (USBD_BA+0x88) /*!< Endpoint A ram end address register */ #define REG_USBD_EPBDAT (USBD_BA+0x8C) /*!< Endpoint B data buffer register */ #define REG_USBD_EPBINTSTS (USBD_BA+0x90) /*!< Endpoint B interrupt status register */ #define REG_USBD_EPBINTEN (USBD_BA+0x94) /*!< Endpoint B interrupt enable register */ #define REG_USBD_EPBDATCNT (USBD_BA+0x98) /*!< Data count available in endpoint B buffer */ #define REG_USBD_EPBRSPCTL (USBD_BA+0x9C) /*!< Endpoint B response register set/clear */ #define REG_USBD_EPBMPS (USBD_BA+0xA0) /*!< Endpoint B max packet size register */ #define REG_USBD_EPBTXCNT (USBD_BA+0xA4) /*!< Endpoint B transfer count register */ #define REG_USBD_EPBCFG (USBD_BA+0xA8) /*!< Endpoint B configuration register */ #define REG_USBD_EPBBUFSTART (USBD_BA+0xAC) /*!< Endpoint B ram start address register */ #define REG_USBD_EPBBUFEND (USBD_BA+0xB0) /*!< Endpoint B ram end address register */ #define REG_USBD_EPCDAT (USBD_BA+0xB4) /*!< Endpoint C data buffer register */ #define REG_USBD_EPCINTSTS (USBD_BA+0xB8) /*!< Endpoint C interrupt status register */ #define REG_USBD_EPCINTEN (USBD_BA+0xBC) /*!< Endpoint C interrupt enable register */ #define REG_USBD_EPCDATCNT (USBD_BA+0xC0) /*!< Data count available in endpoint C buffer */ #define REG_USBD_EPCRSPCTL (USBD_BA+0xC4) /*!< Endpoint C response register set/clear */ #define REG_USBD_EPCMPS (USBD_BA+0xC8) /*!< Endpoint C max packet size register */ #define REG_USBD_EPCTXCNT (USBD_BA+0xCC) /*!< Endpoint C transfer count register */ #define REG_USBD_EPCCFG (USBD_BA+0xD0) /*!< Endpoint C configuration register */ #define REG_USBD_EPCBUFSTART (USBD_BA+0xD4) /*!< Endpoint C ram start address register */ #define REG_USBD_EPCBUFEND (USBD_BA+0xD8) /*!< Endpoint C ram end address register */ #define REG_USBD_EPDDAT (USBD_BA+0xDC) /*!< Endpoint D data buffer register */ #define REG_USBD_EPDINTSTS (USBD_BA+0xE0) /*!< Endpoint D interrupt status register */ #define REG_USBD_EPDINTEN (USBD_BA+0xE4) /*!< Endpoint D interrupt enable register */ #define REG_USBD_EPDDATCNT (USBD_BA+0xE8) /*!< Data count available in endpoint D buffer */ #define REG_USBD_EPDRSPCTL (USBD_BA+0xEC) /*!< Endpoint D response register set/clear */ #define REG_USBD_EPDMPS (USBD_BA+0xF0) /*!< Endpoint D max packet size register */ #define REG_USBD_EPDTXCNT (USBD_BA+0xF4) /*!< Endpoint D transfer count register */ #define REG_USBD_EPDCFG (USBD_BA+0xF8) /*!< Endpoint D configuration register */ #define REG_USBD_EPDBUFSTART (USBD_BA+0xFC) /*!< Endpoint D ram start address register */ #define REG_USBD_EPDBUFEND (USBD_BA+0x100) /*!< Endpoint D ram end address register */ #define REG_USBD_EPEDAT (USBD_BA+0x104) /*!< Endpoint E data buffer register */ #define REG_USBD_EPEINTSTS (USBD_BA+0x108) /*!< Endpoint E interrupt status register */ #define REG_USBD_EPEINTEN (USBD_BA+0x10C) /*!< Endpoint E interrupt enable register */ #define REG_USBD_EPEDATCNT (USBD_BA+0x110) /*!< Data count available in endpoint E buffer */ #define REG_USBD_EPERSPCTL (USBD_BA+0x114) /*!< Endpoint E response register set/clear */ #define REG_USBD_EPEMPS (USBD_BA+0x118) /*!< Endpoint E max packet size register */ #define REG_USBD_EPETXCNT (USBD_BA+0x11C) /*!< Endpoint E transfer count register */ #define REG_USBD_EPECFG (USBD_BA+0x120) /*!< Endpoint E configuration register */ #define REG_USBD_EPEBUFSTART (USBD_BA+0x124) /*!< Endpoint E ram start address register */ #define REG_USBD_EPEBUFEND (USBD_BA+0x128) /*!< Endpoint E ram end address register */ #define REG_USBD_EPFDAT (USBD_BA+0x12C) /*!< Endpoint F data buffer register */ #define REG_USBD_EPFINTSTS (USBD_BA+0x130) /*!< Endpoint F interrupt status register */ #define REG_USBD_EPFINTEN (USBD_BA+0x134) /*!< Endpoint F interrupt enable register */ #define REG_USBD_EPFDATCNT (USBD_BA+0x138) /*!< Data count available in endpoint F buffer */ #define REG_USBD_EPFRSPCTL (USBD_BA+0x13C) /*!< Endpoint F response register set/clear */ #define REG_USBD_EPFMPS (USBD_BA+0x140) /*!< Endpoint F max packet size register */ #define REG_USBD_EPFTXCNT (USBD_BA+0x144) /*!< Endpoint F transfer count register */ #define REG_USBD_EPFCFG (USBD_BA+0x148) /*!< Endpoint F configuration register */ #define REG_USBD_EPFBUFSTART (USBD_BA+0x14C) /*!< Endpoint F ram start address register */ #define REG_USBD_EPFBUFEND (USBD_BA+0x150) /*!< Endpoint F ram end address register */ #define REG_USBD_EPGDAT (USBD_BA+0x154) /*!< Endpoint G data buffer register */ #define REG_USBD_EPGINTSTS (USBD_BA+0x158) /*!< Endpoint G interrupt status register */ #define REG_USBD_EPGINTEN (USBD_BA+0x15C) /*!< Endpoint G interrupt enable register */ #define REG_USBD_EPGDATCNT (USBD_BA+0x160) /*!< Data count available in endpoint G buffer */ #define REG_USBD_EPGRSPCTL (USBD_BA+0x164) /*!< Endpoint G response register set/clear */ #define REG_USBD_EPGMPS (USBD_BA+0x168) /*!< Endpoint G max packet size register */ #define REG_USBD_EPGTXCNT (USBD_BA+0x16C) /*!< Endpoint G transfer count register */ #define REG_USBD_EPGCFG (USBD_BA+0x170) /*!< Endpoint G configuration register */ #define REG_USBD_EPGBUFSTART (USBD_BA+0x174) /*!< Endpoint G ram start address register */ #define REG_USBD_EPGBUFEND (USBD_BA+0x178) /*!< Endpoint G ram end address register */ #define REG_USBD_EPHDAT (USBD_BA+0x17C) /*!< Endpoint H data buffer register */ #define REG_USBD_EPHINTSTS (USBD_BA+0x180) /*!< Endpoint H interrupt status register */ #define REG_USBD_EPHINTEN (USBD_BA+0x184) /*!< Endpoint H interrupt enable register */ #define REG_USBD_EPHDATCNT (USBD_BA+0x188) /*!< Data count available in endpoint H buffer */ #define REG_USBD_EPHRSPCTL (USBD_BA+0x18C) /*!< Endpoint H response register set/clear */ #define REG_USBD_EPHMPS (USBD_BA+0x190) /*!< Endpoint H max packet size register */ #define REG_USBD_EPHTXCNT (USBD_BA+0x194) /*!< Endpoint H transfer count register */ #define REG_USBD_EPHCFG (USBD_BA+0x198) /*!< Endpoint H configuration register */ #define REG_USBD_EPHBUFSTART (USBD_BA+0x19C) /*!< Endpoint H ram start address register */ #define REG_USBD_EPHBUFEND (USBD_BA+0x1A0) /*!< Endpoint H ram end address register */ #define REG_USBD_EPIDAT (USBD_BA+0x1A4) /*!< Endpoint I data buffer register */ #define REG_USBD_EPIINTSTS (USBD_BA+0x1A8) /*!< Endpoint I interrupt status register */ #define REG_USBD_EPIINTEN (USBD_BA+0x1AC) /*!< Endpoint I interrupt enable register */ #define REG_USBD_EPIDATCNT (USBD_BA+0x1B0) /*!< Data count available in endpoint I buffer */ #define REG_USBD_EPIRSPCTL (USBD_BA+0x1B4) /*!< Endpoint I response register set/clear */ #define REG_USBD_EPIMPS (USBD_BA+0x1B8) /*!< Endpoint I max packet size register */ #define REG_USBD_EPITXCNT (USBD_BA+0x1BC) /*!< Endpoint I transfer count register */ #define REG_USBD_EPICFG (USBD_BA+0x1C0) /*!< Endpoint I configuration register */ #define REG_USBD_EPIBUFSTART (USBD_BA+0x1C4) /*!< Endpoint I ram start address register */ #define REG_USBD_EPIBUFEND (USBD_BA+0x1C8) /*!< Endpoint I ram end address register */ #define REG_USBD_EPJDAT (USBD_BA+0x1CC) /*!< Endpoint J data buffer register */ #define REG_USBD_EPJINTSTS (USBD_BA+0x1D0) /*!< Endpoint J interrupt status register */ #define REG_USBD_EPJINTEN (USBD_BA+0x1D4) /*!< Endpoint J interrupt enable register */ #define REG_USBD_EPJDATCNT (USBD_BA+0x1D8) /*!< Data count available in endpoint J buffer */ #define REG_USBD_EPJRSPCTL (USBD_BA+0x1DC) /*!< Endpoint J response register set/clear */ #define REG_USBD_EPJMPS (USBD_BA+0x1E0) /*!< Endpoint J max packet size register */ #define REG_USBD_EPJTXCNT (USBD_BA+0x1E4) /*!< Endpoint J transfer count register */ #define REG_USBD_EPJCFG (USBD_BA+0x1E8) /*!< Endpoint J configuration register */ #define REG_USBD_EPJBUFSTART (USBD_BA+0x1EC) /*!< Endpoint J ram start address register */ #define REG_USBD_EPJBUFEND (USBD_BA+0x1F0) /*!< Endpoint J ram end address register */ #define REG_USBD_EPKDAT (USBD_BA+0x1F4) /*!< Endpoint K data buffer register */ #define REG_USBD_EPKINTSTS (USBD_BA+0x1F8) /*!< Endpoint K interrupt status register */ #define REG_USBD_EPKINTEN (USBD_BA+0x1FC) /*!< Endpoint K interrupt enable register */ #define REG_USBD_EPKDATCNT (USBD_BA+0x200) /*!< Data count available in endpoint K buffer */ #define REG_USBD_EPKRSPCTL (USBD_BA+0x204) /*!< Endpoint K response register set/clear */ #define REG_USBD_EPKMPS (USBD_BA+0x208) /*!< Endpoint K max packet size register */ #define REG_USBD_EPKTXCNT (USBD_BA+0x20C) /*!< Endpoint K transfer count register */ #define REG_USBD_EPKCFG (USBD_BA+0x210) /*!< Endpoint K configuration register */ #define REG_USBD_EPKBUFSTART (USBD_BA+0x214) /*!< Endpoint K ram start address register */ #define REG_USBD_EPKBUFEND (USBD_BA+0x218) /*!< Endpoint K ram end address register */ #define REG_USBD_EPLDAT (USBD_BA+0x21C) /*!< Endpoint L data buffer register */ #define REG_USBD_EPLINTSTS (USBD_BA+0x220) /*!< Endpoint L interrupt status register */ #define REG_USBD_EPLINTEN (USBD_BA+0x224) /*!< Endpoint L interrupt enable register */ #define REG_USBD_EPLDATCNT (USBD_BA+0x228) /*!< Data count available in endpoint L buffer */ #define REG_USBD_EPLRSPCTL (USBD_BA+0x22C) /*!< Endpoint L response register set/clear */ #define REG_USBD_EPLMPS (USBD_BA+0x230) /*!< Endpoint L max packet size register */ #define REG_USBD_EPLTXCNT (USBD_BA+0x234) /*!< Endpoint L transfer count register */ #define REG_USBD_EPLCFG (USBD_BA+0x238) /*!< Endpoint L configuration register */ #define REG_USBD_EPLBUFSTART (USBD_BA+0x23C) /*!< Endpoint L ram start address register */ #define REG_USBD_EPLBUFEND (USBD_BA+0x240) /*!< Endpoint L ram end address register */ #define REG_USBD_DMAADDR (USBD_BA+0x700) /*!< AHB_DMA address register */ #define REG_USBD_PHYCTL (USBD_BA+0x704) /*!< USB PHY control register */ /**@}*/ /* end of USBD register group */ /*---------------------- I2S Interface Controller -------------------------*/ /** @addtogroup I2S I2S Interface Controller(I2S) Memory Mapped Structure for I2S Controller @{ */ #define REG_I2S_CON (I2S_BA+0x00) /*!< Audio controller control register */ #define REG_I2S_RESET (I2S_BA+0x04) /*!< Sub block reset control register */ #define REG_I2S_RDESB (I2S_BA+0x08) /*!< DMA destination base address register for record */ #define REG_I2S_RDES_LENGTH (I2S_BA+0x0C) /*!< DMA destination length register for record */ #define REG_I2S_RDESC (I2S_BA+0x10) /*!< DMA destination current address for record */ #define REG_I2S_PDESB (I2S_BA+0x14) /*!< DMA destination current address for play */ #define REG_I2S_PDES_LENGTH (I2S_BA+0x18) /*!< DMA destination length register for play */ #define REG_I2S_PDESC (I2S_BA+0x1C) /*!< DMA destination current address register for play */ #define REG_I2S_RSR (I2S_BA+0x20) /*!< Record status register */ #define REG_I2S_PSR (I2S_BA+0x24) /*!< Play status register */ #define REG_I2S_I2SCON (I2S_BA+0x28) /*!< I2S control register */ #define REG_I2S_COUNTER (I2S_BA+0x2C) /*!< DMA count down values */ #define REG_I2S_PCMCON (I2S_BA+0x30) /*!< PCM interface control register */ #define REG_I2S_PCMS1ST (I2S_BA+0x34) /*!< PCM interface slot1 start register */ #define REG_I2S_PCMS2ST (I2S_BA+0x38) /*!< PCM interface slot2 start register */ #define REG_I2S_RDESB2 (I2S_BA+0x40) /*!< DMA destination base address register for record right channel */ #define REG_I2S_PDESB2 (I2S_BA+0x44) /*!< DMA destination base address register for play right channel */ /**@}*/ /* end of I2S register group */ /*---------------------- Flash Memory Interface -------------------------*/ /** @addtogroup FMI Flash Memory Interface(FMI) Memory Mapped Structure for FMI Controller @{ */ /* DMAC Control Registers*/ #define REG_FMI_BUFFER (FMI_BA+0x000) /*!< FMI Embedded Buffer Word */ #define REG_FMI_DMACTL (FMI_BA+0x400) /*!< FMI DMA Control Register */ #define REG_FMI_DMASA (FMI_BA+0x408) /*!< FMI DMA Transfer Starting Address Register */ #define REG_FMI_DMABCNT (FMI_BA+0x40C) /*!< FMI DMA Transfer Byte Count Register */ #define REG_FMI_DMAINTEN (FMI_BA+0x410) /*!< FMI DMA Interrupt Enable Register */ #define REG_FMI_DMAINTSTS (FMI_BA+0x414) /*!< FMI DMA Interrupt Status Register */ #define REG_FMI_CTL (FMI_BA+0x800) /*!< Global Control and Status Register */ #define REG_FMI_INTEN (FMI_BA+0x804) /*!< Global Interrupt Control Register */ #define REG_FMI_INTSTS (FMI_BA+0x808) /*!< Global Interrupt Status Register */ /* eMMC Registers */ #define REG_FMI_EMMCCTL (FMI_BA+0x820) /*!< eMMC control and status register */ #define REG_FMI_EMMCCMD (FMI_BA+0x824) /*!< eMMC command argument register */ #define REG_FMI_EMMCINTEN (FMI_BA+0x828) /*!< eMMC interrupt enable register */ #define REG_FMI_EMMCINTSTS (FMI_BA+0x82C) /*!< eMMC interrupt status register */ #define REG_FMI_EMMCRESP0 (FMI_BA+0x830) /*!< eMMC receive response token register 0 */ #define REG_FMI_EMMCRESP1 (FMI_BA+0x834) /*!< eMMC receive response token register 1 */ #define REG_FMI_EMMCBLEN (FMI_BA+0x838) /*!< eMMC block length register */ #define REG_FMI_EMMCTOUT (FMI_BA+0x83C) /*!< eMMC block length register */ /* NAND-type Flash Registers */ #define REG_NANDCTL (FMI_BA+0x8A0) /*!< NAND Flash Control and Status Register */ #define REG_NANDTMCTL (FMI_BA+0x8A4) /*!< NAND Flash Timing Control Register */ #define REG_NANDINTEN (FMI_BA+0x8A8) /*!< NAND Flash Interrupt Control Register */ #define REG_NANDINTSTS (FMI_BA+0x8AC) /*!< NAND Flash Interrupt Status Register */ #define REG_NANDCMD (FMI_BA+0x8B0) /*!< NAND Flash Command Port Register */ #define REG_NANDADDR (FMI_BA+0x8B4) /*!< NAND Flash Address Port Register */ #define REG_NANDDATA (FMI_BA+0x8B8) /*!< NAND Flash Data Port Register */ #define REG_NANDRACTL (FMI_BA+0x8BC) /*!< NAND Flash Redundant Area Control Register */ #define REG_NANDECTL (FMI_BA+0x8C0) /*!< NAND Flash Extend Control Regsiter */ #define REG_NANDECCES0 (FMI_BA+0x8D0) /*!< NAND Flash ECC Error Status 0 */ #define REG_NANDECCES1 (FMI_BA+0x8D4) /*!< NAND Flash ECC Error Status 1 */ #define REG_NANDECCES2 (FMI_BA+0x8D8) /*!< NAND Flash ECC Error Status 2 */ #define REG_NANDECCES3 (FMI_BA+0x8DC) /*!< NAND Flash ECC Error Status 3 */ #define REG_NANDPROTA0 (FMI_BA+0x8E0) /*!< NAND Flash Protect Region End Address 0 */ #define REG_NANDPROTA1 (FMI_BA+0x8E4) /*!< NAND Flash Protect Region End Address 1 */ /* NAND-type Flash BCH Error Address Registers */ #define REG_NANDECCEA0 (FMI_BA+0x900) /*!< NAND Flash ECC Error Byte Address 0 */ #define REG_NANDECCEA1 (FMI_BA+0x904) /*!< NAND Flash ECC Error Byte Address 1 */ #define REG_NANDECCEA2 (FMI_BA+0x908) /*!< NAND Flash ECC Error Byte Address 2 */ #define REG_NANDECCEA3 (FMI_BA+0x90C) /*!< NAND Flash ECC Error Byte Address 3 */ #define REG_NANDECCEA4 (FMI_BA+0x910) /*!< NAND Flash ECC Error Byte Address 4 */ #define REG_NANDECCEA5 (FMI_BA+0x914) /*!< NAND Flash ECC Error Byte Address 5 */ #define REG_NANDECCEA6 (FMI_BA+0x918) /*!< NAND Flash ECC Error Byte Address 6 */ #define REG_NANDECCEA7 (FMI_BA+0x91C) /*!< NAND Flash ECC Error Byte Address 7 */ #define REG_NANDECCEA8 (FMI_BA+0x920) /*!< NAND Flash ECC Error Byte Address 8 */ #define REG_NANDECCEA9 (FMI_BA+0x924) /*!< NAND Flash ECC Error Byte Address 9 */ #define REG_NANDECCEA10 (FMI_BA+0x928) /*!< NAND Flash ECC Error Byte Address 10 */ #define REG_NANDECCEA11 (FMI_BA+0x92C) /*!< NAND Flash ECC Error Byte Address 11 */ /* NAND-type Flash BCH Error Data Registers */ #define REG_NANDECCED0 (FMI_BA+0x960) /*!< NAND Flash ECC Error Data Register 0 */ #define REG_NANDECCED1 (FMI_BA+0x964) /*!< NAND Flash ECC Error Data Register 1 */ #define REG_NANDECCED2 (FMI_BA+0x968) /*!< NAND Flash ECC Error Data Register 2 */ #define REG_NANDECCED3 (FMI_BA+0x96C) /*!< NAND Flash ECC Error Data Register 3 */ #define REG_NANDECCED4 (FMI_BA+0x970) /*!< NAND Flash ECC Error Data Register 4 */ #define REG_NANDECCED5 (FMI_BA+0x974) /*!< NAND Flash ECC Error Data Register 5 */ /* NAND-type Flash Redundant Area Registers */ #define REG_NANDRA0 (FMI_BA+0xA00) /*!< NAND Flash Redundant Area Register */ #define REG_NANDRA1 (FMI_BA+0xA04) /*!< NAND Flash Redundant Area Register */ /**@}*/ /* end of FMI register group */ /*---------------------- SD/SDIO Host Controller -------------------------*/ /** @addtogroup SDH SD/SDIO Host Controller(SDH) Memory Mapped Structure for SDH Controller @{ */ /* DMAC Control Registers*/ #define REG_SDH_FB0 (SDH_BA+0x000) /*!< SD Host Embedded Buffer Word */ #define REG_SDH_DMACTL (SDH_BA+0x400) /*!< SD Host DMA Control and Status Register */ #define REG_SDH_DMASA (SDH_BA+0x408) /*!< SD Host DMA Transfer Starting Address Register */ #define REG_SDH_DMABCNT (SDH_BA+0x40C) /*!< SD Host DMA Transfer Byte Count Register */ #define REG_SDH_DMAINTEN (SDH_BA+0x410) /*!< SD Host DMA Interrupt Enable Register */ #define REG_SDH_DMAINTSTS (SDH_BA+0x414) /*!< SD Host DMA Interrupt Status Register */ #define REG_SDH_GCTL (SDH_BA+0x800) /*!< SD Host Global Control and Status Register */ #define REG_SDH_GINTEN (SDH_BA+0x804) /*!< SD Host Global Interrupt Control Register */ #define REG_SDH_GINTSTS (SDH_BA+0x808) /*!< SD Host Global Interrupt Status Register */ /* Secure Digit Registers */ #define REG_SDH_CTL (SDH_BA+0x820) /*!< SD Host control and status register */ #define REG_SDH_CMD (SDH_BA+0x824) /*!< SD Host command argument register */ #define REG_SDH_INTEN (SDH_BA+0x828) /*!< SD Host interrupt enable register */ #define REG_SDH_INTSTS (SDH_BA+0x82C) /*!< SD Host interrupt status register */ #define REG_SDH_RESP0 (SDH_BA+0x830) /*!< SD Host receive response token register 0 */ #define REG_SDH_RESP1 (SDH_BA+0x834) /*!< SD Host receive response token register 1 */ #define REG_SDH_BLEN (SDH_BA+0x838) /*!< SD Host block length register */ #define REG_SDH_TMOUT (SDH_BA+0x83C) /*!< SD Host Response/Data-in Time-out register */ #define REG_SDH_ECTL (SDH_BA+0x840) /*!< SD Host Extend Control Register */ /**@}*/ /* end of SDH register group */ /*---------------------- Serial Peripheral Interface Controller -------------------------*/ /** @addtogroup SPI Serial Peripheral Interface Controller(SPI) Memory Mapped Structure for SPI Controller @{ */ #define REG_QSPI0_CTL (QSPI0_BA+0x00) /*!< Control Register Address */ #define REG_QSPI0_CLKDIV (QSPI0_BA+0x04) /*!< Divider Register Address */ #define REG_QSPI0_SSCTL (QSPI0_BA+0x08) /*!< Slave Select Register Address */ #define REG_QSPI0_PDMACTL (QSPI0_BA+0x0C) /*!< PDMA Control Register Address */ #define REG_QSPI0_FIFOCTL (QSPI0_BA+0x10) /*!< FIFO Control Register Address */ #define REG_QSPI0_STATUS (QSPI0_BA+0x14) /*!< Status Register Address */ #define REG_QSPI0_TX (QSPI0_BA+0x20) /*!< Data Transmit Register Address */ #define REG_QSPI0_RX (QSPI0_BA+0x30) /*!< Data Receive Register Address */ #define REG_SPI0_CTL (SPI0_BA+0x00) /*!< Control Register Address */ #define REG_SPI0_CLKDIV (SPI0_BA+0x04) /*!< Divider Register Address */ #define REG_SPI0_SSCTL (SPI0_BA+0x08) /*!< Slave Select Register Address */ #define REG_SPI0_PDMACTL (SPI0_BA+0x0C) /*!< PDMA Control Register Address */ #define REG_SPI0_FIFOCTL (SPI0_BA+0x10) /*!< FIFO Control Register Address */ #define REG_SPI0_STATUS (SPI0_BA+0x14) /*!< Status Register Address */ #define REG_SPI0_TX (SPI0_BA+0x20) /*!< Data Transmit Register Address */ #define REG_SPI0_RX (SPI0_BA+0x30) /*!< Data Receive Register Address */ #define REG_SPI1_CTL (SPI1_BA+0x00) /*!< Control Register Address */ #define REG_SPI1_CLKDIV (SPI1_BA+0x04) /*!< Divider Register Address */ #define REG_SPI1_SSCTL (SPI1_BA+0x08) /*!< Slave Select Register Address */ #define REG_SPI1_PDMACTL (SPI1_BA+0x0C) /*!< PDMA Control Register Address */ #define REG_SPI1_FIFOCTL (SPI1_BA+0x10) /*!< FIFO Control Register Address */ #define REG_SPI1_STATUS (SPI1_BA+0x14) /*!< Status Register Address */ #define REG_SPI1_TX (SPI1_BA+0x20) /*!< Data Transmit Register Address */ #define REG_SPI1_RX (SPI1_BA+0x30) /*!< Data Receive Register Address */ /**@}*/ /* end of SPI register group */ /*---------------------- Cryptographic Accelerator -------------------------*/ /** @addtogroup CRYPTO Cryptographic Accelerator(CRYPTO) Memory Mapped Structure for Cryptographic Accelerator registers @{ */ /* Crypto Control Registers */ #define CRPT_INTEN (CRPT_BA+0x000) /*!< Crypto Interrupt Enable Control Register */ #define CRPT_INTSTS (CRPT_BA+0x004) /*!< Crypto Interrupt Flag */ /* PRNG Registers */ #define CRPT_PRNG_CTL (CRPT_BA+0x008) /*!< PRNG Control Register */ #define CRPT_PRNG_SEED (CRPT_BA+0x00C) /*!< Seed for PRNG */ #define CRPT_PRNG_KEY0 (CRPT_BA+0x010) /*!< PRNG Generated Key 0 */ #define CRPT_PRNG_KEY1 (CRPT_BA+0x014) /*!< PRNG Generated Key 1 */ #define CRPT_PRNG_KEY2 (CRPT_BA+0x018) /*!< PRNG Generated Key 2 */ #define CRPT_PRNG_KEY3 (CRPT_BA+0x01C) /*!< PRNG Generated Key 3 */ #define CRPT_PRNG_KEY4 (CRPT_BA+0x020) /*!< PRNG Generated Key 4 */ #define CRPT_PRNG_KEY5 (CRPT_BA+0x024) /*!< PRNG Generated Key 5 */ #define CRPT_PRNG_KEY6 (CRPT_BA+0x028) /*!< PRNG Generated Key 6 */ #define CRPT_PRNG_KEY7 (CRPT_BA+0x02C) /*!< PRNG Generated Key 7 */ /* AES/TDES feedback Registers */ #define CRPT_AES_FDBCK0 (CRPT_BA+0x050) /*!< AES Engine Output Feedback Data after Cryptographic Operation */ #define CRPT_AES_FDBCK1 (CRPT_BA+0x054) /*!< AES Engine Output Feedback Data after Cryptographic Operation */ #define CRPT_AES_FDBCK2 (CRPT_BA+0x058) /*!< AES Engine Output Feedback Data after Cryptographic Operation */ #define CRPT_AES_FDBCK3 (CRPT_BA+0x05C) /*!< AES Engine Output Feedback Data after Cryptographic Operation */ #define CRPT_TDES_FDBCKH (CRPT_BA+0x060) /*!< TDES/DES Engine Output Feedback High Word Data after Cryptographic Operation */ #define CRPT_TDES_FDBCKL (CRPT_BA+0x064) /*!< TDES/DES Engine Output Feedback Low Word Data after Cryptographic Operation */ /* AES Control Registers */ #define CRPT_AES_CTL (CRPT_BA+0x100) /*!< AES Control Register */ #define CRPT_AES_STS (CRPT_BA+0x104) /*!< AES Engine Flag */ #define CRPT_AES_DATIN (CRPT_BA+0x108) /*!< AES Engine Data Input Port Register */ #define CRPT_AES_DATOUT (CRPT_BA+0x10C) /*!< AES Engine Data Output Port Register */ #define CRPT_AES0_KEY0 (CRPT_BA+0x110) /*!< AES Key Word 0 Register for Channel 0 */ #define CRPT_AES0_KEY1 (CRPT_BA+0x114) /*!< AES Key Word 1 Register for Channel 0 */ #define CRPT_AES0_KEY2 (CRPT_BA+0x118) /*!< AES Key Word 2 Register for Channel 0 */ #define CRPT_AES0_KEY3 (CRPT_BA+0x11C) /*!< AES Key Word 3 Register for Channel 0 */ #define CRPT_AES0_KEY4 (CRPT_BA+0x120) /*!< AES Key Word 4 Register for Channel 0 */ #define CRPT_AES0_KEY5 (CRPT_BA+0x124) /*!< AES Key Word 5 Register for Channel 0 */ #define CRPT_AES0_KEY6 (CRPT_BA+0x128) /*!< AES Key Word 6 Register for Channel 0 */ #define CRPT_AES0_KEY7 (CRPT_BA+0x12C) /*!< AES Key Word 7 Register for Channel 0 */ #define CRPT_AES0_IV0 (CRPT_BA+0x130) /*!< AES Initial Vector Word 0 Register for Channel 0 */ #define CRPT_AES0_IV1 (CRPT_BA+0x134) /*!< AES Initial Vector Word 1 Register for Channel 0 */ #define CRPT_AES0_IV2 (CRPT_BA+0x138) /*!< AES Initial Vector Word 2 Register for Channel 0 */ #define CRPT_AES0_IV3 (CRPT_BA+0x13C) /*!< AES Initial Vector Word 3 Register for Channel 0 */ #define CRPT_AES0_SADDR (CRPT_BA+0x140) /*!< AES DMA Source Address Register for Channel 0 */ #define CRPT_AES0_DADDR (CRPT_BA+0x144) /*!< AES DMA Destination Address Register for Channel 0 */ #define CRPT_AES0_CNT (CRPT_BA+0x148) /*!< AES Byte Count Register for Channel 0 */ #define CRPT_AES1_KEY0 (CRPT_BA+0x14C) /*!< AES Key Word 0 Register for Channel 1 */ #define CRPT_AES1_KEY1 (CRPT_BA+0x150) /*!< AES Key Word 1 Register for Channel 1 */ #define CRPT_AES1_KEY2 (CRPT_BA+0x154) /*!< AES Key Word 2 Register for Channel 1 */ #define CRPT_AES1_KEY3 (CRPT_BA+0x158) /*!< AES Key Word 3 Register for Channel 1 */ #define CRPT_AES1_KEY4 (CRPT_BA+0x15C) /*!< AES Key Word 4 Register for Channel 1 */ #define CRPT_AES1_KEY5 (CRPT_BA+0x160) /*!< AES Key Word 5 Register for Channel 1 */ #define CRPT_AES1_KEY6 (CRPT_BA+0x164) /*!< AES Key Word 6 Register for Channel 1 */ #define CRPT_AES1_KEY7 (CRPT_BA+0x168) /*!< AES Key Word 7 Register for Channel 1 */ #define CRPT_AES1_IV0 (CRPT_BA+0x16C) /*!< AES Initial Vector Word 0 Register for Channel 1 */ #define CRPT_AES1_IV1 (CRPT_BA+0x170) /*!< AES Initial Vector Word 1 Register for Channel 1 */ #define CRPT_AES1_IV2 (CRPT_BA+0x174) /*!< AES Initial Vector Word 2 Register for Channel 1 */ #define CRPT_AES1_IV3 (CRPT_BA+0x178) /*!< AES Initial Vector Word 3 Register for Channel 1 */ #define CRPT_AES1_SADDR (CRPT_BA+0x17C) /*!< AES DMA Source Address Register for Channel 1 */ #define CRPT_AES1_DADDR (CRPT_BA+0x180) /*!< AES DMA Destination Address Register for Channel 1 */ #define CRPT_AES1_CNT (CRPT_BA+0x184) /*!< AES Byte Count Register for Channel 1 */ #define CRPT_AES2_KEY0 (CRPT_BA+0x188) /*!< AES Key Word 0 Register for Channel 2 */ #define CRPT_AES2_KEY1 (CRPT_BA+0x18C) /*!< AES Key Word 1 Register for Channel 2 */ #define CRPT_AES2_KEY2 (CRPT_BA+0x190) /*!< AES Key Word 2 Register for Channel 2 */ #define CRPT_AES2_KEY3 (CRPT_BA+0x194) /*!< AES Key Word 3 Register for Channel 2 */ #define CRPT_AES2_KEY4 (CRPT_BA+0x198) /*!< AES Key Word 4 Register for Channel 2 */ #define CRPT_AES2_KEY5 (CRPT_BA+0x19C) /*!< AES Key Word 5 Register for Channel 2 */ #define CRPT_AES2_KEY6 (CRPT_BA+0x1A0) /*!< AES Key Word 6 Register for Channel 2 */ #define CRPT_AES2_KEY7 (CRPT_BA+0x1A4) /*!< AES Key Word 7 Register for Channel 2 */ #define CRPT_AES2_IV0 (CRPT_BA+0x1A8) /*!< AES Initial Vector Word 0 Register for Channel 2 */ #define CRPT_AES2_IV1 (CRPT_BA+0x1AC) /*!< AES Initial Vector Word 1 Register for Channel 2 */ #define CRPT_AES2_IV2 (CRPT_BA+0x1B0) /*!< AES Initial Vector Word 2 Register for Channel 2 */ #define CRPT_AES2_IV3 (CRPT_BA+0x1B4) /*!< AES Initial Vector Word 3 Register for Channel 2 */ #define CRPT_AES2_SADDR (CRPT_BA+0x1B8) /*!< AES DMA Source Address Register for Channel 2 */ #define CRPT_AES2_DADDR (CRPT_BA+0x1BC) /*!< AES DMA Destination Address Register for Channel 2 */ #define CRPT_AES2_CNT (CRPT_BA+0x1C0) /*!< AES Byte Count Register for Channel 2 */ #define CRPT_AES3_KEY0 (CRPT_BA+0x1C4) /*!< AES Key Word 0 Register for Channel 3 */ #define CRPT_AES3_KEY1 (CRPT_BA+0x1C8) /*!< AES Key Word 1 Register for Channel 3 */ #define CRPT_AES3_KEY2 (CRPT_BA+0x1CC) /*!< AES Key Word 2 Register for Channel 3 */ #define CRPT_AES3_KEY3 (CRPT_BA+0x1D0) /*!< AES Key Word 3 Register for Channel 3 */ #define CRPT_AES3_KEY4 (CRPT_BA+0x1D4) /*!< AES Key Word 4 Register for Channel 3 */ #define CRPT_AES3_KEY5 (CRPT_BA+0x1D8) /*!< AES Key Word 5 Register for Channel 3 */ #define CRPT_AES3_KEY6 (CRPT_BA+0x1DC) /*!< AES Key Word 6 Register for Channel 3 */ #define CRPT_AES3_KEY7 (CRPT_BA+0x1E0) /*!< AES Key Word 7 Register for Channel 3 */ #define CRPT_AES3_IV0 (CRPT_BA+0x1E4) /*!< AES Initial Vector Word 0 Register for Channel 3 */ #define CRPT_AES3_IV1 (CRPT_BA+0x1E8) /*!< AES Initial Vector Word 1 Register for Channel 3 */ #define CRPT_AES3_IV2 (CRPT_BA+0x1EC) /*!< AES Initial Vector Word 2 Register for Channel 3 */ #define CRPT_AES3_IV3 (CRPT_BA+0x1F0) /*!< AES Initial Vector Word 3 Register for Channel 3 */ #define CRPT_AES3_SADDR (CRPT_BA+0x1F4) /*!< AES DMA Source Address Register for Channel 3 */ #define CRPT_AES3_DADDR (CRPT_BA+0x1F8) /*!< AES DMA Destination Address Register for Channel 3 */ #define CRPT_AES3_CNT (CRPT_BA+0x1FC) /*!< AES Byte Count Register for Channel 3 */ /* DES/TDES Control Registers */ #define CRPT_TDES_CTL (CRPT_BA+0x200) /*!< TDES/DES Control Register */ #define CRPT_TDES_STS (CRPT_BA+0x204) /*!< TDES/DES Engine Flag */ #define CRPT_TDES0_KEY1H (CRPT_BA+0x208) /*!< TDES/DES Key 1 High Word Register for Channel 0 */ #define CRPT_TDES0_KEY1L (CRPT_BA+0x20C) /*!< TDES/DES Key 1 Low Word Register for Channel 0 */ #define CRPT_TDES0_KEY2H (CRPT_BA+0x210) /*!< TDES/DES Key 2 High Word Register for Channel 0 */ #define CRPT_TDES0_KEY2L (CRPT_BA+0x214) /*!< TDES/DES Key 2 Low Word Register for Channel 0 */ #define CRPT_TDES0_KEY3H (CRPT_BA+0x218) /*!< TDES/DES Key 3 High Word Register for Channel 0 */ #define CRPT_TDES0_KEY3L (CRPT_BA+0x21C) /*!< TDES/DES Key 3 Low Word Register for Channel 0 */ #define CRPT_TDES0_IVH (CRPT_BA+0x220) /*!< TDES/DES Initial Vector High Word Register for Channel 0 */ #define CRPT_TDES0_IVL (CRPT_BA+0x224) /*!< TDES/DES Initial Vector Low Word Register for Channel 0 */ #define CRPT_TDES0_SADDR (CRPT_BA+0x228) /*!< TDES/DES DMA Source Address Register for Channel 0 */ #define CRPT_TDES0_DADDR (CRPT_BA+0x22C) /*!< TDES/DES DMA Destination Address Register for Channel 0 */ #define CRPT_TDES0_CNT (CRPT_BA+0x230) /*!< TDES/DES Byte Count Register for Channel 0 */ #define CRPT_TDES_DATIN (CRPT_BA+0x234) /*!< TDES/DES Engine Input data Word Register */ #define CRPT_TDES_DATOUT (CRPT_BA+0x238) /*!< TDES/DES Engine Output data Word Register */ #define CRPT_TDES1_KEY1H (CRPT_BA+0x248) /*!< TDES/DES Key 1 High Word Register for Channel 1 */ #define CRPT_TDES1_KEY1L (CRPT_BA+0x24C) /*!< TDES/DES Key 1 Low Word Register for Channel 1 */ #define CRPT_TDES1_KEY2H (CRPT_BA+0x250) /*!< TDES/DES Key 2 High Word Register for Channel 1 */ #define CRPT_TDES1_KEY2L (CRPT_BA+0x254) /*!< TDES/DES Key 2 Low Word Register for Channel 1 */ #define CRPT_TDES1_KEY3H (CRPT_BA+0x258) /*!< TDES/DES Key 3 High Word Register for Channel 1 */ #define CRPT_TDES1_KEY3L (CRPT_BA+0x25C) /*!< TDES/DES Key 3 Low Word Register for Channel 1 */ #define CRPT_TDES1_IVH (CRPT_BA+0x260) /*!< TDES/DES Initial Vector High Word Register for Channel 1 */ #define CRPT_TDES1_IVL (CRPT_BA+0x264) /*!< TDES/DES Initial Vector Low Word Register for Channel 1 */ #define CRPT_TDES1_SADDR (CRPT_BA+0x268) /*!< TDES/DES DMA Source Address Register for Channel 1 */ #define CRPT_TDES1_DADDR (CRPT_BA+0x26C) /*!< TDES/DES DMA Destination Address Register for Channel 1 */ #define CRPT_TDES1_CNT (CRPT_BA+0x270) /*!< TDES/DES Byte Count Register for Channel 1 */ #define CRPT_TDES2_KEY1H (CRPT_BA+0x288) /*!< TDES/DES Key 1 High Word Register for Channel 2 */ #define CRPT_TDES2_KEY1L (CRPT_BA+0x28C) /*!< TDES/DES Key 1 Low Word Register for Channel 2 */ #define CRPT_TDES2_KEY2H (CRPT_BA+0x290) /*!< TDES/DES Key 2 High Word Register for Channel 2 */ #define CRPT_TDES2_KEY2L (CRPT_BA+0x294) /*!< TDES/DES Key 2 Low Word Register for Channel 2 */ #define CRPT_TDES2_KEY3H (CRPT_BA+0x298) /*!< TDES/DES Key 3 High Word Register for Channel 2 */ #define CRPT_TDES2_KEY3L (CRPT_BA+0x29C) /*!< TDES/DES Key 3 Low Word Register for Channel 2 */ #define CRPT_TDES2_IVH (CRPT_BA+0x2A0) /*!< TDES/DES Initial Vector High Word Register for Channel 2 */ #define CRPT_TDES2_IVL (CRPT_BA+0x2A4) /*!< TDES/DES Initial Vector Low Word Register for Channel 2 */ #define CRPT_TDES2_SADDR (CRPT_BA+0x2A8) /*!< TDES/DES DMA Source Address Register for Channel 2 */ #define CRPT_TDES2_DADDR (CRPT_BA+0x2AC) /*!< TDES/DES DMA Destination Address Register for Channel 2 */ #define CRPT_TDES2_CNT (CRPT_BA+0x2B0) /*!< TDES/DES Byte Count Register for Channel 3 */ #define CRPT_TDES3_KEY1H (CRPT_BA+0x2C8) /*!< TDES/DES Key 1 High Word Register for Channel 3 */ #define CRPT_TDES3_KEY1L (CRPT_BA+0x2CC) /*!< TDES/DES Key 1 Low Word Register for Channel 3 */ #define CRPT_TDES3_KEY2H (CRPT_BA+0x2D0) /*!< TDES/DES Key 2 High Word Register for Channel 3 */ #define CRPT_TDES3_KEY2L (CRPT_BA+0x2D4) /*!< TDES/DES Key 2 Low Word Register for Channel 3 */ #define CRPT_TDES3_KEY3H (CRPT_BA+0x2D8) /*!< TDES/DES Key 3 High Word Register for Channel 3 */ #define CRPT_TDES3_KEY3L (CRPT_BA+0x2DC) /*!< TDES/DES Key 3 Low Word Register for Channel 3 */ #define CRPT_TDES3_IVH (CRPT_BA+0x2E0) /*!< TDES/DES Initial Vector High Word Register for Channel 3 */ #define CRPT_TDES3_IVL (CRPT_BA+0x2E4) /*!< TDES/DES Initial Vector Low Word Register for Channel 3 */ #define CRPT_TDES3_SADDR (CRPT_BA+0x2E8) /*!< TDES/DES DMA Source Address Register for Channel 3 */ #define CRPT_TDES3_DADDR (CRPT_BA+0x2EC) /*!< TDES/DES DMA Destination Address Register for Channel 3 */ #define CRPT_TDES3_CNT (CRPT_BA+0x2F0) /*!< TDES/DES Byte Count Register for Channel 3 */ /* SHA/HMAC Control Registers */ #define CRPT_HMAC_CTL (CRPT_BA+0x300) /*!< SHA/HMAC Control Register */ #define CRPT_HMAC_STS (CRPT_BA+0x304) /*!< SHA/HMAC Status Flag */ #define CRPT_HMAC_DGST0 (CRPT_BA+0x308) /*!< SHA/HMAC Digest Message 0 */ #define CRPT_HMAC_DGST1 (CRPT_BA+0x30C) /*!< SHA/HMAC Digest Message 1 */ #define CRPT_HMAC_DGST2 (CRPT_BA+0x310) /*!< SHA/HMAC Digest Message 2 */ #define CRPT_HMAC_DGST3 (CRPT_BA+0x314) /*!< SHA/HMAC Digest Message 3 */ #define CRPT_HMAC_DGST4 (CRPT_BA+0x318) /*!< SHA/HMAC Digest Message 4 */ #define CRPT_HMAC_DGST5 (CRPT_BA+0x31C) /*!< SHA/HMAC Digest Message 5 */ #define CRPT_HMAC_DGST6 (CRPT_BA+0x320) /*!< SHA/HMAC Digest Message 6 */ #define CRPT_HMAC_DGST7 (CRPT_BA+0x324) /*!< SHA/HMAC Digest Message 7 */ #define CRPT_HMAC_DGST8 (CRPT_BA+0x328) /*!< SHA/HMAC Digest Message 8 */ #define CRPT_HMAC_DGST9 (CRPT_BA+0x32C) /*!< SHA/HMAC Digest Message 8 */ #define CRPT_HMAC_DGST10 (CRPT_BA+0x330) /*!< SHA/HMAC Digest Message 10 */ #define CRPT_HMAC_DGST11 (CRPT_BA+0x334) /*!< SHA/HMAC Digest Message 11 */ #define CRPT_HMAC_DGST12 (CRPT_BA+0x338) /*!< SHA/HMAC Digest Message 12 */ #define CRPT_HMAC_DGST13 (CRPT_BA+0x33C) /*!< SHA/HMAC Digest Message 13 */ #define CRPT_HMAC_DGST14 (CRPT_BA+0x340) /*!< SHA/HMAC Digest Message 14 */ #define CRPT_HMAC_DGST15 (CRPT_BA+0x344) /*!< SHA/HMAC Digest Message 15 */ #define CRPT_HMAC_KEYCNT (CRPT_BA+0x348) /*!< SHA/HMAC Key Byte Count */ #define CRPT_HMAC_SADDR (CRPT_BA+0x34C) /*!< SHA/HMAC Key Byte Count */ #define CRPT_HMAC_DMACNT (CRPT_BA+0x350) /*!< SHA/HMAC Byte Count Register */ #define CRPT_HMAC_DATIN (CRPT_BA+0x354) /*!< SHA/HMAC Engine Non-DMA Mode Data Input Port Register */ /**@}*/ /* end of Cryptographic Accelerator register group */ /*---------------------- Universal Asynchronous Receiver/Transmitter Controller -------------------------*/ /** @addtogroup UART Universal Asynchronous Receiver/Transmitter Controller(UART) Memory Mapped Structure for UART Controller @{ */ #define REG_UART0_RBR (UART0_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART0_THR (UART0_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART0_IER (UART0_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART0_FCR (UART0_BA+0x08) /*!< FIFO Control Register */ #define REG_UART0_LCR (UART0_BA+0x0C) /*!< Line Control Register */ #define REG_UART0_MCR (UART0_BA+0x10) /*!< Modem Control Register */ #define REG_UART0_MSR (UART0_BA+0x14) /*!< MODEM Status Register */ #define REG_UART0_FSR (UART0_BA+0x18) /*!< FIFO Status Register */ #define REG_UART0_ISR (UART0_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART0_TOR (UART0_BA+0x20) /*!< Time-out Register */ #define REG_UART0_BAUD (UART0_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART0_IRCR (UART0_BA+0x28) /*!< IrDA Control Register */ #define REG_UART0_ALT_CSR (UART0_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART0_FUN_SEL (UART0_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART0_LIN_CTL (UART0_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART0_LIN_SR (UART0_BA+0x38) /*!< LIN Status Register */ /* UART1 Control Registers */ #define REG_UART1_RBR (UART1_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART1_THR (UART1_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART1_IER (UART1_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART1_FCR (UART1_BA+0x08) /*!< FIFO Control Register */ #define REG_UART1_LCR (UART1_BA+0x0C) /*!< Line Control Register */ #define REG_UART1_MCR (UART1_BA+0x10) /*!< Modem Control Register */ #define REG_UART1_MSR (UART1_BA+0x14) /*!< MODEM Status Register */ #define REG_UART1_FSR (UART1_BA+0x18) /*!< FIFO Status Register */ #define REG_UART1_ISR (UART1_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART1_TOR (UART1_BA+0x20) /*!< Time-out Register */ #define REG_UART1_BAUD (UART1_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART1_IRCR (UART1_BA+0x28) /*!< IrDA Control Register */ #define REG_UART1_ALT_CSR (UART1_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART1_FUN_SEL (UART1_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART1_LIN_CTL (UART1_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART1_LIN_SR (UART1_BA+0x38) /*!< LIN Status Register */ /* UART2 Control Registers */ #define REG_UART2_RBR (UART2_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART2_THR (UART2_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART2_IER (UART2_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART2_FCR (UART2_BA+0x08) /*!< FIFO Control Register */ #define REG_UART2_LCR (UART2_BA+0x0C) /*!< Line Control Register */ #define REG_UART2_MCR (UART2_BA+0x10) /*!< Modem Control Register */ #define REG_UART2_MSR (UART2_BA+0x14) /*!< MODEM Status Register */ #define REG_UART2_FSR (UART2_BA+0x18) /*!< FIFO Status Register */ #define REG_UART2_ISR (UART2_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART2_TOR (UART2_BA+0x20) /*!< Time-out Register */ #define REG_UART2_BAUD (UART2_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART2_IRCR (UART2_BA+0x28) /*!< IrDA Control Register */ #define REG_UART2_ALT_CSR (UART2_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART2_FUN_SEL (UART2_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART2_LIN_CTL (UART2_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART2_LIN_SR (UART2_BA+0x38) /*!< LIN Status Register */ /* UART3 Control Registers */ #define REG_UART3_RBR (UART3_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART3_THR (UART3_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART3_IER (UART3_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART3_FCR (UART3_BA+0x08) /*!< FIFO Control Register */ #define REG_UART3_LCR (UART3_BA+0x0C) /*!< Line Control Register */ #define REG_UART3_MCR (UART3_BA+0x10) /*!< Modem Control Register */ #define REG_UART3_MSR (UART3_BA+0x14) /*!< MODEM Status Register */ #define REG_UART3_FSR (UART3_BA+0x18) /*!< FIFO Status Register */ #define REG_UART3_ISR (UART3_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART3_TOR (UART3_BA+0x20) /*!< Time-out Register */ #define REG_UART3_BAUD (UART3_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART3_IRCR (UART3_BA+0x28) /*!< IrDA Control Register */ #define REG_UART3_ALT_CSR (UART3_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART3_FUN_SEL (UART3_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART3_LIN_CTL (UART3_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART3_LIN_SR (UART3_BA+0x38) /*!< LIN Status Register */ /* UART4 Control Registers */ #define REG_UART4_RBR (UART4_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART4_THR (UART4_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART4_IER (UART4_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART4_FCR (UART4_BA+0x08) /*!< FIFO Control Register */ #define REG_UART4_LCR (UART4_BA+0x0C) /*!< Line Control Register */ #define REG_UART4_MCR (UART4_BA+0x10) /*!< Modem Control Register */ #define REG_UART4_MSR (UART4_BA+0x14) /*!< MODEM Status Register */ #define REG_UART4_FSR (UART4_BA+0x18) /*!< FIFO Status Register */ #define REG_UART4_ISR (UART4_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART4_TOR (UART4_BA+0x20) /*!< Time-out Register */ #define REG_UART4_BAUD (UART4_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART4_IRCR (UART4_BA+0x28) /*!< IrDA Control Register */ #define REG_UART4_ALT_CSR (UART4_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART4_FUN_SEL (UART4_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART4_LIN_CTL (UART4_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART4_LIN_SR (UART4_BA+0x38) /*!< LIN Status Register */ /* UART5 Control Registers */ #define REG_UART5_RBR (UART5_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART5_THR (UART5_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART5_IER (UART5_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART5_FCR (UART5_BA+0x08) /*!< FIFO Control Register */ #define REG_UART5_LCR (UART5_BA+0x0C) /*!< Line Control Register */ #define REG_UART5_MCR (UART5_BA+0x10) /*!< Modem Control Register */ #define REG_UART5_MSR (UART5_BA+0x14) /*!< MODEM Status Register */ #define REG_UART5_FSR (UART5_BA+0x18) /*!< FIFO Status Register */ #define REG_UART5_ISR (UART5_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART5_TOR (UART5_BA+0x20) /*!< Time-out Register */ #define REG_UART5_BAUD (UART5_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART5_IRCR (UART5_BA+0x28) /*!< IrDA Control Register */ #define REG_UART5_ALT_CSR (UART5_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART5_FUN_SEL (UART5_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART5_LIN_CTL (UART5_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART5_LIN_SR (UART5_BA+0x38) /*!< LIN Status Register */ /* UART6 Control Registers */ #define REG_UART6_RBR (UART6_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART6_THR (UART6_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART6_IER (UART6_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART6_FCR (UART6_BA+0x08) /*!< FIFO Control Register */ #define REG_UART6_LCR (UART6_BA+0x0C) /*!< Line Control Register */ #define REG_UART6_MCR (UART6_BA+0x10) /*!< Modem Control Register */ #define REG_UART6_MSR (UART6_BA+0x14) /*!< MODEM Status Register */ #define REG_UART6_FSR (UART6_BA+0x18) /*!< FIFO Status Register */ #define REG_UART6_ISR (UART6_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART6_TOR (UART6_BA+0x20) /*!< Time-out Register */ #define REG_UART6_BAUD (UART6_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART6_IRCR (UART6_BA+0x28) /*!< IrDA Control Register */ #define REG_UART6_ALT_CSR (UART6_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART6_FUN_SEL (UART6_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART6_LIN_CTL (UART6_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART6_LIN_SR (UART6_BA+0x38) /*!< LIN Status Register */ /* UART7 Control Registers */ #define REG_UART7_RBR (UART7_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART7_THR (UART7_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART7_IER (UART7_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART7_FCR (UART7_BA+0x08) /*!< FIFO Control Register */ #define REG_UART7_LCR (UART7_BA+0x0C) /*!< Line Control Register */ #define REG_UART7_MCR (UART7_BA+0x10) /*!< Modem Control Register */ #define REG_UART7_MSR (UART7_BA+0x14) /*!< MODEM Status Register */ #define REG_UART7_FSR (UART7_BA+0x18) /*!< FIFO Status Register */ #define REG_UART7_ISR (UART7_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART7_TOR (UART7_BA+0x20) /*!< Time-out Register */ #define REG_UART7_BAUD (UART7_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART7_IRCR (UART7_BA+0x28) /*!< IrDA Control Register */ #define REG_UART7_ALT_CSR (UART7_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART7_FUN_SEL (UART7_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART7_LIN_CTL (UART7_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART7_LIN_SR (UART7_BA+0x38) /*!< LIN Status Register */ /* UART8 Control Registers */ #define REG_UART8_RBR (UART8_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART8_THR (UART8_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART8_IER (UART8_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART8_FCR (UART8_BA+0x08) /*!< FIFO Control Register */ #define REG_UART8_LCR (UART8_BA+0x0C) /*!< Line Control Register */ #define REG_UART8_MCR (UART8_BA+0x10) /*!< Modem Control Register */ #define REG_UART8_MSR (UART8_BA+0x14) /*!< MODEM Status Register */ #define REG_UART8_FSR (UART8_BA+0x18) /*!< FIFO Status Register */ #define REG_UART8_ISR (UART8_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART8_TOR (UART8_BA+0x20) /*!< Time-out Register */ #define REG_UART8_BAUD (UART8_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART8_IRCR (UART8_BA+0x28) /*!< IrDA Control Register */ #define REG_UART8_ALT_CSR (UART8_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART8_FUN_SEL (UART8_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART8_LIN_CTL (UART8_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART8_LIN_SR (UART8_BA+0x38) /*!< LIN Status Register */ /* UART9 Control Registers */ #define REG_UART9_RBR (UART9_BA+0x00) /*!< Receive Buffer Register */ #define REG_UART9_THR (UART9_BA+0x00) /*!< Transmit Holding Register */ #define REG_UART9_IER (UART9_BA+0x04) /*!< Interrupt Enable Register */ #define REG_UART9_FCR (UART9_BA+0x08) /*!< FIFO Control Register */ #define REG_UART9_LCR (UART9_BA+0x0C) /*!< Line Control Register */ #define REG_UART9_MCR (UART9_BA+0x10) /*!< Modem Control Register */ #define REG_UART9_MSR (UART9_BA+0x14) /*!< MODEM Status Register */ #define REG_UART9_FSR (UART9_BA+0x18) /*!< FIFO Status Register */ #define REG_UART9_ISR (UART9_BA+0x1C) /*!< Interrupt Status Control Register */ #define REG_UART9_TOR (UART9_BA+0x20) /*!< Time-out Register */ #define REG_UART9_BAUD (UART9_BA+0x24) /*!< Baud Rate Divider Register */ #define REG_UART9_IRCR (UART9_BA+0x28) /*!< IrDA Control Register */ #define REG_UART9_ALT_CSR (UART9_BA+0x2C) /*!< Alternate Control Register */ #define REG_UART9_FUN_SEL (UART9_BA+0x30) /*!< UART Function Select REgister */ #define REG_UART9_LIN_CTL (UART9_BA+0x34) /*!< UART LIN Control Register */ #define REG_UART9_LIN_SR (UART9_BA+0x38) /*!< LIN Status Register */ /**@}*/ /* end of UART register group */ /*---------------------- Enhance Timer Controller -------------------------*/ /** @addtogroup ETIMER Enhance Timer Controller(ETIMER) Memory Mapped Structure for TIMER Controller @{ */ #define REG_ETMR0_CTL (ETMR0_BA+0x00) /*!< Enhance Timer 0 Control Register */ #define REG_ETMR0_PRECNT (ETMR0_BA+0x04) /*!< Enhance Timer 0 Pre-Scale Counter Register */ #define REG_ETMR0_CMPR (ETMR0_BA+0x08) /*!< Enhance Timer 0 Compare Register */ #define REG_ETMR0_IER (ETMR0_BA+0x0C) /*!< Enhance Timer 0 Interrupt Enable Register */ #define REG_ETMR0_ISR (ETMR0_BA+0x10) /*!< Enhance Timer 0 Interrupt Status Register */ #define REG_ETMR0_DR (ETMR0_BA+0x14) /*!< Enhance Timer 0 Data Register */ #define REG_ETMR0_TCAP (ETMR0_BA+0x18) /*!< Enhance Timer 0 Capture Data Register */ #define REG_ETMR0_ECTL (ETMR0_BA+0x20) /*!< Enhance Timer 0 Extended Control Register */ #define REG_ETMR1_CTL (ETMR1_BA+0x00) /*!< Enhance Timer 1 Control Register */ #define REG_ETMR1_PRECNT (ETMR1_BA+0x04) /*!< Enhance Timer 1 Pre-Scale Counter Register */ #define REG_ETMR1_CMPR (ETMR1_BA+0x08) /*!< Enhance Timer 1 Compare Register */ #define REG_ETMR1_IER (ETMR1_BA+0x0C) /*!< Enhance Timer 1 Interrupt Enable Register */ #define REG_ETMR1_ISR (ETMR1_BA+0x10) /*!< Enhance Timer 1 Interrupt Status Register */ #define REG_ETMR1_DR (ETMR1_BA+0x14) /*!< Enhance Timer 1 Data Register */ #define REG_ETMR1_TCAP (ETMR1_BA+0x18) /*!< Enhance Timer 1 Capture Data Register */ #define REG_ETMR1_ECTL (ETMR1_BA+0x20) /*!< Enhance Timer 1 Extended Control Register */ #define REG_ETMR2_CTL (ETMR2_BA+0x00) /*!< Enhance Timer 2 Control Register */ #define REG_ETMR2_PRECNT (ETMR2_BA+0x04) /*!< Enhance Timer 2 Pre-Scale Counter Register */ #define REG_ETMR2_CMPR (ETMR2_BA+0x08) /*!< Enhance Timer 2 Compare Register */ #define REG_ETMR2_IER (ETMR2_BA+0x0C) /*!< Enhance Timer 2 Interrupt Enable Register */ #define REG_ETMR2_ISR (ETMR2_BA+0x10) /*!< Enhance Timer 2 Interrupt Status Register */ #define REG_ETMR2_DR (ETMR2_BA+0x14) /*!< Enhance Timer 2 Data Register */ #define REG_ETMR2_TCAP (ETMR2_BA+0x18) /*!< Enhance Timer 2 Capture Data Register */ #define REG_ETMR2_ECTL (ETMR2_BA+0x20) /*!< Enhance Timer 2 Extended Control Register */ #define REG_ETMR3_CTL (ETMR3_BA+0x00) /*!< Enhance Timer 3 Control Register */ #define REG_ETMR3_PRECNT (ETMR3_BA+0x04) /*!< Enhance Timer 3 Pre-Scale Counter Register */ #define REG_ETMR3_CMPR (ETMR3_BA+0x08) /*!< Enhance Timer 3 Compare Register */ #define REG_ETMR3_IER (ETMR3_BA+0x0C) /*!< Enhance Timer 3 Interrupt Enable Register */ #define REG_ETMR3_ISR (ETMR3_BA+0x10) /*!< Enhance Timer 3 Interrupt Status Register */ #define REG_ETMR3_DR (ETMR3_BA+0x14) /*!< Enhance Timer 3 Data Register */ #define REG_ETMR3_TCAP (ETMR3_BA+0x18) /*!< Enhance Timer 3 Capture Data Register */ #define REG_ETMR3_ECTL (ETMR3_BA+0x20) /*!< Enhance Timer 3 Extended Control Register */ #define REG_ETMR4_CTL (ETMR4_BA+0x00) /*!< Enhance Timer 4 Control Register */ #define REG_ETMR4_PRECNT (ETMR4_BA+0x04) /*!< Enhance Timer 4 Pre-Scale Counter Register */ #define REG_ETMR4_CMPR (ETMR4_BA+0x08) /*!< Enhance Timer 4 Compare Register */ #define REG_ETMR4_IER (ETMR4_BA+0x0C) /*!< Enhance Timer 4 Interrupt Enable Register */ #define REG_ETMR4_ISR (ETMR4_BA+0x10) /*!< Enhance Timer 4 Interrupt Status Register */ #define REG_ETMR4_DR (ETMR4_BA+0x14) /*!< Enhance Timer 4 Data Register */ #define REG_ETMR4_TCAP (ETMR4_BA+0x18) /*!< Enhance Timer 4 Capture Data Register */ #define REG_ETMR4_ECTL (ETMR4_BA+0x20) /*!< Enhance Timer 4 Extended Control Register */ #define REG_ETMR5_CTL (ETMR5_BA+0x00) /*!< Enhance Timer 5 Control Register */ #define REG_ETMR5_PRECNT (ETMR5_BA+0x04) /*!< Enhance Timer 5 Pre-Scale Counter Register */ #define REG_ETMR5_CMPR (ETMR5_BA+0x08) /*!< Enhance Timer 5 Compare Register */ #define REG_ETMR5_IER (ETMR5_BA+0x0C) /*!< Enhance Timer 5 Interrupt Enable Register */ #define REG_ETMR5_ISR (ETMR5_BA+0x10) /*!< Enhance Timer 5 Interrupt Status Register */ #define REG_ETMR5_DR (ETMR5_BA+0x14) /*!< Enhance Timer 5 Data Register */ #define REG_ETMR5_TCAP (ETMR5_BA+0x18) /*!< Enhance Timer 5 Capture Data Register */ #define REG_ETMR5_ECTL (ETMR5_BA+0x20) /*!< Enhance Timer 5 Extended Control Register */ /**@}*/ /* end of ETIMER register group */ /*---------------------- WDT Controller -------------------------*/ /** @addtogroup WDT Watch Dog Timer Controller(WDT) Memory Mapped Structure for WDT Controller @{ */ #define REG_WDT_CTL (WDT_BA+0x00) /*!< WDT Control Register */ #define REG_WDT_ALTCTL (WDT_BA+0x04) /*!< WDT Alternative Control Register */ #define REG_WDT_RSTCNT (WDT_BA+0x08) /*!< WDT Reset Counter Register */ /**@}*/ /* end of WDT register group */ /*---------------------- WWDT Controller -------------------------*/ /** @addtogroup WWDT Window Watch Dog Timer Controller(WWDT) Memory Mapped Structure for WWDT Controller @{ */ #define REG_WWDT_RLDCNT (WWDT_BA+0x00) /*!< WWDT Reload Counter Register */ #define REG_WWDT_CTL (WWDT_BA+0x04) /*!< WWDT Control Register */ #define REG_WWDT_STATUS (WWDT_BA+0x08) /*!< WWDT Status Register */ #define REG_WWDT_CNT (WWDT_BA+0x0C) /*!< WWDT Counter Value Register */ /**@}*/ /* end of WWDT register group */ /*---------------------- SC Host Interface -------------------------*/ /** @addtogroup SC Smart Card Host Interface (SC) Memory Mapped Structure for Smart Card Host Interface @{ */ #define REG_SC0_DAT (SC0_BA+0x00) /*!< SC0 Receiving/Transmit Holding Buffer Register */ #define REG_SC0_CTL (SC0_BA+0x04) /*!< SC0 Control Register */ #define REG_SC0_ALTCTL (SC0_BA+0x08) /*!< SC0 Alternate Control Register */ #define REG_SC0_EGT (SC0_BA+0x0C) /*!< SC0 Extend Guard Time Register */ #define REG_SC0_RXTOUT (SC0_BA+0x10) /*!< SC0 Receive Buffer Time-out Register */ #define REG_SC0_ETUCTL (SC0_BA+0x14) /*!< SC0 ETU Control Register */ #define REG_SC0_INTEN (SC0_BA+0x18) /*!< SC0 Interrupt Enable Control Register */ #define REG_SC0_INTSTS (SC0_BA+0x1C) /*!< SC0 Interrupt Status Register */ #define REG_SC0_STATUS (SC0_BA+0x20) /*!< SC0 Status Register */ #define REG_SC0_PINCTL (SC0_BA+0x24) /*!< SC0 Pin Control State Register */ #define REG_SC0_TMRCTL0 (SC0_BA+0x28) /*!< SC0 Internal Timer Control Register 0 */ #define REG_SC0_TMRCTL1 (SC0_BA+0x2C) /*!< SC0 Internal Timer Control Register 1 */ #define REG_SC0_TMRCTL2 (SC0_BA+0x30) /*!< SC0 Internal Timer Control Register 2 */ #define REG_SC0_UARTCTL (SC0_BA+0x34) /*!< SC0 UART Mode Control Register */ #define REG_SC0_ACTCTL (SC0_BA+0x4C) /*!< SC0 Activation Control Register */ #define REG_SC1_DAT (SC1_BA+0x00) /*!< SC1 Receiving/Transmit Holding Buffer Register */ #define REG_SC1_CTL (SC1_BA+0x04) /*!< SC1 Control Register */ #define REG_SC1_ALTCTL (SC1_BA+0x08) /*!< SC1 Alternate Control Register */ #define REG_SC1_EGT (SC1_BA+0x0C) /*!< SC1 Extend Guard Time Register */ #define REG_SC1_RXTOUT (SC1_BA+0x10) /*!< SC1 Receive Buffer Time-out Register */ #define REG_SC1_ETUCTL (SC1_BA+0x14) /*!< SC1 ETU Control Register */ #define REG_SC1_INTEN (SC1_BA+0x18) /*!< SC1 Interrupt Enable Control Register */ #define REG_SC1_INTSTS (SC1_BA+0x1C) /*!< SC1 Interrupt Status Register */ #define REG_SC1_STATUS (SC1_BA+0x20) /*!< SC1 Status Register */ #define REG_SC1_PINCTL (SC1_BA+0x24) /*!< SC1 Pin Control State Register */ #define REG_SC1_TMRCTL0 (SC1_BA+0x28) /*!< SC1 Internal Timer Control Register 0 */ #define REG_SC1_TMRCTL1 (SC1_BA+0x2C) /*!< SC1 Internal Timer Control Register 1 */ #define REG_SC1_TMRCTL2 (SC1_BA+0x30) /*!< SC1 Internal Timer Control Register 2 */ #define REG_SC1_UARTCTL (SC1_BA+0x34) /*!< SC1 UART Mode Control Register */ #define REG_SC1_ACTCTL (SC1_BA+0x4C) /*!< SC1 Activation Control Register 1 */ /**@}*/ /* end of SC register group */ /*---------------------- Advance Interrupt Controller -------------------------*/ /** @addtogroup AIC Advance Interrupt Controller(AIC) Memory Mapped Structure for AIC Controller @{ */ #define REG_AIC_SRCCTL0 (AIC_BA+0x00) /* Source control register 0 */ #define REG_AIC_SRCCTL1 (AIC_BA+0x04) /* Source control register 1 */ #define REG_AIC_SRCCTL2 (AIC_BA+0x08) /* Source control register 2 */ #define REG_AIC_SRCCTL3 (AIC_BA+0x0C) /* Source control register 3 */ #define REG_AIC_SRCCTL4 (AIC_BA+0x10) /* Source control register 4 */ #define REG_AIC_SRCCTL5 (AIC_BA+0x14) /* Source control register 5 */ #define REG_AIC_SRCCTL6 (AIC_BA+0x18) /* Source control register 6 */ #define REG_AIC_SRCCTL7 (AIC_BA+0x1C) /* Source control register 7 */ #define REG_AIC_SRCCTL8 (AIC_BA+0x20) /* Source control register 8 */ #define REG_AIC_SRCCTL9 (AIC_BA+0x24) /* Source control register 9 */ #define REG_AIC_SRCCTL10 (AIC_BA+0x28) /* Source control register 10 */ #define REG_AIC_SRCCTL11 (AIC_BA+0x2C) /* Source control register 11 */ #define REG_AIC_SRCCTL12 (AIC_BA+0x30) /* Source control register 12 */ #define REG_AIC_SRCCTL13 (AIC_BA+0x34) /* Source control register 13 */ #define REG_AIC_SRCCTL14 (AIC_BA+0x38) /* Source control register 14 */ #define REG_AIC_SRCCTL15 (AIC_BA+0x3C) /* Source control register 15 */ #define REG_AIC_RAWSTS0 (AIC_BA+0x100) /* Interrupt raw status register */ #define REG_AIC_RAWSTS1 (AIC_BA+0x104) /* Interrupt raw status register (Hign) */ #define REG_AIC_ACTSTS0 (AIC_BA+0x108) /* Interrupt active status register */ #define REG_AIC_ACTSTS1 (AIC_BA+0x10C) /* Interrupt active status register (Hign) */ #define REG_AIC_INTSTS0 (AIC_BA+0x110) /* Interrupt status register */ #define REG_AIC_INTSTS1 (AIC_BA+0x114) /* Interrupt status register (High) */ #define REG_AIC_IRQNUM (AIC_BA+0x120) /* Interrupt source number register */ #define REG_AIC_FIQNUM (AIC_BA+0x124) /* Output interrupt status register */ #define REG_AIC_INTMSK0 (AIC_BA+0x128) /* Interrupt mask register */ #define REG_AIC_INTMSK1 (AIC_BA+0x12C) /* Interrupt mask register (High) */ #define REG_AIC_INTEN0 (AIC_BA+0x130) /* Mask enable command register */ #define REG_AIC_INTEN1 (AIC_BA+0x134) /* Mask enable command register (High) */ #define REG_AIC_INTDIS0 (AIC_BA+0x138) /* Mask disable command register */ #define REG_AIC_INTDIS1 (AIC_BA+0x13C) /* Mask disable command register (High) */ #define REG_AIC_EOIS (AIC_BA+0x150) /* End of service command register */ #define REG_AIC_EOFS (AIC_BA+0x154) /* End of service command register */ /**@}*/ /* end of AIC register group */ /*---------------------- Real Time Clock Controller -------------------------*/ /** @addtogroup RTC Real Time Clock Controller(RTC) Memory Mapped Structure for RTC Controller @{ */ #define REG_RTC_INIT (RTC_BA+0x00) /*!< RTC Initiation Register */ #define REG_RTC_RWEN (RTC_BA+0x04) /*!< RTC Access Enable Register */ #define REG_RTC_FREQADJ (RTC_BA+0x08) /*!< RTC Frequency Compensation Register */ #define REG_RTC_TIME (RTC_BA+0x0C) /*!< Time Loading Register */ #define REG_RTC_CAL (RTC_BA+0x10) /*!< Calendar Loading Register */ #define REG_RTC_TIMEFMT (RTC_BA+0x14) /*!< Time Format Selection Register */ #define REG_RTC_WEEKDAY (RTC_BA+0x18) /*!< Day of the Week Register */ #define REG_RTC_TALM (RTC_BA+0x1C) /*!< Time Alarm Register */ #define REG_RTC_CALM (RTC_BA+0x20) /*!< Calendar Alarm Register */ #define REG_RTC_LEAPYEAR (RTC_BA+0x24) /*!< Leap year Indicator Register */ #define REG_RTC_INTEN (RTC_BA+0x28) /*!< RTC Interrupt Enable Register */ #define REG_RTC_INTSTS (RTC_BA+0x2C) /*!< RTC Interrupt Indicator Register */ #define REG_RTC_TICK (RTC_BA+0x30) /*!< RTC Time Tick Register */ #define REG_RTC_PWRCTL (RTC_BA+0x34) /*!< Power Control Register */ #define REG_RTC_PWRCNT (RTC_BA+0x38) /*!< Power Control Counter Register */ #define REG_RTC_SPR0 (RTC_BA+0x40) /*!< Spare REgistger 0 */ #define REG_RTC_SPR1 (RTC_BA+0x44) /*!< Spare REgistger 1 */ #define REG_RTC_SPR2 (RTC_BA+0x48) /*!< Spare REgistger 2 */ #define REG_RTC_SPR3 (RTC_BA+0x4C) /*!< Spare REgistger 3 */ #define REG_RTC_SPR4 (RTC_BA+0x50) /*!< Spare REgistger 4 */ #define REG_RTC_SPR5 (RTC_BA+0x54) /*!< Spare REgistger 5 */ #define REG_RTC_SPR6 (RTC_BA+0x58) /*!< Spare REgistger 6 */ #define REG_RTC_SPR7 (RTC_BA+0x5C) /*!< Spare REgistger 7 */ #define REG_RTC_SPR8 (RTC_BA+0x60) /*!< Spare REgistger 8 */ #define REG_RTC_SPR9 (RTC_BA+0x64) /*!< Spare REgistger 9 */ #define REG_RTC_SPR10 (RTC_BA+0x68) /*!< Spare REgistger 10 */ #define REG_RTC_SPR11 (RTC_BA+0x6C) /*!< Spare REgistger 11 */ #define REG_RTC_SPR12 (RTC_BA+0x70) /*!< Spare REgistger 12 */ #define REG_RTC_SPR13 (RTC_BA+0x74) /*!< Spare REgistger 13 */ #define REG_RTC_SPR14 (RTC_BA+0x78) /*!< Spare REgistger 14 */ #define REG_RTC_SPR15 (RTC_BA+0x7C) /*!< Spare REgistger 15 */ /**@}*/ /* end of RTC register group */ /*---------------------- Pulse Width Modulation Controller -------------------------*/ /** @addtogroup PWM Pulse Width Modulation Controller(PWM) Memory Mapped Structure for PWM Controller @{ */ #define REG_PWM0_PPR (PWM0_BA+0x00) /*!< PWM Pre-scale Register 0 */ #define REG_PWM0_CSR (PWM0_BA+0x04) /*!< PWM Clock Select Register */ #define REG_PWM0_PCR (PWM0_BA+0x08) /*!< PWM Control Register */ #define REG_PWM0_CNR0 (PWM0_BA+0x0C) /*!< PWM Counter Register 0 */ #define REG_PWM0_CMR0 (PWM0_BA+0x10) /*!< PWM Comparator Register 0 */ #define REG_PWM0_PDR0 (PWM0_BA+0x14) /*!< PWM Data Register 0 */ #define REG_PWM0_CNR1 (PWM0_BA+0x18) /*!< PWM Counter Register 1 */ #define REG_PWM0_CMR1 (PWM0_BA+0x1C) /*!< PWM Comparator Register 1 */ #define REG_PWM0_PDR1 (PWM0_BA+0x20) /*!< PWM Data Register 1 */ #define REG_PWM0_CNR2 (PWM0_BA+0x24) /*!< PWM Counter Register 2 */ #define REG_PWM0_CMR2 (PWM0_BA+0x28) /*!< PWM Comparator Register 2 */ #define REG_PWM0_PDR2 (PWM0_BA+0x2C) /*!< PWM Data Register 2 */ #define REG_PWM0_CNR3 (PWM0_BA+0x30) /*!< PWM Counter Register 3 */ #define REG_PWM0_CMR3 (PWM0_BA+0x34) /*!< PWM Comparator Register 3 */ #define REG_PWM0_PDR3 (PWM0_BA+0x38) /*!< PWM Data Register 3 */ #define REG_PWM0_PIER (PWM0_BA+0x3C) /*!< PWM Timer Interrupt Enable Register */ #define REG_PWM0_PIIR (PWM0_BA+0x40) /*!< PWM Timer Interrupt Identification Register */ #define REG_PWM1_PPR (PWM1_BA+0x00) /*!< PWM Pre-scale Register 0 */ #define REG_PWM1_CSR (PWM1_BA+0x04) /*!< PWM Clock Select Register */ #define REG_PWM1_PCR (PWM1_BA+0x08) /*!< PWM Control Register */ #define REG_PWM1_CNR0 (PWM1_BA+0x0C) /*!< PWM Counter Register 0 */ #define REG_PWM1_CMR0 (PWM1_BA+0x10) /*!< PWM Comparator Register 0 */ #define REG_PWM1_PDR0 (PWM1_BA+0x14) /*!< PWM Data Register 0 */ #define REG_PWM1_CNR1 (PWM1_BA+0x18) /*!< PWM Counter Register 1 */ #define REG_PWM1_CMR1 (PWM1_BA+0x1C) /*!< PWM Comparator Register 1 */ #define REG_PWM1_PDR1 (PWM1_BA+0x20) /*!< PWM Data Register 1 */ #define REG_PWM1_CNR2 (PWM1_BA+0x24) /*!< PWM Counter Register 2 */ #define REG_PWM1_CMR2 (PWM1_BA+0x28) /*!< PWM Comparator Register 2 */ #define REG_PWM1_PDR2 (PWM1_BA+0x2C) /*!< PWM Data Register 2 */ #define REG_PWM1_CNR3 (PWM1_BA+0x30) /*!< PWM Counter Register 3 */ #define REG_PWM1_CMR3 (PWM1_BA+0x34) /*!< PWM Comparator Register 3 */ #define REG_PWM1_PDR3 (PWM1_BA+0x38) /*!< PWM Data Register 3 */ #define REG_PWM1_PIER (PWM1_BA+0x3C) /*!< PWM Timer Interrupt Enable Register */ #define REG_PWM1_PIIR (PWM1_BA+0x40) /*!< PWM Timer Interrupt Identification Register */ /**@}*/ /* end of PWM register group */ /*------------------ Capture Sensor Interface Controller ---------------------*/ /** @addtogroup CAP Capture Engine(CAP) Memory Mapped Structure for CAP Controller @{ */ #define REG_CAP0_CTL (CAP0_BA+0x000) /*!< Image Capture Interface Control Register */ #define REG_CAP0_PAR (CAP0_BA+0x004) /*!< Image Capture Interface Parameter Register */ #define REG_CAP0_INT (CAP0_BA+0x008) /*!< Image Capture Interface Interrupt Registe */ #define REG_CAP0_POSTERIZE (CAP0_BA+0x00C) /*!< YUV Component Posterizing Factor Register */ #define REG_CAP0_MD (CAP0_BA+0x010) /*!< Motion Detection Register */ #define REG_CAP0_MDADDR (CAP0_BA+0x014) /*!< Motion Detection Output Address Register */ #define REG_CAP0_MDYADDR (CAP0_BA+0x018) /*!< Motion Detection Temp YOutput Address Register */ #define REG_CAP0_SEPIA (CAP0_BA+0x01C) /*!< Sepia Effect Control Register */ #define REG_CAP0_CWSP (CAP0_BA+0x020) /*!< Cropping Window Starting Address Register */ #define REG_CAP0_CWS (CAP0_BA+0x024) /*!< Cropping Window Size Register */ #define REG_CAP0_PKTSL (CAP0_BA+0x028) /*!< Packet Scaling Vertical/Horizontal Factor Register (LSB) */ #define REG_CAP0_PLNSL (CAP0_BA+0x02C) /*!< Planar Scaling Vertical/Horizontal Factor Register (LSB) */ #define REG_CAP0_FRCTL (CAP0_BA+0x030) /*!< Scaling Frame Rate Factor Register */ #define REG_CAP0_STRIDE (CAP0_BA+0x034) /*!< Frame Output Pixel Stride Register */ #define REG_CAP0_FIFOTH (CAP0_BA+0x03C) /*!< FIFO threshold Register */ #define REG_CAP0_CMPADDR (CAP0_BA+0x040) /*!< Compare Packet Memory Base Address Register */ #define REG_CAP0_PKTSM (CAP0_BA+0x048) /*!< Packet Scaling Vertical/Horizontal Factor Register (MSB) */ #define REG_CAP0_PLNSM (CAP0_BA+0x04C) /*!< Planar Scaling Vertical/Horizontal Factor Register (MSB) */ #define REG_CAP0_CURADDRP (CAP0_BA+0x050) /*!< Current Packet System Memory Address Register */ #define REG_CAP0_CURADDRY (CAP0_BA+0x054) /*!< Current Planar Y System Memory Address Register */ #define REG_CAP0_CURADDRU (CAP0_BA+0x058) /*!< Current Planar U System Memory Address Register */ #define REG_CAP0_CURADDRV (CAP0_BA+0x05C) /*!< Current Planar V System Memory Address Register */ #define REG_CAP0_PKTBA0 (CAP0_BA+0x060) /*!< System Memory Packet Base Address Register */ #define REG_CAP0_PKTBA1 (CAP0_BA+0x064) /*!< System Memory Packet Base Address Register */ #define REG_CAP0_YBA (CAP0_BA+0x080) /*!< System Memory Planar Y Base Address Register */ #define REG_CAP0_UBA (CAP0_BA+0x084) /*!< System Memory Planar U Base Address Register */ #define REG_CAP0_VBA (CAP0_BA+0x088) /*!< System Memory Planar V Base Address Register */ /**@}*/ /* end of CAP register group */ /*------------------ SDRAM Interface Controller ---------------------*/ /** @addtogroup SDIC SDRAM Interface Controller(SDIC) Memory Mapped Structure for SDIC Controller @{ */ #define REG_SDIC_OPMCTL (SDIC_BA+0x000) /*!< SDRAM Controller Operation Mode Control Register */ #define REG_SDIC_CMD (SDIC_BA+0x004) /*!< SDRAM Command Register */ #define REG_SDIC_REFCTL (SDIC_BA+0x008) /*!< SDRAM Controller Refresh Control Register */ #define REG_SDIC_SIZE0 (SDIC_BA+0x010) /*!< SDRAM 0 Size Register */ #define REG_SDIC_SIZE1 (SDIC_BA+0x014) /*!< SDRAM 1 Size Register */ #define REG_SDIC_MR (SDIC_BA+0x018) /*!< SDRAM Mode Register */ #define REG_SDIC_EMR (SDIC_BA+0x01C) /*!< SDRAM Extended Mode Register */ #define REG_SDIC_EMR2 (SDIC_BA+0x020) /*!< SDRAM Extended Mode Register 2 */ #define REG_SDIC_EMR3 (SDIC_BA+0x024) /*!< SDRAM Extended Mode Register 3 */ #define REG_SDIC_TIME (SDIC_BA+0x028) /*!< SDRAM Timing Control Register */ #define REG_SDIC_DQSODS (SDIC_BA+0x030) /*!< DQS Output Delay Selection Register */ #define REG_SDIC_CKDQSDS (SDIC_BA+0x034) /*!< Clock and DQS Delay Selection Register */ #define REG_SDIC_DAENSEL (SDIC_BA+0x038) /*!< Data Latch Enable Selection Register */ /**@}*/ /* end of SDIC register group */ /*---------------------- Controller Area Network -------------------------*/ /** @addtogroup CAN Controller Area Network(CAN) Memory Mapped Structure for CAN Controller @{ */ #define REG_CAN0_CON (CAN0_BA+0x00) /*!< Control Register */ #define REG_CAN0_STATUS (CAN0_BA+0x04) /*!< Status Register */ #define REG_CAN0_ERR (CAN0_BA+0x08) /*!< Error Counter Register */ #define REG_CAN0_BTIME (CAN0_BA+0x0C) /*!< Bit Time Register */ #define REG_CAN0_IIDR (CAN0_BA+0x10) /*!< Interrupt Identifier Register */ #define REG_CAN0_TEST (CAN0_BA+0x14) /*!< Test Register */ #define REG_CAN0_BRPE (CAN0_BA+0x18) /*!< BRP Extension Register */ #define REG_CAN0_IF1_CREQ (CAN0_BA+0x20) /*!< IF1 Command Request Register */ #define REG_CAN0_IF2_CREQ (CAN0_BA+0x80) /*!< IF2 Command Request Register */ #define REG_CAN0_IF1_CMASK (CAN0_BA+0x24) /*!< IF1 Command Mask Register */ #define REG_CAN0_IF2_CMASK (CAN0_BA+0x84) /*!< IF2 Command Mask Register */ #define REG_CAN0_IF1_MASK1 (CAN0_BA+0x28) /*!< IF1 Msak 1 Register */ #define REG_CNA0_IF2_MASK1 (CAN0_BA+0x88) /*!< IF2 Mask 1 Register */ #define REG_CAN0_IF1_MASK2 (CAN0_BA+0x2C) /*!< IF1 Mask 2 Register */ #define REG_CAN0_IF2_MASK2 (CAN0_BA+0x8C) /*!< IF2 Mask 2 REgister */ #define REG_CAN0_IF1_ARB1 (CAN0_BA+0x30) /*!< IF1 Arbitration 1 Register */ #define REG_CAN0_IF2_ARB1 (CAN0_BA+0x90) /*!< IF2 Arbitration 1 Register */ #define REG_CAN0_IF1_ARB2 (CAN0_BA+0x34) /*!< IF1 Arbitration 2 Register */ #define REG_CAN0_IF2_ARB2 (CAN0_BA+0x94) /*!< IF2 Arbitration 2 Register */ #define REG_CAN0_IF1_MCON (CAN0_BA+0x38) /*!< IF1 Message Control Register */ #define REG_CAN0_IF2_MCON (CAN0_BA+0x98) /*!< IF2 Message Control Register */ #define REG_CAN0_IF1_DAT_A1 (CAN0_BA+0x3C) /*!< IF1 Data A1 Register */ #define REG_CAN0_IF1_DAT_A2 (CAN0_BA+0x40) /*!< IF1 Data A2 Register */ #define REG_CAN0_IF1_DAT_B1 (CAN0_BA+0x44) /*!< IF1 Data B1 Register */ #define REG_CAN0_IF1_DAT_B2 (CAN0_BA+0x48) /*!< IF1 Data B2 Register */ #define REG_CAN0_IF2_DAT_A1 (CAN0_BA+0x9C) /*!< IF2 Data A1 Register */ #define REG_CAN0_IF2_DAT_A2 (CAN0_BA+0xA0) /*!< IF2 Data A2 Register */ #define REG_CAN0_IF2_DAT_B1 (CAN0_BA+0xA4) /*!< IF2 Data B1 Register */ #define REG_CAN0_IF2_DAT_B2 (CAN0_BA+0xA8) /*!< IF2 Data B2 Register */ #define REG_CAN0_TXREQ1 (CAN0_BA+0x100) /*!< Transmission Request Register 1 */ #define REG_CAN0_TXREQ2 (CAN0_BA+0x104) /*!< Transmission Request Register 2 */ #define REG_CAN0_NDAT1 (CAN0_BA+0x120) /*!< New Data Register 1 */ #define REG_CAN0_NDAT2 (CAN0_BA+0x124) /*!< New Data Register 2 */ #define REG_CAN0_IPND1 (CAN0_BA+0x140) /*!< Interrupt Pending Register 1 */ #define REG_CAN0_IPND2 (CAN0_BA+0x142) /*!< Interrupt Pending Register 2 */ #define REG_CAN0_MVLD1 (CAN0_BA+0x160) /*!< Message Valid Register 1 */ #define REG_CAN0_MVLD2 (CAN0_BA+0x164) /*!< Message Valid Register 2 */ #define REG_CAN0_WU_EN (CAN0_BA+0x168) /*!< Wake-up Function Enable */ #define REG_CAN0_WU_STATUS (CAN0_BA+0x16C) /*!< Wake-up Function Status */ #define REG_CAN1_CON (CAN1_BA+0x00) /*!< Control Register */ #define REG_CAN1_STATUS (CAN1_BA+0x04) /*!< Status Register */ #define REG_CAN1_ERR (CAN1_BA+0x08) /*!< Error Counter Register */ #define REG_CAN1_BTIME (CAN1_BA+0x0C) /*!< Bit Time Register */ #define REG_CAN1_IIDR (CAN1_BA+0x10) /*!< Interrupt Identifier Register */ #define REG_CAN1_TEST (CAN1_BA+0x14) /*!< Test Register */ #define REG_CAN1_BRPE (CAN1_BA+0x18) /*!< BRP Extension Register */ #define REG_CAN1_IF1_CREQ (CAN1_BA+0x20) /*!< IF1 Command Request Register */ #define REG_CAN1_IF2_CREQ (CAN1_BA+0x80) /*!< IF2 Command Request Register */ #define REG_CAN1_IF1_CMASK (CAN1_BA+0x24) /*!< IF1 Command Mask Register */ #define REG_CAN1_IF2_CMASK (CAN1_BA+0x84) /*!< IF2 Command Mask Register */ #define REG_CAN1_IF1_MASK1 (CAN1_BA+0x28) /*!< IF1 Msak 1 Register */ #define REG_CNA1_IF2_MASK1 (CAN1_BA+0x88) /*!< IF2 Mask 1 Register */ #define REG_CAN1_IF1_MASK2 (CAN1_BA+0x2C) /*!< IF1 Mask 2 Register */ #define REG_CAN1_IF2_MASK2 (CAN1_BA+0x8C) /*!< IF2 Mask 2 REgister */ #define REG_CAN1_IF1_ARB1 (CAN1_BA+0x30) /*!< IF1 Arbitration 1 Register */ #define REG_CAN1_IF2_ARB1 (CAN1_BA+0x90) /*!< IF2 Arbitration 1 Register */ #define REG_CAN1_IF1_ARB2 (CAN1_BA+0x34) /*!< IF1 Arbitration 2 Register */ #define REG_CAN1_IF2_ARB2 (CAN1_BA+0x94) /*!< IF2 Arbitration 2 Register */ #define REG_CAN1_IF1_MCON (CAN1_BA+0x38) /*!< IF1 Message Control Register */ #define REG_CAN1_IF2_MCON (CAN1_BA+0x98) /*!< IF2 Message Control Register */ #define REG_CAN1_IF1_DAT_A1 (CAN1_BA+0x3C) /*!< IF1 Data A1 Register */ #define REG_CAN1_IF1_DAT_A2 (CAN1_BA+0x40) /*!< IF1 Data A2 Register */ #define REG_CAN1_IF1_DAT_B1 (CAN1_BA+0x44) /*!< IF1 Data B1 Register */ #define REG_CAN1_IF1_DAT_B2 (CAN1_BA+0x48) /*!< IF1 Data B2 Register */ #define REG_CAN1_IF2_DAT_A1 (CAN1_BA+0x9C) /*!< IF2 Data A1 Register */ #define REG_CAN1_IF2_DAT_A2 (CAN1_BA+0xA0) /*!< IF2 Data A2 Register */ #define REG_CAN1_IF2_DAT_B1 (CAN1_BA+0xA4) /*!< IF2 Data B1 Register */ #define REG_CAN1_IF2_DAT_B2 (CAN1_BA+0xA8) /*!< IF2 Data B2 Register */ #define REG_CAN1_TXREQ1 (CAN1_BA+0x100) /*!< Transmission Request Register 1 */ #define REG_CAN1_TXREQ2 (CAN1_BA+0x104) /*!< Transmission Request Register 2 */ #define REG_CAN1_NDAT1 (CAN1_BA+0x120) /*!< New Data Register 1 */ #define REG_CAN1_NDAT2 (CAN1_BA+0x124) /*!< New Data Register 2 */ #define REG_CAN1_IPND1 (CAN1_BA+0x140) /*!< Interrupt Pending Register 1 */ #define REG_CAN1_IPND2 (CAN1_BA+0x142) /*!< Interrupt Pending Register 2 */ #define REG_CAN1_MVLD1 (CAN1_BA+0x160) /*!< Message Valid Register 1 */ #define REG_CAN1_MVLD2 (CAN1_BA+0x164) /*!< Message Valid Register 2 */ #define REG_CAN1_WU_EN (CAN1_BA+0x168) /*!< Wake-up Function Enable */ #define REG_CAN1_WU_STATUS (CAN1_BA+0x16C) /*!< Wake-up Function Status */ /**@}*/ /* end of CAN register group */ /*@}*/ /* end of group REGISTER */ /** @addtogroup IO_ROUTINE I/O Routines The Declaration of NUC980 I/O Routines @{ */ typedef volatile unsigned char vu8; ///< Define 8-bit unsigned volatile data type typedef volatile unsigned short vu16; ///< Define 16-bit unsigned volatile data type typedef volatile unsigned long vu32; ///< Define 32-bit unsigned volatile data type /** * @brief Get a 8-bit unsigned value from specified address * @param[in] addr Address to get 8-bit data from * @return 8-bit unsigned value stored in specified address */ #define M8(addr) (*((vu8 *) (addr))) /** * @brief Get a 16-bit unsigned value from specified address * @param[in] addr Address to get 16-bit data from * @return 16-bit unsigned value stored in specified address * @note The input address must be 16-bit aligned */ #define M16(addr) (*((vu16 *) (addr))) /** * @brief Get a 32-bit unsigned value from specified address * @param[in] addr Address to get 32-bit data from * @return 32-bit unsigned value stored in specified address * @note The input address must be 32-bit aligned */ #define M32(addr) (*((vu32 *) (addr))) /** * @brief Set a 32-bit unsigned value to specified I/O port * @param[in] port Port address to set 32-bit data * @param[in] value Value to write to I/O port * @return None * @note The output port must be 32-bit aligned */ #define outpw(port,value) *((volatile unsigned int *)(port)) = value /** * @brief Get a 32-bit unsigned value from specified I/O port * @param[in] port Port address to get 32-bit data from * @return 32-bit unsigned value stored in specified I/O port * @note The input port must be 32-bit aligned */ #define inpw(port) (*((volatile unsigned int *)(port))) /** * @brief Set a 16-bit unsigned value to specified I/O port * @param[in] port Port address to set 16-bit data * @param[in] value Value to write to I/O port * @return None * @note The output port must be 16-bit aligned */ #define outps(port,value) *((volatile unsigned short *)(port)) = value /** * @brief Get a 16-bit unsigned value from specified I/O port * @param[in] port Port address to get 16-bit data from * @return 16-bit unsigned value stored in specified I/O port * @note The input port must be 16-bit aligned */ #define inps(port) (*((volatile unsigned short *)(port))) /** * @brief Set a 8-bit unsigned value to specified I/O port * @param[in] port Port address to set 8-bit data * @param[in] value Value to write to I/O port * @return None */ #define outpb(port,value) *((volatile unsigned char *)(port)) = value /** * @brief Get a 8-bit unsigned value from specified I/O port * @param[in] port Port address to get 8-bit data from * @return 8-bit unsigned value stored in specified I/O port */ #define inpb(port) (*((volatile unsigned char *)(port))) /** * @brief Set a 32-bit unsigned value to specified I/O port * @param[in] port Port address to set 32-bit data * @param[in] value Value to write to I/O port * @return None * @note The output port must be 32-bit aligned */ #define outp32(port,value) *((volatile unsigned int *)(port)) = value /** * @brief Get a 32-bit unsigned value from specified I/O port * @param[in] port Port address to get 32-bit data from * @return 32-bit unsigned value stored in specified I/O port * @note The input port must be 32-bit aligned */ #define inp32(port) (*((volatile unsigned int *)(port))) /** * @brief Set a 16-bit unsigned value to specified I/O port * @param[in] port Port address to set 16-bit data * @param[in] value Value to write to I/O port * @return None * @note The output port must be 16-bit aligned */ #define outp16(port,value) *((volatile unsigned short *)(port)) = value /** * @brief Get a 16-bit unsigned value from specified I/O port * @param[in] port Port address to get 16-bit data from * @return 16-bit unsigned value stored in specified I/O port * @note The input port must be 16-bit aligned */ #define inp16(port) (*((volatile unsigned short *)(port))) /** * @brief Set a 8-bit unsigned value to specified I/O port * @param[in] port Port address to set 8-bit data * @param[in] value Value to write to I/O port * @return None */ #define outp8(port,value) *((volatile unsigned char *)(port)) = value /** * @brief Get a 8-bit unsigned value from specified I/O port * @param[in] port Port address to get 8-bit data from * @return 8-bit unsigned value stored in specified I/O port */ #define inp8(port) (*((volatile unsigned char *)(port))) /*@}*/ /* end of group IO_ROUTINE */ /******************************************************************************/ /* Legacy Constants */ /******************************************************************************/ /** @addtogroup Legacy_Constants Legacy Constants NUC980 Legacy Constants @{ */ typedef void *PVOID; ///< Define void pointer data type typedef void VOID; ///< Define void data type typedef char BOOL; ///< Define bool data type typedef char *PBOOL; ///< Define bool pointer data type typedef char INT8; ///< Define 8-bit singed data type typedef char CHAR; ///< Define char data type typedef char *PINT8; ///< Define 8-bit singed pointer data type typedef char *PCHAR; ///< Define char pointer data type typedef unsigned char UINT8; ///< Define 8-bit unsigned data type typedef unsigned char UCHAR; ///< Define char unsigned data type typedef unsigned char *PUINT8; ///< Define 8-bit unsigned pointer data type typedef unsigned char *PUCHAR; ///< Define char unsigned pointer data type typedef char *PSTR; ///< Define string pointer data type typedef const char *PCSTR; ///< Define constant string pointer data type typedef short SHORT; ///< Define short signed data type typedef short *PSHORT; ///< Define short signed pointer data type typedef unsigned short USHORT; ///< Define short unsigned data type typedef unsigned short *PUSHORT; ///< Define short unsigned pointer data type typedef short INT16; ///< Define 16-bit signed data type typedef short *PINT16; ///< Define 16-bit signed pointer data type typedef unsigned short UINT16; ///< Define 16-bit unsigned data type typedef unsigned short *PUINT16; ///< Define 16-bit unsigned pointer data type typedef int INT; ///< Define integer signed data type typedef int *PINT; ///< Define integer signed pointer data type typedef unsigned int UINT; ///< Define integer unsigned data type typedef unsigned int *PUINT; ///< Define integer unsigned pointer data type typedef int INT32; ///< Define 32-bit signed data type typedef int *PINT32; ///< Define 32-bit signed pointer data type typedef unsigned int UINT32; ///< Define 32-bit unsigned data type typedef unsigned int *PUINT32; ///< Define 32-bit unsigned pointer data type #if defined (__GNUC__) && !(__CC_ARM) typedef long long INT64; typedef unsigned long long UINT64; #else typedef __int64 INT64; ///< Define 64-bit signed data type typedef unsigned __int64 UINT64; ///< Define 64-bit unsigned data type #endif typedef float FLOAT; ///< Define float data type typedef float *PFLOAT; ///< Define float pointer data type typedef double DOUBLE; ///< Define double data type typedef double *PDOUBLE; ///< Define double pointer data type typedef int SIZE_T; ///< Define size of data type typedef unsigned char REG8; ///< Define 8-bit register data type typedef unsigned short REG16; ///< Define 16-bit register data type typedef unsigned int REG32; ///< Define 32-bit register data type #ifndef NULL #define NULL (0) ///< NULL pointer #endif #define TRUE (1) ///< Boolean true, define to use in API parameters or return value #define FALSE (0) ///< Boolean false, define to use in API parameters or return value #define ENABLE (1) ///< Enable, define to use in API parameters #define DISABLE (0) ///< Disable, define to use in API parameters #define Successful 0 ///< Function return value success #define Fail 1 ///< Function return value failed /* Define one bit mask */ #define BIT0 (0x00000001) ///< Bit 0 mask of an 32 bit integer #define BIT1 (0x00000002) ///< Bit 1 mask of an 32 bit integer #define BIT2 (0x00000004) ///< Bit 2 mask of an 32 bit integer #define BIT3 (0x00000008) ///< Bit 3 mask of an 32 bit integer #define BIT4 (0x00000010) ///< Bit 4 mask of an 32 bit integer #define BIT5 (0x00000020) ///< Bit 5 mask of an 32 bit integer #define BIT6 (0x00000040) ///< Bit 6 mask of an 32 bit integer #define BIT7 (0x00000080) ///< Bit 7 mask of an 32 bit integer #define BIT8 (0x00000100) ///< Bit 8 mask of an 32 bit integer #define BIT9 (0x00000200) ///< Bit 9 mask of an 32 bit integer #define BIT10 (0x00000400) ///< Bit 10 mask of an 32 bit integer #define BIT11 (0x00000800) ///< Bit 11 mask of an 32 bit integer #define BIT12 (0x00001000) ///< Bit 12 mask of an 32 bit integer #define BIT13 (0x00002000) ///< Bit 13 mask of an 32 bit integer #define BIT14 (0x00004000) ///< Bit 14 mask of an 32 bit integer #define BIT15 (0x00008000) ///< Bit 15 mask of an 32 bit integer #define BIT16 (0x00010000) ///< Bit 16 mask of an 32 bit integer #define BIT17 (0x00020000) ///< Bit 17 mask of an 32 bit integer #define BIT18 (0x00040000) ///< Bit 18 mask of an 32 bit integer #define BIT19 (0x00080000) ///< Bit 19 mask of an 32 bit integer #define BIT20 (0x00100000) ///< Bit 20 mask of an 32 bit integer #define BIT21 (0x00200000) ///< Bit 21 mask of an 32 bit integer #define BIT22 (0x00400000) ///< Bit 22 mask of an 32 bit integer #define BIT23 (0x00800000) ///< Bit 23 mask of an 32 bit integer #define BIT24 (0x01000000) ///< Bit 24 mask of an 32 bit integer #define BIT25 (0x02000000) ///< Bit 25 mask of an 32 bit integer #define BIT26 (0x04000000) ///< Bit 26 mask of an 32 bit integer #define BIT27 (0x08000000) ///< Bit 27 mask of an 32 bit integer #define BIT28 (0x10000000) ///< Bit 28 mask of an 32 bit integer #define BIT29 (0x20000000) ///< Bit 29 mask of an 32 bit integer #define BIT30 (0x40000000) ///< Bit 30 mask of an 32 bit integer #define BIT31 (0x80000000) ///< Bit 31 mask of an 32 bit integer /* Byte Mask Definitions */ #define BYTE0_Msk (0x000000FF) ///< Mask to get bit0~bit7 from a 32 bit integer #define BYTE1_Msk (0x0000FF00) ///< Mask to get bit8~bit15 from a 32 bit integer #define BYTE2_Msk (0x00FF0000) ///< Mask to get bit16~bit23 from a 32 bit integer #define BYTE3_Msk (0xFF000000) ///< Mask to get bit24~bit31 from a 32 bit integer #define GET_BYTE0(u32Param) ((u32Param & BYTE0_Msk) ) /*!< Extract Byte 0 (Bit 0~ 7) from parameter u32Param */ #define GET_BYTE1(u32Param) ((u32Param & BYTE1_Msk) >> 8) /*!< Extract Byte 1 (Bit 8~15) from parameter u32Param */ #define GET_BYTE2(u32Param) ((u32Param & BYTE2_Msk) >> 16) /*!< Extract Byte 2 (Bit 16~23) from parameter u32Param */ #define GET_BYTE3(u32Param) ((u32Param & BYTE3_Msk) >> 24) /*!< Extract Byte 3 (Bit 24~31) from parameter u32Param */ #ifdef __cplusplus #define __I volatile /*!< Defines 'read only' permissions */ #else #define __I volatile const /*!< Defines 'read only' permissions */ #endif #define __O volatile /*!< Defines 'write only' permissions */ #define __IO volatile /*!< Defines 'read / write' permissions */ #endif /* __NUC980_H__ */ /*@}*/ /* end of group Legacy_Constants */