Skip to content

R
rt-thread

Mozi / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 0
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 91e13b5d 编写于 作者: 鹅福哥's avatar 鹅福哥 提交者： guo
浏览文件
操作

删除了未完善的驱动文件及其配置文件

上级 bff97ce2
隐藏空白更改
内联 并排
Showing with 3 addition and 1028 deletion
bsp/mm32/libraries/HAL_Drivers/config/mm32f3277g8p/spi_config.h 已删除 100644 → 0
浏览文件 @ bff97ce2
/**
* @file spi_config.h
* @author 100ask development team
* @brief
* @version 0.1
* @date 2022-06-16
*
* @copyright Copyright (c) 2022 Chongqing 100ASK Technology Co., LTD
*
*/
#ifndef __SPI_CONFIG_H__
#define __SPI_CONFIG_H__
#include <rtthread.h>
#ifdef __cplusplus
extern "C" {
#endif
#ifdef BSP_USING_SPI1
#ifndef SPI1_BUS_CONFIG
#define SPI1_BUS_CONFIG \
{ \
.Instance = SPI1, \
.bus_name = "spi1", \
}
#endif /* SPI1_BUS_CONFIG */
#endif /* BSP_USING_SPI1 */
#ifdef BSP_SPI1_TX_USING_DMA
#ifndef SPI1_TX_DMA_CONFIG
#define SPI1_TX_DMA_CONFIG \
{ \
.dma_port = SPI1_TX_DMA_PORT, \
.dma_rcc = SPI1_TX_DMA_RCC, \
.Instance = SPI1_TX_DMA_INSTANCE, \
.dma_irq = SPI1_TX_DMA_IRQ, \
}
#endif /* SPI1_TX_DMA_CONFIG */
#endif /* BSP_SPI1_TX_USING_DMA */
#ifdef BSP_SPI1_RX_USING_DMA
#ifndef SPI1_RX_DMA_CONFIG
#define SPI1_RX_DMA_CONFIG \
{ \
.dma_rcc = SPI1_RX_DMA_RCC, \
.Instance = SPI1_RX_DMA_INSTANCE, \
.dma_irq = SPI1_RX_DMA_IRQ, \
}
#endif /* SPI1_RX_DMA_CONFIG */
#endif /* BSP_SPI1_RX_USING_DMA */
#ifdef BSP_USING_SPI2
#ifndef SPI2_BUS_CONFIG
#define SPI2_BUS_CONFIG \
{ \
.Instance = SPI2, \
.bus_name = "spi2", \
}
#endif /* SPI2_BUS_CONFIG */
#endif /* BSP_USING_SPI2 */
#ifdef BSP_SPI2_TX_USING_DMA
#ifndef SPI2_TX_DMA_CONFIG
#define SPI2_TX_DMA_CONFIG \
{ \
.dma_rcc = SPI2_TX_DMA_RCC, \
.Instance = SPI2_TX_DMA_INSTANCE, \
.dma_irq = SPI2_TX_DMA_IRQ, \
}
#endif /* SPI2_TX_DMA_CONFIG */
#endif /* BSP_SPI2_TX_USING_DMA */
#ifdef BSP_SPI2_RX_USING_DMA
#ifndef SPI2_RX_DMA_CONFIG
#define SPI2_RX_DMA_CONFIG \
{ \
.dma_rcc = SPI2_RX_DMA_RCC, \
.Instance = SPI2_RX_DMA_INSTANCE, \
.dma_irq = SPI2_RX_DMA_IRQ, \
}
#endif /* SPI2_RX_DMA_CONFIG */
#endif /* BSP_SPI2_RX_USING_DMA */
#ifdef BSP_USING_SPI3
#ifndef SPI3_BUS_CONFIG
#define SPI3_BUS_CONFIG \
{ \
.Instance = SPI3, \
.bus_name = "spi3", \
}
#endif /* SPI3_BUS_CONFIG */
#endif /* BSP_USING_SPI3 */
#ifdef BSP_SPI3_TX_USING_DMA
#ifndef SPI3_TX_DMA_CONFIG
#define SPI3_TX_DMA_CONFIG \
{ \
.dma_rcc = SPI3_TX_DMA_RCC, \
.Instance = SPI3_TX_DMA_INSTANCE, \
.dma_irq = SPI3_TX_DMA_IRQ, \
}
#endif /* SPI3_TX_DMA_CONFIG */
#endif /* BSP_SPI3_TX_USING_DMA */
#ifdef BSP_SPI3_RX_USING_DMA
#ifndef SPI3_RX_DMA_CONFIG
#define SPI3_RX_DMA_CONFIG \
{ \
.dma_rcc = SPI3_RX_DMA_RCC, \
.Instance = SPI3_RX_DMA_INSTANCE, \
.dma_irq = SPI3_RX_DMA_IRQ, \
}
#endif /* SPI3_RX_DMA_CONFIG */
#endif /* BSP_SPI3_RX_USING_DMA */
#ifdef __cplusplus
}
#endif
#endif /*__SPI_CONFIG_H__ */
bsp/mm32/libraries/HAL_Drivers/drv_config.h
浏览文件 @ 91e13b5d
......@@ -19,7 +19,6 @@ extern "C" {
#if defined(SOC_SERIES_MM32F3277)
#include "mm32f3277g8p/dma_config.h"
#include "mm32f3277g8p/uart_config.h"
#include "mm32f3277g8p/spi_config.h"
#endif
#ifdef __cplusplus
......
bsp/mm32/libraries/HAL_Drivers/drv_spi.c 已删除 100644 → 0
浏览文件 @ bff97ce2
/**
* @file drv_spi.c
* @author 100ask development team
* @brief
* @version 0.1
* @date 2022-06-16
*
* @copyright Copyright (c) 2022 Chongqing 100ASK Technology Co., LTD
*
*/
#include <rtthread.h>
#include <rtdevice.h>
#define RT_USING_SPI
#define BSP_USING_SPI1
#define BSP_SPI1_TX_USING_DMA
#define BSP_SPI1_RX_USING_DMA
#ifdef RT_USING_SPI
#if defined(BSP_USING_SPI1) || defined(BSP_USING_SPI2) || defined(BSP_USING_SPI3)
#include "drv_spi.h"
#include "drv_config.h"
#include <string.h>
//#define DRV_DEBUG
#define LOG_TAG "drv.spi"
#include <drv_log.h>
enum
{
#ifdef BSP_USING_SPI1
SPI1_INDEX,
#endif
#ifdef BSP_USING_SPI2
SPI2_INDEX,
#endif
#ifdef BSP_USING_SPI3
SPI3_INDEX,
#endif
};
static struct mm32_spi_config spi_config[] =
{
#ifdef BSP_USING_SPI1
SPI1_BUS_CONFIG,
#endif
#ifdef BSP_USING_SPI2
SPI2_BUS_CONFIG,
#endif
#ifdef BSP_USING_SPI3
SPI3_BUS_CONFIG,
#endif
};
static struct mm32_spi spi_bus_obj[sizeof(spi_config) / sizeof(spi_config[0])] = {0};
static rt_err_t mm32_spi_init(struct mm32_spi *spi_drv, struct rt_spi_configuration *cfg)
{
RT_ASSERT(spi_drv != RT_NULL);
RT_ASSERT(cfg != RT_NULL);
SPI_Master_Init_Type *spi_handle = &spi_drv->handle;
spi_handle->ClockFreqHz = Drv_Get_APB1_Clock();
if (cfg->data_width == 8)
{
spi_handle->DataWidth = SPI_DataWidth_8b;
}
else if (cfg->data_width == 16)
{
spi_handle->DataWidth = SPI_DataWidth_8b;
}
else
{
return RT_EIO;
}
if (cfg->mode & RT_SPI_CPOL)
{
spi_handle->PolarityPhase = SPI_PolarityPhase_Alt0;
}
else
{
spi_handle->PolarityPhase = SPI_PolarityPhase_Alt1;
}
if (cfg->mode & RT_SPI_NO_CS)
{
spi_handle->AutoCS = RT_FALSE;
}
else
{
spi_handle->AutoCS = RT_TRUE;
}
uint32_t SPI_APB_CLOCK;
SPI_APB_CLOCK = Drv_Get_APB1_Clock();
if (cfg->max_hz >= SPI_APB_CLOCK / 2)
{
spi_handle->BaudRate= (SPI_APB_CLOCK>>1);
}
else
{
spi_handle->BaudRate = cfg->max_hz;
}
LOG_D("sys freq: %d, pclk2 freq: %d, SPI limiting freq: %d, BaudRatePrescaler: %d",
HAL_RCC_GetSysClockFreq(),
SPI_APB_CLOCK,
cfg->max_hz,
spi_handle->BaudRate);
if (cfg->mode & RT_SPI_MSB)
{
spi_handle->LSB = RT_FALSE;
}
else
{
spi_handle->LSB = RT_TRUE;
}
spi_handle->XferMode = SPI_XferMode_TxRx;
extern void SPI_MspInit(SPI_Type *mspi, , uint8_t autocs);
SPI_MspInit(spi_drv->config->Instance, cfg->mode & RT_SPI_NO_CS);
SPI_InitMaster(spi_drv->config->Instance, spi_handle);
/* DMA configuration */
extern int DMA_MspInit(DMA_Channel_Init_Type handle, \
DMA_Type *dma, \
uint32_t req, \
IRQn_Type irqn, \
rt_uint32_t rcc, \
uint8_t *buf, \
uint16_t buf_len);
if (spi_drv->spi_dma_flag & SPI_USING_RX_DMA_FLAG)
{
int ret = DMA_MspInit(spi_drv->dma.handle_rx, \
spi_drv->config->dma_rx->Instance, \
spi_drv->config->dma_rx->dma_req, \
spi_drv->config->dma_rx->dma_irq, \
spi_drv->config->dma_rx->dma_rcc, \
spi_drv->dma.rx_buf_len, \
spi_drv->dma.rx_buf);
if(ret == -1)
{
LOG_D("%s init DMA failed.\r\n", spi_drv->config->bus_name);
return RT_ERROR;
}
SPI_EnableDMA(spi_drv->config->dma_rx->Instance, RT_TRUE);
}
if (spi_drv->spi_dma_flag & SPI_USING_TX_DMA_FLAG)
{
int ret = DMA_MspInit(spi_drv->dma.handle_tx, \
spi_drv->config->dma_tx->Instance, \
spi_drv->config->dma_tx->dma_req, \
spi_drv->config->dma_tx->dma_irq, \
spi_drv->config->dma_tx->dma_rcc,
spi_drv->dma.tx_buf_len, \
spi_drv->dma.tx_buf);
if(ret == -1)
{
LOG_D("%s init DMA failed.\r\n", spi_drv->config->bus_name);
return RT_ERROR;
}
SPI_EnableDMA(spi_drv->config->dma_tx->Instance, RT_TRUE);
}
SPI_Enable(spi_drv->config->Instance, RT_TRUE);
LOG_D("%s init done", spi_drv->config->bus_name);
return RT_EOK;
}
static rt_uint32_t spixfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
HAL_StatusTypeDef state;
rt_size_t message_length, already_send_length;
rt_uint16_t send_length;
rt_uint8_t *recv_buf;
const rt_uint8_t *send_buf;
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->bus != RT_NULL);
RT_ASSERT(device->bus->parent.user_data != RT_NULL);
RT_ASSERT(message != RT_NULL);
struct mm32_spi *spi_drv = rt_container_of(device->bus, struct mm32_spi, spi_bus);
SPI_Master_Init_Type *spi_handle = &spi_drv->handle;
struct mm32_hw_spi_cs *cs = device->parent.user_data;
if (message->cs_take)
{
GPIO_WriteBit(cs->GPIOx, cs->GPIO_Pin, 0);
}
LOG_D("%s transfer prepare and start", spi_drv->config->bus_name);
LOG_D("%s sendbuf: %X, recvbuf: %X, length: %d",
spi_drv->config->bus_name,
(uint32_t)message->send_buf,
(uint32_t)message->recv_buf, message->length);
message_length = message->length;
recv_buf = message->recv_buf;
send_buf = message->send_buf;
while (message_length)
{
/* the HAL library use uint16 to save the data length */
if (message_length > 65535)
{
send_length = 65535;
message_length = message_length - 65535;
}
else
{
send_length = message_length;
message_length = 0;
}
/* calculate the start address */
already_send_length = message->length - send_length - message_length;
send_buf = (rt_uint8_t *)message->send_buf + already_send_length;
recv_buf = (rt_uint8_t *)message->recv_buf + already_send_length;
/* start once data exchange in DMA mode */
if (message->send_buf && message->recv_buf)
{
if ((spi_drv->spi_dma_flag & SPI_USING_TX_DMA_FLAG) && (spi_drv->spi_dma_flag & SPI_USING_RX_DMA_FLAG))
{
state = HAL_SPI_TransmitReceive_DMA(spi_handle, (uint8_t *)send_buf, (uint8_t *)recv_buf, send_length);
}
else
{
state = HAL_SPI_TransmitReceive(spi_handle, (uint8_t *)send_buf, (uint8_t *)recv_buf, send_length, 1000);
}
}
else if (message->send_buf)
{
if (spi_drv->spi_dma_flag & SPI_USING_TX_DMA_FLAG)
{
state = HAL_SPI_Transmit_DMA(spi_handle, (uint8_t *)send_buf, send_length);
}
else
{
state = HAL_SPI_Transmit(spi_handle, (uint8_t *)send_buf, send_length, 1000);
}
}
else
{
memset((uint8_t *)recv_buf, 0xff, send_length);
if (spi_drv->spi_dma_flag & SPI_USING_RX_DMA_FLAG)
{
state = HAL_SPI_Receive_DMA(spi_handle, (uint8_t *)recv_buf, send_length);
}
else
{
state = HAL_SPI_Receive(spi_handle, (uint8_t *)recv_buf, send_length, 1000);
}
}
if (state != HAL_OK)
{
LOG_I("spi transfer error : %d", state);
message->length = 0;
spi_handle->State = HAL_SPI_STATE_READY;
}
else
{
LOG_D("%s transfer done", spi_drv->config->bus_name);
}
/* For simplicity reasons, this example is just waiting till the end of the
transfer, but application may perform other tasks while transfer operation
is ongoing. */
while (HAL_SPI_GetState(spi_handle) != HAL_SPI_STATE_READY);
}
if (message->cs_release)
{
HAL_GPIO_WritePin(cs->GPIOx, cs->GPIO_Pin, GPIO_PIN_SET);
}
return message->length;
}
static rt_err_t spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configuration)
{
RT_ASSERT(device != RT_NULL);
RT_ASSERT(configuration != RT_NULL);
struct mm32_spi *spi_drv = rt_container_of(device->bus, struct mm32_spi, spi_bus);
spi_drv->cfg = configuration;
return mm32_spi_init(spi_drv, configuration);
}
static const struct rt_spi_ops stm_spi_ops =
{
.configure = spi_configure,
.xfer = spixfer,
};
static int rt_hw_spi_bus_init(void)
{
rt_err_t result;
for (int i = 0; i < sizeof(spi_config) / sizeof(spi_config[0]); i++)
{
spi_bus_obj[i].config = &spi_config[i];
spi_bus_obj[i].spi_bus.parent.user_data = &spi_config[i];
spi_bus_obj[i].handle.Instance = spi_config[i].Instance;
if (spi_bus_obj[i].spi_dma_flag & SPI_USING_RX_DMA_FLAG)
{
/* Configure the DMA handler for Transmission process */
spi_bus_obj[i].dma.handle_rx.Instance = spi_config[i].dma_rx->Instance;
#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
spi_bus_obj[i].dma.handle_rx.Init.Channel = spi_config[i].dma_rx->channel;
#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0)
spi_bus_obj[i].dma.handle_rx.Init.Request = spi_config[i].dma_rx->request;
#endif
spi_bus_obj[i].dma.handle_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
spi_bus_obj[i].dma.handle_rx.Init.PeriphInc = DMA_PINC_DISABLE;
spi_bus_obj[i].dma.handle_rx.Init.MemInc = DMA_MINC_ENABLE;
spi_bus_obj[i].dma.handle_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
spi_bus_obj[i].dma.handle_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
spi_bus_obj[i].dma.handle_rx.Init.Mode = DMA_NORMAL;
spi_bus_obj[i].dma.handle_rx.Init.Priority = DMA_PRIORITY_HIGH;
#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
spi_bus_obj[i].dma.handle_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
spi_bus_obj[i].dma.handle_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
spi_bus_obj[i].dma.handle_rx.Init.MemBurst = DMA_MBURST_INC4;
spi_bus_obj[i].dma.handle_rx.Init.PeriphBurst = DMA_PBURST_INC4;
#endif
{
rt_uint32_t tmpreg = 0x00U;
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32F0)
/* enable DMA clock && Delay after an RCC peripheral clock enabling*/
SET_BIT(RCC->AHBENR, spi_config[i].dma_rx->dma_rcc);
tmpreg = READ_BIT(RCC->AHBENR, spi_config[i].dma_rx->dma_rcc);
#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4)
SET_BIT(RCC->AHB1ENR, spi_config[i].dma_rx->dma_rcc);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1ENR, spi_config[i].dma_rx->dma_rcc);
#endif
UNUSED(tmpreg); /* To avoid compiler warnings */
}
}
if (spi_bus_obj[i].spi_dma_flag & SPI_USING_TX_DMA_FLAG)
{
/* Configure the DMA handler for Transmission process */
spi_bus_obj[i].dma.handle_tx.Instance = spi_config[i].dma_tx->Instance;
#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
spi_bus_obj[i].dma.handle_tx.Init.Channel = spi_config[i].dma_tx->channel;
#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32G0)
spi_bus_obj[i].dma.handle_tx.Init.Request = spi_config[i].dma_tx->request;
#endif
spi_bus_obj[i].dma.handle_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
spi_bus_obj[i].dma.handle_tx.Init.PeriphInc = DMA_PINC_DISABLE;
spi_bus_obj[i].dma.handle_tx.Init.MemInc = DMA_MINC_ENABLE;
spi_bus_obj[i].dma.handle_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
spi_bus_obj[i].dma.handle_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
spi_bus_obj[i].dma.handle_tx.Init.Mode = DMA_NORMAL;
spi_bus_obj[i].dma.handle_tx.Init.Priority = DMA_PRIORITY_LOW;
#if defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
spi_bus_obj[i].dma.handle_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
spi_bus_obj[i].dma.handle_tx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
spi_bus_obj[i].dma.handle_tx.Init.MemBurst = DMA_MBURST_INC4;
spi_bus_obj[i].dma.handle_tx.Init.PeriphBurst = DMA_PBURST_INC4;
#endif
{
rt_uint32_t tmpreg = 0x00U;
#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32F0)
/* enable DMA clock && Delay after an RCC peripheral clock enabling*/
SET_BIT(RCC->AHBENR, spi_config[i].dma_tx->dma_rcc);
tmpreg = READ_BIT(RCC->AHBENR, spi_config[i].dma_tx->dma_rcc);
#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4)
SET_BIT(RCC->AHB1ENR, spi_config[i].dma_tx->dma_rcc);
/* Delay after an RCC peripheral clock enabling */
tmpreg = READ_BIT(RCC->AHB1ENR, spi_config[i].dma_tx->dma_rcc);
#endif
UNUSED(tmpreg); /* To avoid compiler warnings */
}
}
result = rt_spi_bus_register(&spi_bus_obj[i].spi_bus, spi_config[i].bus_name, &stm_spi_ops);
RT_ASSERT(result == RT_EOK);
LOG_D("%s bus init done", spi_config[i].bus_name);
}
return result;
}
/**
* Attach the spi device to SPI bus, this function must be used after initialization.
*/
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, GPIO_TypeDef *cs_gpiox, uint16_t cs_gpio_pin)
{
RT_ASSERT(bus_name != RT_NULL);
RT_ASSERT(device_name != RT_NULL);
rt_err_t result;
struct rt_spi_device *spi_device;
struct mm32_hw_spi_cs *cs_pin;
/* initialize the cs pin && select the slave*/
GPIO_InitTypeDef GPIO_Initure;
GPIO_Initure.Pin = cs_gpio_pin;
GPIO_Initure.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_Initure.Pull = GPIO_PULLUP;
GPIO_Initure.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(cs_gpiox, &GPIO_Initure);
HAL_GPIO_WritePin(cs_gpiox, cs_gpio_pin, GPIO_PIN_SET);
/* attach the device to spi bus*/
spi_device = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device));
RT_ASSERT(spi_device != RT_NULL);
cs_pin = (struct mm32_hw_spi_cs *)rt_malloc(sizeof(struct mm32_hw_spi_cs));
RT_ASSERT(cs_pin != RT_NULL);
cs_pin->GPIOx = cs_gpiox;
cs_pin->GPIO_Pin = cs_gpio_pin;
result = rt_spi_bus_attach_device(spi_device, device_name, bus_name, (void *)cs_pin);
if (result != RT_EOK)
{
LOG_E("%s attach to %s faild, %d\n", device_name, bus_name, result);
}
RT_ASSERT(result == RT_EOK);
LOG_D("%s attach to %s done", device_name, bus_name);
return result;
}
#if defined(BSP_SPI1_TX_USING_DMA) || defined(BSP_SPI1_RX_USING_DMA)
void SPI1_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_SPI_IRQHandler(&spi_bus_obj[SPI1_INDEX].handle);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_RX_USING_DMA)
/**
* @brief This function handles DMA Rx interrupt request.
* @param None
* @retval None
*/
void SPI1_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI1_INDEX].dma.handle_rx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_TX_USING_DMA)
/**
* @brief This function handles DMA Tx interrupt request.
* @param None
* @retval None
*/
void SPI1_DMA_TX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI1_INDEX].dma.handle_tx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(BSP_USING_SPI1) && defined(BSP_SPI_USING_DMA) */
#if defined(BSP_SPI2_TX_USING_DMA) || defined(BSP_SPI2_RX_USING_DMA)
void SPI2_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_SPI_IRQHandler(&spi_bus_obj[SPI2_INDEX].handle);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_RX_USING_DMA)
/**
* @brief This function handles DMA Rx interrupt request.
* @param None
* @retval None
*/
void SPI2_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI2_INDEX].dma.handle_rx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_TX_USING_DMA)
/**
* @brief This function handles DMA Tx interrupt request.
* @param None
* @retval None
*/
void SPI2_DMA_TX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI2_INDEX].dma.handle_tx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(BSP_USING_SPI2) && defined(BSP_SPI_USING_DMA) */
#if defined(BSP_SPI3_TX_USING_DMA) || defined(BSP_SPI3_RX_USING_DMA)
void SPI3_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_SPI_IRQHandler(&spi_bus_obj[SPI3_INDEX].handle);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI3) && defined(BSP_SPI3_RX_USING_DMA)
/**
* @brief This function handles DMA Rx interrupt request.
* @param None
* @retval None
*/
void SPI3_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI3_INDEX].dma.handle_rx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI3) && defined(BSP_SPI3_TX_USING_DMA)
/**
* @brief This function handles DMA Tx interrupt request.
* @param None
* @retval None
*/
void SPI3_DMA_TX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI3_INDEX].dma.handle_tx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(BSP_USING_SPI3) && defined(BSP_SPI_USING_DMA) */
#if defined(BSP_SPI4_TX_USING_DMA) || defined(BSP_SPI4_RX_USING_DMA)
void SPI4_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_SPI_IRQHandler(&spi_bus_obj[SPI4_INDEX].handle);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI4) && defined(BSP_SPI4_RX_USING_DMA)
/**
* @brief This function handles DMA Rx interrupt request.
* @param None
* @retval None
*/
void SPI4_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI4_INDEX].dma.handle_rx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI4) && defined(BSP_SPI4_TX_USING_DMA)
/**
* @brief This function handles DMA Tx interrupt request.
* @param None
* @retval None
*/
void SPI4_DMA_TX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI4_INDEX].dma.handle_tx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(BSP_USING_SPI4) && defined(BSP_SPI_USING_DMA) */
#if defined(BSP_SPI5_TX_USING_DMA) || defined(BSP_SPI5_RX_USING_DMA)
void SPI5_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_SPI_IRQHandler(&spi_bus_obj[SPI5_INDEX].handle);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI5) && defined(BSP_SPI5_RX_USING_DMA)
/**
* @brief This function handles DMA Rx interrupt request.
* @param None
* @retval None
*/
void SPI5_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI5_INDEX].dma.handle_rx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI5) && defined(BSP_SPI5_TX_USING_DMA)
/**
* @brief This function handles DMA Tx interrupt request.
* @param None
* @retval None
*/
void SPI5_DMA_TX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI5_INDEX].dma.handle_tx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(BSP_USING_SPI5) && defined(BSP_SPI_USING_DMA) */
#if defined(BSP_USING_SPI6) && defined(BSP_SPI6_RX_USING_DMA)
/**
* @brief This function handles DMA Rx interrupt request.
* @param None
* @retval None
*/
void SPI6_DMA_RX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI6_INDEX].dma.handle_rx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif
#if defined(BSP_USING_SPI6) && defined(BSP_SPI6_TX_USING_DMA)
/**
* @brief This function handles DMA Tx interrupt request.
* @param None
* @retval None
*/
void SPI6_DMA_TX_IRQHandler(void)
{
/* enter interrupt */
rt_interrupt_enter();
HAL_DMA_IRQHandler(&spi_bus_obj[SPI6_INDEX].dma.handle_tx);
/* leave interrupt */
rt_interrupt_leave();
}
#endif /* defined(BSP_USING_SPI6) && defined(BSP_SPI_USING_DMA) */
static void mm32_get_dma_info(void)
{
#ifdef BSP_SPI1_RX_USING_DMA
spi_bus_obj[SPI1_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG;
static struct dma_config spi1_dma_rx = SPI1_RX_DMA_CONFIG;
spi_config[SPI1_INDEX].dma_rx = &spi1_dma_rx;
#endif
#ifdef BSP_SPI1_TX_USING_DMA
spi_bus_obj[SPI1_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG;
static struct dma_config spi1_dma_tx = SPI1_TX_DMA_CONFIG;
spi_config[SPI1_INDEX].dma_tx = &spi1_dma_tx;
#endif
#ifdef BSP_SPI2_RX_USING_DMA
spi_bus_obj[SPI2_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG;
static struct dma_config spi2_dma_rx = SPI2_RX_DMA_CONFIG;
spi_config[SPI2_INDEX].dma_rx = &spi2_dma_rx;
#endif
#ifdef BSP_SPI2_TX_USING_DMA
spi_bus_obj[SPI2_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG;
static struct dma_config spi2_dma_tx = SPI2_TX_DMA_CONFIG;
spi_config[SPI2_INDEX].dma_tx = &spi2_dma_tx;
#endif
#ifdef BSP_SPI3_RX_USING_DMA
spi_bus_obj[SPI3_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG;
static struct dma_config spi3_dma_rx = SPI3_RX_DMA_CONFIG;
spi_config[SPI3_INDEX].dma_rx = &spi3_dma_rx;
#endif
#ifdef BSP_SPI3_TX_USING_DMA
spi_bus_obj[SPI3_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG;
static struct dma_config spi3_dma_tx = SPI3_TX_DMA_CONFIG;
spi_config[SPI3_INDEX].dma_tx = &spi3_dma_tx;
#endif
#ifdef BSP_SPI4_RX_USING_DMA
spi_bus_obj[SPI4_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG;
static struct dma_config spi4_dma_rx = SPI4_RX_DMA_CONFIG;
spi_config[SPI4_INDEX].dma_rx = &spi4_dma_rx;
#endif
#ifdef BSP_SPI4_TX_USING_DMA
spi_bus_obj[SPI4_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG;
static struct dma_config spi4_dma_tx = SPI4_TX_DMA_CONFIG;
spi_config[SPI4_INDEX].dma_tx = &spi4_dma_tx;
#endif
#ifdef BSP_SPI5_RX_USING_DMA
spi_bus_obj[SPI5_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG;
static struct dma_config spi5_dma_rx = SPI5_RX_DMA_CONFIG;
spi_config[SPI5_INDEX].dma_rx = &spi5_dma_rx;
#endif
#ifdef BSP_SPI5_TX_USING_DMA
spi_bus_obj[SPI5_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG;
static struct dma_config spi5_dma_tx = SPI5_TX_DMA_CONFIG;
spi_config[SPI5_INDEX].dma_tx = &spi5_dma_tx;
#endif
#ifdef BSP_SPI6_RX_USING_DMA
spi_bus_obj[SPI6_INDEX].spi_dma_flag |= SPI_USING_RX_DMA_FLAG;
static struct dma_config spi6_dma_rx = SPI6_RX_DMA_CONFIG;
spi_config[SPI6_INDEX].dma_rx = &spi6_dma_rx;
#endif
#ifdef BSP_SPI6_TX_USING_DMA
spi_bus_obj[SPI6_INDEX].spi_dma_flag |= SPI_USING_TX_DMA_FLAG;
static struct dma_config spi6_dma_tx = SPI6_TX_DMA_CONFIG;
spi_config[SPI6_INDEX].dma_tx = &spi6_dma_tx;
#endif
}
#if defined(SOC_SERIES_STM32F0)
void SPI1_DMA_RX_TX_IRQHandler(void)
{
#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_TX_USING_DMA)
SPI1_DMA_TX_IRQHandler();
#endif
#if defined(BSP_USING_SPI1) && defined(BSP_SPI1_RX_USING_DMA)
SPI1_DMA_RX_IRQHandler();
#endif
}
void SPI2_DMA_RX_TX_IRQHandler(void)
{
#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_TX_USING_DMA)
SPI2_DMA_TX_IRQHandler();
#endif
#if defined(BSP_USING_SPI2) && defined(BSP_SPI2_RX_USING_DMA)
SPI2_DMA_RX_IRQHandler();
#endif
}
#endif /* SOC_SERIES_STM32F0 */
int rt_hw_spi_init(void)
{
mm32_get_dma_info();
return rt_hw_spi_bus_init();
}
INIT_BOARD_EXPORT(rt_hw_spi_init);
#endif /* BSP_USING_SPI1 || BSP_USING_SPI2 || BSP_USING_SPI3 */
#endif /* RT_USING_SPI */
bsp/mm32/libraries/HAL_Drivers/drv_spi.h 已删除 100644 → 0
浏览文件 @ bff97ce2
/**
* @file drv_spi.h
* @author 100ask development team
* @brief
* @version 0.1
* @date 2022-06-16
*
* @copyright Copyright (c) 2022 Chongqing 100ASK Technology Co., LTD
*
*/
#ifndef __DRV_SPI_H_
#define __DRV_SPI_H_
#include <rtthread.h>
#include "rtdevice.h"
#include <rthw.h>
#include "drv_common.h"
#include "drv_dma.h"
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, GPIO_TypeDef* cs_gpiox, uint16_t cs_gpio_pin);
struct mm32_hw_spi_cs
{
GPIO_Type* GPIOx;
uint16_t GPIO_Pin;
};
struct mm32_spi_config
{
SPI_Type *Instance;
char *bus_name;
struct dma_config *dma_rx, *dma_tx;
};
struct stm32_spi_device
{
rt_uint32_t pin;
char *bus_name;
char *device_name;
};
#define SPI_USING_RX_DMA_FLAG (1<<0)
#define SPI_USING_TX_DMA_FLAG (1<<1)
/* stm32 spi dirver class */
struct mm32_spi
{
SPI_Master_Init_Type handle;
struct mm32_spi_config *config;
struct rt_spi_configuration *cfg;
struct
{
rt_uint16_t rx_buf_len;
rt_uint8_t *rx_buf;
DMA_Channel_Init_Type handle_rx;
rt_uint16_t tx_buf_len;
rt_uint8_t *tx_buf;
DMA_Channel_Init_Type handle_tx;
} dma;
rt_uint8_t spi_dma_flag;
struct rt_spi_bus spi_bus;
};
#endif /* __DRV_SPI_H_ */
bsp/mm32/libraries/HAL_Drivers/drv_uart.h
浏览文件 @ 91e13b5d
......@@ -21,7 +21,7 @@ int rt_hw_uart_init(void);
#define UART_INSTANCE_CLEAR_FUNCTION __HAL_UART_CLEAR_FLAG
/* stm32 config class */
/* mm32 config class */
struct mm32_uart_config
{
const char *name;
......@@ -31,7 +31,7 @@ struct mm32_uart_config
struct dma_config *dma_tx;
};
/* stm32 uart dirver class */
/* mm32 uart dirver class */
struct mm32_uart
{
UART_Init_Type handle;
......
bsp/mm32/libraries/Kconfig
浏览文件 @ 91e13b5d
......@@ -4,4 +4,4 @@ config SOC_FAMILY_MM32
config SOC_SERIES_MM32F3277
bool
select ARCH_ARM_CORTEX_M3
select SOC_FAMILY_MM32
\ No newline at end of file
select SOC_FAMILY_MM32
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或