diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1f254bd6c937ece2e6d6a6b1040d954cc923cd7a..98922f7d2d1236dd7fd29fa404447b46189c0222 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -955,7 +955,8 @@ config XSCALE_PMU default y config CPU_HAS_PMU - depends on CPU_V6 || CPU_V7 || XSCALE_PMU + depends on (CPU_V6 || CPU_V7 || XSCALE_PMU) && \ + (!ARCH_OMAP3 || OMAP3_EMU) default y bool diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h index f3eabf1ecec333643273d9f797a7afd70cc4894d..833306ee9e7fec2059c457e7e107d586198c4de6 100644 --- a/arch/arm/include/asm/mach/udc_pxa2xx.h +++ b/arch/arm/include/asm/mach/udc_pxa2xx.h @@ -21,8 +21,8 @@ struct pxa2xx_udc_mach_info { * here. Note that sometimes the signals go through inverters... */ bool gpio_vbus_inverted; - u16 gpio_vbus; /* high == vbus present */ + int gpio_vbus; /* high == vbus present */ bool gpio_pullup_inverted; - u16 gpio_pullup; /* high == pullup activated */ + int gpio_pullup; /* high == pullup activated */ }; diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 6a89567ffc5bc49a326c0a56747aced339fd53db..7bed3daf83b8f27547ac608d574ffb00de8d1871 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -91,7 +91,11 @@ extern void release_thread(struct task_struct *); unsigned long get_wchan(struct task_struct *p); +#if __LINUX_ARM_ARCH__ == 6 +#define cpu_relax() smp_mb() +#else #define cpu_relax() barrier() +#endif /* * Create a new kernel thread diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index c45768614c8aae8cb794cee41b5da85cc7136a2e..de12536d687f69a6fa246038afe9754936d223d9 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -201,7 +201,7 @@ armpmu_event_update(struct perf_event *event, { int shift = 64 - 32; s64 prev_raw_count, new_raw_count; - s64 delta; + u64 delta; again: prev_raw_count = atomic64_read(&hwc->prev_count); diff --git a/arch/arm/mach-mx3/mach-mx31lilly.c b/arch/arm/mach-mx3/mach-mx31lilly.c index d3d5877c750ef2c3ca427a7a2d445a820c500a7c..b2c7f512070fe450b710db83da53ce439a2a2bd4 100644 --- a/arch/arm/mach-mx3/mach-mx31lilly.c +++ b/arch/arm/mach-mx3/mach-mx31lilly.c @@ -115,6 +115,8 @@ static struct platform_device physmap_flash_device = { /* USB */ +#if defined(CONFIG_USB_ULPI) + #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) @@ -244,10 +246,20 @@ static struct mxc_usbh_platform_data usbh2_pdata = { .flags = MXC_EHCI_POWER_PINS_ENABLED, }; -static struct platform_device *devices[] __initdata = { - &smsc91x_device, - &physmap_flash_device, -}; +static void lilly1131_usb_init(void) +{ + usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_usbh1, &usbh1_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +} + +#else +static inline void lilly1131_usb_init(void) {} +#endif /* CONFIG_USB_ULPI */ /* SPI */ @@ -279,6 +291,11 @@ static struct spi_board_info mc13783_dev __initdata = { .platform_data = &mc13783_pdata, }; +static struct platform_device *devices[] __initdata = { + &smsc91x_device, + &physmap_flash_device, +}; + static int mx31lilly_baseboard; core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); @@ -321,13 +338,7 @@ static void __init mx31lilly_board_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ - usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, - USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); - - mxc_register_device(&mxc_usbh1, &usbh1_pdata); - mxc_register_device(&mxc_usbh2, &usbh2_pdata); + lilly1131_usb_init(); } static void __init mx31lilly_timer_init(void) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index d60db87dde0872e32fddae50a0454e4bdfc6161f..fa6a708b40997feb7ae0296c04d91d1afa8930c9 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -697,7 +697,7 @@ static struct i2c_board_info __initdata mioa701_pi2c_devices[] = { }; /* Board I2C devices. */ -static struct i2c_board_info __initdata mioa701_i2c_devices[] = { +static struct i2c_board_info mioa701_i2c_devices[] = { { I2C_BOARD_INFO("mt9m111", 0x5d), }, diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index f5d1ae3db3a46783b4421bf818d50ca4eed1e690..d303c6929d3282803e3b547e9509e7b7aab3b177 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -3,8 +3,9 @@ * * Support for the Zipit Z2 Handheld device. * - * Author: Ken McGuire - * Created: Jan 25, 2009 + * Copyright (C) 2009-2010 Marek Vasut + * + * Based on research and code by: Ken McGuire * Based on mainstone.c as modified for the Zipit Z2. * * This program is free software; you can redistribute it and/or modify @@ -157,21 +158,14 @@ static struct mtd_partition z2_flash_parts[] = { { .name = "U-Boot Bootloader", .offset = 0x0, - .size = 0x20000, - }, - { - .name = "Linux Kernel", - .offset = 0x20000, - .size = 0x220000, - }, - { - .name = "Filesystem", - .offset = 0x240000, - .size = 0x5b0000, - }, - { + .size = 0x40000, + }, { .name = "U-Boot Environment", - .offset = 0x7f0000, + .offset = 0x40000, + .size = 0x60000, + }, { + .name = "Flash", + .offset = 0x60000, .size = MTDPART_SIZ_FULL, }, }; diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index ee5e392430e87e4f45721320e33172f68e933e56..b4575ae9648ee7220ffb40d31359e8f12b7cecbb 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -18,6 +18,7 @@ config REALVIEW_EB_ARM11MP bool "Support ARM11MPCore tile" depends on MACH_REALVIEW_EB select CPU_V6 + select ARCH_HAS_BARRIERS if SMP help Enable support for the ARM11MPCore tile on the Realview platform. @@ -35,6 +36,7 @@ config MACH_REALVIEW_PB11MP select CPU_V6 select ARM_GIC select HAVE_PATA_PLATFORM + select ARCH_HAS_BARRIERS if SMP help Include support for the ARM(R) RealView MPCore Platform Baseboard. PB11MPCore is a platform with an on-board ARM11MPCore and has diff --git a/arch/arm/mach-realview/include/mach/barriers.h b/arch/arm/mach-realview/include/mach/barriers.h new file mode 100644 index 0000000000000000000000000000000000000000..0c5d749d7b5f17f8ad7241506a90dc8dc2d63a89 --- /dev/null +++ b/arch/arm/mach-realview/include/mach/barriers.h @@ -0,0 +1,8 @@ +/* + * Barriers redefined for RealView ARM11MPCore platforms with L220 cache + * controller to work around hardware errata causing the outer_sync() + * operation to deadlock the system. + */ +#define mb() dsb() +#define rmb() dmb() +#define wmb() mb() diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 422ccd70d5f532066eb7ce4f855be243563db32d..4425018fab828c864e662dfb4bfd5db369a76a15 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -457,7 +458,7 @@ static void __init realview_eb_init(void) MACHINE_START(REALVIEW_EB, "ARM-RealView EB") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_EB_UART0_BASE, + .phys_io = REALVIEW_EB_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_EB_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index 96568ebfa2bb1b5b3c76b3990bbb4c7cea66252f..099a1f125cf8f6c10b1720ccdcee7623ff5a73ad 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -351,7 +352,7 @@ static void __init realview_pb1176_init(void) MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PB1176_UART0_BASE, + .phys_io = REALVIEW_PB1176_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB1176_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pb1176_fixup, diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 7fbefbbebaf06e488eae02f5521b4cc7d66b54f7..0e07a5ccb75f56de33bec477f242d93d88bca448 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include #include @@ -373,7 +374,7 @@ static void __init realview_pb11mp_init(void) MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PB11MP_UART0_BASE, + .phys_io = REALVIEW_PB11MP_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PB11MP_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index d3c113b3dfcecef2e32b3788624e2fbd97d26b1d..ac2f06f1ca500e9bd26603b21ba6c6badf046e11 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -323,7 +324,7 @@ static void __init realview_pba8_init(void) MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PBA8_UART0_BASE, + .phys_io = REALVIEW_PBA8_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBA8_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_fixup, diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index a235ba30996ba42341c9c2d28e724d67f34e54af..08fd683adc4ced929eb255fd8da2e3b733850a87 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -409,7 +410,7 @@ static void __init realview_pbx_init(void) MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .phys_io = REALVIEW_PBX_UART0_BASE, + .phys_io = REALVIEW_PBX_UART0_BASE & SECTION_MASK, .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .fixup = realview_pbx_fixup, diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 9b11eedba65fc4163cb33929addc2bf4e6784cbf..6353459bb5671bc2623377529b9a6dfcd5db4a8f 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include @@ -236,7 +237,7 @@ static void ct_ca9x4_init(void) } MACHINE_START(VEXPRESS, "ARM-Versatile Express CA9x4") - .phys_io = V2M_UART0, + .phys_io = V2M_UART0 & SECTION_MASK, .io_pg_offst = (__MMIO_P2V(V2M_UART0) >> 18) & 0xfffc, .boot_params = PHYS_OFFSET + 0x00000100, .map_io = ct_ca9x4_map_io, diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 346ae14824a5ea96365f6e9b66fa8f78cd8cd4bc..101105e5261070118f8039c5ecbcde350792f38f 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -735,6 +735,25 @@ config NEEDS_SYSCALL_FOR_CMPXCHG Forget about fast user space cmpxchg support. It is just not possible. +config DMA_CACHE_RWFO + bool "Enable read/write for ownership DMA cache maintenance" + depends on CPU_V6 && SMP + default y + help + The Snoop Control Unit on ARM11MPCore does not detect the + cache maintenance operations and the dma_{map,unmap}_area() + functions may leave stale cache entries on other CPUs. By + enabling this option, Read or Write For Ownership in the ARMv6 + DMA cache maintenance functions is performed. These LDR/STR + instructions change the cache line state to shared or modified + so that the cache operation has the desired effect. + + Note that the workaround is only valid on processors that do + not perform speculative loads into the D-cache. For such + processors, if cache maintenance operations are not broadcast + in hardware, other workarounds are needed (e.g. cache + maintenance broadcasting in software via FIQ). + config OUTER_CACHE bool @@ -794,6 +813,8 @@ config ARM_L1_CACHE_SHIFT config ARM_DMA_MEM_BUFFERABLE bool "Use non-cacheable memory for DMA" if CPU_V6 && !CPU_V7 + depends on !(MACH_REALVIEW_PB1176 || REALVIEW_EB_ARM11MP || \ + MACH_REALVIEW_PB11MP) default y if CPU_V6 || CPU_V7 help Historically, the kernel has used strongly ordered mappings to diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index e46ecd8471383102b52e5c6475873f3f4bdfc65d..86aa689ef1aa2f6b53cf84a717427df11a25ce1e 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -211,8 +211,9 @@ v6_dma_inv_range: mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line #endif 1: -#ifdef CONFIG_SMP - str r0, [r0] @ write for ownership +#ifdef CONFIG_DMA_CACHE_RWFO + ldr r2, [r0] @ read for ownership + str r2, [r0] @ write for ownership #endif #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c6, 1 @ invalidate D line @@ -234,7 +235,7 @@ v6_dma_inv_range: v6_dma_clean_range: bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: -#ifdef CONFIG_SMP +#ifdef CONFIG_DMA_CACHE_RWFO ldr r2, [r0] @ read for ownership #endif #ifdef HARVARD_CACHE @@ -257,7 +258,7 @@ v6_dma_clean_range: ENTRY(v6_dma_flush_range) bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: -#ifdef CONFIG_SMP +#ifdef CONFIG_DMA_CACHE_RWFO ldr r2, [r0] @ read for ownership str r2, [r0] @ write for ownership #endif @@ -283,9 +284,13 @@ ENTRY(v6_dma_map_area) add r1, r1, r0 teq r2, #DMA_FROM_DEVICE beq v6_dma_inv_range +#ifndef CONFIG_DMA_CACHE_RWFO + b v6_dma_clean_range +#else teq r2, #DMA_TO_DEVICE beq v6_dma_clean_range b v6_dma_flush_range +#endif ENDPROC(v6_dma_map_area) /* @@ -295,6 +300,11 @@ ENDPROC(v6_dma_map_area) * - dir - DMA direction */ ENTRY(v6_dma_unmap_area) +#ifndef CONFIG_DMA_CACHE_RWFO + add r1, r1, r0 + teq r2, #DMA_TO_DEVICE + bne v6_dma_inv_range +#endif mov pc, lr ENDPROC(v6_dma_unmap_area) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 13fa536d82e695ff69b6e74f8e95853cf7199ede..9e7742f0a102fe5c7d091134391db81d93d71726 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -24,15 +24,6 @@ #include #include -/* Sanity check size */ -#if (CONSISTENT_DMA_SIZE % SZ_2M) -#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" -#endif - -#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) -#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) - static u64 get_coherent_dma_mask(struct device *dev) { u64 mask = ISA_DMA_THRESHOLD; @@ -123,6 +114,15 @@ static void __dma_free_buffer(struct page *page, size_t size) } #ifdef CONFIG_MMU +/* Sanity check size */ +#if (CONSISTENT_DMA_SIZE % SZ_2M) +#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB" +#endif + +#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) +#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) + /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations */ diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile index 6187edfbcb777a13a11eb5eea273abb4901b5c7d..a17cc0c6a6b0117f1a590f3d773bf10c69e2581a 100644 --- a/arch/arm/plat-pxa/Makefile +++ b/arch/arm/plat-pxa/Makefile @@ -2,8 +2,9 @@ # Makefile for code common across different PXA processor families # -obj-y := dma.o pmu.o +obj-y := dma.o +obj-$(CONFIG_ARCH_PXA) += pmu.o obj-$(CONFIG_GENERIC_GPIO) += gpio.o obj-$(CONFIG_PXA3xx) += mfp.o obj-$(CONFIG_ARCH_MMP) += mfp.o diff --git a/drivers/power/z2_battery.c b/drivers/power/z2_battery.c index 9cca465436e39d07569db4a0a2535332ae2d5fb6..85064a9f649ed34acbfad8db3980afd42bb208ec 100644 --- a/drivers/power/z2_battery.c +++ b/drivers/power/z2_battery.c @@ -9,19 +9,13 @@ * */ -#include -#include #include -#include -#include -#include -#include -#include #include +#include #include #include -#include -#include +#include +#include #include #define Z2_DEFAULT_NAME "Z2"