# Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserve. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. """ All layers just related to the detection neural network. """ from layer_function_generator import generate_layer_fn from layer_function_generator import autodoc from ..layer_helper import LayerHelper import tensor import ops import nn import math __all__ = [ 'multi_box_head', 'bipartite_match', 'target_assign', 'detection_output', 'ssd_loss', 'detection_map', ] __auto__ = [ 'iou_similarity', 'box_coder', ] __all__ += __auto__ for _OP in set(__auto__): globals()[_OP] = generate_layer_fn(_OP) def detection_output(loc, scores, prior_box, prior_box_var, background_label=0, nms_threshold=0.3, nms_top_k=400, keep_top_k=200, score_threshold=0.01, nms_eta=1.0): """ **Detection Output Layer for Single Shot Multibox Detector (SSD).** This operation is to get the detection results by performing following two steps: 1. Decode input bounding box predictions according to the prior boxes. 2. Get the final detection results by applying multi-class non maximum suppression (NMS). Please note, this operation doesn't clip the final output bounding boxes to the image window. Args: loc(Variable): A 3-D Tensor with shape [N, M, 4] represents the predicted locations of M bounding bboxes. N is the batch size, and each bounding box has four coordinate values and the layout is [xmin, ymin, xmax, ymax]. scores(Variable): A 3-D Tensor with shape [N, M, C] represents the predicted confidence predictions. N is the batch size, C is the class number, M is number of bounding boxes. For each category there are total M scores which corresponding M bounding boxes. prior_box(Variable): A 2-D Tensor with shape [M, 4] holds M boxes, each box is represented as [xmin, ymin, xmax, ymax], [xmin, ymin] is the left top coordinate of the anchor box, if the input is image feature map, they are close to the origin of the coordinate system. [xmax, ymax] is the right bottom coordinate of the anchor box. prior_box_var(Variable): A 2-D Tensor with shape [M, 4] holds M group of variance. background_label(float): The index of background label, the background label will be ignored. If set to -1, then all categories will be considered. nms_threshold(float): The threshold to be used in NMS. nms_top_k(int): Maximum number of detections to be kept according to the confidences aftern the filtering detections based on score_threshold. keep_top_k(int): Number of total bboxes to be kept per image after NMS step. -1 means keeping all bboxes after NMS step. score_threshold(float): Threshold to filter out bounding boxes with low confidence score. If not provided, consider all boxes. nms_eta(float): The parameter for adaptive NMS. Returns: Variable: The detection outputs is a LoDTensor with shape [No, 6]. Each row has six values: [label, confidence, xmin, ymin, xmax, ymax]. `No` is the total number of detections in this mini-batch. For each instance, the offsets in first dimension are called LoD, the offset number is N + 1, N is the batch size. The i-th image has `LoD[i + 1] - LoD[i]` detected results, if it is 0, the i-th image has no detected results. If all images have not detected results, all the elements in LoD are 0, and output tensor only contains one value, which is -1. Examples: .. code-block:: python pb = layers.data(name='prior_box', shape=[10, 4], append_batch_size=False, dtype='float32') pbv = layers.data(name='prior_box_var', shape=[10, 4], append_batch_size=False, dtype='float32') loc = layers.data(name='target_box', shape=[2, 21, 4], append_batch_size=False, dtype='float32') scores = layers.data(name='scores', shape=[2, 21, 10], append_batch_size=False, dtype='float32') nmsed_outs = fluid.layers.detection_output(scores=scores, loc=loc, prior_box=pb, prior_box_var=pbv) """ helper = LayerHelper("detection_output", **locals()) decoded_box = box_coder( prior_box=prior_box, prior_box_var=prior_box_var, target_box=loc, code_type='decode_center_size') nmsed_outs = helper.create_tmp_variable(dtype=decoded_box.dtype) scores = nn.transpose(scores, perm=[0, 2, 1]) helper.append_op( type="multiclass_nms", inputs={'Scores': scores, 'BBoxes': decoded_box}, outputs={'Out': nmsed_outs}, attrs={ 'background_label': 0, 'nms_threshold': nms_threshold, 'nms_top_k': nms_top_k, 'keep_top_k': keep_top_k, 'score_threshold': score_threshold, 'nms_eta': 1.0 }) return nmsed_outs @autodoc() def detection_map(detect_res, label, pos_count=None, true_pos=None, false_pos=None, overlap_threshold=0.3, evaluate_difficult=True, ap_type='integral'): helper = LayerHelper("detection_map", **locals()) map_out = helper.create_tmp_variable(dtype='float32') accum_pos_count_out = helper.create_tmp_variable(dtype='int32') accum_true_pos_out = helper.create_tmp_variable(dtype='float32') accum_false_pos_out = helper.create_tmp_variable(dtype='float32') helper.append_op( type="detection_map", inputs={ 'Label': label, 'DetectRes': detect_res, 'PosCount': pos_count, 'TruePos': true_pos, 'FalsePos': false_pos }, outputs={ 'MAP': map_out, 'AccumPosCount': accum_pos_count_out, 'AccumTruePos': accum_true_pos_out, 'AccumFalsePos': accum_false_pos_out }, attrs={ 'overlap_threshold': overlap_threshold, 'evaluate_difficult': evaluate_difficult, 'ap_type': ap_type }) return map_out, accum_pos_count_out, accum_true_pos_out, accum_false_pos_out def bipartite_match(dist_matrix, match_type=None, dist_threshold=None, name=None): """ **Bipartite matchint operator** This operator is a greedy bipartite matching algorithm, which is used to obtain the matching with the maximum distance based on the input distance matrix. For input 2D matrix, the bipartite matching algorithm can find the matched column for each row, also can find the matched row for each column. And this operator only calculate matched indices from column to row. For each instance, the number of matched indices is the number of of columns of the input ditance matrix. There are two outputs to save matched indices and distance. A simple description, this algothrim matched the best (maximum distance) row entity to the column entity and the matched indices are not duplicated in each row of ColToRowMatchIndices. If the column entity is not matched any row entity, set -1 in ColToRowMatchIndices. Please note that the input DistMat can be LoDTensor (with LoD) or Tensor. If LoDTensor with LoD, the height of ColToRowMatchIndices is batch size. If Tensor, the height of ColToRowMatchIndices is 1. Args: dist_matrix(Variable): This input is a 2-D LoDTensor with shape [K, M]. It is pair-wise distance matrix between the entities represented by each row and each column. For example, assumed one entity is A with shape [K], another entity is B with shape [M]. The dist_matirx[i][j] is the distance between A[i] and B[j]. The bigger the distance is, the better macthing the pairs are. Please note, This tensor can contain LoD information to represent a batch of inputs. One instance of this batch can contain different numbers of entities. match_type(string|None): The type of matching method, should be 'bipartite' or 'per_prediction', 'bipartite' by defalut. dist_threshold(float|None): If `match_type` is 'per_prediction', this threshold is to determine the extra matching bboxes based on the maximum distance, 0.5 by defalut. Returns: match_indices(Variable): A 2-D Tensor with shape [N, M] in int type. N is the batch size. If match_indices[i][j] is -1, it means B[j] does not match any entity in i-th instance. Otherwise, it means B[j] is matched to row match_indices[i][j] in i-th instance. The row number of i-th instance is saved in match_indices[i][j]. match_distance(Variable): A 2-D Tensor with shape [N, M] in float type. N is batch size. If match_indices[i][j] is -1, match_distance[i][j] is also -1.0. Otherwise, assumed match_distance[i][j] = d, and the row offsets of each instance are called LoD. Then match_distance[i][j] = dist_matrix[d+LoD[i]][j]. """ helper = LayerHelper('bipartite_match', **locals()) match_indices = helper.create_tmp_variable(dtype='int32') match_distance = helper.create_tmp_variable(dtype=dist_matrix.dtype) helper.append_op( type='bipartite_match', inputs={'DistMat': dist_matrix}, attrs={ 'match_type': match_type, 'dist_threshold': dist_threshold, }, outputs={ 'ColToRowMatchIndices': match_indices, 'ColToRowMatchDist': match_distance }) return match_indices, match_distance def target_assign(input, matched_indices, negative_indices=None, mismatch_value=None, name=None): """ **Target assigner operator** This operator can be, for given the target bounding boxes or labels, to assign classification and regression targets to each prediction as well as weights to prediction. The weights is used to specify which prediction would not contribute to training loss. For each instance, the output `out` and`out_weight` are assigned based on `match_indices` and `negative_indices`. Assumed that the row offset for each instance in `input` is called lod, this operator assigns classification/regression targets by performing the following steps: 1. Assigning all outpts based on `match_indices`: If id = match_indices[i][j] > 0, out[i][j][0 : K] = X[lod[i] + id][j % P][0 : K] out_weight[i][j] = 1. Otherwise, out[j][j][0 : K] = {mismatch_value, mismatch_value, ...} out_weight[i][j] = 0. 2. Assigning out_weight based on `neg_indices` if `neg_indices` is provided: Assumed that the row offset for each instance in `neg_indices` is called neg_lod, for i-th instance and each `id` of neg_indices in this instance: out[i][id][0 : K] = {mismatch_value, mismatch_value, ...} out_weight[i][id] = 1.0 Args: inputs (Variable): This input is a 3D LoDTensor with shape [M, P, K]. matched_indices (Variable): Tensor), The input matched indices is 2D Tenosr with shape [N, P], If MatchIndices[i][j] is -1, the j-th entity of column is not matched to any entity of row in i-th instance. negative_indices (Variable): The input negative example indices are an optional input with shape [Neg, 1] and int32 type, where Neg is the total number of negative example indices. mismatch_value (float32): Fill this value to the mismatched location. Returns: out (Variable): The output is a 3D Tensor with shape [N, P, K], N and P is the same as they are in `neg_indices`, K is the same as it in input of X. If `match_indices[i][j]`. out_weight (Variable): The weight for output with the shape of [N, P, 1]. """ helper = LayerHelper('target_assign', **locals()) out = helper.create_tmp_variable(dtype=input.dtype) out_weight = helper.create_tmp_variable(dtype='float32') helper.append_op( type='target_assign', inputs={ 'X': input, 'MatchIndices': matched_indices, 'NegIndices': negative_indices }, outputs={'Out': out, 'OutWeight': out_weight}, attrs={'mismatch_value': mismatch_value}) return out, out_weight def ssd_loss(location, confidence, gt_box, gt_label, prior_box, prior_box_var=None, background_label=0, overlap_threshold=0.5, neg_pos_ratio=3.0, neg_overlap=0.5, loc_loss_weight=1.0, conf_loss_weight=1.0, match_type='per_prediction', mining_type='max_negative', normalize=True, sample_size=None): """ **Multi-box loss layer for object dection algorithm of SSD** This layer is to compute dection loss for SSD given the location offset predictions, confidence predictions, prior boxes and ground-truth boudding boxes and labels, and the type of hard example mining. The returned loss is a weighted sum of the localization loss (or regression loss) and confidence loss (or classification loss) by performing the following steps: 1. Find matched boundding box by bipartite matching algorithm. 1.1 Compute IOU similarity between ground-truth boxes and prior boxes. 1.2 Compute matched boundding box by bipartite matching algorithm. 2. Compute confidence for mining hard examples 2.1. Get the target label based on matched indices. 2.2. Compute confidence loss. 3. Apply hard example mining to get the negative example indices and update the matched indices. 4. Assign classification and regression targets 4.1. Encoded bbox according to the prior boxes. 4.2. Assign regression targets. 4.3. Assign classification targets. 5. Compute the overall objective loss. 5.1 Compute confidence loss. 5.1 Compute localization loss. 5.3 Compute the overall weighted loss. Args: location (Variable): The location predictions are a 3D Tensor with shape [N, Np, 4], N is the batch size, Np is total number of predictions for each instance. 4 is the number of coordinate values, the layout is [xmin, ymin, xmax, ymax]. confidence (Variable): The confidence predictions are a 3D Tensor with shape [N, Np, C], N and Np are the same as they are in `location`, C is the class number. gt_box (Variable): The ground-truth boudding boxes (bboxes) are a 2D LoDTensor with shape [Ng, 4], Ng is the total number of ground-truth bboxes of mini-batch input. gt_label (Variable): The ground-truth labels are a 2D LoDTensor with shape [Ng, 1]. prior_box (Variable): The prior boxes are a 2D Tensor with shape [Np, 4]. prior_box_var (Variable): The variance of prior boxes are a 2D Tensor with shape [Np, 4]. background_label (int): The index of background label, 0 by default. overlap_threshold (float): If match_type is 'per_prediction', use `overlap_threshold` to determine the extra matching bboxes when finding matched boxes. 0.5 by default. neg_pos_ratio (float): The ratio of the negative boxes to the positive boxes, used only when mining_type is 'max_negative', 3.0 by defalut. neg_overlap (float): The negative overlap upper bound for the unmatched predictions. Use only when mining_type is 'max_negative', 0.5 by default. loc_loss_weight (float): Weight for localization loss, 1.0 by default. conf_loss_weight (float): Weight for confidence loss, 1.0 by default. match_type (str): The type of matching method during training, should be 'bipartite' or 'per_prediction', 'per_prediction' by defalut. mining_type (str): The hard example mining type, should be 'hard_example' or 'max_negative', now only support `max_negative`. normalize (bool): Whether to normalize the SSD loss by the total number of output locations, True by defalut. sample_size (int): The max sample size of negative box, used only when mining_type is 'hard_example'. Returns: Variable: The weighted sum of the localization loss and confidence loss, with shape [N * Np, 1], N and Np are the same as they are in `location`. Raises: ValueError: If mining_type is 'hard_example', now only support mining type of `max_negative`. Examples: .. code-block:: python pb = layers.data( name='prior_box', shape=[10, 4], append_batch_size=False, dtype='float32') pbv = layers.data( name='prior_box_var', shape=[10, 4], append_batch_size=False, dtype='float32') loc = layers.data(name='target_box', shape=[10, 4], dtype='float32') scores = layers.data(name='scores', shape=[10, 21], dtype='float32') gt_box = layers.data( name='gt_box', shape=[4], lod_level=1, dtype='float32') gt_label = layers.data( name='gt_label', shape=[1], lod_level=1, dtype='float32') loss = layers.ssd_loss(loc, scores, gt_box, gt_label, pb, pbv) """ helper = LayerHelper('ssd_loss', **locals()) if mining_type != 'max_negative': raise ValueError("Only support mining_type == max_negative now.") num, num_prior, num_class = confidence.shape def __reshape_to_2d(var): return ops.reshape(x=var, shape=[-1, var.shape[-1]]) # 1. Find matched boundding box by prior box. # 1.1 Compute IOU similarity between ground-truth boxes and prior boxes. iou = iou_similarity(x=gt_box, y=prior_box) # 1.2 Compute matched boundding box by bipartite matching algorithm. matched_indices, matched_dist = bipartite_match(iou, match_type, overlap_threshold) # 2. Compute confidence for mining hard examples # 2.1. Get the target label based on matched indices gt_label = ops.reshape(x=gt_label, shape=gt_label.shape + (1, )) target_label, _ = target_assign( gt_label, matched_indices, mismatch_value=background_label) # 2.2. Compute confidence loss. # Reshape confidence to 2D tensor. confidence = __reshape_to_2d(confidence) target_label = tensor.cast(x=target_label, dtype='int64') target_label = __reshape_to_2d(target_label) conf_loss = nn.softmax_with_cross_entropy(confidence, target_label) # 3. Mining hard examples conf_loss = ops.reshape(x=conf_loss, shape=(num, num_prior)) neg_indices = helper.create_tmp_variable(dtype='int32') dtype = matched_indices.dtype updated_matched_indices = helper.create_tmp_variable(dtype=dtype) helper.append_op( type='mine_hard_examples', inputs={ 'ClsLoss': conf_loss, 'LocLoss': None, 'MatchIndices': matched_indices, 'MatchDist': matched_dist, }, outputs={ 'NegIndices': neg_indices, 'UpdatedMatchIndices': updated_matched_indices }, attrs={ 'neg_pos_ratio': neg_pos_ratio, 'neg_dist_threshold': neg_pos_ratio, 'mining_type': mining_type, 'sample_size': sample_size, }) # 4. Assign classification and regression targets # 4.1. Encoded bbox according to the prior boxes. encoded_bbox = box_coder( prior_box=prior_box, prior_box_var=prior_box_var, target_box=gt_box, code_type='encode_center_size') # 4.2. Assign regression targets target_bbox, target_loc_weight = target_assign( encoded_bbox, updated_matched_indices, mismatch_value=background_label) # 4.3. Assign classification targets target_label, target_conf_weight = target_assign( gt_label, updated_matched_indices, negative_indices=neg_indices, mismatch_value=background_label) # 5. Compute loss. # 5.1 Compute confidence loss. target_label = __reshape_to_2d(target_label) target_label = tensor.cast(x=target_label, dtype='int64') conf_loss = nn.softmax_with_cross_entropy(confidence, target_label) target_conf_weight = __reshape_to_2d(target_conf_weight) conf_loss = conf_loss * target_conf_weight # the target_label and target_conf_weight do not have gradient. target_label.stop_gradient = True target_conf_weight.stop_gradient = True # 5.2 Compute regression loss. location = __reshape_to_2d(location) target_bbox = __reshape_to_2d(target_bbox) loc_loss = nn.smooth_l1(location, target_bbox) target_loc_weight = __reshape_to_2d(target_loc_weight) loc_loss = loc_loss * target_loc_weight # the target_bbox and target_loc_weight do not have gradient. target_bbox.stop_gradient = True target_loc_weight.stop_gradient = True # 5.3 Compute overall weighted loss. loss = conf_loss_weight * conf_loss + loc_loss_weight * loc_loss # reshape to [N, Np], N is the batch size and Np is the prior box number. loss = ops.reshape(x=loss, shape=[-1, num_prior]) loss = nn.reduce_sum(loss, dim=1, keep_dim=True) if normalize: normalizer = nn.reduce_sum(target_loc_weight) loss = loss / normalizer return loss def multi_box_head(inputs, image, base_size, num_classes, aspect_ratios, min_ratio, max_ratio, min_sizes=None, max_sizes=None, steps=None, step_w=None, step_h=None, offset=0.5, variance=[0.1, 0.1, 0.1, 0.1], flip=False, clip=False, kernel_size=1, pad=0, stride=1, name=None): """ **Prior_boxes** Generate prior boxes for SSD(Single Shot MultiBox Detector) algorithm. The details of this algorithm, please refer the section 2.2 of SSD paper (SSD: Single Shot MultiBox Detector) `_ . Args: inputs(list|tuple): The list of input Variables, the format of all Variables is NCHW. image(Variable): The input image data of PriorBoxOp, the layout is NCHW. base_size(int): the base_size is used to get min_size and max_size according to min_ratio and max_ratio. num_classes(int): The number of classes. aspect_ratios(list|tuple): the aspect ratios of generated prior boxes. The length of input and aspect_ratios must be equal. min_ratio(int): the min ratio of generated prior boxes. max_ratio(int): the max ratio of generated prior boxes. min_sizes(list|tuple|None): If `len(inputs) <=2`, min_sizes must be set up, and the length of min_sizes should equal to the length of inputs. Default: None. max_sizes(list|tuple|None): If `len(inputs) <=2`, max_sizes must be set up, and the length of min_sizes should equal to the length of inputs. Default: None. steps(list|tuple): If step_w and step_h are the same, step_w and step_h can be replaced by steps. step_w(list|tuple): Prior boxes step across width. If step_w[i] == 0.0, the prior boxes step across width of the inputs[i] will be automatically calculated. Default: None. step_h(list|tuple): Prior boxes step across height, If step_h[i] == 0.0, the prior boxes step across height of the inputs[i] will be automatically calculated. Default: None. offset(float): Prior boxes center offset. Default: 0.5 variance(list|tuple): the variances to be encoded in prior boxes. Default:[0.1, 0.1, 0.1, 0.1]. flip(bool): Whether to flip aspect ratios. Default:False. clip(bool): Whether to clip out-of-boundary boxes. Default: False. kernel_size(int): The kernel size of conv2d. Default: 1. pad(int|list|tuple): The padding of conv2d. Default:0. stride(int|list|tuple): The stride of conv2d. Default:1, name(str): Name of the prior box layer. Default: None. Returns: mbox_loc(Variable): The predicted boxes' location of the inputs. The layout is [N, H*W*Priors, 4]. where Priors is the number of predicted boxes each position of each input. mbox_conf(Variable): The predicted boxes' confidence of the inputs. The layout is [N, H*W*Priors, C]. where Priors is the number of predicted boxes each position of each input and C is the number of Classes. boxes(Variable): the output prior boxes of PriorBox. The layout is [num_priors, 4]. num_priors is the total box count of each position of inputs. Variances(Variable): the expanded variances of PriorBox. The layout is [num_priors, 4]. num_priors is the total box count of each position of inputs Examples: .. code-block:: python mbox_locs, mbox_confs, box, var = layers.multi_box_head( inputs=[conv1, conv2, conv3, conv4, conv5, conv5], image=images, num_classes=21, min_ratio=20, max_ratio=90, aspect_ratios=[[2.], [2., 3.], [2., 3.], [2., 3.], [2.], [2.]], base_size=300, offset=0.5, flip=True, clip=True) """ def _prior_box_(input, image, min_sizes, max_sizes, aspect_ratios, variance, flip=False, clip=False, step_w=0.0, step_h=0.0, offset=0.5, name=None): helper = LayerHelper("prior_box", **locals()) dtype = helper.input_dtype() box = helper.create_tmp_variable(dtype) var = helper.create_tmp_variable(dtype) helper.append_op( type="prior_box", inputs={"Input": input, "Image": image}, outputs={"Boxes": box, "Variances": var}, attrs={ 'min_sizes': min_sizes, 'max_sizes': max_sizes, 'aspect_ratios': aspect_ratios, 'variances': variance, 'flip': flip, 'clip': clip, 'step_w': step_w, 'step_h': step_h, 'offset': offset }) return box, var def _reshape_with_axis_(input, axis=1): if not (axis > 0 and axis < len(input.shape)): raise ValueError("The axis should be smaller than " "the arity of input and bigger than 0.") new_shape = [ -1, reduce(lambda x, y: x * y, input.shape[axis:len(input.shape)]) ] out = ops.reshape(x=input, shape=new_shape) return out def _is_list_or_tuple_(data): return (isinstance(data, list) or isinstance(data, tuple)) def _is_list_or_tuple_and_equal(data, length, err_info): if not (_is_list_or_tuple_(data) and len(data) == length): raise ValueError(err_info) if not _is_list_or_tuple_(inputs): raise ValueError('inputs should be a list or tuple.') num_layer = len(inputs) if num_layer <= 2: assert min_sizes is not None and max_sizes is not None assert len(min_sizes) == num_layer and len(max_sizes) == num_layer else: min_sizes = [] max_sizes = [] step = int(math.floor(((max_ratio - min_ratio)) / (num_layer - 2))) for ratio in xrange(min_ratio, max_ratio + 1, step): min_sizes.append(base_size * ratio / 100.) max_sizes.append(base_size * (ratio + step) / 100.) min_sizes = [base_size * .10] + min_sizes max_sizes = [base_size * .20] + max_sizes if aspect_ratios: _is_list_or_tuple_and_equal( aspect_ratios, num_layer, 'aspect_ratios should be list or tuple, and the length of inputs ' 'and aspect_ratios should be the same.') if step_h: _is_list_or_tuple_and_equal( step_h, num_layer, 'step_h should be list or tuple, and the length of inputs and ' 'step_h should be the same.') if step_w: _is_list_or_tuple_and_equal( step_w, num_layer, 'step_w should be list or tuple, and the length of inputs and ' 'step_w should be the same.') if steps: _is_list_or_tuple_and_equal( steps, num_layer, 'steps should be list or tuple, and the length of inputs and ' 'step_w should be the same.') step_w = steps step_h = steps mbox_locs = [] mbox_confs = [] box_results = [] var_results = [] for i, input in enumerate(inputs): min_size = min_sizes[i] max_size = max_sizes[i] if not _is_list_or_tuple_(min_size): min_size = [min_size] if not _is_list_or_tuple_(max_size): max_size = [max_size] if not (len(max_size) == len(min_size)): raise ValueError( 'the length of max_size and min_size should be equal.') aspect_ratio = [] if aspect_ratios is not None: aspect_ratio = aspect_ratios[i] if not _is_list_or_tuple_(aspect_ratio): aspect_ratio = [aspect_ratio] box, var = _prior_box_(input, image, min_size, max_size, aspect_ratio, variance, flip, clip, step_w[i] if step_w else 0.0, step_h[i] if step_w else 0.0, offset) box_results.append(box) var_results.append(var) num_boxes = box.shape[2] # get box_loc num_loc_output = num_boxes * 4 mbox_loc = nn.conv2d( input=input, num_filters=num_loc_output, filter_size=kernel_size, padding=pad, stride=stride) mbox_loc = nn.transpose(mbox_loc, perm=[0, 2, 3, 1]) new_shape = [ mbox_loc.shape[0], mbox_loc.shape[1] * mbox_loc.shape[2] * mbox_loc.shape[3] / 4, 4 ] mbox_loc_flatten = ops.reshape(mbox_loc, shape=new_shape) mbox_locs.append(mbox_loc_flatten) # get conf_loc num_conf_output = num_boxes * num_classes conf_loc = nn.conv2d( input=input, num_filters=num_conf_output, filter_size=kernel_size, padding=pad, stride=stride) conf_loc = nn.transpose(conf_loc, perm=[0, 2, 3, 1]) new_shape = [ conf_loc.shape[0], conf_loc.shape[1] * conf_loc.shape[2] * conf_loc.shape[3] / num_classes, num_classes ] conf_loc_flatten = ops.reshape(conf_loc, shape=new_shape) mbox_confs.append(conf_loc_flatten) if len(box_results) == 1: box = box_results[0] var = var_results[0] mbox_locs_concat = mbox_locs[0] mbox_confs_concat = mbox_confs[0] else: reshaped_boxes = [] reshaped_vars = [] for i in range(len(box_results)): reshaped_boxes.append(_reshape_with_axis_(box_results[i], axis=3)) reshaped_vars.append(_reshape_with_axis_(var_results[i], axis=3)) box = tensor.concat(reshaped_boxes) var = tensor.concat(reshaped_vars) mbox_locs_concat = tensor.concat(mbox_locs, axis=1) mbox_confs_concat = tensor.concat(mbox_confs, axis=1) return mbox_locs_concat, mbox_confs_concat, box, var