diff --git a/documentation20/en/04.model/docs.md b/documentation20/en/04.model/docs.md index 5875c66a213619bf028dd9c41894cfdeeda35c74..5ab5e0c6a56d0b5d534386752988cb1adae3b2fa 100644 --- a/documentation20/en/04.model/docs.md +++ b/documentation20/en/04.model/docs.md @@ -1,370 +1,74 @@ -# Data Model and Architecture +# Data Modeling -## ## Data Model +TDengine adopts a relational data model, so we need to build the "database" and "table". Therefore, for a specific application scenario, it is necessary to consider the design of the database, STable and ordinary table. This section does not discuss detailed syntax rules, but only concepts. -### ### A Typical IoT Scenario +Please watch the [video tutorial](https://www.taosdata.com/blog/2020/11/11/1945.html) for data modeling. -In typical IoT, Internet of Vehicles and Operation Monitoring scenarios, there are often many different types of data collecting devices that collect one or more different physical metrics. However, for the collection devices of the same type, there are often many specific collection devices distributed in places. BigData processing system aims to collect all kinds of data, and then calculate and analyze them. For the same kind of devices, the data collected are very regular. Taking smart meters as an example, assuming that each smart meter collects three metrics of current, voltage and phase, the collected data are similar to the following table: +## Create a Database -| | | | | | | | -| ------------- | -------------- | ----------- | ----------- | --------- | ---------------- | ----------- | -| **Device ID** | **Time Stamp** | **current** | **voltage** | **phase** | **location** | **groupId** | -| d1001 | 1538548685000 | 10.3 | 219 | 0.31 | Beijing.Chaoyang | 2 | -| d1002 | 1538548684000 | 10.2 | 220 | 0.23 | Beijing.Chaoyang | 3 | -| d1003 | 1538548686500 | 11.5 | 221 | 0.35 | Beijing.Haidian | 3 | -| d1004 | 1538548685500 | 13.4 | 223 | 0.29 | Beijing.Haidian | 2 | -| d1001 | 1538548695000 | 12.6 | 218 | 0.33 | Beijing.Chaoyang | 2 | -| d1004 | 1538548696600 | 11.8 | 221 | 0.28 | Beijing.Haidian | 2 | -| d1002 | 1538548696650 | 10.3 | 218 | 0.25 | Beijing.Chaoyang | 3 | -| d1001 | 1538548696800 | 12.3 | 221 | 0.31 | Beijing.Chaoyang | 2 | +Different types of data collection points often have different data characteristics, including frequency of data collecting, length of data retention time, number of replicas, size of data blocks, whether to update data or not, and so on. To ensure TDengine working with great efficiency in various scenarios, TDengine suggests creating tables with different data characteristics in different databases, because each database can be configured with different storage strategies. When creating a database, in addition to SQL standard options, the application can also specify a variety of parameters such as retention duration, number of replicas, number of memory blocks, time accuracy, max and min number of records in a file block, whether it is compressed or not, and number of days a data file will be overwritten. For example: +```mysql +CREATE DATABASE power KEEP 365 DAYS 10 BLOCKS 4 UPDATE 1; +``` +The above statement will create a database named “power”. The data of this database will be kept for 365 days (it will be automatically deleted 365 days later), one data file created per 10 days, and the number of memory blocks is 4 for data updating. For detailed syntax and parameters, please refer to [Data Management section of TAOS SQL](https://www.taosdata.com/en/documentation/taos-sql#management). -| **Device ID** | **Time Stamp** | **Collected Metrics** | **Tags** | | | | -| ------------- | -------------- | --------------------- | ----------- | --------- | ---------------- | ----------- | -| **Device ID** | **Time Stamp** | **current** | **voltage** | **phase** | **location** | **groupId** | -| d1001 | 1538548685000 | 10.3 | 219 | 0.31 | Beijing.Chaoyang | 2 | -| d1002 | 1538548684000 | 10.2 | 220 | 0.23 | Beijing.Chaoyang | 3 | -| d1003 | 1538548686500 | 11.5 | 221 | 0.35 | Beijing.Haidian | 3 | -| d1004 | 1538548685500 | 13.4 | 223 | 0.29 | Beijing.Haidian | 2 | -| d1001 | 1538548695000 | 12.6 | 218 | 0.33 | Beijing.Chaoyang | 2 | -| d1004 | 1538548696600 | 11.8 | 221 | 0.28 | Beijing.Haidian | 2 | -| d1002 | 1538548696650 | 10.3 | 218 | 0.25 | Beijing.Chaoyang | 3 | -| d1001 | 1538548696800 | 12.3 | 221 | 0.31 | Beijing.Chaoyang | 2 | +After the database created, please use SQL command USE to switch to the new database, for example: -Table 1: Smart meter example data +```mysql +USE power; +``` -Each data record contains the device ID, timestamp, collected metrics (current, voltage, phase as above), and static tags (Location and groupId in Table 1) associated with the devices. Each device generates a data record in a pre-defined timer or triggered by an external event. It is a sequence of data points like a stream. +Replace the database operating in the current connection with “power”, otherwise, before operating on a specific table, you need to use "database name. table name" to specify the name of database to use. -### Data Characteristics +**Note:** -As the data points are a series of data points over time, the data points generated by IoT, Internet of Vehicles, and Operation Monitoring have some strong common characteristics: +- Any table or STable belongs to a database. Before creating a table, a database must be created first. +- Tables in two different databases cannot be JOIN. -1. Metrics are always structured data; -2. There are rarely delete/update operations on collected data; -3. No need for transactions of traditional databases -4. The ratio of reading is lower but write is higher than typical Internet applications; -5. data flow is uniform and can be predicted according to the number of devices and collection frequency; -6. the user pays attention to the trend of data, not a specific value at a specific time; -7. there is always a data retention policy; -8. the data query is always executed in a given time range and a subset of space; -9. in addition to storage and query operations, various statistical and real-time calculation operations are also required; -10. data volume is huge, a system may generate over 10 billion data points in a day. +## Create a STable -By utilizing the above characteristics, TDengine designs the storage and computing engine in a special and optimized way for time-series data, resulting in massive improvements in system efficiency. +An IoT system often has many types of devices, such as smart meters, transformers, buses, switches, etc. for power grids. In order to facilitate aggregation among multiple tables, using TDengine, it is necessary to create a STable for each type of data collection point. Taking the smart meter in Table 1 as an example, you can use the following SQL command to create a STable: -### Relational Database Model +```mysql +CREATE STABLE meters (ts timestamp, current float, voltage int, phase float) TAGS (location binary(64), groupdId int); +``` -Since time-series data is most likely to be structured data, TDengine adopts the traditional relational database model to process them with a shallow learning curve. You need to create a database, create tables with schema definitions, then insert data points and execute queries to explore the data. Standard SQL is used, instead of NoSQL’s key-value storage. +**Note:** The STABLE keyword in this instruction needs to be written as TABLE in versions before 2.0.15. -### One Table for One Collection Point +Just like creating an ordinary table, you need to provide the table name (‘meters’ in the example) and the table structure Schema, that is, the definition of data columns. The first column must be a timestamp (‘ts’ in the example), the other columns are the physical metrics collected (current, volume, phase in the example), and the data types can be int, float, string, etc. In addition, you need to provide the schema of the tag (location, groupId in the example), and the data types of the tag can be int, float, string and so on. Static attributes of collection points can often be used as tags, such as geographic location of collection points, device model, device group ID, administrator ID, etc. The schema of the tag can be added, deleted and modified afterwards. Please refer to the [STable Management section of TAOS SQL](https://www.taosdata.com/cn/documentation/taos-sql#super-table) for specific definitions and details. -To utilize this time-series and other data features, TDengine requires the user to create a table for each collection point to store collected time-series data. For example, if there are over 10 millions smart meters, means 10 millions tables shall be created. For the table above, 4 tables shall be created for devices D1001, D1002, D1003, and D1004 to store the data collected. This design has several advantages: +Each type of data collection point needs an established STable, so an IoT system often has multiple STables. For the power grid, we need to build a STable for smart meters, transformers, buses, switches, etc. For IoT, a device may have multiple data collection points (for example, a fan for wind-driven generator, some collection points capture parameters such as current and voltage, and some capture environmental parameters such as temperature, humidity and wind direction). In this case, multiple STables need to be established for corresponding types of devices. All collected physical metrics contained in one and the same STable must be collected at the same time (with a consistent timestamp). -1. Guarantee that all data from a collection point can be saved in a continuous memory/hard disk space block by block. If queries are applied only on one point in a time range, this design will reduce the random read latency significantly, thus increase read and query speed by orders of magnitude. -2. Since the data generation process of each collection device is completely independent, means each device has its unique data source, thus writes can be carried out in a lock-free manner to greatly improve the speed. -3. Write latency can be significantly reduced too as the data points generated by the same device will arrive in time order, the new data point will be simply appended to a block. +A STable allows up to 1024 columns. If the number of physical metrics collected at a collection point exceeds 1024, multiple STables need to be built to process them. A system can have multiple DBs, and a DB can have one or more STables. -If the data of multiple devices are written into a table in the traditional way, due to the uncontrollable network delay, the timing of the data from different devices arriving at the server cannot be guaranteed, the writing operation must be protected by locks, and the data of one device cannot be guaranteed to continuously stored together. **The method of one table for each data collection point can ensure the optimal performance of insertion and query of a single data collection point to the greatest extent.** +## Create a Table -TDengine suggests using collection point ID as the table name (like D1001 in the above table). Each point may collect one or more metrics (like the current, voltage, phase as above). Each metric has a column in the table. The data type for a column can be int, float, string and others. In addition, the first column in the table must be a timestamp. TDengine uses the time stamp as the index, and won’t build the index on any metrics stored. All data will be stored in columns. +TDengine builds a table independently for each data collection point. Similar to standard relational data, one table has a table name, Schema, but in addition, it can also carry one or more tags. When creating, you need to use the STable as a template and specify the specific value of the tag. Taking the smart meter in Table 1 as an example, the following SQL command can be used to build the table: -### STable: A Collection of Data Points in the Same Type +```mysql +CREATE TABLE d1001 USING meters TAGS ("Beijing.Chaoyang", 2); +``` -The method of one table for each point will bring a greatly increasing number of tables, which is difficult to manage. Moreover, applications often need to take aggregation operations between collection points, thus aggregation operations will become complicated. To support aggregation over multiple tables efficiently, the [STable(Super Table)](https://www.taosdata.com/en/documentation/super-table) concept is introduced by TDengine. +Where d1001 is the table name, meters is the name of the STable, followed by the specific tag value of tag Location as "Beijing.Chaoyang", and the specific tag value of tag groupId 2. Although the tag value needs to be specified when creating the table, it can be modified afterwards. Please refer to the [Table Management section of TAOS SQL](https://www.taosdata.com/en/documentation/taos-sql#table) for details. -STable is an abstract collection for a type of data point. A STable contains a set of points (tables) that have the same schema or data structure, but with different static attributes (tags). To describe a STable (a combination of data collection points of a specific type), in addition to defining the table structure of the collected metrics, it is also necessary to define the schema of its tag. The data type of tags can be int, float, string, and there can be multiple tags, which can be added, deleted, or modified afterward. If the whole system has N different types of data collection points, N STables need to be established. +**Note: ** At present, TDengine does not technically restrict the use of a STable of a database (dbA) as a template to create a sub-table of another database (dbB). This usage will be prohibited later, and it is not recommended to use this method to create a table. -In the design of TDengine, **a table is used to represent a specific data collection point, and STable is used to represent a set of data collection points of the same type**. When creating a table for a specific data collection point, the user uses the definition of STable as a template and specifies the tag value of the specific collection point (table). Compared with the traditional relational database, the table (a data collection point) has static tags, and these tags can be added, deleted, and modified afterward. **A STable contains multiple tables with the same time-series data schema but different tag values.** +TDengine suggests to use the globally unique ID of data collection point as a table name (such as device serial number). However, in some scenarios, there is no unique ID, and multiple IDs can be combined into a unique ID. It is not recommended to use a unique ID as tag value. -When aggregating multiple data collection points with the same data type, TDEngine will first find out the tables that meet the tag filters from the STables, and then scan the time-series data of these tables to perform aggregation operation, which can greatly reduce the data sets to be scanned, thus greatly improving the performance of aggregation calculation. +**Automatic table creating** : In some special scenarios, user is not sure whether the table of a certain data collection point exists when writing data. In this case, the non-existent table can be created by using automatic table building syntax when writing data. If the table already exists, no new table will be created. For example: -## Cluster and Primary Logic Unit +```mysql +INSERT INTO d1001 USING METERS TAGS ("Beijng.Chaoyang", 2) VALUES (now, 10.2, 219, 0.32); +``` -The design of TDengine is based on the assumption that one single hardware or software system is unreliable and that no single computer can provide sufficient computing and storage resources to process massive data. Therefore, TDengine has been designed according to a distributed and high-reliability architecture since Day One of R&D, which supports scale-out, so that hardware failure or software failure of any single or multiple servers will not affect the availability and reliability of the system. At the same time, through node virtualization and automatic load-balancing technology, TDengine can make the most efficient use of computing and storage resources in heterogeneous clusters to reduce hardware investment. +The SQL statement above inserts records (now, 10.2, 219, 0.32) into table d1001. If table d1001 has not been created yet, the STable meters is used as the template to automatically create it, and the tag value "Beijing.Chaoyang", 2 is marked at the same time. -### Primary Logic Unit +For detailed syntax of automatic table building, please refer to the "[Automatic Table Creation When Inserting Records](https://www.taosdata.com/en/documentation/taos-sql#auto_create_table)" section. -Logical structure diagram of TDengine distributed architecture as following: +## Multi-column Model vs Single-column Model -Figure 1: TDengine architecture diagram +TDengine supports multi-column model. As long as physical metrics are collected simultaneously by a data collection point (with a consistent timestamp), these metrics can be placed in a STable as different columns. However, there is also an extreme design, a single-column model, in which each collected physical metric is set up separately, so each type of physical metrics is set up separately with a STable. For example, create 3 Stables, one each for current, voltage and phase. -A complete TDengine system runs on one or more physical nodes. Logically, it includes data node (dnode), TDEngine application driver (taosc) and application (app). There are one or more data nodes in the system, which form a cluster. The application interacts with the TDengine cluster through taosc's API. The following is a brief introduction to each logical unit. - -**Physical node (pnode)**: A pnode is a computer that runs independently and has its own computing, storage and network capabilities. It can be a physical machine, virtual machine or Docker container installed with OS. The physical node is identified by its configured FQDN (Fully Qualified Domain Name). TDengine relies entirely on FQDN for network communication. If you don't know about FQDN, please read the blog post "[All about FQDN of TDengine](https://www.taosdata.com/blog/2020/09/11/1824.html)". - -**Data node (dnode):** A dnode is a running instance of the TDengine server-side execution code taosd on a physical node. A working system must have at least one data node. A dnode contains zero to multiple logical virtual nodes (VNODE), zero or at most one logical management node (mnode). The unique identification of a dnode in the system is determined by the instance's End Point (EP). EP is a combination of FQDN (Fully Qualified Domain Name) of the physical node where the dnode is located and the network port number (Port) configured by the system. By configuring different ports, a physical node (a physical machine, virtual machine or container) can run multiple instances or have multiple data nodes. - -**Virtual node (vnode)**: In order to better support data sharding, load balancing and prevent data from overheating or skewing, data nodes are virtualized into multiple virtual nodes (vnode, V2, V3, V4, etc. in the figure). Each vnode is a relatively independent work unit, which is the basic unit of time-series data storage, and has independent running threads, memory space and persistent storage path. A vnode contains a certain number of tables (data collection points). When a new table is created, the system checks whether a new vnode needs to be created. The number of vnodes that can be created on a data node depends on the hardware capacities of the physical node where the data node is located. A vnode belongs to only one DB, but a DB can have multiple vnodes. In addition to the stored time-series data, a vnode also stores the schema and tag values of the included tables. A virtual node is uniquely identified in the system by the EP of the data node and the VGroup ID to which it belongs, and is created and managed by the management node. - -**Management node (mnode)**: A virtual logical unit responsible for monitoring and maintaining the running status of all data nodes and load balancing among nodes (M in figure). At the same time, the management node is also responsible for the storage and management of metadata (including users, databases, tables, static tags, etc.), so it is also called Meta Node. Multiple (up to 5) mnodes can be configured in a TDengine cluster, and they are automatically constructed into a virtual management node group (M0, M1, M2 in the figure). The master/slave mechanism is used to manage between mnodes, and the data synchronization is carried out in a strong consistent way. Any data update operation can only be done on the master. The creation of mnode cluster is completed automatically by the system without manual intervention. There is at most one mnode on each dnode, which is uniquely identified by the EP of the data node to which it belongs. Each dnode automatically obtains the EP of the dnode where all mnodes in the whole cluster are located through internal messaging interaction. - -**Virtual node group (VGroup)**: Vnodes on different data nodes can form a virtual node group to ensure the high reliability of the system. The virtual node group is managed in a master/slave structure. Write operations can only be performed on the master vnode, and the system synchronizes data to the slave vnode via replication, thus ensuring that one single replica of data is copied on multiple physical nodes. The number of virtual nodes in a vgroup equals the number of data replicas. If the number of replicas of a DB is N, the system must have at least N data nodes. The number of replicas can be specified by the parameter replica when creating DB, and the default is 1. Using the multi-replica feature of TDengine, the same high data reliability can be done without the need for expensive storage devices such as disk arrays. Virtual node group is created and managed by management node, and the management node assigns a system unique ID, aka VGroup ID. If two virtual nodes has the same vnode group ID, means that they belong to the same group and the data is backed up to each other. The number of virtual nodes in a virtual node group can be dynamically changed, allowing only one, that is, no data replication. VGroup ID is never changed. Even if a virtual node group is deleted, its ID will not be reused. - -**TAOSC**: TAOSC is the driver provided by TDengine to applications, which is responsible for dealing with the interface interaction between application and cluster, and provides the native interface of C/C + + language, which is embedded in JDBC, C #, Python, Go, Node.js language connection libraries. Applications interact with the whole cluster through taosc instead of directly connecting to data nodes in the cluster. This module is responsible for obtaining and caching metadata; forwarding requests for insertion, query, etc. to the correct data node; when returning the results to the application, taosc also need to be responsible for the final level of aggregation, sorting, filtering and other operations. For JDBC, C/C + +/C #/Python/Go/Node.js interfaces, this module runs on the physical node where the application is located. At the same time, in order to support the fully distributed RESTful interface, taosc has a running instance on each dnode of TDengine cluster. - -### Node Communication - -**Communication mode**: The communication among each data node of TDengine system, and among application driver and each data node is carried out through TCP/UDP. Considering an IoT scenario, the data writing packets are generally not large, so TDengine uses UDP in addition to TCP for transmission, because UDP is more efficient and is not limited by the number of connections. TDengine implements its own timeout, retransmission, confirmation and other mechanisms to ensure reliable transmission of UDP. For packets with a data volume of less than 15K, UDP is adopted for transmission, and TCP is automatically adopted for transmission of packets with a data volume of more than 15K or query operations. At the same time, TDengine will automatically compress/decompress the data, digital sign/authenticate the data according to the configuration and data packet. For data replication among data nodes, only TCP is used for data transmission. - -**FQDN configuration:** A data node has one or more FQDNs, which can be specified in the system configuration file taos.cfg with the parameter "fqdn". If it is not specified, the system will automatically use the hostname of the computer as its FQDN. If the node is not configured with FQDN, you can directly set the configuration parameter fqdn of the node to its IP address. However, IP is not recommended because IP address is variable, and once it changes, the cluster will not work properly. The EP (End Point) of a data node consists of FQDN + Port. With FQDN, it is necessary to ensure the normal operation of DNS service, or configure hosts files on nodes and the nodes where applications are located. - -**Port configuration**: The external port of a data node is determined by the system configuration parameter serverPort in TDengine, and the port for internal communication of cluster is serverPort+5. The data replication operation among data nodes in the cluster also occupies a TCP port, which is serverPort+10. In order to support multithreading and efficient processing of UDP data, each internal and external UDP connection needs to occupy 5 consecutive ports. Therefore, the total port range of a data node will be serverPort to serverPort + 10, for a total of 11 TCP/UDP ports. When using, make sure that the firewall keeps these ports open. Each data node can be configured with a different serverPort. - -**Cluster external connection**: TDengine cluster can accommodate one single, multiple or even thousands of data nodes. The application only needs to initiate a connection to any data node in the cluster. The network parameter required for connection is the End Point (FQDN plus configured port number) of a data node. When starting the application taos through CLI, the FQDN of the data node can be specified through the option-h, and the configured port number can be specified through -p. If the port is not configured, the system configuration parameter serverPort of TDengine will be adopted. - -**Inter-cluster communication**: Data nodes connect with each other through TCP/UDP. When a data node starts, it will obtain the EP information of the dnode where the mnode is located, and then establish a connection with the mnode in the system to exchange information. There are three steps to obtain EP information of the mnode: 1. Check whether the mnodeEpList file exists, if it does not exist or cannot be opened normally to obtain EP information of the mnode, skip to the second step; 2: Check the system configuration file taos.cfg to obtain node configuration parameters firstEp and secondEp (the node specified by these two parameters can be a normal node without mnode, in this case, the node will try to redirect to the mnode node when connected). If these two configuration parameters do not exist or do not exist in taos.cfg, or are invalid, skip to the third step; 3: Set your own EP as a mnode EP and run it independently. After obtaining the mnode EP list, the data node initiates the connection. It will successfully join the working cluster after connected. If not successful, it will try the next item in the mnode EP list. If all attempts are made, but the connection still fails, sleep for a few seconds before trying again. - -**The choice of MNODE**: TDengine logically has a management node, but there is no separated execution code. The server side only has a set of execution code taosd. So which data node will be the management node? This is determined automatically by the system without any manual intervention. The principle is as follows: when a data node starts, it will check its End Point and compare it with the obtained mnode EP List. If its EP exists in it, the data node shall start the mnode module and become a mnode. If your own EP is not in the mnode EP List, the mnode module will not start. During the system operation, due to load balancing, downtime and other reasons, mnode may migrate to the new dnode, while totally transparent without manual intervention. The modification of configuration parameters is the decision made by mnode itself according to resources usage. - -**Add new data nodes:** After the system has a data node, it has become a working system. There are two steps to add a new node into the cluster. Step1: Connect to the existing working data node using TDengine CLI, and then add the End Point of the new data node with the command "create dnode"; Step 2: In the system configuration parameter file taos.cfg of the new data node, set the firstEp and secondEp parameters to the EP of any two data nodes in the existing cluster. Please refer to the detailed user tutorial for detailed steps. In this way, the cluster will be established step by step. - -**Redirection**: No matter about dnode or taosc, the connection to the mnode shall be initiated first, but the mnode is automatically created and maintained by the system, so user does not know which dnode is running the mnode. TDengine only requires a connection to any working dnode in the system. Because any running dnode maintains the currently running mnode EP List, when receiving a connecting request from the newly started dnode or taosc, if it’s not an mnode by self, it will reply the mnode EP List back. After receiving this list, taosc or the newly started dnode will try to establish the connection again. When the mnode EP List changes, each data node quickly obtains the latest list and notifies taosc through messaging interaction among nodes. - -### A Typical Messaging Process - -To explain the relationship between vnode, mnode, taosc and application and their respective roles, the following is an analysis of a typical data writing process. - -Figure 2: A typical process of TDengine - -1. Application initiates a request to insert data through JDBC, ODBC, or other APIs. -2. Cache be checked by taosc that if meta data existing for the table. If so, go straight to Step 4. If not, taosc sends a get meta-data request to mnode. -3. Mnode returns the meta-data of the table to taosc. Meta-data contains the schema of the table, and also the vgroup information to which the table belongs (the vnode ID and the End Point of the dnode where the table belongs. If the number of replicas is N, there will be N groups of End Points). If taosc does not receive a response from the mnode for a long time, and there are multiple mnodes, taosc will send a request to the next mnode. -4. Taosc initiates an insert request to master vnode. -5. After vnode inserts the data, it gives a reply to taosc, indicating that the insertion is successful. If taosc doesn't get a response from vnode for a long time, taosc will judge the node as offline. In this case, if there are multiple replicas of the inserted database, taosc will issue an insert request to the next vnode in vgroup. -6. Taosc notifies APP that writing is successful. - -For Step 2 and 3, when taosc starts, it does not know the End Point of mnode, so it will directly initiate a request to the externally serving End Point of the configured cluster. If the dnode that received the request does not have an mnode configured, it will inform the mnode EP list in a reply message, so that taosc will re-issue a request to obtain meta-data to the EP of another new mnode. - -For Step 4 and 5, without caching, taosc can't recognize the master in the virtual node group, so assumes that the first vnodeID is the master and send a request to it. If the requested vnode is not the master, it will reply the actual master as a new target taosc makes a request to. Once the reply of successful insertion is obtained, taosc will cache the information of master node. - -The above is the process of inserting data, and the processes of querying and calculating are completely consistent. Taosc encapsulates and shields all these complicated processes, and has no perception and no special treatment for applications. - -Through taosc caching mechanism, mnode needs to be accessed only when a table is operated for the first time, so mnode will not become a system bottleneck. However, because schema and vgroup may change (such as load balancing), taosc will interact with mnode regularly to automatically update the cache. - -## Storage Model and Data Partitioning/Sharding - -### Storage Model - -The data stored by TDengine include collected time-series data, metadata related to libraries and tables, tag data, etc. These data are specifically divided into three parts: - -- Time-series data: stored in vnode and composed of data, head and last files. The amount of data is large and query amount depends on the application scenario. Out-of-order writing is allowed, but delete operation is not supported for the time being, and update operation is only allowed when update parameter is set to 1. By adopting the model with one table for each collection point, the data of a given time period is continuously stored, and the writing against one single table is a simple add operation. Multiple records can be read at one time, thus ensuring the insert and query operation of a single collection point with best performance. -- Tag data: meta files stored in vnode support four standard operations of add, delete, modify and check. The amount of data is not large. If there are N tables, there are N records, so all can be stored in memory. If there are many tag filtering operations, queries will be very frequent and TDengine supports multi-core and multi-threaded concurrent queries. As long as the computing resources are sufficient, even in face of millions of tables, the filtering results will return in milliseconds. -- Metadata: stored in mnode, including system node, user, DB, Table Schema and other information. Four standard operations of add, delete, modify and query are supported. The amount of these data are not large and can be stored in memory, moreover the query amount is not large because of the client cache. Therefore, TDengine uses centralized storage management, however, there will be no performance bottleneck. - -Compared with the typical NoSQL storage model, TDengine stores tag data and time-series data completely separately, which has two major advantages: - -- Greatly reduce the redundancy of tag data storage: general NoSQL database or time-series database adopts K-V storage, in which Key includes timestamp, device ID and various tags. Each record carries these duplicates, so wasting storage space. Moreover, if the application needs to add, modify or delete tags on historical data, it has to traverse the data and rewrite again, which is extremely expensive to operate. -- Realize extremely efficient aggregation query between multiple tables: when doing aggregation query between multiple tables, it firstly finds out the tag filtered tables, and then find out the corresponding data blocks of these tables to greatly reduce the data sets to be scanned, thus greatly improving the query efficiency. Moreover, tag data is managed and maintained in a full-memory structure, and tag data queries in tens of millions can return in milliseconds. - -### Data Sharding - -For large-scale data management, to achieve scale-out, it is generally necessary to adopt the a Partitioning strategy as Sharding. TDengine implements data sharding via vnode, and time-series data partitioning via one data file for each time range. - -VNode (Virtual Data Node) is responsible for providing writing, query and calculation functions for collected time-series data. To facilitate load balancing, data recovery and support heterogeneous environments, TDengine splits a data node into multiple vnodes according to its computing and storage resources. The management of these vnodes is done automatically by TDengine and completely transparent to the application. - -For a single data collection point, regardless of the amount of data, a vnode (or vnode group, if the number of replicas is greater than 1) has enough computing resource and storage resource to process (if a 16-byte record is generated per second, the original data generated in one year will be less than 0.5 G), so TDengine stores all the data of a table (a data collection point) in one vnode instead of distributing the data to two or more dnodes. Moreover, a vnode can store data from multiple data collection points (tables), and the upper limit of the tables’ quantity for a vnode is one million. By design, all tables in a vnode belong to the same DB. On a data node, unless specially configured, the number of vnodes owned by a DB will not exceed the number of system cores. - -When creating a DB, the system does not allocate resources immediately. However, when creating a table, the system will check if there is an allocated vnode with free tablespace. If so, the table will be created in the vacant vnode immediately. If not, the system will create a new vnode on a dnode from the cluster according to the current workload, and then a table. If there are multiple replicas of a DB, the system does not create only one vnode, but a vgroup (virtual data node group). The system has no limit on the number of vnodes, which is just limited by the computing and storage resources of physical nodes. - -The meda data of each table (including schema, tags, etc.) is also stored in vnode instead of centralized storage in mnode. In fact, this means sharding of meta data, which is convenient for efficient and parallel tag filtering operations. - -### Data Partitioning - -In addition to vnode sharding, TDengine partitions the time-series data by time range. Each data file contains only one time range of time-series data, and the length of the time range is determined by DB's configuration parameter “days”. This method of partitioning by time rang is also convenient to efficiently implement the data retention strategy. As long as the data file exceeds the specified number of days (system configuration parameter ‘keep’), it will be automatically deleted. Moreover, different time ranges can be stored in different paths and storage media, so as to facilitate the cold/hot management of big data and realize tiered-storage. - -In general, **TDengine splits big data by vnode and time as two dimensions**, which is convenient for parallel and efficient management with scale-out. - -### Load Balancing - -Each dnode regularly reports its status (including hard disk space, memory size, CPU, network, number of virtual nodes, etc.) to the mnode (virtual management node) for declaring the status of the entire cluster. Based on the overall state, when an mnode finds an overloaded dnode, it will migrate one or more vnodes to other dnodes. In the process, external services keep running and the data insertion, query and calculation operations are not affected. - -If the mnode has not received the dnode status for a period of time, the dnode will be judged as offline. When offline lasts a certain period of time (the duration is determined by the configuration parameter ‘offlineThreshold’), the dnode will be forcibly removed from the cluster by mnode. If the number of replicas of vnodes on this dnode is greater than one, the system will automatically create new replicas on other dnodes to ensure the replica number. If there are other mnodes on this dnode and the number of mnodes replicas is greater than one, the system will automatically create new mnodes on other dnodes to ensure t the replica number. - -When new data nodes are added to the cluster, with new computing and storage are added, the system will automatically start the load balancing process. - -The load balancing process does not require any manual intervention without application restarted. It will automatically connect new nodes with completely transparence. **Note: load balancing is controlled by parameter “balance”, which determines to turn on/off automatic load balancing.** - -## Data Writing and Replication Process - -If a database has N replicas, thus a virtual node group has N virtual nodes, but only one as Master and all others are slaves. When the application writes a new record to system, only the Master vnode can accept the writing request. If a slave vnode receives a writing request, the system will notifies taosc to redirect. - -### Master vnode Writing Process - -Master Vnode uses a writing process as follows: - -Figure 3: TDengine Master writing process - -1. Master vnode receives the application data insertion request, verifies, and to next step; -2. If the system configuration parameter “walLevel” is greater than 0, vnode will write the original request packet into database log file WAL. If walLevel is set to 2 and fsync is set to 0, TDengine will make WAL data written immediately to ensure that even system goes down, all data can be recovered from database log file; -3. If there are multiple replicas, vnode will forward data packet to slave vnodes in the same virtual node group, and the forwarded packet has a version number with data; -4. Write into memory and add the record to “skip list”; -5. Master vnode returns a confirmation message to the application, indicating a successful writing. -6. If any of Step 2, 3 or 4 fails, the error will directly return to the application. - -### Slave vnode Writing Process - -For a slave vnode, the write process as follows: - -Fiture 4: TDengine Slave Writing Process - -1. Slave vnode receives a data insertion request forwarded by Master vnode. -2. If the system configuration parameter “walLevel” is greater than 0, vnode will write the original request packet into database log file WAL. If walLevel is set to 2 and fsync is set to 0, TDengine will make WAL data written immediately to ensure that even system goes down, all data can be recovered from database log file; -3. Write into memory and add the record to “skip list”; - -Compared with Master vnode, slave vnode has no forwarding or reply confirmation step, means two steps less. But writing into memory is exactly the same as WAL. - -### Remote Disaster Recovery and IDC Migration - -As above Master and Slave processes discussed, TDengine adopts asynchronous replication for data synchronization. This method can greatly improve the writing performance, with not obvious impact from network delay. By configuring IDC and rack number for each physical node, it can be ensured that for a virtual node group, virtual nodes are composed of physical nodes from different IDC and different racks, thus implementing remote disaster recovery without other tools. - -On the other hand, TDengine supports dynamic modification of the replicas number. Once the number of replicas increases, the newly added virtual nodes will immediately enter the data synchronization process. After synchronization completed, added virtual nodes can provide services. In the synchronization process, master and other synchronized virtual nodes keep serving. With this feature, TDengine can realize IDC room migration without service interruption. It is only necessary to add new physical nodes to the existing IDC cluster, and then remove old physical nodes after the data synchronization is completed. - -However, this asynchronous replication method has a tiny time window of written data lost. The specific scenario is as follows: - -1. Master vnode has completed its 5-step operations, confirmed the success of writing to APP, and then went down; -2. Slave vnode receives the write request, then processing fails before writing to the log in Step 2; -3. Slave vnode will become the new master, thus losing one record - -In theory, as long as in asynchronous replication, there is no guarantee for no losing. However, this window is extremely small, only if mater and slave fail at the same time, and just confirm the successful write to the application before. - -Note: Remote disaster recovery and no-downtime IDC migration are only supported by Enterprise Edition. **Hint: This function is not available yet** - -### Master/slave Selection - -Vnode maintains a Version number. When memory data is persisted, the version number will also be persisted. For each data update operation, whether it is collecting time-series data or metadata, this version number will be increased by one. - -When a vnode starts, the roles (master, slave) are uncertain, and the data is in an unsynchronized state. It’s necessary to establish TCP connections with other nodes in the virtual node group and exchange status, including version and its own roles. Through the exchange, the system implements a master-selection process. The rules are as follows: - -1. If there’s only one replica, it’s always master -2. When all replicas are online, the one with latest version is master -3. Over half of online nodes are virtual nodes, and some virtual node is slave, it will automatically become master -4. For 2 and 3, if multiple virtual nodes meet the requirement, the first vnode in virtual node group list will be selected as master - -See [TDengine 2.0 Data Replication Module Design](https://www.taosdata.com/cn/documentation/architecture/replica/) for more information on the data replication process. - -### Synchronous Replication - -For scenarios with higher data consistency requirements, asynchronous data replication is not applicable, because there is some small probability of data loss. So, TDengine provides a synchronous replication mechanism for users. When creating a database, in addition to specifying the number of replicas, user also needs to specify a new parameter “quorum”. If quorum is greater than one, it means that every time the Master forwards a message to the replica, it needs to wait for “quorum-1” reply confirms before informing the application that data has been successfully written in slave. If “quorum-1” reply confirms are not received within a certain period of time, the master vnode will return an error to the application. - -With synchronous replication, performance of system will decrease and latency will increase. Because metadata needs strong consistent, the default for data synchronization between mnodes is synchronous replication. - -Note: synchronous replication between vnodes is only supported in Enterprise Edition - -## Caching and Persistence - -### Caching - -TDengine adopts a time-driven cache management strategy (First-In-First-Out, FIFO), also known as a Write-driven Cache Management Mechanism. This strategy is different from the read-driven data caching mode (Least-Recent-Used, LRU), which directly put the most recently written data in the system buffer. When the buffer reaches a threshold, the earliest data are written to disk in batches. Generally speaking, for the use of IoT data, users are most concerned about the newly generated data, that is, the current status. TDengine takes full advantage of this feature to put the most recently arrived (current state) data in the buffer. - -TDengine provides millisecond-level data collecting capability to users through query functions. Putting the recently arrived data directly in the buffer can respond to users' analysis query for the latest piece or batch of data more quickly, and provide faster database query response capability as a whole. In this sense, **TDengine can be used as a data buffer by setting appropriate configuration parameters without deploying Redis or other additional cache systems**, which can effectively simplify the system architecture and reduce the operation costs. It should be noted that after the TDengine is restarted, the buffer of the system will be emptied, the previously cached data will be written to disk in batches, and the previously cached data will not be reloaded into the buffer as so in a proprietary key-value cache system. - -Each vnode has its own independent memory, and it is composed of multiple memory blocks of fixed size, and different vnodes are completely isolated. When writing data, similar to the writing of logs, data is sequentially added to memory, but each vnode maintains its own skip list for quick search. When more than one third of the memory block are used, the disk writing operation will start, and the subsequent writing operation is carried out in a new memory block. By this design, one third of the memory blocks in a vnode keep the latest data, so as to achieve the purpose of caching and quick search. The number of memory blocks of a vnode is determined by the configuration parameter “blocks”, and the size of memory blocks is determined by the configuration parameter “cache”. - -### Persistent Storage - -TDengine uses a data-driven method to write the data from buffer into hard disk for persistent storage. When the cached data in vnode reaches a certain volume, TDengine will also pull up the disk-writing thread to write the cached data into persistent storage in order not to block subsequent data writing. TDengine will open a new database log file when the data is written, and delete the old database log file after written successfully to avoid unlimited log growth. - -To make full use of the characteristics of time-series data, TDengine splits the data stored in persistent storage by a vnode into multiple files, each file only saves data for a fixed number of days, which is determined by the system configuration parameter “days”. By so, for the given start and end date of a query, you can locate the data files to open immediately without any index, thus greatly speeding up reading operations. - -For collected data, there is generally a retention period, which is determined by the system configuration parameter “keep”. Data files exceeding this set number of days will be automatically deleted by the system to free up storage space. - -Given “days” and “keep” parameters, the total number of data files in a vnode is: keep/days. The total number of data files should not be too large or too small. 10 to 100 is appropriate. Based on this principle, reasonable days can be set. In the current version, parameter “keep” can be modified, but parameter “days” cannot be modified once it is set. - -In each data file, the data of a table is stored by blocks. A table can have one or more data file blocks. In a file block, data is stored in columns, occupying a continuous storage space, thus greatly improving the reading speed. The size of file block is determined by the system parameter “maxRows” (the maximum number of records per block), and the default value is 4096. This value should not be too large or too small. If it is too large, the data locating in search will cost longer; if too small, the index of data block is too large, and the compression efficiency will be low with slower reading speed. - -Each data file (with a .data postfix) has a corresponding index file (with a .head postfix). The index file has summary information of a data block for each table, recording the offset of each data block in the data file, start and end time of data and other information, so as to lead system quickly locate the data to be found. Each data file also has a corresponding last file (with a .last postfix), which is designed to prevent data block fragmentation when written in disk. If the number of written records from a table does not reach the system configuration parameter “minRows” (minimum number of records per block), it will be stored in the last file first. When write to disk next time, the newly written records will be merged with the records in last file and then written into data file. - -When data is written to disk, it is decided whether to compress the data according to system configuration parameter “comp”. TDengine provides three compression options: no compression, one-stage compression and two-stage compression, corresponding to comp values of 0, 1 and 2 respectively. One-stage compression is carried out according to the type of data. Compression algorithms include delta-delta coding, simple 8B method, zig-zag coding, LZ4 and other algorithms. Two-stage compression is based on one-stage compression and compressed by general compression algorithm, which has higher compression ratio. - -### Tiered Storage - -By default, TDengine saves all data in /var/lib/taos directory, and the data files of each vnode are saved in a different directory under this directory. In order to expand the storage space, minimize the bottleneck of file reading and improve the data throughput rate, TDengine can configure the system parameter “dataDir” to allow multiple mounted hard disks to be used by system at the same time. In addition, TDengine also provides the function of tiered data storage, i.e. storage on different storage media according to the time stamps of data files. For example, the latest data is stored on SSD, the data for more than one week is stored on local hard disk, and the data for more than four weeks is stored on network storage device, thus reducing the storage cost and ensuring efficient data access. The movement of data on different storage media is automatically done by the system and completely transparent to applications. Tiered storage of data is also configured through the system parameter “dataDir”. - - - -dataDir format is as follows: - -1. dataDir data_path [tier_level] - -Where data_path is the folder path of mount point and tier_level is the media storage-tier. The higher the media storage-tier, means the older the data file. Multiple hard disks can be mounted at the same storage-tier, and data files on the same storage-tier are distributed on all hard disks within the tier. TDengine supports up to 3 tiers of storage, so tier_level values are 0, 1, and 2. When configuring dataDir, there must be only one mount path without specifying tier_level, which is called special mount disk (path). The mount path defaults to level 0 storage media and contains special file links, which cannot be removed, otherwise it will have a devastating impact on the written data. - - - -Suppose a physical node with six mountable hard disks/mnt/disk1,/mnt/disk2, …,/mnt/disk6, where disk1 and disk2 need to be designated as level 0 storage media, disk3 and disk4 are level 1 storage media, and disk5 and disk6 are level 2 storage media. Disk1 is a special mount disk, you can configure it in/etc/taos/taos.cfg as follows: - - - -1. dataDir /mnt/disk1/taos -2. dataDir /mnt/disk2/taos 0 -3. dataDir /mnt/disk3/taos 1 -4. dataDir /mnt/disk4/taos 1 -5. dataDir /mnt/disk5/taos 2 -6. dataDir /mnt/disk6/taos 2 - - - -Mounted disks can also be a non-local network disk, as long as the system can access it. - - - -Note: Tiered Storage is only supported in Enterprise Edition - -## Data Query - -TDengine provides a variety of query processing functions for tables and STables. In addition to common aggregation queries, TDengine also provides window queries and statistical aggregation functions for time-series data. The query processing of TDengine needs the collaboration of client, vnode and mnode. - -### Single Table Query - -The parsing and verification of SQL statements are completed on the client side. SQL statements are parsed and generate an Abstract Syntax Tree (AST), which is then checksummed. Then request metadata information (table metadata) for the table specified in the query from management node (mnode). - -According to the End Point information in metadata information, the query request is serialized and sent to the data node (dnode) where the table is located. After receiving the query, the dnode identifies the virtual node (vnode) pointed to and forwards the message to the query execution queue of the vnode. The query execution thread of vnode establishes the basic query execution environment, immediately returns the query request and starts executing the query at the same time. - -When client obtains query result, the worker thread in query execution queue of dnode will wait for the execution of vnode execution thread to complete before returning the query result to the requesting client. - -### Aggregation by Time Axis, Downsampling, Interpolation - -The remarkable feature that time-series data is different from ordinary data is that each record has a timestamp, so aggregating data with timestamps on the time axis is an important and unique function from common databases. From this point of view, it is similar to the window query of stream computing engine. - -The keyword “interval” is introduced into TDengine to split fixed length time windows on time axis, and the data are aggregated according to time windows, and the data within window range are aggregated as needed. For example: - - - -1. select count(*) from d1001 interval(1h); - - - -According to the data collected by device D1001, the number of records stored per hour is returned by a 1-hour time window. - - - -In application scenarios where query results need to be obtained continuously, if there is data missing in a given time interval, the data results in this interval will also be lost. TDengine provides a strategy to interpolate the results of timeline aggregation calculation. The results of time axis aggregation can be interpolated by using keyword Fill. For example: - - - -1. select count(*) from d1001 interval(1h) fill(prev); - - - -According to the data collected by device D1001, the number of records per hour is counted. If there is no data in a certain hour, statistical data of the previous hour is returned. TDengine provides forward interpolation (prev), linear interpolation (linear), NULL value populating (NULL), and specific value populating (value). - -### Multi-table Aggregation Query - -TDengine creates a separate table for each data collection point, but in practical applications, it is often necessary to aggregate data from different collection points. In order to perform aggregation operations efficiently, TDengine introduces the concept of STable. STable is used to represent a specific type of data collection point. It is a table set containing multiple tables. The schema of each table in the set is completely consistent, but each table has its own static tag. The tags can be multiple and be added, deleted and modified at any time. Applications can aggregate or statistically operate all or a subset of tables under a STABLE by specifying tag filters, thus greatly simplifying the development of applications. The process is shown in the following figure: - - - -Figure 5: Diagram of multi-table aggregation query - -1. Application sends a query condition to system; -2. taosc sends the STable name to Meta Node(management node); -3. Management node sends the vnode list owned by the STable back to taosc; -4. taosc sends the computing request together with tag filters to multiple data nodes corresponding to these vnodes; -5. Each vnode first finds out the set of tables within its own node that meet the tag filters from memory, then scans the stored time-series data, completes corresponding aggregation calculations, and returns result to taosc; -6. taosc finally aggregates the results returned by multiple data nodes and send them back to application. - -Since TDengine stores tag data and time-series data separately in vnode, by filtering tag data in memory, the set of tables that need to participate in aggregation operation is first found, which greatly reduces the volume of data scanned and improves aggregation calculation speed. At the same time, because the data is distributed in multiple vnodes/dnodes, the aggregation calculation operation is carried out concurrently in multiple vnodes, which further improves the aggregation speed. Aggregation functions for ordinary tables and most operations are applicable to STables. The syntax is exactly the same. Please see TAOS SQL for details. - -### Precomputation - -In order to effectively improve the performance of query processing, based-on the unchangeable feature of IoT data, statistical information of data stored in data block is recorded in the head of data block, including max value, min value, and sum. We call it a precomputing unit. If the query processing involves all the data of a whole data block, the pre-calculated results are directly used, and no need to read the data block contents at all. Since the amount of pre-calculated data is much smaller than the actual size of data block stored on disk, for query processing with disk IO as bottleneck, the use of pre-calculated results can greatly reduce the pressure of reading IO and accelerate the query process. The precomputation mechanism is similar to the index BRIN (Block Range Index) of PostgreSQL. \ No newline at end of file +TDengine recommends using multi-column model as much as possible because of higher insertion and storage efficiency. However, for some scenarios, types of collected metrics often change. In this case, if multi-column model is adopted, the structure definition of STable needs to be frequently modified so make the application complicated. To avoid that, single-column model is recommended.