[PATCH] libata: regularize dma_start/stop arguments

Needed for a few PATA drivers.

Also fix up a wrong comment.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

drivers/scsi/libata-core.c

@@ -3017,7 +3017,7 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
 		host_stat = ap->ops->bmdma_status(ap);
 
 		/* before we do anything else, clear DMA-Start bit */
-		ap->ops->bmdma_stop(ap);
+		ap->ops->bmdma_stop(qc);
 
 		/* fall through */
 
@@ -3399,7 +3399,7 @@ static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc)
 }
 
 /**
- *	ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ *	ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
  *
  *	LOCKING:
@@ -3570,7 +3570,7 @@ u8 ata_bmdma_status(struct ata_port *ap)
 
 /**
  *	ata_bmdma_stop - Stop PCI IDE BMDMA transfer
- *	@ap: Port associated with this ATA transaction.
+ *	@qc: Command we are ending DMA for
  *
  *	Clears the ATA_DMA_START flag in the dma control register
  *
@@ -3580,8 +3580,9 @@ u8 ata_bmdma_status(struct ata_port *ap)
  *	spin_lock_irqsave(host_set lock)
  */
 
-void ata_bmdma_stop(struct ata_port *ap)
+void ata_bmdma_stop(struct ata_queued_cmd *qc)
 {
+	struct ata_port *ap = qc->ap;
 	if (ap->flags & ATA_FLAG_MMIO) {
 		void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr;
 
@@ -3633,7 +3634,7 @@ inline unsigned int ata_host_intr (struct ata_port *ap,
 			goto idle_irq;
 
 		/* before we do anything else, clear DMA-Start bit */
-		ap->ops->bmdma_stop(ap);
+		ap->ops->bmdma_stop(qc);
 
 		/* fall through */
 

drivers/scsi/sata_qstor.c

@@ -117,7 +117,7 @@ static void qs_phy_reset(struct ata_port *ap);
 static void qs_qc_prep(struct ata_queued_cmd *qc);
 static int qs_qc_issue(struct ata_queued_cmd *qc);
 static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
-static void qs_bmdma_stop(struct ata_port *ap);
+static void qs_bmdma_stop(struct ata_queued_cmd *qc);
 static u8 qs_bmdma_status(struct ata_port *ap);
 static void qs_irq_clear(struct ata_port *ap);
 static void qs_eng_timeout(struct ata_port *ap);
@@ -198,7 +198,7 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 1;	/* ATAPI DMA not supported */
 }
 
-static void qs_bmdma_stop(struct ata_port *ap)
+static void qs_bmdma_stop(struct ata_queud_cmd *qc)
 {
 	/* nothing */
 }

include/linux/libata.h

@@ -365,7 +365,7 @@ struct ata_port_operations {
 
 	void (*host_stop) (struct ata_host_set *host_set);
 
-	void (*bmdma_stop) (struct ata_port *ap);
+	void (*bmdma_stop) (struct ata_queued_cmd *qc);
 	u8   (*bmdma_status) (struct ata_port *ap);
 };
 
@@ -424,9 +424,10 @@ extern unsigned int ata_dev_classify(struct ata_taskfile *tf);
 extern void ata_dev_id_string(u16 *id, unsigned char *s,
 			      unsigned int ofs, unsigned int len);
 extern void ata_dev_config(struct ata_port *ap, unsigned int i);
+extern void ata_dev_set_protocol(struct ata_device *dev);
 extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
 extern void ata_bmdma_start (struct ata_queued_cmd *qc);
-extern void ata_bmdma_stop(struct ata_port *ap);
+extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
 extern u8   ata_bmdma_status(struct ata_port *ap);
 extern void ata_bmdma_irq_clear(struct ata_port *ap);
 extern void ata_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat);