提交 28dce7c7 编写于 作者: L Linus Torvalds

Merge tag 'arc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC architecture updates from Vineet Gupta:
 "ARC updates for 4.3:

   - perf support for ARCv2 based cores (sampling interrupt, SMP)
   - leftovers for ARCv2 support
   - futex fixes"

* tag 'arc-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARCv2: entry: Fix reserved handler
  ARCv2: perf: Finally introduce HS perf unit
  ARCv2: perf: SMP support
  ARCv2: perf: implement exclusion of event counting in user or kernel mode
  ARCv2: perf: Support sampling events using overflow interrupts
  ARCv2: perf: implement "event_set_period"
  ARC: perf: cap the number of counters to hardware max of 32
  ARC: Eliminate some ARCv2 specific code for ARCompact build
  ARC: add/fix some comments in code - no functional change
  ARC: change some branchs to jumps to resolve linkage errors
  ARC: ensure futex ops are atomic in !LLSC config
  ARC: Enable HAVE_FUTEX_CMPXCHG
  ARC: make futex_atomic_cmpxchg_inatomic() return bimodal
  ARC: futex cosmetics
  ARC: add barriers to futex code
  ARCv2: IOC: Allow boot time disable
  ARCv2: SLC: Allow boot time disable
  ARCv2: Support IO Coherency and permutations involving L1 and L2 caches
  ARC: Enable optimistic spinning for LLSC config
  MAINTAINERS: add git tree for the arc architecture
* ARC HS Performance Counters
The ARC HS can be configured with a pipeline performance monitor for counting
CPU and cache events like cache misses and hits. Like conventional PCT there
are 100+ hardware conditions dynamically mapped to upto 32 counters.
It also supports overflow interrupts.
Required properties:
- compatible : should contain
"snps,archs-pct"
Example:
pmu {
compatible = "snps,archs-pct";
};
......@@ -9911,8 +9911,9 @@ SYNOPSYS ARC ARCHITECTURE
M: Vineet Gupta <vgupta@synopsys.com>
S: Supported
F: arch/arc/
F: Documentation/devicetree/bindings/arc/
F: Documentation/devicetree/bindings/arc/*
F: drivers/tty/serial/arc_uart.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
SYNOPSYS ARC SDP platform support
M: Alexey Brodkin <abrodkin@synopsys.com>
......
......@@ -8,6 +8,7 @@
config ARC
def_bool y
select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC
select BUILDTIME_EXTABLE_SORT
select COMMON_CLK
select CLONE_BACKWARDS
......@@ -22,6 +23,7 @@ config ARC
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
select HAVE_FUTEX_CMPXCHG
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_KRETPROBES
......
......@@ -72,12 +72,13 @@
};
/*
* This INTC is actually connected to DW APB GPIO
* which acts as a wire between MB INTC and CPU INTC.
* GPIO INTC is configured in platform init code
* and here we mimic direct connection from MB INTC to
* CPU INTC, thus we set "interrupts = <7>" instead of
* "interrupts = <12>"
* The DW APB ICTL intc on MB is connected to CPU intc via a
* DT "invisible" DW APB GPIO block, configured to simply pass thru
* interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c)
*
* So here we mimic a direct connection betwen them, ignoring the
* ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core)
* instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO)
*
* This intc actually resides on MB, but we move it here to
* avoid duplicating the MB dtsi file given that IRQ from
......
......@@ -35,6 +35,7 @@
#define ARC_REG_RTT_BCR 0xF2
#define ARC_REG_IRQ_BCR 0xF3
#define ARC_REG_SMART_BCR 0xFF
#define ARC_REG_CLUSTER_BCR 0xcf
/* status32 Bits Positions */
#define STATUS_AE_BIT 5 /* Exception active */
......
......@@ -53,6 +53,8 @@ extern void arc_cache_init(void);
extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
extern void read_decode_cache_bcr(void);
extern int ioc_exists;
#endif /* !__ASSEMBLY__ */
/* Instruction cache related Auxiliary registers */
......@@ -94,4 +96,10 @@ extern void read_decode_cache_bcr(void);
#define SLC_CTRL_BUSY 0x100
#define SLC_CTRL_RGN_OP_INV 0x200
/* IO coherency related Auxiliary registers */
#define ARC_REG_IO_COH_ENABLE 0x500
#define ARC_REG_IO_COH_PARTIAL 0x501
#define ARC_REG_IO_COH_AP0_BASE 0x508
#define ARC_REG_IO_COH_AP0_SIZE 0x509
#endif /* _ASM_CACHE_H */
......@@ -110,18 +110,18 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
sizeof(*(ptr))))
/*
* On ARC700, EX insn is inherently atomic, so by default "vanilla" xchg() need
* not require any locking. However there's a quirk.
* ARC lacks native CMPXCHG, thus emulated (see above), using external locking -
* incidently it "reuses" the same atomic_ops_lock used by atomic APIs.
* Now, llist code uses cmpxchg() and xchg() on same data, so xchg() needs to
* abide by same serializing rules, thus ends up using atomic_ops_lock as well.
* xchg() maps directly to ARC EX instruction which guarantees atomicity.
* However in !LLSC config, it also needs to be use @atomic_ops_lock spinlock
* due to a subtle reason:
* - For !LLSC, cmpxchg() needs to use that lock (see above) and there is lot
* of kernel code which calls xchg()/cmpxchg() on same data (see llist.h)
* Hence xchg() needs to follow same locking rules.
*
* This however is only relevant if SMP and/or ARC lacks LLSC
* if (UP or LLSC)
* xchg doesn't need serialization
* else <==> !(UP or LLSC) <==> (!UP and !LLSC) <==> (SMP and !LLSC)
* xchg needs serialization
* Technically the lock is also needed for UP (boils down to irq save/restore)
* but we can cheat a bit since cmpxchg() atomic_ops_lock() would cause irqs to
* be disabled thus can't possibly be interrpted/preempted/clobbered by xchg()
* Other way around, xchg is one instruction anyways, so can't be interrupted
* as such
*/
#if !defined(CONFIG_ARC_HAS_LLSC) && defined(CONFIG_SMP)
......
......@@ -20,6 +20,7 @@
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
smp_mb(); \
__asm__ __volatile__( \
"1: llock %1, [%2] \n" \
insn "\n" \
......@@ -30,7 +31,7 @@
" .section .fixup,\"ax\" \n" \
" .align 4 \n" \
"4: mov %0, %4 \n" \
" b 3b \n" \
" j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .align 4 \n" \
......@@ -40,12 +41,14 @@
\
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
: "cc", "memory")
: "cc", "memory"); \
smp_mb() \
#else /* !CONFIG_ARC_HAS_LLSC */
#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)\
\
smp_mb(); \
__asm__ __volatile__( \
"1: ld %1, [%2] \n" \
insn "\n" \
......@@ -55,7 +58,7 @@
" .section .fixup,\"ax\" \n" \
" .align 4 \n" \
"4: mov %0, %4 \n" \
" b 3b \n" \
" j 3b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .align 4 \n" \
......@@ -65,7 +68,8 @@
\
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "ir" (-EFAULT) \
: "cc", "memory")
: "cc", "memory"); \
smp_mb() \
#endif
......@@ -83,6 +87,9 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
#ifndef CONFIG_ARC_HAS_LLSC
preempt_disable(); /* to guarantee atomic r-m-w of futex op */
#endif
pagefault_disable();
switch (op) {
......@@ -90,6 +97,7 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
__futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
/* oldval = *uaddr; *uaddr += oparg ; ret = *uaddr */
__futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
......@@ -106,6 +114,9 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
}
pagefault_enable();
#ifndef CONFIG_ARC_HAS_LLSC
preempt_enable();
#endif
if (!ret) {
switch (cmp) {
......@@ -134,54 +145,57 @@ static inline int futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
return ret;
}
/* Compare-xchg with pagefaults disabled.
* Notes:
* -Best-Effort: Exchg happens only if compare succeeds.
* If compare fails, returns; leaving retry/looping to upper layers
* -successful cmp-xchg: return orig value in @addr (same as cmp val)
* -Compare fails: return orig value in @addr
* -user access r/w fails: return -EFAULT
/*
* cmpxchg of futex (pagefaults disabled by caller)
* Return 0 for success, -EFAULT otherwise
*/
static inline int
futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 expval,
u32 newval)
{
u32 val;
int ret = 0;
u32 existval;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32)))
return -EFAULT;
pagefault_disable();
#ifndef CONFIG_ARC_HAS_LLSC
preempt_disable(); /* to guarantee atomic r-m-w of futex op */
#endif
smp_mb();
__asm__ __volatile__(
#ifdef CONFIG_ARC_HAS_LLSC
"1: llock %0, [%3] \n"
" brne %0, %1, 3f \n"
"2: scond %2, [%3] \n"
"1: llock %1, [%4] \n"
" brne %1, %2, 3f \n"
"2: scond %3, [%4] \n"
" bnz 1b \n"
#else
"1: ld %0, [%3] \n"
" brne %0, %1, 3f \n"
"2: st %2, [%3] \n"
"1: ld %1, [%4] \n"
" brne %1, %2, 3f \n"
"2: st %3, [%4] \n"
#endif
"3: \n"
" .section .fixup,\"ax\" \n"
"4: mov %0, %4 \n"
" b 3b \n"
"4: mov %0, %5 \n"
" j 3b \n"
" .previous \n"
" .section __ex_table,\"a\" \n"
" .align 4 \n"
" .word 1b, 4b \n"
" .word 2b, 4b \n"
" .previous\n"
: "=&r"(val)
: "r"(oldval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
: "+&r"(ret), "=&r"(existval)
: "r"(expval), "r"(newval), "r"(uaddr), "ir"(-EFAULT)
: "cc", "memory");
pagefault_enable();
smp_mb();
*uval = val;
return val;
#ifndef CONFIG_ARC_HAS_LLSC
preempt_enable();
#endif
*uval = existval;
return ret;
}
#endif
/*
* Linux performance counter support for ARC
*
* Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2011-2013 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
......@@ -12,8 +13,8 @@
#ifndef __ASM_PERF_EVENT_H
#define __ASM_PERF_EVENT_H
/* real maximum varies per CPU, this is the maximum supported by the driver */
#define ARC_PMU_MAX_HWEVENTS 64
/* Max number of counters that PCT block may ever have */
#define ARC_PERF_MAX_COUNTERS 32
#define ARC_REG_CC_BUILD 0xF6
#define ARC_REG_CC_INDEX 0x240
......@@ -28,15 +29,22 @@
#define ARC_REG_PCT_CONFIG 0x254
#define ARC_REG_PCT_CONTROL 0x255
#define ARC_REG_PCT_INDEX 0x256
#define ARC_REG_PCT_INT_CNTL 0x25C
#define ARC_REG_PCT_INT_CNTH 0x25D
#define ARC_REG_PCT_INT_CTRL 0x25E
#define ARC_REG_PCT_INT_ACT 0x25F
#define ARC_REG_PCT_CONFIG_USER (1 << 18) /* count in user mode */
#define ARC_REG_PCT_CONFIG_KERN (1 << 19) /* count in kernel mode */
#define ARC_REG_PCT_CONTROL_CC (1 << 16) /* clear counts */
#define ARC_REG_PCT_CONTROL_SN (1 << 17) /* snapshot */
struct arc_reg_pct_build {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int m:8, c:8, r:6, s:2, v:8;
unsigned int m:8, c:8, r:5, i:1, s:2, v:8;
#else
unsigned int v:8, s:2, r:6, c:8, m:8;
unsigned int v:8, s:2, i:1, r:5, c:8, m:8;
#endif
};
......@@ -95,10 +103,13 @@ static const char * const arc_pmu_ev_hw_map[] = {
/* counts condition */
[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp",
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */
[PERF_COUNT_ARC_BPOK] = "bpok", /* NP-NT, PT-T, PNT-NT */
#ifdef CONFIG_ISA_ARCV2
[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
#else
[PERF_COUNT_HW_BRANCH_MISSES] = "bpfail", /* NP-T, PT-NT, PNT-T */
#endif
[PERF_COUNT_ARC_LDC] = "imemrdc", /* Instr: mem read cached */
[PERF_COUNT_ARC_STC] = "imemwrc", /* Instr: mem write cached */
......
......@@ -57,13 +57,8 @@ VECTOR handle_interrupt ; (23) End of fixed IRQs
.section .text, "ax",@progbits
res_service: ; processor restart
flag 0x1 ; not implemented
nop
nop
reserved: ; processor restart
rtie ; jump to processor initializations
reserved:
flag 1 ; Unexpected event, halt
;##################### Interrupt Handling ##############################
......
......@@ -42,7 +42,7 @@ ENTRY(ret_from_fork)
; when the forked child comes here from the __switch_to function
; r0 has the last task pointer.
; put last task in scheduler queue
bl @schedule_tail
jl @schedule_tail
ld r9, [sp, PT_status32]
brne r9, 0, 1f
......@@ -320,7 +320,7 @@ resume_user_mode_begin:
; --- (Slow Path #1) task preemption ---
bbit0 r9, TIF_NEED_RESCHED, .Lchk_pend_signals
mov blink, resume_user_mode_begin ; tail-call to U mode ret chks
b @schedule ; BTST+Bnz causes relo error in link
j @schedule ; BTST+Bnz causes relo error in link
.Lchk_pend_signals:
IRQ_ENABLE r10
......@@ -381,7 +381,7 @@ resume_kernel_mode:
bbit0 r9, TIF_NEED_RESCHED, .Lrestore_regs
; Invoke PREEMPTION
bl preempt_schedule_irq
jl preempt_schedule_irq
; preempt_schedule_irq() always returns with IRQ disabled
#endif
......
/*
* Linux performance counter support for ARC700 series
*
* Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com)
* Copyright (C) 2013-2015 Synopsys, Inc. (www.synopsys.com)
*
* This code is inspired by the perf support of various other architectures.
*
......@@ -11,6 +11,7 @@
*
*/
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/perf_event.h>
......@@ -20,12 +21,25 @@
struct arc_pmu {
struct pmu pmu;
int counter_size; /* in bits */
unsigned int irq;
int n_counters;
unsigned long used_mask[BITS_TO_LONGS(ARC_PMU_MAX_HWEVENTS)];
u64 max_period;
int ev_hw_idx[PERF_COUNT_ARC_HW_MAX];
};
struct arc_pmu_cpu {
/*
* A 1 bit for an index indicates that the counter is being used for
* an event. A 0 means that the counter can be used.
*/
unsigned long used_mask[BITS_TO_LONGS(ARC_PERF_MAX_COUNTERS)];
/*
* The events that are active on the PMU for the given index.
*/
struct perf_event *act_counter[ARC_PERF_MAX_COUNTERS];
};
struct arc_callchain_trace {
int depth;
void *perf_stuff;
......@@ -65,6 +79,7 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
}
static struct arc_pmu *arc_pmu;
static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu);
/* read counter #idx; note that counter# != event# on ARC! */
static uint64_t arc_pmu_read_counter(int idx)
......@@ -88,18 +103,15 @@ static uint64_t arc_pmu_read_counter(int idx)
static void arc_perf_event_update(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
uint64_t prev_raw_count, new_raw_count;
int64_t delta;
do {
prev_raw_count = local64_read(&hwc->prev_count);
new_raw_count = arc_pmu_read_counter(idx);
} while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
new_raw_count) != prev_raw_count);
delta = (new_raw_count - prev_raw_count) &
((1ULL << arc_pmu->counter_size) - 1ULL);
uint64_t prev_raw_count = local64_read(&hwc->prev_count);
uint64_t new_raw_count = arc_pmu_read_counter(idx);
int64_t delta = new_raw_count - prev_raw_count;
/*
* We don't afaraid of hwc->prev_count changing beneath our feet
* because there's no way for us to re-enter this function anytime.
*/
local64_set(&hwc->prev_count, new_raw_count);
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
}
......@@ -142,22 +154,41 @@ static int arc_pmu_event_init(struct perf_event *event)
struct hw_perf_event *hwc = &event->hw;
int ret;
if (!is_sampling_event(event)) {
hwc->sample_period = arc_pmu->max_period;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
hwc->config = 0;
if (is_isa_arcv2()) {
/* "exclude user" means "count only kernel" */
if (event->attr.exclude_user)
hwc->config |= ARC_REG_PCT_CONFIG_KERN;
/* "exclude kernel" means "count only user" */
if (event->attr.exclude_kernel)
hwc->config |= ARC_REG_PCT_CONFIG_USER;
}
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
if (event->attr.config >= PERF_COUNT_HW_MAX)
return -ENOENT;
if (arc_pmu->ev_hw_idx[event->attr.config] < 0)
return -ENOENT;
hwc->config = arc_pmu->ev_hw_idx[event->attr.config];
hwc->config |= arc_pmu->ev_hw_idx[event->attr.config];
pr_debug("init event %d with h/w %d \'%s\'\n",
(int) event->attr.config, (int) hwc->config,
arc_pmu_ev_hw_map[event->attr.config]);
return 0;
case PERF_TYPE_HW_CACHE:
ret = arc_pmu_cache_event(event->attr.config);
if (ret < 0)
return ret;
hwc->config = arc_pmu->ev_hw_idx[ret];
hwc->config |= arc_pmu->ev_hw_idx[ret];
return 0;
default:
return -ENOENT;
......@@ -180,6 +211,47 @@ static void arc_pmu_disable(struct pmu *pmu)
write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0);
}
static int arc_pmu_event_set_period(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int idx = hwc->idx;
int overflow = 0;
u64 value;
if (unlikely(left <= -period)) {
/* left underflowed by more than period. */
left = period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
overflow = 1;
} else if (unlikely(left <= 0)) {
/* left underflowed by less than period. */
left += period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
overflow = 1;
}
if (left > arc_pmu->max_period)
left = arc_pmu->max_period;
value = arc_pmu->max_period - left;
local64_set(&hwc->prev_count, value);
/* Select counter */
write_aux_reg(ARC_REG_PCT_INDEX, idx);
/* Write value */
write_aux_reg(ARC_REG_PCT_COUNTL, (u32)value);
write_aux_reg(ARC_REG_PCT_COUNTH, (value >> 32));
perf_event_update_userpage(event);
return overflow;
}
/*
* Assigns hardware counter to hardware condition.
* Note that there is no separate start/stop mechanism;
......@@ -194,13 +266,20 @@ static void arc_pmu_start(struct perf_event *event, int flags)
return;
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(event->hw.state & PERF_HES_UPTODATE));
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
event->hw.state = 0;
hwc->state = 0;
arc_pmu_event_set_period(event);
/* Enable interrupt for this counter */
if (is_sampling_event(event))
write_aux_reg(ARC_REG_PCT_INT_CTRL,
read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
/* enable ARC pmu here */
write_aux_reg(ARC_REG_PCT_INDEX, idx);
write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config);
write_aux_reg(ARC_REG_PCT_INDEX, idx); /* counter # */
write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config); /* condition */
}
static void arc_pmu_stop(struct perf_event *event, int flags)
......@@ -208,6 +287,17 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
/* Disable interrupt for this counter */
if (is_sampling_event(event)) {
/*
* Reset interrupt flag by writing of 1. This is required
* to make sure pending interrupt was not left.
*/
write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
write_aux_reg(ARC_REG_PCT_INT_CTRL,
read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~(1 << idx));
}
if (!(event->hw.state & PERF_HES_STOPPED)) {
/* stop ARC pmu here */
write_aux_reg(ARC_REG_PCT_INDEX, idx);
......@@ -227,8 +317,12 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
static void arc_pmu_del(struct perf_event *event, int flags)
{
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
arc_pmu_stop(event, PERF_EF_UPDATE);
__clear_bit(event->hw.idx, arc_pmu->used_mask);
__clear_bit(event->hw.idx, pmu_cpu->used_mask);
pmu_cpu->act_counter[event->hw.idx] = 0;
perf_event_update_userpage(event);
}
......@@ -236,20 +330,31 @@ static void arc_pmu_del(struct perf_event *event, int flags)
/* allocate hardware counter and optionally start counting */
static int arc_pmu_add(struct perf_event *event, int flags)
{
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
if (__test_and_set_bit(idx, arc_pmu->used_mask)) {
idx = find_first_zero_bit(arc_pmu->used_mask,
if (__test_and_set_bit(idx, pmu_cpu->used_mask)) {
idx = find_first_zero_bit(pmu_cpu->used_mask,
arc_pmu->n_counters);
if (idx == arc_pmu->n_counters)
return -EAGAIN;
__set_bit(idx, arc_pmu->used_mask);
__set_bit(idx, pmu_cpu->used_mask);
hwc->idx = idx;
}
write_aux_reg(ARC_REG_PCT_INDEX, idx);
pmu_cpu->act_counter[idx] = event;
if (is_sampling_event(event)) {
/* Mimic full counter overflow as other arches do */
write_aux_reg(ARC_REG_PCT_INT_CNTL, (u32)arc_pmu->max_period);
write_aux_reg(ARC_REG_PCT_INT_CNTH,
(arc_pmu->max_period >> 32));
}
write_aux_reg(ARC_REG_PCT_CONFIG, 0);
write_aux_reg(ARC_REG_PCT_COUNTL, 0);
write_aux_reg(ARC_REG_PCT_COUNTH, 0);
......@@ -264,11 +369,82 @@ static int arc_pmu_add(struct perf_event *event, int flags)
return 0;
}
#ifdef CONFIG_ISA_ARCV2
static irqreturn_t arc_pmu_intr(int irq, void *dev)
{
struct perf_sample_data data;
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
struct pt_regs *regs;
int active_ints;
int idx;
arc_pmu_disable(&arc_pmu->pmu);
active_ints = read_aux_reg(ARC_REG_PCT_INT_ACT);
regs = get_irq_regs();
for (idx = 0; idx < arc_pmu->n_counters; idx++) {
struct perf_event *event = pmu_cpu->act_counter[idx];
struct hw_perf_event *hwc;
if (!(active_ints & (1 << idx)))
continue;
/* Reset interrupt flag by writing of 1 */
write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
/*
* On reset of "interrupt active" bit corresponding
* "interrupt enable" bit gets automatically reset as well.
* Now we need to re-enable interrupt for the counter.
*/
write_aux_reg(ARC_REG_PCT_INT_CTRL,
read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
hwc = &event->hw;
WARN_ON_ONCE(hwc->idx != idx);
arc_perf_event_update(event, &event->hw, event->hw.idx);
perf_sample_data_init(&data, 0, hwc->last_period);
if (!arc_pmu_event_set_period(event))
continue;
if (perf_event_overflow(event, &data, regs))
arc_pmu_stop(event, 0);
}
arc_pmu_enable(&arc_pmu->pmu);
return IRQ_HANDLED;
}
#else
static irqreturn_t arc_pmu_intr(int irq, void *dev)
{
return IRQ_NONE;
}
#endif /* CONFIG_ISA_ARCV2 */
void arc_cpu_pmu_irq_init(void)
{
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr,
"ARC perf counters", pmu_cpu);
/* Clear all pending interrupt flags */
write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
}
static int arc_pmu_device_probe(struct platform_device *pdev)
{
struct arc_reg_pct_build pct_bcr;
struct arc_reg_cc_build cc_bcr;
int i, j;
int i, j, has_interrupts;
int counter_size; /* in bits */
union cc_name {
struct {
......@@ -284,7 +460,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
pr_err("This core does not have performance counters!\n");
return -ENODEV;
}
BUG_ON(pct_bcr.c > ARC_PMU_MAX_HWEVENTS);
BUG_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS);
READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
BUG_ON(!cc_bcr.v); /* Counters exist but No countable conditions ? */
......@@ -293,11 +469,16 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
if (!arc_pmu)
return -ENOMEM;
has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0;
arc_pmu->n_counters = pct_bcr.c;
arc_pmu->counter_size = 32 + (pct_bcr.s << 4);
counter_size = 32 + (pct_bcr.s << 4);
arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL;
pr_info("ARC perf\t: %d counters (%d bits), %d countable conditions\n",
arc_pmu->n_counters, arc_pmu->counter_size, cc_bcr.c);
pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n",
arc_pmu->n_counters, counter_size, cc_bcr.c,
has_interrupts ? ", [overflow IRQ support]":"");
cc_name.str[8] = 0;
for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++)
......@@ -332,7 +513,36 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
.read = arc_pmu_read,
};
/* ARC 700 PMU does not support sampling events */
if (has_interrupts) {
int irq = platform_get_irq(pdev, 0);
unsigned long flags;
if (irq < 0) {
pr_err("Cannot get IRQ number for the platform\n");
return -ENODEV;
}
arc_pmu->irq = irq;
/*
* arc_cpu_pmu_irq_init() needs to be called on all cores for
* their respective local PMU.
* However we use opencoded on_each_cpu() to ensure it is called
* on core0 first, so that arc_request_percpu_irq() sets up
* AUTOEN etc. Otherwise enable_percpu_irq() fails to enable
* perf IRQ on non master cores.
* see arc_request_percpu_irq()
*/
preempt_disable();
local_irq_save(flags);
arc_cpu_pmu_irq_init();
local_irq_restore(flags);
smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1);
preempt_enable();
/* Clean all pending interrupt flags */
write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
} else
arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
return perf_pmu_register(&arc_pmu->pmu, pdev->name, PERF_TYPE_RAW);
......@@ -341,6 +551,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
#ifdef CONFIG_OF
static const struct of_device_id arc_pmu_match[] = {
{ .compatible = "snps,arc700-pct" },
{ .compatible = "snps,archs-pct" },
{},
};
MODULE_DEVICE_TABLE(of, arc_pmu_match);
......@@ -348,7 +559,7 @@ MODULE_DEVICE_TABLE(of, arc_pmu_match);
static struct platform_driver arc_pmu_driver = {
.driver = {
.name = "arc700-pct",
.name = "arc-pct",
.of_match_table = of_match_ptr(arc_pmu_match),
},
.probe = arc_pmu_device_probe,
......
......@@ -65,7 +65,7 @@ asmlinkage void ret_from_fork(void);
* ------------------
* | r25 | <==== top of Stack (thread.ksp)
* ~ ~
* | --to-- | (CALLEE Regs of user mode)
* | --to-- | (CALLEE Regs of kernel mode)
* | r13 |
* ------------------
* | fp |
......
......@@ -34,7 +34,7 @@
" .section .fixup,\"ax\"\n" \
" .align 4\n" \
"3: mov %0, 1\n" \
" b 2b\n" \
" j 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
......@@ -82,7 +82,7 @@
" .section .fixup,\"ax\"\n" \
" .align 4\n" \
"4: mov %0, 1\n" \
" b 3b\n" \
" j 3b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
......@@ -113,7 +113,7 @@
" .section .fixup,\"ax\"\n" \
" .align 4\n" \
"6: mov %0, 1\n" \
" b 5b\n" \
" j 5b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .align 4\n" \
......
......@@ -22,15 +22,22 @@
#include <asm/setup.h>
static int l2_line_sz;
int ioc_exists;
volatile int slc_enable = 1, ioc_enable = 1;
void (*_cache_line_loop_ic_fn)(unsigned long paddr, unsigned long vaddr,
unsigned long sz, const int cacheop);
void (*__dma_cache_wback_inv)(unsigned long start, unsigned long sz);
void (*__dma_cache_inv)(unsigned long start, unsigned long sz);
void (*__dma_cache_wback)(unsigned long start, unsigned long sz);
char *arc_cache_mumbojumbo(int c, char *buf, int len)
{
int n = 0;
struct cpuinfo_arc_cache *p;
#define IS_USED_RUN(v) ((v) ? "" : "(disabled) ")
#define PR_CACHE(p, cfg, str) \
if (!(p)->ver) \
n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
......@@ -45,10 +52,18 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
if (!is_isa_arcv2())
return buf;
p = &cpuinfo_arc700[c].slc;
if (p->ver)
n += scnprintf(buf + n, len - n,
"SLC\t\t: %uK, %uB Line\n", p->sz_k, p->line_len);
"SLC\t\t: %uK, %uB Line%s\n",
p->sz_k, p->line_len, IS_USED_RUN(slc_enable));
if (ioc_exists)
n += scnprintf(buf + n, len - n, "IOC\t\t:%s\n",
IS_USED_RUN(ioc_enable));
return buf;
}
......@@ -58,18 +73,9 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len)
* the cpuinfo structure for later use.
* No Validation done here, simply read/convert the BCRs
*/
void read_decode_cache_bcr(void)
static void read_decode_cache_bcr_arcv2(int cpu)
{
struct cpuinfo_arc_cache *p_ic, *p_dc, *p_slc;
unsigned int cpu = smp_processor_id();
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
} ibcr, dbcr;
struct cpuinfo_arc_cache *p_slc = &cpuinfo_arc700[cpu].slc;
struct bcr_generic sbcr;
struct bcr_slc_cfg {
......@@ -80,6 +86,39 @@ void read_decode_cache_bcr(void)
#endif
} slc_cfg;
struct bcr_clust_cfg {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:7, c:1, num_entries:8, num_cores:8, ver:8;
#else
unsigned int ver:8, num_cores:8, num_entries:8, c:1, pad:7;
#endif
} cbcr;
READ_BCR(ARC_REG_SLC_BCR, sbcr);
if (sbcr.ver) {
READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
p_slc->ver = sbcr.ver;
p_slc->sz_k = 128 << slc_cfg.sz;
l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
}
READ_BCR(ARC_REG_CLUSTER_BCR, cbcr);
if (cbcr.c && ioc_enable)
ioc_exists = 1;
}
void read_decode_cache_bcr(void)
{
struct cpuinfo_arc_cache *p_ic, *p_dc;
unsigned int cpu = smp_processor_id();
struct bcr_cache {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
#else
unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
#endif
} ibcr, dbcr;
p_ic = &cpuinfo_arc700[cpu].icache;
READ_BCR(ARC_REG_IC_BCR, ibcr);
......@@ -122,17 +161,8 @@ void read_decode_cache_bcr(void)
p_dc->ver = dbcr.ver;
slc_chk:
if (!is_isa_arcv2())
return;
p_slc = &cpuinfo_arc700[cpu].slc;
READ_BCR(ARC_REG_SLC_BCR, sbcr);
if (sbcr.ver) {
READ_BCR(ARC_REG_SLC_CFG, slc_cfg);
p_slc->ver = sbcr.ver;
p_slc->sz_k = 128 << slc_cfg.sz;
l2_line_sz = p_slc->line_len = (slc_cfg.lsz == 0) ? 128 : 64;
}
if (is_isa_arcv2())
read_decode_cache_bcr_arcv2(cpu);
}
/*
......@@ -516,11 +546,6 @@ noinline void slc_op(unsigned long paddr, unsigned long sz, const int op)
#endif
}
static inline int need_slc_flush(void)
{
return is_isa_arcv2() && l2_line_sz;
}
/***********************************************************
* Exported APIs
*/
......@@ -569,31 +594,75 @@ void flush_dcache_page(struct page *page)
}
EXPORT_SYMBOL(flush_dcache_page);
void dma_cache_wback_inv(unsigned long start, unsigned long sz)
/*
* DMA ops for systems with L1 cache only
* Make memory coherent with L1 cache by flushing/invalidating L1 lines
*/
static void __dma_cache_wback_inv_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
}
static void __dma_cache_inv_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_INV);
}
static void __dma_cache_wback_l1(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH);
}
if (need_slc_flush())
/*
* DMA ops for systems with both L1 and L2 caches, but without IOC
* Both L1 and L2 lines need to be explicity flushed/invalidated
*/
static void __dma_cache_wback_inv_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH_N_INV);
slc_op(start, sz, OP_FLUSH_N_INV);
}
EXPORT_SYMBOL(dma_cache_wback_inv);
void dma_cache_inv(unsigned long start, unsigned long sz)
static void __dma_cache_inv_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_INV);
if (need_slc_flush())
slc_op(start, sz, OP_INV);
}
EXPORT_SYMBOL(dma_cache_inv);
void dma_cache_wback(unsigned long start, unsigned long sz)
static void __dma_cache_wback_slc(unsigned long start, unsigned long sz)
{
__dc_line_op_k(start, sz, OP_FLUSH);
if (need_slc_flush())
slc_op(start, sz, OP_FLUSH);
}
/*
* DMA ops for systems with IOC
* IOC hardware snoops all DMA traffic keeping the caches consistent with
* memory - eliding need for any explicit cache maintenance of DMA buffers
*/
static void __dma_cache_wback_inv_ioc(unsigned long start, unsigned long sz) {}
static void __dma_cache_inv_ioc(unsigned long start, unsigned long sz) {}
static void __dma_cache_wback_ioc(unsigned long start, unsigned long sz) {}
/*
* Exported DMA API
*/
void dma_cache_wback_inv(unsigned long start, unsigned long sz)
{
__dma_cache_wback_inv(start, sz);
}
EXPORT_SYMBOL(dma_cache_wback_inv);
void dma_cache_inv(unsigned long start, unsigned long sz)
{
__dma_cache_inv(start, sz);
}
EXPORT_SYMBOL(dma_cache_inv);
void dma_cache_wback(unsigned long start, unsigned long sz)
{
__dma_cache_wback(start, sz);
}
EXPORT_SYMBOL(dma_cache_wback);
/*
......@@ -848,4 +917,41 @@ void arc_cache_init(void)
panic("Disable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
}
}
if (is_isa_arcv2() && l2_line_sz && !slc_enable) {
/* IM set : flush before invalidate */
write_aux_reg(ARC_REG_SLC_CTRL,
read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_IM);
write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
/* Important to wait for flush to complete */
while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY);
write_aux_reg(ARC_REG_SLC_CTRL,
read_aux_reg(ARC_REG_SLC_CTRL) | SLC_CTRL_DISABLE);
}
if (is_isa_arcv2() && ioc_exists) {
/* IO coherency base - 0x8z */
write_aux_reg(ARC_REG_IO_COH_AP0_BASE, 0x80000);
/* IO coherency aperture size - 512Mb: 0x8z-0xAz */
write_aux_reg(ARC_REG_IO_COH_AP0_SIZE, 0x11);
/* Enable partial writes */
write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
/* Enable IO coherency */
write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
__dma_cache_wback_inv = __dma_cache_wback_inv_ioc;
__dma_cache_inv = __dma_cache_inv_ioc;
__dma_cache_wback = __dma_cache_wback_ioc;
} else if (is_isa_arcv2() && l2_line_sz && slc_enable) {
__dma_cache_wback_inv = __dma_cache_wback_inv_slc;
__dma_cache_inv = __dma_cache_inv_slc;
__dma_cache_wback = __dma_cache_wback_slc;
} else {
__dma_cache_wback_inv = __dma_cache_wback_inv_l1;
__dma_cache_inv = __dma_cache_inv_l1;
__dma_cache_wback = __dma_cache_wback_l1;
}
}
......@@ -19,6 +19,7 @@
#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/export.h>
#include <asm/cache.h>
#include <asm/cacheflush.h>
/*
......@@ -53,6 +54,20 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
{
void *paddr, *kvaddr;
/*
* IOC relies on all data (even coherent DMA data) being in cache
* Thus allocate normal cached memory
*
* The gains with IOC are two pronged:
* -For streaming data, elides needs for cache maintenance, saving
* cycles in flush code, and bus bandwidth as all the lines of a
* buffer need to be flushed out to memory
* -For coherent data, Read/Write to buffers terminate early in cache
* (vs. always going to memory - thus are faster)
*/
if (is_isa_arcv2() && ioc_exists)
return dma_alloc_noncoherent(dev, size, dma_handle, gfp);
/* This is linear addr (0x8000_0000 based) */
paddr = alloc_pages_exact(size, gfp);
if (!paddr)
......@@ -85,6 +100,9 @@ EXPORT_SYMBOL(dma_alloc_coherent);
void dma_free_coherent(struct device *dev, size_t size, void *kvaddr,
dma_addr_t dma_handle)
{
if (is_isa_arcv2() && ioc_exists)
return dma_free_noncoherent(dev, size, kvaddr, dma_handle);
iounmap((void __force __iomem *)kvaddr);
free_pages_exact((void *)dma_handle, size);
......
......@@ -46,7 +46,7 @@ static void __init axs10x_enable_gpio_intc_wire(void)
* ------------------- -------------------
* | snps,dw-apb-gpio | | snps,dw-apb-gpio |
* ------------------- -------------------
* | |
* | #12 |
* | [ Debug UART on cpu card ]
* |
* ------------------------
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册