# File Support ## File Support Spring Integration’s file support extends the Spring Integration core with a dedicated vocabulary to deal with reading, writing, and transforming files. You need to include this dependency into your project: Maven ``` org.springframework.integration spring-integration-file 5.5.9 ``` Gradle ``` compile "org.springframework.integration:spring-integration-file:5.5.9" ``` It provides a namespace that enables elements defining channel adapters dedicated to files and support for transformers that can read file contents into strings or byte arrays. This section explains the workings of `FileReadingMessageSource` and `FileWritingMessageHandler` and how to configure them as beans. It also discusses the support for dealing with files through file-specific implementations of `Transformer`. Finally, it explains the file-specific namespace. ### Reading Files A `FileReadingMessageSource` can be used to consume files from the filesystem. This is an implementation of `MessageSource` that creates messages from a file system directory. The following example shows how to configure a `FileReadingMessageSource`: ``` ``` To prevent creating messages for certain files, you can supply a `FileListFilter`. By default, we use the following filters: * `IgnoreHiddenFileListFilter` * `AcceptOnceFileListFilter` The `IgnoreHiddenFileListFilter` ensures that hidden files are not processed. Note that the exact definition of hidden is system-dependent. For example, on UNIX-based systems, a file beginning with a period character is considered to be hidden. Microsoft Windows, on the other hand, has a dedicated file attribute to indicate hidden files. | |Version 4.2 introduced the `IgnoreHiddenFileListFilter`.
In prior versions, hidden files were included.
With the default configuration, the `IgnoreHiddenFileListFilter` is triggered first, followed by the `AcceptOnceFileListFilter`.| |---|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| The `AcceptOnceFileListFilter` ensures files are picked up only once from the directory. | |The `AcceptOnceFileListFilter` stores its state in memory.
If you wish the state to survive a system restart, you can use the `FileSystemPersistentAcceptOnceFileListFilter`.
This filter stores the accepted file names in a `MetadataStore` implementation (see [Metadata Store](./meta-data-store.html#metadata-store)).
This filter matches on the filename and modified time.

Since version 4.0, this filter requires a `ConcurrentMetadataStore`.
When used with a shared data store (such as `Redis` with the `RedisMetadataStore`), it lets filter keys be shared across multiple application instances or across a network file share being used by multiple servers.

Since version 4.1.5, this filter has a new property (`flushOnUpdate`), which causes it to flush the metadata store on every update (if the store implements `Flushable`).| |---|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| The persistent file list filters now have a boolean property `forRecursion`. Setting this property to `true`, also sets `alwaysAcceptDirectories`, which means that the recursive operation on the outbound gateways (`ls` and `mget`) will now always traverse the full directory tree each time. This is to solve a problem where changes deep in the directory tree were not detected. In addition, `forRecursion=true` causes the full path to files to be used as the metadata store keys; this solves a problem where the filter did not work properly if a file with the same name appears multiple times in different directories. IMPORTANT: This means that existing keys in a persistent metadata store will not be found for files beneath the top level directory. For this reason, the property is `false` by default; this may change in a future release. The following example configures a `FileReadingMessageSource` with a filter: ``` ``` A common problem with reading files is that a file may be detected before it is ready (that is, some other process may still be writing the file). The default `AcceptOnceFileListFilter` does not prevent this. In most cases, this can be prevented if the file-writing process renames each file as soon as it is ready for reading. A `filename-pattern` or `filename-regex` filter that accepts only files that are ready (perhaps based on a known suffix), composed with the default `AcceptOnceFileListFilter`, allows for this situation. The `CompositeFileListFilter` enables the composition, as the following example shows: ``` ``` If it is not possible to create the file with a temporary name and rename to the final name, Spring Integration provides another alternative. Version 4.2 added the `LastModifiedFileListFilter`. This filter can be configured with an `age` property so that only files older than this value are passed by the filter. The age defaults to 60 seconds, but you should choose an age that is large enough to avoid picking up a file early (due to, say, network glitches). The following example shows how to configure a `LastModifiedFileListFilter`: ``` ``` Starting with version 4.3.7, a `ChainFileListFilter` (an extension of `CompositeFileListFilter`) has been introduced to allow scenarios when subsequent filters should only see the result of the previous filter. (With the `CompositeFileListFilter`, all filters see all the files, but it passes only files that have passed all filters). An example of where the new behavior is required is a combination of `LastModifiedFileListFilter` and `AcceptOnceFileListFilter`, when we do not wish to accept the file until some amount of time has elapsed. With the `CompositeFileListFilter`, since the `AcceptOnceFileListFilter` sees all the files on the first pass, it does not pass it later when the other filter does. The `CompositeFileListFilter` approach is useful when a pattern filter is combined with a custom filter that looks for a secondary file to indicate that file transfer is complete. The pattern filter might only pass the primary file (such as `something.txt`) but the “done” filter needs to see whether (for example) `something.done` is present. Say we have files `a.txt`, `a.done`, and `b.txt`. The pattern filter passes only `a.txt` and `b.txt`, while the “done” filter sees all three files and passes only `a.txt`. The final result of the composite filter is that only `a.txt` is released. | |With the `ChainFileListFilter`, if any filter in the chain returns an empty list, the remaining filters are not invoked.| |---|------------------------------------------------------------------------------------------------------------------------| Version 5.0 introduced an `ExpressionFileListFilter` to execute SpEL expression against a file as a context evaluation root object. For this purpose, all the XML components for file handling (local and remote), along with an existing `filter` attribute, have been supplied with the `filter-expression` option, as the following example shows: ``` ``` Version 5.0.5 introduced the `DiscardAwareFileListFilter` implementations that have an interest in rejected files. For this purpose, such a filter implementation should be supplied with a callback through `addDiscardCallback(Consumer)`. In the framework, this functionality is used from the `FileReadingMessageSource.WatchServiceDirectoryScanner`, in combination with `LastModifiedFileListFilter`. Unlike the regular `DirectoryScanner`, the `WatchService` provides files for processing according to the events on the target file system. At the moment of polling an internal queue with those files, the `LastModifiedFileListFilter` may discard them because they are too young relative to its configured `age`. Therefore, we lose the file for future possible considerations. The discard callback hook lets us retain the file in the internal queue so that it is available to be checked against the `age` in subsequent polls. The `CompositeFileListFilter` also implements a `DiscardAwareFileListFilter` and populates a discard callback to all its `DiscardAwareFileListFilter` delegates. | |Since `CompositeFileListFilter` matches the files against all delegates, the `discardCallback` may be called several times for the same file.| |---|---------------------------------------------------------------------------------------------------------------------------------------------| Starting with version 5.1, the `FileReadingMessageSource` doesn’t check a directory for existence and doesn’t create it until its `start()` is called (typically via wrapping `SourcePollingChannelAdapter`). Previously, there was no simple way to prevent an operation system permissions error when referencing the directory, for example from tests, or when permissions are applied later. #### Message Headers Starting with version 5.0, the `FileReadingMessageSource` (in addition to the `payload` as a polled `File`) populates the following headers to the outbound `Message`: * `FileHeaders.FILENAME`: The `File.getName()` of the file to send. Can be used for subsequent rename or copy logic. * `FileHeaders.ORIGINAL_FILE`: The `File` object itself. Typically, this header is populated automatically by framework components (such as [splitters](#file-splitter) or [transformers](#file-transforming)) when we lose the original `File` object. However, for consistency and convenience with any other custom use cases, this header can be useful to get access to the original file. * `FileHeaders.RELATIVE_PATH`: A new header introduced to represent the part of file path relative to the root directory for the scan. This header can be useful when the requirement is to restore a source directory hierarchy in the other places. For this purpose, the `DefaultFileNameGenerator` (see "`[Generating File Names](#file-writing-file-names)) can be configured to use this header. #### Directory Scanning and Polling The `FileReadingMessageSource` does not produce messages for files from the directory immediately. It uses an internal queue for 'eligible files' returned by the `scanner`. The `scanEachPoll` option is used to ensure that the internal queue is refreshed with the latest input directory content on each poll. By default (`scanEachPoll = false`), the `FileReadingMessageSource` empties its queue before scanning the directory again. This default behavior is particularly useful to reduce scans of large numbers of files in a directory. However, in cases where custom ordering is required, it is important to consider the effects of setting this flag to `true`. The order in which files are processed may not be as expected. By default, files in the queue are processed in their natural (`path`) order. New files added by a scan, even when the queue already has files, are inserted in the appropriate position to maintain that natural order. To customize the order, the `FileReadingMessageSource` can accept a `Comparator` as a constructor argument. It is used by the internal (`PriorityBlockingQueue`) to reorder its content according to the business requirements. Therefore, to process files in a specific order, you should provide a comparator to the `FileReadingMessageSource` rather than ordering the list produced by a custom `DirectoryScanner`. Version 5.0 introduced `RecursiveDirectoryScanner` to perform file tree visiting. The implementation is based on the `Files.walk(Path start, int maxDepth, FileVisitOption…​ options)` functionality. The root directory (`DirectoryScanner.listFiles(File)`) argument is excluded from the result. All other sub-directories inclusions and exclusions are based on the target `FileListFilter` implementation. For example, the `SimplePatternFileListFilter` filters out directories by default. See [`AbstractDirectoryAwareFileListFilter`](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/filters/AbstractDirectoryAwareFileListFilter.html) and its implementations for more information. | |Starting with version 5.5, the `FileInboundChannelAdapterSpec` of the Java DSL has a convenient `recursive(boolean)` option to use a `RecursiveDirectoryScanner` in the target `FileReadingMessageSource` instead of the default one.| |---|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| #### Namespace Support The configuration for file reading can be simplified by using the file-specific namespace. To do so, use the following template: ``` ``` Within this namespace, you can reduce the `FileReadingMessageSource` and wrap it in an inbound Channel Adapter, as follows: ``` ``` The first channel adapter example relies on the default `FileListFilter` implementations: * `IgnoreHiddenFileListFilter` (do not process hidden files) * `AcceptOnceFileListFilter` (prevent duplication) Therefore, you can also leave off the `prevent-duplicates` and `ignore-hidden` attributes, as they are `true` by default. | |Spring Integration 4.2 introduced the `ignore-hidden` attribute.
In prior versions, hidden files were included.| |---|-------------------------------------------------------------------------------------------------------------------| The second channel adapter example uses a custom filter, the third uses the `filename-pattern` attribute to add an `AntPathMatcher` based filter, and the fourth uses the `filename-regex` attribute to add a regular expression pattern-based filter to the `FileReadingMessageSource`. The `filename-pattern` and `filename-regex` attributes are each mutually exclusive with the regular `filter` reference attribute. However, you can use the `filter` attribute to reference an instance of `CompositeFileListFilter` that combines any number of filters, including one or more pattern-based filters to fit your particular needs. When multiple processes read from the same directory, you may want to lock files to prevent them from being picked up concurrently. To do so, you can use a `FileLocker`. There is a `java.nio`-based implementation available, but it is also possible to implement your own locking scheme. The `nio` locker can be injected as follows: ``` ``` You can configure a custom locker as follows: ``` ``` | |When a file inbound adapter is configured with a locker, it takes responsibility for acquiring a lock before the file is allowed to be received.
It does not assume the responsibility to unlock the file.
If you have processed the file and keep the locks hanging around, you have a memory leak.
If this is a problem, you should call `FileLocker.unlock(File file)` yourself at the appropriate time.| |---|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| When filtering and locking files is not enough, you might need to control the way files are listed entirely. To implement this type of requirement, you can use an implementation of `DirectoryScanner`. This scanner lets you determine exactly what files are listed in each poll. This is also the interface that Spring Integration uses internally to wire `FileListFilter` instances and `FileLocker` to the `FileReadingMessageSource`. You can inject a custom `DirectoryScanner` into the `` on the `scanner` attribute, as the following example shows: ``` ``` Doing so gives you full freedom to choose the ordering, listing, and locking strategies. It is also important to understand that filters (including `patterns`, `regex`, `prevent-duplicates`, and others) and `locker` instances are actually used by the `scanner`. Any of these attributes set on the adapter are subsequently injected into the internal `scanner`. For the case of an external `scanner`, all filter and locker attributes are prohibited on the `FileReadingMessageSource`. They must be specified (if required) on that custom `DirectoryScanner`. In other words, if you inject a `scanner` into the `FileReadingMessageSource`, you should supply `filter` and `locker` on that `scanner`, not on the `FileReadingMessageSource`. | |By default, the `DefaultDirectoryScanner` uses an `IgnoreHiddenFileListFilter` and an `AcceptOnceFileListFilter`.
To prevent their use, you can configure your own filter (such as `AcceptAllFileListFilter`) or even set it to `null`.| |---|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| #### `WatchServiceDirectoryScanner` The `FileReadingMessageSource.WatchServiceDirectoryScanner` relies on file-system events when new files are added to the directory. During initialization, the directory is registered to generate events. The initial file list is also built during initialization. While walking the directory tree, any subdirectories encountered are also registered to generate events. On the first poll, the initial file list from walking the directory is returned. On subsequent polls, files from new creation events are returned. If a new subdirectory is added, its creation event is used to walk the new subtree to find existing files and register any new subdirectories found. | |There is an issue with `WatchKey` when its internal events `queue` is not drained by the program as quickly as the directory modification events occur.
If the queue size is exceeded, a `StandardWatchEventKinds.OVERFLOW` is emitted to indicate that some file system events may be lost.
In this case, the root directory is re-scanned completely.
To avoid duplicates, consider using an appropriate `FileListFilter` (such as the `AcceptOnceFileListFilter`) or removing files when processing is complete.| |---|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| The `WatchServiceDirectoryScanner` can be enabled through the `FileReadingMessageSource.use-watch-service` option, which is mutually exclusive with the `scanner` option. An internal `FileReadingMessageSource.WatchServiceDirectoryScanner` instance is populated for the provided `directory`. In addition, now the `WatchService` polling logic can track the `StandardWatchEventKinds.ENTRY_MODIFY` and `StandardWatchEventKinds.ENTRY_DELETE`. If you need to track the modification of existing files as well as new files, you should implement the `ENTRY_MODIFY` events logic in the `FileListFilter`. Otherwise, the files from those events are treated the same way. The `ResettableFileListFilter` implementations pick up the `ENTRY_DELETE` events. Consequently, their files are provided for the `remove()` operation. When this event is enabled, filters such as the `AcceptOnceFileListFilter` have the file removed. As a result, if a file with the same name appears, it passes the filter and is sent as a message. For this purpose, the `watch-events` property (`FileReadingMessageSource.setWatchEvents(WatchEventType…​ watchEvents)`) has been introduced. (`WatchEventType` is a public inner enumeration in `FileReadingMessageSource`.) With such an option, we can use one downstream flow logic for new files and use some other logic for modified files. The following example shows how to configure different logic for create and modify events in the same directory: ``` ``` #### Limiting Memory Consumption You can use a `HeadDirectoryScanner` to limit the number of files retained in memory. This can be useful when scanning large directories. With XML configuration, this is enabled by setting the `queue-size` property on the inbound channel adapter. Prior to version 4.2, this setting was incompatible with the use of any other filters. Any other filters (including `prevent-duplicates="true"`) overwrote the filter used to limit the size. | |The use of a `HeadDirectoryScanner` is incompatible with an `AcceptOnceFileListFilter`.
Since all filters are consulted during the poll decision, the `AcceptOnceFileListFilter` does not know that other filters might be temporarily filtering files.
Even if files that were previously filtered by the `HeadDirectoryScanner.HeadFilter` are now available, the `AcceptOnceFileListFilter` filters them.

Generally, instead of using an `AcceptOnceFileListFilter` in this case, you should remove the processed files so that the previously filtered files are available on a future poll.| |---|-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| #### Configuring with Java Configuration The following Spring Boot application shows an example of how to configure the outbound adapter with Java configuration: ``` @SpringBootApplication public class FileReadingJavaApplication { public static void main(String[] args) { new SpringApplicationBuilder(FileReadingJavaApplication.class) .web(false) .run(args); } @Bean public MessageChannel fileInputChannel() { return new DirectChannel(); } @Bean @InboundChannelAdapter(value = "fileInputChannel", poller = @Poller(fixedDelay = "1000")) public MessageSource fileReadingMessageSource() { FileReadingMessageSource source = new FileReadingMessageSource(); source.setDirectory(new File(INBOUND_PATH)); source.setFilter(new SimplePatternFileListFilter("*.txt")); return source; } @Bean @Transformer(inputChannel = "fileInputChannel", outputChannel = "processFileChannel") public FileToStringTransformer fileToStringTransformer() { return new FileToStringTransformer(); } } ``` #### Configuring with the Java DSL The following Spring Boot application shows an example of how to configure the outbound adapter with the Java DSL: ``` @SpringBootApplication public class FileReadingJavaApplication { public static void main(String[] args) { new SpringApplicationBuilder(FileReadingJavaApplication.class) .web(false) .run(args); } @Bean public IntegrationFlow fileReadingFlow() { return IntegrationFlows .from(Files.inboundAdapter(new File(INBOUND_PATH)) .patternFilter("*.txt"), e -> e.poller(Pollers.fixedDelay(1000))) .transform(Files.toStringTransformer()) .channel("processFileChannel") .get(); } } ``` #### 'tail’ing Files Another popular use case is to get 'lines' from the end (or tail) of a file, capturing new lines when they are added. Two implementations are provided. The first, `OSDelegatingFileTailingMessageProducer`, uses the native `tail` command (on operating systems that have one). This is generally the most efficient implementation on those platforms. For operating systems that do not have a `tail` command, the second implementation, `ApacheCommonsFileTailingMessageProducer`, uses the Apache `commons-io` `Tailer` class. In both cases, file system events, such as files being unavailable and other events, are published as `ApplicationEvent` instances by using the normal Spring event publishing mechanism. Examples of such events include the following: ``` [message=tail: cannot open '/tmp/somefile' for reading: No such file or directory, file=/tmp/somefile] [message=tail: '/tmp/somefile' has become accessible, file=/tmp/somefile] [message=tail: '/tmp/somefile' has become inaccessible: No such file or directory, file=/tmp/somefile] [message=tail: '/tmp/somefile' has appeared; following end of new file, file=/tmp/somefile] ``` The sequence of events shown in the preceding example might occur, for example, when a file is rotated. Starting with version 5.0, a `FileTailingIdleEvent` is emitted when there is no data in the file during `idleEventInterval`. The following example shows what such an event looks like: ``` [message=Idle timeout, file=/tmp/somefile] [idle time=5438] ``` | |Not all platforms that support a `tail` command provide these status messages.| |---|------------------------------------------------------------------------------| Messages emitted from these endpoints have the following headers: * `FileHeaders.ORIGINAL_FILE`: The `File` object * `FileHeaders.FILENAME`: The file name (`File.getName()`) | |In versions prior to version 5.0, the `FileHeaders.FILENAME` header contained a string representation of the file’s absolute path.
You can now obtain that string representation by calling `getAbsolutePath()` on the original file header.| |---|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| The following example creates a native adapter with the default options ('-F -n 0', meaning to follow the file name from the current end). ``` ``` The following example creates a native adapter with '-F -n +0' options (meaning follow the file name, emitting all existing lines). ``` ``` If the `tail` command fails (on some platforms, a missing file causes the `tail` to fail, even with `-F` specified), the command is retried every 10 seconds. By default, native adapters capture from standard output and send the content as messages. They also capture from standard error to raise events. Starting with version 4.3.6, you can discard the standard error events by setting the `enable-status-reader` to `false`, as the following example shows: ``` ``` In the following example, `IdleEventInterval` is set to `5000`, meaning that, if no lines are written for five seconds, `FileTailingIdleEvent` is triggered every five seconds: ``` ``` This can be useful when you need to stop the adapter. The following example creates an Apache `commons-io` `Tailer` adapter that examines the file for new lines every two seconds and checks for existence of a missing file every ten seconds: ``` ``` |**1**|The file is tailed from the beginning (`end="false"`) instead of the end (which is the default).| |-----|------------------------------------------------------------------------------------------------| |**2**| The file is reopened for each chunk (the default is to keep the file open). | | |Specifying the `delay`, `end` or `reopen` attributes forces the use of the Apache `commons-io` adapter and makes the `native-options` attribute unavailable.| |---|------------------------------------------------------------------------------------------------------------------------------------------------------------| #### Dealing With Incomplete Data A common problem in file-transfer scenarios is how to determine that the transfer is complete so that you do not start reading an incomplete file. A common technique to solve this problem is to write the file with a temporary name and then atomically rename it to the final name. This technique, together with a filter that masks the temporary file from being picked up by the consumer, provides a robust solution. This technique is used by Spring Integration components that write files (locally or remotely). By default, they append `.writing` to the file name and remove it when the transfer is complete. Another common technique is to write a second “marker” file to indicate that the file transfer is complete. In this scenario, you should not consider `somefile.txt` (for example) to be available for use until `somefile.txt.complete` is also present. Spring Integration version 5.0 introduced new filters to support this mechanism. Implementations are provided for the file system (`FileSystemMarkerFilePresentFileListFilter`), [FTP](./ftp.html#ftp-incomplete) and [SFTP](./sftp.html#sftp-incomplete). They are configurable such that the marker file can have any name, although it is usually related to the file being transferred. See the [Javadoc](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/filters/FileSystemMarkerFilePresentFileListFilter.html) for more information. ### Writing files To write messages to the file system, you can use a [`FileWritingMessageHandler`](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/FileWritingMessageHandler.html). This class can deal with the following payload types: * `File` * `String` * byte array * `InputStream` (since *version 4.2*) For a String payload, you can configure the encoding and the charset. To make things easier, you can configure the `FileWritingMessageHandler` as part of an outbound channel adapter or outbound gateway by using the XML namespace. Starting with version 4.3, you can specify the buffer size to use when writing files. Starting with version 5.1, you can provide a `BiConsumer>` `newFileCallback` which is triggered if you use `FileExistsMode.APPEND` or `FileExistsMode.APPEND_NO_FLUSH` and a new file has to be created. This callback receives a newly created file and the message which triggered it. This callback could be used to write a CSV header defined in the message header, for an example. #### Generating File Names In its simplest form, the `FileWritingMessageHandler` requires only a destination directory for writing the files. The name of the file to be written is determined by the handler’s [`FileNameGenerator`](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/FileNameGenerator.html). The [default implementation](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/DefaultFileNameGenerator.html) looks for a message header whose key matches the constant defined as [`FileHeaders.FILENAME`](https://docs.spring.io/spring-integration/api/constant-values.html#org.springframework.integration.file.FileHeaders.FILENAME). Alternatively, you can specify an expression to be evaluated against the message to generate a file name — for example, `headers['myCustomHeader'] + '.something'`. The expression must evaluate to a `String`. For convenience, the `DefaultFileNameGenerator` also provides the `setHeaderName` method, letting you explicitly specify the message header whose value is to be used as the filename. Once set up, the `DefaultFileNameGenerator` employs the following resolution steps to determine the filename for a given message payload: 1. Evaluate the expression against the message and, if the result is a non-empty `String`, use it as the filename. 2. Otherwise, if the payload is a `java.io.File`, use the `File` object’s filename. 3. Otherwise, use the message ID appended with .`msg` as the filename. When you use the XML namespace support, both the file outbound channel adapter and the file outbound gateway support the following mutually exclusive configuration attributes: * `filename-generator` (a reference to a `FileNameGenerator` implementation) * `filename-generator-expression` (an expression that evaluates to a `String`) While writing files, a temporary file suffix is used (its default is `.writing`). It is appended to the filename while the file is being written. To customize the suffix, you can set the `temporary-file-suffix` attribute on both the file outbound channel adapter and the file outbound gateway. | |When using the `APPEND` file `mode`, the `temporary-file-suffix` attribute is ignored, since the data is appended to the file directly.| |---|---------------------------------------------------------------------------------------------------------------------------------------| Starting with ,version 4.2.5, the generated file name (as a result of `filename-generator` or `filename-generator-expression`evaluation) can represent a child path together with the target file name. It is used as a second constructor argument for `File(File parent, String child)` as before. However, in the past we did not create (`mkdirs()`) directories for the child path, assuming only the file name. This approach is useful for cases when we need to restore the file system tree to match the source directory — for example, when unzipping the archive and saving all the files in the target directory in the original order. #### Specifying the Output Directory Both, the file outbound channel adapter and the file outbound gateway provide two mutually exclusive configuration attributes for specifying the output directory: * `directory` * `directory-expression` | |Spring Integration 2.2 introduced the `directory-expression` attribute.| |---|-----------------------------------------------------------------------| ##### Using the `directory` Attribute When you use the `directory` attribute, the output directory is set to a fixed value, which is set when the `FileWritingMessageHandler` is initialized. If you do not specify this attribute, you must use the `directory-expression` attribute. ##### Using the `directory-expression` Attribute If you want to have full SpEL support, you can use the `directory-expression` attribute. This attribute accepts a SpEL expression that is evaluated for each message being processed. Thus, you have full access to a message’s payload and its headers when you dynamically specify the output file directory. The SpEL expression must resolve to either a `String`, `java.io.File` or `org.springframework.core.io.Resource`. (The later is evaluated into a `File` anyway.) Furthermore, the resulting `String` or `File` must point to a directory. If you do not specify the `directory-expression` attribute, then you must set the `directory` attribute. ##### Using the `auto-create-directory` Attribute By default, if the destination directory does not exist, the respective destination directory and any non-existing parent directories are automatically created. To prevent that behavior, you can set the `auto-create-directory` attribute to `false`. This attribute applies to both the `directory` and the `directory-expression` attributes. | |When using the `directory` attribute and `auto-create-directory` is `false`, the following change was made starting with Spring Integration 2.2:

Instead of checking for the existence of the destination directory when the adapter is initialized, this check is now performed for each message being processed.

Furthermore, if `auto-create-directory` is `true` and the directory was deleted between the processing of messages, the directory is re-created for each message being processed.| |---|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| #### Dealing with Existing Destination Files When you write files and the destination file already exists, the default behavior is to overwrite that target file. You can change this behavior by setting the `mode` attribute on the relevant file outbound components. The following options exist: * `REPLACE` (Default) * `REPLACE_IF_MODIFIED` * `APPEND` * `APPEND_NO_FLUSH` * `FAIL` * `IGNORE` | |Spring Integration 2.2 introduced the `mode` attribute and the `APPEND`, `FAIL`, and `IGNORE` options.| |---|------------------------------------------------------------------------------------------------------| `REPLACE` If the target file already exists, it is overwritten. If the `mode` attribute is not specified, this is the default behavior when writing files. `REPLACE_IF_MODIFIED` If the target file already exists, it is overwritten only if the last modified timestamp differs from that of the source file. For `File` payloads, the payload `lastModified` time is compared to the existing file. For other payloads, the `FileHeaders.SET_MODIFIED` (`file_setModified`) header is compared to the existing file. If the header is missing or has a value that is not a `Number`, the file is always replaced. `APPEND` This mode lets you append message content to the existing file instead of creating a new file each time. Note that this attribute is mutually exclusive with the `temporary-file-suffix` attribute because, when it appends content to the existing file, the adapter no longer uses a temporary file. The file is closed after each message. `APPEND_NO_FLUSH` This option has the same semantics as `APPEND`, but the data is not flushed and the file is not closed after each message. This can provide a significant performance at the risk of data loss in the event of a failure. See [Flushing Files When Using `APPEND_NO_FLUSH`](#file-flushing) for more information. `FAIL` If the target file exists, a [`MessageHandlingException`](https://docs.spring.io/spring/docs/current/javadoc-api/org/springframework/messaging/MessageHandlingException.html) is thrown. `IGNORE` If the target file exists, the message payload is silently ignored. | |When using a temporary file suffix (the default is `.writing`), the `IGNORE` option applies if either the final file name or the temporary file name exists.| |---|------------------------------------------------------------------------------------------------------------------------------------------------------------| #### Flushing Files When Using `APPEND_NO_FLUSH` The `APPEND_NO_FLUSH` mode was added in version 4.3. Using it can improve performance because the file is not closed after each message. However, this can cause data loss in the event of a failure. Spring Integration provides several flushing strategies to mitigate this data loss: * Use `flushInterval`. If a file is not written to for this period of time, it is automatically flushed. This is approximate and may be up to `1.33x` this time (with an average of `1.167x`). * Send a message containing a regular expression to the message handler’s `trigger` method. Files with absolute path names matching the pattern are flushed. * Provide the handler with a custom `MessageFlushPredicate` implementation to modify the action taken when a message is sent to the `trigger` method. * Invoke one of the handler’s `flushIfNeeded` methods by passing in a custom `FileWritingMessageHandler.FlushPredicate` or `FileWritingMessageHandler.MessageFlushPredicate` implementation. The predicates are called for each open file. See the [Javadoc](https://docs.spring.io/spring-integration/api/index.html) for these interfaces for more information. Note that, since version 5.0, the predicate methods provide another parameter: the time that the current file was first written to if new or previously closed. When using `flushInterval`, the interval starts at the last write. The file is flushed only if it is idle for the interval. Starting with version 4.3.7, an additional property (`flushWhenIdle`) can be set to `false`, meaning that the interval starts with the first write to a previously flushed (or new) file. #### File Timestamps By default, the destination file’s `lastModified` timestamp is the time when the file was created (except that an in-place rename retains the current timestamp). Starting with version 4.3, you can now configure `preserve-timestamp` (or `setPreserveTimestamp(true)` when using Java configuration). For `File` payloads, this transfers the timestamp from the inbound file to the outbound (regardless of whether a copy was required). For other payloads, if the `FileHeaders.SET_MODIFIED` header (`file_setModified`) is present, it is used to set the destination file’s `lastModified` timestamp, as long as the header is a `Number`. #### File Permissions Starting with version 5.0, when writing files to a file system that supports Posix permissions, you can specify those permissions on the outbound channel adapter or gateway. The property is an integer and is usually supplied in the familiar octal format — for example, `0640`, meaning that the owner has read/write permissions, the group has read-only permission, and others have no access. #### File Outbound Channel Adapter The following example configures a file outbound channel adapter: ``` ``` The namespace-based configuration also supports a `delete-source-files` attribute. If set to `true`, it triggers the deletion of the original source files after writing to a destination. The default value for that flag is `false`. The following example shows how to set it to `true`: ``` ``` | |The `delete-source-files` attribute has an effect only if the inbound message has a `File` payload or if the `FileHeaders.ORIGINAL_FILE` header value contains either the source `File` instance or a `String` representing the original file path.| |---|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| Starting with version 4.2, the `FileWritingMessageHandler` supports an `append-new-line` option. If set to `true`, a new line is appended to the file after a message is written. The default attribute value is `false`. The following example shows how to use the `append-new-line` option: ``` ``` #### Outbound Gateway In cases where you want to continue processing messages based on the written file, you can use the `outbound-gateway` instead. It plays a role similar to that of the `outbound-channel-adapter`. However, after writing the file, it also sends it to the reply channel as the payload of a message. The following example configures an outbound gateway: ``` ``` As mentioned earlier, you can also specify the `mode` attribute, which defines the behavior of how to deal with situations where the destination file already exists. See [Dealing with Existing Destination Files](#file-writing-destination-exists) for further details. Generally, when using the file outbound gateway, the result file is returned as the message payload on the reply channel. This also applies when specifying the `IGNORE` mode. In that case the pre-existing destination file is returned. If the payload of the request message was a file, you still have access to that original file through the message header. See [FileHeaders.ORIGINAL\_FILE](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/FileHeaders.html). | |The 'outbound-gateway' works well in cases where you want to first move a file and then send it through a processing pipeline.
In such cases, you may connect the file namespace’s `inbound-channel-adapter` element to the `outbound-gateway` and then connect that gateway’s `reply-channel` to the beginning of the pipeline.| |---|------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| If you have more elaborate requirements or need to support additional payload types as input to be converted to file content, you can extend the `FileWritingMessageHandler`, but a much better option is to rely on a [`Transformer`](#file-transforming). #### Configuring with Java Configuration The following Spring Boot application shows an example of how to configure the inbound adapter with Java configuration: ``` @SpringBootApplication @IntegrationComponentScan public class FileWritingJavaApplication { public static void main(String[] args) { ConfigurableApplicationContext context = new SpringApplicationBuilder(FileWritingJavaApplication.class) .web(false) .run(args); MyGateway gateway = context.getBean(MyGateway.class); gateway.writeToFile("foo.txt", new File(tmpDir.getRoot(), "fileWritingFlow"), "foo"); } @Bean @ServiceActivator(inputChannel = "writeToFileChannel") public MessageHandler fileWritingMessageHandler() { Expression directoryExpression = new SpelExpressionParser().parseExpression("headers.directory"); FileWritingMessageHandler handler = new FileWritingMessageHandler(directoryExpression); handler.setFileExistsMode(FileExistsMode.APPEND); return handler; } @MessagingGateway(defaultRequestChannel = "writeToFileChannel") public interface MyGateway { void writeToFile(@Header(FileHeaders.FILENAME) String fileName, @Header(FileHeaders.FILENAME) File directory, String data); } } ``` #### Configuring with the Java DSL The following Spring Boot application shows an example of how to configure the inbound adapter with the Java DSL: ``` @SpringBootApplication public class FileWritingJavaApplication { public static void main(String[] args) { ConfigurableApplicationContext context = new SpringApplicationBuilder(FileWritingJavaApplication.class) .web(false) .run(args); MessageChannel fileWritingInput = context.getBean("fileWritingInput", MessageChannel.class); fileWritingInput.send(new GenericMessage<>("foo")); } @Bean public IntegrationFlow fileWritingFlow() { return IntegrationFlows.from("fileWritingInput") .enrichHeaders(h -> h.header(FileHeaders.FILENAME, "foo.txt") .header("directory", new File(tmpDir.getRoot(), "fileWritingFlow"))) .handle(Files.outboundGateway(m -> m.getHeaders().get("directory"))) .channel(MessageChannels.queue("fileWritingResultChannel")) .get(); } } ``` ### File Transformers To transform data read from the file system to objects and the other way around, you need to do some work. Unlike `FileReadingMessageSource` and to a lesser extent `FileWritingMessageHandler`, you probably need your own mechanism to get the job done. For this, you can implement the `Transformer` interface. Alternatively, you can extend the `AbstractFilePayloadTransformer` for inbound messages. Spring Integration provides some obvious implementations. See the [Javadoc for the `Transformer` interface](https://docs.spring.io/spring-integration/api/org/springframework/integration/transformer/Transformer.html) to see which Spring Integration classes implement it. Similarly, you can check the [Javadoc for the `AbstractFilePayloadTransformer` class](https://docs.spring.io/spring-integration/api/org/springframework/integration/file/transformer/AbstractFilePayloadTransformer.html) to see which Spring Integration classes extend it. `FileToByteArrayTransformer` extends `AbstractFilePayloadTransformer` and transforms a `File` object into a `byte[]` by using Spring’s `FileCopyUtils`. It is often better to use a sequence of transformers than to put all transformations in a single class. In that case the `File` to `byte[]` conversion might be a logical first step. `FileToStringTransformer` extends `AbstractFilePayloadTransformer` convert a `File` object to a `String`. If nothing else, this can be useful for debugging (consider using it with a [wire tap](./channel.html#channel-wiretap)). To configure file-specific transformers, you can use the appropriate elements from the file namespace, as the following example shows: ``` ``` The `delete-files` option signals to the transformer that it should delete the inbound file after the transformation is complete. This is in no way a replacement for using an `AcceptOnceFileListFilter` when the `FileReadingMessageSource` is being used in a multi-threaded environment (such as when you use Spring Integration in general). ### File Splitter The `FileSplitter` was added in version 4.1.2, and its namespace support was added in version 4.2. The `FileSplitter` splits text files into individual lines, based on `BufferedReader.readLine()`. By default, the splitter uses an `Iterator` to emit lines one at a time as they are read from the file. Setting the `iterator` property to `false` causes it to read all the lines into memory before emitting them as messages. One use case for this might be if you want to detect I/O errors on the file before sending any messages containing lines. However, it is only practical for relatively short files. Inbound payloads can be `File`, `String` (a `File` path), `InputStream`, or `Reader`. Other payload types are emitted unchanged. The following listing shows possible ways to configure a `FileSplitter`: Java DSL ``` @SpringBootApplication public class FileSplitterApplication { public static void main(String[] args) { new SpringApplicationBuilder(FileSplitterApplication.class) .web(false) .run(args); } @Bean public IntegrationFlow fileSplitterFlow() { return IntegrationFlows .from(Files.inboundAdapter(tmpDir.getRoot()) .filter(new ChainFileListFilter() .addFilter(new AcceptOnceFileListFilter<>()) .addFilter(new ExpressionFileListFilter<>( new FunctionExpression(f -> "foo.tmp".equals(f.getName())))))) .split(Files.splitter() .markers() .charset(StandardCharsets.US_ASCII) .firstLineAsHeader("fileHeader") .applySequence(true)) .channel(c -> c.queue("fileSplittingResultChannel")) .get(); } } ``` Kotlin DSL ``` @Bean fun fileSplitterFlow() = integrationFlow( Files.inboundAdapter(tmpDir.getRoot()) .filter( ChainFileListFilter() .addFilter(AcceptOnceFileListFilter()) .addFilter(ExpressionFileListFilter(FunctionExpression { f: File? -> "foo.tmp" == f!!.name })) ) ) { split( Files.splitter() .markers() .charset(StandardCharsets.US_ASCII) .firstLineAsHeader("fileHeader") .applySequence(true) ) channel { queue("fileSplittingResultChannel") } } ``` Java ``` @Splitter(inputChannel="toSplitter") @Bean public MessageHandler fileSplitter() { FileSplitter splitter = new FileSplitter(true, true); splitter.setApplySequence(true); splitter.setOutputChannel(outputChannel); return splitter; } ``` XML ``` (14) ``` |**1** | The bean name of the splitter. | |------|----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| |**2** | Set to `true` (the default) to use an iterator or `false` to load the file into memory before sending lines. | |**3** |Set to `true` to emit start-of-file and end-of-file marker messages before and after the file data.
Markers are messages with `FileSplitter.FileMarker` payloads (with `START` and `END` values in the `mark` property).
You might use markers when sequentially processing files in a downstream flow where some lines are filtered.
They enable the downstream processing to know when a file has been completely processed.
In addition, a `file_marker` header that contains `START` or `END` is added to these messages.
The `END` marker includes a line count.
If the file is empty, only `START` and `END` markers are emitted with `0` as the `lineCount`.
The default is `false`.
When `true`, `apply-sequence` is `false` by default.
See also `markers-json` (the next attribute).| |**4** | When `markers` is true, set this to `true` to have the `FileMarker` objects be converted to a JSON string.
(Uses a `SimpleJsonSerializer` underneath). | |**5** | Set to `false` to disable the inclusion of `sequenceSize` and `sequenceNumber` headers in messages.
The default is `true`, unless `markers` is `true`.
When `true` and `markers` is `true`, the markers are included in the sequencing.
When `true` and `iterator` is `true`, the `sequenceSize` header is set to `0`, because the size is unknown. | |**6** | Set to `true` to cause a `RequiresReplyException` to be thrown if there are no lines in the file.
The default is `false`. | |**7** | Set the charset name to be used when reading text data into `String` payloads.
The default is the platform charset. | |**8** | The header name for the first line to be carried as a header in the messages emitted for the remaining lines.
Since version 5.0. | |**9** | Set the input channel used to send messages to the splitter. | |**10**| Set the output channel to which messages are sent. | |**11**| Set the send timeout.
Only applies if the `output-channel` can block — such as a full `QueueChannel`. | |**12**| Set to `false` to disable automatically starting the splitter when the context is refreshed.
The default is `true`. | |**13**| Set the order of this endpoint if the `input-channel` is a ``. | |**14**| Set the startup phase for the splitter (used when `auto-startup` is `true`). | The `FileSplitter` also splits any text-based `InputStream` into lines. Starting with version 4.3, when used in conjunction with an FTP or SFTP streaming inbound channel adapter or an FTP or SFTP outbound gateway that uses the `stream` option to retrieve a file, the splitter automatically closes the session that supports the stream when the file is completely consumed See [FTP Streaming Inbound Channel Adapter](./ftp.html#ftp-streaming) and [SFTP Streaming Inbound Channel Adapter](./sftp.html#sftp-streaming) as well as [FTP Outbound Gateway](./ftp.html#ftp-outbound-gateway) and [SFTP Outbound Gateway](./sftp.html#sftp-outbound-gateway) for more information about these facilities. When using Java configuration, an additional constructor is available, as the following example shows: ``` public FileSplitter(boolean iterator, boolean markers, boolean markersJson) ``` When `markersJson` is true, the markers are represented as a JSON string (using a `SimpleJsonSerializer`). Version 5.0 introduced the `firstLineAsHeader` option to specify that the first line of content is a header (such as column names in a CSV file). The argument passed to this property is the header name under which the first line is carried as a header in the messages emitted for the remaining lines. This line is not included in the sequence header (if `applySequence` is true) nor in the `lineCount` associated with `FileMarker.END`. NOTE: Starting with version 5.5, the lineCount` is also included as a `FileHeaders.LINE_COUNT` into headers of the `FileMarker.END` message, since the `FileMarker` could be serialized into JSON. If a file contains only the header line, the file is treated as empty and, therefore, only `FileMarker` instances are emitted during splitting (if markers are enabled — otherwise, no messages are emitted). By default (if no header name is set), the first line is considered to be data and becomes the payload of the first emitted message. If you need more complex logic about header extraction from the file content (not first line, not the whole content of the line, not one particular header, and so on), consider using [header enricher](./content-enrichment.html#header-enricher) ahead of the `FileSplitter`. Note that the lines that have been moved to the headers might be filtered downstream from the normal content process. #### Idempotent Downstream Processing a Split File When `apply-sequence` is true, the splitter adds the line number in the `SEQUENCE_NUMBER` header (when `markers` is true, the markers are counted as lines). The line number can be used with an [Idempotent Receiver](./handler-advice.html#idempotent-receiver) to avoid reprocessing lines after a restart. For example: ``` @Bean public ConcurrentMetadataStore store() { return new ZookeeperMetadataStore(); } @Bean public MetadataStoreSelector selector() { return new MetadataStoreSelector( message -> message.getHeaders().get(FileHeaders.ORIGINAL_FILE, File.class) .getAbsolutePath(), message -> message.getHeaders().get(IntegrationMessageHeaderAccessor.SEQUENCE_NUMBER) .toString(), store()) .compareValues( (oldVal, newVal) -> Integer.parseInt(oldVal) < Integer.parseInt(newVal)); } @Bean public IdempotentReceiverInterceptor idempotentReceiverInterceptor() { return new IdempotentReceiverInterceptor(selector()); } @Bean public IntegrationFlow flow() { ... .split(new FileSplitter()) ... .handle("lineHandler", e -> e.advice(idempotentReceiverInterceptor())) ... } ``` ### File Aggregator Starting with version 5.5, a `FileAggregator` is introduced to cover other side of `FileSplitter` use-case when START/END markers are enabled. For convenience the `FileAggregator` implements all three sequence details strategies: * The `HeaderAttributeCorrelationStrategy` with the `FileHeaders.FILENAME` attribute is used for correlation key calculation. When markers are enabled on the `FileSplitter`, it does not populate sequence details headers, since START/END marker messages are also included into the sequence size. The `FileHeaders.FILENAME` is still populated for each line emitted, including START/END marker messages. * The `FileMarkerReleaseStrategy` - checks for `FileSplitter.FileMarker.Mark.END` message in the group and then compare a `FileHeaders.LINE_COUNT` header value with the group size minus `2` - `FileSplitter.FileMarker` instances. It also implements a convenient `GroupConditionProvider` contact for `conditionSupplier` function to be used in the `AbstractCorrelatingMessageHandler`. See [Message Group Condition](./message-store.html#message-group-condition) for more information. * The `FileAggregatingMessageGroupProcessor` just removes `FileSplitter.FileMarker` messages from the group and collect the rest of messages into a list payload to produce. The following listing shows possible ways to configure a `FileAggregator`: Java DSL ``` @Bean public IntegrationFlow fileSplitterAggregatorFlow(TaskExecutor taskExecutor) { return f -> f .split(Files.splitter() .markers() .firstLineAsHeader("firstLine")) .channel(c -> c.executor(taskExecutor)) .filter(payload -> !(payload instanceof FileSplitter.FileMarker), e -> e.discardChannel("aggregatorChannel")) .transform(String::toUpperCase) .channel("aggregatorChannel") .aggregate(new FileAggregator()) .channel(c -> c.queue("resultChannel")); } ``` Kotlin DSL ``` @Bean fun fileSplitterAggregatorFlow(taskExecutor: TaskExecutor?) = integrationFlow { split(Files.splitter().markers().firstLineAsHeader("firstLine")) channel { executor(taskExecutor) } filter({ it !is FileMarker }) { discardChannel("aggregatorChannel") } transform(String::toUpperCase) channel("aggregatorChannel") aggregate(FileAggregator()) channel { queue("resultChannel") } } ``` Java ``` @serviceActivator(inputChannel="toAggregateFile") @Bean public AggregatorFactoryBean fileAggregator() { AggregatorFactoryBean aggregator = new AggregatorFactoryBean(); aggregator.setProcessorBean(new FileAggregator()); aggregator.setOutputChannel(outputChannel); return aggregator; } ``` XML ``` ``` If default behavior of the `FileAggregator` does not satisfy the target logic, it is recommended to configure an aggregator endpoint with individual strategies. See `FileAggregator` JavaDocs for more information. ### Remote Persistent File List Filters Inbound and streaming inbound remote file channel adapters (`FTP`, `SFTP`, and other technologies) are configured with corresponding implementations of `AbstractPersistentFileListFilter` by default, configured with an in-memory `MetadataStore`. To run in a cluster, these can be replaced with filters using a shared `MetadataStore` (see [Metadata Store](./meta-data-store.html#metadata-store) for more information). These filters are used to prevent fetching the same file multiple times (unless it’s modified time changes). Starting with version 5.2, a file is added to the filter immediately before the file is fetched (and reversed if the fetch fails). | |In the event of a catastrophic failure (such as power loss), it is possible that the file currently being fetched will remain in the filter and won’t be re-fetched when restarting the application.
In this case you would need to manually remove this file from the `MetadataStore`.| |---|-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| In previous versions, the files were filtered before any were fetched, meaning that several files could be in this state after a catastrophic failure. In order to facilitate this new behavior, two new methods have been added to `FileListFilter`. ``` boolean accept(F file); boolean supportsSingleFileFiltering(); ``` If a filter returns `true` in `supportsSingleFileFiltering`, it **must** implement `accept()`. If a remote filter does not support single file filtering (such as the `AbstractMarkerFilePresentFileListFilter`), the adapters revert to the previous behavior. If multiple filters are in used (using a `CompositeFileListFilter` or `ChainFileListFilter`), then **all** of the delegate filters must support single file filtering in order for the composite filter to support it. The persistent file list filters now have a boolean property `forRecursion`. Setting this property to `true`, also sets `alwaysAcceptDirectories`, which means that the recursive operation on the outbound gateways (`ls` and `mget`) will now always traverse the full directory tree each time. This is to solve a problem where changes deep in the directory tree were not detected. In addition, `forRecursion=true` causes the full path to files to be used as the metadata store keys; this solves a problem where the filter did not work properly if a file with the same name appears multiple times in different directories. IMPORTANT: This means that existing keys in a persistent metadata store will not be found for files beneath the top level directory. For this reason, the property is `false` by default; this may change in a future release.