提交 7756332f 编写于 作者: T Toshiharu Okada 提交者: David S. Miller

pch_gbe: support ML7831 IOH

Support new device OKI SEMICONDUCTOR ML7831 IOH(Input/Output Hub)

ML7831 is for general purpose use.
ML7831 is companion chip for Intel Atom E6xx series.
ML7831 is completely compatible for Intel EG20T PCH.
Signed-off-by: NToshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 124d770a
......@@ -2535,7 +2535,7 @@ config S6GMAC
source "drivers/net/stmmac/Kconfig"
config PCH_GBE
tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
depends on PCI
select MII
---help---
......@@ -2548,10 +2548,11 @@ config PCH_GBE
This driver enables Gigabit Ethernet function.
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
Output Hub), ML7223.
ML7223 IOH is for MP(Media Phone) use.
ML7223 is companion chip for Intel Atom E6xx series.
ML7223 is completely compatible for Intel EG20T PCH.
Output Hub), ML7223/ML7831.
ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general
purpose use.
ML7223/ML7831 is companion chip for Intel Atom E6xx series.
ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config FTGMAC100
tristate "Faraday FTGMAC100 Gigabit Ethernet support"
......
......@@ -39,6 +39,9 @@ const char pch_driver_version[] = DRV_VERSION;
#define PCI_VENDOR_ID_ROHM 0x10db
#define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013
/* Macros for ML7831 */
#define PCI_DEVICE_ID_ROHM_ML7831_GBE 0x8802
#define PCH_GBE_TX_WEIGHT 64
#define PCH_GBE_RX_WEIGHT 64
#define PCH_GBE_RX_BUFFER_WRITE 16
......@@ -2526,6 +2529,13 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = {
.class = (PCI_CLASS_NETWORK_ETHERNET << 8),
.class_mask = (0xFFFF00)
},
{.vendor = PCI_VENDOR_ID_ROHM,
.device = PCI_DEVICE_ID_ROHM_ML7831_GBE,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
.class = (PCI_CLASS_NETWORK_ETHERNET << 8),
.class_mask = (0xFFFF00)
},
/* required last entry */
{0}
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册