/**************************************************************************//** * @file I2C.h * @version V3.0 * $Revision: 9 $ * $Date: 14/02/10 3:04p $ * @brief M051 Series I2C Driver Header File * * @note * Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved. * ******************************************************************************/ #ifndef __I2C_H__ #define __I2C_H__ #include "M051Series.h" #ifdef __cplusplus extern "C" { #endif /** @addtogroup M051_Device_Driver M051 Device Driver @{ */ /** @addtogroup M051_I2C_Driver I2C Driver @{ */ /** @addtogroup M051_I2C_EXPORTED_CONSTANTS I2C Exported Constants @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* I2CON constant definitions. */ /*---------------------------------------------------------------------------------------------------------*/ #define I2C_I2CON_STA_STO_SI 0x38UL /*!< I2CON setting for I2C control bits. It would set STA, STO and SI bits */ #define I2C_I2CON_STA_STO_SI_AA 0x3CUL /*!< I2CON setting for I2C control bits. It would set STA, STO, SI and AA bits */ #define I2C_I2CON_STA_SI 0x28UL /*!< I2CON setting for I2C control bits. It would set STA and SI bits */ #define I2C_I2CON_STA_SI_AA 0x2CUL /*!< I2CON setting for I2C control bits. It would set STA, SI and AA bits */ #define I2C_I2CON_STO_SI 0x18UL /*!< I2CON setting for I2C control bits. It would set STO and SI bits */ #define I2C_I2CON_STO_SI_AA 0x1CUL /*!< I2CON setting for I2C control bits. It would set STO, SI and AA bits */ #define I2C_I2CON_SI 0x08UL /*!< I2CON setting for I2C control bits. It would set SI bit */ #define I2C_I2CON_SI_AA 0x0CUL /*!< I2CON setting for I2C control bits. It would set SI and AA bits */ #define I2C_I2CON_STA 0x20UL /*!< I2CON setting for I2C control bits. It would set STA bit */ #define I2C_I2CON_STO 0x10UL /*!< I2CON setting for I2C control bits. It would set STO bit */ #define I2C_I2CON_AA 0x04UL /*!< I2CON setting for I2C control bits. It would set AA bit */ /*@}*/ /* end of group M051_I2C_EXPORTED_CONSTANTS */ /** @addtogroup M051_I2C_EXPORTED_FUNCTIONS I2C Exported Functions @{ */ /** * @brief The macro is used to set I2C bus condition at One Time * * @param[in] i2c Specify I2C port * @return None * * @details To control I2C bus conditions of START, STOP, SI, ACK. */ #define I2C_SET_CONTROL_REG(i2c, u8Ctrl) ((i2c)->I2CON = ((i2c)->I2CON & ~0x3c) | u8Ctrl) /** * @brief The macro is used to set START condition of I2C Bus * * @param[in] i2c Specify I2C port * @return None * * @details To set the I2C bus START condition */ #define I2C_START(i2c) ((i2c)->I2CON = ((i2c)->I2CON & ~I2C_I2CON_SI_Msk) | I2C_I2CON_STA_Msk) /** * @brief The macro is used to set STOP condition of I2C Bus * * @param[in] i2c Specify I2C port * @return None * * @details To set the I2C bus STOP condition */ #define I2C_STOP(i2c) ((i2c)->I2CON = ((i2c)->I2CON & ~I2C_I2CON_SI_Msk) | I2C_I2CON_STO_Msk) /** * @brief The macro is used to wait I2C bus status get ready * * @param[in] i2c Specify I2C port * @return None * * @details When a new status is presented of I2C bus, SI flag will be set. */ #define I2C_WAIT_READY(i2c) while(!((i2c)->I2CON & I2C_I2CON_SI_Msk)) /** * @brief The macro is used to Read I2C Bus Data Register * * @param[in] i2c Specify I2C port * @return A byte of I2C data register * * @details I2C controller read data from bus and save it in I2CDAT */ #define I2C_GET_DATA(i2c) ((i2c)->I2CDAT) /** * @brief The macro is used to write a Data to I2C Data Register * * @param[in] i2c Specify I2C port * @return None * * @details I2C controller send a byte data to bus. */ #define I2C_SET_DATA(i2c, u8Data) ((i2c)->I2CDAT = u8Data) /** * @brief The macro is used to get I2C Bus Status Code * * @param[in] i2c Specify I2C port * @return I2C status code * * @details To get ths status code of I2C Bus. */ #define I2C_GET_STATUS(i2c) ((i2c)->I2CSTATUS) /** * @brief The macro is used to get time-out flag * * @param[in] i2c Specify I2C port * @return Time-out flag status * @retval 0 Bus time-out is not happened * @retval 1 Bus time-out is happened * * @details To get time-out flag of I2C bus */ #define I2C_GET_TIMEOUT_FLAG(i2c) ( (i2c->I2CTOC & I2C_I2CTOC_TIF_Msk) == I2C_I2CTOC_TIF_Msk ? 1:0 ) /** * @brief The macro is used to get wake-up flag * * @param[in] i2c Specify I2C port * @return Wake-up flag status * @retval 0 Chip is not woken-up from power-down mode * @retval 1 Chip is woken-up from power-down mode * * @detail To get wake-up status of I2C bus */ #define I2C_GET_WAKEUP_FLAG(i2c) ( ((i2c)->I2CWKUPSTS & I2C_I2CWKUPSTS_WKUPIF_Msk) == I2C_I2CWKUPSTS_WKUPIF_Msk ? 1:0 ) /** * @brief The macro is used to clear wake-up flag * * @param[in] i2c Specify I2C port * @return None * * @detail To clear wake-up flag of I2C bus when wake-up flag is set. */ #define I2C_CLEAR_WAKEUP_FLAG(i2c) ((i2c)->I2CWKUPSTS |= I2C_I2CWKUPSTS_WKUPIF_Msk) void I2C_ClearTimeoutFlag(I2C_T *i2c); void I2C_Close(I2C_T *i2c); void I2C_Trigger(I2C_T *i2c, uint8_t u8Start, uint8_t u8Stop, uint8_t u8Si, uint8_t u8Ack); void I2C_DisableInt(I2C_T *i2c); void I2C_EnableInt(I2C_T *i2c); uint32_t I2C_GetBusClockFreq(I2C_T *i2c); uint32_t I2C_GetIntFlag(I2C_T *i2c); uint32_t I2C_GetStatus(I2C_T *i2c); uint32_t I2C_Open(I2C_T *i2c, uint32_t u32BusClock); uint8_t I2C_GetData(I2C_T *i2c); void I2C_SetSlaveAddr(I2C_T *i2c, uint8_t u8SlaveNo, uint8_t u8SlaveAddr, uint8_t u8GCMode); void I2C_SetSlaveAddrMask(I2C_T *i2c, uint8_t u8SlaveNo, uint8_t u8SlaveAddrMask); uint32_t I2C_SetClockBusFreq(I2C_T *i2c, uint32_t u32BusClock); void I2C_EnableTimeout(I2C_T *i2c, uint8_t u8LongTimeout); void I2C_DisableTimeout(I2C_T *i2c); void I2C_EnableWakeup(I2C_T *i2c); void I2C_DisableWakeup(I2C_T *i2c); void I2C_SetData(I2C_T *i2c, uint8_t u8Data); /*@}*/ /* end of group M051_I2C_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group M051_I2C_Driver */ /*@}*/ /* end of group M051_Device_Driver */ #ifdef __cplusplus } #endif #endif //__I2C_H__