diff --git a/bsp/nrf51822/Libraries/CMSIS/Include/core_cm0.h b/bsp/nrf51822/Libraries/CMSIS/Include/core_cm0.h
new file mode 100644
index 0000000000000000000000000000000000000000..044eb5a613604e43039cc1bf20d50c3e92c88202
--- /dev/null
+++ b/bsp/nrf51822/Libraries/CMSIS/Include/core_cm0.h
@@ -0,0 +1,711 @@
+/**************************************************************************//**
+ * @file core_cm0.h
+ * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File
+ * @version V4.00
+ * @date 22. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#if defined ( __ICCARM__ )
+ #pragma system_include /* treat file as system include file for MISRA check */
+#endif
+
+#ifndef __CORE_CM0_H_GENERIC
+#define __CORE_CM0_H_GENERIC
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/** \page CMSIS_MISRA_Exceptions MISRA-C:2004 Compliance Exceptions
+ CMSIS violates the following MISRA-C:2004 rules:
+
+ \li Required Rule 8.5, object/function definition in header file.
+ Function definitions in header files are used to allow 'inlining'.
+
+ \li Required Rule 18.4, declaration of union type or object of union type: '{...}'.
+ Unions are used for effective representation of core registers.
+
+ \li Advisory Rule 19.7, Function-like macro defined.
+ Function-like macros are used to allow more efficient code.
+ */
+
+
+/*******************************************************************************
+ * CMSIS definitions
+ ******************************************************************************/
+/** \ingroup Cortex_M0
+ @{
+ */
+
+/* CMSIS CM0 definitions */
+#define __CM0_CMSIS_VERSION_MAIN (0x04) /*!< [31:16] CMSIS HAL main version */
+#define __CM0_CMSIS_VERSION_SUB (0x00) /*!< [15:0] CMSIS HAL sub version */
+#define __CM0_CMSIS_VERSION ((__CM0_CMSIS_VERSION_MAIN << 16) | \
+ __CM0_CMSIS_VERSION_SUB ) /*!< CMSIS HAL version number */
+
+#define __CORTEX_M (0x00) /*!< Cortex-M Core */
+
+
+#if defined ( __CC_ARM )
+ #define __ASM __asm /*!< asm keyword for ARM Compiler */
+ #define __INLINE __inline /*!< inline keyword for ARM Compiler */
+ #define __STATIC_INLINE static __inline
+
+#elif defined ( __GNUC__ )
+ #define __ASM __asm /*!< asm keyword for GNU Compiler */
+ #define __INLINE inline /*!< inline keyword for GNU Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __ICCARM__ )
+ #define __ASM __asm /*!< asm keyword for IAR Compiler */
+ #define __INLINE inline /*!< inline keyword for IAR Compiler. Only available in High optimization mode! */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TMS470__ )
+ #define __ASM __asm /*!< asm keyword for TI CCS Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __TASKING__ )
+ #define __ASM __asm /*!< asm keyword for TASKING Compiler */
+ #define __INLINE inline /*!< inline keyword for TASKING Compiler */
+ #define __STATIC_INLINE static inline
+
+#elif defined ( __CSMC__ )
+ #define __packed
+ #define __ASM _asm /*!< asm keyword for COSMIC Compiler */
+ #define __INLINE inline /*use -pc99 on compile line !< inline keyword for COSMIC Compiler */
+ #define __STATIC_INLINE static inline
+
+#endif
+
+/** __FPU_USED indicates whether an FPU is used or not.
+ This core does not support an FPU at all
+*/
+#define __FPU_USED 0
+
+#if defined ( __CC_ARM )
+ #if defined __TARGET_FPU_VFP
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __GNUC__ )
+ #if defined (__VFP_FP__) && !defined(__SOFTFP__)
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __ICCARM__ )
+ #if defined __ARMVFP__
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TMS470__ )
+ #if defined __TI__VFP_SUPPORT____
+ #warning "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __TASKING__ )
+ #if defined __FPU_VFP__
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+
+#elif defined ( __CSMC__ ) /* Cosmic */
+ #if ( __CSMC__ & 0x400) // FPU present for parser
+ #error "Compiler generates FPU instructions for a device without an FPU (check __FPU_PRESENT)"
+ #endif
+#endif
+
+#include /* standard types definitions */
+#include /* Core Instruction Access */
+#include /* Core Function Access */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_GENERIC */
+
+#ifndef __CMSIS_GENERIC
+
+#ifndef __CORE_CM0_H_DEPENDANT
+#define __CORE_CM0_H_DEPENDANT
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* check device defines and use defaults */
+#if defined __CHECK_DEVICE_DEFINES
+ #ifndef __CM0_REV
+ #define __CM0_REV 0x0000
+ #warning "__CM0_REV not defined in device header file; using default!"
+ #endif
+
+ #ifndef __NVIC_PRIO_BITS
+ #define __NVIC_PRIO_BITS 2
+ #warning "__NVIC_PRIO_BITS not defined in device header file; using default!"
+ #endif
+
+ #ifndef __Vendor_SysTickConfig
+ #define __Vendor_SysTickConfig 0
+ #warning "__Vendor_SysTickConfig not defined in device header file; using default!"
+ #endif
+#endif
+
+/* IO definitions (access restrictions to peripheral registers) */
+/**
+ \defgroup CMSIS_glob_defs CMSIS Global Defines
+
+ IO Type Qualifiers are used
+ \li to specify the access to peripheral variables.
+ \li for automatic generation of peripheral register debug information.
+*/
+#ifdef __cplusplus
+ #define __I volatile /*!< Defines 'read only' permissions */
+#else
+ #define __I volatile const /*!< Defines 'read only' permissions */
+#endif
+#define __O volatile /*!< Defines 'write only' permissions */
+#define __IO volatile /*!< Defines 'read / write' permissions */
+
+/*@} end of group Cortex_M0 */
+
+
+
+/*******************************************************************************
+ * Register Abstraction
+ Core Register contain:
+ - Core Register
+ - Core NVIC Register
+ - Core SCB Register
+ - Core SysTick Register
+ ******************************************************************************/
+/** \defgroup CMSIS_core_register Defines and Type Definitions
+ \brief Type definitions and defines for Cortex-M processor based devices.
+*/
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CORE Status and Control Registers
+ \brief Core Register type definitions.
+ @{
+ */
+
+/** \brief Union type to access the Application Program Status Register (APSR).
+ */
+typedef union
+{
+ struct
+ {
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:27; /*!< bit: 0..26 Reserved */
+#else
+ uint32_t _reserved0:16; /*!< bit: 0..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:7; /*!< bit: 20..26 Reserved */
+#endif
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} APSR_Type;
+
+
+/** \brief Union type to access the Interrupt Program Status Register (IPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+ uint32_t _reserved0:23; /*!< bit: 9..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} IPSR_Type;
+
+
+/** \brief Union type to access the Special-Purpose Program Status Registers (xPSR).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t ISR:9; /*!< bit: 0.. 8 Exception number */
+#if (__CORTEX_M != 0x04)
+ uint32_t _reserved0:15; /*!< bit: 9..23 Reserved */
+#else
+ uint32_t _reserved0:7; /*!< bit: 9..15 Reserved */
+ uint32_t GE:4; /*!< bit: 16..19 Greater than or Equal flags */
+ uint32_t _reserved1:4; /*!< bit: 20..23 Reserved */
+#endif
+ uint32_t T:1; /*!< bit: 24 Thumb bit (read 0) */
+ uint32_t IT:2; /*!< bit: 25..26 saved IT state (read 0) */
+ uint32_t Q:1; /*!< bit: 27 Saturation condition flag */
+ uint32_t V:1; /*!< bit: 28 Overflow condition code flag */
+ uint32_t C:1; /*!< bit: 29 Carry condition code flag */
+ uint32_t Z:1; /*!< bit: 30 Zero condition code flag */
+ uint32_t N:1; /*!< bit: 31 Negative condition code flag */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} xPSR_Type;
+
+
+/** \brief Union type to access the Control Registers (CONTROL).
+ */
+typedef union
+{
+ struct
+ {
+ uint32_t nPRIV:1; /*!< bit: 0 Execution privilege in Thread mode */
+ uint32_t SPSEL:1; /*!< bit: 1 Stack to be used */
+ uint32_t FPCA:1; /*!< bit: 2 FP extension active flag */
+ uint32_t _reserved0:29; /*!< bit: 3..31 Reserved */
+ } b; /*!< Structure used for bit access */
+ uint32_t w; /*!< Type used for word access */
+} CONTROL_Type;
+
+/*@} end of group CMSIS_CORE */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_NVIC Nested Vectored Interrupt Controller (NVIC)
+ \brief Type definitions for the NVIC Registers
+ @{
+ */
+
+/** \brief Structure type to access the Nested Vectored Interrupt Controller (NVIC).
+ */
+typedef struct
+{
+ __IO uint32_t ISER[1]; /*!< Offset: 0x000 (R/W) Interrupt Set Enable Register */
+ uint32_t RESERVED0[31];
+ __IO uint32_t ICER[1]; /*!< Offset: 0x080 (R/W) Interrupt Clear Enable Register */
+ uint32_t RSERVED1[31];
+ __IO uint32_t ISPR[1]; /*!< Offset: 0x100 (R/W) Interrupt Set Pending Register */
+ uint32_t RESERVED2[31];
+ __IO uint32_t ICPR[1]; /*!< Offset: 0x180 (R/W) Interrupt Clear Pending Register */
+ uint32_t RESERVED3[31];
+ uint32_t RESERVED4[64];
+ __IO uint32_t IP[8]; /*!< Offset: 0x300 (R/W) Interrupt Priority Register */
+} NVIC_Type;
+
+/*@} end of group CMSIS_NVIC */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SCB System Control Block (SCB)
+ \brief Type definitions for the System Control Block Registers
+ @{
+ */
+
+/** \brief Structure type to access the System Control Block (SCB).
+ */
+typedef struct
+{
+ __I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
+ __IO uint32_t ICSR; /*!< Offset: 0x004 (R/W) Interrupt Control and State Register */
+ uint32_t RESERVED0;
+ __IO uint32_t AIRCR; /*!< Offset: 0x00C (R/W) Application Interrupt and Reset Control Register */
+ __IO uint32_t SCR; /*!< Offset: 0x010 (R/W) System Control Register */
+ __IO uint32_t CCR; /*!< Offset: 0x014 (R/W) Configuration Control Register */
+ uint32_t RESERVED1;
+ __IO uint32_t SHP[2]; /*!< Offset: 0x01C (R/W) System Handlers Priority Registers. [0] is RESERVED */
+ __IO uint32_t SHCSR; /*!< Offset: 0x024 (R/W) System Handler Control and State Register */
+} SCB_Type;
+
+/* SCB CPUID Register Definitions */
+#define SCB_CPUID_IMPLEMENTER_Pos 24 /*!< SCB CPUID: IMPLEMENTER Position */
+#define SCB_CPUID_IMPLEMENTER_Msk (0xFFUL << SCB_CPUID_IMPLEMENTER_Pos) /*!< SCB CPUID: IMPLEMENTER Mask */
+
+#define SCB_CPUID_VARIANT_Pos 20 /*!< SCB CPUID: VARIANT Position */
+#define SCB_CPUID_VARIANT_Msk (0xFUL << SCB_CPUID_VARIANT_Pos) /*!< SCB CPUID: VARIANT Mask */
+
+#define SCB_CPUID_ARCHITECTURE_Pos 16 /*!< SCB CPUID: ARCHITECTURE Position */
+#define SCB_CPUID_ARCHITECTURE_Msk (0xFUL << SCB_CPUID_ARCHITECTURE_Pos) /*!< SCB CPUID: ARCHITECTURE Mask */
+
+#define SCB_CPUID_PARTNO_Pos 4 /*!< SCB CPUID: PARTNO Position */
+#define SCB_CPUID_PARTNO_Msk (0xFFFUL << SCB_CPUID_PARTNO_Pos) /*!< SCB CPUID: PARTNO Mask */
+
+#define SCB_CPUID_REVISION_Pos 0 /*!< SCB CPUID: REVISION Position */
+#define SCB_CPUID_REVISION_Msk (0xFUL << SCB_CPUID_REVISION_Pos) /*!< SCB CPUID: REVISION Mask */
+
+/* SCB Interrupt Control State Register Definitions */
+#define SCB_ICSR_NMIPENDSET_Pos 31 /*!< SCB ICSR: NMIPENDSET Position */
+#define SCB_ICSR_NMIPENDSET_Msk (1UL << SCB_ICSR_NMIPENDSET_Pos) /*!< SCB ICSR: NMIPENDSET Mask */
+
+#define SCB_ICSR_PENDSVSET_Pos 28 /*!< SCB ICSR: PENDSVSET Position */
+#define SCB_ICSR_PENDSVSET_Msk (1UL << SCB_ICSR_PENDSVSET_Pos) /*!< SCB ICSR: PENDSVSET Mask */
+
+#define SCB_ICSR_PENDSVCLR_Pos 27 /*!< SCB ICSR: PENDSVCLR Position */
+#define SCB_ICSR_PENDSVCLR_Msk (1UL << SCB_ICSR_PENDSVCLR_Pos) /*!< SCB ICSR: PENDSVCLR Mask */
+
+#define SCB_ICSR_PENDSTSET_Pos 26 /*!< SCB ICSR: PENDSTSET Position */
+#define SCB_ICSR_PENDSTSET_Msk (1UL << SCB_ICSR_PENDSTSET_Pos) /*!< SCB ICSR: PENDSTSET Mask */
+
+#define SCB_ICSR_PENDSTCLR_Pos 25 /*!< SCB ICSR: PENDSTCLR Position */
+#define SCB_ICSR_PENDSTCLR_Msk (1UL << SCB_ICSR_PENDSTCLR_Pos) /*!< SCB ICSR: PENDSTCLR Mask */
+
+#define SCB_ICSR_ISRPREEMPT_Pos 23 /*!< SCB ICSR: ISRPREEMPT Position */
+#define SCB_ICSR_ISRPREEMPT_Msk (1UL << SCB_ICSR_ISRPREEMPT_Pos) /*!< SCB ICSR: ISRPREEMPT Mask */
+
+#define SCB_ICSR_ISRPENDING_Pos 22 /*!< SCB ICSR: ISRPENDING Position */
+#define SCB_ICSR_ISRPENDING_Msk (1UL << SCB_ICSR_ISRPENDING_Pos) /*!< SCB ICSR: ISRPENDING Mask */
+
+#define SCB_ICSR_VECTPENDING_Pos 12 /*!< SCB ICSR: VECTPENDING Position */
+#define SCB_ICSR_VECTPENDING_Msk (0x1FFUL << SCB_ICSR_VECTPENDING_Pos) /*!< SCB ICSR: VECTPENDING Mask */
+
+#define SCB_ICSR_VECTACTIVE_Pos 0 /*!< SCB ICSR: VECTACTIVE Position */
+#define SCB_ICSR_VECTACTIVE_Msk (0x1FFUL << SCB_ICSR_VECTACTIVE_Pos) /*!< SCB ICSR: VECTACTIVE Mask */
+
+/* SCB Application Interrupt and Reset Control Register Definitions */
+#define SCB_AIRCR_VECTKEY_Pos 16 /*!< SCB AIRCR: VECTKEY Position */
+#define SCB_AIRCR_VECTKEY_Msk (0xFFFFUL << SCB_AIRCR_VECTKEY_Pos) /*!< SCB AIRCR: VECTKEY Mask */
+
+#define SCB_AIRCR_VECTKEYSTAT_Pos 16 /*!< SCB AIRCR: VECTKEYSTAT Position */
+#define SCB_AIRCR_VECTKEYSTAT_Msk (0xFFFFUL << SCB_AIRCR_VECTKEYSTAT_Pos) /*!< SCB AIRCR: VECTKEYSTAT Mask */
+
+#define SCB_AIRCR_ENDIANESS_Pos 15 /*!< SCB AIRCR: ENDIANESS Position */
+#define SCB_AIRCR_ENDIANESS_Msk (1UL << SCB_AIRCR_ENDIANESS_Pos) /*!< SCB AIRCR: ENDIANESS Mask */
+
+#define SCB_AIRCR_SYSRESETREQ_Pos 2 /*!< SCB AIRCR: SYSRESETREQ Position */
+#define SCB_AIRCR_SYSRESETREQ_Msk (1UL << SCB_AIRCR_SYSRESETREQ_Pos) /*!< SCB AIRCR: SYSRESETREQ Mask */
+
+#define SCB_AIRCR_VECTCLRACTIVE_Pos 1 /*!< SCB AIRCR: VECTCLRACTIVE Position */
+#define SCB_AIRCR_VECTCLRACTIVE_Msk (1UL << SCB_AIRCR_VECTCLRACTIVE_Pos) /*!< SCB AIRCR: VECTCLRACTIVE Mask */
+
+/* SCB System Control Register Definitions */
+#define SCB_SCR_SEVONPEND_Pos 4 /*!< SCB SCR: SEVONPEND Position */
+#define SCB_SCR_SEVONPEND_Msk (1UL << SCB_SCR_SEVONPEND_Pos) /*!< SCB SCR: SEVONPEND Mask */
+
+#define SCB_SCR_SLEEPDEEP_Pos 2 /*!< SCB SCR: SLEEPDEEP Position */
+#define SCB_SCR_SLEEPDEEP_Msk (1UL << SCB_SCR_SLEEPDEEP_Pos) /*!< SCB SCR: SLEEPDEEP Mask */
+
+#define SCB_SCR_SLEEPONEXIT_Pos 1 /*!< SCB SCR: SLEEPONEXIT Position */
+#define SCB_SCR_SLEEPONEXIT_Msk (1UL << SCB_SCR_SLEEPONEXIT_Pos) /*!< SCB SCR: SLEEPONEXIT Mask */
+
+/* SCB Configuration Control Register Definitions */
+#define SCB_CCR_STKALIGN_Pos 9 /*!< SCB CCR: STKALIGN Position */
+#define SCB_CCR_STKALIGN_Msk (1UL << SCB_CCR_STKALIGN_Pos) /*!< SCB CCR: STKALIGN Mask */
+
+#define SCB_CCR_UNALIGN_TRP_Pos 3 /*!< SCB CCR: UNALIGN_TRP Position */
+#define SCB_CCR_UNALIGN_TRP_Msk (1UL << SCB_CCR_UNALIGN_TRP_Pos) /*!< SCB CCR: UNALIGN_TRP Mask */
+
+/* SCB System Handler Control and State Register Definitions */
+#define SCB_SHCSR_SVCALLPENDED_Pos 15 /*!< SCB SHCSR: SVCALLPENDED Position */
+#define SCB_SHCSR_SVCALLPENDED_Msk (1UL << SCB_SHCSR_SVCALLPENDED_Pos) /*!< SCB SHCSR: SVCALLPENDED Mask */
+
+/*@} end of group CMSIS_SCB */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_SysTick System Tick Timer (SysTick)
+ \brief Type definitions for the System Timer Registers.
+ @{
+ */
+
+/** \brief Structure type to access the System Timer (SysTick).
+ */
+typedef struct
+{
+ __IO uint32_t CTRL; /*!< Offset: 0x000 (R/W) SysTick Control and Status Register */
+ __IO uint32_t LOAD; /*!< Offset: 0x004 (R/W) SysTick Reload Value Register */
+ __IO uint32_t VAL; /*!< Offset: 0x008 (R/W) SysTick Current Value Register */
+ __I uint32_t CALIB; /*!< Offset: 0x00C (R/ ) SysTick Calibration Register */
+} SysTick_Type;
+
+/* SysTick Control / Status Register Definitions */
+#define SysTick_CTRL_COUNTFLAG_Pos 16 /*!< SysTick CTRL: COUNTFLAG Position */
+#define SysTick_CTRL_COUNTFLAG_Msk (1UL << SysTick_CTRL_COUNTFLAG_Pos) /*!< SysTick CTRL: COUNTFLAG Mask */
+
+#define SysTick_CTRL_CLKSOURCE_Pos 2 /*!< SysTick CTRL: CLKSOURCE Position */
+#define SysTick_CTRL_CLKSOURCE_Msk (1UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< SysTick CTRL: CLKSOURCE Mask */
+
+#define SysTick_CTRL_TICKINT_Pos 1 /*!< SysTick CTRL: TICKINT Position */
+#define SysTick_CTRL_TICKINT_Msk (1UL << SysTick_CTRL_TICKINT_Pos) /*!< SysTick CTRL: TICKINT Mask */
+
+#define SysTick_CTRL_ENABLE_Pos 0 /*!< SysTick CTRL: ENABLE Position */
+#define SysTick_CTRL_ENABLE_Msk (1UL << SysTick_CTRL_ENABLE_Pos) /*!< SysTick CTRL: ENABLE Mask */
+
+/* SysTick Reload Register Definitions */
+#define SysTick_LOAD_RELOAD_Pos 0 /*!< SysTick LOAD: RELOAD Position */
+#define SysTick_LOAD_RELOAD_Msk (0xFFFFFFUL << SysTick_LOAD_RELOAD_Pos) /*!< SysTick LOAD: RELOAD Mask */
+
+/* SysTick Current Register Definitions */
+#define SysTick_VAL_CURRENT_Pos 0 /*!< SysTick VAL: CURRENT Position */
+#define SysTick_VAL_CURRENT_Msk (0xFFFFFFUL << SysTick_VAL_CURRENT_Pos) /*!< SysTick VAL: CURRENT Mask */
+
+/* SysTick Calibration Register Definitions */
+#define SysTick_CALIB_NOREF_Pos 31 /*!< SysTick CALIB: NOREF Position */
+#define SysTick_CALIB_NOREF_Msk (1UL << SysTick_CALIB_NOREF_Pos) /*!< SysTick CALIB: NOREF Mask */
+
+#define SysTick_CALIB_SKEW_Pos 30 /*!< SysTick CALIB: SKEW Position */
+#define SysTick_CALIB_SKEW_Msk (1UL << SysTick_CALIB_SKEW_Pos) /*!< SysTick CALIB: SKEW Mask */
+
+#define SysTick_CALIB_TENMS_Pos 0 /*!< SysTick CALIB: TENMS Position */
+#define SysTick_CALIB_TENMS_Msk (0xFFFFFFUL << SysTick_CALIB_TENMS_Pos) /*!< SysTick CALIB: TENMS Mask */
+
+/*@} end of group CMSIS_SysTick */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_CoreDebug Core Debug Registers (CoreDebug)
+ \brief Cortex-M0 Core Debug Registers (DCB registers, SHCSR, and DFSR)
+ are only accessible over DAP and not via processor. Therefore
+ they are not covered by the Cortex-M0 header file.
+ @{
+ */
+/*@} end of group CMSIS_CoreDebug */
+
+
+/** \ingroup CMSIS_core_register
+ \defgroup CMSIS_core_base Core Definitions
+ \brief Definitions for base addresses, unions, and structures.
+ @{
+ */
+
+/* Memory mapping of Cortex-M0 Hardware */
+#define SCS_BASE (0xE000E000UL) /*!< System Control Space Base Address */
+#define SysTick_BASE (SCS_BASE + 0x0010UL) /*!< SysTick Base Address */
+#define NVIC_BASE (SCS_BASE + 0x0100UL) /*!< NVIC Base Address */
+#define SCB_BASE (SCS_BASE + 0x0D00UL) /*!< System Control Block Base Address */
+
+#define SCB ((SCB_Type *) SCB_BASE ) /*!< SCB configuration struct */
+#define SysTick ((SysTick_Type *) SysTick_BASE ) /*!< SysTick configuration struct */
+#define NVIC ((NVIC_Type *) NVIC_BASE ) /*!< NVIC configuration struct */
+
+
+/*@} */
+
+
+
+/*******************************************************************************
+ * Hardware Abstraction Layer
+ Core Function Interface contains:
+ - Core NVIC Functions
+ - Core SysTick Functions
+ - Core Register Access Functions
+ ******************************************************************************/
+/** \defgroup CMSIS_Core_FunctionInterface Functions and Instructions Reference
+*/
+
+
+
+/* ########################## NVIC functions #################################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_NVICFunctions NVIC Functions
+ \brief Functions that manage interrupts and exceptions via the NVIC.
+ @{
+ */
+
+/* Interrupt Priorities are WORD accessible only under ARMv6M */
+/* The following MACROS handle generation of the register offset and byte masks */
+#define _BIT_SHIFT(IRQn) ( (((uint32_t)(IRQn) ) & 0x03) * 8 )
+#define _SHP_IDX(IRQn) ( ((((uint32_t)(IRQn) & 0x0F)-8) >> 2) )
+#define _IP_IDX(IRQn) ( ((uint32_t)(IRQn) >> 2) )
+
+
+/** \brief Enable External Interrupt
+
+ The function enables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Disable External Interrupt
+
+ The function disables a device-specific interrupt in the NVIC interrupt controller.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICER[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Get Pending Interrupt
+
+ The function reads the pending register in the NVIC and returns the pending bit
+ for the specified interrupt.
+
+ \param [in] IRQn Interrupt number.
+
+ \return 0 Interrupt status is not pending.
+ \return 1 Interrupt status is pending.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+ return((uint32_t) ((NVIC->ISPR[0] & (1 << ((uint32_t)(IRQn) & 0x1F)))?1:0));
+}
+
+
+/** \brief Set Pending Interrupt
+
+ The function sets the pending bit of an external interrupt.
+
+ \param [in] IRQn Interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ISPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F));
+}
+
+
+/** \brief Clear Pending Interrupt
+
+ The function clears the pending bit of an external interrupt.
+
+ \param [in] IRQn External interrupt number. Value cannot be negative.
+ */
+__STATIC_INLINE void NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+ NVIC->ICPR[0] = (1 << ((uint32_t)(IRQn) & 0x1F)); /* Clear pending interrupt */
+}
+
+
+/** \brief Set Interrupt Priority
+
+ The function sets the priority of an interrupt.
+
+ \note The priority cannot be set for every core interrupt.
+
+ \param [in] IRQn Interrupt number.
+ \param [in] priority Priority to set.
+ */
+__STATIC_INLINE void NVIC_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+ if(IRQn < 0) {
+ SCB->SHP[_SHP_IDX(IRQn)] = (SCB->SHP[_SHP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+ else {
+ NVIC->IP[_IP_IDX(IRQn)] = (NVIC->IP[_IP_IDX(IRQn)] & ~(0xFF << _BIT_SHIFT(IRQn))) |
+ (((priority << (8 - __NVIC_PRIO_BITS)) & 0xFF) << _BIT_SHIFT(IRQn)); }
+}
+
+
+/** \brief Get Interrupt Priority
+
+ The function reads the priority of an interrupt. The interrupt
+ number can be positive to specify an external (device specific)
+ interrupt, or negative to specify an internal (core) interrupt.
+
+
+ \param [in] IRQn Interrupt number.
+ \return Interrupt Priority. Value is aligned automatically to the implemented
+ priority bits of the microcontroller.
+ */
+__STATIC_INLINE uint32_t NVIC_GetPriority(IRQn_Type IRQn)
+{
+
+ if(IRQn < 0) {
+ return((uint32_t)(((SCB->SHP[_SHP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for Cortex-M0 system interrupts */
+ else {
+ return((uint32_t)(((NVIC->IP[ _IP_IDX(IRQn)] >> _BIT_SHIFT(IRQn) ) & 0xFF) >> (8 - __NVIC_PRIO_BITS))); } /* get priority for device specific interrupts */
+}
+
+
+/** \brief System Reset
+
+ The function initiates a system reset request to reset the MCU.
+ */
+__STATIC_INLINE void NVIC_SystemReset(void)
+{
+ __DSB(); /* Ensure all outstanding memory accesses included
+ buffered write are completed before reset */
+ SCB->AIRCR = ((0x5FA << SCB_AIRCR_VECTKEY_Pos) |
+ SCB_AIRCR_SYSRESETREQ_Msk);
+ __DSB(); /* Ensure completion of memory access */
+ while(1); /* wait until reset */
+}
+
+/*@} end of CMSIS_Core_NVICFunctions */
+
+
+
+/* ################################## SysTick function ############################################ */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_SysTickFunctions SysTick Functions
+ \brief Functions that configure the System.
+ @{
+ */
+
+#if (__Vendor_SysTickConfig == 0)
+
+/** \brief System Tick Configuration
+
+ The function initializes the System Timer and its interrupt, and starts the System Tick Timer.
+ Counter is in free running mode to generate periodic interrupts.
+
+ \param [in] ticks Number of ticks between two interrupts.
+
+ \return 0 Function succeeded.
+ \return 1 Function failed.
+
+ \note When the variable __Vendor_SysTickConfig is set to 1, then the
+ function SysTick_Config is not included. In this case, the file device.h
+ must contain a vendor-specific implementation of this function.
+
+ */
+__STATIC_INLINE uint32_t SysTick_Config(uint32_t ticks)
+{
+ if ((ticks - 1) > SysTick_LOAD_RELOAD_Msk) return (1); /* Reload value impossible */
+
+ SysTick->LOAD = ticks - 1; /* set reload register */
+ NVIC_SetPriority (SysTick_IRQn, (1<<__NVIC_PRIO_BITS) - 1); /* set Priority for Systick Interrupt */
+ SysTick->VAL = 0; /* Load the SysTick Counter Value */
+ SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
+ SysTick_CTRL_TICKINT_Msk |
+ SysTick_CTRL_ENABLE_Msk; /* Enable SysTick IRQ and SysTick Timer */
+ return (0); /* Function successful */
+}
+
+#endif
+
+/*@} end of CMSIS_Core_SysTickFunctions */
+
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __CORE_CM0_H_DEPENDANT */
+
+#endif /* __CMSIS_GENERIC */
diff --git a/bsp/nrf51822/Libraries/CMSIS/Include/core_cmFunc.h b/bsp/nrf51822/Libraries/CMSIS/Include/core_cmFunc.h
new file mode 100644
index 0000000000000000000000000000000000000000..01089f1333bd097ac99868e007c84e1cb6ef85a6
--- /dev/null
+++ b/bsp/nrf51822/Libraries/CMSIS/Include/core_cmFunc.h
@@ -0,0 +1,637 @@
+/**************************************************************************//**
+ * @file core_cmFunc.h
+ * @brief CMSIS Cortex-M Core Function Access Header File
+ * @version V4.00
+ * @date 28. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMFUNC_H
+#define __CORE_CMFUNC_H
+
+
+/* ########################### Core Function Access ########################### */
+/** \ingroup CMSIS_Core_FunctionInterface
+ \defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
+ @{
+ */
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+/* intrinsic void __enable_irq(); */
+/* intrinsic void __disable_irq(); */
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ register uint32_t __regControl __ASM("control");
+ return(__regControl);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ register uint32_t __regControl __ASM("control");
+ __regControl = control;
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ register uint32_t __regIPSR __ASM("ipsr");
+ return(__regIPSR);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__STATIC_INLINE uint32_t __get_APSR(void)
+{
+ register uint32_t __regAPSR __ASM("apsr");
+ return(__regAPSR);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ register uint32_t __regXPSR __ASM("xpsr");
+ return(__regXPSR);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ return(__regProcessStackPointer);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ register uint32_t __regProcessStackPointer __ASM("psp");
+ __regProcessStackPointer = topOfProcStack;
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ return(__regMainStackPointer);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ register uint32_t __regMainStackPointer __ASM("msp");
+ __regMainStackPointer = topOfMainStack;
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ return(__regPriMask);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ register uint32_t __regPriMask __ASM("primask");
+ __regPriMask = (priMask);
+}
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __enable_fault_irq __enable_fiq
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+#define __disable_fault_irq __disable_fiq
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ return(__regBasePri);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
+{
+ register uint32_t __regBasePri __ASM("basepri");
+ __regBasePri = (basePri & 0xff);
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ return(__regFaultMask);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ register uint32_t __regFaultMask __ASM("faultmask");
+ __regFaultMask = (faultMask & (uint32_t)1);
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ return(__regfpscr);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ register uint32_t __regfpscr __ASM("fpscr");
+ __regfpscr = (fpscr);
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/** \brief Enable IRQ Interrupts
+
+ This function enables IRQ interrupts by clearing the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_irq(void)
+{
+ __ASM volatile ("cpsie i" : : : "memory");
+}
+
+
+/** \brief Disable IRQ Interrupts
+
+ This function disables IRQ interrupts by setting the I-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_irq(void)
+{
+ __ASM volatile ("cpsid i" : : : "memory");
+}
+
+
+/** \brief Get Control Register
+
+ This function returns the content of the Control Register.
+
+ \return Control Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_CONTROL(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, control" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Control Register
+
+ This function writes the given value to the Control Register.
+
+ \param [in] control Control Register value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_CONTROL(uint32_t control)
+{
+ __ASM volatile ("MSR control, %0" : : "r" (control) : "memory");
+}
+
+
+/** \brief Get IPSR Register
+
+ This function returns the content of the IPSR Register.
+
+ \return IPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_IPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, ipsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get APSR Register
+
+ This function returns the content of the APSR Register.
+
+ \return APSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_APSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, apsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get xPSR Register
+
+ This function returns the content of the xPSR Register.
+
+ \return xPSR Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_xPSR(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, xpsr" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Get Process Stack Pointer
+
+ This function returns the current value of the Process Stack Pointer (PSP).
+
+ \return PSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, psp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Process Stack Pointer
+
+ This function assigns the given value to the Process Stack Pointer (PSP).
+
+ \param [in] topOfProcStack Process Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
+{
+ __ASM volatile ("MSR psp, %0\n" : : "r" (topOfProcStack) : "sp");
+}
+
+
+/** \brief Get Main Stack Pointer
+
+ This function returns the current value of the Main Stack Pointer (MSP).
+
+ \return MSP Register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_MSP(void)
+{
+ register uint32_t result;
+
+ __ASM volatile ("MRS %0, msp\n" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Main Stack Pointer
+
+ This function assigns the given value to the Main Stack Pointer (MSP).
+
+ \param [in] topOfMainStack Main Stack Pointer value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
+{
+ __ASM volatile ("MSR msp, %0\n" : : "r" (topOfMainStack) : "sp");
+}
+
+
+/** \brief Get Priority Mask
+
+ This function returns the current state of the priority mask bit from the Priority Mask Register.
+
+ \return Priority Mask value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_PRIMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, primask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Priority Mask
+
+ This function assigns the given value to the Priority Mask Register.
+
+ \param [in] priMask Priority Mask
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
+{
+ __ASM volatile ("MSR primask, %0" : : "r" (priMask) : "memory");
+}
+
+
+#if (__CORTEX_M >= 0x03)
+
+/** \brief Enable FIQ
+
+ This function enables FIQ interrupts by clearing the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __enable_fault_irq(void)
+{
+ __ASM volatile ("cpsie f" : : : "memory");
+}
+
+
+/** \brief Disable FIQ
+
+ This function disables FIQ interrupts by setting the F-bit in the CPSR.
+ Can only be executed in Privileged modes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __disable_fault_irq(void)
+{
+ __ASM volatile ("cpsid f" : : : "memory");
+}
+
+
+/** \brief Get Base Priority
+
+ This function returns the current value of the Base Priority register.
+
+ \return Base Priority register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_BASEPRI(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, basepri_max" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Base Priority
+
+ This function assigns the given value to the Base Priority register.
+
+ \param [in] basePri Base Priority value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_BASEPRI(uint32_t value)
+{
+ __ASM volatile ("MSR basepri, %0" : : "r" (value) : "memory");
+}
+
+
+/** \brief Get Fault Mask
+
+ This function returns the current value of the Fault Mask register.
+
+ \return Fault Mask register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FAULTMASK(void)
+{
+ uint32_t result;
+
+ __ASM volatile ("MRS %0, faultmask" : "=r" (result) );
+ return(result);
+}
+
+
+/** \brief Set Fault Mask
+
+ This function assigns the given value to the Fault Mask register.
+
+ \param [in] faultMask Fault Mask value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
+{
+ __ASM volatile ("MSR faultmask, %0" : : "r" (faultMask) : "memory");
+}
+
+#endif /* (__CORTEX_M >= 0x03) */
+
+
+#if (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07)
+
+/** \brief Get FPSCR
+
+ This function returns the current value of the Floating Point Status/Control register.
+
+ \return Floating Point Status/Control register value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __get_FPSCR(void)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ uint32_t result;
+
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMRS %0, fpscr" : "=r" (result) );
+ __ASM volatile ("");
+ return(result);
+#else
+ return(0);
+#endif
+}
+
+
+/** \brief Set FPSCR
+
+ This function assigns the given value to the Floating Point Status/Control register.
+
+ \param [in] fpscr Floating Point Status/Control value to set
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
+{
+#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+ /* Empty asm statement works as a scheduling barrier */
+ __ASM volatile ("");
+ __ASM volatile ("VMSR fpscr, %0" : : "r" (fpscr) : "vfpcc");
+ __ASM volatile ("");
+#endif
+}
+
+#endif /* (__CORTEX_M == 0x04) || (__CORTEX_M == 0x07) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include
+
+#endif
+
+/*@} end of CMSIS_Core_RegAccFunctions */
+
+#endif /* __CORE_CMFUNC_H */
diff --git a/bsp/nrf51822/Libraries/CMSIS/Include/core_cmInstr.h b/bsp/nrf51822/Libraries/CMSIS/Include/core_cmInstr.h
new file mode 100644
index 0000000000000000000000000000000000000000..d14110b2abd16c8d93acece894985d4fe2841cb0
--- /dev/null
+++ b/bsp/nrf51822/Libraries/CMSIS/Include/core_cmInstr.h
@@ -0,0 +1,880 @@
+/**************************************************************************//**
+ * @file core_cmInstr.h
+ * @brief CMSIS Cortex-M Core Instruction Access Header File
+ * @version V4.00
+ * @date 28. August 2014
+ *
+ * @note
+ *
+ ******************************************************************************/
+/* Copyright (c) 2009 - 2014 ARM LIMITED
+
+ All rights reserved.
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ - Neither the name of ARM nor the names of its contributors may be used
+ to endorse or promote products derived from this software without
+ specific prior written permission.
+ *
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+ ---------------------------------------------------------------------------*/
+
+
+#ifndef __CORE_CMINSTR_H
+#define __CORE_CMINSTR_H
+
+
+/* ########################## Core Instruction Access ######################### */
+/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
+ Access to dedicated instructions
+ @{
+*/
+
+#if defined ( __CC_ARM ) /*------------------RealView Compiler -----------------*/
+/* ARM armcc specific functions */
+
+#if (__ARMCC_VERSION < 400677)
+ #error "Please use ARM Compiler Toolchain V4.0.677 or later!"
+#endif
+
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+#define __NOP __nop
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+#define __WFI __wfi
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+#define __WFE __wfe
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+#define __SEV __sev
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+#define __ISB() __isb(0xF)
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+#define __DSB() __dsb(0xF)
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+#define __DMB() __dmb(0xF)
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __REV __rev
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
+{
+ rev16 r0, r0
+ bx lr
+}
+#endif
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int32_t __REVSH(int32_t value)
+{
+ revsh r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+#define __ROR __ror
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __breakpoint(value)
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+#define __RBIT __rbit
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function executes a exclusive LDR instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function executes a exclusive LDR instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function executes a exclusive LDR instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function executes a exclusive STR instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXB(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function executes a exclusive STR instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXH(value, ptr) __strex(value, ptr)
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function executes a exclusive STR instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+#define __STREXW(value, ptr) __strex(value, ptr)
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+#define __CLREX __clrex
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT __ssat
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT __usat
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+#define __CLZ __clz
+
+
+/** \brief Rotate Right with Extend (32 bit)
+
+ This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring.
+
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+#ifndef __NO_EMBEDDED_ASM
+__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
+{
+ rrx r0, r0
+ bx lr
+}
+#endif
+
+
+/** \brief LDRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
+
+
+/** \brief LDRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
+
+
+/** \brief LDRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
+
+
+/** \brief STRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged STRT instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRBT(value, ptr) __strt(value, ptr)
+
+
+/** \brief STRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged STRT instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRHT(value, ptr) __strt(value, ptr)
+
+
+/** \brief STRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged STRT instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+#define __STRT(value, ptr) __strt(value, ptr)
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __GNUC__ ) /*------------------ GNU Compiler ---------------------*/
+/* GNU gcc specific functions */
+
+/* Define macros for porting to both thumb1 and thumb2.
+ * For thumb1, use low register (r0-r7), specified by constrant "l"
+ * Otherwise, use general registers, specified by constrant "r" */
+#if defined (__thumb__) && !defined (__thumb2__)
+#define __CMSIS_GCC_OUT_REG(r) "=l" (r)
+#define __CMSIS_GCC_USE_REG(r) "l" (r)
+#else
+#define __CMSIS_GCC_OUT_REG(r) "=r" (r)
+#define __CMSIS_GCC_USE_REG(r) "r" (r)
+#endif
+
+/** \brief No Operation
+
+ No Operation does nothing. This instruction can be used for code alignment purposes.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __NOP(void)
+{
+ __ASM volatile ("nop");
+}
+
+
+/** \brief Wait For Interrupt
+
+ Wait For Interrupt is a hint instruction that suspends execution
+ until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFI(void)
+{
+ __ASM volatile ("wfi");
+}
+
+
+/** \brief Wait For Event
+
+ Wait For Event is a hint instruction that permits the processor to enter
+ a low-power state until one of a number of events occurs.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __WFE(void)
+{
+ __ASM volatile ("wfe");
+}
+
+
+/** \brief Send Event
+
+ Send Event is a hint instruction. It causes an event to be signaled to the CPU.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __SEV(void)
+{
+ __ASM volatile ("sev");
+}
+
+
+/** \brief Instruction Synchronization Barrier
+
+ Instruction Synchronization Barrier flushes the pipeline in the processor,
+ so that all instructions following the ISB are fetched from cache or
+ memory, after the instruction has been completed.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __ISB(void)
+{
+ __ASM volatile ("isb");
+}
+
+
+/** \brief Data Synchronization Barrier
+
+ This function acts as a special kind of Data Memory Barrier.
+ It completes when all explicit memory accesses before this instruction complete.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DSB(void)
+{
+ __ASM volatile ("dsb");
+}
+
+
+/** \brief Data Memory Barrier
+
+ This function ensures the apparent order of the explicit memory operations before
+ and after the instruction, without ensuring their completion.
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __DMB(void)
+{
+ __ASM volatile ("dmb");
+}
+
+
+/** \brief Reverse byte order (32 bit)
+
+ This function reverses the byte order in integer value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV(uint32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)
+ return __builtin_bswap32(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("rev %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Reverse byte order (16 bit)
+
+ This function reverses the byte order in two unsigned short values.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __REV16(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rev16 %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief Reverse byte order in signed short value
+
+ This function reverses the byte order in a signed short value with sign extension to integer.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE int32_t __REVSH(int32_t value)
+{
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ return (short)__builtin_bswap16(value);
+#else
+ uint32_t result;
+
+ __ASM volatile ("revsh %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+#endif
+}
+
+
+/** \brief Rotate Right in unsigned value (32 bit)
+
+ This function Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
+
+ \param [in] value Value to rotate
+ \param [in] value Number of Bits to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __ROR(uint32_t op1, uint32_t op2)
+{
+ return (op1 >> op2) | (op1 << (32 - op2));
+}
+
+
+/** \brief Breakpoint
+
+ This function causes the processor to enter Debug state.
+ Debug tools can use this to investigate system state when the instruction at a particular address is reached.
+
+ \param [in] value is ignored by the processor.
+ If required, a debugger can use it to store additional information about the breakpoint.
+ */
+#define __BKPT(value) __ASM volatile ("bkpt "#value)
+
+
+#if (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300)
+
+/** \brief Reverse bit order of value
+
+ This function reverses the bit order of the given value.
+
+ \param [in] value Value to reverse
+ \return Reversed value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rbit %0, %1" : "=r" (result) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief LDR Exclusive (8 bit)
+
+ This function executes a exclusive LDR instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDREXB(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexb %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexb %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDR Exclusive (16 bit)
+
+ This function executes a exclusive LDR instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDREXH(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrexh %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrexh %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDR Exclusive (32 bit)
+
+ This function executes a exclusive LDR instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDREXW(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrex %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (8 bit)
+
+ This function executes a exclusive STR instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXB(uint8_t value, volatile uint8_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexb %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (16 bit)
+
+ This function executes a exclusive STR instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXH(uint16_t value, volatile uint16_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strexh %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" ((uint32_t)value) );
+ return(result);
+}
+
+
+/** \brief STR Exclusive (32 bit)
+
+ This function executes a exclusive STR instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ \return 0 Function succeeded
+ \return 1 Function failed
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __STREXW(uint32_t value, volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("strex %0, %2, %1" : "=&r" (result), "=Q" (*addr) : "r" (value) );
+ return(result);
+}
+
+
+/** \brief Remove the exclusive lock
+
+ This function removes the exclusive lock which is created by LDREX.
+
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __CLREX(void)
+{
+ __ASM volatile ("clrex" ::: "memory");
+}
+
+
+/** \brief Signed Saturate
+
+ This function saturates a signed value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (1..32)
+ \return Saturated value
+ */
+#define __SSAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("ssat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Unsigned Saturate
+
+ This function saturates an unsigned value.
+
+ \param [in] value Value to be saturated
+ \param [in] sat Bit position to saturate to (0..31)
+ \return Saturated value
+ */
+#define __USAT(ARG1,ARG2) \
+({ \
+ uint32_t __RES, __ARG1 = (ARG1); \
+ __ASM ("usat %0, %1, %2" : "=r" (__RES) : "I" (ARG2), "r" (__ARG1) ); \
+ __RES; \
+ })
+
+
+/** \brief Count leading zeros
+
+ This function counts the number of leading zeros of a data value.
+
+ \param [in] value Value to count the leading zeros
+ \return number of leading zeros in value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __CLZ(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("clz %0, %1" : "=r" (result) : "r" (value) );
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief Rotate Right with Extend (32 bit)
+
+ This function moves each bit of a bitstring right by one bit. The carry input is shifted in at the left end of the bitstring.
+
+ \param [in] value Value to rotate
+ \return Rotated value
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __RRX(uint32_t value)
+{
+ uint32_t result;
+
+ __ASM volatile ("rrx %0, %1" : __CMSIS_GCC_OUT_REG (result) : __CMSIS_GCC_USE_REG (value) );
+ return(result);
+}
+
+
+/** \brief LDRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged LDRT instruction for 8 bit value.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint8_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint8_t __LDRBT(volatile uint8_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrbt %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrbt %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint8_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged LDRT instruction for 16 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint16_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint16_t __LDRHT(volatile uint16_t *addr)
+{
+ uint32_t result;
+
+#if (__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8)
+ __ASM volatile ("ldrht %0, %1" : "=r" (result) : "Q" (*addr) );
+#else
+ /* Prior to GCC 4.8, "Q" will be expanded to [rx, #0] which is not
+ accepted by assembler. So has to use following less efficient pattern.
+ */
+ __ASM volatile ("ldrht %0, [%1]" : "=r" (result) : "r" (addr) : "memory" );
+#endif
+ return ((uint16_t) result); /* Add explicit type cast here */
+}
+
+
+/** \brief LDRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged LDRT instruction for 32 bit values.
+
+ \param [in] ptr Pointer to data
+ \return value of type uint32_t at (*ptr)
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE uint32_t __LDRT(volatile uint32_t *addr)
+{
+ uint32_t result;
+
+ __ASM volatile ("ldrt %0, %1" : "=r" (result) : "Q" (*addr) );
+ return(result);
+}
+
+
+/** \brief STRT Unprivileged (8 bit)
+
+ This function executes a Unprivileged STRT instruction for 8 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRBT(uint8_t value, volatile uint8_t *addr)
+{
+ __ASM volatile ("strbt %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief STRT Unprivileged (16 bit)
+
+ This function executes a Unprivileged STRT instruction for 16 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRHT(uint16_t value, volatile uint16_t *addr)
+{
+ __ASM volatile ("strht %1, %0" : "=Q" (*addr) : "r" ((uint32_t)value) );
+}
+
+
+/** \brief STRT Unprivileged (32 bit)
+
+ This function executes a Unprivileged STRT instruction for 32 bit values.
+
+ \param [in] value Value to store
+ \param [in] ptr Pointer to location
+ */
+__attribute__( ( always_inline ) ) __STATIC_INLINE void __STRT(uint32_t value, volatile uint32_t *addr)
+{
+ __ASM volatile ("strt %1, %0" : "=Q" (*addr) : "r" (value) );
+}
+
+#endif /* (__CORTEX_M >= 0x03) || (__CORTEX_SC >= 300) */
+
+
+#elif defined ( __ICCARM__ ) /*------------------ ICC Compiler -------------------*/
+/* IAR iccarm specific functions */
+#include
+
+
+#elif defined ( __TMS470__ ) /*---------------- TI CCS Compiler ------------------*/
+/* TI CCS specific functions */
+#include
+
+
+#elif defined ( __TASKING__ ) /*------------------ TASKING Compiler --------------*/
+/* TASKING carm specific functions */
+/*
+ * The CMSIS functions have been implemented as intrinsics in the compiler.
+ * Please use "carm -?i" to get an up to date list of all intrinsics,
+ * Including the CMSIS ones.
+ */
+
+
+#elif defined ( __CSMC__ ) /*------------------ COSMIC Compiler -------------------*/
+/* Cosmic specific functions */
+#include
+
+#endif
+
+/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
+
+#endif /* __CORE_CMINSTR_H */
diff --git a/bsp/nrf51822/Libraries/SConscript b/bsp/nrf51822/Libraries/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..688d7e4ddcaa94e6db182d1a23165846a92bed47
--- /dev/null
+++ b/bsp/nrf51822/Libraries/SConscript
@@ -0,0 +1,27 @@
+import rtconfig
+Import('RTT_ROOT')
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+
+# The set of source files associated with this SConscript file.
+src = Split("""
+nrf51822/Source/templates/system_nrf51.c
+""")
+
+#add for Startup script
+if rtconfig.CROSS_TOOL == 'gcc':
+ src = src + ['nrf51822/Source/templates/arm/arm_startup_nrf51.s']
+elif rtconfig.CROSS_TOOL == 'keil':
+ src = src + ['nrf51822/Source/templates/arm/arm_startup_nrf51.s']
+elif rtconfig.CROSS_TOOL == 'iar':
+ src = src + ['nrf51822/Source/templates/arm/arm_startup_nrf51.s']
+
+path = [cwd + '/CMSIS/Include',
+ cwd + '/nrf51822/Include']
+
+CPPDEFINES = ['USE_STDPERIPH_DRIVER', 'NRF51']
+group = DefineGroup('Startup Code', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)
+
+Return('group')
diff --git a/bsp/nrf51822/Libraries/nrf51822/Include/nrf51.h b/bsp/nrf51822/Libraries/nrf51822/Include/nrf51.h
new file mode 100644
index 0000000000000000000000000000000000000000..3080812878c4983eab59017a25f2a6df8a6c25cd
--- /dev/null
+++ b/bsp/nrf51822/Libraries/nrf51822/Include/nrf51.h
@@ -0,0 +1,1230 @@
+
+/****************************************************************************************************//**
+ * @file nRF51.h
+ *
+ * @brief CMSIS Cortex-M0 Peripheral Access Layer Header File for
+ * nRF51 from Nordic Semiconductor.
+ *
+ * @version V522
+ * @date 26. August 2014
+ *
+ * @note Generated with SVDConv V2.81d
+ * from CMSIS SVD File 'nRF51.xml' Version 522,
+ *
+ * @par Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *
+ *******************************************************************************************************/
+
+
+
+/** @addtogroup Nordic Semiconductor
+ * @{
+ */
+
+/** @addtogroup nRF51
+ * @{
+ */
+
+#ifndef NRF51_H
+#define NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/* ------------------------- Interrupt Number Definition ------------------------ */
+
+typedef enum {
+/* ------------------- Cortex-M0 Processor Exceptions Numbers ------------------- */
+ Reset_IRQn = -15, /*!< 1 Reset Vector, invoked on Power up and warm reset */
+ NonMaskableInt_IRQn = -14, /*!< 2 Non maskable Interrupt, cannot be stopped or preempted */
+ HardFault_IRQn = -13, /*!< 3 Hard Fault, all classes of Fault */
+ SVCall_IRQn = -5, /*!< 11 System Service Call via SVC instruction */
+ DebugMonitor_IRQn = -4, /*!< 12 Debug Monitor */
+ PendSV_IRQn = -2, /*!< 14 Pendable request for system service */
+ SysTick_IRQn = -1, /*!< 15 System Tick Timer */
+/* ---------------------- nRF51 Specific Interrupt Numbers ---------------------- */
+ POWER_CLOCK_IRQn = 0, /*!< 0 POWER_CLOCK */
+ RADIO_IRQn = 1, /*!< 1 RADIO */
+ UART0_IRQn = 2, /*!< 2 UART0 */
+ SPI0_TWI0_IRQn = 3, /*!< 3 SPI0_TWI0 */
+ SPI1_TWI1_IRQn = 4, /*!< 4 SPI1_TWI1 */
+ GPIOTE_IRQn = 6, /*!< 6 GPIOTE */
+ ADC_IRQn = 7, /*!< 7 ADC */
+ TIMER0_IRQn = 8, /*!< 8 TIMER0 */
+ TIMER1_IRQn = 9, /*!< 9 TIMER1 */
+ TIMER2_IRQn = 10, /*!< 10 TIMER2 */
+ RTC0_IRQn = 11, /*!< 11 RTC0 */
+ TEMP_IRQn = 12, /*!< 12 TEMP */
+ RNG_IRQn = 13, /*!< 13 RNG */
+ ECB_IRQn = 14, /*!< 14 ECB */
+ CCM_AAR_IRQn = 15, /*!< 15 CCM_AAR */
+ WDT_IRQn = 16, /*!< 16 WDT */
+ RTC1_IRQn = 17, /*!< 17 RTC1 */
+ QDEC_IRQn = 18, /*!< 18 QDEC */
+ LPCOMP_IRQn = 19, /*!< 19 LPCOMP */
+ SWI0_IRQn = 20, /*!< 20 SWI0 */
+ SWI1_IRQn = 21, /*!< 21 SWI1 */
+ SWI2_IRQn = 22, /*!< 22 SWI2 */
+ SWI3_IRQn = 23, /*!< 23 SWI3 */
+ SWI4_IRQn = 24, /*!< 24 SWI4 */
+ SWI5_IRQn = 25 /*!< 25 SWI5 */
+} IRQn_Type;
+
+
+/** @addtogroup Configuration_of_CMSIS
+ * @{
+ */
+
+
+/* ================================================================================ */
+/* ================ Processor and Core Peripheral Section ================ */
+/* ================================================================================ */
+
+/* ----------------Configuration of the Cortex-M0 Processor and Core Peripherals---------------- */
+#define __CM0_REV 0x0301 /*!< Cortex-M0 Core Revision */
+#define __MPU_PRESENT 0 /*!< MPU present or not */
+#define __NVIC_PRIO_BITS 2 /*!< Number of Bits used for Priority Levels */
+#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
+/** @} */ /* End of group Configuration_of_CMSIS */
+
+#include "core_cm0.h" /*!< Cortex-M0 processor and core peripherals */
+#include "system_nrf51.h" /*!< nRF51 System */
+
+
+/* ================================================================================ */
+/* ================ Device Specific Peripheral Section ================ */
+/* ================================================================================ */
+
+
+/** @addtogroup Device_Peripheral_Registers
+ * @{
+ */
+
+
+/* ------------------- Start of section using anonymous unions ------------------ */
+#if defined(__CC_ARM)
+ #pragma push
+ #pragma anon_unions
+#elif defined(__ICCARM__)
+ #pragma language=extended
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+/* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning 586
+#else
+ #warning Not supported compiler type
+#endif
+
+
+typedef struct {
+ __IO uint32_t CPU0; /*!< Configurable priority configuration register for CPU0. */
+ __IO uint32_t SPIS1; /*!< Configurable priority configuration register for SPIS1. */
+ __IO uint32_t RADIO; /*!< Configurable priority configuration register for RADIO. */
+ __IO uint32_t ECB; /*!< Configurable priority configuration register for ECB. */
+ __IO uint32_t CCM; /*!< Configurable priority configuration register for CCM. */
+ __IO uint32_t AAR; /*!< Configurable priority configuration register for AAR. */
+} AMLI_RAMPRI_Type;
+
+typedef struct {
+ __O uint32_t EN; /*!< Enable channel group. */
+ __O uint32_t DIS; /*!< Disable channel group. */
+} PPI_TASKS_CHG_Type;
+
+typedef struct {
+ __IO uint32_t EEP; /*!< Channel event end-point. */
+ __IO uint32_t TEP; /*!< Channel task end-point. */
+} PPI_CH_Type;
+
+
+/* ================================================================================ */
+/* ================ POWER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Power Control. (POWER)
+ */
+
+typedef struct { /*!< POWER Structure */
+ __I uint32_t RESERVED0[30];
+ __O uint32_t TASKS_CONSTLAT; /*!< Enable constant latency mode. */
+ __O uint32_t TASKS_LOWPWR; /*!< Enable low power mode (variable latency). */
+ __I uint32_t RESERVED1[34];
+ __IO uint32_t EVENTS_POFWARN; /*!< Power failure warning. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __IO uint32_t RESETREAS; /*!< Reset reason. */
+ __I uint32_t RESERVED4[9];
+ __I uint32_t RAMSTATUS; /*!< Ram status register. */
+ __I uint32_t RESERVED5[53];
+ __O uint32_t SYSTEMOFF; /*!< System off register. */
+ __I uint32_t RESERVED6[3];
+ __IO uint32_t POFCON; /*!< Power failure configuration. */
+ __I uint32_t RESERVED7[2];
+ __IO uint32_t GPREGRET; /*!< General purpose retention register. This register is a retained
+ register. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t RAMON; /*!< Ram on/off. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RESET; /*!< Pin reset functionality configuration register. This register
+ is a retained register. */
+ __I uint32_t RESERVED10[3];
+ __IO uint32_t RAMONB; /*!< Ram on/off. */
+ __I uint32_t RESERVED11[8];
+ __IO uint32_t DCDCEN; /*!< DCDC converter enable configuration register. */
+ __I uint32_t RESERVED12[291];
+ __IO uint32_t DCDCFORCE; /*!< DCDC power-up force register. */
+} NRF_POWER_Type;
+
+
+/* ================================================================================ */
+/* ================ CLOCK ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Clock control. (CLOCK)
+ */
+
+typedef struct { /*!< CLOCK Structure */
+ __O uint32_t TASKS_HFCLKSTART; /*!< Start HFCLK clock source. */
+ __O uint32_t TASKS_HFCLKSTOP; /*!< Stop HFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTART; /*!< Start LFCLK clock source. */
+ __O uint32_t TASKS_LFCLKSTOP; /*!< Stop LFCLK clock source. */
+ __O uint32_t TASKS_CAL; /*!< Start calibration of LFCLK RC oscillator. */
+ __O uint32_t TASKS_CTSTART; /*!< Start calibration timer. */
+ __O uint32_t TASKS_CTSTOP; /*!< Stop calibration timer. */
+ __I uint32_t RESERVED0[57];
+ __IO uint32_t EVENTS_HFCLKSTARTED; /*!< HFCLK oscillator started. */
+ __IO uint32_t EVENTS_LFCLKSTARTED; /*!< LFCLK oscillator started. */
+ __I uint32_t RESERVED1;
+ __IO uint32_t EVENTS_DONE; /*!< Calibration of LFCLK RC oscillator completed. */
+ __IO uint32_t EVENTS_CTTO; /*!< Calibration timer timeout. */
+ __I uint32_t RESERVED2[124];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[63];
+ __I uint32_t HFCLKRUN; /*!< Task HFCLKSTART trigger status. */
+ __I uint32_t HFCLKSTAT; /*!< High frequency clock status. */
+ __I uint32_t RESERVED4;
+ __I uint32_t LFCLKRUN; /*!< Task LFCLKSTART triggered status. */
+ __I uint32_t LFCLKSTAT; /*!< Low frequency clock status. */
+ __I uint32_t LFCLKSRCCOPY; /*!< Clock source for the LFCLK clock, set when task LKCLKSTART is
+ triggered. */
+ __I uint32_t RESERVED5[62];
+ __IO uint32_t LFCLKSRC; /*!< Clock source for the LFCLK clock. */
+ __I uint32_t RESERVED6[7];
+ __IO uint32_t CTIV; /*!< Calibration timer interval. */
+ __I uint32_t RESERVED7[5];
+ __IO uint32_t XTALFREQ; /*!< Crystal frequency. */
+} NRF_CLOCK_Type;
+
+
+/* ================================================================================ */
+/* ================ MPU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Memory Protection Unit. (MPU)
+ */
+
+typedef struct { /*!< MPU Structure */
+ __I uint32_t RESERVED0[330];
+ __IO uint32_t PERR0; /*!< Configuration of peripherals in mpu regions. */
+ __IO uint32_t RLENR0; /*!< Length of RAM region 0. */
+ __I uint32_t RESERVED1[52];
+ __IO uint32_t PROTENSET0; /*!< Erase and write protection bit enable set register. */
+ __IO uint32_t PROTENSET1; /*!< Erase and write protection bit enable set register. */
+ __IO uint32_t DISABLEINDEBUG; /*!< Disable erase and write protection mechanism in debug mode. */
+ __IO uint32_t PROTBLOCKSIZE; /*!< Erase and write protection block size. */
+} NRF_MPU_Type;
+
+
+/* ================================================================================ */
+/* ================ PU ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Patch unit. (PU)
+ */
+
+typedef struct { /*!< PU Structure */
+ __I uint32_t RESERVED0[448];
+ __IO uint32_t REPLACEADDR[8]; /*!< Address of first instruction to replace. */
+ __I uint32_t RESERVED1[24];
+ __IO uint32_t PATCHADDR[8]; /*!< Relative address of patch instructions. */
+ __I uint32_t RESERVED2[24];
+ __IO uint32_t PATCHEN; /*!< Patch enable register. */
+ __IO uint32_t PATCHENSET; /*!< Patch enable register. */
+ __IO uint32_t PATCHENCLR; /*!< Patch disable register. */
+} NRF_PU_Type;
+
+
+/* ================================================================================ */
+/* ================ AMLI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AHB Multi-Layer Interface. (AMLI)
+ */
+
+typedef struct { /*!< AMLI Structure */
+ __I uint32_t RESERVED0[896];
+ AMLI_RAMPRI_Type RAMPRI; /*!< RAM configurable priority configuration structure. */
+} NRF_AMLI_Type;
+
+
+/* ================================================================================ */
+/* ================ RADIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief The radio. (RADIO)
+ */
+
+typedef struct { /*!< RADIO Structure */
+ __O uint32_t TASKS_TXEN; /*!< Enable radio in TX mode. */
+ __O uint32_t TASKS_RXEN; /*!< Enable radio in RX mode. */
+ __O uint32_t TASKS_START; /*!< Start radio. */
+ __O uint32_t TASKS_STOP; /*!< Stop radio. */
+ __O uint32_t TASKS_DISABLE; /*!< Disable radio. */
+ __O uint32_t TASKS_RSSISTART; /*!< Start the RSSI and take one sample of the receive signal strength. */
+ __O uint32_t TASKS_RSSISTOP; /*!< Stop the RSSI measurement. */
+ __O uint32_t TASKS_BCSTART; /*!< Start the bit counter. */
+ __O uint32_t TASKS_BCSTOP; /*!< Stop the bit counter. */
+ __I uint32_t RESERVED0[55];
+ __IO uint32_t EVENTS_READY; /*!< Ready event. */
+ __IO uint32_t EVENTS_ADDRESS; /*!< Address event. */
+ __IO uint32_t EVENTS_PAYLOAD; /*!< Payload event. */
+ __IO uint32_t EVENTS_END; /*!< End event. */
+ __IO uint32_t EVENTS_DISABLED; /*!< Disable event. */
+ __IO uint32_t EVENTS_DEVMATCH; /*!< A device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_DEVMISS; /*!< No device address match occurred on the last received packet. */
+ __IO uint32_t EVENTS_RSSIEND; /*!< Sampling of the receive signal strength complete. A new RSSI
+ sample is ready for readout at the RSSISAMPLE register. */
+ __I uint32_t RESERVED1[2];
+ __IO uint32_t EVENTS_BCMATCH; /*!< Bit counter reached bit count value specified in BC register. */
+ __I uint32_t RESERVED2[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the radio. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[61];
+ __I uint32_t CRCSTATUS; /*!< CRC status of received packet. */
+ __I uint32_t CD; /*!< Carrier detect. */
+ __I uint32_t RXMATCH; /*!< Received address. */
+ __I uint32_t RXCRC; /*!< Received CRC. */
+ __I uint32_t DAI; /*!< Device address match index. */
+ __I uint32_t RESERVED5[60];
+ __IO uint32_t PACKETPTR; /*!< Packet pointer. Decision point: START task. */
+ __IO uint32_t FREQUENCY; /*!< Frequency. */
+ __IO uint32_t TXPOWER; /*!< Output power. */
+ __IO uint32_t MODE; /*!< Data rate and modulation. */
+ __IO uint32_t PCNF0; /*!< Packet configuration 0. */
+ __IO uint32_t PCNF1; /*!< Packet configuration 1. */
+ __IO uint32_t BASE0; /*!< Radio base address 0. Decision point: START task. */
+ __IO uint32_t BASE1; /*!< Radio base address 1. Decision point: START task. */
+ __IO uint32_t PREFIX0; /*!< Prefixes bytes for logical addresses 0 to 3. */
+ __IO uint32_t PREFIX1; /*!< Prefixes bytes for logical addresses 4 to 7. */
+ __IO uint32_t TXADDRESS; /*!< Transmit address select. */
+ __IO uint32_t RXADDRESSES; /*!< Receive address select. */
+ __IO uint32_t CRCCNF; /*!< CRC configuration. */
+ __IO uint32_t CRCPOLY; /*!< CRC polynomial. */
+ __IO uint32_t CRCINIT; /*!< CRC initial value. */
+ __IO uint32_t TEST; /*!< Test features enable register. */
+ __IO uint32_t TIFS; /*!< Inter Frame Spacing in microseconds. */
+ __I uint32_t RSSISAMPLE; /*!< RSSI sample. */
+ __I uint32_t RESERVED6;
+ __I uint32_t STATE; /*!< Current radio state. */
+ __IO uint32_t DATAWHITEIV; /*!< Data whitening initial value. */
+ __I uint32_t RESERVED7[2];
+ __IO uint32_t BCC; /*!< Bit counter compare. */
+ __I uint32_t RESERVED8[39];
+ __IO uint32_t DAB[8]; /*!< Device address base segment. */
+ __IO uint32_t DAP[8]; /*!< Device address prefix. */
+ __IO uint32_t DACNF; /*!< Device address match configuration. */
+ __I uint32_t RESERVED9[56];
+ __IO uint32_t OVERRIDE0; /*!< Trim value override register 0. */
+ __IO uint32_t OVERRIDE1; /*!< Trim value override register 1. */
+ __IO uint32_t OVERRIDE2; /*!< Trim value override register 2. */
+ __IO uint32_t OVERRIDE3; /*!< Trim value override register 3. */
+ __IO uint32_t OVERRIDE4; /*!< Trim value override register 4. */
+ __I uint32_t RESERVED10[561];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RADIO_Type;
+
+
+/* ================================================================================ */
+/* ================ UART ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Universal Asynchronous Receiver/Transmitter. (UART)
+ */
+
+typedef struct { /*!< UART Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start UART receiver. */
+ __O uint32_t TASKS_STOPRX; /*!< Stop UART receiver. */
+ __O uint32_t TASKS_STARTTX; /*!< Start UART transmitter. */
+ __O uint32_t TASKS_STOPTX; /*!< Stop UART transmitter. */
+ __I uint32_t RESERVED0[3];
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend UART. */
+ __I uint32_t RESERVED1[56];
+ __IO uint32_t EVENTS_CTS; /*!< CTS activated. */
+ __IO uint32_t EVENTS_NCTS; /*!< CTS deactivated. */
+ __IO uint32_t EVENTS_RXDRDY; /*!< Data received in RXD. */
+ __I uint32_t RESERVED2[4];
+ __IO uint32_t EVENTS_TXDRDY; /*!< Data sent from TXD. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t EVENTS_ERROR; /*!< Error detected. */
+ __I uint32_t RESERVED4[7];
+ __IO uint32_t EVENTS_RXTO; /*!< Receiver timeout. */
+ __I uint32_t RESERVED5[46];
+ __IO uint32_t SHORTS; /*!< Shortcuts for UART. */
+ __I uint32_t RESERVED6[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED7[93];
+ __IO uint32_t ERRORSRC; /*!< Error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED8[31];
+ __IO uint32_t ENABLE; /*!< Enable UART and acquire IOs. */
+ __I uint32_t RESERVED9;
+ __IO uint32_t PSELRTS; /*!< Pin select for RTS. */
+ __IO uint32_t PSELTXD; /*!< Pin select for TXD. */
+ __IO uint32_t PSELCTS; /*!< Pin select for CTS. */
+ __IO uint32_t PSELRXD; /*!< Pin select for RXD. */
+ __I uint32_t RXD; /*!< RXD register. On read action the buffer pointer is displaced.
+ Once read the character is consumed. If read when no character
+ available, the UART will stop working. */
+ __O uint32_t TXD; /*!< TXD register. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t BAUDRATE; /*!< UART Baudrate. */
+ __I uint32_t RESERVED11[17];
+ __IO uint32_t CONFIG; /*!< Configuration of parity and hardware flow control register. */
+ __I uint32_t RESERVED12[675];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_UART_Type;
+
+
+/* ================================================================================ */
+/* ================ SPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI master 0. (SPI)
+ */
+
+typedef struct { /*!< SPI Structure */
+ __I uint32_t RESERVED0[66];
+ __IO uint32_t EVENTS_READY; /*!< TXD byte sent and RXD byte received. */
+ __I uint32_t RESERVED1[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[125];
+ __IO uint32_t ENABLE; /*!< Enable SPI. */
+ __I uint32_t RESERVED3;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __I uint32_t RESERVED4;
+ __I uint32_t RXD; /*!< RX data. */
+ __IO uint32_t TXD; /*!< TX data. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t FREQUENCY; /*!< SPI frequency */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED7[681];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPI_Type;
+
+
+/* ================================================================================ */
+/* ================ TWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Two-wire interface master 0. (TWI)
+ */
+
+typedef struct { /*!< TWI Structure */
+ __O uint32_t TASKS_STARTRX; /*!< Start 2-Wire master receive sequence. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STARTTX; /*!< Start 2-Wire master transmit sequence. */
+ __I uint32_t RESERVED1[2];
+ __O uint32_t TASKS_STOP; /*!< Stop 2-Wire transaction. */
+ __I uint32_t RESERVED2;
+ __O uint32_t TASKS_SUSPEND; /*!< Suspend 2-Wire transaction. */
+ __O uint32_t TASKS_RESUME; /*!< Resume 2-Wire transaction. */
+ __I uint32_t RESERVED3[56];
+ __IO uint32_t EVENTS_STOPPED; /*!< Two-wire stopped. */
+ __IO uint32_t EVENTS_RXDREADY; /*!< Two-wire ready to deliver new RXD byte received. */
+ __I uint32_t RESERVED4[4];
+ __IO uint32_t EVENTS_TXDSENT; /*!< Two-wire finished sending last TXD byte. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t EVENTS_ERROR; /*!< Two-wire error detected. */
+ __I uint32_t RESERVED6[4];
+ __IO uint32_t EVENTS_BB; /*!< Two-wire byte boundary. */
+ __I uint32_t RESERVED7[3];
+ __IO uint32_t EVENTS_SUSPENDED; /*!< Two-wire suspended. */
+ __I uint32_t RESERVED8[45];
+ __IO uint32_t SHORTS; /*!< Shortcuts for TWI. */
+ __I uint32_t RESERVED9[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED10[110];
+ __IO uint32_t ERRORSRC; /*!< Two-wire error source. Write error field to 1 to clear error. */
+ __I uint32_t RESERVED11[14];
+ __IO uint32_t ENABLE; /*!< Enable two-wire master. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t PSELSCL; /*!< Pin select for SCL. */
+ __IO uint32_t PSELSDA; /*!< Pin select for SDA. */
+ __I uint32_t RESERVED13[2];
+ __I uint32_t RXD; /*!< RX data register. */
+ __IO uint32_t TXD; /*!< TX data register. */
+ __I uint32_t RESERVED14;
+ __IO uint32_t FREQUENCY; /*!< Two-wire frequency. */
+ __I uint32_t RESERVED15[24];
+ __IO uint32_t ADDRESS; /*!< Address used in the two-wire transfer. */
+ __I uint32_t RESERVED16[668];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TWI_Type;
+
+
+/* ================================================================================ */
+/* ================ SPIS ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SPI slave 1. (SPIS)
+ */
+
+typedef struct { /*!< SPIS Structure */
+ __I uint32_t RESERVED0[9];
+ __O uint32_t TASKS_ACQUIRE; /*!< Acquire SPI semaphore. */
+ __O uint32_t TASKS_RELEASE; /*!< Release SPI semaphore. */
+ __I uint32_t RESERVED1[54];
+ __IO uint32_t EVENTS_END; /*!< Granted transaction completed. */
+ __I uint32_t RESERVED2[8];
+ __IO uint32_t EVENTS_ACQUIRED; /*!< Semaphore acquired. */
+ __I uint32_t RESERVED3[53];
+ __IO uint32_t SHORTS; /*!< Shortcuts for SPIS. */
+ __I uint32_t RESERVED4[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED5[61];
+ __I uint32_t SEMSTAT; /*!< Semaphore status. */
+ __I uint32_t RESERVED6[15];
+ __IO uint32_t STATUS; /*!< Status from last transaction. */
+ __I uint32_t RESERVED7[47];
+ __IO uint32_t ENABLE; /*!< Enable SPIS. */
+ __I uint32_t RESERVED8;
+ __IO uint32_t PSELSCK; /*!< Pin select for SCK. */
+ __IO uint32_t PSELMISO; /*!< Pin select for MISO. */
+ __IO uint32_t PSELMOSI; /*!< Pin select for MOSI. */
+ __IO uint32_t PSELCSN; /*!< Pin select for CSN. */
+ __I uint32_t RESERVED9[7];
+ __IO uint32_t RXDPTR; /*!< RX data pointer. */
+ __IO uint32_t MAXRX; /*!< Maximum number of bytes in the receive buffer. */
+ __I uint32_t AMOUNTRX; /*!< Number of bytes received in last granted transaction. */
+ __I uint32_t RESERVED10;
+ __IO uint32_t TXDPTR; /*!< TX data pointer. */
+ __IO uint32_t MAXTX; /*!< Maximum number of bytes in the transmit buffer. */
+ __I uint32_t AMOUNTTX; /*!< Number of bytes transmitted in last granted transaction. */
+ __I uint32_t RESERVED11;
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED12;
+ __IO uint32_t DEF; /*!< Default character. */
+ __I uint32_t RESERVED13[24];
+ __IO uint32_t ORC; /*!< Over-read character. */
+ __I uint32_t RESERVED14[654];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_SPIS_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIOTE ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief GPIO tasks and events. (GPIOTE)
+ */
+
+typedef struct { /*!< GPIOTE Structure */
+ __O uint32_t TASKS_OUT[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_IN[4]; /*!< Tasks asssociated with GPIOTE channels. */
+ __I uint32_t RESERVED1[27];
+ __IO uint32_t EVENTS_PORT; /*!< Event generated from multiple pins. */
+ __I uint32_t RESERVED2[97];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[129];
+ __IO uint32_t CONFIG[4]; /*!< Channel configuration registers. */
+ __I uint32_t RESERVED4[695];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_GPIOTE_Type;
+
+
+/* ================================================================================ */
+/* ================ ADC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Analog to digital converter. (ADC)
+ */
+
+typedef struct { /*!< ADC Structure */
+ __O uint32_t TASKS_START; /*!< Start an ADC conversion. */
+ __O uint32_t TASKS_STOP; /*!< Stop ADC. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_END; /*!< ADC conversion complete. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t BUSY; /*!< ADC busy register. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t ENABLE; /*!< ADC enable. */
+ __IO uint32_t CONFIG; /*!< ADC configuration register. */
+ __I uint32_t RESULT; /*!< Result of ADC conversion. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ADC_Type;
+
+
+/* ================================================================================ */
+/* ================ TIMER ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Timer 0. (TIMER)
+ */
+
+typedef struct { /*!< TIMER Structure */
+ __O uint32_t TASKS_START; /*!< Start Timer. */
+ __O uint32_t TASKS_STOP; /*!< Stop Timer. */
+ __O uint32_t TASKS_COUNT; /*!< Increment Timer (In counter mode). */
+ __O uint32_t TASKS_CLEAR; /*!< Clear timer. */
+ __O uint32_t TASKS_SHUTDOWN; /*!< Shutdown timer. */
+ __I uint32_t RESERVED0[11];
+ __O uint32_t TASKS_CAPTURE[4]; /*!< Capture Timer value to CC[n] registers. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[44];
+ __IO uint32_t SHORTS; /*!< Shortcuts for Timer. */
+ __I uint32_t RESERVED3[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED4[126];
+ __IO uint32_t MODE; /*!< Timer Mode selection. */
+ __IO uint32_t BITMODE; /*!< Sets timer behaviour. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t PRESCALER; /*!< 4-bit prescaler to source clock frequency (max value 9). Source
+ clock frequency is divided by 2^SCALE. */
+ __I uint32_t RESERVED6[11];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED7[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TIMER_Type;
+
+
+/* ================================================================================ */
+/* ================ RTC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Real time counter 0. (RTC)
+ */
+
+typedef struct { /*!< RTC Structure */
+ __O uint32_t TASKS_START; /*!< Start RTC Counter. */
+ __O uint32_t TASKS_STOP; /*!< Stop RTC Counter. */
+ __O uint32_t TASKS_CLEAR; /*!< Clear RTC Counter. */
+ __O uint32_t TASKS_TRIGOVRFLW; /*!< Set COUNTER to 0xFFFFFFF0. */
+ __I uint32_t RESERVED0[60];
+ __IO uint32_t EVENTS_TICK; /*!< Event on COUNTER increment. */
+ __IO uint32_t EVENTS_OVRFLW; /*!< Event on COUNTER overflow. */
+ __I uint32_t RESERVED1[14];
+ __IO uint32_t EVENTS_COMPARE[4]; /*!< Compare event on CC[n] match. */
+ __I uint32_t RESERVED2[109];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[13];
+ __IO uint32_t EVTEN; /*!< Configures event enable routing to PPI for each RTC event. */
+ __IO uint32_t EVTENSET; /*!< Enable events routing to PPI. The reading of this register gives
+ the value of EVTEN. */
+ __IO uint32_t EVTENCLR; /*!< Disable events routing to PPI. The reading of this register
+ gives the value of EVTEN. */
+ __I uint32_t RESERVED4[110];
+ __I uint32_t COUNTER; /*!< Current COUNTER value. */
+ __IO uint32_t PRESCALER; /*!< 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)).
+ Must be written when RTC is STOPed. */
+ __I uint32_t RESERVED5[13];
+ __IO uint32_t CC[4]; /*!< Capture/compare registers. */
+ __I uint32_t RESERVED6[683];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RTC_Type;
+
+
+/* ================================================================================ */
+/* ================ TEMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Temperature Sensor. (TEMP)
+ */
+
+typedef struct { /*!< TEMP Structure */
+ __O uint32_t TASKS_START; /*!< Start temperature measurement. */
+ __O uint32_t TASKS_STOP; /*!< Stop temperature measurement. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_DATARDY; /*!< Temperature measurement complete, data ready event. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[127];
+ __I int32_t TEMP; /*!< Die temperature in degC, 2's complement format, 0.25 degC pecision. */
+ __I uint32_t RESERVED3[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_TEMP_Type;
+
+
+/* ================================================================================ */
+/* ================ RNG ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Random Number Generator. (RNG)
+ */
+
+typedef struct { /*!< RNG Structure */
+ __O uint32_t TASKS_START; /*!< Start the random number generator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the random number generator. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_VALRDY; /*!< New random number generated and written to VALUE register. */
+ __I uint32_t RESERVED1[63];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the RNG. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register */
+ __I uint32_t RESERVED3[126];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t VALUE; /*!< RNG random number. */
+ __I uint32_t RESERVED4[700];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_RNG_Type;
+
+
+/* ================================================================================ */
+/* ================ ECB ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES ECB Mode Encryption. (ECB)
+ */
+
+typedef struct { /*!< ECB Structure */
+ __O uint32_t TASKS_STARTECB; /*!< Start ECB block encrypt. If a crypto operation is running, this
+ will not initiate a new encryption and the ERRORECB event will
+ be triggered. */
+ __O uint32_t TASKS_STOPECB; /*!< Stop current ECB encryption. If a crypto operation is running,
+ this will will trigger the ERRORECB event. */
+ __I uint32_t RESERVED0[62];
+ __IO uint32_t EVENTS_ENDECB; /*!< ECB block encrypt complete. */
+ __IO uint32_t EVENTS_ERRORECB; /*!< ECB block encrypt aborted due to a STOPECB task or due to an
+ error. */
+ __I uint32_t RESERVED1[127];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t ECBDATAPTR; /*!< ECB block encrypt memory pointer. */
+ __I uint32_t RESERVED3[701];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_ECB_Type;
+
+
+/* ================================================================================ */
+/* ================ AAR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Accelerated Address Resolver. (AAR)
+ */
+
+typedef struct { /*!< AAR Structure */
+ __O uint32_t TASKS_START; /*!< Start resolving addresses based on IRKs specified in the IRK
+ data structure. */
+ __I uint32_t RESERVED0;
+ __O uint32_t TASKS_STOP; /*!< Stop resolving addresses. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t EVENTS_END; /*!< Address resolution procedure completed. */
+ __IO uint32_t EVENTS_RESOLVED; /*!< Address resolved. */
+ __IO uint32_t EVENTS_NOTRESOLVED; /*!< Address not resolved. */
+ __I uint32_t RESERVED2[126];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t STATUS; /*!< Resolution status. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable AAR. */
+ __IO uint32_t NIRK; /*!< Number of Identity root Keys in the IRK data structure. */
+ __IO uint32_t IRKPTR; /*!< Pointer to the IRK data structure. */
+ __I uint32_t RESERVED5;
+ __IO uint32_t ADDRPTR; /*!< Pointer to the resolvable address (6 bytes). */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
+ during resolution. A minimum of 3 bytes must be reserved. */
+ __I uint32_t RESERVED6[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_AAR_Type;
+
+
+/* ================================================================================ */
+/* ================ CCM ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief AES CCM Mode Encryption. (CCM)
+ */
+
+typedef struct { /*!< CCM Structure */
+ __O uint32_t TASKS_KSGEN; /*!< Start generation of key-stream. This operation will stop by
+ itself when completed. */
+ __O uint32_t TASKS_CRYPT; /*!< Start encrypt/decrypt. This operation will stop by itself when
+ completed. */
+ __O uint32_t TASKS_STOP; /*!< Stop encrypt/decrypt. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_ENDKSGEN; /*!< Keystream generation completed. */
+ __IO uint32_t EVENTS_ENDCRYPT; /*!< Encrypt/decrypt completed. */
+ __IO uint32_t EVENTS_ERROR; /*!< Error happened. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the CCM. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t MICSTATUS; /*!< CCM RX MIC check result. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< CCM enable. */
+ __IO uint32_t MODE; /*!< Operation mode. */
+ __IO uint32_t CNFPTR; /*!< Pointer to a data structure holding AES key and NONCE vector. */
+ __IO uint32_t INPTR; /*!< Pointer to the input packet. */
+ __IO uint32_t OUTPTR; /*!< Pointer to the output packet. */
+ __IO uint32_t SCRATCHPTR; /*!< Pointer to a "scratch" data area used for temporary storage
+ during resolution. A minimum of 43 bytes must be reserved. */
+ __I uint32_t RESERVED5[697];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_CCM_Type;
+
+
+/* ================================================================================ */
+/* ================ WDT ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Watchdog Timer. (WDT)
+ */
+
+typedef struct { /*!< WDT Structure */
+ __O uint32_t TASKS_START; /*!< Start the watchdog. */
+ __I uint32_t RESERVED0[63];
+ __IO uint32_t EVENTS_TIMEOUT; /*!< Watchdog timeout. */
+ __I uint32_t RESERVED1[128];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED2[61];
+ __I uint32_t RUNSTATUS; /*!< Watchdog running status. */
+ __I uint32_t REQSTATUS; /*!< Request status. */
+ __I uint32_t RESERVED3[63];
+ __IO uint32_t CRV; /*!< Counter reload value in number of 32kiHz clock cycles. */
+ __IO uint32_t RREN; /*!< Reload request enable. */
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __I uint32_t RESERVED4[60];
+ __O uint32_t RR[8]; /*!< Reload requests registers. */
+ __I uint32_t RESERVED5[631];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_WDT_Type;
+
+
+/* ================================================================================ */
+/* ================ QDEC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Rotary decoder. (QDEC)
+ */
+
+typedef struct { /*!< QDEC Structure */
+ __O uint32_t TASKS_START; /*!< Start the quadrature decoder. */
+ __O uint32_t TASKS_STOP; /*!< Stop the quadrature decoder. */
+ __O uint32_t TASKS_READCLRACC; /*!< Transfers the content from ACC registers to ACCREAD registers,
+ and clears the ACC registers. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_SAMPLERDY; /*!< A new sample is written to the sample register. */
+ __IO uint32_t EVENTS_REPORTRDY; /*!< REPORTPER number of samples accumulated in ACC register, and
+ ACC register different than zero. */
+ __IO uint32_t EVENTS_ACCOF; /*!< ACC or ACCDBL register overflow. */
+ __I uint32_t RESERVED1[61];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the QDEC. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[125];
+ __IO uint32_t ENABLE; /*!< Enable the QDEC. */
+ __IO uint32_t LEDPOL; /*!< LED output pin polarity. */
+ __IO uint32_t SAMPLEPER; /*!< Sample period. */
+ __I int32_t SAMPLE; /*!< Motion sample value. */
+ __IO uint32_t REPORTPER; /*!< Number of samples to generate an EVENT_REPORTRDY. */
+ __I int32_t ACC; /*!< Accumulated valid transitions register. */
+ __I int32_t ACCREAD; /*!< Snapshot of ACC register. Value generated by the TASKS_READCLEACC
+ task. */
+ __IO uint32_t PSELLED; /*!< Pin select for LED output. */
+ __IO uint32_t PSELA; /*!< Pin select for phase A input. */
+ __IO uint32_t PSELB; /*!< Pin select for phase B input. */
+ __IO uint32_t DBFEN; /*!< Enable debouncer input filters. */
+ __I uint32_t RESERVED4[5];
+ __IO uint32_t LEDPRE; /*!< Time LED is switched ON before the sample. */
+ __I uint32_t ACCDBL; /*!< Accumulated double (error) transitions register. */
+ __I uint32_t ACCDBLREAD; /*!< Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC
+ task. */
+ __I uint32_t RESERVED5[684];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_QDEC_Type;
+
+
+/* ================================================================================ */
+/* ================ LPCOMP ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Low power comparator. (LPCOMP)
+ */
+
+typedef struct { /*!< LPCOMP Structure */
+ __O uint32_t TASKS_START; /*!< Start the comparator. */
+ __O uint32_t TASKS_STOP; /*!< Stop the comparator. */
+ __O uint32_t TASKS_SAMPLE; /*!< Sample comparator value. */
+ __I uint32_t RESERVED0[61];
+ __IO uint32_t EVENTS_READY; /*!< LPCOMP is ready and output is valid. */
+ __IO uint32_t EVENTS_DOWN; /*!< Input voltage crossed the threshold going down. */
+ __IO uint32_t EVENTS_UP; /*!< Input voltage crossed the threshold going up. */
+ __IO uint32_t EVENTS_CROSS; /*!< Input voltage crossed the threshold in any direction. */
+ __I uint32_t RESERVED1[60];
+ __IO uint32_t SHORTS; /*!< Shortcuts for the LPCOMP. */
+ __I uint32_t RESERVED2[64];
+ __IO uint32_t INTENSET; /*!< Interrupt enable set register. */
+ __IO uint32_t INTENCLR; /*!< Interrupt enable clear register. */
+ __I uint32_t RESERVED3[61];
+ __I uint32_t RESULT; /*!< Result of last compare. */
+ __I uint32_t RESERVED4[63];
+ __IO uint32_t ENABLE; /*!< Enable the LPCOMP. */
+ __IO uint32_t PSEL; /*!< Input pin select. */
+ __IO uint32_t REFSEL; /*!< Reference select. */
+ __IO uint32_t EXTREFSEL; /*!< External reference select. */
+ __I uint32_t RESERVED5[4];
+ __IO uint32_t ANADETECT; /*!< Analog detect configuration. */
+ __I uint32_t RESERVED6[694];
+ __IO uint32_t POWER; /*!< Peripheral power control. */
+} NRF_LPCOMP_Type;
+
+
+/* ================================================================================ */
+/* ================ SWI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief SW Interrupts. (SWI)
+ */
+
+typedef struct { /*!< SWI Structure */
+ __I uint32_t SD_UNUSED; /*!< Unused. */
+} NRF_SWI_Type;
+
+
+/* ================================================================================ */
+/* ================ NVMC ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Non Volatile Memory Controller. (NVMC)
+ */
+
+typedef struct { /*!< NVMC Structure */
+ __I uint32_t RESERVED0[256];
+ __I uint32_t READY; /*!< Ready flag. */
+ __I uint32_t RESERVED1[64];
+ __IO uint32_t CONFIG; /*!< Configuration register. */
+ __IO uint32_t ERASEPAGE; /*!< Register for erasing a non-protected non-volatile memory page. */
+ __IO uint32_t ERASEALL; /*!< Register for erasing all non-volatile user memory. */
+ __IO uint32_t ERASEPROTECTEDPAGE; /*!< Register for erasing a protected non-volatile memory page. */
+ __IO uint32_t ERASEUICR; /*!< Register for start erasing User Information Congfiguration Registers. */
+} NRF_NVMC_Type;
+
+
+/* ================================================================================ */
+/* ================ PPI ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief PPI controller. (PPI)
+ */
+
+typedef struct { /*!< PPI Structure */
+ PPI_TASKS_CHG_Type TASKS_CHG[4]; /*!< Channel group tasks. */
+ __I uint32_t RESERVED0[312];
+ __IO uint32_t CHEN; /*!< Channel enable. */
+ __IO uint32_t CHENSET; /*!< Channel enable set. */
+ __IO uint32_t CHENCLR; /*!< Channel enable clear. */
+ __I uint32_t RESERVED1;
+ PPI_CH_Type CH[16]; /*!< PPI Channel. */
+ __I uint32_t RESERVED2[156];
+ __IO uint32_t CHG[4]; /*!< Channel group configuration. */
+} NRF_PPI_Type;
+
+
+/* ================================================================================ */
+/* ================ FICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief Factory Information Configuration. (FICR)
+ */
+
+typedef struct { /*!< FICR Structure */
+ __I uint32_t RESERVED0[4];
+ __I uint32_t CODEPAGESIZE; /*!< Code memory page size in bytes. */
+ __I uint32_t CODESIZE; /*!< Code memory size in pages. */
+ __I uint32_t RESERVED1[4];
+ __I uint32_t CLENR0; /*!< Length of code region 0 in bytes. */
+ __I uint32_t PPFC; /*!< Pre-programmed factory code present. */
+ __I uint32_t RESERVED2;
+ __I uint32_t NUMRAMBLOCK; /*!< Number of individualy controllable RAM blocks. */
+
+ union {
+ __I uint32_t SIZERAMBLOCK[4]; /*!< Deprecated array of size of RAM block in bytes. This name is
+ kept for backward compatinility purposes. Use SIZERAMBLOCKS
+ instead. */
+ __I uint32_t SIZERAMBLOCKS; /*!< Size of RAM blocks in bytes. */
+ };
+ __I uint32_t RESERVED3[5];
+ __I uint32_t CONFIGID; /*!< Configuration identifier. */
+ __I uint32_t DEVICEID[2]; /*!< Device identifier. */
+ __I uint32_t RESERVED4[6];
+ __I uint32_t ER[4]; /*!< Encryption root. */
+ __I uint32_t IR[4]; /*!< Identity root. */
+ __I uint32_t DEVICEADDRTYPE; /*!< Device address type. */
+ __I uint32_t DEVICEADDR[2]; /*!< Device address. */
+ __I uint32_t OVERRIDEEN; /*!< Radio calibration override enable. */
+ __I uint32_t NRF_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for NRF_1Mbit
+ mode. */
+ __I uint32_t RESERVED5[10];
+ __I uint32_t BLE_1MBIT[5]; /*!< Override values for the OVERRIDEn registers in RADIO for BLE_1Mbit
+ mode. */
+} NRF_FICR_Type;
+
+
+/* ================================================================================ */
+/* ================ UICR ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief User Information Configuration. (UICR)
+ */
+
+typedef struct { /*!< UICR Structure */
+ __IO uint32_t CLENR0; /*!< Length of code region 0. */
+ __IO uint32_t RBPCONF; /*!< Readback protection configuration. */
+ __IO uint32_t XTALFREQ; /*!< Reset value for CLOCK XTALFREQ register. */
+ __I uint32_t RESERVED0;
+ __I uint32_t FWID; /*!< Firmware ID. */
+ __IO uint32_t BOOTLOADERADDR; /*!< Bootloader start address. */
+} NRF_UICR_Type;
+
+
+/* ================================================================================ */
+/* ================ GPIO ================ */
+/* ================================================================================ */
+
+
+/**
+ * @brief General purpose input and output. (GPIO)
+ */
+
+typedef struct { /*!< GPIO Structure */
+ __I uint32_t RESERVED0[321];
+ __IO uint32_t OUT; /*!< Write GPIO port. */
+ __IO uint32_t OUTSET; /*!< Set individual bits in GPIO port. */
+ __IO uint32_t OUTCLR; /*!< Clear individual bits in GPIO port. */
+ __I uint32_t IN; /*!< Read GPIO port. */
+ __IO uint32_t DIR; /*!< Direction of GPIO pins. */
+ __IO uint32_t DIRSET; /*!< DIR set register. */
+ __IO uint32_t DIRCLR; /*!< DIR clear register. */
+ __I uint32_t RESERVED1[120];
+ __IO uint32_t PIN_CNF[32]; /*!< Configuration of GPIO pins. */
+} NRF_GPIO_Type;
+
+
+/* -------------------- End of section using anonymous unions ------------------- */
+#if defined(__CC_ARM)
+ #pragma pop
+#elif defined(__ICCARM__)
+ /* leave anonymous unions enabled */
+#elif defined(__GNUC__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TMS470__)
+ /* anonymous unions are enabled by default */
+#elif defined(__TASKING__)
+ #pragma warning restore
+#else
+ #warning Not supported compiler type
+#endif
+
+
+
+
+/* ================================================================================ */
+/* ================ Peripheral memory map ================ */
+/* ================================================================================ */
+
+#define NRF_POWER_BASE 0x40000000UL
+#define NRF_CLOCK_BASE 0x40000000UL
+#define NRF_MPU_BASE 0x40000000UL
+#define NRF_PU_BASE 0x40000000UL
+#define NRF_AMLI_BASE 0x40000000UL
+#define NRF_RADIO_BASE 0x40001000UL
+#define NRF_UART0_BASE 0x40002000UL
+#define NRF_SPI0_BASE 0x40003000UL
+#define NRF_TWI0_BASE 0x40003000UL
+#define NRF_SPI1_BASE 0x40004000UL
+#define NRF_TWI1_BASE 0x40004000UL
+#define NRF_SPIS1_BASE 0x40004000UL
+#define NRF_GPIOTE_BASE 0x40006000UL
+#define NRF_ADC_BASE 0x40007000UL
+#define NRF_TIMER0_BASE 0x40008000UL
+#define NRF_TIMER1_BASE 0x40009000UL
+#define NRF_TIMER2_BASE 0x4000A000UL
+#define NRF_RTC0_BASE 0x4000B000UL
+#define NRF_TEMP_BASE 0x4000C000UL
+#define NRF_RNG_BASE 0x4000D000UL
+#define NRF_ECB_BASE 0x4000E000UL
+#define NRF_AAR_BASE 0x4000F000UL
+#define NRF_CCM_BASE 0x4000F000UL
+#define NRF_WDT_BASE 0x40010000UL
+#define NRF_RTC1_BASE 0x40011000UL
+#define NRF_QDEC_BASE 0x40012000UL
+#define NRF_LPCOMP_BASE 0x40013000UL
+#define NRF_SWI_BASE 0x40014000UL
+#define NRF_NVMC_BASE 0x4001E000UL
+#define NRF_PPI_BASE 0x4001F000UL
+#define NRF_FICR_BASE 0x10000000UL
+#define NRF_UICR_BASE 0x10001000UL
+#define NRF_GPIO_BASE 0x50000000UL
+
+
+/* ================================================================================ */
+/* ================ Peripheral declaration ================ */
+/* ================================================================================ */
+
+#define NRF_POWER ((NRF_POWER_Type *) NRF_POWER_BASE)
+#define NRF_CLOCK ((NRF_CLOCK_Type *) NRF_CLOCK_BASE)
+#define NRF_MPU ((NRF_MPU_Type *) NRF_MPU_BASE)
+#define NRF_PU ((NRF_PU_Type *) NRF_PU_BASE)
+#define NRF_AMLI ((NRF_AMLI_Type *) NRF_AMLI_BASE)
+#define NRF_RADIO ((NRF_RADIO_Type *) NRF_RADIO_BASE)
+#define NRF_UART0 ((NRF_UART_Type *) NRF_UART0_BASE)
+#define NRF_SPI0 ((NRF_SPI_Type *) NRF_SPI0_BASE)
+#define NRF_TWI0 ((NRF_TWI_Type *) NRF_TWI0_BASE)
+#define NRF_SPI1 ((NRF_SPI_Type *) NRF_SPI1_BASE)
+#define NRF_TWI1 ((NRF_TWI_Type *) NRF_TWI1_BASE)
+#define NRF_SPIS1 ((NRF_SPIS_Type *) NRF_SPIS1_BASE)
+#define NRF_GPIOTE ((NRF_GPIOTE_Type *) NRF_GPIOTE_BASE)
+#define NRF_ADC ((NRF_ADC_Type *) NRF_ADC_BASE)
+#define NRF_TIMER0 ((NRF_TIMER_Type *) NRF_TIMER0_BASE)
+#define NRF_TIMER1 ((NRF_TIMER_Type *) NRF_TIMER1_BASE)
+#define NRF_TIMER2 ((NRF_TIMER_Type *) NRF_TIMER2_BASE)
+#define NRF_RTC0 ((NRF_RTC_Type *) NRF_RTC0_BASE)
+#define NRF_TEMP ((NRF_TEMP_Type *) NRF_TEMP_BASE)
+#define NRF_RNG ((NRF_RNG_Type *) NRF_RNG_BASE)
+#define NRF_ECB ((NRF_ECB_Type *) NRF_ECB_BASE)
+#define NRF_AAR ((NRF_AAR_Type *) NRF_AAR_BASE)
+#define NRF_CCM ((NRF_CCM_Type *) NRF_CCM_BASE)
+#define NRF_WDT ((NRF_WDT_Type *) NRF_WDT_BASE)
+#define NRF_RTC1 ((NRF_RTC_Type *) NRF_RTC1_BASE)
+#define NRF_QDEC ((NRF_QDEC_Type *) NRF_QDEC_BASE)
+#define NRF_LPCOMP ((NRF_LPCOMP_Type *) NRF_LPCOMP_BASE)
+#define NRF_SWI ((NRF_SWI_Type *) NRF_SWI_BASE)
+#define NRF_NVMC ((NRF_NVMC_Type *) NRF_NVMC_BASE)
+#define NRF_PPI ((NRF_PPI_Type *) NRF_PPI_BASE)
+#define NRF_FICR ((NRF_FICR_Type *) NRF_FICR_BASE)
+#define NRF_UICR ((NRF_UICR_Type *) NRF_UICR_BASE)
+#define NRF_GPIO ((NRF_GPIO_Type *) NRF_GPIO_BASE)
+
+
+/** @} */ /* End of group Device_Peripheral_Registers */
+/** @} */ /* End of group nRF51 */
+/** @} */ /* End of group Nordic Semiconductor */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* nRF51_H */
+
diff --git a/bsp/nrf51822/Libraries/nrf51822/Include/nrf51_bitfields.h b/bsp/nrf51822/Libraries/nrf51822/Include/nrf51_bitfields.h
new file mode 100644
index 0000000000000000000000000000000000000000..29ac9830474be49659e00663189d16c3387cae11
--- /dev/null
+++ b/bsp/nrf51822/Libraries/nrf51822/Include/nrf51_bitfields.h
@@ -0,0 +1,6894 @@
+/* Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __NRF51_BITS_H
+#define __NRF51_BITS_H
+
+/*lint ++flb "Enter library region */
+
+#include
+
+/* Peripheral: AAR */
+/* Description: Accelerated Address Resolver. */
+
+/* Register: AAR_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on NOTRESOLVED event. */
+#define AAR_INTENSET_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
+#define AAR_INTENSET_NOTRESOLVED_Msk (0x1UL << AAR_INTENSET_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
+#define AAR_INTENSET_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENSET_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENSET_NOTRESOLVED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on RESOLVED event. */
+#define AAR_INTENSET_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
+#define AAR_INTENSET_RESOLVED_Msk (0x1UL << AAR_INTENSET_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
+#define AAR_INTENSET_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENSET_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENSET_RESOLVED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on END event. */
+#define AAR_INTENSET_END_Pos (0UL) /*!< Position of END field. */
+#define AAR_INTENSET_END_Msk (0x1UL << AAR_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define AAR_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: AAR_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on NOTRESOLVED event. */
+#define AAR_INTENCLR_NOTRESOLVED_Pos (2UL) /*!< Position of NOTRESOLVED field. */
+#define AAR_INTENCLR_NOTRESOLVED_Msk (0x1UL << AAR_INTENCLR_NOTRESOLVED_Pos) /*!< Bit mask of NOTRESOLVED field. */
+#define AAR_INTENCLR_NOTRESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENCLR_NOTRESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENCLR_NOTRESOLVED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on RESOLVED event. */
+#define AAR_INTENCLR_RESOLVED_Pos (1UL) /*!< Position of RESOLVED field. */
+#define AAR_INTENCLR_RESOLVED_Msk (0x1UL << AAR_INTENCLR_RESOLVED_Pos) /*!< Bit mask of RESOLVED field. */
+#define AAR_INTENCLR_RESOLVED_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENCLR_RESOLVED_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENCLR_RESOLVED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on ENDKSGEN event. */
+#define AAR_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
+#define AAR_INTENCLR_END_Msk (0x1UL << AAR_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define AAR_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define AAR_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define AAR_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: AAR_STATUS */
+/* Description: Resolution status. */
+
+/* Bits 3..0 : The IRK used last time an address was resolved. */
+#define AAR_STATUS_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define AAR_STATUS_STATUS_Msk (0xFUL << AAR_STATUS_STATUS_Pos) /*!< Bit mask of STATUS field. */
+
+/* Register: AAR_ENABLE */
+/* Description: Enable AAR. */
+
+/* Bits 1..0 : Enable AAR. */
+#define AAR_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define AAR_ENABLE_ENABLE_Msk (0x3UL << AAR_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define AAR_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled AAR. */
+#define AAR_ENABLE_ENABLE_Enabled (0x03UL) /*!< Enable AAR. */
+
+/* Register: AAR_NIRK */
+/* Description: Number of Identity root Keys in the IRK data structure. */
+
+/* Bits 4..0 : Number of Identity root Keys in the IRK data structure. */
+#define AAR_NIRK_NIRK_Pos (0UL) /*!< Position of NIRK field. */
+#define AAR_NIRK_NIRK_Msk (0x1FUL << AAR_NIRK_NIRK_Pos) /*!< Bit mask of NIRK field. */
+
+/* Register: AAR_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define AAR_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define AAR_POWER_POWER_Msk (0x1UL << AAR_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define AAR_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define AAR_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: ADC */
+/* Description: Analog to digital converter. */
+
+/* Register: ADC_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 0 : Enable interrupt on END event. */
+#define ADC_INTENSET_END_Pos (0UL) /*!< Position of END field. */
+#define ADC_INTENSET_END_Msk (0x1UL << ADC_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define ADC_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define ADC_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define ADC_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: ADC_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 0 : Disable interrupt on END event. */
+#define ADC_INTENCLR_END_Pos (0UL) /*!< Position of END field. */
+#define ADC_INTENCLR_END_Msk (0x1UL << ADC_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define ADC_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define ADC_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define ADC_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: ADC_BUSY */
+/* Description: ADC busy register. */
+
+/* Bit 0 : ADC busy register. */
+#define ADC_BUSY_BUSY_Pos (0UL) /*!< Position of BUSY field. */
+#define ADC_BUSY_BUSY_Msk (0x1UL << ADC_BUSY_BUSY_Pos) /*!< Bit mask of BUSY field. */
+#define ADC_BUSY_BUSY_Ready (0UL) /*!< No ongoing ADC conversion is taking place. ADC is ready. */
+#define ADC_BUSY_BUSY_Busy (1UL) /*!< An ADC conversion is taking place. ADC is busy. */
+
+/* Register: ADC_ENABLE */
+/* Description: ADC enable. */
+
+/* Bits 1..0 : ADC enable. */
+#define ADC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define ADC_ENABLE_ENABLE_Msk (0x3UL << ADC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define ADC_ENABLE_ENABLE_Disabled (0x00UL) /*!< ADC is disabled. */
+#define ADC_ENABLE_ENABLE_Enabled (0x01UL) /*!< ADC is enabled. If an analog input pin is selected as source of the conversion, the selected pin is configured as an analog input. */
+
+/* Register: ADC_CONFIG */
+/* Description: ADC configuration register. */
+
+/* Bits 17..16 : ADC external reference pin selection. */
+#define ADC_CONFIG_EXTREFSEL_Pos (16UL) /*!< Position of EXTREFSEL field. */
+#define ADC_CONFIG_EXTREFSEL_Msk (0x3UL << ADC_CONFIG_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
+#define ADC_CONFIG_EXTREFSEL_None (0UL) /*!< Analog external reference inputs disabled. */
+#define ADC_CONFIG_EXTREFSEL_AnalogReference0 (1UL) /*!< Use analog reference 0 as reference. */
+#define ADC_CONFIG_EXTREFSEL_AnalogReference1 (2UL) /*!< Use analog reference 1 as reference. */
+
+/* Bits 15..8 : ADC analog pin selection. */
+#define ADC_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
+#define ADC_CONFIG_PSEL_Msk (0xFFUL << ADC_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
+#define ADC_CONFIG_PSEL_Disabled (0UL) /*!< Analog input pins disabled. */
+#define ADC_CONFIG_PSEL_AnalogInput0 (1UL) /*!< Use analog input 0 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput1 (2UL) /*!< Use analog input 1 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput2 (4UL) /*!< Use analog input 2 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput3 (8UL) /*!< Use analog input 3 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput4 (16UL) /*!< Use analog input 4 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput5 (32UL) /*!< Use analog input 5 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput6 (64UL) /*!< Use analog input 6 as analog input. */
+#define ADC_CONFIG_PSEL_AnalogInput7 (128UL) /*!< Use analog input 7 as analog input. */
+
+/* Bits 6..5 : ADC reference selection. */
+#define ADC_CONFIG_REFSEL_Pos (5UL) /*!< Position of REFSEL field. */
+#define ADC_CONFIG_REFSEL_Msk (0x3UL << ADC_CONFIG_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define ADC_CONFIG_REFSEL_VBG (0x00UL) /*!< Use internal 1.2V bandgap voltage as reference for conversion. */
+#define ADC_CONFIG_REFSEL_External (0x01UL) /*!< Use external source configured by EXTREFSEL as reference for conversion. */
+#define ADC_CONFIG_REFSEL_SupplyOneHalfPrescaling (0x02UL) /*!< Use supply voltage with 1/2 prescaling as reference for conversion. Only usable when supply voltage is between 1.7V and 2.6V. */
+#define ADC_CONFIG_REFSEL_SupplyOneThirdPrescaling (0x03UL) /*!< Use supply voltage with 1/3 prescaling as reference for conversion. Only usable when supply voltage is between 2.5V and 3.6V. */
+
+/* Bits 4..2 : ADC input selection. */
+#define ADC_CONFIG_INPSEL_Pos (2UL) /*!< Position of INPSEL field. */
+#define ADC_CONFIG_INPSEL_Msk (0x7UL << ADC_CONFIG_INPSEL_Pos) /*!< Bit mask of INPSEL field. */
+#define ADC_CONFIG_INPSEL_AnalogInputNoPrescaling (0x00UL) /*!< Analog input specified by PSEL with no prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_AnalogInputTwoThirdsPrescaling (0x01UL) /*!< Analog input specified by PSEL with 2/3 prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_AnalogInputOneThirdPrescaling (0x02UL) /*!< Analog input specified by PSEL with 1/3 prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_SupplyTwoThirdsPrescaling (0x05UL) /*!< Supply voltage with 2/3 prescaling used as input for the conversion. */
+#define ADC_CONFIG_INPSEL_SupplyOneThirdPrescaling (0x06UL) /*!< Supply voltage with 1/3 prescaling used as input for the conversion. */
+
+/* Bits 1..0 : ADC resolution. */
+#define ADC_CONFIG_RES_Pos (0UL) /*!< Position of RES field. */
+#define ADC_CONFIG_RES_Msk (0x3UL << ADC_CONFIG_RES_Pos) /*!< Bit mask of RES field. */
+#define ADC_CONFIG_RES_8bit (0x00UL) /*!< 8bit ADC resolution. */
+#define ADC_CONFIG_RES_9bit (0x01UL) /*!< 9bit ADC resolution. */
+#define ADC_CONFIG_RES_10bit (0x02UL) /*!< 10bit ADC resolution. */
+
+/* Register: ADC_RESULT */
+/* Description: Result of ADC conversion. */
+
+/* Bits 9..0 : Result of ADC conversion. */
+#define ADC_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
+#define ADC_RESULT_RESULT_Msk (0x3FFUL << ADC_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
+
+/* Register: ADC_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define ADC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define ADC_POWER_POWER_Msk (0x1UL << ADC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define ADC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define ADC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: AMLI */
+/* Description: AHB Multi-Layer Interface. */
+
+/* Register: AMLI_RAMPRI_CPU0 */
+/* Description: Configurable priority configuration register for CPU0. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_CPU0_RAM7_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_CPU0_RAM6_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_CPU0_RAM5_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_CPU0_RAM4_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_CPU0_RAM3_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_CPU0_RAM2_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_CPU0_RAM1_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_CPU0_RAM0_Msk (0xFUL << AMLI_RAMPRI_CPU0_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CPU0_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_SPIS1 */
+/* Description: Configurable priority configuration register for SPIS1. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Msk (0xFUL << AMLI_RAMPRI_SPIS1_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_SPIS1_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_RADIO */
+/* Description: Configurable priority configuration register for RADIO. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_RADIO_RAM7_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_RADIO_RAM6_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_RADIO_RAM5_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_RADIO_RAM4_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_RADIO_RAM3_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_RADIO_RAM2_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_RADIO_RAM1_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_RADIO_RAM0_Msk (0xFUL << AMLI_RAMPRI_RADIO_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_RADIO_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_ECB */
+/* Description: Configurable priority configuration register for ECB. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_ECB_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_ECB_RAM7_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_ECB_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_ECB_RAM6_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_ECB_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_ECB_RAM5_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_ECB_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_ECB_RAM4_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_ECB_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_ECB_RAM3_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_ECB_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_ECB_RAM2_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_ECB_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_ECB_RAM1_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_ECB_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_ECB_RAM0_Msk (0xFUL << AMLI_RAMPRI_ECB_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_ECB_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_CCM */
+/* Description: Configurable priority configuration register for CCM. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_CCM_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_CCM_RAM7_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_CCM_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_CCM_RAM6_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_CCM_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_CCM_RAM5_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_CCM_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_CCM_RAM4_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_CCM_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_CCM_RAM3_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_CCM_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_CCM_RAM2_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_CCM_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_CCM_RAM1_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_CCM_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_CCM_RAM0_Msk (0xFUL << AMLI_RAMPRI_CCM_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_CCM_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Register: AMLI_RAMPRI_AAR */
+/* Description: Configurable priority configuration register for AAR. */
+
+/* Bits 31..28 : Configuration field for RAM block 7. */
+#define AMLI_RAMPRI_AAR_RAM7_Pos (28UL) /*!< Position of RAM7 field. */
+#define AMLI_RAMPRI_AAR_RAM7_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM7_Pos) /*!< Bit mask of RAM7 field. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM7_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 27..24 : Configuration field for RAM block 6. */
+#define AMLI_RAMPRI_AAR_RAM6_Pos (24UL) /*!< Position of RAM6 field. */
+#define AMLI_RAMPRI_AAR_RAM6_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM6_Pos) /*!< Bit mask of RAM6 field. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM6_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 23..20 : Configuration field for RAM block 5. */
+#define AMLI_RAMPRI_AAR_RAM5_Pos (20UL) /*!< Position of RAM5 field. */
+#define AMLI_RAMPRI_AAR_RAM5_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM5_Pos) /*!< Bit mask of RAM5 field. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM5_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 19..16 : Configuration field for RAM block 4. */
+#define AMLI_RAMPRI_AAR_RAM4_Pos (16UL) /*!< Position of RAM4 field. */
+#define AMLI_RAMPRI_AAR_RAM4_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM4_Pos) /*!< Bit mask of RAM4 field. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM4_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 15..12 : Configuration field for RAM block 3. */
+#define AMLI_RAMPRI_AAR_RAM3_Pos (12UL) /*!< Position of RAM3 field. */
+#define AMLI_RAMPRI_AAR_RAM3_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM3_Pos) /*!< Bit mask of RAM3 field. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM3_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 11..8 : Configuration field for RAM block 2. */
+#define AMLI_RAMPRI_AAR_RAM2_Pos (8UL) /*!< Position of RAM2 field. */
+#define AMLI_RAMPRI_AAR_RAM2_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM2_Pos) /*!< Bit mask of RAM2 field. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM2_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 7..4 : Configuration field for RAM block 1. */
+#define AMLI_RAMPRI_AAR_RAM1_Pos (4UL) /*!< Position of RAM1 field. */
+#define AMLI_RAMPRI_AAR_RAM1_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM1_Pos) /*!< Bit mask of RAM1 field. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM1_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Bits 3..0 : Configuration field for RAM block 0. */
+#define AMLI_RAMPRI_AAR_RAM0_Pos (0UL) /*!< Position of RAM0 field. */
+#define AMLI_RAMPRI_AAR_RAM0_Msk (0xFUL << AMLI_RAMPRI_AAR_RAM0_Pos) /*!< Bit mask of RAM0 field. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri0 (0x0UL) /*!< Priority 0. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri2 (0x2UL) /*!< Priority 2. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri4 (0x4UL) /*!< Priority 4. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri6 (0x6UL) /*!< Priority 6. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri8 (0x8UL) /*!< Priority 8. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri10 (0xAUL) /*!< Priority 10. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri12 (0xCUL) /*!< Priority 12. */
+#define AMLI_RAMPRI_AAR_RAM0_Pri14 (0xEUL) /*!< Priority 14. */
+
+/* Peripheral: CCM */
+/* Description: AES CCM Mode Encryption. */
+
+/* Register: CCM_SHORTS */
+/* Description: Shortcuts for the CCM. */
+
+/* Bit 0 : Shortcut between ENDKSGEN event and CRYPT task. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Pos (0UL) /*!< Position of ENDKSGEN_CRYPT field. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Msk (0x1UL << CCM_SHORTS_ENDKSGEN_CRYPT_Pos) /*!< Bit mask of ENDKSGEN_CRYPT field. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Disabled (0UL) /*!< Shortcut disabled. */
+#define CCM_SHORTS_ENDKSGEN_CRYPT_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: CCM_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on ERROR event. */
+#define CCM_INTENSET_ERROR_Pos (2UL) /*!< Position of ERROR field. */
+#define CCM_INTENSET_ERROR_Msk (0x1UL << CCM_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define CCM_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on ENDCRYPT event. */
+#define CCM_INTENSET_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
+#define CCM_INTENSET_ENDCRYPT_Msk (0x1UL << CCM_INTENSET_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
+#define CCM_INTENSET_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENSET_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENSET_ENDCRYPT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on ENDKSGEN event. */
+#define CCM_INTENSET_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
+#define CCM_INTENSET_ENDKSGEN_Msk (0x1UL << CCM_INTENSET_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
+#define CCM_INTENSET_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENSET_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENSET_ENDKSGEN_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: CCM_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on ERROR event. */
+#define CCM_INTENCLR_ERROR_Pos (2UL) /*!< Position of ERROR field. */
+#define CCM_INTENCLR_ERROR_Msk (0x1UL << CCM_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define CCM_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on ENDCRYPT event. */
+#define CCM_INTENCLR_ENDCRYPT_Pos (1UL) /*!< Position of ENDCRYPT field. */
+#define CCM_INTENCLR_ENDCRYPT_Msk (0x1UL << CCM_INTENCLR_ENDCRYPT_Pos) /*!< Bit mask of ENDCRYPT field. */
+#define CCM_INTENCLR_ENDCRYPT_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENCLR_ENDCRYPT_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENCLR_ENDCRYPT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on ENDKSGEN event. */
+#define CCM_INTENCLR_ENDKSGEN_Pos (0UL) /*!< Position of ENDKSGEN field. */
+#define CCM_INTENCLR_ENDKSGEN_Msk (0x1UL << CCM_INTENCLR_ENDKSGEN_Pos) /*!< Bit mask of ENDKSGEN field. */
+#define CCM_INTENCLR_ENDKSGEN_Disabled (0UL) /*!< Interrupt disabled. */
+#define CCM_INTENCLR_ENDKSGEN_Enabled (1UL) /*!< Interrupt enabled. */
+#define CCM_INTENCLR_ENDKSGEN_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: CCM_MICSTATUS */
+/* Description: CCM RX MIC check result. */
+
+/* Bit 0 : Result of the MIC check performed during the previous CCM RX STARTCRYPT */
+#define CCM_MICSTATUS_MICSTATUS_Pos (0UL) /*!< Position of MICSTATUS field. */
+#define CCM_MICSTATUS_MICSTATUS_Msk (0x1UL << CCM_MICSTATUS_MICSTATUS_Pos) /*!< Bit mask of MICSTATUS field. */
+#define CCM_MICSTATUS_MICSTATUS_CheckFailed (0UL) /*!< MIC check failed. */
+#define CCM_MICSTATUS_MICSTATUS_CheckPassed (1UL) /*!< MIC check passed. */
+
+/* Register: CCM_ENABLE */
+/* Description: CCM enable. */
+
+/* Bits 1..0 : CCM enable. */
+#define CCM_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define CCM_ENABLE_ENABLE_Msk (0x3UL << CCM_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define CCM_ENABLE_ENABLE_Disabled (0x00UL) /*!< CCM is disabled. */
+#define CCM_ENABLE_ENABLE_Enabled (0x02UL) /*!< CCM is enabled. */
+
+/* Register: CCM_MODE */
+/* Description: Operation mode. */
+
+/* Bit 0 : CCM mode operation. */
+#define CCM_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define CCM_MODE_MODE_Msk (0x1UL << CCM_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define CCM_MODE_MODE_Encryption (0UL) /*!< CCM mode TX */
+#define CCM_MODE_MODE_Decryption (1UL) /*!< CCM mode TX */
+
+/* Register: CCM_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define CCM_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define CCM_POWER_POWER_Msk (0x1UL << CCM_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define CCM_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define CCM_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: CLOCK */
+/* Description: Clock control. */
+
+/* Register: CLOCK_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 4 : Enable interrupt on CTTO event. */
+#define CLOCK_INTENSET_CTTO_Pos (4UL) /*!< Position of CTTO field. */
+#define CLOCK_INTENSET_CTTO_Msk (0x1UL << CLOCK_INTENSET_CTTO_Pos) /*!< Bit mask of CTTO field. */
+#define CLOCK_INTENSET_CTTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_CTTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_CTTO_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 3 : Enable interrupt on DONE event. */
+#define CLOCK_INTENSET_DONE_Pos (3UL) /*!< Position of DONE field. */
+#define CLOCK_INTENSET_DONE_Msk (0x1UL << CLOCK_INTENSET_DONE_Pos) /*!< Bit mask of DONE field. */
+#define CLOCK_INTENSET_DONE_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_DONE_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_DONE_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on LFCLKSTARTED event. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_LFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on HFCLKSTARTED event. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENSET_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENSET_HFCLKSTARTED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: CLOCK_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 4 : Disable interrupt on CTTO event. */
+#define CLOCK_INTENCLR_CTTO_Pos (4UL) /*!< Position of CTTO field. */
+#define CLOCK_INTENCLR_CTTO_Msk (0x1UL << CLOCK_INTENCLR_CTTO_Pos) /*!< Bit mask of CTTO field. */
+#define CLOCK_INTENCLR_CTTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_CTTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_CTTO_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 3 : Disable interrupt on DONE event. */
+#define CLOCK_INTENCLR_DONE_Pos (3UL) /*!< Position of DONE field. */
+#define CLOCK_INTENCLR_DONE_Msk (0x1UL << CLOCK_INTENCLR_DONE_Pos) /*!< Bit mask of DONE field. */
+#define CLOCK_INTENCLR_DONE_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_DONE_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_DONE_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on LFCLKSTARTED event. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Pos (1UL) /*!< Position of LFCLKSTARTED field. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_LFCLKSTARTED_Pos) /*!< Bit mask of LFCLKSTARTED field. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_LFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on HFCLKSTARTED event. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Pos (0UL) /*!< Position of HFCLKSTARTED field. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Msk (0x1UL << CLOCK_INTENCLR_HFCLKSTARTED_Pos) /*!< Bit mask of HFCLKSTARTED field. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Disabled (0UL) /*!< Interrupt disabled. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Enabled (1UL) /*!< Interrupt enabled. */
+#define CLOCK_INTENCLR_HFCLKSTARTED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: CLOCK_HFCLKRUN */
+/* Description: Task HFCLKSTART trigger status. */
+
+/* Bit 0 : Task HFCLKSTART trigger status. */
+#define CLOCK_HFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define CLOCK_HFCLKRUN_STATUS_Msk (0x1UL << CLOCK_HFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define CLOCK_HFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task HFCLKSTART has not been triggered. */
+#define CLOCK_HFCLKRUN_STATUS_Triggered (1UL) /*!< Task HFCLKSTART has been triggered. */
+
+/* Register: CLOCK_HFCLKSTAT */
+/* Description: High frequency clock status. */
+
+/* Bit 16 : State for the HFCLK. */
+#define CLOCK_HFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
+#define CLOCK_HFCLKSTAT_STATE_Msk (0x1UL << CLOCK_HFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
+#define CLOCK_HFCLKSTAT_STATE_NotRunning (0UL) /*!< HFCLK clock not running. */
+#define CLOCK_HFCLKSTAT_STATE_Running (1UL) /*!< HFCLK clock running. */
+
+/* Bit 0 : Active clock source for the HF clock. */
+#define CLOCK_HFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_HFCLKSTAT_SRC_Msk (0x1UL << CLOCK_HFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_HFCLKSTAT_SRC_RC (0UL) /*!< Internal 16MHz RC oscillator running and generating the HFCLK clock. */
+#define CLOCK_HFCLKSTAT_SRC_Xtal (1UL) /*!< External 16MHz/32MHz crystal oscillator running and generating the HFCLK clock. */
+
+/* Register: CLOCK_LFCLKRUN */
+/* Description: Task LFCLKSTART triggered status. */
+
+/* Bit 0 : Task LFCLKSTART triggered status. */
+#define CLOCK_LFCLKRUN_STATUS_Pos (0UL) /*!< Position of STATUS field. */
+#define CLOCK_LFCLKRUN_STATUS_Msk (0x1UL << CLOCK_LFCLKRUN_STATUS_Pos) /*!< Bit mask of STATUS field. */
+#define CLOCK_LFCLKRUN_STATUS_NotTriggered (0UL) /*!< Task LFCLKSTART has not been triggered. */
+#define CLOCK_LFCLKRUN_STATUS_Triggered (1UL) /*!< Task LFCLKSTART has been triggered. */
+
+/* Register: CLOCK_LFCLKSTAT */
+/* Description: Low frequency clock status. */
+
+/* Bit 16 : State for the LF clock. */
+#define CLOCK_LFCLKSTAT_STATE_Pos (16UL) /*!< Position of STATE field. */
+#define CLOCK_LFCLKSTAT_STATE_Msk (0x1UL << CLOCK_LFCLKSTAT_STATE_Pos) /*!< Bit mask of STATE field. */
+#define CLOCK_LFCLKSTAT_STATE_NotRunning (0UL) /*!< LFCLK clock not running. */
+#define CLOCK_LFCLKSTAT_STATE_Running (1UL) /*!< LFCLK clock running. */
+
+/* Bits 1..0 : Active clock source for the LF clock. */
+#define CLOCK_LFCLKSTAT_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSTAT_SRC_Msk (0x3UL << CLOCK_LFCLKSTAT_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSTAT_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator running and generating the LFCLK clock. */
+#define CLOCK_LFCLKSTAT_SRC_Xtal (1UL) /*!< External 32KiHz crystal oscillator running and generating the LFCLK clock. */
+#define CLOCK_LFCLKSTAT_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from the HFCLK running and generating the LFCLK clock. */
+
+/* Register: CLOCK_LFCLKSRCCOPY */
+/* Description: Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */
+
+/* Bits 1..0 : Clock source for the LFCLK clock, set when task LKCLKSTART is triggered. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Msk (0x3UL << CLOCK_LFCLKSRCCOPY_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSRCCOPY_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */
+#define CLOCK_LFCLKSRCCOPY_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */
+
+/* Register: CLOCK_LFCLKSRC */
+/* Description: Clock source for the LFCLK clock. */
+
+/* Bits 1..0 : Clock source. */
+#define CLOCK_LFCLKSRC_SRC_Pos (0UL) /*!< Position of SRC field. */
+#define CLOCK_LFCLKSRC_SRC_Msk (0x3UL << CLOCK_LFCLKSRC_SRC_Pos) /*!< Bit mask of SRC field. */
+#define CLOCK_LFCLKSRC_SRC_RC (0UL) /*!< Internal 32KiHz RC oscillator. */
+#define CLOCK_LFCLKSRC_SRC_Xtal (1UL) /*!< External 32KiHz crystal. */
+#define CLOCK_LFCLKSRC_SRC_Synth (2UL) /*!< Internal 32KiHz synthesizer from HFCLK system clock. */
+
+/* Register: CLOCK_CTIV */
+/* Description: Calibration timer interval. */
+
+/* Bits 6..0 : Calibration timer interval in 0.25s resolution. */
+#define CLOCK_CTIV_CTIV_Pos (0UL) /*!< Position of CTIV field. */
+#define CLOCK_CTIV_CTIV_Msk (0x7FUL << CLOCK_CTIV_CTIV_Pos) /*!< Bit mask of CTIV field. */
+
+/* Register: CLOCK_XTALFREQ */
+/* Description: Crystal frequency. */
+
+/* Bits 7..0 : External Xtal frequency selection. */
+#define CLOCK_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */
+#define CLOCK_XTALFREQ_XTALFREQ_Msk (0xFFUL << CLOCK_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */
+#define CLOCK_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz xtal is used as source for the HFCLK oscillator. */
+#define CLOCK_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz xtal is used as source for the HFCLK oscillator. */
+
+
+/* Peripheral: ECB */
+/* Description: AES ECB Mode Encryption. */
+
+/* Register: ECB_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 1 : Enable interrupt on ERRORECB event. */
+#define ECB_INTENSET_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
+#define ECB_INTENSET_ERRORECB_Msk (0x1UL << ECB_INTENSET_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
+#define ECB_INTENSET_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENSET_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENSET_ERRORECB_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on ENDECB event. */
+#define ECB_INTENSET_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
+#define ECB_INTENSET_ENDECB_Msk (0x1UL << ECB_INTENSET_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
+#define ECB_INTENSET_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENSET_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENSET_ENDECB_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: ECB_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 1 : Disable interrupt on ERRORECB event. */
+#define ECB_INTENCLR_ERRORECB_Pos (1UL) /*!< Position of ERRORECB field. */
+#define ECB_INTENCLR_ERRORECB_Msk (0x1UL << ECB_INTENCLR_ERRORECB_Pos) /*!< Bit mask of ERRORECB field. */
+#define ECB_INTENCLR_ERRORECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENCLR_ERRORECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENCLR_ERRORECB_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on ENDECB event. */
+#define ECB_INTENCLR_ENDECB_Pos (0UL) /*!< Position of ENDECB field. */
+#define ECB_INTENCLR_ENDECB_Msk (0x1UL << ECB_INTENCLR_ENDECB_Pos) /*!< Bit mask of ENDECB field. */
+#define ECB_INTENCLR_ENDECB_Disabled (0UL) /*!< Interrupt disabled. */
+#define ECB_INTENCLR_ENDECB_Enabled (1UL) /*!< Interrupt enabled. */
+#define ECB_INTENCLR_ENDECB_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: ECB_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define ECB_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define ECB_POWER_POWER_Msk (0x1UL << ECB_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define ECB_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define ECB_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: FICR */
+/* Description: Factory Information Configuration. */
+
+/* Register: FICR_RBD */
+/* Description: RBD. */
+
+/* Bits 31..0 : RBD. */
+#define FICR_RBD_RBD_Pos (0UL) /*!< Position of RBD field. */
+#define FICR_RBD_RBD_Msk (0xFFFFFFFFUL << FICR_RBD_RBD_Pos) /*!< Bit mask of RBD field. */
+#define FICR_RBD_RBD_NoRoyalty (0xFFFFFFFEUL) /*!< No royalty. */
+#define FICR_RBD_RBD_Royalty (0xFFFFFFFFUL) /*!< Royalty. */
+
+/* Register: FICR_PPFC */
+/* Description: Pre-programmed factory code present. */
+
+/* Bits 7..0 : Pre-programmed factory code present. */
+#define FICR_PPFC_PPFC_Pos (0UL) /*!< Position of PPFC field. */
+#define FICR_PPFC_PPFC_Msk (0xFFUL << FICR_PPFC_PPFC_Pos) /*!< Bit mask of PPFC field. */
+#define FICR_PPFC_PPFC_NotPresent (0xFFUL) /*!< Not present. */
+#define FICR_PPFC_PPFC_Present (0x00UL) /*!< Present. */
+
+/* Register: FICR_CONFIGID */
+/* Description: Configuration identifier. */
+
+/* Bits 31..16 : Firmware Identification Number pre-loaded into the flash. */
+#define FICR_CONFIGID_FWID_Pos (16UL) /*!< Position of FWID field. */
+#define FICR_CONFIGID_FWID_Msk (0xFFFFUL << FICR_CONFIGID_FWID_Pos) /*!< Bit mask of FWID field. */
+
+/* Bits 15..0 : Hardware Identification Number. */
+#define FICR_CONFIGID_HWID_Pos (0UL) /*!< Position of HWID field. */
+#define FICR_CONFIGID_HWID_Msk (0xFFFFUL << FICR_CONFIGID_HWID_Pos) /*!< Bit mask of HWID field. */
+
+/* Register: FICR_DEVICEADDRTYPE */
+/* Description: Device address type. */
+
+/* Bit 0 : Device address type. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos (0UL) /*!< Position of DEVICEADDRTYPE field. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Msk (0x1UL << FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Pos) /*!< Bit mask of DEVICEADDRTYPE field. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Public (0UL) /*!< Public address. */
+#define FICR_DEVICEADDRTYPE_DEVICEADDRTYPE_Random (1UL) /*!< Random address. */
+
+/* Register: FICR_OVERRIDEEN */
+/* Description: Radio calibration override enable. */
+
+/* Bit 3 : Override default values for BLE_1Mbit mode. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_Pos (3UL) /*!< Position of BLE_1MBIT field. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_BLE_1MBIT_Pos) /*!< Bit mask of BLE_1MBIT field. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_Override (0UL) /*!< Override the default values for BLE_1Mbit mode. */
+#define FICR_OVERRIDEEN_BLE_1MBIT_NotOverride (1UL) /*!< Do not override the default values for BLE_1Mbit mode. */
+
+/* Bit 0 : Override default values for NRF_1Mbit mode. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_Pos (0UL) /*!< Position of NRF_1MBIT field. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_Msk (0x1UL << FICR_OVERRIDEEN_NRF_1MBIT_Pos) /*!< Bit mask of NRF_1MBIT field. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_Override (0UL) /*!< Override the default values for NRF_1Mbit mode. */
+#define FICR_OVERRIDEEN_NRF_1MBIT_NotOverride (1UL) /*!< Do not override the default values for NRF_1Mbit mode. */
+
+
+/* Peripheral: GPIO */
+/* Description: General purpose input and output. */
+
+/* Register: GPIO_OUT */
+/* Description: Write GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_OUT_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUT_PIN31_Msk (0x1UL << GPIO_OUT_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUT_PIN31_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN31_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_OUT_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUT_PIN30_Msk (0x1UL << GPIO_OUT_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUT_PIN30_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN30_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_OUT_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUT_PIN29_Msk (0x1UL << GPIO_OUT_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUT_PIN29_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN29_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_OUT_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUT_PIN28_Msk (0x1UL << GPIO_OUT_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUT_PIN28_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN28_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_OUT_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUT_PIN27_Msk (0x1UL << GPIO_OUT_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUT_PIN27_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN27_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_OUT_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUT_PIN26_Msk (0x1UL << GPIO_OUT_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUT_PIN26_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN26_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_OUT_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUT_PIN25_Msk (0x1UL << GPIO_OUT_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUT_PIN25_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN25_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_OUT_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUT_PIN24_Msk (0x1UL << GPIO_OUT_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUT_PIN24_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN24_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_OUT_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUT_PIN23_Msk (0x1UL << GPIO_OUT_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUT_PIN23_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN23_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_OUT_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUT_PIN22_Msk (0x1UL << GPIO_OUT_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUT_PIN22_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN22_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_OUT_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUT_PIN21_Msk (0x1UL << GPIO_OUT_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUT_PIN21_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN21_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_OUT_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUT_PIN20_Msk (0x1UL << GPIO_OUT_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUT_PIN20_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN20_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_OUT_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUT_PIN19_Msk (0x1UL << GPIO_OUT_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUT_PIN19_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN19_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_OUT_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUT_PIN18_Msk (0x1UL << GPIO_OUT_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUT_PIN18_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN18_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_OUT_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUT_PIN17_Msk (0x1UL << GPIO_OUT_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUT_PIN17_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN17_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_OUT_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUT_PIN16_Msk (0x1UL << GPIO_OUT_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUT_PIN16_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN16_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_OUT_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUT_PIN15_Msk (0x1UL << GPIO_OUT_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUT_PIN15_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN15_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_OUT_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUT_PIN14_Msk (0x1UL << GPIO_OUT_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUT_PIN14_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN14_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_OUT_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUT_PIN13_Msk (0x1UL << GPIO_OUT_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUT_PIN13_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN13_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_OUT_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUT_PIN12_Msk (0x1UL << GPIO_OUT_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUT_PIN12_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN12_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_OUT_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUT_PIN11_Msk (0x1UL << GPIO_OUT_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUT_PIN11_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN11_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_OUT_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUT_PIN10_Msk (0x1UL << GPIO_OUT_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUT_PIN10_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN10_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_OUT_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUT_PIN9_Msk (0x1UL << GPIO_OUT_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUT_PIN9_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN9_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_OUT_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUT_PIN8_Msk (0x1UL << GPIO_OUT_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUT_PIN8_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN8_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_OUT_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUT_PIN7_Msk (0x1UL << GPIO_OUT_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUT_PIN7_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN7_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_OUT_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUT_PIN6_Msk (0x1UL << GPIO_OUT_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUT_PIN6_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN6_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_OUT_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUT_PIN5_Msk (0x1UL << GPIO_OUT_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUT_PIN5_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN5_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_OUT_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUT_PIN4_Msk (0x1UL << GPIO_OUT_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUT_PIN4_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN4_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_OUT_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUT_PIN3_Msk (0x1UL << GPIO_OUT_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUT_PIN3_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN3_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_OUT_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUT_PIN2_Msk (0x1UL << GPIO_OUT_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUT_PIN2_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN2_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_OUT_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUT_PIN1_Msk (0x1UL << GPIO_OUT_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUT_PIN1_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN1_High (1UL) /*!< Pin driver is high. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_OUT_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUT_PIN0_Msk (0x1UL << GPIO_OUT_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUT_PIN0_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUT_PIN0_High (1UL) /*!< Pin driver is high. */
+
+/* Register: GPIO_OUTSET */
+/* Description: Set individual bits in GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_OUTSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUTSET_PIN31_Msk (0x1UL << GPIO_OUTSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUTSET_PIN31_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN31_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN31_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_OUTSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUTSET_PIN30_Msk (0x1UL << GPIO_OUTSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUTSET_PIN30_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN30_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN30_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_OUTSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUTSET_PIN29_Msk (0x1UL << GPIO_OUTSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUTSET_PIN29_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN29_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN29_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_OUTSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUTSET_PIN28_Msk (0x1UL << GPIO_OUTSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUTSET_PIN28_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN28_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN28_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_OUTSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUTSET_PIN27_Msk (0x1UL << GPIO_OUTSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUTSET_PIN27_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN27_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN27_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_OUTSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUTSET_PIN26_Msk (0x1UL << GPIO_OUTSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUTSET_PIN26_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN26_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN26_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_OUTSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUTSET_PIN25_Msk (0x1UL << GPIO_OUTSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUTSET_PIN25_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN25_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN25_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_OUTSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUTSET_PIN24_Msk (0x1UL << GPIO_OUTSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUTSET_PIN24_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN24_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN24_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_OUTSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUTSET_PIN23_Msk (0x1UL << GPIO_OUTSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUTSET_PIN23_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN23_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN23_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_OUTSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUTSET_PIN22_Msk (0x1UL << GPIO_OUTSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUTSET_PIN22_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN22_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN22_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_OUTSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUTSET_PIN21_Msk (0x1UL << GPIO_OUTSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUTSET_PIN21_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN21_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN21_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_OUTSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUTSET_PIN20_Msk (0x1UL << GPIO_OUTSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUTSET_PIN20_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN20_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN20_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_OUTSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUTSET_PIN19_Msk (0x1UL << GPIO_OUTSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUTSET_PIN19_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN19_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN19_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_OUTSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUTSET_PIN18_Msk (0x1UL << GPIO_OUTSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUTSET_PIN18_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN18_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN18_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_OUTSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUTSET_PIN17_Msk (0x1UL << GPIO_OUTSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUTSET_PIN17_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN17_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN17_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_OUTSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUTSET_PIN16_Msk (0x1UL << GPIO_OUTSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUTSET_PIN16_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN16_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN16_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_OUTSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUTSET_PIN15_Msk (0x1UL << GPIO_OUTSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUTSET_PIN15_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN15_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN15_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_OUTSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUTSET_PIN14_Msk (0x1UL << GPIO_OUTSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUTSET_PIN14_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN14_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN14_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_OUTSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUTSET_PIN13_Msk (0x1UL << GPIO_OUTSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUTSET_PIN13_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN13_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN13_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_OUTSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUTSET_PIN12_Msk (0x1UL << GPIO_OUTSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUTSET_PIN12_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN12_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN12_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_OUTSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUTSET_PIN11_Msk (0x1UL << GPIO_OUTSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUTSET_PIN11_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN11_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN11_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_OUTSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUTSET_PIN10_Msk (0x1UL << GPIO_OUTSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUTSET_PIN10_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN10_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN10_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_OUTSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUTSET_PIN9_Msk (0x1UL << GPIO_OUTSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUTSET_PIN9_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN9_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN9_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_OUTSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUTSET_PIN8_Msk (0x1UL << GPIO_OUTSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUTSET_PIN8_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN8_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN8_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_OUTSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUTSET_PIN7_Msk (0x1UL << GPIO_OUTSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUTSET_PIN7_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN7_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN7_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_OUTSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUTSET_PIN6_Msk (0x1UL << GPIO_OUTSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUTSET_PIN6_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN6_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN6_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_OUTSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUTSET_PIN5_Msk (0x1UL << GPIO_OUTSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUTSET_PIN5_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN5_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN5_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_OUTSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUTSET_PIN4_Msk (0x1UL << GPIO_OUTSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUTSET_PIN4_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN4_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN4_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_OUTSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUTSET_PIN3_Msk (0x1UL << GPIO_OUTSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUTSET_PIN3_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN3_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN3_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_OUTSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUTSET_PIN2_Msk (0x1UL << GPIO_OUTSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUTSET_PIN2_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN2_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN2_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_OUTSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUTSET_PIN1_Msk (0x1UL << GPIO_OUTSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUTSET_PIN1_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN1_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN1_Set (1UL) /*!< Set pin driver high. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_OUTSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUTSET_PIN0_Msk (0x1UL << GPIO_OUTSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUTSET_PIN0_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTSET_PIN0_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTSET_PIN0_Set (1UL) /*!< Set pin driver high. */
+
+/* Register: GPIO_OUTCLR */
+/* Description: Clear individual bits in GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_OUTCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_OUTCLR_PIN31_Msk (0x1UL << GPIO_OUTCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_OUTCLR_PIN31_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN31_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN31_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_OUTCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_OUTCLR_PIN30_Msk (0x1UL << GPIO_OUTCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_OUTCLR_PIN30_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN30_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN30_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_OUTCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_OUTCLR_PIN29_Msk (0x1UL << GPIO_OUTCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_OUTCLR_PIN29_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN29_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN29_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_OUTCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_OUTCLR_PIN28_Msk (0x1UL << GPIO_OUTCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_OUTCLR_PIN28_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN28_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN28_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_OUTCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_OUTCLR_PIN27_Msk (0x1UL << GPIO_OUTCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_OUTCLR_PIN27_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN27_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN27_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_OUTCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_OUTCLR_PIN26_Msk (0x1UL << GPIO_OUTCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_OUTCLR_PIN26_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN26_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN26_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_OUTCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_OUTCLR_PIN25_Msk (0x1UL << GPIO_OUTCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_OUTCLR_PIN25_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN25_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN25_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_OUTCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_OUTCLR_PIN24_Msk (0x1UL << GPIO_OUTCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_OUTCLR_PIN24_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN24_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN24_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_OUTCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_OUTCLR_PIN23_Msk (0x1UL << GPIO_OUTCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_OUTCLR_PIN23_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN23_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN23_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_OUTCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_OUTCLR_PIN22_Msk (0x1UL << GPIO_OUTCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_OUTCLR_PIN22_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN22_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN22_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_OUTCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_OUTCLR_PIN21_Msk (0x1UL << GPIO_OUTCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_OUTCLR_PIN21_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN21_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN21_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_OUTCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_OUTCLR_PIN20_Msk (0x1UL << GPIO_OUTCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_OUTCLR_PIN20_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN20_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN20_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_OUTCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_OUTCLR_PIN19_Msk (0x1UL << GPIO_OUTCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_OUTCLR_PIN19_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN19_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN19_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_OUTCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_OUTCLR_PIN18_Msk (0x1UL << GPIO_OUTCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_OUTCLR_PIN18_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN18_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN18_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_OUTCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_OUTCLR_PIN17_Msk (0x1UL << GPIO_OUTCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_OUTCLR_PIN17_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN17_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN17_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_OUTCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_OUTCLR_PIN16_Msk (0x1UL << GPIO_OUTCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_OUTCLR_PIN16_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN16_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN16_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_OUTCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_OUTCLR_PIN15_Msk (0x1UL << GPIO_OUTCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_OUTCLR_PIN15_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN15_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN15_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_OUTCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_OUTCLR_PIN14_Msk (0x1UL << GPIO_OUTCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_OUTCLR_PIN14_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN14_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN14_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_OUTCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_OUTCLR_PIN13_Msk (0x1UL << GPIO_OUTCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_OUTCLR_PIN13_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN13_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN13_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_OUTCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_OUTCLR_PIN12_Msk (0x1UL << GPIO_OUTCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_OUTCLR_PIN12_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN12_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN12_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_OUTCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_OUTCLR_PIN11_Msk (0x1UL << GPIO_OUTCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_OUTCLR_PIN11_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN11_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN11_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_OUTCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_OUTCLR_PIN10_Msk (0x1UL << GPIO_OUTCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_OUTCLR_PIN10_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN10_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN10_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_OUTCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_OUTCLR_PIN9_Msk (0x1UL << GPIO_OUTCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_OUTCLR_PIN9_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN9_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN9_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_OUTCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_OUTCLR_PIN8_Msk (0x1UL << GPIO_OUTCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_OUTCLR_PIN8_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN8_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN8_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_OUTCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_OUTCLR_PIN7_Msk (0x1UL << GPIO_OUTCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_OUTCLR_PIN7_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN7_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN7_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_OUTCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_OUTCLR_PIN6_Msk (0x1UL << GPIO_OUTCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_OUTCLR_PIN6_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN6_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN6_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_OUTCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_OUTCLR_PIN5_Msk (0x1UL << GPIO_OUTCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_OUTCLR_PIN5_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN5_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN5_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_OUTCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_OUTCLR_PIN4_Msk (0x1UL << GPIO_OUTCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_OUTCLR_PIN4_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN4_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN4_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_OUTCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_OUTCLR_PIN3_Msk (0x1UL << GPIO_OUTCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_OUTCLR_PIN3_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN3_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN3_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_OUTCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_OUTCLR_PIN2_Msk (0x1UL << GPIO_OUTCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_OUTCLR_PIN2_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN2_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN2_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_OUTCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_OUTCLR_PIN1_Msk (0x1UL << GPIO_OUTCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_OUTCLR_PIN1_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN1_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN1_Clear (1UL) /*!< Set pin driver low. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_OUTCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_OUTCLR_PIN0_Msk (0x1UL << GPIO_OUTCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_OUTCLR_PIN0_Low (0UL) /*!< Pin driver is low. */
+#define GPIO_OUTCLR_PIN0_High (1UL) /*!< Pin driver is high. */
+#define GPIO_OUTCLR_PIN0_Clear (1UL) /*!< Set pin driver low. */
+
+/* Register: GPIO_IN */
+/* Description: Read GPIO port. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_IN_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_IN_PIN31_Msk (0x1UL << GPIO_IN_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_IN_PIN31_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN31_High (1UL) /*!< Pin input is high. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_IN_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_IN_PIN30_Msk (0x1UL << GPIO_IN_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_IN_PIN30_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN30_High (1UL) /*!< Pin input is high. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_IN_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_IN_PIN29_Msk (0x1UL << GPIO_IN_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_IN_PIN29_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN29_High (1UL) /*!< Pin input is high. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_IN_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_IN_PIN28_Msk (0x1UL << GPIO_IN_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_IN_PIN28_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN28_High (1UL) /*!< Pin input is high. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_IN_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_IN_PIN27_Msk (0x1UL << GPIO_IN_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_IN_PIN27_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN27_High (1UL) /*!< Pin input is high. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_IN_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_IN_PIN26_Msk (0x1UL << GPIO_IN_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_IN_PIN26_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN26_High (1UL) /*!< Pin input is high. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_IN_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_IN_PIN25_Msk (0x1UL << GPIO_IN_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_IN_PIN25_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN25_High (1UL) /*!< Pin input is high. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_IN_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_IN_PIN24_Msk (0x1UL << GPIO_IN_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_IN_PIN24_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN24_High (1UL) /*!< Pin input is high. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_IN_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_IN_PIN23_Msk (0x1UL << GPIO_IN_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_IN_PIN23_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN23_High (1UL) /*!< Pin input is high. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_IN_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_IN_PIN22_Msk (0x1UL << GPIO_IN_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_IN_PIN22_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN22_High (1UL) /*!< Pin input is high. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_IN_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_IN_PIN21_Msk (0x1UL << GPIO_IN_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_IN_PIN21_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN21_High (1UL) /*!< Pin input is high. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_IN_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_IN_PIN20_Msk (0x1UL << GPIO_IN_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_IN_PIN20_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN20_High (1UL) /*!< Pin input is high. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_IN_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_IN_PIN19_Msk (0x1UL << GPIO_IN_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_IN_PIN19_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN19_High (1UL) /*!< Pin input is high. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_IN_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_IN_PIN18_Msk (0x1UL << GPIO_IN_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_IN_PIN18_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN18_High (1UL) /*!< Pin input is high. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_IN_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_IN_PIN17_Msk (0x1UL << GPIO_IN_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_IN_PIN17_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN17_High (1UL) /*!< Pin input is high. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_IN_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_IN_PIN16_Msk (0x1UL << GPIO_IN_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_IN_PIN16_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN16_High (1UL) /*!< Pin input is high. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_IN_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_IN_PIN15_Msk (0x1UL << GPIO_IN_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_IN_PIN15_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN15_High (1UL) /*!< Pin input is high. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_IN_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_IN_PIN14_Msk (0x1UL << GPIO_IN_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_IN_PIN14_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN14_High (1UL) /*!< Pin input is high. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_IN_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_IN_PIN13_Msk (0x1UL << GPIO_IN_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_IN_PIN13_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN13_High (1UL) /*!< Pin input is high. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_IN_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_IN_PIN12_Msk (0x1UL << GPIO_IN_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_IN_PIN12_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN12_High (1UL) /*!< Pin input is high. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_IN_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_IN_PIN11_Msk (0x1UL << GPIO_IN_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_IN_PIN11_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN11_High (1UL) /*!< Pin input is high. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_IN_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_IN_PIN10_Msk (0x1UL << GPIO_IN_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_IN_PIN10_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN10_High (1UL) /*!< Pin input is high. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_IN_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_IN_PIN9_Msk (0x1UL << GPIO_IN_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_IN_PIN9_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN9_High (1UL) /*!< Pin input is high. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_IN_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_IN_PIN8_Msk (0x1UL << GPIO_IN_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_IN_PIN8_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN8_High (1UL) /*!< Pin input is high. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_IN_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_IN_PIN7_Msk (0x1UL << GPIO_IN_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_IN_PIN7_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN7_High (1UL) /*!< Pin input is high. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_IN_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_IN_PIN6_Msk (0x1UL << GPIO_IN_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_IN_PIN6_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN6_High (1UL) /*!< Pin input is high. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_IN_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_IN_PIN5_Msk (0x1UL << GPIO_IN_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_IN_PIN5_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN5_High (1UL) /*!< Pin input is high. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_IN_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_IN_PIN4_Msk (0x1UL << GPIO_IN_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_IN_PIN4_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN4_High (1UL) /*!< Pin input is high. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_IN_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_IN_PIN3_Msk (0x1UL << GPIO_IN_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_IN_PIN3_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN3_High (1UL) /*!< Pin input is high. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_IN_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_IN_PIN2_Msk (0x1UL << GPIO_IN_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_IN_PIN2_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN2_High (1UL) /*!< Pin input is high. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_IN_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_IN_PIN1_Msk (0x1UL << GPIO_IN_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_IN_PIN1_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN1_High (1UL) /*!< Pin input is high. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_IN_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_IN_PIN0_Msk (0x1UL << GPIO_IN_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_IN_PIN0_Low (0UL) /*!< Pin input is low. */
+#define GPIO_IN_PIN0_High (1UL) /*!< Pin input is high. */
+
+/* Register: GPIO_DIR */
+/* Description: Direction of GPIO pins. */
+
+/* Bit 31 : Pin 31. */
+#define GPIO_DIR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIR_PIN31_Msk (0x1UL << GPIO_DIR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIR_PIN31_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN31_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 30 : Pin 30. */
+#define GPIO_DIR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIR_PIN30_Msk (0x1UL << GPIO_DIR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIR_PIN30_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN30_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 29 : Pin 29. */
+#define GPIO_DIR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIR_PIN29_Msk (0x1UL << GPIO_DIR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIR_PIN29_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN29_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 28 : Pin 28. */
+#define GPIO_DIR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIR_PIN28_Msk (0x1UL << GPIO_DIR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIR_PIN28_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN28_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 27 : Pin 27. */
+#define GPIO_DIR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIR_PIN27_Msk (0x1UL << GPIO_DIR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIR_PIN27_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN27_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 26 : Pin 26. */
+#define GPIO_DIR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIR_PIN26_Msk (0x1UL << GPIO_DIR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIR_PIN26_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN26_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 25 : Pin 25. */
+#define GPIO_DIR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIR_PIN25_Msk (0x1UL << GPIO_DIR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIR_PIN25_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN25_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 24 : Pin 24. */
+#define GPIO_DIR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIR_PIN24_Msk (0x1UL << GPIO_DIR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIR_PIN24_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN24_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 23 : Pin 23. */
+#define GPIO_DIR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIR_PIN23_Msk (0x1UL << GPIO_DIR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIR_PIN23_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN23_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 22 : Pin 22. */
+#define GPIO_DIR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIR_PIN22_Msk (0x1UL << GPIO_DIR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIR_PIN22_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN22_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 21 : Pin 21. */
+#define GPIO_DIR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIR_PIN21_Msk (0x1UL << GPIO_DIR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIR_PIN21_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN21_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 20 : Pin 20. */
+#define GPIO_DIR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIR_PIN20_Msk (0x1UL << GPIO_DIR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIR_PIN20_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN20_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 19 : Pin 19. */
+#define GPIO_DIR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIR_PIN19_Msk (0x1UL << GPIO_DIR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIR_PIN19_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN19_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 18 : Pin 18. */
+#define GPIO_DIR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIR_PIN18_Msk (0x1UL << GPIO_DIR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIR_PIN18_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN18_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 17 : Pin 17. */
+#define GPIO_DIR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIR_PIN17_Msk (0x1UL << GPIO_DIR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIR_PIN17_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN17_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 16 : Pin 16. */
+#define GPIO_DIR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIR_PIN16_Msk (0x1UL << GPIO_DIR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIR_PIN16_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN16_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 15 : Pin 15. */
+#define GPIO_DIR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIR_PIN15_Msk (0x1UL << GPIO_DIR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIR_PIN15_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN15_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 14 : Pin 14. */
+#define GPIO_DIR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIR_PIN14_Msk (0x1UL << GPIO_DIR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIR_PIN14_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN14_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 13 : Pin 13. */
+#define GPIO_DIR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIR_PIN13_Msk (0x1UL << GPIO_DIR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIR_PIN13_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN13_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 12 : Pin 12. */
+#define GPIO_DIR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIR_PIN12_Msk (0x1UL << GPIO_DIR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIR_PIN12_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN12_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 11 : Pin 11. */
+#define GPIO_DIR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIR_PIN11_Msk (0x1UL << GPIO_DIR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIR_PIN11_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN11_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 10 : Pin 10. */
+#define GPIO_DIR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIR_PIN10_Msk (0x1UL << GPIO_DIR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIR_PIN10_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN10_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 9 : Pin 9. */
+#define GPIO_DIR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIR_PIN9_Msk (0x1UL << GPIO_DIR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIR_PIN9_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN9_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 8 : Pin 8. */
+#define GPIO_DIR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIR_PIN8_Msk (0x1UL << GPIO_DIR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIR_PIN8_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN8_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 7 : Pin 7. */
+#define GPIO_DIR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIR_PIN7_Msk (0x1UL << GPIO_DIR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIR_PIN7_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN7_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 6 : Pin 6. */
+#define GPIO_DIR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIR_PIN6_Msk (0x1UL << GPIO_DIR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIR_PIN6_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN6_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 5 : Pin 5. */
+#define GPIO_DIR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIR_PIN5_Msk (0x1UL << GPIO_DIR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIR_PIN5_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN5_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 4 : Pin 4. */
+#define GPIO_DIR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIR_PIN4_Msk (0x1UL << GPIO_DIR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIR_PIN4_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN4_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 3 : Pin 3. */
+#define GPIO_DIR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIR_PIN3_Msk (0x1UL << GPIO_DIR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIR_PIN3_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN3_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 2 : Pin 2. */
+#define GPIO_DIR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIR_PIN2_Msk (0x1UL << GPIO_DIR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIR_PIN2_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN2_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 1 : Pin 1. */
+#define GPIO_DIR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIR_PIN1_Msk (0x1UL << GPIO_DIR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIR_PIN1_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN1_Output (1UL) /*!< Pin set as output. */
+
+/* Bit 0 : Pin 0. */
+#define GPIO_DIR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIR_PIN0_Msk (0x1UL << GPIO_DIR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIR_PIN0_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIR_PIN0_Output (1UL) /*!< Pin set as output. */
+
+/* Register: GPIO_DIRSET */
+/* Description: DIR set register. */
+
+/* Bit 31 : Set as output pin 31. */
+#define GPIO_DIRSET_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIRSET_PIN31_Msk (0x1UL << GPIO_DIRSET_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIRSET_PIN31_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN31_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN31_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 30 : Set as output pin 30. */
+#define GPIO_DIRSET_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIRSET_PIN30_Msk (0x1UL << GPIO_DIRSET_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIRSET_PIN30_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN30_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN30_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 29 : Set as output pin 29. */
+#define GPIO_DIRSET_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIRSET_PIN29_Msk (0x1UL << GPIO_DIRSET_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIRSET_PIN29_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN29_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN29_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 28 : Set as output pin 28. */
+#define GPIO_DIRSET_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIRSET_PIN28_Msk (0x1UL << GPIO_DIRSET_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIRSET_PIN28_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN28_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN28_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 27 : Set as output pin 27. */
+#define GPIO_DIRSET_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIRSET_PIN27_Msk (0x1UL << GPIO_DIRSET_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIRSET_PIN27_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN27_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN27_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 26 : Set as output pin 26. */
+#define GPIO_DIRSET_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIRSET_PIN26_Msk (0x1UL << GPIO_DIRSET_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIRSET_PIN26_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN26_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN26_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 25 : Set as output pin 25. */
+#define GPIO_DIRSET_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIRSET_PIN25_Msk (0x1UL << GPIO_DIRSET_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIRSET_PIN25_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN25_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN25_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 24 : Set as output pin 24. */
+#define GPIO_DIRSET_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIRSET_PIN24_Msk (0x1UL << GPIO_DIRSET_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIRSET_PIN24_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN24_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN24_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 23 : Set as output pin 23. */
+#define GPIO_DIRSET_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIRSET_PIN23_Msk (0x1UL << GPIO_DIRSET_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIRSET_PIN23_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN23_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN23_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 22 : Set as output pin 22. */
+#define GPIO_DIRSET_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIRSET_PIN22_Msk (0x1UL << GPIO_DIRSET_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIRSET_PIN22_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN22_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN22_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 21 : Set as output pin 21. */
+#define GPIO_DIRSET_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIRSET_PIN21_Msk (0x1UL << GPIO_DIRSET_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIRSET_PIN21_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN21_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN21_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 20 : Set as output pin 20. */
+#define GPIO_DIRSET_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIRSET_PIN20_Msk (0x1UL << GPIO_DIRSET_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIRSET_PIN20_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN20_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN20_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 19 : Set as output pin 19. */
+#define GPIO_DIRSET_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIRSET_PIN19_Msk (0x1UL << GPIO_DIRSET_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIRSET_PIN19_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN19_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN19_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 18 : Set as output pin 18. */
+#define GPIO_DIRSET_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIRSET_PIN18_Msk (0x1UL << GPIO_DIRSET_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIRSET_PIN18_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN18_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN18_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 17 : Set as output pin 17. */
+#define GPIO_DIRSET_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIRSET_PIN17_Msk (0x1UL << GPIO_DIRSET_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIRSET_PIN17_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN17_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN17_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 16 : Set as output pin 16. */
+#define GPIO_DIRSET_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIRSET_PIN16_Msk (0x1UL << GPIO_DIRSET_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIRSET_PIN16_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN16_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN16_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 15 : Set as output pin 15. */
+#define GPIO_DIRSET_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIRSET_PIN15_Msk (0x1UL << GPIO_DIRSET_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIRSET_PIN15_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN15_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN15_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 14 : Set as output pin 14. */
+#define GPIO_DIRSET_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIRSET_PIN14_Msk (0x1UL << GPIO_DIRSET_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIRSET_PIN14_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN14_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN14_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 13 : Set as output pin 13. */
+#define GPIO_DIRSET_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIRSET_PIN13_Msk (0x1UL << GPIO_DIRSET_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIRSET_PIN13_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN13_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN13_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 12 : Set as output pin 12. */
+#define GPIO_DIRSET_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIRSET_PIN12_Msk (0x1UL << GPIO_DIRSET_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIRSET_PIN12_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN12_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN12_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 11 : Set as output pin 11. */
+#define GPIO_DIRSET_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIRSET_PIN11_Msk (0x1UL << GPIO_DIRSET_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIRSET_PIN11_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN11_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN11_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 10 : Set as output pin 10. */
+#define GPIO_DIRSET_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIRSET_PIN10_Msk (0x1UL << GPIO_DIRSET_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIRSET_PIN10_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN10_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN10_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 9 : Set as output pin 9. */
+#define GPIO_DIRSET_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIRSET_PIN9_Msk (0x1UL << GPIO_DIRSET_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIRSET_PIN9_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN9_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN9_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 8 : Set as output pin 8. */
+#define GPIO_DIRSET_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIRSET_PIN8_Msk (0x1UL << GPIO_DIRSET_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIRSET_PIN8_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN8_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN8_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 7 : Set as output pin 7. */
+#define GPIO_DIRSET_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIRSET_PIN7_Msk (0x1UL << GPIO_DIRSET_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIRSET_PIN7_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN7_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN7_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 6 : Set as output pin 6. */
+#define GPIO_DIRSET_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIRSET_PIN6_Msk (0x1UL << GPIO_DIRSET_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIRSET_PIN6_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN6_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN6_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 5 : Set as output pin 5. */
+#define GPIO_DIRSET_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIRSET_PIN5_Msk (0x1UL << GPIO_DIRSET_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIRSET_PIN5_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN5_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN5_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 4 : Set as output pin 4. */
+#define GPIO_DIRSET_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIRSET_PIN4_Msk (0x1UL << GPIO_DIRSET_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIRSET_PIN4_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN4_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN4_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 3 : Set as output pin 3. */
+#define GPIO_DIRSET_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIRSET_PIN3_Msk (0x1UL << GPIO_DIRSET_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIRSET_PIN3_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN3_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN3_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 2 : Set as output pin 2. */
+#define GPIO_DIRSET_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIRSET_PIN2_Msk (0x1UL << GPIO_DIRSET_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIRSET_PIN2_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN2_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN2_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 1 : Set as output pin 1. */
+#define GPIO_DIRSET_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIRSET_PIN1_Msk (0x1UL << GPIO_DIRSET_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIRSET_PIN1_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN1_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN1_Set (1UL) /*!< Set pin as output. */
+
+/* Bit 0 : Set as output pin 0. */
+#define GPIO_DIRSET_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIRSET_PIN0_Msk (0x1UL << GPIO_DIRSET_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIRSET_PIN0_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRSET_PIN0_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRSET_PIN0_Set (1UL) /*!< Set pin as output. */
+
+/* Register: GPIO_DIRCLR */
+/* Description: DIR clear register. */
+
+/* Bit 31 : Set as input pin 31. */
+#define GPIO_DIRCLR_PIN31_Pos (31UL) /*!< Position of PIN31 field. */
+#define GPIO_DIRCLR_PIN31_Msk (0x1UL << GPIO_DIRCLR_PIN31_Pos) /*!< Bit mask of PIN31 field. */
+#define GPIO_DIRCLR_PIN31_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN31_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN31_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 30 : Set as input pin 30. */
+#define GPIO_DIRCLR_PIN30_Pos (30UL) /*!< Position of PIN30 field. */
+#define GPIO_DIRCLR_PIN30_Msk (0x1UL << GPIO_DIRCLR_PIN30_Pos) /*!< Bit mask of PIN30 field. */
+#define GPIO_DIRCLR_PIN30_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN30_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN30_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 29 : Set as input pin 29. */
+#define GPIO_DIRCLR_PIN29_Pos (29UL) /*!< Position of PIN29 field. */
+#define GPIO_DIRCLR_PIN29_Msk (0x1UL << GPIO_DIRCLR_PIN29_Pos) /*!< Bit mask of PIN29 field. */
+#define GPIO_DIRCLR_PIN29_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN29_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN29_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 28 : Set as input pin 28. */
+#define GPIO_DIRCLR_PIN28_Pos (28UL) /*!< Position of PIN28 field. */
+#define GPIO_DIRCLR_PIN28_Msk (0x1UL << GPIO_DIRCLR_PIN28_Pos) /*!< Bit mask of PIN28 field. */
+#define GPIO_DIRCLR_PIN28_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN28_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN28_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 27 : Set as input pin 27. */
+#define GPIO_DIRCLR_PIN27_Pos (27UL) /*!< Position of PIN27 field. */
+#define GPIO_DIRCLR_PIN27_Msk (0x1UL << GPIO_DIRCLR_PIN27_Pos) /*!< Bit mask of PIN27 field. */
+#define GPIO_DIRCLR_PIN27_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN27_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN27_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 26 : Set as input pin 26. */
+#define GPIO_DIRCLR_PIN26_Pos (26UL) /*!< Position of PIN26 field. */
+#define GPIO_DIRCLR_PIN26_Msk (0x1UL << GPIO_DIRCLR_PIN26_Pos) /*!< Bit mask of PIN26 field. */
+#define GPIO_DIRCLR_PIN26_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN26_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN26_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 25 : Set as input pin 25. */
+#define GPIO_DIRCLR_PIN25_Pos (25UL) /*!< Position of PIN25 field. */
+#define GPIO_DIRCLR_PIN25_Msk (0x1UL << GPIO_DIRCLR_PIN25_Pos) /*!< Bit mask of PIN25 field. */
+#define GPIO_DIRCLR_PIN25_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN25_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN25_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 24 : Set as input pin 24. */
+#define GPIO_DIRCLR_PIN24_Pos (24UL) /*!< Position of PIN24 field. */
+#define GPIO_DIRCLR_PIN24_Msk (0x1UL << GPIO_DIRCLR_PIN24_Pos) /*!< Bit mask of PIN24 field. */
+#define GPIO_DIRCLR_PIN24_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN24_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN24_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 23 : Set as input pin 23. */
+#define GPIO_DIRCLR_PIN23_Pos (23UL) /*!< Position of PIN23 field. */
+#define GPIO_DIRCLR_PIN23_Msk (0x1UL << GPIO_DIRCLR_PIN23_Pos) /*!< Bit mask of PIN23 field. */
+#define GPIO_DIRCLR_PIN23_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN23_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN23_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 22 : Set as input pin 22. */
+#define GPIO_DIRCLR_PIN22_Pos (22UL) /*!< Position of PIN22 field. */
+#define GPIO_DIRCLR_PIN22_Msk (0x1UL << GPIO_DIRCLR_PIN22_Pos) /*!< Bit mask of PIN22 field. */
+#define GPIO_DIRCLR_PIN22_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN22_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN22_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 21 : Set as input pin 21. */
+#define GPIO_DIRCLR_PIN21_Pos (21UL) /*!< Position of PIN21 field. */
+#define GPIO_DIRCLR_PIN21_Msk (0x1UL << GPIO_DIRCLR_PIN21_Pos) /*!< Bit mask of PIN21 field. */
+#define GPIO_DIRCLR_PIN21_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN21_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN21_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 20 : Set as input pin 20. */
+#define GPIO_DIRCLR_PIN20_Pos (20UL) /*!< Position of PIN20 field. */
+#define GPIO_DIRCLR_PIN20_Msk (0x1UL << GPIO_DIRCLR_PIN20_Pos) /*!< Bit mask of PIN20 field. */
+#define GPIO_DIRCLR_PIN20_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN20_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN20_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 19 : Set as input pin 19. */
+#define GPIO_DIRCLR_PIN19_Pos (19UL) /*!< Position of PIN19 field. */
+#define GPIO_DIRCLR_PIN19_Msk (0x1UL << GPIO_DIRCLR_PIN19_Pos) /*!< Bit mask of PIN19 field. */
+#define GPIO_DIRCLR_PIN19_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN19_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN19_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 18 : Set as input pin 18. */
+#define GPIO_DIRCLR_PIN18_Pos (18UL) /*!< Position of PIN18 field. */
+#define GPIO_DIRCLR_PIN18_Msk (0x1UL << GPIO_DIRCLR_PIN18_Pos) /*!< Bit mask of PIN18 field. */
+#define GPIO_DIRCLR_PIN18_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN18_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN18_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 17 : Set as input pin 17. */
+#define GPIO_DIRCLR_PIN17_Pos (17UL) /*!< Position of PIN17 field. */
+#define GPIO_DIRCLR_PIN17_Msk (0x1UL << GPIO_DIRCLR_PIN17_Pos) /*!< Bit mask of PIN17 field. */
+#define GPIO_DIRCLR_PIN17_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN17_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN17_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 16 : Set as input pin 16. */
+#define GPIO_DIRCLR_PIN16_Pos (16UL) /*!< Position of PIN16 field. */
+#define GPIO_DIRCLR_PIN16_Msk (0x1UL << GPIO_DIRCLR_PIN16_Pos) /*!< Bit mask of PIN16 field. */
+#define GPIO_DIRCLR_PIN16_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN16_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN16_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 15 : Set as input pin 15. */
+#define GPIO_DIRCLR_PIN15_Pos (15UL) /*!< Position of PIN15 field. */
+#define GPIO_DIRCLR_PIN15_Msk (0x1UL << GPIO_DIRCLR_PIN15_Pos) /*!< Bit mask of PIN15 field. */
+#define GPIO_DIRCLR_PIN15_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN15_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN15_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 14 : Set as input pin 14. */
+#define GPIO_DIRCLR_PIN14_Pos (14UL) /*!< Position of PIN14 field. */
+#define GPIO_DIRCLR_PIN14_Msk (0x1UL << GPIO_DIRCLR_PIN14_Pos) /*!< Bit mask of PIN14 field. */
+#define GPIO_DIRCLR_PIN14_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN14_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN14_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 13 : Set as input pin 13. */
+#define GPIO_DIRCLR_PIN13_Pos (13UL) /*!< Position of PIN13 field. */
+#define GPIO_DIRCLR_PIN13_Msk (0x1UL << GPIO_DIRCLR_PIN13_Pos) /*!< Bit mask of PIN13 field. */
+#define GPIO_DIRCLR_PIN13_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN13_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN13_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 12 : Set as input pin 12. */
+#define GPIO_DIRCLR_PIN12_Pos (12UL) /*!< Position of PIN12 field. */
+#define GPIO_DIRCLR_PIN12_Msk (0x1UL << GPIO_DIRCLR_PIN12_Pos) /*!< Bit mask of PIN12 field. */
+#define GPIO_DIRCLR_PIN12_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN12_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN12_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 11 : Set as input pin 11. */
+#define GPIO_DIRCLR_PIN11_Pos (11UL) /*!< Position of PIN11 field. */
+#define GPIO_DIRCLR_PIN11_Msk (0x1UL << GPIO_DIRCLR_PIN11_Pos) /*!< Bit mask of PIN11 field. */
+#define GPIO_DIRCLR_PIN11_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN11_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN11_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 10 : Set as input pin 10. */
+#define GPIO_DIRCLR_PIN10_Pos (10UL) /*!< Position of PIN10 field. */
+#define GPIO_DIRCLR_PIN10_Msk (0x1UL << GPIO_DIRCLR_PIN10_Pos) /*!< Bit mask of PIN10 field. */
+#define GPIO_DIRCLR_PIN10_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN10_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN10_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 9 : Set as input pin 9. */
+#define GPIO_DIRCLR_PIN9_Pos (9UL) /*!< Position of PIN9 field. */
+#define GPIO_DIRCLR_PIN9_Msk (0x1UL << GPIO_DIRCLR_PIN9_Pos) /*!< Bit mask of PIN9 field. */
+#define GPIO_DIRCLR_PIN9_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN9_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN9_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 8 : Set as input pin 8. */
+#define GPIO_DIRCLR_PIN8_Pos (8UL) /*!< Position of PIN8 field. */
+#define GPIO_DIRCLR_PIN8_Msk (0x1UL << GPIO_DIRCLR_PIN8_Pos) /*!< Bit mask of PIN8 field. */
+#define GPIO_DIRCLR_PIN8_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN8_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN8_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 7 : Set as input pin 7. */
+#define GPIO_DIRCLR_PIN7_Pos (7UL) /*!< Position of PIN7 field. */
+#define GPIO_DIRCLR_PIN7_Msk (0x1UL << GPIO_DIRCLR_PIN7_Pos) /*!< Bit mask of PIN7 field. */
+#define GPIO_DIRCLR_PIN7_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN7_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN7_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 6 : Set as input pin 6. */
+#define GPIO_DIRCLR_PIN6_Pos (6UL) /*!< Position of PIN6 field. */
+#define GPIO_DIRCLR_PIN6_Msk (0x1UL << GPIO_DIRCLR_PIN6_Pos) /*!< Bit mask of PIN6 field. */
+#define GPIO_DIRCLR_PIN6_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN6_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN6_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 5 : Set as input pin 5. */
+#define GPIO_DIRCLR_PIN5_Pos (5UL) /*!< Position of PIN5 field. */
+#define GPIO_DIRCLR_PIN5_Msk (0x1UL << GPIO_DIRCLR_PIN5_Pos) /*!< Bit mask of PIN5 field. */
+#define GPIO_DIRCLR_PIN5_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN5_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN5_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 4 : Set as input pin 4. */
+#define GPIO_DIRCLR_PIN4_Pos (4UL) /*!< Position of PIN4 field. */
+#define GPIO_DIRCLR_PIN4_Msk (0x1UL << GPIO_DIRCLR_PIN4_Pos) /*!< Bit mask of PIN4 field. */
+#define GPIO_DIRCLR_PIN4_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN4_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN4_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 3 : Set as input pin 3. */
+#define GPIO_DIRCLR_PIN3_Pos (3UL) /*!< Position of PIN3 field. */
+#define GPIO_DIRCLR_PIN3_Msk (0x1UL << GPIO_DIRCLR_PIN3_Pos) /*!< Bit mask of PIN3 field. */
+#define GPIO_DIRCLR_PIN3_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN3_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN3_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 2 : Set as input pin 2. */
+#define GPIO_DIRCLR_PIN2_Pos (2UL) /*!< Position of PIN2 field. */
+#define GPIO_DIRCLR_PIN2_Msk (0x1UL << GPIO_DIRCLR_PIN2_Pos) /*!< Bit mask of PIN2 field. */
+#define GPIO_DIRCLR_PIN2_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN2_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN2_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 1 : Set as input pin 1. */
+#define GPIO_DIRCLR_PIN1_Pos (1UL) /*!< Position of PIN1 field. */
+#define GPIO_DIRCLR_PIN1_Msk (0x1UL << GPIO_DIRCLR_PIN1_Pos) /*!< Bit mask of PIN1 field. */
+#define GPIO_DIRCLR_PIN1_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN1_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN1_Clear (1UL) /*!< Set pin as input. */
+
+/* Bit 0 : Set as input pin 0. */
+#define GPIO_DIRCLR_PIN0_Pos (0UL) /*!< Position of PIN0 field. */
+#define GPIO_DIRCLR_PIN0_Msk (0x1UL << GPIO_DIRCLR_PIN0_Pos) /*!< Bit mask of PIN0 field. */
+#define GPIO_DIRCLR_PIN0_Input (0UL) /*!< Pin set as input. */
+#define GPIO_DIRCLR_PIN0_Output (1UL) /*!< Pin set as output. */
+#define GPIO_DIRCLR_PIN0_Clear (1UL) /*!< Set pin as input. */
+
+/* Register: GPIO_PIN_CNF */
+/* Description: Configuration of GPIO pins. */
+
+/* Bits 17..16 : Pin sensing mechanism. */
+#define GPIO_PIN_CNF_SENSE_Pos (16UL) /*!< Position of SENSE field. */
+#define GPIO_PIN_CNF_SENSE_Msk (0x3UL << GPIO_PIN_CNF_SENSE_Pos) /*!< Bit mask of SENSE field. */
+#define GPIO_PIN_CNF_SENSE_Disabled (0x00UL) /*!< Disabled. */
+#define GPIO_PIN_CNF_SENSE_High (0x02UL) /*!< Wakeup on high level. */
+#define GPIO_PIN_CNF_SENSE_Low (0x03UL) /*!< Wakeup on low level. */
+
+/* Bits 10..8 : Drive configuration. */
+#define GPIO_PIN_CNF_DRIVE_Pos (8UL) /*!< Position of DRIVE field. */
+#define GPIO_PIN_CNF_DRIVE_Msk (0x7UL << GPIO_PIN_CNF_DRIVE_Pos) /*!< Bit mask of DRIVE field. */
+#define GPIO_PIN_CNF_DRIVE_S0S1 (0x00UL) /*!< Standard '0', Standard '1'. */
+#define GPIO_PIN_CNF_DRIVE_H0S1 (0x01UL) /*!< High '0', Standard '1'. */
+#define GPIO_PIN_CNF_DRIVE_S0H1 (0x02UL) /*!< Standard '0', High '1'. */
+#define GPIO_PIN_CNF_DRIVE_H0H1 (0x03UL) /*!< High '0', High '1'. */
+#define GPIO_PIN_CNF_DRIVE_D0S1 (0x04UL) /*!< Disconnected '0', Standard '1'. */
+#define GPIO_PIN_CNF_DRIVE_D0H1 (0x05UL) /*!< Disconnected '0', High '1'. */
+#define GPIO_PIN_CNF_DRIVE_S0D1 (0x06UL) /*!< Standard '0', Disconnected '1'. */
+#define GPIO_PIN_CNF_DRIVE_H0D1 (0x07UL) /*!< High '0', Disconnected '1'. */
+
+/* Bits 3..2 : Pull-up or -down configuration. */
+#define GPIO_PIN_CNF_PULL_Pos (2UL) /*!< Position of PULL field. */
+#define GPIO_PIN_CNF_PULL_Msk (0x3UL << GPIO_PIN_CNF_PULL_Pos) /*!< Bit mask of PULL field. */
+#define GPIO_PIN_CNF_PULL_Disabled (0x00UL) /*!< No pull. */
+#define GPIO_PIN_CNF_PULL_Pulldown (0x01UL) /*!< Pulldown on pin. */
+#define GPIO_PIN_CNF_PULL_Pullup (0x03UL) /*!< Pullup on pin. */
+
+/* Bit 1 : Connect or disconnect input path. */
+#define GPIO_PIN_CNF_INPUT_Pos (1UL) /*!< Position of INPUT field. */
+#define GPIO_PIN_CNF_INPUT_Msk (0x1UL << GPIO_PIN_CNF_INPUT_Pos) /*!< Bit mask of INPUT field. */
+#define GPIO_PIN_CNF_INPUT_Connect (0UL) /*!< Connect input pin. */
+#define GPIO_PIN_CNF_INPUT_Disconnect (1UL) /*!< Disconnect input pin. */
+
+/* Bit 0 : Pin direction. */
+#define GPIO_PIN_CNF_DIR_Pos (0UL) /*!< Position of DIR field. */
+#define GPIO_PIN_CNF_DIR_Msk (0x1UL << GPIO_PIN_CNF_DIR_Pos) /*!< Bit mask of DIR field. */
+#define GPIO_PIN_CNF_DIR_Input (0UL) /*!< Configure pin as an input pin. */
+#define GPIO_PIN_CNF_DIR_Output (1UL) /*!< Configure pin as an output pin. */
+
+
+/* Peripheral: GPIOTE */
+/* Description: GPIO tasks and events. */
+
+/* Register: GPIOTE_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 31 : Enable interrupt on PORT event. */
+#define GPIOTE_INTENSET_PORT_Pos (31UL) /*!< Position of PORT field. */
+#define GPIOTE_INTENSET_PORT_Msk (0x1UL << GPIOTE_INTENSET_PORT_Pos) /*!< Bit mask of PORT field. */
+#define GPIOTE_INTENSET_PORT_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_PORT_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_PORT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 3 : Enable interrupt on IN[3] event. */
+#define GPIOTE_INTENSET_IN3_Pos (3UL) /*!< Position of IN3 field. */
+#define GPIOTE_INTENSET_IN3_Msk (0x1UL << GPIOTE_INTENSET_IN3_Pos) /*!< Bit mask of IN3 field. */
+#define GPIOTE_INTENSET_IN3_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN3_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN3_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on IN[2] event. */
+#define GPIOTE_INTENSET_IN2_Pos (2UL) /*!< Position of IN2 field. */
+#define GPIOTE_INTENSET_IN2_Msk (0x1UL << GPIOTE_INTENSET_IN2_Pos) /*!< Bit mask of IN2 field. */
+#define GPIOTE_INTENSET_IN2_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN2_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN2_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on IN[1] event. */
+#define GPIOTE_INTENSET_IN1_Pos (1UL) /*!< Position of IN1 field. */
+#define GPIOTE_INTENSET_IN1_Msk (0x1UL << GPIOTE_INTENSET_IN1_Pos) /*!< Bit mask of IN1 field. */
+#define GPIOTE_INTENSET_IN1_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN1_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN1_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on IN[0] event. */
+#define GPIOTE_INTENSET_IN0_Pos (0UL) /*!< Position of IN0 field. */
+#define GPIOTE_INTENSET_IN0_Msk (0x1UL << GPIOTE_INTENSET_IN0_Pos) /*!< Bit mask of IN0 field. */
+#define GPIOTE_INTENSET_IN0_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENSET_IN0_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENSET_IN0_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: GPIOTE_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 31 : Disable interrupt on PORT event. */
+#define GPIOTE_INTENCLR_PORT_Pos (31UL) /*!< Position of PORT field. */
+#define GPIOTE_INTENCLR_PORT_Msk (0x1UL << GPIOTE_INTENCLR_PORT_Pos) /*!< Bit mask of PORT field. */
+#define GPIOTE_INTENCLR_PORT_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_PORT_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_PORT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 3 : Disable interrupt on IN[3] event. */
+#define GPIOTE_INTENCLR_IN3_Pos (3UL) /*!< Position of IN3 field. */
+#define GPIOTE_INTENCLR_IN3_Msk (0x1UL << GPIOTE_INTENCLR_IN3_Pos) /*!< Bit mask of IN3 field. */
+#define GPIOTE_INTENCLR_IN3_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN3_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN3_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on IN[2] event. */
+#define GPIOTE_INTENCLR_IN2_Pos (2UL) /*!< Position of IN2 field. */
+#define GPIOTE_INTENCLR_IN2_Msk (0x1UL << GPIOTE_INTENCLR_IN2_Pos) /*!< Bit mask of IN2 field. */
+#define GPIOTE_INTENCLR_IN2_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN2_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN2_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on IN[1] event. */
+#define GPIOTE_INTENCLR_IN1_Pos (1UL) /*!< Position of IN1 field. */
+#define GPIOTE_INTENCLR_IN1_Msk (0x1UL << GPIOTE_INTENCLR_IN1_Pos) /*!< Bit mask of IN1 field. */
+#define GPIOTE_INTENCLR_IN1_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN1_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN1_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on IN[0] event. */
+#define GPIOTE_INTENCLR_IN0_Pos (0UL) /*!< Position of IN0 field. */
+#define GPIOTE_INTENCLR_IN0_Msk (0x1UL << GPIOTE_INTENCLR_IN0_Pos) /*!< Bit mask of IN0 field. */
+#define GPIOTE_INTENCLR_IN0_Disabled (0UL) /*!< Interrupt disabled. */
+#define GPIOTE_INTENCLR_IN0_Enabled (1UL) /*!< Interrupt enabled. */
+#define GPIOTE_INTENCLR_IN0_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: GPIOTE_CONFIG */
+/* Description: Channel configuration registers. */
+
+/* Bit 20 : Initial value of the output when the GPIOTE channel is configured as a Task. */
+#define GPIOTE_CONFIG_OUTINIT_Pos (20UL) /*!< Position of OUTINIT field. */
+#define GPIOTE_CONFIG_OUTINIT_Msk (0x1UL << GPIOTE_CONFIG_OUTINIT_Pos) /*!< Bit mask of OUTINIT field. */
+#define GPIOTE_CONFIG_OUTINIT_Low (0UL) /*!< Initial low output when in task mode. */
+#define GPIOTE_CONFIG_OUTINIT_High (1UL) /*!< Initial high output when in task mode. */
+
+/* Bits 17..16 : Effects on output when in Task mode, or events on input that generates an event. */
+#define GPIOTE_CONFIG_POLARITY_Pos (16UL) /*!< Position of POLARITY field. */
+#define GPIOTE_CONFIG_POLARITY_Msk (0x3UL << GPIOTE_CONFIG_POLARITY_Pos) /*!< Bit mask of POLARITY field. */
+#define GPIOTE_CONFIG_POLARITY_LoToHi (0x01UL) /*!< Low to high. */
+#define GPIOTE_CONFIG_POLARITY_HiToLo (0x02UL) /*!< High to low. */
+#define GPIOTE_CONFIG_POLARITY_Toggle (0x03UL) /*!< Toggle. */
+
+/* Bits 12..8 : Pin select. */
+#define GPIOTE_CONFIG_PSEL_Pos (8UL) /*!< Position of PSEL field. */
+#define GPIOTE_CONFIG_PSEL_Msk (0x1FUL << GPIOTE_CONFIG_PSEL_Pos) /*!< Bit mask of PSEL field. */
+
+/* Bits 1..0 : Mode */
+#define GPIOTE_CONFIG_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define GPIOTE_CONFIG_MODE_Msk (0x3UL << GPIOTE_CONFIG_MODE_Pos) /*!< Bit mask of MODE field. */
+#define GPIOTE_CONFIG_MODE_Disabled (0x00UL) /*!< Disabled. */
+#define GPIOTE_CONFIG_MODE_Event (0x01UL) /*!< Channel configure in event mode. */
+#define GPIOTE_CONFIG_MODE_Task (0x03UL) /*!< Channel configure in task mode. */
+
+/* Register: GPIOTE_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define GPIOTE_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define GPIOTE_POWER_POWER_Msk (0x1UL << GPIOTE_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define GPIOTE_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define GPIOTE_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: LPCOMP */
+/* Description: Low power comparator. */
+
+/* Register: LPCOMP_SHORTS */
+/* Description: Shortcuts for the LPCOMP. */
+
+/* Bit 4 : Shortcut between CROSS event and STOP task. */
+#define LPCOMP_SHORTS_CROSS_STOP_Pos (4UL) /*!< Position of CROSS_STOP field. */
+#define LPCOMP_SHORTS_CROSS_STOP_Msk (0x1UL << LPCOMP_SHORTS_CROSS_STOP_Pos) /*!< Bit mask of CROSS_STOP field. */
+#define LPCOMP_SHORTS_CROSS_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_CROSS_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between UP event and STOP task. */
+#define LPCOMP_SHORTS_UP_STOP_Pos (3UL) /*!< Position of UP_STOP field. */
+#define LPCOMP_SHORTS_UP_STOP_Msk (0x1UL << LPCOMP_SHORTS_UP_STOP_Pos) /*!< Bit mask of UP_STOP field. */
+#define LPCOMP_SHORTS_UP_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_UP_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 2 : Shortcut between DOWN event and STOP task. */
+#define LPCOMP_SHORTS_DOWN_STOP_Pos (2UL) /*!< Position of DOWN_STOP field. */
+#define LPCOMP_SHORTS_DOWN_STOP_Msk (0x1UL << LPCOMP_SHORTS_DOWN_STOP_Pos) /*!< Bit mask of DOWN_STOP field. */
+#define LPCOMP_SHORTS_DOWN_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_DOWN_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 1 : Shortcut between RADY event and STOP task. */
+#define LPCOMP_SHORTS_READY_STOP_Pos (1UL) /*!< Position of READY_STOP field. */
+#define LPCOMP_SHORTS_READY_STOP_Msk (0x1UL << LPCOMP_SHORTS_READY_STOP_Pos) /*!< Bit mask of READY_STOP field. */
+#define LPCOMP_SHORTS_READY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_READY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between READY event and SAMPLE task. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Pos (0UL) /*!< Position of READY_SAMPLE field. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Msk (0x1UL << LPCOMP_SHORTS_READY_SAMPLE_Pos) /*!< Bit mask of READY_SAMPLE field. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Disabled (0UL) /*!< Shortcut disabled. */
+#define LPCOMP_SHORTS_READY_SAMPLE_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: LPCOMP_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 3 : Enable interrupt on CROSS event. */
+#define LPCOMP_INTENSET_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define LPCOMP_INTENSET_CROSS_Msk (0x1UL << LPCOMP_INTENSET_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define LPCOMP_INTENSET_CROSS_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_CROSS_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_CROSS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on UP event. */
+#define LPCOMP_INTENSET_UP_Pos (2UL) /*!< Position of UP field. */
+#define LPCOMP_INTENSET_UP_Msk (0x1UL << LPCOMP_INTENSET_UP_Pos) /*!< Bit mask of UP field. */
+#define LPCOMP_INTENSET_UP_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_UP_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_UP_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on DOWN event. */
+#define LPCOMP_INTENSET_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define LPCOMP_INTENSET_DOWN_Msk (0x1UL << LPCOMP_INTENSET_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define LPCOMP_INTENSET_DOWN_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_DOWN_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_DOWN_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on READY event. */
+#define LPCOMP_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define LPCOMP_INTENSET_READY_Msk (0x1UL << LPCOMP_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define LPCOMP_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: LPCOMP_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 3 : Disable interrupt on CROSS event. */
+#define LPCOMP_INTENCLR_CROSS_Pos (3UL) /*!< Position of CROSS field. */
+#define LPCOMP_INTENCLR_CROSS_Msk (0x1UL << LPCOMP_INTENCLR_CROSS_Pos) /*!< Bit mask of CROSS field. */
+#define LPCOMP_INTENCLR_CROSS_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_CROSS_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_CROSS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on UP event. */
+#define LPCOMP_INTENCLR_UP_Pos (2UL) /*!< Position of UP field. */
+#define LPCOMP_INTENCLR_UP_Msk (0x1UL << LPCOMP_INTENCLR_UP_Pos) /*!< Bit mask of UP field. */
+#define LPCOMP_INTENCLR_UP_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_UP_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_UP_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on DOWN event. */
+#define LPCOMP_INTENCLR_DOWN_Pos (1UL) /*!< Position of DOWN field. */
+#define LPCOMP_INTENCLR_DOWN_Msk (0x1UL << LPCOMP_INTENCLR_DOWN_Pos) /*!< Bit mask of DOWN field. */
+#define LPCOMP_INTENCLR_DOWN_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_DOWN_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_DOWN_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on READY event. */
+#define LPCOMP_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define LPCOMP_INTENCLR_READY_Msk (0x1UL << LPCOMP_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define LPCOMP_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define LPCOMP_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define LPCOMP_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: LPCOMP_RESULT */
+/* Description: Result of last compare. */
+
+/* Bit 0 : Result of last compare. Decision point SAMPLE task. */
+#define LPCOMP_RESULT_RESULT_Pos (0UL) /*!< Position of RESULT field. */
+#define LPCOMP_RESULT_RESULT_Msk (0x1UL << LPCOMP_RESULT_RESULT_Pos) /*!< Bit mask of RESULT field. */
+#define LPCOMP_RESULT_RESULT_Bellow (0UL) /*!< Input voltage is bellow the reference threshold. */
+#define LPCOMP_RESULT_RESULT_Above (1UL) /*!< Input voltage is above the reference threshold. */
+
+/* Register: LPCOMP_ENABLE */
+/* Description: Enable the LPCOMP. */
+
+/* Bits 1..0 : Enable or disable LPCOMP. */
+#define LPCOMP_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define LPCOMP_ENABLE_ENABLE_Msk (0x3UL << LPCOMP_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define LPCOMP_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled LPCOMP. */
+#define LPCOMP_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable LPCOMP. */
+
+/* Register: LPCOMP_PSEL */
+/* Description: Input pin select. */
+
+/* Bits 2..0 : Analog input pin select. */
+#define LPCOMP_PSEL_PSEL_Pos (0UL) /*!< Position of PSEL field. */
+#define LPCOMP_PSEL_PSEL_Msk (0x7UL << LPCOMP_PSEL_PSEL_Pos) /*!< Bit mask of PSEL field. */
+#define LPCOMP_PSEL_PSEL_AnalogInput0 (0UL) /*!< Use analog input 0 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput1 (1UL) /*!< Use analog input 1 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput2 (2UL) /*!< Use analog input 2 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput3 (3UL) /*!< Use analog input 3 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput4 (4UL) /*!< Use analog input 4 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput5 (5UL) /*!< Use analog input 5 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput6 (6UL) /*!< Use analog input 6 as analog input. */
+#define LPCOMP_PSEL_PSEL_AnalogInput7 (7UL) /*!< Use analog input 7 as analog input. */
+
+/* Register: LPCOMP_REFSEL */
+/* Description: Reference select. */
+
+/* Bits 2..0 : Reference select. */
+#define LPCOMP_REFSEL_REFSEL_Pos (0UL) /*!< Position of REFSEL field. */
+#define LPCOMP_REFSEL_REFSEL_Msk (0x7UL << LPCOMP_REFSEL_REFSEL_Pos) /*!< Bit mask of REFSEL field. */
+#define LPCOMP_REFSEL_REFSEL_SupplyOneEighthPrescaling (0UL) /*!< Use supply with a 1/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyTwoEighthsPrescaling (1UL) /*!< Use supply with a 2/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyThreeEighthsPrescaling (2UL) /*!< Use supply with a 3/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyFourEighthsPrescaling (3UL) /*!< Use supply with a 4/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplyFiveEighthsPrescaling (4UL) /*!< Use supply with a 5/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplySixEighthsPrescaling (5UL) /*!< Use supply with a 6/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_SupplySevenEighthsPrescaling (6UL) /*!< Use supply with a 7/8 prescaler as reference. */
+#define LPCOMP_REFSEL_REFSEL_ARef (7UL) /*!< Use external analog reference as reference. */
+
+/* Register: LPCOMP_EXTREFSEL */
+/* Description: External reference select. */
+
+/* Bit 0 : External analog reference pin selection. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_Pos (0UL) /*!< Position of EXTREFSEL field. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_Msk (0x1UL << LPCOMP_EXTREFSEL_EXTREFSEL_Pos) /*!< Bit mask of EXTREFSEL field. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference0 (0UL) /*!< Use analog reference 0 as reference. */
+#define LPCOMP_EXTREFSEL_EXTREFSEL_AnalogReference1 (1UL) /*!< Use analog reference 1 as reference. */
+
+/* Register: LPCOMP_ANADETECT */
+/* Description: Analog detect configuration. */
+
+/* Bits 1..0 : Analog detect configuration. */
+#define LPCOMP_ANADETECT_ANADETECT_Pos (0UL) /*!< Position of ANADETECT field. */
+#define LPCOMP_ANADETECT_ANADETECT_Msk (0x3UL << LPCOMP_ANADETECT_ANADETECT_Pos) /*!< Bit mask of ANADETECT field. */
+#define LPCOMP_ANADETECT_ANADETECT_Cross (0UL) /*!< Generate ANADETEC on crossing, both upwards and downwards crossing. */
+#define LPCOMP_ANADETECT_ANADETECT_Up (1UL) /*!< Generate ANADETEC on upwards crossing only. */
+#define LPCOMP_ANADETECT_ANADETECT_Down (2UL) /*!< Generate ANADETEC on downwards crossing only. */
+
+/* Register: LPCOMP_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define LPCOMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define LPCOMP_POWER_POWER_Msk (0x1UL << LPCOMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define LPCOMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define LPCOMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: MPU */
+/* Description: Memory Protection Unit. */
+
+/* Register: MPU_PERR0 */
+/* Description: Configuration of peripherals in mpu regions. */
+
+/* Bit 31 : PPI region configuration. */
+#define MPU_PERR0_PPI_Pos (31UL) /*!< Position of PPI field. */
+#define MPU_PERR0_PPI_Msk (0x1UL << MPU_PERR0_PPI_Pos) /*!< Bit mask of PPI field. */
+#define MPU_PERR0_PPI_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_PPI_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 30 : NVMC region configuration. */
+#define MPU_PERR0_NVMC_Pos (30UL) /*!< Position of NVMC field. */
+#define MPU_PERR0_NVMC_Msk (0x1UL << MPU_PERR0_NVMC_Pos) /*!< Bit mask of NVMC field. */
+#define MPU_PERR0_NVMC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_NVMC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 19 : LPCOMP region configuration. */
+#define MPU_PERR0_LPCOMP_Pos (19UL) /*!< Position of LPCOMP field. */
+#define MPU_PERR0_LPCOMP_Msk (0x1UL << MPU_PERR0_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
+#define MPU_PERR0_LPCOMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_LPCOMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 18 : QDEC region configuration. */
+#define MPU_PERR0_QDEC_Pos (18UL) /*!< Position of QDEC field. */
+#define MPU_PERR0_QDEC_Msk (0x1UL << MPU_PERR0_QDEC_Pos) /*!< Bit mask of QDEC field. */
+#define MPU_PERR0_QDEC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_QDEC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 17 : RTC1 region configuration. */
+#define MPU_PERR0_RTC1_Pos (17UL) /*!< Position of RTC1 field. */
+#define MPU_PERR0_RTC1_Msk (0x1UL << MPU_PERR0_RTC1_Pos) /*!< Bit mask of RTC1 field. */
+#define MPU_PERR0_RTC1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RTC1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 16 : WDT region configuration. */
+#define MPU_PERR0_WDT_Pos (16UL) /*!< Position of WDT field. */
+#define MPU_PERR0_WDT_Msk (0x1UL << MPU_PERR0_WDT_Pos) /*!< Bit mask of WDT field. */
+#define MPU_PERR0_WDT_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_WDT_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 15 : CCM and AAR region configuration. */
+#define MPU_PERR0_CCM_AAR_Pos (15UL) /*!< Position of CCM_AAR field. */
+#define MPU_PERR0_CCM_AAR_Msk (0x1UL << MPU_PERR0_CCM_AAR_Pos) /*!< Bit mask of CCM_AAR field. */
+#define MPU_PERR0_CCM_AAR_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_CCM_AAR_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 14 : ECB region configuration. */
+#define MPU_PERR0_ECB_Pos (14UL) /*!< Position of ECB field. */
+#define MPU_PERR0_ECB_Msk (0x1UL << MPU_PERR0_ECB_Pos) /*!< Bit mask of ECB field. */
+#define MPU_PERR0_ECB_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_ECB_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 13 : RNG region configuration. */
+#define MPU_PERR0_RNG_Pos (13UL) /*!< Position of RNG field. */
+#define MPU_PERR0_RNG_Msk (0x1UL << MPU_PERR0_RNG_Pos) /*!< Bit mask of RNG field. */
+#define MPU_PERR0_RNG_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RNG_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 12 : TEMP region configuration. */
+#define MPU_PERR0_TEMP_Pos (12UL) /*!< Position of TEMP field. */
+#define MPU_PERR0_TEMP_Msk (0x1UL << MPU_PERR0_TEMP_Pos) /*!< Bit mask of TEMP field. */
+#define MPU_PERR0_TEMP_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TEMP_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 11 : RTC0 region configuration. */
+#define MPU_PERR0_RTC0_Pos (11UL) /*!< Position of RTC0 field. */
+#define MPU_PERR0_RTC0_Msk (0x1UL << MPU_PERR0_RTC0_Pos) /*!< Bit mask of RTC0 field. */
+#define MPU_PERR0_RTC0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RTC0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 10 : TIMER2 region configuration. */
+#define MPU_PERR0_TIMER2_Pos (10UL) /*!< Position of TIMER2 field. */
+#define MPU_PERR0_TIMER2_Msk (0x1UL << MPU_PERR0_TIMER2_Pos) /*!< Bit mask of TIMER2 field. */
+#define MPU_PERR0_TIMER2_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TIMER2_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 9 : TIMER1 region configuration. */
+#define MPU_PERR0_TIMER1_Pos (9UL) /*!< Position of TIMER1 field. */
+#define MPU_PERR0_TIMER1_Msk (0x1UL << MPU_PERR0_TIMER1_Pos) /*!< Bit mask of TIMER1 field. */
+#define MPU_PERR0_TIMER1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TIMER1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 8 : TIMER0 region configuration. */
+#define MPU_PERR0_TIMER0_Pos (8UL) /*!< Position of TIMER0 field. */
+#define MPU_PERR0_TIMER0_Msk (0x1UL << MPU_PERR0_TIMER0_Pos) /*!< Bit mask of TIMER0 field. */
+#define MPU_PERR0_TIMER0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_TIMER0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 7 : ADC region configuration. */
+#define MPU_PERR0_ADC_Pos (7UL) /*!< Position of ADC field. */
+#define MPU_PERR0_ADC_Msk (0x1UL << MPU_PERR0_ADC_Pos) /*!< Bit mask of ADC field. */
+#define MPU_PERR0_ADC_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_ADC_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 6 : GPIOTE region configuration. */
+#define MPU_PERR0_GPIOTE_Pos (6UL) /*!< Position of GPIOTE field. */
+#define MPU_PERR0_GPIOTE_Msk (0x1UL << MPU_PERR0_GPIOTE_Pos) /*!< Bit mask of GPIOTE field. */
+#define MPU_PERR0_GPIOTE_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_GPIOTE_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 4 : SPI1 and TWI1 region configuration. */
+#define MPU_PERR0_SPI1_TWI1_Pos (4UL) /*!< Position of SPI1_TWI1 field. */
+#define MPU_PERR0_SPI1_TWI1_Msk (0x1UL << MPU_PERR0_SPI1_TWI1_Pos) /*!< Bit mask of SPI1_TWI1 field. */
+#define MPU_PERR0_SPI1_TWI1_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_SPI1_TWI1_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 3 : SPI0 and TWI0 region configuration. */
+#define MPU_PERR0_SPI0_TWI0_Pos (3UL) /*!< Position of SPI0_TWI0 field. */
+#define MPU_PERR0_SPI0_TWI0_Msk (0x1UL << MPU_PERR0_SPI0_TWI0_Pos) /*!< Bit mask of SPI0_TWI0 field. */
+#define MPU_PERR0_SPI0_TWI0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_SPI0_TWI0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 2 : UART0 region configuration. */
+#define MPU_PERR0_UART0_Pos (2UL) /*!< Position of UART0 field. */
+#define MPU_PERR0_UART0_Msk (0x1UL << MPU_PERR0_UART0_Pos) /*!< Bit mask of UART0 field. */
+#define MPU_PERR0_UART0_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_UART0_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 1 : RADIO region configuration. */
+#define MPU_PERR0_RADIO_Pos (1UL) /*!< Position of RADIO field. */
+#define MPU_PERR0_RADIO_Msk (0x1UL << MPU_PERR0_RADIO_Pos) /*!< Bit mask of RADIO field. */
+#define MPU_PERR0_RADIO_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_RADIO_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Bit 0 : POWER_CLOCK region configuration. */
+#define MPU_PERR0_POWER_CLOCK_Pos (0UL) /*!< Position of POWER_CLOCK field. */
+#define MPU_PERR0_POWER_CLOCK_Msk (0x1UL << MPU_PERR0_POWER_CLOCK_Pos) /*!< Bit mask of POWER_CLOCK field. */
+#define MPU_PERR0_POWER_CLOCK_InRegion1 (0UL) /*!< Peripheral configured in region 1. */
+#define MPU_PERR0_POWER_CLOCK_InRegion0 (1UL) /*!< Peripheral configured in region 0. */
+
+/* Register: MPU_PROTENSET0 */
+/* Description: Erase and write protection bit enable set register. */
+
+/* Bit 31 : Protection enable for region 31. */
+#define MPU_PROTENSET0_PROTREG31_Pos (31UL) /*!< Position of PROTREG31 field. */
+#define MPU_PROTENSET0_PROTREG31_Msk (0x1UL << MPU_PROTENSET0_PROTREG31_Pos) /*!< Bit mask of PROTREG31 field. */
+#define MPU_PROTENSET0_PROTREG31_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG31_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG31_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 30 : Protection enable for region 30. */
+#define MPU_PROTENSET0_PROTREG30_Pos (30UL) /*!< Position of PROTREG30 field. */
+#define MPU_PROTENSET0_PROTREG30_Msk (0x1UL << MPU_PROTENSET0_PROTREG30_Pos) /*!< Bit mask of PROTREG30 field. */
+#define MPU_PROTENSET0_PROTREG30_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG30_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG30_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 29 : Protection enable for region 29. */
+#define MPU_PROTENSET0_PROTREG29_Pos (29UL) /*!< Position of PROTREG29 field. */
+#define MPU_PROTENSET0_PROTREG29_Msk (0x1UL << MPU_PROTENSET0_PROTREG29_Pos) /*!< Bit mask of PROTREG29 field. */
+#define MPU_PROTENSET0_PROTREG29_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG29_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG29_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 28 : Protection enable for region 28. */
+#define MPU_PROTENSET0_PROTREG28_Pos (28UL) /*!< Position of PROTREG28 field. */
+#define MPU_PROTENSET0_PROTREG28_Msk (0x1UL << MPU_PROTENSET0_PROTREG28_Pos) /*!< Bit mask of PROTREG28 field. */
+#define MPU_PROTENSET0_PROTREG28_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG28_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG28_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 27 : Protection enable for region 27. */
+#define MPU_PROTENSET0_PROTREG27_Pos (27UL) /*!< Position of PROTREG27 field. */
+#define MPU_PROTENSET0_PROTREG27_Msk (0x1UL << MPU_PROTENSET0_PROTREG27_Pos) /*!< Bit mask of PROTREG27 field. */
+#define MPU_PROTENSET0_PROTREG27_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG27_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG27_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 26 : Protection enable for region 26. */
+#define MPU_PROTENSET0_PROTREG26_Pos (26UL) /*!< Position of PROTREG26 field. */
+#define MPU_PROTENSET0_PROTREG26_Msk (0x1UL << MPU_PROTENSET0_PROTREG26_Pos) /*!< Bit mask of PROTREG26 field. */
+#define MPU_PROTENSET0_PROTREG26_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG26_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG26_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 25 : Protection enable for region 25. */
+#define MPU_PROTENSET0_PROTREG25_Pos (25UL) /*!< Position of PROTREG25 field. */
+#define MPU_PROTENSET0_PROTREG25_Msk (0x1UL << MPU_PROTENSET0_PROTREG25_Pos) /*!< Bit mask of PROTREG25 field. */
+#define MPU_PROTENSET0_PROTREG25_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG25_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG25_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 24 : Protection enable for region 24. */
+#define MPU_PROTENSET0_PROTREG24_Pos (24UL) /*!< Position of PROTREG24 field. */
+#define MPU_PROTENSET0_PROTREG24_Msk (0x1UL << MPU_PROTENSET0_PROTREG24_Pos) /*!< Bit mask of PROTREG24 field. */
+#define MPU_PROTENSET0_PROTREG24_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG24_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG24_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 23 : Protection enable for region 23. */
+#define MPU_PROTENSET0_PROTREG23_Pos (23UL) /*!< Position of PROTREG23 field. */
+#define MPU_PROTENSET0_PROTREG23_Msk (0x1UL << MPU_PROTENSET0_PROTREG23_Pos) /*!< Bit mask of PROTREG23 field. */
+#define MPU_PROTENSET0_PROTREG23_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG23_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG23_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 22 : Protection enable for region 22. */
+#define MPU_PROTENSET0_PROTREG22_Pos (22UL) /*!< Position of PROTREG22 field. */
+#define MPU_PROTENSET0_PROTREG22_Msk (0x1UL << MPU_PROTENSET0_PROTREG22_Pos) /*!< Bit mask of PROTREG22 field. */
+#define MPU_PROTENSET0_PROTREG22_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG22_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG22_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 21 : Protection enable for region 21. */
+#define MPU_PROTENSET0_PROTREG21_Pos (21UL) /*!< Position of PROTREG21 field. */
+#define MPU_PROTENSET0_PROTREG21_Msk (0x1UL << MPU_PROTENSET0_PROTREG21_Pos) /*!< Bit mask of PROTREG21 field. */
+#define MPU_PROTENSET0_PROTREG21_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG21_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG21_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 20 : Protection enable for region 20. */
+#define MPU_PROTENSET0_PROTREG20_Pos (20UL) /*!< Position of PROTREG20 field. */
+#define MPU_PROTENSET0_PROTREG20_Msk (0x1UL << MPU_PROTENSET0_PROTREG20_Pos) /*!< Bit mask of PROTREG20 field. */
+#define MPU_PROTENSET0_PROTREG20_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG20_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG20_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 19 : Protection enable for region 19. */
+#define MPU_PROTENSET0_PROTREG19_Pos (19UL) /*!< Position of PROTREG19 field. */
+#define MPU_PROTENSET0_PROTREG19_Msk (0x1UL << MPU_PROTENSET0_PROTREG19_Pos) /*!< Bit mask of PROTREG19 field. */
+#define MPU_PROTENSET0_PROTREG19_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG19_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG19_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 18 : Protection enable for region 18. */
+#define MPU_PROTENSET0_PROTREG18_Pos (18UL) /*!< Position of PROTREG18 field. */
+#define MPU_PROTENSET0_PROTREG18_Msk (0x1UL << MPU_PROTENSET0_PROTREG18_Pos) /*!< Bit mask of PROTREG18 field. */
+#define MPU_PROTENSET0_PROTREG18_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG18_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG18_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 17 : Protection enable for region 17. */
+#define MPU_PROTENSET0_PROTREG17_Pos (17UL) /*!< Position of PROTREG17 field. */
+#define MPU_PROTENSET0_PROTREG17_Msk (0x1UL << MPU_PROTENSET0_PROTREG17_Pos) /*!< Bit mask of PROTREG17 field. */
+#define MPU_PROTENSET0_PROTREG17_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG17_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG17_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 16 : Protection enable for region 16. */
+#define MPU_PROTENSET0_PROTREG16_Pos (16UL) /*!< Position of PROTREG16 field. */
+#define MPU_PROTENSET0_PROTREG16_Msk (0x1UL << MPU_PROTENSET0_PROTREG16_Pos) /*!< Bit mask of PROTREG16 field. */
+#define MPU_PROTENSET0_PROTREG16_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG16_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG16_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 15 : Protection enable for region 15. */
+#define MPU_PROTENSET0_PROTREG15_Pos (15UL) /*!< Position of PROTREG15 field. */
+#define MPU_PROTENSET0_PROTREG15_Msk (0x1UL << MPU_PROTENSET0_PROTREG15_Pos) /*!< Bit mask of PROTREG15 field. */
+#define MPU_PROTENSET0_PROTREG15_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG15_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG15_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 14 : Protection enable for region 14. */
+#define MPU_PROTENSET0_PROTREG14_Pos (14UL) /*!< Position of PROTREG14 field. */
+#define MPU_PROTENSET0_PROTREG14_Msk (0x1UL << MPU_PROTENSET0_PROTREG14_Pos) /*!< Bit mask of PROTREG14 field. */
+#define MPU_PROTENSET0_PROTREG14_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG14_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG14_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 13 : Protection enable for region 13. */
+#define MPU_PROTENSET0_PROTREG13_Pos (13UL) /*!< Position of PROTREG13 field. */
+#define MPU_PROTENSET0_PROTREG13_Msk (0x1UL << MPU_PROTENSET0_PROTREG13_Pos) /*!< Bit mask of PROTREG13 field. */
+#define MPU_PROTENSET0_PROTREG13_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG13_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG13_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 12 : Protection enable for region 12. */
+#define MPU_PROTENSET0_PROTREG12_Pos (12UL) /*!< Position of PROTREG12 field. */
+#define MPU_PROTENSET0_PROTREG12_Msk (0x1UL << MPU_PROTENSET0_PROTREG12_Pos) /*!< Bit mask of PROTREG12 field. */
+#define MPU_PROTENSET0_PROTREG12_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG12_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG12_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 11 : Protection enable for region 11. */
+#define MPU_PROTENSET0_PROTREG11_Pos (11UL) /*!< Position of PROTREG11 field. */
+#define MPU_PROTENSET0_PROTREG11_Msk (0x1UL << MPU_PROTENSET0_PROTREG11_Pos) /*!< Bit mask of PROTREG11 field. */
+#define MPU_PROTENSET0_PROTREG11_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG11_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG11_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 10 : Protection enable for region 10. */
+#define MPU_PROTENSET0_PROTREG10_Pos (10UL) /*!< Position of PROTREG10 field. */
+#define MPU_PROTENSET0_PROTREG10_Msk (0x1UL << MPU_PROTENSET0_PROTREG10_Pos) /*!< Bit mask of PROTREG10 field. */
+#define MPU_PROTENSET0_PROTREG10_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG10_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG10_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 9 : Protection enable for region 9. */
+#define MPU_PROTENSET0_PROTREG9_Pos (9UL) /*!< Position of PROTREG9 field. */
+#define MPU_PROTENSET0_PROTREG9_Msk (0x1UL << MPU_PROTENSET0_PROTREG9_Pos) /*!< Bit mask of PROTREG9 field. */
+#define MPU_PROTENSET0_PROTREG9_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG9_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG9_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 8 : Protection enable for region 8. */
+#define MPU_PROTENSET0_PROTREG8_Pos (8UL) /*!< Position of PROTREG8 field. */
+#define MPU_PROTENSET0_PROTREG8_Msk (0x1UL << MPU_PROTENSET0_PROTREG8_Pos) /*!< Bit mask of PROTREG8 field. */
+#define MPU_PROTENSET0_PROTREG8_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG8_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG8_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 7 : Protection enable for region 7. */
+#define MPU_PROTENSET0_PROTREG7_Pos (7UL) /*!< Position of PROTREG7 field. */
+#define MPU_PROTENSET0_PROTREG7_Msk (0x1UL << MPU_PROTENSET0_PROTREG7_Pos) /*!< Bit mask of PROTREG7 field. */
+#define MPU_PROTENSET0_PROTREG7_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG7_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG7_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 6 : Protection enable for region 6. */
+#define MPU_PROTENSET0_PROTREG6_Pos (6UL) /*!< Position of PROTREG6 field. */
+#define MPU_PROTENSET0_PROTREG6_Msk (0x1UL << MPU_PROTENSET0_PROTREG6_Pos) /*!< Bit mask of PROTREG6 field. */
+#define MPU_PROTENSET0_PROTREG6_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG6_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG6_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 5 : Protection enable for region 5. */
+#define MPU_PROTENSET0_PROTREG5_Pos (5UL) /*!< Position of PROTREG5 field. */
+#define MPU_PROTENSET0_PROTREG5_Msk (0x1UL << MPU_PROTENSET0_PROTREG5_Pos) /*!< Bit mask of PROTREG5 field. */
+#define MPU_PROTENSET0_PROTREG5_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG5_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG5_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 4 : Protection enable for region 4. */
+#define MPU_PROTENSET0_PROTREG4_Pos (4UL) /*!< Position of PROTREG4 field. */
+#define MPU_PROTENSET0_PROTREG4_Msk (0x1UL << MPU_PROTENSET0_PROTREG4_Pos) /*!< Bit mask of PROTREG4 field. */
+#define MPU_PROTENSET0_PROTREG4_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG4_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG4_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 3 : Protection enable for region 3. */
+#define MPU_PROTENSET0_PROTREG3_Pos (3UL) /*!< Position of PROTREG3 field. */
+#define MPU_PROTENSET0_PROTREG3_Msk (0x1UL << MPU_PROTENSET0_PROTREG3_Pos) /*!< Bit mask of PROTREG3 field. */
+#define MPU_PROTENSET0_PROTREG3_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG3_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG3_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 2 : Protection enable for region 2. */
+#define MPU_PROTENSET0_PROTREG2_Pos (2UL) /*!< Position of PROTREG2 field. */
+#define MPU_PROTENSET0_PROTREG2_Msk (0x1UL << MPU_PROTENSET0_PROTREG2_Pos) /*!< Bit mask of PROTREG2 field. */
+#define MPU_PROTENSET0_PROTREG2_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG2_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG2_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 1 : Protection enable for region 1. */
+#define MPU_PROTENSET0_PROTREG1_Pos (1UL) /*!< Position of PROTREG1 field. */
+#define MPU_PROTENSET0_PROTREG1_Msk (0x1UL << MPU_PROTENSET0_PROTREG1_Pos) /*!< Bit mask of PROTREG1 field. */
+#define MPU_PROTENSET0_PROTREG1_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG1_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG1_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 0 : Protection enable for region 0. */
+#define MPU_PROTENSET0_PROTREG0_Pos (0UL) /*!< Position of PROTREG0 field. */
+#define MPU_PROTENSET0_PROTREG0_Msk (0x1UL << MPU_PROTENSET0_PROTREG0_Pos) /*!< Bit mask of PROTREG0 field. */
+#define MPU_PROTENSET0_PROTREG0_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET0_PROTREG0_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET0_PROTREG0_Set (1UL) /*!< Enable protection on write. */
+
+/* Register: MPU_PROTENSET1 */
+/* Description: Erase and write protection bit enable set register. */
+
+/* Bit 31 : Protection enable for region 63. */
+#define MPU_PROTENSET1_PROTREG63_Pos (31UL) /*!< Position of PROTREG63 field. */
+#define MPU_PROTENSET1_PROTREG63_Msk (0x1UL << MPU_PROTENSET1_PROTREG63_Pos) /*!< Bit mask of PROTREG63 field. */
+#define MPU_PROTENSET1_PROTREG63_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG63_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG63_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 30 : Protection enable for region 62. */
+#define MPU_PROTENSET1_PROTREG62_Pos (30UL) /*!< Position of PROTREG62 field. */
+#define MPU_PROTENSET1_PROTREG62_Msk (0x1UL << MPU_PROTENSET1_PROTREG62_Pos) /*!< Bit mask of PROTREG62 field. */
+#define MPU_PROTENSET1_PROTREG62_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG62_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG62_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 29 : Protection enable for region 61. */
+#define MPU_PROTENSET1_PROTREG61_Pos (29UL) /*!< Position of PROTREG61 field. */
+#define MPU_PROTENSET1_PROTREG61_Msk (0x1UL << MPU_PROTENSET1_PROTREG61_Pos) /*!< Bit mask of PROTREG61 field. */
+#define MPU_PROTENSET1_PROTREG61_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG61_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG61_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 28 : Protection enable for region 60. */
+#define MPU_PROTENSET1_PROTREG60_Pos (28UL) /*!< Position of PROTREG60 field. */
+#define MPU_PROTENSET1_PROTREG60_Msk (0x1UL << MPU_PROTENSET1_PROTREG60_Pos) /*!< Bit mask of PROTREG60 field. */
+#define MPU_PROTENSET1_PROTREG60_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG60_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG60_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 27 : Protection enable for region 59. */
+#define MPU_PROTENSET1_PROTREG59_Pos (27UL) /*!< Position of PROTREG59 field. */
+#define MPU_PROTENSET1_PROTREG59_Msk (0x1UL << MPU_PROTENSET1_PROTREG59_Pos) /*!< Bit mask of PROTREG59 field. */
+#define MPU_PROTENSET1_PROTREG59_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG59_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG59_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 26 : Protection enable for region 58. */
+#define MPU_PROTENSET1_PROTREG58_Pos (26UL) /*!< Position of PROTREG58 field. */
+#define MPU_PROTENSET1_PROTREG58_Msk (0x1UL << MPU_PROTENSET1_PROTREG58_Pos) /*!< Bit mask of PROTREG58 field. */
+#define MPU_PROTENSET1_PROTREG58_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG58_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG58_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 25 : Protection enable for region 57. */
+#define MPU_PROTENSET1_PROTREG57_Pos (25UL) /*!< Position of PROTREG57 field. */
+#define MPU_PROTENSET1_PROTREG57_Msk (0x1UL << MPU_PROTENSET1_PROTREG57_Pos) /*!< Bit mask of PROTREG57 field. */
+#define MPU_PROTENSET1_PROTREG57_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG57_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG57_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 24 : Protection enable for region 56. */
+#define MPU_PROTENSET1_PROTREG56_Pos (24UL) /*!< Position of PROTREG56 field. */
+#define MPU_PROTENSET1_PROTREG56_Msk (0x1UL << MPU_PROTENSET1_PROTREG56_Pos) /*!< Bit mask of PROTREG56 field. */
+#define MPU_PROTENSET1_PROTREG56_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG56_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG56_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 23 : Protection enable for region 55. */
+#define MPU_PROTENSET1_PROTREG55_Pos (23UL) /*!< Position of PROTREG55 field. */
+#define MPU_PROTENSET1_PROTREG55_Msk (0x1UL << MPU_PROTENSET1_PROTREG55_Pos) /*!< Bit mask of PROTREG55 field. */
+#define MPU_PROTENSET1_PROTREG55_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG55_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG55_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 22 : Protection enable for region 54. */
+#define MPU_PROTENSET1_PROTREG54_Pos (22UL) /*!< Position of PROTREG54 field. */
+#define MPU_PROTENSET1_PROTREG54_Msk (0x1UL << MPU_PROTENSET1_PROTREG54_Pos) /*!< Bit mask of PROTREG54 field. */
+#define MPU_PROTENSET1_PROTREG54_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG54_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG54_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 21 : Protection enable for region 53. */
+#define MPU_PROTENSET1_PROTREG53_Pos (21UL) /*!< Position of PROTREG53 field. */
+#define MPU_PROTENSET1_PROTREG53_Msk (0x1UL << MPU_PROTENSET1_PROTREG53_Pos) /*!< Bit mask of PROTREG53 field. */
+#define MPU_PROTENSET1_PROTREG53_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG53_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG53_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 20 : Protection enable for region 52. */
+#define MPU_PROTENSET1_PROTREG52_Pos (20UL) /*!< Position of PROTREG52 field. */
+#define MPU_PROTENSET1_PROTREG52_Msk (0x1UL << MPU_PROTENSET1_PROTREG52_Pos) /*!< Bit mask of PROTREG52 field. */
+#define MPU_PROTENSET1_PROTREG52_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG52_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG52_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 19 : Protection enable for region 51. */
+#define MPU_PROTENSET1_PROTREG51_Pos (19UL) /*!< Position of PROTREG51 field. */
+#define MPU_PROTENSET1_PROTREG51_Msk (0x1UL << MPU_PROTENSET1_PROTREG51_Pos) /*!< Bit mask of PROTREG51 field. */
+#define MPU_PROTENSET1_PROTREG51_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG51_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG51_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 18 : Protection enable for region 50. */
+#define MPU_PROTENSET1_PROTREG50_Pos (18UL) /*!< Position of PROTREG50 field. */
+#define MPU_PROTENSET1_PROTREG50_Msk (0x1UL << MPU_PROTENSET1_PROTREG50_Pos) /*!< Bit mask of PROTREG50 field. */
+#define MPU_PROTENSET1_PROTREG50_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG50_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG50_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 17 : Protection enable for region 49. */
+#define MPU_PROTENSET1_PROTREG49_Pos (17UL) /*!< Position of PROTREG49 field. */
+#define MPU_PROTENSET1_PROTREG49_Msk (0x1UL << MPU_PROTENSET1_PROTREG49_Pos) /*!< Bit mask of PROTREG49 field. */
+#define MPU_PROTENSET1_PROTREG49_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG49_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG49_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 16 : Protection enable for region 48. */
+#define MPU_PROTENSET1_PROTREG48_Pos (16UL) /*!< Position of PROTREG48 field. */
+#define MPU_PROTENSET1_PROTREG48_Msk (0x1UL << MPU_PROTENSET1_PROTREG48_Pos) /*!< Bit mask of PROTREG48 field. */
+#define MPU_PROTENSET1_PROTREG48_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG48_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG48_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 15 : Protection enable for region 47. */
+#define MPU_PROTENSET1_PROTREG47_Pos (15UL) /*!< Position of PROTREG47 field. */
+#define MPU_PROTENSET1_PROTREG47_Msk (0x1UL << MPU_PROTENSET1_PROTREG47_Pos) /*!< Bit mask of PROTREG47 field. */
+#define MPU_PROTENSET1_PROTREG47_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG47_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG47_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 14 : Protection enable for region 46. */
+#define MPU_PROTENSET1_PROTREG46_Pos (14UL) /*!< Position of PROTREG46 field. */
+#define MPU_PROTENSET1_PROTREG46_Msk (0x1UL << MPU_PROTENSET1_PROTREG46_Pos) /*!< Bit mask of PROTREG46 field. */
+#define MPU_PROTENSET1_PROTREG46_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG46_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG46_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 13 : Protection enable for region 45. */
+#define MPU_PROTENSET1_PROTREG45_Pos (13UL) /*!< Position of PROTREG45 field. */
+#define MPU_PROTENSET1_PROTREG45_Msk (0x1UL << MPU_PROTENSET1_PROTREG45_Pos) /*!< Bit mask of PROTREG45 field. */
+#define MPU_PROTENSET1_PROTREG45_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG45_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG45_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 12 : Protection enable for region 44. */
+#define MPU_PROTENSET1_PROTREG44_Pos (12UL) /*!< Position of PROTREG44 field. */
+#define MPU_PROTENSET1_PROTREG44_Msk (0x1UL << MPU_PROTENSET1_PROTREG44_Pos) /*!< Bit mask of PROTREG44 field. */
+#define MPU_PROTENSET1_PROTREG44_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG44_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG44_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 11 : Protection enable for region 43. */
+#define MPU_PROTENSET1_PROTREG43_Pos (11UL) /*!< Position of PROTREG43 field. */
+#define MPU_PROTENSET1_PROTREG43_Msk (0x1UL << MPU_PROTENSET1_PROTREG43_Pos) /*!< Bit mask of PROTREG43 field. */
+#define MPU_PROTENSET1_PROTREG43_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG43_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG43_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 10 : Protection enable for region 42. */
+#define MPU_PROTENSET1_PROTREG42_Pos (10UL) /*!< Position of PROTREG42 field. */
+#define MPU_PROTENSET1_PROTREG42_Msk (0x1UL << MPU_PROTENSET1_PROTREG42_Pos) /*!< Bit mask of PROTREG42 field. */
+#define MPU_PROTENSET1_PROTREG42_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG42_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG42_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 9 : Protection enable for region 41. */
+#define MPU_PROTENSET1_PROTREG41_Pos (9UL) /*!< Position of PROTREG41 field. */
+#define MPU_PROTENSET1_PROTREG41_Msk (0x1UL << MPU_PROTENSET1_PROTREG41_Pos) /*!< Bit mask of PROTREG41 field. */
+#define MPU_PROTENSET1_PROTREG41_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG41_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG41_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 8 : Protection enable for region 40. */
+#define MPU_PROTENSET1_PROTREG40_Pos (8UL) /*!< Position of PROTREG40 field. */
+#define MPU_PROTENSET1_PROTREG40_Msk (0x1UL << MPU_PROTENSET1_PROTREG40_Pos) /*!< Bit mask of PROTREG40 field. */
+#define MPU_PROTENSET1_PROTREG40_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG40_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG40_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 7 : Protection enable for region 39. */
+#define MPU_PROTENSET1_PROTREG39_Pos (7UL) /*!< Position of PROTREG39 field. */
+#define MPU_PROTENSET1_PROTREG39_Msk (0x1UL << MPU_PROTENSET1_PROTREG39_Pos) /*!< Bit mask of PROTREG39 field. */
+#define MPU_PROTENSET1_PROTREG39_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG39_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG39_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 6 : Protection enable for region 38. */
+#define MPU_PROTENSET1_PROTREG38_Pos (6UL) /*!< Position of PROTREG38 field. */
+#define MPU_PROTENSET1_PROTREG38_Msk (0x1UL << MPU_PROTENSET1_PROTREG38_Pos) /*!< Bit mask of PROTREG38 field. */
+#define MPU_PROTENSET1_PROTREG38_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG38_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG38_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 5 : Protection enable for region 37. */
+#define MPU_PROTENSET1_PROTREG37_Pos (5UL) /*!< Position of PROTREG37 field. */
+#define MPU_PROTENSET1_PROTREG37_Msk (0x1UL << MPU_PROTENSET1_PROTREG37_Pos) /*!< Bit mask of PROTREG37 field. */
+#define MPU_PROTENSET1_PROTREG37_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG37_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG37_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 4 : Protection enable for region 36. */
+#define MPU_PROTENSET1_PROTREG36_Pos (4UL) /*!< Position of PROTREG36 field. */
+#define MPU_PROTENSET1_PROTREG36_Msk (0x1UL << MPU_PROTENSET1_PROTREG36_Pos) /*!< Bit mask of PROTREG36 field. */
+#define MPU_PROTENSET1_PROTREG36_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG36_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG36_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 3 : Protection enable for region 35. */
+#define MPU_PROTENSET1_PROTREG35_Pos (3UL) /*!< Position of PROTREG35 field. */
+#define MPU_PROTENSET1_PROTREG35_Msk (0x1UL << MPU_PROTENSET1_PROTREG35_Pos) /*!< Bit mask of PROTREG35 field. */
+#define MPU_PROTENSET1_PROTREG35_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG35_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG35_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 2 : Protection enable for region 34. */
+#define MPU_PROTENSET1_PROTREG34_Pos (2UL) /*!< Position of PROTREG34 field. */
+#define MPU_PROTENSET1_PROTREG34_Msk (0x1UL << MPU_PROTENSET1_PROTREG34_Pos) /*!< Bit mask of PROTREG34 field. */
+#define MPU_PROTENSET1_PROTREG34_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG34_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG34_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 1 : Protection enable for region 33. */
+#define MPU_PROTENSET1_PROTREG33_Pos (1UL) /*!< Position of PROTREG33 field. */
+#define MPU_PROTENSET1_PROTREG33_Msk (0x1UL << MPU_PROTENSET1_PROTREG33_Pos) /*!< Bit mask of PROTREG33 field. */
+#define MPU_PROTENSET1_PROTREG33_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG33_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG33_Set (1UL) /*!< Enable protection on write. */
+
+/* Bit 0 : Protection enable for region 32. */
+#define MPU_PROTENSET1_PROTREG32_Pos (0UL) /*!< Position of PROTREG32 field. */
+#define MPU_PROTENSET1_PROTREG32_Msk (0x1UL << MPU_PROTENSET1_PROTREG32_Pos) /*!< Bit mask of PROTREG32 field. */
+#define MPU_PROTENSET1_PROTREG32_Disabled (0UL) /*!< Protection disabled. */
+#define MPU_PROTENSET1_PROTREG32_Enabled (1UL) /*!< Protection enabled. */
+#define MPU_PROTENSET1_PROTREG32_Set (1UL) /*!< Enable protection on write. */
+
+/* Register: MPU_DISABLEINDEBUG */
+/* Description: Disable erase and write protection mechanism in debug mode. */
+
+/* Bit 0 : Disable protection mechanism in debug mode. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos (0UL) /*!< Position of DISABLEINDEBUG field. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Msk (0x1UL << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos) /*!< Bit mask of DISABLEINDEBUG field. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Enabled (0UL) /*!< Protection enabled. */
+#define MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled (1UL) /*!< Protection disabled. */
+
+/* Register: MPU_PROTBLOCKSIZE */
+/* Description: Erase and write protection block size. */
+
+/* Bits 1..0 : Erase and write protection block size. */
+#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos (0UL) /*!< Position of PROTBLOCKSIZE field. */
+#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Msk (0x3UL << MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_Pos) /*!< Bit mask of PROTBLOCKSIZE field. */
+#define MPU_PROTBLOCKSIZE_PROTBLOCKSIZE_4k (0UL) /*!< Erase and write protection block size is 4k. */
+
+/* Register: MPU_ENRBDREG */
+/* Description: Enable or disable RBD. */
+
+/* Bit 0 : Enable or disable RBD. */
+#define MPU_ENRBDREG_ENRBDREG_Pos (0UL) /*!< Position of ENRBDREG field. */
+#define MPU_ENRBDREG_ENRBDREG_Msk (0x1UL << MPU_ENRBDREG_ENRBDREG_Pos) /*!< Bit mask of ENRBDREG field. */
+#define MPU_ENRBDREG_ENRBDREG_Disabled (0UL) /*!< RBD disabled. */
+#define MPU_ENRBDREG_ENRBDREG_Enabled (1UL) /*!< RBD enabled. */
+
+
+/* Peripheral: NVMC */
+/* Description: Non Volatile Memory Controller. */
+
+/* Register: NVMC_READY */
+/* Description: Ready flag. */
+
+/* Bit 0 : NVMC ready. */
+#define NVMC_READY_READY_Pos (0UL) /*!< Position of READY field. */
+#define NVMC_READY_READY_Msk (0x1UL << NVMC_READY_READY_Pos) /*!< Bit mask of READY field. */
+#define NVMC_READY_READY_Busy (0UL) /*!< NVMC is busy (on-going write or erase operation). */
+#define NVMC_READY_READY_Ready (1UL) /*!< NVMC is ready. */
+
+/* Register: NVMC_CONFIG */
+/* Description: Configuration register. */
+
+/* Bits 1..0 : Program write enable. */
+#define NVMC_CONFIG_WEN_Pos (0UL) /*!< Position of WEN field. */
+#define NVMC_CONFIG_WEN_Msk (0x3UL << NVMC_CONFIG_WEN_Pos) /*!< Bit mask of WEN field. */
+#define NVMC_CONFIG_WEN_Ren (0x00UL) /*!< Read only access. */
+#define NVMC_CONFIG_WEN_Wen (0x01UL) /*!< Write enabled. */
+#define NVMC_CONFIG_WEN_Een (0x02UL) /*!< Erase enabled. */
+
+/* Register: NVMC_ERASEALL */
+/* Description: Register for erasing all non-volatile user memory. */
+
+/* Bit 0 : Starts the erasing of all user NVM (code region 0/1 and UICR registers). */
+#define NVMC_ERASEALL_ERASEALL_Pos (0UL) /*!< Position of ERASEALL field. */
+#define NVMC_ERASEALL_ERASEALL_Msk (0x1UL << NVMC_ERASEALL_ERASEALL_Pos) /*!< Bit mask of ERASEALL field. */
+#define NVMC_ERASEALL_ERASEALL_NoOperation (0UL) /*!< No operation. */
+#define NVMC_ERASEALL_ERASEALL_Erase (1UL) /*!< Start chip erase. */
+
+/* Register: NVMC_ERASEUICR */
+/* Description: Register for start erasing User Information Congfiguration Registers. */
+
+/* Bit 0 : It can only be used when all contents of code region 1 are erased. */
+#define NVMC_ERASEUICR_ERASEUICR_Pos (0UL) /*!< Position of ERASEUICR field. */
+#define NVMC_ERASEUICR_ERASEUICR_Msk (0x1UL << NVMC_ERASEUICR_ERASEUICR_Pos) /*!< Bit mask of ERASEUICR field. */
+#define NVMC_ERASEUICR_ERASEUICR_NoOperation (0UL) /*!< No operation. */
+#define NVMC_ERASEUICR_ERASEUICR_Erase (1UL) /*!< Start UICR erase. */
+
+
+/* Peripheral: POWER */
+/* Description: Power Control. */
+
+/* Register: POWER_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on POFWARN event. */
+#define POWER_INTENSET_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
+#define POWER_INTENSET_POFWARN_Msk (0x1UL << POWER_INTENSET_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
+#define POWER_INTENSET_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */
+#define POWER_INTENSET_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */
+#define POWER_INTENSET_POFWARN_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: POWER_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on POFWARN event. */
+#define POWER_INTENCLR_POFWARN_Pos (2UL) /*!< Position of POFWARN field. */
+#define POWER_INTENCLR_POFWARN_Msk (0x1UL << POWER_INTENCLR_POFWARN_Pos) /*!< Bit mask of POFWARN field. */
+#define POWER_INTENCLR_POFWARN_Disabled (0UL) /*!< Interrupt disabled. */
+#define POWER_INTENCLR_POFWARN_Enabled (1UL) /*!< Interrupt enabled. */
+#define POWER_INTENCLR_POFWARN_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: POWER_RESETREAS */
+/* Description: Reset reason. */
+
+/* Bit 18 : Reset from wake-up from OFF mode detected by entering into debug interface mode. */
+#define POWER_RESETREAS_DIF_Pos (18UL) /*!< Position of DIF field. */
+#define POWER_RESETREAS_DIF_Msk (0x1UL << POWER_RESETREAS_DIF_Pos) /*!< Bit mask of DIF field. */
+
+/* Bit 17 : Reset from wake-up from OFF mode detected by the use of ANADETECT signal from LPCOMP. */
+#define POWER_RESETREAS_LPCOMP_Pos (17UL) /*!< Position of LPCOMP field. */
+#define POWER_RESETREAS_LPCOMP_Msk (0x1UL << POWER_RESETREAS_LPCOMP_Pos) /*!< Bit mask of LPCOMP field. */
+
+/* Bit 16 : Reset from wake-up from OFF mode detected by the use of DETECT signal from GPIO. */
+#define POWER_RESETREAS_OFF_Pos (16UL) /*!< Position of OFF field. */
+#define POWER_RESETREAS_OFF_Msk (0x1UL << POWER_RESETREAS_OFF_Pos) /*!< Bit mask of OFF field. */
+
+/* Bit 3 : Reset from CPU lock-up detected. */
+#define POWER_RESETREAS_LOCKUP_Pos (3UL) /*!< Position of LOCKUP field. */
+#define POWER_RESETREAS_LOCKUP_Msk (0x1UL << POWER_RESETREAS_LOCKUP_Pos) /*!< Bit mask of LOCKUP field. */
+
+/* Bit 2 : Reset from AIRCR.SYSRESETREQ detected. */
+#define POWER_RESETREAS_SREQ_Pos (2UL) /*!< Position of SREQ field. */
+#define POWER_RESETREAS_SREQ_Msk (0x1UL << POWER_RESETREAS_SREQ_Pos) /*!< Bit mask of SREQ field. */
+
+/* Bit 1 : Reset from watchdog detected. */
+#define POWER_RESETREAS_DOG_Pos (1UL) /*!< Position of DOG field. */
+#define POWER_RESETREAS_DOG_Msk (0x1UL << POWER_RESETREAS_DOG_Pos) /*!< Bit mask of DOG field. */
+
+/* Bit 0 : Reset from pin-reset detected. */
+#define POWER_RESETREAS_RESETPIN_Pos (0UL) /*!< Position of RESETPIN field. */
+#define POWER_RESETREAS_RESETPIN_Msk (0x1UL << POWER_RESETREAS_RESETPIN_Pos) /*!< Bit mask of RESETPIN field. */
+
+/* Register: POWER_RAMSTATUS */
+/* Description: Ram status register. */
+
+/* Bit 3 : RAM block 3 status. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Pos (3UL) /*!< Position of RAMBLOCK3 field. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK3_Pos) /*!< Bit mask of RAMBLOCK3 field. */
+#define POWER_RAMSTATUS_RAMBLOCK3_Off (0UL) /*!< RAM block 3 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK3_On (1UL) /*!< RAM block 3 is on. */
+
+/* Bit 2 : RAM block 2 status. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Pos (2UL) /*!< Position of RAMBLOCK2 field. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK2_Pos) /*!< Bit mask of RAMBLOCK2 field. */
+#define POWER_RAMSTATUS_RAMBLOCK2_Off (0UL) /*!< RAM block 2 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK2_On (1UL) /*!< RAM block 2 is on. */
+
+/* Bit 1 : RAM block 1 status. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Pos (1UL) /*!< Position of RAMBLOCK1 field. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK1_Pos) /*!< Bit mask of RAMBLOCK1 field. */
+#define POWER_RAMSTATUS_RAMBLOCK1_Off (0UL) /*!< RAM block 1 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK1_On (1UL) /*!< RAM block 1 is on. */
+
+/* Bit 0 : RAM block 0 status. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Pos (0UL) /*!< Position of RAMBLOCK0 field. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Msk (0x1UL << POWER_RAMSTATUS_RAMBLOCK0_Pos) /*!< Bit mask of RAMBLOCK0 field. */
+#define POWER_RAMSTATUS_RAMBLOCK0_Off (0UL) /*!< RAM block 0 is off or powering up. */
+#define POWER_RAMSTATUS_RAMBLOCK0_On (1UL) /*!< RAM block 0 is on. */
+
+/* Register: POWER_SYSTEMOFF */
+/* Description: System off register. */
+
+/* Bit 0 : Enter system off mode. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Pos (0UL) /*!< Position of SYSTEMOFF field. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Msk (0x1UL << POWER_SYSTEMOFF_SYSTEMOFF_Pos) /*!< Bit mask of SYSTEMOFF field. */
+#define POWER_SYSTEMOFF_SYSTEMOFF_Enter (1UL) /*!< Enter system off mode. */
+
+/* Register: POWER_POFCON */
+/* Description: Power failure configuration. */
+
+/* Bits 2..1 : Set threshold level. */
+#define POWER_POFCON_THRESHOLD_Pos (1UL) /*!< Position of THRESHOLD field. */
+#define POWER_POFCON_THRESHOLD_Msk (0x3UL << POWER_POFCON_THRESHOLD_Pos) /*!< Bit mask of THRESHOLD field. */
+#define POWER_POFCON_THRESHOLD_V21 (0x00UL) /*!< Set threshold to 2.1Volts. */
+#define POWER_POFCON_THRESHOLD_V23 (0x01UL) /*!< Set threshold to 2.3Volts. */
+#define POWER_POFCON_THRESHOLD_V25 (0x02UL) /*!< Set threshold to 2.5Volts. */
+#define POWER_POFCON_THRESHOLD_V27 (0x03UL) /*!< Set threshold to 2.7Volts. */
+
+/* Bit 0 : Power failure comparator enable. */
+#define POWER_POFCON_POF_Pos (0UL) /*!< Position of POF field. */
+#define POWER_POFCON_POF_Msk (0x1UL << POWER_POFCON_POF_Pos) /*!< Bit mask of POF field. */
+#define POWER_POFCON_POF_Disabled (0UL) /*!< Disabled. */
+#define POWER_POFCON_POF_Enabled (1UL) /*!< Enabled. */
+
+/* Register: POWER_GPREGRET */
+/* Description: General purpose retention register. This register is a retained register. */
+
+/* Bits 7..0 : General purpose retention register. */
+#define POWER_GPREGRET_GPREGRET_Pos (0UL) /*!< Position of GPREGRET field. */
+#define POWER_GPREGRET_GPREGRET_Msk (0xFFUL << POWER_GPREGRET_GPREGRET_Pos) /*!< Bit mask of GPREGRET field. */
+
+/* Register: POWER_RAMON */
+/* Description: Ram on/off. */
+
+/* Bit 17 : RAM block 1 behaviour in OFF mode. */
+#define POWER_RAMON_OFFRAM1_Pos (17UL) /*!< Position of OFFRAM1 field. */
+#define POWER_RAMON_OFFRAM1_Msk (0x1UL << POWER_RAMON_OFFRAM1_Pos) /*!< Bit mask of OFFRAM1 field. */
+#define POWER_RAMON_OFFRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in OFF mode. */
+#define POWER_RAMON_OFFRAM1_RAM1On (1UL) /*!< RAM block 1 ON in OFF mode. */
+
+/* Bit 16 : RAM block 0 behaviour in OFF mode. */
+#define POWER_RAMON_OFFRAM0_Pos (16UL) /*!< Position of OFFRAM0 field. */
+#define POWER_RAMON_OFFRAM0_Msk (0x1UL << POWER_RAMON_OFFRAM0_Pos) /*!< Bit mask of OFFRAM0 field. */
+#define POWER_RAMON_OFFRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in OFF mode. */
+#define POWER_RAMON_OFFRAM0_RAM0On (1UL) /*!< RAM block 0 ON in OFF mode. */
+
+/* Bit 1 : RAM block 1 behaviour in ON mode. */
+#define POWER_RAMON_ONRAM1_Pos (1UL) /*!< Position of ONRAM1 field. */
+#define POWER_RAMON_ONRAM1_Msk (0x1UL << POWER_RAMON_ONRAM1_Pos) /*!< Bit mask of ONRAM1 field. */
+#define POWER_RAMON_ONRAM1_RAM1Off (0UL) /*!< RAM block 1 OFF in ON mode. */
+#define POWER_RAMON_ONRAM1_RAM1On (1UL) /*!< RAM block 1 ON in ON mode. */
+
+/* Bit 0 : RAM block 0 behaviour in ON mode. */
+#define POWER_RAMON_ONRAM0_Pos (0UL) /*!< Position of ONRAM0 field. */
+#define POWER_RAMON_ONRAM0_Msk (0x1UL << POWER_RAMON_ONRAM0_Pos) /*!< Bit mask of ONRAM0 field. */
+#define POWER_RAMON_ONRAM0_RAM0Off (0UL) /*!< RAM block 0 OFF in ON mode. */
+#define POWER_RAMON_ONRAM0_RAM0On (1UL) /*!< RAM block 0 ON in ON mode. */
+
+/* Register: POWER_RESET */
+/* Description: Pin reset functionality configuration register. This register is a retained register. */
+
+/* Bit 0 : Enable or disable pin reset in debug interface mode. */
+#define POWER_RESET_RESET_Pos (0UL) /*!< Position of RESET field. */
+#define POWER_RESET_RESET_Msk (0x1UL << POWER_RESET_RESET_Pos) /*!< Bit mask of RESET field. */
+#define POWER_RESET_RESET_Disabled (0UL) /*!< Pin reset in debug interface mode disabled. */
+#define POWER_RESET_RESET_Enabled (1UL) /*!< Pin reset in debug interface mode enabled. */
+
+/* Register: POWER_RAMONB */
+/* Description: Ram on/off. */
+
+/* Bit 17 : RAM block 3 behaviour in OFF mode. */
+#define POWER_RAMONB_OFFRAM3_Pos (17UL) /*!< Position of OFFRAM3 field. */
+#define POWER_RAMONB_OFFRAM3_Msk (0x1UL << POWER_RAMONB_OFFRAM3_Pos) /*!< Bit mask of OFFRAM3 field. */
+#define POWER_RAMONB_OFFRAM3_RAM3Off (0UL) /*!< RAM block 3 OFF in OFF mode. */
+#define POWER_RAMONB_OFFRAM3_RAM3On (1UL) /*!< RAM block 3 ON in OFF mode. */
+
+/* Bit 16 : RAM block 2 behaviour in OFF mode. */
+#define POWER_RAMONB_OFFRAM2_Pos (16UL) /*!< Position of OFFRAM2 field. */
+#define POWER_RAMONB_OFFRAM2_Msk (0x1UL << POWER_RAMONB_OFFRAM2_Pos) /*!< Bit mask of OFFRAM2 field. */
+#define POWER_RAMONB_OFFRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in OFF mode. */
+#define POWER_RAMONB_OFFRAM2_RAM2On (1UL) /*!< RAM block 2 ON in OFF mode. */
+
+/* Bit 1 : RAM block 3 behaviour in ON mode. */
+#define POWER_RAMONB_ONRAM3_Pos (1UL) /*!< Position of ONRAM3 field. */
+#define POWER_RAMONB_ONRAM3_Msk (0x1UL << POWER_RAMONB_ONRAM3_Pos) /*!< Bit mask of ONRAM3 field. */
+#define POWER_RAMONB_ONRAM3_RAM3Off (0UL) /*!< RAM block 33 OFF in ON mode. */
+#define POWER_RAMONB_ONRAM3_RAM3On (1UL) /*!< RAM block 3 ON in ON mode. */
+
+/* Bit 0 : RAM block 2 behaviour in ON mode. */
+#define POWER_RAMONB_ONRAM2_Pos (0UL) /*!< Position of ONRAM2 field. */
+#define POWER_RAMONB_ONRAM2_Msk (0x1UL << POWER_RAMONB_ONRAM2_Pos) /*!< Bit mask of ONRAM2 field. */
+#define POWER_RAMONB_ONRAM2_RAM2Off (0UL) /*!< RAM block 2 OFF in ON mode. */
+#define POWER_RAMONB_ONRAM2_RAM2On (1UL) /*!< RAM block 2 ON in ON mode. */
+
+/* Register: POWER_DCDCEN */
+/* Description: DCDC converter enable configuration register. */
+
+/* Bit 0 : Enable DCDC converter. */
+#define POWER_DCDCEN_DCDCEN_Pos (0UL) /*!< Position of DCDCEN field. */
+#define POWER_DCDCEN_DCDCEN_Msk (0x1UL << POWER_DCDCEN_DCDCEN_Pos) /*!< Bit mask of DCDCEN field. */
+#define POWER_DCDCEN_DCDCEN_Disabled (0UL) /*!< DCDC converter disabled. */
+#define POWER_DCDCEN_DCDCEN_Enabled (1UL) /*!< DCDC converter enabled. */
+
+/* Register: POWER_DCDCFORCE */
+/* Description: DCDC power-up force register. */
+
+/* Bit 1 : DCDC power-up force on. */
+#define POWER_DCDCFORCE_FORCEON_Pos (1UL) /*!< Position of FORCEON field. */
+#define POWER_DCDCFORCE_FORCEON_Msk (0x1UL << POWER_DCDCFORCE_FORCEON_Pos) /*!< Bit mask of FORCEON field. */
+#define POWER_DCDCFORCE_FORCEON_NoForce (0UL) /*!< No force. */
+#define POWER_DCDCFORCE_FORCEON_Force (1UL) /*!< Force. */
+
+/* Bit 0 : DCDC power-up force off. */
+#define POWER_DCDCFORCE_FORCEOFF_Pos (0UL) /*!< Position of FORCEOFF field. */
+#define POWER_DCDCFORCE_FORCEOFF_Msk (0x1UL << POWER_DCDCFORCE_FORCEOFF_Pos) /*!< Bit mask of FORCEOFF field. */
+#define POWER_DCDCFORCE_FORCEOFF_NoForce (0UL) /*!< No force. */
+#define POWER_DCDCFORCE_FORCEOFF_Force (1UL) /*!< Force. */
+
+
+/* Peripheral: PPI */
+/* Description: PPI controller. */
+
+/* Register: PPI_CHEN */
+/* Description: Channel enable. */
+
+/* Bit 31 : Enable PPI channel 31. */
+#define PPI_CHEN_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHEN_CH31_Msk (0x1UL << PPI_CHEN_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHEN_CH31_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH31_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 30 : Enable PPI channel 30. */
+#define PPI_CHEN_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHEN_CH30_Msk (0x1UL << PPI_CHEN_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHEN_CH30_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH30_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 29 : Enable PPI channel 29. */
+#define PPI_CHEN_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHEN_CH29_Msk (0x1UL << PPI_CHEN_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHEN_CH29_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH29_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 28 : Enable PPI channel 28. */
+#define PPI_CHEN_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHEN_CH28_Msk (0x1UL << PPI_CHEN_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHEN_CH28_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH28_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 27 : Enable PPI channel 27. */
+#define PPI_CHEN_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHEN_CH27_Msk (0x1UL << PPI_CHEN_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHEN_CH27_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH27_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 26 : Enable PPI channel 26. */
+#define PPI_CHEN_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHEN_CH26_Msk (0x1UL << PPI_CHEN_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHEN_CH26_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH26_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 25 : Enable PPI channel 25. */
+#define PPI_CHEN_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHEN_CH25_Msk (0x1UL << PPI_CHEN_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHEN_CH25_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH25_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 24 : Enable PPI channel 24. */
+#define PPI_CHEN_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHEN_CH24_Msk (0x1UL << PPI_CHEN_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHEN_CH24_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH24_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 23 : Enable PPI channel 23. */
+#define PPI_CHEN_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHEN_CH23_Msk (0x1UL << PPI_CHEN_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHEN_CH23_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH23_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 22 : Enable PPI channel 22. */
+#define PPI_CHEN_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHEN_CH22_Msk (0x1UL << PPI_CHEN_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHEN_CH22_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH22_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 21 : Enable PPI channel 21. */
+#define PPI_CHEN_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHEN_CH21_Msk (0x1UL << PPI_CHEN_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHEN_CH21_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH21_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 20 : Enable PPI channel 20. */
+#define PPI_CHEN_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHEN_CH20_Msk (0x1UL << PPI_CHEN_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHEN_CH20_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH20_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 15 : Enable PPI channel 15. */
+#define PPI_CHEN_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHEN_CH15_Msk (0x1UL << PPI_CHEN_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHEN_CH15_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH15_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 14 : Enable PPI channel 14. */
+#define PPI_CHEN_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHEN_CH14_Msk (0x1UL << PPI_CHEN_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHEN_CH14_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH14_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 13 : Enable PPI channel 13. */
+#define PPI_CHEN_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHEN_CH13_Msk (0x1UL << PPI_CHEN_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHEN_CH13_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH13_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 12 : Enable PPI channel 12. */
+#define PPI_CHEN_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHEN_CH12_Msk (0x1UL << PPI_CHEN_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHEN_CH12_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH12_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 11 : Enable PPI channel 11. */
+#define PPI_CHEN_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHEN_CH11_Msk (0x1UL << PPI_CHEN_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHEN_CH11_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH11_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 10 : Enable PPI channel 10. */
+#define PPI_CHEN_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHEN_CH10_Msk (0x1UL << PPI_CHEN_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHEN_CH10_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH10_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 9 : Enable PPI channel 9. */
+#define PPI_CHEN_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHEN_CH9_Msk (0x1UL << PPI_CHEN_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHEN_CH9_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH9_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 8 : Enable PPI channel 8. */
+#define PPI_CHEN_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHEN_CH8_Msk (0x1UL << PPI_CHEN_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHEN_CH8_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH8_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 7 : Enable PPI channel 7. */
+#define PPI_CHEN_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHEN_CH7_Msk (0x1UL << PPI_CHEN_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHEN_CH7_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH7_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 6 : Enable PPI channel 6. */
+#define PPI_CHEN_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHEN_CH6_Msk (0x1UL << PPI_CHEN_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHEN_CH6_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH6_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 5 : Enable PPI channel 5. */
+#define PPI_CHEN_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHEN_CH5_Msk (0x1UL << PPI_CHEN_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHEN_CH5_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH5_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 4 : Enable PPI channel 4. */
+#define PPI_CHEN_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHEN_CH4_Msk (0x1UL << PPI_CHEN_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHEN_CH4_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH4_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 3 : Enable PPI channel 3. */
+#define PPI_CHEN_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHEN_CH3_Msk (0x1UL << PPI_CHEN_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHEN_CH3_Disabled (0UL) /*!< Channel disabled */
+#define PPI_CHEN_CH3_Enabled (1UL) /*!< Channel enabled */
+
+/* Bit 2 : Enable PPI channel 2. */
+#define PPI_CHEN_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHEN_CH2_Msk (0x1UL << PPI_CHEN_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHEN_CH2_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH2_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 1 : Enable PPI channel 1. */
+#define PPI_CHEN_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHEN_CH1_Msk (0x1UL << PPI_CHEN_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHEN_CH1_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH1_Enabled (1UL) /*!< Channel enabled. */
+
+/* Bit 0 : Enable PPI channel 0. */
+#define PPI_CHEN_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHEN_CH0_Msk (0x1UL << PPI_CHEN_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHEN_CH0_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHEN_CH0_Enabled (1UL) /*!< Channel enabled. */
+
+/* Register: PPI_CHENSET */
+/* Description: Channel enable set. */
+
+/* Bit 31 : Enable PPI channel 31. */
+#define PPI_CHENSET_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHENSET_CH31_Msk (0x1UL << PPI_CHENSET_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHENSET_CH31_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH31_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH31_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 30 : Enable PPI channel 30. */
+#define PPI_CHENSET_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHENSET_CH30_Msk (0x1UL << PPI_CHENSET_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHENSET_CH30_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH30_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH30_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 29 : Enable PPI channel 29. */
+#define PPI_CHENSET_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHENSET_CH29_Msk (0x1UL << PPI_CHENSET_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHENSET_CH29_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH29_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH29_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 28 : Enable PPI channel 28. */
+#define PPI_CHENSET_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHENSET_CH28_Msk (0x1UL << PPI_CHENSET_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHENSET_CH28_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH28_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH28_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 27 : Enable PPI channel 27. */
+#define PPI_CHENSET_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHENSET_CH27_Msk (0x1UL << PPI_CHENSET_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHENSET_CH27_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH27_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH27_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 26 : Enable PPI channel 26. */
+#define PPI_CHENSET_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHENSET_CH26_Msk (0x1UL << PPI_CHENSET_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHENSET_CH26_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH26_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH26_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 25 : Enable PPI channel 25. */
+#define PPI_CHENSET_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHENSET_CH25_Msk (0x1UL << PPI_CHENSET_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHENSET_CH25_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH25_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH25_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 24 : Enable PPI channel 24. */
+#define PPI_CHENSET_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHENSET_CH24_Msk (0x1UL << PPI_CHENSET_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHENSET_CH24_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH24_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH24_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 23 : Enable PPI channel 23. */
+#define PPI_CHENSET_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHENSET_CH23_Msk (0x1UL << PPI_CHENSET_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHENSET_CH23_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH23_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH23_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 22 : Enable PPI channel 22. */
+#define PPI_CHENSET_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHENSET_CH22_Msk (0x1UL << PPI_CHENSET_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHENSET_CH22_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH22_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH22_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 21 : Enable PPI channel 21. */
+#define PPI_CHENSET_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHENSET_CH21_Msk (0x1UL << PPI_CHENSET_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHENSET_CH21_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH21_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH21_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 20 : Enable PPI channel 20. */
+#define PPI_CHENSET_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHENSET_CH20_Msk (0x1UL << PPI_CHENSET_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHENSET_CH20_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH20_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH20_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 15 : Enable PPI channel 15. */
+#define PPI_CHENSET_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHENSET_CH15_Msk (0x1UL << PPI_CHENSET_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHENSET_CH15_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH15_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH15_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 14 : Enable PPI channel 14. */
+#define PPI_CHENSET_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHENSET_CH14_Msk (0x1UL << PPI_CHENSET_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHENSET_CH14_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH14_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH14_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 13 : Enable PPI channel 13. */
+#define PPI_CHENSET_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHENSET_CH13_Msk (0x1UL << PPI_CHENSET_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHENSET_CH13_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH13_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH13_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 12 : Enable PPI channel 12. */
+#define PPI_CHENSET_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHENSET_CH12_Msk (0x1UL << PPI_CHENSET_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHENSET_CH12_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH12_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH12_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 11 : Enable PPI channel 11. */
+#define PPI_CHENSET_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHENSET_CH11_Msk (0x1UL << PPI_CHENSET_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHENSET_CH11_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH11_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH11_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 10 : Enable PPI channel 10. */
+#define PPI_CHENSET_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHENSET_CH10_Msk (0x1UL << PPI_CHENSET_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHENSET_CH10_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH10_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH10_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 9 : Enable PPI channel 9. */
+#define PPI_CHENSET_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHENSET_CH9_Msk (0x1UL << PPI_CHENSET_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHENSET_CH9_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH9_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH9_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 8 : Enable PPI channel 8. */
+#define PPI_CHENSET_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHENSET_CH8_Msk (0x1UL << PPI_CHENSET_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHENSET_CH8_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH8_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH8_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 7 : Enable PPI channel 7. */
+#define PPI_CHENSET_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHENSET_CH7_Msk (0x1UL << PPI_CHENSET_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHENSET_CH7_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH7_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH7_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 6 : Enable PPI channel 6. */
+#define PPI_CHENSET_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHENSET_CH6_Msk (0x1UL << PPI_CHENSET_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHENSET_CH6_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH6_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH6_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 5 : Enable PPI channel 5. */
+#define PPI_CHENSET_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHENSET_CH5_Msk (0x1UL << PPI_CHENSET_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHENSET_CH5_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH5_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH5_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 4 : Enable PPI channel 4. */
+#define PPI_CHENSET_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHENSET_CH4_Msk (0x1UL << PPI_CHENSET_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHENSET_CH4_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH4_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH4_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 3 : Enable PPI channel 3. */
+#define PPI_CHENSET_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHENSET_CH3_Msk (0x1UL << PPI_CHENSET_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHENSET_CH3_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH3_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH3_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 2 : Enable PPI channel 2. */
+#define PPI_CHENSET_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHENSET_CH2_Msk (0x1UL << PPI_CHENSET_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHENSET_CH2_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH2_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH2_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 1 : Enable PPI channel 1. */
+#define PPI_CHENSET_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHENSET_CH1_Msk (0x1UL << PPI_CHENSET_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHENSET_CH1_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH1_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH1_Set (1UL) /*!< Enable channel on write. */
+
+/* Bit 0 : Enable PPI channel 0. */
+#define PPI_CHENSET_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHENSET_CH0_Msk (0x1UL << PPI_CHENSET_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHENSET_CH0_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENSET_CH0_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENSET_CH0_Set (1UL) /*!< Enable channel on write. */
+
+/* Register: PPI_CHENCLR */
+/* Description: Channel enable clear. */
+
+/* Bit 31 : Disable PPI channel 31. */
+#define PPI_CHENCLR_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHENCLR_CH31_Msk (0x1UL << PPI_CHENCLR_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHENCLR_CH31_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH31_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH31_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 30 : Disable PPI channel 30. */
+#define PPI_CHENCLR_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHENCLR_CH30_Msk (0x1UL << PPI_CHENCLR_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHENCLR_CH30_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH30_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH30_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 29 : Disable PPI channel 29. */
+#define PPI_CHENCLR_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHENCLR_CH29_Msk (0x1UL << PPI_CHENCLR_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHENCLR_CH29_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH29_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH29_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 28 : Disable PPI channel 28. */
+#define PPI_CHENCLR_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHENCLR_CH28_Msk (0x1UL << PPI_CHENCLR_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHENCLR_CH28_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH28_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH28_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 27 : Disable PPI channel 27. */
+#define PPI_CHENCLR_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHENCLR_CH27_Msk (0x1UL << PPI_CHENCLR_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHENCLR_CH27_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH27_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH27_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 26 : Disable PPI channel 26. */
+#define PPI_CHENCLR_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHENCLR_CH26_Msk (0x1UL << PPI_CHENCLR_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHENCLR_CH26_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH26_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH26_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 25 : Disable PPI channel 25. */
+#define PPI_CHENCLR_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHENCLR_CH25_Msk (0x1UL << PPI_CHENCLR_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHENCLR_CH25_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH25_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH25_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 24 : Disable PPI channel 24. */
+#define PPI_CHENCLR_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHENCLR_CH24_Msk (0x1UL << PPI_CHENCLR_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHENCLR_CH24_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH24_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH24_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 23 : Disable PPI channel 23. */
+#define PPI_CHENCLR_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHENCLR_CH23_Msk (0x1UL << PPI_CHENCLR_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHENCLR_CH23_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH23_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH23_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 22 : Disable PPI channel 22. */
+#define PPI_CHENCLR_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHENCLR_CH22_Msk (0x1UL << PPI_CHENCLR_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHENCLR_CH22_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH22_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH22_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 21 : Disable PPI channel 21. */
+#define PPI_CHENCLR_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHENCLR_CH21_Msk (0x1UL << PPI_CHENCLR_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHENCLR_CH21_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH21_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH21_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 20 : Disable PPI channel 20. */
+#define PPI_CHENCLR_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHENCLR_CH20_Msk (0x1UL << PPI_CHENCLR_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHENCLR_CH20_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH20_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH20_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 15 : Disable PPI channel 15. */
+#define PPI_CHENCLR_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHENCLR_CH15_Msk (0x1UL << PPI_CHENCLR_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHENCLR_CH15_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH15_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH15_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 14 : Disable PPI channel 14. */
+#define PPI_CHENCLR_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHENCLR_CH14_Msk (0x1UL << PPI_CHENCLR_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHENCLR_CH14_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH14_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH14_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 13 : Disable PPI channel 13. */
+#define PPI_CHENCLR_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHENCLR_CH13_Msk (0x1UL << PPI_CHENCLR_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHENCLR_CH13_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH13_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH13_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 12 : Disable PPI channel 12. */
+#define PPI_CHENCLR_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHENCLR_CH12_Msk (0x1UL << PPI_CHENCLR_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHENCLR_CH12_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH12_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH12_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 11 : Disable PPI channel 11. */
+#define PPI_CHENCLR_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHENCLR_CH11_Msk (0x1UL << PPI_CHENCLR_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHENCLR_CH11_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH11_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH11_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 10 : Disable PPI channel 10. */
+#define PPI_CHENCLR_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHENCLR_CH10_Msk (0x1UL << PPI_CHENCLR_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHENCLR_CH10_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH10_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH10_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 9 : Disable PPI channel 9. */
+#define PPI_CHENCLR_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHENCLR_CH9_Msk (0x1UL << PPI_CHENCLR_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHENCLR_CH9_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH9_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH9_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 8 : Disable PPI channel 8. */
+#define PPI_CHENCLR_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHENCLR_CH8_Msk (0x1UL << PPI_CHENCLR_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHENCLR_CH8_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH8_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH8_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 7 : Disable PPI channel 7. */
+#define PPI_CHENCLR_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHENCLR_CH7_Msk (0x1UL << PPI_CHENCLR_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHENCLR_CH7_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH7_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH7_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 6 : Disable PPI channel 6. */
+#define PPI_CHENCLR_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHENCLR_CH6_Msk (0x1UL << PPI_CHENCLR_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHENCLR_CH6_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH6_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH6_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 5 : Disable PPI channel 5. */
+#define PPI_CHENCLR_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHENCLR_CH5_Msk (0x1UL << PPI_CHENCLR_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHENCLR_CH5_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH5_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH5_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 4 : Disable PPI channel 4. */
+#define PPI_CHENCLR_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHENCLR_CH4_Msk (0x1UL << PPI_CHENCLR_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHENCLR_CH4_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH4_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH4_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 3 : Disable PPI channel 3. */
+#define PPI_CHENCLR_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHENCLR_CH3_Msk (0x1UL << PPI_CHENCLR_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHENCLR_CH3_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH3_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH3_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 2 : Disable PPI channel 2. */
+#define PPI_CHENCLR_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHENCLR_CH2_Msk (0x1UL << PPI_CHENCLR_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHENCLR_CH2_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH2_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH2_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 1 : Disable PPI channel 1. */
+#define PPI_CHENCLR_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHENCLR_CH1_Msk (0x1UL << PPI_CHENCLR_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHENCLR_CH1_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH1_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH1_Clear (1UL) /*!< Disable channel on write. */
+
+/* Bit 0 : Disable PPI channel 0. */
+#define PPI_CHENCLR_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHENCLR_CH0_Msk (0x1UL << PPI_CHENCLR_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHENCLR_CH0_Disabled (0UL) /*!< Channel disabled. */
+#define PPI_CHENCLR_CH0_Enabled (1UL) /*!< Channel enabled. */
+#define PPI_CHENCLR_CH0_Clear (1UL) /*!< Disable channel on write. */
+
+/* Register: PPI_CHG */
+/* Description: Channel group configuration. */
+
+/* Bit 31 : Include CH31 in channel group. */
+#define PPI_CHG_CH31_Pos (31UL) /*!< Position of CH31 field. */
+#define PPI_CHG_CH31_Msk (0x1UL << PPI_CHG_CH31_Pos) /*!< Bit mask of CH31 field. */
+#define PPI_CHG_CH31_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH31_Included (1UL) /*!< Channel included. */
+
+/* Bit 30 : Include CH30 in channel group. */
+#define PPI_CHG_CH30_Pos (30UL) /*!< Position of CH30 field. */
+#define PPI_CHG_CH30_Msk (0x1UL << PPI_CHG_CH30_Pos) /*!< Bit mask of CH30 field. */
+#define PPI_CHG_CH30_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH30_Included (1UL) /*!< Channel included. */
+
+/* Bit 29 : Include CH29 in channel group. */
+#define PPI_CHG_CH29_Pos (29UL) /*!< Position of CH29 field. */
+#define PPI_CHG_CH29_Msk (0x1UL << PPI_CHG_CH29_Pos) /*!< Bit mask of CH29 field. */
+#define PPI_CHG_CH29_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH29_Included (1UL) /*!< Channel included. */
+
+/* Bit 28 : Include CH28 in channel group. */
+#define PPI_CHG_CH28_Pos (28UL) /*!< Position of CH28 field. */
+#define PPI_CHG_CH28_Msk (0x1UL << PPI_CHG_CH28_Pos) /*!< Bit mask of CH28 field. */
+#define PPI_CHG_CH28_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH28_Included (1UL) /*!< Channel included. */
+
+/* Bit 27 : Include CH27 in channel group. */
+#define PPI_CHG_CH27_Pos (27UL) /*!< Position of CH27 field. */
+#define PPI_CHG_CH27_Msk (0x1UL << PPI_CHG_CH27_Pos) /*!< Bit mask of CH27 field. */
+#define PPI_CHG_CH27_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH27_Included (1UL) /*!< Channel included. */
+
+/* Bit 26 : Include CH26 in channel group. */
+#define PPI_CHG_CH26_Pos (26UL) /*!< Position of CH26 field. */
+#define PPI_CHG_CH26_Msk (0x1UL << PPI_CHG_CH26_Pos) /*!< Bit mask of CH26 field. */
+#define PPI_CHG_CH26_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH26_Included (1UL) /*!< Channel included. */
+
+/* Bit 25 : Include CH25 in channel group. */
+#define PPI_CHG_CH25_Pos (25UL) /*!< Position of CH25 field. */
+#define PPI_CHG_CH25_Msk (0x1UL << PPI_CHG_CH25_Pos) /*!< Bit mask of CH25 field. */
+#define PPI_CHG_CH25_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH25_Included (1UL) /*!< Channel included. */
+
+/* Bit 24 : Include CH24 in channel group. */
+#define PPI_CHG_CH24_Pos (24UL) /*!< Position of CH24 field. */
+#define PPI_CHG_CH24_Msk (0x1UL << PPI_CHG_CH24_Pos) /*!< Bit mask of CH24 field. */
+#define PPI_CHG_CH24_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH24_Included (1UL) /*!< Channel included. */
+
+/* Bit 23 : Include CH23 in channel group. */
+#define PPI_CHG_CH23_Pos (23UL) /*!< Position of CH23 field. */
+#define PPI_CHG_CH23_Msk (0x1UL << PPI_CHG_CH23_Pos) /*!< Bit mask of CH23 field. */
+#define PPI_CHG_CH23_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH23_Included (1UL) /*!< Channel included. */
+
+/* Bit 22 : Include CH22 in channel group. */
+#define PPI_CHG_CH22_Pos (22UL) /*!< Position of CH22 field. */
+#define PPI_CHG_CH22_Msk (0x1UL << PPI_CHG_CH22_Pos) /*!< Bit mask of CH22 field. */
+#define PPI_CHG_CH22_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH22_Included (1UL) /*!< Channel included. */
+
+/* Bit 21 : Include CH21 in channel group. */
+#define PPI_CHG_CH21_Pos (21UL) /*!< Position of CH21 field. */
+#define PPI_CHG_CH21_Msk (0x1UL << PPI_CHG_CH21_Pos) /*!< Bit mask of CH21 field. */
+#define PPI_CHG_CH21_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH21_Included (1UL) /*!< Channel included. */
+
+/* Bit 20 : Include CH20 in channel group. */
+#define PPI_CHG_CH20_Pos (20UL) /*!< Position of CH20 field. */
+#define PPI_CHG_CH20_Msk (0x1UL << PPI_CHG_CH20_Pos) /*!< Bit mask of CH20 field. */
+#define PPI_CHG_CH20_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH20_Included (1UL) /*!< Channel included. */
+
+/* Bit 15 : Include CH15 in channel group. */
+#define PPI_CHG_CH15_Pos (15UL) /*!< Position of CH15 field. */
+#define PPI_CHG_CH15_Msk (0x1UL << PPI_CHG_CH15_Pos) /*!< Bit mask of CH15 field. */
+#define PPI_CHG_CH15_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH15_Included (1UL) /*!< Channel included. */
+
+/* Bit 14 : Include CH14 in channel group. */
+#define PPI_CHG_CH14_Pos (14UL) /*!< Position of CH14 field. */
+#define PPI_CHG_CH14_Msk (0x1UL << PPI_CHG_CH14_Pos) /*!< Bit mask of CH14 field. */
+#define PPI_CHG_CH14_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH14_Included (1UL) /*!< Channel included. */
+
+/* Bit 13 : Include CH13 in channel group. */
+#define PPI_CHG_CH13_Pos (13UL) /*!< Position of CH13 field. */
+#define PPI_CHG_CH13_Msk (0x1UL << PPI_CHG_CH13_Pos) /*!< Bit mask of CH13 field. */
+#define PPI_CHG_CH13_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH13_Included (1UL) /*!< Channel included. */
+
+/* Bit 12 : Include CH12 in channel group. */
+#define PPI_CHG_CH12_Pos (12UL) /*!< Position of CH12 field. */
+#define PPI_CHG_CH12_Msk (0x1UL << PPI_CHG_CH12_Pos) /*!< Bit mask of CH12 field. */
+#define PPI_CHG_CH12_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH12_Included (1UL) /*!< Channel included. */
+
+/* Bit 11 : Include CH11 in channel group. */
+#define PPI_CHG_CH11_Pos (11UL) /*!< Position of CH11 field. */
+#define PPI_CHG_CH11_Msk (0x1UL << PPI_CHG_CH11_Pos) /*!< Bit mask of CH11 field. */
+#define PPI_CHG_CH11_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH11_Included (1UL) /*!< Channel included. */
+
+/* Bit 10 : Include CH10 in channel group. */
+#define PPI_CHG_CH10_Pos (10UL) /*!< Position of CH10 field. */
+#define PPI_CHG_CH10_Msk (0x1UL << PPI_CHG_CH10_Pos) /*!< Bit mask of CH10 field. */
+#define PPI_CHG_CH10_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH10_Included (1UL) /*!< Channel included. */
+
+/* Bit 9 : Include CH9 in channel group. */
+#define PPI_CHG_CH9_Pos (9UL) /*!< Position of CH9 field. */
+#define PPI_CHG_CH9_Msk (0x1UL << PPI_CHG_CH9_Pos) /*!< Bit mask of CH9 field. */
+#define PPI_CHG_CH9_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH9_Included (1UL) /*!< Channel included. */
+
+/* Bit 8 : Include CH8 in channel group. */
+#define PPI_CHG_CH8_Pos (8UL) /*!< Position of CH8 field. */
+#define PPI_CHG_CH8_Msk (0x1UL << PPI_CHG_CH8_Pos) /*!< Bit mask of CH8 field. */
+#define PPI_CHG_CH8_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH8_Included (1UL) /*!< Channel included. */
+
+/* Bit 7 : Include CH7 in channel group. */
+#define PPI_CHG_CH7_Pos (7UL) /*!< Position of CH7 field. */
+#define PPI_CHG_CH7_Msk (0x1UL << PPI_CHG_CH7_Pos) /*!< Bit mask of CH7 field. */
+#define PPI_CHG_CH7_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH7_Included (1UL) /*!< Channel included. */
+
+/* Bit 6 : Include CH6 in channel group. */
+#define PPI_CHG_CH6_Pos (6UL) /*!< Position of CH6 field. */
+#define PPI_CHG_CH6_Msk (0x1UL << PPI_CHG_CH6_Pos) /*!< Bit mask of CH6 field. */
+#define PPI_CHG_CH6_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH6_Included (1UL) /*!< Channel included. */
+
+/* Bit 5 : Include CH5 in channel group. */
+#define PPI_CHG_CH5_Pos (5UL) /*!< Position of CH5 field. */
+#define PPI_CHG_CH5_Msk (0x1UL << PPI_CHG_CH5_Pos) /*!< Bit mask of CH5 field. */
+#define PPI_CHG_CH5_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH5_Included (1UL) /*!< Channel included. */
+
+/* Bit 4 : Include CH4 in channel group. */
+#define PPI_CHG_CH4_Pos (4UL) /*!< Position of CH4 field. */
+#define PPI_CHG_CH4_Msk (0x1UL << PPI_CHG_CH4_Pos) /*!< Bit mask of CH4 field. */
+#define PPI_CHG_CH4_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH4_Included (1UL) /*!< Channel included. */
+
+/* Bit 3 : Include CH3 in channel group. */
+#define PPI_CHG_CH3_Pos (3UL) /*!< Position of CH3 field. */
+#define PPI_CHG_CH3_Msk (0x1UL << PPI_CHG_CH3_Pos) /*!< Bit mask of CH3 field. */
+#define PPI_CHG_CH3_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH3_Included (1UL) /*!< Channel included. */
+
+/* Bit 2 : Include CH2 in channel group. */
+#define PPI_CHG_CH2_Pos (2UL) /*!< Position of CH2 field. */
+#define PPI_CHG_CH2_Msk (0x1UL << PPI_CHG_CH2_Pos) /*!< Bit mask of CH2 field. */
+#define PPI_CHG_CH2_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH2_Included (1UL) /*!< Channel included. */
+
+/* Bit 1 : Include CH1 in channel group. */
+#define PPI_CHG_CH1_Pos (1UL) /*!< Position of CH1 field. */
+#define PPI_CHG_CH1_Msk (0x1UL << PPI_CHG_CH1_Pos) /*!< Bit mask of CH1 field. */
+#define PPI_CHG_CH1_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH1_Included (1UL) /*!< Channel included. */
+
+/* Bit 0 : Include CH0 in channel group. */
+#define PPI_CHG_CH0_Pos (0UL) /*!< Position of CH0 field. */
+#define PPI_CHG_CH0_Msk (0x1UL << PPI_CHG_CH0_Pos) /*!< Bit mask of CH0 field. */
+#define PPI_CHG_CH0_Excluded (0UL) /*!< Channel excluded. */
+#define PPI_CHG_CH0_Included (1UL) /*!< Channel included. */
+
+
+/* Peripheral: PU */
+/* Description: Patch unit. */
+
+/* Register: PU_PATCHADDR */
+/* Description: Relative address of patch instructions. */
+
+/* Bits 24..0 : Relative address of patch instructions. */
+#define PU_PATCHADDR_PATCHADDR_Pos (0UL) /*!< Position of PATCHADDR field. */
+#define PU_PATCHADDR_PATCHADDR_Msk (0x1FFFFFFUL << PU_PATCHADDR_PATCHADDR_Pos) /*!< Bit mask of PATCHADDR field. */
+
+/* Register: PU_PATCHEN */
+/* Description: Patch enable register. */
+
+/* Bit 7 : Patch 7 enabled. */
+#define PU_PATCHEN_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */
+#define PU_PATCHEN_PATCH7_Msk (0x1UL << PU_PATCHEN_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */
+#define PU_PATCHEN_PATCH7_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH7_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 6 : Patch 6 enabled. */
+#define PU_PATCHEN_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */
+#define PU_PATCHEN_PATCH6_Msk (0x1UL << PU_PATCHEN_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */
+#define PU_PATCHEN_PATCH6_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH6_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 5 : Patch 5 enabled. */
+#define PU_PATCHEN_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */
+#define PU_PATCHEN_PATCH5_Msk (0x1UL << PU_PATCHEN_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */
+#define PU_PATCHEN_PATCH5_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH5_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 4 : Patch 4 enabled. */
+#define PU_PATCHEN_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */
+#define PU_PATCHEN_PATCH4_Msk (0x1UL << PU_PATCHEN_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */
+#define PU_PATCHEN_PATCH4_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH4_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 3 : Patch 3 enabled. */
+#define PU_PATCHEN_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */
+#define PU_PATCHEN_PATCH3_Msk (0x1UL << PU_PATCHEN_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */
+#define PU_PATCHEN_PATCH3_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH3_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 2 : Patch 2 enabled. */
+#define PU_PATCHEN_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */
+#define PU_PATCHEN_PATCH2_Msk (0x1UL << PU_PATCHEN_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */
+#define PU_PATCHEN_PATCH2_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH2_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 1 : Patch 1 enabled. */
+#define PU_PATCHEN_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */
+#define PU_PATCHEN_PATCH1_Msk (0x1UL << PU_PATCHEN_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */
+#define PU_PATCHEN_PATCH1_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH1_Enabled (1UL) /*!< Patch enabled. */
+
+/* Bit 0 : Patch 0 enabled. */
+#define PU_PATCHEN_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */
+#define PU_PATCHEN_PATCH0_Msk (0x1UL << PU_PATCHEN_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */
+#define PU_PATCHEN_PATCH0_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHEN_PATCH0_Enabled (1UL) /*!< Patch enabled. */
+
+/* Register: PU_PATCHENSET */
+/* Description: Patch enable register. */
+
+/* Bit 7 : Patch 7 enabled. */
+#define PU_PATCHENSET_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */
+#define PU_PATCHENSET_PATCH7_Msk (0x1UL << PU_PATCHENSET_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */
+#define PU_PATCHENSET_PATCH7_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH7_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH7_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 6 : Patch 6 enabled. */
+#define PU_PATCHENSET_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */
+#define PU_PATCHENSET_PATCH6_Msk (0x1UL << PU_PATCHENSET_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */
+#define PU_PATCHENSET_PATCH6_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH6_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH6_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 5 : Patch 5 enabled. */
+#define PU_PATCHENSET_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */
+#define PU_PATCHENSET_PATCH5_Msk (0x1UL << PU_PATCHENSET_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */
+#define PU_PATCHENSET_PATCH5_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH5_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH5_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 4 : Patch 4 enabled. */
+#define PU_PATCHENSET_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */
+#define PU_PATCHENSET_PATCH4_Msk (0x1UL << PU_PATCHENSET_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */
+#define PU_PATCHENSET_PATCH4_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH4_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH4_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 3 : Patch 3 enabled. */
+#define PU_PATCHENSET_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */
+#define PU_PATCHENSET_PATCH3_Msk (0x1UL << PU_PATCHENSET_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */
+#define PU_PATCHENSET_PATCH3_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH3_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH3_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 2 : Patch 2 enabled. */
+#define PU_PATCHENSET_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */
+#define PU_PATCHENSET_PATCH2_Msk (0x1UL << PU_PATCHENSET_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */
+#define PU_PATCHENSET_PATCH2_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH2_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH2_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 1 : Patch 1 enabled. */
+#define PU_PATCHENSET_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */
+#define PU_PATCHENSET_PATCH1_Msk (0x1UL << PU_PATCHENSET_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */
+#define PU_PATCHENSET_PATCH1_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH1_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH1_Set (1UL) /*!< Enable patch on write. */
+
+/* Bit 0 : Patch 0 enabled. */
+#define PU_PATCHENSET_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */
+#define PU_PATCHENSET_PATCH0_Msk (0x1UL << PU_PATCHENSET_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */
+#define PU_PATCHENSET_PATCH0_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENSET_PATCH0_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENSET_PATCH0_Set (1UL) /*!< Enable patch on write. */
+
+/* Register: PU_PATCHENCLR */
+/* Description: Patch disable register. */
+
+/* Bit 7 : Patch 7 enabled. */
+#define PU_PATCHENCLR_PATCH7_Pos (7UL) /*!< Position of PATCH7 field. */
+#define PU_PATCHENCLR_PATCH7_Msk (0x1UL << PU_PATCHENCLR_PATCH7_Pos) /*!< Bit mask of PATCH7 field. */
+#define PU_PATCHENCLR_PATCH7_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH7_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH7_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 6 : Patch 6 enabled. */
+#define PU_PATCHENCLR_PATCH6_Pos (6UL) /*!< Position of PATCH6 field. */
+#define PU_PATCHENCLR_PATCH6_Msk (0x1UL << PU_PATCHENCLR_PATCH6_Pos) /*!< Bit mask of PATCH6 field. */
+#define PU_PATCHENCLR_PATCH6_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH6_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH6_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 5 : Patch 5 enabled. */
+#define PU_PATCHENCLR_PATCH5_Pos (5UL) /*!< Position of PATCH5 field. */
+#define PU_PATCHENCLR_PATCH5_Msk (0x1UL << PU_PATCHENCLR_PATCH5_Pos) /*!< Bit mask of PATCH5 field. */
+#define PU_PATCHENCLR_PATCH5_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH5_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH5_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 4 : Patch 4 enabled. */
+#define PU_PATCHENCLR_PATCH4_Pos (4UL) /*!< Position of PATCH4 field. */
+#define PU_PATCHENCLR_PATCH4_Msk (0x1UL << PU_PATCHENCLR_PATCH4_Pos) /*!< Bit mask of PATCH4 field. */
+#define PU_PATCHENCLR_PATCH4_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH4_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH4_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 3 : Patch 3 enabled. */
+#define PU_PATCHENCLR_PATCH3_Pos (3UL) /*!< Position of PATCH3 field. */
+#define PU_PATCHENCLR_PATCH3_Msk (0x1UL << PU_PATCHENCLR_PATCH3_Pos) /*!< Bit mask of PATCH3 field. */
+#define PU_PATCHENCLR_PATCH3_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH3_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH3_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 2 : Patch 2 enabled. */
+#define PU_PATCHENCLR_PATCH2_Pos (2UL) /*!< Position of PATCH2 field. */
+#define PU_PATCHENCLR_PATCH2_Msk (0x1UL << PU_PATCHENCLR_PATCH2_Pos) /*!< Bit mask of PATCH2 field. */
+#define PU_PATCHENCLR_PATCH2_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH2_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH2_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 1 : Patch 1 enabled. */
+#define PU_PATCHENCLR_PATCH1_Pos (1UL) /*!< Position of PATCH1 field. */
+#define PU_PATCHENCLR_PATCH1_Msk (0x1UL << PU_PATCHENCLR_PATCH1_Pos) /*!< Bit mask of PATCH1 field. */
+#define PU_PATCHENCLR_PATCH1_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH1_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH1_Clear (1UL) /*!< Disable patch on write. */
+
+/* Bit 0 : Patch 0 enabled. */
+#define PU_PATCHENCLR_PATCH0_Pos (0UL) /*!< Position of PATCH0 field. */
+#define PU_PATCHENCLR_PATCH0_Msk (0x1UL << PU_PATCHENCLR_PATCH0_Pos) /*!< Bit mask of PATCH0 field. */
+#define PU_PATCHENCLR_PATCH0_Disabled (0UL) /*!< Patch disabled. */
+#define PU_PATCHENCLR_PATCH0_Enabled (1UL) /*!< Patch enabled. */
+#define PU_PATCHENCLR_PATCH0_Clear (1UL) /*!< Disable patch on write. */
+
+
+/* Peripheral: QDEC */
+/* Description: Rotary decoder. */
+
+/* Register: QDEC_SHORTS */
+/* Description: Shortcuts for the QDEC. */
+
+/* Bit 1 : Shortcut between SAMPLERDY event and STOP task. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Pos (1UL) /*!< Position of SAMPLERDY_STOP field. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Msk (0x1UL << QDEC_SHORTS_SAMPLERDY_STOP_Pos) /*!< Bit mask of SAMPLERDY_STOP field. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define QDEC_SHORTS_SAMPLERDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between REPORTRDY event and READCLRACC task. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Pos (0UL) /*!< Position of REPORTRDY_READCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Msk (0x1UL << QDEC_SHORTS_REPORTRDY_READCLRACC_Pos) /*!< Bit mask of REPORTRDY_READCLRACC field. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Disabled (0UL) /*!< Shortcut disabled. */
+#define QDEC_SHORTS_REPORTRDY_READCLRACC_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: QDEC_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on ACCOF event. */
+#define QDEC_INTENSET_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
+#define QDEC_INTENSET_ACCOF_Msk (0x1UL << QDEC_INTENSET_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
+#define QDEC_INTENSET_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENSET_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENSET_ACCOF_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on REPORTRDY event. */
+#define QDEC_INTENSET_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
+#define QDEC_INTENSET_REPORTRDY_Msk (0x1UL << QDEC_INTENSET_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
+#define QDEC_INTENSET_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENSET_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENSET_REPORTRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on SAMPLERDY event. */
+#define QDEC_INTENSET_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
+#define QDEC_INTENSET_SAMPLERDY_Msk (0x1UL << QDEC_INTENSET_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
+#define QDEC_INTENSET_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENSET_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENSET_SAMPLERDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: QDEC_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on ACCOF event. */
+#define QDEC_INTENCLR_ACCOF_Pos (2UL) /*!< Position of ACCOF field. */
+#define QDEC_INTENCLR_ACCOF_Msk (0x1UL << QDEC_INTENCLR_ACCOF_Pos) /*!< Bit mask of ACCOF field. */
+#define QDEC_INTENCLR_ACCOF_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENCLR_ACCOF_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENCLR_ACCOF_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on REPORTRDY event. */
+#define QDEC_INTENCLR_REPORTRDY_Pos (1UL) /*!< Position of REPORTRDY field. */
+#define QDEC_INTENCLR_REPORTRDY_Msk (0x1UL << QDEC_INTENCLR_REPORTRDY_Pos) /*!< Bit mask of REPORTRDY field. */
+#define QDEC_INTENCLR_REPORTRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENCLR_REPORTRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENCLR_REPORTRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on SAMPLERDY event. */
+#define QDEC_INTENCLR_SAMPLERDY_Pos (0UL) /*!< Position of SAMPLERDY field. */
+#define QDEC_INTENCLR_SAMPLERDY_Msk (0x1UL << QDEC_INTENCLR_SAMPLERDY_Pos) /*!< Bit mask of SAMPLERDY field. */
+#define QDEC_INTENCLR_SAMPLERDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define QDEC_INTENCLR_SAMPLERDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define QDEC_INTENCLR_SAMPLERDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: QDEC_ENABLE */
+/* Description: Enable the QDEC. */
+
+/* Bit 0 : Enable or disable QDEC. */
+#define QDEC_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define QDEC_ENABLE_ENABLE_Msk (0x1UL << QDEC_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define QDEC_ENABLE_ENABLE_Disabled (0UL) /*!< Disabled QDEC. */
+#define QDEC_ENABLE_ENABLE_Enabled (1UL) /*!< Enable QDEC. */
+
+/* Register: QDEC_LEDPOL */
+/* Description: LED output pin polarity. */
+
+/* Bit 0 : LED output pin polarity. */
+#define QDEC_LEDPOL_LEDPOL_Pos (0UL) /*!< Position of LEDPOL field. */
+#define QDEC_LEDPOL_LEDPOL_Msk (0x1UL << QDEC_LEDPOL_LEDPOL_Pos) /*!< Bit mask of LEDPOL field. */
+#define QDEC_LEDPOL_LEDPOL_ActiveLow (0UL) /*!< LED output is active low. */
+#define QDEC_LEDPOL_LEDPOL_ActiveHigh (1UL) /*!< LED output is active high. */
+
+/* Register: QDEC_SAMPLEPER */
+/* Description: Sample period. */
+
+/* Bits 2..0 : Sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_Pos (0UL) /*!< Position of SAMPLEPER field. */
+#define QDEC_SAMPLEPER_SAMPLEPER_Msk (0x7UL << QDEC_SAMPLEPER_SAMPLEPER_Pos) /*!< Bit mask of SAMPLEPER field. */
+#define QDEC_SAMPLEPER_SAMPLEPER_128us (0x00UL) /*!< 128us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_256us (0x01UL) /*!< 256us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_512us (0x02UL) /*!< 512us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_1024us (0x03UL) /*!< 1024us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_2048us (0x04UL) /*!< 2048us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_4096us (0x05UL) /*!< 4096us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_8192us (0x06UL) /*!< 8192us sample period. */
+#define QDEC_SAMPLEPER_SAMPLEPER_16384us (0x07UL) /*!< 16384us sample period. */
+
+/* Register: QDEC_SAMPLE */
+/* Description: Motion sample value. */
+
+/* Bits 31..0 : Last sample taken in compliment to 2. */
+#define QDEC_SAMPLE_SAMPLE_Pos (0UL) /*!< Position of SAMPLE field. */
+#define QDEC_SAMPLE_SAMPLE_Msk (0xFFFFFFFFUL << QDEC_SAMPLE_SAMPLE_Pos) /*!< Bit mask of SAMPLE field. */
+
+/* Register: QDEC_REPORTPER */
+/* Description: Number of samples to generate an EVENT_REPORTRDY. */
+
+/* Bits 2..0 : Number of samples to generate an EVENT_REPORTRDY. */
+#define QDEC_REPORTPER_REPORTPER_Pos (0UL) /*!< Position of REPORTPER field. */
+#define QDEC_REPORTPER_REPORTPER_Msk (0x7UL << QDEC_REPORTPER_REPORTPER_Pos) /*!< Bit mask of REPORTPER field. */
+#define QDEC_REPORTPER_REPORTPER_10Smpl (0x00UL) /*!< 10 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_40Smpl (0x01UL) /*!< 40 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_80Smpl (0x02UL) /*!< 80 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_120Smpl (0x03UL) /*!< 120 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_160Smpl (0x04UL) /*!< 160 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_200Smpl (0x05UL) /*!< 200 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_240Smpl (0x06UL) /*!< 240 samples per report. */
+#define QDEC_REPORTPER_REPORTPER_280Smpl (0x07UL) /*!< 280 samples per report. */
+
+/* Register: QDEC_DBFEN */
+/* Description: Enable debouncer input filters. */
+
+/* Bit 0 : Enable debounce input filters. */
+#define QDEC_DBFEN_DBFEN_Pos (0UL) /*!< Position of DBFEN field. */
+#define QDEC_DBFEN_DBFEN_Msk (0x1UL << QDEC_DBFEN_DBFEN_Pos) /*!< Bit mask of DBFEN field. */
+#define QDEC_DBFEN_DBFEN_Disabled (0UL) /*!< Debounce input filters disabled. */
+#define QDEC_DBFEN_DBFEN_Enabled (1UL) /*!< Debounce input filters enabled. */
+
+/* Register: QDEC_LEDPRE */
+/* Description: Time LED is switched ON before the sample. */
+
+/* Bits 8..0 : Period in us the LED in switched on prior to sampling. */
+#define QDEC_LEDPRE_LEDPRE_Pos (0UL) /*!< Position of LEDPRE field. */
+#define QDEC_LEDPRE_LEDPRE_Msk (0x1FFUL << QDEC_LEDPRE_LEDPRE_Pos) /*!< Bit mask of LEDPRE field. */
+
+/* Register: QDEC_ACCDBL */
+/* Description: Accumulated double (error) transitions register. */
+
+/* Bits 3..0 : Accumulated double (error) transitions. */
+#define QDEC_ACCDBL_ACCDBL_Pos (0UL) /*!< Position of ACCDBL field. */
+#define QDEC_ACCDBL_ACCDBL_Msk (0xFUL << QDEC_ACCDBL_ACCDBL_Pos) /*!< Bit mask of ACCDBL field. */
+
+/* Register: QDEC_ACCDBLREAD */
+/* Description: Snapshot of ACCDBL register. Value generated by the TASKS_READCLEACC task. */
+
+/* Bits 3..0 : Snapshot of accumulated double (error) transitions. */
+#define QDEC_ACCDBLREAD_ACCDBLREAD_Pos (0UL) /*!< Position of ACCDBLREAD field. */
+#define QDEC_ACCDBLREAD_ACCDBLREAD_Msk (0xFUL << QDEC_ACCDBLREAD_ACCDBLREAD_Pos) /*!< Bit mask of ACCDBLREAD field. */
+
+/* Register: QDEC_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define QDEC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define QDEC_POWER_POWER_Msk (0x1UL << QDEC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define QDEC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define QDEC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: RADIO */
+/* Description: The radio. */
+
+/* Register: RADIO_SHORTS */
+/* Description: Shortcuts for the radio. */
+
+/* Bit 8 : Shortcut between DISABLED event and RSSISTOP task. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Pos (8UL) /*!< Position of DISABLED_RSSISTOP field. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Msk (0x1UL << RADIO_SHORTS_DISABLED_RSSISTOP_Pos) /*!< Bit mask of DISABLED_RSSISTOP field. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_DISABLED_RSSISTOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 6 : Shortcut between ADDRESS event and BCSTART task. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Pos (6UL) /*!< Position of ADDRESS_BCSTART field. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_BCSTART_Pos) /*!< Bit mask of ADDRESS_BCSTART field. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_ADDRESS_BCSTART_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 5 : Shortcut between END event and START task. */
+#define RADIO_SHORTS_END_START_Pos (5UL) /*!< Position of END_START field. */
+#define RADIO_SHORTS_END_START_Msk (0x1UL << RADIO_SHORTS_END_START_Pos) /*!< Bit mask of END_START field. */
+#define RADIO_SHORTS_END_START_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_END_START_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 4 : Shortcut between ADDRESS event and RSSISTART task. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Pos (4UL) /*!< Position of ADDRESS_RSSISTART field. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Msk (0x1UL << RADIO_SHORTS_ADDRESS_RSSISTART_Pos) /*!< Bit mask of ADDRESS_RSSISTART field. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_ADDRESS_RSSISTART_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between DISABLED event and RXEN task. */
+#define RADIO_SHORTS_DISABLED_RXEN_Pos (3UL) /*!< Position of DISABLED_RXEN field. */
+#define RADIO_SHORTS_DISABLED_RXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_RXEN_Pos) /*!< Bit mask of DISABLED_RXEN field. */
+#define RADIO_SHORTS_DISABLED_RXEN_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_DISABLED_RXEN_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 2 : Shortcut between DISABLED event and TXEN task. */
+#define RADIO_SHORTS_DISABLED_TXEN_Pos (2UL) /*!< Position of DISABLED_TXEN field. */
+#define RADIO_SHORTS_DISABLED_TXEN_Msk (0x1UL << RADIO_SHORTS_DISABLED_TXEN_Pos) /*!< Bit mask of DISABLED_TXEN field. */
+#define RADIO_SHORTS_DISABLED_TXEN_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_DISABLED_TXEN_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 1 : Shortcut between END event and DISABLE task. */
+#define RADIO_SHORTS_END_DISABLE_Pos (1UL) /*!< Position of END_DISABLE field. */
+#define RADIO_SHORTS_END_DISABLE_Msk (0x1UL << RADIO_SHORTS_END_DISABLE_Pos) /*!< Bit mask of END_DISABLE field. */
+#define RADIO_SHORTS_END_DISABLE_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_END_DISABLE_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between READY event and START task. */
+#define RADIO_SHORTS_READY_START_Pos (0UL) /*!< Position of READY_START field. */
+#define RADIO_SHORTS_READY_START_Msk (0x1UL << RADIO_SHORTS_READY_START_Pos) /*!< Bit mask of READY_START field. */
+#define RADIO_SHORTS_READY_START_Disabled (0UL) /*!< Shortcut disabled. */
+#define RADIO_SHORTS_READY_START_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: RADIO_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 10 : Enable interrupt on BCMATCH event. */
+#define RADIO_INTENSET_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
+#define RADIO_INTENSET_BCMATCH_Msk (0x1UL << RADIO_INTENSET_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
+#define RADIO_INTENSET_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_BCMATCH_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 7 : Enable interrupt on RSSIEND event. */
+#define RADIO_INTENSET_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
+#define RADIO_INTENSET_RSSIEND_Msk (0x1UL << RADIO_INTENSET_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
+#define RADIO_INTENSET_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_RSSIEND_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 6 : Enable interrupt on DEVMISS event. */
+#define RADIO_INTENSET_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
+#define RADIO_INTENSET_DEVMISS_Msk (0x1UL << RADIO_INTENSET_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
+#define RADIO_INTENSET_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_DEVMISS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 5 : Enable interrupt on DEVMATCH event. */
+#define RADIO_INTENSET_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
+#define RADIO_INTENSET_DEVMATCH_Msk (0x1UL << RADIO_INTENSET_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
+#define RADIO_INTENSET_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_DEVMATCH_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 4 : Enable interrupt on DISABLED event. */
+#define RADIO_INTENSET_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
+#define RADIO_INTENSET_DISABLED_Msk (0x1UL << RADIO_INTENSET_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
+#define RADIO_INTENSET_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_DISABLED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 3 : Enable interrupt on END event. */
+#define RADIO_INTENSET_END_Pos (3UL) /*!< Position of END field. */
+#define RADIO_INTENSET_END_Msk (0x1UL << RADIO_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define RADIO_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on PAYLOAD event. */
+#define RADIO_INTENSET_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
+#define RADIO_INTENSET_PAYLOAD_Msk (0x1UL << RADIO_INTENSET_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
+#define RADIO_INTENSET_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_PAYLOAD_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on ADDRESS event. */
+#define RADIO_INTENSET_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
+#define RADIO_INTENSET_ADDRESS_Msk (0x1UL << RADIO_INTENSET_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+#define RADIO_INTENSET_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_ADDRESS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on READY event. */
+#define RADIO_INTENSET_READY_Pos (0UL) /*!< Position of READY field. */
+#define RADIO_INTENSET_READY_Msk (0x1UL << RADIO_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define RADIO_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: RADIO_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 10 : Disable interrupt on BCMATCH event. */
+#define RADIO_INTENCLR_BCMATCH_Pos (10UL) /*!< Position of BCMATCH field. */
+#define RADIO_INTENCLR_BCMATCH_Msk (0x1UL << RADIO_INTENCLR_BCMATCH_Pos) /*!< Bit mask of BCMATCH field. */
+#define RADIO_INTENCLR_BCMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_BCMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_BCMATCH_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 7 : Disable interrupt on RSSIEND event. */
+#define RADIO_INTENCLR_RSSIEND_Pos (7UL) /*!< Position of RSSIEND field. */
+#define RADIO_INTENCLR_RSSIEND_Msk (0x1UL << RADIO_INTENCLR_RSSIEND_Pos) /*!< Bit mask of RSSIEND field. */
+#define RADIO_INTENCLR_RSSIEND_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_RSSIEND_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_RSSIEND_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 6 : Disable interrupt on DEVMISS event. */
+#define RADIO_INTENCLR_DEVMISS_Pos (6UL) /*!< Position of DEVMISS field. */
+#define RADIO_INTENCLR_DEVMISS_Msk (0x1UL << RADIO_INTENCLR_DEVMISS_Pos) /*!< Bit mask of DEVMISS field. */
+#define RADIO_INTENCLR_DEVMISS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_DEVMISS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_DEVMISS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 5 : Disable interrupt on DEVMATCH event. */
+#define RADIO_INTENCLR_DEVMATCH_Pos (5UL) /*!< Position of DEVMATCH field. */
+#define RADIO_INTENCLR_DEVMATCH_Msk (0x1UL << RADIO_INTENCLR_DEVMATCH_Pos) /*!< Bit mask of DEVMATCH field. */
+#define RADIO_INTENCLR_DEVMATCH_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_DEVMATCH_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_DEVMATCH_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 4 : Disable interrupt on DISABLED event. */
+#define RADIO_INTENCLR_DISABLED_Pos (4UL) /*!< Position of DISABLED field. */
+#define RADIO_INTENCLR_DISABLED_Msk (0x1UL << RADIO_INTENCLR_DISABLED_Pos) /*!< Bit mask of DISABLED field. */
+#define RADIO_INTENCLR_DISABLED_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_DISABLED_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_DISABLED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 3 : Disable interrupt on END event. */
+#define RADIO_INTENCLR_END_Pos (3UL) /*!< Position of END field. */
+#define RADIO_INTENCLR_END_Msk (0x1UL << RADIO_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define RADIO_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on PAYLOAD event. */
+#define RADIO_INTENCLR_PAYLOAD_Pos (2UL) /*!< Position of PAYLOAD field. */
+#define RADIO_INTENCLR_PAYLOAD_Msk (0x1UL << RADIO_INTENCLR_PAYLOAD_Pos) /*!< Bit mask of PAYLOAD field. */
+#define RADIO_INTENCLR_PAYLOAD_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_PAYLOAD_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_PAYLOAD_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on ADDRESS event. */
+#define RADIO_INTENCLR_ADDRESS_Pos (1UL) /*!< Position of ADDRESS field. */
+#define RADIO_INTENCLR_ADDRESS_Msk (0x1UL << RADIO_INTENCLR_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+#define RADIO_INTENCLR_ADDRESS_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_ADDRESS_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_ADDRESS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on READY event. */
+#define RADIO_INTENCLR_READY_Pos (0UL) /*!< Position of READY field. */
+#define RADIO_INTENCLR_READY_Msk (0x1UL << RADIO_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define RADIO_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RADIO_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RADIO_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: RADIO_CRCSTATUS */
+/* Description: CRC status of received packet. */
+
+/* Bit 0 : CRC status of received packet. */
+#define RADIO_CRCSTATUS_CRCSTATUS_Pos (0UL) /*!< Position of CRCSTATUS field. */
+#define RADIO_CRCSTATUS_CRCSTATUS_Msk (0x1UL << RADIO_CRCSTATUS_CRCSTATUS_Pos) /*!< Bit mask of CRCSTATUS field. */
+#define RADIO_CRCSTATUS_CRCSTATUS_CRCError (0UL) /*!< Packet received with CRC error. */
+#define RADIO_CRCSTATUS_CRCSTATUS_CRCOk (1UL) /*!< Packet received with CRC ok. */
+
+/* Register: RADIO_CD */
+/* Description: Carrier detect. */
+
+/* Bit 0 : Carrier detect. */
+#define RADIO_CD_CD_Pos (0UL) /*!< Position of CD field. */
+#define RADIO_CD_CD_Msk (0x1UL << RADIO_CD_CD_Pos) /*!< Bit mask of CD field. */
+
+/* Register: RADIO_RXMATCH */
+/* Description: Received address. */
+
+/* Bits 2..0 : Logical address in which previous packet was received. */
+#define RADIO_RXMATCH_RXMATCH_Pos (0UL) /*!< Position of RXMATCH field. */
+#define RADIO_RXMATCH_RXMATCH_Msk (0x7UL << RADIO_RXMATCH_RXMATCH_Pos) /*!< Bit mask of RXMATCH field. */
+
+/* Register: RADIO_RXCRC */
+/* Description: Received CRC. */
+
+/* Bits 23..0 : CRC field of previously received packet. */
+#define RADIO_RXCRC_RXCRC_Pos (0UL) /*!< Position of RXCRC field. */
+#define RADIO_RXCRC_RXCRC_Msk (0xFFFFFFUL << RADIO_RXCRC_RXCRC_Pos) /*!< Bit mask of RXCRC field. */
+
+/* Register: RADIO_DAI */
+/* Description: Device address match index. */
+
+/* Bits 2..0 : Index (n) of device address (see DAB[n] and DAP[n]) that obtained an address match. */
+#define RADIO_DAI_DAI_Pos (0UL) /*!< Position of DAI field. */
+#define RADIO_DAI_DAI_Msk (0x7UL << RADIO_DAI_DAI_Pos) /*!< Bit mask of DAI field. */
+
+/* Register: RADIO_FREQUENCY */
+/* Description: Frequency. */
+
+/* Bits 6..0 : Radio channel frequency offset in MHz: RF Frequency = 2400 + FREQUENCY (MHz). Decision point: TXEN or RXEN task. */
+#define RADIO_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define RADIO_FREQUENCY_FREQUENCY_Msk (0x7FUL << RADIO_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+
+/* Register: RADIO_TXPOWER */
+/* Description: Output power. */
+
+/* Bits 7..0 : Radio output power. Decision point: TXEN task. */
+#define RADIO_TXPOWER_TXPOWER_Pos (0UL) /*!< Position of TXPOWER field. */
+#define RADIO_TXPOWER_TXPOWER_Msk (0xFFUL << RADIO_TXPOWER_TXPOWER_Pos) /*!< Bit mask of TXPOWER field. */
+#define RADIO_TXPOWER_TXPOWER_Pos4dBm (0x04UL) /*!< +4dBm. */
+#define RADIO_TXPOWER_TXPOWER_0dBm (0x00UL) /*!< 0dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg4dBm (0xFCUL) /*!< -4dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg8dBm (0xF8UL) /*!< -8dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg12dBm (0xF4UL) /*!< -12dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg16dBm (0xF0UL) /*!< -16dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg20dBm (0xECUL) /*!< -20dBm. */
+#define RADIO_TXPOWER_TXPOWER_Neg30dBm (0xD8UL) /*!< -30dBm. */
+
+/* Register: RADIO_MODE */
+/* Description: Data rate and modulation. */
+
+/* Bits 1..0 : Radio data rate and modulation setting. Decision point: TXEN or RXEN task. */
+#define RADIO_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define RADIO_MODE_MODE_Msk (0x3UL << RADIO_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define RADIO_MODE_MODE_Nrf_1Mbit (0x00UL) /*!< 1Mbit/s Nordic propietary radio mode. */
+#define RADIO_MODE_MODE_Nrf_2Mbit (0x01UL) /*!< 2Mbit/s Nordic propietary radio mode. */
+#define RADIO_MODE_MODE_Nrf_250Kbit (0x02UL) /*!< 250kbit/s Nordic propietary radio mode. */
+#define RADIO_MODE_MODE_Ble_1Mbit (0x03UL) /*!< 1Mbit/s Bluetooth Low Energy */
+
+/* Register: RADIO_PCNF0 */
+/* Description: Packet configuration 0. */
+
+/* Bits 19..16 : Length of S1 field in number of bits. Decision point: START task. */
+#define RADIO_PCNF0_S1LEN_Pos (16UL) /*!< Position of S1LEN field. */
+#define RADIO_PCNF0_S1LEN_Msk (0xFUL << RADIO_PCNF0_S1LEN_Pos) /*!< Bit mask of S1LEN field. */
+
+/* Bit 8 : Length of S0 field in number of bytes. Decision point: START task. */
+#define RADIO_PCNF0_S0LEN_Pos (8UL) /*!< Position of S0LEN field. */
+#define RADIO_PCNF0_S0LEN_Msk (0x1UL << RADIO_PCNF0_S0LEN_Pos) /*!< Bit mask of S0LEN field. */
+
+/* Bits 3..0 : Length of length field in number of bits. Decision point: START task. */
+#define RADIO_PCNF0_LFLEN_Pos (0UL) /*!< Position of LFLEN field. */
+#define RADIO_PCNF0_LFLEN_Msk (0xFUL << RADIO_PCNF0_LFLEN_Pos) /*!< Bit mask of LFLEN field. */
+
+/* Register: RADIO_PCNF1 */
+/* Description: Packet configuration 1. */
+
+/* Bit 25 : Packet whitening enable. */
+#define RADIO_PCNF1_WHITEEN_Pos (25UL) /*!< Position of WHITEEN field. */
+#define RADIO_PCNF1_WHITEEN_Msk (0x1UL << RADIO_PCNF1_WHITEEN_Pos) /*!< Bit mask of WHITEEN field. */
+#define RADIO_PCNF1_WHITEEN_Disabled (0UL) /*!< Whitening disabled. */
+#define RADIO_PCNF1_WHITEEN_Enabled (1UL) /*!< Whitening enabled. */
+
+/* Bit 24 : On air endianness of packet length field. Decision point: START task. */
+#define RADIO_PCNF1_ENDIAN_Pos (24UL) /*!< Position of ENDIAN field. */
+#define RADIO_PCNF1_ENDIAN_Msk (0x1UL << RADIO_PCNF1_ENDIAN_Pos) /*!< Bit mask of ENDIAN field. */
+#define RADIO_PCNF1_ENDIAN_Little (0UL) /*!< Least significant bit on air first */
+#define RADIO_PCNF1_ENDIAN_Big (1UL) /*!< Most significant bit on air first */
+
+/* Bits 18..16 : Base address length in number of bytes. Decision point: START task. */
+#define RADIO_PCNF1_BALEN_Pos (16UL) /*!< Position of BALEN field. */
+#define RADIO_PCNF1_BALEN_Msk (0x7UL << RADIO_PCNF1_BALEN_Pos) /*!< Bit mask of BALEN field. */
+
+/* Bits 15..8 : Static length in number of bytes. Decision point: START task. */
+#define RADIO_PCNF1_STATLEN_Pos (8UL) /*!< Position of STATLEN field. */
+#define RADIO_PCNF1_STATLEN_Msk (0xFFUL << RADIO_PCNF1_STATLEN_Pos) /*!< Bit mask of STATLEN field. */
+
+/* Bits 7..0 : Maximum length of packet payload in number of bytes. */
+#define RADIO_PCNF1_MAXLEN_Pos (0UL) /*!< Position of MAXLEN field. */
+#define RADIO_PCNF1_MAXLEN_Msk (0xFFUL << RADIO_PCNF1_MAXLEN_Pos) /*!< Bit mask of MAXLEN field. */
+
+/* Register: RADIO_PREFIX0 */
+/* Description: Prefixes bytes for logical addresses 0 to 3. */
+
+/* Bits 31..24 : Address prefix 3. Decision point: START task. */
+#define RADIO_PREFIX0_AP3_Pos (24UL) /*!< Position of AP3 field. */
+#define RADIO_PREFIX0_AP3_Msk (0xFFUL << RADIO_PREFIX0_AP3_Pos) /*!< Bit mask of AP3 field. */
+
+/* Bits 23..16 : Address prefix 2. Decision point: START task. */
+#define RADIO_PREFIX0_AP2_Pos (16UL) /*!< Position of AP2 field. */
+#define RADIO_PREFIX0_AP2_Msk (0xFFUL << RADIO_PREFIX0_AP2_Pos) /*!< Bit mask of AP2 field. */
+
+/* Bits 15..8 : Address prefix 1. Decision point: START task. */
+#define RADIO_PREFIX0_AP1_Pos (8UL) /*!< Position of AP1 field. */
+#define RADIO_PREFIX0_AP1_Msk (0xFFUL << RADIO_PREFIX0_AP1_Pos) /*!< Bit mask of AP1 field. */
+
+/* Bits 7..0 : Address prefix 0. Decision point: START task. */
+#define RADIO_PREFIX0_AP0_Pos (0UL) /*!< Position of AP0 field. */
+#define RADIO_PREFIX0_AP0_Msk (0xFFUL << RADIO_PREFIX0_AP0_Pos) /*!< Bit mask of AP0 field. */
+
+/* Register: RADIO_PREFIX1 */
+/* Description: Prefixes bytes for logical addresses 4 to 7. */
+
+/* Bits 31..24 : Address prefix 7. Decision point: START task. */
+#define RADIO_PREFIX1_AP7_Pos (24UL) /*!< Position of AP7 field. */
+#define RADIO_PREFIX1_AP7_Msk (0xFFUL << RADIO_PREFIX1_AP7_Pos) /*!< Bit mask of AP7 field. */
+
+/* Bits 23..16 : Address prefix 6. Decision point: START task. */
+#define RADIO_PREFIX1_AP6_Pos (16UL) /*!< Position of AP6 field. */
+#define RADIO_PREFIX1_AP6_Msk (0xFFUL << RADIO_PREFIX1_AP6_Pos) /*!< Bit mask of AP6 field. */
+
+/* Bits 15..8 : Address prefix 5. Decision point: START task. */
+#define RADIO_PREFIX1_AP5_Pos (8UL) /*!< Position of AP5 field. */
+#define RADIO_PREFIX1_AP5_Msk (0xFFUL << RADIO_PREFIX1_AP5_Pos) /*!< Bit mask of AP5 field. */
+
+/* Bits 7..0 : Address prefix 4. Decision point: START task. */
+#define RADIO_PREFIX1_AP4_Pos (0UL) /*!< Position of AP4 field. */
+#define RADIO_PREFIX1_AP4_Msk (0xFFUL << RADIO_PREFIX1_AP4_Pos) /*!< Bit mask of AP4 field. */
+
+/* Register: RADIO_TXADDRESS */
+/* Description: Transmit address select. */
+
+/* Bits 2..0 : Logical address to be used when transmitting a packet. Decision point: START task. */
+#define RADIO_TXADDRESS_TXADDRESS_Pos (0UL) /*!< Position of TXADDRESS field. */
+#define RADIO_TXADDRESS_TXADDRESS_Msk (0x7UL << RADIO_TXADDRESS_TXADDRESS_Pos) /*!< Bit mask of TXADDRESS field. */
+
+/* Register: RADIO_RXADDRESSES */
+/* Description: Receive address select. */
+
+/* Bit 7 : Enable reception on logical address 7. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR7_Pos (7UL) /*!< Position of ADDR7 field. */
+#define RADIO_RXADDRESSES_ADDR7_Msk (0x1UL << RADIO_RXADDRESSES_ADDR7_Pos) /*!< Bit mask of ADDR7 field. */
+#define RADIO_RXADDRESSES_ADDR7_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR7_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 6 : Enable reception on logical address 6. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR6_Pos (6UL) /*!< Position of ADDR6 field. */
+#define RADIO_RXADDRESSES_ADDR6_Msk (0x1UL << RADIO_RXADDRESSES_ADDR6_Pos) /*!< Bit mask of ADDR6 field. */
+#define RADIO_RXADDRESSES_ADDR6_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR6_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 5 : Enable reception on logical address 5. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR5_Pos (5UL) /*!< Position of ADDR5 field. */
+#define RADIO_RXADDRESSES_ADDR5_Msk (0x1UL << RADIO_RXADDRESSES_ADDR5_Pos) /*!< Bit mask of ADDR5 field. */
+#define RADIO_RXADDRESSES_ADDR5_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR5_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 4 : Enable reception on logical address 4. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR4_Pos (4UL) /*!< Position of ADDR4 field. */
+#define RADIO_RXADDRESSES_ADDR4_Msk (0x1UL << RADIO_RXADDRESSES_ADDR4_Pos) /*!< Bit mask of ADDR4 field. */
+#define RADIO_RXADDRESSES_ADDR4_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR4_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 3 : Enable reception on logical address 3. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR3_Pos (3UL) /*!< Position of ADDR3 field. */
+#define RADIO_RXADDRESSES_ADDR3_Msk (0x1UL << RADIO_RXADDRESSES_ADDR3_Pos) /*!< Bit mask of ADDR3 field. */
+#define RADIO_RXADDRESSES_ADDR3_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR3_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 2 : Enable reception on logical address 2. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR2_Pos (2UL) /*!< Position of ADDR2 field. */
+#define RADIO_RXADDRESSES_ADDR2_Msk (0x1UL << RADIO_RXADDRESSES_ADDR2_Pos) /*!< Bit mask of ADDR2 field. */
+#define RADIO_RXADDRESSES_ADDR2_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR2_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 1 : Enable reception on logical address 1. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR1_Pos (1UL) /*!< Position of ADDR1 field. */
+#define RADIO_RXADDRESSES_ADDR1_Msk (0x1UL << RADIO_RXADDRESSES_ADDR1_Pos) /*!< Bit mask of ADDR1 field. */
+#define RADIO_RXADDRESSES_ADDR1_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR1_Enabled (1UL) /*!< Reception enabled. */
+
+/* Bit 0 : Enable reception on logical address 0. Decision point: START task. */
+#define RADIO_RXADDRESSES_ADDR0_Pos (0UL) /*!< Position of ADDR0 field. */
+#define RADIO_RXADDRESSES_ADDR0_Msk (0x1UL << RADIO_RXADDRESSES_ADDR0_Pos) /*!< Bit mask of ADDR0 field. */
+#define RADIO_RXADDRESSES_ADDR0_Disabled (0UL) /*!< Reception disabled. */
+#define RADIO_RXADDRESSES_ADDR0_Enabled (1UL) /*!< Reception enabled. */
+
+/* Register: RADIO_CRCCNF */
+/* Description: CRC configuration. */
+
+/* Bit 8 : Leave packet address field out of the CRC calculation. Decision point: START task. */
+#define RADIO_CRCCNF_SKIPADDR_Pos (8UL) /*!< Position of SKIPADDR field. */
+#define RADIO_CRCCNF_SKIPADDR_Msk (0x1UL << RADIO_CRCCNF_SKIPADDR_Pos) /*!< Bit mask of SKIPADDR field. */
+#define RADIO_CRCCNF_SKIPADDR_Include (0UL) /*!< Include packet address in CRC calculation. */
+#define RADIO_CRCCNF_SKIPADDR_Skip (1UL) /*!< Packet address is skipped in CRC calculation. The CRC calculation will start at the first byte after the address. */
+
+/* Bits 1..0 : CRC length. Decision point: START task. */
+#define RADIO_CRCCNF_LEN_Pos (0UL) /*!< Position of LEN field. */
+#define RADIO_CRCCNF_LEN_Msk (0x3UL << RADIO_CRCCNF_LEN_Pos) /*!< Bit mask of LEN field. */
+#define RADIO_CRCCNF_LEN_Disabled (0UL) /*!< CRC calculation disabled. */
+#define RADIO_CRCCNF_LEN_One (1UL) /*!< One byte long CRC. */
+#define RADIO_CRCCNF_LEN_Two (2UL) /*!< Two bytes long CRC. */
+#define RADIO_CRCCNF_LEN_Three (3UL) /*!< Three bytes long CRC. */
+
+/* Register: RADIO_CRCPOLY */
+/* Description: CRC polynomial. */
+
+/* Bits 23..0 : CRC polynomial. Decision point: START task. */
+#define RADIO_CRCPOLY_CRCPOLY_Pos (0UL) /*!< Position of CRCPOLY field. */
+#define RADIO_CRCPOLY_CRCPOLY_Msk (0xFFFFFFUL << RADIO_CRCPOLY_CRCPOLY_Pos) /*!< Bit mask of CRCPOLY field. */
+
+/* Register: RADIO_CRCINIT */
+/* Description: CRC initial value. */
+
+/* Bits 23..0 : Initial value for CRC calculation. Decision point: START task. */
+#define RADIO_CRCINIT_CRCINIT_Pos (0UL) /*!< Position of CRCINIT field. */
+#define RADIO_CRCINIT_CRCINIT_Msk (0xFFFFFFUL << RADIO_CRCINIT_CRCINIT_Pos) /*!< Bit mask of CRCINIT field. */
+
+/* Register: RADIO_TEST */
+/* Description: Test features enable register. */
+
+/* Bit 1 : PLL lock. Decision point: TXEN or RXEN task. */
+#define RADIO_TEST_PLLLOCK_Pos (1UL) /*!< Position of PLLLOCK field. */
+#define RADIO_TEST_PLLLOCK_Msk (0x1UL << RADIO_TEST_PLLLOCK_Pos) /*!< Bit mask of PLLLOCK field. */
+#define RADIO_TEST_PLLLOCK_Disabled (0UL) /*!< PLL lock disabled. */
+#define RADIO_TEST_PLLLOCK_Enabled (1UL) /*!< PLL lock enabled. */
+
+/* Bit 0 : Constant carrier. Decision point: TXEN task. */
+#define RADIO_TEST_CONSTCARRIER_Pos (0UL) /*!< Position of CONSTCARRIER field. */
+#define RADIO_TEST_CONSTCARRIER_Msk (0x1UL << RADIO_TEST_CONSTCARRIER_Pos) /*!< Bit mask of CONSTCARRIER field. */
+#define RADIO_TEST_CONSTCARRIER_Disabled (0UL) /*!< Constant carrier disabled. */
+#define RADIO_TEST_CONSTCARRIER_Enabled (1UL) /*!< Constant carrier enabled. */
+
+/* Register: RADIO_TIFS */
+/* Description: Inter Frame Spacing in microseconds. */
+
+/* Bits 7..0 : Inter frame spacing in microseconds. Decision point: START rask */
+#define RADIO_TIFS_TIFS_Pos (0UL) /*!< Position of TIFS field. */
+#define RADIO_TIFS_TIFS_Msk (0xFFUL << RADIO_TIFS_TIFS_Pos) /*!< Bit mask of TIFS field. */
+
+/* Register: RADIO_RSSISAMPLE */
+/* Description: RSSI sample. */
+
+/* Bits 6..0 : RSSI sample result. The result is read as a positive value so that ReceivedSignalStrength = -RSSISAMPLE dBm */
+#define RADIO_RSSISAMPLE_RSSISAMPLE_Pos (0UL) /*!< Position of RSSISAMPLE field. */
+#define RADIO_RSSISAMPLE_RSSISAMPLE_Msk (0x7FUL << RADIO_RSSISAMPLE_RSSISAMPLE_Pos) /*!< Bit mask of RSSISAMPLE field. */
+
+/* Register: RADIO_STATE */
+/* Description: Current radio state. */
+
+/* Bits 3..0 : Current radio state. */
+#define RADIO_STATE_STATE_Pos (0UL) /*!< Position of STATE field. */
+#define RADIO_STATE_STATE_Msk (0xFUL << RADIO_STATE_STATE_Pos) /*!< Bit mask of STATE field. */
+#define RADIO_STATE_STATE_Disabled (0x00UL) /*!< Radio is in the Disabled state. */
+#define RADIO_STATE_STATE_RxRu (0x01UL) /*!< Radio is in the Rx Ramp Up state. */
+#define RADIO_STATE_STATE_RxIdle (0x02UL) /*!< Radio is in the Rx Idle state. */
+#define RADIO_STATE_STATE_Rx (0x03UL) /*!< Radio is in the Rx state. */
+#define RADIO_STATE_STATE_RxDisable (0x04UL) /*!< Radio is in the Rx Disable state. */
+#define RADIO_STATE_STATE_TxRu (0x09UL) /*!< Radio is in the Tx Ramp Up state. */
+#define RADIO_STATE_STATE_TxIdle (0x0AUL) /*!< Radio is in the Tx Idle state. */
+#define RADIO_STATE_STATE_Tx (0x0BUL) /*!< Radio is in the Tx state. */
+#define RADIO_STATE_STATE_TxDisable (0x0CUL) /*!< Radio is in the Tx Disable state. */
+
+/* Register: RADIO_DATAWHITEIV */
+/* Description: Data whitening initial value. */
+
+/* Bits 6..0 : Data whitening initial value. Bit 0 corresponds to Position 0 of the LSFR, Bit 1 to position 5... Decision point: TXEN or RXEN task. */
+#define RADIO_DATAWHITEIV_DATAWHITEIV_Pos (0UL) /*!< Position of DATAWHITEIV field. */
+#define RADIO_DATAWHITEIV_DATAWHITEIV_Msk (0x7FUL << RADIO_DATAWHITEIV_DATAWHITEIV_Pos) /*!< Bit mask of DATAWHITEIV field. */
+
+/* Register: RADIO_DAP */
+/* Description: Device address prefix. */
+
+/* Bits 15..0 : Device address prefix. */
+#define RADIO_DAP_DAP_Pos (0UL) /*!< Position of DAP field. */
+#define RADIO_DAP_DAP_Msk (0xFFFFUL << RADIO_DAP_DAP_Pos) /*!< Bit mask of DAP field. */
+
+/* Register: RADIO_DACNF */
+/* Description: Device address match configuration. */
+
+/* Bit 15 : TxAdd for device address 7. */
+#define RADIO_DACNF_TXADD7_Pos (15UL) /*!< Position of TXADD7 field. */
+#define RADIO_DACNF_TXADD7_Msk (0x1UL << RADIO_DACNF_TXADD7_Pos) /*!< Bit mask of TXADD7 field. */
+
+/* Bit 14 : TxAdd for device address 6. */
+#define RADIO_DACNF_TXADD6_Pos (14UL) /*!< Position of TXADD6 field. */
+#define RADIO_DACNF_TXADD6_Msk (0x1UL << RADIO_DACNF_TXADD6_Pos) /*!< Bit mask of TXADD6 field. */
+
+/* Bit 13 : TxAdd for device address 5. */
+#define RADIO_DACNF_TXADD5_Pos (13UL) /*!< Position of TXADD5 field. */
+#define RADIO_DACNF_TXADD5_Msk (0x1UL << RADIO_DACNF_TXADD5_Pos) /*!< Bit mask of TXADD5 field. */
+
+/* Bit 12 : TxAdd for device address 4. */
+#define RADIO_DACNF_TXADD4_Pos (12UL) /*!< Position of TXADD4 field. */
+#define RADIO_DACNF_TXADD4_Msk (0x1UL << RADIO_DACNF_TXADD4_Pos) /*!< Bit mask of TXADD4 field. */
+
+/* Bit 11 : TxAdd for device address 3. */
+#define RADIO_DACNF_TXADD3_Pos (11UL) /*!< Position of TXADD3 field. */
+#define RADIO_DACNF_TXADD3_Msk (0x1UL << RADIO_DACNF_TXADD3_Pos) /*!< Bit mask of TXADD3 field. */
+
+/* Bit 10 : TxAdd for device address 2. */
+#define RADIO_DACNF_TXADD2_Pos (10UL) /*!< Position of TXADD2 field. */
+#define RADIO_DACNF_TXADD2_Msk (0x1UL << RADIO_DACNF_TXADD2_Pos) /*!< Bit mask of TXADD2 field. */
+
+/* Bit 9 : TxAdd for device address 1. */
+#define RADIO_DACNF_TXADD1_Pos (9UL) /*!< Position of TXADD1 field. */
+#define RADIO_DACNF_TXADD1_Msk (0x1UL << RADIO_DACNF_TXADD1_Pos) /*!< Bit mask of TXADD1 field. */
+
+/* Bit 8 : TxAdd for device address 0. */
+#define RADIO_DACNF_TXADD0_Pos (8UL) /*!< Position of TXADD0 field. */
+#define RADIO_DACNF_TXADD0_Msk (0x1UL << RADIO_DACNF_TXADD0_Pos) /*!< Bit mask of TXADD0 field. */
+
+/* Bit 7 : Enable or disable device address matching using device address 7. */
+#define RADIO_DACNF_ENA7_Pos (7UL) /*!< Position of ENA7 field. */
+#define RADIO_DACNF_ENA7_Msk (0x1UL << RADIO_DACNF_ENA7_Pos) /*!< Bit mask of ENA7 field. */
+#define RADIO_DACNF_ENA7_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA7_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 6 : Enable or disable device address matching using device address 6. */
+#define RADIO_DACNF_ENA6_Pos (6UL) /*!< Position of ENA6 field. */
+#define RADIO_DACNF_ENA6_Msk (0x1UL << RADIO_DACNF_ENA6_Pos) /*!< Bit mask of ENA6 field. */
+#define RADIO_DACNF_ENA6_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA6_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 5 : Enable or disable device address matching using device address 5. */
+#define RADIO_DACNF_ENA5_Pos (5UL) /*!< Position of ENA5 field. */
+#define RADIO_DACNF_ENA5_Msk (0x1UL << RADIO_DACNF_ENA5_Pos) /*!< Bit mask of ENA5 field. */
+#define RADIO_DACNF_ENA5_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA5_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 4 : Enable or disable device address matching using device address 4. */
+#define RADIO_DACNF_ENA4_Pos (4UL) /*!< Position of ENA4 field. */
+#define RADIO_DACNF_ENA4_Msk (0x1UL << RADIO_DACNF_ENA4_Pos) /*!< Bit mask of ENA4 field. */
+#define RADIO_DACNF_ENA4_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA4_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 3 : Enable or disable device address matching using device address 3. */
+#define RADIO_DACNF_ENA3_Pos (3UL) /*!< Position of ENA3 field. */
+#define RADIO_DACNF_ENA3_Msk (0x1UL << RADIO_DACNF_ENA3_Pos) /*!< Bit mask of ENA3 field. */
+#define RADIO_DACNF_ENA3_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA3_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 2 : Enable or disable device address matching using device address 2. */
+#define RADIO_DACNF_ENA2_Pos (2UL) /*!< Position of ENA2 field. */
+#define RADIO_DACNF_ENA2_Msk (0x1UL << RADIO_DACNF_ENA2_Pos) /*!< Bit mask of ENA2 field. */
+#define RADIO_DACNF_ENA2_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA2_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 1 : Enable or disable device address matching using device address 1. */
+#define RADIO_DACNF_ENA1_Pos (1UL) /*!< Position of ENA1 field. */
+#define RADIO_DACNF_ENA1_Msk (0x1UL << RADIO_DACNF_ENA1_Pos) /*!< Bit mask of ENA1 field. */
+#define RADIO_DACNF_ENA1_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA1_Enabled (1UL) /*!< Enabled. */
+
+/* Bit 0 : Enable or disable device address matching using device address 0. */
+#define RADIO_DACNF_ENA0_Pos (0UL) /*!< Position of ENA0 field. */
+#define RADIO_DACNF_ENA0_Msk (0x1UL << RADIO_DACNF_ENA0_Pos) /*!< Bit mask of ENA0 field. */
+#define RADIO_DACNF_ENA0_Disabled (0UL) /*!< Disabled. */
+#define RADIO_DACNF_ENA0_Enabled (1UL) /*!< Enabled. */
+
+/* Register: RADIO_OVERRIDE0 */
+/* Description: Trim value override register 0. */
+
+/* Bits 31..0 : Trim value override 0. */
+#define RADIO_OVERRIDE0_OVERRIDE0_Pos (0UL) /*!< Position of OVERRIDE0 field. */
+#define RADIO_OVERRIDE0_OVERRIDE0_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE0_OVERRIDE0_Pos) /*!< Bit mask of OVERRIDE0 field. */
+
+/* Register: RADIO_OVERRIDE1 */
+/* Description: Trim value override register 1. */
+
+/* Bits 31..0 : Trim value override 1. */
+#define RADIO_OVERRIDE1_OVERRIDE1_Pos (0UL) /*!< Position of OVERRIDE1 field. */
+#define RADIO_OVERRIDE1_OVERRIDE1_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE1_OVERRIDE1_Pos) /*!< Bit mask of OVERRIDE1 field. */
+
+/* Register: RADIO_OVERRIDE2 */
+/* Description: Trim value override register 2. */
+
+/* Bits 31..0 : Trim value override 2. */
+#define RADIO_OVERRIDE2_OVERRIDE2_Pos (0UL) /*!< Position of OVERRIDE2 field. */
+#define RADIO_OVERRIDE2_OVERRIDE2_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE2_OVERRIDE2_Pos) /*!< Bit mask of OVERRIDE2 field. */
+
+/* Register: RADIO_OVERRIDE3 */
+/* Description: Trim value override register 3. */
+
+/* Bits 31..0 : Trim value override 3. */
+#define RADIO_OVERRIDE3_OVERRIDE3_Pos (0UL) /*!< Position of OVERRIDE3 field. */
+#define RADIO_OVERRIDE3_OVERRIDE3_Msk (0xFFFFFFFFUL << RADIO_OVERRIDE3_OVERRIDE3_Pos) /*!< Bit mask of OVERRIDE3 field. */
+
+/* Register: RADIO_OVERRIDE4 */
+/* Description: Trim value override register 4. */
+
+/* Bit 31 : Enable or disable override of default trim values. */
+#define RADIO_OVERRIDE4_ENABLE_Pos (31UL) /*!< Position of ENABLE field. */
+#define RADIO_OVERRIDE4_ENABLE_Msk (0x1UL << RADIO_OVERRIDE4_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define RADIO_OVERRIDE4_ENABLE_Disabled (0UL) /*!< Override trim values disabled. */
+#define RADIO_OVERRIDE4_ENABLE_Enabled (1UL) /*!< Override trim values enabled. */
+
+/* Bits 27..0 : Trim value override 4. */
+#define RADIO_OVERRIDE4_OVERRIDE4_Pos (0UL) /*!< Position of OVERRIDE4 field. */
+#define RADIO_OVERRIDE4_OVERRIDE4_Msk (0xFFFFFFFUL << RADIO_OVERRIDE4_OVERRIDE4_Pos) /*!< Bit mask of OVERRIDE4 field. */
+
+/* Register: RADIO_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define RADIO_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RADIO_POWER_POWER_Msk (0x1UL << RADIO_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RADIO_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define RADIO_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: RNG */
+/* Description: Random Number Generator. */
+
+/* Register: RNG_SHORTS */
+/* Description: Shortcuts for the RNG. */
+
+/* Bit 0 : Shortcut between VALRDY event and STOP task. */
+#define RNG_SHORTS_VALRDY_STOP_Pos (0UL) /*!< Position of VALRDY_STOP field. */
+#define RNG_SHORTS_VALRDY_STOP_Msk (0x1UL << RNG_SHORTS_VALRDY_STOP_Pos) /*!< Bit mask of VALRDY_STOP field. */
+#define RNG_SHORTS_VALRDY_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define RNG_SHORTS_VALRDY_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: RNG_INTENSET */
+/* Description: Interrupt enable set register */
+
+/* Bit 0 : Enable interrupt on VALRDY event. */
+#define RNG_INTENSET_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
+#define RNG_INTENSET_VALRDY_Msk (0x1UL << RNG_INTENSET_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
+#define RNG_INTENSET_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RNG_INTENSET_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RNG_INTENSET_VALRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: RNG_INTENCLR */
+/* Description: Interrupt enable clear register */
+
+/* Bit 0 : Disable interrupt on VALRDY event. */
+#define RNG_INTENCLR_VALRDY_Pos (0UL) /*!< Position of VALRDY field. */
+#define RNG_INTENCLR_VALRDY_Msk (0x1UL << RNG_INTENCLR_VALRDY_Pos) /*!< Bit mask of VALRDY field. */
+#define RNG_INTENCLR_VALRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define RNG_INTENCLR_VALRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define RNG_INTENCLR_VALRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: RNG_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 0 : Digital error correction enable. */
+#define RNG_CONFIG_DERCEN_Pos (0UL) /*!< Position of DERCEN field. */
+#define RNG_CONFIG_DERCEN_Msk (0x1UL << RNG_CONFIG_DERCEN_Pos) /*!< Bit mask of DERCEN field. */
+#define RNG_CONFIG_DERCEN_Disabled (0UL) /*!< Digital error correction disabled. */
+#define RNG_CONFIG_DERCEN_Enabled (1UL) /*!< Digital error correction enabled. */
+
+/* Register: RNG_VALUE */
+/* Description: RNG random number. */
+
+/* Bits 7..0 : Generated random number. */
+#define RNG_VALUE_VALUE_Pos (0UL) /*!< Position of VALUE field. */
+#define RNG_VALUE_VALUE_Msk (0xFFUL << RNG_VALUE_VALUE_Pos) /*!< Bit mask of VALUE field. */
+
+/* Register: RNG_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define RNG_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RNG_POWER_POWER_Msk (0x1UL << RNG_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RNG_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define RNG_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: RTC */
+/* Description: Real time counter 0. */
+
+/* Register: RTC_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 19 : Enable interrupt on COMPARE[3] event. */
+#define RTC_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_INTENSET_COMPARE3_Msk (0x1UL << RTC_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 18 : Enable interrupt on COMPARE[2] event. */
+#define RTC_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_INTENSET_COMPARE2_Msk (0x1UL << RTC_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 17 : Enable interrupt on COMPARE[1] event. */
+#define RTC_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_INTENSET_COMPARE1_Msk (0x1UL << RTC_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 16 : Enable interrupt on COMPARE[0] event. */
+#define RTC_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_INTENSET_COMPARE0_Msk (0x1UL << RTC_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on OVRFLW event. */
+#define RTC_INTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_INTENSET_OVRFLW_Msk (0x1UL << RTC_INTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_INTENSET_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_OVRFLW_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on TICK event. */
+#define RTC_INTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_INTENSET_TICK_Msk (0x1UL << RTC_INTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_INTENSET_TICK_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENSET_TICK_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENSET_TICK_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: RTC_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 19 : Disable interrupt on COMPARE[3] event. */
+#define RTC_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_INTENCLR_COMPARE3_Msk (0x1UL << RTC_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 18 : Disable interrupt on COMPARE[2] event. */
+#define RTC_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_INTENCLR_COMPARE2_Msk (0x1UL << RTC_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 17 : Disable interrupt on COMPARE[1] event. */
+#define RTC_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_INTENCLR_COMPARE1_Msk (0x1UL << RTC_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 16 : Disable interrupt on COMPARE[0] event. */
+#define RTC_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_INTENCLR_COMPARE0_Msk (0x1UL << RTC_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on OVRFLW event. */
+#define RTC_INTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_INTENCLR_OVRFLW_Msk (0x1UL << RTC_INTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_INTENCLR_OVRFLW_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_OVRFLW_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_OVRFLW_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on TICK event. */
+#define RTC_INTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_INTENCLR_TICK_Msk (0x1UL << RTC_INTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_INTENCLR_TICK_Disabled (0UL) /*!< Interrupt disabled. */
+#define RTC_INTENCLR_TICK_Enabled (1UL) /*!< Interrupt enabled. */
+#define RTC_INTENCLR_TICK_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: RTC_EVTEN */
+/* Description: Configures event enable routing to PPI for each RTC event. */
+
+/* Bit 19 : COMPARE[3] event enable. */
+#define RTC_EVTEN_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTEN_COMPARE3_Msk (0x1UL << RTC_EVTEN_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTEN_COMPARE3_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE3_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 18 : COMPARE[2] event enable. */
+#define RTC_EVTEN_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTEN_COMPARE2_Msk (0x1UL << RTC_EVTEN_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTEN_COMPARE2_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE2_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 17 : COMPARE[1] event enable. */
+#define RTC_EVTEN_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTEN_COMPARE1_Msk (0x1UL << RTC_EVTEN_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTEN_COMPARE1_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE1_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 16 : COMPARE[0] event enable. */
+#define RTC_EVTEN_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTEN_COMPARE0_Msk (0x1UL << RTC_EVTEN_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTEN_COMPARE0_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_COMPARE0_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 1 : OVRFLW event enable. */
+#define RTC_EVTEN_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTEN_OVRFLW_Msk (0x1UL << RTC_EVTEN_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTEN_OVRFLW_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_OVRFLW_Enabled (1UL) /*!< Event enabled. */
+
+/* Bit 0 : TICK event enable. */
+#define RTC_EVTEN_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTEN_TICK_Msk (0x1UL << RTC_EVTEN_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTEN_TICK_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTEN_TICK_Enabled (1UL) /*!< Event enabled. */
+
+/* Register: RTC_EVTENSET */
+/* Description: Enable events routing to PPI. The reading of this register gives the value of EVTEN. */
+
+/* Bit 19 : Enable routing to PPI of COMPARE[3] event. */
+#define RTC_EVTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTENSET_COMPARE3_Msk (0x1UL << RTC_EVTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTENSET_COMPARE3_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE3_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE3_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 18 : Enable routing to PPI of COMPARE[2] event. */
+#define RTC_EVTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTENSET_COMPARE2_Msk (0x1UL << RTC_EVTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTENSET_COMPARE2_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE2_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE2_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 17 : Enable routing to PPI of COMPARE[1] event. */
+#define RTC_EVTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTENSET_COMPARE1_Msk (0x1UL << RTC_EVTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTENSET_COMPARE1_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE1_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE1_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 16 : Enable routing to PPI of COMPARE[0] event. */
+#define RTC_EVTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTENSET_COMPARE0_Msk (0x1UL << RTC_EVTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTENSET_COMPARE0_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_COMPARE0_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_COMPARE0_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 1 : Enable routing to PPI of OVRFLW event. */
+#define RTC_EVTENSET_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTENSET_OVRFLW_Msk (0x1UL << RTC_EVTENSET_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTENSET_OVRFLW_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_OVRFLW_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_OVRFLW_Set (1UL) /*!< Enable event on write. */
+
+/* Bit 0 : Enable routing to PPI of TICK event. */
+#define RTC_EVTENSET_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTENSET_TICK_Msk (0x1UL << RTC_EVTENSET_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTENSET_TICK_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENSET_TICK_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENSET_TICK_Set (1UL) /*!< Enable event on write. */
+
+/* Register: RTC_EVTENCLR */
+/* Description: Disable events routing to PPI. The reading of this register gives the value of EVTEN. */
+
+/* Bit 19 : Disable routing to PPI of COMPARE[3] event. */
+#define RTC_EVTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define RTC_EVTENCLR_COMPARE3_Msk (0x1UL << RTC_EVTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define RTC_EVTENCLR_COMPARE3_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE3_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE3_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 18 : Disable routing to PPI of COMPARE[2] event. */
+#define RTC_EVTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define RTC_EVTENCLR_COMPARE2_Msk (0x1UL << RTC_EVTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define RTC_EVTENCLR_COMPARE2_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE2_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE2_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 17 : Disable routing to PPI of COMPARE[1] event. */
+#define RTC_EVTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define RTC_EVTENCLR_COMPARE1_Msk (0x1UL << RTC_EVTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define RTC_EVTENCLR_COMPARE1_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE1_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE1_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 16 : Disable routing to PPI of COMPARE[0] event. */
+#define RTC_EVTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define RTC_EVTENCLR_COMPARE0_Msk (0x1UL << RTC_EVTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define RTC_EVTENCLR_COMPARE0_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_COMPARE0_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_COMPARE0_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 1 : Disable routing to PPI of OVRFLW event. */
+#define RTC_EVTENCLR_OVRFLW_Pos (1UL) /*!< Position of OVRFLW field. */
+#define RTC_EVTENCLR_OVRFLW_Msk (0x1UL << RTC_EVTENCLR_OVRFLW_Pos) /*!< Bit mask of OVRFLW field. */
+#define RTC_EVTENCLR_OVRFLW_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_OVRFLW_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_OVRFLW_Clear (1UL) /*!< Disable event on write. */
+
+/* Bit 0 : Disable routing to PPI of TICK event. */
+#define RTC_EVTENCLR_TICK_Pos (0UL) /*!< Position of TICK field. */
+#define RTC_EVTENCLR_TICK_Msk (0x1UL << RTC_EVTENCLR_TICK_Pos) /*!< Bit mask of TICK field. */
+#define RTC_EVTENCLR_TICK_Disabled (0UL) /*!< Event disabled. */
+#define RTC_EVTENCLR_TICK_Enabled (1UL) /*!< Event enabled. */
+#define RTC_EVTENCLR_TICK_Clear (1UL) /*!< Disable event on write. */
+
+/* Register: RTC_COUNTER */
+/* Description: Current COUNTER value. */
+
+/* Bits 23..0 : Counter value. */
+#define RTC_COUNTER_COUNTER_Pos (0UL) /*!< Position of COUNTER field. */
+#define RTC_COUNTER_COUNTER_Msk (0xFFFFFFUL << RTC_COUNTER_COUNTER_Pos) /*!< Bit mask of COUNTER field. */
+
+/* Register: RTC_PRESCALER */
+/* Description: 12-bit prescaler for COUNTER frequency (32768/(PRESCALER+1)). Must be written when RTC is STOPed. */
+
+/* Bits 11..0 : RTC PRESCALER value. */
+#define RTC_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define RTC_PRESCALER_PRESCALER_Msk (0xFFFUL << RTC_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+
+/* Register: RTC_CC */
+/* Description: Capture/compare registers. */
+
+/* Bits 23..0 : Compare value. */
+#define RTC_CC_COMPARE_Pos (0UL) /*!< Position of COMPARE field. */
+#define RTC_CC_COMPARE_Msk (0xFFFFFFUL << RTC_CC_COMPARE_Pos) /*!< Bit mask of COMPARE field. */
+
+/* Register: RTC_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define RTC_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define RTC_POWER_POWER_Msk (0x1UL << RTC_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define RTC_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define RTC_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: SPI */
+/* Description: SPI master 0. */
+
+/* Register: SPI_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 2 : Enable interrupt on READY event. */
+#define SPI_INTENSET_READY_Pos (2UL) /*!< Position of READY field. */
+#define SPI_INTENSET_READY_Msk (0x1UL << SPI_INTENSET_READY_Pos) /*!< Bit mask of READY field. */
+#define SPI_INTENSET_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPI_INTENSET_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPI_INTENSET_READY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: SPI_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 2 : Disable interrupt on READY event. */
+#define SPI_INTENCLR_READY_Pos (2UL) /*!< Position of READY field. */
+#define SPI_INTENCLR_READY_Msk (0x1UL << SPI_INTENCLR_READY_Pos) /*!< Bit mask of READY field. */
+#define SPI_INTENCLR_READY_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPI_INTENCLR_READY_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPI_INTENCLR_READY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: SPI_ENABLE */
+/* Description: Enable SPI. */
+
+/* Bits 2..0 : Enable or disable SPI. */
+#define SPI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPI_ENABLE_ENABLE_Msk (0x7UL << SPI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPI. */
+#define SPI_ENABLE_ENABLE_Enabled (0x01UL) /*!< Enable SPI. */
+
+/* Register: SPI_RXD */
+/* Description: RX data. */
+
+/* Bits 7..0 : RX data from last transfer. */
+#define SPI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define SPI_RXD_RXD_Msk (0xFFUL << SPI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: SPI_TXD */
+/* Description: TX data. */
+
+/* Bits 7..0 : TX data for next transfer. */
+#define SPI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define SPI_TXD_TXD_Msk (0xFFUL << SPI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: SPI_FREQUENCY */
+/* Description: SPI frequency */
+
+/* Bits 31..0 : SPI data rate. */
+#define SPI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define SPI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << SPI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define SPI_FREQUENCY_FREQUENCY_K125 (0x02000000UL) /*!< 125kbps. */
+#define SPI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250kbps. */
+#define SPI_FREQUENCY_FREQUENCY_K500 (0x08000000UL) /*!< 500kbps. */
+#define SPI_FREQUENCY_FREQUENCY_M1 (0x10000000UL) /*!< 1Mbps. */
+#define SPI_FREQUENCY_FREQUENCY_M2 (0x20000000UL) /*!< 2Mbps. */
+#define SPI_FREQUENCY_FREQUENCY_M4 (0x40000000UL) /*!< 4Mbps. */
+#define SPI_FREQUENCY_FREQUENCY_M8 (0x80000000UL) /*!< 8Mbps. */
+
+/* Register: SPI_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 2 : Serial clock (SCK) polarity. */
+#define SPI_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPI_CONFIG_CPOL_Msk (0x1UL << SPI_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPI_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
+#define SPI_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
+
+/* Bit 1 : Serial clock (SCK) phase. */
+#define SPI_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPI_CONFIG_CPHA_Msk (0x1UL << SPI_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPI_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
+#define SPI_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
+
+/* Bit 0 : Bit order. */
+#define SPI_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPI_CONFIG_ORDER_Msk (0x1UL << SPI_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPI_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
+#define SPI_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
+
+/* Register: SPI_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define SPI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define SPI_POWER_POWER_Msk (0x1UL << SPI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define SPI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define SPI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: SPIS */
+/* Description: SPI slave 1. */
+
+/* Register: SPIS_SHORTS */
+/* Description: Shortcuts for SPIS. */
+
+/* Bit 2 : Shortcut between END event and the ACQUIRE task. */
+#define SPIS_SHORTS_END_ACQUIRE_Pos (2UL) /*!< Position of END_ACQUIRE field. */
+#define SPIS_SHORTS_END_ACQUIRE_Msk (0x1UL << SPIS_SHORTS_END_ACQUIRE_Pos) /*!< Bit mask of END_ACQUIRE field. */
+#define SPIS_SHORTS_END_ACQUIRE_Disabled (0UL) /*!< Shortcut disabled. */
+#define SPIS_SHORTS_END_ACQUIRE_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: SPIS_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 10 : Enable interrupt on ACQUIRED event. */
+#define SPIS_INTENSET_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
+#define SPIS_INTENSET_ACQUIRED_Msk (0x1UL << SPIS_INTENSET_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
+#define SPIS_INTENSET_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENSET_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENSET_ACQUIRED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on END event. */
+#define SPIS_INTENSET_END_Pos (1UL) /*!< Position of END field. */
+#define SPIS_INTENSET_END_Msk (0x1UL << SPIS_INTENSET_END_Pos) /*!< Bit mask of END field. */
+#define SPIS_INTENSET_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENSET_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENSET_END_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: SPIS_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 10 : Disable interrupt on ACQUIRED event. */
+#define SPIS_INTENCLR_ACQUIRED_Pos (10UL) /*!< Position of ACQUIRED field. */
+#define SPIS_INTENCLR_ACQUIRED_Msk (0x1UL << SPIS_INTENCLR_ACQUIRED_Pos) /*!< Bit mask of ACQUIRED field. */
+#define SPIS_INTENCLR_ACQUIRED_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENCLR_ACQUIRED_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENCLR_ACQUIRED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on END event. */
+#define SPIS_INTENCLR_END_Pos (1UL) /*!< Position of END field. */
+#define SPIS_INTENCLR_END_Msk (0x1UL << SPIS_INTENCLR_END_Pos) /*!< Bit mask of END field. */
+#define SPIS_INTENCLR_END_Disabled (0UL) /*!< Interrupt disabled. */
+#define SPIS_INTENCLR_END_Enabled (1UL) /*!< Interrupt enabled. */
+#define SPIS_INTENCLR_END_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: SPIS_SEMSTAT */
+/* Description: Semaphore status. */
+
+/* Bits 1..0 : Semaphore status. */
+#define SPIS_SEMSTAT_SEMSTAT_Pos (0UL) /*!< Position of SEMSTAT field. */
+#define SPIS_SEMSTAT_SEMSTAT_Msk (0x3UL << SPIS_SEMSTAT_SEMSTAT_Pos) /*!< Bit mask of SEMSTAT field. */
+#define SPIS_SEMSTAT_SEMSTAT_Free (0x00UL) /*!< Semaphore is free. */
+#define SPIS_SEMSTAT_SEMSTAT_CPU (0x01UL) /*!< Semaphore is assigned to the CPU. */
+#define SPIS_SEMSTAT_SEMSTAT_SPIS (0x02UL) /*!< Semaphore is assigned to the SPIS. */
+#define SPIS_SEMSTAT_SEMSTAT_CPUPending (0x03UL) /*!< Semaphore is assigned to the SPIS, but a handover to the CPU is pending. */
+
+/* Register: SPIS_STATUS */
+/* Description: Status from last transaction. */
+
+/* Bit 1 : RX buffer overflow detected, and prevented. */
+#define SPIS_STATUS_OVERFLOW_Pos (1UL) /*!< Position of OVERFLOW field. */
+#define SPIS_STATUS_OVERFLOW_Msk (0x1UL << SPIS_STATUS_OVERFLOW_Pos) /*!< Bit mask of OVERFLOW field. */
+#define SPIS_STATUS_OVERFLOW_NotPresent (0UL) /*!< Error not present. */
+#define SPIS_STATUS_OVERFLOW_Present (1UL) /*!< Error present. */
+#define SPIS_STATUS_OVERFLOW_Clear (1UL) /*!< Clear on write. */
+
+/* Bit 0 : TX buffer overread detected, and prevented. */
+#define SPIS_STATUS_OVERREAD_Pos (0UL) /*!< Position of OVERREAD field. */
+#define SPIS_STATUS_OVERREAD_Msk (0x1UL << SPIS_STATUS_OVERREAD_Pos) /*!< Bit mask of OVERREAD field. */
+#define SPIS_STATUS_OVERREAD_NotPresent (0UL) /*!< Error not present. */
+#define SPIS_STATUS_OVERREAD_Present (1UL) /*!< Error present. */
+#define SPIS_STATUS_OVERREAD_Clear (1UL) /*!< Clear on write. */
+
+/* Register: SPIS_ENABLE */
+/* Description: Enable SPIS. */
+
+/* Bits 2..0 : Enable or disable SPIS. */
+#define SPIS_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define SPIS_ENABLE_ENABLE_Msk (0x7UL << SPIS_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define SPIS_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled SPIS. */
+#define SPIS_ENABLE_ENABLE_Enabled (0x02UL) /*!< Enable SPIS. */
+
+/* Register: SPIS_MAXRX */
+/* Description: Maximum number of bytes in the receive buffer. */
+
+/* Bits 7..0 : Maximum number of bytes in the receive buffer. */
+#define SPIS_MAXRX_MAXRX_Pos (0UL) /*!< Position of MAXRX field. */
+#define SPIS_MAXRX_MAXRX_Msk (0xFFUL << SPIS_MAXRX_MAXRX_Pos) /*!< Bit mask of MAXRX field. */
+
+/* Register: SPIS_AMOUNTRX */
+/* Description: Number of bytes received in last granted transaction. */
+
+/* Bits 7..0 : Number of bytes received in last granted transaction. */
+#define SPIS_AMOUNTRX_AMOUNTRX_Pos (0UL) /*!< Position of AMOUNTRX field. */
+#define SPIS_AMOUNTRX_AMOUNTRX_Msk (0xFFUL << SPIS_AMOUNTRX_AMOUNTRX_Pos) /*!< Bit mask of AMOUNTRX field. */
+
+/* Register: SPIS_MAXTX */
+/* Description: Maximum number of bytes in the transmit buffer. */
+
+/* Bits 7..0 : Maximum number of bytes in the transmit buffer. */
+#define SPIS_MAXTX_MAXTX_Pos (0UL) /*!< Position of MAXTX field. */
+#define SPIS_MAXTX_MAXTX_Msk (0xFFUL << SPIS_MAXTX_MAXTX_Pos) /*!< Bit mask of MAXTX field. */
+
+/* Register: SPIS_AMOUNTTX */
+/* Description: Number of bytes transmitted in last granted transaction. */
+
+/* Bits 7..0 : Number of bytes transmitted in last granted transaction. */
+#define SPIS_AMOUNTTX_AMOUNTTX_Pos (0UL) /*!< Position of AMOUNTTX field. */
+#define SPIS_AMOUNTTX_AMOUNTTX_Msk (0xFFUL << SPIS_AMOUNTTX_AMOUNTTX_Pos) /*!< Bit mask of AMOUNTTX field. */
+
+/* Register: SPIS_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 2 : Serial clock (SCK) polarity. */
+#define SPIS_CONFIG_CPOL_Pos (2UL) /*!< Position of CPOL field. */
+#define SPIS_CONFIG_CPOL_Msk (0x1UL << SPIS_CONFIG_CPOL_Pos) /*!< Bit mask of CPOL field. */
+#define SPIS_CONFIG_CPOL_ActiveHigh (0UL) /*!< Active high. */
+#define SPIS_CONFIG_CPOL_ActiveLow (1UL) /*!< Active low. */
+
+/* Bit 1 : Serial clock (SCK) phase. */
+#define SPIS_CONFIG_CPHA_Pos (1UL) /*!< Position of CPHA field. */
+#define SPIS_CONFIG_CPHA_Msk (0x1UL << SPIS_CONFIG_CPHA_Pos) /*!< Bit mask of CPHA field. */
+#define SPIS_CONFIG_CPHA_Leading (0UL) /*!< Sample on leading edge of the clock. Shift serial data on trailing edge. */
+#define SPIS_CONFIG_CPHA_Trailing (1UL) /*!< Sample on trailing edge of the clock. Shift serial data on leading edge. */
+
+/* Bit 0 : Bit order. */
+#define SPIS_CONFIG_ORDER_Pos (0UL) /*!< Position of ORDER field. */
+#define SPIS_CONFIG_ORDER_Msk (0x1UL << SPIS_CONFIG_ORDER_Pos) /*!< Bit mask of ORDER field. */
+#define SPIS_CONFIG_ORDER_MsbFirst (0UL) /*!< Most significant bit transmitted out first. */
+#define SPIS_CONFIG_ORDER_LsbFirst (1UL) /*!< Least significant bit transmitted out first. */
+
+/* Register: SPIS_DEF */
+/* Description: Default character. */
+
+/* Bits 7..0 : Default character. */
+#define SPIS_DEF_DEF_Pos (0UL) /*!< Position of DEF field. */
+#define SPIS_DEF_DEF_Msk (0xFFUL << SPIS_DEF_DEF_Pos) /*!< Bit mask of DEF field. */
+
+/* Register: SPIS_ORC */
+/* Description: Over-read character. */
+
+/* Bits 7..0 : Over-read character. */
+#define SPIS_ORC_ORC_Pos (0UL) /*!< Position of ORC field. */
+#define SPIS_ORC_ORC_Msk (0xFFUL << SPIS_ORC_ORC_Pos) /*!< Bit mask of ORC field. */
+
+/* Register: SPIS_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define SPIS_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define SPIS_POWER_POWER_Msk (0x1UL << SPIS_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define SPIS_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define SPIS_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: TEMP */
+/* Description: Temperature Sensor. */
+
+/* Register: TEMP_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 0 : Enable interrupt on DATARDY event. */
+#define TEMP_INTENSET_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
+#define TEMP_INTENSET_DATARDY_Msk (0x1UL << TEMP_INTENSET_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
+#define TEMP_INTENSET_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TEMP_INTENSET_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TEMP_INTENSET_DATARDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: TEMP_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 0 : Disable interrupt on DATARDY event. */
+#define TEMP_INTENCLR_DATARDY_Pos (0UL) /*!< Position of DATARDY field. */
+#define TEMP_INTENCLR_DATARDY_Msk (0x1UL << TEMP_INTENCLR_DATARDY_Pos) /*!< Bit mask of DATARDY field. */
+#define TEMP_INTENCLR_DATARDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TEMP_INTENCLR_DATARDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TEMP_INTENCLR_DATARDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: TEMP_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define TEMP_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define TEMP_POWER_POWER_Msk (0x1UL << TEMP_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define TEMP_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define TEMP_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: TIMER */
+/* Description: Timer 0. */
+
+/* Register: TIMER_SHORTS */
+/* Description: Shortcuts for Timer. */
+
+/* Bit 11 : Shortcut between CC[3] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE3_STOP_Pos (11UL) /*!< Position of COMPARE3_STOP field. */
+#define TIMER_SHORTS_COMPARE3_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE3_STOP_Pos) /*!< Bit mask of COMPARE3_STOP field. */
+#define TIMER_SHORTS_COMPARE3_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE3_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 10 : Shortcut between CC[2] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE2_STOP_Pos (10UL) /*!< Position of COMPARE2_STOP field. */
+#define TIMER_SHORTS_COMPARE2_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE2_STOP_Pos) /*!< Bit mask of COMPARE2_STOP field. */
+#define TIMER_SHORTS_COMPARE2_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE2_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 9 : Shortcut between CC[1] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE1_STOP_Pos (9UL) /*!< Position of COMPARE1_STOP field. */
+#define TIMER_SHORTS_COMPARE1_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE1_STOP_Pos) /*!< Bit mask of COMPARE1_STOP field. */
+#define TIMER_SHORTS_COMPARE1_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE1_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 8 : Shortcut between CC[0] event and the STOP task. */
+#define TIMER_SHORTS_COMPARE0_STOP_Pos (8UL) /*!< Position of COMPARE0_STOP field. */
+#define TIMER_SHORTS_COMPARE0_STOP_Msk (0x1UL << TIMER_SHORTS_COMPARE0_STOP_Pos) /*!< Bit mask of COMPARE0_STOP field. */
+#define TIMER_SHORTS_COMPARE0_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE0_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between CC[3] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Pos (3UL) /*!< Position of COMPARE3_CLEAR field. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE3_CLEAR_Pos) /*!< Bit mask of COMPARE3_CLEAR field. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE3_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 2 : Shortcut between CC[2] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Pos (2UL) /*!< Position of COMPARE2_CLEAR field. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE2_CLEAR_Pos) /*!< Bit mask of COMPARE2_CLEAR field. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE2_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 1 : Shortcut between CC[1] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Pos (1UL) /*!< Position of COMPARE1_CLEAR field. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE1_CLEAR_Pos) /*!< Bit mask of COMPARE1_CLEAR field. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE1_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between CC[0] event and the CLEAR task. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Pos (0UL) /*!< Position of COMPARE0_CLEAR field. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Msk (0x1UL << TIMER_SHORTS_COMPARE0_CLEAR_Pos) /*!< Bit mask of COMPARE0_CLEAR field. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Disabled (0UL) /*!< Shortcut disabled. */
+#define TIMER_SHORTS_COMPARE0_CLEAR_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: TIMER_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 19 : Enable interrupt on COMPARE[3] */
+#define TIMER_INTENSET_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define TIMER_INTENSET_COMPARE3_Msk (0x1UL << TIMER_INTENSET_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define TIMER_INTENSET_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE3_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 18 : Enable interrupt on COMPARE[2] */
+#define TIMER_INTENSET_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define TIMER_INTENSET_COMPARE2_Msk (0x1UL << TIMER_INTENSET_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define TIMER_INTENSET_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE2_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 17 : Enable interrupt on COMPARE[1] */
+#define TIMER_INTENSET_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define TIMER_INTENSET_COMPARE1_Msk (0x1UL << TIMER_INTENSET_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define TIMER_INTENSET_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE1_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 16 : Enable interrupt on COMPARE[0] */
+#define TIMER_INTENSET_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define TIMER_INTENSET_COMPARE0_Msk (0x1UL << TIMER_INTENSET_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define TIMER_INTENSET_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENSET_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENSET_COMPARE0_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: TIMER_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 19 : Disable interrupt on COMPARE[3] */
+#define TIMER_INTENCLR_COMPARE3_Pos (19UL) /*!< Position of COMPARE3 field. */
+#define TIMER_INTENCLR_COMPARE3_Msk (0x1UL << TIMER_INTENCLR_COMPARE3_Pos) /*!< Bit mask of COMPARE3 field. */
+#define TIMER_INTENCLR_COMPARE3_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE3_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE3_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 18 : Disable interrupt on COMPARE[2] */
+#define TIMER_INTENCLR_COMPARE2_Pos (18UL) /*!< Position of COMPARE2 field. */
+#define TIMER_INTENCLR_COMPARE2_Msk (0x1UL << TIMER_INTENCLR_COMPARE2_Pos) /*!< Bit mask of COMPARE2 field. */
+#define TIMER_INTENCLR_COMPARE2_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE2_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE2_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 17 : Disable interrupt on COMPARE[1] */
+#define TIMER_INTENCLR_COMPARE1_Pos (17UL) /*!< Position of COMPARE1 field. */
+#define TIMER_INTENCLR_COMPARE1_Msk (0x1UL << TIMER_INTENCLR_COMPARE1_Pos) /*!< Bit mask of COMPARE1 field. */
+#define TIMER_INTENCLR_COMPARE1_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE1_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE1_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 16 : Disable interrupt on COMPARE[0] */
+#define TIMER_INTENCLR_COMPARE0_Pos (16UL) /*!< Position of COMPARE0 field. */
+#define TIMER_INTENCLR_COMPARE0_Msk (0x1UL << TIMER_INTENCLR_COMPARE0_Pos) /*!< Bit mask of COMPARE0 field. */
+#define TIMER_INTENCLR_COMPARE0_Disabled (0UL) /*!< Interrupt disabled. */
+#define TIMER_INTENCLR_COMPARE0_Enabled (1UL) /*!< Interrupt enabled. */
+#define TIMER_INTENCLR_COMPARE0_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: TIMER_MODE */
+/* Description: Timer Mode selection. */
+
+/* Bit 0 : Select Normal or Counter mode. */
+#define TIMER_MODE_MODE_Pos (0UL) /*!< Position of MODE field. */
+#define TIMER_MODE_MODE_Msk (0x1UL << TIMER_MODE_MODE_Pos) /*!< Bit mask of MODE field. */
+#define TIMER_MODE_MODE_Timer (0UL) /*!< Timer in Normal mode. */
+#define TIMER_MODE_MODE_Counter (1UL) /*!< Timer in Counter mode. */
+
+/* Register: TIMER_BITMODE */
+/* Description: Sets timer behaviour. */
+
+/* Bits 1..0 : Sets timer behaviour ro be like the implementation of a timer with width as indicated. */
+#define TIMER_BITMODE_BITMODE_Pos (0UL) /*!< Position of BITMODE field. */
+#define TIMER_BITMODE_BITMODE_Msk (0x3UL << TIMER_BITMODE_BITMODE_Pos) /*!< Bit mask of BITMODE field. */
+#define TIMER_BITMODE_BITMODE_16Bit (0x00UL) /*!< 16-bit timer behaviour. */
+#define TIMER_BITMODE_BITMODE_08Bit (0x01UL) /*!< 8-bit timer behaviour. */
+#define TIMER_BITMODE_BITMODE_24Bit (0x02UL) /*!< 24-bit timer behaviour. */
+#define TIMER_BITMODE_BITMODE_32Bit (0x03UL) /*!< 32-bit timer behaviour. */
+
+/* Register: TIMER_PRESCALER */
+/* Description: 4-bit prescaler to source clock frequency (max value 9). Source clock frequency is divided by 2^SCALE. */
+
+/* Bits 3..0 : Timer PRESCALER value. Max value is 9. */
+#define TIMER_PRESCALER_PRESCALER_Pos (0UL) /*!< Position of PRESCALER field. */
+#define TIMER_PRESCALER_PRESCALER_Msk (0xFUL << TIMER_PRESCALER_PRESCALER_Pos) /*!< Bit mask of PRESCALER field. */
+
+/* Register: TIMER_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define TIMER_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define TIMER_POWER_POWER_Msk (0x1UL << TIMER_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define TIMER_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define TIMER_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: TWI */
+/* Description: Two-wire interface master 0. */
+
+/* Register: TWI_SHORTS */
+/* Description: Shortcuts for TWI. */
+
+/* Bit 1 : Shortcut between BB event and the STOP task. */
+#define TWI_SHORTS_BB_STOP_Pos (1UL) /*!< Position of BB_STOP field. */
+#define TWI_SHORTS_BB_STOP_Msk (0x1UL << TWI_SHORTS_BB_STOP_Pos) /*!< Bit mask of BB_STOP field. */
+#define TWI_SHORTS_BB_STOP_Disabled (0UL) /*!< Shortcut disabled. */
+#define TWI_SHORTS_BB_STOP_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 0 : Shortcut between BB event and the SUSPEND task. */
+#define TWI_SHORTS_BB_SUSPEND_Pos (0UL) /*!< Position of BB_SUSPEND field. */
+#define TWI_SHORTS_BB_SUSPEND_Msk (0x1UL << TWI_SHORTS_BB_SUSPEND_Pos) /*!< Bit mask of BB_SUSPEND field. */
+#define TWI_SHORTS_BB_SUSPEND_Disabled (0UL) /*!< Shortcut disabled. */
+#define TWI_SHORTS_BB_SUSPEND_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: TWI_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 18 : Enable interrupt on SUSPENDED event. */
+#define TWI_INTENSET_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWI_INTENSET_SUSPENDED_Msk (0x1UL << TWI_INTENSET_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWI_INTENSET_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_SUSPENDED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 14 : Enable interrupt on BB event. */
+#define TWI_INTENSET_BB_Pos (14UL) /*!< Position of BB field. */
+#define TWI_INTENSET_BB_Msk (0x1UL << TWI_INTENSET_BB_Pos) /*!< Bit mask of BB field. */
+#define TWI_INTENSET_BB_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_BB_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_BB_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 9 : Enable interrupt on ERROR event. */
+#define TWI_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWI_INTENSET_ERROR_Msk (0x1UL << TWI_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWI_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 7 : Enable interrupt on TXDSENT event. */
+#define TWI_INTENSET_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */
+#define TWI_INTENSET_TXDSENT_Msk (0x1UL << TWI_INTENSET_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */
+#define TWI_INTENSET_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_TXDSENT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on READY event. */
+#define TWI_INTENSET_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */
+#define TWI_INTENSET_RXDREADY_Msk (0x1UL << TWI_INTENSET_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */
+#define TWI_INTENSET_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_RXDREADY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on STOPPED event. */
+#define TWI_INTENSET_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWI_INTENSET_STOPPED_Msk (0x1UL << TWI_INTENSET_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWI_INTENSET_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENSET_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENSET_STOPPED_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: TWI_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 18 : Disable interrupt on SUSPENDED event. */
+#define TWI_INTENCLR_SUSPENDED_Pos (18UL) /*!< Position of SUSPENDED field. */
+#define TWI_INTENCLR_SUSPENDED_Msk (0x1UL << TWI_INTENCLR_SUSPENDED_Pos) /*!< Bit mask of SUSPENDED field. */
+#define TWI_INTENCLR_SUSPENDED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_SUSPENDED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_SUSPENDED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 14 : Disable interrupt on BB event. */
+#define TWI_INTENCLR_BB_Pos (14UL) /*!< Position of BB field. */
+#define TWI_INTENCLR_BB_Msk (0x1UL << TWI_INTENCLR_BB_Pos) /*!< Bit mask of BB field. */
+#define TWI_INTENCLR_BB_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_BB_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_BB_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 9 : Disable interrupt on ERROR event. */
+#define TWI_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define TWI_INTENCLR_ERROR_Msk (0x1UL << TWI_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define TWI_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 7 : Disable interrupt on TXDSENT event. */
+#define TWI_INTENCLR_TXDSENT_Pos (7UL) /*!< Position of TXDSENT field. */
+#define TWI_INTENCLR_TXDSENT_Msk (0x1UL << TWI_INTENCLR_TXDSENT_Pos) /*!< Bit mask of TXDSENT field. */
+#define TWI_INTENCLR_TXDSENT_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_TXDSENT_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_TXDSENT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on RXDREADY event. */
+#define TWI_INTENCLR_RXDREADY_Pos (2UL) /*!< Position of RXDREADY field. */
+#define TWI_INTENCLR_RXDREADY_Msk (0x1UL << TWI_INTENCLR_RXDREADY_Pos) /*!< Bit mask of RXDREADY field. */
+#define TWI_INTENCLR_RXDREADY_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_RXDREADY_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_RXDREADY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on STOPPED event. */
+#define TWI_INTENCLR_STOPPED_Pos (1UL) /*!< Position of STOPPED field. */
+#define TWI_INTENCLR_STOPPED_Msk (0x1UL << TWI_INTENCLR_STOPPED_Pos) /*!< Bit mask of STOPPED field. */
+#define TWI_INTENCLR_STOPPED_Disabled (0UL) /*!< Interrupt disabled. */
+#define TWI_INTENCLR_STOPPED_Enabled (1UL) /*!< Interrupt enabled. */
+#define TWI_INTENCLR_STOPPED_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: TWI_ERRORSRC */
+/* Description: Two-wire error source. Write error field to 1 to clear error. */
+
+/* Bit 2 : NACK received after sending a data byte. */
+#define TWI_ERRORSRC_DNACK_Pos (2UL) /*!< Position of DNACK field. */
+#define TWI_ERRORSRC_DNACK_Msk (0x1UL << TWI_ERRORSRC_DNACK_Pos) /*!< Bit mask of DNACK field. */
+#define TWI_ERRORSRC_DNACK_NotPresent (0UL) /*!< Error not present. */
+#define TWI_ERRORSRC_DNACK_Present (1UL) /*!< Error present. */
+#define TWI_ERRORSRC_DNACK_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 1 : NACK received after sending the address. */
+#define TWI_ERRORSRC_ANACK_Pos (1UL) /*!< Position of ANACK field. */
+#define TWI_ERRORSRC_ANACK_Msk (0x1UL << TWI_ERRORSRC_ANACK_Pos) /*!< Bit mask of ANACK field. */
+#define TWI_ERRORSRC_ANACK_NotPresent (0UL) /*!< Error not present. */
+#define TWI_ERRORSRC_ANACK_Present (1UL) /*!< Error present. */
+#define TWI_ERRORSRC_ANACK_Clear (1UL) /*!< Clear error on write. */
+
+/* Register: TWI_ENABLE */
+/* Description: Enable two-wire master. */
+
+/* Bits 2..0 : Enable or disable W2M */
+#define TWI_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define TWI_ENABLE_ENABLE_Msk (0x7UL << TWI_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define TWI_ENABLE_ENABLE_Disabled (0x00UL) /*!< Disabled. */
+#define TWI_ENABLE_ENABLE_Enabled (0x05UL) /*!< Enabled. */
+
+/* Register: TWI_RXD */
+/* Description: RX data register. */
+
+/* Bits 7..0 : RX data from last transfer. */
+#define TWI_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define TWI_RXD_RXD_Msk (0xFFUL << TWI_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: TWI_TXD */
+/* Description: TX data register. */
+
+/* Bits 7..0 : TX data for next transfer. */
+#define TWI_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define TWI_TXD_TXD_Msk (0xFFUL << TWI_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: TWI_FREQUENCY */
+/* Description: Two-wire frequency. */
+
+/* Bits 31..0 : Two-wire master clock frequency. */
+#define TWI_FREQUENCY_FREQUENCY_Pos (0UL) /*!< Position of FREQUENCY field. */
+#define TWI_FREQUENCY_FREQUENCY_Msk (0xFFFFFFFFUL << TWI_FREQUENCY_FREQUENCY_Pos) /*!< Bit mask of FREQUENCY field. */
+#define TWI_FREQUENCY_FREQUENCY_K100 (0x01980000UL) /*!< 100 kbps. */
+#define TWI_FREQUENCY_FREQUENCY_K250 (0x04000000UL) /*!< 250 kbps. */
+#define TWI_FREQUENCY_FREQUENCY_K400 (0x06680000UL) /*!< 400 kbps. */
+
+/* Register: TWI_ADDRESS */
+/* Description: Address used in the two-wire transfer. */
+
+/* Bits 6..0 : Two-wire address. */
+#define TWI_ADDRESS_ADDRESS_Pos (0UL) /*!< Position of ADDRESS field. */
+#define TWI_ADDRESS_ADDRESS_Msk (0x7FUL << TWI_ADDRESS_ADDRESS_Pos) /*!< Bit mask of ADDRESS field. */
+
+/* Register: TWI_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define TWI_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define TWI_POWER_POWER_Msk (0x1UL << TWI_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define TWI_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define TWI_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: UART */
+/* Description: Universal Asynchronous Receiver/Transmitter. */
+
+/* Register: UART_SHORTS */
+/* Description: Shortcuts for UART. */
+
+/* Bit 4 : Shortcut between NCTS event and the STOPRX task. */
+#define UART_SHORTS_NCTS_STOPRX_Pos (4UL) /*!< Position of NCTS_STOPRX field. */
+#define UART_SHORTS_NCTS_STOPRX_Msk (0x1UL << UART_SHORTS_NCTS_STOPRX_Pos) /*!< Bit mask of NCTS_STOPRX field. */
+#define UART_SHORTS_NCTS_STOPRX_Disabled (0UL) /*!< Shortcut disabled. */
+#define UART_SHORTS_NCTS_STOPRX_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Bit 3 : Shortcut between CTS event and the STARTRX task. */
+#define UART_SHORTS_CTS_STARTRX_Pos (3UL) /*!< Position of CTS_STARTRX field. */
+#define UART_SHORTS_CTS_STARTRX_Msk (0x1UL << UART_SHORTS_CTS_STARTRX_Pos) /*!< Bit mask of CTS_STARTRX field. */
+#define UART_SHORTS_CTS_STARTRX_Disabled (0UL) /*!< Shortcut disabled. */
+#define UART_SHORTS_CTS_STARTRX_Enabled (1UL) /*!< Shortcut enabled. */
+
+/* Register: UART_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 17 : Enable interrupt on RXTO event. */
+#define UART_INTENSET_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UART_INTENSET_RXTO_Msk (0x1UL << UART_INTENSET_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UART_INTENSET_RXTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_RXTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_RXTO_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 9 : Enable interrupt on ERROR event. */
+#define UART_INTENSET_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UART_INTENSET_ERROR_Msk (0x1UL << UART_INTENSET_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UART_INTENSET_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_ERROR_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 7 : Enable interrupt on TXRDY event. */
+#define UART_INTENSET_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */
+#define UART_INTENSET_TXDRDY_Msk (0x1UL << UART_INTENSET_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */
+#define UART_INTENSET_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_TXDRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 2 : Enable interrupt on RXRDY event. */
+#define UART_INTENSET_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */
+#define UART_INTENSET_RXDRDY_Msk (0x1UL << UART_INTENSET_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */
+#define UART_INTENSET_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_RXDRDY_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 1 : Enable interrupt on NCTS event. */
+#define UART_INTENSET_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UART_INTENSET_NCTS_Msk (0x1UL << UART_INTENSET_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UART_INTENSET_NCTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_NCTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_NCTS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Bit 0 : Enable interrupt on CTS event. */
+#define UART_INTENSET_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UART_INTENSET_CTS_Msk (0x1UL << UART_INTENSET_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UART_INTENSET_CTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENSET_CTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENSET_CTS_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: UART_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 17 : Disable interrupt on RXTO event. */
+#define UART_INTENCLR_RXTO_Pos (17UL) /*!< Position of RXTO field. */
+#define UART_INTENCLR_RXTO_Msk (0x1UL << UART_INTENCLR_RXTO_Pos) /*!< Bit mask of RXTO field. */
+#define UART_INTENCLR_RXTO_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_RXTO_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_RXTO_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 9 : Disable interrupt on ERROR event. */
+#define UART_INTENCLR_ERROR_Pos (9UL) /*!< Position of ERROR field. */
+#define UART_INTENCLR_ERROR_Msk (0x1UL << UART_INTENCLR_ERROR_Pos) /*!< Bit mask of ERROR field. */
+#define UART_INTENCLR_ERROR_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_ERROR_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_ERROR_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 7 : Disable interrupt on TXRDY event. */
+#define UART_INTENCLR_TXDRDY_Pos (7UL) /*!< Position of TXDRDY field. */
+#define UART_INTENCLR_TXDRDY_Msk (0x1UL << UART_INTENCLR_TXDRDY_Pos) /*!< Bit mask of TXDRDY field. */
+#define UART_INTENCLR_TXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_TXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_TXDRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 2 : Disable interrupt on RXRDY event. */
+#define UART_INTENCLR_RXDRDY_Pos (2UL) /*!< Position of RXDRDY field. */
+#define UART_INTENCLR_RXDRDY_Msk (0x1UL << UART_INTENCLR_RXDRDY_Pos) /*!< Bit mask of RXDRDY field. */
+#define UART_INTENCLR_RXDRDY_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_RXDRDY_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_RXDRDY_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 1 : Disable interrupt on NCTS event. */
+#define UART_INTENCLR_NCTS_Pos (1UL) /*!< Position of NCTS field. */
+#define UART_INTENCLR_NCTS_Msk (0x1UL << UART_INTENCLR_NCTS_Pos) /*!< Bit mask of NCTS field. */
+#define UART_INTENCLR_NCTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_NCTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_NCTS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Bit 0 : Disable interrupt on CTS event. */
+#define UART_INTENCLR_CTS_Pos (0UL) /*!< Position of CTS field. */
+#define UART_INTENCLR_CTS_Msk (0x1UL << UART_INTENCLR_CTS_Pos) /*!< Bit mask of CTS field. */
+#define UART_INTENCLR_CTS_Disabled (0UL) /*!< Interrupt disabled. */
+#define UART_INTENCLR_CTS_Enabled (1UL) /*!< Interrupt enabled. */
+#define UART_INTENCLR_CTS_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: UART_ERRORSRC */
+/* Description: Error source. Write error field to 1 to clear error. */
+
+/* Bit 3 : The serial data input is '0' for longer than the length of a data frame. */
+#define UART_ERRORSRC_BREAK_Pos (3UL) /*!< Position of BREAK field. */
+#define UART_ERRORSRC_BREAK_Msk (0x1UL << UART_ERRORSRC_BREAK_Pos) /*!< Bit mask of BREAK field. */
+#define UART_ERRORSRC_BREAK_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_BREAK_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_BREAK_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 2 : A valid stop bit is not detected on the serial data input after all bits in a character have been received. */
+#define UART_ERRORSRC_FRAMING_Pos (2UL) /*!< Position of FRAMING field. */
+#define UART_ERRORSRC_FRAMING_Msk (0x1UL << UART_ERRORSRC_FRAMING_Pos) /*!< Bit mask of FRAMING field. */
+#define UART_ERRORSRC_FRAMING_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_FRAMING_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_FRAMING_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 1 : A character with bad parity is received. Only checked if HW parity control is enabled. */
+#define UART_ERRORSRC_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UART_ERRORSRC_PARITY_Msk (0x1UL << UART_ERRORSRC_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UART_ERRORSRC_PARITY_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_PARITY_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_PARITY_Clear (1UL) /*!< Clear error on write. */
+
+/* Bit 0 : A start bit is received while the previous data still lies in RXD. (Data loss). */
+#define UART_ERRORSRC_OVERRUN_Pos (0UL) /*!< Position of OVERRUN field. */
+#define UART_ERRORSRC_OVERRUN_Msk (0x1UL << UART_ERRORSRC_OVERRUN_Pos) /*!< Bit mask of OVERRUN field. */
+#define UART_ERRORSRC_OVERRUN_NotPresent (0UL) /*!< Error not present. */
+#define UART_ERRORSRC_OVERRUN_Present (1UL) /*!< Error present. */
+#define UART_ERRORSRC_OVERRUN_Clear (1UL) /*!< Clear error on write. */
+
+/* Register: UART_ENABLE */
+/* Description: Enable UART and acquire IOs. */
+
+/* Bits 2..0 : Enable or disable UART and acquire IOs. */
+#define UART_ENABLE_ENABLE_Pos (0UL) /*!< Position of ENABLE field. */
+#define UART_ENABLE_ENABLE_Msk (0x7UL << UART_ENABLE_ENABLE_Pos) /*!< Bit mask of ENABLE field. */
+#define UART_ENABLE_ENABLE_Disabled (0x00UL) /*!< UART disabled. */
+#define UART_ENABLE_ENABLE_Enabled (0x04UL) /*!< UART enabled. */
+
+/* Register: UART_RXD */
+/* Description: RXD register. On read action the buffer pointer is displaced. Once read the character is consummed. If read when no character available, the UART will stop working. */
+
+/* Bits 7..0 : RX data from previous transfer. Double buffered. */
+#define UART_RXD_RXD_Pos (0UL) /*!< Position of RXD field. */
+#define UART_RXD_RXD_Msk (0xFFUL << UART_RXD_RXD_Pos) /*!< Bit mask of RXD field. */
+
+/* Register: UART_TXD */
+/* Description: TXD register. */
+
+/* Bits 7..0 : TX data for transfer. */
+#define UART_TXD_TXD_Pos (0UL) /*!< Position of TXD field. */
+#define UART_TXD_TXD_Msk (0xFFUL << UART_TXD_TXD_Pos) /*!< Bit mask of TXD field. */
+
+/* Register: UART_BAUDRATE */
+/* Description: UART Baudrate. */
+
+/* Bits 31..0 : UART baudrate. */
+#define UART_BAUDRATE_BAUDRATE_Pos (0UL) /*!< Position of BAUDRATE field. */
+#define UART_BAUDRATE_BAUDRATE_Msk (0xFFFFFFFFUL << UART_BAUDRATE_BAUDRATE_Pos) /*!< Bit mask of BAUDRATE field. */
+#define UART_BAUDRATE_BAUDRATE_Baud1200 (0x0004F000UL) /*!< 1200 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud2400 (0x0009D000UL) /*!< 2400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud4800 (0x0013B000UL) /*!< 4800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud9600 (0x00275000UL) /*!< 9600 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud14400 (0x003B0000UL) /*!< 14400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud19200 (0x004EA000UL) /*!< 19200 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud28800 (0x0075F000UL) /*!< 28800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud38400 (0x009D5000UL) /*!< 38400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud57600 (0x00EBF000UL) /*!< 57600 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud76800 (0x013A9000UL) /*!< 76800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud115200 (0x01D7E000UL) /*!< 115200 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud230400 (0x03AFB000UL) /*!< 230400 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud250000 (0x04000000UL) /*!< 250000 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud460800 (0x075F7000UL) /*!< 460800 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud921600 (0x0EBEDFA4UL) /*!< 921600 baud. */
+#define UART_BAUDRATE_BAUDRATE_Baud1M (0x10000000UL) /*!< 1M baud. */
+
+/* Register: UART_CONFIG */
+/* Description: Configuration of parity and hardware flow control register. */
+
+/* Bits 3..1 : Include parity bit. */
+#define UART_CONFIG_PARITY_Pos (1UL) /*!< Position of PARITY field. */
+#define UART_CONFIG_PARITY_Msk (0x7UL << UART_CONFIG_PARITY_Pos) /*!< Bit mask of PARITY field. */
+#define UART_CONFIG_PARITY_Excluded (0UL) /*!< Parity bit excluded. */
+#define UART_CONFIG_PARITY_Included (7UL) /*!< Parity bit included. */
+
+/* Bit 0 : Hardware flow control. */
+#define UART_CONFIG_HWFC_Pos (0UL) /*!< Position of HWFC field. */
+#define UART_CONFIG_HWFC_Msk (0x1UL << UART_CONFIG_HWFC_Pos) /*!< Bit mask of HWFC field. */
+#define UART_CONFIG_HWFC_Disabled (0UL) /*!< Hardware flow control disabled. */
+#define UART_CONFIG_HWFC_Enabled (1UL) /*!< Hardware flow control enabled. */
+
+/* Register: UART_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define UART_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define UART_POWER_POWER_Msk (0x1UL << UART_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define UART_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define UART_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/* Peripheral: UICR */
+/* Description: User Information Configuration. */
+
+/* Register: UICR_RBPCONF */
+/* Description: Readback protection configuration. */
+
+/* Bits 15..8 : Readback protect all code in the device. */
+#define UICR_RBPCONF_PALL_Pos (8UL) /*!< Position of PALL field. */
+#define UICR_RBPCONF_PALL_Msk (0xFFUL << UICR_RBPCONF_PALL_Pos) /*!< Bit mask of PALL field. */
+#define UICR_RBPCONF_PALL_Disabled (0xFFUL) /*!< Disabled. */
+#define UICR_RBPCONF_PALL_Enabled (0x00UL) /*!< Enabled. */
+
+/* Bits 7..0 : Readback protect region 0. Will be ignored if pre-programmed factory code is present on the chip. */
+#define UICR_RBPCONF_PR0_Pos (0UL) /*!< Position of PR0 field. */
+#define UICR_RBPCONF_PR0_Msk (0xFFUL << UICR_RBPCONF_PR0_Pos) /*!< Bit mask of PR0 field. */
+#define UICR_RBPCONF_PR0_Disabled (0xFFUL) /*!< Disabled. */
+#define UICR_RBPCONF_PR0_Enabled (0x00UL) /*!< Enabled. */
+
+/* Register: UICR_XTALFREQ */
+/* Description: Reset value for CLOCK XTALFREQ register. */
+
+/* Bits 7..0 : Reset value for CLOCK XTALFREQ register. */
+#define UICR_XTALFREQ_XTALFREQ_Pos (0UL) /*!< Position of XTALFREQ field. */
+#define UICR_XTALFREQ_XTALFREQ_Msk (0xFFUL << UICR_XTALFREQ_XTALFREQ_Pos) /*!< Bit mask of XTALFREQ field. */
+#define UICR_XTALFREQ_XTALFREQ_16MHz (0xFFUL) /*!< 16MHz Xtal is used. */
+#define UICR_XTALFREQ_XTALFREQ_32MHz (0x00UL) /*!< 32MHz Xtal is used. */
+
+/* Register: UICR_FWID */
+/* Description: Firmware ID. */
+
+/* Bits 15..0 : Identification number for the firmware loaded into the chip. */
+#define UICR_FWID_FWID_Pos (0UL) /*!< Position of FWID field. */
+#define UICR_FWID_FWID_Msk (0xFFFFUL << UICR_FWID_FWID_Pos) /*!< Bit mask of FWID field. */
+
+
+/* Peripheral: WDT */
+/* Description: Watchdog Timer. */
+
+/* Register: WDT_INTENSET */
+/* Description: Interrupt enable set register. */
+
+/* Bit 0 : Enable interrupt on TIMEOUT event. */
+#define WDT_INTENSET_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */
+#define WDT_INTENSET_TIMEOUT_Msk (0x1UL << WDT_INTENSET_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */
+#define WDT_INTENSET_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */
+#define WDT_INTENSET_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */
+#define WDT_INTENSET_TIMEOUT_Set (1UL) /*!< Enable interrupt on write. */
+
+/* Register: WDT_INTENCLR */
+/* Description: Interrupt enable clear register. */
+
+/* Bit 0 : Disable interrupt on TIMEOUT event. */
+#define WDT_INTENCLR_TIMEOUT_Pos (0UL) /*!< Position of TIMEOUT field. */
+#define WDT_INTENCLR_TIMEOUT_Msk (0x1UL << WDT_INTENCLR_TIMEOUT_Pos) /*!< Bit mask of TIMEOUT field. */
+#define WDT_INTENCLR_TIMEOUT_Disabled (0UL) /*!< Interrupt disabled. */
+#define WDT_INTENCLR_TIMEOUT_Enabled (1UL) /*!< Interrupt enabled. */
+#define WDT_INTENCLR_TIMEOUT_Clear (1UL) /*!< Disable interrupt on write. */
+
+/* Register: WDT_RUNSTATUS */
+/* Description: Watchdog running status. */
+
+/* Bit 0 : Watchdog running status. */
+#define WDT_RUNSTATUS_RUNSTATUS_Pos (0UL) /*!< Position of RUNSTATUS field. */
+#define WDT_RUNSTATUS_RUNSTATUS_Msk (0x1UL << WDT_RUNSTATUS_RUNSTATUS_Pos) /*!< Bit mask of RUNSTATUS field. */
+#define WDT_RUNSTATUS_RUNSTATUS_NotRunning (0UL) /*!< Watchdog timer is not running. */
+#define WDT_RUNSTATUS_RUNSTATUS_Running (1UL) /*!< Watchdog timer is running. */
+
+/* Register: WDT_REQSTATUS */
+/* Description: Request status. */
+
+/* Bit 7 : Request status for RR[7]. */
+#define WDT_REQSTATUS_RR7_Pos (7UL) /*!< Position of RR7 field. */
+#define WDT_REQSTATUS_RR7_Msk (0x1UL << WDT_REQSTATUS_RR7_Pos) /*!< Bit mask of RR7 field. */
+#define WDT_REQSTATUS_RR7_DisabledOrRequested (0UL) /*!< RR[7] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR7_EnabledAndUnrequested (1UL) /*!< RR[7] register is enabled and has not jet requested. */
+
+/* Bit 6 : Request status for RR[6]. */
+#define WDT_REQSTATUS_RR6_Pos (6UL) /*!< Position of RR6 field. */
+#define WDT_REQSTATUS_RR6_Msk (0x1UL << WDT_REQSTATUS_RR6_Pos) /*!< Bit mask of RR6 field. */
+#define WDT_REQSTATUS_RR6_DisabledOrRequested (0UL) /*!< RR[6] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR6_EnabledAndUnrequested (1UL) /*!< RR[6] register is enabled and has not jet requested. */
+
+/* Bit 5 : Request status for RR[5]. */
+#define WDT_REQSTATUS_RR5_Pos (5UL) /*!< Position of RR5 field. */
+#define WDT_REQSTATUS_RR5_Msk (0x1UL << WDT_REQSTATUS_RR5_Pos) /*!< Bit mask of RR5 field. */
+#define WDT_REQSTATUS_RR5_DisabledOrRequested (0UL) /*!< RR[5] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR5_EnabledAndUnrequested (1UL) /*!< RR[5] register is enabled and has not jet requested. */
+
+/* Bit 4 : Request status for RR[4]. */
+#define WDT_REQSTATUS_RR4_Pos (4UL) /*!< Position of RR4 field. */
+#define WDT_REQSTATUS_RR4_Msk (0x1UL << WDT_REQSTATUS_RR4_Pos) /*!< Bit mask of RR4 field. */
+#define WDT_REQSTATUS_RR4_DisabledOrRequested (0UL) /*!< RR[4] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR4_EnabledAndUnrequested (1UL) /*!< RR[4] register is enabled and has not jet requested. */
+
+/* Bit 3 : Request status for RR[3]. */
+#define WDT_REQSTATUS_RR3_Pos (3UL) /*!< Position of RR3 field. */
+#define WDT_REQSTATUS_RR3_Msk (0x1UL << WDT_REQSTATUS_RR3_Pos) /*!< Bit mask of RR3 field. */
+#define WDT_REQSTATUS_RR3_DisabledOrRequested (0UL) /*!< RR[3] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR3_EnabledAndUnrequested (1UL) /*!< RR[3] register is enabled and has not jet requested. */
+
+/* Bit 2 : Request status for RR[2]. */
+#define WDT_REQSTATUS_RR2_Pos (2UL) /*!< Position of RR2 field. */
+#define WDT_REQSTATUS_RR2_Msk (0x1UL << WDT_REQSTATUS_RR2_Pos) /*!< Bit mask of RR2 field. */
+#define WDT_REQSTATUS_RR2_DisabledOrRequested (0UL) /*!< RR[2] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR2_EnabledAndUnrequested (1UL) /*!< RR[2] register is enabled and has not jet requested. */
+
+/* Bit 1 : Request status for RR[1]. */
+#define WDT_REQSTATUS_RR1_Pos (1UL) /*!< Position of RR1 field. */
+#define WDT_REQSTATUS_RR1_Msk (0x1UL << WDT_REQSTATUS_RR1_Pos) /*!< Bit mask of RR1 field. */
+#define WDT_REQSTATUS_RR1_DisabledOrRequested (0UL) /*!< RR[1] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR1_EnabledAndUnrequested (1UL) /*!< RR[1] register is enabled and has not jet requested. */
+
+/* Bit 0 : Request status for RR[0]. */
+#define WDT_REQSTATUS_RR0_Pos (0UL) /*!< Position of RR0 field. */
+#define WDT_REQSTATUS_RR0_Msk (0x1UL << WDT_REQSTATUS_RR0_Pos) /*!< Bit mask of RR0 field. */
+#define WDT_REQSTATUS_RR0_DisabledOrRequested (0UL) /*!< RR[0] register is not enabled or has already requested reload. */
+#define WDT_REQSTATUS_RR0_EnabledAndUnrequested (1UL) /*!< RR[0] register is enabled and has not jet requested. */
+
+/* Register: WDT_RREN */
+/* Description: Reload request enable. */
+
+/* Bit 7 : Enable or disable RR[7] register. */
+#define WDT_RREN_RR7_Pos (7UL) /*!< Position of RR7 field. */
+#define WDT_RREN_RR7_Msk (0x1UL << WDT_RREN_RR7_Pos) /*!< Bit mask of RR7 field. */
+#define WDT_RREN_RR7_Disabled (0UL) /*!< RR[7] register is disabled. */
+#define WDT_RREN_RR7_Enabled (1UL) /*!< RR[7] register is enabled. */
+
+/* Bit 6 : Enable or disable RR[6] register. */
+#define WDT_RREN_RR6_Pos (6UL) /*!< Position of RR6 field. */
+#define WDT_RREN_RR6_Msk (0x1UL << WDT_RREN_RR6_Pos) /*!< Bit mask of RR6 field. */
+#define WDT_RREN_RR6_Disabled (0UL) /*!< RR[6] register is disabled. */
+#define WDT_RREN_RR6_Enabled (1UL) /*!< RR[6] register is enabled. */
+
+/* Bit 5 : Enable or disable RR[5] register. */
+#define WDT_RREN_RR5_Pos (5UL) /*!< Position of RR5 field. */
+#define WDT_RREN_RR5_Msk (0x1UL << WDT_RREN_RR5_Pos) /*!< Bit mask of RR5 field. */
+#define WDT_RREN_RR5_Disabled (0UL) /*!< RR[5] register is disabled. */
+#define WDT_RREN_RR5_Enabled (1UL) /*!< RR[5] register is enabled. */
+
+/* Bit 4 : Enable or disable RR[4] register. */
+#define WDT_RREN_RR4_Pos (4UL) /*!< Position of RR4 field. */
+#define WDT_RREN_RR4_Msk (0x1UL << WDT_RREN_RR4_Pos) /*!< Bit mask of RR4 field. */
+#define WDT_RREN_RR4_Disabled (0UL) /*!< RR[4] register is disabled. */
+#define WDT_RREN_RR4_Enabled (1UL) /*!< RR[4] register is enabled. */
+
+/* Bit 3 : Enable or disable RR[3] register. */
+#define WDT_RREN_RR3_Pos (3UL) /*!< Position of RR3 field. */
+#define WDT_RREN_RR3_Msk (0x1UL << WDT_RREN_RR3_Pos) /*!< Bit mask of RR3 field. */
+#define WDT_RREN_RR3_Disabled (0UL) /*!< RR[3] register is disabled. */
+#define WDT_RREN_RR3_Enabled (1UL) /*!< RR[3] register is enabled. */
+
+/* Bit 2 : Enable or disable RR[2] register. */
+#define WDT_RREN_RR2_Pos (2UL) /*!< Position of RR2 field. */
+#define WDT_RREN_RR2_Msk (0x1UL << WDT_RREN_RR2_Pos) /*!< Bit mask of RR2 field. */
+#define WDT_RREN_RR2_Disabled (0UL) /*!< RR[2] register is disabled. */
+#define WDT_RREN_RR2_Enabled (1UL) /*!< RR[2] register is enabled. */
+
+/* Bit 1 : Enable or disable RR[1] register. */
+#define WDT_RREN_RR1_Pos (1UL) /*!< Position of RR1 field. */
+#define WDT_RREN_RR1_Msk (0x1UL << WDT_RREN_RR1_Pos) /*!< Bit mask of RR1 field. */
+#define WDT_RREN_RR1_Disabled (0UL) /*!< RR[1] register is disabled. */
+#define WDT_RREN_RR1_Enabled (1UL) /*!< RR[1] register is enabled. */
+
+/* Bit 0 : Enable or disable RR[0] register. */
+#define WDT_RREN_RR0_Pos (0UL) /*!< Position of RR0 field. */
+#define WDT_RREN_RR0_Msk (0x1UL << WDT_RREN_RR0_Pos) /*!< Bit mask of RR0 field. */
+#define WDT_RREN_RR0_Disabled (0UL) /*!< RR[0] register is disabled. */
+#define WDT_RREN_RR0_Enabled (1UL) /*!< RR[0] register is enabled. */
+
+/* Register: WDT_CONFIG */
+/* Description: Configuration register. */
+
+/* Bit 3 : Configure the watchdog to pause or not while the CPU is halted by the debugger. */
+#define WDT_CONFIG_HALT_Pos (3UL) /*!< Position of HALT field. */
+#define WDT_CONFIG_HALT_Msk (0x1UL << WDT_CONFIG_HALT_Pos) /*!< Bit mask of HALT field. */
+#define WDT_CONFIG_HALT_Pause (0UL) /*!< Pause watchdog while the CPU is halted by the debugger. */
+#define WDT_CONFIG_HALT_Run (1UL) /*!< Do not pause watchdog while the CPU is halted by the debugger. */
+
+/* Bit 0 : Configure the watchdog to pause or not while the CPU is sleeping. */
+#define WDT_CONFIG_SLEEP_Pos (0UL) /*!< Position of SLEEP field. */
+#define WDT_CONFIG_SLEEP_Msk (0x1UL << WDT_CONFIG_SLEEP_Pos) /*!< Bit mask of SLEEP field. */
+#define WDT_CONFIG_SLEEP_Pause (0UL) /*!< Pause watchdog while the CPU is asleep. */
+#define WDT_CONFIG_SLEEP_Run (1UL) /*!< Do not pause watchdog while the CPU is asleep. */
+
+/* Register: WDT_RR */
+/* Description: Reload requests registers. */
+
+/* Bits 31..0 : Reload register. */
+#define WDT_RR_RR_Pos (0UL) /*!< Position of RR field. */
+#define WDT_RR_RR_Msk (0xFFFFFFFFUL << WDT_RR_RR_Pos) /*!< Bit mask of RR field. */
+#define WDT_RR_RR_Reload (0x6E524635UL) /*!< Value to request a reload of the watchdog timer. */
+
+/* Register: WDT_POWER */
+/* Description: Peripheral power control. */
+
+/* Bit 0 : Peripheral power control. */
+#define WDT_POWER_POWER_Pos (0UL) /*!< Position of POWER field. */
+#define WDT_POWER_POWER_Msk (0x1UL << WDT_POWER_POWER_Pos) /*!< Bit mask of POWER field. */
+#define WDT_POWER_POWER_Disabled (0UL) /*!< Module power disabled. */
+#define WDT_POWER_POWER_Enabled (1UL) /*!< Module power enabled. */
+
+
+/*lint --flb "Leave library region" */
+#endif
diff --git a/bsp/nrf51822/Libraries/nrf51822/Include/nrf_gpio.h b/bsp/nrf51822/Libraries/nrf51822/Include/nrf_gpio.h
new file mode 100644
index 0000000000000000000000000000000000000000..8eab9517667eb7d5665518c21872526fcebeaea8
--- /dev/null
+++ b/bsp/nrf51822/Libraries/nrf51822/Include/nrf_gpio.h
@@ -0,0 +1,422 @@
+#ifndef NRF_GPIO_H__
+#define NRF_GPIO_H__
+
+#include "nrf51.h"
+#include "nrf51_bitfields.h"
+
+/**
+ * @defgroup nrf_gpio GPIO abstraction
+ * @{
+ * @ingroup nrf_drivers
+ * @brief GPIO pin abstraction and port abstraction for reading and writing byte-wise to GPIO ports.
+ *
+ * Here, the GPIO ports are defined as follows:
+ * - Port 0 -> pin 0-7
+ * - Port 1 -> pin 8-15
+ * - Port 2 -> pin 16-23
+ * - Port 3 -> pin 24-31
+ */
+
+/**
+ * @enum nrf_gpio_port_dir_t
+ * @brief Enumerator used for setting the direction of a GPIO port.
+ */
+typedef enum
+{
+ NRF_GPIO_PORT_DIR_OUTPUT, ///< Output
+ NRF_GPIO_PORT_DIR_INPUT ///< Input
+} nrf_gpio_port_dir_t;
+
+/**
+ * @enum nrf_gpio_pin_dir_t
+ * Pin direction definitions.
+ */
+typedef enum
+{
+ NRF_GPIO_PIN_DIR_INPUT, ///< Input
+ NRF_GPIO_PIN_DIR_OUTPUT ///< Output
+} nrf_gpio_pin_dir_t;
+
+/**
+ * @enum nrf_gpio_port_select_t
+ * @brief Enumerator used for selecting between port 0 - 3.
+ */
+typedef enum
+{
+ NRF_GPIO_PORT_SELECT_PORT0 = 0, ///< Port 0 (GPIO pin 0-7)
+ NRF_GPIO_PORT_SELECT_PORT1, ///< Port 1 (GPIO pin 8-15)
+ NRF_GPIO_PORT_SELECT_PORT2, ///< Port 2 (GPIO pin 16-23)
+ NRF_GPIO_PORT_SELECT_PORT3, ///< Port 3 (GPIO pin 24-31)
+} nrf_gpio_port_select_t;
+
+/**
+ * @enum nrf_gpio_pin_pull_t
+ * @brief Enumerator used for selecting the pin to be pulled down or up at the time of pin configuration
+ */
+typedef enum
+{
+ NRF_GPIO_PIN_NOPULL = GPIO_PIN_CNF_PULL_Disabled, ///< Pin pullup resistor disabled
+ NRF_GPIO_PIN_PULLDOWN = GPIO_PIN_CNF_PULL_Pulldown, ///< Pin pulldown resistor enabled
+ NRF_GPIO_PIN_PULLUP = GPIO_PIN_CNF_PULL_Pullup, ///< Pin pullup resistor enabled
+} nrf_gpio_pin_pull_t;
+
+/**
+ * @enum nrf_gpio_pin_sense_t
+ * @brief Enumerator used for selecting the pin to sense high or low level on the pin input.
+ */
+typedef enum
+{
+ NRF_GPIO_PIN_NOSENSE = GPIO_PIN_CNF_SENSE_Disabled, ///< Pin sense level disabled.
+ NRF_GPIO_PIN_SENSE_LOW = GPIO_PIN_CNF_SENSE_Low, ///< Pin sense low level.
+ NRF_GPIO_PIN_SENSE_HIGH = GPIO_PIN_CNF_SENSE_High, ///< Pin sense high level.
+} nrf_gpio_pin_sense_t;
+
+/**
+ * @brief Function for configuring the GPIO pin range as outputs with normal drive strength.
+ * This function can be used to configure pin range as simple output with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ *
+ * @param pin_range_start specifies the start number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pin_range_end specifies the end number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @note For configuring only one pin as output use @ref nrf_gpio_cfg_output
+ * Sense capability on the pin is disabled, and input is disconnected from the buffer as the pins are configured as output.
+ */
+static __INLINE void nrf_gpio_range_cfg_output(uint32_t pin_range_start, uint32_t pin_range_end)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ for (; pin_range_start <= pin_range_end; pin_range_start++)
+ {
+ NRF_GPIO->PIN_CNF[pin_range_start] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
+ }
+}
+
+/**
+ * @brief Function for configuring the GPIO pin range as inputs with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input.
+ *
+ * @param pin_range_start specifies the start number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pin_range_end specifies the end number (inclusive) in the range of pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pull_config State of the pin range pull resistor (no pull, pulled down or pulled high)
+ *
+ * @note For configuring only one pin as input use @ref nrf_gpio_cfg_input
+ * Sense capability on the pin is disabled, and input is connected to buffer so that the GPIO->IN register is readable
+ */
+static __INLINE void nrf_gpio_range_cfg_input(uint32_t pin_range_start, uint32_t pin_range_end, nrf_gpio_pin_pull_t pull_config)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ for (; pin_range_start <= pin_range_end; pin_range_start++)
+ {
+ NRF_GPIO->PIN_CNF[pin_range_start] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (pull_config << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+ }
+}
+
+/**
+ * @brief Function for configuring the given GPIO pin number as output with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ *
+ * @param pin_number specifies the pin number of gpio pin numbers to be configured (allowed values 0-30)
+ *
+ * @note Sense capability on the pin is disabled, and input is disconnected from the buffer as the pins are configured as output.
+ */
+static __INLINE void nrf_gpio_cfg_output(uint32_t pin_number)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ NRF_GPIO->PIN_CNF[pin_number] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Disconnect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos);
+}
+
+/**
+ * @brief Function for configuring the given GPIO pin number as input with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ *
+ * @param pin_number specifies the pin number of gpio pin numbers to be configured (allowed values 0-30)
+ *
+ * @param pull_config State of the pin range pull resistor (no pull, pulled down or pulled high)
+ *
+ * @note Sense capability on the pin is disabled, and input is connected to buffer so that the GPIO->IN register is readable
+ */
+static __INLINE void nrf_gpio_cfg_input(uint32_t pin_number, nrf_gpio_pin_pull_t pull_config)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ NRF_GPIO->PIN_CNF[pin_number] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (pull_config << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+}
+
+/**
+ * @brief Function for configuring the given GPIO pin number as input with given initial value set, hiding inner details.
+ * This function can be used to configure pin range as simple input with gate driving GPIO_PIN_CNF_DRIVE_S0S1 (normal cases).
+ * Sense capability on the pin is configurable, and input is connected to buffer so that the GPIO->IN register is readable.
+ *
+ * @param pin_number specifies the pin number of gpio pin numbers to be configured (allowed values 0-30).
+ *
+ * @param pull_config state of the pin pull resistor (no pull, pulled down or pulled high).
+ *
+ * @param sense_config sense level of the pin (no sense, sense low or sense high).
+ */
+static __INLINE void nrf_gpio_cfg_sense_input(uint32_t pin_number, nrf_gpio_pin_pull_t pull_config, nrf_gpio_pin_sense_t sense_config)
+{
+ /*lint -e{845} // A zero has been given as right argument to operator '|'" */
+ NRF_GPIO->PIN_CNF[pin_number] = (sense_config << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (pull_config << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+}
+
+/**
+ * @brief Function for setting the direction for a GPIO pin.
+ *
+ * @param pin_number specifies the pin number [0:31] for which to
+ * set the direction.
+ *
+ * @param direction specifies the direction
+ */
+static __INLINE void nrf_gpio_pin_dir_set(uint32_t pin_number, nrf_gpio_pin_dir_t direction)
+{
+ if(direction == NRF_GPIO_PIN_DIR_INPUT)
+ {
+ NRF_GPIO->PIN_CNF[pin_number] =
+ (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos)
+ | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos)
+ | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos)
+ | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos)
+ | (GPIO_PIN_CNF_DIR_Input << GPIO_PIN_CNF_DIR_Pos);
+ }
+ else
+ {
+ NRF_GPIO->DIRSET = (1UL << pin_number);
+ }
+}
+
+/**
+ * @brief Function for setting a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * set.
+ */
+static __INLINE void nrf_gpio_pin_set(uint32_t pin_number)
+{
+ NRF_GPIO->OUTSET = (1UL << pin_number);
+}
+
+/**
+ * @brief Function for clearing a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * clear.
+ */
+static __INLINE void nrf_gpio_pin_clear(uint32_t pin_number)
+{
+ NRF_GPIO->OUTCLR = (1UL << pin_number);
+}
+
+/**
+ * @brief Function for toggling a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * toggle.
+ */
+static __INLINE void nrf_gpio_pin_toggle(uint32_t pin_number)
+{
+ const uint32_t pin_bit = 1UL << pin_number;
+ const uint32_t pin_state = ((NRF_GPIO->OUT >> pin_number) & 1UL);
+
+ if (pin_state == 0)
+ {
+ // Current state low, set high.
+ NRF_GPIO->OUTSET = pin_bit;
+ }
+ else
+ {
+ // Current state high, set low.
+ NRF_GPIO->OUTCLR = pin_bit;
+ }
+}
+
+/**
+ * @brief Function for writing a value to a GPIO pin.
+ *
+ * Note that the pin must be configured as an output for this
+ * function to have any effect.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * write.
+ *
+ * @param value specifies the value to be written to the pin.
+ * @arg 0 clears the pin
+ * @arg >=1 sets the pin.
+ */
+static __INLINE void nrf_gpio_pin_write(uint32_t pin_number, uint32_t value)
+{
+ if (value == 0)
+ {
+ nrf_gpio_pin_clear(pin_number);
+ }
+ else
+ {
+ nrf_gpio_pin_set(pin_number);
+ }
+}
+
+/**
+ * @brief Function for reading the input level of a GPIO pin.
+ *
+ * Note that the pin must have input connected for the value
+ * returned from this function to be valid.
+ *
+ * @param pin_number specifies the pin number [0:31] to
+ * read.
+ *
+ * @return
+ * @retval 0 if the pin input level is low.
+ * @retval 1 if the pin input level is high.
+ * @retval > 1 should never occur.
+ */
+static __INLINE uint32_t nrf_gpio_pin_read(uint32_t pin_number)
+{
+ return ((NRF_GPIO->IN >> pin_number) & 1UL);
+}
+
+/**
+ * @brief Generic function for writing a single byte of a 32 bit word at a given
+ * address.
+ *
+ * This function should not be called from outside the nrf_gpio
+ * abstraction layer.
+ *
+ * @param word_address is the address of the word to be written.
+ *
+ * @param byte_no is the the word byte number (0-3) to be written.
+ *
+ * @param value is the value to be written to byte "byte_no" of word
+ * at address "word_address"
+ */
+static __INLINE void nrf_gpio_word_byte_write(volatile uint32_t * word_address, uint8_t byte_no, uint8_t value)
+{
+ *((volatile uint8_t*)(word_address) + byte_no) = value;
+}
+
+/**
+ * @brief Generic function for reading a single byte of a 32 bit word at a given
+ * address.
+ *
+ * This function should not be called from outside the nrf_gpio
+ * abstraction layer.
+ *
+ * @param word_address is the address of the word to be read.
+ *
+ * @param byte_no is the the byte number (0-3) of the word to be read.
+ *
+ * @return byte "byte_no" of word at address "word_address".
+ */
+static __INLINE uint8_t nrf_gpio_word_byte_read(const volatile uint32_t* word_address, uint8_t byte_no)
+{
+ return (*((const volatile uint8_t*)(word_address) + byte_no));
+}
+
+/**
+ * @brief Function for setting the direction of a port.
+ *
+ * @param port is the port for which to set the direction.
+ *
+ * @param dir direction to be set for this port.
+ */
+static __INLINE void nrf_gpio_port_dir_set(nrf_gpio_port_select_t port, nrf_gpio_port_dir_t dir)
+{
+ if (dir == NRF_GPIO_PORT_DIR_OUTPUT)
+ {
+ nrf_gpio_word_byte_write(&NRF_GPIO->DIRSET, port, 0xFF);
+ }
+ else
+ {
+ nrf_gpio_range_cfg_input(port*8, (port+1)*8-1, NRF_GPIO_PIN_NOPULL);
+ }
+}
+
+/**
+ * @brief Function for reading a GPIO port.
+ *
+ * @param port is the port to read.
+ *
+ * @return the input value on this port.
+ */
+static __INLINE uint8_t nrf_gpio_port_read(nrf_gpio_port_select_t port)
+{
+ return nrf_gpio_word_byte_read(&NRF_GPIO->IN, port);
+}
+
+/**
+ * @brief Function for writing to a GPIO port.
+ *
+ * @param port is the port to write.
+ *
+ * @param value is the value to write to this port.
+ *
+ * @sa nrf_gpio_port_dir_set()
+ */
+static __INLINE void nrf_gpio_port_write(nrf_gpio_port_select_t port, uint8_t value)
+{
+ nrf_gpio_word_byte_write(&NRF_GPIO->OUT, port, value);
+}
+
+/**
+ * @brief Function for setting individual pins on GPIO port.
+ *
+ * @param port is the port for which to set the pins.
+ *
+ * @param set_mask is a mask specifying which pins to set. A bit
+ * set to 1 indicates that the corresponding port pin shall be
+ * set.
+ *
+ * @sa nrf_gpio_port_dir_set()
+ */
+static __INLINE void nrf_gpio_port_set(nrf_gpio_port_select_t port, uint8_t set_mask)
+{
+ nrf_gpio_word_byte_write(&NRF_GPIO->OUTSET, port, set_mask);
+}
+
+/**
+ * @brief Function for clearing individual pins on GPIO port.
+ *
+ * @param port is the port for which to clear the pins.
+ *
+ * @param clr_mask is a mask specifying which pins to clear. A bit
+ * set to 1 indicates that the corresponding port pin shall be
+ * cleared.
+ *
+ * @sa nrf_gpio_port_dir_set()
+ */
+static __INLINE void nrf_gpio_port_clear(nrf_gpio_port_select_t port, uint8_t clr_mask)
+{
+ nrf_gpio_word_byte_write(&NRF_GPIO->OUTCLR, port, clr_mask);
+}
+
+/** @} */
+
+#endif
diff --git a/bsp/nrf51822/Libraries/nrf51822/Include/system_nrf51.h b/bsp/nrf51822/Libraries/nrf51822/Include/system_nrf51.h
new file mode 100644
index 0000000000000000000000000000000000000000..ae613609dd893761505f7d052034fb83e9e3bad0
--- /dev/null
+++ b/bsp/nrf51822/Libraries/nrf51822/Include/system_nrf51.h
@@ -0,0 +1,68 @@
+/* Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef SYSTEM_NRF51_H
+#define SYSTEM_NRF51_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include
+
+
+extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
+
+/**
+ * Initialize the system
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Setup the microcontroller system.
+ * Initialize the System and update the SystemCoreClock variable.
+ */
+extern void SystemInit (void);
+
+/**
+ * Update SystemCoreClock variable
+ *
+ * @param none
+ * @return none
+ *
+ * @brief Updates the SystemCoreClock with current core Clock
+ * retrieved from cpu registers.
+ */
+extern void SystemCoreClockUpdate (void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* SYSTEM_NRF51_H */
diff --git a/bsp/nrf51822/Libraries/nrf51822/Source/templates/arm/arm_startup_nrf51.s b/bsp/nrf51822/Libraries/nrf51822/Source/templates/arm/arm_startup_nrf51.s
new file mode 100644
index 0000000000000000000000000000000000000000..e06b1423b24ec33cb48ef3a39e09a5d5980f4fa1
--- /dev/null
+++ b/bsp/nrf51822/Libraries/nrf51822/Source/templates/arm/arm_startup_nrf51.s
@@ -0,0 +1,249 @@
+; Copyright (c) 2013, Nordic Semiconductor ASA
+; All rights reserved.
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions are met:
+;
+; * Redistributions of source code must retain the above copyright notice, this
+; list of conditions and the following disclaimer.
+;
+; * Redistributions in binary form must reproduce the above copyright notice,
+; this list of conditions and the following disclaimer in the documentation
+; and/or other materials provided with the distribution.
+;
+; * Neither the name of Nordic Semiconductor ASA nor the names of its
+; contributors may be used to endorse or promote products derived from
+; this software without specific prior written permission.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+; AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+; DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+; SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+; CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+; OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+; OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+; NOTE: Template files (including this one) are application specific and therefore
+; expected to be copied into the application project folder prior to its use!
+
+; Description message
+
+Stack_Size EQU 0x00000400
+ AREA STACK, NOINIT, READWRITE, ALIGN=3
+Stack_Mem SPACE Stack_Size
+__initial_sp
+
+Heap_Size EQU 0x00000000
+
+ AREA HEAP, NOINIT, READWRITE, ALIGN=3
+__heap_base
+Heap_Mem SPACE Heap_Size
+__heap_limit
+
+ PRESERVE8
+ THUMB
+
+; Vector Table Mapped to Address 0 at Reset
+
+ AREA RESET, DATA, READONLY
+ EXPORT __Vectors
+ EXPORT __Vectors_End
+ EXPORT __Vectors_Size
+
+__Vectors DCD __initial_sp ; Top of Stack
+ DCD Reset_Handler ; Reset Handler
+ DCD NMI_Handler ; NMI Handler
+ DCD HardFault_Handler ; Hard Fault Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD SVC_Handler ; SVCall Handler
+ DCD 0 ; Reserved
+ DCD 0 ; Reserved
+ DCD PendSV_Handler ; PendSV Handler
+ DCD SysTick_Handler ; SysTick Handler
+
+ ; External Interrupts
+ DCD POWER_CLOCK_IRQHandler ;POWER_CLOCK
+ DCD RADIO_IRQHandler ;RADIO
+ DCD UART0_IRQHandler ;UART0
+ DCD SPI0_TWI0_IRQHandler ;SPI0_TWI0
+ DCD SPI1_TWI1_IRQHandler ;SPI1_TWI1
+ DCD 0 ;Reserved
+ DCD GPIOTE_IRQHandler ;GPIOTE
+ DCD ADC_IRQHandler ;ADC
+ DCD TIMER0_IRQHandler ;TIMER0
+ DCD TIMER1_IRQHandler ;TIMER1
+ DCD TIMER2_IRQHandler ;TIMER2
+ DCD RTC0_IRQHandler ;RTC0
+ DCD TEMP_IRQHandler ;TEMP
+ DCD RNG_IRQHandler ;RNG
+ DCD ECB_IRQHandler ;ECB
+ DCD CCM_AAR_IRQHandler ;CCM_AAR
+ DCD WDT_IRQHandler ;WDT
+ DCD RTC1_IRQHandler ;RTC1
+ DCD QDEC_IRQHandler ;QDEC
+ DCD LPCOMP_IRQHandler ;LPCOMP
+ DCD SWI0_IRQHandler ;SWI0
+ DCD SWI1_IRQHandler ;SWI1
+ DCD SWI2_IRQHandler ;SWI2
+ DCD SWI3_IRQHandler ;SWI3
+ DCD SWI4_IRQHandler ;SWI4
+ DCD SWI5_IRQHandler ;SWI5
+ DCD 0 ;Reserved
+ DCD 0 ;Reserved
+ DCD 0 ;Reserved
+ DCD 0 ;Reserved
+ DCD 0 ;Reserved
+ DCD 0 ;Reserved
+
+
+__Vectors_End
+
+__Vectors_Size EQU __Vectors_End - __Vectors
+
+ AREA |.text|, CODE, READONLY
+
+; Reset Handler
+
+NRF_POWER_RAMON_ADDRESS EQU 0x40000524 ; NRF_POWER->RAMON address
+NRF_POWER_RAMONB_ADDRESS EQU 0x40000554 ; NRF_POWER->RAMONB address
+NRF_POWER_RAMONx_RAMxON_ONMODE_Msk EQU 0x3 ; All RAM blocks on in onmode bit mask
+
+Reset_Handler PROC
+ EXPORT Reset_Handler [WEAK]
+ IMPORT SystemInit
+ IMPORT __main
+
+ MOVS R1, #NRF_POWER_RAMONx_RAMxON_ONMODE_Msk
+
+ LDR R0, =NRF_POWER_RAMON_ADDRESS
+ LDR R2, [R0]
+ ORRS R2, R2, R1
+ STR R2, [R0]
+
+ LDR R0, =NRF_POWER_RAMONB_ADDRESS
+ LDR R2, [R0]
+ ORRS R2, R2, R1
+ STR R2, [R0]
+
+ LDR R0, =SystemInit
+ BLX R0
+ LDR R0, =__main
+ BX R0
+ ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler PROC
+ EXPORT NMI_Handler [WEAK]
+ B .
+ ENDP
+HardFault_Handler\
+ PROC
+ EXPORT HardFault_Handler [WEAK]
+ B .
+ ENDP
+SVC_Handler PROC
+ EXPORT SVC_Handler [WEAK]
+ B .
+ ENDP
+PendSV_Handler PROC
+ EXPORT PendSV_Handler [WEAK]
+ B .
+ ENDP
+SysTick_Handler PROC
+ EXPORT SysTick_Handler [WEAK]
+ B .
+ ENDP
+
+Default_Handler PROC
+
+ EXPORT POWER_CLOCK_IRQHandler [WEAK]
+ EXPORT RADIO_IRQHandler [WEAK]
+ EXPORT UART0_IRQHandler [WEAK]
+ EXPORT SPI0_TWI0_IRQHandler [WEAK]
+ EXPORT SPI1_TWI1_IRQHandler [WEAK]
+ EXPORT GPIOTE_IRQHandler [WEAK]
+ EXPORT ADC_IRQHandler [WEAK]
+ EXPORT TIMER0_IRQHandler [WEAK]
+ EXPORT TIMER1_IRQHandler [WEAK]
+ EXPORT TIMER2_IRQHandler [WEAK]
+ EXPORT RTC0_IRQHandler [WEAK]
+ EXPORT TEMP_IRQHandler [WEAK]
+ EXPORT RNG_IRQHandler [WEAK]
+ EXPORT ECB_IRQHandler [WEAK]
+ EXPORT CCM_AAR_IRQHandler [WEAK]
+ EXPORT WDT_IRQHandler [WEAK]
+ EXPORT RTC1_IRQHandler [WEAK]
+ EXPORT QDEC_IRQHandler [WEAK]
+ EXPORT LPCOMP_IRQHandler [WEAK]
+ EXPORT SWI0_IRQHandler [WEAK]
+ EXPORT SWI1_IRQHandler [WEAK]
+ EXPORT SWI2_IRQHandler [WEAK]
+ EXPORT SWI3_IRQHandler [WEAK]
+ EXPORT SWI4_IRQHandler [WEAK]
+ EXPORT SWI5_IRQHandler [WEAK]
+POWER_CLOCK_IRQHandler
+RADIO_IRQHandler
+UART0_IRQHandler
+SPI0_TWI0_IRQHandler
+SPI1_TWI1_IRQHandler
+GPIOTE_IRQHandler
+ADC_IRQHandler
+TIMER0_IRQHandler
+TIMER1_IRQHandler
+TIMER2_IRQHandler
+RTC0_IRQHandler
+TEMP_IRQHandler
+RNG_IRQHandler
+ECB_IRQHandler
+CCM_AAR_IRQHandler
+WDT_IRQHandler
+RTC1_IRQHandler
+QDEC_IRQHandler
+LPCOMP_IRQHandler
+SWI0_IRQHandler
+SWI1_IRQHandler
+SWI2_IRQHandler
+SWI3_IRQHandler
+SWI4_IRQHandler
+SWI5_IRQHandler
+
+ B .
+ ENDP
+ ALIGN
+
+; User Initial Stack & Heap
+
+ IF :DEF:__MICROLIB
+
+ EXPORT __initial_sp
+ EXPORT __heap_base
+ EXPORT __heap_limit
+
+ ELSE
+
+ IMPORT __use_two_region_memory
+ EXPORT __user_initial_stackheap
+__user_initial_stackheap
+
+ LDR R0, = Heap_Mem
+ LDR R1, = (Stack_Mem + Stack_Size)
+ LDR R2, = (Heap_Mem + Heap_Size)
+ LDR R3, = Stack_Mem
+ BX LR
+
+ ALIGN
+
+ ENDIF
+
+ END
+
diff --git a/bsp/nrf51822/Libraries/nrf51822/Source/templates/system_nrf51.c b/bsp/nrf51822/Libraries/nrf51822/Source/templates/system_nrf51.c
new file mode 100644
index 0000000000000000000000000000000000000000..712114e6c19b1b421cac4fd5850f81a9d892710e
--- /dev/null
+++ b/bsp/nrf51822/Libraries/nrf51822/Source/templates/system_nrf51.c
@@ -0,0 +1,121 @@
+/* Copyright (c) 2013, Nordic Semiconductor ASA
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * * Neither the name of Nordic Semiconductor ASA nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+/* NOTE: Template files (including this one) are application specific and therefore expected to
+ be copied into the application project folder prior to its use! */
+
+#include
+#include
+#include "nrf.h"
+#include "system_nrf51.h"
+
+/*lint ++flb "Enter library region" */
+
+
+#define __SYSTEM_CLOCK (16000000UL) /*!< nRF51 devices use a fixed System Clock Frequency of 16MHz */
+
+static bool is_manual_peripheral_setup_needed(void);
+static bool is_disabled_in_debug_needed(void);
+
+
+#if defined ( __CC_ARM )
+ uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK;
+#elif defined ( __ICCARM__ )
+ __root uint32_t SystemCoreClock = __SYSTEM_CLOCK;
+#elif defined ( __GNUC__ )
+ uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK;
+#endif
+
+void SystemCoreClockUpdate(void)
+{
+ SystemCoreClock = __SYSTEM_CLOCK;
+}
+
+void SystemInit(void)
+{
+ /* If desired, switch off the unused RAM to lower consumption by the use of RAMON register.
+ It can also be done in the application main() function. */
+
+ /* Prepare the peripherals for use as indicated by the PAN 26 "System: Manual setup is required
+ to enable the use of peripherals" found at Product Anomaly document for your device found at
+ https://www.nordicsemi.com/. The side effect of executing these instructions in the devices
+ that do not need it is that the new peripherals in the second generation devices (LPCOMP for
+ example) will not be available. */
+ if (is_manual_peripheral_setup_needed())
+ {
+ *(uint32_t volatile *)0x40000504 = 0xC007FFDF;
+ *(uint32_t volatile *)0x40006C18 = 0x00008000;
+ }
+
+ /* Disable PROTENSET registers under debug, as indicated by PAN 59 "MPU: Reset value of DISABLEINDEBUG
+ register is incorrect" found at Product Anomaly document four your device found at
+ https://www.nordicsemi.com/. There is no side effect of using these instruction if not needed. */
+ if (is_disabled_in_debug_needed())
+ {
+ NRF_MPU->DISABLEINDEBUG = MPU_DISABLEINDEBUG_DISABLEINDEBUG_Disabled << MPU_DISABLEINDEBUG_DISABLEINDEBUG_Pos;
+ }
+}
+
+
+static bool is_manual_peripheral_setup_needed(void)
+{
+ if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0))
+ {
+ if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x00) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+ {
+ return true;
+ }
+ if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x10) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+ {
+ return true;
+ }
+ if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x30) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+ {
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static bool is_disabled_in_debug_needed(void)
+{
+ if ((((*(uint32_t *)0xF0000FE0) & 0x000000FF) == 0x1) && (((*(uint32_t *)0xF0000FE4) & 0x0000000F) == 0x0))
+ {
+ if ((((*(uint32_t *)0xF0000FE8) & 0x000000F0) == 0x40) && (((*(uint32_t *)0xF0000FEC) & 0x000000F0) == 0x0))
+ {
+ return true;
+ }
+ }
+
+ return false;
+}
+
+/*lint --flb "Leave library region" */
diff --git a/bsp/nrf51822/SConscript b/bsp/nrf51822/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..744d8d782140ebedcf11de3c61a1fc03b3b106d2
--- /dev/null
+++ b/bsp/nrf51822/SConscript
@@ -0,0 +1,14 @@
+# for module compiling
+import os
+from building import *
+
+cwd = GetCurrentDir()
+objs = []
+list = os.listdir(cwd)
+
+for d in list:
+ path = os.path.join(cwd, d)
+ if os.path.isfile(os.path.join(path, 'SConscript')):
+ objs = objs + SConscript(os.path.join(d, 'SConscript'))
+
+Return('objs')
diff --git a/bsp/nrf51822/SConstruct b/bsp/nrf51822/SConstruct
new file mode 100644
index 0000000000000000000000000000000000000000..5813f6442c55a224cd11d43ebea0545a17a88c3c
--- /dev/null
+++ b/bsp/nrf51822/SConstruct
@@ -0,0 +1,34 @@
+import os
+import sys
+import rtconfig
+
+if os.getenv('RTT_ROOT'):
+ RTT_ROOT = os.getenv('RTT_ROOT')
+else:
+ RTT_ROOT = os.path.normpath(os.getcwd() + '/../..')
+
+sys.path = sys.path + [os.path.join(RTT_ROOT, 'tools')]
+from building import *
+
+TARGET = 'rtthread-stm32f0xx.' + rtconfig.TARGET_EXT
+
+env = Environment(tools = ['mingw'],
+ AS = rtconfig.AS, ASFLAGS = rtconfig.AFLAGS,
+ CC = rtconfig.CC, CCFLAGS = rtconfig.CFLAGS,
+ AR = rtconfig.AR, ARFLAGS = '-rc',
+ LINK = rtconfig.LINK, LINKFLAGS = rtconfig.LFLAGS)
+env.PrependENVPath('PATH', rtconfig.EXEC_PATH)
+
+if rtconfig.PLATFORM == 'iar':
+ env.Replace(CCCOM = ['$CC $CCFLAGS $CPPFLAGS $_CPPDEFFLAGS $_CPPINCFLAGS -o $TARGET $SOURCES'])
+ env.Replace(ARFLAGS = [''])
+ env.Replace(LINKCOM = ['$LINK $SOURCES $LINKFLAGS -o $TARGET --map project.map'])
+
+Export('RTT_ROOT')
+Export('rtconfig')
+
+# prepare building environment
+objs = PrepareBuilding(env, RTT_ROOT, has_libcpu=False)
+
+# make a building
+DoBuilding(TARGET, objs)
diff --git a/bsp/nrf51822/applications/SConscript b/bsp/nrf51822/applications/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..01eb940dfb35f92c503a78b0b49a4354590f9f3a
--- /dev/null
+++ b/bsp/nrf51822/applications/SConscript
@@ -0,0 +1,11 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+cwd = os.path.join(str(Dir('#')), 'applications')
+src = Glob('*.c')
+CPPPATH = [cwd, str(Dir('#'))]
+
+group = DefineGroup('Applications', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
diff --git a/bsp/nrf51822/applications/application.c b/bsp/nrf51822/applications/application.c
new file mode 100644
index 0000000000000000000000000000000000000000..355c8431564cbea5264d23c7a82fd17bbf2a196c
--- /dev/null
+++ b/bsp/nrf51822/applications/application.c
@@ -0,0 +1,39 @@
+/*
+ * File : application.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2015, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date Author Notes
+ * 2015-03-01 Yangfs the first version
+ * 2015-03-27 Bernard code cleanup.
+ */
+
+/**
+ * @addtogroup NRF51822
+ */
+/*@{*/
+
+#include
+
+#ifdef RT_USING_FINSH
+#include
+#include
+#endif
+
+int rt_application_init(void)
+{
+ /* Set finsh device */
+#ifdef RT_USING_FINSH
+ /* initialize finsh */
+ finsh_system_init();
+#endif
+ return 0;
+}
+
+
+/*@}*/
diff --git a/bsp/nrf51822/applications/startup.c b/bsp/nrf51822/applications/startup.c
new file mode 100644
index 0000000000000000000000000000000000000000..04a245a0333c7934080f799fb7dc8fe661f15380
--- /dev/null
+++ b/bsp/nrf51822/applications/startup.c
@@ -0,0 +1,94 @@
+/*
+ * File : startup.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2015, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date Author Notes
+ * 2015-03-01 Yangfs the first version
+ * 2015-03-27 Bernard code cleanup.
+ */
+
+#include
+#include
+
+#include "board.h"
+
+/**
+ * @addtogroup NRF51822
+ */
+
+/*@{*/
+
+extern int rt_application_init(void);
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#define NRF_SRAM_BEGIN (&Image$$RW_IRAM1$$ZI$$Limit)
+#elif __ICCARM__
+#pragma section="HEAP"
+#define NRF_SRAM_BEGIN (__segment_end("HEAP"))
+#else
+extern int __bss_end;
+#define NRF_SRAM_BEGIN (&__bss_end)
+#endif
+
+/**
+ * This function will startup RT-Thread RTOS.
+ */
+void rtthread_startup(void)
+{
+ /* init board */
+ rt_hw_board_init();
+
+ /* show version */
+ rt_show_version();
+
+ /* init tick */
+ rt_system_tick_init();
+
+ /* init kernel object */
+ rt_system_object_init();
+
+ /* init timer system */
+ rt_system_timer_init();
+
+#ifdef RT_USING_HEAP
+ rt_system_heap_init((void*)NRF_SRAM_BEGIN, (void*)NRF_SRAM_END);
+#endif
+
+ /* init scheduler system */
+ rt_system_scheduler_init();
+
+ /* init application */
+ rt_application_init();
+
+ /* init timer thread */
+ rt_system_timer_thread_init();
+
+ /* init idle thread */
+ rt_thread_idle_init();
+
+ /* start scheduler */
+ rt_system_scheduler_start();
+
+ /* never reach here */
+ return ;
+}
+
+int main(void)
+{
+ /* disable interrupt first */
+ rt_hw_interrupt_disable();
+
+ /* startup RT-Thread RTOS */
+ rtthread_startup();
+
+ return 0;
+}
+
+/*@}*/
diff --git a/bsp/nrf51822/drivers/SConscript b/bsp/nrf51822/drivers/SConscript
new file mode 100644
index 0000000000000000000000000000000000000000..638846d6564b73e6a6554e8791a062a2e13885ca
--- /dev/null
+++ b/bsp/nrf51822/drivers/SConscript
@@ -0,0 +1,13 @@
+Import('RTT_ROOT')
+Import('rtconfig')
+from building import *
+
+# get current directory
+cwd = GetCurrentDir()
+
+src = Glob('*.c')
+CPPPATH = [cwd]
+
+group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH)
+
+Return('group')
diff --git a/bsp/nrf51822/drivers/board.c b/bsp/nrf51822/drivers/board.c
new file mode 100644
index 0000000000000000000000000000000000000000..933e2237ccc7cc2ebf57853c0a351c3587074d23
--- /dev/null
+++ b/bsp/nrf51822/drivers/board.c
@@ -0,0 +1,94 @@
+/*
+ * File : board.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009 RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ */
+
+#include
+#include
+
+#include
+#include
+
+#include "board.h"
+#include "uart.h"
+
+/**
+ * @addtogroup NRF51822
+ */
+
+/*@{*/
+#define LFCLK_FREQUENCY (32768UL) /**< LFCLK frequency in Hertz, constant. */
+#define RTC_FREQUENCY (800UL) /**< Required RTC working clock RTC_FREQUENCY Hertz. Changable. */
+#define COUNTER_PRESCALER ((LFCLK_FREQUENCY / RTC_FREQUENCY) - 1) /* f = LFCLK/(prescaler + 1) */
+
+
+/** @brief Function starting the internal LFCLK XTAL oscillator.
+ */
+void lfclk_config(void)
+{
+ NRF_CLOCK->LFCLKSRC = (CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos);
+ NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
+ NRF_CLOCK->TASKS_LFCLKSTART = 1;
+ while (NRF_CLOCK->EVENTS_LFCLKSTARTED == 0)
+ {
+ //Do nothing.
+ }
+ NRF_CLOCK->EVENTS_LFCLKSTARTED = 0;
+}
+
+
+/** @brief Function for configuring the RTC with TICK to 100Hz.
+ */
+void rtc_config(void)
+{
+ NVIC_EnableIRQ(RTC0_IRQn); // Enable Interrupt for the RTC in the core.
+ NRF_RTC0->PRESCALER = COUNTER_PRESCALER; // Set prescaler to a TICK of RTC_FREQUENCY.
+
+ // Enable TICK event and TICK interrupt:
+ NRF_RTC0->EVTENSET = RTC_EVTENSET_TICK_Msk;
+ NRF_RTC0->INTENSET = RTC_INTENSET_TICK_Msk;
+}
+
+
+/** @brief: Function for handling the RTC0 interrupts.
+ * Triggered on TICK and COMPARE0 match.
+ */
+void RTC0_IRQHandler(void)
+{
+ /* enter interrupt */
+ rt_interrupt_enter();
+ if ((NRF_RTC0->EVENTS_TICK != 0) &&
+ ((NRF_RTC0->INTENSET & RTC_INTENSET_TICK_Msk) != 0))
+ {
+ NRF_RTC0->EVENTS_TICK = 0;
+
+ rt_tick_increase(); //This function will notify kernel there is one tick passed
+ }
+ /* leave interrupt */
+ rt_interrupt_leave();
+}
+
+
+/**
+ * This function will initial NRF51822 board.
+ */
+void rt_hw_board_init()
+{
+ lfclk_config();
+ rtc_config();
+ NRF_RTC0->TASKS_START = 1;
+ /* Initial usart deriver, and set console device */
+ rt_hw_uart_init();
+
+#ifdef RT_USING_CONSOLE
+ rt_console_set_device(RT_CONSOLE_DEVICE_NAME);
+#endif
+}
+
+/*@}*/
diff --git a/bsp/nrf51822/drivers/board.h b/bsp/nrf51822/drivers/board.h
new file mode 100644
index 0000000000000000000000000000000000000000..e19ceb246ec56cbef78ecf8572376da9450c006c
--- /dev/null
+++ b/bsp/nrf51822/drivers/board.h
@@ -0,0 +1,19 @@
+/*
+ * File : board.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2009, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ */
+
+#ifndef __BOARD_H__
+#define __BOARD_H__
+
+
+
+void rt_hw_board_init(void);
+
+#endif
diff --git a/bsp/nrf51822/drivers/uart.c b/bsp/nrf51822/drivers/uart.c
new file mode 100644
index 0000000000000000000000000000000000000000..56c3b1aefd98cfc9652d956c18a843e12e5978d3
--- /dev/null
+++ b/bsp/nrf51822/drivers/uart.c
@@ -0,0 +1,201 @@
+/*
+ * File : uart.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2015 RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ */
+
+#include
+#include
+#include
+
+#include
+#include
+
+#include "board.h"
+#include "uart.h"
+
+#include
+
+#define UART_RX_BUFSZ 512
+rt_uint8_t rx_buffer[UART_RX_BUFSZ];
+
+struct nrf51822_uart
+{
+ struct rt_device parent;
+ struct rt_ringbuffer rx_rb;
+} uart_device;
+
+void UART0_IRQHandler(void)
+{
+ rt_ubase_t level;
+ struct nrf51822_uart* uart = &uart_device;
+
+ level = rt_hw_interrupt_disable();
+
+ // Wait for RXD data to be received
+ while (NRF_UART0->EVENTS_RXDRDY != 1) ;
+ NRF_UART0->EVENTS_RXDRDY = 0;
+
+ rt_hw_interrupt_enable(level);
+ /* [Handling the data received over UART] */
+ rt_ringbuffer_putchar_force(&(uart->rx_rb), (rt_uint8_t)NRF_UART0->RXD);
+
+ /* invoke callback */
+ if(uart->parent.rx_indicate != RT_NULL)
+ {
+ uart->parent.rx_indicate(&uart->parent, rt_ringbuffer_data_len(&uart->rx_rb));
+ }
+}
+
+
+static rt_err_t rt_uart_init (rt_device_t dev)
+{
+ /* UART Initialization and Enable */
+ /** @snippet [Configure UART RX and TX pin] */
+ nrf_gpio_cfg_output(TX_PIN_NUMBER);
+ nrf_gpio_cfg_input(RX_PIN_NUMBER, NRF_GPIO_PIN_NOPULL);
+
+ NRF_UART0->PSELTXD = TX_PIN_NUMBER;
+ NRF_UART0->PSELRXD = RX_PIN_NUMBER;
+ /** @snippet [Configure UART RX and TX pin] */
+ if (HWFC)
+ {
+ nrf_gpio_cfg_output(RTS_PIN_NUMBER);
+ nrf_gpio_cfg_input(CTS_PIN_NUMBER, NRF_GPIO_PIN_NOPULL);
+ NRF_UART0->PSELCTS = CTS_PIN_NUMBER;
+ NRF_UART0->PSELRTS = RTS_PIN_NUMBER;
+ NRF_UART0->CONFIG = (UART_CONFIG_HWFC_Enabled << UART_CONFIG_HWFC_Pos);
+ }
+
+ NRF_UART0->BAUDRATE = (UART_BAUDRATE_BAUDRATE_Baud38400 << UART_BAUDRATE_BAUDRATE_Pos);
+ NRF_UART0->ENABLE = (UART_ENABLE_ENABLE_Enabled << UART_ENABLE_ENABLE_Pos);
+ NRF_UART0->TASKS_STARTTX = 1;
+ NRF_UART0->TASKS_STARTRX = 1;
+ NRF_UART0->EVENTS_RXDRDY = 0;
+
+ NRF_UART0->INTENSET = (UART_INTENSET_RXDRDY_Enabled << UART_INTENSET_RXDRDY_Pos);
+
+ NVIC_EnableIRQ(UART0_IRQn);
+
+ return RT_EOK;
+}
+
+static rt_err_t rt_uart_open(rt_device_t dev, rt_uint16_t oflag)
+{
+ RT_ASSERT(dev != RT_NULL);
+ if (dev->flag & RT_DEVICE_FLAG_INT_RX)
+ {
+ /* Enable the UART Interrupt */
+ NVIC_EnableIRQ(UART0_IRQn);
+ }
+
+ return RT_EOK;
+}
+
+static rt_err_t rt_uart_close(rt_device_t dev)
+{
+ RT_ASSERT(dev != RT_NULL);
+ if (dev->flag & RT_DEVICE_FLAG_INT_RX)
+ {
+ /* Disable the UART Interrupt */
+ NVIC_DisableIRQ(UART0_IRQn);
+ }
+
+ return RT_EOK;
+}
+
+static rt_size_t rt_uart_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
+{
+ rt_size_t length;
+ struct nrf51822_uart *uart = (struct nrf51822_uart*)dev;
+ /* interrupt receive */
+ rt_base_t level;
+
+ RT_ASSERT(uart != RT_NULL);
+
+ /* disable interrupt */
+ level = rt_hw_interrupt_disable();
+ length = rt_ringbuffer_get(&(uart->rx_rb), buffer, size);
+ /* enable interrupt */
+ rt_hw_interrupt_enable(level);
+
+ return length;
+}
+
+static rt_size_t rt_uart_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
+{
+ char *ptr;
+ ptr = (char*) buffer;
+
+ if (dev->open_flag & RT_DEVICE_FLAG_STREAM)
+ {
+ /* stream mode */
+ while (size)
+ {
+ if (*ptr == '\n')
+ {
+ NRF_UART0->TXD = (uint8_t)'\r';
+
+ // Wait for TXD data to be sent.
+ while (NRF_UART0->EVENTS_TXDRDY != 1) ;
+
+ NRF_UART0->EVENTS_TXDRDY = 0;
+ }
+
+ NRF_UART0->TXD = (uint8_t)(*ptr);
+
+ // Wait for TXD data to be sent.
+ while (NRF_UART0->EVENTS_TXDRDY != 1) ;
+
+ NRF_UART0->EVENTS_TXDRDY = 0;
+
+ ptr ++;
+ size --;
+ }
+ }
+ else
+ {
+ while ( size != 0 )
+ {
+ NRF_UART0->TXD = (uint8_t)(*ptr);
+
+ // Wait for TXD data to be sent.
+ while (NRF_UART0->EVENTS_TXDRDY != 1) ;
+
+ NRF_UART0->EVENTS_TXDRDY = 0;
+
+ ptr++;
+ size--;
+ }
+ }
+
+ return (rt_size_t) ptr - (rt_size_t) buffer;
+}
+
+void rt_hw_uart_init(void)
+{
+ struct nrf51822_uart* uart;
+
+ /* get uart device */
+ uart = &uart_device;
+
+ /* device initialization */
+ uart->parent.type = RT_Device_Class_Char;
+ rt_ringbuffer_init(&(uart->rx_rb), rx_buffer, sizeof(rx_buffer));
+
+ /* device interface */
+ uart->parent.init = rt_uart_init;
+ uart->parent.open = rt_uart_open;
+ uart->parent.close = rt_uart_close;
+ uart->parent.read = rt_uart_read;
+ uart->parent.write = rt_uart_write;
+ uart->parent.control = RT_NULL;
+ uart->parent.user_data = RT_NULL;
+
+ rt_device_register(&uart->parent, "uart0", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
+}
diff --git a/bsp/nrf51822/drivers/uart.h b/bsp/nrf51822/drivers/uart.h
new file mode 100644
index 0000000000000000000000000000000000000000..5ad910d3aaf22ed8a6220596b735606485686e87
--- /dev/null
+++ b/bsp/nrf51822/drivers/uart.h
@@ -0,0 +1,26 @@
+/*
+ * File : uart.h
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2015, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ */
+
+#ifndef __UART_H__
+#define __UART_H__
+
+
+
+#define RX_PIN_NUMBER 23
+#define TX_PIN_NUMBER 24
+#define CTS_PIN_NUMBER 25
+#define RTS_PIN_NUMBER 22
+#define HWFC false
+
+
+void rt_hw_uart_init(void);
+
+#endif
diff --git a/bsp/nrf51822/rtconfig.h b/bsp/nrf51822/rtconfig.h
new file mode 100644
index 0000000000000000000000000000000000000000..b4df9066cb7e9b460737e6337051765acc2aa515
--- /dev/null
+++ b/bsp/nrf51822/rtconfig.h
@@ -0,0 +1,94 @@
+/* RT-Thread config file */
+#ifndef __RTTHREAD_CFG_H__
+#define __RTTHREAD_CFG_H__
+
+/* RT_NAME_MAX*/
+#define RT_NAME_MAX 6
+
+/* RT_ALIGN_SIZE*/
+#define RT_ALIGN_SIZE 4
+
+/* PRIORITY_MAX */
+#define RT_THREAD_PRIORITY_MAX 8
+
+/* Tick per Second */
+#define RT_TICK_PER_SECOND 100
+
+/* SECTION: RT_DEBUG */
+/* Thread Debug */
+#define RT_DEBUG
+//#define RT_DEBUG_INIT 1
+#define RT_USING_OVERFLOW_CHECK
+
+/* Using Hook */
+#define RT_USING_HOOK
+
+#define IDLE_THREAD_STACK_SIZE 512
+
+/* Using Software Timer */
+/* #define RT_USING_TIMER_SOFT */
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 512
+#define RT_TIMER_TICK_PER_SECOND 100
+
+/* SECTION: IPC */
+/* Using Semaphore*/
+#define RT_USING_SEMAPHORE
+
+/* Using Mutex */
+/* #define RT_USING_MUTEX */
+
+/* Using Event */
+/* #define RT_USING_EVENT */
+
+/* Using MailBox */
+#define RT_USING_MAILBOX
+
+/* Using Message Queue */
+/* #define RT_USING_MESSAGEQUEUE */
+
+/* SECTION: Memory Management */
+/* Using Memory Pool Management*/
+/* #define RT_USING_MEMPOOL */
+
+/* Using Dynamic Heap Management */
+//#define RT_USING_HEAP
+
+/* Using Small MM */
+#define RT_USING_SMALL_MEM
+#define RT_USING_TINY_SIZE
+
+//
+//#define RT_USING_COMPONENTS_INIT
+
+/* SECTION: Device System */
+/* Using Device System */
+#define RT_USING_DEVICE
+//
+#define RT_USING_DEVICE_IPC
+//
+//#define RT_USING_SERIAL
+
+/* SECTION: Console options */
+#define RT_USING_CONSOLE
+/* the buffer size of console*/
+#define RT_CONSOLEBUF_SIZE 128
+//
+#define RT_CONSOLE_DEVICE_NAME "uart0"
+
+
+
+/* SECTION: finsh, a C-Express shell */
+#define RT_USING_FINSH
+/* configure finsh parameters */
+#define FINSH_THREAD_PRIORITY 6
+#define FINSH_THREAD_STACK_SIZE 512
+#define FINSH_HISTORY_LINES 1
+/* Using symbol table */
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+
+#define FINSH_USING_MSH
+#define FINSH_USING_MSH_ONLY
+
+#endif
diff --git a/bsp/nrf51822/rtconfig.py b/bsp/nrf51822/rtconfig.py
new file mode 100644
index 0000000000000000000000000000000000000000..3e9c68fed8e6254b0c6184a1274be536591933c8
--- /dev/null
+++ b/bsp/nrf51822/rtconfig.py
@@ -0,0 +1,83 @@
+import os
+
+# toolchains options
+ARCH='arm'
+CPU='cortex-m0'
+CROSS_TOOL='keil'
+
+if os.getenv('RTT_CC'):
+ CROSS_TOOL = os.getenv('RTT_CC')
+
+# cross_tool provides the cross compiler
+# EXEC_PATH is the compiler execute path, for example, CodeSourcery, Keil MDK, IAR
+if CROSS_TOOL == 'gcc':
+ PLATFORM = 'gcc'
+ EXEC_PATH = 'C:/Program Files/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin'
+elif CROSS_TOOL == 'keil':
+ PLATFORM = 'armcc'
+ EXEC_PATH = 'C:/Keil_v5'
+elif CROSS_TOOL == 'iar':
+ print '================ERROR============================'
+ print 'Not support iar yet!'
+ print '================================================='
+ exit(0)
+
+if os.getenv('RTT_EXEC_PATH'):
+ EXEC_PATH = os.getenv('RTT_EXEC_PATH')
+
+BUILD = 'debug'
+NRF_TYPE = 'NRF51822'
+
+if PLATFORM == 'gcc':
+ # toolchains
+ PREFIX = 'arm-none-eabi-'
+ CC = PREFIX + 'gcc'
+ AS = PREFIX + 'gcc'
+ AR = PREFIX + 'ar'
+ LINK = PREFIX + 'gcc'
+ TARGET_EXT = 'axf'
+ SIZE = PREFIX + 'size'
+ OBJDUMP = PREFIX + 'objdump'
+ OBJCPY = PREFIX + 'objcopy'
+
+ DEVICE = ' -mcpu=cortex-m0 -mthumb -ffunction-sections -fdata-sections'
+ CFLAGS = DEVICE
+ AFLAGS = ' -c' + DEVICE + ' -x assembler-with-cpp'
+ LFLAGS = DEVICE + ' -Wl,--gc-sections,-Map=rtthread-nrf51822.map,-cref,-u,Reset_Handler -T nrf51822_rom.ld'
+
+ CPATH = ''
+ LPATH = ''
+
+ if BUILD == 'debug':
+ CFLAGS += ' -O0 -gdwarf-2'
+ AFLAGS += ' -gdwarf-2'
+ else:
+ CFLAGS += ' -O2'
+
+ POST_ACTION = OBJCPY + ' -O binary $TARGET rtthread.bin\n' + SIZE + ' $TARGET \n'
+
+elif PLATFORM == 'armcc':
+ # toolchains
+ CC = 'armcc'
+ AS = 'armasm'
+ AR = 'armar'
+ LINK = 'armlink'
+ TARGET_EXT = 'axf'
+
+ DEVICE = ' --device DARMSTM'
+ CFLAGS = DEVICE + ' --apcs=interwork'
+ AFLAGS = DEVICE
+ LFLAGS = DEVICE + ' --info sizes --info totals --info unused --info veneers --list rtthread-stm32.map --scatter nrf51822_rom.sct'
+
+ CFLAGS += ' -I' + EXEC_PATH + '/ARM/RV31/INC'
+ LFLAGS += ' --libpath ' + EXEC_PATH + '/ARM/RV31/LIB'
+
+ EXEC_PATH += '/arm/bin40/'
+
+ if BUILD == 'debug':
+ CFLAGS += ' -g -O0'
+ AFLAGS += ' -g'
+ else:
+ CFLAGS += ' -O2'
+
+ POST_ACTION = 'fromelf --bin $TARGET --output rtthread.bin \nfromelf -z $TARGET'
diff --git a/bsp/nrf51822/template.uvproj b/bsp/nrf51822/template.uvproj
new file mode 100644
index 0000000000000000000000000000000000000000..e91384c2773d78c1d1660ac1812e5ced4828ea4e
--- /dev/null
+++ b/bsp/nrf51822/template.uvproj
@@ -0,0 +1,410 @@
+
+
+
+ 1.1
+
+ ### uVision Project, (C) Keil Software
+
+
+
+ rt-thread
+ 0x4
+ ARM-ADS
+
+
+ nRF51822_xxAA
+ Nordic Semiconductor
+ NordicSemiconductor.nRF_DeviceFamilyPack.1.1.4
+ http://developer.nordicsemi.com/nRF51_SDK/pieces/nRF_DeviceFamilyPack/
+ IROM(0x00000000,0x40000) IRAM(0x20000000,0x4000) CPUTYPE("Cortex-M0") CLOCK(12000000) ELITTLE
+
+
+ UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0nrf51xxx -FS00 -FL0200000 -FP0($$Device:nRF51822_xxAA$Flash\nrf51xxx.flm))
+ 0
+ $$Device:nRF51822_xxAA$Device\Include\nrf.h
+
+
+
+
+
+
+
+
+
+ $$Device:nRF51822_xxAA$SVD\nrf51.xml
+ 0
+ 0
+
+
+
+
+
+
+ 0
+ 0
+ 0
+ 0
+ 1
+
+ .\build\
+ template
+ 1
+ 0
+ 0
+ 1
+ 1
+ .\build\
+ 1
+ 0
+ 0
+
+ 0
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+
+
+ 0
+ 0
+
+
+ 0
+ 0
+ 0
+ 0
+
+
+ 0
+ 0
+
+
+ 0
+ 0
+
+ 0
+
+
+
+ 0
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 3
+
+
+ 1
+
+
+ SARMCM3.DLL
+
+ DARMCM1.DLL
+ -pCM0
+ SARMCM3.DLL
+
+ TARMCM1.DLL
+ -pCM0
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 16
+
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 1
+
+
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 1
+ 0
+ 1
+
+ 0
+ 6
+
+
+
+
+
+
+
+
+
+
+
+
+
+ Segger\JL2CM3.dll
+
+
+
+
+ 1
+ 0
+ 0
+ 1
+ 1
+ 4096
+
+ 1
+ BIN\UL2CM3.DLL
+ "" ()
+
+
+
+
+ 0
+
+
+
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 1
+ 1
+ 0
+ 0
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 1
+ 0
+ 0
+ "Cortex-M0"
+
+ 0
+ 0
+ 0
+ 1
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 8
+ 0
+ 0
+ 0
+ 3
+ 3
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 1
+ 0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x20000000
+ 0x4000
+
+
+ 1
+ 0x0
+ 0x40000
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 1
+ 0x16000
+ 0x2a000
+
+
+ 1
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x0
+ 0x0
+
+
+ 0
+ 0x20002000
+ 0x2000
+
+
+ 0
+ 0x0
+ 0x0
+
+
+
+
+
+ 1
+ 1
+ 0
+ 0
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+ --c99
+ NRF51 DEBUG_NRF_USER BLE_STACK_SUPPORT_REQD ENABLE_DEBUG_LOG_SUPPORT BOARD_WATCH1000
+
+
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+ 0
+
+
+
+
+
+
+
+
+ 1
+ 0
+ 0
+ 0
+ 1
+ 0
+ 0x08000000
+ 0x20000000
+
+
+
+
+
+
+
+
+
+
+
+
+
+