// Copyright 2013 The Rust Project Developers. See the COPYRIGHT
// file at the top-level directory of this distribution and at
// http://rust-lang.org/COPYRIGHT.
//
// Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
// http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
// <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
// option. This file may not be copied, modified, or distributed
// except according to those terms.

//! The implementation of `rtio` for libuv

use std::c_str::CString;
use std::io::IoError;
use std::io::net::ip::SocketAddr;
use std::io::signal::Signum;
use std::io::{FileMode, FileAccess, Open, Append, Truncate, Read, Write,
              ReadWrite, FileStat};
use std::io;
use std::mem;
use libc::c_int;
use libc::{O_CREAT, O_APPEND, O_TRUNC, O_RDWR, O_RDONLY, O_WRONLY, S_IRUSR,
                S_IWUSR};
use libc;
use std::path::Path;
use std::rt::rtio;
use std::rt::rtio::{ProcessConfig, IoFactory, EventLoop};
use ai = std::io::net::addrinfo;

#[cfg(test)] use std::unstable::run_in_bare_thread;

use super::{uv_error_to_io_error, Loop};

use addrinfo::GetAddrInfoRequest;
use async::AsyncWatcher;
use file::{FsRequest, FileWatcher};
use queue::QueuePool;
use homing::HomeHandle;
use idle::IdleWatcher;
use net::{TcpWatcher, TcpListener, UdpWatcher};
use pipe::{PipeWatcher, PipeListener};
use process::Process;
use signal::SignalWatcher;
use timer::TimerWatcher;
use tty::TtyWatcher;
use uvll;

// Obviously an Event Loop is always home.
pub struct UvEventLoop {
    uvio: UvIoFactory
}

impl UvEventLoop {
    pub fn new() -> UvEventLoop {
        let mut loop_ = Loop::new();
        let handle_pool = QueuePool::new(&mut loop_);
        UvEventLoop {
            uvio: UvIoFactory {
                loop_: loop_,
                handle_pool: Some(handle_pool),
            }
        }
    }
}

impl Drop for UvEventLoop {
    fn drop(&mut self) {
        // Must first destroy the pool of handles before we destroy the loop
        // because otherwise the contained async handle will be destroyed after
        // the loop is free'd (use-after-free). We also must free the uv handle
        // after the loop has been closed because during the closing of the loop
        // the handle is required to be used apparently.
        //
        // Lastly, after we've closed the pool of handles we pump the event loop
        // one last time to run any closing callbacks to make sure the loop
        // shuts down cleanly.
        let handle = self.uvio.handle_pool.get_ref().handle();
        drop(self.uvio.handle_pool.take());
        self.run();

        self.uvio.loop_.close();
        unsafe { uvll::free_handle(handle) }
    }
}

impl EventLoop for UvEventLoop {
    fn run(&mut self) {
        self.uvio.loop_.run();
    }

    fn callback(&mut self, f: proc()) {
        IdleWatcher::onetime(&mut self.uvio.loop_, f);
    }

    fn pausable_idle_callback(&mut self, cb: Box<rtio::Callback:Send>)
                              -> Box<rtio::PausableIdleCallback:Send> {
        IdleWatcher::new(&mut self.uvio.loop_, cb)
                         as Box<rtio::PausableIdleCallback:Send>
    }

    fn remote_callback(&mut self, f: Box<rtio::Callback:Send>)
                       -> Box<rtio::RemoteCallback:Send> {
        box AsyncWatcher::new(&mut self.uvio.loop_, f) as
            Box<rtio::RemoteCallback:Send>
    }

    fn io<'a>(&'a mut self) -> Option<&'a mut rtio::IoFactory> {
        let factory = &mut self.uvio as &mut rtio::IoFactory;
        Some(factory)
    }

    fn has_active_io(&self) -> bool {
        self.uvio.loop_.get_blockers() > 0
    }
}

#[test]
fn test_callback_run_once() {
    run_in_bare_thread(proc() {
        let mut event_loop = UvEventLoop::new();
        let mut count = 0;
        let count_ptr: *mut int = &mut count;
        event_loop.callback(proc() {
            unsafe { *count_ptr += 1 }
        });
        event_loop.run();
        assert_eq!(count, 1);
    });
}

pub struct UvIoFactory {
    pub loop_: Loop,
    handle_pool: Option<Box<QueuePool>>,
}

impl UvIoFactory {
    pub fn uv_loop<'a>(&mut self) -> *uvll::uv_loop_t { self.loop_.handle }

    pub fn make_handle(&mut self) -> HomeHandle {
        // It's understood by the homing code that the "local id" is just the
        // pointer of the local I/O factory cast to a uint.
        let id: uint = unsafe { mem::transmute_copy(&self) };
        HomeHandle::new(id, &mut **self.handle_pool.get_mut_ref())
    }
}

impl IoFactory for UvIoFactory {
    // Connect to an address and return a new stream
    // NB: This blocks the task waiting on the connection.
    // It would probably be better to return a future
    fn tcp_connect(&mut self, addr: SocketAddr, timeout: Option<u64>)
                   -> Result<Box<rtio::RtioTcpStream:Send>, IoError> {
        match TcpWatcher::connect(self, addr, timeout) {
            Ok(t) => Ok(box t as Box<rtio::RtioTcpStream:Send>),
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }

    fn tcp_bind(&mut self, addr: SocketAddr)
                -> Result<Box<rtio::RtioTcpListener:Send>, IoError> {
        match TcpListener::bind(self, addr) {
            Ok(t) => Ok(t as Box<rtio::RtioTcpListener:Send>),
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }

    fn udp_bind(&mut self, addr: SocketAddr)
                -> Result<Box<rtio::RtioUdpSocket:Send>, IoError> {
        match UdpWatcher::bind(self, addr) {
            Ok(u) => Ok(box u as Box<rtio::RtioUdpSocket:Send>),
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }

    fn timer_init(&mut self) -> Result<Box<rtio::RtioTimer:Send>, IoError> {
        Ok(TimerWatcher::new(self) as Box<rtio::RtioTimer:Send>)
    }

    fn get_host_addresses(&mut self, host: Option<&str>, servname: Option<&str>,
                          hint: Option<ai::Hint>) -> Result<Vec<ai::Info>, IoError> {
        let r = GetAddrInfoRequest::run(&self.loop_, host, servname, hint);
        r.map_err(uv_error_to_io_error)
    }

    fn fs_from_raw_fd(&mut self, fd: c_int, close: rtio::CloseBehavior)
                      -> Box<rtio::RtioFileStream:Send> {
        box FileWatcher::new(self, fd, close) as
            Box<rtio::RtioFileStream:Send>
    }

    fn fs_open(&mut self, path: &CString, fm: FileMode, fa: FileAccess)
               -> Result<Box<rtio::RtioFileStream:Send>, IoError> {
        let flags = match fm {
            io::Open => 0,
            io::Append => libc::O_APPEND,
            io::Truncate => libc::O_TRUNC,
        };
        // Opening with a write permission must silently create the file.
        let (flags, mode) = match fa {
            io::Read => (flags | libc::O_RDONLY, 0),
            io::Write => (flags | libc::O_WRONLY | libc::O_CREAT,
                          libc::S_IRUSR | libc::S_IWUSR),
            io::ReadWrite => (flags | libc::O_RDWR | libc::O_CREAT,
                              libc::S_IRUSR | libc::S_IWUSR),
        };

        match FsRequest::open(self, path, flags as int, mode as int) {
            Ok(fs) => Ok(box fs as Box<rtio::RtioFileStream:Send>),
            Err(e) => Err(uv_error_to_io_error(e))
        }
    }

    fn fs_unlink(&mut self, path: &CString) -> Result<(), IoError> {
        let r = FsRequest::unlink(&self.loop_, path);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_lstat(&mut self, path: &CString) -> Result<FileStat, IoError> {
        let r = FsRequest::lstat(&self.loop_, path);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_stat(&mut self, path: &CString) -> Result<FileStat, IoError> {
        let r = FsRequest::stat(&self.loop_, path);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_mkdir(&mut self, path: &CString,
                perm: io::FilePermission) -> Result<(), IoError> {
        let r = FsRequest::mkdir(&self.loop_, path, perm.bits() as c_int);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_rmdir(&mut self, path: &CString) -> Result<(), IoError> {
        let r = FsRequest::rmdir(&self.loop_, path);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_rename(&mut self, path: &CString, to: &CString) -> Result<(), IoError> {
        let r = FsRequest::rename(&self.loop_, path, to);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_chmod(&mut self, path: &CString,
                perm: io::FilePermission) -> Result<(), IoError> {
        let r = FsRequest::chmod(&self.loop_, path, perm.bits() as c_int);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_readdir(&mut self, path: &CString, flags: c_int)
        -> Result<Vec<Path>, IoError>
    {
        let r = FsRequest::readdir(&self.loop_, path, flags);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_link(&mut self, src: &CString, dst: &CString) -> Result<(), IoError> {
        let r = FsRequest::link(&self.loop_, src, dst);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_symlink(&mut self, src: &CString, dst: &CString) -> Result<(), IoError> {
        let r = FsRequest::symlink(&self.loop_, src, dst);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_chown(&mut self, path: &CString, uid: int, gid: int) -> Result<(), IoError> {
        let r = FsRequest::chown(&self.loop_, path, uid, gid);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_readlink(&mut self, path: &CString) -> Result<Path, IoError> {
        let r = FsRequest::readlink(&self.loop_, path);
        r.map_err(uv_error_to_io_error)
    }
    fn fs_utime(&mut self, path: &CString, atime: u64, mtime: u64)
        -> Result<(), IoError>
    {
        let r = FsRequest::utime(&self.loop_, path, atime, mtime);
        r.map_err(uv_error_to_io_error)
    }

    fn spawn(&mut self, cfg: ProcessConfig)
            -> Result<(Box<rtio::RtioProcess:Send>,
                       Vec<Option<Box<rtio::RtioPipe:Send>>>),
                      IoError>
    {
        match Process::spawn(self, cfg) {
            Ok((p, io)) => {
                Ok((p as Box<rtio::RtioProcess:Send>,
                    io.move_iter().map(|i| i.map(|p| {
                        box p as Box<rtio::RtioPipe:Send>
                    })).collect()))
            }
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }

    fn kill(&mut self, pid: libc::pid_t, signum: int) -> Result<(), IoError> {
        Process::kill(pid, signum).map_err(uv_error_to_io_error)
    }

    fn unix_bind(&mut self, path: &CString)
                 -> Result<Box<rtio::RtioUnixListener:Send>, IoError> {
        match PipeListener::bind(self, path) {
            Ok(p) => Ok(p as Box<rtio::RtioUnixListener:Send>),
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }

    fn unix_connect(&mut self, path: &CString, timeout: Option<u64>)
                    -> Result<Box<rtio::RtioPipe:Send>, IoError> {
        match PipeWatcher::connect(self, path, timeout) {
            Ok(p) => Ok(box p as Box<rtio::RtioPipe:Send>),
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }

    fn tty_open(&mut self, fd: c_int, readable: bool)
            -> Result<Box<rtio::RtioTTY:Send>, IoError> {
        match TtyWatcher::new(self, fd, readable) {
            Ok(tty) => Ok(box tty as Box<rtio::RtioTTY:Send>),
            Err(e) => Err(uv_error_to_io_error(e))
        }
    }

    fn pipe_open(&mut self, fd: c_int)
                 -> Result<Box<rtio::RtioPipe:Send>, IoError> {
        match PipeWatcher::open(self, fd) {
            Ok(s) => Ok(box s as Box<rtio::RtioPipe:Send>),
            Err(e) => Err(uv_error_to_io_error(e))
        }
    }

    fn signal(&mut self, signum: Signum, channel: Sender<Signum>)
        -> Result<Box<rtio::RtioSignal:Send>, IoError> {
        match SignalWatcher::new(self, signum, channel) {
            Ok(s) => Ok(s as Box<rtio::RtioSignal:Send>),
            Err(e) => Err(uv_error_to_io_error(e)),
        }
    }
}