- 19 5月, 2008 11 次提交
-
-
由 Geert Uytterhoeven 提交于
Some input drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Some network drivers do not check whether they're actually running on the correct platform, causing multi-platform kernels to crash if they are not. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The Apollo frame buffer device driver (dnfb) doesn't check whether it's actually running on Apollo hardware, causing a crash if it isn't. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The Macintosh IDE driver (macide) doesn't check whether it's actually running on Mac hardware, causing a crash if it isn't. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
When running a HP300-enabled kernel on non-HP300 hardware, a test in the early startup code jumps to the wrong label, causing a double bus fault. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Use `__builtin_trap()' instead of `asm volatile("illegal")' in the m68k BUG() macros (as suggested by Andrew Pinski), to kill warnings in code that assumes BUG() does not return. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
m68k vme_scc: - make scc_ports[] static - kill unused global scc_initialized Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
The Hisoft Whippet PCMCIA serial driver has been removed a long time ago, but it's Kconfig symbol still existed. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Correct FB_HP300 dependencies: - FB_HP300 doesn't depend only on HP300, but also on DIO (which depends on HP300) - FB_HP300 does not need FB_CFB_FILLRECT Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
CONFIG_FB_DAFB is a leftover from pre-Kconfig Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geert Uytterhoeven 提交于
Convert access_ok() from a macro to an inline function, so the compiler no longer complains about unused variables: fs/read_write.c: In function 'rw_copy_check_uvector': fs/read_write.c:556: warning: unused variable 'buf' Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 5月, 2008 16 次提交
-
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: spitz wants PXA27x UDC definitions [ARM] pxa: fix pxafb build when cpufreq is enabled [ARM] fix parenthesis in include/asm-arm/arch-omap/control.h [ARM] colibri: fix support for DM9000 ethernet device [ARM] arm/kernel/arthur.c: add MODULE_LICENSE [ARM] 5037/1: Orion: fix DNS323/Kurobox Pro PCI initialisation [ARM] 5034/1: fix arm{925,926,940,946} dma_flush_range() in WT mode [ARM] export copy_page [ARM] 5026/1: locomo: add .settype for gpio and several small fixes ARM: OMAP: Fixed comments on global PRM register usage ARM: OMAP: Add PARENT_CONTROLS_CLOCK flag to dpll5_m2_ck ARM: OMAP: PRCM fixes to ssi clock handling ARM: OMAP: Add fuctional clock enabler for iva2 ARM: OMAP: Fix 34xx to use correct shift values for gpio2-6 fclks ARM: OMAP: Keymap fix for palmte and palmz71 ARM: OMAP: Fix Unbalanced enable for IRQ in omap mailbox ARM: OMAP: DMA: Fix incorrect channel linking ARM: OMAP: Warn on disabling clocks with no users ARM: OMAP: Add calls to omap2_set_globals_*() ARM: OMAP: Update MMC header to fix compile
-
由 Russell King 提交于
-
由 Russell King 提交于
... so include the header file. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
If cpufreq is enabled, pxafb wants to call the removed get_clk_frequency_khz() function for a debug printk. Remove this reference. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Mariusz Kozlowski 提交于
Parenthesis fix in include/asm-arm/arch-omap/control.h Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael Abbott 提交于
Two changes are necessary to enable proper operation of the DM9000 device with the Colibri PXA 270 board: firstly, the IRQ type needs to be configured for rising edge interrupts, and secondly this configuration needs to be communicated through to the DM9000. [akpm@linux-foundation.org: remove set_irq_type() call as per ben-linux request] Signed-off-by: NMichael Abbott <michael.abbott@diamond.ac.uk> Cc: Daniel Mack <daniel@caiaq.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Adrian Bunk 提交于
This patch adds the missing MODULE_LICENSE("GPL"). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
Whereas most Orion 5x machine support code would initialise the PCI subsystem with nr_controllers in their struct hw_pci set to 2, the DNS323 and Kurobox Pro machine support code had nr_controllers set to 1. This was presumably done because on those two machines, the PCI(-X) controller (nr == 1) isn't used, requiring initialisation of only the PCIe controller (nr == 0.) However, not initialising the PCI(-X) controller on boards that don't use it leads to a situation where both the PCIe and the PCI(-X) controller think that their root bus is zero, and it messes up IRQ assignment. This patch changes the DNS323 and Kurobox Pro support code to always use nr_controllers == 2. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Lennert Buytenhek 提交于
The CPU's dma_flush_range() operation needs to clean+invalidate the given memory area if the cache is in writeback mode, or do just the invalidate part if the cache is in writethrough mode, but the current proc-arm{925,926,940,946} (incorrectly) do a cache clean in the latter case. This patch fixes that. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Martin Michlmayr reported that fuse complains: ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! so export the needed function. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Thomas Kunze 提交于
irqs.h: * rename IRQ_LOCOMO_SPI_OVRN to IRQ_LOCOMO_SPI_REND locomo.h: * add some definition for locomo spi controller * correct some errors locomo.c: * correct some errors * add set_type for locomo gpio irq chip Signed-off-by: NThomas Kunze <thommycheck@gmx.de> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: disable mwait for AMD family 10H/11H CPUs x86: fix crash on cpu hotplug on pat-incapable machines x86: remove mwait capability C-state check
-
由 Thomas Gleixner 提交于
The previous revert of 0c07ee38 left out the mwait disable condition for AMD family 10H/11H CPUs. Andreas Herrman said: It depends on the CPU. For AMD CPUs that support MWAIT this is wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings then depend on a clock divisor and current Pstate of the core. If all cores of a processor are in halt state (C1) the processor can enter the C1E (C1 enhanced) state. If mwait is used this will never happen. Thus HLT saves more power than MWAIT here. It might be best to switch off the mwait flag for these AMD CPU families like it was introduced with commit f039b754 (x86: Don't use MWAIT on AMD Family 10) Re-add the AMD families 10H/11H check and disable the mwait usage for those. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Avi Kivity 提交于
pat_disable() is __init, which means it goes away after booting is complete. Unfortunately it is used by the hotplug code if the machine is not pat-capable, causing a crash. Fix by marking pat_disable() as __cpuinit. Signed-off-by: NAvi Kivity <avi@qumranet.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Vegard Nossum reports: | powertop shows between 200-400 wakeups/second with the description | "<kernel IPI>: Rescheduling interrupts" when all processors have load (e.g. | I need to run two busy-loops on my 2-CPU system for this to show up). | | The bisect resulted in this commit: | | commit 0c07ee38 | Date: Wed Jan 30 13:33:16 2008 +0100 | | x86: use the correct cpuid method to detect MWAIT support for C states remove the functional effects of this patch and make mwait unconditional. A future patch will turn off mwait on specific CPUs where that causes power to be wasted. Bisected-by: NVegard Nossum <vegard.nossum@gmail.com> Tested-by: NVegard Nossum <vegard.nossum@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 5月, 2008 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc64: Update defconfig. sparc64: Fix lmb_reserve() args in find_ramdisk().
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This fixes the missing ram regression reported by Mikael Pettersson <mikpe@it.uu.se>, much thanks for all of this help in diagnosing this. The second argument to lmb_reserve() is a size, not an end address bounds. Tested-by: NMikael Pettersson <mikpe@it.uu.se> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Use asm/byteorder.h instead. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 5月, 2008 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] macintosh: Replace deprecated __initcall with device_initcall [POWERPC] cell: Fix section mismatches in io-workarounds code [POWERPC] spufs: Fix compile error [POWERPC] Fix uninitialized variable bug in copy_{to|from}_user [POWERPC] Add null pointer check to of_find_property [POWERPC] vmemmap fixes to use smaller pages [POWERPC] spufs: Fix pointer reference in find_victim [POWERPC] 85xx: SBC8548 - Add flash support and HW Rev reporting [POWERPC] 85xx: Fix some sparse warnings for 85xx MDS [POWERPC] 83xx: Enable DMA engine on the MPC8377 MDS board. [POWERPC] 86xx: mpc8610_hpcd: fix second serial port [POWERPC] 86xx: mpc8610_hpcd: add support for NOR and NAND flashes [POWERPC] 85xx: Add 8568 PHY workarounds to board code [POWERPC] 86xx: mpc8610_hpcd: use ULI526X driver for on-board ethernet
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: update transaction t_state to T_COMMIT fix ext4: Retry block allocation if new blocks are allocated from system zone. ext4: mballoc fix mb_normalize_request algorithm for 1KB block size filesystems ext4: fix typos in messages and comments (journalled -> journaled) ext4: fix synchronization of quota files in journal=data mode ext4: Fix mount messages when quota disabled ext4: correct mount option parsing to detect when quota options can be changed
-
由 Cyrill Gorcunov 提交于
This patch fixes a build bug on m68k - gcc decides to emit a call to the strlen library function, which we don't implement. More importantly - my previous patch "init: don't lose initcall return values" (commit e662e1cf) had introduced potential buffer overflow by wrong calculation of string accumulator size. Use strlcat() instead, fixing both bugs. Many thanks Andreas Schwab and Geert Uytterhoeven for helping to catch and fix the bug. Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
One function to just loop over the entries, one function to actually do the call and the associated debugging code. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix personality(PER_LINUX32) performance issue [IA64] Properly unregister legacy interrupts [IA64] Remove NULL pointer check for argument never passed as NULL. [IA64] trivial cleanup for perfmon.c [IA64] trivial cleanup for entry.S [IA64] fix interrupt masking for pending works on kernel leave [IA64] allow user to force_pal_cache_flush [IA64] Don't reserve crashkernel memory > 4 GB [IA64] machvec support for SGI UV platform [IA64] Add header files for SGI UV platform
-
由 Mingming Cao 提交于
Updating the current transaction's t_state is protected by j_state_lock. We need to do the same when updating the t_state to T_COMMIT. Acked-by: NJan Kara <jack@suse.cz> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
If the block allocator gets blocks out of system zone ext4 calls ext4_error. But if the file system is mounted with errors=continue retry block allocation. We need to mark the system zone blocks as in use to make sure retry don't pick them again System zone is the block range mapping block bitmap, inode bitmap and inode table. Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NMingming Cao <cmm@us.ibm.com> Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
-
由 Ingo Molnar 提交于
Enabling the BKL to be lockdep tracked uncovered the following upstream kernel bug in the tty code, which caused a BKL reference leak: ================================================ [ BUG: lock held when returning to user space! ] ------------------------------------------------ dmesg/3121 is leaving the kernel with locks still held! 1 lock held by dmesg/3121: #0: (kernel_mutex){--..}, at: [<c02f34d9>] opost+0x24/0x194 this might explain some of the atomicity warnings and crashes that -tip tree testing has been experiencing since the BKL was converted back to a spinlock. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-