- 06 8月, 2014 3 次提交
-
-
由 Chris Wilson 提交于
i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
由 Daniel Vetter 提交于
In drm/i915 we want to get at the video= cmdline modes even when we don't have fbdev support enabled, so that users can always override the kernel's initial mode selection. But that gives us a direct depency upon the parsing code in the fbdev subsystem. Since it's so little code just extract these 2 functions and always build them in. Whiel at it fix the checkpatch fail in this code. v2: Also move fb_mode_option. Spotted by the kbuild. v3: Review from Geert: - Keep the old copyright notice from fb_mem.c, although I have no idea what exactly applies. - Only compile this when needed. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-fbdev@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> -- I prefer if we can merge this through drm-next since we'll use it there in follow-up patches. -Daniel
-
由 Daniel Vetter 提交于
The current refcounting scheme is that the fb lookup idr also holds a reference. This works out nicely bacause thus far we've always explicitly cleaned up idr entries for framebuffers: - Userspace fbs get removed in the rmfb ioctl or when the drm file gets closed. - Kernel fbs (for fbdev emulation) get cleaned up by the driver code at module unload time. But now i915 also reconstructs the bios fbs for a smooth transition. And that fb is purely transitional and should get removed immmediately once all crtcs stop using it. Of course if the i915 fbdev code decides to reuse it as the main fbdev fb then it shouldn't be cleaned up, but in that case the fbdev code will grab it's own reference. The problem is now that we also want to register that takeover fb in the idr, so that userspace can do a smooth transition (animated maybe even!) itself. But currently we have no one who will clean up the idr reference once that fb isn't useful any more, and so essentially leak it. Fix this by no longer holding a full fb reference for the idr, but instead just have a weak reference using kref_get_unless_zero. But that requires us to synchronize and clean up with the idr and fb_lock in drm_framebuffer_free, so add that. It's a bit ugly that we have to unconditionally grab the fb_lock, but without that someone might creep through a race. This leak was caught by the fb leak check in drm_mode_config_cleanup. Originally the leak was introduced in commit 46f297fb Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Fri Mar 7 08:57:48 2014 -0800 drm/i915: add plane_config fetching infrastructure v2 Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77511Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 05 8月, 2014 13 次提交
-
-
由 Daniel Vetter 提交于
In my review of commit 98f75de4 Author: Rob Clark <robdclark@gmail.com> Date: Fri May 30 11:37:03 2014 -0400 drm: add object property typ I asked for a check to make sure that we never leak an fb from the generic mode object lookup since those have completely different lifetime rules. Rob added it, but outside of the idr mutex, which means that our dereference of obj->type can already chase free'd memory. Somehow I didn't spot this, so fix this asap. v2: Simplify the conditionals as suggested by Chris. Cc: Rob Clark <robdclark@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NRob Clark <robdclark@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
In order to prevent external observers walking the list of open DRM files from seeing an invalid drm_file_private in the process of being torndown, the first operation we need to take is to unlink the drm_file_private from that list. general protection fault: 0000 [#1] PREEMPT SMP Modules linked in: i915 i2c_algo_bit drm_kms_helper drm lpc_ich mfd_core nls_iso8859_1 i2c_hid video hid_generic usbhid hid e1000e ahci ptp libahci pps_core CPU: 3 PID: 8220 Comm: cat Not tainted 3.16.0-rc6+ #4 Hardware name: Intel Corporation Shark Bay Client platform/WhiteTip Mountain 1, BIOS HSWLPTU1.86C.0119.R00.1303230105 03/23/2013 task: ffff8800219642c0 ti: ffff880047024000 task.ti: ffff880047024000 RIP: 0010:[<ffffffffa0137c70>] [<ffffffffa0137c70>] per_file_stats+0x110/0x160 [i915] RSP: 0018:ffff880047027d48 EFLAGS: 00010246 RAX: 6b6b6b6b6b6b6b6b RBX: ffff880047027e30 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88003a05cd00 RBP: ffff880047027d58 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8800219642c0 R11: 0000000000000000 R12: ffff88003a05cd00 R13: 0000000000000000 R14: ffff88003a05cd00 R15: ffff880047027d88 FS: 00007f5f73a13740(0000) GS:ffff88014e380000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000023ff038 CR3: 0000000021a4b000 CR4: 00000000001407e0 Stack: 0000000000000001 000000000000ffff ffff880047027dc8 ffffffff813438e4 ffff880047027e30 ffffffffa0137b60 ffff880021a8af58 ffff880021a8f1a0 ffff8800a2061fb0 ffff8800a2062048 ffff8800a2061fb0 ffff8800a1e23478 Call Trace: [<ffffffff813438e4>] idr_for_each+0xf4/0x180 [<ffffffffa0137b60>] ? i915_gem_stolen_list_info+0x1f0/0x1f0 [i915] [<ffffffffa013a17a>] i915_gem_object_info+0x5ca/0x6a0 [i915] [<ffffffff81193ec5>] seq_read+0xf5/0x3a0 [<ffffffff8116d950>] vfs_read+0x90/0x150 [<ffffffff8116e509>] SyS_read+0x49/0xb0 [<ffffffff815d8622>] tracesys+0xd0/0xd5 Code: 01 00 00 49 39 84 24 08 01 00 00 74 55 49 8b 84 24 b8 00 00 00 48 01 43 18 31 c0 5b 41 5c 5d c3 0f 1f 00 49 8b 44 24 08 4c 89 e7 <48> 8b 70 28 48 81 c6 48 80 00 00 e8 80 14 01 00 84 c0 74 bc 49 RIP [<ffffffffa0137c70>] per_file_stats+0x110/0x160 [i915] RSP <ffff880047027d48> Reported-by: N"Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81712Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tetsuo Handa 提交于
Commit 7dc19d5a "drivers: convert shrinkers to new count/scan API" added deadlock warnings that ttm_page_pool_free() and ttm_dma_page_pool_free() are currently doing GFP_KERNEL allocation. But these functions did not get updated to receive gfp_t argument. This patch explicitly passes sc->gfp_mask or GFP_KERNEL to these functions, and removes the deadlock warning. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tetsuo Handa 提交于
While ttm_dma_pool_shrink_scan() tries to take mutex before doing GFP_KERNEL allocation, ttm_pool_shrink_scan() does not do it. This can result in stack overflow if kmalloc() in ttm_page_pool_free() triggered recursion due to memory pressure. shrink_slab() => ttm_pool_shrink_scan() => ttm_page_pool_free() => kmalloc(GFP_KERNEL) => shrink_slab() => ttm_pool_shrink_scan() => ttm_page_pool_free() => kmalloc(GFP_KERNEL) Change ttm_pool_shrink_scan() to do like ttm_dma_pool_shrink_scan() does. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [2.6.35+] Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tetsuo Handa 提交于
I can observe that RHEL7 environment stalls with 100% CPU usage when a certain type of memory pressure is given. While the shrinker functions are called by shrink_slab() before the OOM killer is triggered, the stall lasts for many minutes. One of reasons of this stall is that ttm_dma_pool_shrink_count()/ttm_dma_pool_shrink_scan() are called and are blocked at mutex_lock(&_manager->lock). GFP_KERNEL allocation with _manager->lock held causes someone (including kswapd) to deadlock when these functions are called due to memory pressure. This patch changes "mutex_lock();" to "if (!mutex_trylock()) return ...;" in order to avoid deadlock. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [3.3+] Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tetsuo Handa 提交于
We can use "unsigned int" instead of "atomic_t" by updating start_pool variable under _manager->lock. This patch will make it possible to avoid skipping when choosing a pool to shrink in round-robin style, after next patch changes mutex_lock(_manager->lock) to !mutex_trylock(_manager->lork). Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [3.3+] Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Tetsuo Handa 提交于
list_empty(&_manager->pools) being false before taking _manager->lock does not guarantee that _manager->npools != 0 after taking _manager->lock because _manager->npools is updated under _manager->lock. Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@kernel.org> [3.3+] Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-next This series of patches add the support of DRM/KMS drivers for STMicroelectronics chipsets stih416 and stih407. Hardware is split in two main blocks: Compositor and TVout. Each of them includes specific hardware IPs and the display timing are controlled by a specific Video Timing Generator hardware IP (VTG). Compositor is made of the follow hardware IPs: - GDP (Generic Display Pipeline) which is an entry point for graphic (RGB) buffers - VDP (Video Diplay Pipeline) which is an entry point for video (YUV) buffers - HQVDP (High Quality Video Display Processor) that supports scaling, deinterlacing and some miscellaneous image quality improvements. It fetches the Video decoded buffers from memory, processes them and pushes them to the Compositor through a HW dedicated bus. - Mixer is responsible of mixing all the entries depending of their respective z-order and layout TVout is divided in 3 parts: - HDMI to generate HDMI signals, depending of chipset version HDMI phy can change. - HDA to generate signals for HD analog TV - VIP to control/switch data path coming from Compositor On stih416 compositor and Tvout are on different dies so a Video Trafic Advance inter-die Communication mechanism (VTAC) is needed. +---------------------------------------------+ +----------------------------------------+ | +-------------------------------+ +----+ | | +----+ +--------------------------+ | | | | | | | | | | | +---------+ +----+ | | | | +----+ +------+ | | | | | | | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | | | | | | | +----+ | | | | +----+ |Mixer |--|-->| | | | | |---|->| switcher| | | | | | | | | | | | | | | | | +----+ | | | | | | | | | | | | | | | |---->|HDA | | | | | +------+ | |VTAC|========>|VTAC| | +---------+ +----+ | | | | | | | | | | | | | | | | Compositor | | | | | | | | TVout | | | +-------------------------------+ | | | | | | +--------------------------+ | | ^ | | | | | | ^ | | | | | | | | | | | | +--------------+ | | | | | | +-------------+ | | | VTG (master) |----->| | | | | |----->| VTG (slave) | | | +--------------+ +----+ | | +----+ +-------------+ | |Digital die | | Analog Die| +---------------------------------------------+ +----------------------------------------+ On stih407 Compositor and Tvout are on the same die +-----------------------------------------------------------------+ | +-------------------------------+ +--------------------------+ | | | | | +---------+ +----+ | | | | +----+ +------+ | | | VIP |---->|HDMI| | | | | |GPD +------------->| | | | | | +----+ | | | | +----+ |Mixer |--|--|->| switcher| | | | | +----+ +-----+ | | | | | | +----+ | | | | |VDP +-->+HQVDP+--->| | | | | |---->|HDA | | | | | +----+ +-----+ +------+ | | +---------+ +----+ | | | | | | | | | | Compositor | | TVout | | | +-------------------------------+ +--------------------------+ | | ^ ^ | | | | | | +--------------+ | | | VTG | | | +--------------+ | |Digital die | +-----------------------------------------------------------------+ In addition of the drivers for the IPs listed before a thin I2C driver (hdmiddc) is used by HDMI driver to retrieve EDID for monitor. To unify interfaces of GDP and VDP we create a "layer" interface called by compositor to control both GPD and VDP. Hardware have memory contraints (alignment, contiguous) so we use CMA drm helpers functions to allocate frame buffer. File naming convention is: - sti_* for IPs drivers - sti_drm_* for drm functions implementation. * 'drm_kms_for_next-v8' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: Add DRM driver itself drm: sti: add Compositor drm: sti: add Mixer drm: sti: add VID layer drm: sti: add GDP layer drm: sti: add TVOut driver drm: sti: add HDA driver drm: sti: add HDMI driver drm: sti: add VTAC drivers drm: sti: add VTG driver drm: sti: add bindings for DRM driver
-
git://ftp.arm.linux.org.uk/~rmk/linux-cubox由 Dave Airlie 提交于
This builds upon the previous set of fixes which were pulled on 6th July. Included in this set are: - an update from Jean-Francois to add the missing reg documentation entry to the device tree documentation. - conversion of the tda998x driver to the component helpers. * 'tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-cubox: drm/i2c: tda998x: add component support drm/i2c: tda998x: allow re-use of tda998x support code drm/i2c: tda998x: fix lack of required reg in DT documentation Conflicts: drivers/gpu/drm/i2c/tda998x_drv.c
-
git://people.freedesktop.org/~robclark/linux由 Dave Airlie 提交于
This time around we have a mix of new hw enablement (mdp5 v1.3 / apq8084), plus devicetree and various upstream changes (mostly adapting to CCF vs downstream clk driver differences) for mdp4 / apq8064. With these drm/msm patches plus a few other small patchsets (from linaro qcom integration branch.. mostly stuff queued up for 3.17) we have the inforce ifc6410 board working, with gpu. Much nicer to work with than ancient vendor android branch :-) * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo drm/msm/hdmi: enable lpm-mux if it is present drm/msm/mdp5: add support for MDP5 v1.3 drm/msm: fix potential deadlock in gpu init drm/msm: use upstream iommu drm/msm: no mmu is only error if not using vram carveout drm/msm: fix BUG_ON() in error cleanup path drm/msm/mdp4: add mdp axi clk drm/msm: hdmi phy 8960 phy pll drm/msm: update generated headers drm/msm: DT support for 8960/8064 (v3) drm/msm: Implement msm drm fb_mmap callback function drm/msm: activate iommu support drm/msm: fix double struct_mutex acquire
-
由 Dave Airlie 提交于
Linux 3.16 backmerge requested by i915, nouveau and radeon authors Conflicts: drivers/gpu/drm/i915/i915_gem_render_state.c drivers/gpu/drm/i915/intel_drv.h
-
- 04 8月, 2014 24 次提交
-
-
由 Beeresh Gopal 提交于
HDMI_MUX_EN gpio is requested. If an error occurs, the same name should be printed (HDMI_MUX_EN) instead of HDMI_MUX_SEL (typo). Signed-off-by: NBeeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: NStephane Viau <sviau@codeaurora.org> Reviewed-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Beeresh Gopal 提交于
lpm-mux is programmed to enable HDMI connector on the docking station for S805 chipset based devices. Signed-off-by: NBeeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Stephane Viau 提交于
MDP5 has several functional blocks (ie: VIG/RGB pipes, LMs, ...). From one revision to another, these blocks' base addresses might change due to the number of instances present in the MDP5 hw. A way of dealing with these offset changes is to introduce dynamic offsets 'per block'. This change adds support for the new revision of MDP5: v1.3. The idea is to define one hw config per MDP version and select either one of them at runtime, after reading the MDP5 version. Once the MDP version is known, 'per block' dynamic offsets are initialized through a global pointer, which is then used for read/write register access. Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Somewhere along the way, the firmware loader sprouted another lock dependency, resulting in possible deadlock scenario: &dev->struct_mutex --> &sb->s_type->i_mutex_key#2 --> &mm->mmap_sem which is problematic vs things like gem mmap. So introduce a separate mutex to synchronize gpu init. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Downstream kernel IOMMU had a non-standard way of dealing with multiple devices and multiple ports/contexts. We don't need that on upstream kernel, so rip out the crazy. Note that we have to move the pinning of the ringbuffer to after the IOMMU is attached. No idea how that managed to work properly on the downstream kernel. For now, I am leaving the IOMMU port name stuff in place, to simplify things for folks trying to backport latest drm/msm to device kernels. Once we no longer have to care about pre-DT kernels, we can drop this and instead backport upstream IOMMU driver. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Downstream kernel holds this clk via a fake-parent relationship. Upstream clock framework requires that we hold it explicitly. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
On downstream kernel the clk driver directly bangs hdmi phy registers. For upstream kernel, we need to model this as a clock and register with the clock framework. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Now that we (almost) have enough dependencies in place (MMCC, RPM, etc), add necessary DT support so that we can use drm/msm on upstream kernel. v2: update for review comments v3: rebase on component helper changes Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Hai Li 提交于
This change implements msm drm specific fb_mmap function for fb device to properly map the fb address to userspace. Signed-off-by: NHai Li <hali@codeaurora.org> Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> (+ minor comment tweak)
-
由 Stephane Viau 提交于
This changes activates the iommu support for MDP5, through the platform config structure. Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Rob Clark 提交于
Mutex is already grabbed in show_locked().. somehow this slipped through. Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel into drm-next Final feature pull for 3.17. drm-intel-next-2014-07-25: - Ditch UMS support (well just the config option for now) - Prep work for future platforms (Sonika Jindal, Damien) - runtime pm/soix fixes (Paulo, Jesse) - psr tracking improvements, locking fixes, now enabled by default! - rps fixes for chv (Deepak, Ville) - drm core patches for rotation support (Ville, Sagar Kamble) - the i915 parts unfortunately didn't make it yet - userptr fixes (Chris) - minimum backlight brightness (Jani), acked long ago by Matthew Garret on irc - I've forgotten about this patch :( QA is a bit unhappy about the DP MST stuff since it broke hpd testing a bit, but otherwise looks sane. I've backmerged drm-next to resolve conflicts with the mst stuff, which means the new tag itself doesn't contain the overview as usual. * tag 'drm-intel-next-2014-07-25-merged' of git://anongit.freedesktop.org/drm-intel: (75 commits) drm/i915/userptr: Keep spin_lock/unlock in the same block drm/i915: Allow overlapping userptr objects drm/i915: Ditch UMS config option drm/i915: respect the VBT minimum backlight brightness drm/i915: extract backlight minimum brightness from VBT drm/i915: Replace HAS_PCH_SPLIT which incorrectly lets some platforms in drm/i915: Returning from increase/decrease of pllclock when invalid drm/i915: Setting legacy palette correctly for different platforms drm/i915: Avoid incorrect returning for some platforms drm/i915: Writing proper check for reading of pipe status reg drm/i915: Returning the right VGA control reg for platforms drm/i915: Allowing changing of wm latencies for valid platforms drm/i915: Adding HAS_GMCH_DISPLAY macro drm/i915: Fix possible overflow when recording semaphore states. drm/i915: Do not unmap object unless no other VMAs reference it drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disable drm/i915: Reorder ctx unref on ppgtt cleanup drm/i915/error: Check the potential ctx obj's vm drm/i915: Fix printing proper min/min/rpe values in debugfs drm/i915: BDW can also detect unclaimed registers ...
-
由 Dave Airlie 提交于
Daniel pointed out with hotplug that userspace could be trying to oops us as root for lols, and that to be correct we shouldn't register the object with the idr before we have fully set the connector object up. His proposed solution was a lot more life changing, this seemed like a simpler proposition to me, get the connector object id from the idr, but don't register the object until the drm_connector_register callback. The open question is whether the drm_mode_object_register needs a bigger lock than just the idr one, but I can't see why it would, but I can be locking challenged. v2: fix bool noreg into sane - add comment. Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Chris Wilson 提交于
On HSW+, the digital encoders are shared between HDMI and DP outputs, with one encoder masquerading as both. The VBT should tell us if we need to have DP or HDMI support on a particular port, but if we don't have DP support and we enable the DP hpd pulse handler then we cause an oops. Don't hook up the DP hpd handling if we don't have a DP port. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81856 Reported-by: Intel QA Team. Signed-off-by: Dave Airlie <airlied@redhat.com> # v1 [ickle: Fix the error handling after a malloc failure] Reviewed-by: NDave Airlie <airlied@redhat.com> Cc: Paulo Zanoni <przanoni@gmail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next This pull request includes i80 interface support, module auto-loading ipp consolidation, and trivail fixups and cleanups. Summary: - Add i80 interface support. For this, we added some features to Exynos drm framework, which don't affect any other SoC and common framework because they are specific to Exynos drm. - Add module auto-loading support. For this, sub drivers of Exynos drm exports their of match tables to userspace. This allows modules to be loaded automatically based on devicetree information - Consolidate ipp driver. This patch just just includes cleanups and a littl bit refactoring codes. If there is any problem, please kindly let me know. * 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (38 commits) drm/exynos: g2d: let exynos_g2d_get_ver_ioctl fail drm/exynos: g2d: make ioctls more robust drm/exynos: hdmi: add null check for hdmiphy_port drm/exynos: control blending of mixer graphic layer 0 drm/exynos: Add MODULE_DEVICE_TABLE entries for various components Subject: Revert "drm/exynos: remove MODULE_DEVICE_TABLE definitions" Subject: Revert "drm/exynos: fix module build error" drm/exynos/ipp: simplify ipp_find_driver drm/exynos/ipp: simplify ipp_create_id drm/exynos/ipp: remove redundant messages drm/exynos/ipp: simplify ipp_find_obj drm/exynos/ipp: remove useless registration checks drm/exynos/ipp: simplify memory check function drm/exynos/ipp: remove incorrect checks of list_first_entry result drm/exynos/ipp: remove temporary variable drm/exynos/ipp: correct address type drm/exynos/ipp: remove struct exynos_drm_ipp_private drm/exynos/ipp: remove unused field from exynos_drm_ipp_private drm/exynos/ipp: remove type casting drm/exynos: g2d: add exynos4212 as a compatible device. ...
-
由 Tobias Jakobi 提交于
Currently the DRM_IOCTL_EXYNOS_G2D_GET_VER ioctl always succeeds, even if no G2D support is available. Let the ioctl fail when this is the case, so that userspace can accurately probe for G2D support. This also fixes the exynos tests in libdrm. There 'g2d_init' doesn't fail when G2D is absent, leading to a segfault later. Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NINki Dae <inki.dae@samsung.com>
-
由 Tobias Jakobi 提交于
Both exynos_g2d_set_cmdlist_ioctl and exynos_g2d_exec_ioctl don't check if the G2D was succesfully probe. If that is not the case, then g2d_priv is just NULL and extracting 'dev' from it in the next step is going to produce a kernel oops. Add proper checks and return ENODEV if the G2D is not available. Signed-off-by: NTobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: NINki Dae <inki.dae@samsung.com>
-
由 Seung-Woo Kim 提交于
The hdmiphy can be apb and hdmiphy_port can be null. So before accessing hdmiphy_port, it should be checked. Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Joonyoung Shim 提交于
The mixer graphic layer 0 isn't blended as default by commit 0377f4ed(drm/exynos: Don't blend mixer layer 0). But it needs to be blended with graphic layer 0 if video layer is enabled by vp because video layer is bottom. Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sjoerd Simons 提交于
Add MODULE_DEVICE_TABLE calls for the various OF match tables that currently don't have one. This allows the module to be autoloaded based on devicetree information. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Sjoerd Simons 提交于
This reverts commit d0896218 was original to prevent multiple MODULE_DEVICE_TABLE in one module. Which, as a side-effect broke autoloading of the module. Since 21bdd17b it is possible to have multiple calls to MODULE_DEVICE_TABLE, so the patch can be reverted to restore support for autoloading Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-