- 23 7月, 2013 1 次提交
-
-
由 Jingoo Han 提交于
The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 22 7月, 2013 2 次提交
-
-
由 Jiri Kosina 提交于
27ce4050 ("HID: fix data access in implement()") by mistake removed a setting of buffer size in hidp. Fix that by putting it back. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
implement() is setting bytes in LE data stream. In case the data is not aligned to 64bits, it reads past the allocated buffer. It doesn't really change any value there (it's properly bitmasked), but in case that this read past the boundary hits a page boundary, pagefault happens when accessing 64bits of 'x' in implement(), and kernel oopses. This happens much more often when numbered reports are in use, as the initial 8bit skip in the buffer makes the whole process work on values which are not aligned to 64bits. This problem dates back to attempts in 2005 and 2006 to make implement() and extract() as generic as possible, and even back then the problem was realized by Adam Kroperlin, but falsely assumed to be impossible to cause any harm: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg47690.html I have made several attempts at fixing it "on the spot" directly in implement(), but the results were horrible; the special casing for processing last 64bit chunk and switching to different math makes it unreadable mess. I therefore took a path to allocate a few bytes more which will never make it into final report, but are there as a cushion for all the 64bit math operations happening in implement() and extract(). All callers of hid_output_report() are converted at the same time to allocate the buffer by newly introduced hid_alloc_report_buf() helper. Bruno noticed that the whole raw_size test can be dropped as well, as hid_alloc_report_buf() makes sure that the buffer is always of a proper size. Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 15 7月, 2013 1 次提交
-
-
由 Benjamin Tissoires 提交于
Genius Gx Imperator Keyboard presents the same problem in its report descriptors than Genius Gila Gaming Mouse. Use the same fixup for both. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=928561Reported-and-tested-by: NHonza Brazdil <jbrazdil@redhat.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 13 7月, 2013 1 次提交
-
-
由 Paul Chavent 提交于
When device with the DELIMITER tag in its report descriptor is encountered during parsing, it's mistakenly immediately refused by HID core for no justifiable reason. [jkosina@suse.cz: polish changelog] Signed-off-by: NPaul Chavent <paul.chavent@onera.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 05 7月, 2013 15 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID updates from Jiri Kosina: - HID battery handling cleanup by David Herrmann - ELO 4000/4500 driver, which has been finally ported to be proper HID driver by Jiri Slaby - ps3remote driver functionality is now provided by generic sony driver, by Jiri Kosina - PS2/3 Buzz controllers support, by Colin Leitner - rework of wiimote driver including full extensions hotpluggin support, sub-device modularization and speaker support by David Herrmann * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (55 commits) HID: wacom: Intuos4 battery charging changes HID: i2c-hid: support sending HID output reports using the output register HID: kye: Add report fixup for Genius Gila Gaming mouse HID: wiimote: support Nintendo Wii U Pro Controller Input: make gamepad API keycodes more clear input: document gamepad API and add extra keycodes HID: explain out-of-range check better HID: fix false positive out of range values HID: wiimote: fix coccinelle warnings HID: roccat: check cdev_add return value HID: fold ps3remote driver into generic Sony driver HID: hyperv: convert alloc+memcpy to memdup HID: core: fix reporting of raw events HID: wiimote: discard invalid EXT data reports HID: wiimote: fix classic controller parsing HID: wiimote: init EXT/MP during device detection HID: wiimote: fix DRM debug-attr to correctly parse input HID: wiimote: add MP quirks HID: wiimote: remove old static extension support HID: wiimote: add "bboard_calib" attribute ...
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull md updates from NeilBrown: "Mostly fixes, with a few minor features (eg 'last_sync_action' sysfs file) A couple marked for -stable including one recent bug which causes a RAID10 reshape to complete without moving any data :-( A couple more bugfixes (at least) to come, but haven't confirmed the right solution yet." * tag 'md-3.11' of git://neil.brown.name/md: md/raid10: fix bug which causes all RAID10 reshapes to move no data. md/raid5: allow 5-device RAID6 to be reshaped to 4-device. md/raid10: fix two bugs affecting RAID10 reshape. md: remove doubled description for sync_max, merging it within sync_min/sync_max MD: Remember the last sync operation that was performed md: fix buglet in RAID5 -> RAID0 conversion. md/raid10: check In_sync flag in 'enough()'. md/raid10: locking changes for 'enough()'. md: replace strict_strto*() with kstrto*() md: Wait for md_check_recovery before attempting device removal. dm-raid: silence compiler warning on rebuilds_per_group. DM RAID: Fix raid_resume not reviving failed devices in all cases DM RAID: Break-up untidy function DM RAID: Add ability to restore transiently failed devices on resume
-
由 Linus Torvalds 提交于
Merge Kconfig menu diet patches from Dave Hansen: "I think the "Kernel Hacking" menu has gotten a bit out of hand. It is over 120 lines long on my system with everything enabled and options are scattered around it haphazardly. http://sr71.net/~dave/linux/kconfig-horror.png Let's try to introduce some sanity. This set takes that 120 lines down to 55 and makes it vastly easier to find some things. It's a start. This set stands on its own, but there is plenty of room for follow-up patches. The arch-specific debug options still end up getting stuck in the top-level "kernel hacking" menu. OPTIMIZE_INLINING, for instance, could obviously go in to the "compiler options" menu, but the fact that it is defined in arch/ in a separate Kconfig file keeps it on its own for the moment. The Signed-off-by's in here look funky. I changed employers while working on this set, so I have signoffs from both email addresses" * emailed patches from Dave Hansen <dave@sr71.net>: hang and lockup detection menu kconfig: consolidate printk options group locking debugging options consolidate compilation option configs consolidate runtime testing configs order memory debugging Kconfig options consolidate per-arch stack overflow debugging options
-
由 Dave Hansen 提交于
The hard/softlockup and hung-task entries take up 6 lines of screen real-estate when enabled. I bet folks don't mess with these _that_ often, so move them in a group down a level. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Same deal, take the printk-related things and hide them in a menu. This takes another 4 items out of the top-level menu. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184208.D9E5804D@kernel.stglabs.ibm.com There are quite a few of these, and we want to make sure that there is one-stop-shopping for lock debugging. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original Post: http://lkml.kernel.org/r/20121214184207.6E00DDEC@kernel.stglabs.ibm.com Again, trying to come up with some common themes of the stuff in the kernel hacking menu... There are quite a few options to tweak compilation in some way, or perform extra compile-time checks. Give them their own menu. The diff here looks a bit funny... makes it look like I'm moving debugfs even though I'm actually moving the options on either side of it. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184206.FC11422F@kernel.stglabs.ibm.com These runtime tests are great, except that there are a lot of them, and they are very rarely needed. Give them their own menu so that only the folks who need them will have to go looking for them. Note that there are some other runtime tests that are not in here, like for RCU or locking. This menu should only be used for tests that do not have a more appropriate home. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184203.37E6C724@kernel.stglabs.ibm.com There are a *LOT* of memory debugging options. They are just scattered all over the "Kernel Hacking" menu. Sure, "memory debugging" is a very vague term and it's going to be hard to make absolute rules about what goes in here, but this has to be better than what we had before. This does, however, leave out the architecture-specific memory debugging options (like x86's DEBUG_SET_MODULE_RONX). There would need to be some substantial changes to move those in here. Kconfig can not easily mix arch-specific and generic options together: it really requires a file per-architecture, and I think having an arch/foo/Kconfig.debug-memory might be taking things a bit too far Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Hansen 提交于
Original posting: http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com Several architectures have similar stack debugging config options. They all pretty much do the same thing, some with slightly differing help text. This patch changes the architectures to instead enable a Kconfig boolean, and then use that boolean in the generic Kconfig.debug to present the actual menu option. This removes a bunch of duplication and adds consistency across arches. Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile] Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Merge hpfs patches from Mikulas Patocka. * emailed patches from Mikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz>: hpfs: implement prefetch to improve performance hpfs: use mpage hpfs: better test for errors
-
由 Mikulas Patocka 提交于
This patch implements prefetch to improve performance. It helps mostly when scanning the bitmaps to calculate free space. Signed-off-by: NMikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Use the mpage interface to improve performance. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
The test if bitmap access is out of bound could errorneously pass if the device size is divisible by 16384 sectors and we are asking for one bitmap after the end. Check for invalid size in the superblock. Invalid size could cause integer overflows in the rest of the code. Signed-off-by: NMikulas Patocka <mpatocka@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc changes for the 3.11 merge window. In addition to the usual bug fixes and small updates, the main highlights are: - Support for transparent huge pages by Aneesh Kumar for 64-bit server processors. This allows the use of 16M pages as transparent huge pages on kernels compiled with a 64K base page size. - Base VFIO support for KVM on power by Alexey Kardashevskiy - Wiring up of our nvram to the pstore infrastructure, including putting compressed oopses in there by Aruna Balakrishnaiah - Move, rework and improve our "EEH" (basically PCI error handling and recovery) infrastructure. It is no longer specific to pseries but is now usable by the new "powernv" platform as well (no hypervisor) by Gavin Shan. - I fixed some bugs in our math-emu instruction decoding and made it usable to emulate some optional FP instructions on processors with hard FP that lack them (such as fsqrt on Freescale embedded processors). - Support for Power8 "Event Based Branch" facility by Michael Ellerman. This facility allows what is basically "userspace interrupts" for performance monitor events. - A bunch of Transactional Memory vs. Signals bug fixes and HW breakpoint/watchpoint fixes by Michael Neuling. And more ... I appologize in advance if I've failed to highlight something that somebody deemed worth it." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits) pstore: Add hsize argument in write_buf call of pstore_ftrace_call powerpc/fsl: add MPIC timer wakeup support powerpc/mpic: create mpic subsystem object powerpc/mpic: add global timer support powerpc/mpic: add irq_set_wake support powerpc/85xx: enable coreint for all the 64bit boards powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig powerpc/mpic: Add get_version API both for internal and external use powerpc: Handle both new style and old style reserve maps powerpc/hw_brk: Fix off by one error when validating DAWR region end powerpc/pseries: Support compression of oops text via pstore powerpc/pseries: Re-organise the oops compression code pstore: Pass header size in the pstore write callback powerpc/powernv: Fix iommu initialization again powerpc/pseries: Inform the hypervisor we are using EBB regs powerpc/perf: Add power8 EBB support powerpc/perf: Core EBB support for 64-bit book3s powerpc/perf: Drop MMCRA from thread_struct powerpc/perf: Don't enable if we have zero events ...
-
- 04 7月, 2013 20 次提交
-
-
由 Jiri Kosina 提交于
-
由 Przemo Firszt 提交于
Intuos4 WL is separately reporting power supply and battery charging status - now hid-wacom is using that information. Previously hid-wacom was wrongly treating "battery charging" bit as "power supply connected". Now it should report battery charging, battery discharging, battery full and power supply status. Intuos4 WL sends reports when is in use (obvious) and when unplugging power supply. If means that if the device is being charged, but it's not being used it will never report "battery full". The same problem happens after the device has been connected, but it's not in use - the battery/ac status will be incorrect. Currently there is no mechanism to ask the device to send a report containing battery/ac status. Signed-off-by: NPrzemo Firszt <przemo@firszt.eu> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Jiri Kosina 提交于
Conflicts: drivers/hid/hid-core.c
-
由 Jiri Kosina 提交于
Merge branches 'for-3.11/battery', 'for-3.11/elo', 'for-3.11/holtek' and 'for-3.11/i2c-hid-fixed' into for-linus
-
由 Andrew Duggan 提交于
The current i2c hid driver does not support sending HID output reports using the output register for devices which support receiving reports through this method. This patch determines which method to use to send output reports based on the value of wMaxOutputLength in the device's HID descriptor. Signed-off-by: NAndrew Duggan <aduggan@synaptics.com> Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 NeilBrown 提交于
The recent comment: commit 7e83ccbe md/raid10: Allow skipping recovery when clean arrays are assembled Causes raid10 to skip a recovery in certain cases where it is safe to do so. Unfortunately it also causes a reshape to be skipped which is never safe. The result is that an attempt to reshape a RAID10 will appear to complete instantly, but no data will have been moves so the array will now contain garbage. (If nothing is written, you can recovery by simple performing the reverse reshape which will also complete instantly). Bug was introduced in 3.10, so this is suitable for 3.10-stable. Cc: stable@vger.kernel.org (3.10) Cc: Martin Wilck <mwilck@arcor.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
There is a bug in 'check_reshape' for raid5.c To checks that the new minimum number of devices is large enough (which is good), but it does so also after the reshape has started (bad). This is bad because - the calculation is now wrong as mddev->raid_disks has changed already, and - it is pointless because it is now too late to stop. So only perform that test when reshape has not been committed to. Signed-off-by: NNeilBrown <neilb@suse.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon updates from Guenter Roeck: - new driver to support GMT G762/G763 pwm fan controllers - add support for DS1631, DS1721, and DS1731 to ds1621 driver - remove detect function from ds1621 driver as unreliable - bug fixes in nct6775, iio_hwmon, and adm1021 drivers - remove redundant platform_set_drvdata in various drivers - add device tree support to ina2xx driver * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ds1621) Fix temperature rounding operations hwmon: (nct6775) Drop unsupported fan alarm attributes for NCT6775 hwmon: (nct6775) Fix temperature alarm attributes Add support for GMT G762/G763 PWM fan controllers hwmon: (ina2xx) Add device tree support to pass the shunt resistor hwmon: (ds1621) Update documentation hwmon: (ds1621) Add DS1731 chip support to ds1621 driver hwmon: (iio_hwmon) add alias table hwmon: (adm1021) Do not create min sysfs attributes for LM84 hwmon: (ds1621) Remove detect function hwmon: (ds1621) Add ds1631 chip support to ds1621 driver and documentation hwmon: (ds1621) Add ds1721 update interval sysfs attribute hwmon: (ds1621) Add ds1721 chip support hwmon: (w83627ehf) Remove redundant platform_set_drvdata() hwmon: (ntc_thermistor) Remove redundant platform_set_drvdata() hwmon: (i5k_amb) Remove redundant platform_set_drvdata() hwmon: (coretemp) Remove redundant platform_set_drvdata() hwmon: (abituguru3) Remove redundant platform_set_drvdata()
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds由 Linus Torvalds 提交于
Pull LED subsystem updates from Bryan Wu: - lp55xx device tree updates - mc13xxx driver updates - some clean up * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: leds: mc13783: Fix "uninitialized variable" warning leds: Convert led class driver from legacy pm ops to dev_pm_ops leds: leds-mc13783: Add MC13892 LED support leds: leds-mc13783: Prepare driver to support MC13892 LEDs leds: renesas-tpu: cleanup a small type issue leds: use platform_{get,set}_drvdata() leds: leds-gpio: Let device core handle pinctrl leds: lp5562: Properly setup of_device_id table leds: lp5523: Properly setup of_device_id table leds: lp5521: Properly setup of_device_id table leds: lp5562: support the device tree feature leds: lp55xx: support dynamic channel settings in the device tree structure leds: leds-ns2: remove unnecessary platform_set_drvdata() leds: leds-mc13783: remove unnecessary platform_set_drvdata() leds: leds-gpio: remove unnecessary platform_set_drvdata() leds: atmel-pwm: remove unnecessary platform_set_drvdata() leds: lp55xx: add support for Device Tree bindings
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound updates from Takashi Iwai: "A relative calm release at this time with a flat diffstat. The only significant change in the ALSA core side is the support for more than 32 card instances, configurable via kconfig. Other than that, in both ASoC and other parts, mostly some improvements and fixes on the driver side. - hda: More quirks for ALC269-variants on Dell & co, VIA codec fixes - hda: Haswell HDMI audio fixes, runtime PM improvements - hda: Intel BayTrail support, ALC5505 DSP support - es1968: MediaForte M56VAP support - usb-audio: Improved support for Yamaha/Roland devices - usb-audio: M2Tech hiFace, Audio Advantage Micro II support - hdspm: wordclock fixes - ASoC: Pending fixes for WM8962 - ASoC: Cleanups and fixes for Blackfin, SGTL5000 and UX500 - ASoC: Generalisation of the Bluetooth and HDMI stub drivers - ASoC: SSM2518 and RT5640 codec drivers. - ASoC: Tegra CPUs with RT5640 machine driver - ASoC: AC'97 refactoring bug fixes - ASoC: ADAU1701 driver fixes - Clean up of *_set_drvdata() in a wide range of drivers" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (284 commits) ALSA: vmaster: Fix the regression of missing vmaster hook call ALSA: hda - Add Dell SSID to support Headset Mic recording ASoC: adau1701: remove control_data assignment ASoC: adau1701: more direct regmap usage ASoC: ac97: fixup multi-platform AC'97 module build failure ASoC: pxa2xx: fixup multi-platform AC'97 build failures ASoC: tegra20-ac97: Remove unused variable ASoC: tegra20-ac97: Remove duplicate error message ALSA: usb-audio: Add Audio Advantage Micro II ASoC: tas5086: fix Mid-Z implementation ASoC: tas5086: fix TAS5086_CLOCK_CONTROL register size ALSA: Replace the magic number 44 with const ALSA: hda - Fix the max length of control name in generic parser ALSA: hda - Guess what, it's two more Dell headset mic quirks ALSA: hda - Yet another Dell headset mic quirk ALSA: hda - Add support for ALC5505 DSP power-save mode ASoC: mfld: Remove unused variable ALSA: usb-audio: add quirks for Roland QUAD/OCTO-CAPTURE ALSA: usb-audio: claim autodetected PCM interfaces all at once ALSA: usb-audio: remove superfluous Roland quirks ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: "Overview of changes: - The rest of maintainer email address updates. - Some core updates - more robust default behavior for port multipliers, better error reporting for SG_IO commands, and a way to better work around now ancient and probably pretty rare PATA -> SATA bridges with ATAPI devices. - sata_rcar stabilization. - Some hardware PCI ID additions and one-off low level driver updates." * 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (22 commits) AHCI: use ATA_BUSY libata-zpodd: must use ata_tf_init() ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs libata: cleanup SAT error translation ahci: sata: add support for exynos5440 sata libata: skip SRST for all SIMG [34]7x port-multipliers ahci: remove pmp link online check in FBS EH sata highbank: add bit-banged SGPIO driver support ahci: make ahci_transmit_led_message into a function pointer sata_rcar: fix compilation warning in sata_rcar_thaw() sata_highbank: increase retry count but shorten duration for Calxeda controller ata: use pci_get_drvdata() ipr: qc_fill_rtf() method should not store alternate status register sata_rcar: add 'base' local variable to some functions sata_rcar: correct 'sata_rcar_sht' sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg() libata: do not limit R-Car SATA driver to shmobile ata: use platform_{get,set}_drvdata() AHCI: Make distinct names for ports in /proc/interrupts ...
-
由 Linus Torvalds 提交于
Merge first patch-bomb from Andrew Morton: - various misc bits - I'm been patchmonkeying ocfs2 for a while, as Joel and Mark have been distracted. There has been quite a bit of activity. - About half the MM queue - Some backlight bits - Various lib/ updates - checkpatch updates - zillions more little rtc patches - ptrace - signals - exec - procfs - rapidio - nbd - aoe - pps - memstick - tools/testing/selftests updates * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (445 commits) tools/testing/selftests: don't assume the x bit is set on scripts selftests: add .gitignore for kcmp selftests: fix clean target in kcmp Makefile selftests: add .gitignore for vm selftests: add hugetlbfstest self-test: fix make clean selftests: exit 1 on failure kernel/resource.c: remove the unneeded assignment in function __find_resource aio: fix wrong comment in aio_complete() drivers/w1/slaves/w1_ds2408.c: add magic sequence to disable P0 test mode drivers/memstick/host/r592.c: convert to module_pci_driver drivers/memstick/host/jmb38x_ms: convert to module_pci_driver pps-gpio: add device-tree binding and support drivers/pps/clients/pps-gpio.c: convert to module_platform_driver drivers/pps/clients/pps-gpio.c: convert to devm_* helpers drivers/parport/share.c: use kzalloc Documentation/accounting/getdelays.c: avoid strncpy in accounting tool aoe: update internal version number to v83 aoe: update copyright date aoe: perform I/O completions in parallel ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
-
由 Andrew Morton 提交于
The x bit can easily get lost (patch(1) loses it, for example). Reported-by: NRamkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ramkumar Ramachandra 提交于
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ramkumar Ramachandra 提交于
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ramkumar Ramachandra 提交于
Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Cc: Dave Young <dyoung@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joern Engel 提交于
As the confusing naming indicates, this test has some overlap with pre-existing tests. Would be nice to merge them eventually. But since it is only test code, cleanliness is much less important than mere existence. Signed-off-by: NJoern Engel <joern@logfs.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joern Engel 提交于
thuge-gen was forgotten. Fix it by removing the duplication, so we don't get too many repeats. Signed-off-by: NJoern Engel <joern@logfs.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joern Engel 提交于
In case this ever gets scripted, it should return 0 on success and 1 on failure. Parsing the output should be left to meatbags. Signed-off-by: NJoern Engel <joern@logfs.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-