- 29 10月, 2009 2 次提交
-
-
由 Rusty Russell 提交于
Now that the return from alloc_percpu is compatible with the address of per-cpu vars, it makes sense to hand around the address of per-cpu variables. To make this sane, we remove the per_cpu__ prefix we used created to stop people accidentally using these vars directly. Now we have sparse, we can use that (next patch). tj: * Updated to convert stuff which were missed by or added after the original patch. * Kill per_cpu_var() macro. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
-
由 Tejun Heo 提交于
Make the following changes to remove some sparse warnings. * Make DEFINE_PER_CPU_SECTION() declare __pcpu_unique_* before defining it. * Annotate pcpu_extend_area_map() that it is entered with pcpu_lock held, releases it and then reacquires it. * Make percpu related macros use unique nested variable names. * While at it, add pcpu prefix to __size_call[_return]() macros as to-be-implemented sparse annotations will add percpu specific stuff to these macros. Signed-off-by: NTejun Heo <tj@kernel.org> Reviewed-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Rusty Russell <rusty@rustcorp.com.au>
-
- 03 10月, 2009 1 次提交
-
-
由 Christoph Lameter 提交于
Basically the existing percpu ops can be used for this_cpu variants that allow operations also on dynamically allocated percpu data. However, we do not pass a reference to a percpu variable in. Instead a dynamically or statically allocated percpu variable is provided. Preempt, the non preempt and the irqsafe operations generate the same code. It will always be possible to have the requires per cpu atomicness in a single RMW instruction with segment override on x86. 64 bit this_cpu operations are not supported on 32 bit. Signed-off-by: NChristoph Lameter <cl@linux-foundation.org> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 04 8月, 2009 1 次提交
-
-
由 Linus Torvalds 提交于
This is very useful for some common things like 'get_current()' and 'get_thread_info()', which can be used multiple times in a function, and where the result is cacheable. tj: Added the magical undocumented "P" modifier to UP __percpu_arg() to force gcc to dereference the pointer value passed in via the "p" input constraint. Without this, percpu_read_stable() returns the address of the percpu variable. Also added comment explaining the difference between percpu_read() and percpu_read_stable(). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 04 7月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
Generalize and move x86 setup_pcpu_lpage() into pcpu_lpage_first_chunk(). setup_pcpu_lpage() now is a simple wrapper around the generalized version. Other than taking size parameters and using arch supplied callbacks to allocate/free/map memory, pcpu_lpage_first_chunk() is identical to the original implementation. This simplifies arch code and will help converting more archs to dynamic percpu allocator. While at it, factor out pcpu_calc_fc_sizes() which is common to pcpu_embed_first_chunk() and pcpu_lpage_first_chunk(). [ Impact: code reorganization and generalization ] Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@elte.hu>
-
- 22 6月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
lpage allocator aliases a PMD page for each cpu and returns whatever is unused to the page allocator. When the pageattr of the recycled pages are changed, this makes the two aliases point to the overlapping regions with different attributes which isn't allowed and known to cause subtle data corruption in certain cases. This can be handled in simliar manner to the x86_64 highmap alias. pageattr code should detect if the target pages have PMD alias and split the PMD alias and synchronize the attributes. pcpur allocator is updated to keep the allocated PMD pages map sorted in ascending address order and provide pcpu_lpage_remapped() function which binary searches the array to determine whether the given address is aliased and if so to which address. pageattr is updated to use pcpu_lpage_remapped() to detect the PMD alias and split it up as necessary from cpa_process_alias(). Jan Beulich spotted the original problem and incorrect usage of vaddr instead of laddr for lookup. With this, lpage percpu allocator should work correctly. Re-enable it. [ Impact: fix subtle lpage pageattr bug and re-enable lpage ] Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NJan Beulich <JBeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu>
-
- 11 5月, 2009 1 次提交
-
-
由 Jan Beulich 提交于
- the byte operand constraints were wrong for 32-bit - the to-op's input operands weren't properly parenthesized [ Impact: fix possible miscompilation or build failure ] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 10 3月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
Impact: generic addr <-> pcpu ptr conversion macros There's nothing arch specific about x86 __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr(). With proper __per_cpu_load and __per_cpu_start defined, they'll do the right thing regardless of actual layout. Move these macros from arch/x86/include/asm/percpu.h to mm/percpu.c and allow archs to override it as necessary. Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 20 2月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
Impact: use new dynamic allocator, unified access to static/dynamic percpu memory Convert to the new dynamic percpu allocator. * implement populate_extra_pte() for both 32 and 64 * update setup_per_cpu_areas() to use pcpu_setup_static() * define __addr_to_pcpu_ptr() and __pcpu_ptr_to_addr() * define config HAVE_DYNAMIC_PER_CPU_AREA Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 09 2月, 2009 1 次提交
-
-
由 Brian Gerst 提交于
Impact: cleanup and bug fix Use the linker to create symbols for certain per-cpu variables that are offset by __per_cpu_load. This allows the removal of the runtime fixup of the GDT pointer, which fixes a bug with resume reported by Jiri Slaby. Reported-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NBrian Gerst <brgerst@gmail.com> Acked-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 21 1月, 2009 1 次提交
-
-
由 Brian Gerst 提交于
Impact: slightly better code generation for percpu_to_op() The processor will sign-extend 32-bit immediate values in 64-bit operations. Use the 'e' constraint ("32-bit signed integer constant, or a symbolic reference known to fit that range") for 64-bit constants. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 20 1月, 2009 1 次提交
-
-
由 Brian Gerst 提交于
Impact: x86_64 percpu area layout change, irq_stack now at the beginning Now that the PDA is empty except for the stack canary, it can be removed. The irqstack is moved to the start of the per-cpu section. If the stack protector is enabled, the canary overlaps the bottom 48 bytes of the irqstack. tj: * updated subject * dropped asm relocation of irq_stack_ptr * updated comments a bit * rebased on top of stack canary changes Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 18 1月, 2009 1 次提交
-
-
由 Brian Gerst 提交于
Accessing memory through %gs should not use rip-relative addressing. Adding a P prefix for the argument tells gcc to not add (%rip) to the memory references. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 16 1月, 2009 5 次提交
-
-
由 Ingo Molnar 提交于
It is an optimization and a cleanup, and adds the following new generic percpu methods: percpu_read() percpu_write() percpu_add() percpu_sub() percpu_and() percpu_or() percpu_xor() and implements support for them on x86. (other architectures will fall back to a default implementation) The advantage is that for example to read a local percpu variable, instead of this sequence: return __get_cpu_var(var); ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx ffffffff8102ca32: 81 ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax We can get a single instruction by using the optimized variants: return percpu_read(var); ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax I also cleaned up the x86-specific APIs and made the x86 code use these new generic percpu primitives. tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out * added percpu_and() for completeness's sake * made generic percpu ops atomic against preemption Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
pda is now a percpu variable and there's no reason it can't use plain x86 percpu accessors. Add x86_test_and_clear_bit_percpu() and replace pda op implementations with wrappers around x86 percpu accessors. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Now that pda is allocated as part of percpu, percpu doesn't need to be accessed through pda. Unify x86_64 SMP percpu access with x86_32 SMP one. Other than the segment register, operand size and the base of percpu symbols, they behave identical now. This patch replaces now unnecessary pda->data_offset with a dummy field which is necessary to keep stack_canary at its place. This patch also moves per_cpu_offset initialization out of init_gdt() into setup_per_cpu_areas(). Note that this change also necessitates explicit per_cpu_offset initializations in voyager_smp.c. With this change, x86_OP_percpu()'s are as efficient on x86_64 as on x86_32 and also x86_64 can use assembly PER_CPU macros. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Tejun Heo 提交于
Make early_per_cpu() a lvalue as per_cpu() is and use it where applicable. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 10月, 2008 2 次提交
-
-
由 H. Peter Anvin 提交于
Change header guards named "ASM_X86__*" to "_ASM_X86_*" since: a. the double underscore is ugly and pointless. b. no leading underscore violates namespace constraints. Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
-
- 18 8月, 2008 1 次提交
-
-
由 Marcin Slusarz 提交于
Quoting Mike Travis in "x86: cleanup early per cpu variables/accesses v4" (23ca4bba): The DEFINE macro defines the per_cpu variable as well as the early map and pointer. It also initializes the per_cpu variable and map elements to "_initvalue". The early_* macros provide access to the initial map (usually setup during system init) and the early pointer. This pointer is initialized to point to the early map but is then NULL'ed when the actual per_cpu areas are setup. After that the per_cpu variable is the correct access to the variable. As these variables are NULL'ed before __init sections are dropped (in setup_per_cpu_maps), they can be safely annotated as __ref. This change silences following section mismatch warnings: WARNING: vmlinux.o(.data+0x46c0): Section mismatch in reference from the variable x86_cpu_to_apicid_early_ptr to the variable .init.data:x86_cpu_to_apicid_early_map The variable x86_cpu_to_apicid_early_ptr references the variable __initdata x86_cpu_to_apicid_early_map If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x46c8): Section mismatch in reference from the variable x86_bios_cpu_apicid_early_ptr to the variable .init.data:x86_bios_cpu_apicid_early_map The variable x86_bios_cpu_apicid_early_ptr references the variable __initdata x86_bios_cpu_apicid_early_map If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, WARNING: vmlinux.o(.data+0x46d0): Section mismatch in reference from the variable x86_cpu_to_node_map_early_ptr to the variable .init.data:x86_cpu_to_node_map_early_map The variable x86_cpu_to_node_map_early_ptr references the variable __initdata x86_cpu_to_node_map_early_map If the reference is valid then annotate the variable with __init* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Mike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 23 7月, 2008 1 次提交
-
-
由 Vegard Nossum 提交于
This patch is the result of an automatic script that consolidates the format of all the headers in include/asm-x86/. The format: 1. No leading underscore. Names with leading underscores are reserved. 2. Pathname components are separated by two underscores. So we can distinguish between mm_types.h and mm/types.h. 3. Everything except letters and numbers are turned into single underscores. Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
-
- 16 7月, 2008 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
As a stopgap until Mike Travis's x86-64 gs-based percpu patches are ready, provide workaround functions for x86_read/write_percpu for Xen's use. Specifically, this means that we can't really make use of vcpu placement, because we can't use a single gs-based memory access to get to vcpu fields. So disable all that for now. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stephen Tweedie <sct@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Mark McLoughlin <markmc@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 08 7月, 2008 1 次提交
-
-
由 Mike Travis 提交于
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is used by some per_cpu variables that are initialized and accessed before there are per_cpu areas allocated. ["Early" in respect to per_cpu variables is "earlier than the per_cpu areas have been setup".] This patchset adds these new macros: DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) EXPORT_EARLY_PER_CPU_SYMBOL(_name) DECLARE_EARLY_PER_CPU(_type, _name) early_per_cpu_ptr(_name) early_per_cpu_map(_name, _idx) early_per_cpu(_name, _cpu) The DEFINE macro defines the per_cpu variable as well as the early map and pointer. It also initializes the per_cpu variable and map elements to "_initvalue". The early_* macros provide access to the initial map (usually setup during system init) and the early pointer. This pointer is initialized to point to the early map but is then NULL'ed when the actual per_cpu areas are setup. After that the per_cpu variable is the correct access to the variable. The early_per_cpu() macro is not very efficient but does show how to access the variable if you have a function that can be called both "early" and "late". It tests the early ptr to be NULL, and if not then it's still valid. Otherwise, the per_cpu variable is used instead: #define early_per_cpu(_name, _cpu) \ (early_per_cpu_ptr(_name) ? \ early_per_cpu_ptr(_name)[_cpu] : \ per_cpu(_name, _cpu)) A better method is to actually check the pointer manually. In the case below, numa_set_node can be called both "early" and "late": void __cpuinit numa_set_node(int cpu, int node) { int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); if (cpu_to_node_map) cpu_to_node_map[cpu] = node; else per_cpu(x86_cpu_to_node_map, cpu) = node; } * Add a flag "arch_provides_topology_pointers" that indicates pointers to topology cpumask_t maps are available. Otherwise, use the function returning the cpumask_t value. This is useful if cpumask_t set size is very large to avoid copying data on to/off of the stack. * The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while the non-debug case has been optimized a bit. * Remove an unreferenced compiler warning in drivers/base/topology.c * Clean up #ifdef in setup.c For inclusion into sched-devel/latest tree. Based on: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + sched-devel/latest .../mingo/linux-2.6-sched-devel.git Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 17 4月, 2008 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 30 1月, 2008 1 次提交
-
-
由 travis@sgi.com 提交于
Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty small so this is simply adding them together. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 11 10月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
Move the headers to include/asm-x86 and fixup the header install make rules Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-