- 31 1月, 2017 4 次提交
-
-
由 Jack Morgenstein 提交于
Some Hypervisors detach VFs from VMs by instantly causing an FLR event to be generated for a VF. In the mlx4 case, this will cause that VF's comm channel to be disabled before the VM has an opportunity to invoke the VF device's "shutdown" method. The result is that the VF driver on the VM will experience a command timeout during the shutdown process when the Hypervisor does not deliver a command-completion event to the VM. To avoid FW command timeouts on the VM when the driver's shutdown method is invoked, we detect the absence of the VF's comm channel at the very start of the shutdown process. If the comm-channel has already been disabled, we cause all FW commands during the device shutdown process to immediately return success (and thus avoid all command timeouts). Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux由 David S. Miller 提交于
Saeed Mahameed says: ==================== mlx5-fixes-2017-01-27 A couple of mlx5 core and ethernet driver fixes. From Or, A couple of error return values and error handling fixes. From Hadar, Support TC encapsulation offloads even when the mlx5e uplink device is stacked under an upper device. From Gal, Two patches to fix RSS hash modifications via ethtool. From Moshe, Added a needed ets capability check. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2017-01-29' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.10 Most important here are fixes to two iwlwifi crashes, but there's also a firmware naming fix for iwlwifi and a revert of an older bcma patch. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arseny Solokha 提交于
In spite of switching to paged allocation of Rx buffers, the driver still called dma_unmap_single() in the Rx queues tear-down path. The DMA region unmapping code in free_skb_rx_queue() basically predates the introduction of paged allocation to the driver. While being refactored, it apparently hasn't reflected the change in the DMA API usage by its counterpart gfar_new_page(). As a result, setting an interface to the DOWN state now yields the following: # ip link set eth2 down fsl-gianfar ffe24000.ethernet: DMA-API: device driver frees DMA memory with wrong function [device address=0x000000001ecd0000] [size=40] ------------[ cut here ]------------ WARNING: CPU: 1 PID: 189 at lib/dma-debug.c:1123 check_unmap+0x8e0/0xa28 CPU: 1 PID: 189 Comm: ip Tainted: G O 4.9.5 #1 task: dee73400 task.stack: dede2000 NIP: c02101e8 LR: c02101e8 CTR: c0260d74 REGS: dede3bb0 TRAP: 0700 Tainted: G O (4.9.5) MSR: 00021000 <CE,ME> CR: 28002222 XER: 00000000 GPR00: c02101e8 dede3c60 dee73400 000000b6 dfbd033c dfbd36c4 1f622000 dede2000 GPR08: 00000007 c05b1634 1f622000 00000000 22002484 100a9904 00000000 00000000 GPR16: 00000000 db4c849c 00000002 db4c8480 00000001 df142240 db4c84bc 00000000 GPR24: c0706148 c0700000 00029000 c07552e8 c07323b4 dede3cb8 c07605e0 db535540 NIP [c02101e8] check_unmap+0x8e0/0xa28 LR [c02101e8] check_unmap+0x8e0/0xa28 Call Trace: [dede3c60] [c02101e8] check_unmap+0x8e0/0xa28 (unreliable) [dede3cb0] [c02103b8] debug_dma_unmap_page+0x88/0x9c [dede3d30] [c02dffbc] free_skb_resources+0x2c4/0x404 [dede3d80] [c02e39b4] gfar_close+0x24/0xc8 [dede3da0] [c0361550] __dev_close_many+0xa0/0xf8 [dede3dd0] [c03616f0] __dev_close+0x2c/0x4c [dede3df0] [c036b1b8] __dev_change_flags+0xa0/0x174 [dede3e10] [c036b2ac] dev_change_flags+0x20/0x60 [dede3e30] [c03e130c] devinet_ioctl+0x540/0x824 [dede3e90] [c0347dcc] sock_ioctl+0x134/0x298 [dede3eb0] [c0111814] do_vfs_ioctl+0xac/0x854 [dede3f20] [c0111ffc] SyS_ioctl+0x40/0x74 [dede3f40] [c000f290] ret_from_syscall+0x0/0x3c --- interrupt: c01 at 0xff45da0 LR = 0xff45cd0 Instruction dump: 811d001c 7c66482e 813d0020 9061000c 807f000c 5463103a 7cc6182e 3c60c052 386309ac 90c10008 4cc63182 4826b845 <0fe00000> 4bfffa60 3c80c052 388402c4 ---[ end trace 695ae6d7ac1d0c47 ]--- Mapped at: [<c02e22a8>] gfar_alloc_rx_buffs+0x178/0x248 [<c02e3ef0>] startup_gfar+0x368/0x570 [<c036aeb4>] __dev_open+0xdc/0x150 [<c036b1b8>] __dev_change_flags+0xa0/0x174 [<c036b2ac>] dev_change_flags+0x20/0x60 Even though the issue was discovered in 4.9 kernel, the code in question is identical in the current net and net-next trees. Fixes: 75354148 ("gianfar: Add paged allocation and Rx S/G") Signed-off-by: NArseny Solokha <asolokha@kb.kras.ru> Acked-by: NClaudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 1月, 2017 14 次提交
-
-
由 Pavel Belous 提交于
This patch introduce support for 2500BaseT and 5000BaseT link modes. These modes are included in the new IEEE 802.3bz standard. Signed-off-by: NPavel Belous <pavel.s.belous@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Khoroshilov 提交于
init_ring(), refill_rx_ring() and start_tx() don't check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Nyekjaer 提交于
As pr commit "net: phy: phy drivers should not set SUPPORTED_[Asym_]Pause" this phy driver should not set these feature bits. Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Fixes: 9d162ed6 ("net: phy: micrel: add support for KSZ8795") Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by: NZhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NOliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rafal Ozieblo 提交于
This patch adds support for 32 bit GEM in 64 bit system. It checks capability at runtime and uses appropriate buffer descriptor. Signed-off-by: NRafal Ozieblo <rafalo@cadence.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Brodkin 提交于
DW GMAC databook says the following about bits in "Register 15 (Interrupt Mask Register)": --------------------------->8------------------------- When set, this bit __disables_the_assertion_of_the_interrupt_signal__ because of the setting of XXX bit in Register 14 (Interrupt Status Register). --------------------------->8------------------------- In fact even if we mask one bit in the mask register it doesn't prevent corresponding bit to appear in the status register, it only disables interrupt generation for corresponding event. But currently we expect a bit different behavior: status bits to be in sync with their masks, i.e. if mask for bit A is set in the mask register then bit A won't appear in the interrupt status register. This was proven to be incorrect assumption, see discussion here [1]. That misunderstanding causes unexpected behaviour of the GMAC, for example we were happy enough to just see bogus messages about link state changes. So from now on we'll be only checking bits that really may trigger an interrupt. [1] https://lkml.org/lkml/2016/11/3/413Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: Joachim Eastwood <manabian@gmail.com> Cc: Phil Reid <preid@electromag.com.au> Cc: David Miller <davem@davemloft.net> Cc: Alexandre Torgue <alexandre.torgue@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Moshe Shemesh 提交于
On dcbnl callback getpgtccfgtx, the driver should check the ets capability before ets query command is sent to firmware. It is valid to return from this void function without changing in/out parameters, as these parameters are initialized to DCB_ATTR_VALUE_UNDEFINED. Fixes: 3a6a931d ("net/mlx5e: Support DCBX CEE API") Signed-off-by: NMoshe Shemesh <moshe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Gal Pressman 提交于
Modifying TIR hash should change selected fields bitmask in addition to the function and key. Formerly, Only on ethool mlx5e_set_rxfh "ethtoo -X" we would not set this field resulting in zeroing of its value, which means no packet fields are used for RX RSS hash calculation thus causing all traffic to arrive in RQ[0]. On driver load out of the box we don't have this issue, since the TIR hash is fully created from scratch. Tested: ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028d ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Gal Pressman 提交于
We don't need to modify our TIRs unless the user requested a change in the hash function/key, for example when changing indirection only. Tested: # Modify TIRs hash is needed ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> # Modify TIRs hash is not needed ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028d ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by: NGal Pressman <galp@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Hadar Hen Zion 提交于
When tunneling is used, some virtualizations systems set the (mlx5e) uplink device to be stacked under upper devices such as bridge or ovs internal port, where the VTEP IP address used for the encapsulation is set on that upper device. In order to support such use-cases, we also deal with a setup where the egress mirred device isn't representing a port on the HW e-switch to where the ingress device belongs. We use eswitch service function which returns the uplink and set it as the egress device of the tc encap rule. Fixes: a54e20b4 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: NHadar Hen Zion <hadarh@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
We must re-enable RoCE on the e-switch management port (PF) only after destroying the FDB in its switchdev/offloaded mode. Otherwise, when encapsulation is supported, this re-enablement will fail. Also, it's more natural and symmetric to disable RoCE on the PF before we create the FDB under switchdev mode, so do that as well and revert if getting into error during the mode change later. Fixes: 9da34cd3 ('net/mlx5: Disable RoCE on the e-switch management [..]') Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
Make sure to return error when we failed retrieving the FDB steering name space. Also, while around, correctly print the error when mode change revert fails in the warning message. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NRoi Dayan <roid@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
When we fail to retrieve a hardware steering name-space, the returned error code should say that this operation is not supported. Align the various places in the driver where this call is made to this convention. Also, make sure to warn when we fail to retrieve a SW (ANCHOR) name-space. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
由 Or Gerlitz 提交于
As ENOTSUPP is specific to NFS, change the return error value to EOPNOTSUPP in various places in the mlx5 driver. Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Suggested-by: NYotam Gigi <yotamg@mellanox.com> Reviewed-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
-
- 28 1月, 2017 17 次提交
-
-
由 Kalle Valo 提交于
ath9k-devel list is now closed, only linux-wireless should be used. Reported-by: NMichael Renzmann <mrenzmann@madwifi-project.org> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP DF on transmit). 2) Netfilter needs to reflect the fwmark when sending resets, from Pau Espin Pedrol. 3) nftable dump OOPS fix from Liping Zhang. 4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit, from Rolf Neugebauer. 5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd Bergmann. 6) Fix regression in handling of NETIF_F_SG in harmonize_features(), from Eric Dumazet. 7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern. 8) tcp_fastopen_create_child() needs to setup tp->max_window, from Alexey Kodanev. 9) Missing kmemdup() failure check in ipv6 segment routing code, from Eric Dumazet. 10) Don't execute unix_bind() under the bindlock, otherwise we deadlock with splice. From WANG Cong. 11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer, therefore callers must reload cached header pointers into that skb. Fix from Eric Dumazet. 12) Fix various bugs in legacy IRQ fallback handling in alx driver, from Tobias Regnery. 13) Do not allow lwtunnel drivers to be unloaded while they are referenced by active instances, from Robert Shearman. 14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven. 15) Fix a few regressions from virtio_net XDP support, from John Fastabend and Jakub Kicinski. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits) ISDN: eicon: silence misleading array-bounds warning net: phy: micrel: add support for KSZ8795 gtp: fix cross netns recv on gtp socket gtp: clear DF bit on GTP packet tx gtp: add genl family modules alias tcp: don't annotate mark on control socket from tcp_v6_send_response() ravb: unmap descriptors when freeing rings virtio_net: reject XDP programs using header adjustment virtio_net: use dev_kfree_skb for small buffer XDP receive r8152: check rx after napi is enabled r8152: re-schedule napi for tx r8152: avoid start_xmit to schedule napi when napi is disabled r8152: avoid start_xmit to call napi_schedule during autosuspend net: dsa: Bring back device detaching in dsa_slave_suspend() net: phy: leds: Fix truncated LED trigger names net: phy: leds: Break dependency of phy.h on phy_led_triggers.h net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash net-next: ethernet: mediatek: change the compatible string Documentation: devicetree: change the mediatek ethernet compatible string bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status(). ...
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linux由 Linus Torvalds 提交于
Pull xfs uodates from Darrick Wong: "I have some more fixes this week: better input validation, corruption avoidance, build fixes, memory leak fixes, and a couple from Christoph to avoid an ENOSPC failure. Summary: - Fix race conditions in the CoW code - Fix some incorrect input validation checks - Avoid crashing fs by running out of space when freeing inodes - Fix toctou race wrt whether or not an inode has an attr - Fix build error on arm - Fix page refcount corruption when readahead fails - Don't corrupt userspace in the bmap ioctl" * tag 'xfs-for-linus-4.10-rc6-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent quotacheck from overloading inode lru xfs: fix bmv_count confusion w/ shared extents xfs: clear _XBF_PAGES from buffers when readahead page xfs: extsize hints are not unlikely in xfs_bmap_btalloc xfs: remove racy hasattr check from attr ops xfs: use per-AG reservations for the finobt xfs: only update mount/resv fields on success in __xfs_ag_resv_init xfs: verify dirblocklog correctly xfs: fix COW writeback race
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs updates from Chris Mason: "Some fixes that we've collected from the list. We still have one more pending to nail down a regression in lzo compression, but I wanted to get this batch out the door" * 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: remove ->{get, set}_acl() from btrfs_dir_ro_inode_operations Btrfs: disable xattr operations on subvolume directories Btrfs: remove old tree_root case in btrfs_read_locked_inode() Btrfs: fix truncate down when no_holes feature is enabled Btrfs: Fix deadlock between direct IO and fast fsync btrfs: fix false enospc error when truncating heavily reflinked file
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull block fixes from Jens Axboe: "A set of fixes for this series. This contains: - Set of fixes for the nvme target code - A revert of patch from this merge window, causing a regression with WRITE_SAME on iSCSI targets at least. - A fix for a use-after-free in the new O_DIRECT bdev code. - Two fixes for the xen-blkfront driver" * 'for-linus' of git://git.kernel.dk/linux-block: Revert "sd: remove __data_len hack for WRITE SAME" nvme-fc: use blk_rq_nr_phys_segments nvmet-rdma: Fix missing dma sync to nvme data structures nvmet: Call fatal_error from keep-alive timout expiration nvmet: cancel fatal error and flush async work before free controller nvmet: delete controllers deletion upon subsystem release nvmet_fc: correct logic in disconnect queue LS handling block: fix use after free in __blkdev_direct_IO xen-blkfront: correct maximum segment accounting xen-blkfront: feature flags handling adjustments
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "Second round of -rc fixes for 4.10. This -rc cycle has been slow for the rdma subsystem. I had already sent you the first batch before the Holiday break. After that, we kept only getting a few here or there. Up until this week, when I got a drop of 13 to one driver (qedr). So, here's the -rc patches I have. I currently have none held in reserve, so unless something new comes in, this is it until the next merge window opens. Summary: - series of iw_cxgb4 fixes to make it work with the drain cq API - one or two patches each to: srp, iser, cxgb3, vmw_pvrdma, umem, rxe, and ipoib - one big series (13 patches) for the new qedr driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (27 commits) RDMA/cma: Fix unknown symbol when CONFIG_IPV6 is not enabled IB/rxe: Prevent from completer to operate on non valid QP IB/rxe: Fix rxe dev insertion to rxe_dev_list IB/umem: Release pid in error and ODP flow RDMA/qedr: Dispatch port active event from qedr_add RDMA/qedr: Fix and simplify memory leak in PD alloc RDMA/qedr: Fix RDMA CM loopback RDMA/qedr: Fix formatting RDMA/qedr: Mark three functions as static RDMA/qedr: Don't reset QP when queues aren't flushed RDMA/qedr: Don't spam dmesg if QP is in error state RDMA/qedr: Remove CQ spinlock from CM completion handlers RDMA/qedr: Return max inline data in QP query result RDMA/qedr: Return success when not changing QP state RDMA/qedr: Add uapi header qedr-abi.h RDMA/qedr: Fix MTU returned from QP query RDMA/core: Add the function ib_mtu_int_to_enum IB/vmw_pvrdma: Fix incorrect cleanup on pvrdma_pci_probe error path IB/vmw_pvrdma: Don't leak info from alloc_ucontext IB/cxgb3: fix misspelling in header guard ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Another two bug fixes: - ptrace partial write information leak - a guest page hinting regression introduced with v4.6" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: Fix cmma unused transfer from pgste into pte s390/ptrace: Preserve previous registers for short regset write
-
由 Linus Torvalds 提交于
Merge branch 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "An ARM fix in the Xen SWIOTLB - mainly the translation of physical to bus addresses was done just a tad too late" * 'stable/for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb-xen: update dev_addr after swapping pages
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO fix from Alex Williamson: "mdev IOMMU groups are not yet compatible with the powerpc SPAPR IOMMU backend, detect and fail group attach (Greg Kurz)" * tag 'vfio-v4.10-rc6' of git://github.com/awilliam/linux-vfio: vfio/spapr: fail tce_iommu_attach_group() when iommu_data is null
-
由 Jack Morgenstein 提交于
If IPV6 has not been enabled in the underlying kernel, we must avoid calling IPV6 procedures in rdma_cm.ko. This requires using "IS_ENABLED(CONFIG_IPV6)" in "if" statements surrounding any code which calls external IPV6 procedures. In the instance fixed here, procedure cma_bind_addr() called ipv6_addr_type() -- which resulted in calling external procedure __ipv6_addr_type(). Fixes: 6c26a771 ("RDMA/cma: fix IPv6 address resolution") Cc: <stable@vger.kernel.org> # v4.2+ Cc: Spencer Baugh <sbaugh@catern.com> Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il> Reviewed-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Jens Axboe 提交于
Merge branch 'stable/for-jens-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus Konrad writes: Please pull in your 'for-linus' branch two little fixes for Xen block front: One fix is for handling the XEN_PAGE_SIZE != PAGE_SIZE (4KB vs 64KB on ARM for example) mishandling while the other is fixing the accounting for the configuration changes.
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
Pull media fixes from Mauro Carvalho Chehab: - fix a regression on tvp5150 causing failures at input selection and image glitches - CEC was moved out of staging for v4.10. Fix some bugs on it while not too late - fix a regression on pctv452e caused by VM stack changes - fix suspend issued with smiapp - fix a regression on cobalt driver - fix some warnings and Kconfig issues with some random configs. * tag 'media/v4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5k4ecgx: select CRC32 helper [media] dvb: avoid warning in dvb_net [media] v4l: tvp5150: Don't override output pinmuxing at stream on/off time [media] v4l: tvp5150: Fix comment regarding output pin muxing [media] v4l: tvp5150: Reset device at probe time, not in get/set format handlers [media] pctv452e: move buffer to heap, no mutex [media] media/cobalt: use pci_irq_allocate_vectors [media] cec: fix race between configuring and unconfiguring [media] cec: move cec_report_phys_addr into cec_config_thread_func [media] cec: replace cec_report_features by cec_fill_msg_report_features [media] cec: update log_addr[] before finishing configuration [media] cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2 [media] cec: when canceling a message, don't overwrite old status info [media] cec: fix report_current_latency [media] smiapp: Make suspend and resume functions __maybe_unused [media] smiapp: Implement power-on and power-off sequences without runtime PM
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc由 Linus Torvalds 提交于
Pull MMC fix from Ulf Hansson: "MMC host: fix runtime PM resume path in dw_mmc" * tag 'mmc-v4.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: dw_mmc: force setup bus if active slots exist
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux由 Linus Torvalds 提交于
Pull thermal management fix from Zhang Rui: "A single revert from a recently introduced problem. Specifics: Commit 7611fb68 ("thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"), which was introduced in 4.10-rc5, uses new hwmon API. But this breaks some soc thermal driver because the new hwmon API has a strict rule for the hwmon device name. Revert the offending commit as a quick solution for 4.10" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Revert "thermal: thermal_hwmon: Convert to hwmon_device_register_with_info()"
-
由 Brian Foster 提交于
Quotacheck runs at mount time in situations where quota accounting must be recalculated. In doing so, it uses bulkstat to visit every inode in the filesystem. Historically, every inode processed during quotacheck was released and immediately tagged for reclaim because quotacheck runs before the superblock is marked active by the VFS. In other words, the final iput() lead to an immediate ->destroy_inode() call, which allowed the XFS background reclaim worker to start reclaiming inodes. Commit 17c12bcd ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped") marks the XFS superblock active sooner as part of the mount process to support caching inodes processed during log recovery. This occurs before quotacheck and thus means all inodes processed by quotacheck are inserted to the LRU on release. The s_umount lock is held until the mount has completed and thus prevents the shrinkers from operating on the sb. This means that quotacheck can excessively populate the inode LRU and lead to OOM conditions on systems without sufficient RAM. Update the quotacheck bulkstat handler to set XFS_IGET_DONTCACHE on inodes processed by quotacheck. This causes ->drop_inode() to return 1 and in turn causes iput_final() to evict the inode. This preserves the original quotacheck behavior and prevents it from overloading the LRU and running out of memory. CC: stable@vger.kernel.org # v4.9 Reported-by: NMartin Svec <martin.svec@zoner.cz> Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Arnd Bergmann 提交于
With some gcc versions, we get a warning about the eicon driver, and that currently shows up as the only remaining warning in one of the build bots: In file included from ../drivers/isdn/hardware/eicon/message.c:30:0: eicon/message.c: In function 'mixer_notify_update': eicon/platform.h:333:18: warning: array subscript is above array bounds [-Warray-bounds] The code is easily changed to open-code the unusual PUT_WORD() line causing this to avoid the warning. Cc: stable@vger.kernel.org Link: http://arm-soc.lixom.net/buildlogs/stable-rc/v4.4.45/Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Nyekjaer 提交于
This is adds support for the PHYs in the KSZ8795 5port managed switch. It will allow to detect the link between the switch and the soc and uses the same read_status functions as the KSZ8873MLL switch. Signed-off-by: NSean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 1月, 2017 5 次提交
-
-
由 David S. Miller 提交于
Andreas Schultz says: ==================== various gtp fixes I'm sorry for the compile error mess up in the last version. It's no excuse for not test compiling, but the hunks got lost in a rebase. This is the part of the previous "simple gtp improvements" series that Pablo indicated should go into net. The addition of the module alias fixes genl family autoloading, clearing the DF bit fixes a protocol violation in regard to the specification and the netns comparison fixes a corner case of cross netns recv. v2->v3: fix compiler error introduced in rebase ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Schultz 提交于
The use of the passed through netlink src_net to check for a cross netns operation was wrong. Using the GTP socket and the GTP netdevice is always correct (even if the netdev has been moved to new netns after link creation). Remove the now obsolete net field from gtp_dev. Signed-off-by: NAndreas Schultz <aschultz@tpip.net> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Schultz 提交于
3GPP TS 29.281 and 3GPP TS 29.060 imply that GTP-U packets should be sent with the DF bit cleared. For example 3GPP TS 29.060, Release 8, Section 13.2.2: > Backbone router: Any router in the backbone may fragment the GTP > packet if needed, according to IPv4. Signed-off-by: NAndreas Schultz <aschultz@tpip.net> Acked-by: NHarald Welte <laforge@netfilter.org> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Schultz 提交于
Auto-load the module when userspace asks for the gtp netlink family. Signed-off-by: NAndreas Schultz <aschultz@tpip.net> Acked-by: NHarald Welte <laforge@netfilter.org> Acked-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira 提交于
Unlike ipv4, this control socket is shared by all cpus so we cannot use it as scratchpad area to annotate the mark that we pass to ip6_xmit(). Add a new parameter to ip6_xmit() to indicate the mark. The SCTP socket family caches the flowi6 structure in the sctp_transport structure, so we cannot use to carry the mark unless we later on reset it back, which I discarded since it looks ugly to me. Fixes: bf99b4de ("tcp: fix mark propagation with fwmark_reflect enabled") Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-