Honor error code from stmmac_dt_phy() instead of always
returning -ENODEV.

No functional change intended.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The device tree binding for stmmac says:

- Multiple TX Queues parameters: below the list of all the parameters to
                                 configure the multiple TX queues:
        - snps,tx-queues-to-use: number of TX queues to be used in the driver
	[...]
        - For each TX queue
		[...]

However, if one specifies snps,tx-queues-to-use = 2,
but omits the queue subnodes, or defines just one queue subnode,
since the driver appears to initialize queues with sane default
values, we will get tx queue timeouts.

This is because the initialization code only initializes
as many queues as it finds subnodes. Potentially leaving
some queues uninitialized.

To avoid hard to debug issues, return an error if the number
of subnodes differ from snps,tx-queues-to-use/snps,rx-queues-to-use.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio()
instead of rx_queue_routing().

This looks like a copy paste issue, since
stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(),
and both stmmac_mac_config_rx_queues_routing() and
stmmac_mac_config_rx_queues_prio() are very similar in structure.

Fixes: abe80fdc ("net: stmmac: RX queue routing configuration")
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Looking at dwmac4_tx_queue_routing(), it is obvious that it
sets up rx queue routing.

Rename dwmac4_tx_queue_routing() to dwmac4_rx_queue_routing()
to better match reality.

Fixes: abe80fdc ("net: stmmac: RX queue routing configuration")
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current code assumes that a tx_skbuff entry has been cleared
by stmmac_tx_clean() before stmmac_xmit()/stmmac_tso_xmit()
assigns a new skb to that entry. However, since we never check
the current value before overwriting it, it is theoretically
possible that a non-NULL value is overwritten.

Add WARN_ONs to verify that each entry in tx_skbuff is NULL
before it is assigned a new value.
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tx_skbuff is initialized to NULL in init_dma_tx_desc_rings(), which is
called from ndo_open().

stmmac_tx_clean() frees any non-NULL skb, and sets the tx_skbuff
entry to NULL. Hence, there is no need to set skbuff entries to NULL
in stmmac_xmit()/stmmac_tso_xmit(), and doing so falsely gives the
reader the impression that it is needed.
Do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit().
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DMA engine in dwmac4 can segment a large TSO packet to several
smaller packets of (max) size Maximum Segment Size (MSS).

The DMA engine fetches and saves the MSS via a context descriptor.

This context decriptor has to be provided to each tx DMA channel.
To ensure that this is done, move struct member mss from stmmac_priv
to stmmac_tx_queue.

stmmac_reset_queues_param() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_resume().

init_dma_tx_desc_rings() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_open().

This fixes tx queue timeouts for dwmac4, with DT property
snps,tx-queues-to-use > 1, when running iperf3 with multiple threads.

Fixes: ce736788 ("net: stmmac: adding multiple buffers for TX")
Signed-off-by: NNiklas Cassel <niklas.cassel@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use %*ph format to print small buffer as hex string.
Suggested-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NAntonio Cardace <anto.cardace@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: Expose KVD linear parts as resources

Arkadi says:

Expose the KVD linear partitions via the devlink resource interface. This
will give the user the ability to control the linear memory division.

---
v1->v2:
- patch1:
 - fixed u64 division error reported by kbuildbot
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for calculating occupancy for separate kvdl parts.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for dynamic partition set via the resource interface.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The linear part of the KVD memory is sub-divided into multiple parts. This
patch exposes this internal partitions via the resource interface.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After adding size validation logic into core cleanup is required.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the size validation is done via a cb, which is unneeded. The
size validation can be moved to core. The next patch will perform cleanup.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
net: Get rid of net_mutex and simplify cleanup_list queueing

[1/3] kills net_mutex and makes net_sem be taken for write instead.
      This is made to take less locks (1 instead of 2) for the time
      before all pernet_operations are converted.

[2-3/3] simplifies dead net cleanup queueing, and makes llist api
        be used for that.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When llist_add() returns false, cleanup_net() hasn't made its
llist_del_all(), while the work has already been scheduled
by the first queuer. So, we may skip queue_work() in this case.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This simplifies cleanup queueing and makes cleanup lists
to use llist primitives. Since llist has its own cmpxchg()
ordering, cleanup_list_lock is not more need.

Also, struct llist_node is smaller, than struct list_head,
so we save some bytes in struct net with this patch.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We take net_mutex, when there are !async pernet_operations
registered, and read locking of net_sem is not enough. But
we may get rid of taking the mutex, and just change the logic
to write lock net_sem in such cases. This obviously reduces
the number of lock operations, we do.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Supplementary TX descriptors were not being accounted for, which
was resulting in an overflow of the hardware device's transmit
queue. Keep track of those descriptors now when determining
how many entries remain on the TX queue.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Prevent index integer overflow in ptr_ring, from Jason Wang.

 2) Program mvpp2 multicast filter properly, from Mikulas Patocka.

 3) The bridge brport attribute file is write only and doesn't have a
    ->show() method, don't blindly invoke it. From Xin Long.

 4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil.

 5) Fix multiple definition issue with if_ether.h UAPI header, from
    Hauke Mehrtens.

 6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini
    Varadhan.

 7) Revert XDP redirect support from thunderx driver, it is not
    implemented properly. From Jesper Dangaard Brouer.

 8) Fix missing RTNL protection across some tipc operations, from Ying
    Xue.

 9) Return the correct IV bytes in the TLS getsockopt code, from Boris
    Pismenny.

10) Take tclassid into consideration properly when doing FIB rule
    matching. From Stefano Brivio.

11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom.

12) TUN driver doesn't align frags properly, and we can end up doing
    unaligned atomics on misaligned metadata. From Eric Dumazet.

13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from
    Subash Abhinov Kasiviswanathan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  tg3: APE heartbeat changes
  mlxsw: spectrum_router: Do not unconditionally clear route offload indication
  net: qualcomm: rmnet: Fix possible null dereference in command processing
  net: qualcomm: rmnet: Fix warning seen with 64 bit stats
  net: qualcomm: rmnet: Fix crash on real dev unregistration
  sctp: remove the left unnecessary check for chunk in sctp_renege_events
  rxrpc: Work around usercopy check
  tun: fix tun_napi_alloc_frags() frag allocator
  udplite: fix partial checksum initialization
  skbuff: Fix comment mis-spelling.
  dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock
  PCI/cxgb4: Extend T3 PCI quirk to T4+ devices
  cxgb4: fix trailing zero in CIM LA dump
  cxgb4: free up resources of pf 0-3
  fib_semantics: Don't match route with mismatching tclassid
  NFC: llcp: Limit size of SDP URI
  tls: getsockopt return record sequence number
  tls: reset the crypto info if copy_from_user fails
  tls: retrun the correct IV in getsockopt
  docs: segmentation-offloads.txt: add SCTP info
  ...

syzbot reported a scheduling while atomic issue at netns
destruction time:

BUG: sleeping function called from invalid context at net/core/sock.c:2769
in_atomic(): 1, irqs_disabled(): 0, pid: 85, name: kworker/u4:3
5 locks held by kworker/u4:3/85:
  #0:  ((wq_completion)"%s""netns"){+.+.}, at: [<00000000c9792deb>]
process_one_work+0xaaf/0x1af0 kernel/workqueue.c:2084
  #1:  (net_cleanup_work){+.+.}, at: [<00000000adc12e2a>]
process_one_work+0xb01/0x1af0 kernel/workqueue.c:2088
  #2:  (net_sem){++++}, at: [<000000009ccb5669>] cleanup_net+0x23f/0xd20
net/core/net_namespace.c:494
  #3:  (net_mutex){+.+.}, at: [<00000000a92767d9>] cleanup_net+0xa7d/0xd20
net/core/net_namespace.c:496
  #4:  (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>]
spin_lock_bh include/linux/spinlock.h:315 [inline]
  #4:  (&(&srv->idr_lock)->rlock){+...}, at: [<000000001343e568>]
tipc_topsrv_stop+0x231/0x610 net/tipc/topsrv.c:685
CPU: 0 PID: 85 Comm: kworker/u4:3 Not tainted 4.16.0-rc1+ #230
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
  __dump_stack lib/dump_stack.c:17 [inline]
  dump_stack+0x194/0x257 lib/dump_stack.c:53
  ___might_sleep+0x2b2/0x470 kernel/sched/core.c:6128
  __might_sleep+0x95/0x190 kernel/sched/core.c:6081
  lock_sock_nested+0x37/0x110 net/core/sock.c:2769
  lock_sock include/net/sock.h:1463 [inline]
  tipc_release+0x103/0xff0 net/tipc/socket.c:572
  sock_release+0x8d/0x1e0 net/socket.c:594
  tipc_topsrv_stop+0x3c0/0x610 net/tipc/topsrv.c:696
  tipc_exit_net+0x15/0x40 net/tipc/core.c:96
  ops_exit_list.isra.6+0xae/0x150 net/core/net_namespace.c:148
  cleanup_net+0x6ba/0xd20 net/core/net_namespace.c:529
  process_one_work+0xbbf/0x1af0 kernel/workqueue.c:2113
  worker_thread+0x223/0x1990 kernel/workqueue.c:2247
  kthread+0x33c/0x400 kernel/kthread.c:238
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:429

This is caused by tipc_topsrv_stop() releasing the listener socket
with the idr lock held. This changeset addresses the issue moving
the release operation outside such lock.

Reported-and-tested-by: syzbot+749d9d87c294c00ca856@syzkaller.appspotmail.com
Fixes: 0ef897be ("tipc: separate topology server listener socket from subcsriber sockets")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by:  ///jon
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit cc1ea9ffadf7 ("tipc: eliminate struct tipc_subscriber") we
re-introduced an old bug on the error path in the function
tipc_topsrv_kern_subscr(). We now re-introduce the correction too.

Reported-by: syzbot+f62e0f2a0ef578703946@syzkaller.appspotmail.com
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Kirill Tkhai says:

====================
Converting pernet_operations (part #2)

This patchset continues to review and to convert pernet_operations
to async. There are mostly ipv6, also some regular used netfilter
pernet_operations are involved. One more converted is cfg80211_pernet_ops.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations register and unregister
net::ipv4.iptable_filter table. Since there are
no packets in-flight at the time of exit method
is working, iptables rules should not be touched.
Also, pernet_operations should not send ipv4
packets each other. So, it's safe to mark them
async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ip_tables_net_ops and udplite6_net_ops create and destroy /proc entries.
xt_net_ops does nothing.

So, we are able to mark them async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Exit methods calls inet_frags_exit_net() with global ip6_frags
as argument. So, after we make the pernet_operations async,
a pair of exit methods may be called to iterate this hash table.
Since there is inet_frag_worker(), which already may work
in parallel with inet_frags_exit_net(), and it can make the same
cleanup, that inet_frags_exit_net() does, it's safe. So we may
mark these pernet_operations as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations register and unregister tables
and lists for packets forwarding. All of the entities
are per-net. Init methods makes simple initializations,
and since net is not visible for foreigners at the time
it is working, it can't race with anything. Exit method
is executed when there are only local devices, and there
mustn't be packets in-flight. Also, it looks like no one
pernet_operations want to send ipv6 packets to foreign
net. The same reasons are for ipv6_addr_label_ops and
ip6_segments_ops. So, we are able to mark all them as
async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create sysctl tables and
initialize net::xfrm.xfrm6_dst_ops used for routing.
It doesn't look like another pernet_operations send
ipv6 packets to foreign net namespaces, so it should
be safe to mark the pernet_operations as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create and destroy /proc entries.
ip6_fl_purge() makes almost the same actions as timer
ip6_fl_gc_timer does, and as it can be executed in parallel
with ip6_fl_purge(), two parallel ip6_fl_purge() may be
executed. So, we can mark it async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations only register and unregister /proc
entries, so it's possible to mark them async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create and destroy sysctl tables.
They are not touched by another net pernet_operations.
So, it's possible to execute them in parallel with others.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create and destroy net::ipv6.tcp_sk
socket, which is used in tcp_v6_send_response() only. It looks
like foreign pernet_operations don't want to set ipv6 connection
inside destroyed net, so this socket may be created in destroyed
in parallel with anything else. inet_twsk_purge() is also safe
for that, as described in patch for tcp_sk_ops. So, it's possible
to mark them as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations register and unregister
net::ipv6.fib6_rules_ops, which are used for
routing. It looks like there are no pernet_operations,
which send ipv6 packages to another net, so we
are able to mark them as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net->ipv6.peers is dereferenced in three places via inet_getpeer_v6(),
and it's used to handle skb. All the users of inet_getpeer_v6() do not
look like be able to be called from foreign net pernet_operations, so
we may mark them as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net: Convert raw6_net_ops, udplite6_net_ops, ipv6_proc_ops, if6_proc_net_ops and ip6_route_net_late_ops

These pernet_operations create and destroy /proc entries
and safely may be converted and safely may be mark as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create and destroy net::ipv6.icmp_sk
socket, used to send ICMP or error reply.

Nobody can dereference the socket to handle a packet before
net is initialized, as there is no routing; nobody can do
that in parallel with exit, as all of devices are moved
to init_net or destroyed and there are no packets it-flight.
So, it's possible to mark these pernet_operations as async.

The same for ndisc_net_ops and for igmp6_net_ops. The last
one also creates and destroys /proc entries.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create and destroy /proc entries,
populate and depopulate net::rules_ops and multiroute table.
All the structures are pernet, and they are not touched
by foreign net pernet_operations. So, it's possible to mark
them async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch finishes converting pernet_operations
registered in net/wireless directory.

These pernet_operations have only exit method,
which moves devices to init_net. This action
is not pernet_operations-specific, and function
cfg80211_switch_netns() may be called all time
during the system life. All necessary protection
against concurrent cfg80211_pernet_exit() is made
by rtnl_lock(). So, cfg80211_pernet_ops is able
to be marked as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

init method initializes sysctl defaults, allocates
percpu arrays and creates /proc entries.
exit method reverts the above.

There are no pernet_operations, which are interested
in the above entities of foreign net namespace, so
inet6_net_ops are able to be marked as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>