- 29 5月, 2009 21 次提交
-
-
由 Tony Lindgren 提交于
Conflicts: arch/arm/mach-omap2/Makefile
-
由 Andrew de Quincey 提交于
Make 770 LCD work by adding clk_add_alias(). Also remove the old unused functions. Note that the clk_add_alias() could probably be moved to arch/arm/clkdev.c later on. Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NImre Deak <imre.deak@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com
-
由 Tony Lindgren 提交于
Add some entries to MAINTAINERS. Also regroup all omap entries together, and remove an inactive MMC maintainers entry, and Jarkko Lavinen instead. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Imre Deak 提交于
Based on an earlier patch by Hunyue Yau <hyau@mvista.com> with board-*.c changes split to avoid conflicts with other device updates. Cc: linux-fbdev-devel@lists.sourceforge.net Signed-off-by: NHunyue Yau <hyau@mvista.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NImre Deak <imre.deak@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Convert the board-rx51 smc91x code to be generic and make the boards to use it. This allows future recalculation of the timings when the source clock gets scaled. Also correct the rx51 interrupt to be IORESOURCE_IRQ_HIGHLEVEL. Thanks to Paul Walmsley <paul@pwsan.com> for better GPMC timing calculations. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Juha Yrjola 提交于
Add generic onenand support when connected to GPMC and make the boards to use it. The patch has been modified to make it more generic to support all the boards with GPMC. The patch also remove unused prototype for omap2_onenand_rephase(void). Note that board-apollon.c is currently using the MTD_ONENAND_GENERIC and setting the GPMC timings in the bootloader. Setting the GPMC timings in the bootloader will not allow supporting frequency scaling for the onenand source clock. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
Original OMAP DMA chaining design had chain_id as one of the callback parameters. Patch 538528de changed it to use logical channel instead. Correct the naming for callback to also use logical channel number instead of the chain_id. More details are on this email thread: http://marc.info/?l=linux-omap&m=122961071931459&w=2Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tomi Valkeinen 提交于
Implement transparent copy and constant fill features for OMAP2/3. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Kevin Hilman 提交于
Update OMAP1-specific PM infrastructure. This is a sync of what is in linux-omap for OMAP1. This mostly de-couples OMAP1 PM from OMAP2/3 PM and renames things accordingly, and removes omap2/3 specific code from OMAP1 specific headers. Original OMAP1 decoupling patch for OMAP PM branch by Paul Walmsley. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
By default, prevent functional wakeups from inside a module from waking up the IVA2. Let DSP Bridge code handle this when loaded. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Peter 'p2' De Schrijver 提交于
Otherwise, bootloaders may leave MUSB in a state which prevents retention. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
Add D2D clocks (modem_fck, sad2d_ick, mad2d_ick) to clock framework and ensure that auto-idle bits are set for these clocks during PRCM init. Also add omap3_d2d_idle() function called durint PRCM setup which ensures D2D pins are MUX'd correctly to enable retention for standalone (no-modem) devices. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Jouni Hogander 提交于
This patch makes it possible to change uart sleep timeout. New sysfs entry is added (/sys/devices/platform/serial8250.<uart>/sleep_timeout) Writing zero will disable the timeout feature and prevent UART clocks from being disabled. Also default timeout is increased to 5 second to make serial console more usable. Original patch was written by Tero Kristo. Cc: Tero Kristo <Tero.Kristo@nokia.com> Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
This patch allows the UART clocks to be disabled when the OMAP UARTs are inactive, thus permitting the chip to hit retention in idle. After the expiration of an activity timer, each UART is allowed to disable its clocks so the system can enter retention. The activity timer is (re)activated on any UART interrupt, UART wake event or any IO pad wakeup. The actual disable of the UART clocks is done in the 'prepare_idle' hook called from the OMAP idle loop. While the activity timer is active, the smart-idle mode of the UART is also disabled. This is due to a "feature" of the UART module that after a UART wakeup, the smart-idle mode may be entered before the UART has communicated the interrupt, or upon TX, an idle mode may be entered before the TX FIFOs are emptied. Upon suspend, the 'prepare_suspend' hook cancels any pending activity timers and allows the clocks to be disabled immediately. In addition, upon disabling clocks the UART state is saved in case of an off-mode transition while clocks are off. Special thanks to Tero Kristo for the initial ideas and first versions of UART idle support, and to Jouni Hogander for extra testing and bugfixes. Tested on OMAP3 (Beagle, RX51, SDP, EVM) and OMAP2 (n810) Cc: Tero Kristo <tero.kristo@nokia.com> Cc: Jouni Hogander <jouni.hogander@nokia.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Jouni Hogander 提交于
Add common omap2/3 function to check wether there is irq pending. Switch to use it in omap2 pm code instead of its own. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
由 Kevin Hilman 提交于
This patch is to sync the core linux-omap PM code with mainline. This code has evolved and been used for a while the linux-omap tree, but the attempt here is to finally get this into mainline. Following this will be a series of patches from the 'PM branch' of the linux-omap tree to add full PM hardware support from the linux-omap tree. Much of this PM core code was written by Jouni Hogander with significant contributions from Paul Walmsley as well as many others from Nokia, Texas Instruments and linux-omap community. Signed-off-by: NJouni Hogander <jouni.hogander@nokia.com> Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
- 27 5月, 2009 2 次提交
-
-
由 Kevin Hilman 提交于
This reverts commit 5461af5a. Adding a disable hook to the irq_chip is not the way to fix the problem being addressed by this patch. Instead, we need to fix support for [enable|disable]_irq_wake(). Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
-
-
- 26 5月, 2009 17 次提交
-
-
由 Santosh Shilimkar 提交于
This patch removes unnecessary omap2_globals and pass the global structures directly as function argument. The proposed cleanup was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch removes fixes omap_sram_error() function and replace the error paths with BUG_ON. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch fixes the compiler warning "assignment from incompatible pointer type" in dmtimer.c and removes the tye casts. These warnings were suppressed by type catsing. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
We don't necessarily want to compile in irq.o and sdrc.o for omap4. Also, clock and prcm may not be implemented initially. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Processor specific macros should be used instead. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
It's currently unused, and processor specific defines should be used instead. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Move define of OMAP2_VA_IC_BASE to be local to entry-macro.S Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Remove OMAP_PRM_REGADDR and use processor specific defines instead. Also fold in a patch from Kevin Hilman to add _OFFSET #defines for the PRCM registers to be used with the prm_[read|write]_* macros. These are used extensively in the forthcoming OMAP PM support. Also remove now unused OMAP2_PRM_BASE. Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Use processor specific defines instead. As an extra bonus, this patch fixes the problem of CONFIG_DEBUG_SPINLOCK calling sched_clock before we have things initialized: http://patchwork.kernel.org/patch/15810/Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
Remove unnecessary Kconfig line and allow compile of MBOX_FWK. Also allow building USB on Nokia 770. Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Jarkko Nikula 提交于
This email address is going to expire soon so update it. Signed-off-by: NJarkko Nikula <jarkko.nikula@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Eero Nurkkala 提交于
If XSYNCERR or RSYNCERR interrupts are enabled, they are never cleared causing the IRQ handler to be continuously called. This patch clears the IRQs in question in the event they are enabled and taken. Signed-off-by: NEero Nurkkala <ext-eero.nurkkala@nokia.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Mans Rullgard 提交于
This increases VMALLOC_END to 0x18000000, making room for 256MB RAM with the default 128MB vmalloc region. Note that after this patch there's no longer a hole between vmalloc space and the beginning of IO space on omap2 as the first virtual mapping starts at 0xd8000000. Also fold in a related change from Paul Walmsley <paul@pwsan.com> to change the OMAP2_SRAM addresses accordingly. Signed-off-by: NMans Rullgard <mans@mansr.com> Signed-off-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NKevin Hilman <khilman@deeprootsystems.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch removes unnecessary omap2_globals and pass the global structures directly as function argument. The proposed cleanup was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch removes fixes omap_sram_error() function and replace the error paths with BUG_ON. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Santosh Shilimkar 提交于
This patch fixes the compiler warning "assignment from incompatible pointer type" in dmtimer.c and removes the tye casts. These warnings were suppressed by type catsing. The proposed fix was suggested by Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: NTony Lindgren <tony@atomide.com>
-
由 Tony Lindgren 提交于
We don't necessarily want to compile in irq.o and sdrc.o for omap4. Also, clock and prcm may not be implemented initially. Signed-off-by: NTony Lindgren <tony@atomide.com>
-