Pull sound fixes from Takashi Iwai:
 "Except for a slightly big OMAP changes, all rest are small, mostly
  boring changes; all either 3.11 regression fixes or stable materials.

   - ASoC OMAP fixes due to non-DT OMAP4 removals
   - Other ASoC driver changes (sglt5000, wm8978, wm8948, samsung)
   - Fix missing locking for snd_pcm_stop() calls in many drivers
   - Fix the blocking request_module() in OSS sequencer
   - Fix old OSS vwsnd driver builds
   - Add a new HD-audio HDMI codec ID"

* tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
  ALSA: seq-oss: Initialize MIDI clients asynchronously
  ALSA: hda - Add new GPU codec ID to snd-hda
  staging: line6: Fix unlocked snd_pcm_stop() call
  [media] saa7134: Fix unlocked snd_pcm_stop() call
  ASoC: s6000: Fix unlocked snd_pcm_stop() call
  ASoC: atmel: Fix unlocked snd_pcm_stop() call
  ALSA: pxa2xx: Fix unlocked snd_pcm_stop() call
  ALSA: usx2y: Fix unlocked snd_pcm_stop() call
  ALSA: ua101: Fix unlocked snd_pcm_stop() call
  ALSA: 6fire: Fix unlocked snd_pcm_stop() call
  ALSA: atiixp: Fix unlocked snd_pcm_stop() call
  ALSA: asihpi: Fix unlocked snd_pcm_stop() call
  sound: oss/vwsnd: Always define vwsnd_mutex
  sound: oss/vwsnd: Add missing inclusion of linux/delay.h
  ASoC: wm8978: enable symmetric rates
  ASoC: omap-mcbsp: Use different method for DMA request when booted with DT
  ASoC: omap-dmic: Do not use platform_get_resource_byname() for DMA
  ASoC: omap-mcpdm: Do not use platform_get_resource_byname() for DMA
  ASoC: omap-pcm: Request the DMA channel differently when DT is involved
  ASoC: Samsung: Set RFS and BFS in slave mode
  ...

Pull nfsd bugfixes from Bruce Fields:
 "Just three minor bugfixes"

* 'for-3.11' of git://linux-nfs.org/~bfields/linux:
  svcrdma: underflow issue in decode_write_list()
  nfsd4: fix minorversion support interface
  lockd: protect nlm_blocked access in nlmsvc_retry_blocked

We've got bug reports that the module loading stuck on Debian system
with 3.10 kernel.  The debugging session revealed that the initial
registration of OSS sequencer clients stuck at module loading time,
which involves again with request_module() at the init phase.  This is
triggered only by special --install stuff Debian is using, but it's
still not good to have such loops.

As a workaround, call the registration part asynchronously.  This is a
better approach irrespective of the hang fix, in anyway.
Reported-and-tested-by: NPhilipp Matthias Hahn <pmhahn@pmhahn.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

__list_for_each used to be the non prefetch() aware list walking
primitive.  When we removed the prefetch macros from the list routines,
it became redundant.  Given it does exactly the same thing as
list_for_each now, we might as well remove it and call list_for_each
directly.

All users of __list_for_each have been converted to list_for_each calls
in the current merge window.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NSteven Miao <realmz6@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Vendor ID 0x10de0060 is used by a yet-to-be-named GPU chip.
Reviewed-by: NAndy Ritger <aritger@nvidia.com>
Signed-off-by: NAaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull regmap fix from Mark Brown:
 "Fix regmap crash for async operation on busless maps

  This fixes a crash if something tries to do an asynchronous operation
  on busless maps which was introduced during the merge window"

* tag 'regmap-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: cache: bail in regmap_async_complete() for bus-less maps

Pull spi fixes from Mark Brown:
 "A couple of things missed during the v3.11 work here:

   - The spi-bitbang core requires a setup() function even if it does
     nothing which caused breakage when some empty setup functions were
     removed after their contents were factored out into the core.

     While this is clearly silly and will be fixed for v3.12 for now we
     just restore the functions.

   - A missing case handled in the s3c64xx driver"

* tag 'spi-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: revert master->setup function removal for altera and nuc900
  spi/xilinx: Revert master->setup function removal
  spi: s3c64xx: add missing check for polling mode

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: NMark Brown <broonie@linaro.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Acked-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

snd_pcm_stop() must be called in the PCM substream lock context.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

My static checker marks everything from ntohl() as untrusted and it
complains we could have an underflow problem doing:

	return (u32 *)&ary->wc_array[nchunks];

Also on 32 bit systems the upper bound check could overflow.

Cc: stable@vger.kernel.org
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>

Merge tag 'asoc-v3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.11

The biggest change here is the OMAP change, these are larger than I'd
have liked but make the driver actually usable - during the merge window
OMAP removed support for non-DT OMAP4 boards but in doing so removed the
method of accessing DMA channels used by the ASoC drivers rendering them
unusuable.

Otherwise nothing exciting, the symmetric rates change for WM8978 is a
fix for the information we expose to userspace.

While the conversion of BKL to mutex in commit 645ef9ef, the mutex
definition was put in a wrong place inside #ifdef WSND_DEBUG, which
leads to the build error.  Just move it outside the ifdef.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Pull ext4 bugfixes from Ted Ts'o:
 "Various regression and bug fixes for ext4"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: don't allow ext4_free_blocks() to fail due to ENOMEM
  ext4: fix spelling errors and a comment in extent_status tree
  ext4: rate limit printk in buffer_io_error()
  ext4: don't show usrquota/grpquota twice in /proc/mounts
  ext4: fix warning in ext4_evict_inode()
  ext4: fix ext4_get_group_number()
  ext4: silence warning in ext4_writepages()

Pull slab update from Pekka Enberg:
 "Highlights:

  - Fix for boot-time problems on some architectures due to
    init_lock_keys() not respecting kmalloc_caches boundaries
    (Christoph Lameter)

  - CONFIG_SLUB_CPU_PARTIAL requested by RT folks (Joonsoo Kim)

  - Fix for excessive slab freelist draining (Wanpeng Li)

  - SLUB and SLOB cleanups and fixes (various people)"

I ended up editing the branch, and this avoids two commits at the end
that were immediately reverted, and I instead just applied the oneliner
fix in between myself.

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux
  slub: Check for page NULL before doing the node_match check
  mm/slab: Give s_next and s_stop slab-specific names
  slob: Check for NULL pointer before calling ctor()
  slub: Make cpu partial slab support configurable
  slab: add kmalloc() to kernel API documentation
  slab: fix init_lock_keys
  slob: use DIV_ROUND_UP where possible
  slub: do not put a slab to cpu partial list when cpu_partial is 0
  mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo
  mm/slub: Drop unnecessary nr_partials
  mm/slab: Fix /proc/slabinfo unwriteable for slab
  mm/slab: Sharing s_next and s_stop between slab and slub
  mm/slab: Fix drain freelist excessively
  slob: Rework #ifdeffery in slab.h
  mm, slab: moved kmem_cache_alloc_node comment to correct place

In the -rt kernel (mrg), we hit the following dump:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180
PGD a2d39067 PUD b1641067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: sunrpc cpufreq_ondemand ipv6 tg3 joydev sg serio_raw pcspkr k8temp amd64_edac_mod edac_core i2c_piix4 e100 mii shpchp ext4 mbcache jbd2 sd_mod crc_t10dif sr_mod cdrom sata_svw ata_generic pata_acpi pata_serverworks radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod
CPU 3
Pid: 20878, comm: hackbench Not tainted 3.6.11-rt25.14.el6rt.x86_64 #1 empty empty/Tyan Transport GT24-B3992
RIP: 0010:[<ffffffff811573f1>]  [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180
RSP: 0018:ffff8800a9b17d70  EFLAGS: 00010213
RAX: 0000000000000000 RBX: 0000000001200011 RCX: ffff8800a06d8000
RDX: 0000000004d92a03 RSI: 00000000000000d0 RDI: ffff88013b805500
RBP: ffff8800a9b17dc0 R08: ffff88023fd14d10 R09: ffffffff81041cbd
R10: 00007f4e3f06e9d0 R11: 0000000000000246 R12: ffff88013b805500
R13: ffff8801ff46af40 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f4e3f06e700(0000) GS:ffff88023fd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000000 CR3: 00000000a2d3a000 CR4: 00000000000007e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process hackbench (pid: 20878, threadinfo ffff8800a9b16000, task ffff8800a06d8000)
Stack:
 ffff8800a9b17da0 ffffffff81202e08 ffff8800a9b17de0 000000d001200011
 0000000001200011 0000000001200011 0000000000000000 0000000000000000
 00007f4e3f06e9d0 0000000000000000 ffff8800a9b17e60 ffffffff81041cbd
Call Trace:
 [<ffffffff81202e08>] ? current_has_perm+0x68/0x80
 [<ffffffff81041cbd>] copy_process+0xdd/0x15b0
 [<ffffffff810a2125>] ? rt_up_read+0x25/0x30
 [<ffffffff8104369a>] do_fork+0x5a/0x360
 [<ffffffff8107c66b>] ? migrate_enable+0xeb/0x220
 [<ffffffff8100b068>] sys_clone+0x28/0x30
 [<ffffffff81527423>] stub_clone+0x13/0x20
 [<ffffffff81527152>] ? system_call_fastpath+0x16/0x1b
Code: 89 fc 89 75 cc 41 89 d6 4d 8b 04 24 65 4c 03 04 25 48 ae 00 00 49 8b 50 08 4d 8b 28 49 8b 40 10 4d 85 ed 74 12 41 83 fe ff 74 27 <48> 8b 00 48 c1 e8 3a 41 39 c6 74 1b 8b 75 cc 4c 89 c9 44 89 f2
RIP  [<ffffffff811573f1>] kmem_cache_alloc_node+0x51/0x180
 RSP <ffff8800a9b17d70>
CR2: 0000000000000000
---[ end trace 0000000000000002 ]---

Now, this uses SLUB pretty much unmodified, but as it is the -rt kernel
with CONFIG_PREEMPT_RT set, spinlocks are mutexes, although they do
disable migration. But the SLUB code is relatively lockless, and the
spin_locks there are raw_spin_locks (not converted to mutexes), thus I
believe this bug can happen in mainline without -rt features. The -rt
patch is just good at triggering mainline bugs ;-)

Anyway, looking at where this crashed, it seems that the page variable
can be NULL when passed to the node_match() function (which does not
check if it is NULL). When this happens we get the above panic.

As page is only used in slab_alloc() to check if the node matches, if
it's NULL I'm assuming that we can say it doesn't and call the
__slab_alloc() code. Is this a correct assumption?
Acked-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NPekka Enberg <penberg@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull more vfs stuff from Al Viro:
 "O_TMPFILE ABI changes, Oleg's fput() series, misc cleanups, including
  making simple_lookup() usable for filesystems with non-NULL s_d_op,
  which allows us to get rid of quite a bit of ugliness"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sunrpc: now we can just set ->s_d_op
  cgroup: we can use simple_lookup() now
  efivarfs: we can use simple_lookup() now
  make simple_lookup() usable for filesystems that set ->s_d_op
  configfs: don't open-code d_alloc_name()
  __rpc_lookup_create_exclusive: pass string instead of qstr
  rpc_create_*_dir: don't bother with qstr
  llist: llist_add() can use llist_add_batch()
  llist: fix/simplify llist_add() and llist_add_batch()
  fput: turn "list_head delayed_fput_list" into llist_head
  fs/file_table.c:fput(): add comment
  Safer ABI for O_TMPFILE

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>