- 18 10月, 2007 7 次提交
-
-
由 Sam Ravnborg 提交于
Introduce a consistent layout of vmlinux. The same layout has been introduced for most architectures. And the same time move a few label definitions inside the curly brackets so they are assigned the correct starting address. Before a ld inserted alignment would have casued the label to pint before the actual start of the section. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
If we already have NR_CPUS worth of cpus online, we obviously shouldn't be trying to bring up more... Fixes a particularly vexing issue I had when running another machines kernel on my rp3440. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Clean up a pointless use of a variable in update_cr16_clocksource. It just looks silly. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Currently we're hacking libs-y to include libgcc.a, but this has unforeseen consequences since the userspace libgcc is linked with fpregs enabled. We need the kernel to stop using fpregs in an uncontrolled manner to implement lazy fpu state saves. Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Christoph Lameter 提交于
Slab pages obtained via kmalloc are not cacheline aligned. Nor is it advisable to perform VM operations designed for page allocator pages on memory obtained via kmalloc. So replace the page sized allocations in kernel/pci-dma.c with page allocator pages. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Matthew Wilcox <willy@debian.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@mcmartin.ca>
-
- 17 10月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
Identical handlers of PTRACE_DETACH go into ptrace_request(). Not touching compat code. Not touching archs that don't call ptrace_request. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 8月, 2007 2 次提交
-
-
由 Kyle McMartin 提交于
Bisected bizarre kernel-space nullptr dereference in udev to commit 18991197, adding the NOTES section fixes it. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Switch to using the generic compat_sys_getdents instead of a homebrew one. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 30 7月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
Remove fs.h from mm.h. For this, 1) Uninline vma_wants_writenotify(). It's pretty huge anyway. 2) Add back fs.h or less bloated headers (err.h) to files that need it. As result, on x86_64 allyesconfig, fs.h dependencies cut down from 3929 files rebuilt down to 3444 (-12.3%). Cross-compile tested without regressions on my two usual configs and (sigh): alpha arm-mx1ads mips-bigsur powerpc-ebony alpha-allnoconfig arm-neponset mips-capcella powerpc-g5 alpha-defconfig arm-netwinder mips-cobalt powerpc-holly alpha-up arm-netx mips-db1000 powerpc-iseries arm arm-ns9xxx mips-db1100 powerpc-linkstation arm-assabet arm-omap_h2_1610 mips-db1200 powerpc-lite5200 arm-at91rm9200dk arm-onearm mips-db1500 powerpc-maple arm-at91rm9200ek arm-picotux200 mips-db1550 powerpc-mpc7448_hpc2 arm-at91sam9260ek arm-pleb mips-ddb5477 powerpc-mpc8272_ads arm-at91sam9261ek arm-pnx4008 mips-decstation powerpc-mpc8313_rdb arm-at91sam9263ek arm-pxa255-idp mips-e55 powerpc-mpc832x_mds arm-at91sam9rlek arm-realview mips-emma2rh powerpc-mpc832x_rdb arm-ateb9200 arm-realview-smp mips-excite powerpc-mpc834x_itx arm-badge4 arm-rpc mips-fulong powerpc-mpc834x_itxgp arm-carmeva arm-s3c2410 mips-ip22 powerpc-mpc834x_mds arm-cerfcube arm-shannon mips-ip27 powerpc-mpc836x_mds arm-clps7500 arm-shark mips-ip32 powerpc-mpc8540_ads arm-collie arm-simpad mips-jazz powerpc-mpc8544_ds arm-corgi arm-spitz mips-jmr3927 powerpc-mpc8560_ads arm-csb337 arm-trizeps4 mips-malta powerpc-mpc8568mds arm-csb637 arm-versatile mips-mipssim powerpc-mpc85xx_cds arm-ebsa110 i386 mips-mpc30x powerpc-mpc8641_hpcn arm-edb7211 i386-allnoconfig mips-msp71xx powerpc-mpc866_ads arm-em_x270 i386-defconfig mips-ocelot powerpc-mpc885_ads arm-ep93xx i386-up mips-pb1100 powerpc-pasemi arm-footbridge ia64 mips-pb1500 powerpc-pmac32 arm-fortunet ia64-allnoconfig mips-pb1550 powerpc-ppc64 arm-h3600 ia64-bigsur mips-pnx8550-jbs powerpc-prpmc2800 arm-h7201 ia64-defconfig mips-pnx8550-stb810 powerpc-ps3 arm-h7202 ia64-gensparse mips-qemu powerpc-pseries arm-hackkit ia64-sim mips-rbhma4200 powerpc-up arm-integrator ia64-sn2 mips-rbhma4500 s390 arm-iop13xx ia64-tiger mips-rm200 s390-allnoconfig arm-iop32x ia64-up mips-sb1250-swarm s390-defconfig arm-iop33x ia64-zx1 mips-sead s390-up arm-ixp2000 m68k mips-tb0219 sparc arm-ixp23xx m68k-amiga mips-tb0226 sparc-allnoconfig arm-ixp4xx m68k-apollo mips-tb0287 sparc-defconfig arm-jornada720 m68k-atari mips-workpad sparc-up arm-kafa m68k-bvme6000 mips-wrppmc sparc64 arm-kb9202 m68k-hp300 mips-yosemite sparc64-allnoconfig arm-ks8695 m68k-mac parisc sparc64-defconfig arm-lart m68k-mvme147 parisc-allnoconfig sparc64-up arm-lpd270 m68k-mvme16x parisc-defconfig um-x86_64 arm-lpd7a400 m68k-q40 parisc-up x86_64 arm-lpd7a404 m68k-sun3 powerpc x86_64-allnoconfig arm-lubbock m68k-sun3x powerpc-cell x86_64-defconfig arm-lusl7200 mips powerpc-celleb x86_64-up arm-mainstone mips-atlas powerpc-chrp32 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 1 次提交
-
-
由 Fenghua Yu 提交于
per cpu data section contains two types of data. One set which is exclusively accessed by the local cpu and the other set which is per cpu, but also shared by remote cpus. In the current kernel, these two sets are not clearely separated out. This can potentially cause the same data cacheline shared between the two sets of data, which will result in unnecessary bouncing of the cacheline between cpus. One way to fix the problem is to cacheline align the remotely accessed per cpu data, both at the beginning and at the end. Because of the padding at both ends, this will likely cause some memory wastage and also the interface to achieve this is not clean. This patch: Moves the remotely accessed per cpu data (which is currently marked as ____cacheline_aligned_in_smp) into a different section, where all the data elements are cacheline aligned. And as such, this differentiates the local only data and remotely accessed data cleanly. Signed-off-by: NFenghua Yu <fenghua.yu@intel.com> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: <linux-arch@vger.kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 3 次提交
-
-
由 Tejun Heo 提交于
KSYM_NAME_LEN is peculiar in that it does not include the space for the trailing '\0', forcing all users to use KSYM_NAME_LEN + 1 when allocating buffer. This is nonsense and error-prone. Moreover, when the caller forgets that it's very likely to subtly bite back by corrupting the stack because the last position of the buffer is always cleared to zero. This patch increments KSYM_NAME_LEN by one and updates code accordingly. * off-by-one bug in asm-powerpc/kprobes.h::kprobe_lookup_name() macro is fixed. * Where MODULE_NAME_LEN and KSYM_NAME_LEN were used together, MODULE_NAME_LEN was treated as if it didn't include space for the trailing '\0'. Fix it. Signed-off-by: NTejun Heo <htejun@gmail.com> Acked-by: NPaulo Marques <pmarques@grupopie.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexey Dobriyan 提交于
Identical implementations of PTRACE_PEEKDATA go into generic_ptrace_peekdata() function. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Pavel Emelianov 提交于
If the kernel OOPSed or BUGed then it probably should be considered as tainted. Thus, all subsequent OOPSes and SysRq dumps will report the tainted kernel. This saves a lot of time explaining oddities in the calltraces. Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> [ Added parisc patch from Matthew Wilson -Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 7月, 2007 1 次提交
-
-
由 Heiko Carstens 提交于
The current generic bug implementation has a call to dump_stack() in case a WARN_ON(whatever) gets hit. Since report_bug(), which calls dump_stack(), gets called from an exception handler we can do better: just pass the pt_regs structure to report_bug() and pass it to show_regs() in case of a warning. This will give more debug informations like register contents, etc... In addition this avoids some pointless lines that dump_stack() emits, since it includes a stack backtrace of the exception handler which is of no interest in case of a warning. E.g. on s390 the following lines are currently always present in a stack backtrace if dump_stack() gets called from report_bug(): [<000000000001517a>] show_trace+0x92/0xe8) [<0000000000015270>] show_stack+0xa0/0xd0 [<00000000000152ce>] dump_stack+0x2e/0x3c [<0000000000195450>] report_bug+0x98/0xf8 [<0000000000016cc8>] illegal_op+0x1fc/0x21c [<00000000000227d6>] sysc_return+0x0/0x10 Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Acked-by: NHaavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andi Kleen <ak@suse.de> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 6月, 2007 2 次提交
-
-
由 Randolph Chung 提交于
Add special-case handling for "handle_interruption" so that we can rewind past the interruption. This is useful for seeing what caused a BUG() or WARN_ON(); otherwise the unwind stops at the interruption. Signed-off-by: NRandolph Chung <tausq@debian.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Randolph Chung 提交于
The unwinder was broken by the shift of PAGE_OFFSET in order to increase the size of the vmalloc area on 64-bit kernels. Signed-off-by: NRandolph Chung <tausq@debian.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 12 6月, 2007 1 次提交
-
-
由 Grant Grundler 提交于
Kudos to Thibaut Varene for spotting the (mis)use of appropriately named global_ack_eiem. This took a long time to figure out and both insight from myself, Kyle McMartin, and James Bottomley were required to narrow down which bit of code could have this race condition. The symptom was interrupts stopped getting delivered while some workload was generating IO interrupts on two different CPUs. One of the interrupt sources would get masked off and stay unmasked. Problem was global_ack_eiem was accessed with read/modified/write sequence and not protected by a spinlock. PA-RISC doesn't need a global ack flag though. External Interrupts are _always_ delivered to a single CPU (except for "global broadcast interrupt" which AFAIK currently is not used.) So we don't have to worry about any given IRQ vector getting delivered to more than one CPU. Tested on a500 and rp34xx boxen. rsync to/from gsyprf11 (a500) would lock up the box since NIC (tg3) interrupt and SCSI (sym2) were on "opposite" CPUs (2 CPU system). Put them on the same CPU or apply this patch and 10GB of data would rsync completely. Please apply the following critical patch. thanks, grant Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> Acked-by: NThibaut VARENE <T-Bone@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 04 6月, 2007 2 次提交
-
-
由 Kyle McMartin 提交于
check_ivt had some seriously broken code wrt function pointers on parisc64. Instead of referencing the hpmc code via a function pointer, export symbols and reference it as a const array. Thanks to jda for pointing out the broken 64-bit func ptr handling. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
The bug was that we were comparing __NR_syscalls to be greater or equal to the syscall number stored in %r20. __NR_syscalls is one greater than the last syscall though, so we're loading one entry beyond the end of the syscall table, and trying to jump to it. Fix this by only checking that we're greater, alternatively, we could have compared to (__NR_Linux_syscalls - 1) Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 30 5月, 2007 5 次提交
-
-
由 Kyle McMartin 提交于
While debugging, I noticed we don't check the task_struct arg passed to get_wchan, whereas everyone else does. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Amazingly, parisc was the only arch effected by this... Convert register-sized loads/stores to always be 32-bit for these fields. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
commit ffb45122 removed one too many args. kallsyms_lookup is not safe to call with a NULL *modname. Paper bag over the problem for the time being. Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Grant Grundler 提交于
Kyle, This patch removes remnants of softirq support that we no longer need. I suspect this was just overlooked when willy convert parisc to generic IRQ support. Tested on c3600 32-bit UP. Signed-off-by: NGrant Grundler <grundler@parisc-linux.org> [and tested on a c8000 64-bit SMP --kyle] Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
WARNING: arch/parisc/kernel/built-in.o(.text.__cpu_up+0x20): Section mismatch: reference to .init.text:smp_boot_one_cpu (after '__cpu_up') Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 28 5月, 2007 2 次提交
-
-
由 Helge Deller 提交于
Wire up utimensat/signalfd/timerfd/eventfd syscalls and mark select/fadvise64/utimes to be ignored by checksyscalls.sh Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Helge Deller 提交于
Hi Kyle, this patch fixes two section mismatches in arch/parisc/kernel: WARNING: arch/parisc/kernel/built-in.o(.data.read_mostly+0xd8): Section mismatch: reference to .init.text:processor_probe (between 'cpu_driver' and 'boot_cpu_data') WARNING: arch/parisc/kernel/built-in.o(.text.alloc_pa_dev+0x140): Section mismatch: reference to .init.text:parisc_hardware_description (after 'alloc_pa_dev') Additionally, mark some tables as constants. Please apply, Helge Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 23 5月, 2007 9 次提交
-
-
由 Milind Arun Choudhary 提交于
ROUND_UP macro cleanup, use ALIGN where ever appropriate Signed-off-by: NMilind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Simon Arlott 提交于
Spelling fixes in arch/parisc/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Acked-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Aurelien Jarno 提交于
The LWS debugging code on parisc is wrongly enabled due to a bug in the use of the preprocessor directives. This debugging code is not thread safe and causes problems with a recent glibc on SMP kernels. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Alexey Dobriyan 提交于
As side effect, remove one more ->get_info user and a novel approach of content generation: sprintf(buf, "%sfoo", buf, ...); sprintf(buf, "%sbar", buf, ...); ... Compile-tested. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Definitely unimplemented at this point and will just trap to sys_ni_syscall... Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Kyle McMartin 提交于
Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Alexandr Andreev 提交于
Add VERIFY_WRITE check in the beginning like compat_sys_getdents() EFAULT on parisc if put_user() fails. Signed-off-by: NAlexandr Andreev <aandreev@openvz.org> Signed-off-by: NAlexey Dobriyan <adobriyan@openvz.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Matthew Wilcox <willy@debian.org> Cc: Grant Grundler <grundler@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 5月, 2007 2 次提交
-
-
由 Sam Ravnborg 提交于
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
由 Sam Ravnborg 提交于
Move definition of .text section to asm-generic. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-