- 27 4月, 2012 9 次提交
-
-
由 Allan Stephens 提交于
Adds check to ensure TIPC sockets reject incoming payload messages that have an unrecognized message type. Remove the old open question about whether TIPC_ERR_NO_PORT is the proper return value. It is appropriate here since there are valid instances where another node can make use of the reply, and at this point in time the host is already broadcasting TIPC data, so there are no real security concerns. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Consolidates validation of scope and name sequence range values into a single routine where it applies both to local name publications and to name publications issued by other nodes in the network. This change means that the scope value for non-local publications is now validated and the name sequence range for local publications is now validated only once. Additionally, a publication attempt that fails validation now creates an entry in the system log file only if debugging capabilities have been enabled; this prevents the system log from being cluttered up with messages caused by a defective application or network node. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Replaces two identical chunks of code that delete an unused name sequence structure from TIPC's name table with calls to a new routine that performs this operation. This change is cosmetic and doesn't impact the operation of TIPC. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Eliminate code to zero-out the main topology service structure, which is already zeroed-out. Get rid of a comment documenting a field of the main topology service structure that no longer exists. Both are cosmetic changes with no impact on runtime behaviour. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Initialization now occurs in the calling thread of control, rather than being deferred to the TIPC tasklet. With the current codebase, the deferral is no longer necessary. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Streamlines the job of re-initializing TIPC's network topology service when a node's network address is first assigned. Rather than destroying the topology server port and breaking its connections to existing subscribers, TIPC now simply lets the service continue running (since the change to the port identifier of each port used by the topology service no longer impacts the flow of messages between the service and its subscribers). This enhancement means that applications that utilize the topology service prior to the assignment of TIPC's network address no longer need to re-establish their subscriptions when the address is finally assigned. However, it is worth noting that any subsequent events for existing subscriptions report the new port identifier of the publishing port, rather than the original port identifier. (For example, a name that was previously reported as being published by <0.0.0:ref> may be subsequently withdrawn by <Z.C.N:ref>.) This doesn't impact any of the existing known userspace in tipc-utils, since (a) TIPC continues to treat references to the original port ID correctly and (b) normal use cases assign an address before active use. However if there does happen to be some rare/custom application out there that was relying on this, they can simply bypass the enhancement by issuing a subscription to {0,0} and break its connection to the topology service, if an associated withdrawal event occurs. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Termination no longer tests to see if the configuration service port was successfully created or not. In the unlikely event that the port was not created, attempting to delete the non-existent port is detected gracefully and causes no harm. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Initialization now occurs in the calling thread of control, rather than being deferred to the TIPC tasklet. With the current codebase, the deferral is no longer necessary. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
由 Allan Stephens 提交于
Streamlines the job of re-initializing TIPC's configuration service when a node's network address is first assigned. Rather than destroying the configuration server port and then recreating it, TIPC now simply withdraws the existing {0,<0.0.0>} name publication and creates a new {0,<Z.C.N>} name publication that identifies the node's network address to interested subscribers. Signed-off-by: NAllan Stephens <allan.stephens@windriver.com> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
-
- 26 4月, 2012 7 次提交
-
-
由 Karsten Keil 提交于
dsp_spl_jiffies need to be the same datatype as jiffies (which is ulong). If not, on 64 bit systems it will fallback to schedule the DSP every jiffie tic as soon jiffies become > 2^32. Signed-off-by: NKarsten Keil <kkeil@linux-pingi.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Karsten Keil 提交于
If DTMF debug is set and tresh goes under 100, the printk will cause a division by zero. Signed-off-by: NKarsten Keil <kkeil@linux-pingi.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
In some cases the hardware bridging/conference (2-n parties) was selected, but still pure software bridging/conference was used. Signed-off-by: NAndreas Eversberg <jolly@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Eversberg 提交于
Fix a bug (was introduced by a cut & paste error) in cases when dsp->conf was NULL. Signed-off-by: NAndreas Eversberg <jolly@eversberg.eu> Signed-off-by: NKarsten Keil <keil@b1-systems.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shan Wei 提交于
read only, so change it to const. Signed-off-by: NShan Wei <davidshan@tencent.com> Acked-by: NPavel Emelyanov <xemul@parallels.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Some kfree_skb() calls should be replaced by consume_skb() to avoid drop_monitor/dropwatch false positives. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Fastabend 提交于
This adds code to trigger CEE events when an APP change or setall command is made from user space. This simplifies user space code significantly by creating a single interface to listen on that works with both firmware and userland agents. And if we end up with multiple agents this keeps every thing in sync userland agents, firmware agents, and kernel notifier consumers. For an example agent that listens for these events see: https://github.com/jrfastab/cgdcbxd cgdcbxd is a daemon used to monitor DCB netlink events and manage the net_prio control group sub-system. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NShmulik Ravid <shmulikr@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 4月, 2012 24 次提交
-
-
由 Paul Gortmaker 提交于
Untie gcc's hands and let it do what it wants within the individual source files. There are two files, node.c and port.c -- only the latter effectively changes (gcc-4.5.2). Objdump shows gcc deciding to not inline port_peernode(). Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Need to consume_skb() instead of kfree_skb() in netlink_dump() and netlink_unicast_kernel() to avoid false dropwatch positives. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
netlink_destroy_callback() move to avoid forward reference CodingStyle cleanups Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This clarifies code intention, as suggested by David. Suggested-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 David S. Miller 提交于
Fix merge between commit 3adadc08 ("net ax25: Reorder ax25_exit to remove races") and commit 0ca7a4c8 ("net ax25: Simplify and cleanup the ax25 sysctl handling") The former moved around the sysctl register/unregister calls, the later simply removed them. With help from Stephen Rothwell. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Commit 35f3d14d (pipe: add support for shrinking and growing pipes) added a slowdown for splice(socket -> pipe), as we might grow the spd used in skb_splice_bits() for each skb we process in splice() syscall. Its not needed since skb lengths are capped. The default on-stack arrays are more than enough. Use MAX_SKB_FRAGS instead of PIPE_DEF_BUFFERS to describe the reasonable limit per skb. Add coalescing support to help splicing of GRO skbs built from linear skbs (linked into frag_list) Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Tom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull build system failure fix from Michal Marek: "This fixes build failure with newer gcc that adds some internal symbols that end in "__mod_*_device_table", but are not actually the tables themselves." * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Fix modpost failures in fedora 17
-
由 Eric Dumazet 提交于
commit c8628155 (tcp: reduce out_of_order memory use) took care of coalescing tcp segments provided by legacy devices (linear skbs) We extend this idea to fragged skbs, as their truesize can be heavy. ixgbe for example uses 256+1024+PAGE_SIZE/2 = 3328 bytes per segment. Use this coalescing strategy for receive queue too. This contributes to reduce number of tcp collapses, at minimal cost, and reduces memory overhead and packets drops. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: NNeal Cardwell <ncardwell@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Barak Witkowski 提交于
Signed-off-by: NBarak Witkowski <barak@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Kravkov 提交于
Removes GRO workaround, as issue is fixed in FW 7.2.51. Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com> Signed-off-by: NBarak Witkowski <barak@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Barak Witkowski 提交于
Following patch adds afex multifunction support to the driver (afex multifunction is based on vntag header) and updates FW version used to 7.2.51. Support includes the following: 1. Configure vif parameters in firmware (default vlan, vif id, default priority, allowed priorities) according to values received from NIC. 2. Configure FW to strip/add default vlan according to afex vlan mode. 3. Notify link up to OS only after vif is fully initialized. 4. Support vif list set/get requests and configure FW accordingly. 5. Supply afex statistics upon request from NIC. 6. Special handling to L2 interface in case of FCoE vif. Signed-off-by: NBarak Witkowski <barak@broadcom.com> Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Moving to interrupts instead of polling fpr TX completions Avoiding situations where skb can be held in by the driver for a long time (till timer expires). The change is also necessary for supporting BQL. Removing comp_lock that was required because we could handle TX completions from several contexts: Interrupts, timer, polling. Now there is only interrupts Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yevgeny Petrilin 提交于
Signed-off-by: NYevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While investigating TCP performance problems on 10Gb+ links, we found a tcp sender was dropping lot of incoming ACKS because of sk_rcvbuf limit in sk_add_backlog(), especially if receiver doesnt use GRO/LRO and sends one ACK every two MSS segments. A sender usually tweaks sk_sndbuf, but sk_rcvbuf stays at its default value (87380), allowing a too small backlog. A TCP ACK, even being small, can consume nearly same truesize space than outgoing packets. Using sk_rcvbuf + sk_sndbuf as a limit makes sense and is fast to compute. Performance results on netperf, single flow, receiver with disabled GRO/LRO : 7500 Mbits instead of 6050 Mbits, no more TCPBacklogDrop increments at sender. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Rick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
sk_add_backlog() & sk_rcvqueues_full() hard coded sk_rcvbuf as the memory limit. We need to make this limit a parameter for TCP use. No functional change expected in this patch, all callers still using the old sk_rcvbuf limit. Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Maciej Żenczykowski <maze@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Cc: Rick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Randy Dunlap <rdunlap@xenotime.net> reported: > On 04/23/2012 12:07 AM, Stephen Rothwell wrote: > >> Hi all, >> >> Changes since 20120420: > > > include/net/ax25.h:447:75: error: expected ';' before '}' token > > static inline int ax25_register_dev_sysctl(ax25_dev *ax25_dev) { return 0 }; > static inline void ax25_unregister_dev_sysctl(ax25_dev *ax25_dev) {}; > > First function: move ';' inside braces. > Second function: drop the ';'. Put the semicolons where it makes sense. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Acked-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://neil.brown.name/md由 Linus Torvalds 提交于
Pull a few more md bug fixes from NeilBrown: "2 are tagged for -stable, one being for a fairly serious bug that can corrupt metadata and make it hard to recovery an array. The other is for a more recent regression since 3.3" * tag 'md-3.4-fixes' of git://neil.brown.name/md: md: fix possible corruption of array metadata on shutdown. md: don't call ->add_disk unless there is good reason. DM RAID: Use safe version of rdev_for_each
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm由 Linus Torvalds 提交于
Pull dlm fixes from David Teigland: "This includes one short patch fixing the behavior of the QUECVT flag, which the gfs2 folks are waiting on." * tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: fix QUECVT when convert queue is empty
-
由 Hugh Dickins 提交于
Mel reports a BUG_ON(slot == NULL) in radix_tree_tag_set() on s390 3.0.13: called from __set_page_dirty_nobuffers() when page_remove_rmap() tries to transfer dirty flag from s390 storage key to struct page and radix_tree. That would be because of reclaim's shrink_page_list() calling add_to_swap() on this page at the same time: first PageSwapCache is set (causing page_mapping(page) to appear as &swapper_space), then page->private set, then tree_lock taken, then page inserted into radix_tree - so there's an interval before taking the lock when the radix_tree slot is empty. We could fix this by moving __add_to_swap_cache()'s spin_lock_irq up before the SetPageSwapCache. But a better fix is simply to do what's five years overdue: Ken Chen introduced __set_page_dirty_no_writeback() (if !PageDirty TestSetPageDirty) for tmpfs to skip all the radix_tree overhead, and swap is just the same - it ignores the radix_tree tag, and does not participate in dirty page accounting, so should be using __set_page_dirty_no_writeback() too. s390 testing now confirms that this does indeed fix the problem. Reported-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NHugh Dickins <hughd@google.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Ken Chen <kenchen@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
commit c744a65c md: don't set md arrays to readonly on shutdown. removed the possibility of a 'BUG' when data is written to an array that has just been switched to read-only, but also introduced the possibility that the array metadata could be corrupted. If, when md_notify_reboot gets the mddev lock, the array is in a state where it is assembled but hasn't been started (as can happen if the personality module is not available, or in other unusual situations), then incorrect metadata will be written out making it impossible to re-assemble the array. So only call __md_stop_writes() if the array has actually been activated. This patch is needed for any stable kernel which has had the above commit applied. Cc: stable@vger.kernel.org Reported-by: NChristoph Nelles <evilazrael@evilazrael.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-