As Maxim Patlasov pointed out, it's possible to get a dirty page while it's
copy is still under writeback, despite fuse_page_mkwrite() doing its thing
(direct IO).

This could result in two concurrent write request for the same offset, with
data corruption if they get mixed up.

To prevent this, fuse needs to check and delay such writes.  This
implementation does this by:

 1. check if page is still under writeout, if so create a new, single page
    secondary request for it

 2. chain this secondary request onto the in-flight request

 2/a. if a seconday request for the same offset was already chained to the
    in-flight request, then just copy the contents of the page and discard
    the new secondary request.  This makes sure that for each page will
    have at most two requests associated with it

 3. when the in-flight request finished, send off all secondary requests
    chained onto it
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Doing dput(parent) is not valid in RCU walk mode.  In RCU mode it would
probably be okay to update the parent flags, but it's actually not
necessary most of the time...

So only set the FUSE_I_ADVISE_RDPLUS flag on the parent when the entry was
recently initialized by READDIRPLUS.

This is achieved by setting FUSE_I_INIT_RDPLUS on entries added by
READDIRPLUS and only dropping out of RCU mode if this flag is set.
FUSE_I_INIT_RDPLUS is cleared once the FUSE_I_ADVISE_RDPLUS flag is set in
the parent.
Reported-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org

The way how fuse calls truncate_pagecache() from fuse_change_attributes()
is completely wrong. Because, w/o i_mutex held, we never sure whether
'oldsize' and 'attr->size' are valid by the time of execution of
truncate_pagecache(inode, oldsize, attr->size). In fact, as soon as we
released fc->lock in the middle of fuse_change_attributes(), we completely
loose control of actions which may happen with given inode until we reach
truncate_pagecache. The list of potentially dangerous actions includes
mmap-ed reads and writes, ftruncate(2) and write(2) extending file size.

The typical outcome of doing truncate_pagecache() with outdated arguments
is data corruption from user point of view. This is (in some sense)
acceptable in cases when the issue is triggered by a change of the file on
the server (i.e. externally wrt fuse operation), but it is absolutely
intolerable in scenarios when a single fuse client modifies a file without
any external intervention. A real life case I discovered by fsx-linux
looked like this:

1. Shrinking ftruncate(2) comes to fuse_do_setattr(). The latter sends
FUSE_SETATTR to the server synchronously, but before getting fc->lock ...
2. fuse_dentry_revalidate() is asynchronously called. It sends FUSE_LOOKUP
to the server synchronously, then calls fuse_change_attributes(). The
latter updates i_size, releases fc->lock, but before comparing oldsize vs
attr->size..
3. fuse_do_setattr() from the first step proceeds by acquiring fc->lock and
updating attributes and i_size, but now oldsize is equal to
outarg.attr.size because i_size has just been updated (step 2). Hence,
fuse_do_setattr() returns w/o calling truncate_pagecache().
4. As soon as ftruncate(2) completes, the user extends file size by
write(2) making a hole in the middle of file, then reads data from the hole
either by read(2) or mmap-ed read. The user expects to get zero data from
the hole, but gets stale data because truncate_pagecache() is not executed
yet.

The scenario above illustrates one side of the problem: not truncating the
page cache even though we should. Another side corresponds to truncating
page cache too late, when the state of inode changed significantly.
Theoretically, the following is possible:

1. As in the previous scenario fuse_dentry_revalidate() discovered that
i_size changed (due to our own fuse_do_setattr()) and is going to call
truncate_pagecache() for some 'new_size' it believes valid right now. But
by the time that particular truncate_pagecache() is called ...
2. fuse_do_setattr() returns (either having called truncate_pagecache() or
not -- it doesn't matter).
3. The file is extended either by write(2) or ftruncate(2) or fallocate(2).
4. mmap-ed write makes a page in the extended region dirty.

The result will be the lost of data user wrote on the fourth step.

The patch is a hotfix resolving the issue in a simplistic way: let's skip
dangerous i_size update and truncate_pagecache if an operation changing
file size is in progress. This simplistic approach looks correct for the
cases w/o external changes. And to handle them properly, more sophisticated
and intrusive techniques (e.g. NFS-like one) would be required. I'd like to
postpone it until the issue is well discussed on the mailing list(s).

Changed in v2:
 - improved patch description to cover both sides of the issue.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Cc: stable@vger.kernel.org

Without async DIO write requests to a single file were always serialized.
With async DIO that's no longer the case.

So don't turn on async DIO by default for fear of breaking backward
compatibility.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The patch improves error handling in fuse_direct_IO(): if we successfully
submitted several fuse requests on behalf of synchronous direct write
extending file and some of them failed, let's try to do our best to clean-up.

Changed in v2: reuse fuse_do_setattr(). Thanks to Brian for suggestion.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The patch implements passing "struct fuse_io_priv *io" down the stack up to
fuse_send_read/write where it is used to submit request asynchronously.
io->async==0 designates synchronous processing.

Non-trivial part of the patch is changes in fuse_direct_io(): resources
like fuse requests and user pages cannot be released immediately in async
case.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The patch implements a framework to process an IO request asynchronously. The
idea is to associate several fuse requests with a single kiocb by means of
fuse_io_priv structure. The structure plays the same role for FUSE as 'struct
dio' for direct-io.c.

The framework is supposed to be used like this:
 - someone (who wants to process an IO asynchronously) allocates fuse_io_priv
   and initializes it setting 'async' field to non-zero value.
 - as soon as fuse request is filled, it can be submitted (in non-blocking way)
   by fuse_async_req_send()
 - when all submitted requests are ACKed by userspace, io->reqs drops to zero
   triggering aio_complete()

In case of IO initiated by libaio, aio_complete() will finish processing the
same way as in case of dio_complete() calling aio_complete(). But the
framework may be also used for internal FUSE use when initial IO request
was synchronous (from user perspective), but it's beneficial to process it
asynchronously. Then the caller should wait on kiocb explicitly and
aio_complete() will wake the caller up.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Existing flag fc->blocked is used to suspend request allocation both in case
of many background request submitted and period of time before init_reply
arrives from userspace. Next patch will skip blocking allocations of
synchronous request (disregarding fc->blocked). This is mostly OK, but
we still need to suspend allocations if init_reply is not arrived yet. The
patch introduces flag fc->initialized which will serve this purpose.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

There are two types of processing requests in FUSE: synchronous (via
fuse_request_send()) and asynchronous (via adding to fc->bg_queue).

Fortunately, the type of processing is always known in advance, at the time
of request allocation. This preparatory patch utilizes this fact making
fuse_get_req() aware about the type. Next patches will use it.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

For some filesystems (e.g. GlusterFS), the cost of performing a
normal readdir and readdirplus are identical.  Since adaptively
using readdirplus has no benefit for those systems, give
users/filesystems the option to control adaptive readdirplus use.

v2 of this patch incorporates Miklos's suggestion to simplify the code,
as well as improving consistency of macro names and documentation.
Signed-off-by: NEric Wong <normalperson@yhbt.net>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Use the same adaptive readdirplus mechanism as NFS:

http://permalink.gmane.org/gmane.linux.nfs/49299

If the user space implementation wants to disable readdirplus
temporarily, it could just return ENOTSUPP. Then kernel will
recall it with readdir.
Signed-off-by: NFeng Shuo <steve.shuo.feng@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Commit c69e8d9c added rcu lock to fuse/dir.c It was assuming
that 'task' is some other process but in fact this parameter always
equals to 'current'. Inline this parameter to make it more readable
and remove RCU lock as it is not needed when access current process
credentials.
Signed-off-by: NAnatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Fix the following sparse warnings:

fs/fuse/file.c:1216:43: warning: cast removes address space of expression
fs/fuse/file.c:1216:43: warning: incorrect type in initializer (different address spaces)
fs/fuse/file.c:1216:43:    expected void [noderef] <asn:1>*iov_base
fs/fuse/file.c:1216:43:    got void *<noident>
fs/fuse/file.c:1241:43: warning: cast removes address space of expression
fs/fuse/file.c:1241:43: warning: incorrect type in initializer (different address spaces)
fs/fuse/file.c:1241:43:    expected void [noderef] <asn:1>*iov_base
fs/fuse/file.c:1241:43:    got void *<noident>
fs/fuse/file.c:1267:43: warning: cast removes address space of expression
fs/fuse/file.c:1267:43: warning: incorrect type in initializer (different address spaces)
fs/fuse/file.c:1267:43:    expected void [noderef] <asn:1>*iov_base
fs/fuse/file.c:1267:43:    got void *<noident>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The ability to save page pointers along with lengths and offsets in fuse_req
will be useful to cover several iovec-s with a single fuse_req.

Per-request page_offset is removed because anybody who need it can use
req->page_descs[0].offset instead.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The patch categorizes all fuse_get_req() invocations into two categories:
 - fuse_get_req_nopages(fc) - when caller doesn't care about req->pages
 - fuse_get_req(fc, n) - when caller need n page pointers (n > 0)

Adding fuse_get_req_nopages() helps to avoid numerous fuse_get_req(fc, 0)
scattered over code. Now it's clear from the first glance when a caller need
fuse_req with page pointers.

The patch doesn't make any logic changes. In multi-page case, it silly
allocates array of FUSE_MAX_PAGES_PER_REQ page pointers. This will be amended
by future patches.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The patch removes inline array of FUSE_MAX_PAGES_PER_REQ page pointers from
fuse_req. Instead of that, req->pages may now point either to small inline
array or to an array allocated dynamically.

This essentially means that all callers of fuse_request_alloc[_nofs] should
pass the number of pages needed explicitly.

The patch doesn't make any logic changes.
Signed-off-by: NMaxim Patlasov <mpatlasov@parallels.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

This patch implements readdirplus support in FUSE, similar to NFS.
The payload returned in the readdirplus call contains
'fuse_entry_out' structure thereby providing all the necessary inputs
for 'faking' a lookup() operation on the spot.

If the dentry and inode already existed (for e.g. in a re-run of ls -l)
then just the inode attributes timeout and dentry timeout are refreshed.

With a simple client->network->server implementation of a FUSE based
filesystem, the following performance observations were made:

Test: Performing a filesystem crawl over 20,000 files with

sh# time ls -lR /mnt

Without readdirplus:
Run 1: 18.1s
Run 2: 16.0s
Run 3: 16.2s

With readdirplus:
Run 1: 4.1s
Run 2: 3.8s
Run 3: 3.8s

The performance improvement is significant as it avoided 20,000 upcalls
calls (lookup). Cache consistency is no worse than what already is.
Signed-off-by: NAnand V. Avati <avati@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Use kuid_t and kgid_t in struct fuse_conn and struct fuse_mount_data.

The connection between between a fuse filesystem and a fuse daemon is
established when a fuse filesystem is mounted and provided with a file
descriptor the fuse daemon created by opening /dev/fuse.

For now restrict the communication of uids and gids between the fuse
filesystem and the fuse daemon to the initial user namespace.  Enforce
this by verifying the file descriptor passed to the mount of fuse was
opened in the initial user namespace.  Ensuring the mount happens in
the initial user namespace is not necessary as mounts from non-initial
user namespaces are not yet allowed.

In fuse_req_init_context convert the currrent fsuid and fsgid into the
initial user namespace for the request that will be sent to the fuse
daemon.

In fuse_fill_attr convert the uid and gid passed from the fuse daemon
from the initial user namespace into kuids and kgids.

In iattr_to_fattr called from fuse_setattr convert kuids and kgids
into the uids and gids in the initial user namespace before passing
them to the fuse filesystem.

In fuse_change_attributes_common called from fuse_dentry_revalidate,
fuse_permission, fuse_geattr, and fuse_setattr, and fuse_iget convert
the uid and gid from the fuse daemon into a kuid and a kgid to store
on the fuse inode.

By default fuse mounts are restricted to task whose uid, suid, and
euid matches the fuse user_id and whose gid, sgid, and egid matches
the fuse group id.  Convert the user_id and group_id mount options
into kuids and kgids at mount time, and use uid_eq and gid_eq to
compare the in fuse_allow_task.

Cc: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: NEric W. Biederman <ebiederm@xmission.com>

FUSE_AUTO_INVAL_DATA is provided to enable updated/auto cache
invalidation logic.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Now we store attr->ino at inode->i_ino, return attr->ino at the
first time and then return inode->i_ino if the attribute timeout
isn't expired. That's wrong on 32 bit platforms because attr->ino
is 64 bit and inode->i_ino is 32 bit in this case.

Fix this by saving 64 bit ino in fuse_inode structure and returning
it every time we call getattr. Also squash attr->ino into inode->i_ino
explicitly.
Signed-off-by: NPavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

If userspace filesystem doesn't support fallocate, remember this and don't send
request next time.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Allows a FUSE file-system to tell the kernel when a file or directory is
deleted. If the specified dentry has the specified inode number, the kernel will
unhash it.

The current 'fuse_notify_inval_entry' does not cause the kernel to clean up
directories that are in use properly, and as a result the users of those
directories see incorrect semantics from the file-system. The error condition
seen when 'fuse_notify_inval_entry' is used to notify of a deleted directory is
avoided when 'fuse_notify_delete' is used instead.

The following scenario demonstrates the difference:
1. User A chdirs into 'testdir' and starts reading 'testfile'.
2. User B rm -rf 'testdir'.
3. User B creates 'testdir'.
4. User C chdirs into 'testdir'.

If you run the above within the same machine on any file-system (including fuse
file-systems), there is no problem: user C is able to chdir into the new
testdir. The old testdir is removed from the dentry tree, but still open by user
A.

If operations 2 and 3 are performed via the network such that the fuse
file-system uses one of the notify functions to tell the kernel that the nodes
are gone, then the following error occurs for user C while user A holds the
original directory open:

muirj@empacher:~> ls /test/testdir
ls: cannot access /test/testdir: No such file or directory

The issue here is that the kernel still has a dentry for testdir, and so it is
requesting the attributes for the old directory, while the file-system is
responding that the directory no longer exists.

If on the other hand, if the file-system can notify the kernel that the
directory is deleted using the new 'fuse_notify_delete' function, then the above
ls will find the new directory as expected.
Signed-off-by: NJohn Muir <john@jmuir.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Multiplexing filesystems may want to support ioctls on the underlying
files and directores (e.g. FS_IOC_{GET,SET}FLAGS).

Ioctl support on directories was missing so add it now.
Reported-by: NAntonio SJ Musumeci <bile@landofbile.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Commit a9ff4f87 "fuse: support BSD locking semantics" overlooked a
number of issues with supporing flock locks over existing POSIX
locking infrastructure:

  - it's not backward compatible, passing flock(2) calls to userspace
    unconditionally (if userspace sets FUSE_POSIX_LOCKS)

  - it doesn't cater for the fact that flock locks are automatically
    unlocked on file release

  - it doesn't take into account the fact that flock exclusive locks
    (write locks) don't need an fd opened for write.

The last one invalidates the original premise of the patch that flock
locks can be emulated with POSIX locks.

This patch fixes the first two issues.  The last one needs to be fixed
in userspace if the filesystem assumed that a write lock will happen
only on a file operned for write (as in the case of the current fuse
library).
Reported-by: NSebastian Pipping <webmaster@hartwork.org>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers.  Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2.  For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Reduce the size of struct fuse_request by removing cuse_init_out from
the request structure and allocating it dinamically instead.

CC: Tejun Heo <tj@kernel.org>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Single threaded NTFS-3G could get stuck if a delayed RELEASE reply
triggered a DESTROY request via path_put().

Fix this by

 a) making RELEASE requests synchronous, whenever possible, on fuseblk
 filesystems

 b) if not possible (triggered by an asynchronous read/write) then do
 the path_put() in a separate thread with schedule_work().
Reported-by: NOliver Neukum <oneukum@suse.de>
Cc: stable@kernel.org
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Terje Malmedal reports that a fuse filesystem with 32 million inodes
on a machine with lots of memory can take up to 30 minutes to process
FORGET requests when all those inodes are evicted from the icache.

To solve this, create a BATCH_FORGET request that allows up to about
8000 FORGET requests to be sent in a single message.

This request is only sent if userspace supports interface version 7.16
or later, otherwise fall back to sending individual FORGET messages.
Reported-by: NTerje Malmedal <terje.malmedal@usit.uio.no>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Terje Malmedal reports that a fuse filesystem with 32 million inodes
on a machine with lots of memory can go unresponsive for up to 30
minutes when all those inodes are evicted from the icache.

The reason is that FORGET messages, sent when the inode is evicted,
are queued up together with regular filesystem requests, and while the
huge queue of FORGET messages are processed no other filesystem
operation can proceed.

Since a full fuse request structure is allocated for each inode, these
take up quite a bit of memory as well.

To solve these issues, create a slim 'fuse_forget_link' structure
containing just the minimum of information required to send the FORGET
request and chain these on a separate queue.

When userspace is asking for a request make sure that FORGET and
non-FORGET requests are selected fairly: for each 8 non-FORGET allow
16 FORGET requests.  This will make sure FORGETs do not pile up, yet
other requests are also allowed to proceed while the queued FORGETs
are processed.
Reported-by: NTerje Malmedal <terje.malmedal@usit.uio.no>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Userspace filesystem can request data to be retrieved from the inode's
mapping.  This request is synchronous and the retrieved data is queued
as a new request.  If the write to the fuse device returns an error
then the retrieve request was not completed and a reply will not be
sent.

Only present pages are returned in the retrieve reply.  Retrieving
stops when it finds a non-present page and only data prior to that is
returned.

This request doesn't change the dirty state of pages.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Userspace filesystem can request data to be stored in the inode's
mapping.  This request is synchronous and has no reply.  If the write
to the fuse device returns an error then the store request was not
fully completed (but may have updated some pages).

If the stored data overflows the current file size, then the size is
extended, similarly to a write(2) on the filesystem.

Pages which have been completely stored are marked uptodate.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

When splicing buffers to the fuse device with SPLICE_F_MOVE, try to
move pages from the pipe buffer into the page cache.  This allows
populating the fuse filesystem's cache without ever touching the page
contents, i.e. zero copy read capability.

The following steps are performed when trying to move a page into the
page cache:

 - buf->ops->confirm() to make sure the new page is uptodate
 - buf->ops->steal() to try to remove the new page from it's previous place
 - remove_from_page_cache() on the old page
 - add_to_page_cache_locked() on the new page

If any of the above steps fail (non fatally) then the code falls back
to copying the page.  In particular ->steal() will fail if there are
external references (other than the page cache and the pipe buffer) to
the page.

Also since the remove_from_page_cache() + add_to_page_cache_locked()
are non-atomic it is possible that the page cache is repopulated in
between the two and add_to_page_cache_locked() will fail.  This could
be fixed by creating a new atomic replace_page_cache_page() function.

fuse_readpages_end() needed to be reworked so it works even if
page->mapping is NULL for some or all pages which can happen if the
add_to_page_cache_locked() failed.

A number of sanity checks were added to make sure the stolen pages
don't have weird flags set, etc...  These could be moved into generic
splice/steal code.
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Update some fs code to make use of new helper functions introduced
in the previous patch. Should be no significant change in behaviour
(except CIFS now calls send_sig under i_lock, via inode_newsize_ok).
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMiklos Szeredi <miklos@szeredi.hu>
Cc: linux-nfs@vger.kernel.org
Cc: Trond.Myklebust@netapp.com
Cc: linux-cifs-client@lists.samba.org
Cc: sfrench@samba.org
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Make the max_background and congestion_threshold parameters of a FUSE
mount tunable at runtime by adding the respective knobs to its directory
within the fusectl filesystem.
Signed-off-by: NCsaba Henk <csaba@gluster.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

The practical values for these limits depend on the design of the
filesystem server so let userspace set them at initialization time.
Signed-off-by: NCsaba Henk <csaba@gluster.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Add notification messages that allow the filesystem to invalidate VFS
caches.

Two notifications are added:

 1) inode invalidation

   - invalidate cached attributes
   - invalidate a range of pages in the page cache (this is optional)

 2) dentry invalidation

   - try to invalidate a subtree in the dentry cache

Care must be taken while accessing the 'struct super_block' for the
mount, as it can go away while an invalidation is in progress.  To
prevent this, introduce a rw-semaphore, that is taken for read during
the invalidation and taken for write in the ->kill_sb callback.

Cc: Csaba Henk <csaba@gluster.com>
Cc: Anand Avati <avati@zresearch.com>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

This patch lets filesystems handle masking the file mode on creation.
This is needed if filesystem is using ACLs.

 - The CREATE, MKDIR and MKNOD requests are extended with a "umask"
   parameter.

 - A new FUSE_DONT_MASK flag is added to the INIT request/reply.  With
   this the filesystem may request that the create mode is not masked.

CC: Jean-Pierre André <jean-pierre.andre@wanadoo.fr>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Export the following symbols for CUSE.

fuse_conn_put()
fuse_conn_get()
fuse_conn_kill()
fuse_send_init()
fuse_do_open()
fuse_sync_release()
fuse_direct_io()
fuse_do_ioctl()
fuse_file_poll()
fuse_request_alloc()
fuse_get_req()
fuse_put_request()
fuse_request_send()
fuse_abort_conn()
fuse_dev_release()
fuse_dev_operations
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>