- 29 1月, 2009 40 次提交
-
-
由 Ingo Molnar 提交于
- spread out the mps_oem_check() namespace on a per APIC driver basis Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Call all the registered MPS quirk handlers early. These methods scan low RAM typically for specific signatures so are safe to be called early. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup - allow NULL ->mps_oem_check() entries - clean up the code flow Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Refactor the ->phys_pkg_id() methods: - namespace separation - macro wrapper removal - open-coded calls to the methods in the generic code Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- unify the call signature of 64-bit to that of 32-bit - clean up the types all around - clean up namespace contamination Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- eliminate the needless es7000_enable_apic_mode() complication which was not apparent prior the namespace cleanups - clean up the control flow in es7000_enable_apic_mode() - other cleanups Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Only ES7000 has a real ->enable_apic_mode() method, the other subarchitectures define it but keep it empty. So mark the vector as NULL, extend the generic code to handle NULL -setup_portio_remap() entries and remove all the empty handlers. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- spread out the namespace to per driver methods - extend it to 64-bit as well so that we can use apic->check_phys_apicid_present() unconditionally Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Only NUMAQ has a real ->setup_portio_remap() method, the other subarchitectures define it but keep it empty. So mark the vector as NULL, extend the generic code to handle NULL -setup_portio_remap() entries and remove all the empty handlers. Also move the NUMAQ method from the header file into the apic driver .c file. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
only NUMAQ uses this quirk: to prevent the timer IRQ from being added on secondary nodes. All other genapic templates can have a NULL ->multi_timer_check() callback. Also, extend the generic code to treat a NULL pointer accordingly. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros - remove namespace clash on 64-bit Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
- separate the namespace - remove macros - move the default vector-allocation-domain to mach-generic - fix whitespace damage Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
These flags are completely unused. (the in-kernel IRQ balancer has been removed from the upstream kernel.) Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Clean up these methods - to make it clearer which function is used in which case. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
This field name was unreasonably long - shorten it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup The bigsmp and es7000 subarchitectures un-defined APIC_DEST_LOGICAL in a rather nasty way by re-defining it to zero. That is infinitely fragile and makes it very hard to see what to code really does in a given context. The very same constant has different meanings and values - depending on which subarch is enabled. Untangle this mess by never undefining the constant, but instead propagating the right values into the genapic driver templates. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
the ->ESR_DISABLE shouting variant was used to enable the esr_disable macro wrappers. Those ugly macros are removed now so we can rename ->ESR_DISABLE to ->disable_esr Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup Most subarchitectures want to disable the APIC ESR (Error Status Register), because they generally have hardware hacks that wrap standard CPUs into a bigger system and hence the APIC bus is quite non-standard and weirdnesses (lockups) have been seen with ESR reporting. Remove the esr_disable macros and put the desired flag into each subarchitecture's genapic template directly. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup use apic->target_cpus() directly instead of the TARGET_CPUS wrapper. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup Clean up all the target_cpus() namespace overlap that exists between bigsmp, es7000, mach-default, numaq and summit - by separating the different functions into different names. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Remove leftover definition. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup They were only used in a single place and obscured the apic_es7000 driver template. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup They were only used in a single place and obscured the apic_bigsmp driver template. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup They were only used in a single place and obscured the apic_numaq template. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup They were only used in a single place and obscured the apic_summit template. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup They were only used in a single place and obscured the apic_default template. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Remove the wrapper macros IRQ_DEST_MODE and IRQ_DELIVERY_MODE. The typical 32-bit and the 64-bit build all dereference via the genapic, so it's pointless to hide that indirection via these ugly macros. Furthermore, it also obscures subarchitecture details. So replace it with apic->irq_dest_mode / etc. accesses. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
int_delivery_mode is supposed to mean 'interrupt delivery mode', but it's quite a misnomer as 'int' we usually think of as an integer type ... The standard naming for such attributes is 'irq' - so rename the following fields and macros: int_delivery_mode => irq_delivery_mode INT_DELIVERY_MODE => IRQ_DELIVERY_MODE int_dest_mode => irq_dest_mode INT_DEST_MODE => IRQ_DEST_MODE Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: cleanup x86 subarchitectures each defined a "apic_id_registered()" method, which could be an inline function depending on which subarch we build for, and which was also the name of a genapic field. Untangle this namespace spaghetti by giving each of the instances a separate name. Also remove wrapper macro obfuscation. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Impact: refactor code x86 subarchitectures each defined a "acpi_madt_oem_check()" method, which could be an inline function, or an extern, or a static function, and which was also the name of a genapic field. Untangle this namespace spaghetti by setting ->acpi_madt_oem_check() to NULL on those subarchitectures that have no detection quirks, and rename the other ones (summit, es7000) that do. Also change default_acpi_madt_oem_check() to handle NULL entries, and clean its control flow up as well. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
The APIC_INIT() / APICFUNC / IPIFUNC macros were ugly and obfuscated the true identity of various APIC driver methods. Now that they are not used anymore, remove them. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Clean up the APIC driver template: - order fields properly - use the macro names explicitly (so that they can be renamed later) - fill in NULL entries as well Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Clean up the APIC driver template: - order fields properly - use the macro names explicitly (so that they can be renamed later) - fill in NULL entries as well Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Clean up the APIC driver template: - order fields properly - use the macro names explicitly (so that they can be renamed later) - fill in NULL entries as well Signed-off-by: NIngo Molnar <mingo@elte.hu>
-