- 23 6月, 2018 9 次提交
-
-
由 Geert Uytterhoeven 提交于
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Tenart 提交于
This patch fixes a sparse warning about using an incorrect type in argument 2 of ocelot_write_rix(), as an u32 was expected but a __be32 was given. The conversion to u32 is forced, which is safe as the value will be written as-is in the hardware without any modification. Fixes: 08d02364 ("net: mscc: fix the injection header") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Tenart 提交于
When using s/w buffer management, buffers are allocated and DMA mapped. When doing so on an arm64 platform, an offset correction is applied on the DMA address, before storing it in an Rx descriptor. The issue is this DMA address is then used later in the Rx path without removing the offset correction. Thus the DMA address is wrong, which can led to various issues. This patch fixes this by removing the offset correction from the DMA address retrieved from the Rx descriptor before using it in the Rx path. Fixes: 8d5047cf ("net: mvneta: Convert to be 64 bits compatible") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobin C. Harding 提交于
Recent patch updated e1000 docs to rst format. Docs build (`make htmldocs`) is currently failing due to this file with error: (SEVERE/4) Unexpected section title. This is because a section of the file is indented 2 spaces. Build error can be cleared by aligning the text with column 0. While we are changing these lines we can make sure line length does not exceed 72, that newlines following headings are uniform, and that full stops are followed by two spaces. Align text with column 0, limit line length to 72, ensure two spaces follow all full stops, ensure uniform use of newlines after heading. Fixes commit (228046e7 Documentation: e1000: Update kernel documentation) CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NTobin C. Harding <me@tobin.cc> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobin C. Harding 提交于
Recent patch updated e100 docs to rst format. Docs build (`make htmldocs`) is currently failing due to this file with error: (SEVERE/4) Unexpected section title. This is because a section of the file is indented 2 spaces. Build error can be cleared by aligning the text with column 0. While we are changing these lines we can make sure line length does not exceed 72, that newlines following headings are uniform, and that full stops are followed by two spaces. Align text with column 0, limit line length to 72, ensure two spaces follow all full stops, ensure uniform use of newlines after heading. Fixes commit (85d63445 Documentation: e100: Update the Intel 10/100 driver doc) CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NTobin C. Harding <me@tobin.cc> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobin C. Harding 提交于
Recently documentation file was converted to rst. The document title has the incorrect heading adornment. From kernel docs: * Please stick to this order of heading adornments: 1. ``=`` with overline for document title:: ============== Document title ============== Add overline heading adornment to document title. Fixes commit (228046e7 Documentation: e1000: Update kernel documentation) CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NTobin C. Harding <me@tobin.cc> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobin C. Harding 提交于
Recently documentation file was converted to rst. The document title has the incorrect heading adornment. From kernel docs: * Please stick to this order of heading adornments: 1. ``=`` with overline for document title:: ============== Document title ============== Add overline heading adornment to document title. Fixes commit (85d63445 Documentation: e100: Update the Intel 10/100 driver doc) CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NTobin C. Harding <me@tobin.cc> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hangbin Liu 提交于
After recieving MLD querys, we update idev->mc_maxdelay with max_delay from query header. This make the later unsolicited reports have the same interval with mc_maxdelay, which means we may send unsolicited reports with long interval time instead of default configured interval time. Also as we will not call ipv6_mc_reset() after device up. This issue will be there even after leave the group and join other groups. Fixes: fc4eba58 ("ipv6: make unsolicited report intervals configurable for mld") Signed-off-by: NHangbin Liu <liuhangbin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason Wang 提交于
Sock will be NULL if we pass -1 to vhost_net_set_backend(), but when we meet errors during ubuf allocation, the code does not check for NULL before calling sockfd_put(), this will lead NULL dereferencing. Fixing by checking sock pointer before. Fixes: bab632d6 ("vhost: vhost TX zero-copy support") Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 6月, 2018 7 次提交
-
-
由 Claudio Imbrenda 提交于
The dst_cid and src_cid are 64 bits, therefore 64 bit accessors should be used, and in fact in virtio_transport_common.c only 64 bit accessors are used. Using 32 bit accessors for 64 bit values breaks big endian systems. This patch fixes a wrong use of le32_to_cpu in virtio_transport_send_pkt. Fixes: b9116823 ("VSOCK: add loopback to virtio_transport") Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The function cpdma_desc_pool_create is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'cpdma_desc_pool_create' was not declared. Should it be static? Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Ross Lagerwall says: ==================== xen-netfront: Fix issues with commit f599c64f Fix a couple of issues with commit f599c64f ("xen-netfront: Fix race between device setup and open"). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ross Lagerwall 提交于
Update the features after calling register_netdev() otherwise the device features are not set up correctly and it not possible to change the MTU of the device. After this change, the features reported by ethtool match the device's features before the commit which introduced the issue and it is possible to change the device's MTU. Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Reported-by: NLiam Shepherd <liam@dancer.es> Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ross Lagerwall 提交于
Fixes: f599c64f ("xen-netfront: Fix race between device setup and open") Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: NRoss Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paolo Abeni 提交于
If flower filter is created without the skip_sw flag, fl_mask_put() can race with fl_classify() and we can destroy the mask rhashtable while a lookup operation is accessing it. BUG: unable to handle kernel paging request at 00000000000911d1 PGD 0 P4D 0 SMP PTI CPU: 3 PID: 5582 Comm: vhost-5541 Not tainted 4.18.0-rc1.vanilla+ #1950 Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.1.7 06/16/2016 RIP: 0010:rht_bucket_nested+0x20/0x60 Code: 31 c8 c1 c1 18 29 c8 c3 66 90 8b 4f 04 ba 01 00 00 00 8b 07 48 8b bf 80 00 00 0 RSP: 0018:ffffafc5cfbb7a48 EFLAGS: 00010206 RAX: 0000000000001978 RBX: ffff9f12dff88a00 RCX: 00000000ffff9f12 RDX: 00000000000911d1 RSI: 0000000000000148 RDI: 0000000000000001 RBP: ffff9f12dff88a00 R08: 000000005f1cc119 R09: 00000000a715fae2 R10: ffffafc5cfbb7aa8 R11: ffff9f1cb4be804e R12: ffff9f1265e13000 R13: 0000000000000000 R14: ffffafc5cfbb7b48 R15: ffff9f12dff88b68 FS: 0000000000000000(0000) GS:ffff9f1d3f0c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000911d1 CR3: 0000001575a94006 CR4: 00000000001626e0 Call Trace: fl_lookup+0x134/0x140 [cls_flower] fl_classify+0xf3/0x180 [cls_flower] tcf_classify+0x78/0x150 __netif_receive_skb_core+0x69e/0xa50 netif_receive_skb_internal+0x42/0xf0 tun_get_user+0xdd5/0xfd0 [tun] tun_sendmsg+0x52/0x70 [tun] handle_tx+0x2b3/0x5f0 [vhost_net] vhost_worker+0xab/0x100 [vhost] kthread+0xf8/0x130 ret_from_fork+0x35/0x40 Modules linked in: act_mirred act_gact cls_flower vhost_net vhost tap sch_ingress CR2: 00000000000911d1 Fix the above waiting for a RCU grace period before destroying the rhashtable: we need to use tcf_queue_work(), as rhashtable_destroy() must run in process context, as pointed out by Cong Wang. v1 -> v2: use tcf_queue_work to run rhashtable_destroy(). Fixes: 05cd271f ("cls_flower: Support multiple masks per priority") Signed-off-by: NPaolo Abeni <pabeni@redhat.com> Acked-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We should put copy_skb in receive_queue only after a successful call to virtio_net_hdr_from_skb(). syzbot report : BUG: KASAN: use-after-free in __skb_unlink include/linux/skbuff.h:1843 [inline] BUG: KASAN: use-after-free in __skb_dequeue include/linux/skbuff.h:1863 [inline] BUG: KASAN: use-after-free in skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815 Read of size 8 at addr ffff8801b044ecc0 by task syz-executor217/4553 CPU: 0 PID: 4553 Comm: syz-executor217 Not tainted 4.18.0-rc1+ #111 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __skb_unlink include/linux/skbuff.h:1843 [inline] __skb_dequeue include/linux/skbuff.h:1863 [inline] skb_dequeue+0x16a/0x180 net/core/skbuff.c:2815 skb_queue_purge+0x26/0x40 net/core/skbuff.c:2852 packet_set_ring+0x675/0x1da0 net/packet/af_packet.c:4331 packet_release+0x630/0xd90 net/packet/af_packet.c:2991 __sock_release+0xd7/0x260 net/socket.c:603 sock_close+0x19/0x20 net/socket.c:1186 __fput+0x35b/0x8b0 fs/file_table.c:209 ____fput+0x15/0x20 fs/file_table.c:243 task_work_run+0x1ec/0x2a0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x1b08/0x2750 kernel/exit.c:865 do_group_exit+0x177/0x440 kernel/exit.c:968 __do_sys_exit_group kernel/exit.c:979 [inline] __se_sys_exit_group kernel/exit.c:977 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:977 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4448e9 Code: Bad RIP value. RSP: 002b:00007ffd5f777ca8 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004448e9 RDX: 00000000004448e9 RSI: 000000000000fcfb RDI: 0000000000000001 RBP: 00000000006cf018 R08: 00007ffd0000a45b R09: 0000000000000000 R10: 00007ffd5f777e48 R11: 0000000000000202 R12: 00000000004021f0 R13: 0000000000402280 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 4553: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554 skb_clone+0x1f5/0x500 net/core/skbuff.c:1282 tpacket_rcv+0x28f7/0x3200 net/packet/af_packet.c:2221 deliver_skb net/core/dev.c:1925 [inline] deliver_ptype_list_skb net/core/dev.c:1940 [inline] __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009 call_write_iter include/linux/fs.h:1795 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6c6/0x9f0 fs/read_write.c:487 vfs_write+0x1f8/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 4553: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kmem_cache_free+0x86/0x2d0 mm/slab.c:3756 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582 __kfree_skb net/core/skbuff.c:642 [inline] kfree_skb+0x1a5/0x580 net/core/skbuff.c:659 tpacket_rcv+0x189e/0x3200 net/packet/af_packet.c:2385 deliver_skb net/core/dev.c:1925 [inline] deliver_ptype_list_skb net/core/dev.c:1940 [inline] __netif_receive_skb_core+0x1bfb/0x3680 net/core/dev.c:4611 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 netif_receive_skb_internal+0x12e/0x7d0 net/core/dev.c:4767 netif_receive_skb+0xbf/0x420 net/core/dev.c:4791 tun_rx_batched.isra.55+0x4ba/0x8c0 drivers/net/tun.c:1571 tun_get_user+0x2af1/0x42f0 drivers/net/tun.c:1981 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:2009 call_write_iter include/linux/fs.h:1795 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6c6/0x9f0 fs/read_write.c:487 vfs_write+0x1f8/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b044ecc0 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 0 bytes inside of 232-byte region [ffff8801b044ecc0, ffff8801b044eda8) The buggy address belongs to the page: page:ffffea0006c11380 count:1 mapcount:0 mapping:ffff8801d9be96c0 index:0x0 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c17988 ffff8801d9bec248 ffff8801d9be96c0 raw: 0000000000000000 ffff8801b044e040 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b044eb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8801b044ec00: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc >ffff8801b044ec80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8801b044ed00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b044ed80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc Fixes: 58d19b19 ("packet: vnet_hdr support for tpacket_rcv") Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: Nsyzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 6月, 2018 13 次提交
-
-
由 Anders Roxell 提交于
sha: 702353b5 ("selftest: add test for TCP_INQ") forgot to add tcp_inq to .gitignore. Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harini Katakam 提交于
When delta passed to gem_ptp_adjtime is negative, the sign is maintained in the ns_to_timespec64 conversion. Hence timespec_add should be used directly. timespec_sub will just subtract the negative value thus increasing the time difference. Signed-off-by: NHarini Katakam <harini.katakam@xilinx.com> Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Commit 296d4856 ("ipvlan: inherit MTU from master device") adjusted the mtu from the master device when creating a ipvlan device, but it would also override the mtu value set in rtnl_create_link. It causes IFLA_MTU param not to take effect. So this patch is to not adjust the mtu if IFLA_MTU param is set when creating a ipvlan device. Fixes: 296d4856 ("ipvlan: inherit MTU from master device") Reported-by: NJianlin Shi <jishi@redhat.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcelo Ricardo Leitner 提交于
Currently it is incrementing SctpFragUsrMsgs when the user message size is of the exactly same size as the maximum fragment size, which is wrong. The fix is to increment it only when user message is bigger than the maximum fragment size. Fixes: bfd2e4b8 ("sctp: refactor sctp_datamsg_from_user") Signed-off-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: NNeil Horman <nhorman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After commit 9facc336 ("bpf: reject any prog that failed read-only lock") offsetof(struct bpf_binary_header, image) became 3 instead of 4, breaking powerpc BPF badly, since instructions need to be word aligned. Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Alexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Antoine Tenart 提交于
When injecting frames in the Ocelot switch driver an injection header (IFH) should be used to configure various parameters related to a given frame, such as the port onto which the frame should be departed or its vlan id. Other parameters in the switch configuration can led to an injected frame being sent without an IFH but this led to various issues as the per-frame parameters are then not used. This is especially true when using multiple ports for injection. The IFH was injected with the wrong endianness which led to the switch not taking it into account as the IFH_INJ_BYPASS bit was then unset. (The bit tells the switch to use the IFH over its internal configuration). This patch fixes it. In addition to the endianness fix, the IFH is also fixed. As it was (unwillingly) unused, some of its fields were not configured the right way. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: NAlexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bartosz Golaszewski 提交于
Device tree based systems without of_dev_auxdata will have the mdio device named differently than "davinci_mdio(.0)". In this case use the device's parent's compatible string for matching Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ville Syrjälä 提交于
Pass the correct thing to rtl8169_interrupt() from netpoll. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: netdev@vger.kernel.org Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: David S. Miller <davem@davemloft.net> Fixes: ebcd5daa ("r8169: change interrupt handler argument type") Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vakul Garg 提交于
In function strp_data_ready(), it is useless to call queue_work if the state of strparser is already paused. The state checking should be done before calling queue_work. The change reduces the context switches and improves the ktls-rx throughput by approx 20% (measured on cortex-a53 based platform). Signed-off-by: NVakul Garg <vakul.garg@nxp.com> Acked-by: NDave Watson <davejwatson@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anders Roxell 提交于
Add fragments to pass bridge and vlan tests. Fixes: 33b01b7b ("selftests: add rtnetlink test script") Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
Use $(OBJDUMP) instead of literal 'objdump' to avoid using host toolchain when cross compiling. Fixes: 421780fd ("bpfilter: fix build error") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Reported-by: NStefano Brivio <sbrivio@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Jason Gunthorpe: "Here are eight fairly small fixes collected over the last two weeks. Regression and crashing bug fixes: - mlx4/5: Fixes for issues found from various checkers - A resource tracking and uverbs regression in the core code - qedr: NULL pointer regression found during testing - rxe: Various small bugs" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/rxe: Fix missing completion for mem_reg work requests RDMA/core: Save kernel caller name when creating CQ using ib_create_cq() IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()' RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM IB/mlx5: Fix return value check in flow_counters_set_data() IB/mlx5: Fix memory leak in mlx5_ib_create_flow IB/rxe: avoid double kfree skb
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann. 2) Fix ATM VCC memory accounting, from David Woodhouse. 3) fib6_info objects need RCU freeing, from Eric Dumazet. 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern. 5) Fix clobbered error code in enic_open() failure path, from Govindarajulu Varadarajan. 6) Propagate dev_get_valid_name() error returns properly, from Li RongQing. 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski. 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from Davide Caratti. 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits) ip: limit use of gso_size to udp stmmac: fix DMA channel hang in half-duplex mode net: stmmac: socfpga: add additional ocp reset line for Stratix10 net: sungem: fix rx checksum support bpfilter: ignore binary files bpfilter: fix build error net/usb/drivers: Remove useless hrtimer_active check net/sched: act_ife: preserve the action control in case of error net/sched: act_ife: fix recursive lock and idr leak net: ethernet: fix suspend/resume in davinci_emac net: propagate dev_get_valid_name return code enic: do not overwrite error code net/tcp: Fix socket lookups with SO_BINDTODEVICE ptp: replace getnstimeofday64() with ktime_get_real_ts64() net/ipv6: respect rcu grace period before freeing fib6_info net: net_failover: fix typo in net_failover_slave_register() ipvlan: use ETH_MAX_MTU as max mtu net: hamradio: use eth_broadcast_addr enic: initialize enic->rfs_h.lock in enic_probe MAINTAINERS: Add Sam as the maintainer for NCSI ...
-
- 20 6月, 2018 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID fixes from Jiri Kosina: - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke - fix for hibernation in Intel ISH driver, from Even Xu - crash fix for hid-steam driver, from Rodrigo Rivas Costa - new device ID addition to google-hammer driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation HID: steam: use hid_device.driver_data instead of hid_set_drvdata() HID: google: Add support for whiskers
-
git://git.infradead.org/users/hch/dma-mapping由 Linus Torvalds 提交于
Pull dma-mapping rename from Christoph Hellwig: "Move all the dma-mapping code to kernel/dma and lose their dma-* prefixes" * tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move all DMA mapping code to kernel/dma dma-mapping: use obj-y instead of lib-y for generic dma ops
-
由 Jason Gerecke 提交于
The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains a typo which defines an incorrect logical maximum Y value. This causes a small portion of the bottom of the tablet to become unusable (both because the area is below the "bottom" of the tablet and because 'wacom_wac_event' ignores out-of-range values). It also results in a skewed aspect ratio. To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites the data with the correct value. Signed-off-by: NJason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org # v4.10+ Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Even Xu 提交于
Current ISH driver only registers suspend/resume PM callbacks which don't support hibernation (suspend to disk). Basically after hiberation, the ISH can't resume properly and user may not see sensor events (for example: screen rotation may not work). User will not see a crash or panic or anything except the following message in log: hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device So this patch adds support for S4/hiberbation to ISH by using the SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend and resume functions will now be used for both suspend to RAM and hibernation. If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend and resume related functions won't be used, so mark them as __maybe_unused to clarify that this is the intended behavior, and remove #ifdefs for power management. Cc: stable@vger.kernel.org Signed-off-by: NEven Xu <even.xu@intel.com> Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Rodrigo Rivas Costa 提交于
When creating the low-level hidraw device, the reference to steam_device was stored using hid_set_drvdata(). But this value is not guaranteed to be kept when set before calling probe. If this pointer is reset, it crashes when opening the emulated hidraw device. It looks like hid_set_drvdata() is for users "avobe" this hid_device, while hid_device.driver_data it for users "below" this one. In this case, we are creating a virtual hidraw device, so we must use hid_device.driver_data. Signed-off-by: NRodrigo Rivas Costa <rodrigorivascosta@gmail.com> Tested-by: NMariusz Ceier <mceier+kernel@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Linus Torvalds 提交于
The rewrite of the cmdline fetching missed the fact that we used to also return the final terminating NUL character of the last argument. I hadn't noticed, and none of the tools I tested cared, but something obviously must care, because Michal Kubecek noticed the change in behavior. Tweak the "find the end" logic to actually include the NUL character, and once past the eend of argv, always start the strnlen() at the expected (original) argument end. This whole "allow people to rewrite their arguments in place" is a nasty hack and requires that odd slop handling at the end of the argv array, but it's our traditional model, so we continue to support it. Repored-and-bisected-by: NMichal Kubecek <mkubecek@suse.cz> Reviewed-and-tested-by: NMichal Kubecek <mkubecek@suse.cz> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Willem de Bruijn 提交于
The ipcm(6)_cookie field gso_size is set only in the udp path. The ip layer copies this to cork only if sk_type is SOCK_DGRAM. This check proved too permissive. Ping and l2tp sockets have the same type. Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to exclude ping sockets. v1 -> v2 - remove irrelevant whitespace changes Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Reported-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhadram Varka 提交于
HW does not support Half-duplex mode in multi-queue scenario. Fix it by not advertising the Half-Duplex mode if multi-queue enabled. Signed-off-by: NBhadram Varka <vbhadram@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dinh Nguyen 提交于
The Stratix10 platform has an additional reset line, OCP(Open Core Protocol), that also needs to get deasserted for the stmmac ethernet controller to work. Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build dwmac-socfpga. Also, remove the redundant check for the reset controller pointer. The reset driver already checks for the pointer and returns 0 if the pointer is NULL. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMeelis Roos <mroos@linux.ee> Reported-by: NMathieu Malaterre <malat@debian.org> Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Tested-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-