- 31 3月, 2009 10 次提交
-
-
由 NeilBrown 提交于
The extern function definitions are kernel-internal definitions, so they belong in md_k.h The MD_*_VERSION values could reasonably go in a number of places, but md_u.h seems most reasonable. This leaves almost nothing in md.h. It will go soon. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
.. as they are part of the user-space interface. Also move MdpMinorShift into there so we can remove duplication. Lastly move mdp_major in. It is less obviously part of the user-space interface, but do_mounts_md.c uses it, and it is acting a bit like user-space. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Christoph Hellwig 提交于
Move the headers with the local structures for the disciplines and bitmap.h into drivers/md/ so that they are more easily grepable for hacking and not far away. md.h is left where it is for now as there are some uses from the outside. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Christoph Hellwig 提交于
Use the -y variables instead of the old -objs so we can easily add conditional objects to the modules. Also always use += to add subobjects to avoid problems when placing additional objects in some place in the file. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Christoph Hellwig 提交于
MAJOR_NR was only required for magic in linux/blk.h in 2.4 or earlier kernels, so no need to keep it around. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 Martin K. Petersen 提交于
md: Add support for data integrity to MD If all subdevices support the same protection format the MD device is flagged as integrity capable. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
When we add some spares to an array and start recovery, and we have a bitmap which is stored 'internally' on all devices, we call bitmap_write_all to make sure the bitmap is correct on the new device(s). However that doesn't work as write_sb_page only writes to 'In_sync' devices, and devices undergoing recovery are not 'In_sync' until recovery finishes. So extend write_sb_page (actually next_active_rdev) to include devices that are under recovery. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
It is safe to clear a bit from the write-intent bitmap for a raid1 if we know the data has been written to all devices, which is what the current test does. But it is not always safe to update the 'events_cleared' counter in that case. This is because one request could complete successfully after some other request has partially failed. So simply disable the clearing and updating of events_cleared whenever the array is degraded. This might end up not clearing some bits that could safely be cleared, but it is safest approach. Note that the bug fixed here did not risk corrupting data by letting the array get out-of-sync. Rather it meant that when a device is removed and re-added to the array, it might incorrectly require a full recovery rather than just recovering based on the bitmap. Signed-off-by: NNeilBrown <neilb@suse.de>
-
由 NeilBrown 提交于
md currently insists that the chunk size used for write-intent bitmaps (the amount of data that corresponds to one chunk) be at least one page. The reason for this restriction is lost in the mists of time, but a review of the code (and a vague memory) suggests that the only problem would be related to resync. Resync tries very hard to work in multiples of a page, but also needs to sync with units of a bitmap_chunk too. This connection comes out in the bitmap_start_sync call. So change bitmap_start_sync to always work in multiples of a page. If the bitmap chunk size is less that one page, we flag multiple chunks as 'syncing' and generally make them all appear to the resync routines like one chunk. All other code either already works with data ranges that could span multiple chunks, or explicitly only cares about a single chunk. Signed-off-by: NNeil Brown <neilb@suse.de>
-
由 NeilBrown 提交于
There are two problems with is_mddev_idle. 1/ sync_io is 'atomic_t' and hence 'int'. curr_events and all the rest are 'long'. So if sync_io were to wrap on a 64bit host, the value of curr_events would go very negative suddenly, and take a very long time to return to positive. So do all calculations as 'int'. That gives us plenty of precision for what we need. 2/ To initialise rdev->last_events we simply call is_mddev_idle, on the assumption that it will make sure that last_events is in a suitable range. It used to do this, but now it does not. So now we need to be more explicit about initialisation. Signed-off-by: NNeilBrown <neilb@suse.de>
-
- 10 3月, 2009 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Add p4-clockmod sysfs-ui removal to feature-removal schedule. Revert "[CPUFREQ] Disable sysfs ui for p4-clockmod."
-
由 Oleg Nesterov 提交于
CLONE_PARENT can fool the ->self_exec_id/parent_exec_id logic. If we re-use the old parent, we must also re-use ->parent_exec_id to make sure exit_notify() sees the right ->xxx_exec_id's when the CLONE_PARENT'ed task exits. Also, move down the "p->parent_exec_id = p->self_exec_id" thing, to place two different cases together. Signed-off-by: NOleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Howells <dhowells@redhat.com> Cc: Serge E. Hallyn <serge@hallyn.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Jones 提交于
Signed-off-by: NMatthew Garrett <mjg@redhat.com> Signed-off-by: NDave Jones <davej@redhat.com>
-
由 Dave Jones 提交于
This reverts commit e088e4c9. Removing the sysfs interface for p4-clockmod was flagged as a regression in bug 12826. Course of action: - Find out the remaining causes of overheating, and fix them if possible. ACPI should be doing the right thing automatically. If it isn't, we need to fix that. - mark p4-clockmod ui as deprecated - try again with the removal in six months. It's not really feasible to printk about the deprecation, because it needs to happen at all the sysfs entry points, which means adding a lot of strcmp("p4-clockmod".. calls to the core, which.. bleuch. Signed-off-by: NDave Jones <davej@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits) p54: fix race condition in memory management cfg80211: test before subtraction on unsigned iwlwifi: fix error flow in iwl*_pci_probe rt2x00 : more devices to rt73usb.c rt2x00 : more devices to rt2500usb.c bonding: Fix device passed into ->ndo_neigh_setup(). vlan: Fix vlan-in-vlan crashes. net: Fix missing dev->neigh_setup in register_netdevice(). tmspci: fix request_irq race pkt_sched: act_police: Fix a rate estimator test. tg3: Fix 5906 link problems SCTP: change sctp_ctl_sock_init() to try IPv4 if IPv6 fails IPv6: add "disable" module parameter support to ipv6.ko sungem: another error printed one too early aoe: error printed 1 too early net pcmcia: worklimit reaches -1 net: more timeouts that reach -1 net: fix tokenring license dm9601: new vendor/product IDs netlink: invert error code in netlink_set_err() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: fix for CONFIG_SPARSE_IRQ=y lguest: fix crash 'unhandled trap 13 at <native_read_msr_safe>'
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix spinlock assertions on UP systems
-
- 09 3月, 2009 20 次提交
-
-
由 Chris Mason 提交于
btrfs_tree_locked was being used to make sure a given extent_buffer was properly locked in a few places. But, it wasn't correct for UP compiled kernels. This switches it to using assert_spin_locked instead, and renames it to btrfs_assert_tree_locked to better reflect how it was really being used. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Heiko Carstens 提交于
Frans Pop reported the crash below when running an s390 kernel under Hercules: Kernel BUG at 000738b4 verbose debug info unavailable! fixpoint divide exception: 0009 #1! SMP Modules linked in: nfs lockd nfs_acl sunrpc ctcm fsm tape_34xx cu3088 tape ccwgroup tape_class ext3 jbd mbcache dm_mirror dm_log dm_snapshot dm_mod dasd_eckd_mod dasd_mod CPU: 0 Not tainted 2.6.27.19 #13 Process awk (pid: 2069, task: 0f9ed9b8, ksp: 0f4f7d18) Krnl PSW : 070c1000 800738b4 (acct_update_integrals+0x4c/0x118) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:0 CC:1 PM:0 Krnl GPRS: 00000000 000007d0 7fffffff fffff830 00000000 ffffffff 00000002 0f9ed9b8 00000000 00008ca0 00000000 0f9ed9b8 0f9edda4 8007386e 0f4f7ec8 0f4f7e98 Krnl Code: 800738aa: a71807d0 lhi %r1,2000 800738ae: 8c200001 srdl %r2,1 800738b2: 1d21 dr %r2,%r1 >800738b4: 5810d10e l %r1,270(%r13) 800738b8: 1823 lr %r2,%r3 800738ba: 4130f060 la %r3,96(%r15) 800738be: 0de1 basr %r14,%r1 800738c0: 5800f060 l %r0,96(%r15) Call Trace: ( <000000000004fdea>! blocking_notifier_call_chain+0x1e/0x2c) <0000000000038502>! do_exit+0x106/0x7c0 <0000000000038c36>! do_group_exit+0x7a/0xb4 <0000000000038c8e>! SyS_exit_group+0x1e/0x30 <0000000000021c28>! sysc_do_restart+0x12/0x16 <0000000077e7e924>! 0x77e7e924 Reason for this is that cpu time accounting usually only happens from interrupt context, but acct_update_integrals gets also called from process context with interrupts enabled. So in acct_update_integrals we may end up with the following scenario: Between reading tsk->stime/tsk->utime and tsk->acct_timexpd an interrupt happens which updates accouting values. This causes acct_timexpd to be greater than the former stime + utime. The subsequent calculation of dtime = cputime_sub(time, tsk->acct_timexpd); will be negative and the division performed by cputime_to_jiffies(dtime) will generate an exception since the result won't fit into a 32 bit register. In order to fix this just always disable interrupts while accessing any of the accounting values. Reported by: Frans Pop <elendil@planet.nl> Tested by: Frans Pop <elendil@planet.nl> Cc: stable@kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rusty Russell 提交于
Impact: remove lots of lguest boot WARN_ON() when CONFIG_SPARSE_IRQ=y We now need to call irq_to_desc_alloc_cpu() before set_irq_chip_and_handler_name(), but we can't do that from init_IRQ (no kmalloc available). So do it as we use interrupts instead. Also means we only alloc for irqs we use, which was the intent of CONFIG_SPARSE_IRQ anyway. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@redhat.com>
-
由 Rusty Russell 提交于
Impact: fix lguest boot crash on modern Intel machines The code in early_init_intel does: if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { u64 misc_enable; rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); And that rdmsr faults (not allowed from non-0 PL). We can get around this by mugging the family ID part of the cpuid. 5 seems like a good number. Of course, this is a hack (how very lguest!). We could just indicate that we don't support MSRs, or implement lguest_rdmst. Reported-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Tested-by: NPatrick McHardy <kaber@trash.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: fix data timeout for SEND_EXT_CSD
-
由 Linus Torvalds 提交于
Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: increment quiescent state counter in ksoftirqd()
-
由 Linus Torvalds 提交于
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pebs: correct qualifier passed to ds_write_config() from ds_request_pebs() x86, bts: remove bad warning x86: add Dell XPS710 reboot quirk x86, math-emu: fix init_fpu for task != current x86: EFI: Back efi_ioremap with init_memory_mapping instead of FIX_MAP x86: fix DMI on EFI
-
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] orion5x_wdt.c: 'ORION5X_TCLK' undeclared [WATCHDOG] gef_wdt.c: fsl_get_sys_freq() failure not noticed [WATCHDOG] ks8695_wdt.c: 'CLOCK_TICK_RATE' undeclared [WATCHDOG] rc32434_wdt: fix sections [WATCHDOG] rc32434_wdt: fix watchdog driver
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix ext4_free_inode() vs. ext4_claim_inode() race
-
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (28 commits) Blackfin arch: SPI_MMC is now mainlined MMC_SPI Blackfin arch: disable legacy /proc/scsi/ support by default Blackfin arch: remove duplicated ANOMALY_05000448 ifdef check Blackfin arch: add stubs for anomalies 447 and 448 Blackfin arch: cleanup bfin_sport.h header and export it to userspace Blackfin arch: fix bug - gdb signull case make trunk kernel panic frequently Blackfin arch: remove spurious dash when dcache is off Blackfin arch: mark init_pda as __init as only __init funcs all it Blackfin arch: fix bug - On bf548-ezkit, ethernet fails to work after wakeup from "mem" Blackfin arch: Random read/write errors are a bad thing Blackfin arch: update default kernel config, select KSZ8893M driver for BF518 Blackfin arch: Fix bug - KGDB single step into the middle of a 4 bytes instruction on bf561 after soft bp is hit Blackfin arch: Fix bug - make ksz8893m driver available when bfin_mac is enabled Blackfin arch: make sure people do not set the kernel load address too high Blackfin arch: fix bug - The SPORT_HYS bit is not set for BF561 0.5 Blackfin arch: update anomaly sheets to match latest public info Blackfin arch: Fix BUG - kernel fails to build in pm.c when allow wakeup fromi standby by GPIO Blackfin arch: PM_BFIN_WAKE_GP: update help Blackfin arch: fix bug - kgdb fails to continue after setting breakpoint on bf561-ezkit kernel with smp patch Blackfin arch: Enable Write Back Cache on all Blackfin Boards ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: dmatest: fix use after free in dmatest_exit ipu_idmac: fix spinlock type iop-adma, mv_xor: fix mem leak on self-test setup failure fsldma: fix off by one in dma_halt I/OAT: fail self-test if callback test reaches timeout I/OAT: update driver version and copyright dates I/OAT: list usage cleanup I/OAT: set tcp_dma_copybreak to 256k for I/OAT ver.3 I/OAT: cancel watchdog before dma remove I/OAT: fail initialization on zero channels detection I/OAT: do not set DCACTRL_CMPL_WRITE_ENABLE for I/OAT ver.3 I/OAT: add verification for proper APICID_TAG_MAP setting by BIOS dmaengine: update kerneldoc
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: ata: add CFA specific identify data words remove stale comment from <linux/hdreg.h> AT91: initialize Compact Flash on AT91SAM9263 cpu ide: add at91_ide driver ide: allow to wrap interrupt handler ide-iops: fix odd-length ATAPI PIO transfers ide: NULL noise: drivers/ide/ide-*.c ide: expiry() returns int, negative expiry() return values won't be noticed
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Don't trust current capacity values in identify words 57-58 libata: make sure port is thawed when skipping resets sata_nv: fix module parameter description ahci: Add the Device IDs for MCP89 and remove IDs of MCP7B to/from ahci.c libata: don't use on-stack sense buffer libata: align ap->sector_buf libata: fix dma_unmap_sg misuse libata: change drive ready wait after hard reset to 5s
-
git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus: Squashfs: frag_size should be signed, as it can hold an error result Squashfs: fix documentation typo, Cramfs filesystem limit is 256 MiB Squashfs: Fix oops when reading fsfuzzer corrupted filesystems
-
由 Linus Torvalds 提交于
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: smack: fixes for unlabeled host support
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: serio - fix protocol number for TouchIT213
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix PCI DMA flag propagation on SN (Altix) with PICs
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: block: fix missing bio back/front segment size setting in blk_recount_segments() loop: don't increment p->offset with (size_t) -EINVAL cciss: remove 30 second initial timeout on controller reset Fix kernel NULL pointer dereference in xen-blkfront
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix headphone-detect regression with multiple HP jacks ALSA: hda - Fix typos in slave controls in patch_sigmatel.c
-
由 Ralf Baechle 提交于
This is a build fix required after "x86-64: seccomp: fix 32/64 syscall hole" (commit 5b101740). MIPS doesn't have the issue that was fixed for x86-64 by that patch. This also doesn't solve the N32 issue which is that N32 seccomp processes will be treated as non-compat processes thus only have access to N64 syscalls. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 3月, 2009 2 次提交
-
-
由 Adrian Hunter 提交于
Commit 0d3e0460 "MMC: CSD and CID timeout values" inadvertently broke the timeout for the MMC command SEND_EXT_CSD. This patch puts it back again. Depending on the characteristics of the controller, this bug may prevent the use of MMC cards. Signed-off-by: NAdrian Hunter <adrian.hunter@nokia.com> Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
-
由 Dmitry Torokhov 提交于
Protocol 0x37 has been reserved for iNexio devices and Sahara was supposed to get 0x38. Reported-by: NClaudio Nieder <private@claudio.ch> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 07 3月, 2009 1 次提交
-
-
由 Christian Lamparter 提交于
This patch fixes a number of race conditions in the driver. Up until now, "entry" pointer was initialized before acquiring the right lock. Signed-off-by: NChristian Lamparter <chunkeey@web.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-