- 17 7月, 2015 9 次提交
-
-
由 Alex Deucher 提交于
This is necessary to properly reset the min/max limits before clamping them otherwise we may get improper clamping depending on what what was the last forced level. Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Always respect the harvest configuration as is. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
v2: squash in later fix Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we run into a part with a harvest configuration where the entire IP block is unusable, just disable the IP block. v2: fix logic as noted by Christian Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
-
由 Christian König 提交于
Just to make sure userspace don't send nonsense to the kernel. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NJammy Zhou <Jammy.Zhou@amd.com>
-
由 Christian König 提交于
Port of amdgpu patch 9298e52f. Signed-off-by: NChristian König <christian.koenig@amd.com> CC: stable@vger.kernel.org Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
This can be the case when the GPU is powered off, e.g. via vgaswitcheroo or runpm. When the GPU is powered up again, radeon_gart_table_vram_pin flushes the TLB after setting rdev->gart.ptr to non-NULL. Fixes panic on powering off R7xx GPUs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61529Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 16 7月, 2015 8 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull TPM bugfixes from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm, tpm_crb: fail when TPM2 ACPI table contents look corrupted tpm: Fix initialization of the cdev
-
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma由 Linus Torvalds 提交于
Pull rdma fixes from Doug Ledford: "Mainly fix-ups for the various 4.2 items" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (24 commits) IB/core: Destroy ocrdma_dev_id IDR on module exit IB/core: Destroy multcast_idr on module exit IB/mlx4: Optimize do_slave_init IB/mlx4: Fix memory leak in do_slave_init IB/mlx4: Optimize freeing of items on error unwind IB/mlx4: Fix use of flow-counters for process_mad IB/ipath: Convert use of __constant_<foo> to <foo> IB/ipoib: Set MTU to max allowed by mode when mode changes IB/ipoib: Scatter-Gather support in connected mode IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES IB/ipoib: Prevent lockdep warning in __ipoib_ib_dev_flush IB/ucma: Fix lockdep warning in ucma_lock_files rds: rds_ib_device.refcount overflow RDMA/nes: Fix for incorrect recording of the MAC address RDMA/nes: Fix for resolving the neigh RDMA/core: Fixes for port mapper client registration IB/IPoIB: Fix bad error flow in ipoib_add_port() IB/mlx4: Do not attemp to report HCA clock offset on VFs IB/cm: Do not queue work to a device that's going away IB/srp: Avoid using uninitialized variable ...
-
git://git.samba.org/jlayton/linux由 Linus Torvalds 提交于
Pull file locking updates from Jeff Layton: "I had thought that I was going to get away without a pull request this cycle. There was a NFSv4 file locking problem that cropped up that I tried to fix in the NFSv4 code alone, but that fix has turned out to be problematic. These patches fix this in the correct way. Note that this touches some NFSv4 code as well. Ordinarily I'd wait for Trond to ACK this, but he's on holiday right now and the bug is rather nasty. So I suggest we merge this and if he raises issues with it we can sort it out when he gets back" Acked-by: NBruce Fields <bfields@fieldses.org> Acked-by: NDan Williams <dan.j.williams@intel.com> [ +1 to this series fixing a 100% reproducible slab corruption + general protection fault in my nfs-root test environment. - Dan ] Acked-by: NAnna Schumaker <Anna.Schumaker@Netapp.com> * tag 'locks-v4.2-1' of git://git.samba.org/jlayton/linux: locks: inline posix_lock_file_wait and flock_lock_file_wait nfs4: have do_vfs_lock take an inode pointer locks: new helpers - flock_lock_inode_wait and posix_lock_inode_wait locks: have flock_lock_file take an inode pointer instead of a filp Revert "nfs: take extra reference to fl->fl_file when running a LOCKU operation"
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
Pull KVM fixes from Paolo Bonzini: - Fix FPU refactoring ("kvm: x86: fix load xsave feature warning") - Fix eager FPU mode (Cc stable) - AMD bits of MTRR virtualization * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: x86: fix load xsave feature warning KVM: x86: apply guest MTRR virtualization on host reserved pages KVM: SVM: Sync g_pat with guest-written PAT value KVM: SVM: use NPT page attributes KVM: count number of assigned devices KVM: VMX: fix vmwrite to invalid VMCS KVM: x86: reintroduce kvm_is_mmio_pfn x86: hyperv: add CPUID bit for crash handlers
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc由 Linus Torvalds 提交于
Pull ARC fixes from Vineet Gupta: - Makefile changes (top-level+ARC) reinstates -O3 builds (regression since 3.16) - IDU intc related fixes, IRQ affinity - patch to make bitops safer for ARC - perf fix from Alexey to remove signed PC braino - Futex backend gets llock/scond support * tag 'arc-v4.2-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARCv2: support HS38 releases ARC: make sure instruction_pointer() returns unsigned value ARC: slightly refactor macros for boot logging ARC: Add llock/scond to futex backend arc:irqchip: prepare for drivers/irqchip/irqchip.h removal ARC: Make ARC bitops "safer" (add anti-optimization) ARCv2: [axs103] bump CPU frequency from 75 to 90 MHZ ARCv2: intc: IDU: Fix potential race in installing a chained IRQ handler ARCv2: intc: IDU: support irq affinity ARC: fix unused var wanring ARC: Don't memzero twice in dma_alloc_coherent for __GFP_ZERO ARC: Override toplevel default -O2 with -O3 kbuild: Allow arch Makefiles to override {cpp,ld,c}flags ARCv2: guard SLC DMA ops with spinlock ARC: Kconfig: better way to disable ARC_HAS_LLSC for ARC_CPU_750D
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "One improvement for the zcrypt driver, the quality attribute for the hwrng device has been missing. Without it the kernel entropy seeding will not happen automatically. And six bug fixes, the most important one is the fix for the vector register corruption due to machine checks" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/nmi: fix vector register corruption s390/process: fix sfpc inline assembly s390/dasd: fix kernel panic when alias is set offline s390/sclp: clear upper register halves in _sclp_print_early s390/oprofile: fix compile error s390/sclp: fix compile error s390/zcrypt: enable s390 hwrng to seed kernel entropy
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux由 Linus Torvalds 提交于
Pull final init.h/module.h code relocation from Paul Gortmaker: "With the release of 4.2-rc2 done, we should not be seeing any new code added that gets upset by this small code move, and we've banked yet another complete week of testing with this move in place on top of 4.2-rc1 via linux-next to ensure that remained true. Given that, I'd like to put it in now so that people formulating new work for 4.3-rc1 will be exposed to the ever so slightly stricter (but sensible) requirements wrt. whether they are needing init.h vs. module.h macros, even if they are not using linux-next. The diffstat of the move is slightly asymmetrical due to needing to leave behind a couple #ifdef in the old location and add the same ones to the new location, but other than that, it is a 1:1 move, complete with the module_init/exit trailing semicolon that we can't fix. That is, until/unless someone does a tree-wide sed fix of all the approximately 800 currently in tree users relying on it" * tag 'module-final-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: module: relocate module_init from init.h to module.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing fix from Steven Rostedt: "Fengguang Wu discovered a crash that happened to be because of the branch tracer (traces unlikely and likely branches) when enabled with certain debug options. What happened was that various debug options like lockdep and DEBUG_PREEMPT can cause parts of the branch tracer to recurse outside its recursion protection. In fact, part of its recursion protection used these features that caused the lockup. This cleans up the code a little and makes the recursion protection a bit more robust" * tag 'trace-v4.2-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have branch tracer use recursive field of task struct
-
- 15 7月, 2015 23 次提交
-
-
-
由 Johannes Thumshirn 提交于
Destroy ocrdma_dev_id IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Johannes Thumshirn 提交于
Destroy multcast_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Doug Ledford 提交于
There is little chance our memory allocation will fail, so we can combine initializing the work structs with allocating them instead of looping through all of them once to allocate and again to initialize. Then when we need to actually find out if our device is up or in the process of going down, have all of our work structs batched up, take the spin_lock once and only once, and do all of the batch under the one spin_lock invocation instead of incurring all of the locked memory cycles we would otherwise incur to take/release the spin_lock over and over again. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Doug Ledford 提交于
We create a number of work structs to be queued up to a workqueue, and on completion of the workqueue handler, the workqueue handler frees the allocated memory. If, however, we don't queue the work struct because the device is going down, then we need to free the memory ourselves. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Maninder Singh 提交于
On failure, we loop through all possible pointers and test them before calling kfree. But really, why even attempt to free items we didn't allocate when we can easily loop through exactly and only the devices for which the original memory allocation succeeded and free just those. Signed-off-by: NManinder Singh <maninder1.s@samsung.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Or Gerlitz 提交于
For IB links, reading HCA flow counters through iboe_process_mad() should be used when mlx4_ib_process_mad() is invoked only for VFs PMA queries and exactly nothing else. Fixes: 7193a141 ('IB/mlx4: Set VF to read from QP counters') Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Vaishali Thakkar 提交于
In little endian cases, the macros be16_to_cpu and cpu_to_be64 unfolds to __swab{16,64} which provides special case for constants. In big endian cases, __constant_be16_to_cpu and be16_to_cpu expand directly to the same expression. The same applies for __constant_cpu_to_be64 and cpu_to_be64. So, replace __constant_be16_to_cpu with be16_to_cpu and __constant_cpu_to_be64 with cpu_to_be64, with the goal of getting rid of the definition of __constant_be16_to_cpu and __constant_cpu_to_be64 completely. Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Erez Shitrit 提交于
When switching between modes (datagram / connected) change the MTU accordingly. datagram mode up to 4K, connected mode up to (64K - 0x10). Signed-off-by: NELi Cohen <eli@mellanox.com> Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Yuval Shaia 提交于
By default, IPoIB-CM driver uses 64k MTU. Larger MTU gives better performance. This MTU plus overhead puts the memory allocation for IP based packets at 32 4k pages (order 5), which have to be contiguous. When the system memory under pressure, it was observed that allocating 128k contiguous physical memory is difficult and causes serious errors (such as system becomes unusable). This enhancement resolve the issue by removing the physically contiguous memory requirement using Scatter/Gather feature that exists in Linux stack. With this fix Scatter-Gather will be supported also in connected mode. This change reverts some of the change made in commit e112373f ("IPoIB/cm: Reduce connected mode TX object size"). The ability to use SG in IPoIB CM is possible because the coupling between NETIF_F_SG and NETIF_F_CSUM was removed in commit ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Acked-by: NChristian Marie <christian@ponies.io> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Carol L Soto 提交于
ib_ucm_release_dev clears the wrong bit if devnum is greater than IB_UCM_MAX_DEVICES. Signed-off-by: NCarol L Soto <clsoto@linux.vnet.ibm.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Haggai Eran 提交于
__ipoib_ib_dev_flush calls itself recursively on child devices, and lockdep complains about locking vlan_rwsem twice (see below). Use down_read_nested instead of down_read to prevent the warning. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc4+ #36 Tainted: G O --------------------------------------------- kworker/u20:2/261 is trying to acquire lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] but task is already holding lock: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&priv->vlan_rwsem); lock(&priv->vlan_rwsem); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by kworker/u20:2/261: #0: ("%s""ipoib_flush"){.+.+..}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #1: ((&priv->flush_heavy)){+.+...}, at: [<ffffffff810827cc>] process_one_work+0x15c/0x760 #2: (&priv->vlan_rwsem){.+.+..}, at: [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] stack backtrace: CPU: 3 PID: 261 Comm: kworker/u20:2 Tainted: G O 4.1.0-rc4+ #36 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 Workqueue: ipoib_flush ipoib_ib_dev_flush_heavy [ib_ipoib] ffff8801c6c54790 ffff8801c9927af8 ffffffff81665238 0000000000000001 ffffffff825b5b30 ffff8801c9927bd8 ffffffff810bba51 ffff880100000000 ffffffff00000001 ffff880100000001 ffff8801c6c55428 ffff8801c6c54790 Call Trace: [<ffffffff81665238>] dump_stack+0x4f/0x6f [<ffffffff810bba51>] __lock_acquire+0x741/0x1820 [<ffffffff810bcbf8>] lock_acquire+0xc8/0x240 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffff81669d2c>] down_read+0x4c/0x70 [<ffffffffa0791e2a>] ? __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e2a>] __ipoib_ib_dev_flush+0x3a/0x2b0 [ib_ipoib] [<ffffffffa0791e4a>] __ipoib_ib_dev_flush+0x5a/0x2b0 [ib_ipoib] [<ffffffffa07920ba>] ipoib_ib_dev_flush_heavy+0x1a/0x20 [ib_ipoib] [<ffffffff81082871>] process_one_work+0x201/0x760 [<ffffffff810827cc>] ? process_one_work+0x15c/0x760 [<ffffffff81082ef0>] worker_thread+0x120/0x4d0 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81082dd0>] ? process_one_work+0x760/0x760 [<ffffffff81088b7e>] kthread+0xfe/0x120 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8166c6e2>] ret_from_fork+0x42/0x70 [<ffffffff81088a80>] ? __init_kthread_worker+0x70/0x70 Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Haggai Eran 提交于
The ucma_lock_files() locks the mut mutex on two files, e.g. for migrating an ID. Use mutex_lock_nested() to prevent the warning below. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc6-hmm+ #40 Tainted: G O --------------------------------------------- pingpong_rpc_se/10260 is trying to acquire lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] but task is already holding lock: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&file->mut); lock(&file->mut); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by pingpong_rpc_se/10260: #0: (&file->mut){+.+.+.}, at: [<ffffffffa047ac4b>] ucma_migrate_id+0xbb/0x248 [rdma_ucm] stack backtrace: CPU: 0 PID: 10260 Comm: pingpong_rpc_se Tainted: G O 4.1.0-rc6-hmm+ #40 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 ffff8801f85b63d0 ffff880195677b58 ffffffff81668f49 0000000000000001 ffffffff825cbbe0 ffff880195677c38 ffffffff810bb991 ffff880100000000 ffff880100000000 ffff880100000001 ffff8801f85b7010 ffffffff8121bee9 Call Trace: [<ffffffff81668f49>] dump_stack+0x4f/0x6e [<ffffffff810bb991>] __lock_acquire+0x741/0x1820 [<ffffffff8121bee9>] ? dput+0x29/0x320 [<ffffffff810bcb38>] lock_acquire+0xc8/0x240 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff8166b901>] ? mutex_lock_nested+0x291/0x3e0 [<ffffffff8166b6d5>] mutex_lock_nested+0x65/0x3e0 [<ffffffffa047ac55>] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffff810baeed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff8166b66e>] ? mutex_unlock+0xe/0x10 [<ffffffffa047ac55>] ucma_migrate_id+0xc5/0x248 [rdma_ucm] [<ffffffffa0478474>] ucma_write+0xa4/0xb0 [rdma_ucm] [<ffffffff81200674>] __vfs_write+0x34/0x100 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff810ec055>] ? current_kernel_time+0xc5/0xe0 [<ffffffff812aa4d3>] ? security_file_permission+0x23/0x90 [<ffffffff8120088d>] ? rw_verify_area+0x5d/0xe0 [<ffffffff812009bb>] vfs_write+0xab/0x120 [<ffffffff81201519>] SyS_write+0x59/0xd0 [<ffffffff8112427c>] ? __audit_syscall_entry+0xac/0x110 [<ffffffff8166ffee>] system_call_fastpath+0x12/0x76 Signed-off-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Wengang Wang 提交于
Fixes: 3e0249f9 ("RDS/IB: add refcount tracking to struct rds_ib_device") There lacks a dropping on rds_ib_device.refcount in case rds_ib_alloc_fmr failed(mr pool running out). this lead to the refcount overflow. A complain in line 117(see following) is seen. From vmcore: s_ib_rdma_mr_pool_depleted is 2147485544 and rds_ibdev->refcount is -2147475448. That is the evidence the mr pool is used up. so rds_ib_alloc_fmr is very likely to return ERR_PTR(-EAGAIN). 115 void rds_ib_dev_put(struct rds_ib_device *rds_ibdev) 116 { 117 BUG_ON(atomic_read(&rds_ibdev->refcount) <= 0); 118 if (atomic_dec_and_test(&rds_ibdev->refcount)) 119 queue_work(rds_wq, &rds_ibdev->free_work); 120 } fix is to drop refcount when rds_ib_alloc_fmr failed. Signed-off-by: NWengang Wang <wen.gang.wang@oracle.com> Reviewed-by: NHaggai Eran <haggaie@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
Fix for incorrect recording of the MAC address Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
Neighbor resolution doesn't work without this fix Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Tatyana Nikolova 提交于
Fixes to allow clients to make remove mapping requests, after they have provided the user space service with the mapping information, they are using when the service is restarted. 1) Adding IWPM_REG_VALID, IWPM_REG_INCOMPL and IWPM_REG_UNDEF registration types for the port mapper clients and functions to set/check the registration type. 2) If the port mapper user space service is not available to register the client, then its registration stays IWPM_REG_UNDEF and the registration isn't checked until the service becomes available (no mappings are possible, if the user space service isn't running). 3) After the service is restarted, the user space port mapper pid is set to valid and the client registration is set to IWPM_REG_INCOMPL to allow the client to make remove mapping requests. Signed-off-by: NTatyana Nikolova <Tatyana.E.Nikolova@intel.com> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Tested-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Amir Vadai 提交于
Error values of ib_query_port() and ib_query_device() weren't propagated correctly. Because of that, ipoib_add_port() could return NULL value, which escaped the IS_ERR() check in ipoib_add_one() and we crashed. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
mlx4 VFs can provide CQE raw time-stamping services, but they don't have the hca core clock mapped to their PCI bars. As such, we should not attempt to query and report the clock offset to user space for VFs. Doing so causes query_device over VFs to fail with -ENOSUPP. Fixes: 4b664c43 ('IB/mlx4: Add support for CQ time-stamping') Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Erez Shitrit 提交于
Whenever ib_cm gets remove_one call, like when there is a hot-unplug event, the driver should mark itself as going_down and confirm that no new works are going to be queued for that device. so, the order of the actions are: 1. mark the going_down bit. 2. flush the wq. 3. [make sure no new works for that device.] 4. unregister mad agent. otherwise, works that are already queued can be scheduled after the mad agent was freed. Signed-off-by: NErez Shitrit <erezsh@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Sagi Grimberg 提交于
We might return res which is not initialized. Also reduce code duplication by exporting srp_parse_tmo so srp_tmo_set can reuse it. Detected by Coverity. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NJenny Falkovich <jennyf@mellanox.com> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Vaishali Thakkar 提交于
In little endian cases, the macro cpu_to_be{16,32,64} unfolds to __swab{16,32,64} which provides special case for constants. In big endian cases, __constant_cpu_to_be{16,32,64} and cpu_to_be{16,32,64} expand directly to the same expression. So, replace __constant_cpu_to_be{16,32,64} with cpu_to_be{16,32,64} with the goal of getting rid of the definitions of __constant_cpu_to_be{16,32,64} completely. The Coccinelle semantic patch that performs this transformation is as follows: @@expression x;@@ ( - __constant_cpu_to_be16(x) + cpu_to_be16(x) | - __constant_cpu_to_be32(x) + cpu_to_be32(x) | - __constant_cpu_to_be64(x) + cpu_to_be64(x) ) Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ira Weiny 提交于
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c947 ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-