- 01 1月, 2015 1 次提交
-
-
由 Yongjian Xu 提交于
If the check of adapter fails and goes into the 'else' branch, the return value 'err' should not still be zero. Signed-off-by: NYongjian Xu <xuyongjiande@gmail.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 12月, 2014 1 次提交
-
-
由 Jesse Gross 提交于
GSO isn't the only offload feature with restrictions that potentially can't be expressed with the current features mechanism. Checksum is another although it's a general issue that could in theory apply to anything. Even if it may be possible to implement these restrictions in other ways, it can result in duplicate code or inefficient per-packet behavior. This generalizes ndo_gso_check so that drivers can remove any features that don't make sense for a given packet, similar to netif_skb_features(). It also converts existing driver restrictions to the new format, completing the work that was done to support tunnel protocols since the issues apply to checksums as well. By actually removing features from the set that are used to do offloading, it solves another problem with the existing interface. In these cases, GSO would run with the original set of features and not do anything because it appears that segmentation is not required. CC: Tom Herbert <therbert@google.com> CC: Joe Stringer <joestringer@nicira.com> CC: Eric Dumazet <edumazet@google.com> CC: Hayes Wang <hayeswang@realtek.com> Signed-off-by: NJesse Gross <jesse@nicira.com> Acked-by: NTom Herbert <therbert@google.com> Fixes: 04ffcb25 ("net: Add ndo_gso_check") Tested-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2014 2 次提交
-
-
由 Jiri Pirko 提交于
So this can be reused for identification of other "items" as well. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Reviewed-by: NThomas Graf <tgraf@suug.ch> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Do the work of parsing NDA_VLAN directly in rtnetlink code, pass simple u16 vid to drivers from there. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com> Acked-by: NJamal Hadi Salim <jhs@mojatatu.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 11月, 2014 1 次提交
-
-
由 Joe Stringer 提交于
Use vxlan_gso_check() to advertise offload support for this NIC. Signed-off-by: NJoe Stringer <joestringer@nicira.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2014 2 次提交
-
-
由 Shahed Shaikh 提交于
This patch adds support to run Power On Self Test (POST) for 83xx adapters. POST can be run in 3 different speed modes : i) Fast mode (takes about 690 ms) ii) Medium mode (takes about 2930 ms) iii) Slow mode (takes about 7500 ms) To run POST, firmware file with name "83xx_post_fw.bin" should be present under /lib/firmware directory. load_fw_file module parameter is used to specify POST operation and its speed mode. load_fw_file = 2 : Fast mode load_fw_file = 3 : Medium mode load_fw_file = 4 : Slow mode Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 8月, 2014 1 次提交
-
-
由 Benoit Taine 提交于
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: NBenoit Taine <benoit.taine@lip6.fr> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 06 8月, 2014 2 次提交
-
-
由 Rajesh Borundia 提交于
o Initialization of dcbnl_ops after register netdev may result in dcbnl_ops not getting set before it is being accessed from open. So, moving it before register_netdev. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Earlier, set_drv_version was getting called after register_netdev. This was resulting in a race between set_drv_version and FLR called from open(). Moving set_drv_version before register_netdev avoids the race. o Log response code in error message on CDRP failure. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2014 1 次提交
-
-
由 Jamal Hadi Salim 提交于
Dumping a bridge fdb dumps every fdb entry held. With this change we are going to filter on selected bridge port. Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 7月, 2014 1 次提交
-
-
由 Harish Patil 提交于
- Collect a firmware dump on first Tx timeout if netif_msg_tx_err() is set - Log Receive and Status ring info on Tx timeout, in addition to Tx ring info - Log additional Tx ring info if netif_msg_tx_err() is set Signed-off-by: NHarish Patil <harish.patil@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 6月, 2014 2 次提交
-
-
由 Shahed Shaikh 提交于
- Check interrupt mode at the start of qlcnic_set_channels(). - Do not validate ring count if they are not going to change. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Pre-allocate the physically contiguous DMA buffer used for minidump collection at driver load time, rather than at run time, to minimize allocation failures. Driver will allocate the buffer at load time if PEX DMA support capability is indicated by the adapter. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 5月, 2014 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed to have a bandwidth of at least this value. max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth of up to this value. o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced which takes 4 arguments: netdev, VF number, min_tx_rate, max_tx_rate o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler. o Drivers that currently implement ndo_set_vf_tx_rate should now call ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet implemented by driver. o If user enters only one of either min_tx_rate or max_tx_rate, then, userland should read back the other value from driver and set both for IFLA_VF_RATE. Drivers that have not yet implemented IFLA_VF_RATE should always return min_tx_rate as 0 when read from ip tool. o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then IFLA_VF_RATE should override. o Idea is to have consistent display of rate values to user. o Usage example: - ./ip link set p4p1 vf 0 rate 900 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300 ./ip link show p4p1 32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000 link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps, min_tx_rate 200Mbps vf 1 MAC f6:c6:7c:3f:3d:6c vf 2 MAC 56:32:43:98:d7:71 vf 3 MAC d6:be:c3:b5:85:ff vf 4 MAC ee:a9:9a:1e:19:14 vf 5 MAC 4a:d0:4c:07:52:18 vf 6 MAC 3a:76:44:93:62:f9 vf 7 MAC 82:e9:e7:e3:15:1a Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 5月, 2014 1 次提交
-
-
由 Wilfried Klaebe 提交于
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: NDave Miller <davem@davemloft.net> Signed-off-by: NWilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: NFelipe Balbi <balbi@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 5月, 2014 1 次提交
-
-
由 dingtianhong 提交于
The __vlan_find_dev_deep should always called in RCU, according David's suggestion, rename to __vlan_find_dev_deep_rcu looks more reasonable. Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 5月, 2014 3 次提交
-
-
由 Rajesh Borundia 提交于
o SR-IOV VF can be uplinked to bridge/macvtap device. Enable mac learning to support communication through embedded switch. o Learn vlan filters based on QLCNIC_VLAN_FILTERING flag. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Commands from VF may sleep during PF-VF communication. Earlier we use to process qlcnic_sriov_vf_set_multi function in process context. Now individual commands that are called in atomic context are processed in process context without waiting for completion of command. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Add support for SR-IOV VF probe in hypervisor to enable assignment of VFs within hypervisor. o SR-IOV VF can be uplinked to bridge/macvtap device with this change. o Refactor SR-IOV enable/disable code. We cannot take rtnl lock while enabling/disabling SR-IOV as VF probe will take an rtnl lock. o Disable spoofchk by default. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2014 2 次提交
-
-
由 Shahed Shaikh 提交于
Do not set netdev->real_num_tx_queues directly, let netif_set_real_num_tx_queues() take care of it. Do not overwrite netdev->num_tx_queues everytime when driver changes its Tx ring size through ethtool -L and also notify stack to update number of Rx queues. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish Chopra 提交于
o In case of non-multi TX queue mode driver does not initialize "crb_intr_mask" pointer and driver was accessing that un-initialized pointer while dumping TX queue. So dump "crb_intr_mask" only when it is initilaized. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 4月, 2014 5 次提交
-
-
由 Sucheta Chakraborty 提交于
o When the driver loads in legacy interrupt mode, only vNICs with PCI function number 0-7 are supported. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Tx interrupt coalescing parameters can now be set from VF. o Added validation code in PF to validate the parameters. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harish Patil 提交于
Signed-off-by: NHarish Patil <harish.patil@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 4月, 2014 1 次提交
-
-
由 Sony Chacko 提交于
Some firmware versions fails to reset the lock during initialization. Force reset firmware API lock during driver probe to ensure lock availability. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2014 1 次提交
-
-
由 Alexander Gordeev 提交于
Function qlcnic_setup_tss_rss_intr() might enter endless loop in case pci_enable_msix() contiguously returns a positive number of MSI-Xs that could have been allocated. Besides, the function contains 'err = -EIO;' assignment that never could be reached. This update fixes the aforementioned issues. Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Dept-HSGLinuxNICDev@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Acked-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2014 1 次提交
-
-
由 Sucheta Chakraborty 提交于
o INIT_NIC_FUNC should be first mailbox sent. Sending DCB capability and parameter query commands after that command. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2014 1 次提交
-
-
由 Shahed Shaikh 提交于
Commit 2b3d7b75("qlcnic: Add VXLAN Rx offload support") uses vxlan_get_rx_port() which caused build failure when VXLAN=m. This patch fixes the build failure by adding dependency on VXLAN in Kconfig of qlcnic module and use vxlan_get_rx_port() and support code accordingly. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 3月, 2014 2 次提交
-
-
由 Shahed Shaikh 提交于
This patch adds Rx checksum offload support for VXLAN. Implements .ndo_{add|del}_vxlan_port netdev ops. Adapter supports only one VXLAN port, so program adapter with very first UDP port which VXLAN driver is listening to. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
This patch adds LSO, LSO6 and Tx checksum offload support for VXLAN encapsulated packets on 83xx/84xx series adapters. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 2月, 2014 3 次提交
-
-
由 Rajesh Borundia 提交于
o Driver was not re-setting sds ring count to 1 after failing to allocate msi-x interrupts. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Once interrupts are enabled, instead of using module parameters, use flags (QLCNIC_MSI_ENABLED and QLCNIC_MSIX_ENABLED) set by driver to check interrupt mode. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Driver was treating -ve return value as success in case of qlcnic_enable_msi_legacy() failure Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 2月, 2014 2 次提交
-
-
由 Sucheta Chakraborty 提交于
Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2014 2 次提交
-
-
由 Alexander Gordeev 提交于
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Gordeev 提交于
Signed-off-by: NAlexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-