- 01 10月, 2006 31 次提交
-
-
由 Jens Axboe 提交于
It's ok if the read path is a lot more costly, as long as inc/dec is really cheap. The inc/dec will happen for each created/freed io context, while the reading only happens when a disk queue exits. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
It's ok if the read path is a lot more costly, as long as inc/dec is really cheap. The inc/dec will happen for each created/freed io context, while the reading only happens when a disk queue exits. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
None of the in-kernel primitives for handling "atomic" counting seem to be a good fit. We need something that is essentially free for incrementing/decrementing, while the read side may be more expensive as we only ever need to do that when a device is removed from the kernel. Use a per-cpu variable for maintaining a per-cpu ioc count and define a reading mechanism that just sums up the values. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
cfq_exit_lock is protecting two things now: - The per-ioc rbtree of cfq_io_contexts - The per-cfqd linked list of cfq_io_contexts The per-cfqd linked list can be protected by the queue lock, as it is (by definition) per cfqd as the queue lock is. The per-ioc rbtree is mainly used and updated by the process itself only. The only outside use is the io priority changing. If we move the priority changing to not browsing the rbtree, we can remove any locking from the rbtree updates and lookup completely. Let the sys_ioprio syscall just mark processes as having the iopriority changed and lazily update the private cfq io contexts the next time io is queued, and we can remove this locking as well. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
A collection of little fixes and cleanups: - We don't use the 'queued' sysfs exported attribute, since the may_queue() logic was rewritten. So kill it. - Remove dead defines. - cfq_set_active_queue() can be rewritten cleaner with else if conditions. - Several places had cfq_exit_cfqq() like logic, abstract that out and use that. - Annotate the cfqq kmem_cache_alloc() so the allocator knows that this is a repeat allocation if it fails with __GFP_WAIT set. Allows the allocator to start freeing some memory, if needed. CFQ already loops for this condition, so might as well pass the hint down. - Remove cfqd->rq_starved logic. It's not needed anymore after we dropped the crq allocation in cfq_set_request(). - Remove uneeded parameter passing. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Move some members around and unionize completion_data and rb_node since they cannot ever be used at the same time. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
- Don't assign variables that are only used once. - Kill spin_lock() prefetching, it's opportunistic at best. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
It's not needed for anything, so kill the bio passing. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
After Christophs SCSI change, the only usage left is RQ_ACTIVE and RQ_INACTIVE. The block layer sets RQ_INACTIVE right before freeing the request, so any check for RQ_INACTIVE in a driver is a bug and indicates use-after-free. So kill/clean the remaining users, straight forward. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
It is always identical to &q->rq, and we only use it for detecting whether this request came out of our mempool or not. So replace it with an additional ->flags bit flag. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
As the comments indicates in blkdev.h, we can fold it into ->end_io_data usage as that is really what ->waiting is. Fixup the users of blk_end_sync_rq(). Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
Get rid of the as_rq request type. With the added elevator_private2, we have enough room in struct request to get rid of any arq allocation/free for each request. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de>
-
由 Jens Axboe 提交于
Get rid of the cfq_rq request type. With the added elevator_private2, we have enough room in struct request to get rid of any crq allocation/free for each request. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Then we have enough room in the request to get rid of the dynamic allocations in CFQ/AS. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
There's just one flag currently (SYNC), and that one can be grabbed from the request. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
A big win, we now save an allocation/free on each request! With the previous rb/hash abstractions, we can just reuse queuelist/donelist for the FIFO data and be done with it. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
We can track this in struct request. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de>
-
由 Jens Axboe 提交于
Saves some space in arq. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de>
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
The io schedulers can use this instead of having to allocate space for it themselves. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
This removes the rbtree handling from deadline. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
This removes the rbtree handling from CFQ. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
This removes the rbtree handling from AS. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NNick Piggin <npiggin@suse.de>
-
由 Jens Axboe 提交于
The rbtree sort/lookup/reposition logic is mostly duplicated in cfq/deadline/as, so move it to the elevator core. The io schedulers still provide the actual rb root, as we don't want to impose any sort of specific handling on the schedulers. Introduce the helpers and rb_node in struct request to help migrate the IO schedulers. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
The conditions got reserved. Also make rb_next() and rb_prev() check for the empty condition. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Right now, every IO scheduler implements its own backmerging (except for noop, which does no merging). That results in duplicated code for essentially the same operation, which is never a good thing. This patch moves the backmerging out of the io schedulers and into the elevator core. We save 1.6kb of text and as a bonus get backmerging for noop as well. Win-win! Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jens Axboe 提交于
Right now ->flags is a bit of a mess: some are request types, and others are just modifiers. Clean this up by splitting it into ->cmd_type and ->cmd_flags. This allows introduction of generic Linux block message types, useful for sending generic Linux commands to block devices. Signed-off-by: NJens Axboe <axboe@suse.de>
-
由 Jean Delvare 提交于
Delay the call to adapter->client_register() until after we are certain that the client registration is a success. At this point the client is fully initialized and we no longer hold the adapter->clist mutex, so this should prevent the deadlocks if the client_register() callback needs to take that mutex too, as is the case for the bttv driver. This fixes bug #7234. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (180 commits) V4L/DVB (4641): Trivial: use lowercase letters in hex subsystem ids V4L/DVB (4639): Cx88: add autodetection for alternate revision of Leadtek PVR V4L/DVB (4638): Basic DVB-T and analog TV support for the HVR1300. V4L/DVB (4637): Add a default method for VIDIOC_G_PARM V4L/DVB (4635): Extend bttv and saa7134 to check for both AGP and PCI PCI failure case V4L/DVB (4634): Zr36120: implement pcipci checks V4L/DVB (4632): Zoran: Implement pcipci failure check V4L/DVB (4631): Av7110: remove V4L2_CAP_VBI_CAPTURE flag V4L/DVB (4630): Av7110: FW_LOADER depemdency fixed V4L/DVB (4629): Saa7134: add card support for Proteus Pro 2309 V4L/DVB (4628): Fix VIDIOC_ENUMSTD ioctl in videodev.c V4L/DVB (4627): Vivi crashes with mplayer V4L/DVB (4626): On saa7111/7113, LUMA_CTRL need a different value V4L/DVB (4624): Tvaudio: Replaced kernel_thread() with kthread_run() V4L/DVB (4622): Copy-paste bug in videodev.c V4L/DVB (4620): Fix AGC configuration for MOD3000P-based boards V4L/DVB (4619): Fixes some I2C dependencies on V4L devices V4L/DVB (4617): Problem with dibusb-mb.c USB IDs V4L/DVB (4616): [PATCH] Nebula DigiTV USB RC support V4L/DVB (4614): Export symbol saa7134_tvaudio_setmute from saa7134 for saa7134-alsa ...
-
由 Linus Torvalds 提交于
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (48 commits) ieee1394: raw1394: arm functions slept in atomic context ieee1394: sbp2: enable auto spin-up for all SBP-2 devices MAINTAINERS: updates to IEEE 1394 subsystem maintainership ieee1394: ohci1394: check for errors in suspend or resume set power state of firewire host during suspend ieee1394: ohci1394: more obvious endianess handling ieee1394: ohci1394: fix endianess bug in debug message ieee1394: sbp2: don't prefer MODE SENSE 10 ieee1394: nodemgr: grab class.subsys.rwsem in nodemgr_resume_ne ieee1394: nodemgr: fix rwsem recursion ieee1394: sbp2: more help in Kconfig ieee1394: sbp2: prevent rare deadlock in shutdown ieee1394: sbp2: update includes ieee1394: sbp2: better handling of transport errors ieee1394: sbp2: recheck node generation in sbp2_update ieee1394: sbp2: safer agent reset in error handlers ieee1394: sbp2: handle "sbp2util_node_write_no_wait failed" CONFIG_PM=n slim: drivers/ieee1394/ohci1394.c ieee1394: safer definition of empty macros video1394: add poll file operation support ...
-
由 Linus Torvalds 提交于
* 'intelfb-patches' of master.kernel.org:/pub/scm/linux/kernel/git/airlied/intelfb-2.6: intelfbhw.c: intelfbhw_get_p1p2 defined but not used intelfb: fix mtrr_reg signedness intelfb: update doc and Kconfig (supported devices) intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add preliminary i2c support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support intelfb: add vsync interrupt support
-
- 30 9月, 2006 9 次提交
-
-
git://one.firstfloor.org/home/andi/git/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] Use early clobber in semaphores [PATCH] Define vsyscall cache as blob to make clearer that user space shouldn't use it [PATCH] Re-positioning the bss segment [PATCH] Use ARRAY_SIZE in setup.c [PATCH] i386: replace intermediate array-size definitions with ARRAY_SIZE() [PATCH] x86: Clean up x86 NMI sysctls [PATCH] Refactor some duplicated code in mpparse.c [PATCH] Document iommu=panic [PATCH] Fix broken indentation in iommu_setup [PATCH] Allow disabling DAC using command line options [PATCH] Add proper sparse __user casts to __copy_to_user_inatomic [PATCH] i386: Update defconfig [PATCH] Update defconfig
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [ATM]: [lec] use refcnt to protect lec_arp_entries outside lock [ATM]: [lec] add reference counting to lec_arp entries [ATM]: [lec] use work queue instead of timer for lec arp expiry [ATM]: [lec] old_close is no longer used [ATM]: [lec] convert lec_arp_table to hlist [ATM]: [lec] header indent, comment and whitespace cleanup [ATM]: [lec] indent, comment and whitespace cleanup [continued] [ATM]: [lec] indent, comment and whitespace cleanup [SCTP]: Do not timestamp every SCTP packet. [SCTP]: Use correct mask when disabling PMTUD. [SCTP]: Include sk_buff overhead while updating the peer's receive window. [SCTP]: Enable Nagle algorithm by default. [BNX2]: Disable MSI on 5706 if AMD 8132 bridge is present. [NetLabel]: audit fixups due to delayed feedback
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chas Williams 提交于
Signed-off-by: NChas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-