- 15 7月, 2015 5 次提交
-
-
由 Sagi Grimberg 提交于
We might return res which is not initialized. Also reduce code duplication by exporting srp_parse_tmo so srp_tmo_set can reuse it. Detected by Coverity. Signed-off-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NJenny Falkovich <jennyf@mellanox.com> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Vaishali Thakkar 提交于
In little endian cases, the macro cpu_to_be{16,32,64} unfolds to __swab{16,32,64} which provides special case for constants. In big endian cases, __constant_cpu_to_be{16,32,64} and cpu_to_be{16,32,64} expand directly to the same expression. So, replace __constant_cpu_to_be{16,32,64} with cpu_to_be{16,32,64} with the goal of getting rid of the definitions of __constant_cpu_to_be{16,32,64} completely. The Coccinelle semantic patch that performs this transformation is as follows: @@expression x;@@ ( - __constant_cpu_to_be16(x) + cpu_to_be16(x) | - __constant_cpu_to_be32(x) + cpu_to_be32(x) | - __constant_cpu_to_be64(x) + cpu_to_be64(x) ) Signed-off-by: NVaishali Thakkar <vthakkar1994@gmail.com> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ira Weiny 提交于
We recently added BUG_ON's which were inappropriate for a condition which should never happen. Change these to be WARN_ON_ONCE as a debugging aid. Fixes: 4cd7c947 ('IB/mad: Add support for additional MAD info to/from drivers') Signed-off-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Ira Weiny 提交于
The define OPA_LID_PERMISSIVE is big endian and was compared to the cpu endian variable opa_drslid. Problem caught by 0-day build infrastructure. Fixes: 8e4349d1 (IB/mad: Add final OPA MAD processing) Signed-off-by: NIra Weiny <ira.weiny@intel.com> Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: NJohn, Jubin <jubin.john@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Hal Rosenstock 提交于
Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: NSean Hefty <sean.hefty@intel.com> Reviewed-By: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NIra Weiny <ira.weiny@intel.com> Tested-by: NIra Weiny <ira.weiny@intel.com> Signed-off-by: NHal Rosenstock <hal@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 13 7月, 2015 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "This update from the timer departement contains: - A series of patches which address a shortcoming in the tick broadcast code. If the broadcast device is not available or an hrtimer emulated broadcast device, some of the original assumptions lead to boot failures. I rather plugged all of the corner cases instead of only addressing the issue reported, so the change got a little larger. Has been extensivly tested on x86 and arm. - Get rid of the last holdouts using do_posix_clock_monotonic_gettime() - A regression fix for the imx clocksource driver - An update to the new state callbacks mechanism for clockevents. This is required to simplify the conversion, which will take place in 4.3" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/broadcast: Prevent NULL pointer dereference time: Get rid of do_posix_clock_monotonic_gettime cris: Replace do_posix_clock_monotonic_gettime() tick/broadcast: Unbreak CONFIG_GENERIC_CLOCKEVENTS=n build tick/broadcast: Handle spurious interrupts gracefully tick/broadcast: Check for hrtimer broadcast active early tick/broadcast: Return busy when IPI is pending tick/broadcast: Return busy if periodic mode and hrtimer broadcast tick/broadcast: Move the check for periodic mode inside state handling tick/broadcast: Prevent deep idle if no broadcast device available tick/broadcast: Make idle check independent from mode and config tick/broadcast: Sanity check the shutdown of the local clock_event tick/broadcast: Prevent hrtimer recursion clockevents: Allow set-state callbacks to be optional clocksource/imx: Define clocksource for mx27
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fix from Thomas Gleixner: "A single fix for a cpu hotplug race vs. interrupt descriptors: Prevent irq setup/teardown across the cpu starting/dying parts of cpu hotplug so that the starting/dying cpu has a stable view of the descriptor space. This has been an issue for all architectures in the cpu dying phase, where interrupts are migrated away from the dying cpu. In the starting phase its mostly a x86 issue vs the vector space update" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hotplug: Prevent alloc/free of irq descriptors during cpu up/down
-
- 12 7月, 2015 11 次提交
-
-
由 Al Viro 提交于
Normally opening a file, unlinking it and then closing will have the inode freed upon close() (provided that it's not otherwise busy and has no remaining links, of course). However, there's one case where that does *not* happen. Namely, if you open it by fhandle with cold dcache, then unlink() and close(). In normal case you get d_delete() in unlink(2) notice that dentry is busy and unhash it; on the final dput() it will be forcibly evicted from dcache, triggering iput() and inode removal. In this case, though, we end up with *two* dentries - disconnected (created by open-by-fhandle) and regular one (used by unlink()). The latter will have its reference to inode dropped just fine, but the former will not - it's considered hashed (it is on the ->s_anon list), so it will stay around until the memory pressure will finally do it in. As the result, we have the final iput() delayed indefinitely. It's trivial to reproduce - void flush_dcache(void) { system("mount -o remount,rw /"); } static char buf[20 * 1024 * 1024]; main() { int fd; union { struct file_handle f; char buf[MAX_HANDLE_SZ]; } x; int m; x.f.handle_bytes = sizeof(x); chdir("/root"); mkdir("foo", 0700); fd = open("foo/bar", O_CREAT | O_RDWR, 0600); close(fd); name_to_handle_at(AT_FDCWD, "foo/bar", &x.f, &m, 0); flush_dcache(); fd = open_by_handle_at(AT_FDCWD, &x.f, O_RDWR); unlink("foo/bar"); write(fd, buf, sizeof(buf)); system("df ."); /* 20Mb eaten */ close(fd); system("df ."); /* should've freed those 20Mb */ flush_dcache(); system("df ."); /* should be the same as #2 */ } will spit out something like Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 303843 1131 100% / Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 322023 283282 21692 93% / - inode gets freed only when dentry is finally evicted (here we trigger than by remount; normally it would've happened in response to memory pressure hell knows when). Cc: stable@vger.kernel.org # v2.6.38+; earlier ones need s/kill_it/unhash_it/ Acked-by: NJ. Bruce Fields <bfields@fieldses.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
when opening a directory we want the overlayfs inode, not one from the topmost layer. Reported-By: NAndrey Jr. Melnikov <temnota.am@gmail.com> Tested-By: NAndrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Cc: stable@vger.kernel.org # all branches Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm由 Linus Torvalds 提交于
Pull libnvdimm fixes from Dan Williams: "1) Fixes for a handful of smatch reports (Thanks Dan C.!) and minor bug fixes (patches 1-6) 2) Correctness fixes to the BLK-mode nvdimm driver (patches 7-10). Granted these are slightly large for a -rc update. They have been out for review in one form or another since the end of May and were deferred from the merge window while we settled on the "PMEM API" for the PMEM-mode nvdimm driver (ie memremap_pmem, memcpy_to_pmem, and wmb_pmem). Now that those apis are merged we implement them in the BLK driver to guarantee that mmio aperture moves stay ordered with respect to incoming read/write requests, and that writes are flushed through those mmio-windows and platform-buffers to be persistent on media. These pass the sub-system unit tests with the updates to tools/testing/nvdimm, and have received a successful build-report from the kbuild robot (468 configs). With acks from Rafael for the touches to drivers/acpi/" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: nfit: add support for NVDIMM "latch" flag nfit: update block I/O path to use PMEM API tools/testing/nvdimm: add mock acpi_nfit_flush_address entries to nfit_test tools/testing/nvdimm: fix return code for unimplemented commands tools/testing/nvdimm: mock ioremap_wt pmem: add maintainer for include/linux/pmem.h nfit: fix smatch "use after null check" report nvdimm: Fix return value of nvdimm_bus_init() if class_create() fails libnvdimm: smatch cleanups in __nd_ioctl sparse: fix misplaced __pmem definition
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux由 Linus Torvalds 提交于
Pull i2c fixes from Wolfram Sang: "Mostly slight adjusments for new drivers, but also one core fix for which finally the dependencies are now available as well" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: Mark instantiated device nodes with OF_POPULATE i2c: jz4780: Fix return value if probe fails i2c: xgene-slimpro: Fix missing mbox_free_channel call in probe error path i2c: I2C_MT65XX should depend on HAS_DMA
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input fixes from Dmitry Torokhov: "A fix (revert) for a recent regression in Synaptics driver and a fix for Elan i2c touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - allocate 3 slots to keep stability in image sensors" Input: elan_i2c - change the hover event from MT to ST
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux由 Linus Torvalds 提交于
Pull clk fixes from Stephen Boyd: "A small set of fixes for problems found by smatch in new drivers that we added this rc and a handful of driver fixes that came in during the merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: drivers: clk: st: Incorrect register offset used for lock_status clk: mediatek: mt8173: Fix enabling of critical clocks drivers: clk: st: Fix mux bit-setting for Cortex A9 clocks drivers: clk: st: Add CLK_GET_RATE_NOCACHE flag to clocks drivers: clk: st: Fix flexgen lock init drivers: clk: st: Fix FSYN channel values drivers: clk: st: Remove unused code clk: qcom: Use parent rate when set rate to pixel RCG clock clk: at91: do not leak resources clk: stm32: Fix out-by-one error path in the index lookup clk: iproc: fix bit manipulation arithmetic clk: iproc: fix memory leak from clock name
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "A bunch of fixes for radeon, intel, omap and one amdkfd fix. Radeon fixes are all over, but it does fix some cursor corruption across suspend/resume. i915 should fix the second warn you were seeing, so let us know if not. omap is a bunch of small fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/radeon: disable vce init on cayman (v2) drm/amdgpu: fix timeout calculation drm/radeon: check if BO_VA is set before adding it to the invalidation list drm/radeon: allways add the VM clear duplicate Revert "Revert "drm/radeon: dont switch vt on suspend"" drm/radeon: Fold radeon_set_cursor() into radeon_show_cursor() drm/radeon: unpin cursor BOs on suspend and pin them again on resume (v2) drm/radeon: Clean up reference counting and pinning of the cursor BOs drm/amdkfd: validate pdd where it acquired first Revert "drm/i915: Allocate context objects from stolen" drm/i915: Declare the swizzling unknown for L-shaped configurations drm/radeon: fix underflow in r600_cp_dispatch_texture() drm/radeon: default to 2048 MB GART size on SI+ drm/radeon: fix HDP flushing drm/radeon: use RCU query for GEM_BUSY syscall drm/amdgpu: Handle irqs only based on irq ring, not irq status regs. drm/radeon: Handle irqs only based on irq ring, not irq status regs. drm/i915: Use crtc_state->active in primary check_plane func drm/i915: Check crtc->active in intel_crtc_disable_planes drm/i915: Restore all GGTT VMAs on resume ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull selinux fixes from James Morris. * 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: selinux: fix mprotect PROT_EXEC regression caused by mm change selinux: don't waste ebitmap space when importing NetLabel categories
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "This is an assortment of fixes. Most of the commits are from Filipe (fsync, the inode allocation cache and a few others). Mark kicked in a series fixing corners in the extent sharing ioctls, and everyone else fixed up on assorted other problems" * 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix wrong check for btrfs_force_chunk_alloc() Btrfs: fix warning of bytes_may_use Btrfs: fix hang when failing to submit bio of directIO Btrfs: fix a comment in inode.c:evict_inode_truncate_pages() Btrfs: fix memory corruption on failure to submit bio for direct IO btrfs: don't update mtime/ctime on deduped inodes btrfs: allow dedupe of same inode btrfs: fix deadlock with extent-same and readpage btrfs: pass unaligned length to btrfs_cmp_data() Btrfs: fix fsync after truncate when no_holes feature is enabled Btrfs: fix fsync xattr loss in the fast fsync path Btrfs: fix fsync data loss after append write Btrfs: fix crash on close_ctree() if cleaner starts new transaction Btrfs: fix race between caching kthread and returning inode to inode cache Btrfs: use kmem_cache_free when freeing entry in inode cache Btrfs: fix race between balance and unused block group deletion btrfs: add error handling for scrub_workers_get() btrfs: cleanup noused initialization of dev in btrfs_end_bio() btrfs: qgroup: allow user to clear the limitation on qgroup
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
Pull ARM SoC fixes from Kevin Hilman: "A fairly random colletion of fixes based on -rc1 for OMAP, sunxi and prima2 as well as a few arm64-specific DT fixes. This series also includes a late to support a new Allwinner (sunxi) SoC, but since it's rather simple and isolated to the platform-specific code, it's included it for this -rc" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG arm: dts: vexpress: add missing CCI PMU device node to TC2 arm: dts: vexpress: describe all PMUs in TC2 dts GICv3: Add ITS entry to THUNDER dts arm64: dts: Add poweroff button device node for APM X-Gene platform ARM: dts: am4372.dtsi: disable rfbi ARM: dts: am57xx-beagle-x15: Provide supply for usb2_phy2 ARM: dts: am4372: Add emif node Revert "ARM: dts: am335x-boneblack: disable RTC-only sleep" ARM: sunxi: Enable simplefb in the defconfig ARM: Remove deprecated symbol from defconfig files ARM: sunxi: Add Machine support for A33 ARM: sunxi: Introduce Allwinner H3 support Documentation: sunxi: Update Allwinner SoC documentation ARM: prima2: move to use REGMAP APIs for rtciobrg ARM: dts: atlas7: add pinctrl and gpio descriptions ARM: OMAP2+: Remove unnessary return statement from the void function, omap2_show_dma_caps memory: omap-gpmc: Fix parsing of devices
-
- 11 7月, 2015 15 次提交
-
-
由 Thomas Gleixner 提交于
Dan reported that the recent changes to the broadcast code introduced a potential NULL dereference. Add the proper check. Fixes: e0454311 "tick/broadcast: Sanity check the shutdown of the local clock_event" Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc fixes from Helge Deller: "We have one important patch from Dave Anglin and myself which fixes PTE/TLB race conditions which caused random segmentation faults on our debian buildd servers, and one patch from Alex Ivanov which speeds up the graphical text console on the STI framebuffer driver" * 'parisc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix some PTE/TLB race conditions and optimize __flush_tlb_range based on timing results stifb: Implement hardware accelerated copyarea
-
-
由 Stephen Smalley 提交于
commit 66fc1303 ("mm: shmem_zero_setup skip security check and lockdep conflict with XFS") caused a regression for SELinux by disabling any SELinux checking of mprotect PROT_EXEC on shared anonymous mappings. However, even before that regression, the checking on such mprotect PROT_EXEC calls was inconsistent with the checking on a mmap PROT_EXEC call for a shared anonymous mapping. On a mmap, the security hook is passed a NULL file and knows it is dealing with an anonymous mapping and therefore applies an execmem check and no file checks. On a mprotect, the security hook is passed a vma with a non-NULL vm_file (as this was set from the internally-created shmem file during mmap) and therefore applies the file-based execute check and no execmem check. Since the aforementioned commit now marks the shmem zero inode with the S_PRIVATE flag, the file checks are disabled and we have no checking at all on mprotect PROT_EXEC. Add a test to the mprotect hook logic for such private inodes, and apply an execmem check in that case. This makes the mmap and mprotect checking consistent for shared anonymous mappings, as well as for /dev/zero and ashmem. Cc: <stable@vger.kernel.org> # 4.1.x Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NPaul Moore <pmoore@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes and clean-up from Catalin Marinas: - ACPI fix when checking the validity of the GICC MADT subtable - handle debug exceptions in the el*_inv exception entries - remove pointless register assignment in two compat syscall wrappers - unnecessary include path - defconfig update * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: entry32: remove pointless register assignment arm64: entry: handle debug exceptions in el*_inv arm64: Keep the ARM64 Kconfig selects sorted ACPI / ARM64 : use the new BAD_MADT_GICC_ENTRY macro ACPI / ARM64: add BAD_MADT_GICC_ENTRY() macro arm64: defconfig: Add Ceva ahci to the defconfig arm64: remove another unnecessary libfdt include path
-
由 John David Anglin 提交于
The increased use of pdtlb/pitlb instructions seemed to increase the frequency of random segmentation faults building packages. Further, we had a number of cases where TLB inserts would repeatedly fail and all forward progress would stop. The Haskell ghc package caused a lot of trouble in this area. The final indication of a race in pte handling was this syslog entry on sibaris (C8000): swap_free: Unused swap offset entry 00000004 BUG: Bad page map in process mysqld pte:00000100 pmd:019bbec5 addr:00000000ec464000 vm_flags:00100073 anon_vma:0000000221023828 mapping: (null) index:ec464 CPU: 1 PID: 9176 Comm: mysqld Not tainted 4.0.0-2-parisc64-smp #1 Debian 4.0.5-1 Backtrace: [<0000000040173eb0>] show_stack+0x20/0x38 [<0000000040444424>] dump_stack+0x9c/0x110 [<00000000402a0d38>] print_bad_pte+0x1a8/0x278 [<00000000402a28b8>] unmap_single_vma+0x3d8/0x770 [<00000000402a4090>] zap_page_range+0xf0/0x198 [<00000000402ba2a4>] SyS_madvise+0x404/0x8c0 Note that the pte value is 0 except for the accessed bit 0x100. This bit shouldn't be set without the present bit. It should be noted that the madvise system call is probably a trigger for many of the random segmentation faults. In looking at the kernel code, I found the following problems: 1) The pte_clear define didn't take TLB lock when clearing a pte. 2) We didn't test pte present bit inside lock in exception support. 3) The pte and tlb locks needed to merged in order to ensure consistency between page table and TLB. This also has the effect of serializing TLB broadcasts on SMP systems. The attached change implements the above and a few other tweaks to try to improve performance. Based on the timing code, TLB purges are very slow (e.g., ~ 209 cycles per page on rp3440). Thus, I think it beneficial to test the split_tlb variable to avoid duplicate purges. Probably, all PA 2.0 machines have combined TLBs. I dropped using __flush_tlb_range in flush_tlb_mm as I realized all applications and most threads have a stack size that is too large to make this useful. I added some comments to this effect. Since implementing 1 through 3, I haven't had any random segmentation faults on mx3210 (rp3440) in about one week of building code and running as a Debian buildd. Signed-off-by: NJohn David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: NHelge Deller <deller@gmx.de>
-
由 Alex Ivanov 提交于
This patch adds hardware assisted scrolling. The code is based upon the following investigation: https://parisc.wiki.kernel.org/index.php/NGLE#Blitter A simple 'time ls -la /usr/bin' test shows 1.6x speed increase over soft copy and 2.3x increase over FBINFO_READS_FAST (prefer soft copy over screen redraw) on Artist framebuffer. Signed-off-by: NAlex Ivanov <lausgans@gmail.com> Signed-off-by: NHelge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: - opal-prd mmap fix from Vaidy - set kernel taint for MCEs from Daniel - alignment exception description from Anton - ppc4xx_hsta_msi build fix from Daniel - opal-elog interrupt fix from Alistair - core_idle_state race fix from Shreyas - hv-24x7 lockdep fix from Sukadev - multiple cxl fixes from Daniel, Ian, Mikey & Maninder - update MAINTAINERS to point at shared tree * tag 'powerpc-4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: cxl: Check if afu is not null in cxl_slbia powerpc: Update MAINTAINERS to point at shared tree powerpc/perf/24x7: Fix lockdep warning cxl: Fix off by one error allowing subsequent mmap page to be accessed cxl: Fail mmap if requested mapping is larger than assigned problem state area cxl: Fix refcounting in kernel API powerpc/powernv: Fix race in updating core_idle_state powerpc/powernv: Fix opal-elog interrupt handler powerpc/ppc4xx_hsta_msi: Include ppc-pci.h to fix reference to hose_list powerpc: Add plain English description for alignment exception oopses cxl: Test the correct mmio space before unmapping powerpc: Set the correct kernel taint on machine check errors cxl/vphb.c: Use phb pointer after NULL check powerpc/powernv: Fix vma page prot flags in opal-prd driver
-
由 Ross Zwisler 提交于
Add support in the NFIT BLK I/O path for the "latch" flag defined in the "Get Block NVDIMM Flags" _DSM function: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf This flag requires the driver to read back the command register after it is written in the block I/O path. This ensures that the hardware has fully processed the new command and moved the aperture appropriately. Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Ross Zwisler 提交于
Update the nfit block I/O path to use the new PMEM API and to adhere to the read/write flows outlined in the "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf This includes adding support for targeted NVDIMM flushes called "flush hints" in the ACPI 6.0 specification: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf For performance and media durability the mapping for a BLK aperture is moved to a write-combining mapping which is consistent with memcpy_to_pmem() and wmb_blk(). Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
In preparation for fixing the BLK path to properly use "directed pcommit" enable the unit test infrastructure to emit mock "flush" tables. Writes to these flush addresses trigger a memory controller to flush its internal buffers to persistent media, similar to the x86 "pcommit" instruction. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
The implementation for the new "DIMM Flags" DSM relies on the -ENOTTY return code to indicate that the flags are unimplimented and to fall back to a safe default. As is the -ENXIO error code erroneoously indicates to fail enabling a BLK region. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dan Williams 提交于
In the 4.2-rc1 merge the default_memremap_pmem() implementation switched from ioremap_nocache() to ioremap_wt(). Add it to the list of mocked routines to restore the ability to run the unit tests. Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Ross Zwisler 提交于
The file include/linux/pmem.h was recently created to hold the PMEM API, and is logically part of the PMEM driver. Add an entry for this file to MAINTAINERS. Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: NDan Williams <dan.j.williams@intel.com>
-
由 Dmitry Torokhov 提交于
This reverts commit 63c4fda3 as it causes issues with detecting 3-finger taps. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100481 Cc: stable@vger.kernel.org Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
-
- 10 7月, 2015 2 次提交
-
-
由 Mark Rutland 提交于
We currently set x27 in compat_sys_sigreturn_wrapper and compat_sys_rt_sigreturn_wrapper, similarly to what we do with r8/why on 32-bit ARM, in an attempt to prevent sigreturns from being restarted. However, on arm64 we have always used pt_regs::syscallno for syscall restarting (for both native and compat tasks), and x27 is never inspected again before being overwritten in kernel_exit. This patch removes the pointless register assignments. Signed-off-by: NMark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Ralf Baechle 提交于
We were using the native syscall and that results in subtle breakage. This is the same issue as fixed in 077d0e65 (MIPS: N32: Use compat getsockopt syscall) but that commit did fix it only for N32. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Link: https://bugzilla.kernel.org/show_bug.cgi?id=100291
-