- 02 5月, 2017 40 次提交
-
-
由 Oleksandr Andrushchenko 提交于
Add ABI for the two halves of a para-virtualized sound driver to communicate with each other. The ABI allows implementing audio playback and capture as well as volume control and possibility to mute/unmute audio sources. Note: depending on the use-case backend can expose more sound cards and PCM devices/streams than the underlying HW physically has by employing SW mixers, configuring virtual sound streams, channels etc. Thus, allowing fine tunned configurations per frontend. Signed-off-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Signed-off-by: NOleksandr Grytsov <oleksandr_grytsov@epam.com> Signed-off-by: NOleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com> Signed-off-by: NIurii Konovalenko <iurii.konovalenko@globallogic.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Oleksandr Andrushchenko 提交于
Multi-touch fields re-use the page that is used by the other features which means that you can interleave multi-touch, motion, and key events. Signed-off-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Oleksandr Andrushchenko 提交于
The patch clarifies the protocol that is used by the PV keyboard drivers. Signed-off-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
This patch adds a Kconfig option and Makefile support for building the 9pfs Xen driver. CC: groug@kaod.org CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Upon receiving a notification from the backend, schedule the p9_xen_response work_struct. p9_xen_response checks if any responses are available, if so, it reads them one by one, calling p9_client_cb to send them up to the 9p layer (p9_client_cb completes the request). Handle the ring following the Xen 9pfs specification. CC: groug@kaod.org CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Implement struct p9_trans_module create and close functions by looking at the available Xen 9pfs frontend-backend connections. We don't expect many frontend-backend connections, thus walking a list is OK. Send requests to the backend by copying each request to one of the available rings (each frontend-backend connection comes with multiple rings). Handle the ring and notifications following the 9pfs specification. If there are not enough free bytes on the ring for the request, wait on the wait_queue: the backend will send a notification after consuming more requests. CC: groug@kaod.org CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Implement functions to handle the xenbus handshake. Upon connection, allocate the rings according to the protocol specification. Initialize a work_struct and a wait_queue. The work_struct will be used to schedule work upon receiving an event channel notification from the backend. The wait_queue will be used to wait when the ring is full and we need to send a new request. CC: groug@kaod.org CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Introduce the Xen 9pfs transport driver: add struct xenbus_driver to register as a xenbus driver and add struct p9_trans_module to register as v9fs driver. All functions are empty stubs for now. CC: groug@kaod.org CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Reviewed-by: NBoris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
It uses the new ring.h macros to declare rings and interfaces. CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: groug@kaod.org Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Stefano Stabellini 提交于
Sync the ring.h file with upstream Xen, to introduce the new ring macros. They will be used by the Xen transport for 9pfs. CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: groug@kaod.org Signed-off-by: NStefano Stabellini <stefano@aporeto.com> Acked-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Juergen Gross 提交于
xen_call_function_interrupt() isn't used in smp_pv.c. Remove it. Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
After code split between PV and HVM some functions in xen_smp_ops have xen_pv_ prefix and some only xen_ which makes them look like they're common for both PV and HVM while they're not. Rename all the rest to have xen_pv_ prefix. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Now everything is in place and we can move PV-only code under CONFIG_XEN_PV. CONFIG_XEN_PV_SMP is created to support the change. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
xen_create_contiguous_region()/xen_create_contiguous_region() are PV-only, they both contain xen_feature(XENFEAT_auto_translated_physmap) check and bail in the very beginning. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Balloon driver uses several PV-only concepts (xen_start_info, xen_extra_mem,..) and it seems the simpliest solution to make HVM-only build happy is to decorate these parts with #ifdefs. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
__pfn_to_mfn() is only used from PV code (mmu_pv.c, p2m.c) and from page.h where all functions calling it check for xen_feature(XENFEAT_auto_translated_physmap) first so we can replace it with any stub to make build happy. set_foreign_p2m_mapping()/clear_foreign_p2m_mapping() are used from grant-table.c but only if !xen_feature(XENFEAT_auto_translated_physmap). Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
startup_xen references PV-only code, decorate it with #ifdef CONFIG_XEN_PV to make PV-free builds possible. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
xen_pmu_init/finish() functions are used in suspend.c and enlighten.c, add stubs for now. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Slit the code in suspend.c into suspend_pv.c and suspend_hvm.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Basically, mmu.c is renamed to mmu_pv.c and some code moved out to common mmu.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Move PVHVM related code to mmu_hvm.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Basically, smp.c is renamed to smp_pv.c and some code moved out to common smp.c. struct xen_common_irq delcaration ended up in smp.h. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Move PVHVM related code to smp_hvm.c. Drop 'static' qualifier from xen_smp_send_reschedule(), xen_smp_send_call_function_ipi(), xen_smp_send_call_function_single_ipi(), these functions will be moved to common smp code when smp_pv.c is split. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Split xen_cpu_die() into xen_pv_cpu_die() and xen_hvm_cpu_die() to support further splitting of smp.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Split xen_smp_prepare_boot_cpu() into xen_pv_smp_prepare_boot_cpu() and xen_hvm_smp_prepare_boot_cpu() to support further splitting of smp.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
xen_smp_intr_init() and xen_smp_intr_free() have PV-specific code and as a praparatory change to splitting smp.c we need to split these fucntions. Create xen_smp_intr_init_pv()/xen_smp_intr_free_pv(). Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Basically, enlighten.c is renamed to enlighten_pv.c and some code moved out to common enlighten.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Move PVHVM related code to enlighten_hvm.c. Three functions: xen_cpuhp_setup(), xen_reboot(), xen_emergency_restart() are shared, drop static qualifier from them. These functions will go to common code once it is split from enlighten.c. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
Create enlighten_pvh.c by splitting off PVH related code from enlighten.c, put it under CONFIG_XEN_PVH. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
All code to support Xen PV will get under this new option. For the beginning, check for it in the common code. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
have_vcpu_info_placement applies to both PV and HVM and as we're going to split the code we need to make it global. Rename to xen_have_vcpu_info_placement. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
由 Vitaly Kuznetsov 提交于
As a preparation to splitting the code we need to untangle it: x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv xen_platform() -> xen_platform_hvm() and xen_platform_pv() xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm() xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm() Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant xen_pv_domain() check can be dropped. Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NJuergen Gross <jgross@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 mm updates from Ingo Molnar: "The main x86 MM changes in this cycle were: - continued native kernel PCID support preparation patches to the TLB flushing code (Andy Lutomirski) - various fixes related to 32-bit compat syscall returning address over 4Gb in applications, launched from 64-bit binaries - motivated by C/R frameworks such as Virtuozzo. (Dmitry Safonov) - continued Intel 5-level paging enablement: in particular the conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov) - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel) - ... plus misc updates, fixes and cleanups" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash x86/mm: Fix flush_tlb_page() on Xen x86/mm: Make flush_tlb_mm_range() more predictable x86/mm: Remove flush_tlb() and flush_tlb_current_task() x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly() x86/mm/64: Fix crash in remove_pagetable() Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation" x86/boot/e820: Remove a redundant self assignment x86/mm: Fix dump pagetables for 4 levels of page tables x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()" x86/espfix: Add support for 5-level paging x86/kasan: Extend KASAN to support 5-level paging x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y x86/paravirt: Add 5-level support to the paravirt code x86/mm: Define virtual memory map for 5-level paging x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert x86/boot: Detect 5-level paging support x86/mm/numa: Remove numa_nodemask_from_meminfo() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 vdso updates from Ingo Molnar: "Add support for vDSO acceleration of the "Hyper-V TSC page", to speed up clock reading on Hyper-V guests" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method x86/hyperv: Move TSC reading method to asm/mshyperv.h x86/hyperv: Implement hv_get_tsc_page()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 platform updates from Ingo Molnar: "Most of the commits are continued SGI UV4 hardware-enablement changes, plus there's also new Bluetooth support for the Intel Edison platform" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/intel-mid: Enable Bluetooth support on Intel Edison x86/platform/uv/BAU: Implement uv4_wait_completion with read_status x86/platform/uv/BAU: Add wait_completion to bau_operations x86/platform/uv/BAU: Add status mmr location fields to bau_control x86/platform/uv/BAU: Cleanup bau_operations declaration and instances x86/platform/uv/BAU: Add payload descriptor qualifier x86/platform/uv/BAU: Add uv_bau_version enumerated constants
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 irq update from Ingo Molnar: "A single commit that micro-optimizes an IRQ vectors code path in the CPU offlining code" * 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Optimize free vector check in the CPU offline path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 debug updates from Ingo Molnar: "The biggest update is the addition of USB3 debug port based early-console. Greg was fine with the USB changes and with the routing of these patches: https://www.spinics.net/lists/linux-usb/msg155093.html" * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: usb/doc: Add document for USB3 debug port usage usb/serial: Add DBC debug device support to usb_debug x86/earlyprintk: Add support for earlyprintk via USB3 debug port usb/early: Add driver for xhci debug capability x86/timers: Add simple udelay calibration
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 cleanups from Ingo Molnar: "A handful of small cleanups" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Remove a redundant #ifdef directive x86/smp: Remove the redundant #ifdef CONFIG_SMP directive x86/smp: Reduce code duplication x86/pci-calgary: Use setup_timer() instead of open coding it.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 build update from Ingo Molnar: "A single CLang support related fix" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kbuild: Use cc-option to enable -falign-{jumps/loops}
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 asm updates from Ingo Molnar: "The main changes in this cycle were: - unwinder fixes and enhancements - improve ftrace interaction with the unwinder - optimize the code footprint of WARN() and related debugging constructs - ... plus misc updates, cleanups and fixes" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/unwind: Dump all stacks in unwind_dump() x86/unwind: Silence more entry-code related warnings x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder x86/unwind: Remove unused 'sp' parameter in unwind_dump() x86/unwind: Prepend hex mask value with '0x' in unwind_dump() x86/unwind: Properly zero-pad 32-bit values in unwind_dump() x86/unwind: Ensure stack pointer is aligned debug: Avoid setting BUGFLAG_WARNING twice x86/unwind: Silence entry-related warnings x86/unwind: Read stack return address in update_stack_state() x86/unwind: Move common code into update_stack_state() debug: Fix __bug_table[] in arch linker scripts debug: Add _ONCE() logic to report_bug() x86/debug: Define BUG() again for !CONFIG_BUG x86/debug: Implement __WARN() using UD0 x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set x86/ftrace: Clean up ftrace_regs_caller x86/ftrace: Add stack frame pointer to ftrace_caller x86/ftrace: Move the ftrace specific code out of entry_32.S ...
-