These pernet_operations create and destroy net::ipv6.icmp_sk
socket, used to send ICMP or error reply.

Nobody can dereference the socket to handle a packet before
net is initialized, as there is no routing; nobody can do
that in parallel with exit, as all of devices are moved
to init_net or destroyed and there are no packets it-flight.
So, it's possible to mark these pernet_operations as async.

The same for ndisc_net_ops and for igmp6_net_ops. The last
one also creates and destroys /proc entries.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These pernet_operations create and destroy /proc entries,
populate and depopulate net::rules_ops and multiroute table.
All the structures are pernet, and they are not touched
by foreign net pernet_operations. So, it's possible to mark
them async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch finishes converting pernet_operations
registered in net/wireless directory.

These pernet_operations have only exit method,
which moves devices to init_net. This action
is not pernet_operations-specific, and function
cfg80211_switch_netns() may be called all time
during the system life. All necessary protection
against concurrent cfg80211_pernet_exit() is made
by rtnl_lock(). So, cfg80211_pernet_ops is able
to be marked as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

init method initializes sysctl defaults, allocates
percpu arrays and creates /proc entries.
exit method reverts the above.

There are no pernet_operations, which are interested
in the above entities of foreign net namespace, so
inet6_net_ops are able to be marked as async.
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ADVERTISED_Asym_Pause bit was being improperly set when both
rx and tx pause were enabled. When rx and tx are both enabled, only
the ADVERTISED_Pause bit is supposed to be set.
Signed-off-by: NJake Moroni <mail@jakemoroni.com>
Acked-by: NMadalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The *while* loop in this function  can be turned into a normal *for* loop.
And getting rid  of the  single return point saves us a few more LoCs...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Martin Blumenstingl says:

====================
dwmac-meson8b: small cleanup

This is a follow-up to my previous series "dwmac-meson8b: clock fixes for
Meson8b" from [0].
during the review of that series it was found that the clock registration
could be simplified. now that the previous series has landed we can start
cleaning up the clock registration.

the goal of this series is to simplify the code in the dwmac-meson8b
driver. no functional changes are intended.

I have tested this on my Khadas VIM2 (GXM SoC, with RGMII PHY) and my
Endless Mini (EC-100, Meson8b SoC with RMII PHY, .dts support is not part
of mainline yet). no problems were found.

[0] http://lists.infradead.org/pipermail/linux-amlogic/2018-January/006143.html
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The common clock framework needs access to the "clock configuration"
structs during runtime.
However, only the common clock framework should access these. Ensure
this by moving the configuration structs out of struct meson8b_dwmac,
so only meson8b_init_rgmii_tx_clk() and the common clock framework know
about these configurations.
Suggested-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Nothing in the dwmac-meson8b driver (except .probe itself) requires the
platform_device anymore after .probe has finished. Replace it with a
pointer to struct device since this is what the functions inside the
driver are actually accessing.
No functional changes.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To goal of this patch is to simplify the registration of the RGMII TX
clock (and it's parent clocks). This is achieved by:
- introducing the meson8b_dwmac_register_clk helper-function to remove
  code duplication when registering a single clock (this saves a few
  lines since we have 4 clocks internally)
- using devm_add_action_or_reset to disable the RGMII TX clock
  automatically when needed. This also allows us to re-use the standard
  stmmac_pltfr_remove function.
- devm_kasprintf() and devm_kstrdup() are not used anymore to generate
  the clock name (these are replaced by a variable on the stack) because
  the common clock framework already uses kstrdup() internally.

No functional changes intended.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: NJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

_port_ is already known to be a valid index in the callers [1]. So
these checks are unnecessary.

[1] https://lkml.org/lkml/2018/2/16/469

Addresses-Coverity-ID: 1465287
Addresses-Coverity-ID: 1465291
Suggested-by: NRichard Cochran <richardcochran@gmail.com>
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because READ_ONCE() now implies smp_read_barrier_depends(), the
smp_read_barrier_depends() in __ptr_ring_consume() is redundant;
this commit removes it and updates the comments.
Signed-off-by: NAndrea Parri <parri.andrea@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <linux-kernel@vger.kernel.org>
Cc: <netdev@vger.kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings
if the index is actually set in the message.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The shifting of timehi by 16 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an u64. If the top bit
of timehi is set then all then all the upper bits of ns end up as also
being set because of the sign-extension. Fix this by making timehi and
timelo u64.  Also move the declaration of ns.

Detected by CoverityScan, CID#1465288 ("Unintended sign extension")

Fixes: c6fe0ad2 ("net: dsa: mv88e6xxx: add rx/tx timestamping support")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow for changing the MTU within the limit of the maximum size of a
descriptor (2048 bytes). Add the callback to change MTU from user-space
and take the configurable MTU into account when configuring the
hardware.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
nfp: whitespace sync and flower TCP flags

Whitespace cleanup from Michael and flower offload support for matching
on TCP flags from Pieter.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Implement tcp flag match offloading. Current tcp flag match support include
FIN, SYN, RST, PSH and URG flags, other flags are unsupported. The PSH and
URG flags are only set in the hardware fast path when used in combination
with the SYN, RST and PSH flags.
Signed-off-by: NPieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: NJohn Hurley <john.hurley@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nfp_net_ctrl.h file used spaces for indentation in the past but
tabs have crept in.  Host driver files use tabs for indentation by
default, so let's convert to tabs for consistency across the file
and our drivers.
Signed-off-by: NMichael Rapson <michael.rapson@netronome.com>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Aring says:

====================
net: sched: act: add extack support

this patch series adds extack support for the TC action subsystem.
As example I for the extack support in a TC action I choosed mirred
action.

- Alex

Cc: David Ahern <dsahern@gmail.com>

changes since v3:
- adapt recommended changes from Davide Caratti, please check if
  I catch everything. Thanks.

changes since v2:

- remove newline in extack of generic walker handling
  Thanks to Davide Caratti
- add kernel@mojatatu.com in cc
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack support for TC mirred action.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack handling for a common used TC act function
"tcf_generic_walker()" to add an extack message on failures.
The tcf_generic_walker() function can fail if get a invalid command
different than DEL and GET. The naming "action" here is wrong, the
correct naming would be command.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack support for act walker callback api. This
prepares to handle extack support inside each specific act
implementation.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack support for act lookup callback api. This
prepares to handle extack support inside each specific act
implementation.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack support for act init callback api. This
prepares to handle extack support inside each specific act
implementation.

Based on work by David Ahern <dsahern@gmail.com>

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack support for generic act handling. The extack
will be set deeper to each called function which is not part of netdev
core api.

Based on work by David Ahern <dsahern@gmail.com>

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack to tcf_action_init and tcf_action_init_1
functions. These are necessary to make individual extack handling in
each act implementation.

Based on work by David Ahern <dsahern@gmail.com>

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is used by subsequent patches. It fixes code style issues
caught by checkpatch.
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sowmini Varadhan says:

====================
RDS: zerocopy support

This is version 3 of the series, following up on review comments for
 http://patchwork.ozlabs.org/project/netdev/list/?series=28530

Review comments addressed
Patch 4
  - fix fragile use of skb->cb[], do not set ee_code incorrectly.
Patch 5:
  - remove needless bzero of skb->cb[], consolidate err cleanup

A brief overview of this feature follows.

This patch series provides support for MSG_ZERCOCOPY
on a PF_RDS socket based on the APIs and infrastructure added
by Commit f214f915 ("tcp: enable MSG_ZEROCOPY")

For single threaded rds-stress testing using rds-tcp with the
ixgbe driver using 1M message sizes (-a 1M -q 1M) preliminary
results show that  there is a significant reduction in latency: about
90 usec with zerocopy, compared with 200 usec without zerocopy.

This patchset modifies the above for zerocopy in the following manner.
- if the MSG_ZEROCOPY flag is specified with rds_sendmsg(), and,
- if the SO_ZEROCOPY  socket option has been set on the PF_RDS socket,
application pages sent down with rds_sendmsg are pinned. The pinning
uses the accounting infrastructure added by a91dbff5 ("sock: ulimit
on MSG_ZEROCOPY pages"). The message is unpinned when all references
to the message go down to 0, and the message is freed by rds_message_purge.

A multithreaded application using this infrastructure must send down
a unique 32 bit cookie as ancillary data with each sendmsg invocation.
The format of this ancillary data is described in Patch 5 of the series.
The cookie is passed up to the application on the sk_error_queue when
the message is unpinned, indicating to the application that it is now
safe to free/reuse the message buffer. The details of the completion
notification are provided in Patch 4 of this series.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Send a cookie with sendmsg() on PF_RDS sockets, and process the
returned batched cookies in do_recv_completion()
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for basic PF_RDS client-server testing in msg_zerocopy
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the MSG_ZEROCOPY flag is specified with rds_sendmsg(), and,
if the SO_ZEROCOPY socket option has been set on the PF_RDS socket,
application pages sent down with rds_sendmsg() are pinned.

The pinning uses the accounting infrastructure added by
Commit a91dbff5 ("sock: ulimit on MSG_ZEROCOPY pages")

The payload bytes in the message may not be modified for the
duration that the message has been pinned. A multi-threaded
application using this infrastructure may thus need to be notified
about send-completion so that it can free/reuse the buffers
passed to rds_sendmsg(). Notification of send-completion will
identify each message-buffer by a cookie that the application
must specify as ancillary data to rds_sendmsg().
The ancillary data in this case has cmsg_level == SOL_RDS
and cmsg_type == RDS_CMSG_ZCOPY_COOKIE.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS removes a datagram (rds_message) from the retransmit queue when
an ACK is received. The ACK indicates that the receiver has queued
the RDS datagram, so that the sender can safely forget the datagram.
When all references to the rds_message are quiesced, rds_message_purge
is called to release resources used by the rds_message

If the datagram to be removed had pinned pages set up, add
an entry to the rs->rs_znotify_queue so that the notifcation
will be sent up via rds_rm_zerocopy_callback() when the
rds_message is eventually freed by rds_message_purge.

rds_rm_zerocopy_callback() attempts to batch the number of cookies
sent with each notification  to a max of SO_EE_ORIGIN_MAX_ZCOOKIES.
This is achieved by checking the tail skb in the sk_error_queue:
if this has room for one more cookie, the cookie from the
current notification is added; else a new skb is added to the
sk_error_queue. Every invocation of rds_rm_zerocopy_callback() will
trigger a ->sk_error_report to notify the application.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

allow the application to set SO_ZEROCOPY on the underlying sk
of a PF_RDS socket
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The existing model holds a reference from the rds_sock to the
rds_message, but the rds_message does not itself hold a sock_put()
on the rds_sock. Instead the m_rs field in the rds_message is
assigned when the message is queued on the sock, and nulled when
the message is dequeued from the sock.

We want to be able to notify userspace when the rds_message
is actually freed (from rds_message_purge(), after the refcounts
to the rds_message go to 0). At the time that rds_message_purge()
is called, the message is no longer on the rds_sock retransmit
queue. Thus the explicit reference for the m_rs is needed to
send a notification that will signal to userspace that
it is now safe to free/reuse any pages that may have
been pinned down for zerocopy.

This patch manages the m_rs assignment in the rds_message with
the necessary refcount book-keeping.
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RDS would like to use the helper functions for managing pinned pages
added by Commit a91dbff5 ("sock: ulimit on MSG_ZEROCOPY pages")
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was mis-applied and the changes had rejects.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexander Aring says:

====================
net: sched: act: add extack support

this patch series adds extack support for the TC action subsystem.
As example I for the extack support in a TC action I choosed mirred
action.

- Alex

Cc: David Ahern <dsahern@gmail.com>

changes since v3:
- adapt recommended changes from Davide Caratti, please check if
  I catch everything. Thanks.

changes since v2:

- remove newline in extack of generic walker handling
  Thanks to Davide Caratti
- add kernel@mojatatu.com in cc
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds extack to tcf_action_init and tcf_action_init_1
functions. These are necessary to make individual extack handling in
each act implementation.

Based on work by David Ahern <dsahern@gmail.com>

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is used by subsequent patches. It fixes code style issues
caught by checkpatch.
Signed-off-by: NAlexander Aring <aring@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>