- 30 1月, 2008 4 次提交
-
-
由 Sam Ravnborg 提交于
fix: > WARNING: vmlinux.o(.data+0x4): Section mismatch: reference to .init.text:lguest_entry (between 'subarch_entries' and 'stack_start') Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ian Campbell 提交于
I am preparing to convert the boot time page table to the kernels native format. To achieve that I need to enable PAE. Enabling PSE and the no execute bit would not hurt. So this patch modifies the boot cpu path to execute all of the kernels enable code if and only if we have the proper bits set in mmu_cr4_features. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ian Campbell 提交于
Currently in head_32.S there are two ways we test to see if we are the boot cpu. By looking at %ebx and by looking at the static variable ready. When changing things around I have found that it gets tricky to preserve %ebx. So this patch just switches head.S over to the more reliable test of always using ready. Hopefully later we can kill these tests entirely. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Mika Penttilä <mika.penttila@kolumbus.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 02 1月, 2008 1 次提交
-
-
由 Rusty Russell 提交于
After 17d57a92 ("x86: fix x86-32 early fixmap initialization.") removing lg.ko caused a printk from vunmap: mm/memory.c:115: bad pgd 004b3027. On the second use after module load, the kernel crashes. This fixes the immediate problem (accessed and dirty bits not set as expected in pmd_none_or_clear_bad). I can't see why this would cause a crash, but I haven't been able to reproduce it once this is applied. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 12月, 2007 1 次提交
-
-
由 Eric W. Biederman 提交于
pageexec@freemail.hu writes: > i've just noticed that the chunk in i386/kernel/head.S ended up in a > weird place, namely, it's not going to be executed as it's just after > a 'jmp 3f' and before startup_32_smp, probably not what you intended. > on a sidenote, the whole thing can be done in a single insn, like: > > movl $(swapper_pg_pmd - __PAGE_OFFSET + 0x067), (swapper_pg_dir - > __PAGE_OFFSET+ 4092) Thanks for the reminder I thought we had fixed this problem a while ago. Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 10月, 2007 1 次提交
-
-
由 H. Peter Anvin 提交于
Make <asm/setup.h> usable by the boot code. Clean up vestiges of the old command-line protocol from setup.h and head_32.S (it is still supported from the boot loader point of view, since it is converted to the new command-line protocol by the boot code.) Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 22 10月, 2007 1 次提交
-
-
由 Rusty Russell 提交于
This patch uses the updated boot protocol to do paravirtualized boot. If the boot version is >= 2.07, then it will do two things: 1. Check the bootparams loadflags to see if we should reload the segment registers and clear interrupts. This is appropriate for normal native boot and some paravirtualized environments, but inapproprate for others. 2. Check the hardware architecture, and dispatch to the appropriate kernel entrypoint. If the bootloader doesn't set this, then we simply do the normal boot sequence. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NH. Peter Anvin <hpa@zytor.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 10月, 2007 2 次提交
-
-
由 Ingo Molnar 提交于
improve early fault output. old format: Int 14: CR2 010001e3 err 00000002 EIP c011f2f9 CS 00000060 flags 00010046 Stack: c073695e c0791c10 00000000 ffffffff 00000000 01000000 00001000 c0791c10 new format: BUG: Int 14: CR2 010001e3 EDI c1000000 ESI c0693c10 EBP c0637f9c ESP c0637f08 EBX 00000000 EDX 0000000e ECX 00000000 EAX 010001e3 err 00000002 EIP c0123119 CS 00000060 flg 00010046 Stack: c064d589 c0693000 00000000 c0637f60 00c001e3 01000000 00038000 00000163 00000000 00000163 00000000 ffffffff 00038000 00000000 00000000 00001000 00001000 00000000 c0637f88 c06509be c0a2ae60 00001000 00001000 00000000 Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
To preserve the DMA pool in CONFIG_DEBUG_PAGEALLOC=y kernels, we'll allocate pagetables from above the 16MB DMA limit, so we'll have to set up boot pagetables to cover 16MB more RAM (worst-case). Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 11 10月, 2007 3 次提交
-
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Thomas Gleixner 提交于
Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 8月, 2007 1 次提交
-
-
由 Andi Kleen 提交于
Fix WARNING: vmlinux.o(.text+0x183): Section mismatch: reference to .init.text:start_kernel (between 'is386' and 'check_x87') Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 7月, 2007 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
This patch is a rollup of all the core pieces of the Xen implementation, including: - booting and setup - pagetable setup - privileged instructions - segmentation - interrupt flags - upcalls - multicall batching BOOTING AND SETUP The vmlinux image is decorated with ELF notes which tell the Xen domain builder what the kernel's requirements are; the domain builder then constructs the address space accordingly and starts the kernel. Xen has its own entrypoint for the kernel (contained in an ELF note). The ELF notes are set up by xen-head.S, which is included into head.S. In principle it could be linked separately, but it seems to provoke lots of binutils bugs. Because the domain builder starts the kernel in a fairly sane state (32-bit protected mode, paging enabled, flat segments set up), there's not a lot of setup needed before starting the kernel proper. The main steps are: 1. Install the Xen paravirt_ops, which is simply a matter of a structure assignment. 2. Set init_mm to use the Xen-supplied pagetables (analogous to the head.S generated pagetables in a native boot). 3. Reserve address space for Xen, since it takes a chunk at the top of the address space for its own use. 4. Call start_kernel() PAGETABLE SETUP Once we hit the main kernel boot sequence, it will end up calling back via paravirt_ops to set up various pieces of Xen specific state. One of the critical things which requires a bit of extra care is the construction of the initial init_mm pagetable. Because Xen places tight constraints on pagetables (an active pagetable must always be valid, and must always be mapped read-only to the guest domain), we need to be careful when constructing the new pagetable to keep these constraints in mind. It turns out that the easiest way to do this is use the initial Xen-provided pagetable as a template, and then just insert new mappings for memory where a mapping doesn't already exist. This means that during pagetable setup, it uses a special version of xen_set_pte which ignores any attempt to remap a read-only page as read-write (since Xen will map its own initial pagetable as RO), but lets other changes to the ptes happen, so that things like NX are set properly. PRIVILEGED INSTRUCTIONS AND SEGMENTATION When the kernel runs under Xen, it runs in ring 1 rather than ring 0. This means that it is more privileged than user-mode in ring 3, but it still can't run privileged instructions directly. Non-performance critical instructions are dealt with by taking a privilege exception and trapping into the hypervisor and emulating the instruction, but more performance-critical instructions have their own specific paravirt_ops. In many cases we can avoid having to do any hypercalls for these instructions, or the Xen implementation is quite different from the normal native version. The privileged instructions fall into the broad classes of: Segmentation: setting up the GDT and the GDT entries, LDT, TLS and so on. Xen doesn't allow the GDT to be directly modified; all GDT updates are done via hypercalls where the new entries can be validated. This is important because Xen uses segment limits to prevent the guest kernel from damaging the hypervisor itself. Traps and exceptions: Xen uses a special format for trap entrypoints, so when the kernel wants to set an IDT entry, it needs to be converted to the form Xen expects. Xen sets int 0x80 up specially so that the trap goes straight from userspace into the guest kernel without going via the hypervisor. sysenter isn't supported. Kernel stack: The esp0 entry is extracted from the tss and provided to Xen. TLB operations: the various TLB calls are mapped into corresponding Xen hypercalls. Control registers: all the control registers are privileged. The most important is cr3, which points to the base of the current pagetable, and we handle it specially. Another instruction we treat specially is CPUID, even though its not privileged. We want to control what CPU features are visible to the rest of the kernel, and so CPUID ends up going into a paravirt_op. Xen implements this mainly to disable the ACPI and APIC subsystems. INTERRUPT FLAGS Xen maintains its own separate flag for masking events, which is contained within the per-cpu vcpu_info structure. Because the guest kernel runs in ring 1 and not 0, the IF flag in EFLAGS is completely ignored (and must be, because even if a guest domain disables interrupts for itself, it can't disable them overall). (A note on terminology: "events" and interrupts are effectively synonymous. However, rather than using an "enable flag", Xen uses a "mask flag", which blocks event delivery when it is non-zero.) There are paravirt_ops for each of cli/sti/save_fl/restore_fl, which are implemented to manage the Xen event mask state. The only thing worth noting is that when events are unmasked, we need to explicitly see if there's a pending event and call into the hypervisor to make sure it gets delivered. UPCALLS Xen needs a couple of upcall (or callback) functions to be implemented by each guest. One is the event upcalls, which is how events (interrupts, effectively) are delivered to the guests. The other is the failsafe callback, which is used to report errors in either reloading a segment register, or caused by iret. These are implemented in i386/kernel/entry.S so they can jump into the normal iret_exc path when necessary. MULTICALL BATCHING Xen provides a multicall mechanism, which allows multiple hypercalls to be issued at once in order to mitigate the cost of trapping into the hypervisor. This is particularly useful for context switches, since the 4-5 hypercalls they would normally need (reload cr3, update TLS, maybe update LDT) can be reduced to one. This patch implements a generic batching mechanism for hypercalls, which gets used in many places in the Xen code. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Cc: Ian Pratt <ian.pratt@xensource.com> Cc: Christian Limpach <Christian.Limpach@cl.cam.ac.uk> Cc: Adrian Bunk <bunk@stusta.de>
-
- 17 7月, 2007 1 次提交
-
-
由 Eric W. Biderman 提交于
Needed to get fixed virtual address for USB debug and earlycon with mmio. Signed-off-by: NEric W. Biderman <ebiderman@xmisson.com> Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Andi Kleen <ak@suse.de> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Gerd Hoffmann <kraxel@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 5月, 2007 1 次提交
-
-
由 Eric W. Biederman 提交于
This reverts commit c9ccf30d. Entering the kernel at startup_32 without passing our real mode data in %esi, and without guaranteeing that physical and virtual addresses are identity mapped makes head.S impossible to maintain. The only user of this infrastructure is lguest which is not merged so nothing we currently support will break by removing this over designed nightmare, and only the pending lguest patches will be affected. The pending Xen patches have a different entry point that they use. We are currently discussing what Xen and lguest need to do to boot the kernel in a more normal fashion so using startup_32 in this weird manner is clearly not their long term direction. So let's remove this code in head.S before it causes brain damage to people trying to maintain head.S Cc: Chris Wright <chrisw@sous-sol.org> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> CC: H. Peter Anvin <hpa@zytor.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 5月, 2007 6 次提交
-
-
由 Jeremy Fitzhardinge 提交于
head.S creates the very initial pagetable for the kernel. This just maps enough space for the kernel itself, and an allocation bitmap. The amount of mapped memory is rounded up to 4Mbytes, and so this typically ends up mapping 8Mbytes of memory. When booting, pagetable_init() needs to create mappings for all lowmem, and the pagetables for these mappings are allocated from the free pages around the kernel in low memory. If the number of pagetable pages + kernel size exceeds head.S's initial mapping, it will end up faulting on an unmapped page. This will only happen with specific combinations of kernel size and memory size. This patch makes sure that head.S also maps enough space to fit the kernel pagetables as well as the kernel itself. It ends up using an additional two pages of unreclaimable memory. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: N"H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <ak@suse.de> Cc: Zachary Amsden <zach@vmware.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Linus Torvalds <torvalds@linux-foundation.org>,
-
由 Jeremy Fitzhardinge 提交于
Currently x86 (similar to x84-64) has a special per-cpu structure called "i386_pda" which can be easily and efficiently referenced via the %fs register. An ELF section is more flexible than a structure, allowing any piece of code to use this area. Indeed, such a section already exists: the per-cpu area. So this patch: (1) Removes the PDA and uses per-cpu variables for each current member. (2) Replaces the __KERNEL_PDA segment with __KERNEL_PERCPU. (3) Creates a per-cpu mirror of __per_cpu_offset called this_cpu_off, which can be used to calculate addresses for this CPU's variables. (4) Simplifies startup, because %fs doesn't need to be loaded with a special segment at early boot; it can be deferred until the first percpu area is allocated (or never for UP). The result is less code and one less x86-specific concept. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de>
-
由 Jeremy Fitzhardinge 提交于
Xen wants a dedicated page for the GDT. I believe VMI likes it too. lguest, KVM and native don't care. Simple transformation to page-aligned "struct gdt_page". Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NJeremy Fitzhardinge <jeremy@xensource.com>
-
由 Sebastien Dugue 提交于
Rename boot_gdt_table to boot_gdt to avoid the duplicate T(able). Signed-off-by: NSebastien Dugue <sebastien.dugue@bull.net> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Rusty Russell 提交于
Now we are no longer dynamically allocating the GDT, we don't need the "cpu_gdt_table" at all: we can switch straight from "boot_gdt_table" to the per-cpu GDT. This means initializing the cpu_gdt array in C. The boot CPU uses the per-cpu var directly, then in smp_prepare_cpus() it switches to the per-cpu copy just allocated. For secondary CPUs, the early_gdt_descr is set to point directly to their per-cpu copy. For UP the code is very simple: it keeps using the "per-cpu" GDT as per SMP, but we never have to move. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
由 Ahmed S. Darwish 提交于
Fix comments to represent the true number of quadwords in GDT. Signed-off-by: NAhmed S. Darwish <darwish.07@gmail.com> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
-
- 13 2月, 2007 6 次提交
-
-
由 Rusty Russell 提交于
When I implemented the DECLARE_PER_CPU(var) macros, I was careful that people couldn't use "var" in a non-percpu context, by prepending percpu__. I never considered that this would allow them to overload the same name for a per-cpu and a non-percpu variable. It is only one of many horrors in the i386 boot code, but let's rename the non-perpcu cpu_gdt_descr to early_gdt_descr (not boot_gdt_descr, that's something else...) Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> ===================================================================
-
由 Rusty Russell 提交于
The current code simply calls "start_kernel" directly if we're under a hypervisor and no paravirt_ops backend wants us, because paravirt.c registers that as a backend. This was always a vain hope; start_kernel won't get far without setup. It's also impossible for paravirt_ops backends which don't sit in the arch/i386/kernel directory: they can't link before paravirt.o anyway. Keep it simple: if we pass all the registered paravirt probes, BUG(). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Vivek Goyal 提交于
o Entry startup_32 was in .text section but it was accessing some init data too and it prompts MODPOST to generate compilation warnings. WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100029) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:boot_params from .text between '_text' (at offset 0xc0100037) and 'startup_32_smp' WARNING: vmlinux - Section mismatch: reference to .init.data:init_pg_tables_end from .text between '_text' (at offset 0xc0100099) and 'startup_32_smp' o Can't move startup_32 to .init.text as this entry point has to be at the start of bzImage. Hence moved startup_32 to a new section .text.head and instructed MODPOST to not to generate warnings if init data is being accessed from .text.head section. This code has been audited. o SMP boot up code (startup_32_smp) can go into .init.text if CPU hotplug is not supported. Otherwise it generates more warnings WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100126) and 'is486' WARNING: vmlinux - Section mismatch: reference to .init.data:new_cpu_data from .text between 'checkCPUtype' (at offset 0xc0100130) and 'is486' Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Zachary Amsden 提交于
Fairly straightforward implementation of VMI backend for paravirt-ops. [Adrian Bunk: some cleanups] Signed-off-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Chris Wright <chrisw@sous-sol.org> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Jeremy Fitzhardinge 提交于
Convert the PDA code to use %fs rather than %gs as the segment for per-processor data. This is because some processors show a small but measurable performance gain for reloading a NULL segment selector (as %fs generally is in user-space) versus a non-NULL one (as %gs generally is). On modern processors the difference is very small, perhaps undetectable. Some old AMD "K6 3D+" processors are noticably slower when %fs is used rather than %gs; I have no idea why this might be, but I think they're sufficiently rare that it doesn't matter much. This patch also fixes the math emulator, which had not been adjusted to match the changed struct pt_regs. [frederik.deweerdt@gmail.com: fixit with gdb] [mingo@elte.hu: Fix KVM too] Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Ian Campbell <Ian.Campbell@XenSource.com> Acked-by: NIngo Molnar <mingo@elte.hu> Acked-by: NZachary Amsden <zach@vmware.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: NFrederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Alon Bar-Lev 提交于
1. Rename saved_command_line into boot_command_line. 2. Set command_line as __initdata. Signed-off-by: NAlon Bar-Lev <alon.barlev@gmail.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 12月, 2006 4 次提交
-
-
由 Rusty Russell 提交于
1) Each hypervisor writes a probe function to detect whether we are running under that hypervisor. paravirt_probe() registers this function. 2) If vmlinux is booted with ring != 0, we call all the probe functions (with registers except %esp intact) in link order: the winner will not return. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Zachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Jeremy Fitzhardinge 提交于
This patch is the meat of the PDA change. This patch makes several related changes: 1: Most significantly, %gs is now used in the kernel. This means that on entry, the old value of %gs is saved away, and it is reloaded with __KERNEL_PDA. 2: entry.S constructs the stack in the shape of struct pt_regs, and this is passed around the kernel so that the process's saved register state can be accessed. Unfortunately struct pt_regs doesn't currently have space for %gs (or %fs). This patch extends pt_regs to add space for gs (no space is allocated for %fs, since it won't be used, and it would just complicate the code in entry.S to work around the space). 3: Because %gs is now saved on the stack like %ds, %es and the integer registers, there are a number of places where it no longer needs to be handled specially; namely context switch, and saving/restoring the register state in a signal context. 4: And since kernel threads run in kernel space and call normal kernel code, they need to be created with their %gs == __KERNEL_PDA. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Jeremy Fitzhardinge 提交于
This patch has the basic definitions of struct i386_pda, and the segment selector in the GDT. asm-i386/pda.h is more or less a direct copy of asm-x86_64/pda.h. The most interesting difference is the use of _proxy_pda, which is used to give gcc a model for the actual memory operations on the real pda structure. No actual reference is ever made to _proxy_pda, so it is never defined. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Chuck Ebbert <76306.1226@compuserve.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
由 Stas Sergeev 提交于
Clean up the espfix code: - Introduced PER_CPU() macro to be used from asm - Introduced GET_DESC_BASE() macro to be used from asm - Rewrote the fixup code in asm, as calling a C code with the altered %ss appeared to be unsafe - No longer altering the stack from a .fixup section - 16bit per-cpu stack is no longer used, instead the stack segment base is patched the way so that the high word of the kernel and user %esp are the same. - Added the limit-patching for the espfix segment. (Chuck Ebbert) [jeremy@goop.org: use the x86 scaling addressing mode rather than shifting] Signed-off-by: NStas Sergeev <stsp@aknet.ru> Signed-off-by: NAndi Kleen <ak@suse.de> Acked-by: NZachary Amsden <zach@vmware.com> Acked-by: NChuck Ebbert <76306.1226@compuserve.com> Acked-by: NJan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 22 10月, 2006 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
The fake return address was being set to __KERNEL_PDA, rather than 0. Push it earlier while %eax still equals 0. Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Andrew Morton <akpm@osdl.org>
-
- 26 9月, 2006 1 次提交
-
-
由 Chuck Ebbert 提交于
Add early i386 fault handlers with debug information for common faults. Handles: divide error invalid opcode protection fault page fault Also adds code to detect early recursive/multiple faults and halt the system when they happen (taken from x86_64.) Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com> Signed-off-by: NAndi Kleen <ak@suse.de> Cc: Andi Kleen <ak@muc.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org>
-
- 31 8月, 2006 1 次提交
-
-
由 Andi Kleen 提交于
One open question: Should this added push perhaps be made conditional upon CONFIG_STACK_UNWIND or CONFIG_UNWIND_INFO? [AK: not needed, these are all very slow paths] Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 23 3月, 2006 1 次提交
-
-
由 Jan Beulich 提交于
With cpu_gdt_descr having been converted to per-CPU data, the old object (in head.S) no longer needs to reserve space for each CPU's instance. With cpu_gdt_table not being used for CPU 0 anymore, it doesn't seem to need page alignment (or if in fact there is a need for it to retain that alignment, the whole object should go into .data.page_align). Signed-off-by: NJan Beulich <jbeulich@novell.com> Acked-by: NZachary Amsden <zach@vmware.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 2月, 2006 1 次提交
-
-
由 James Bottomley 提交于
Recent GDT changes broke the SMP boot sequence if the booting CPU is numbered anything other than zero. There's also a subtle source of error in that the boot time CPU now uses cpu_gdt_table (which is actually the GDT for booting CPUs in head.S). This patch fixes both problems by making GDT descriptors themselves allocated from a per_cpu area and switching to them in cpu_init(), which now means that cpu_gdt_table is exclusively used for booting CPUs again. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com> Cc: Zachary Amsden <zach@vmware.com> Cc: Matt Tolentino <metolent@snoqualmie.dp.intel.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 12 2月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Lost a few hours debugging an early-bootup fault within printk itself, which manifested itself as a hard to debug early hang. This patch makes it much easier by printing out early faults via early_printk(), which function is a lot simpler than a full printk, and hence more likely to succeed in emergencies. (We do not recover from early faults anyway, so there's no loss from not having these messages in the normal printk buffer.) Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-