The NSP default buffer is a piece of NFP memory where additional
command data can be placed.  Its format has been copied from
host buffer, but the PCIe selection bits do not make sense in
this case.  If those get masked out from a NFP address - writes
to random place in the chip memory may be issued and crash the
device.

Even in the general NSP buffer case, it doesn't make sense to have the
PCIe selection bits there anymore. These are unused at the moment, and
when it becomes necessary, the PCIe selection bits should rather be
moved to another register to utilise more bits for the buffer address.

This has never been an issue because the buffer used to be
allocated in memory with less-than-38-bit-long address but that
is about to change.

Fixes: 1a64821c ("nfp: add support for service processor access")
Signed-off-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using wicked with a lan78xx device attached to the system, we
end up with ethtool commands issued on the device before an ifup
got issued. That lead to the following crash:

    Unable to handle kernel NULL pointer dereference at virtual address 0000039c
    pgd = ffff800035b30000
    [0000039c] *pgd=0000000000000000
    Internal error: Oops: 96000004 [#1] SMP
    Modules linked in: [...]
    Supported: Yes
    CPU: 3 PID: 638 Comm: wickedd Tainted: G            E      4.12.14-0-default #1
    Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018
    task: ffff800035e74180 task.stack: ffff800036718000
    PC is at phy_ethtool_ksettings_get+0x20/0x98
    LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
    pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005
    sp : ffff80003671bb20
    x29: ffff80003671bb20 x28: ffff800035e74180
    x27: ffff000008912000 x26: 000000000000001d
    x25: 0000000000000124 x24: ffff000008f74d00
    x23: 0000004000114809 x22: 0000000000000000
    x21: ffff80003671bbd0 x20: 0000000000000000
    x19: ffff80003671bbd0 x18: 000000000000040d
    x17: 0000000000000001 x16: 0000000000000000
    x15: 0000000000000000 x14: ffffffffffffffff
    x13: 0000000000000000 x12: 0000000000000020
    x11: 0101010101010101 x10: fefefefefefefeff
    x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364
    x7 : 0000000080808080 x6 : ffff80003671bc9c
    x5 : ffff80003671b9f8 x4 : ffff80002c296190
    x3 : 0000000000000000 x2 : 0000000000000000
    x1 : ffff80003671bbd0 x0 : ffff80003671bc00
    Process wickedd (pid: 638, stack limit = 0xffff800036718000)
    Call trace:
    Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20)
    b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000
    ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080
    ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101
    ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000
    ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0
    ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809
    baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000
    bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20
    bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900
    bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30
    [<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98
    [<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
    [<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210
    [<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180
    [<ffff0000087e5008>] dev_ioctl+0x400/0x630
    [<ffff00000879dd00>] sock_do_ioctl+0x70/0x88
    [<ffff00000879f5f8>] sock_ioctl+0x208/0x368
    [<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848
    [<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8
    Exception stack(0xffff80003671bec0 to 0xffff80003671c000)
    bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465
    bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465
    bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f
    bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68
    bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0
    bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000
    bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00
    bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0
    bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d
    bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000

The culprit is quite simple: The driver tries to access the phy left and right,
but only actually has a working reference to it when the device is up.

The fix thus is quite simple too: Get a reference to the phy on probe already
and keep it even when the device is going down.

With this patch applied, I can successfully run wicked on my system and bring
the interface up and down as many times as I want, without getting NULL pointer
dereferences in between.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We are currently counting packets with CHECKSUM_COMPLETE as
"hw_rx_csum_ok".  This is confusing.  Add a new counter.
To make sure it fits in the same cacheline move the less used
error counter to a different location.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When an item of struct tipc_subscription is created, we fail to
initialize the two lists aggregated into the struct. This has so far
never been a problem, since the items are just added to a root
object by list_add(), which does not require the addee list to be
pre-initialized. However, syzbot is provoking situations where this
addition fails, whereupon the attempted removal if the item from
the list causes a crash.

This problem seems to always have been around, despite that the code
for creating this object was rewritten in commit 242e82cc ("tipc:
collapse subscription creation functions"), which is still in net-next.

We fix this for that commit by initializing the two lists properly.

Fixes: 242e82cc ("tipc: collapse subscription creation functions")
Reported-by: syzbot+0bb443b74ce09197e970@syzkaller.appspotmail.com
Signed-off-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Alexey Kodanev says:

====================
ipv6: udp: set dst cache for a connected sk if current not valid

A new RTF_CACHE route can be created with the socket's dst cache
update between the below calls in udpv6_sendmsg(), when datagram
sending results to ICMPV6_PKT_TOOBIG error:

   dst = ip6_sk_dst_lookup_flow(...)
   ...
release_dst:
    if (dst) {
        if (connected) {
            ip6_dst_store(sk, dst)

Therefore, the new socket's dst cache reset to the old one on
"release_dst:".

The first three patches prepare the code to store dst cache
with ip6_sk_dst_lookup_flow():

  * the first patch adds ip6_sk_dst_store_flow() function with
    commonly used source and destiantion addresses checks using
    the flow information.

  * the second patch adds a new argument to ip6_sk_dst_lookup_flow()
    and ability to store dst in the socket's cache. Also, the two
    users of the function are updated without enabling the new
    behavior: pingv6_sendmsg() and udpv6_sendmsg().

  * the third patch makes 'connected' variable in udpv6_sendmsg()
    to be consistent with ip6_sk_dst_store_flow(), changes its type
    from int to bool.

The last patch contains the actual fix that removes sk dst cache
update in the end of udpv6_sendmsg(), and allows to do it in
ip6_sk_dst_lookup_flow().

v6: * use bool type for a new parameter in ip_sk_dst_lookup_flow()
    * add one more patch to convert 'connected' variable in
      udpv6_sendmsg() from int to bool type. If it shouldn't be
      here I will resend it when the net-next is opened.

v5: * relocate ip6_sk_dst_store_flow() to net/ipv6/route.c and
      rename ip6_dst_store_flow() to ip6_sk_dst_store_flow() as
      suggested by Martin

v4: * fix the error in the build of ip_dst_store_flow() reported by
      kbuild test robot due to missing checks for CONFIG_IPV6: add
      new function to ip6_output.c instead of ip6_route.h
    * add 'const' to struct flowi6 in ip6_dst_store_flow()
    * minor commit messages fixes

v3: * instead of moving ip6_dst_store() above udp_v6_send_skb(),
      update socket's dst cache inside ip6_sk_dst_lookup_flow()
      if the current one is invalid
    * the issue not reproduced in 4.1, but starting from 4.2. Add
      one more 'Fixes:' commit that creates new RTF_CACHE route.
      Though, it is also mentioned in the first one
====================
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A new RTF_CACHE route can be created between ip6_sk_dst_lookup_flow()
and ip6_dst_store() calls in udpv6_sendmsg(), when datagram sending
results to ICMPV6_PKT_TOOBIG error:

    udp_v6_send_skb(), for example with vti6 tunnel:
        vti6_xmit(), get ICMPV6_PKT_TOOBIG error
            skb_dst_update_pmtu(), can create a RTF_CACHE clone
            icmpv6_send()
    ...
    udpv6_err()
        ip6_sk_update_pmtu()
           ip6_update_pmtu(), can create a RTF_CACHE clone
           ...
           ip6_datagram_dst_update()
                ip6_dst_store()

And after commit 33c162a9 ("ipv6: datagram: Update dst cache of
a connected datagram sk during pmtu update"), the UDPv6 error handler
can update socket's dst cache, but it can happen before the update in
the end of udpv6_sendmsg(), preventing getting the new dst cache on
the next udpv6_sendmsg() calls.

In order to fix it, save dst in a connected socket only if the current
socket's dst cache is invalid.

The previous patch prepared ip6_sk_dst_lookup_flow() to do that with
the new argument, and this patch enables it in udpv6_sendmsg().

Fixes: 33c162a9 ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update")
Fixes: 45e4fd26 ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This should make it consistent with ip6_sk_dst_lookup_flow()
that is accepting the new 'connected' parameter of type bool.
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update
the cache only if ip6_sk_dst_check() returns NULL and a socket
is connected.

The function is used as before, the new behavior for UDP sockets
in udpv6_sendmsg() will be enabled in the next patch.
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move commonly used pattern of ip6_dst_store() usage to a separate
function - ip6_sk_dst_store_flow(), which will check the addresses
for equality using the flow information, before saving them.

There is no functional changes in this patch. In addition, it will
be used in the next patch, in ip6_sk_dst_lookup_flow().
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a thermal monitoring device for the Marvell 88x3310, which updates
once a second.  We also need to hook into the suspend/resume mechanism
to ensure that the thermal monitoring is reconfigured when we resume.
Suggested-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Once dst has been cached in socket via sk_setup_caps(),
it is illegal to call ip_rt_put() (or dst_release()),
since sk_setup_caps() did not change dst refcount.

We can still dereference it since we hold socket lock.

Caugth by syzbot :

BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185
Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088

CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:17 [inline]
 dump_stack+0x1a7/0x27d lib/dump_stack.c:53
 print_address_description+0x73/0x250 mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report+0x23c/0x360 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
 atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
 dst_release+0x27/0xa0 net/core/dst.c:185
 sk_dst_set include/net/sock.h:1812 [inline]
 sk_dst_reset include/net/sock.h:1824 [inline]
 sock_setbindtodevice net/core/sock.c:610 [inline]
 sock_setsockopt+0x431/0x1b20 net/core/sock.c:707
 SYSC_setsockopt net/socket.c:1845 [inline]
 SyS_setsockopt+0x2ff/0x360 net/socket.c:1828
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4552d9
RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9
RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000
R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000

Allocated by task 20088:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542
 dst_alloc+0x11f/0x1a0 net/core/dst.c:104
 rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520
 __mkroute_output net/ipv4/route.c:2265 [inline]
 ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493
 ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322
 __ip_route_output_key include/net/route.h:126 [inline]
 ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577
 ip_route_output_ports include/net/route.h:163 [inline]
 pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453
 SYSC_connect+0x213/0x4a0 net/socket.c:1639
 SyS_connect+0x24/0x30 net/socket.c:1620
 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x42/0xb7

Freed by task 20082:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:447
 set_track mm/kasan/kasan.c:459 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527
 __cache_free mm/slab.c:3486 [inline]
 kmem_cache_free+0x83/0x2a0 mm/slab.c:3744
 dst_destroy+0x266/0x380 net/core/dst.c:140
 dst_destroy_rcu+0x16/0x20 net/core/dst.c:153
 __rcu_reclaim kernel/rcu/rcu.h:178 [inline]
 rcu_do_batch kernel/rcu/tree.c:2675 [inline]
 invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline]
 __rcu_process_callbacks kernel/rcu/tree.c:2897 [inline]
 rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914
 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285

The buggy address belongs to the object at ffff8801c54dc000
 which belongs to the cache ip_dst_cache of size 168
The buggy address is located 64 bytes inside of
 168-byte region [ffff8801c54dc000, ffff8801c54dc0a8)
The buggy address belongs to the page:
page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010
raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We would be passing 0 instead of NULL as the rsp argument to
mt7530_fdb_cmd(), fix that.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: NSean Wang <sean.wang@mediatek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sparse complains about the following warnings:

drivers/net/dsa/b53/b53_mmap.c:33:31: warning: incorrect type in
initializer (different address spaces)
drivers/net/dsa/b53/b53_mmap.c:33:31:    expected unsigned char
[noderef] [usertype] <asn:2>*regs
drivers/net/dsa/b53/b53_mmap.c:33:31:    got void *priv

and indeed, while what we are doing is functional, we are dereferencing
a void * pointer into a void __iomem * which is not great. Just use the
defined b53_mmap_priv structure which holds our register base and use
that.

Fixes: 967dd82f ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit 581319c5 ("net/socket: use per af lockdep classes for sk queues")
sock queue locks now have per-af lockdep classes, including unix socket.
It is no longer necessary to workaround it.

I noticed this while looking at a syzbot deadlock report, this patch
itself doesn't fix it (this is why I don't add Reported-by).

Fixes: 581319c5 ("net/socket: use per af lockdep classes for sk queues")
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: Broadcom drivers sparse fixes

This patch series fixes the same warning reported by sparse in bcmsysport and
bcmgenet in the code that deals with inserting the TX checksum pointers:

drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: warning: cast from restricted __be16
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: warning: incorrect type in argument 1 (different base types)
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26:    expected unsigned short [unsigned] [usertype] val
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26:    got restricted __be16 [usertype] protocol

This patch fixes both issues by using the same construct and not swapping
skb->protocol but instead the values we are checking against.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb->protocol is a __be16 which we would be calling htons() against,
while this is not wrong per-se as it correctly results in swapping the
value on LE hosts, this still upsets sparse. Adopt a similar pattern to
what other drivers do and just assign ip_ver to skb->protocol, and then
use htons() against the different constants such that the compiler can
resolve the values at build time.

Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb->protocol is a __be16 which we would be calling htons() against,
while this is not wrong per-se as it correctly results in swapping the
value on LE hosts, this still upsets sparse. Adopt a similar pattern to
what other drivers do and just assign ip_ver to skb->protocol, and then
use htons() against the different constants such that the compiler can
resolve the values at build time.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By analogy with other Rx implementations, RxRPC packet types 9, 10 and 11
should just be discarded rather than being aborted like other undefined
packet types.
Reported-by: NJeffrey Altman <jaltman@auristor.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge branch 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull namespace updates from Eric Biederman:
 "There was a lot of work this cycle fixing bugs that were discovered
  after the merge window and getting everything ready where we can
  reasonably support fully unprivileged fuse. The bug fixes you already
  have and much of the unprivileged fuse work is coming in via other
  trees.

  Still left for fully unprivileged fuse is figuring out how to cleanly
  handle .set_acl and .get_acl in the legacy case, and properly handling
  of evm xattrs on unprivileged mounts.

  Included in the tree is a cleanup from Alexely that replaced a linked
  list with a statically allocated fix sized array for the pid caches,
  which simplifies and speeds things up.

  Then there is are some cleanups and fixes for the ipc namespace. The
  motivation was that in reviewing other code it was discovered that
  access ipc objects from different pid namespaces recorded pids in such
  a way that when asked the wrong pids were returned. In the worst case
  there has been a measured 30% performance impact for sysvipc
  semaphores. Other test cases showed no measurable performance impact.
  Manfred Spraul and Davidlohr Bueso who tend to work on sysvipc
  performance both gave the nod that this is good enough.

  Casey Schaufler and James Morris have given their approval to the LSM
  side of the changes.

  I simplified the types and the code dealing with sysvipc to pass just
  kern_ipc_perm for all three types of ipc. Which reduced the header
  dependencies throughout the kernel and simplified the lsm code.

  Which let me work on the pid fixes without having to worry about
  trivial changes causing complete kernel recompiles"

* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc/shm: Fix pid freeing.
  ipc/shm: fix up for struct file no longer being available in shm.h
  ipc/smack: Tidy up from the change in type of the ipc security hooks
  ipc: Directly call the security hook in ipc_ops.associate
  ipc/sem: Fix semctl(..., GETPID, ...) between pid namespaces
  ipc/msg: Fix msgctl(..., IPC_STAT, ...) between pid namespaces
  ipc/shm: Fix shmctl(..., IPC_STAT, ...) between pid namespaces.
  ipc/util: Helpers for making the sysvipc operations pid namespace aware
  ipc: Move IPCMNI from include/ipc.h into ipc/util.h
  msg: Move struct msg_queue into ipc/msg.c
  shm: Move struct shmid_kernel into ipc/shm.c
  sem: Move struct sem and struct sem_array into ipc/sem.c
  msg/security: Pass kern_ipc_perm not msg_queue into the msg_queue security hooks
  shm/security: Pass kern_ipc_perm not shmid_kernel into the shm security hooks
  sem/security: Pass kern_ipc_perm not sem_array into the sem security hooks
  pidns: simpler allocation of pid_* caches

Pull workqueue updates from Tejun Heo:
 "rcu_work addition and a couple trivial changes"

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove the comment about the old manager_arb mutex
  workqueue: fix the comments of nr_idle
  fs/aio: Use rcu_work instead of explicit rcu and work item
  cgroup: Use rcu_work instead of explicit rcu and work item
  RCU, workqueue: Implement rcu_work

Pull libata updates from Tejun Heo:
 "Nothing too interesting.

  The biggest change is refcnting fix for ata_host - the bug is recent
  and can only be triggered on controller hotplug, so very few are
  hitting it.

  There also are a number of trivial license / error message changes and
  some hardware specific changes"

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits)
  ahci: imx: add the imx8qm ahci sata support
  libata: ensure host is free'd on error exit paths
  ata: ahci-platform: add reset control support
  ahci: imx: fix the build warning
  ata: add Amiga Gayle PATA controller driver
  ahci: imx: add the imx6qp ahci sata support
  ata: change Tegra124 to Tegra
  ata: ahci_tegra: Add AHCI support for Tegra210
  ata: ahci_tegra: disable DIPM
  ata: ahci_tegra: disable devslp for Tegra124
  ata: ahci_tegra: initialize regulators from soc struct
  ata: ahci_tegra: Update initialization sequence
  dt-bindings: Tegra210: add binding documentation
  libata: add refcounting to ata_host
  pata_bk3710: clarify license version and use SPDX header
  pata_falcon: clarify license version and use SPDX header
  pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
  pata_macio: Delete an error message for a failed memory allocation in two functions
  pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
  sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - new CEC pin injection code for testing purposes

 - DVB frontend cxd2099 promoted from staging

 - new platform driver for Sony cxd2880 DVB devices

 - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
   tw9910.c

 - removal of unused cx18 and ivtv alsa mixers

 - the reneseas-ceu driver doesn't depend on soc_camera anymore and
   moved from staging

 - removed the mantis_vp3028 driver, unused since 2009

 - s5p-mfc: add support for version 10 of the MSP

 - added a decoder for imon protocol

 - atomisp: lots of cleanups

 - imx074 and mt9t031: don't depend on soc_camera anymore, being
   promoted from staging

 - added helper functions to better support DVB I2C binding

 - lots of driver improvements and cleanups

* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
  media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
  media: fimc-capture: get rid of two warnings
  media: dvb-usb-v2: fix a missing dependency of I2C_MUX
  media: uvc: to the right check at uvc_ioctl_enum_framesizes()
  media: cec-core: fix a bug at cec_error_inj_write()
  media: tda9840: cleanup a warning
  media: tm6000:  avoid casting just to print pointer address
  media: em28xx-input: improve error handling code
  media: zr364xx: avoid casting just to print pointer address
  media: vivid-radio-rx: add a cast to avoid a warning
  media: saa7134-alsa: don't use casts to print a buffer address
  media: solo6x10: get rid of an address space warning
  media: zoran: don't cast pointers to print them
  media: ir-kbd-i2c: change the if logic to avoid a warning
  media: ir-kbd-i2c: improve error handling code
  media: saa7134-input: improve error handling
  media: s2255drv: fix a casting warning
  media: ivtvfb: Cleanup some warnings
  media: videobuf-dma-sg: Fix a weird cast
  soc_camera: fix a weird cast on printk
  ...

Pull Kconfig updates from Masahiro Yamada:

 - improve checkpatch for more precise Kconfig code checking

 - clarify effective selects by grouping reverse dependencies in help

 - do not write out '# CONFIG_FOO is not set' from invisible symbols

 - make oldconfig as silent as it should be

 - rename 'silentoldconfig' to 'syncconfig'

 - add unit-test framework and several test cases

 - warn unmet dependency of tristate symbols

 - make unmet dependency warnings readable, removing false positives

 - improve recursive include detection

 - use yylineno to simplify the line number tracking

 - misc cleanups

* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: use yylineno option instead of manual lineno increments
  kconfig: detect recursive inclusion earlier
  kconfig: remove duplicated file name and lineno of recursive inclusion
  kconfig: do not include both curses.h and ncurses.h for nconfig
  kconfig: make unmet dependency warnings readable
  kconfig: warn unmet direct dependency of tristate symbols selected by y
  kconfig: tests: test if recursive inclusion is detected
  kconfig: tests: test if recursive dependencies are detected
  kconfig: tests: test randconfig for choice in choice
  kconfig: tests: test defconfig when two choices interact
  kconfig: tests: check visibility of tristate choice values in y choice
  kconfig: tests: check unneeded "is not set" with unmet dependency
  kconfig: tests: test if new symbols in choice are asked
  kconfig: tests: test automatic submenu creation
  kconfig: tests: add basic choice tests
  kconfig: tests: add framework for Kconfig unit testing
  kbuild: add PYTHON2 and PYTHON3 variables
  kconfig: remove redundant streamline_config.pl prerequisite
  kconfig: rename silentoldconfig to syncconfig
  kconfig: invoke oldconfig instead of silentoldconfig from local*config
  ...

Pull Kbuild updates from Masahiro Yamada:

 - add a shell script to get Clang version

 - improve portability of build scripts

 - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code

 - rename built-in.o which is now thin archive to built-in.a

 - process clean/build targets one by one to get along with -j option

 - simplify ld-option

 - improve building with CONFIG_TRIM_UNUSED_KSYMS

 - define KBUILD_MODNAME even for objects shared among multiple modules

 - avoid linking multiple instances of same objects from composite
   objects

 - move <linux/compiler_types.h> to c_flags to include it only for C
   files

 - clean-up various Makefiles

* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
  kbuild: clean up link rule of composite modules
  kbuild: clean up archive rule of built-in.a
  kbuild: remove partial section mismatch detection for built-in.a
  net: liquidio: clean up Makefile for simpler composite object handling
  lib: zstd: clean up Makefile for simpler composite object handling
  kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
  kbuild: rename real-objs-y/m to real-obj-y/m
  kbuild: move modname and modname-multi close to modname_flags
  kbuild: simplify modname calculation
  kbuild: fix modname for composite modules
  kbuild: define KBUILD_MODNAME even if multiple modules share objects
  kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
  kbuild: Use ls(1) instead of stat(1) to obtain file size
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
  kbuild: move include/config/ksym/* to include/ksym/*
  kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
  kbuild: restore autoksyms.h touch to the top Makefile
  kbuild: move 'scripts' target below
  kbuild: remove wrong 'touch' in adjust_autoksyms.sh
  ...

Pull parisc updates from Helge Deller:
 "Lots of small enhancements and fixes in this patchset:

   - improved the x86-64 compatibility for PCI cards by returning -1UL
     for timed out MMIO transactions (instead of crashing)

   - fixed HPMC handler for PAT machines: size needs to be multiple of 16

   - prepare machine_power_off() to be able to turn rp3410 and c8000
     machines off via IMPI

   - added code to extract machine info for usage with qemu

   - some init sections fixes

   - lots of fixes for sparse-, ubsan- and uninitalized variables
     warnings"

* 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix out of array access in match_pci_device()
  parisc: Add code generator for Qemu/SeaBIOS machine info
  parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
  parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
  parisc: Directly call machine_power_off() in power button driver
  parisc: machine_power_off() should call pm_power_off()
  parisc/Kconfig: SMP kernels boot on all machines
  parisc: Silence uninitialized variable warning in dbl_to_sgl_fcnvff()
  parisc: Move various functions and strings to init section
  parisc: Convert MAP_TYPE to cover 4 bits on parisc
  parisc: Force to various endian types for sparse
  parisc/gscps2: Fix sparse warnings
  parisc/led: Fix sparse warnings
  parisc/parport_gsc: Use NULL to avoid sparse warning
  parisc/stifb: Use fb_memset() to avoid sparse warning

Pull sparc updates from David Miller:

 1) Add support for ADI (Application Data Integrity) found in more
    recent sparc64 cpus. Essentially this is keyed based access to
    virtual memory, and if the key encoded in the virual address is
    wrong you get a trap.

    The mm changes were reviewed by Andrew Morton and others.

    Work by Khalid Aziz.

 2) Validate DAX completion index range properly, from Rob Gardner.

 3) Add proper Kconfig deps for DAX driver. From Guenter Roeck.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  sparc64: Make atomic_xchg() an inline function rather than a macro.
  sparc64: Properly range check DAX completion index
  sparc: Make auxiliary vectors for ADI available on 32-bit as well
  sparc64: Oracle DAX driver depends on SPARC64
  sparc64: Update signal delivery to use new helper functions
  sparc64: Add support for ADI (Application Data Integrity)
  mm: Allow arch code to override copy_highpage()
  mm: Clear arch specific VM flags on protection change
  mm: Add address parameter to arch_validate_prot()
  sparc64: Add auxiliary vectors to report platform ADI properties
  sparc64: Add handler for "Memory Corruption Detected" trap
  sparc64: Add HV fault type handlers for ADI related faults
  sparc64: Add support for ADI register fields, ASIs and traps
  mm, swap: Add infrastructure for saving page metadata on swap
  signals, sparc: Add signal codes for ADI violations

Pull networking updates from David Miller:

 1) Support offloading wireless authentication to userspace via
    NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.

 2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
    Setup and cleanup of namespaces now all run asynchronously and thus
    performance is significantly increased.

 3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
    Streiff.

 4) Support zerocopy on RDS sockets, from Sowmini Varadhan.

 5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
    Borkmann.

 6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
    Chevallier.

 7) Support grafting of child qdiscs in mlxsw driver, from Nogah
    Frankel.

 8) Add packet forwarding tests to selftests, from Ido Schimmel.

 9) Deal with sub-optimal GSO packets better in BBR congestion control,
    from Eric Dumazet.

10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.

11) Add path MTU tests to selftests, from Stefano Brivio.

12) Various bits of IPSEC offloading support for mlx5, from Aviad
    Yehezkel, Yossi Kuperman, and Saeed Mahameed.

13) Support RSS spreading on ntuple filters in SFC driver, from Edward
    Cree.

14) Lots of sockmap work from John Fastabend. Applications can use eBPF
    to filter sendmsg and sendpage operations.

15) In-kernel receive TLS support, from Dave Watson.

16) Add XDP support to ixgbevf, this is significant because it should
    allow optimized XDP usage in various cloud environments. From Tony
    Nguyen.

17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
    Venkataramanan et al.

18) IP fragmentation match offload support in nfp driver, from Pieter
    Jansen van Vuuren.

19) Support XDP redirect in i40e driver, from Björn Töpel.

20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
    tracepoints in their raw form, from Alexei Starovoitov.

21) Lots of striding RQ improvements to mlx5 driver with many
    performance improvements, from Tariq Toukan.

22) Use rhashtable for inet frag reassembly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
  net: mvneta: improve suspend/resume
  net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
  ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
  net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
  net: bgmac: Correctly annotate register space
  route: check sysctl_fib_multipath_use_neigh earlier than hash
  fix typo in command value in drivers/net/phy/mdio-bitbang.
  sky2: Increase D3 delay to sky2 stops working after suspend
  net/mlx5e: Set EQE based as default TX interrupt moderation mode
  ibmvnic: Disable irqs before exiting reset from closed state
  net: sched: do not emit messages while holding spinlock
  vlan: also check phy_driver ts_info for vlan's real device
  Bluetooth: Mark expected switch fall-throughs
  Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
  Bluetooth: btrsi: remove unused including <linux/version.h>
  Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
  sh_eth: kill useless check in __sh_eth_get_regs()
  sh_eth: add sh_eth_cpu_data::no_xdfar flag
  ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
  ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
  ...

Pull documentation updates from Jonathan Corbet:
 "There's been a fair amount of activity in Documentation/ this time
  around:

   - Lots of work aligning Documentation/ABI with reality, done by
     Aishwarya Pant.

   - The trace documentation has been converted to RST by Changbin Du

   - I thrashed up kernel-doc to deal with a parsing issue and to try to
     make the code more readable. It's still a 20+-year-old Perl hack,
     though.

   - Lots of other updates, typo fixes, and more"

* tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits)
  Documentation/process: update FUSE project website
  docs: kernel-doc: fix parsing of arrays
  dmaengine: Fix spelling for parenthesis in dmatest documentation
  dmaengine: Make dmatest.rst indeed reST compatible
  dmaengine: Add note to dmatest documentation about supported channels
  Documentation: magic-numbers: Fix typo
  Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands
  Input: alps - Update documentation for trackstick v3 format
  Documentation: Mention why %p prints ptrval
  COPYING: use the new text with points to the license files
  COPYING: create a new file with points to the Kernel license files
  Input: trackpoint: document sysfs interface
  xfs: Change URL for the project in xfs.txt
  char/bsr: add sysfs interface documentation
  acpi: nfit: document sysfs interface
  block: rbd: update sysfs interface
  Documentation/sparse: fix typo
  Documentation/CodingStyle: Add an example for braces
  docs/vm: update 00-INDEX
  kernel-doc: Remove __sched markings
  ...

Merge tag 'leds_for_4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - add driver for Mellanox regmap LEDs

  Improvement to ledtrig-disk:
   - extend disk trigger for reads and writes

  Improvements and fixes to existing LED class drivers:
   - add more product/board names for PC Engines APU2
   - fix wrong dmi_match on PC Engines APU LEDs
   - clarify chips supported by LM355x driver
   - fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG
   - allow leds-mlxcpld compilation for 32 bit arch"

* tag 'leds_for_4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: Fix wrong dmi_match on PC Engines APU LEDs
  leds: Extends disk trigger for reads and writes
  leds: Add more product/board names for PC Engines APU2
  leds: add driver for support Mellanox regmap LEDs for BMC and x86 platform
  leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIG
  leds: Clarify supported chips by LM355x driver
  leds: leds-mlxcpld: Allow compilation for 32 bit arch

Pull IPMI updates from Corey Minyard:
 "Mostly small changes, as usual.

  This does add an IPMI BMC server-side driver, to allow a Linux system
  to act as an IPMI controller. That's the biggest change, but it is
  just a new driver that is fairly narrow in use.

  The other largish change is removing ACPI SPMI probe support, which
  should have never really been there in the beginning"

* tag 'for-linus-4.17' of git://github.com/cminyard/linux-ipmi:
  ipmi/parisc: Add IPMI chassis poweroff for certain HP PA-RISC and IA-64 servers
  ipmi_ssif: Fix kernel panic at msg_done_handler
  ipmi:pci: Blacklist a Realtek "IPMI" device
  ipmi: Remove ACPI SPMI probing from the system interface driver
  ipmi: Remove ACPI SPMI probing from the SSIF (I2C) driver
  ipmi: missing error code in try_smi_init()
  ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation
  ipmi: Consolidate cleanup code
  ipmi: Remove some unnecessary initializations
  ipmi: Fix some error cleanup issues
  ipmi: Add or fix SPDX-License-Identifier in all files
  ipmi: Re-use existing macros for built-in properties
  ipmi:pci: Make the PCI defines consistent with normal Linux ones
  ipmi: kcs_bmc: coding-style fixes and use new poll type
  char/ipmi: add documentation for sysfs interface
  ipmi: kcs_bmc: mark expected switch fall-through in kcs_bmc_handle_data
  ipmi: add an Aspeed KCS IPMI BMC driver
  ipmi: add a KCS IPMI BMC driver

Pull pin control bulk updates from Linus Walleij:
 "New drivers:

   - Qualcomm SDM845: this is their new flagship SoC platform which
     seems to be targeted at premium mobile handsets.

   - Renesas R-Car M3-N SoC.

   - Renesas R8A77980 SoC.

   - NXP (ex Freescale) i.MX 6SLL SoC.

   - Mediatek MT2712 SoC.

   - Allwinner H6 SoC.

  Improvements:

   - Uniphier adds a few new functions and pins.

   - Renesas refactorings and additional pin definitions.

   - Improved pin groups for Axis Artpec6.

  Cleanup:

   - Drop the TZ1090 drivers. This platform is no longer maintained and
     is being deleted.

   - Drop ST-Ericsson U8540/U9540 support as this was never
     productified.

   - Overall minor fixes and janitorial"

* tag 'pinctrl-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: uniphier: add UART hardware flow control pin-mux settings
  pinctrl: sunxi: add support for the Allwinner H6 main pin controller
  pinctrl: sunxi: change irq_bank_base to irq_bank_map
  pinctrl: sunxi: introduce IRQ bank conversion function
  pinctrl: sunxi: refactor irq related register function to have desc
  pinctrl: msm8998: Remove owner assignment from platform_driver
  pinctrl: uniphier: divide I2S and S/PDIF audio out pin-mux group
  pinctrl: uniphier: add PXs2 Audio in/out pin-mux settings
  pinctrl/amd: poll InterruptEnable bits in enable_irq
  pinctrl: ocelot: fix gpio direction
  pinctrl: mtk: fix check warnings.
  pintcrl: mtk: support bias-disable of generic and special pins simultaneously
  pinctrl: add mt2712 pinctrl driver
  pinctrl: pinctrl-single: Fix pcs_request_gpio() when bits_per_mux != 0
  pinctrl: imx: Add pinctrl driver support for imx6sll
  dt-bindings: imx: update pinctrl doc for imx6sll
  pinctrl: intel: Implement intel_gpio_get_direction callback
  pinctrl: stm32: add 'depends on HAS_IOMEM' to fix unmet dependency
  pinctrl: mediatek: mtk-common: use true and false for boolean values
  pinctrl: sunxi: always look for apb block
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Export host capabilities through debugfs
   - Export card RCA register via sysfs
   - Improve card initializing sequence while enabling 4-bit bus
   - Export a function to enable/disable wakeup for card detect IRQ

  MMC host:
   - dw_mmc: Add support for new hi3798cv200 variant
   - dw_mmc: Remove support for some deprecated DT properties
   - mediatek: Add support for new variant used on MT7622 SoC
   - sdhci: Improve wakeup support for SDIO IRQs
   - sdhci: Improve wakeup support for card detect IRQs
   - sdhci-omap: Add tuning support
   - sdhci_omap: Add UHS-I mode support
   - sunxi: Prepare for runtime PM support via a few re-factorings
   - tmio: deprecate "toshiba,mmc-wrprotect-disable" DT property
   - tmio/renesas_sdhi: Consolidate code supporting write protect
   - tmio: Improve DMA vs PIO handling
   - tmio: Add support for IP-builtin card detection logic"

* tag 'mmc-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (55 commits)
  mmc: renesas_sdhi: replace EXT_ACC with HOST_MODE
  mmc: update sdio_claim_irq documentation
  mmc: Export host capabilities to debugfs.
  mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards
  mmc: block: fix updating ext_csd caches on ioctl call
  mmc: sunxi: Set our device drvdata earlier
  mmc: sunxi: Move the reset deassertion before enabling the clocks
  mmc: sunxi: Move resources management to separate functions
  mmc: dw_mmc: add support for hi3798cv200 specific extensions of dw-mshc
  dt-bindings: mmc: add bindings for hi3798cv200-dw-mshc
  mmc: core: Export card RCA register via sysfs
  mmc: renesas_sdhi: fix WP detection
  mmc: core: Use memdup_user() rather than duplicating its implementation
  mmc: dw_mmc-rockchip: correct property names in debug
  mmc: sd: Remove redundant err assignment from mmc_read_switch
  mmc: sdio: Check the return value of sdio_enable_4bit_bus
  mmc: core: Don't try UHS-I mode if 4-bit mode isn't supported
  arm64: dts: hi3660: remove 'num-slots' property for dwmmc
  ARM: dts: lpc18xx: remove 'num-slots' property for dwmmc
  arm64: dts: stratix10: remove 'num-slots' property for dwmmc
  ...

Pull HSI updates from Sebastian Reichel:

 - spelling/typo fixes

 - remove extra error printing for -ENOMEM

* tag 'hsi-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: hsi_char: Delete an error message for a failed memory allocation in hsc_probe()
  HSI: ssi_protocol: fix spelling mistake: "trigerred" -> "triggered"
  HSI: ssi_protocol: Delete an error message for a failed memory allocation in ssi_protocol_probe()
  HSI: ssi_protocol: Fix a typo in two comment lines

Pull power supply and reset updates from Sebastian Reichel:

 - Microsemi Ocelot reset support

 - Spreadtrum SC27xx reset support

 - generic gpio charger: lot's of cleanups

 - axp20x fuel gauge: add AXP813 support

 - misc fixes, including one devicetree change for the Nokia N900, that
   has been Acked-by Tony Lindgren

* tag 'for-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (27 commits)
  power: reset: at91-reset: Switch from the pr_*() to the dev_*() logging functions
  power: reset: at91-poweroff: Remove redundant dev_err call in at91_poweroff_probe()
  power: reset: at91-poweroff: Switch from the pr_*() to the dev_*() logging functions
  power: reset: make function sc27xx_poweroff_shutdown static
  power: supply: da9150-fg: remove VLA usage
  ARM: dts: omap3-n900: Add link between battery and charger
  power: supply: bq2415x: add DT referencing support
  power: supply: bq27xxx: support missing supplier device
  max17042: propagate of_node to power supply device
  power: supply: axp288_fuel_gauge: Fix full status reporting
  power: supply: axp288_fuel_gauge: Do not register FG on ECS EF20EA
  power: reset: gpio-poweroff: Support for timeout from device property
  dt-bindings: power: reset: gpio-poweroff: Add 'timeout-ms' property
  power: reset: Add Spreadtrum SC27xx PMIC power off support
  power: supply: axp20x_battery: add support for AXP813
  dt-bindings: power: supply: axp20x: add AXP813 battery DT binding
  power: supply: axp20x_battery: use data struct for variant specific code
  power: supply: gpio-charger: Remove pdata from gpio_charger
  power: supply: gpio-charger: Use GPIOF_ACTIVE_LOW for legacy setup
  power: supply: gpio-charger: Remove redundant dev_err call in probe function
  ...

Pull SPI updates from Mark Brown:
 "A quiet release for SPI, some fixes and small updates for individual
  drivers with one bigger change from Linus Walleij which coverts the
  bitbanging SPI driver to use the GPIO descriptor API from Linus
  Walleij.

  Since GPIO descriptors were used by platform data this means there's a
  few changes in arch/ making relevant updates for a few platforms and
  one misc driver that are affected"

* tag 'spi-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (24 commits)
  MAINTAINERS: update Andi's e-mail
  spi: spi-atmel: Use correct enum for DMA transfer direction
  spi: sh-msiof: Document R-Car M3-N support
  spi: sh-msiof: Use correct enum for DMA transfer direction
  spi: sprd: Add the support of restarting the system
  spi: sprd: Simplify the transfer function
  spi: Fix unregistration of controller with fixed SPI bus number
  spi: rspi: use correct enum for DMA transfer direction
  spi: jcore: disable ref_clk after getting its rate
  spi: bcm-qspi: fIX some error handling paths
  spi: pxa2xx: Disable runtime PM if controller registration fails
  spi: tegra20-slink: use true and false for boolean values
  spi: Fix scatterlist elements size in spi_map_buf
  spi: atmel: init FIFOs before spi enable
  spi: orion: Prepare space for per-child options
  spi: orion: Make the error message greppable
  spi: orion: Rework GPIO CS handling
  spi: bcm2835aux: Avoid 64-bit arithmetic in xfer len calc
  spi: spi-gpio: Augment device tree bindings
  spi: spi-gpio: Rewrite to use GPIO descriptors
  ...

Pull regulator updates from Mark Brown:
 "A very small set of updates for the regulator API this time around,
  there's a few bug fixes and also:

   - Conversion of the regulator API to use GPIO descriptors rather than
     numbers from Linus Walleij.

   - New drivers for Marvell 88PG86x and Qualcomm PM8998 and PMI8998"

* tag 'regulator-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom: smd: Add pm8998 and pmi8998 regulators
  regulator: core: Add missing blank line between functions
  regulator: qcom_smd: Drop regulator/{machine,of_regulator} includes
  regulator: giving regulator controlling gpios a non-empty label when used through the devicetree.
  regulator: gpio: Fix some error handling paths in 'gpio_regulator_probe()'
  regulator: 88pg86x: new i2c dual regulator chip
  regulator: 88pg86x: add DT bindings document
  regulator: da9211: Pass descriptors instead of GPIO numbers
  regulator: da9055: Pass descriptor instead of GPIO number
  regulator: core: Support passing an initialized GPIO enable descriptor
  regulator: dt: regulator-name is required property
  regulator: of: Add a missing 'of_node_put()' in an error handling path of 'of_regulator_match()'

Pull regmap updates from Mark Brown:
 "This is a fairly large set of updates for regmap, mainly bugfixes.

  The biggest bit of this is some fixes for the bulk operations code
  which had issues in some use cases, Charles Keepax has sorted them
  out. We also gained the ability to use debugfs with syscon regmaps and
  to specify the clock to be used with MMIO regmaps"

* tag 'regmap-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (21 commits)
  regmap: debugfs: Improve warning message on debugfs_create_dir() failure
  regmap: debugfs: Free map->debugfs_name when debugfs_create_dir() failed
  regmap: debugfs: Don't leak dummy names
  regmap: debugfs: Disambiguate dummy debugfs file name
  regmap: mmio: Add function to attach a clock
  regmap: Merge redundant handling in regmap_bulk_write
  regmap: Tidy up regmap_raw_write chunking code
  regmap: Move the handling for max_raw_write into regmap_raw_write
  regmap: Remove unnecessary printk for failed allocation
  regmap: Format data for raw write in regmap_bulk_write
  regmap: use debugfs even when no device
  regmap: Allow missing device in regmap_name_read_file()
  regmap: Use _regmap_read in regmap_bulk_read
  regmap: Tidy up regmap_raw_read chunking code
  regmap: Move the handling for max_raw_read into regmap_raw_read
  regmap: Use helper function for register offset
  regmap: Don't use format_val in regmap_bulk_read
  regmap: Correct comparison in regmap_cached
  regmap: Correct offset handling in regmap_volatile_range
  regmap-i2c: Off by one in regmap_i2c_smbus_i2c_read/write()
  ...

Pull power management updates from Rafael Wysocki:
 "These update the cpuidle poll state definition to reduce excessive
  energy usage related to it, add new CPU ID to the RAPL power capping
  driver, update the ACPI system suspend code to handle some special
  cases better, extend the PM core's device links code slightly, add new
  sysfs attribute for better suspend-to-idle diagnostics and easier
  hibernation handling, update power management tools and clean up
  cpufreq quite a bit.

  Specifics:

   - Modify the cpuidle poll state implementation to prevent CPUs from
     staying in the loop in there for excessive times (Rafael Wysocki).

   - Add Intel Cannon Lake chips support to the RAPL power capping
     driver (Joe Konno).

   - Add reference counting to the device links handling code in the PM
     core (Lukas Wunner).

   - Avoid reconfiguring GPEs on suspend-to-idle in the ACPI system
     suspend code (Rafael Wysocki).

   - Allow devices to be put into deeper low-power states via ACPI if
     both _SxD and _SxW are missing (Daniel Drake).

   - Reorganize the core ACPI suspend-to-idle wakeup code to avoid a
     keyboard wakeup issue on Asus UX331UA (Chris Chiu).

   - Prevent the PCMCIA library code from aborting suspend-to-idle due
     to noirq suspend failures resulting from incorrect assumptions
     (Rafael Wysocki).

   - Add coupled cpuidle supprt to the Exynos3250 platform (Marek
     Szyprowski).

   - Add new sysfs file to make it easier to specify the image storage
     location during hibernation (Mario Limonciello).

   - Add sysfs files for collecting suspend-to-idle usage and time
     statistics for CPU idle states (Rafael Wysocki).

   - Update the pm-graph utilities (Todd Brandt).

   - Reduce the kernel log noise related to reporting Low-power Idle
     constraings by the ACPI system suspend code (Rafael Wysocki).

   - Make it easier to distinguish dedicated wakeup IRQs in the
     /proc/interrupts output (Tony Lindgren).

   - Add the frequency table validation in cpufreq to the core and drop
     it from a number of cpufreq drivers (Viresh Kumar).

   - Drop "cooling-{min|max}-level" for CPU nodes from a couple of DT
     bindings (Viresh Kumar).

   - Clean up the CPU online error code path in the cpufreq core (Viresh
     Kumar).

   - Fix assorted issues in the SCPI, CPPC, mediatek and tegra186
     cpufreq drivers (Arnd Bergmann, Chunyu Hu, George Cherian, Viresh
     Kumar).

   - Drop memory allocation error messages from a few places in cpufreq
     and cpuildle drivers (Markus Elfring)"

* tag 'pm-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
  ACPI / PM: Fix keyboard wakeup from suspend-to-idle on ASUS UX331UA
  cpufreq: CPPC: Use transition_delay_us depending transition_latency
  PM / hibernate: Change message when writing to /sys/power/resume
  PM / hibernate: Make passing hibernate offsets more friendly
  cpuidle: poll_state: Avoid invoking local_clock() too often
  PM: cpuidle/suspend: Add s2idle usage and time state attributes
  cpuidle: Enable coupled cpuidle support on Exynos3250 platform
  cpuidle: poll_state: Add time limit to poll_idle()
  cpufreq: tegra186: Don't validate the frequency table twice
  cpufreq: speedstep: Don't validate the frequency table twice
  cpufreq: sparc: Don't validate the frequency table twice
  cpufreq: sh: Don't validate the frequency table twice
  cpufreq: sfi: Don't validate the frequency table twice
  cpufreq: scpi: Don't validate the frequency table twice
  cpufreq: sc520: Don't validate the frequency table twice
  cpufreq: s3c24xx: Don't validate the frequency table twice
  cpufreq: qoirq: Don't validate the frequency table twice
  cpufreq: pxa: Don't validate the frequency table twice
  cpufreq: ppc_cbe: Don't validate the frequency table twice
  cpufreq: powernow: Don't validate the frequency table twice
  ...

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to follow upstream revision
  20180313 which includes fixes related to the so-called module-level
  AML (mostly "if" type of statements outside of any methods) that
  should improve the handling of systems that load alternative SSDTs
  depending on the current configuration, for example, and event
  handling fixes related to disabling and enabling GPEs on system
  startup and on suspend/resume.

  Moreover, the ACPICA license boilerplate is replaced with SPDX license
  IDs which alone reduces the number of lines of ACPICA code in the
  kernel quite a bit.

  Also added is a new driver for the generic ACPI Time and Alarm Device
  (TAD). At the moment it only handles the most basic capabilities of
  the TAD, however.

  In addition to that the ACPI battery driver is improved to handle
  battery thresholds on ThinkPads, among other things, some bugs are
  fixed, a new backlight quirk is added and some documentation is
  updated.

  Specifics:

   - Update the in-kernel ACPICA code to upstream revision 20180313
     including:
      * Module-level AML code handling fixes and simplifications (Bob
        Moore, Erik Schmauss).
      * Fixes and cleanups related to messaging (Bob Moore).
      * Events handling fixes related to disabling and enabling GPEs
        (Erik Schmauss).
      * Introduction of SPDX license identifiers and removal of license
        boilerplate in multiple files (Erik Schmauss).
      * Assorted fixes and cleanups (Bob Moore, Erik Schmauss, Hans de
        Goede, Seunghun Han).

   - Add new basic driver for the ACPI Time and Alarm Device (Rafael
     Wysocki).

   - Modify the ACPI battery driver to support battery thresholds on
     Lenovo ThinkPads (Ognjen Galic, Colin Ian King).

   - Avoid reporting battery capacity over 100 in the ACPI battery
     driver in some cases (Laszlo Toth).

   - Make the kernel recognize an OEM _OSI string from Dell to avoid
     power management issues with NVidia GPUs in Dell platforms (Alex
     Hung).

   - Make the PCI IRQ management code handle missing _PRS cleanly (Alex
     Hung).

   - Fix uevent notifications related to device hotplut (Lee, Chun-Yi).

   - Prevent the ACPI PAD driver from leaking memory (Lenny Szubowicz).

   - Update the ACPI CPPC library code to include subspace IDs in the
     kernel messages logged by it (George Cherian).

   - Add backlight quirk for Samsung 670Z5E (Hans de Goede).

   - Add the NFIT and HMAT tables to the list of ACPI tables that can be
     overridden via initrd (Dan Williams).

   - Fix and clean up some ACPI documentation and Kconfig help language
     (Aishwarya Pant, Randy Dunlap).

   - Replace license boilerplate with an SPDX license ID in the ACPI
     PMIC operation region handling code (Rajmohan Mani)"

* tag 'acpi-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  ACPI: acpi_pad: Fix memory leak in power saving threads
  ACPI / video: Add quirk to force acpi-video backlight on Samsung 670Z5E
  ACPI: Add Time and Alarm Device (TAD) driver
  ACPI / scan: Send change uevent with offine environmental data
  ACPI / Kconfig: Update ACPI_PROCFS_POWER help text
  ACPI / OSI: Add OEM _OSI strings to disable NVidia RTD3
  ACPICA: Update version to 20180313
  ACPICA: Cleanup/simplify module-level code support
  ACPICA: Events: add a return on failure from acpi_hw_register_read
  ACPICA: adding SPDX headers
  ACPICA: Rename a global for clarity, no functional change
  ACPICA: macros: fix ACPI_ERROR_NAMESPACE macro
  ACPICA: Change a compile-time option to a runtime option
  ACPICA: Remove calling of _STA from acpi_get_object_info()
  ACPICA: AML Debug Object: Don't ignore output of zero-length strings
  ACPICA: Fix memory leak on unusual memory leak
  ACPICA: Events: Dispatch GPEs after enabling for the first time
  ACPICA: Events: Add parallel GPE handling support to fix potential redundant _Exx evaluations
  ACPICA: Events: Stop unconditionally clearing ACPI IRQs during suspend/resume
  ACPICA: acpi: acpica: fix acpi operand cache leak in nseval.c
  ...

This avoids a lot of -Wunused warnings such as:

====================
kernel/debug/debug_core.c: In function ‘kgdb_cpu_enter’:
./arch/sparc/include/asm/cmpxchg_64.h:55:22: warning: value computed is not used [-Wunused-value]
 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))

./arch/sparc/include/asm/atomic_64.h:86:30: note: in expansion of macro ‘xchg’
 #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
                              ^~~~
kernel/debug/debug_core.c:508:4: note: in expansion of macro ‘atomic_xchg’
    atomic_xchg(&kgdb_active, cpu);
    ^~~~~~~~~~~
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>