diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index 718578f640691c2e9b692c1b98acf53e6d7b5ca1..dcf9e9e2b2897a56fe78246535167342993b0135 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -50,9 +50,9 @@ config BOARD_ATSTK1002_SPI1
 	  GPIO lines and accessed through the J1 jumper block.  Say "y"
 	  here to configure that SPI controller.
 
-config BOARD_ATSTK1002_J2_LED
+config BOARD_ATSTK1000_J2_LED
 	bool
-	default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
+	default BOARD_ATSTK1000_J2_LED8 || BOARD_ATSTK1000_J2_RGB
 
 choice
 	prompt "LEDs connected to J2:"
@@ -64,12 +64,12 @@ choice
 	  IDC cable.  A default "heartbeat" trigger is provided, but
 	  you can of course override this.
 
-config BOARD_ATSTK1002_J2_LED8
+config BOARD_ATSTK1000_J2_LED8
 	bool "LED0..LED7"
 	help
 	  Select this if J2 is jumpered to LED0..LED7 amber leds.
 
-config BOARD_ATSTK1002_J2_RGB
+config BOARD_ATSTK1000_J2_RGB
 	bool "RGB leds"
 	help
 	  Select this if J2 is jumpered to the RGB leds.
diff --git a/arch/avr32/boards/atstk1000/atstk1000.h b/arch/avr32/boards/atstk1000/atstk1000.h
index 9a49ed036b72bd9660aca6f5ef5153fd6603ae28..9392d3252865a6886025167fe151e7356acf8f64 100644
--- a/arch/avr32/boards/atstk1000/atstk1000.h
+++ b/arch/avr32/boards/atstk1000/atstk1000.h
@@ -12,4 +12,6 @@
 
 extern struct atmel_lcdfb_info atstk1000_lcdc_data;
 
+void atstk1000_setup_j2_leds(void);
+
 #endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 5be0d13f4b03c53d8d843d9a698b885361d98bc0..2481d2389873d45de60f700f90eb440b4081ddfe 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -11,7 +11,6 @@
 #include <linux/etherdevice.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/types.h>
@@ -22,7 +21,7 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/arch/at32ap7000.h>
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
 #include <asm/arch/init.h>
 #include <asm/arch/portmux.h>
@@ -141,65 +140,6 @@ static void __init set_hw_addr(struct platform_device *pdev)
 	clk_put(pclk);
 }
 
-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
-
-static struct gpio_led stk_j2_led[] = {
-#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
-#define LEDSTRING "J2 jumpered to LED8"
-	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
-	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
-	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
-	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
-	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
-	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
-	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
-			.default_trigger = "heartbeat", },
-#else	/* RGB */
-#define LEDSTRING "J2 jumpered to RGB LEDs"
-	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
-	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
-	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
-
-	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
-			.default_trigger = "heartbeat", },
-	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
-	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
-			.default_trigger = "heartbeat", },
-	/* PB16, PB30 unused */
-#endif
-};
-
-static struct gpio_led_platform_data stk_j2_led_data = {
-	.num_leds	= ARRAY_SIZE(stk_j2_led),
-	.leds		= stk_j2_led,
-};
-
-static struct platform_device stk_j2_led_dev = {
-	.name		= "leds-gpio",
-	.id		= 2,	/* gpio block J2 */
-	.dev		= {
-		.platform_data	= &stk_j2_led_data,
-	},
-};
-
-static void setup_j2_leds(void)
-{
-	unsigned	i;
-
-	for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
-		at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
-
-	printk("STK1002: " LEDSTRING "\n");
-	platform_device_register(&stk_j2_led_dev);
-}
-
-#else
-static void setup_j2_leds(void)
-{
-}
-#endif
-
 #ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
 #ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
 static void __init at73c213_set_clk(struct at73c213_board_info *info)
@@ -298,7 +238,7 @@ static int __init atstk1002_init(void)
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
 #endif
 
-	setup_j2_leds();
+	atstk1000_setup_j2_leds();
 
 #ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
 #ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index c9af409ada9a99723217e0d29456cec470122b75..8bedf93876a377050cdb491643edbb9da45114ae 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -10,13 +10,17 @@
 #include <linux/bootmem.h>
 #include <linux/fb.h>
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <linux/types.h>
 #include <linux/linkage.h>
 
 #include <video/atmel_lcdc.h>
 
 #include <asm/setup.h>
+
+#include <asm/arch/at32ap700x.h>
 #include <asm/arch/board.h>
+#include <asm/arch/portmux.h>
 
 #include "atstk1000.h"
 
@@ -61,3 +65,63 @@ struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
 	.default_monspecs	= &atstk1000_default_monspecs,
 	.guard_time		= 2,
 };
+
+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED
+#include <linux/leds.h>
+
+static struct gpio_led stk1000_j2_led[] = {
+#ifdef CONFIG_BOARD_ATSTK1000_J2_LED8
+#define LEDSTRING "J2 jumpered to LED8"
+	{ .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
+	{ .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
+	{ .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
+	{ .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
+	{ .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
+	{ .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
+	{ .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
+	{ .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
+			.default_trigger = "heartbeat", },
+#else	/* RGB */
+#define LEDSTRING "J2 jumpered to RGB LEDs"
+	{ .name = "r1:red",     .gpio = GPIO_PIN_PB( 8), },
+	{ .name = "g1:green",   .gpio = GPIO_PIN_PB(10), },
+	{ .name = "b1:blue",    .gpio = GPIO_PIN_PB(14), },
+
+	{ .name = "r2:red",     .gpio = GPIO_PIN_PB( 9),
+			.default_trigger = "heartbeat", },
+	{ .name = "g2:green",   .gpio = GPIO_PIN_PB(13), },
+	{ .name = "b2:blue",    .gpio = GPIO_PIN_PB(15),
+			.default_trigger = "heartbeat", },
+	/* PB16, PB30 unused */
+#endif
+};
+
+static struct gpio_led_platform_data stk1000_j2_led_data = {
+	.num_leds	= ARRAY_SIZE(stk1000_j2_led),
+	.leds		= stk1000_j2_led,
+};
+
+static struct platform_device stk1000_j2_led_dev = {
+	.name		= "leds-gpio",
+	.id		= 2,	/* gpio block J2 */
+	.dev		= {
+		.platform_data	= &stk1000_j2_led_data,
+	},
+};
+
+void __init atstk1000_setup_j2_leds(void)
+{
+	unsigned	i;
+
+	for (i = 0; i < ARRAY_SIZE(stk1000_j2_led); i++)
+		at32_select_gpio(stk1000_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+
+	printk("STK1000: " LEDSTRING "\n");
+	platform_device_register(&stk1000_j2_led_dev);
+}
+#else /* CONFIG_BOARD_ATSTK1000_J2_LED */
+void __init atstk1000_setup_j2_leds(void)
+{
+
+}
+#endif /* CONFIG_BOARD_ATSTK1000_J2_LED */