diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 088f32f29a6e9fa9b1563b765394539537c5ba30..050ee147592fcd39b66641ad0bf2e41d53713487 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -396,8 +396,8 @@ config SBC_FITPC2_WATCHDOG
 	tristate "Compulab SBC-FITPC2 watchdog"
 	depends on X86
 	---help---
-	  This is the driver for the built-in watchdog timer on the fit-PC2
-	  Single-board computer made by Compulab.
+	  This is the driver for the built-in watchdog timer on the fit-PC2,
+	  fit-PC2i, CM-iAM single-board computers made by Compulab.
 
 	  It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
 	  When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
diff --git a/drivers/watchdog/sbc_fitpc2_wdt.c b/drivers/watchdog/sbc_fitpc2_wdt.c
index 91430a89107c0ce0f31f9a2d92edac9ac5c8d893..e6763d2a567b92eb43beb1e236daa282d6662a50 100644
--- a/drivers/watchdog/sbc_fitpc2_wdt.c
+++ b/drivers/watchdog/sbc_fitpc2_wdt.c
@@ -46,9 +46,9 @@ static DEFINE_SPINLOCK(wdt_lock);
 static void wdt_send_data(unsigned char command, unsigned char data)
 {
 	outb(command, COMMAND_PORT);
-	mdelay(100);
+	msleep(100);
 	outb(data, DATA_PORT);
-	mdelay(200);
+	msleep(200);
 }
 
 static void wdt_enable(void)
@@ -202,11 +202,10 @@ static int __init fitpc2_wdt_init(void)
 {
 	int err;
 
-	if (strcmp("SBC-FITPC2", dmi_get_system_info(DMI_BOARD_NAME))) {
-		pr_info("board name is: %s. Should be SBC-FITPC2\n",
-			dmi_get_system_info(DMI_BOARD_NAME));
+	if (!strstr(dmi_get_system_info(DMI_BOARD_NAME), "SBC-FITPC2"))
 		return -ENODEV;
-	}
+
+	pr_info("%s found\n", dmi_get_system_info(DMI_BOARD_NAME));
 
 	if (!request_region(COMMAND_PORT, 1, WATCHDOG_NAME)) {
 		pr_err("I/O address 0x%04x already in use\n", COMMAND_PORT);