提交 eb0d0ee1 编写于 作者: T Tony Lindgren

ARM: OMAP2/3: Remove OMAP_CM_REGADDR

Processor specific macros should be used instead.
Signed-off-by: NTony Lindgren <tony@atomide.com>
上级 c28150ee
......@@ -26,9 +26,11 @@
/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
#ifdef CONFIG_ARCH_OMAP2420
#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
#else
#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
#endif
......
......@@ -27,6 +27,8 @@
#include "prm.h"
#include "prm-regbits-34xx.h"
#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR
static unsigned long omap3_dpll_recalc(struct clk *clk);
static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
......
......@@ -16,17 +16,12 @@
#include "prcm-common.h"
#ifndef __ASSEMBLER__
#define OMAP_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
#endif
/*
* Architecture-specific global CM registers
......
......@@ -85,15 +85,5 @@
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
#if defined(CONFIG_ARCH_OMAP2420)
#define OMAP2_CM_BASE OMAP2420_CM_BASE
#elif defined(CONFIG_ARCH_OMAP2430)
#define OMAP2_CM_BASE OMAP2430_CM_BASE
#endif
#endif /* __ASM_ARCH_OMAP24XX_H */
......@@ -83,12 +83,6 @@
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
#if defined(CONFIG_ARCH_OMAP3430)
#define OMAP2_CM_BASE OMAP3430_CM_BASE
#endif
#define OMAP34XX_DSP_BASE 0x58000000
#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册