diff --git a/Documentation/gpio.txt b/Documentation/gpio.txt index c35ca9e40d4ca8ae0cbf7c06c639d8531ae8d9dd..8b69811a964249c7b346eefa7c316f5e7985e910 100644 --- a/Documentation/gpio.txt +++ b/Documentation/gpio.txt @@ -347,15 +347,12 @@ necessarily be nonportable. Dynamic definition of GPIOs is not currently standard; for example, as a side effect of configuring an add-on board with some GPIO expanders. -These calls are purely for kernel space, but a userspace API could be built -on top of them. - GPIO implementor's framework (OPTIONAL) ======================================= As noted earlier, there is an optional implementation framework making it easier for platforms to support different kinds of GPIO controller using -the same programming interface. +the same programming interface. This framework is called "gpiolib". As a debugging aid, if debugfs is available a /sys/kernel/debug/gpio file will be found there. That will list all the controllers registered through @@ -439,4 +436,120 @@ becomes available. That may mean the device should not be registered until calls for that GPIO can work. One way to address such dependencies is for such gpio_chip controllers to provide setup() and teardown() callbacks to board specific code; those board specific callbacks would register devices -once all the necessary resources are available. +once all the necessary resources are available, and remove them later when +the GPIO controller device becomes unavailable. + + +Sysfs Interface for Userspace (OPTIONAL) +======================================== +Platforms which use the "gpiolib" implementors framework may choose to +configure a sysfs user interface to GPIOs. This is different from the +debugfs interface, since it provides control over GPIO direction and +value instead of just showing a gpio state summary. Plus, it could be +present on production systems without debugging support. + +Given approprate hardware documentation for the system, userspace could +know for example that GPIO #23 controls the write protect line used to +protect boot loader segments in flash memory. System upgrade procedures +may need to temporarily remove that protection, first importing a GPIO, +then changing its output state, then updating the code before re-enabling +the write protection. In normal use, GPIO #23 would never be touched, +and the kernel would have no need to know about it. + +Again depending on appropriate hardware documentation, on some systems +userspace GPIO can be used to determine system configuration data that +standard kernels won't know about. And for some tasks, simple userspace +GPIO drivers could be all that the system really needs. + +Note that standard kernel drivers exist for common "LEDs and Buttons" +GPIO tasks: "leds-gpio" and "gpio_keys", respectively. Use those +instead of talking directly to the GPIOs; they integrate with kernel +frameworks better than your userspace code could. + + +Paths in Sysfs +-------------- +There are three kinds of entry in /sys/class/gpio: + + - Control interfaces used to get userspace control over GPIOs; + + - GPIOs themselves; and + + - GPIO controllers ("gpio_chip" instances). + +That's in addition to standard files including the "device" symlink. + +The control interfaces are write-only: + + /sys/class/gpio/ + + "export" ... Userspace may ask the kernel to export control of + a GPIO to userspace by writing its number to this file. + + Example: "echo 19 > export" will create a "gpio19" node + for GPIO #19, if that's not requested by kernel code. + + "unexport" ... Reverses the effect of exporting to userspace. + + Example: "echo 19 > unexport" will remove a "gpio19" + node exported using the "export" file. + +GPIO signals have paths like /sys/class/gpio/gpio42/ (for GPIO #42) +and have the following read/write attributes: + + /sys/class/gpio/gpioN/ + + "direction" ... reads as either "in" or "out". This value may + normally be written. Writing as "out" defaults to + initializing the value as low. To ensure glitch free + operation, values "low" and "high" may be written to + configure the GPIO as an output with that initial value. + + Note that this attribute *will not exist* if the kernel + doesn't support changing the direction of a GPIO, or + it was exported by kernel code that didn't explicitly + allow userspace to reconfigure this GPIO's direction. + + "value" ... reads as either 0 (low) or 1 (high). If the GPIO + is configured as an output, this value may be written; + any nonzero value is treated as high. + +GPIO controllers have paths like /sys/class/gpio/chipchip42/ (for the +controller implementing GPIOs starting at #42) and have the following +read-only attributes: + + /sys/class/gpio/gpiochipN/ + + "base" ... same as N, the first GPIO managed by this chip + + "label" ... provided for diagnostics (not always unique) + + "ngpio" ... how many GPIOs this manges (N to N + ngpio - 1) + +Board documentation should in most cases cover what GPIOs are used for +what purposes. However, those numbers are not always stable; GPIOs on +a daughtercard might be different depending on the base board being used, +or other cards in the stack. In such cases, you may need to use the +gpiochip nodes (possibly in conjunction with schematics) to determine +the correct GPIO number to use for a given signal. + + +Exporting from Kernel code +-------------------------- +Kernel code can explicitly manage exports of GPIOs which have already been +requested using gpio_request(): + + /* export the GPIO to userspace */ + int gpio_export(unsigned gpio, bool direction_may_change); + + /* reverse gpio_export() */ + void gpio_unexport(); + +After a kernel driver requests a GPIO, it may only be made available in +the sysfs interface by gpio_export(). The driver can control whether the +signal direction may change. This helps drivers prevent userspace code +from accidentally clobbering important system state. + +This explicit exporting can help with debugging (by making some kinds +of experiments easier), or can provide an always-there interface that's +suitable for documenting as part of a board support package. diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 1903a3491ee9ff7f330e90a3c9a7df5cd4897d22..d8e9c2c3f0f684ad8d9375744a36579363497d37 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void) bank->chip.set = gpio_set; if (bank_is_mpuio(bank)) { bank->chip.label = "mpuio"; +#ifdef CONFIG_ARCH_OMAP1 + bank->chip.dev = &omap_mpuio_device.dev; +#endif bank->chip.base = OMAP_MPUIO(0); } else { bank->chip.label = "gpio"; diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c index 60da03ba7117e0c9a62ad4756ac5fa0aecf7d756..296294f8ed81c42a92963c7794f3a39897e9fa81 100644 --- a/arch/avr32/mach-at32ap/pio.c +++ b/arch/avr32/mach-at32ap/pio.c @@ -360,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev) pio->chip.label = pio->name; pio->chip.base = pdev->id * 32; pio->chip.ngpio = 32; + pio->chip.dev = &pdev->dev; + pio->chip.owner = THIS_MODULE; pio->chip.direction_input = direction_input; pio->chip.get = gpio_get; diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index fced1909cbba0dd055c2a01cd73fc5303138750b..6ec0e35b98e32739cd8fad5fa78716d99fdb6727 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -23,6 +23,21 @@ config DEBUG_GPIO slower. The diagnostics help catch the type of setup errors that are most common when setting up new platforms or boards. +config GPIO_SYSFS + bool "/sys/class/gpio/... (sysfs interface)" + depends on SYSFS && EXPERIMENTAL + help + Say Y here to add a sysfs interface for GPIOs. + + This is mostly useful to work around omissions in a system's + kernel support. Those are common in custom and semicustom + hardware assembled using standard kernels with a minimum of + custom patches. In those cases, userspace code may import + a given GPIO from the kernel, if no kernel driver requested it. + + Kernel drivers may also request that a particular GPIO be + exported to userspace; this can be useful when debugging. + # put expanders in the right section, in alphabetical order comment "I2C GPIO expanders:" diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index beaf6b3a37dcefb0b2c1d8c8f79b7db2713dba45..8d2940517c99221c33e3bf200ac53a82214cebee 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2,8 +2,11 @@ #include #include #include - -#include +#include +#include +#include +#include +#include /* Optional implementation infrastructure for GPIO interfaces. @@ -44,6 +47,8 @@ struct gpio_desc { #define FLAG_REQUESTED 0 #define FLAG_IS_OUT 1 #define FLAG_RESERVED 2 +#define FLAG_EXPORT 3 /* protected by sysfs_lock */ +#define FLAG_SYSFS 4 /* exported via /sys/class/gpio/control */ #ifdef CONFIG_DEBUG_FS const char *label; @@ -151,6 +156,482 @@ int __init gpiochip_reserve(int start, int ngpio) return ret; } +#ifdef CONFIG_GPIO_SYSFS + +/* lock protects against unexport_gpio() being called while + * sysfs files are active. + */ +static DEFINE_MUTEX(sysfs_lock); + +/* + * /sys/class/gpio/gpioN... only for GPIOs that are exported + * /direction + * * MAY BE OMITTED if kernel won't allow direction changes + * * is read/write as "in" or "out" + * * may also be written as "high" or "low", initializing + * output value as specified ("out" implies "low") + * /value + * * always readable, subject to hardware behavior + * * may be writable, as zero/nonzero + * + * REVISIT there will likely be an attribute for configuring async + * notifications, e.g. to specify polling interval or IRQ trigger type + * that would for example trigger a poll() on the "value". + */ + +static ssize_t gpio_direction_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_desc *desc = dev_get_drvdata(dev); + ssize_t status; + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else + status = sprintf(buf, "%s\n", + test_bit(FLAG_IS_OUT, &desc->flags) + ? "out" : "in"); + + mutex_unlock(&sysfs_lock); + return status; +} + +static ssize_t gpio_direction_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + const struct gpio_desc *desc = dev_get_drvdata(dev); + unsigned gpio = desc - gpio_desc; + ssize_t status; + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else if (sysfs_streq(buf, "high")) + status = gpio_direction_output(gpio, 1); + else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low")) + status = gpio_direction_output(gpio, 0); + else if (sysfs_streq(buf, "in")) + status = gpio_direction_input(gpio); + else + status = -EINVAL; + + mutex_unlock(&sysfs_lock); + return status ? : size; +} + +static const DEVICE_ATTR(direction, 0644, + gpio_direction_show, gpio_direction_store); + +static ssize_t gpio_value_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_desc *desc = dev_get_drvdata(dev); + unsigned gpio = desc - gpio_desc; + ssize_t status; + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else + status = sprintf(buf, "%d\n", gpio_get_value_cansleep(gpio)); + + mutex_unlock(&sysfs_lock); + return status; +} + +static ssize_t gpio_value_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t size) +{ + const struct gpio_desc *desc = dev_get_drvdata(dev); + unsigned gpio = desc - gpio_desc; + ssize_t status; + + mutex_lock(&sysfs_lock); + + if (!test_bit(FLAG_EXPORT, &desc->flags)) + status = -EIO; + else if (!test_bit(FLAG_IS_OUT, &desc->flags)) + status = -EPERM; + else { + long value; + + status = strict_strtol(buf, 0, &value); + if (status == 0) { + gpio_set_value_cansleep(gpio, value != 0); + status = size; + } + } + + mutex_unlock(&sysfs_lock); + return status; +} + +static /*const*/ DEVICE_ATTR(value, 0644, + gpio_value_show, gpio_value_store); + +static const struct attribute *gpio_attrs[] = { + &dev_attr_direction.attr, + &dev_attr_value.attr, + NULL, +}; + +static const struct attribute_group gpio_attr_group = { + .attrs = (struct attribute **) gpio_attrs, +}; + +/* + * /sys/class/gpio/gpiochipN/ + * /base ... matching gpio_chip.base (N) + * /label ... matching gpio_chip.label + * /ngpio ... matching gpio_chip.ngpio + */ + +static ssize_t chip_base_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_chip *chip = dev_get_drvdata(dev); + + return sprintf(buf, "%d\n", chip->base); +} +static DEVICE_ATTR(base, 0444, chip_base_show, NULL); + +static ssize_t chip_label_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_chip *chip = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", chip->label ? : ""); +} +static DEVICE_ATTR(label, 0444, chip_label_show, NULL); + +static ssize_t chip_ngpio_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const struct gpio_chip *chip = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", chip->ngpio); +} +static DEVICE_ATTR(ngpio, 0444, chip_ngpio_show, NULL); + +static const struct attribute *gpiochip_attrs[] = { + &dev_attr_base.attr, + &dev_attr_label.attr, + &dev_attr_ngpio.attr, + NULL, +}; + +static const struct attribute_group gpiochip_attr_group = { + .attrs = (struct attribute **) gpiochip_attrs, +}; + +/* + * /sys/class/gpio/export ... write-only + * integer N ... number of GPIO to export (full access) + * /sys/class/gpio/unexport ... write-only + * integer N ... number of GPIO to unexport + */ +static ssize_t export_store(struct class *class, const char *buf, size_t len) +{ + long gpio; + int status; + + status = strict_strtol(buf, 0, &gpio); + if (status < 0) + goto done; + + /* No extra locking here; FLAG_SYSFS just signifies that the + * request and export were done by on behalf of userspace, so + * they may be undone on its behalf too. + */ + + status = gpio_request(gpio, "sysfs"); + if (status < 0) + goto done; + + status = gpio_export(gpio, true); + if (status < 0) + gpio_free(gpio); + else + set_bit(FLAG_SYSFS, &gpio_desc[gpio].flags); + +done: + if (status) + pr_debug("%s: status %d\n", __func__, status); + return status ? : len; +} + +static ssize_t unexport_store(struct class *class, const char *buf, size_t len) +{ + long gpio; + int status; + + status = strict_strtol(buf, 0, &gpio); + if (status < 0) + goto done; + + status = -EINVAL; + + /* reject bogus commands (gpio_unexport ignores them) */ + if (!gpio_is_valid(gpio)) + goto done; + + /* No extra locking here; FLAG_SYSFS just signifies that the + * request and export were done by on behalf of userspace, so + * they may be undone on its behalf too. + */ + if (test_and_clear_bit(FLAG_SYSFS, &gpio_desc[gpio].flags)) { + status = 0; + gpio_free(gpio); + } +done: + if (status) + pr_debug("%s: status %d\n", __func__, status); + return status ? : len; +} + +static struct class_attribute gpio_class_attrs[] = { + __ATTR(export, 0200, NULL, export_store), + __ATTR(unexport, 0200, NULL, unexport_store), + __ATTR_NULL, +}; + +static struct class gpio_class = { + .name = "gpio", + .owner = THIS_MODULE, + + .class_attrs = gpio_class_attrs, +}; + + +/** + * gpio_export - export a GPIO through sysfs + * @gpio: gpio to make available, already requested + * @direction_may_change: true if userspace may change gpio direction + * Context: arch_initcall or later + * + * When drivers want to make a GPIO accessible to userspace after they + * have requested it -- perhaps while debugging, or as part of their + * public interface -- they may use this routine. If the GPIO can + * change direction (some can't) and the caller allows it, userspace + * will see "direction" sysfs attribute which may be used to change + * the gpio's direction. A "value" attribute will always be provided. + * + * Returns zero on success, else an error. + */ +int gpio_export(unsigned gpio, bool direction_may_change) +{ + unsigned long flags; + struct gpio_desc *desc; + int status = -EINVAL; + + /* can't export until sysfs is available ... */ + if (!gpio_class.p) { + pr_debug("%s: called too early!\n", __func__); + return -ENOENT; + } + + if (!gpio_is_valid(gpio)) + goto done; + + mutex_lock(&sysfs_lock); + + spin_lock_irqsave(&gpio_lock, flags); + desc = &gpio_desc[gpio]; + if (test_bit(FLAG_REQUESTED, &desc->flags) + && !test_bit(FLAG_EXPORT, &desc->flags)) { + status = 0; + if (!desc->chip->direction_input + || !desc->chip->direction_output) + direction_may_change = false; + } + spin_unlock_irqrestore(&gpio_lock, flags); + + if (status == 0) { + struct device *dev; + + dev = device_create(&gpio_class, desc->chip->dev, MKDEV(0, 0), + desc, "gpio%d", gpio); + if (dev) { + if (direction_may_change) + status = sysfs_create_group(&dev->kobj, + &gpio_attr_group); + else + status = device_create_file(dev, + &dev_attr_value); + if (status != 0) + device_unregister(dev); + } else + status = -ENODEV; + if (status == 0) + set_bit(FLAG_EXPORT, &desc->flags); + } + + mutex_unlock(&sysfs_lock); + +done: + if (status) + pr_debug("%s: gpio%d status %d\n", __func__, gpio, status); + + return status; +} +EXPORT_SYMBOL_GPL(gpio_export); + +static int match_export(struct device *dev, void *data) +{ + return dev_get_drvdata(dev) == data; +} + +/** + * gpio_unexport - reverse effect of gpio_export() + * @gpio: gpio to make unavailable + * + * This is implicit on gpio_free(). + */ +void gpio_unexport(unsigned gpio) +{ + struct gpio_desc *desc; + int status = -EINVAL; + + if (!gpio_is_valid(gpio)) + goto done; + + mutex_lock(&sysfs_lock); + + desc = &gpio_desc[gpio]; + if (test_bit(FLAG_EXPORT, &desc->flags)) { + struct device *dev = NULL; + + dev = class_find_device(&gpio_class, NULL, desc, match_export); + if (dev) { + clear_bit(FLAG_EXPORT, &desc->flags); + put_device(dev); + device_unregister(dev); + status = 0; + } else + status = -ENODEV; + } + + mutex_unlock(&sysfs_lock); +done: + if (status) + pr_debug("%s: gpio%d status %d\n", __func__, gpio, status); +} +EXPORT_SYMBOL_GPL(gpio_unexport); + +static int gpiochip_export(struct gpio_chip *chip) +{ + int status; + struct device *dev; + + /* Many systems register gpio chips for SOC support very early, + * before driver model support is available. In those cases we + * export this later, in gpiolib_sysfs_init() ... here we just + * verify that _some_ field of gpio_class got initialized. + */ + if (!gpio_class.p) + return 0; + + /* use chip->base for the ID; it's already known to be unique */ + mutex_lock(&sysfs_lock); + dev = device_create(&gpio_class, chip->dev, MKDEV(0, 0), chip, + "gpiochip%d", chip->base); + if (dev) { + status = sysfs_create_group(&dev->kobj, + &gpiochip_attr_group); + } else + status = -ENODEV; + chip->exported = (status == 0); + mutex_unlock(&sysfs_lock); + + if (status) { + unsigned long flags; + unsigned gpio; + + spin_lock_irqsave(&gpio_lock, flags); + gpio = chip->base; + while (gpio_desc[gpio].chip == chip) + gpio_desc[gpio++].chip = NULL; + spin_unlock_irqrestore(&gpio_lock, flags); + + pr_debug("%s: chip %s status %d\n", __func__, + chip->label, status); + } + + return status; +} + +static void gpiochip_unexport(struct gpio_chip *chip) +{ + int status; + struct device *dev; + + mutex_lock(&sysfs_lock); + dev = class_find_device(&gpio_class, NULL, chip, match_export); + if (dev) { + put_device(dev); + device_unregister(dev); + chip->exported = 0; + status = 0; + } else + status = -ENODEV; + mutex_unlock(&sysfs_lock); + + if (status) + pr_debug("%s: chip %s status %d\n", __func__, + chip->label, status); +} + +static int __init gpiolib_sysfs_init(void) +{ + int status; + unsigned long flags; + unsigned gpio; + + status = class_register(&gpio_class); + if (status < 0) + return status; + + /* Scan and register the gpio_chips which registered very + * early (e.g. before the class_register above was called). + * + * We run before arch_initcall() so chip->dev nodes can have + * registered, and so arch_initcall() can always gpio_export(). + */ + spin_lock_irqsave(&gpio_lock, flags); + for (gpio = 0; gpio < ARCH_NR_GPIOS; gpio++) { + struct gpio_chip *chip; + + chip = gpio_desc[gpio].chip; + if (!chip || chip->exported) + continue; + + spin_unlock_irqrestore(&gpio_lock, flags); + status = gpiochip_export(chip); + spin_lock_irqsave(&gpio_lock, flags); + } + spin_unlock_irqrestore(&gpio_lock, flags); + + + return status; +} +postcore_initcall(gpiolib_sysfs_init); + +#else +static inline int gpiochip_export(struct gpio_chip *chip) +{ + return 0; +} + +static inline void gpiochip_unexport(struct gpio_chip *chip) +{ +} + +#endif /* CONFIG_GPIO_SYSFS */ + /** * gpiochip_add() - register a gpio_chip * @chip: the chip to register, with chip->base initialized @@ -160,6 +641,11 @@ int __init gpiochip_reserve(int start, int ngpio) * because the chip->base is invalid or already associated with a * different chip. Otherwise it returns zero as a success code. * + * When gpiochip_add() is called very early during boot, so that GPIOs + * can be freely used, the chip->dev device must be registered before + * the gpio framework's arch_initcall(). Otherwise sysfs initialization + * for GPIOs will fail rudely. + * * If chip->base is negative, this requests dynamic assignment of * a range of valid GPIOs. */ @@ -182,7 +668,7 @@ int gpiochip_add(struct gpio_chip *chip) base = gpiochip_find_base(chip->ngpio); if (base < 0) { status = base; - goto fail_unlock; + goto unlock; } chip->base = base; } @@ -197,12 +683,23 @@ int gpiochip_add(struct gpio_chip *chip) if (status == 0) { for (id = base; id < base + chip->ngpio; id++) { gpio_desc[id].chip = chip; - gpio_desc[id].flags = 0; + + /* REVISIT: most hardware initializes GPIOs as + * inputs (often with pullups enabled) so power + * usage is minimized. Linux code should set the + * gpio direction first thing; but until it does, + * we may expose the wrong direction in sysfs. + */ + gpio_desc[id].flags = !chip->direction_input + ? (1 << FLAG_IS_OUT) + : 0; } } -fail_unlock: +unlock: spin_unlock_irqrestore(&gpio_lock, flags); + if (status == 0) + status = gpiochip_export(chip); fail: /* failures here can mean systems won't boot... */ if (status) @@ -239,6 +736,10 @@ int gpiochip_remove(struct gpio_chip *chip) } spin_unlock_irqrestore(&gpio_lock, flags); + + if (status == 0) + gpiochip_unexport(chip); + return status; } EXPORT_SYMBOL_GPL(gpiochip_remove); @@ -296,6 +797,8 @@ void gpio_free(unsigned gpio) return; } + gpio_unexport(gpio); + spin_lock_irqsave(&gpio_lock, flags); desc = &gpio_desc[gpio]; @@ -534,10 +1037,6 @@ EXPORT_SYMBOL_GPL(gpio_set_value_cansleep); #ifdef CONFIG_DEBUG_FS -#include -#include - - static void gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip) { unsigned i; @@ -614,17 +1113,28 @@ static int gpiolib_show(struct seq_file *s, void *unused) /* REVISIT this isn't locked against gpio_chip removal ... */ for (gpio = 0; gpio_is_valid(gpio); gpio++) { + struct device *dev; + if (chip == gpio_desc[gpio].chip) continue; chip = gpio_desc[gpio].chip; if (!chip) continue; - seq_printf(s, "%sGPIOs %d-%d, %s%s:\n", + seq_printf(s, "%sGPIOs %d-%d", started ? "\n" : "", - chip->base, chip->base + chip->ngpio - 1, - chip->label ? : "generic", - chip->can_sleep ? ", can sleep" : ""); + chip->base, chip->base + chip->ngpio - 1); + dev = chip->dev; + if (dev) + seq_printf(s, ", %s/%s", + dev->bus ? dev->bus->name : "no-bus", + dev->bus_id); + if (chip->label) + seq_printf(s, ", %s", chip->label); + if (chip->can_sleep) + seq_printf(s, ", can sleep"); + seq_printf(s, ":\n"); + started = 1; if (chip->dbg_show) chip->dbg_show(s, chip); diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c index 7f92fdd5f0e2888b2c719e67873a5a7f0b435267..7efd7d3a81f9f927c037d25f981f47c5e45eefa2 100644 --- a/drivers/gpio/mcp23s08.c +++ b/drivers/gpio/mcp23s08.c @@ -239,6 +239,7 @@ static int mcp23s08_probe(struct spi_device *spi) mcp->chip.base = pdata->base; mcp->chip.ngpio = 8; mcp->chip.can_sleep = 1; + mcp->chip.dev = &spi->dev; mcp->chip.owner = THIS_MODULE; spi_set_drvdata(spi, mcp); diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index a380730b61abe49800af8e655eaf5735d0524ad0..cc8468692ae0967b295e196c5073fb102c4894c7 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -188,6 +188,7 @@ static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios) gc->base = chip->gpio_start; gc->ngpio = gpios; gc->label = chip->client->name; + gc->dev = &chip->client->dev; gc->owner = THIS_MODULE; } diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c index d25d356c4f200c9a197a5ac84373f7441e415e3a..fc9c6ae739ee74f8f77b8836bd5e7894001e5d9d 100644 --- a/drivers/gpio/pcf857x.c +++ b/drivers/gpio/pcf857x.c @@ -200,6 +200,7 @@ static int pcf857x_probe(struct i2c_client *client, gpio->chip.base = pdata->gpio_base; gpio->chip.can_sleep = 1; + gpio->chip.dev = &client->dev; gpio->chip.owner = THIS_MODULE; /* NOTE: the OnSemi jlc1562b is also largely compatible with diff --git a/drivers/i2c/chips/tps65010.c b/drivers/i2c/chips/tps65010.c index 85949685191bb3218e75cb5547aab3750b7e291d..cf02e8fceb42a7a1ef4ee91c42d0fb8cfdd14ecb 100644 --- a/drivers/i2c/chips/tps65010.c +++ b/drivers/i2c/chips/tps65010.c @@ -636,6 +636,8 @@ static int tps65010_probe(struct i2c_client *client, tps->outmask = board->outmask; tps->chip.label = client->name; + tps->chip.dev = &client->dev; + tps->chip.owner = THIS_MODULE; tps->chip.set = tps65010_gpio_set; tps->chip.direction_output = tps65010_output; diff --git a/drivers/mfd/htc-egpio.c b/drivers/mfd/htc-egpio.c index 8872cc0775190c296ab63bb67160b03f99cb3723..6be43172dc656911cd5c9f41f8717426e2be9e54 100644 --- a/drivers/mfd/htc-egpio.c +++ b/drivers/mfd/htc-egpio.c @@ -318,6 +318,8 @@ static int __init egpio_probe(struct platform_device *pdev) ei->chip[i].dev = &(pdev->dev); chip = &(ei->chip[i].chip); chip->label = "htc-egpio"; + chip->dev = &pdev->dev; + chip->owner = THIS_MODULE; chip->get = egpio_get; chip->set = egpio_set; chip->direction_input = egpio_direction_input; diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 6be061d09da9d06fc2dabdb520148c028194621b..1beff5166e5361e4aaf98c9422bdf835fbd84277 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -32,6 +32,8 @@ struct module; /** * struct gpio_chip - abstract a GPIO controller * @label: for diagnostics + * @dev: optional device providing the GPIOs + * @owner: helps prevent removal of modules exporting active GPIOs * @direction_input: configures signal "offset" as input, or returns error * @get: returns value for signal "offset"; for output signals this * returns either the value actually sensed, or zero @@ -59,6 +61,7 @@ struct module; */ struct gpio_chip { char *label; + struct device *dev; struct module *owner; int (*direction_input)(struct gpio_chip *chip, @@ -74,6 +77,7 @@ struct gpio_chip { int base; u16 ngpio; unsigned can_sleep:1; + unsigned exported:1; }; extern const char *gpiochip_is_requested(struct gpio_chip *chip, @@ -108,7 +112,18 @@ extern void __gpio_set_value(unsigned gpio, int value); extern int __gpio_cansleep(unsigned gpio); -#else +#ifdef CONFIG_GPIO_SYSFS + +/* + * A sysfs interface can be exported by individual drivers if they want, + * but more typically is configured entirely from userspace. + */ +extern int gpio_export(unsigned gpio, bool direction_may_change); +extern void gpio_unexport(unsigned gpio); + +#endif /* CONFIG_GPIO_SYSFS */ + +#else /* !CONFIG_HAVE_GPIO_LIB */ static inline int gpio_is_valid(int number) { @@ -137,6 +152,20 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value) gpio_set_value(gpio, value); } -#endif +#endif /* !CONFIG_HAVE_GPIO_LIB */ + +#ifndef CONFIG_GPIO_SYSFS + +/* sysfs support is only available with gpiolib, where it's optional */ + +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + return -ENOSYS; +} + +static inline void gpio_unexport(unsigned gpio) +{ +} +#endif /* CONFIG_GPIO_SYSFS */ #endif /* _ASM_GENERIC_GPIO_H */ diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 98be6c5762b923fcb2a98ced684051c3ea7f773c..730a20b83576b4ab39d81810085c20d61eec0225 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -79,6 +79,19 @@ static inline void gpio_set_value_cansleep(unsigned gpio, int value) WARN_ON(1); } +static inline int gpio_export(unsigned gpio, bool direction_may_change) +{ + /* GPIO can never have been requested or set as {in,out}put */ + WARN_ON(1); + return -EINVAL; +} + +static inline void gpio_unexport(unsigned gpio) +{ + /* GPIO can never have been exported */ + WARN_ON(1); +} + static inline int gpio_to_irq(unsigned gpio) { /* GPIO can never have been requested or set as input */