提交 b824efae 编写于 作者: T Tony Lindgren 提交者: Russell King

[ARM] 3426/1: ARM: OMAP: 1/8 Update clock framework

Patch from Tony Lindgren

Update OMAP clock framework from linux-omap tree.
The highlights of the patch are:

- Add support for omap730 clocks by Andrzej Zaborowski
- Fix compile warnings by Dirk Behme
- Add support for using dev id by Tony Lindgren and Komal Shah
- Move memory timings and PRCM into separate files by Tony Lindgren
Signed-off-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 3267c077
......@@ -345,7 +345,7 @@ static unsigned calc_ext_dsor(unsigned long rate)
*/
for (dsor = 2; dsor < 96; ++dsor) {
if ((dsor & 1) && dsor > 8)
continue;
continue;
if (rate >= 96000000 / dsor)
break;
}
......@@ -687,6 +687,11 @@ int __init omap1_clk_init(void)
clk_register(*clkp);
continue;
}
if (((*clkp)->flags &CLOCK_IN_OMAP310) && cpu_is_omap310()) {
clk_register(*clkp);
continue;
}
}
info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
......@@ -784,7 +789,7 @@ int __init omap1_clk_init(void)
clk_enable(&armxor_ck.clk);
clk_enable(&armtim_ck.clk); /* This should be done by timer code */
if (cpu_is_omap1510())
if (cpu_is_omap15xx())
clk_enable(&arm_gpio_ck);
return 0;
......
......@@ -151,7 +151,7 @@ static struct clk ck_ref = {
.name = "ck_ref",
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
......@@ -160,7 +160,7 @@ static struct clk ck_dpll1 = {
.name = "ck_dpll1",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_PROPAGATES | ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | RATE_PROPAGATES | ALWAYS_ENABLED,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
......@@ -183,7 +183,8 @@ static struct clk arm_ck = {
.name = "arm_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | RATE_PROPAGATES | ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | RATE_CKCTL | RATE_PROPAGATES |
ALWAYS_ENABLED,
.rate_offset = CKCTL_ARMDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.enable = &omap1_clk_enable_generic,
......@@ -195,7 +196,8 @@ static struct arm_idlect1_clk armper_ck = {
.name = "armper_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_CKCTL | CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | RATE_CKCTL |
CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_PERCK,
.rate_offset = CKCTL_PERDIV_OFFSET,
......@@ -209,7 +211,7 @@ static struct arm_idlect1_clk armper_ck = {
static struct clk arm_gpio_ck = {
.name = "arm_gpio_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_GPIOCK,
.recalc = &followparent_recalc,
......@@ -222,7 +224,7 @@ static struct arm_idlect1_clk armxor_ck = {
.name = "armxor_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_XORPCK,
.recalc = &followparent_recalc,
......@@ -237,7 +239,7 @@ static struct arm_idlect1_clk armtim_ck = {
.name = "armtim_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_TIMCK,
.recalc = &followparent_recalc,
......@@ -252,7 +254,7 @@ static struct arm_idlect1_clk armwdt_ck = {
.name = "armwdt_ck",
.parent = &ck_ref,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_WDTCK,
.recalc = &omap1_watchdog_recalc,
......@@ -344,9 +346,9 @@ static struct arm_idlect1_clk tc_ck = {
.name = "tc_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IN_OMAP730 | RATE_CKCTL |
RATE_PROPAGATES | ALWAYS_ENABLED |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP730 | CLOCK_IN_OMAP310 |
RATE_CKCTL | RATE_PROPAGATES |
ALWAYS_ENABLED | CLOCK_IDLE_CONTROL,
.rate_offset = CKCTL_TCDIV_OFFSET,
.recalc = &omap1_ckctl_recalc,
.enable = &omap1_clk_enable_generic,
......@@ -358,7 +360,8 @@ static struct arm_idlect1_clk tc_ck = {
static struct clk arminth_ck1510 = {
.name = "arminth_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ALWAYS_ENABLED,
.recalc = &followparent_recalc,
/* Note: On 1510 the frequency follows TC_CK
*
......@@ -372,7 +375,8 @@ static struct clk tipb_ck = {
/* No-idle controlled by "tc_ck" */
.name = "tibp_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | ALWAYS_ENABLED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ALWAYS_ENABLED,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
......@@ -417,7 +421,7 @@ static struct clk dma_ck = {
.name = "dma_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | ALWAYS_ENABLED,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
......@@ -437,7 +441,7 @@ static struct arm_idlect1_clk api_ck = {
.name = "api_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
CLOCK_IDLE_CONTROL,
CLOCK_IN_OMAP310 | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_APICK,
.recalc = &followparent_recalc,
......@@ -451,7 +455,8 @@ static struct arm_idlect1_clk lb_ck = {
.clk = {
.name = "lb_ck",
.parent = &tc_ck.clk,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IDLE_CONTROL,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_LBCK,
.recalc = &followparent_recalc,
......@@ -495,8 +500,8 @@ static struct arm_idlect1_clk lcd_ck_1510 = {
.clk = {
.name = "lcd_ck",
.parent = &ck_dpll1,
.flags = CLOCK_IN_OMAP1510 | RATE_CKCTL |
CLOCK_IDLE_CONTROL,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
RATE_CKCTL | CLOCK_IDLE_CONTROL,
.enable_reg = (void __iomem *)ARM_IDLECT2,
.enable_bit = EN_LCDCK,
.rate_offset = CKCTL_LCDDIV_OFFSET,
......@@ -512,8 +517,9 @@ static struct clk uart1_1510 = {
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 29, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
......@@ -544,8 +550,8 @@ static struct clk uart2_ck = {
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
CLOCK_IN_OMAP310 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 30, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
......@@ -559,8 +565,9 @@ static struct clk uart3_1510 = {
/* Direct from ULPD, no real parent */
.parent = &armper_ck.clk,
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | ENABLE_REG_32BIT |
ALWAYS_ENABLED | CLOCK_NO_IDLE_PARENT,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
ENABLE_REG_32BIT | ALWAYS_ENABLED |
CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 31, /* Chooses between 12MHz and 48MHz */
.set_rate = &omap1_set_uart_rate,
......@@ -590,7 +597,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */
/* Direct from ULPD, no parent */
.rate = 6000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_FIXED | ENABLE_REG_32BIT,
CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = (void __iomem *)ULPD_CLOCK_CTRL,
.enable_bit = USB_MCLK_EN_BIT,
.enable = &omap1_clk_enable_generic,
......@@ -601,7 +608,7 @@ static struct clk usb_hhc_ck1510 = {
.name = "usb_hhc_ck",
/* Direct from ULPD, no parent */
.rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
.flags = CLOCK_IN_OMAP1510 |
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 |
RATE_FIXED | ENABLE_REG_32BIT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = USB_HOST_HHC_UHOST_EN,
......@@ -637,7 +644,9 @@ static struct clk mclk_1510 = {
.name = "mclk",
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | RATE_FIXED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
.enable_reg = (void __iomem *)SOFT_REQ_REG,
.enable_bit = 6,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
......@@ -659,7 +668,7 @@ static struct clk bclk_1510 = {
.name = "bclk",
/* Direct from ULPD, no parent. May be enabled by ext hardware. */
.rate = 12000000,
.flags = CLOCK_IN_OMAP1510 | RATE_FIXED,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP310 | RATE_FIXED,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
......@@ -678,12 +687,14 @@ static struct clk bclk_16xx = {
};
static struct clk mmc1_ck = {
.name = "mmc1_ck",
.name = "mmc_ck",
.id = 1,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
CLOCK_IN_OMAP310 | RATE_FIXED | ENABLE_REG_32BIT |
CLOCK_NO_IDLE_PARENT,
.enable_reg = (void __iomem *)MOD_CONF_CTRL_0,
.enable_bit = 23,
.enable = &omap1_clk_enable_generic,
......@@ -691,7 +702,8 @@ static struct clk mmc1_ck = {
};
static struct clk mmc2_ck = {
.name = "mmc2_ck",
.name = "mmc_ck",
.id = 2,
/* Functional clock is direct from ULPD, interface clock is ARMPER */
.parent = &armper_ck.clk,
.rate = 48000000,
......@@ -706,7 +718,7 @@ static struct clk mmc2_ck = {
static struct clk virtual_ck_mpu = {
.name = "mpu",
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_CLOCK | ALWAYS_ENABLED,
CLOCK_IN_OMAP310 | VIRTUAL_CLOCK | ALWAYS_ENABLED,
.parent = &arm_ck, /* Is smarter alias for */
.recalc = &followparent_recalc,
.set_rate = &omap1_select_table_rate,
......@@ -715,6 +727,20 @@ static struct clk virtual_ck_mpu = {
.disable = &omap1_clk_disable_generic,
};
/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
remains active during MPU idle whenever this is enabled */
static struct clk i2c_fck = {
.name = "i2c_fck",
.id = 1,
.flags = CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
VIRTUAL_CLOCK | CLOCK_NO_IDLE_PARENT |
ALWAYS_ENABLED,
.parent = &armxor_ck.clk,
.recalc = &followparent_recalc,
.enable = &omap1_clk_enable_generic,
.disable = &omap1_clk_disable_generic,
};
static struct clk * onchip_clks[] = {
/* non-ULPD clocks */
&ck_ref,
......@@ -763,6 +789,7 @@ static struct clk * onchip_clks[] = {
&mmc2_ck,
/* Virtual clocks */
&virtual_ck_mpu,
&i2c_fck,
};
#endif
......@@ -28,14 +28,14 @@
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include <asm/arch/prcm.h>
#include "prcm-regs.h"
#include "memory.h"
#include "clock.h"
//#define DOWN_VARIABLE_DPLL 1 /* Experimental */
static struct prcm_config *curr_prcm_set;
static struct memory_timings mem_timings;
static u32 curr_perf_level = PRCM_FULL_SPEED;
/*-------------------------------------------------------------------------
......@@ -54,11 +54,13 @@ static void omap2_sys_clk_recalc(struct clk * clk)
static u32 omap2_get_dpll_rate(struct clk * tclk)
{
int dpll_clk, dpll_mult, dpll_div, amult;
long long dpll_clk;
int dpll_mult, dpll_div, amult;
dpll_mult = (CM_CLKSEL1_PLL >> 12) & 0x03ff; /* 10 bits */
dpll_div = (CM_CLKSEL1_PLL >> 8) & 0x0f; /* 4 bits */
dpll_clk = (tclk->parent->rate * dpll_mult) / (dpll_div + 1);
dpll_clk = (long long)tclk->parent->rate * dpll_mult;
do_div(dpll_clk, dpll_div + 1);
amult = CM_CLKSEL2_PLL & 0x3;
dpll_clk *= amult;
......@@ -385,75 +387,23 @@ static u32 omap2_dll_force_needed(void)
return 0;
}
static void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
*/
#if 0 /* FIXME: Enable after 24xx cpu detection works */
ctype = get_cpu_type();
if (cpu_is_omap2422())
mem_timings.base_cs = 1;
else
#endif
mem_timings.base_cs = 0;
if (mem_timings.m_type != M_DDR)
return;
/* With DDR we need to determine the low frequency DLL value */
if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
mem_timings.dll_mode = M_UNLOCK;
else
mem_timings.dll_mode = M_LOCK;
if (mem_timings.base_cs == 0) {
fast_dll = SDRC_DLLA_CTRL;
dll_cnt = SDRC_DLLA_STATUS & 0xff00;
} else {
fast_dll = SDRC_DLLB_CTRL;
dll_cnt = SDRC_DLLB_STATUS & 0xff00;
}
if (force_lock_to_unlock_mode) {
fast_dll &= ~0xff00;
fast_dll |= dll_cnt; /* Current lock mode */
}
mem_timings.fast_dll_ctrl = fast_dll;
/* No disruptions, DDR will be offline & C-ABI not followed */
omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
mem_timings.fast_dll_ctrl,
mem_timings.base_cs,
force_lock_to_unlock_mode);
mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
/* Turn status into unlock ctrl */
mem_timings.slow_dll_ctrl |=
((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
/* 90 degree phase for anything below 133Mhz */
mem_timings.slow_dll_ctrl |= (1 << 1);
}
static u32 omap2_reprogram_sdrc(u32 level, u32 force)
{
u32 slow_dll_ctrl, fast_dll_ctrl, m_type;
u32 prev = curr_perf_level, flags;
if ((curr_perf_level == level) && !force)
return prev;
m_type = omap2_memory_get_type();
slow_dll_ctrl = omap2_memory_get_slow_dll_ctrl();
fast_dll_ctrl = omap2_memory_get_fast_dll_ctrl();
if (level == PRCM_HALF_SPEED) {
local_irq_save(flags);
PRCM_VOLTSETUP = 0xffff;
omap2_sram_reprogram_sdrc(PRCM_HALF_SPEED,
mem_timings.slow_dll_ctrl,
mem_timings.m_type);
slow_dll_ctrl, m_type);
curr_perf_level = PRCM_HALF_SPEED;
local_irq_restore(flags);
}
......@@ -461,8 +411,7 @@ static u32 omap2_reprogram_sdrc(u32 level, u32 force)
local_irq_save(flags);
PRCM_VOLTSETUP = 0xffff;
omap2_sram_reprogram_sdrc(PRCM_FULL_SPEED,
mem_timings.fast_dll_ctrl,
mem_timings.m_type);
fast_dll_ctrl, m_type);
curr_perf_level = PRCM_FULL_SPEED;
local_irq_restore(flags);
}
......@@ -650,7 +599,7 @@ static u32 omap2_get_clksel(u32 *div_sel, u32 *field_mask,
case 13: /* dss2 */
mask = 0x1; break;
case 25: /* usb */
mask = 0xf; break;
mask = 0x7; break;
}
}
......
......@@ -33,20 +33,6 @@ static u32 omap2_clksel_get_divisor(struct clk *clk);
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
#define M_UNLOCK 0
#define M_LOCK 1
struct memory_timings {
u32 m_type; /* ddr = 1, sdr = 0 */
u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
u32 base_cs; /* base chip select to use for calculations */
};
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
* CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
......@@ -731,6 +717,16 @@ static struct clk sys_clkout2 = {
.recalc = &omap2_clksel_recalc,
};
static struct clk emul_ck = {
.name = "emul_ck",
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&PRCM_CLKEMUL_CTRL,
.enable_bit = 0,
.recalc = &omap2_propagate_rate,
};
/*
* MPU clock domain
* Clocks:
......@@ -1702,7 +1698,8 @@ static struct clk hdq_fck = {
};
static struct clk i2c2_ick = {
.name = "i2c2_ick",
.name = "i2c_ick",
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
......@@ -1711,7 +1708,8 @@ static struct clk i2c2_ick = {
};
static struct clk i2c2_fck = {
.name = "i2c2_fck",
.name = "i2c_fck",
.id = 2,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
......@@ -1729,7 +1727,8 @@ static struct clk i2chs2_fck = {
};
static struct clk i2c1_ick = {
.name = "i2c1_ick",
.name = "i2c_ick",
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
......@@ -1738,7 +1737,8 @@ static struct clk i2c1_ick = {
};
static struct clk i2c1_fck = {
.name = "i2c1_fck",
.name = "i2c_fck",
.id = 1,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
......@@ -1971,6 +1971,7 @@ static struct clk *onchip_clks[] = {
&wdt1_osc_ck,
&sys_clkout,
&sys_clkout2,
&emul_ck,
/* mpu domain clocks */
&mpu_ck,
/* dsp domain clocks */
......
/*
* linux/arch/arm/mach-omap2/memory.c
*
* Memory timing related functions for OMAP24XX
*
* Copyright (C) 2005 Texas Instruments Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Copyright (C) 2005 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/sram.h>
#include "prcm-regs.h"
#include "memory.h"
static struct memory_timings mem_timings;
u32 omap2_memory_get_slow_dll_ctrl(void)
{
return mem_timings.slow_dll_ctrl;
}
u32 omap2_memory_get_fast_dll_ctrl(void)
{
return mem_timings.fast_dll_ctrl;
}
u32 omap2_memory_get_type(void)
{
return mem_timings.m_type;
}
void omap2_init_memory_params(u32 force_lock_to_unlock_mode)
{
unsigned long dll_cnt;
u32 fast_dll = 0;
mem_timings.m_type = !((SDRC_MR_0 & 0x3) == 0x1); /* DDR = 1, SDR = 0 */
/* 2422 es2.05 and beyond has a single SIP DDR instead of 2 like others.
* In the case of 2422, its ok to use CS1 instead of CS0.
*/
if (cpu_is_omap2422())
mem_timings.base_cs = 1;
else
mem_timings.base_cs = 0;
if (mem_timings.m_type != M_DDR)
return;
/* With DDR we need to determine the low frequency DLL value */
if (((mem_timings.fast_dll_ctrl & (1 << 2)) == M_LOCK_CTRL))
mem_timings.dll_mode = M_UNLOCK;
else
mem_timings.dll_mode = M_LOCK;
if (mem_timings.base_cs == 0) {
fast_dll = SDRC_DLLA_CTRL;
dll_cnt = SDRC_DLLA_STATUS & 0xff00;
} else {
fast_dll = SDRC_DLLB_CTRL;
dll_cnt = SDRC_DLLB_STATUS & 0xff00;
}
if (force_lock_to_unlock_mode) {
fast_dll &= ~0xff00;
fast_dll |= dll_cnt; /* Current lock mode */
}
/* set fast timings with DLL filter disabled */
mem_timings.fast_dll_ctrl = (fast_dll | (3 << 8));
/* No disruptions, DDR will be offline & C-ABI not followed */
omap2_sram_ddr_init(&mem_timings.slow_dll_ctrl,
mem_timings.fast_dll_ctrl,
mem_timings.base_cs,
force_lock_to_unlock_mode);
mem_timings.slow_dll_ctrl &= 0xff00; /* Keep lock value */
/* Turn status into unlock ctrl */
mem_timings.slow_dll_ctrl |=
((mem_timings.fast_dll_ctrl & 0xF) | (1 << 2));
/* 90 degree phase for anything below 133Mhz + disable DLL filter */
mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8));
}
/*
* linux/arch/arm/mach-omap2/memory.h
*
* Interface for memory timing related functions for OMAP24XX
*
* Copyright (C) 2005 Texas Instruments Inc.
* Richard Woodruff <r-woodruff2@ti.com>
*
* Copyright (C) 2005 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* Memory timings */
#define M_DDR 1
#define M_LOCK_CTRL (1 << 2)
#define M_UNLOCK 0
#define M_LOCK 1
struct memory_timings {
u32 m_type; /* ddr = 1, sdr = 0 */
u32 dll_mode; /* use lock mode = 1, unlock mode = 0 */
u32 slow_dll_ctrl; /* unlock mode, dll value for slow speed */
u32 fast_dll_ctrl; /* unlock mode, dll value for fast speed */
u32 base_cs; /* base chip select to use for calculations */
};
extern void omap2_init_memory_params(u32 force_lock_to_unlock_mode);
extern u32 omap2_memory_get_slow_dll_ctrl(void);
extern u32 omap2_memory_get_fast_dll_ctrl(void);
extern u32 omap2_memory_get_type(void);
/*
* prcm.h - Access definations for use in OMAP24XX clock and power management
* linux/arch/arm/mach-omap2/prcm-reg.h
*
* OMAP24XX Power Reset and Clock Management (PRCM) registers
*
* Copyright (C) 2005 Texas Instruments, Inc.
*
......@@ -18,8 +20,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
#define __ASM_ARM_ARCH_DPM_PRCM_H
#ifndef __ARCH_ARM_MACH_OMAP2_PRCM_H
#define __ARCH_ARM_MACH_OMAP2_PRCM_H
/* SET_PERFORMANCE_LEVEL PARAMETERS */
#define PRCM_HALF_SPEED 1
......@@ -159,54 +161,63 @@
#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
#define CM_IDLEST_MDM PRCM_REG32(0xC20)
#define CM_AUTOIDLE_MDM PRCM_REG32(0xC30)
#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
/* FIXME: Move to header for 2430 */
#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000)
#define CM_CLKSTCTRL_MDM PRCM_REG32(0xC48)
#define RM_RSTCTRL_MDM PRCM_REG32(0xC50)
#define RM_RSTST_MDM PRCM_REG32(0xC58)
#define PM_WKEN_MDM PRCM_REG32(0xCA0)
#define PM_WKST_MDM PRCM_REG32(0xCB0)
#define PM_WKDEP_MDM PRCM_REG32(0xCC8)
#define PM_PWSTCTRL_MDM PRCM_REG32(0xCE0)
#define PM_PWSTST_MDM PRCM_REG32(0xCE4)
#define OMAP24XX_L4_IO_BASE 0x48000000
#define DISP_BASE (OMAP24XX_L4_IO_BASE + 0x50000)
#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
#define GPMC_BASE (OMAP24XX_GPMC_BASE)
#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset))
#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000)
#define GPMC_REG32(offset) __REG32(OMAP24XX_GPMC_BASE + (offset))
#define GPT1_BASE (OMAP24XX_GPT1)
/* FIXME: Move these to timer code */
#define GPT1_BASE (0x48028000)
#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
/* Misc sysconfig */
#define DISPC_SYSCONFIG DISP_REG32(0x410)
#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000)
#define SPI_BASE (OMAP24XX_L4_IO_BASE + 0x98000)
#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10)
//#define DSP_MMU_SYSCONFIG 0x5A000010
#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10)
//#define IVA_MMU_SYSCONFIG 0x5D000010
//#define DSP_DMA_SYSCONFIG 0x00FCC02C
#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C)
#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C)
#define MCSPI2_SYSCONFIG __REG32(SPI_BASE + 0x2000 + 0x10)
#define MCSPI3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0xb8010)
#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE + 0x2C10)
#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE + 0x282C)
#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE + 0x602C)
#define GPMC_SYSCONFIG GPMC_REG32(0x010)
#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010)
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054)
//#define IVA_SYSCONFIG 0x5C060010
#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010)
//#define VLYNQ_SYSCONFIG 0x67FFFE10
#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x94010)
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE + 0x6E054)
#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE + 0x10)
#define OMAP24XX_SMS_BASE (L3_24XX_BASE + 0x8000)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE + 0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE + 0x8010)
/* rkw - good cannidates for PM_ to start what nm was trying */
#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000)
#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE + 0x2A000)
#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE + 0x78000)
#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE + 0x7A000)
#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE + 0x7C000)
#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE + 0x7E000)
#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE + 0x80000)
#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE + 0x82000)
#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE + 0x84000)
#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE + 0x86000)
#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE + 0x88000)
#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE + 0x8A000)
/* FIXME: Move these to timer code */
#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
......@@ -220,12 +231,18 @@
#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
/* FIXME: Move these to gpio code */
#define OMAP24XX_GPIO_BASE 0x48018000
#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE + (0x2000 * ((X) - 1)))
#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1) + 0x10))
#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2) + 0x10))
#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3) + 0x10))
#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4) + 0x10))
#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10))
#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10))
#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10))
#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10))
#if defined(CONFIG_ARCH_OMAP243X)
#define GPIO5_SYSCONFIG __REG32((OMAP24XX_GPIO5_BASE + 0x10))
#endif
/* GP TIMER 1 */
#define GPTIMER1_TISTAT GPT1_REG32(0x014)
......@@ -243,15 +260,15 @@
#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
/* rkw -- base fix up please... */
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018)
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE + 0x78018)
/* SDRC */
#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060)
#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064)
#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068)
#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C)
#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070)
#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084)
#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x060)
#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x064)
#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE + 0x068)
#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE + 0x06C)
#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE + 0x070)
#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE + 0x084)
/* GPIO 1 */
#define GPIO1_BASE GPIOX_BASE(1)
......@@ -278,6 +295,8 @@
#define GPIO2_DATAIN GPIO2_REG32(0x038)
#define GPIO2_OE GPIO2_REG32(0x034)
#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
#define GPIO2_DEBOUNCENABLE GPIO2_REG32(0x050)
#define GPIO2_DEBOUNCINGTIME GPIO2_REG32(0x054)
/* GPIO 3 */
#define GPIO3_BASE GPIOX_BASE(3)
......@@ -294,6 +313,8 @@
#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
/* GPIO 4 */
#define GPIO4_BASE GPIOX_BASE(4)
......@@ -311,10 +332,26 @@
#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
#if defined(CONFIG_ARCH_OMAP243X)
/* GPIO 5 */
#define GPIO5_REG32(offset) __REG32((OMAP24XX_GPIO5_BASE + (offset)))
#define GPIO5_IRQENABLE1 GPIO5_REG32(0x01C)
#define GPIO5_IRQSTATUS1 GPIO5_REG32(0x018)
#define GPIO5_IRQENABLE2 GPIO5_REG32(0x02C)
#define GPIO5_IRQSTATUS2 GPIO5_REG32(0x028)
#define GPIO5_WAKEUPENABLE GPIO5_REG32(0x020)
#define GPIO5_RISINGDETECT GPIO5_REG32(0x048)
#define GPIO5_FALLINGDETECT GPIO5_REG32(0x04C)
#define GPIO5_DATAIN GPIO5_REG32(0x038)
#define GPIO5_OE GPIO5_REG32(0x034)
#define GPIO5_DATAOUT GPIO5_REG32(0x03C)
#define GPIO5_DEBOUNCENABLE GPIO5_REG32(0x050)
#define GPIO5_DEBOUNCINGTIME GPIO5_REG32(0x054)
#endif
/* IO CONFIG */
#define CONTROL_BASE (OMAP24XX_CTRL_BASE)
#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset))
#define OMAP24XX_CTRL_BASE (L4_24XX_BASE)
#define CONTROL_REG32(offset) __REG32(OMAP24XX_CTRL_BASE + (offset))
#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
......@@ -322,15 +359,18 @@
#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC)
#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC) /* 2420 */
#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
#define CONTROL_PADCONF_SYS_NIRQW0 CONTROL_REG32(0x0BC) /* 2430 */
#define CONTROL_PADCONF_SSI1_FLAG_TX CONTROL_REG32(0x108) /* 2430 */
/* CONTROL */
#define CONTROL_DEVCONF CONTROL_REG32(0x274)
#define CONTROL_DEVCONF1 CONTROL_REG32(0x2E8)
/* INTERRUPT CONTROLLER */
#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000)
#define INTC_BASE ((L4_24XX_BASE) + 0xfe000)
#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
#define INTC1_U_BASE INTC_REG32(0x000)
......@@ -348,10 +388,12 @@
#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
#define INTC_SIR_IRQ INTC_REG32(0x040)
#define INTC_CONTROL INTC_REG32(0x048)
#define INTC_ILR11 INTC_REG32(0x12C)
#define INTC_ILR11 INTC_REG32(0x12C) /* PRCM on MPU PIC */
#define INTC_ILR30 INTC_REG32(0x178)
#define INTC_ILR31 INTC_REG32(0x17C)
#define INTC_ILR32 INTC_REG32(0x180)
#define INTC_ILR37 INTC_REG32(0x194)
#define INTC_SYSCONFIG INTC_REG32(0x010)
#define INTC_ILR37 INTC_REG32(0x194) /* GPIO4 on MPU PIC */
#define INTC_SYSCONFIG INTC_REG32(0x010) /* GPT1 on MPU PIC */
/* RAM FIREWALL */
#define RAMFW_BASE (0x68005000)
......@@ -373,6 +415,24 @@
#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
/* GPMC CS1 */
#define GPMC_CONFIG1_1 GPMC_REG32(0x090)
#define GPMC_CONFIG2_1 GPMC_REG32(0x094)
#define GPMC_CONFIG3_1 GPMC_REG32(0x098)
#define GPMC_CONFIG4_1 GPMC_REG32(0x09C)
#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0)
#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4)
#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8)
/* GPMC CS3 */
#define GPMC_CONFIG1_3 GPMC_REG32(0x0F0)
#define GPMC_CONFIG2_3 GPMC_REG32(0x0F4)
#define GPMC_CONFIG3_3 GPMC_REG32(0x0F8)
#define GPMC_CONFIG4_3 GPMC_REG32(0x0FC)
#define GPMC_CONFIG5_3 GPMC_REG32(0x100)
#define GPMC_CONFIG6_3 GPMC_REG32(0x104)
#define GPMC_CONFIG7_3 GPMC_REG32(0x108)
/* DSS */
#define DSS_CONTROL DISP_REG32(0x040)
#define DISPC_CONTROL DISP_REG32(0x440)
......@@ -405,11 +465,15 @@
#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
/* Wake up define for board */
#define GPIO97 (1 << 1)
#define GPIO88 (1 << 24)
/* HSUSB Suspend */
#define HSUSB_CTRL __REG8(0x480AC001)
#define USBOTG_POWER __REG32(0x480AC000)
/* HS MMC */
#define MMCHS1_SYSCONFIG __REG32(0x4809C010)
#define MMCHS2_SYSCONFIG __REG32(0x480b4010)
#endif /* __ASSEMBLER__ */
#endif /* __ASSEMBLER__ */
#endif
......
/*
* linux/arch/arm/mach-omap2/prcm.c
*
* OMAP 24xx Power Reset and Clock Management (PRCM) functions
*
* Copyright (C) 2005 Nokia Corporation
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/clk.h>
#include "prcm-regs.h"
u32 omap_prcm_get_reset_sources(void)
{
return RM_RSTST_WKUP & 0x7f;
}
EXPORT_SYMBOL(omap_prcm_get_reset_sources);
/* Resets clock rates and reboots the system. Only called from system.h */
void omap_prcm_arch_reset(char mode)
{
u32 rate;
struct clk *vclk, *sclk;
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
rate = clk_get_rate(sclk);
clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */
RM_RSTCTRL_WKUP |= 2;
}
......@@ -21,6 +21,7 @@
#include <linux/string.h>
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/semaphore.h>
......@@ -37,17 +38,37 @@ static struct clk_functions *arch_clock;
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
/*
* Returns a clock. Note that we first try to use device id on the bus
* and clock name. If this fails, we try to use clock name only.
*/
struct clk * clk_get(struct device *dev, const char *id)
{
struct clk *p, *clk = ERR_PTR(-ENOENT);
int idno;
if (dev == NULL || dev->bus != &platform_bus_type)
idno = -1;
else
idno = to_platform_device(dev)->id;
mutex_lock(&clocks_mutex);
list_for_each_entry(p, &clocks, node) {
if (p->id == idno &&
strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
list_for_each_entry(p, &clocks, node) {
if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
clk = p;
break;
}
}
mutex_unlock(&clocks_mutex);
return clk;
......@@ -59,6 +80,9 @@ int clk_enable(struct clk *clk)
unsigned long flags;
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_enable)
ret = arch_clock->clk_enable(clk);
......@@ -72,6 +96,9 @@ void clk_disable(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
......@@ -84,6 +111,9 @@ int clk_get_usecount(struct clk *clk)
unsigned long flags;
int ret = 0;
if (clk == NULL || IS_ERR(clk))
return 0;
spin_lock_irqsave(&clockfw_lock, flags);
ret = clk->usecount;
spin_unlock_irqrestore(&clockfw_lock, flags);
......@@ -97,6 +127,9 @@ unsigned long clk_get_rate(struct clk *clk)
unsigned long flags;
unsigned long ret = 0;
if (clk == NULL || IS_ERR(clk))
return 0;
spin_lock_irqsave(&clockfw_lock, flags);
ret = clk->rate;
spin_unlock_irqrestore(&clockfw_lock, flags);
......@@ -121,6 +154,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
unsigned long flags;
long ret = 0;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_round_rate)
ret = arch_clock->clk_round_rate(clk, rate);
......@@ -133,7 +169,10 @@ EXPORT_SYMBOL(clk_round_rate);
int clk_set_rate(struct clk *clk, unsigned long rate)
{
unsigned long flags;
int ret = 0;
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_set_rate)
......@@ -147,7 +186,10 @@ EXPORT_SYMBOL(clk_set_rate);
int clk_set_parent(struct clk *clk, struct clk *parent)
{
unsigned long flags;
int ret = 0;
int ret = -EINVAL;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_set_parent)
......@@ -163,6 +205,9 @@ struct clk *clk_get_parent(struct clk *clk)
unsigned long flags;
struct clk * ret = NULL;
if (clk == NULL || IS_ERR(clk))
return ret;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_get_parent)
ret = arch_clock->clk_get_parent(clk);
......@@ -199,6 +244,9 @@ __setup("mpurate=", omap_clk_setup);
/* Used for clocks that always have same value as the parent clock */
void followparent_recalc(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
clk->rate = clk->parent->rate;
}
......@@ -207,6 +255,9 @@ void propagate_rate(struct clk * tclk)
{
struct clk *clkp;
if (tclk == NULL || IS_ERR(tclk))
return;
list_for_each_entry(clkp, &clocks, node) {
if (likely(clkp->parent != tclk))
continue;
......@@ -217,6 +268,9 @@ void propagate_rate(struct clk * tclk)
int clk_register(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
mutex_lock(&clocks_mutex);
list_add(&clk->node, &clocks);
if (clk->init)
......@@ -229,6 +283,9 @@ EXPORT_SYMBOL(clk_register);
void clk_unregister(struct clk *clk)
{
if (clk == NULL || IS_ERR(clk))
return;
mutex_lock(&clocks_mutex);
list_del(&clk->node);
mutex_unlock(&clocks_mutex);
......@@ -239,6 +296,9 @@ void clk_deny_idle(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_deny_idle)
arch_clock->clk_deny_idle(clk);
......@@ -250,6 +310,9 @@ void clk_allow_idle(struct clk *clk)
{
unsigned long flags;
if (clk == NULL || IS_ERR(clk))
return;
spin_lock_irqsave(&clockfw_lock, flags);
if (arch_clock->clk_allow_idle)
arch_clock->clk_allow_idle(clk);
......
......@@ -19,6 +19,7 @@ struct clk {
struct list_head node;
struct module *owner;
const char *name;
int id;
struct clk *parent;
unsigned long rate;
__u32 flags;
......@@ -57,6 +58,7 @@ extern void propagate_rate(struct clk *clk);
extern void followparent_recalc(struct clk * clk);
extern void clk_allow_idle(struct clk *clk);
extern void clk_deny_idle(struct clk *clk);
extern int clk_get_usecount(struct clk *clk);
/* Clock flags */
#define RATE_CKCTL (1 << 0) /* Main fixed ratio clocks */
......@@ -80,10 +82,11 @@ extern void clk_deny_idle(struct clk *clk);
#define CM_PLL_SEL1 (1 << 18)
#define CM_PLL_SEL2 (1 << 19)
#define CM_SYSCLKOUT_SEL1 (1 << 20)
#define CLOCK_IN_OMAP730 (1 << 21)
#define CLOCK_IN_OMAP1510 (1 << 22)
#define CLOCK_IN_OMAP16XX (1 << 23)
#define CLOCK_IN_OMAP242X (1 << 24)
#define CLOCK_IN_OMAP243X (1 << 25)
#define CLOCK_IN_OMAP310 (1 << 21)
#define CLOCK_IN_OMAP730 (1 << 22)
#define CLOCK_IN_OMAP1510 (1 << 23)
#define CLOCK_IN_OMAP16XX (1 << 24)
#define CLOCK_IN_OMAP242X (1 << 25)
#define CLOCK_IN_OMAP243X (1 << 26)
#endif
/*
* prcm.h - Access definations for use in OMAP24XX clock and power management
* linux/include/asm-arm/arch-omap/prcm.h
*
* Access definations for use in OMAP24XX clock and power management
*
* Copyright (C) 2005 Texas Instruments, Inc.
*
......@@ -21,405 +23,7 @@
#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
#define __ASM_ARM_ARCH_DPM_PRCM_H
/* SET_PERFORMANCE_LEVEL PARAMETERS */
#define PRCM_HALF_SPEED 1
#define PRCM_FULL_SPEED 2
#ifndef __ASSEMBLER__
#define PRCM_REG32(offset) __REG32(OMAP24XX_PRCM_BASE + (offset))
#define PRCM_REVISION PRCM_REG32(0x000)
#define PRCM_SYSCONFIG PRCM_REG32(0x010)
#define PRCM_IRQSTATUS_MPU PRCM_REG32(0x018)
#define PRCM_IRQENABLE_MPU PRCM_REG32(0x01C)
#define PRCM_VOLTCTRL PRCM_REG32(0x050)
#define PRCM_VOLTST PRCM_REG32(0x054)
#define PRCM_CLKSRC_CTRL PRCM_REG32(0x060)
#define PRCM_CLKOUT_CTRL PRCM_REG32(0x070)
#define PRCM_CLKEMUL_CTRL PRCM_REG32(0x078)
#define PRCM_CLKCFG_CTRL PRCM_REG32(0x080)
#define PRCM_CLKCFG_STATUS PRCM_REG32(0x084)
#define PRCM_VOLTSETUP PRCM_REG32(0x090)
#define PRCM_CLKSSETUP PRCM_REG32(0x094)
#define PRCM_POLCTRL PRCM_REG32(0x098)
/* GENERAL PURPOSE */
#define GENERAL_PURPOSE1 PRCM_REG32(0x0B0)
#define GENERAL_PURPOSE2 PRCM_REG32(0x0B4)
#define GENERAL_PURPOSE3 PRCM_REG32(0x0B8)
#define GENERAL_PURPOSE4 PRCM_REG32(0x0BC)
#define GENERAL_PURPOSE5 PRCM_REG32(0x0C0)
#define GENERAL_PURPOSE6 PRCM_REG32(0x0C4)
#define GENERAL_PURPOSE7 PRCM_REG32(0x0C8)
#define GENERAL_PURPOSE8 PRCM_REG32(0x0CC)
#define GENERAL_PURPOSE9 PRCM_REG32(0x0D0)
#define GENERAL_PURPOSE10 PRCM_REG32(0x0D4)
#define GENERAL_PURPOSE11 PRCM_REG32(0x0D8)
#define GENERAL_PURPOSE12 PRCM_REG32(0x0DC)
#define GENERAL_PURPOSE13 PRCM_REG32(0x0E0)
#define GENERAL_PURPOSE14 PRCM_REG32(0x0E4)
#define GENERAL_PURPOSE15 PRCM_REG32(0x0E8)
#define GENERAL_PURPOSE16 PRCM_REG32(0x0EC)
#define GENERAL_PURPOSE17 PRCM_REG32(0x0F0)
#define GENERAL_PURPOSE18 PRCM_REG32(0x0F4)
#define GENERAL_PURPOSE19 PRCM_REG32(0x0F8)
#define GENERAL_PURPOSE20 PRCM_REG32(0x0FC)
/* MPU */
#define CM_CLKSEL_MPU PRCM_REG32(0x140)
#define CM_CLKSTCTRL_MPU PRCM_REG32(0x148)
#define RM_RSTST_MPU PRCM_REG32(0x158)
#define PM_WKDEP_MPU PRCM_REG32(0x1C8)
#define PM_EVGENCTRL_MPU PRCM_REG32(0x1D4)
#define PM_EVEGENONTIM_MPU PRCM_REG32(0x1D8)
#define PM_EVEGENOFFTIM_MPU PRCM_REG32(0x1DC)
#define PM_PWSTCTRL_MPU PRCM_REG32(0x1E0)
#define PM_PWSTST_MPU PRCM_REG32(0x1E4)
/* CORE */
#define CM_FCLKEN1_CORE PRCM_REG32(0x200)
#define CM_FCLKEN2_CORE PRCM_REG32(0x204)
#define CM_FCLKEN3_CORE PRCM_REG32(0x208)
#define CM_ICLKEN1_CORE PRCM_REG32(0x210)
#define CM_ICLKEN2_CORE PRCM_REG32(0x214)
#define CM_ICLKEN3_CORE PRCM_REG32(0x218)
#define CM_ICLKEN4_CORE PRCM_REG32(0x21C)
#define CM_IDLEST1_CORE PRCM_REG32(0x220)
#define CM_IDLEST2_CORE PRCM_REG32(0x224)
#define CM_IDLEST3_CORE PRCM_REG32(0x228)
#define CM_IDLEST4_CORE PRCM_REG32(0x22C)
#define CM_AUTOIDLE1_CORE PRCM_REG32(0x230)
#define CM_AUTOIDLE2_CORE PRCM_REG32(0x234)
#define CM_AUTOIDLE3_CORE PRCM_REG32(0x238)
#define CM_AUTOIDLE4_CORE PRCM_REG32(0x23C)
#define CM_CLKSEL1_CORE PRCM_REG32(0x240)
#define CM_CLKSEL2_CORE PRCM_REG32(0x244)
#define CM_CLKSTCTRL_CORE PRCM_REG32(0x248)
#define PM_WKEN1_CORE PRCM_REG32(0x2A0)
#define PM_WKEN2_CORE PRCM_REG32(0x2A4)
#define PM_WKST1_CORE PRCM_REG32(0x2B0)
#define PM_WKST2_CORE PRCM_REG32(0x2B4)
#define PM_WKDEP_CORE PRCM_REG32(0x2C8)
#define PM_PWSTCTRL_CORE PRCM_REG32(0x2E0)
#define PM_PWSTST_CORE PRCM_REG32(0x2E4)
/* GFX */
#define CM_FCLKEN_GFX PRCM_REG32(0x300)
#define CM_ICLKEN_GFX PRCM_REG32(0x310)
#define CM_IDLEST_GFX PRCM_REG32(0x320)
#define CM_CLKSEL_GFX PRCM_REG32(0x340)
#define CM_CLKSTCTRL_GFX PRCM_REG32(0x348)
#define RM_RSTCTRL_GFX PRCM_REG32(0x350)
#define RM_RSTST_GFX PRCM_REG32(0x358)
#define PM_WKDEP_GFX PRCM_REG32(0x3C8)
#define PM_PWSTCTRL_GFX PRCM_REG32(0x3E0)
#define PM_PWSTST_GFX PRCM_REG32(0x3E4)
/* WAKE-UP */
#define CM_FCLKEN_WKUP PRCM_REG32(0x400)
#define CM_ICLKEN_WKUP PRCM_REG32(0x410)
#define CM_IDLEST_WKUP PRCM_REG32(0x420)
#define CM_AUTOIDLE_WKUP PRCM_REG32(0x430)
#define CM_CLKSEL_WKUP PRCM_REG32(0x440)
#define RM_RSTCTRL_WKUP PRCM_REG32(0x450)
#define RM_RSTTIME_WKUP PRCM_REG32(0x454)
#define RM_RSTST_WKUP PRCM_REG32(0x458)
#define PM_WKEN_WKUP PRCM_REG32(0x4A0)
#define PM_WKST_WKUP PRCM_REG32(0x4B0)
/* CLOCKS */
#define CM_CLKEN_PLL PRCM_REG32(0x500)
#define CM_IDLEST_CKGEN PRCM_REG32(0x520)
#define CM_AUTOIDLE_PLL PRCM_REG32(0x530)
#define CM_CLKSEL1_PLL PRCM_REG32(0x540)
#define CM_CLKSEL2_PLL PRCM_REG32(0x544)
/* DSP */
#define CM_FCLKEN_DSP PRCM_REG32(0x800)
#define CM_ICLKEN_DSP PRCM_REG32(0x810)
#define CM_IDLEST_DSP PRCM_REG32(0x820)
#define CM_AUTOIDLE_DSP PRCM_REG32(0x830)
#define CM_CLKSEL_DSP PRCM_REG32(0x840)
#define CM_CLKSTCTRL_DSP PRCM_REG32(0x848)
#define RM_RSTCTRL_DSP PRCM_REG32(0x850)
#define RM_RSTST_DSP PRCM_REG32(0x858)
#define PM_WKEN_DSP PRCM_REG32(0x8A0)
#define PM_WKDEP_DSP PRCM_REG32(0x8C8)
#define PM_PWSTCTRL_DSP PRCM_REG32(0x8E0)
#define PM_PWSTST_DSP PRCM_REG32(0x8E4)
#define PRCM_IRQSTATUS_DSP PRCM_REG32(0x8F0)
#define PRCM_IRQENABLE_DSP PRCM_REG32(0x8F4)
/* IVA */
#define PRCM_IRQSTATUS_IVA PRCM_REG32(0x8F8)
#define PRCM_IRQENABLE_IVA PRCM_REG32(0x8FC)
/* Modem on 2430 */
#define CM_FCLKEN_MDM PRCM_REG32(0xC00)
#define CM_ICLKEN_MDM PRCM_REG32(0xC10)
#define CM_IDLEST_MDM PRCM_REG32(0xC20)
#define CM_CLKSEL_MDM PRCM_REG32(0xC40)
/* FIXME: Move to header for 2430 */
#define DISP_BASE (OMAP24XX_L4_IO_BASE+0x50000)
#define DISP_REG32(offset) __REG32(DISP_BASE + (offset))
#define OMAP24XX_GPMC_BASE (L3_24XX_BASE + 0xa000)
#define GPMC_BASE (OMAP24XX_GPMC_BASE)
#define GPMC_REG32(offset) __REG32(GPMC_BASE + (offset))
#define GPT1_BASE (OMAP24XX_GPT1)
#define GPT1_REG32(offset) __REG32(GPT1_BASE + (offset))
/* Misc sysconfig */
#define DISPC_SYSCONFIG DISP_REG32(0x410)
#define SPI_BASE (OMAP24XX_L4_IO_BASE+0x98000)
#define MCSPI1_SYSCONFIG __REG32(SPI_BASE + 0x10)
#define MCSPI2_SYSCONFIG __REG32(SPI_BASE+0x2000 + 0x10)
//#define DSP_MMU_SYSCONFIG 0x5A000010
#define CAMERA_MMU_SYSCONFIG __REG32(DISP_BASE+0x2C10)
//#define IVA_MMU_SYSCONFIG 0x5D000010
//#define DSP_DMA_SYSCONFIG 0x00FCC02C
#define CAMERA_DMA_SYSCONFIG __REG32(DISP_BASE+0x282C)
#define SYSTEM_DMA_SYSCONFIG __REG32(DISP_BASE+0x602C)
#define GPMC_SYSCONFIG GPMC_REG32(0x010)
#define MAILBOXES_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x94010)
#define UART1_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6A054)
#define UART2_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6C054)
#define UART3_SYSCONFIG __REG32(OMAP24XX_L4_IO_BASE+0x6E054)
//#define IVA_SYSCONFIG 0x5C060010
#define SDRC_SYSCONFIG __REG32(OMAP24XX_SDRC_BASE+0x10)
#define SMS_SYSCONFIG __REG32(OMAP24XX_SMS_BASE+0x10)
#define SSI_SYSCONFIG __REG32(DISP_BASE+0x8010)
//#define VLYNQ_SYSCONFIG 0x67FFFE10
/* rkw - good cannidates for PM_ to start what nm was trying */
#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000)
#define GPTIMER1_SYSCONFIG GPT1_REG32(0x010)
#define GPTIMER2_SYSCONFIG __REG32(OMAP24XX_GPT2 + 0x10)
#define GPTIMER3_SYSCONFIG __REG32(OMAP24XX_GPT3 + 0x10)
#define GPTIMER4_SYSCONFIG __REG32(OMAP24XX_GPT4 + 0x10)
#define GPTIMER5_SYSCONFIG __REG32(OMAP24XX_GPT5 + 0x10)
#define GPTIMER6_SYSCONFIG __REG32(OMAP24XX_GPT6 + 0x10)
#define GPTIMER7_SYSCONFIG __REG32(OMAP24XX_GPT7 + 0x10)
#define GPTIMER8_SYSCONFIG __REG32(OMAP24XX_GPT8 + 0x10)
#define GPTIMER9_SYSCONFIG __REG32(OMAP24XX_GPT9 + 0x10)
#define GPTIMER10_SYSCONFIG __REG32(OMAP24XX_GPT10 + 0x10)
#define GPTIMER11_SYSCONFIG __REG32(OMAP24XX_GPT11 + 0x10)
#define GPTIMER12_SYSCONFIG __REG32(OMAP24XX_GPT12 + 0x10)
#define GPIOX_BASE(X) (OMAP24XX_GPIO_BASE+(0x2000*((X)-1)))
#define GPIO1_SYSCONFIG __REG32((GPIOX_BASE(1)+0x10))
#define GPIO2_SYSCONFIG __REG32((GPIOX_BASE(2)+0x10))
#define GPIO3_SYSCONFIG __REG32((GPIOX_BASE(3)+0x10))
#define GPIO4_SYSCONFIG __REG32((GPIOX_BASE(4)+0x10))
/* GP TIMER 1 */
#define GPTIMER1_TISTAT GPT1_REG32(0x014)
#define GPTIMER1_TISR GPT1_REG32(0x018)
#define GPTIMER1_TIER GPT1_REG32(0x01C)
#define GPTIMER1_TWER GPT1_REG32(0x020)
#define GPTIMER1_TCLR GPT1_REG32(0x024)
#define GPTIMER1_TCRR GPT1_REG32(0x028)
#define GPTIMER1_TLDR GPT1_REG32(0x02C)
#define GPTIMER1_TTGR GPT1_REG32(0x030)
#define GPTIMER1_TWPS GPT1_REG32(0x034)
#define GPTIMER1_TMAR GPT1_REG32(0x038)
#define GPTIMER1_TCAR1 GPT1_REG32(0x03C)
#define GPTIMER1_TSICR GPT1_REG32(0x040)
#define GPTIMER1_TCAR2 GPT1_REG32(0x044)
/* rkw -- base fix up please... */
#define GPTIMER3_TISR __REG32(OMAP24XX_L4_IO_BASE+0x78018)
/* SDRC */
#define SDRC_DLLA_CTRL __REG32(OMAP24XX_SDRC_BASE+0x060)
#define SDRC_DLLA_STATUS __REG32(OMAP24XX_SDRC_BASE+0x064)
#define SDRC_DLLB_CTRL __REG32(OMAP24XX_SDRC_BASE+0x068)
#define SDRC_DLLB_STATUS __REG32(OMAP24XX_SDRC_BASE+0x06C)
#define SDRC_POWER __REG32(OMAP24XX_SDRC_BASE+0x070)
#define SDRC_MR_0 __REG32(OMAP24XX_SDRC_BASE+0x084)
/* GPIO 1 */
#define GPIO1_BASE GPIOX_BASE(1)
#define GPIO1_REG32(offset) __REG32(GPIO1_BASE + (offset))
#define GPIO1_IRQENABLE1 GPIO1_REG32(0x01C)
#define GPIO1_IRQSTATUS1 GPIO1_REG32(0x018)
#define GPIO1_IRQENABLE2 GPIO1_REG32(0x02C)
#define GPIO1_IRQSTATUS2 GPIO1_REG32(0x028)
#define GPIO1_WAKEUPENABLE GPIO1_REG32(0x020)
#define GPIO1_RISINGDETECT GPIO1_REG32(0x048)
#define GPIO1_DATAIN GPIO1_REG32(0x038)
#define GPIO1_OE GPIO1_REG32(0x034)
#define GPIO1_DATAOUT GPIO1_REG32(0x03C)
/* GPIO2 */
#define GPIO2_BASE GPIOX_BASE(2)
#define GPIO2_REG32(offset) __REG32(GPIO2_BASE + (offset))
#define GPIO2_IRQENABLE1 GPIO2_REG32(0x01C)
#define GPIO2_IRQSTATUS1 GPIO2_REG32(0x018)
#define GPIO2_IRQENABLE2 GPIO2_REG32(0x02C)
#define GPIO2_IRQSTATUS2 GPIO2_REG32(0x028)
#define GPIO2_WAKEUPENABLE GPIO2_REG32(0x020)
#define GPIO2_RISINGDETECT GPIO2_REG32(0x048)
#define GPIO2_DATAIN GPIO2_REG32(0x038)
#define GPIO2_OE GPIO2_REG32(0x034)
#define GPIO2_DATAOUT GPIO2_REG32(0x03C)
/* GPIO 3 */
#define GPIO3_BASE GPIOX_BASE(3)
#define GPIO3_REG32(offset) __REG32(GPIO3_BASE + (offset))
#define GPIO3_IRQENABLE1 GPIO3_REG32(0x01C)
#define GPIO3_IRQSTATUS1 GPIO3_REG32(0x018)
#define GPIO3_IRQENABLE2 GPIO3_REG32(0x02C)
#define GPIO3_IRQSTATUS2 GPIO3_REG32(0x028)
#define GPIO3_WAKEUPENABLE GPIO3_REG32(0x020)
#define GPIO3_RISINGDETECT GPIO3_REG32(0x048)
#define GPIO3_FALLINGDETECT GPIO3_REG32(0x04C)
#define GPIO3_DATAIN GPIO3_REG32(0x038)
#define GPIO3_OE GPIO3_REG32(0x034)
#define GPIO3_DATAOUT GPIO3_REG32(0x03C)
#define GPIO3_DEBOUNCENABLE GPIO3_REG32(0x050)
#define GPIO3_DEBOUNCINGTIME GPIO3_REG32(0x054)
/* GPIO 4 */
#define GPIO4_BASE GPIOX_BASE(4)
#define GPIO4_REG32(offset) __REG32(GPIO4_BASE + (offset))
#define GPIO4_IRQENABLE1 GPIO4_REG32(0x01C)
#define GPIO4_IRQSTATUS1 GPIO4_REG32(0x018)
#define GPIO4_IRQENABLE2 GPIO4_REG32(0x02C)
#define GPIO4_IRQSTATUS2 GPIO4_REG32(0x028)
#define GPIO4_WAKEUPENABLE GPIO4_REG32(0x020)
#define GPIO4_RISINGDETECT GPIO4_REG32(0x048)
#define GPIO4_FALLINGDETECT GPIO4_REG32(0x04C)
#define GPIO4_DATAIN GPIO4_REG32(0x038)
#define GPIO4_OE GPIO4_REG32(0x034)
#define GPIO4_DATAOUT GPIO4_REG32(0x03C)
#define GPIO4_DEBOUNCENABLE GPIO4_REG32(0x050)
#define GPIO4_DEBOUNCINGTIME GPIO4_REG32(0x054)
/* IO CONFIG */
#define CONTROL_BASE (OMAP24XX_CTRL_BASE)
#define CONTROL_REG32(offset) __REG32(CONTROL_BASE + (offset))
#define CONTROL_PADCONF_SPI1_NCS2 CONTROL_REG32(0x104)
#define CONTROL_PADCONF_SYS_XTALOUT CONTROL_REG32(0x134)
#define CONTROL_PADCONF_UART1_RX CONTROL_REG32(0x0C8)
#define CONTROL_PADCONF_MCBSP1_DX CONTROL_REG32(0x10C)
#define CONTROL_PADCONF_GPMC_NCS4 CONTROL_REG32(0x090)
#define CONTROL_PADCONF_DSS_D5 CONTROL_REG32(0x0B8)
#define CONTROL_PADCONF_DSS_D9 CONTROL_REG32(0x0BC)
#define CONTROL_PADCONF_DSS_D13 CONTROL_REG32(0x0C0)
#define CONTROL_PADCONF_DSS_VSYNC CONTROL_REG32(0x0CC)
/* CONTROL */
#define CONTROL_DEVCONF CONTROL_REG32(0x274)
/* INTERRUPT CONTROLLER */
#define INTC_BASE (OMAP24XX_L4_IO_BASE+0xfe000)
#define INTC_REG32(offset) __REG32(INTC_BASE + (offset))
#define INTC1_U_BASE INTC_REG32(0x000)
#define INTC_MIR0 INTC_REG32(0x084)
#define INTC_MIR_SET0 INTC_REG32(0x08C)
#define INTC_MIR_CLEAR0 INTC_REG32(0x088)
#define INTC_ISR_CLEAR0 INTC_REG32(0x094)
#define INTC_MIR1 INTC_REG32(0x0A4)
#define INTC_MIR_SET1 INTC_REG32(0x0AC)
#define INTC_MIR_CLEAR1 INTC_REG32(0x0A8)
#define INTC_ISR_CLEAR1 INTC_REG32(0x0B4)
#define INTC_MIR2 INTC_REG32(0x0C4)
#define INTC_MIR_SET2 INTC_REG32(0x0CC)
#define INTC_MIR_CLEAR2 INTC_REG32(0x0C8)
#define INTC_ISR_CLEAR2 INTC_REG32(0x0D4)
#define INTC_SIR_IRQ INTC_REG32(0x040)
#define INTC_CONTROL INTC_REG32(0x048)
#define INTC_ILR11 INTC_REG32(0x12C)
#define INTC_ILR32 INTC_REG32(0x180)
#define INTC_ILR37 INTC_REG32(0x194)
#define INTC_SYSCONFIG INTC_REG32(0x010)
/* RAM FIREWALL */
#define RAMFW_BASE (0x68005000)
#define RAMFW_REG32(offset) __REG32(RAMFW_BASE + (offset))
#define RAMFW_REQINFOPERM0 RAMFW_REG32(0x048)
#define RAMFW_READPERM0 RAMFW_REG32(0x050)
#define RAMFW_WRITEPERM0 RAMFW_REG32(0x058)
/* GPMC CS1 FPGA ON USER INTERFACE MODULE */
//#define DEBUG_BOARD_LED_REGISTER 0x04000014
/* GPMC CS0 */
#define GPMC_CONFIG1_0 GPMC_REG32(0x060)
#define GPMC_CONFIG2_0 GPMC_REG32(0x064)
#define GPMC_CONFIG3_0 GPMC_REG32(0x068)
#define GPMC_CONFIG4_0 GPMC_REG32(0x06C)
#define GPMC_CONFIG5_0 GPMC_REG32(0x070)
#define GPMC_CONFIG6_0 GPMC_REG32(0x074)
#define GPMC_CONFIG7_0 GPMC_REG32(0x078)
/* GPMC CS1 */
#define GPMC_CONFIG1_1 GPMC_REG32(0x090)
#define GPMC_CONFIG2_1 GPMC_REG32(0x094)
#define GPMC_CONFIG3_1 GPMC_REG32(0x098)
#define GPMC_CONFIG4_1 GPMC_REG32(0x09C)
#define GPMC_CONFIG5_1 GPMC_REG32(0x0a0)
#define GPMC_CONFIG6_1 GPMC_REG32(0x0a4)
#define GPMC_CONFIG7_1 GPMC_REG32(0x0a8)
/* DSS */
#define DSS_CONTROL DISP_REG32(0x040)
#define DISPC_CONTROL DISP_REG32(0x440)
#define DISPC_SYSSTATUS DISP_REG32(0x414)
#define DISPC_IRQSTATUS DISP_REG32(0x418)
#define DISPC_IRQENABLE DISP_REG32(0x41C)
#define DISPC_CONFIG DISP_REG32(0x444)
#define DISPC_DEFAULT_COLOR0 DISP_REG32(0x44C)
#define DISPC_DEFAULT_COLOR1 DISP_REG32(0x450)
#define DISPC_TRANS_COLOR0 DISP_REG32(0x454)
#define DISPC_TRANS_COLOR1 DISP_REG32(0x458)
#define DISPC_LINE_NUMBER DISP_REG32(0x460)
#define DISPC_TIMING_H DISP_REG32(0x464)
#define DISPC_TIMING_V DISP_REG32(0x468)
#define DISPC_POL_FREQ DISP_REG32(0x46C)
#define DISPC_DIVISOR DISP_REG32(0x470)
#define DISPC_SIZE_DIG DISP_REG32(0x478)
#define DISPC_SIZE_LCD DISP_REG32(0x47C)
#define DISPC_GFX_BA0 DISP_REG32(0x480)
#define DISPC_GFX_BA1 DISP_REG32(0x484)
#define DISPC_GFX_POSITION DISP_REG32(0x488)
#define DISPC_GFX_SIZE DISP_REG32(0x48C)
#define DISPC_GFX_ATTRIBUTES DISP_REG32(0x4A0)
#define DISPC_GFX_FIFO_THRESHOLD DISP_REG32(0x4A4)
#define DISPC_GFX_ROW_INC DISP_REG32(0x4AC)
#define DISPC_GFX_PIXEL_INC DISP_REG32(0x4B0)
#define DISPC_GFX_WINDOW_SKIP DISP_REG32(0x4B4)
#define DISPC_GFX_TABLE_BA DISP_REG32(0x4B8)
#define DISPC_DATA_CYCLE1 DISP_REG32(0x5D4)
#define DISPC_DATA_CYCLE2 DISP_REG32(0x5D8)
#define DISPC_DATA_CYCLE3 DISP_REG32(0x5DC)
/* Wake up define for board */
#define GPIO97 (1 << 1)
#define GPIO88 (1 << 24)
#endif /* __ASSEMBLER__ */
u32 omap_prcm_get_reset_sources(void);
#endif
......
......@@ -9,12 +9,13 @@
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/prcm.h>
#ifndef CONFIG_MACH_VOICEBLUE
#define voiceblue_reset() do {} while (0)
#endif
extern void omap_prcm_arch_reset(char mode);
static inline void arch_idle(void)
{
cpu_do_idle();
......@@ -38,24 +39,12 @@ static inline void omap1_arch_reset(char mode)
omap_writew(1, ARM_RSTCT1);
}
static inline void omap2_arch_reset(char mode)
{
u32 rate;
struct clk *vclk, *sclk;
vclk = clk_get(NULL, "virt_prcm_set");
sclk = clk_get(NULL, "sys_ck");
rate = clk_get_rate(sclk);
clk_set_rate(vclk, rate); /* go to bypass for OMAP limitation */
RM_RSTCTRL_WKUP |= 2;
}
static inline void arch_reset(char mode)
{
if (!cpu_is_omap24xx())
omap1_arch_reset(mode);
else
omap2_arch_reset(mode);
omap_prcm_arch_reset(mode);
}
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册