提交 aecd1fbe 编写于 作者: T Takashi Iwai

Merge tag 'asoc-fix-v5.10-rc4' of...

Merge tag 'asoc-fix-v5.10-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.11

A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
......@@ -8,10 +8,16 @@ Required properties:
- reg : The I2C address of the device.
Optional properties:
- realtek,power-up-delay-ms
Set a delay time for flush work to be completed,
this value is adjustable depending on platform.
Example:
rt1015: codec@28 {
compatible = "realtek,rt1015";
reg = <0x28>;
realtek,power-up-delay-ms = <50>;
};
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* linux/sound/rt1015.h -- Platform data for RT1015
*
* Copyright 2020 Realtek Microelectronics
*/
#ifndef __LINUX_SND_RT1015_H
#define __LINUX_SND_RT1015_H
struct rt1015_platform_data {
unsigned int power_up_delay_ms;
};
#endif
......@@ -27,10 +27,15 @@
#include <sound/soc-dapm.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include <sound/rt1015.h>
#include "rl6231.h"
#include "rt1015.h"
static const struct rt1015_platform_data i2s_default_platform_data = {
.power_up_delay_ms = 50,
};
static const struct reg_default rt1015_reg[] = {
{ 0x0000, 0x0000 },
{ 0x0004, 0xa000 },
......@@ -539,7 +544,7 @@ static void rt1015_flush_work(struct work_struct *work)
struct rt1015_priv *rt1015 = container_of(work, struct rt1015_priv,
flush_work.work);
struct snd_soc_component *component = rt1015->component;
unsigned int val, i = 0, count = 20;
unsigned int val, i = 0, count = 200;
while (i < count) {
usleep_range(1000, 1500);
......@@ -650,6 +655,7 @@ static int rt1015_amp_drv_event(struct snd_soc_dapm_widget *w,
case SND_SOC_DAPM_POST_PMU:
if (rt1015->hw_config == RT1015_HW_28)
schedule_delayed_work(&rt1015->flush_work, msecs_to_jiffies(10));
msleep(rt1015->pdata.power_up_delay_ms);
break;
default:
break;
......@@ -1067,9 +1073,16 @@ static struct acpi_device_id rt1015_acpi_match[] = {
MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match);
#endif
static void rt1015_parse_dt(struct rt1015_priv *rt1015, struct device *dev)
{
device_property_read_u32(dev, "realtek,power-up-delay-ms",
&rt1015->pdata.power_up_delay_ms);
}
static int rt1015_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct rt1015_platform_data *pdata = dev_get_platdata(&i2c->dev);
struct rt1015_priv *rt1015;
int ret;
unsigned int val;
......@@ -1081,6 +1094,13 @@ static int rt1015_i2c_probe(struct i2c_client *i2c,
i2c_set_clientdata(i2c, rt1015);
rt1015->pdata = i2s_default_platform_data;
if (pdata)
rt1015->pdata = *pdata;
else
rt1015_parse_dt(rt1015, &i2c->dev);
rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap);
if (IS_ERR(rt1015->regmap)) {
ret = PTR_ERR(rt1015->regmap);
......
......@@ -12,6 +12,7 @@
#ifndef __RT1015_H__
#define __RT1015_H__
#include <sound/rt1015.h>
#define RT1015_DEVICE_ID_VAL 0x1011
#define RT1015_DEVICE_ID_VAL2 0x1015
......@@ -380,6 +381,7 @@ enum {
struct rt1015_priv {
struct snd_soc_component *component;
struct rt1015_platform_data pdata;
struct regmap *regmap;
int sysclk;
int sysclk_src;
......
......@@ -700,6 +700,8 @@ static int kabylake_set_bias_level(struct snd_soc_card *card,
switch (level) {
case SND_SOC_BIAS_PREPARE:
if (dapm->bias_level == SND_SOC_BIAS_ON) {
if (!__clk_is_enabled(priv->mclk))
return 0;
dev_dbg(card->dev, "Disable mclk");
clk_disable_unprepare(priv->mclk);
} else {
......
......@@ -458,10 +458,6 @@ static int catpt_dai_prepare(struct snd_pcm_substream *substream,
if (ret)
return CATPT_IPC_ERROR(ret);
ret = catpt_dsp_update_lpclock(cdev);
if (ret)
return ret;
ret = catpt_dai_apply_usettings(dai, stream);
if (ret)
return ret;
......@@ -500,6 +496,7 @@ static int catpt_dai_trigger(struct snd_pcm_substream *substream, int cmd,
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
resume_stream:
catpt_dsp_update_lpclock(cdev);
ret = catpt_ipc_resume_stream(cdev, stream->info.stream_hw_id);
if (ret)
return CATPT_IPC_ERROR(ret);
......@@ -507,11 +504,11 @@ static int catpt_dai_trigger(struct snd_pcm_substream *substream, int cmd,
case SNDRV_PCM_TRIGGER_STOP:
stream->prepared = false;
catpt_dsp_update_lpclock(cdev);
fallthrough;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
ret = catpt_ipc_pause_stream(cdev, stream->info.stream_hw_id);
catpt_dsp_update_lpclock(cdev);
if (ret)
return CATPT_IPC_ERROR(ret);
break;
......@@ -534,6 +531,8 @@ void catpt_stream_update_position(struct catpt_dev *cdev,
dsppos = bytes_to_frames(r, pos->stream_position);
if (!stream->prepared)
goto exit;
/* only offload is set_write_pos driven */
if (stream->template->type != CATPT_STRM_TYPE_RENDER)
goto exit;
......
......@@ -487,9 +487,9 @@ static int kmb_dai_hw_params(struct snd_pcm_substream *substream,
kmb_i2s->xfer_resolution = 0x02;
break;
case SNDRV_PCM_FORMAT_S24_LE:
config->data_width = 24;
kmb_i2s->ccr = 0x08;
kmb_i2s->xfer_resolution = 0x04;
config->data_width = 32;
kmb_i2s->ccr = 0x14;
kmb_i2s->xfer_resolution = 0x05;
break;
case SNDRV_PCM_FORMAT_S32_LE:
config->data_width = 32;
......
......@@ -122,8 +122,10 @@ static int lpass_platform_pcmops_open(struct snd_soc_component *component,
else
dma_ch = 0;
if (dma_ch < 0)
if (dma_ch < 0) {
kfree(data);
return dma_ch;
}
if (cpu_dai->driver->id == LPASS_DP_RX) {
map = drvdata->hdmiif_map;
......@@ -147,6 +149,7 @@ static int lpass_platform_pcmops_open(struct snd_soc_component *component,
ret = snd_pcm_hw_constraint_integer(runtime,
SNDRV_PCM_HW_PARAM_PERIODS);
if (ret < 0) {
kfree(data);
dev_err(soc_runtime->dev, "setting constraints failed: %d\n",
ret);
return -EINVAL;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册