提交 ae16fc3c 编写于 作者: W Wey-Yi Guy 提交者: John W. Linville

iwlwifi: eliminate the possible 1/2 dBm tx power loss in 6x00 & 6x50 series

In both 6x00 and 6x50 series, the enhanced/extended tx power table in
EEPROM is used to set the max. tx power limit.
This new tx power table is in 1/2 dBm format, which creates an issue of
possibility of 1/2 dBm loss when driver set the tx power limit; because
of driver keep track and report the tx power in dBm format.

In order to prevent the 1/2 dBm loss, keep track of the true max tx
power in 1/2 dBm format in driver; do the comparison and adjust the tx
power if needed when send tx power command to uCode.
Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 4d6ccbf5
...@@ -1250,6 +1250,22 @@ int iwl5000_send_tx_power(struct iwl_priv *priv) ...@@ -1250,6 +1250,22 @@ int iwl5000_send_tx_power(struct iwl_priv *priv)
/* half dBm need to multiply */ /* half dBm need to multiply */
tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt); tx_power_cmd.global_lmt = (s8)(2 * priv->tx_power_user_lmt);
if (priv->tx_power_lmt_in_half_dbm &&
priv->tx_power_lmt_in_half_dbm < tx_power_cmd.global_lmt) {
/*
* For the newer devices which using enhanced/extend tx power
* table in EEPROM, the format is in half dBm. driver need to
* convert to dBm format before report to mac80211.
* By doing so, there is a possibility of 1/2 dBm resolution
* lost. driver will perform "round-up" operation before
* reporting, but it will cause 1/2 dBm tx power over the
* regulatory limit. Perform the checking here, if the
* "tx_power_user_lmt" is higher than EEPROM value (in
* half-dBm format), lower the tx power based on EEPROM
*/
tx_power_cmd.global_lmt = priv->tx_power_lmt_in_half_dbm;
}
tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED; tx_power_cmd.flags = IWL50_TX_POWER_NO_CLOSED;
tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO; tx_power_cmd.srv_chan_lmt = IWL50_TX_POWER_AUTO;
......
...@@ -1247,6 +1247,7 @@ struct iwl_priv { ...@@ -1247,6 +1247,7 @@ struct iwl_priv {
/* TX Power */ /* TX Power */
s8 tx_power_user_lmt; s8 tx_power_user_lmt;
s8 tx_power_device_lmt; s8 tx_power_device_lmt;
s8 tx_power_lmt_in_half_dbm; /* max tx power in half-dBm format */
#ifdef CONFIG_IWLWIFI_DEBUG #ifdef CONFIG_IWLWIFI_DEBUG
......
...@@ -762,7 +762,8 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv, ...@@ -762,7 +762,8 @@ static int iwl_mod_ht40_chan_info(struct iwl_priv *priv,
* find the highest tx power from all chains for the channel * find the highest tx power from all chains for the channel
*/ */
static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, int element) struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
int element, s8 *max_txpower_in_half_dbm)
{ {
s8 max_txpower_avg = 0; /* (dBm) */ s8 max_txpower_avg = 0; /* (dBm) */
...@@ -794,10 +795,14 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, ...@@ -794,10 +795,14 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
(enhanced_txpower[element].mimo3_max > max_txpower_avg)) (enhanced_txpower[element].mimo3_max > max_txpower_avg))
max_txpower_avg = enhanced_txpower[element].mimo3_max; max_txpower_avg = enhanced_txpower[element].mimo3_max;
/* max. tx power in EEPROM is in 1/2 dBm format /*
* convert from 1/2 dBm to dBm * max. tx power in EEPROM is in 1/2 dBm format
* convert from 1/2 dBm to dBm (round-up convert)
* but we also do not want to loss 1/2 dBm resolution which
* will impact performance
*/ */
return max_txpower_avg >> 1; *max_txpower_in_half_dbm = max_txpower_avg;
return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
} }
/** /**
...@@ -806,7 +811,7 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv, ...@@ -806,7 +811,7 @@ static s8 iwl_get_max_txpower_avg(struct iwl_priv *priv,
*/ */
static s8 iwl_update_common_txpower(struct iwl_priv *priv, static s8 iwl_update_common_txpower(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
int section, int element) int section, int element, s8 *max_txpower_in_half_dbm)
{ {
struct iwl_channel_info *ch_info; struct iwl_channel_info *ch_info;
int ch; int ch;
...@@ -820,20 +825,22 @@ static s8 iwl_update_common_txpower(struct iwl_priv *priv, ...@@ -820,20 +825,22 @@ static s8 iwl_update_common_txpower(struct iwl_priv *priv,
if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX) if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
is_ht40 = true; is_ht40 = true;
max_txpower_avg = max_txpower_avg =
iwl_get_max_txpower_avg(priv, enhanced_txpower, element); iwl_get_max_txpower_avg(priv, enhanced_txpower,
element, max_txpower_in_half_dbm);
ch_info = priv->channel_info; ch_info = priv->channel_info;
for (ch = 0; ch < priv->channel_count; ch++) { for (ch = 0; ch < priv->channel_count; ch++) {
/* find matching band and update tx power if needed */ /* find matching band and update tx power if needed */
if ((ch_info->band == enhinfo[section].band) && if ((ch_info->band == enhinfo[section].band) &&
(ch_info->max_power_avg < max_txpower_avg) && (!is_ht40)) { (ch_info->max_power_avg < max_txpower_avg) &&
(!is_ht40)) {
/* Update regulatory-based run-time data */ /* Update regulatory-based run-time data */
ch_info->max_power_avg = ch_info->curr_txpow = ch_info->max_power_avg = ch_info->curr_txpow =
max_txpower_avg; max_txpower_avg;
ch_info->scan_power = max_txpower_avg; ch_info->scan_power = max_txpower_avg;
} }
if ((ch_info->band == enhinfo[section].band) && is_ht40 && if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
ch_info->ht40_max_power_avg &&
(ch_info->ht40_max_power_avg < max_txpower_avg)) { (ch_info->ht40_max_power_avg < max_txpower_avg)) {
/* Update regulatory-based run-time data */ /* Update regulatory-based run-time data */
ch_info->ht40_max_power_avg = max_txpower_avg; ch_info->ht40_max_power_avg = max_txpower_avg;
...@@ -849,7 +856,7 @@ static s8 iwl_update_common_txpower(struct iwl_priv *priv, ...@@ -849,7 +856,7 @@ static s8 iwl_update_common_txpower(struct iwl_priv *priv,
*/ */
static s8 iwl_update_channel_txpower(struct iwl_priv *priv, static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower, struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
int section, int element) int section, int element, s8 *max_txpower_in_half_dbm)
{ {
struct iwl_channel_info *ch_info; struct iwl_channel_info *ch_info;
int ch; int ch;
...@@ -858,7 +865,8 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv, ...@@ -858,7 +865,8 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
channel = enhinfo[section].iwl_eeprom_section_channel[element]; channel = enhinfo[section].iwl_eeprom_section_channel[element];
max_txpower_avg = max_txpower_avg =
iwl_get_max_txpower_avg(priv, enhanced_txpower, element); iwl_get_max_txpower_avg(priv, enhanced_txpower,
element, max_txpower_in_half_dbm);
ch_info = priv->channel_info; ch_info = priv->channel_info;
for (ch = 0; ch < priv->channel_count; ch++) { for (ch = 0; ch < priv->channel_count; ch++) {
...@@ -872,7 +880,6 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv, ...@@ -872,7 +880,6 @@ static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
ch_info->scan_power = max_txpower_avg; ch_info->scan_power = max_txpower_avg;
} }
if ((enhinfo[section].is_ht40) && if ((enhinfo[section].is_ht40) &&
(ch_info->ht40_max_power_avg) &&
(ch_info->ht40_max_power_avg < max_txpower_avg)) { (ch_info->ht40_max_power_avg < max_txpower_avg)) {
/* Update regulatory-based run-time data */ /* Update regulatory-based run-time data */
ch_info->ht40_max_power_avg = max_txpower_avg; ch_info->ht40_max_power_avg = max_txpower_avg;
...@@ -894,6 +901,7 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) ...@@ -894,6 +901,7 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
struct iwl_eeprom_enhanced_txpwr *enhanced_txpower; struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
u32 offset; u32 offset;
s8 max_txpower_avg; /* (dBm) */ s8 max_txpower_avg; /* (dBm) */
s8 max_txpower_in_half_dbm; /* (half-dBm) */
/* Loop through all the sections /* Loop through all the sections
* adjust bands and channel's max tx power * adjust bands and channel's max tx power
...@@ -920,16 +928,29 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv) ...@@ -920,16 +928,29 @@ void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
if (enhinfo[section].is_common) if (enhinfo[section].is_common)
max_txpower_avg = max_txpower_avg =
iwl_update_common_txpower(priv, iwl_update_common_txpower(priv,
enhanced_txpower, section, element); enhanced_txpower, section,
element,
&max_txpower_in_half_dbm);
else else
max_txpower_avg = max_txpower_avg =
iwl_update_channel_txpower(priv, iwl_update_channel_txpower(priv,
enhanced_txpower, section, element); enhanced_txpower, section,
element,
&max_txpower_in_half_dbm);
/* Update the tx_power_user_lmt to the highest power /* Update the tx_power_user_lmt to the highest power
* supported by any channel */ * supported by any channel */
if (max_txpower_avg > priv->tx_power_user_lmt) if (max_txpower_avg > priv->tx_power_user_lmt)
priv->tx_power_user_lmt = max_txpower_avg; priv->tx_power_user_lmt = max_txpower_avg;
/*
* Update the tx_power_lmt_in_half_dbm to
* the highest power supported by any channel
*/
if (max_txpower_in_half_dbm >
priv->tx_power_lmt_in_half_dbm)
priv->tx_power_lmt_in_half_dbm =
max_txpower_in_half_dbm;
} }
} }
} }
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册