diff --git a/tools/testing/selftests/vm/run_vmtests b/tools/testing/selftests/vm/run_vmtests
index 584a91ae4a8f85e3c4dcf0baad7058abd8b3afea..951c507a27f7df05f82ce2de78abba2e0d9848f4 100755
--- a/tools/testing/selftests/vm/run_vmtests
+++ b/tools/testing/selftests/vm/run_vmtests
@@ -211,4 +211,20 @@ else
     echo "[PASS]"
 fi
 
+echo "------------------------------------"
+echo "running vmalloc stability smoke test"
+echo "------------------------------------"
+./test_vmalloc.sh smoke
+ret_val=$?
+
+if [ $ret_val -eq 0 ]; then
+	echo "[PASS]"
+elif [ $ret_val -eq $ksft_skip ]; then
+	 echo "[SKIP]"
+	 exitcode=$ksft_skip
+else
+	echo "[FAIL]"
+	exitcode=1
+fi
+
 exit $exitcode
diff --git a/tools/testing/selftests/vm/test_vmalloc.sh b/tools/testing/selftests/vm/test_vmalloc.sh
new file mode 100644
index 0000000000000000000000000000000000000000..06d2bb109f06d629889a08d03bb8692c715394b7
--- /dev/null
+++ b/tools/testing/selftests/vm/test_vmalloc.sh
@@ -0,0 +1,176 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (C) 2018 Uladzislau Rezki (Sony) <urezki@gmail.com>
+#
+# This is a test script for the kernel test driver to analyse vmalloc
+# allocator. Therefore it is just a kernel module loader. You can specify
+# and pass different parameters in order to:
+#     a) analyse performance of vmalloc allocations;
+#     b) stressing and stability check of vmalloc subsystem.
+
+TEST_NAME="vmalloc"
+DRIVER="test_${TEST_NAME}"
+
+# 1 if fails
+exitcode=1
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+#
+# Static templates for performance, stressing and smoke tests.
+# Also it is possible to pass any supported parameters manualy.
+#
+PERF_PARAM="single_cpu_test=1 sequential_test_order=1 test_repeat_count=3"
+SMOKE_PARAM="single_cpu_test=1 test_loop_count=10000 test_repeat_count=10"
+STRESS_PARAM="test_repeat_count=20"
+
+check_test_requirements()
+{
+	uid=$(id -u)
+	if [ $uid -ne 0 ]; then
+		echo "$0: Must be run as root"
+		exit $ksft_skip
+	fi
+
+	if ! which modprobe > /dev/null 2>&1; then
+		echo "$0: You need modprobe installed"
+		exit $ksft_skip
+	fi
+
+	if ! modinfo $DRIVER > /dev/null 2>&1; then
+		echo "$0: You must have the following enabled in your kernel:"
+		echo "CONFIG_TEST_VMALLOC=m"
+		exit $ksft_skip
+	fi
+}
+
+run_perfformance_check()
+{
+	echo "Run performance tests to evaluate how fast vmalloc allocation is."
+	echo "It runs all test cases on one single CPU with sequential order."
+
+	modprobe $DRIVER $PERF_PARAM > /dev/null 2>&1
+	echo "Done."
+	echo "Ccheck the kernel message buffer to see the summary."
+}
+
+run_stability_check()
+{
+	echo "Run stability tests. In order to stress vmalloc subsystem we run"
+	echo "all available test cases on all available CPUs simultaneously."
+	echo "It will take time, so be patient."
+
+	modprobe $DRIVER $STRESS_PARAM > /dev/null 2>&1
+	echo "Done."
+	echo "Check the kernel ring buffer to see the summary."
+}
+
+run_smoke_check()
+{
+	echo "Run smoke test. Note, this test provides basic coverage."
+	echo "Please check $0 output how it can be used"
+	echo "for deep performance analysis as well as stress testing."
+
+	modprobe $DRIVER $SMOKE_PARAM > /dev/null 2>&1
+	echo "Done."
+	echo "Check the kernel ring buffer to see the summary."
+}
+
+usage()
+{
+	echo -n "Usage: $0 [ performance ] | [ stress ] | | [ smoke ] | "
+	echo "manual parameters"
+	echo
+	echo "Valid tests and parameters:"
+	echo
+	modinfo $DRIVER
+	echo
+	echo "Example usage:"
+	echo
+	echo "# Shows help message"
+	echo "./${DRIVER}.sh"
+	echo
+	echo "# Runs 1 test(id_1), repeats it 5 times on all online CPUs"
+	echo "./${DRIVER}.sh run_test_mask=1 test_repeat_count=5"
+	echo
+	echo -n "# Runs 4 tests(id_1|id_2|id_4|id_16) on one CPU with "
+	echo "sequential order"
+	echo -n "./${DRIVER}.sh single_cpu_test=1 sequential_test_order=1 "
+	echo "run_test_mask=23"
+	echo
+	echo -n "# Runs all tests on all online CPUs, shuffled order, repeats "
+	echo "20 times"
+	echo "./${DRIVER}.sh test_repeat_count=20"
+	echo
+	echo "# Performance analysis"
+	echo "./${DRIVER}.sh performance"
+	echo
+	echo "# Stress testing"
+	echo "./${DRIVER}.sh stress"
+	echo
+	exit 0
+}
+
+function validate_passed_args()
+{
+	VALID_ARGS=`modinfo $DRIVER | awk '/parm:/ {print $2}' | sed 's/:.*//'`
+
+	#
+	# Something has been passed, check it.
+	#
+	for passed_arg in $@; do
+		key=${passed_arg//=*/}
+		val="${passed_arg:$((${#key}+1))}"
+		valid=0
+
+		for valid_arg in $VALID_ARGS; do
+			if [[ $key = $valid_arg ]] && [[ $val -gt 0 ]]; then
+				valid=1
+				break
+			fi
+		done
+
+		if [[ $valid -ne 1 ]]; then
+			echo "Error: key or value is not correct: ${key} $val"
+			exit $exitcode
+		fi
+	done
+}
+
+function run_manual_check()
+{
+	#
+	# Validate passed parameters. If there is wrong one,
+	# the script exists and does not execute further.
+	#
+	validate_passed_args $@
+
+	echo "Run the test with following parameters: $@"
+	modprobe $DRIVER $@ > /dev/null 2>&1
+	echo "Done."
+	echo "Check the kernel ring buffer to see the summary."
+}
+
+function run_test()
+{
+	if [ $# -eq 0 ]; then
+		usage
+	else
+		if [[ "$1" = "performance" ]]; then
+			run_perfformance_check
+		elif [[ "$1" = "stress" ]]; then
+			run_stability_check
+		elif [[ "$1" = "smoke" ]]; then
+			run_smoke_check
+		else
+			run_manual_check $@
+		fi
+	fi
+}
+
+check_test_requirements
+run_test $@
+
+exit 0